From dd0a028183369cccc0826199a7ccdc850ece289b Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 12 Aug 2011 08:28:35 +0200 Subject: MIPS: Alchemy: DB1200: Disable cascade IRQ in handler Disable the cascade IRQ in the cascade handler. This is required to get the DB1300 working, and also gets rid of all spurious interrupts previously observed on the DB1200; so Config[OD] can be disabled again for better performance. Signed-off-by: Manuel Lauss To: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/2708/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/devboards/bcsr.c | 4 ++++ arch/mips/alchemy/devboards/db1200/setup.c | 7 ------- 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c index 596ad00e7f05..463d2c4d9441 100644 --- a/arch/mips/alchemy/devboards/bcsr.c +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -89,8 +89,12 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d) { unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT); + disable_irq_nosync(irq); + for ( ; bisr; bisr &= bisr - 1) generic_handle_irq(bcsr_csc_base + __ffs(bisr)); + + enable_irq(irq); } /* NOTE: both the enable and mask bits must be cleared, otherwise the diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index 1dac4f27d334..4a8980027ecf 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -23,13 +23,6 @@ void __init board_setup(void) unsigned long freq0, clksrc, div, pfc; unsigned short whoami; - /* Set Config[OD] (disable overlapping bus transaction): - * This gets rid of a _lot_ of spurious interrupts (especially - * wrt. IDE); but incurs ~10% performance hit in some - * cpu-bound applications. - */ - set_c0_config(1 << 19); - bcsr_init(DB1200_BCSR_PHYS_ADDR, DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); -- cgit v1.2.1