From e39d5ef678045d61812c1401f04fe8edb14d6359 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 9 Aug 2010 07:58:48 +0200 Subject: powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios The GPIO controller of MPC512x is slightly different from 8xxx GPIO controllers. The register interface is the same except the external interrupt control register. The MPC512x GPIO controller differentiates between four interrupt event types and therefore provides two interrupt control registers, GPICR1 and GPICR2. GPIO[0:15] interrupt event types are configured in GPICR1 register, GPIO[16:31] - in GPICR2 register. This patch adds MPC512x speciffic set_type() callback and updates config file and comments. Additionally the gpio chip registration function is changed to use for_each_matching_node() preventing multiple registration if a node claimes compatibility with another gpio controller type. Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/platforms/Kconfig | 7 ++-- arch/powerpc/sysdev/mpc8xxx_gpio.c | 75 ++++++++++++++++++++++++++++++++++---- 2 files changed, 71 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index d1663db7810f..471115a13d1b 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -304,13 +304,14 @@ config OF_RTC source "arch/powerpc/sysdev/bestcomm/Kconfig" config MPC8xxx_GPIO - bool "MPC8xxx GPIO support" - depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx + bool "MPC512x/MPC8xxx GPIO support" + depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ + FSL_SOC_BOOKE || PPC_86xx select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here if you're going to use hardware that connects to the - MPC831x/834x/837x/8572/8610 GPIOs. + MPC512x/831x/834x/837x/8572/8610 GPIOs. config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index 2b69084d0f0c..36499394a161 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -1,5 +1,5 @@ /* - * GPIOs on MPC8349/8572/8610 and compatible + * GPIOs on MPC512x/8349/8572/8610 and compatible * * Copyright (C) 2008 Peter Korsgaard * @@ -26,6 +26,7 @@ #define GPIO_IER 0x0c #define GPIO_IMR 0x10 #define GPIO_ICR 0x14 +#define GPIO_ICR2 0x18 struct mpc8xxx_gpio_chip { struct of_mm_gpio_chip mm_gc; @@ -37,6 +38,7 @@ struct mpc8xxx_gpio_chip { */ u32 data; struct irq_host *irq; + void *of_dev_id_data; }; static inline u32 mpc8xxx_gpio2mask(unsigned int gpio) @@ -215,6 +217,51 @@ static int mpc8xxx_irq_set_type(unsigned int virq, unsigned int flow_type) return 0; } +static int mpc512x_irq_set_type(unsigned int virq, unsigned int flow_type) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq); + struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; + unsigned long gpio = virq_to_hw(virq); + void __iomem *reg; + unsigned int shift; + unsigned long flags; + + if (gpio < 16) { + reg = mm->regs + GPIO_ICR; + shift = (15 - gpio) * 2; + } else { + reg = mm->regs + GPIO_ICR2; + shift = (15 - (gpio % 16)) * 2; + } + + switch (flow_type) { + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrsetbits_be32(reg, 3 << shift, 2 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrsetbits_be32(reg, 3 << shift, 1 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_BOTH: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrbits32(reg, 3 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + static struct irq_chip mpc8xxx_irq_chip = { .name = "mpc8xxx-gpio", .unmask = mpc8xxx_irq_unmask, @@ -226,6 +273,11 @@ static struct irq_chip mpc8xxx_irq_chip = { static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { + struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data; + + if (mpc8xxx_gc->of_dev_id_data) + mpc8xxx_irq_chip.set_type = mpc8xxx_gc->of_dev_id_data; + set_irq_chip_data(virq, h->host_data); set_irq_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq); set_irq_type(virq, IRQ_TYPE_NONE); @@ -253,11 +305,20 @@ static struct irq_host_ops mpc8xxx_gpio_irq_ops = { .xlate = mpc8xxx_gpio_irq_xlate, }; +static struct of_device_id mpc8xxx_gpio_ids[] __initdata = { + { .compatible = "fsl,mpc8349-gpio", }, + { .compatible = "fsl,mpc8572-gpio", }, + { .compatible = "fsl,mpc8610-gpio", }, + { .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, }, + {} +}; + static void __init mpc8xxx_add_controller(struct device_node *np) { struct mpc8xxx_gpio_chip *mpc8xxx_gc; struct of_mm_gpio_chip *mm_gc; struct gpio_chip *gc; + const struct of_device_id *id; unsigned hwirq; int ret; @@ -297,6 +358,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np) if (!mpc8xxx_gc->irq) goto skip_irq; + id = of_match_node(mpc8xxx_gpio_ids, np); + if (id) + mpc8xxx_gc->of_dev_id_data = id->data; + mpc8xxx_gc->irq->host_data = mpc8xxx_gc; /* ack and mask all irqs */ @@ -321,13 +386,7 @@ static int __init mpc8xxx_add_gpiochips(void) { struct device_node *np; - for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio") - mpc8xxx_add_controller(np); - - for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio") - mpc8xxx_add_controller(np); - - for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio") + for_each_matching_node(np, mpc8xxx_gpio_ids) mpc8xxx_add_controller(np); return 0; -- cgit v1.2.1 From b690c425fe07c725e7f1f7d40303588416cba67f Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 29 Oct 2010 13:25:24 -0700 Subject: SPARC/LEON: removed constant timer initialization as if HZ=100, now it reflects the value of HZ Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- arch/sparc/kernel/leon_kernel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 2d51527d810f..f01c42661ee5 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -114,7 +114,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) if (leon3_gptimer_regs && leon3_irqctrl_regs) { LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld, - (((1000000 / 100) - 1))); + (((1000000 / HZ) - 1))); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0); #ifdef CONFIG_SMP @@ -128,7 +128,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) } LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0); - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1))); + LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1))); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0); # endif -- cgit v1.2.1 From ce05a94efaf71d562eeefd30d6bbc2ab42b06bac Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:08:23 -0800 Subject: sparc64: Delete prom_puts() unused. Signed-off-by: David S. Miller --- arch/sparc/prom/console_64.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c index 10322dc2f557..de67fc73d91e 100644 --- a/arch/sparc/prom/console_64.c +++ b/arch/sparc/prom/console_64.c @@ -81,19 +81,3 @@ prom_putchar(char c) { prom_nbputchar(c); } - -void -prom_puts(const char *s, int len) -{ - unsigned long args[7]; - - args[0] = (unsigned long) "write"; - args[1] = 3; - args[2] = 1; - args[3] = (unsigned int) prom_stdout; - args[4] = (unsigned long) s; - args[5] = len; - args[6] = (unsigned long) -1; - - p1275_cmd_direct(args); -} -- cgit v1.2.1 From 17d70d6df0c4ea7a203b444001572a91ad9c2bef Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:11:15 -0800 Subject: sparc: Remove prom_pathtoinode() Unused. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_32.h | 1 - arch/sparc/include/asm/oplib_64.h | 1 - arch/sparc/prom/tree_32.c | 16 ---------------- arch/sparc/prom/tree_64.c | 18 ------------------ 4 files changed, 36 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index 51296a6f5005..b0f79beffc3b 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -238,7 +238,6 @@ extern int prom_node_has_property(phandle node, char *property); extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); -extern phandle prom_pathtoinode(char *path); extern phandle prom_inst2pkg(int); /* Dorking with Bus ranges... */ diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index c9cc078e3e31..9b01a4b8ae18 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -279,7 +279,6 @@ extern phandle prom_finddevice(const char *name); extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); -extern phandle prom_pathtoinode(const char *path); extern phandle prom_inst2pkg(int); extern int prom_service_exists(const char *service_name); extern void prom_sun4v_guest_soft_state(void); diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c index 63e08e149774..535e2e69ac1d 100644 --- a/arch/sparc/prom/tree_32.c +++ b/arch/sparc/prom/tree_32.c @@ -342,19 +342,3 @@ phandle prom_inst2pkg(int inst) if (node == -1) return 0; return node; } - -/* Return 'node' assigned to a particular prom 'path' - * FIXME: Should work for v0 as well - */ -phandle prom_pathtoinode(char *path) -{ - phandle node; - int inst; - - inst = prom_devopen (path); - if (inst == -1) return 0; - node = prom_inst2pkg (inst); - prom_devclose (inst); - if (node == -1) return 0; - return node; -} diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c index 691be68932f8..d93660048376 100644 --- a/arch/sparc/prom/tree_64.c +++ b/arch/sparc/prom/tree_64.c @@ -374,24 +374,6 @@ inline phandle prom_inst2pkg(int inst) return node; } -/* Return 'node' assigned to a particular prom 'path' - * FIXME: Should work for v0 as well - */ -phandle prom_pathtoinode(const char *path) -{ - phandle node; - int inst; - - inst = prom_devopen (path); - if (inst == 0) - return 0; - node = prom_inst2pkg(inst); - prom_devclose(inst); - if (node == -1) - return 0; - return node; -} - int prom_ihandle2path(int handle, char *buffer, int bufsize) { unsigned long args[7]; -- cgit v1.2.1 From b148246912bea92bde2a0cba125ca94f1f776b12 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:23:20 -0800 Subject: sparc: Kill prom devops_{32,64}.c Completely unused. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_32.h | 19 --------- arch/sparc/include/asm/oplib_64.h | 21 ---------- arch/sparc/prom/Makefile | 1 - arch/sparc/prom/devops_32.c | 87 --------------------------------------- arch/sparc/prom/devops_64.c | 67 ------------------------------ 5 files changed, 195 deletions(-) delete mode 100644 arch/sparc/prom/devops_32.c delete mode 100644 arch/sparc/prom/devops_64.c (limited to 'arch') diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index b0f79beffc3b..1d893fa6374c 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -60,25 +60,6 @@ extern char *prom_getbootargs(void); extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index 9b01a4b8ae18..8441d1aa31c8 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -67,27 +67,6 @@ extern void prom_init(void *cif_handler, void *cif_stack); /* Boot argument acquisition, returns the boot command line string. */ extern char *prom_getbootargs(void); -/* Device utilities. */ - -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(const char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile index 1b8c073adb44..816c0fa12dc0 100644 --- a/arch/sparc/prom/Makefile +++ b/arch/sparc/prom/Makefile @@ -6,7 +6,6 @@ ccflags := -Werror lib-y := bootstr_$(BITS).o lib-$(CONFIG_SPARC32) += devmap.o -lib-y += devops_$(BITS).o lib-y += init_$(BITS).o lib-$(CONFIG_SPARC32) += memory.o lib-y += misc_$(BITS).o diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c deleted file mode 100644 index 9c5d4687242a..000000000000 --- a/arch/sparc/prom/devops_32.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * devops.c: Device operations using the PROM. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#include -#include -#include - -#include -#include - -extern void restore_current(void); - -/* Open the device described by the string 'dstr'. Returns the handle - * to that device used for subsequent operations on that device. - * Returns -1 on failure. - */ -int -prom_devopen(char *dstr) -{ - int handle; - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - handle = (*(romvec->pv_v0devops.v0_devopen))(dstr); - if(handle == 0) handle = -1; - break; - case PROM_V2: - case PROM_V3: - handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr); - break; - default: - handle = -1; - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); - - return handle; -} - -/* Close the device described by device handle 'dhandle'. */ -int -prom_devclose(int dhandle) -{ - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - (*(romvec->pv_v0devops.v0_devclose))(dhandle); - break; - case PROM_V2: - case PROM_V3: - (*(romvec->pv_v2devops.v2_dev_close))(dhandle); - break; - default: - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); - return 0; -} - -/* Seek to specified location described by 'seekhi' and 'seeklo' - * for device 'dhandle'. - */ -void -prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo) -{ - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - (*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo); - break; - case PROM_V2: - case PROM_V3: - (*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo); - break; - default: - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); -} diff --git a/arch/sparc/prom/devops_64.c b/arch/sparc/prom/devops_64.c deleted file mode 100644 index a017119e7ef1..000000000000 --- a/arch/sparc/prom/devops_64.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * devops.c: Device operations using the PROM. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#include -#include -#include - -#include -#include - -/* Open the device described by the string 'dstr'. Returns the handle - * to that device used for subsequent operations on that device. - * Returns 0 on failure. - */ -int -prom_devopen(const char *dstr) -{ - unsigned long args[5]; - - args[0] = (unsigned long) "open"; - args[1] = 1; - args[2] = 1; - args[3] = (unsigned long) dstr; - args[4] = (unsigned long) -1; - - p1275_cmd_direct(args); - - return (int) args[4]; -} - -/* Close the device described by device handle 'dhandle'. */ -int -prom_devclose(int dhandle) -{ - unsigned long args[4]; - - args[0] = (unsigned long) "close"; - args[1] = 1; - args[2] = 0; - args[3] = (unsigned int) dhandle; - - p1275_cmd_direct(args); - - return 0; -} - -/* Seek to specified location described by 'seekhi' and 'seeklo' - * for device 'dhandle'. - */ -void -prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo) -{ - unsigned long args[7]; - - args[0] = (unsigned long) "seek"; - args[1] = 3; - args[2] = 1; - args[3] = (unsigned int) dhandle; - args[4] = seekhi; - args[5] = seeklo; - args[6] = (unsigned long) -1; - - p1275_cmd_direct(args); -} -- cgit v1.2.1 From f7b5f55ac1623dfde24ef5319ad77c1746645f3f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:24:16 -0800 Subject: sparc64: Unexport prom_service_exists(). Only used by functions in misc_64.c so make it private to that file. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_64.h | 1 - arch/sparc/prom/misc_64.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index 8441d1aa31c8..daf02d314279 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -259,7 +259,6 @@ extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); extern phandle prom_inst2pkg(int); -extern int prom_service_exists(const char *service_name); extern void prom_sun4v_guest_soft_state(void); extern int prom_ihandle2path(int handle, char *buffer, int bufsize); diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c index d24bc44e361e..b900fdf829a0 100644 --- a/arch/sparc/prom/misc_64.c +++ b/arch/sparc/prom/misc_64.c @@ -18,7 +18,7 @@ #include #include -int prom_service_exists(const char *service_name) +static int prom_service_exists(const char *service_name) { unsigned long args[5]; -- cgit v1.2.1 From c540ee70e49b573535c7ddfd0e9a0fc9d549c8b7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:50:19 -0800 Subject: sparc64: Delete prom_setcallback(). Unused. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_64.h | 8 -------- arch/sparc/prom/misc_64.c | 14 -------------- 2 files changed, 22 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index daf02d314279..56985e300471 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -88,14 +88,6 @@ extern void prom_halt(void) __attribute__ ((noreturn)); /* Halt and power-off the machine. */ extern void prom_halt_power_off(void) __attribute__ ((noreturn)); -/* Set the PROM 'sync' callback function to the passed function pointer. - * When the user gives the 'sync' command at the prom prompt while the - * kernel is still active, the prom will call this routine. - * - */ -typedef int (*callback_func_t)(long *cmd); -extern void prom_setcallback(callback_func_t func_ptr); - /* Acquire the IDPROM of the root node in the prom device tree. This * gets passed a buffer where you would like it stuffed. The return value * is the format type of this idprom or 0xff on error. diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c index b900fdf829a0..e4f31d4d3715 100644 --- a/arch/sparc/prom/misc_64.c +++ b/arch/sparc/prom/misc_64.c @@ -150,20 +150,6 @@ void prom_halt_power_off(void) prom_halt(); } -/* Set prom sync handler to call function 'funcp'. */ -void prom_setcallback(callback_func_t funcp) -{ - unsigned long args[5]; - if (!funcp) - return; - args[0] = (unsigned long) "set-callback"; - args[1] = 1; - args[2] = 1; - args[3] = (unsigned long) funcp; - args[4] = (unsigned long) -1; - p1275_cmd_direct(args); -} - /* Get the idprom and stuff it into buffer 'idbuf'. Returns the * format type. 'num_bytes' is the number of bytes that your idbuf * has space for. Returns 0xff on error. -- cgit v1.2.1 From 91921fef7c658b12de53376b312d071d757f7770 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 17 Nov 2010 10:22:56 -0800 Subject: sparc: Do not export prom_nb{get,put}char(). Never used outside of console_{32,64}.c Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_32.h | 6 ------ arch/sparc/include/asm/oplib_64.h | 6 ------ arch/sparc/prom/console_32.c | 6 ++---- arch/sparc/prom/console_64.c | 6 ++---- 4 files changed, 4 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index 1d893fa6374c..49fe4266f86a 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -104,12 +104,6 @@ extern int prom_getprev(void); /* Character operations to/from the console.... */ -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - /* Blocking get character from console. */ extern char prom_getchar(void); diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index 56985e300471..d541de4b6844 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -96,12 +96,6 @@ extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); /* Character operations to/from the console.... */ -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - /* Blocking get character from console. */ extern char prom_getchar(void); diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c index 5340264b78f5..2ce5acb45f2d 100644 --- a/arch/sparc/prom/console_32.c +++ b/arch/sparc/prom/console_32.c @@ -19,8 +19,7 @@ extern void restore_current(void); /* Non blocking get character from console input device, returns -1 * if no input was taken. This can be used for polling. */ -int -prom_nbgetchar(void) +static int prom_nbgetchar(void) { static char inc; int i = -1; @@ -51,8 +50,7 @@ prom_nbgetchar(void) /* Non blocking put character to console device, returns -1 if * unsuccessful. */ -int -prom_nbputchar(char c) +static int prom_nbputchar(char c) { static char outc; unsigned long flags; diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c index de67fc73d91e..33a8b275d6af 100644 --- a/arch/sparc/prom/console_64.c +++ b/arch/sparc/prom/console_64.c @@ -18,8 +18,7 @@ extern int prom_stdin, prom_stdout; /* Non blocking get character from console input device, returns -1 * if no input was taken. This can be used for polling. */ -inline int -prom_nbgetchar(void) +static int prom_nbgetchar(void) { unsigned long args[7]; char inc; @@ -42,8 +41,7 @@ prom_nbgetchar(void) /* Non blocking put character to console device, returns -1 if * unsuccessful. */ -inline int -prom_nbputchar(char c) +static int prom_nbputchar(char c) { unsigned long args[7]; char outc; -- cgit v1.2.1 From c2d0879112825cddddd6c4f9b2645ff32acd6dc5 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 22 Nov 2010 16:31:35 -0800 Subject: xen: clean up "extra" memory handling some more Make sure that extra_pages is added for all E820_RAM regions beyond mem_end - completely excluded regions as well as the remains of partially included regions. Also makes sure the extra region is not unnecessarily high, and simplifies the logic to decide which regions should be added. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/setup.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38fdffaa71d3..b85dceef56f7 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -182,24 +182,21 @@ char * __init xen_memory_setup(void) for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end = map[i].addr + map[i].size; - if (map[i].type == E820_RAM) { - if (map[i].addr < mem_end && end > mem_end) { - /* Truncate region to max_mem. */ - u64 delta = end - mem_end; + if (map[i].type == E820_RAM && end > mem_end) { + /* RAM off the end - may be partially included */ + u64 delta = min(map[i].size, end - mem_end); - map[i].size -= delta; - extra_pages += PFN_DOWN(delta); + map[i].size -= delta; + end -= delta; - end = mem_end; - } + extra_pages += PFN_DOWN(delta); } - if (end > xen_extra_mem_start) + if (map[i].size > 0 && end > xen_extra_mem_start) xen_extra_mem_start = end; - /* If region is non-RAM or below mem_end, add what remains */ - if ((map[i].type != E820_RAM || map[i].addr < mem_end) && - map[i].size > 0) + /* Add region if any remains */ + if (map[i].size > 0) e820_add_region(map[i].addr, map[i].size, map[i].type); } -- cgit v1.2.1 From bc15fde77fc5d9ec2eec6066a5ab554ea1266a0a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 22 Nov 2010 17:17:50 -0800 Subject: xen: use default_idle We just need the idle loop to drop into safe_halt, which default_idle() is perfectly capable of doing. There's no need to duplicate it. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/setup.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index b85dceef56f7..95fb68a8c20d 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -250,20 +250,6 @@ char * __init xen_memory_setup(void) return "Xen"; } -static void xen_idle(void) -{ - local_irq_disable(); - - if (need_resched()) - local_irq_enable(); - else { - current_thread_info()->status &= ~TS_POLLING; - smp_mb__after_clear_bit(); - safe_halt(); - current_thread_info()->status |= TS_POLLING; - } -} - /* * Set the bit indicating "nosegneg" library variants should be used. * We only need to bother in pure 32-bit mode; compat 32-bit processes @@ -360,7 +346,11 @@ void __init xen_arch_setup(void) MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ? COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE); - pm_idle = xen_idle; + /* Set up idle, making sure it calls safe_halt() pvop */ +#ifdef CONFIG_X86_32 + boot_cpu_data.hlt_works_ok = 1; +#endif + pm_idle = default_idle; fiddle_vdso(); } -- cgit v1.2.1 From f910043ce00791c06afc3789278447c4e88670ea Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Nov 2010 11:09:03 -0800 Subject: OMAP: UART: don't resume UARTs that are not enabled. Add additional check to omap_uart_resume_idle() so that only enabled (specifically, idle-enabled) UARTs are allowed to resume. This matches the existing check in prepare idle. Without this patch, the system will hang if a board is configured to register only some uarts instead of all of them and PM is enabled. Cc: Govindraj R. Signed-off-by: Kevin Hilman [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index becf0e38ef7e..bc934dbe3bf0 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -406,7 +406,7 @@ void omap_uart_resume_idle(int num) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (num == uart->num) { + if (num == uart->num && uart->can_sleep) { omap_uart_enable_clocks(uart); /* Check for IO pad wakeup */ -- cgit v1.2.1 From 0d8e2d0dad98a693bad88aea6876ac8b94ad95c6 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 24 Nov 2010 16:49:05 -0700 Subject: OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled The console semaphore must be held while the OMAP UART devices are disabled, lest a console write cause an ARM abort (and a kernel crash) when the underlying console device is inaccessible. These crashes only occur when the console is on one of the OMAP internal serial ports. While this problem has been latent in the PM idle loop for some time, the crash was not triggerable with an unmodified kernel until commit 6f251e9db1093c187addc309b5f2f7fe3efd2995 ("OMAP: UART: omap_device conversions, remove implicit 8520 assumptions"). After this patch, a console write often occurs after the console UART has been disabled in the idle loop, crashing the system. Several users have encountered this bug: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg38396.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36602.html The same commit also introduced new code that disabled the UARTs during init, in omap_serial_init_port(). The kernel will also crash in this code when earlyconsole and extra debugging is enabled: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36411.html The minimal fix for the -rc series is to hold the console semaphore while the OMAP UARTs are disabled. This is a somewhat overbroad fix, since the console may not be located on an OMAP UART, as is the case with the GPMC UART on Zoom3. While it is technically possible to determine which devices the console or earlyconsole is actually running on, it is not a trivial problem to solve, and the code to do so is not really appropriate for the -rc series. The right long-term fix is to ensure that no code outside of the OMAP serial driver can disable an OMAP UART. As I understand it, code to implement this is under development by TI. This patch is a collaboration between Paul Walmsley and Tony Lindgren . Thanks to Ming Lei and Pramod for their feedback on earlier versions of this patch. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Acked-by: Kevin Hilman Cc: Ming Lei Cc: Pramod Cc: Thomas Petazzoni Cc: Jean Pihet Cc: Govindraj.R --- arch/arm/mach-omap2/pm24xx.c | 7 +++++++ arch/arm/mach-omap2/pm34xx.c | 10 ++++++++++ arch/arm/mach-omap2/serial.c | 5 +++++ 3 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index a40457d81927..c85923e56b85 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void) if (omap_irq_pending()) goto no_sleep; + /* Block console output in case it is on one of the OMAP UARTs */ + if (try_acquire_console_sem()) + goto no_sleep; + omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); omap_uart_prepare_idle(2); @@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(1); omap_uart_resume_idle(0); + release_console_sem(); + no_sleep: if (omap2_pm_debug) { unsigned long long tmp; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 75c0cd13ad8e..0ec8a04b7473 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -385,6 +386,12 @@ void omap_sram_idle(void) omap3_enable_io_chain(); } + /* Block console output in case it is on one of the OMAP UARTs */ + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) + if (try_acquire_console_sem()) + goto console_still_active; + /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); @@ -463,6 +470,9 @@ void omap_sram_idle(void) omap_uart_resume_idle(3); } + release_console_sem(); + +console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index bc934dbe3bf0..d17960a1be25 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,6 +27,7 @@ #include #include #include +#include #ifdef CONFIG_SERIAL_OMAP #include @@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port) oh->dev_attr = uart; + acquire_console_sem(); /* in case the earlycon is on the UART */ + /* * Because of early UART probing, UART did not get idled * on init. Now that omap_device is ready, ensure full idle @@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; + release_console_sem(); + if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { device_init_wakeup(&od->pdev.dev, true); -- cgit v1.2.1 From e7a3481c0246c8e45e79c629efd63b168e91fcda Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 25 Oct 2010 16:53:46 -0700 Subject: x86/pvclock: Zero last_value on resume If the guest domain has been suspend/resumed or migrated, then the system clock backing the pvclock clocksource may revert to a smaller value (ie, can be non-monotonic across the migration/save-restore). Make sure we zero last_value in that case so that the domain continues to see clock updates. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pvclock.h | 1 + arch/x86/kernel/pvclock.c | 5 +++++ arch/x86/xen/time.c | 2 ++ 3 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index 7f7e577a0e39..31d84acc1512 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -11,6 +11,7 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src); void pvclock_read_wallclock(struct pvclock_wall_clock *wall, struct pvclock_vcpu_time_info *vcpu, struct timespec *ts); +void pvclock_resume(void); /* * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 008b91eefa18..42eb3300dfc6 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -83,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src) static atomic64_t last_value = ATOMIC64_INIT(0); +void pvclock_resume(void) +{ + atomic64_set(&last_value, 0); +} + cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) { struct pvclock_shadow_time shadow; diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index b2bb5aa3b054..5da5e53fb94c 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -426,6 +426,8 @@ void xen_timer_resume(void) { int cpu; + pvclock_resume(); + if (xen_clockevent != &xen_vcpuop_clockevent) return; -- cgit v1.2.1 From 4bd5d259e451d35380de2fcd1a3510ae22d000a3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 26 Nov 2010 09:40:22 +0000 Subject: sh: Add div6_reparent_clks to clock framework for FSI Current clk_ops doesn't support .init which is used to select external clock on ecovec without CONFIG_SH_CLK_CPG_LEGACY. To solve this problem, this patch add div6_reparent_clks to clock-sh7724. This patch solve compile error too. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 34 ++++---------------------- arch/sh/include/cpu-sh4/cpu/sh7724.h | 3 +++ arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 44 ++++++++++++++++++++++++++++++---- 3 files changed, 46 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 2eaeb9e59585..f48c492a68d3 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -720,32 +720,6 @@ static struct platform_device camera_devices[] = { }; /* FSI */ -/* - * FSI-B use external clock which came from da7210. - * So, we should change parent of fsi - */ -#define FCLKBCR 0xa415000c -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimckb_clk = { - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKBCR, - .rate = 0, /* unknown */ -}; - static struct sh_fsi_platform_info fsi_info = { .portb_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | @@ -1264,10 +1238,10 @@ static int __init arch_setup(void) /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); if (!IS_ERR(clk)) { - clk_register(&fsimckb_clk); - clk_set_parent(clk, &fsimckb_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimckb_clk, 11000); + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimckb_clk, 48000); + clk_set_parent(clk, &sh7724_fsimckb_clk); + clk_set_rate(clk, 48000); clk_put(clk); } diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index 4c27b68789b3..7eb435999426 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -303,4 +303,7 @@ enum { SHDMA_SLAVE_SDHI1_RX, }; +extern struct clk sh7724_fsimcka_clk; +extern struct clk sh7724_fsimckb_clk; + #endif /* __ASM_SH7724_H__ */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 0fe2e9329cb2..271c0b325a9a 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -111,12 +111,21 @@ static struct clk div3_clk = { .parent = &pll_clk, }; +/* External input clock (pin name: FSIMCKA/FSIMCKB ) */ +struct clk sh7724_fsimcka_clk = { +}; + +struct clk sh7724_fsimckb_clk = { +}; + static struct clk *main_clks[] = { &r_clk, &extal_clk, &fll_clk, &pll_clk, &div3_clk, + &sh7724_fsimcka_clk, + &sh7724_fsimckb_clk, }; static void div4_kick(struct clk *clk) @@ -154,16 +163,38 @@ struct clk div4_clks[DIV4_NR] = { [DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT), }; -enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR }; +enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR }; static struct clk div6_clks[DIV6_NR] = { [DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0), - [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0), - [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0), [DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0), [DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT), }; +enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR }; + +/* Indices are important - they are the actual src selecting values */ +static struct clk *fclkacr_parent[] = { + [0] = &div3_clk, + [1] = NULL, + [2] = &sh7724_fsimcka_clk, + [3] = NULL, +}; + +static struct clk *fclkbcr_parent[] = { + [0] = &div3_clk, + [1] = NULL, + [2] = &sh7724_fsimckb_clk, + [3] = NULL, +}; + +static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { + [DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0, + fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2), + [DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0, + fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2), +}; + static struct clk mstp_clks[HWBLK_NR] = { SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT), SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT), @@ -240,8 +271,8 @@ static struct clk_lookup lookups[] = { /* DIV6 clocks */ CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]), - CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]), - CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]), + CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]), + CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]), CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]), @@ -375,6 +406,9 @@ int __init arch_clk_init(void) if (!ret) ret = sh_clk_div6_register(div6_clks, DIV6_NR); + if (!ret) + ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR); + if (!ret) ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR); -- cgit v1.2.1 From 193006f7e3b1abd42d7a3677b54fa2996461a842 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 26 Nov 2010 17:06:28 +0000 Subject: sh: boards: mach-se: use IS_ERR() instead of NULL check clk_get() returns ERR_PTR() on error, not NULL. Signed-off-by: Vasiliy Kulikov Reviewed-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c31d228fdfc6..673530500e27 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -871,14 +871,14 @@ static int __init devices_setup(void) /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 83333333)); clk_put(clk); } /* change parent of FSI A */ clk = clk_get(NULL, "fsia_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_register(&fsimcka_clk); clk_set_parent(clk, &fsimcka_clk); clk_set_rate(clk, 11000); -- cgit v1.2.1 From 44266416f786514ec43a0d15ad951c34566b99c9 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 29 Nov 2010 18:46:22 +0300 Subject: ARM: cns3xxx: Fix build with CONFIG_PCI=y commit 6338a6aa7c082f11d55712251e14178c68bf5869 ("ARM: 6269/1: Add 'code' parameter for hook_fault_code()") breaks CNS3xxx build: CC arch/arm/mach-cns3xxx/pcie.o pcie.c: In function 'cns3xxx_pcie_init': pcie.c:373: warning: passing argument 4 of 'hook_fault_code' makes integer from pointer without a cast pcie.c:373: error: too few arguments to function 'hook_fault_code' This commit fixes the small issue. Cc: stable@kernel.org [36] Signed-off-by: Anton Vorontsov --- arch/arm/mach-cns3xxx/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 38088c36936c..78defd71a829 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void) { int i; - hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, + hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0, "imprecise external abort"); for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { -- cgit v1.2.1 From 31e323cca9d5c8afd372976c35a5d46192f540d1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 29 Nov 2010 14:16:53 -0800 Subject: xen: don't bother to stop other cpus on shutdown/reboot Xen will shoot all the VCPUs when we do a shutdown hypercall, so there's no need to do it manually. In any case it will fail because all the IPI irqs have been pulled down by this point, so the cross-CPU calls will simply hang forever. Until change 76fac077db6b34e2c6383a7b4f3f4f7b7d06d8ce the function calls were not synchronously waited for, so this wasn't apparent. However after that change the calls became synchronous leading to a hang on shutdown on multi-VCPU guests. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: Alok Kataria --- arch/x86/xen/enlighten.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 235c0f4d3861..4a5973abefc8 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1016,10 +1016,6 @@ static void xen_reboot(int reason) { struct sched_shutdown r = { .reason = reason }; -#ifdef CONFIG_SMP - stop_other_cpus(); -#endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } -- cgit v1.2.1 From 805e3f495057aa5307ad4e3d6dc7073d4733c691 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 3 Nov 2010 15:32:21 +0000 Subject: xen: x86/32: perform initial startup on initial_page_table Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by: Ian Campbell Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Jeremy Fitzhardinge Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/enlighten.c | 2 -- arch/x86/xen/mmu.c | 69 +++++++++++++++++++++++++++++++++++++++--------- 2 files changed, 56 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4a5973abefc8..0db7303bccb6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1187,8 +1187,6 @@ asmlinkage void __init xen_start_kernel(void) /* Allocate and initialize top and mid mfn levels for p2m structure */ xen_build_mfn_list_list(); - init_mm.pgd = pgd; - /* keep using Xen gdt for now; no urgent need to change it */ #ifdef CONFIG_X86_32 diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 21ed8d7f75a5..c9cf23e17440 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2119,44 +2119,83 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, return pgd; } #else /* !CONFIG_X86_64 */ -static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD); +static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD); +static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD); + +static __init void xen_write_cr3_init(unsigned long cr3) +{ + unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir)); + + BUG_ON(read_cr3() != __pa(initial_page_table)); + BUG_ON(cr3 != __pa(swapper_pg_dir)); + + /* + * We are switching to swapper_pg_dir for the first time (from + * initial_page_table) and therefore need to mark that page + * read-only and then pin it. + * + * Xen disallows sharing of kernel PMDs for PAE + * guests. Therefore we must copy the kernel PMD from + * initial_page_table into a new kernel PMD to be used in + * swapper_pg_dir. + */ + swapper_kernel_pmd = + extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); + memcpy(swapper_kernel_pmd, initial_kernel_pmd, + sizeof(pmd_t) * PTRS_PER_PMD); + swapper_pg_dir[KERNEL_PGD_BOUNDARY] = + __pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT); + set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO); + + set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO); + xen_write_cr3(cr3); + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn); + + pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, + PFN_DOWN(__pa(initial_page_table))); + set_page_prot(initial_page_table, PAGE_KERNEL); + set_page_prot(initial_kernel_pmd, PAGE_KERNEL); + + pv_mmu_ops.write_cr3 = &xen_write_cr3; +} __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) { pmd_t *kernel_pmd; - level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); + initial_kernel_pmd = + extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) + xen_start_info->nr_pt_frames * PAGE_SIZE + 512*1024); kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd); - memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD); + memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD); - xen_map_identity_early(level2_kernel_pgt, max_pfn); + xen_map_identity_early(initial_kernel_pmd, max_pfn); - memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD); - set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY], - __pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT)); + memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD); + initial_page_table[KERNEL_PGD_BOUNDARY] = + __pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT); - set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO); - set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO); + set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO); + set_page_prot(initial_page_table, PAGE_KERNEL_RO); set_page_prot(empty_zero_page, PAGE_KERNEL_RO); pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd))); - xen_write_cr3(__pa(swapper_pg_dir)); - - pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir))); + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, + PFN_DOWN(__pa(initial_page_table))); + xen_write_cr3(__pa(initial_page_table)); memblock_x86_reserve_range(__pa(xen_start_info->pt_base), __pa(xen_start_info->pt_base + xen_start_info->nr_pt_frames * PAGE_SIZE), "XEN PAGETABLES"); - return swapper_pg_dir; + return initial_page_table; } #endif /* CONFIG_X86_64 */ @@ -2290,7 +2329,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .write_cr2 = xen_write_cr2, .read_cr3 = xen_read_cr3, +#ifdef CONFIG_X86_32 + .write_cr3 = xen_write_cr3_init, +#else .write_cr3 = xen_write_cr3, +#endif .flush_tlb_user = xen_flush_tlb, .flush_tlb_kernel = xen_flush_tlb, -- cgit v1.2.1 From 67bace72ee64f6a11cfb914b91d9d6bd47e80ed8 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 29 Nov 2010 20:34:38 -0500 Subject: parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn Noticed-by: Randy Dunlap Signed-off-by: Kyle McMartin --- arch/parisc/kernel/signal.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 35c827e94e31..609a331878e7 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -98,7 +98,6 @@ void sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) { struct rt_sigframe __user *frame; - struct siginfo si; sigset_t set; unsigned long usp = (regs->gr[30] & ~(0x01UL)); unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE; @@ -178,13 +177,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) give_sigsegv: DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n"); - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = task_pid_vnr(current); - si.si_uid = current_uid(); - si.si_addr = &frame->uc; - force_sig_info(SIGSEGV, &si, current); + force_sig(SIGSEGV, current); return; } -- cgit v1.2.1 From 4249f8acf993046948dc1f2e74244fe484c8cb8f Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Sun, 28 Nov 2010 20:30:19 +0200 Subject: ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST Enable compilation of platform devices and initialization code used in SMDK2416 board file. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2416/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 87b9c9f003bd..27b3e7c9d613 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -35,9 +35,12 @@ menu "S3C2416 Machines" config MACH_SMDK2416 bool "SMDK2416" select CPU_S3C2416 + select MACH_SMDK select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST select S3C2416_PM if PM help Say Y here if you are using an SMDK2416 -- cgit v1.2.1 From 71f608ef56c987c5325c3aaf9c3fadd4ddc77f64 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Sun, 28 Nov 2010 20:30:23 +0200 Subject: ARM: S3C2443: Select properly ARM core type Select ARM920T core when compiling kernel for s3c2443. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 4fef723126fa..31babec90cec 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -5,6 +5,7 @@ config CPU_S3C2443 bool depends on ARCH_S3C2410 + select CPU_ARM920T select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC -- cgit v1.2.1 From 4acf89fb3bbb01ba9de4a7cc102e46095a12c94e Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Sun, 28 Nov 2010 20:30:27 +0200 Subject: ARM: S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definition Dependency on (CPU_S3C2416 is not selected) was defined as "!CPU_2416", instead of "!CPU_S3C2416". Fix it. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index cef6a65637bd..fa2e5bffbb8e 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 -- cgit v1.2.1 From b94ca0792d49f5856570ba66f53acd69cd0917fc Mon Sep 17 00:00:00 2001 From: Eric Benard Date: Fri, 15 Oct 2010 11:27:17 +0200 Subject: at91: merge all at91rm9200 defconfig in one single file About all options present in each file are activated in the single file. Signed-off-by: Eric Benard Tested-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/configs/at91rm9200_defconfig | 341 ++++++++++++++++++++++++++++++++ arch/arm/configs/at91rm9200dk_defconfig | 72 ------- arch/arm/configs/at91rm9200ek_defconfig | 73 ------- arch/arm/configs/ateb9200_defconfig | 131 ------------ arch/arm/configs/carmeva_defconfig | 47 ----- arch/arm/configs/cpuat91_defconfig | 112 ----------- arch/arm/configs/csb337_defconfig | 104 ---------- arch/arm/configs/csb637_defconfig | 98 --------- arch/arm/configs/ecbat91_defconfig | 99 ---------- arch/arm/configs/kafa_defconfig | 61 ------ arch/arm/configs/kb9202_defconfig | 127 ------------ arch/arm/configs/onearm_defconfig | 80 -------- arch/arm/configs/picotux200_defconfig | 242 ----------------------- arch/arm/configs/yl9200_defconfig | 137 ------------- 14 files changed, 341 insertions(+), 1383 deletions(-) create mode 100644 arch/arm/configs/at91rm9200_defconfig delete mode 100644 arch/arm/configs/at91rm9200dk_defconfig delete mode 100644 arch/arm/configs/at91rm9200ek_defconfig delete mode 100644 arch/arm/configs/ateb9200_defconfig delete mode 100644 arch/arm/configs/carmeva_defconfig delete mode 100644 arch/arm/configs/cpuat91_defconfig delete mode 100644 arch/arm/configs/csb337_defconfig delete mode 100644 arch/arm/configs/csb637_defconfig delete mode 100644 arch/arm/configs/ecbat91_defconfig delete mode 100644 arch/arm/configs/kafa_defconfig delete mode 100644 arch/arm/configs/kb9202_defconfig delete mode 100644 arch/arm/configs/onearm_defconfig delete mode 100644 arch/arm/configs/picotux200_defconfig delete mode 100644 arch/arm/configs/yl9200_defconfig (limited to 'arch') diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig new file mode 100644 index 000000000000..38cb7c985426 --- /dev/null +++ b/arch/arm/configs/at91rm9200_defconfig @@ -0,0 +1,341 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_MACH_ONEARM=y +CONFIG_ARCH_AT91RM9200DK=y +CONFIG_MACH_AT91RM9200EK=y +CONFIG_MACH_CSB337=y +CONFIG_MACH_CSB637=y +CONFIG_MACH_CARMEVA=y +CONFIG_MACH_ATEB9200=y +CONFIG_MACH_KB9200=y +CONFIG_MACH_PICOTUX2XX=y +CONFIG_MACH_KAFA=y +CONFIG_MACH_ECBAT91=y +CONFIG_MACH_YL9200=y +CONFIG_MACH_CPUAT91=y +CONFIG_MACH_ECO920=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 +# CONFIG_ARM_THUMB is not set +CONFIG_PCCARD=y +CONFIG_AT91_CF=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x10000000 +CONFIG_ZBOOT_ROM_BSS=0x20040000 +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_EEPROM_LEGACY=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_TUN=m +CONFIG_PHYLIB=y +CONFIG_DAVICOM_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=32 +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_BITBANG=y +CONFIG_GPIO_SYSFS=y +CONFIG_HWMON=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91RM9200_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_S1D13XXX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_DISPLAY_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_MCT_U232=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_REISERFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_SMB_FS=m +CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig deleted file mode 100644 index 4438e64f3bfb..000000000000 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_ECO920=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig deleted file mode 100644 index ccd517c64bc7..000000000000 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_AT91RM9200EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_S1D13XXX=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig deleted file mode 100644 index 1b0e9a1689bb..000000000000 --- a/arch/arm/configs/ateb9200_defconfig +++ /dev/null @@ -1,131 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_ATEB9200=y -CONFIG_PCCARD=m -CONFIG_AT91_CF=m -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_TUN=m -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_GADGET=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRC16=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig deleted file mode 100644 index ac64dbd8a49c..000000000000 --- a/arch/arm/configs/carmeva_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_HOTPLUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_CARMEVA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_DNOTIFY is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig deleted file mode 100644 index 022aeb55b676..000000000000 --- a/arch/arm/configs/cpuat91_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CPUAT91=y -CONFIG_AT91_TIMER_HZ=100 -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig deleted file mode 100644 index a24c448840c4..000000000000 --- a/arch/arm/configs/csb337_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB337=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc1" -# CONFIG_RTC_INTF_SYSFS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig deleted file mode 100644 index 98552adac5fb..000000000000 --- a/arch/arm/configs/csb637_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB637=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig deleted file mode 100644 index 6bb6abdcea8c..000000000000 --- a/arch/arm/configs/ecbat91_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ECBAT91=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_MAC80211=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig deleted file mode 100644 index 896dbe00dc6e..000000000000 --- a/arch/arm/configs/kafa_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KAFA=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig deleted file mode 100644 index 9f906a85f5c2..000000000000 --- a/arch/arm/configs/kb9202_defconfig +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KB9200=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x10000000 -CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig deleted file mode 100644 index 1579857aeeaa..000000000000 --- a/arch/arm/configs/onearm_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ONEARM=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig deleted file mode 100644 index 4c9afa478d57..000000000000 --- a/arch/arm/configs/picotux200_defconfig +++ /dev/null @@ -1,242 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_PICOTUX2XX=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=m -CONFIG_HID=m -CONFIG_USB=m -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_MMC=m -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=m -CONFIG_RTC_DRV_AT91RM9200=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_AMIGA_PARTITION=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig deleted file mode 100644 index 30c537f61089..000000000000 --- a/arch/arm/configs/yl9200_defconfig +++ /dev/null @@ -1,137 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_YL9200=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=3 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SLUB_DEBUG_ON=y -CONFIG_DEBUG_KOBJECT=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -- cgit v1.2.1 From 1db550118c46d96f371de5b3d0bd51edb148bd54 Mon Sep 17 00:00:00 2001 From: Jason Chagas Date: Mon, 15 Nov 2010 09:50:12 +0800 Subject: ARM: mmp2: remove not used clk_rtc RTC clock will remain at 32KHz and powered on, there is no need for it at this moment. Signed-off-by: Jason Chagas Signed-off-by: Eric Miao --- arch/arm/mach-mmp/mmp2.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index daf3993349f8..2e3dd08ccc3f 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); -static APBC_CLK(rtc, MMP2_RTC, 0, 32768); static APMU_CLK(nand, NAND, 0xbf, 100000000); -- cgit v1.2.1 From 9f1ee150fc7039eb65039ab17d9a95dfa6250133 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 6 Nov 2010 23:34:03 +0100 Subject: ARM: pxa/palm: fix ifdef around gen_nand driver registration Reported-by: Rafael Gandolfi Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index d2060a1d1d68..e5c9932b7588 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {} /****************************************************************************** * NAND Flash ******************************************************************************/ -#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { -- cgit v1.2.1 From e6afec9b6808eff6dc392ac07c1552e87aebcdf7 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Fri, 26 Nov 2010 13:45:43 +0100 Subject: ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts This change limits number of GIC-originating interrupts to the platform maximum (defined by NR_IRQS) while still initialising all distributor registers. Signed-off-by: Pawel Moll Signed-off-by: Russell King --- arch/arm/common/gic.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 772f95f1aecd..fea1bd7249b6 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -210,7 +210,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start) { - unsigned int max_irq, i; + unsigned int gic_irqs, irq_limit, i; u32 cpumask = 1 << smp_processor_id(); if (gic_nr >= MAX_GIC_NR) @@ -226,47 +226,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, /* * Find out how many interrupts are supported. - */ - max_irq = readl(base + GIC_DIST_CTR) & 0x1f; - max_irq = (max_irq + 1) * 32; - - /* * The GIC only supports up to 1020 interrupt sources. - * Limit this to either the architected maximum, or the - * platform maximum. */ - if (max_irq > max(1020, NR_IRQS)) - max_irq = max(1020, NR_IRQS); + gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; /* * Set all global interrupts to be level triggered, active low. */ - for (i = 32; i < max_irq; i += 16) + for (i = 32; i < gic_irqs; i += 16) writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); /* * Set all global interrupts to this CPU only. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* * Set priority on all global interrupts. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* * Disable all interrupts. Leave the PPI and SGIs alone * as these enables are banked registers. */ - for (i = 32; i < max_irq; i += 32) + for (i = 32; i < gic_irqs; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + /* + * Limit number of interrupts registered to the platform maximum + */ + irq_limit = gic_data[gic_nr].irq_offset + gic_irqs; + if (WARN_ON(irq_limit > NR_IRQS)) + irq_limit = NR_IRQS; + /* * Setup the Linux IRQ subsystem. */ - for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) { + for (i = irq_start; i < irq_limit; i++) { set_irq_chip(i, &gic_chip); set_irq_chip_data(i, &gic_data[gic_nr]); set_irq_handler(i, handle_level_irq); -- cgit v1.2.1 From bc8b57f08c53344d13e3b5e644c56c0355899b47 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:21 +0100 Subject: ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/relocate_kernel.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index fd26f8d65151..9cf4cbf8f95b 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -59,6 +59,8 @@ relocate_new_kernel: ldr r2,kexec_boot_atags mov pc,lr + .align + .globl kexec_start_address kexec_start_address: .long 0x0 -- cgit v1.2.1 From 7eb25ebee894ba2f8a591a83e45accc091ced19f Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:22 +0100 Subject: ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/vfp/vfphw.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index d66cead97d28..9897dcfc16d6 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -206,6 +206,7 @@ ENTRY(vfp_save_state) mov pc, lr ENDPROC(vfp_save_state) + .align last_VFP_context_address: .word last_VFP_context -- cgit v1.2.1 From 077248fcce5edabb1b77ba3269e6c72341769d94 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:23 +0100 Subject: ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/boot/bootp/init.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 8b0de41c3dcb..78b508075161 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time .size _start, . - _start + .align + .type data,#object data: .word initrd_start @ source initrd address .word initrd_phys @ destination initrd address -- cgit v1.2.1 From 4f79a5dd7c3e316e2230dc0ee665c40a39023a81 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:24 +0100 Subject: ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/head.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index dd6b369ac69c..591c097c89ab 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -262,6 +262,7 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg + .align __enable_mmu_loc: .long . .long __enable_mmu @@ -308,6 +309,8 @@ ENTRY(__secondary_switched) b secondary_start_kernel ENDPROC(__secondary_switched) + .align + .type __secondary_data, %object __secondary_data: .long . @@ -413,6 +416,7 @@ __fixup_smp_on_up: mov pc, lr ENDPROC(__fixup_smp) + .align 1: .word . .word __smpalt_begin .word __smpalt_end -- cgit v1.2.1 From 6323875db20fd8ca8c8fbbd608bc377f2d4c8cf5 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:25 +0100 Subject: ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. In this specific case, we can achieve the desired alignment by forcing a 32-bit branch instruction using the W() macro, since the assembler location counter is already 32-bit aligned in this case. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 53cbe2225153..9b9ff5d949fd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -381,7 +381,7 @@ __v7_ca9mp_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_ca9mp_setup + W(b) __v7_ca9mp_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS @@ -413,7 +413,7 @@ __v7_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_setup + W(b) __v7_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS -- cgit v1.2.1 From bfa64c4ab1235b732542f11f4e0005e1774f779a Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:26 +0100 Subject: ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S Some instruction operand combinations are used here which are nor permitted in Thumb-2. In particular, most uses of pc as an operand are disallowed in Thumb-2, and deprecated in ARM from ARMv7 onwards. The modified code introduced by this patch should be compatible with all architecture versions >= v3, with or without CONFIG_THUMB2_KERNEL. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 9be21ba648cd..be97e0832d73 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -174,7 +174,8 @@ not_angel: ldr sp, [r0, #28] #ifdef CONFIG_AUTO_ZRELADDR @ determine final kernel image address - and r4, pc, #0xf8000000 + mov r4, pc + and r4, r4, #0xf8000000 add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -445,7 +446,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size */ mov r1, #0x1e orr r1, r1, #3 << 10 - mov r2, pc, lsr #20 + mov r2, pc + mov r2, r2, lsr #20 orr r1, r1, r2, lsl #20 add r0, r3, r2, lsl #2 str r1, [r0], #4 -- cgit v1.2.1 From 26e5ca93dda9425f8ff78ccb2f9b193328087e45 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:27 +0100 Subject: ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL The code which makes up the zImage header intends to leave a 32-byte gap followed by a branch to the real entry point, a magic number, and a word containing the absolute entry point address. This gets messed up with with CONFIG_THUMB2_KERNEL, because the size of the initial padding NOPs changes. Instead, the header can be made fully compatible by restoring it to ARM. In the Thumb-2 case, we can replace the initial NOPs with a sequence which switches to Thumb and jumps to the real entry point. As a consequence, the zImage entry point is now always ARM, so no special magic is needed any more for the uImage rules in the Thumb-2 case. Signed-off-by: Dave Martin Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/Makefile | 5 ----- arch/arm/boot/compressed/head.S | 7 ++++++- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e2..4d26f2c52a75 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -70,12 +70,7 @@ else $(obj)/uImage: LOADADDR=$(ZRELADDR) endif -ifeq ($(CONFIG_THUMB2_KERNEL),y) -# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode -$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/") -else $(obj)/uImage: STARTADDR=$(LOADADDR) -endif $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index be97e0832d73..7193884ed8b0 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0 * sort out different calling conventions */ .align + .arm @ Always enter in ARM state start: .type start,#function - .rept 8 + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .rept 6 ) + ARM( .rept 8 ) mov r0, r0 .endr @@ -135,6 +139,7 @@ start: .word 0x016f2818 @ Magic numbers to help the loader .word start @ absolute load/run zImage address .word _edata @ zImage end address + THUMB( .thumb ) 1: mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer -- cgit v1.2.1 From a75e5248c51af1eaeed936be6bd3497b93f09685 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:28 +0100 Subject: ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2. The 32-bit conditional branches in Thumb-2 have a shorter range (+/-512K) than their ARM counterparts (+/-32MB). The linker does not currently generate trampolines to extend the range of these Thumb-2 conditional branches, resulting in link errors when vmlinux is sufficiently large, e.g.: head.o:(.text+0x464): relocation truncated to fit: R_ARM_THM_JUMP19 This patch forces the longer-range, unconditional branch encoding by use of an explicit IT instruction. The resulting branches are triggered on the same conditions as before. Signed-off-by: Dave Martin Signed-off-by: Russell King --- arch/arm/kernel/head.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 591c097c89ab..6bd82d25683c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -85,9 +85,11 @@ ENTRY(stext) mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_a @ yes, error 'a' bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -283,6 +285,7 @@ ENTRY(secondary_startup) bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p /* -- cgit v1.2.1 From 725ca4adaea07460accd4622d44bcc7eaa34da09 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 30 Nov 2010 13:04:36 +0100 Subject: ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/headsmp.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S index 4075473cf68a..b34be4554d40 100644 --- a/arch/arm/mach-realview/headsmp.S +++ b/arch/arm/mach-realview/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release -- cgit v1.2.1 From 618d9c8f9e554b5eaaca3f8e55a28e1a928a8571 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 30 Nov 2010 13:05:10 +0100 Subject: ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-vexpress/headsmp.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S index 8a78ff68e1ee..7a3f0632947c 100644 --- a/arch/arm/mach-vexpress/headsmp.S +++ b/arch/arm/mach-vexpress/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release -- cgit v1.2.1 From ed7c84d54837b182c5f56f821ef213c8ca817a91 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:29 +0100 Subject: ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected Currently, the kprobes implementation for ARM only supports the ARM instruction set, so it only works if CONFIG_THUMB2_KERNEL is not enabled. Until kprobes is updated to work with Thumb-2, turning it on will cause horrible things to happen, so this patch disables it for now. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db524e75c4a2..f1d9297b1050 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB - select HAVE_KPROBES if (!XIP_KERNEL) + select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) -- cgit v1.2.1 From 8ae8cd978bc773e916e0b51a76fe3f096fa31069 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:23:28 +0800 Subject: at91: Convert remaining boards to new-style UART initialization Convert the following AT91RM9200-based boards to the new-style UART initialization: - Ajeco 1ARM Single Board Computer - Sperry-Sun KAFA board - picotux 200 Remove the deprecated at91_init_serial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/at91rm9200_devices.c | 45 --------------------------------- arch/arm/mach-at91/board-1arm.c | 26 +++++++++---------- arch/arm/mach-at91/board-kafa.c | 21 ++++++--------- arch/arm/mach-at91/board-picotux200.c | 23 ++++++++--------- arch/arm/mach-at91/include/mach/board.h | 6 ----- 5 files changed, 31 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9338825cfcd7..7b539228e0ef 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins) static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91rm9200_dbgu_device; - at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 46bdc82d3fbf..8a3fc84847c1 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,24 +39,24 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata onearm_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ -}; - static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); - /* Setup the serial ports and console */ - at91_init_serial(&onearm_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init onearm_init_irq(void) diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c0ce79d431a0..d2e1f4ec1fcc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,17 +39,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata kafa_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init kafa_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -58,8 +47,14 @@ static void __init kafa_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Setup the serial ports and console */ - at91_init_serial(&kafa_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init kafa_init_irq(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 9d833bbc592d..ac1a3b527b34 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,24 +43,21 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata picotux200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init picotux200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); - /* Setup the serial ports and console */ - at91_init_serial(&picotux200_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init picotux200_init_irq(void) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 58528aa9c8a8..2b499eb343a1 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); extern void __init at91_set_serial_console(unsigned portnr); -struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ -}; extern struct platform_device *atmel_default_console_device; -extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ -- cgit v1.2.1 From 8e79d2d4e7147eb6dfd075d7cb200c666566a9e0 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:31:03 +0800 Subject: at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/board-dk.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index e14f0e165680..16dfd0c38472 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = { // .vcc_pin = ... always powered }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, }; +#endif static struct spi_board_info dk_spi_devices[] = { { /* DataFlash chip */ -- cgit v1.2.1 From 55d83b0a6eb61d159a4a6d269745ee019f9f5f91 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:31:35 +0800 Subject: at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/board-ek.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index 56e92c4bbc2a..6203cdff3571 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = AT91_PIN_PD5, }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; +#endif static struct spi_board_info ek_spi_devices[] = { { /* DataFlash chip */ -- cgit v1.2.1 From 985f554d8f0c2cf5bda5720921cb48654420d6b1 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:34:38 +0800 Subject: at91: rename rm9200ek and rm9200dk board file name to be a few more concistant with the other boards as ek is for evaluation kit and dk for development kit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/Makefile | 4 +- arch/arm/mach-at91/board-dk.c | 235 ------------------------------------ arch/arm/mach-at91/board-ek.c | 201 ------------------------------ arch/arm/mach-at91/board-rm9200dk.c | 235 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-at91/board-rm9200ek.c | 201 ++++++++++++++++++++++++++++++ 5 files changed, 438 insertions(+), 438 deletions(-) delete mode 100644 arch/arm/mach-at91/board-dk.c delete mode 100644 arch/arm/mach-at91/board-ek.c create mode 100644 arch/arm/mach-at91/board-rm9200dk.c create mode 100644 arch/arm/mach-at91/board-rm9200ek.c (limited to 'arch') diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 821eb842795f..62d686f0b426 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c deleted file mode 100644 index 16dfd0c38472..000000000000 --- a/arch/arm/mach-at91/board-dk.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-dk.c - * - * Copyright (C) 2005 SAN People - * - * Epson S1D framebuffer glue code is: - * Copyright (C) 2005 Thibaut VARENE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "generic.h" - - -static void __init dk_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init dk_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - -static struct at91_eth_data __initdata dk_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata dk_usbh_data = { - .ports = 2, -}; - -static struct at91_udc_data __initdata dk_udc_data = { - .vbus_pin = AT91_PIN_PD4, - .pullup_pin = AT91_PIN_PD5, -}; - -static struct at91_cf_data __initdata dk_cf_data = { - .det_pin = AT91_PIN_PB0, - .rst_pin = AT91_PIN_PC5, - // .irq_pin = ... not connected - // .vcc_pin = ... always powered -}; - -#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata dk_mmc_data = { - .slot_b = 0, - .wire4 = 1, -}; -#endif - -static struct spi_board_info dk_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - }, - { /* UR6HCPS2-SP40 PS2-to-SPI adapter */ - .modalias = "ur6hcps2", - .chip_select = 1, - .max_speed_hz = 250 * 1000, - }, - { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */ - .modalias = "tlv1504", - .chip_select = 2, - .max_speed_hz = 20 * 1000 * 1000, - }, -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - } -#endif -}; - -static struct i2c_board_info __initdata dk_i2c_devices[] = { - { - I2C_BOARD_INFO("ics1523", 0x26), - }, - { - I2C_BOARD_INFO("x9429", 0x28), - }, - { - I2C_BOARD_INFO("24c1024", 0x50), - } -}; - -static struct mtd_partition __initdata dk_nand_partition[] = { - { - .name = "NAND Partition 1", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(dk_nand_partition); - return dk_nand_partition; -} - -static struct atmel_nand_data __initdata dk_nand_data = { - .ale = 22, - .cle = 21, - .det_pin = AT91_PIN_PB1, - .rdy_pin = AT91_PIN_PC2, - // .enable_pin = ... not there - .partition_info = nand_partitions, -}; - -#define DK_FLASH_BASE AT91_CHIPSELECT_0 -#define DK_FLASH_SIZE SZ_2M - -static struct physmap_flash_data dk_flash_data = { - .width = 2, -}; - -static struct resource dk_flash_resource = { - .start = DK_FLASH_BASE, - .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device dk_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &dk_flash_data, - }, - .resource = &dk_flash_resource, - .num_resources = 1, -}; - -static struct gpio_led dk_leds[] = { - { - .name = "led0", - .gpio = AT91_PIN_PB2, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -static void __init dk_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&dk_eth_data); - /* USB Host */ - at91_add_device_usbh(&dk_usbh_data); - /* USB Device */ - at91_add_device_udc(&dk_udc_data); - at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ - /* Compact Flash */ - at91_add_device_cf(&dk_cf_data); - /* I2C */ - at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices)); - /* SPI */ - at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB7, 0); -#else - /* MMC */ - at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &dk_mmc_data); -#endif - /* NAND */ - at91_add_device_nand(&dk_nand_data); - /* NOR Flash */ - platform_device_register(&dk_flash); - /* LEDs */ - at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); - /* VGA */ -// dk_add_device_video(); -} - -MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") - /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91rm9200_timer, - .map_io = dk_map_io, - .init_irq = dk_init_irq, - .init_machine = dk_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c deleted file mode 100644 index 6203cdff3571..000000000000 --- a/arch/arm/mach-at91/board-ek.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-ek.c - * - * Copyright (C) 2005 SAN People - * - * Epson S1D framebuffer glue code is: - * Copyright (C) 2005 Thibaut VARENE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "generic.h" - - -static void __init ek_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init ek_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - -static struct at91_eth_data __initdata ek_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, -}; - -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PD4, - .pullup_pin = AT91_PIN_PD5, -}; - -#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata ek_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, -}; -#endif - -static struct spi_board_info ek_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - }, -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - }, -#endif -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("ics1523", 0x26), - }, - { - I2C_BOARD_INFO("dac3550", 0x4d), - } -}; - -#define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M - -static struct physmap_flash_data ek_flash_data = { - .width = 2, -}; - -static struct resource ek_flash_resource = { - .start = EK_FLASH_BASE, - .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ek_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ek_flash_data, - }, - .resource = &ek_flash_resource, - .num_resources = 1, -}; - -static struct gpio_led ek_leds[] = { - { /* "user led 1", DS2 */ - .name = "green", - .gpio = AT91_PIN_PB0, - .active_low = 1, - .default_trigger = "mmc0", - }, - { /* "user led 2", DS4 */ - .name = "yellow", - .gpio = AT91_PIN_PB1, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* "user led 3", DS6 */ - .name = "red", - .gpio = AT91_PIN_PB2, - .active_low = 1, - } -}; - -static void __init ek_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&ek_eth_data); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else - /* MMC */ - at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &ek_mmc_data); -#endif - /* NOR Flash */ - platform_device_register(&ek_flash); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* VGA */ -// ek_add_device_video(); -} - -MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") - /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91rm9200_timer, - .map_io = ek_map_io, - .init_irq = ek_init_irq, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c new file mode 100644 index 000000000000..4c1047c8200d --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -0,0 +1,235 @@ +/* + * linux/arch/arm/mach-at91/board-rm9200dk.c + * + * Copyright (C) 2005 SAN People + * + * Epson S1D framebuffer glue code is: + * Copyright (C) 2005 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "generic.h" + + +static void __init dk_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init dk_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata dk_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata dk_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata dk_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +static struct at91_cf_data __initdata dk_cf_data = { + .det_pin = AT91_PIN_PB0, + .rst_pin = AT91_PIN_PC5, + // .irq_pin = ... not connected + // .vcc_pin = ... always powered +}; + +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD +static struct at91_mmc_data __initdata dk_mmc_data = { + .slot_b = 0, + .wire4 = 1, +}; +#endif + +static struct spi_board_info dk_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, + { /* UR6HCPS2-SP40 PS2-to-SPI adapter */ + .modalias = "ur6hcps2", + .chip_select = 1, + .max_speed_hz = 250 * 1000, + }, + { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */ + .modalias = "tlv1504", + .chip_select = 2, + .max_speed_hz = 20 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + } +#endif +}; + +static struct i2c_board_info __initdata dk_i2c_devices[] = { + { + I2C_BOARD_INFO("ics1523", 0x26), + }, + { + I2C_BOARD_INFO("x9429", 0x28), + }, + { + I2C_BOARD_INFO("24c1024", 0x50), + } +}; + +static struct mtd_partition __initdata dk_nand_partition[] = { + { + .name = "NAND Partition 1", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(dk_nand_partition); + return dk_nand_partition; +} + +static struct atmel_nand_data __initdata dk_nand_data = { + .ale = 22, + .cle = 21, + .det_pin = AT91_PIN_PB1, + .rdy_pin = AT91_PIN_PC2, + // .enable_pin = ... not there + .partition_info = nand_partitions, +}; + +#define DK_FLASH_BASE AT91_CHIPSELECT_0 +#define DK_FLASH_SIZE SZ_2M + +static struct physmap_flash_data dk_flash_data = { + .width = 2, +}; + +static struct resource dk_flash_resource = { + .start = DK_FLASH_BASE, + .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device dk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &dk_flash_data, + }, + .resource = &dk_flash_resource, + .num_resources = 1, +}; + +static struct gpio_led dk_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + +static void __init dk_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&dk_eth_data); + /* USB Host */ + at91_add_device_usbh(&dk_usbh_data); + /* USB Device */ + at91_add_device_udc(&dk_udc_data); + at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* Compact Flash */ + at91_add_device_cf(&dk_cf_data); + /* I2C */ + at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices)); + /* SPI */ + at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB7, 0); +#else + /* MMC */ + at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ + at91_add_device_mmc(0, &dk_mmc_data); +#endif + /* NAND */ + at91_add_device_nand(&dk_nand_data); + /* NOR Flash */ + platform_device_register(&dk_flash); + /* LEDs */ + at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); + /* VGA */ +// dk_add_device_video(); +} + +MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") + /* Maintainer: SAN People/Atmel */ + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = dk_map_io, + .init_irq = dk_init_irq, + .init_machine = dk_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c new file mode 100644 index 000000000000..9df1be8818c0 --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -0,0 +1,201 @@ +/* + * linux/arch/arm/mach-at91/board-rm9200ek.c + * + * Copyright (C) 2005 SAN People + * + * Epson S1D framebuffer glue code is: + * Copyright (C) 2005 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "generic.h" + + +static void __init ek_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init ek_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata ek_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD +static struct at91_mmc_data __initdata ek_mmc_data = { + .det_pin = AT91_PIN_PB27, + .slot_b = 0, + .wire4 = 1, + .wp_pin = AT91_PIN_PA17, +}; +#endif + +static struct spi_board_info ek_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + }, +#endif +}; + +static struct i2c_board_info __initdata ek_i2c_devices[] = { + { + I2C_BOARD_INFO("ics1523", 0x26), + }, + { + I2C_BOARD_INFO("dac3550", 0x4d), + } +}; + +#define EK_FLASH_BASE AT91_CHIPSELECT_0 +#define EK_FLASH_SIZE SZ_2M + +static struct physmap_flash_data ek_flash_data = { + .width = 2, +}; + +static struct resource ek_flash_resource = { + .start = EK_FLASH_BASE, + .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ek_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ek_flash_data, + }, + .resource = &ek_flash_resource, + .num_resources = 1, +}; + +static struct gpio_led ek_leds[] = { + { /* "user led 1", DS2 */ + .name = "green", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "user led 2", DS4 */ + .name = "yellow", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "user led 3", DS6 */ + .name = "red", + .gpio = AT91_PIN_PB2, + .active_low = 1, + } +}; + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&ek_eth_data); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* I2C */ + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB22, 0); +#else + /* MMC */ + at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ + at91_add_device_mmc(0, &ek_mmc_data); +#endif + /* NOR Flash */ + platform_device_register(&ek_flash); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* VGA */ +// ek_add_device_video(); +} + +MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") + /* Maintainer: SAN People/Atmel */ + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END -- cgit v1.2.1 From 82d5b5c8da769184a9bc2cc2adc90555f4aa90b0 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 21 Nov 2010 10:31:19 +0800 Subject: at91/picotux200: remove commenting usb device and dataflash support as based on http://www.picotux.com/pt200/picotux200.pdf these board does not have such I/O Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-picotux200.c | 30 ------------------------------ 1 file changed, 30 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ac1a3b527b34..55dad3a46547 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -74,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, }; -// static struct at91_udc_data __initdata picotux200_udc_data = { -// .vbus_pin = AT91_PIN_PD4, -// .pullup_pin = AT91_PIN_PD5, -// }; - static struct at91_mmc_data __initdata picotux200_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, @@ -86,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .wp_pin = AT91_PIN_PA17, }; -// static struct spi_board_info picotux200_spi_devices[] = { -// { /* DataFlash chip */ -// .modalias = "mtd_dataflash", -// .chip_select = 0, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -// { /* DataFlash card */ -// .modalias = "mtd_dataflash", -// .chip_select = 3, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #endif -// }; - #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 #define PICOTUX200_FLASH_SIZE SZ_4M @@ -132,21 +112,11 @@ static void __init picotux200_board_init(void) at91_add_device_eth(&picotux200_eth_data); /* USB Host */ at91_add_device_usbh(&picotux200_usbh_data); - /* USB Device */ - // at91_add_device_udc(&picotux200_udc_data); - // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ at91_add_device_i2c(NULL, 0); - /* SPI */ - // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &picotux200_mmc_data); -#endif /* NOR Flash */ platform_device_register(&picotux200_flash); } -- cgit v1.2.1 From 3b24f0950bc55ca604a9f0da3ca894f9315cb573 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 21 Nov 2010 11:24:07 +0800 Subject: at91/board-yl-9200: fix typo in video support for the epson frambuffer support it's CONFIG_FB_S1D13XXX not CONFIG_FB_S1D135XX Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-yl-9200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 89df00a9d2f7..e0f0080eb639 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = { * EPSON S1D13806 FB (discontinued chip) * EPSON S1D13506 FB */ -#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include