From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 46 ++++++++++++++++++++++------------------------ 1 file changed, 22 insertions(+), 24 deletions(-) (limited to 'drivers/ata/sata_sil.c') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 00f2465dcdce..4a25093b2dda 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -49,6 +49,8 @@ #define DRV_VERSION "2.0" enum { + SIL_MMIO_BAR = 5, + /* * host flags */ @@ -200,7 +202,7 @@ static const struct ata_port_operations sil_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, + .data_xfer = ata_data_xfer, .freeze = sil_freeze, .thaw = sil_thaw, .error_handler = ata_bmdma_error_handler, @@ -295,7 +297,8 @@ static void sil_post_set_mode (struct ata_port *ap) { struct ata_host *host = ap->host; struct ata_device *dev; - void __iomem *addr = host->mmio_base + sil_port[ap->port_no].xfer_mode; + void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; + void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; u32 tmp, dev_mode[2]; unsigned int i; @@ -318,9 +321,9 @@ static void sil_post_set_mode (struct ata_port *ap) readl(addr); /* flush */ } -static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) +static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) { - unsigned long offset = ap->ioaddr.scr_addr; + void __iomem *offset = ap->ioaddr.scr_addr; switch (sc_reg) { case SCR_STATUS: @@ -339,7 +342,7 @@ static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_re static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) { - void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); + void __iomem *mmio = sil_scr_addr(ap, sc_reg); if (mmio) return readl(mmio); return 0xffffffffU; @@ -347,7 +350,7 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); + void __iomem *mmio = sil_scr_addr(ap, sc_reg); if (mmio) writel(val, mmio); } @@ -442,7 +445,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) static irqreturn_t sil_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; - void __iomem *mmio_base = host->mmio_base; + void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; int handled = 0; int i; @@ -474,7 +477,7 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance) static void sil_freeze(struct ata_port *ap) { - void __iomem *mmio_base = ap->host->mmio_base; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; u32 tmp; /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ @@ -489,7 +492,7 @@ static void sil_freeze(struct ata_port *ap) static void sil_thaw(struct ata_port *ap) { - void __iomem *mmio_base = ap->host->mmio_base; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; u32 tmp; /* clear IRQ */ @@ -621,7 +624,6 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; struct device *dev = &pdev->dev; struct ata_probe_ent *probe_ent; - unsigned long base; void __iomem *mmio_base; int rc; unsigned int i; @@ -633,11 +635,11 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { + rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME); + if (rc == -EBUSY) pcim_pin_device(pdev); + if (rc) return rc; - } rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) @@ -662,20 +664,16 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->irq_flags = IRQF_SHARED; probe_ent->port_flags = sil_port_info[ent->driver_data].flags; - mmio_base = pcim_iomap(pdev, 5, 0); - if (mmio_base == NULL) - return -ENOMEM; - - probe_ent->mmio_base = mmio_base; + probe_ent->iomap = pcim_iomap_table(pdev); - base = (unsigned long) mmio_base; + mmio_base = probe_ent->iomap[SIL_MMIO_BAR]; for (i = 0; i < probe_ent->n_ports; i++) { - probe_ent->port[i].cmd_addr = base + sil_port[i].tf; + probe_ent->port[i].cmd_addr = mmio_base + sil_port[i].tf; probe_ent->port[i].altstatus_addr = - probe_ent->port[i].ctl_addr = base + sil_port[i].ctl; - probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma; - probe_ent->port[i].scr_addr = base + sil_port[i].scr; + probe_ent->port[i].ctl_addr = mmio_base + sil_port[i].ctl; + probe_ent->port[i].bmdma_addr = mmio_base + sil_port[i].bmdma; + probe_ent->port[i].scr_addr = mmio_base + sil_port[i].scr; ata_std_ports(&probe_ent->port[i]); } @@ -702,7 +700,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev) return rc; sil_init_controller(pdev, host->n_ports, host->ports[0]->flags, - host->mmio_base); + host->iomap[SIL_MMIO_BAR]); ata_host_resume(host); return 0; -- cgit v1.2.1