From e1a8e913f97e36cc5a23a24a8b4717e84998f13c Mon Sep 17 00:00:00 2001 From: Kaiwan N Billimoria Date: Mon, 12 Jun 2006 22:00:05 +0200 Subject: [PATCH] lm70: New hardware monitoring driver This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/hwmon/Kconfig') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 43e1f082f7be..0e31a0c496e8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -204,6 +204,16 @@ config SENSORS_LM63 This driver can also be built as a module. If so, the module will be called lm63. +config SENSORS_LM70 + tristate "National Semiconductor LM70" + depends on HWMON && SPI_MASTER && EXPERIMENTAL + help + If you say yes here you get support for the National Semiconductor + LM70 digital temperature sensor chip. + + This driver can also be built as a module. If so, the module + will be called lm70. + config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on HWMON && I2C -- cgit v1.2.1