From 10a231026574f9ec9761b6435394b8830b485e4e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 27 Jun 2014 17:19:24 +0200 Subject: drm: Introduce drm_fb_helper_prepare() To implement hotplug detection in a race-free manner, drivers must call drm_kms_helper_poll_init() before hotplug events can be triggered. Such events can be triggered right after any of the encoders or connectors are initialized. At the same time, if the drm_fb_helper_hotplug_event() helper is used by a driver, then the poll helper requires some parts of the FB helper to be initialized to prevent a crash. At the same time, drm_fb_helper_init() requires information that is not necessarily available at such an early stage (number of CRTCs and connectors), so it cannot be used yet. Add a new helper, drm_fb_helper_prepare(), that initializes the bare minimum needed to allow drm_kms_helper_poll_init() to execute and any subsequent hotplug events to be processed properly. Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_fb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm/udl/udl_fb.c') diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c index 0647c8cc368b..d1da339843ca 100644 --- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -583,7 +583,8 @@ int udl_fbdev_init(struct drm_device *dev) return -ENOMEM; udl->fbdev = ufbdev; - ufbdev->helper.funcs = &udl_fb_helper_funcs; + + drm_fb_helper_prepare(dev, &ufbdev->helper, &udl_fb_helper_funcs); ret = drm_fb_helper_init(dev, &ufbdev->helper, 1, 1); -- cgit v1.2.1