From f8beab2bb611d735767871e0e1a12dc6a0def7b1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 28 Oct 2011 23:50:49 +0200 Subject: regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown --- drivers/base/regmap/Kconfig | 3 + drivers/base/regmap/Makefile | 1 + drivers/base/regmap/regmap-irq.c | 284 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 288 insertions(+) create mode 100644 drivers/base/regmap/regmap-irq.c (limited to 'drivers/base') diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig index 2fc6a66f39a4..0f6c7fb418e8 100644 --- a/drivers/base/regmap/Kconfig +++ b/drivers/base/regmap/Kconfig @@ -13,3 +13,6 @@ config REGMAP_I2C config REGMAP_SPI tristate + +config REGMAP_IRQ + bool diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile index 0573c8a9dacb..ce2d18a6465b 100644 --- a/drivers/base/regmap/Makefile +++ b/drivers/base/regmap/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_REGMAP) += regmap.o regcache.o regcache-indexed.o regcache-rbtree.o obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o +obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c new file mode 100644 index 000000000000..bd54f63be9ed --- /dev/null +++ b/drivers/base/regmap/regmap-irq.c @@ -0,0 +1,284 @@ +/* + * regmap based irq_chip + * + * Copyright 2011 Wolfson Microelectronics plc + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include "internal.h" + +struct regmap_irq_chip_data { + struct mutex lock; + + struct regmap *map; + struct regmap_irq_chip *chip; + + int irq_base; + + void *status_reg_buf; + unsigned int *status_buf; + unsigned int *mask_buf; + unsigned int *mask_buf_def; +}; + +static inline const +struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data, + int irq) +{ + return &data->chip->irqs[irq - data->irq_base]; +} + +static void regmap_irq_lock(struct irq_data *data) +{ + struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); + + mutex_lock(&d->lock); +} + +static void regmap_irq_sync_unlock(struct irq_data *data) +{ + struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); + int i, ret; + + /* + * If there's been a change in the mask write it back to the + * hardware. We rely on the use of the regmap core cache to + * suppress pointless writes. + */ + for (i = 0; i < d->chip->num_regs; i++) { + ret = regmap_update_bits(d->map, d->chip->mask_base + i, + d->mask_buf_def[i], d->mask_buf[i]); + if (ret != 0) + dev_err(d->map->dev, "Failed to sync masks in %x\n", + d->chip->mask_base + i); + } + + mutex_unlock(&d->lock); +} + +static void regmap_irq_enable(struct irq_data *data) +{ + struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); + const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->irq); + + d->mask_buf[irq_data->reg_offset] &= ~irq_data->mask; +} + +static void regmap_irq_disable(struct irq_data *data) +{ + struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); + const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->irq); + + d->mask_buf[irq_data->reg_offset] |= irq_data->mask; +} + +static struct irq_chip regmap_irq_chip = { + .name = "regmap", + .irq_bus_lock = regmap_irq_lock, + .irq_bus_sync_unlock = regmap_irq_sync_unlock, + .irq_disable = regmap_irq_disable, + .irq_enable = regmap_irq_enable, +}; + +static irqreturn_t regmap_irq_thread(int irq, void *d) +{ + struct regmap_irq_chip_data *data = d; + struct regmap_irq_chip *chip = data->chip; + struct regmap *map = data->map; + int ret, i; + u8 *buf8 = data->status_reg_buf; + u16 *buf16 = data->status_reg_buf; + u32 *buf32 = data->status_reg_buf; + + ret = regmap_bulk_read(map, chip->status_base, data->status_reg_buf, + chip->num_regs); + if (ret != 0) { + dev_err(map->dev, "Failed to read IRQ status: %d\n", ret); + return IRQ_NONE; + } + + /* + * Ignore masked IRQs and ack if we need to; we ack early so + * there is no race between handling and acknowleding the + * interrupt. We assume that typically few of the interrupts + * will fire simultaneously so don't worry about overhead from + * doing a write per register. + */ + for (i = 0; i < data->chip->num_regs; i++) { + switch (map->format.val_bytes) { + case 1: + data->status_buf[i] = buf8[i]; + break; + case 2: + data->status_buf[i] = buf16[i]; + break; + case 4: + data->status_buf[i] = buf32[i]; + break; + default: + BUG(); + return IRQ_NONE; + } + + data->status_buf[i] &= ~data->mask_buf[i]; + + if (data->status_buf[i] && chip->ack_base) { + ret = regmap_write(map, chip->ack_base + i, + data->status_buf[i]); + if (ret != 0) + dev_err(map->dev, "Failed to ack 0x%x: %d\n", + chip->ack_base + i, ret); + } + } + + for (i = 0; i < chip->num_irqs; i++) { + if (data->status_buf[chip->irqs[i].reg_offset] & + chip->irqs[i].mask) { + handle_nested_irq(data->irq_base + i); + } + } + + return IRQ_HANDLED; +} + +/** + * regmap_add_irq_chip(): Use standard regmap IRQ controller handling + * + * map: The regmap for the device. + * irq: The IRQ the device uses to signal interrupts + * irq_flags: The IRQF_ flags to use for the primary interrupt. + * chip: Configuration for the interrupt controller. + * data: Runtime data structure for the controller, allocated on success + * + * Returns 0 on success or an errno on failure. + * + * In order for this to be efficient the chip really should use a + * register cache. The chip driver is responsible for restoring the + * register values used by the IRQ controller over suspend and resume. + */ +int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, + int irq_base, struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data) +{ + struct regmap_irq_chip_data *d; + int cur_irq, i; + int ret = -ENOMEM; + + irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0); + if (irq_base < 0) { + dev_warn(map->dev, "Failed to allocate IRQs: %d\n", + irq_base); + return irq_base; + } + + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) + return -ENOMEM; + + d->status_buf = kzalloc(sizeof(unsigned int) * chip->num_regs, + GFP_KERNEL); + if (!d->status_buf) + goto err_alloc; + + d->status_reg_buf = kzalloc(map->format.val_bytes * chip->num_regs, + GFP_KERNEL); + if (!d->status_reg_buf) + goto err_alloc; + + d->mask_buf = kzalloc(sizeof(unsigned int) * chip->num_regs, + GFP_KERNEL); + if (!d->mask_buf) + goto err_alloc; + + d->mask_buf_def = kzalloc(sizeof(unsigned int) * chip->num_regs, + GFP_KERNEL); + if (!d->mask_buf_def) + goto err_alloc; + + d->map = map; + d->chip = chip; + d->irq_base = irq_base; + mutex_init(&d->lock); + + for (i = 0; i < chip->num_irqs; i++) + d->mask_buf_def[chip->irqs[i].reg_offset] + |= chip->irqs[i].mask; + + /* Mask all the interrupts by default */ + for (i = 0; i < chip->num_regs; i++) { + d->mask_buf[i] = d->mask_buf_def[i]; + ret = regmap_write(map, chip->mask_base + i, d->mask_buf[i]); + if (ret != 0) { + dev_err(map->dev, "Failed to set masks in 0x%x: %d\n", + chip->mask_base + i, ret); + goto err_alloc; + } + } + + /* Register them with genirq */ + for (cur_irq = irq_base; + cur_irq < chip->num_irqs + irq_base; + cur_irq++) { + irq_set_chip_data(cur_irq, d); + irq_set_chip_and_handler(cur_irq, ®map_irq_chip, + handle_edge_irq); + irq_set_nested_thread(cur_irq, 1); + + /* ARM needs us to explicitly flag the IRQ as valid + * and will set them noprobe when we do so. */ +#ifdef CONFIG_ARM + set_irq_flags(cur_irq, IRQF_VALID); +#else + irq_set_noprobe(cur_irq); +#endif + } + + ret = request_threaded_irq(irq, NULL, regmap_irq_thread, irq_flags, + chip->name, d); + if (ret != 0) { + dev_err(map->dev, "Failed to request IRQ %d: %d\n", irq, ret); + goto err_alloc; + } + + return 0; + +err_alloc: + kfree(d->mask_buf_def); + kfree(d->mask_buf); + kfree(d->status_reg_buf); + kfree(d->status_buf); + kfree(d); + return ret; +} +EXPORT_SYMBOL_GPL(regmap_add_irq_chip); + +/** + * regmap_del_irq_chip(): Stop interrupt handling for a regmap IRQ chip + * + * @irq: Primary IRQ for the device + * @d: regmap_irq_chip_data allocated by regmap_add_irq_chip() + */ +void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d) +{ + if (!d) + return; + + free_irq(irq, d); + kfree(d->mask_buf_def); + kfree(d->mask_buf); + kfree(d->status_reg_buf); + kfree(d->status_buf); + kfree(d); +} +EXPORT_SYMBOL_GPL(regmap_del_irq_chip); -- cgit v1.2.1 From d23511f9590870effa5ace575b59aac18c47175f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 28 Nov 2011 18:50:39 +0000 Subject: regmap: Report if we actually handled an interrupt in regmap-irq While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-irq.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/base') diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index bd54f63be9ed..6b8a74c3ed18 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -100,6 +100,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) u8 *buf8 = data->status_reg_buf; u16 *buf16 = data->status_reg_buf; u32 *buf32 = data->status_reg_buf; + bool handled = false; ret = regmap_bulk_read(map, chip->status_base, data->status_reg_buf, chip->num_regs); @@ -146,10 +147,14 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) if (data->status_buf[chip->irqs[i].reg_offset] & chip->irqs[i].mask) { handle_nested_irq(data->irq_base + i); + handled = true; } } - return IRQ_HANDLED; + if (handled) + return IRQ_HANDLED; + else + return IRQ_NONE; } /** -- cgit v1.2.1 From 209a600623cf13a8168b2f6b83643db7825abb9a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Dec 2011 16:10:15 +0000 Subject: regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-irq.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/base') diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index 6b8a74c3ed18..428836fc5835 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -287,3 +287,16 @@ void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d) kfree(d); } EXPORT_SYMBOL_GPL(regmap_del_irq_chip); + +/** + * regmap_irq_chip_get_base(): Retrieve interrupt base for a regmap IRQ chip + * + * Useful for drivers to request their own IRQs. + * + * @data: regmap_irq controller to operate on. + */ +int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data) +{ + return data->irq_base; +} +EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base); -- cgit v1.2.1