From 6fa612b56c575a5235568593eab4240c90608630 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 11 May 2009 15:49:12 +0200 Subject: microblaze: Kconfig: Enable drivers for Microblaze Signed-off-by: Michal Simek --- drivers/input/serio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index da3c3a5d2689..c4b3fbd1a80f 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -192,7 +192,7 @@ config SERIO_RAW config SERIO_XILINX_XPS_PS2 tristate "Xilinx XPS PS/2 Controller Support" - depends on PPC + depends on PPC || MICROBLAZE help This driver supports XPS PS/2 IP from the Xilinx EDK on PowerPC platform. -- cgit v1.2.1 From dc890c2dcd63a90de68ee5f0253eefbb89d725f0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 7 Jun 2009 23:27:31 +0100 Subject: [ARM] 5544/1: Trust PrimeCell resource sizes I found the PrimeCell/AMBA Bus drivers distrusting the resource passed in as part of the struct amba_device abstraction. This patch removes all hard coded resource sizes found in the PrimeCell drivers and move the responsibility of this definition back to the platform/board device definition, which already exist and appear to be correct for all in-tree users of these drivers. We do this using the resource_size() inline function which was also replicated in the only driver using the resource size, so that has been changed too. The KMI_SIZE was left in kmi.h in case someone likes it. Test-compiled against Versatile and Integrator defconfigs, seems to work but I don't posess these boards and cannot test them. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/input/serio/ambakmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index a28c06d686e1..89b394183a75 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -135,7 +135,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id) io->dev.parent = &dev->dev; kmi->io = io; - kmi->base = ioremap(dev->res.start, KMI_SIZE); + kmi->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!kmi->base) { ret = -ENOMEM; goto out; -- cgit v1.2.1 From 492d0f95e6927d60be6234c4b0dd500216e87e18 Mon Sep 17 00:00:00 2001 From: Alessio Igor Bogani Date: Thu, 21 May 2009 19:54:33 +0200 Subject: trivial: input/misc: Fix typo in Kconfig Signed-off-by: Alessio Igor Bogani Signed-off-by: Jiri Kosina --- drivers/input/misc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 5c0a631d1455..06f46fcc0772 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -232,7 +232,7 @@ config INPUT_GPIO_ROTARY_ENCODER depends on GPIOLIB && GENERIC_GPIO help Say Y here to add support for rotary encoders connected to GPIO lines. - Check file:Documentation/incput/rotary_encoder.txt for more + Check file:Documentation/input/rotary-encoder.txt for more information. To compile this driver as a module, choose M here: the -- cgit v1.2.1 From aa5ed63e96656bb246a9439e06c7b67d455a5aa1 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 30 Apr 2009 15:23:42 +0200 Subject: Driver Core: input: add nodename for input drivers This adds support to the input core to report the proper device name to userspace for their devices. Signed-off-by: Kay Sievers Signed-off-by: Jan Blunck Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/input.c b/drivers/input/input.c index 5d445f48789b..7c237e6ac711 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1265,8 +1265,14 @@ static struct device_type input_dev_type = { .uevent = input_dev_uevent, }; +static char *input_nodename(struct device *dev) +{ + return kasprintf(GFP_KERNEL, "input/%s", dev_name(dev)); +} + struct class input_class = { .name = "input", + .nodename = input_nodename, }; EXPORT_SYMBOL_GPL(input_class); -- cgit v1.2.1 From 017596b61f324946299fa94d9ef6f08b7478a3d8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 30 Apr 2009 14:43:31 -0700 Subject: input: remove driver_data direct access of struct device In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: Dmitry Torokhov Cc: linux-input@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/input/touchscreen/wm97xx-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 69af8385ab14..2957d48e0045 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -569,7 +569,7 @@ static int wm97xx_probe(struct device *dev) mutex_init(&wm->codec_mutex); wm->dev = dev; - dev->driver_data = wm; + dev_set_drvdata(dev, wm); wm->ac97 = to_ac97_t(dev); /* check that we have a supported codec */ -- cgit v1.2.1 From 1b713e00500c6f03317742981674e89a21629399 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 4 May 2009 12:40:54 -0700 Subject: xen: remove driver_data direct access of struct device from more drivers In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.osdl.org Acked-by: Chris Wright Cc: Jeremy Fitzhardinge Signed-off-by: Greg Kroah-Hartman --- drivers/input/xen-kbdfront.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 928d2ed8865f..b115726dc088 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -114,7 +114,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev, xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure"); return -ENOMEM; } - dev->dev.driver_data = info; + dev_set_drvdata(&dev->dev, info); info->xbdev = dev; info->irq = -1; snprintf(info->phys, sizeof(info->phys), "xenbus/%s", dev->nodename); @@ -186,7 +186,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev, static int xenkbd_resume(struct xenbus_device *dev) { - struct xenkbd_info *info = dev->dev.driver_data; + struct xenkbd_info *info = dev_get_drvdata(&dev->dev); xenkbd_disconnect_backend(info); memset(info->page, 0, PAGE_SIZE); @@ -195,7 +195,7 @@ static int xenkbd_resume(struct xenbus_device *dev) static int xenkbd_remove(struct xenbus_device *dev) { - struct xenkbd_info *info = dev->dev.driver_data; + struct xenkbd_info *info = dev_get_drvdata(&dev->dev); xenkbd_disconnect_backend(info); if (info->kbd) @@ -266,7 +266,7 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *info) static void xenkbd_backend_changed(struct xenbus_device *dev, enum xenbus_state backend_state) { - struct xenkbd_info *info = dev->dev.driver_data; + struct xenkbd_info *info = dev_get_drvdata(&dev->dev); int ret, val; switch (backend_state) { -- cgit v1.2.1 From 08604bd9935dc98fb62ef61d5b7baa7ccc10f8c2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 16 Jun 2009 15:31:12 -0700 Subject: time: move PIT_TICK_RATE to linux/timex.h PIT_TICK_RATE is currently defined in four architectures, but in three different places. While linux/timex.h is not the perfect place for it, it is still a reasonable replacement for those drivers that traditionally use asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency. Note that for Alpha, the actual value changed from 1193182UL to 1193180UL. This is unlikely to make a difference, and probably can only improve accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE a few years ago, after which every existing instance was getting changed to 1193182. According to the specification, it should be 1193181.818181... Signed-off-by: Arnd Bergmann Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Len Brown Cc: john stultz Cc: Dmitry Torokhov Cc: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/input/joystick/analog.c | 2 +- drivers/input/misc/pcspkr.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 356b3a25efa2..1c0b529c06aa 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -35,7 +35,7 @@ #include #include #include -#include +#include #define DRIVER_DESC "Analog joystick and gamepad driver" diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index d6a30cee7bc7..6d67af5387ad 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -17,6 +17,7 @@ #include #include #include +#include #include MODULE_AUTHOR("Vojtech Pavlik "); -- cgit v1.2.1 From 9230ccb1071d2d7e4ecb6314e67203b9f7f08140 Mon Sep 17 00:00:00 2001 From: Yan Li Date: Sun, 28 Jun 2009 22:30:56 -0700 Subject: Input: i8042 - more reset quirks for MSI Wind-clone netbooks When testing Moblin on various netbooks, we've got reports that many MSI Wind clones need the i8042 reset quirks for the keyboard and/or touchpad's proper function. Signed-off-by: Yan Li Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index fb8a3cd3ffd0..924e8ed7f2cf 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -392,6 +392,34 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), }, }, + { + .ident = "Acer Aspire One 150", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), + }, + }, + { + .ident = "Advent 4211", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"), + DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"), + }, + }, + { + .ident = "Medion Akoya Mini E1210", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E1210"), + }, + }, + { + .ident = "Mivvy M310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"), + DMI_MATCH(DMI_PRODUCT_NAME, "N10"), + }, + }, { } }; -- cgit v1.2.1 From c413ec446188ae53276eb60a60311b430448c6b0 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sun, 28 Jun 2009 22:50:58 -0700 Subject: Input: wacom - add DTF720a support and fix rotation on Intuos3 This patch adds DTF720a support and fixes an Intuos3 rotation pen out-proximity bug. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 38bf86384aeb..c896d6a21b7e 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -384,6 +384,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS2, 0); wacom_report_key(wcombo, BTN_TOUCH, 0); wacom_report_abs(wcombo, ABS_WHEEL, 0); + if (wacom->features->type >= INTUOS3S) + wacom_report_abs(wcombo, ABS_Z, 0); } wacom_report_key(wcombo, wacom->tool[idx], 0); wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ @@ -836,6 +838,7 @@ static struct wacom_features wacom_features[] = { { "Wacom DTU710", 8, 34080, 27660, 511, 0, PL }, { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, + { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL }, { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, @@ -897,8 +900,9 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, -- cgit v1.2.1 From ca865a77b5949f5c403e0f13de5a5a9cd499a11e Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Sun, 28 Jun 2009 22:38:44 -0700 Subject: Input: gpio-keys - revert 'change timer to workqueue' This reverts commit 0b346838c5862bfe911432956a106d602535d030. This commit breaks GPIO debouncing by replacing the original mod_timer with schedule_delayed_work in the interrupt handler. The latter does not kick the timer further on GPIO line changes as it should to perform debouncing. Signed-off-by: Jani Nikula Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 2157cd7de00c..9767213b6c8f 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -22,14 +22,13 @@ #include #include #include -#include #include struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; - struct delayed_work work; + struct timer_list timer; }; struct gpio_keys_drvdata { @@ -37,10 +36,8 @@ struct gpio_keys_drvdata { struct gpio_button_data data[0]; }; -static void gpio_keys_report_event(struct work_struct *work) +static void gpio_keys_report_event(struct gpio_button_data *bdata) { - struct gpio_button_data *bdata = - container_of(work, struct gpio_button_data, work.work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -50,17 +47,25 @@ static void gpio_keys_report_event(struct work_struct *work) input_sync(input); } +static void gpio_check_button(unsigned long _data) +{ + struct gpio_button_data *data = (struct gpio_button_data *)_data; + + gpio_keys_report_event(data); +} + static irqreturn_t gpio_keys_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; struct gpio_keys_button *button = bdata->button; - unsigned long delay; BUG_ON(irq != gpio_to_irq(button->gpio)); - delay = button->debounce_interval ? - msecs_to_jiffies(button->debounce_interval) : 0; - schedule_delayed_work(&bdata->work, delay); + if (button->debounce_interval) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(button->debounce_interval)); + else + gpio_keys_report_event(bdata); return IRQ_HANDLED; } @@ -107,7 +112,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; - INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event); + setup_timer(&bdata->timer, + gpio_check_button, (unsigned long)bdata); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -166,7 +172,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail2: while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); gpio_free(pdata->buttons[i].gpio); } @@ -190,7 +197,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); gpio_free(pdata->buttons[i].gpio); } -- cgit v1.2.1 From da0d03fe6cecde837f113a8a587f5a872d0fade0 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Sun, 28 Jun 2009 22:38:56 -0700 Subject: Input: gpio-keys - avoid possibility of sleeping in timer function The gpio_get_value function may sleep, so it should not be called in a timer function. Move gpio_get_value calls to workqueue. Signed-off-by: Jani Nikula Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 9767213b6c8f..efed0c9e242e 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -22,6 +22,7 @@ #include #include #include +#include #include @@ -29,6 +30,7 @@ struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; struct timer_list timer; + struct work_struct work; }; struct gpio_keys_drvdata { @@ -36,8 +38,10 @@ struct gpio_keys_drvdata { struct gpio_button_data data[0]; }; -static void gpio_keys_report_event(struct gpio_button_data *bdata) +static void gpio_keys_report_event(struct work_struct *work) { + struct gpio_button_data *bdata = + container_of(work, struct gpio_button_data, work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -47,11 +51,11 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata) input_sync(input); } -static void gpio_check_button(unsigned long _data) +static void gpio_keys_timer(unsigned long _data) { struct gpio_button_data *data = (struct gpio_button_data *)_data; - gpio_keys_report_event(data); + schedule_work(&data->work); } static irqreturn_t gpio_keys_isr(int irq, void *dev_id) @@ -65,7 +69,7 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id) mod_timer(&bdata->timer, jiffies + msecs_to_jiffies(button->debounce_interval)); else - gpio_keys_report_event(bdata); + schedule_work(&bdata->work); return IRQ_HANDLED; } @@ -113,7 +117,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; setup_timer(&bdata->timer, - gpio_check_button, (unsigned long)bdata); + gpio_keys_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, gpio_keys_report_event); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -174,6 +179,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); if (pdata->buttons[i].debounce_interval) del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } @@ -199,6 +205,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) free_irq(irq, &ddata->data[i]); if (pdata->buttons[i].debounce_interval) del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } -- cgit v1.2.1 From cb589529f74d69abc111887b45308f333f950ade Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 29 Jun 2009 00:00:52 -0700 Subject: Input: arrange keyboards alphabetically Hopefully it will reduce conflicts when merging patches. Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 291 ++++++++++++++++++++-------------------- drivers/input/keyboard/Makefile | 32 ++--- 2 files changed, 161 insertions(+), 162 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9d8f796c6745..d2df1030675a 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" + depends on MACH_AAED2000 + select INPUT_POLLDEV + default y + help + Say Y here to enable the keyboard on the Agilent AAED-2000 + development board. + + To compile this driver as a module, choose M here: the + module will be called aaed2000_kbd. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + config KEYBOARD_ATKBD tristate "AT keyboard" if EMBEDDED || !X86 default y @@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config KEYBOARD_SUNKBD - tristate "Sun Type 4 and Type 5 keyboard" - select SERIO - help - Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, - connected either to the Sun keyboard connector or to an serial - (RS-232) port via a simple adapter. - - To compile this driver as a module, choose M here: the - module will be called sunkbd. - -config KEYBOARD_LKKBD - tristate "DECstation/VAXstation LK201/LK401 keyboard" - select SERIO - help - Say Y here if you want to use a LK201 or LK401 style serial - keyboard. This keyboard is also useable on PCs if you attach - it with the inputattach program. The connector pinout is - described within lkkbd.c. - - To compile this driver as a module, choose M here: the - module will be called lkkbd. - -config KEYBOARD_LOCOMO - tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO && INPUT_KEYBOARD - help - Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA - - To compile this driver as a module, choose M here: the - module will be called locomokbd. - -config KEYBOARD_XTKBD - tristate "XT keyboard" - select SERIO - help - Say Y here if you want to use the old IBM PC/XT keyboard (or - compatible) on your system. This is only possible with a - parallel port keyboard adapter, you cannot connect it to the - keyboard port on a PC that runs Linux. - - To compile this driver as a module, choose M here: the - module will be called xtkbd. - -config KEYBOARD_NEWTON - tristate "Newton keyboard" - select SERIO - help - Say Y here if you have a Newton keyboard on a serial port. - - To compile this driver as a module, choose M here: the - module will be called newtonkbd. - -config KEYBOARD_STOWAWAY - tristate "Stowaway keyboard" - select SERIO +config KEYBOARD_BFIN + tristate "Blackfin BF54x keypad support" + depends on (BF54x && !BF544) help - Say Y here if you have a Stowaway keyboard on a serial port. - Stowaway compatible keyboards like Dicota Input-PDA keyboard - are also supported by this driver. + Say Y here if you want to use the BF54x keypad. To compile this driver as a module, choose M here: the - module will be called stowaway. + module will be called bf54x-keys. config KEYBOARD_CORGI tristate "Corgi keyboard" @@ -143,61 +124,41 @@ config KEYBOARD_CORGI To compile this driver as a module, choose M here: the module will be called corgikbd. -config KEYBOARD_SPITZ - tristate "Spitz keyboard" - depends on PXA_SHARPSL - default y +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. To compile this driver as a module, choose M here: the - module will be called spitzkbd. + module will be called lkkbd. -config KEYBOARD_TOSA - tristate "Tosa keyboard" - depends on MACH_TOSA - default y +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + Say Y here to enable the matrix keypad on the Cirrus EP93XX. To compile this driver as a module, choose M here: the - module will be called tosakbd. - -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - default n - help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! + module will be called ep93xx_keypad. -config KEYBOARD_AMIGA - tristate "Amiga keyboard" - depends on AMIGA +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GENERIC_GPIO help - Say Y here if you are running Linux on any AMIGA and have a keyboard - attached. - - To compile this driver as a module, choose M here: the - module will be called amikbd. - -config ATARI_KBD_CORE - bool + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). -config KEYBOARD_ATARI - tristate "Atari keyboard" - depends on ATARI - select ATARI_KBD_CORE - help - Say Y here if you are running Linux on any Atari and have a keyboard - attached. + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called atakbd. + module will be called gpio-keys. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -261,14 +222,33 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. -config KEYBOARD_OMAP - tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO help - Say Y here if you want to use the OMAP keypad. + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA To compile this driver as a module, choose M here: the - module will be called omap-keypad. + module will be called locomokbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" @@ -288,51 +268,38 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_AAED2000 - tristate "AAED-2000 keyboard" - depends on MACH_AAED2000 - select INPUT_POLLDEV +config KEYBOARD_SPITZ + tristate "Spitz keyboard" + depends on PXA_SHARPSL default y help - Say Y here to enable the keyboard on the Agilent AAED-2000 - development board. - - To compile this driver as a module, choose M here: the - module will be called aaed2000_kbd. - -config KEYBOARD_GPIO - tristate "GPIO Buttons" - depends on GENERIC_GPIO - help - This driver implements support for buttons connected - to GPIO pins of various CPUs (and some other chips). - - Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific - setup logic must also provide a platform device, - with configuration data saying which GPIOs are used. + Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, + SL-C3000 and Sl-C3100 series of PDAs. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called spitzkbd. -config KEYBOARD_MAPLE - tristate "Maple bus keyboard" - depends on SH_DREAMCAST && MAPLE +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO help - Say Y here if you have a Dreamcast console running Linux and have - a keyboard attached to its Maple bus. + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. To compile this driver as a module, choose M here: the - module will be called maple_keyb. + module will be called stowaway. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO help - Say Y here if you want to use the BF54x keypad. + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. To compile this driver as a module, choose M here: the - module will be called bf54x-keys. + module will be called sunkbd. config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" @@ -344,13 +311,45 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. -config KEYBOARD_EP93XX - tristate "EP93xx Matrix Keypad support" - depends on ARCH_EP93XX +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on (ARCH_OMAP1 || ARCH_OMAP2) help - Say Y here to enable the matrix keypad on the Cirrus EP93XX. + Say Y here if you want to use the OMAP keypad. To compile this driver as a module, choose M here: the - module will be called ep93xx_keypad. + module will be called omap-keypad. + +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 156b647a259b..632efbc18c44 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -4,29 +4,29 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o -obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o -obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o -obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o -obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o +obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o +obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o +obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o -obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o -obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o -obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o -obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o -obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o -obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o -- cgit v1.2.1 From bab7614d6d1b1fc96ec6c5a7ca34c8641060e659 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 29 Jun 2009 00:20:52 -0700 Subject: Input: add support for generic GPIO-based matrix keypad Original patch by Marek Vasut, modified by Eric in: 1. use delayed work to simplify the debouncing 2. combine col_polarity/row_polarity into a single active_low field 3. use a generic bit array based XOR algorithm to detect key press/release, which should make the column assertion time shorter and code a bit cleaner 4. remove the ALT_FN handling, which is no way generic, the ALT_FN key should be treated as no different from other keys, and translation will be done by user space by commands like 'loadkeys'. 5. explicitly disable row IRQs and flush potential pending work, and schedule an immediate scan after resuming as suggested by Uli Luckas 6. incorporate review comments from many others Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad controller, I have to configure those pins as generic GPIO to use this driver, works quite well, though), and Sharp Zaurus model SL-C7x0 and SL-C1000. [dtor@mail.ru: fix error unwinding path, support changing keymap from userspace] Signed-off-by: Marek Vasut Reviewed-by: Trilok Soni Reviewed-by: Uli Luckas Reviewed-by: Russell King Reviewed-by: Robert Jarzmik Signed-off-by: Eric Miao Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 13 +- drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/matrix_keypad.c | 453 +++++++++++++++++++++++++++++++++ 3 files changed, 465 insertions(+), 2 deletions(-) create mode 100644 drivers/input/keyboard/matrix_keypad.c (limited to 'drivers/input') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index d2df1030675a..a6b989a9dc07 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -158,7 +158,16 @@ config KEYBOARD_GPIO with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called gpio_keys. + +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GENERIC_GPIO + help + Enable support for GPIO driven matrix keypad. + + To compile this driver as a module, choose M here: the + module will be called matrix_keypad. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -254,7 +263,7 @@ config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx help - Enable support for PXA27x/PXA3xx keypad controller + Enable support for PXA27x/PXA3xx keypad controller. To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 632efbc18c44..b5b5eae9724f 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c new file mode 100644 index 000000000000..e9b2e7cb05be --- /dev/null +++ b/drivers/input/keyboard/matrix_keypad.c @@ -0,0 +1,453 @@ +/* + * GPIO driven matrix keyboard driver + * + * Copyright (c) 2008 Marek Vasut + * + * Based on corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct matrix_keypad { + const struct matrix_keypad_platform_data *pdata; + struct input_dev *input_dev; + unsigned short *keycodes; + + uint32_t last_key_state[MATRIX_MAX_COLS]; + struct delayed_work work; + bool scan_pending; + bool stopped; + spinlock_t lock; +}; + +/* + * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause + * minmal side effect when scanning other columns, here it is configured to + * be input, and it should work on most platforms. + */ +static void __activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + bool level_on = !pdata->active_low; + + if (on) { + gpio_direction_output(pdata->col_gpios[col], level_on); + } else { + gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); + gpio_direction_input(pdata->col_gpios[col]); + } +} + +static void activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + __activate_col(pdata, col, on); + + if (on && pdata->col_scan_delay_us) + udelay(pdata->col_scan_delay_us); +} + +static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, + bool on) +{ + int col; + + for (col = 0; col < pdata->num_col_gpios; col++) + __activate_col(pdata, col, on); +} + +static bool row_asserted(const struct matrix_keypad_platform_data *pdata, + int row) +{ + return gpio_get_value_cansleep(pdata->row_gpios[row]) ? + !pdata->active_low : pdata->active_low; +} + +static void enable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); +} + +static void disable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); +} + +/* + * This gets the keys from keyboard and reports it to input subsystem + */ +static void matrix_keypad_scan(struct work_struct *work) +{ + struct matrix_keypad *keypad = + container_of(work, struct matrix_keypad, work.work); + struct input_dev *input_dev = keypad->input_dev; + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + uint32_t new_state[MATRIX_MAX_COLS]; + int row, col, code; + + /* de-activate all columns for scanning */ + activate_all_cols(pdata, false); + + memset(new_state, 0, sizeof(new_state)); + + /* assert each column and read the row status out */ + for (col = 0; col < pdata->num_col_gpios; col++) { + + activate_col(pdata, col, true); + + for (row = 0; row < pdata->num_row_gpios; row++) + new_state[col] |= + row_asserted(pdata, row) ? (1 << row) : 0; + + activate_col(pdata, col, false); + } + + for (col = 0; col < pdata->num_col_gpios; col++) { + uint32_t bits_changed; + + bits_changed = keypad->last_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->num_row_gpios; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = (row << 4) + col; + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad->keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + + memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + + activate_all_cols(pdata, true); + + /* Enable IRQs again */ + spin_lock_irq(&keypad->lock); + keypad->scan_pending = false; + enable_row_irqs(keypad); + spin_unlock_irq(&keypad->lock); +} + +static irqreturn_t matrix_keypad_interrupt(int irq, void *id) +{ + struct matrix_keypad *keypad = id; + unsigned long flags; + + spin_lock_irqsave(&keypad->lock, flags); + + /* + * See if another IRQ beaten us to it and scheduled the + * scan already. In that case we should not try to + * disable IRQs again. + */ + if (unlikely(keypad->scan_pending || keypad->stopped)) + goto out; + + disable_row_irqs(keypad); + keypad->scan_pending = true; + schedule_delayed_work(&keypad->work, + msecs_to_jiffies(keypad->pdata->debounce_ms)); + +out: + spin_unlock_irqrestore(&keypad->lock, flags); + return IRQ_HANDLED; +} + +static int matrix_keypad_start(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = false; + mb(); + + /* + * Schedule an immediate key scan to capture current key state; + * columns will be activated and IRQs be enabled after the scan. + */ + schedule_delayed_work(&keypad->work, 0); + + return 0; +} + +static void matrix_keypad_stop(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = true; + mb(); + flush_work(&keypad->work.work); + /* + * matrix_keypad_scan() will leave IRQs enabled; + * we should disable them now. + */ + disable_row_irqs(keypad); +} + +#ifdef CONFIG_PM +static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + return 0; +} + +static int matrix_keypad_resume(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + matrix_keypad_start(keypad->input_dev); + + return 0; +} +#else +#define matrix_keypad_suspend NULL +#define matrix_keypad_resume NULL +#endif + +static int __devinit init_matrix_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i, err = -EINVAL; + + /* initialized strobe lines as outputs, activated */ + for (i = 0; i < pdata->num_col_gpios; i++) { + err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for COL%d\n", + pdata->col_gpios[i], i); + goto err_free_cols; + } + + gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for ROW%d\n", + pdata->row_gpios[i], i); + goto err_free_rows; + } + + gpio_direction_input(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } + } + + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); + return 0; + +err_free_irqs: + while (--i >= 0) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + i = pdata->num_row_gpios; +err_free_rows: + while (--i >= 0) + gpio_free(pdata->row_gpios[i]); + i = pdata->num_col_gpios; +err_free_cols: + while (--i >= 0) + gpio_free(pdata->col_gpios[i]); + + return err; +} + +static int __devinit matrix_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + const struct matrix_keymap_data *keymap_data; + struct matrix_keypad *keypad; + struct input_dev *input_dev; + unsigned short *keycodes; + int i; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!keymap_data->max_keymap_size) { + dev_err(&pdev->dev, "invalid keymap data supplied\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); + keycodes = kzalloc(keymap_data->max_keymap_size * + sizeof(keypad->keycodes), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !keycodes || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + keypad->input_dev = input_dev; + keypad->pdata = pdata; + keypad->keycodes = keycodes; + keypad->stopped = true; + INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); + spin_lock_init(&keypad->lock); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->open = matrix_keypad_start; + input_dev->close = matrix_keypad_stop; + + input_dev->keycode = keycodes; + input_dev->keycodesize = sizeof(*keycodes); + input_dev->keycodemax = keymap_data->max_keymap_size; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keycodes[(row << 4) + col] = code; + __set_bit(code, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + err = init_matrix_gpio(pdev, keypad); + if (err) + goto err_free_mem; + + err = input_register_device(keypad->input_dev); + if (err) + goto err_free_mem; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_mem: + input_free_device(input_dev); + kfree(keycodes); + kfree(keypad); + return err; +} + +static int __devexit matrix_keypad_remove(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + device_init_wakeup(&pdev->dev, 0); + + for (i = 0; i < pdata->num_row_gpios; i++) { + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + gpio_free(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); + + input_unregister_device(keypad->input_dev); + platform_set_drvdata(pdev, NULL); + kfree(keypad->keycodes); + kfree(keypad); + + return 0; +} + +static struct platform_driver matrix_keypad_driver = { + .probe = matrix_keypad_probe, + .remove = __devexit_p(matrix_keypad_remove), + .suspend = matrix_keypad_suspend, + .resume = matrix_keypad_resume, + .driver = { + .name = "matrix-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init matrix_keypad_init(void) +{ + return platform_driver_register(&matrix_keypad_driver); +} + +static void __exit matrix_keypad_exit(void) +{ + platform_driver_unregister(&matrix_keypad_driver); +} + +module_init(matrix_keypad_init); +module_exit(matrix_keypad_exit); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:matrix-keypad"); -- cgit v1.2.1 From ada8e9514b5880f81cdbbd212d121380ceef7acc Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 3 Jul 2009 00:39:38 +0900 Subject: Update Yoichi Yuasa's e-mail address Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- drivers/input/misc/cobalt_btns.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c index 2adf9cb265da..d114d3a9e1e9 100644 --- a/drivers/input/misc/cobalt_btns.c +++ b/drivers/input/misc/cobalt_btns.c @@ -1,7 +1,7 @@ /* * Cobalt button interface driver. * - * Copyright (C) 2007-2008 Yoichi Yuasa + * Copyright (C) 2007-2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -148,7 +148,7 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev) return 0; } -MODULE_AUTHOR("Yoichi Yuasa "); +MODULE_AUTHOR("Yoichi Yuasa "); MODULE_DESCRIPTION("Cobalt button interface driver"); MODULE_LICENSE("GPL"); /* work with hotplug and coldplug */ -- cgit v1.2.1 From ddaa43433dd77535e4e132787f199f58ce224f44 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 7 Jul 2009 22:10:02 -0700 Subject: Input: mark serio and i8042 as suspended when hibernating too Serio ports are not being restarted any longer because resume operations after hibernate do nothing, since the device has not been marked as suspended. This happens because suspend is only considering the SUSPEND event but not the FREEZE event. Note that this driver has still to migrate to dev_pm_ops, but this fixes this particular bug now. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 7 ++++--- drivers/input/serio/serio.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index f919bf57293c..582245c497eb 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -934,10 +934,11 @@ static bool i8042_suspended; static int i8042_suspend(struct platform_device *dev, pm_message_t state) { - if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) { + if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) i8042_controller_reset(); - i8042_suspended = true; - } + + i8042_suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index fb17573f8f2d..d66f4944f2a0 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -935,10 +935,11 @@ static int serio_suspend(struct device *dev, pm_message_t state) { struct serio *serio = to_serio_port(dev); - if (!serio->suspended && state.event == PM_EVENT_SUSPEND) { + if (!serio->suspended && state.event == PM_EVENT_SUSPEND) serio_cleanup(serio); - serio->suspended = true; - } + + serio->suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } -- cgit v1.2.1 From eeafa5ef6de5acf678624a21f7dba7d43ba73845 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Tue, 7 Jul 2009 22:11:52 -0700 Subject: Input: gpio_mouse - use standard driver registration method This patch is needed when the gpio's became available only at late stages, for example, when using i2c gpio expander. Signed-off-by: Saeed Bishara Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/gpio_mouse.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index 5e5eb88d8d1e..7b6ce178f1b6 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -46,7 +46,7 @@ static void gpio_mouse_scan(struct input_polled_dev *dev) input_sync(input); } -static int __init gpio_mouse_probe(struct platform_device *pdev) +static int __devinit gpio_mouse_probe(struct platform_device *pdev) { struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; struct input_polled_dev *input_poll; @@ -170,10 +170,8 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev) return 0; } -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:gpio_mouse"); - static struct platform_driver gpio_mouse_device_driver = { + .probe = gpio_mouse_probe, .remove = __devexit_p(gpio_mouse_remove), .driver = { .name = "gpio_mouse", @@ -183,8 +181,7 @@ static struct platform_driver gpio_mouse_device_driver = { static int __init gpio_mouse_init(void) { - return platform_driver_probe(&gpio_mouse_device_driver, - gpio_mouse_probe); + return platform_driver_register(&gpio_mouse_device_driver); } module_init(gpio_mouse_init); @@ -197,3 +194,5 @@ module_exit(gpio_mouse_exit); MODULE_AUTHOR("Hans-Christian Egtvedt "); MODULE_DESCRIPTION("GPIO mouse driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */ + -- cgit v1.2.1 From e705cee427e319665969ef7ac664f3612dec8899 Mon Sep 17 00:00:00 2001 From: Giuseppe Mazzotta Date: Sun, 12 Jul 2009 21:02:27 -0700 Subject: Input: wistron_btns - recognize Maxdata Pro 7000 notebooks This patch adds DMI information to automatically load the correct layout for the Maxdata Pro 7000X/DX notebook models. Such notebooks are clones of Fujitsu Amilo V2000, the hook for the v2000 is being used and I have tested that perfectly works. The immediate result of integrating this patch is that the five special buttons will work on these specific notebook models and that the RF killswitch will not be activated after suspend. This patch definitively obsoletes the fsam7400 module which I was still needing to enable wifi and to fix the RF killswitch suspend problem; in the current 2.6.30 kernel it is necessary to load the wistron_btns module with options 'force=1 keymap=1557/MS2141', which was not anyway a complete workaround. Signed-off-by: Giuseppe Mazzotta Signed-off-by: Dmitry Torokhov --- drivers/input/misc/wistron_btns.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 7c8957dd22c0..26e17a9a22eb 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -644,6 +644,15 @@ static struct dmi_system_id dmi_ids[] __initdata = { }, .driver_data = keymap_fs_amilo_pro_v2000 }, + { + .callback = dmi_matched, + .ident = "Maxdata Pro 7000 DX", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"), + }, + .driver_data = keymap_fs_amilo_pro_v2000 + }, { .callback = dmi_matched, .ident = "Fujitsu N3510", -- cgit v1.2.1 From 70a6f2e6d6b8653d394b63210ec57b4c78f3dcd8 Mon Sep 17 00:00:00 2001 From: Michael Gruber Date: Sun, 12 Jul 2009 20:51:36 -0700 Subject: Input: xpad - don't resend successfully sent outgoing requests This avoids an infinite loop. Signed-off-by: Michael Gruber Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index b868b8d5fbb3..f155ad8cdae7 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -470,20 +470,20 @@ static void xpad_irq_out(struct urb *urb) status = urb->status; switch (status) { - case 0: + case 0: /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); - return; - default: - dbg("%s - nonzero urb status received: %d", - __func__, status); - goto exit; + return; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __func__, status); + return; + + default: + dbg("%s - nonzero urb status received: %d", __func__, status); + goto exit; } exit: -- cgit v1.2.1 From 35db715bfd3805b04aa233b9933b9facfa9a3290 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Sun, 12 Jul 2009 20:51:32 -0700 Subject: Input: pcspkr - switch driver to dev_pm_ops Gets rid of the following warning: Platform driver 'pcspkr' needs updating - please use dev_pm_ops Signed-off-by: Frans Pop Signed-off-by: Dmitry Torokhov --- drivers/input/misc/pcspkr.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index d6a30cee7bc7..663bbc7ae2f5 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -113,7 +113,7 @@ static int __devexit pcspkr_remove(struct platform_device *dev) return 0; } -static int pcspkr_suspend(struct platform_device *dev, pm_message_t state) +static int pcspkr_suspend(struct device *dev) { pcspkr_event(NULL, EV_SND, SND_BELL, 0); @@ -126,14 +126,18 @@ static void pcspkr_shutdown(struct platform_device *dev) pcspkr_event(NULL, EV_SND, SND_BELL, 0); } +static struct dev_pm_ops pcspkr_pm_ops = { + .suspend = pcspkr_suspend, +}; + static struct platform_driver pcspkr_platform_driver = { .driver = { .name = "pcspkr", .owner = THIS_MODULE, + .pm = &pcspkr_pm_ops, }, .probe = pcspkr_probe, .remove = __devexit_p(pcspkr_remove), - .suspend = pcspkr_suspend, .shutdown = pcspkr_shutdown, }; -- cgit v1.2.1 From f0a14de2f82dd6aa13e04816da2091c7ed0f77cf Mon Sep 17 00:00:00 2001 From: Simon Davie Date: Sun, 12 Jul 2009 20:44:09 -0700 Subject: Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525 This patch enables forced releasing of the Fn+Volume hotkeys on the Fujitsu Siemens Amilo Pi 3525 notebook. Signed-off-by: Simon Davie Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index df3f8aa68115..809a7ddbe3af 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -894,6 +894,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { 0xb0, 0xae, -1U }; +/* + * Amilo Pi 3525 key release for Fn+Volume keys not working + */ +static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { + 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U +}; + /* * Amilo Xi 3650 key release for light touch bar not working */ @@ -1567,6 +1574,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_pa1510_forced_release_keys, }, + { + .ident = "Fujitsu Amilo Pi 3525", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_pi3525_forced_release_keys, + }, { .ident = "Fujitsu Amilo Xi 3650", .matches = { -- cgit v1.2.1 From f936601471d1454dacbd3b2a961fd4d883090aeb Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 13 Jul 2009 22:22:49 -0700 Subject: Input: fix EVIOCGNAME/JSIOCGNAME regression Commit 3d5cb60e ("Input: simplify name handling for certain input handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME ioctl. Before this, patch, the platform device's name was given back to userspace which was good to identify devices. After this patch, the device is ("event%d", minor) which is not descriptive at all. This fixes the behaviour by taking dev->name. Reported-by: Sven Neumann Signed-off-by: Daniel Mack Reviewed-by: Thadeu Lima de Souza Cascardo Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 3 +-- drivers/input/joydev.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 114efd8dc8f5..1148140d08a1 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -608,8 +608,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, p, compat_mode); if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0))) - return str_to_user(dev_name(&evdev->dev), - _IOC_SIZE(cmd), p); + return str_to_user(dev->name, _IOC_SIZE(cmd), p); if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0))) return str_to_user(dev->phys, _IOC_SIZE(cmd), p); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 0e12f89276a3..4cfd084fa897 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -536,7 +536,7 @@ static int joydev_ioctl_common(struct joydev *joydev, default: if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) { int len; - const char *name = dev_name(&dev->dev); + const char *name = dev->name; if (!name) return 0; -- cgit v1.2.1 From 032e46cbf5fb1d768d7dec5631c224e22b4be46f Mon Sep 17 00:00:00 2001 From: Jerone Young Date: Mon, 20 Jul 2009 22:14:59 -0700 Subject: Input: atkbd - add force relese key quirk for Soltech TA12 Netbooks based on the Soltech TA12 do not send a key release for volume keys causing Linux to think the key is constantly being pressed forever. Added quirk data for forced release keys. BugLink: https://bugs.launchpad.net//bugs/397499 Signed-off-by: Jerone Young Signed-off-by: Tim Gardner Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 809a7ddbe3af..95fe0452dae4 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -908,6 +908,13 @@ static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U }; +/* + * Soltech TA12 system with broken key release on volume keys and mute key + */ +static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { + 0xa0, 0xae, 0xb0, -1U +}; + /* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set @@ -1592,6 +1599,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_xi3650_forced_release_keys, }, + { + .ident = "Soltech Corporation TA12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkdb_soltech_ta12_forced_release_keys, + }, { } }; -- cgit v1.2.1