From 4ae46befb49d4173122e0afa995c4e93d01948a2 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 10:05:39 +0800 Subject: Thermal: Introduce thermal_zone_trip_update() This function is used to update the cooling state of all the cooling devices that are bound to an active trip point. This will be used for passive cooling as well, in the future patches. as both active and passive cooling can share the same algorithm, which is 1. if the temperature is higher than a trip point, a. if the trend is THERMAL_TREND_RAISING, use higher cooling state for this trip point b. if the trend is THERMAL_TREND_DROPPING, use lower cooling state for this trip point 2. if the temperature is lower than a trip point, use lower cooling state for this trip point. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/acpi/thermal.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 07cb2172bd09..bd66bd28a43f 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -716,9 +716,11 @@ static int thermal_get_trend(struct thermal_zone_device *thermal, if (thermal_get_trip_type(thermal, trip, &type)) return -EINVAL; - /* Only PASSIVE trip points need TREND */ - if (type != THERMAL_TRIP_PASSIVE) - return -EINVAL; + if (type == THERMAL_TRIP_ACTIVE) { + /* aggressive active cooling */ + *trend = THERMAL_TREND_RAISING; + return 0; + } /* * tz->temperature has already been updated by generic thermal layer, -- cgit v1.2.1