From a393c46b493de18242105c7f7e713822d179a717 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 20 Apr 2008 07:25:00 +0100 Subject: [ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixup This patch adds the include of the GPIO header needed to make gumstix build. The defconfig is updated to 2.6.25 and disables PCMCIA since that has not yet been implemented for gumstix. Signed-off-by: Jaya Kumar Signed-off-by: Russell King --- arch/arm/configs/am200epdkit_defconfig | 22 +++++++++++----------- arch/arm/mach-pxa/gumstix.c | 1 + 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index dc030cfe5009..5e68420f4680 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc3 -# Sun Mar 9 06:33:33 2008 +# Linux kernel version: 2.6.25 +# Sun Apr 20 00:29:49 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -51,7 +51,8 @@ CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set @@ -85,6 +86,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,7 +117,6 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System Type @@ -320,8 +321,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -383,7 +382,6 @@ CONFIG_IEEE80211=m CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_CCMP is not set # CONFIG_IEEE80211_CRYPT_TKIP is not set -# CONFIG_IEEE80211_SOFTMAC is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -503,7 +501,7 @@ CONFIG_IDE_MAX_HWIFS=2 CONFIG_BLK_DEV_IDE=m # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=m @@ -518,10 +516,9 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=m # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -562,6 +559,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_PPP is not set @@ -707,6 +705,8 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices @@ -745,6 +745,7 @@ CONFIG_FB_TILEBLITTING=y CONFIG_FB_PXA=y CONFIG_FB_PXA_PARAMETERS=y CONFIG_FB_MBX=m +# CONFIG_FB_METRONOME is not set CONFIG_FB_VIRTUAL=m # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -891,7 +892,6 @@ CONFIG_RTC_LIB=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index f01d18544133..bdf239754037 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -40,6 +40,7 @@ #include #include +#include #include "generic.h" -- cgit v1.2.1 From a1999cd1c1c9230c850379f59525c4a585191ed5 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 20 Apr 2008 17:39:12 +0100 Subject: [ARM] 5007/1: magician: properly request GPIOs used by the machine code itself Registers some GPIOs used in magician.c with the GPIO API. Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- arch/arm/mach-pxa/magician.c | 51 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 43 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index d70be75bd199..e0c7135a1544 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -543,9 +543,28 @@ static struct platform_device power_supply = { static int magician_mci_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_MAGICIAN_SD, detect_irq, + int err; + + err = request_irq(IRQ_MAGICIAN_SD, detect_irq, IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "MMC card detect", data); + if (err) + goto err_request_irq; + err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER"); + if (err) + goto err_request_power; + err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY"); + if (err) + goto err_request_readonly; + + return 0; + +err_request_readonly: + gpio_free(EGPIO_MAGICIAN_SD_POWER); +err_request_power: + free_irq(IRQ_MAGICIAN_SD, data); +err_request_irq: + return err; } static void magician_mci_setpower(struct device *dev, unsigned int vdd) @@ -562,6 +581,8 @@ static int magician_mci_get_ro(struct device *dev) static void magician_mci_exit(struct device *dev, void *data) { + gpio_free(EGPIO_MAGICIAN_nSD_READONLY); + gpio_free(EGPIO_MAGICIAN_SD_POWER); free_irq(IRQ_MAGICIAN_SD, data); } @@ -643,28 +664,42 @@ static void __init magician_init(void) { void __iomem *cpld; int lcd_select; + int err; + + gpio_request(GPIO13_MAGICIAN_CPLD_IRQ, "CPLD_IRQ"); + gpio_request(GPIO107_MAGICIAN_DS1WM_IRQ, "DS1WM_IRQ"); pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); platform_add_devices(devices, ARRAY_SIZE(devices)); + + err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN"); + if (!err) { + gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1); + pxa_set_ficp_info(&magician_ficp_info); + } pxa_set_i2c_info(NULL); pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); - pxa_set_ficp_info(&magician_ficp_info); /* Check LCD type we have */ cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); if (cpld) { u8 board_id = __raw_readb(cpld+0x14); + iounmap(cpld); system_rev = board_id & 0x7; lcd_select = board_id & 0x8; - iounmap(cpld); pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); - if (lcd_select && (system_rev < 3)) - pxa_gpio_mode(GPIO75_MAGICIAN_SAMSUNG_POWER_MD); - pxa_gpio_mode(GPIO104_MAGICIAN_LCD_POWER_1_MD); - pxa_gpio_mode(GPIO105_MAGICIAN_LCD_POWER_2_MD); - pxa_gpio_mode(GPIO106_MAGICIAN_LCD_POWER_3_MD); + if (lcd_select && (system_rev < 3)) { + gpio_request(GPIO75_MAGICIAN_SAMSUNG_POWER, "SAMSUNG_POWER"); + gpio_direction_output(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); + } + gpio_request(GPIO104_MAGICIAN_LCD_POWER_1, "LCD_POWER_1"); + gpio_request(GPIO105_MAGICIAN_LCD_POWER_2, "LCD_POWER_2"); + gpio_request(GPIO106_MAGICIAN_LCD_POWER_3, "LCD_POWER_3"); + gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); + gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); + gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); -- cgit v1.2.1 From 2f131958efb62535f85915776e434de74d5eb274 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 20 Apr 2008 17:40:11 +0100 Subject: [ARM] 5008/1: magician: add magician specific input GPIOs to MFP config Some input pin configuration that is not handled by drivers. This should serve mostly as documentation. Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- arch/arm/mach-pxa/magician.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index e0c7135a1544..1fa80c026c0f 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -114,6 +114,14 @@ static unsigned long magician_pin_config[] = { GPIO82_CIF_DD_5, GPIO84_CIF_FV, GPIO85_CIF_LV, + + /* Magician specific input GPIOs */ + GPIO9_GPIO, /* unknown */ + GPIO10_GPIO, /* GSM_IRQ */ + GPIO13_GPIO, /* CPLD_IRQ */ + GPIO107_GPIO, /* DS1WM_IRQ */ + GPIO108_GPIO, /* GSM_READY */ + GPIO115_GPIO, /* nPEN_IRQ */ }; /* -- cgit v1.2.1 From d3930614e68bdf83a120d904c039a64e9f75dba1 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 21 Apr 2008 11:54:13 +0100 Subject: [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. The kernel should clean stale bits from reset status, so that they won't confuse the bootloader. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/mach-pxa/pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 039194cbe477..ec1bbf333a3a 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -46,8 +46,8 @@ int pxa_pm_enter(suspend_state_t state) sleep_save_checksum += sleep_save[i]; } - /* Clear sleep reset status */ - RCSR = RCSR_SMR; + /* Clear reset status */ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); -- cgit v1.2.1 From e03e0590b2b29b62f0480524090e469baa13d5f5 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 24 Apr 2008 18:10:46 +0100 Subject: [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info Platform data must not be marked with __devinit. Even __devinitdata would be wrong as the platform driver can be compiled as a module. Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- arch/arm/mach-pxa/magician.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 1fa80c026c0f..badba064dc04 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -446,7 +446,7 @@ static struct pasic3_led pasic3_leds[] = { static struct platform_device pasic3; -static struct pasic3_leds_machinfo __devinit pasic3_leds_info = { +static struct pasic3_leds_machinfo pasic3_leds_info = { .num_leds = ARRAY_SIZE(pasic3_leds), .power_gpio = EGPIO_MAGICIAN_LED_POWER, .leds = pasic3_leds, -- cgit v1.2.1 From e12177073f28419f1f7eb8dbb93aab6b712c7c04 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 23 Apr 2008 10:28:18 +0100 Subject: [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() pxa3xx_set_wake() silently accepts unsupported wake sources, causing users to believe that they have succesfully configured sources that they haven't. Fail the operation instead. Signed-off-by: Mark Brown Acked-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa3xx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index dde355e88fa1..b6a6f5fcc77a 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -486,6 +486,8 @@ static int pxa3xx_set_wake(unsigned int irq, unsigned int on) case IRQ_MMC3: mask = ADXER_MFP_GEN12; break; + default: + return -EINVAL; } local_irq_save(flags); -- cgit v1.2.1 From 8f79ff0cb5330a92032c30ff586745d3016b34ca Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 23 Apr 2008 18:44:15 -0400 Subject: kprobes/arm: fix cache flush address for instruction stub It is more useful to flush the cache with the actual buffer address rather than the address containing a pointer to the buffer. Signed-off-by: Nicolas Pitre Acked-by: Lennert Buytenhek --- arch/arm/kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 13e371aad879..5593dd207216 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -66,7 +66,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) return -ENOMEM; for (is = 0; is < MAX_INSN_SIZE; ++is) p->ainsn.insn[is] = tmp_insn[is]; - flush_insns(&p->ainsn.insn, MAX_INSN_SIZE); + flush_insns(p->ainsn.insn, MAX_INSN_SIZE); break; case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */ -- cgit v1.2.1 From a3fd133c24e16d430ba21f3d9f5c0b8faeeb37fe Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Apr 2008 01:31:45 -0400 Subject: kprobes/arm: fix decoding of arithmetic immediate instructions The ARM kprobes arithmetic immediate instruction decoder (space_cccc_001x()) was accidentally zero'ing out not only the Rn and Rd arguments, but the lower nibble of the immediate argument as well -- this patch fixes this. Signed-off-by: Lennert Buytenhek Acked-by: Nicolas Pitre --- arch/arm/kernel/kprobes-decode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index d51bc8b60557..b4565bb133c1 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1176,7 +1176,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */ + insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */ asi->insn[0] = insn; asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; -- cgit v1.2.1 From a7039bd6daa32f5ea1a185b7cb0b3b519e1f5018 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Apr 2008 01:31:46 -0400 Subject: [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check Since the Feroceon doesn't have a global WT override bit like ARM926 does, remove all code relating to this mode of operation from proc-feroceon.S. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mm/Kconfig | 2 +- arch/arm/mm/proc-feroceon.S | 40 ---------------------------------------- 2 files changed, 1 insertion(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1b8229d9c9d5..a92a577c1b65 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -658,7 +658,7 @@ config CPU_DCACHE_SIZE config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FEROCEON) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 90e7594e29b1..e9ac984d2897 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -118,12 +118,8 @@ ENTRY(feroceon_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -#else 1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate bne 1b -#endif tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB @@ -145,21 +141,12 @@ ENTRY(feroceon_flush_user_cache_range) cmp r3, #CACHE_DLIMIT bgt __flush_whole_cache 1: tst r2, #VM_EXEC -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry - mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry - add r0, r0, #CACHE_DLINESIZE - mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry - mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry - add r0, r0, #CACHE_DLINESIZE -#else mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry add r0, r0, #CACHE_DLINESIZE mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry add r0, r0, #CACHE_DLINESIZE -#endif cmp r0, r1 blo 1b tst r2, #VM_EXEC @@ -232,12 +219,10 @@ ENTRY(feroceon_flush_kern_dcache_page) * (same as v4wb) */ ENTRY(feroceon_dma_inv_range) -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH tst r0, #CACHE_DLINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry tst r1, #CACHE_DLINESIZE - 1 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry -#endif bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -257,13 +242,11 @@ ENTRY(feroceon_dma_inv_range) * (same as v4wb) */ ENTRY(feroceon_dma_clean_range) -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b -#endif mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -278,11 +261,7 @@ ENTRY(feroceon_dma_clean_range) ENTRY(feroceon_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry -#else - mcr p15, 0, r0, c7, c10, 1 @ clean D entry -#endif add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b @@ -301,12 +280,10 @@ ENTRY(feroceon_cache_fns) .long feroceon_dma_flush_range ENTRY(cpu_feroceon_dcache_clean_area) -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE subs r1, r1, #CACHE_DLINESIZE bhi 1b -#endif mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -323,13 +300,9 @@ ENTRY(cpu_feroceon_dcache_clean_area) ENTRY(cpu_feroceon_switch_mm) #ifdef CONFIG_MMU mov ip, #0 -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -#else @ && 'Clean & Invalidate whole DCache' 1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate bne 1b -#endif mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c7, c10, 4 @ drain WB mcr p15, 0, r0, c2, c0, 0 @ load page table pointer @@ -362,16 +335,9 @@ ENTRY(cpu_feroceon_set_pte_ext) tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? movne r2, #0 -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - eor r3, r2, #0x0a @ C & small page? - tst r3, #0x0b - biceq r2, r2, #4 -#endif str r2, [r0] @ hardware version mov r0, r0 -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, r0, c7, c10, 1 @ clean D entry -#endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif mov pc, lr @@ -387,12 +353,6 @@ __feroceon_setup: mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif - -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mov r0, #4 @ disable write-back on caches explicitly - mcr p15, 7, r0, c15, c0, 0 -#endif - adr r5, feroceon_crval ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 -- cgit v1.2.1 From c5a1e8f7091c33c7f6b53f070d13380facab6607 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Apr 2008 01:31:46 -0400 Subject: [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check Since the Feroceon cache replacement policy is always pseudorandom (and the relevant control register bit is ignored), remove the CONFIG_CPU_CACHE_ROUND_ROBIN check from proc-feroceon.S. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mm/proc-feroceon.S | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index e9ac984d2897..3ceb6785a345 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -358,9 +358,6 @@ __feroceon_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 -#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN - orr r0, r0, #0x4000 @ .1.. .... .... .... -#endif mov pc, lr .size __feroceon_setup, . - __feroceon_setup -- cgit v1.2.1 From 92b913b08b18faa487b0c744282fafd944446ade Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 25 Apr 2008 16:28:33 -0400 Subject: [ARM] Orion: fix ->map_irq() PCIe bus number check The current orion5x board ->map_irq() routines check whether a given bus number lives on the PCIe controller by comparing it with the PCIe controller's primary bus number. This doesn't work in case there are multiple buses in the PCIe domain, i.e. if there exists a PCIe bridge on the primary PCIe bus. This patch adds a helper function (orion5x_pci_map_irq()) that returns the IRQ number for the given PCI device if that device has a hard-wired IRQ, or -1 otherwise, and makes each board's ->map_irq() function use this helper function. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/common.h | 3 +-- arch/arm/mach-orion5x/db88f5281-setup.c | 11 +++++++---- arch/arm/mach-orion5x/dns323-setup.c | 13 +++++++++---- arch/arm/mach-orion5x/kurobox_pro-setup.c | 14 ++++++++++---- arch/arm/mach-orion5x/pci.c | 20 ++++++++++++++------ arch/arm/mach-orion5x/rd88f5182-setup.c | 9 ++++++--- arch/arm/mach-orion5x/ts209-setup.c | 11 +++++++---- 7 files changed, 54 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index f4c4c9a72a7c..14adf8d1a54a 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -33,10 +33,9 @@ struct pci_sys_data; struct pci_bus; void orion5x_pcie_id(u32 *dev, u32 *rev); -int orion5x_pcie_local_bus_nr(void); -int orion5x_pci_local_bus_nr(void); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); +int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); /* * Valid GPIO pins according to MPP setup, used by machine-setup. diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 872aed372327..83e9ad4cf190 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -241,14 +241,17 @@ void __init db88f5281_pci_preinit(void) static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCIE IRQ is connected internally (not GPIO) + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* - * PCI IRQs are connected via GPIOs + * PCI IRQs are connected via GPIOs. */ switch (slot - DB88F5281_PCI_SLOT0_OFFS) { case 0: diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index d67790ef236e..46181737fb75 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -43,11 +43,16 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - /* PCI-E */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + int irq; - pr_err("%s: requested mapping for unknown bus\n", __func__); + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + pr_err("%s: requested mapping for unknown device\n", __func__); return -1; } diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 91413455beba..36cf76388693 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -120,13 +120,19 @@ static struct platform_device kurobox_pro_nor_flash = { static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + /* * PCI isn't used on the Kuro */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; - else - printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); + printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); return -1; } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index fdf99fca85b3..9d5d39fa19c3 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -41,11 +41,6 @@ void __init orion5x_pcie_id(u32 *dev, u32 *rev) *rev = orion_pcie_rev(PCIE_BASE); } -int __init orion5x_pcie_local_bus_nr(void) -{ - return orion_pcie_get_local_bus_nr(PCIE_BASE); -} - static int pcie_valid_config(int bus, int dev) { /* @@ -269,7 +264,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) */ static DEFINE_SPINLOCK(orion5x_pci_lock); -int orion5x_pci_local_bus_nr(void) +static int orion5x_pci_local_bus_nr(void) { u32 conf = orion5x_read(PCI_P2P_CONF); return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); @@ -557,3 +552,16 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys return bus; } + +int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int bus = dev->bus->number; + + /* + * PCIe endpoint? + */ + if (bus < orion5x_pci_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + return -1; +} diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 37e8b2dc3ed5..b4315dfd4a35 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -172,11 +172,14 @@ void __init rd88f5182_pci_preinit(void) static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCI-E isn't used on the RD2 + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* * PCI IRQs are connected via GPIOs diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index fd43863a86f6..d3a892283dd0 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -141,14 +141,17 @@ void __init qnap_ts209_pci_preinit(void) static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCIE IRQ is connected internally (not GPIO) + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* - * PCI IRQs are connected via GPIOs + * PCI IRQs are connected via GPIOs. */ switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { case 0: -- cgit v1.2.1 From 994cab846422bc9c636cc780a48b7370e837a3bb Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 25 Apr 2008 16:30:21 -0400 Subject: [ARM] Orion: fix orion-ehci platform resource end addresses End addresses in 'struct resource' are inclusive -- fix the common orion5x code to pass in the proper end addresses when instantiating the two on-chip EHCI controllers. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 439c7784af02..c13800b8e372 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -132,7 +132,7 @@ static struct platform_device orion5x_uart = { static struct resource orion5x_ehci0_resources[] = { { .start = ORION5X_USB0_PHYS_BASE, - .end = ORION5X_USB0_PHYS_BASE + SZ_4K, + .end = ORION5X_USB0_PHYS_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { @@ -145,7 +145,7 @@ static struct resource orion5x_ehci0_resources[] = { static struct resource orion5x_ehci1_resources[] = { { .start = ORION5X_USB1_PHYS_BASE, - .end = ORION5X_USB1_PHYS_BASE + SZ_4K, + .end = ORION5X_USB1_PHYS_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { -- cgit v1.2.1 From b46926bb2d9977799c88aef17a4386ee02c326d8 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 25 Apr 2008 16:31:32 -0400 Subject: [ARM] Orion: catch a couple more alternative spellings of PCIe Unify a couple more spellings of "PCIe" ("PCI-E", "PCIE".) Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/addr-map.c | 4 ++-- arch/arm/mach-orion5x/common.c | 2 +- arch/arm/mach-orion5x/dns323-setup.c | 4 ++-- arch/arm/mach-orion5x/kurobox_pro-setup.c | 2 +- arch/arm/mach-orion5x/rd88f5182-setup.c | 2 +- arch/arm/mach-orion5x/ts209-setup.c | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 6b179371e0a2..9608503d67f5 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -19,14 +19,14 @@ /* * The Orion has fully programable address map. There's a separate address - * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, + * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own * address decode windows that allow it to access any of the Orion resources. * * CPU address decoding -- * Linux assumes that it is the boot loader that already setup the access to * DDR and internal registers. - * Setup access to PCI and PCI-E IO/MEM space is issued by this file. + * Setup access to PCI and PCIe IO/MEM space is issued by this file. * Setup access to various devices located on the device bus interface (e.g. * flashes, RTC, etc) should be issued by machine-setup.c according to * specific board population (by using orion5x_setup_*_win()). diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index c13800b8e372..968deb58be01 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -317,7 +317,7 @@ struct sys_timer orion5x_timer = { ****************************************************************************/ /* - * Identify device ID and rev from PCIE configuration header space '0'. + * Identify device ID and rev from PCIe configuration header space '0'. */ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 46181737fb75..5bc064b8bb44 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -258,9 +258,9 @@ static void __init dns323_init(void) */ orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); - /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE + /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe * - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, ORION5X_PCIE_WA_SIZE); diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 36cf76388693..36760c6e54c0 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -199,7 +199,7 @@ static void __init kurobox_pro_init(void) orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE); /* - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, ORION5X_PCIE_WA_SIZE); diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index b4315dfd4a35..aebe6b8e5059 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -262,7 +262,7 @@ static void __init rd88f5182_init(void) orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); /* - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, ORION5X_PCIE_WA_SIZE); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index d3a892283dd0..161c965f3906 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -376,7 +376,7 @@ static void __init qnap_ts209_init(void) QNAP_TS209_NOR_BOOT_SIZE); /* - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, ORION5X_PCIE_WA_SIZE); -- cgit v1.2.1 From 7883938b0d5ee8dd6381e1e2a9f71254252fd504 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 29 Apr 2008 21:28:03 +0100 Subject: [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b The referenced commit changed the order such that the CPU code was initialised before MFP, resulting in unregistered MFP sysfs objects being referenced. Reverse the link order of these so MFP is initialised before the CPU code. Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 7cdcb459ea9d..6a830853aa6a 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -5,9 +5,9 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ time.o gpio.o -obj-$(CONFIG_PXA25x) += pxa25x.o mfp-pxa2xx.o -obj-$(CONFIG_PXA27x) += pxa27x.o mfp-pxa2xx.o -obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp-pxa3xx.o smemc.o +obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o +obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o +obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o -- cgit v1.2.1