From d608c3d9ac818fc0addc884144c7550e03b0fc6f Mon Sep 17 00:00:00 2001 From: Weifeng Voon Date: Fri, 12 Aug 2016 17:02:49 +0300 Subject: i2c: designware: Enable fast mode plus This patch enabled fast mode plus. The fast mode plus and fast speed share the same HCNT and LCNT register. So, the fast mode plus will only run when the HCNT and LCNT value is provided. Else, it will run at fast speed as default. Signed-off-by: Weifeng Voon Signed-off-by: Jarkko Nikula Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 7 +++++-- drivers/i2c/busses/i2c-designware-platdrv.c | 9 ++++++--- 2 files changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index c6922b806fb7..07edff7a62e3 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -347,8 +347,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT); dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); - /* Set SCL timing parameters for fast-mode */ - if (dev->fs_hcnt && dev->fs_lcnt) { + /* Set SCL timing parameters for fast-mode or fast-mode plus */ + if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) { + hcnt = dev->fp_hcnt; + lcnt = dev->fp_lcnt; + } else if (dev->fs_hcnt && dev->fs_lcnt) { hcnt = dev->fs_hcnt; lcnt = dev->fs_lcnt; } else { diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index cbe4fb31cb4b..ea92e9f3fba1 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -196,10 +196,13 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) dw_i2c_acpi_configure(pdev); /* - * Only standard mode at 100kHz and fast mode at 400kHz are supported. + * Only standard mode at 100kHz, fast mode at 400kHz, + * and fast mode plus at 1MHz are supported. */ - if (dev->clk_freq != 100000 && dev->clk_freq != 400000) { - dev_err(&pdev->dev, "Only 100kHz and 400kHz supported"); + if (dev->clk_freq != 100000 && dev->clk_freq != 400000 + && dev->clk_freq != 1000000) { + dev_err(&pdev->dev, + "Only 100kHz, 400kHz and 1MHz are supported"); return -EINVAL; } -- cgit v1.2.1