From 7e36e2f5355ab87f8946041d044b34cda01e2077 Mon Sep 17 00:00:00 2001 From: Rod Whitby Date: Tue, 1 Apr 2008 10:53:23 +0100 Subject: [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby Signed-off-by: Russell King --- arch/arm/configs/ixp4xx_defconfig | 9 +- arch/arm/mach-ixp4xx/Kconfig | 9 ++ arch/arm/mach-ixp4xx/Makefile | 2 + arch/arm/mach-ixp4xx/fsg-pci.c | 71 ++++++++++ arch/arm/mach-ixp4xx/fsg-setup.c | 276 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 363 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-ixp4xx/fsg-pci.c create mode 100644 arch/arm/mach-ixp4xx/fsg-setup.c (limited to 'arch') diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index efa0485d2f7e..fc14932e3abd 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y CONFIG_MACH_NAS100D=y CONFIG_MACH_DSMG600=y CONFIG_ARCH_IXDP4XX=y +CONFIG_MACH_FSG=y CONFIG_CPU_IXP46X=y CONFIG_CPU_IXP43X=y CONFIG_MACH_GTWX5715=y @@ -770,7 +771,7 @@ CONFIG_ATA=y # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set +CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set @@ -1143,7 +1144,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set +CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set @@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y # # LED drivers # -# CONFIG_LEDS_IXP4XX is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_FSG=y # # LED Triggers @@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set +CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_X1205=y CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index e774447c0592..db8b5fe06c0d 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -125,6 +125,15 @@ config ARCH_IXDP4XX depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 default y +config MACH_FSG + bool + prompt "Freecom FSG-3" + select PCI + help + Say 'Y' here if you want your kernel to support Freecom's + FSG-3 device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/FSG3/HomePage + # # Certain registers and IRQs are only enabled if supporting IXP465 CPUs # diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index c1956882c48b..2e6bbf927a74 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o +obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-y += common.o @@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o +obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c new file mode 100644 index 000000000000..f19f3f6feda1 --- /dev/null +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -0,0 +1,71 @@ +/* + * arch/arch/mach-ixp4xx/fsg-pci.c + * + * FSG board-level PCI initialization + * + * Author: Rod Whitby + * Maintainer: http://www.nslu2-linux.org/ + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include + +void __init fsg_pci_preinit(void) +{ + set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[FSG_PCI_IRQ_LINES] = { + IRQ_FSG_PCI_INTC, + IRQ_FSG_PCI_INTB, + IRQ_FSG_PCI_INTA, + }; + + int irq = -1; + slot = slot - 11; + + if (slot >= 1 && slot <= FSG_PCI_MAX_DEV && + pin >= 1 && pin <= FSG_PCI_IRQ_LINES) + irq = pci_irq_table[(slot - 1)]; + printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", + __func__, slot, pin, irq); + + return irq; +} + +struct hw_pci fsg_pci __initdata = { + .nr_controllers = 1, + .preinit = fsg_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = fsg_map_irq, +}; + +int __init fsg_pci_init(void) +{ + if (machine_is_fsg()) + pci_common_init(&fsg_pci); + return 0; +} + +subsys_initcall(fsg_pci_init); diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c new file mode 100644 index 000000000000..0db3a909ae61 --- /dev/null +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -0,0 +1,276 @@ +/* + * arch/arm/mach-ixp4xx/fsg-setup.c + * + * FSG board-setup + * + * Copyright (C) 2008 Rod Whitby + * + * based on ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c + * Copyright (C) 2005 Tower Technologies + * + * Author: Rod Whitby + * Maintainers: http://www.nslu2-linux.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static struct flash_platform_data fsg_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource fsg_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device fsg_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &fsg_flash_data, + }, + .num_resources = 1, + .resource = &fsg_flash_resource, +}; + +static struct i2c_gpio_platform_data fsg_i2c_gpio_data = { + .sda_pin = FSG_SDA_PIN, + .scl_pin = FSG_SCL_PIN, +}; + +static struct platform_device fsg_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &fsg_i2c_gpio_data, + }, +}; + +static struct i2c_board_info __initdata fsg_i2c_board_info [] = { + { + I2C_BOARD_INFO("rtc-isl1208", 0x6f), + }, +}; + +static struct resource fsg_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port fsg_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device fsg_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = fsg_uart_data, + }, + .num_resources = ARRAY_SIZE(fsg_uart_resources), + .resource = fsg_uart_resources, +}; + +static struct platform_device fsg_leds = { + .name = "fsg-led", + .id = -1, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info fsg_plat_eth[] = { + { + .phy = 5, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 4, + .rxq = 4, + .txreadyq = 21, + } +}; + +static struct platform_device fsg_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev = { + .platform_data = fsg_plat_eth, + }, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev = { + .platform_data = fsg_plat_eth + 1, + }, + } +}; + +static struct platform_device *fsg_devices[] __initdata = { + &fsg_i2c_gpio, + &fsg_flash, + &fsg_leds, + &fsg_eth[0], + &fsg_eth[1], +}; + +static irqreturn_t fsg_power_handler(int irq, void *dev_id) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t fsg_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset which does an emergency reboot. */ + printk(KERN_INFO "Restarting system.\n"); + machine_restart(NULL); + + /* This should never be reached. */ + return IRQ_HANDLED; +} + +static void __init fsg_init(void) +{ + DECLARE_MAC_BUF(mac_buf); + uint8_t __iomem *f; + int i; + + ixp4xx_sys_init(); + + fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + fsg_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* Configure CS2 for operation, 8bit and writable */ + *IXP4XX_EXP_CS2 = 0xbfff0002; + + i2c_register_board_info(0, fsg_i2c_board_info, + ARRAY_SIZE(fsg_i2c_board_info)); + + /* This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ + (void)platform_device_register(&fsg_uart); + + platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); + + if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "FSG reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(FSG_RB_GPIO)); + } + + if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "FSG power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + gpio_to_irq(FSG_SB_GPIO)); + } + + /* + * Map in a portion of the flash and read the MAC addresses. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000); + if (f) { +#ifdef __ARMEB__ + for (i = 0; i < 6; i++) { + fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i); + fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i); + } +#else + + /* + Endian-swapped reads from unaligned addresses are + required to extract the two MACs from the big-endian + Redboot config area in flash. + */ + + fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421); + fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420); + fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427); + fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426); + fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425); + fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424); + + fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439); + fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F); + fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E); + fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D); + fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C); + fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443); +#endif + iounmap(f); + } + printk(KERN_INFO "FSG: Using MAC address %s for port 0\n", + print_mac(mac_buf, fsg_plat_eth[0].hwaddr)); + printk(KERN_INFO "FSG: Using MAC address %s for port 1\n", + print_mac(mac_buf, fsg_plat_eth[1].hwaddr)); + +} + +MACHINE_START(FSG, "Freecom FSG-3") + /* Maintainer: www.nslu2-linux.org */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = fsg_init, +MACHINE_END + -- cgit v1.2.1 From e055d5bff318845f99c0fbf93245767fab8dce88 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 22 Apr 2008 01:43:27 +0100 Subject: [ARM] 5015/1: arm: remove ARCH_CO285 Trying to compile a kerel for ARCH_CO285 fails with the following error: <-- snip --> ... CC arch/arm/mach-footbridge/dc21285.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c: In function 'dc21285_base_address': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: 'PCICFG0_BASE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:57: error: 'PCICFG1_BASE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c: In function 'dc21285_scan_bus': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:286: error: implicit declaration of function 'pci_scan_bus' ... make[2]: *** [arch/arm/mach-footbridge/dc21285.o] Error 1 <-- snip --> This does not seem to be a recent breakage. The ARCH_CO285 support is old - kernel 2.2.0 contains first traces of it, an it seems to have been pretty complete in later 2.2 kernels. Since it seems to be completely dead code now this patch therefore removes it. Signed-off-by: Adrian Bunk Signed-off-by: Russell King --- arch/arm/Kconfig | 10 +-------- arch/arm/Makefile | 2 -- arch/arm/mach-footbridge/Makefile | 2 -- arch/arm/mach-footbridge/co285.c | 39 --------------------------------- arch/arm/mach-footbridge/common.c | 21 ------------------ arch/arm/mach-footbridge/ebsa285-leds.c | 2 +- arch/arm/mach-footbridge/time.c | 3 +-- 7 files changed, 3 insertions(+), 76 deletions(-) delete mode 100644 arch/arm/mach-footbridge/co285.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4039a133006e..ab78d5c421fd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -232,14 +232,6 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. -config ARCH_CO285 - bool "Co-EBSA285" - select FOOTBRIDGE - select FOOTBRIDGE_ADDIN - select HAVE_IDE - help - Support for Intel's EBSA285 companion chip. - config ARCH_EBSA110 bool "EBSA-110" select ISA @@ -784,7 +776,7 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" - depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ + depends on ARCH_CDB89712 || ARCH_EBSA110 || \ ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1a4649667ec8..79b8ca3400e0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -100,8 +100,6 @@ textofs-y := 0x00008000 incdir-$(CONFIG_ARCH_CLPS7500) := cl7500 machine-$(CONFIG_FOOTBRIDGE) := footbridge incdir-$(CONFIG_FOOTBRIDGE) := ebsa285 - machine-$(CONFIG_ARCH_CO285) := footbridge - incdir-$(CONFIG_ARCH_CO285) := ebsa285 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SA1100) := sa1100 ifeq ($(CONFIG_ARCH_SA1100),y) diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 0694ad6b6476..32f8609e4f85 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -14,12 +14,10 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o -leds-$(CONFIG_ARCH_CO285) += ebsa285-leds.o leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o -obj-$(CONFIG_ARCH_CO285) += co285.o dc21285-timer.o obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c deleted file mode 100644 index 4545576ad8d9..000000000000 --- a/arch/arm/mach-footbridge/co285.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/arch/arm/mach-footbridge/co285.c - * - * CO285 machine fixup - */ -#include - -#include -#include - -#include - -#include "common.h" - -static void __init -fixup_coebsa285(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) -{ - extern unsigned long boot_memory_end; - extern char boot_command_line[]; - - mi->nr_banks = 1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = boot_memory_end; - mi->bank[0].node = 0; - - *cmdline = boot_command_line; -} - -MACHINE_START(CO285, "co-EBSA285") - /* Maintainer: Mark van Doesburg */ - .phys_io = DC21285_ARMCSR_BASE, - .io_pg_offst = ((0x7cf00000) >> 18) & 0xfffc, - .fixup = fixup_coebsa285, - .map_io = footbridge_map_io, - .init_irq = footbridge_init_irq, - .timer = &footbridge_timer, -MACHINE_END - diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index ef29fc34ce65..b08ab507c052 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -177,25 +177,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { #endif }; -/* - * The CO-ebsa285 mapping. - */ -static struct map_desc co285_io_desc[] __initdata = { -#ifdef CONFIG_ARCH_CO285 - { - .virtual = PCIO_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_IO), - .length = PCIO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = PCIMEM_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_MEM), - .length = PCIMEM_SIZE, - .type = MT_DEVICE, - }, -#endif -}; - void __init footbridge_map_io(void) { /* @@ -208,8 +189,6 @@ void __init footbridge_map_io(void) * Now, work out what we've got to map in addition on this * platform. */ - if (machine_is_co285()) - iotable_init(co285_io_desc, ARRAY_SIZE(co285_io_desc)); if (footbridge_cfn_mode()) iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); } diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c index a64e22226515..09c1fbc51876 100644 --- a/arch/arm/mach-footbridge/ebsa285-leds.c +++ b/arch/arm/mach-footbridge/ebsa285-leds.c @@ -128,7 +128,7 @@ static void ebsa285_leds_event(led_event_t evt) static int __init leds_init(void) { - if (machine_is_ebsa285() || machine_is_co285()) + if (machine_is_ebsa285()) leds_event = ebsa285_leds_event; leds_event(led_start); diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c index 5d02e95dede3..d5cfcda385d6 100644 --- a/arch/arm/mach-footbridge/time.c +++ b/arch/arm/mach-footbridge/time.c @@ -115,8 +115,7 @@ static int set_isa_cmos_time(void) void __init isa_rtc_init(void) { - if (machine_is_co285() || - machine_is_personal_server()) + if (machine_is_personal_server()) /* * Add-in 21285s shouldn't access the RTC */ -- cgit v1.2.1 From 205bee6ad804d7034773b5978c74dde495df2301 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 13:57:26 +0100 Subject: [ARM] dyntick: Remove obsolete and unused ARM dyntick support dyntick is superseded by the clocksource/clockevent infrastructure, using the NO_HZ configuration option. No one implements dyntick on ARM anymore, so it's pointless keeping it around. Remove dyntick support. Signed-off-by: Russell King --- arch/arm/Kconfig | 21 ------ arch/arm/configs/at91cap9adk_defconfig | 1 - arch/arm/configs/at91rm9200dk_defconfig | 1 - arch/arm/configs/at91rm9200ek_defconfig | 1 - arch/arm/configs/at91sam9260ek_defconfig | 1 - arch/arm/configs/at91sam9261ek_defconfig | 1 - arch/arm/configs/at91sam9263ek_defconfig | 1 - arch/arm/configs/at91sam9rlek_defconfig | 1 - arch/arm/configs/ateb9200_defconfig | 1 - arch/arm/configs/cm_x270_defconfig | 1 - arch/arm/configs/collie_defconfig | 1 - arch/arm/configs/corgi_defconfig | 1 - arch/arm/configs/ecbat91_defconfig | 1 - arch/arm/configs/em_x270_defconfig | 1 - arch/arm/configs/ep93xx_defconfig | 1 - arch/arm/configs/eseries_pxa_defconfig | 1 - arch/arm/configs/iop13xx_defconfig | 1 - arch/arm/configs/iop32x_defconfig | 1 - arch/arm/configs/iop33x_defconfig | 1 - arch/arm/configs/ixp2000_defconfig | 1 - arch/arm/configs/ixp23xx_defconfig | 1 - arch/arm/configs/kafa_defconfig | 1 - arch/arm/configs/kb9202_defconfig | 1 - arch/arm/configs/ks8695_defconfig | 1 - arch/arm/configs/lpd270_defconfig | 1 - arch/arm/configs/lpd7a404_defconfig | 1 - arch/arm/configs/netx_defconfig | 1 - arch/arm/configs/onearm_defconfig | 1 - arch/arm/configs/picotux200_defconfig | 1 - arch/arm/configs/pnx4008_defconfig | 1 - arch/arm/configs/realview-smp_defconfig | 1 - arch/arm/configs/realview_defconfig | 1 - arch/arm/configs/rpc_defconfig | 1 - arch/arm/configs/s3c2410_defconfig | 1 - arch/arm/configs/sam9_l9260_defconfig | 1 - arch/arm/configs/spitz_defconfig | 1 - arch/arm/configs/tct_hammer_defconfig | 1 - arch/arm/configs/trizeps4_defconfig | 1 - arch/arm/configs/versatile_defconfig | 1 - arch/arm/kernel/process.c | 4 +- arch/arm/kernel/time.c | 120 ------------------------------- arch/arm/mach-omap1/pm.c | 7 -- arch/arm/mach-omap2/pm.c | 7 -- 43 files changed, 1 insertion(+), 196 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68914d4..167824e24edc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -703,27 +703,6 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. -config NO_IDLE_HZ - bool "Dynamic tick timer" - depends on !GENERIC_CLOCKEVENTS - help - Select this option if you want to disable continuous timer ticks - and have them programmed to occur as required. This option saves - power as the system can remain in idle state for longer. - - By default dynamic tick is disabled during the boot, and can be - manually enabled with: - - echo 1 > /sys/devices/system/timer/timer0/dyn_tick - - Alternatively, if you want dynamic tick automatically enabled - during boot, pass "dyntick=enable" via the kernel command string. - - Please note that dynamic tick may affect the accuracy of - timekeeping on some platforms depending on the implementation. - Currently at least OMAP, PXA2xx and SA11x0 platforms are known - to have accurate timekeeping with dynamic tick. - config HZ int default 128 if ARCH_L7200 diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index e32e73648129..b8e73e95598d 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 2dbbbc3d4ac3..868fb7b9530b 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -169,7 +169,6 @@ CONFIG_AT91_CF=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 6e994f7820c6..de43fc675616 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -160,7 +160,6 @@ CONFIG_ISA_DMA_API=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index f659c938473f..2011adfa6758 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -220,7 +220,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 3802e85f7483..4049768962d2 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index 32a0d74e0c89..fa1c5aecb5a8 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index 98e6746d02be..d8ec5f9ca6ec 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -211,7 +211,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index d846a492e5ce..85c80f723d8e 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -171,7 +171,6 @@ CONFIG_AT91_CF=m # Kernel Features # CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig index 5cab08397ae7..33b201c3b309 100644 --- a/arch/arm/configs/cm_x270_defconfig +++ b/arch/arm/configs/cm_x270_defconfig @@ -194,7 +194,6 @@ CONFIG_PCI_HOST_ITE8152=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 4264e273202d..f7622e658163 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -166,7 +166,6 @@ CONFIG_PCMCIA_SA1100=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index e8980a9bb893..9b8748a8d9dd 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -165,7 +165,6 @@ CONFIG_PCMCIA_PXA2XX=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig index 90ed214e3673..cfeb817ad21a 100644 --- a/arch/arm/configs/ecbat91_defconfig +++ b/arch/arm/configs/ecbat91_defconfig @@ -230,7 +230,6 @@ CONFIG_AT91_CF=y # # CONFIG_TICK_ONESHOT is not set CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 6bea0901bdf0..d3114c23603b 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -197,7 +197,6 @@ CONFIG_XSCALE_PMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 24a701ab33e5..21aa013793c6 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -184,7 +184,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index ed487b90dbed..493ecee24f94 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -251,7 +251,6 @@ CONFIG_PCMCIA_PXA2XX=m # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 988b4d13e76f..482e57061053 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 83f40d4041a6..8612f58e1056 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -201,7 +201,6 @@ CONFIG_PCI_LEGACY=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 917afb5ccfac..8b0098d19d08 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index f8f9793b526f..84680db6c615 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -184,7 +184,6 @@ CONFIG_PCI=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 27cf022dd807..4a2f7b2372db 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -180,7 +180,6 @@ CONFIG_PCI=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index ae51a40db6f9..6dd95a2c8d5d 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -162,7 +162,6 @@ CONFIG_CPU_TLB_V4WBI=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index c16537d9d67a..8e74c66f239d 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig index 8ab21a0719e9..6077f2cb88e4 100644 --- a/arch/arm/configs/ks8695_defconfig +++ b/arch/arm/configs/ks8695_defconfig @@ -174,7 +174,6 @@ CONFIG_PCCARD_NONSTATIC=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index a3bf5833b87a..1a38d8e3fe66 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -173,7 +173,6 @@ CONFIG_XSCALE_PMU=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig index 46a0f7fe1fa5..7a2e932da1c6 100644 --- a/arch/arm/configs/lpd7a404_defconfig +++ b/arch/arm/configs/lpd7a404_defconfig @@ -148,7 +148,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set # CONFIG_AEABI is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 57f32f39d0ff..0884f2370c3a 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -154,7 +154,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 650a248613e5..418ca2febbe3 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -202,7 +202,6 @@ CONFIG_AT91_CF=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 95a22f512805..14826f0dabde 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -201,7 +201,6 @@ CONFIG_ARM_THUMB=y # Kernel Features # # CONFIG_PREEMPT is not set -CONFIG_NO_IDLE_HZ=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index b5e11aa2e290..811b8f60d19d 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -151,7 +151,6 @@ CONFIG_ARM_THUMB=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index fc39ba1a89f3..0c09b23167ec 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -177,7 +177,6 @@ CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y CONFIG_LOCAL_TIMERS=y # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index accbf529ce5b..907e54344dad 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 5ddecb9ddf01..f62d1817d2c6 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -190,7 +190,6 @@ CONFIG_ISA_DMA_API=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f8a1645b3d4a..6d03763773bf 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -246,7 +246,6 @@ CONFIG_ISA=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=200 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 484dc9739dfc..8688362bcf7b 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -211,7 +211,6 @@ CONFIG_ARM_THUMB=y # # CONFIG_TICK_ONESHOT is not set CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index aa7a01179500..7d59fb1f1cea 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -164,7 +164,6 @@ CONFIG_PCMCIA_PXA2XX=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 576b8339f0d6..07dfb98df4f0 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -247,7 +247,6 @@ CONFIG_ARM_THUMB=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=200 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 6db6392806f9..8b7a431a8bfc 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -195,7 +195,6 @@ CONFIG_PCMCIA_PXA2XX=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 48dca69addae..8355f88f7292 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -151,7 +151,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 46bf2ede6128..199b3680118b 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -133,10 +133,8 @@ static void default_idle(void) cpu_relax(); else { local_irq_disable(); - if (!need_resched()) { - timer_dyn_reprogram(); + if (!need_resched()) arch_idle(); - } local_irq_enable(); } } diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index b5867eca1d0b..cc5145b28e7f 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -365,108 +365,6 @@ static struct sysdev_class timer_sysclass = { .resume = timer_resume, }; -#ifdef CONFIG_NO_IDLE_HZ -static int timer_dyn_tick_enable(void) -{ - struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long flags; - int ret = -ENODEV; - - if (dyn_tick) { - spin_lock_irqsave(&dyn_tick->lock, flags); - ret = 0; - if (!(dyn_tick->state & DYN_TICK_ENABLED)) { - ret = dyn_tick->enable(); - - if (ret == 0) - dyn_tick->state |= DYN_TICK_ENABLED; - } - spin_unlock_irqrestore(&dyn_tick->lock, flags); - } - - return ret; -} - -static int timer_dyn_tick_disable(void) -{ - struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long flags; - int ret = -ENODEV; - - if (dyn_tick) { - spin_lock_irqsave(&dyn_tick->lock, flags); - ret = 0; - if (dyn_tick->state & DYN_TICK_ENABLED) { - ret = dyn_tick->disable(); - - if (ret == 0) - dyn_tick->state &= ~DYN_TICK_ENABLED; - } - spin_unlock_irqrestore(&dyn_tick->lock, flags); - } - - return ret; -} - -/* - * Reprogram the system timer for at least the calculated time interval. - * This function should be called from the idle thread with IRQs disabled, - * immediately before sleeping. - */ -void timer_dyn_reprogram(void) -{ - struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long next, seq, flags; - - if (!dyn_tick) - return; - - spin_lock_irqsave(&dyn_tick->lock, flags); - if (dyn_tick->state & DYN_TICK_ENABLED) { - next = next_timer_interrupt(); - do { - seq = read_seqbegin(&xtime_lock); - dyn_tick->reprogram(next - jiffies); - } while (read_seqretry(&xtime_lock, seq)); - } - spin_unlock_irqrestore(&dyn_tick->lock, flags); -} - -static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) -{ - return sprintf(buf, "%i\n", - (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1); -} - -static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf, - size_t count) -{ - unsigned int enable = simple_strtoul(buf, NULL, 2); - - if (enable) - timer_dyn_tick_enable(); - else - timer_dyn_tick_disable(); - - return count; -} -static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick); - -/* - * dyntick=enable|disable - */ -static char dyntick_str[4] __initdata = ""; - -static int __init dyntick_setup(char *str) -{ - if (str) - strlcpy(dyntick_str, str, sizeof(dyntick_str)); - return 1; -} - -__setup("dyntick=", dyntick_setup); -#endif - static int __init timer_init_sysfs(void) { int ret = sysdev_class_register(&timer_sysclass); @@ -475,19 +373,6 @@ static int __init timer_init_sysfs(void) ret = sysdev_register(&system_timer->dev); } -#ifdef CONFIG_NO_IDLE_HZ - if (ret == 0 && system_timer->dyn_tick) { - ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick); - - /* - * Turn on dynamic tick after calibrate delay - * for correct bogomips - */ - if (ret == 0 && dyntick_str[0] == 'e') - ret = timer_dyn_tick_enable(); - } -#endif - return ret; } @@ -500,10 +385,5 @@ void __init time_init(void) system_timer->offset = dummy_gettimeoffset; #endif system_timer->init(); - -#ifdef CONFIG_NO_IDLE_HZ - if (system_timer->dyn_tick) - spin_lock_init(&system_timer->dyn_tick->lock); -#endif } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index e6c64e10b7ec..742f79e73bd7 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -116,13 +116,6 @@ void omap_pm_idle(void) return; } - /* - * Since an interrupt may set up a timer, we don't want to - * reprogram the hardware timer with interrupts enabled. - * Re-enable interrupts only after returning from idle. - */ - timer_dyn_reprogram(); - #ifdef CONFIG_OMAP_MPU_TIMER #warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index aad781dcf1b1..d6c9de82ca0c 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -57,13 +57,6 @@ void omap2_pm_idle(void) return; } - /* - * Since an interrupt may set up a timer, we don't want to - * reprogram the hardware timer with interrupts enabled. - * Re-enable interrupts only after returning from idle. - */ - timer_dyn_reprogram(); - omap2_sram_idle(); local_fiq_enable(); local_irq_enable(); -- cgit v1.2.1 From 150c9173031d43746d70582a17931350f3da8932 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 12 May 2008 17:37:21 +0100 Subject: dyntick: remove deferences from SH SH does not have a configuration option for NO_IDLE_HZ their Kconfig files, yet their defconfig files lists them. Remove those references. Signed-off-by: Russell King --- arch/sh/configs/landisk_defconfig | 1 - arch/sh/configs/lboxre2_defconfig | 1 - arch/sh/configs/se7705_defconfig | 1 - arch/sh/configs/se7712_defconfig | 1 - arch/sh/configs/se7750_defconfig | 1 - 5 files changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index f52db125432f..38f934ab50c7 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -226,7 +226,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index 9fa66d92a4e7..b68b6cdbb78f 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -231,7 +231,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=40000000 # diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index 84717d854867..490dcbc2ce33 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -239,7 +239,6 @@ CONFIG_CPU_HAS_SR_RB=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 240a1cef69aa..2dd83af988f0 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -236,7 +236,6 @@ CONFIG_CPU_HAS_SR_RB=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=66666666 # diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index c60b6fd4fc42..167786f9a9bd 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -235,7 +235,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # -- cgit v1.2.1 From 6fd592daae2182adc47f405e20d07f34f52d07dd Mon Sep 17 00:00:00 2001 From: "Carlos R. Mafra" Date: Mon, 5 May 2008 20:11:22 -0300 Subject: x86: clean up computation of HPET .mult variables While reading through the HPET code I realized that the computation of .mult variables could be done with less lines of code, resulting in a 1.6% text size saving for hpet.o So I propose the following patch, which applies against today's Linus -git tree. >From 0c6507e400e9ca5f7f14331e18f8c12baf75a9d3 Mon Sep 17 00:00:00 2001 From: Carlos R. Mafra Date: Mon, 5 May 2008 19:38:53 -0300 The computation of clocksource_hpet.mult tmp = (u64)hpet_period << HPET_SHIFT; do_div(tmp, FSEC_PER_NSEC); clocksource_hpet.mult = (u32)tmp; can be streamlined if we note that it is equal to clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); Furthermore, the computation of hpet_clockevent.mult uint64_t hpet_freq; hpet_freq = 1000000000000000ULL; do_div(hpet_freq, hpet_period); hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, NSEC_PER_SEC, hpet_clockevent.shift); can also be streamlined with the observation that hpet_period and hpet_freq are inverse to each other (in proper units). So instead of computing hpet_freq and using (schematically) div_sc(hpet_freq, 10^9, shift) we use the trick of calling with the arguments in reverse order, div_sc(10^6, hpet_period, shift). The different power of ten is due to frequency being in Hertz (1/sec) and the period being in units of femtosecond. Explicitly, mult = (hpet_freq * 2^shift)/10^9 (before) mult = (10^6 * 2^shift)/hpet_period (after) because hpet_freq = 10^15/hpet_period. The comments in the code are also updated to reflect the changes. As a result, text data bss dec hex filename 2957 425 92 3474 d92 arch/x86/kernel/hpet.o 3006 425 92 3523 dc3 arch/x86/kernel/hpet.o.old a 1.6% reduction in text size. Signed-off-by: Carlos R. Mafra Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 43 ++++++++++++++++++------------------------- 1 file changed, 18 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcdfc426..ea230ec69057 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -206,20 +206,19 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); @@ -324,7 +323,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +350,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); -- cgit v1.2.1 From e8aa4667baf74dfd85fbaab86861465acb811085 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 9 May 2008 11:49:11 +0200 Subject: x86: enable hpet=force for AMD SB400 Add quirk to allow forced usage of HPET on ATI SB400. I stumbled over machines where HPET is enabled but not reported by BIOS. This patch configures the HPET base address and makes it known to the OS. Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648fe710..5fe6bd5cc4c7 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -65,6 +65,7 @@ static enum { ICH_FORCE_HPET_RESUME, VT8237_FORCE_HPET_RESUME, NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, } force_hpet_resume_type; static void __iomem *rcba_base; @@ -330,6 +331,31 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, vt8237_force_enable_hpet); +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (!hpet_force_user || hpet_address || force_hpet_address) + return; + + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + /* * Undocumented chipset feature taken from LinuxBIOS. */ @@ -397,6 +423,9 @@ void force_hpet_resume(void) case NVIDIA_FORCE_HPET_RESUME: nvidia_force_hpet_resume(); return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; default: break; } -- cgit v1.2.1 From 7c4728f4a865067d96fb84f1d9c65e0ccd1f355d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 10 May 2008 21:42:14 +0200 Subject: x86: print info about available HPET quirk We have a lot of HPET quirks available which might force enable HPET even when the BIOS does not enable it. Some of those quirks depend on the command line option "hpet=force". Andrew pointed out that hoping that the user will find out about this boot option is not really helpful. Emit a kernel info which informs the user about the "hpet=force" boot option when we enter a quirk which depends on this option and the user did not provide it. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 5fe6bd5cc4c7..ddbf34d16a01 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -175,6 +175,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, static struct pci_dev *cached_dev; +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + static void old_ich_force_hpet_resume(void) { u32 val; @@ -254,6 +260,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); + else + hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -291,8 +299,13 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_read_config_dword(dev, 0x68, &val); /* @@ -341,8 +354,13 @@ static void ati_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x14, 0xfed00000); pci_read_config_dword(dev, 0x14, &val); @@ -369,8 +387,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x44, 0xfed00001); pci_read_config_dword(dev, 0x44, &val); -- cgit v1.2.1 From 8edc5cc5ec880c96de8e6686fb0d7a5231e91c05 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 12 May 2008 15:43:34 +0200 Subject: x86: remove 6 bank limitation in 64 bit MCE reporting code Eliminate the 6 bank restriction in 64 bit mce reporting code. This restriction is artificial (due to static creation of sysfs files) and 32 bit code does not have any such restriction. This change helps in reporting the details of machine checks on a machine check exception with errors in bank 6 and above on CPUs that support those banks. Without the patch, machine check errors in those banks are not reported. We still have 128 (MCE_EXTENDED_BANK) bank restriction instead of max 256 supported in hardware. That is not changed in the patch below as it will have some user level mcelog utility dependency, with bank 128 being used for thermal reporting currently. The patch below does not create sysfs control (bankNctl) for banks higher than 6 as well. That needs some pre-cleanup in /sysfs mce layout, removal of per cpu /sysfs entries for bankctl as they are really global system level control today. That change will follow. This basic change is critical to report the detailed errors on banks higher than 6. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce_64.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index e07e8c068ae0..f1f3f5e163b7 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -31,7 +31,7 @@ #include #define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 +#define NR_SYSFS_BANKS 6 atomic_t mce_entry; @@ -46,7 +46,7 @@ static int mce_dont_init; */ static int tolerant = 1; static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL }; static unsigned long notify_user; static int rip_msr; static int mce_bootlog = -1; @@ -209,7 +209,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) barrier(); for (i = 0; i < banks; i++) { - if (!bank[i]) + if (i < NR_SYSFS_BANKS && !bank[i]) continue; m.misc = 0; @@ -444,9 +444,10 @@ static void mce_init(void *dummy) rdmsrl(MSR_IA32_MCG_CAP, cap); banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; + if (banks > MCE_EXTENDED_BANK) { + printk(KERN_INFO "MCE: warning: using only %d banks\n", + MCE_EXTENDED_BANK); + banks = MCE_EXTENDED_BANK; } /* Use accurate RIP reporting if available. */ if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) @@ -462,7 +463,7 @@ static void mce_init(void *dummy) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL); wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); } } @@ -766,7 +767,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); -/* TBD should generate these dynamically based on number of available banks */ +/* + * TBD should generate these dynamically based on number of available banks. + * Have only 6 contol banks in /sysfs until then. + */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) -- cgit v1.2.1 From 41b3eae669fb1ef6ae4acaa937b4e4617a1aa078 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 22 Apr 2008 16:29:26 +0100 Subject: x86: minor polishing to top-level arch Makefile Use build target when creating compatibility link, and use $(boot) where possible. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar --- arch/x86/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 3cff3c894cf3..5df0d1e330b1 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -210,12 +210,12 @@ all: bzImage # KBUILD_IMAGE specify target image being built KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage +zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage zImage bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@ compressed: zImage -- cgit v1.2.1 From 9b7dc567d03d74a1fbae84e88949b6a60d922d82 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 20:10:09 +0200 Subject: x86: unify interrupt vector defines The interrupt vector defines are copied 4 times around with minimal differences. Move them all into asm-x86/irq_vectors.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_32.S | 2 +- arch/x86/kernel/vmiclock_32.c | 3 +-- arch/x86/mach-visws/visws_apic.c | 3 +-- 3 files changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc3271c..0c7f64b99e17 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -51,7 +51,7 @@ #include #include #include -#include "irq_vectors.h" +#include /* * We use macros for low-level operations which need to be overridden diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index a2b030780aa9..ba7d19e102b1 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -33,8 +33,7 @@ #include #include #include - -#include +#include #define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) #define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c index cef9cb1d15ac..d8b2cfd85d92 100644 --- a/arch/x86/mach-visws/visws_apic.c +++ b/arch/x86/mach-visws/visws_apic.c @@ -21,10 +21,9 @@ #include #include #include +#include #include "cobalt.h" -#include "irq_vectors.h" - static DEFINE_SPINLOCK(cobalt_lock); -- cgit v1.2.1 From 0bc471d93051a19545257909bc2ed2ad3b389b54 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 21:55:12 +0200 Subject: x86: move BUILD_IRQ macro magic to i8259_64.c i8259_64.c is the only place which uses those macros. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259_64.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index fa57a1568508..c4ae4769ce67 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -34,6 +34,20 @@ * interrupt-controller happy. */ +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +/* + * SMP has a few special interrupts for IPI messages + */ + +#define BUILD_IRQ(nr) \ + asmlinkage void IRQ_NAME(nr); \ + asm("\n.p2align\n" \ + "IRQ" #nr "_interrupt:\n\t" \ + "push $~(" #nr ") ; " \ + "jmp common_interrupt"); + #define BI(x,y) \ BUILD_IRQ(x##y) -- cgit v1.2.1 From 1a331957efd214fc3a84f70956dfaec65e70c031 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 3 May 2008 00:30:50 +0200 Subject: x86: move eisa_set_level_irq declaration to header Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc6c41e..671591fcc61d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -507,8 +507,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - extern void eisa_set_level_irq(unsigned int irq); - if (triggering == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } -- cgit v1.2.1 From 305b92a2323eeaa4b481f409d54f778dd7e21a46 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Tue, 15 Apr 2008 15:36:56 -0500 Subject: x86: change FIRST_SYSTEM_VECTOR to a variable The SGI UV system needs several more system vectors than a vanilla x86_64 system. Rather than burden the other archs with extra system vectors that they don't use, change FIRST_SYSTEM_VECTOR to a variable, so that it can be dynamic. Signed-off-by: Alan Mayer Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic_32.c | 14 +++++++------- arch/x86/kernel/i8259_64.c | 30 +++++++++++++++--------------- arch/x86/kernel/io_apic_32.c | 8 ++++++-- arch/x86/kernel/io_apic_64.c | 6 +++++- 4 files changed, 33 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..807158e4b5d0 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1351,13 +1351,13 @@ void __init smp_intr_init(void) * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPI for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); } #endif @@ -1370,15 +1370,15 @@ void __init apic_intr_init(void) smp_intr_init(); #endif /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); /* thermal monitor LVT interrupt */ #ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif } diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index c4ae4769ce67..1870e0e86559 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -493,33 +493,33 @@ void __init native_init_IRQ(void) * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); /* Low priority IPI to cleanup after moving an irq */ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); #endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); if (!acpi_ioapic) setup_irq(2, &irq2); diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..0ae4a9d00ce8 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -83,6 +83,10 @@ int mp_irq_entries; static int disable_timer_pin_1 __initdata; +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. @@ -1176,7 +1180,7 @@ static int __assign_irq_vector(int irq) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; } @@ -2269,7 +2273,7 @@ void __init setup_IO_APIC(void) int i; /* Reserve all the system vectors. */ - for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++) + for (i = first_system_vector; i < NR_VECTORS; i++) set_bit(i, used_vectors); enable_IO_APIC(); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..f1e1ae3e5c7d 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -82,6 +82,10 @@ struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { static int assign_irq_vector(int irq, cpumask_t mask); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + #define __apicdebuginit __init int sis_apic_bug; /* not actually supported, dummy for compile */ @@ -730,7 +734,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { /* If we run out of vectors on large boxen, must share them. */ offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; -- cgit v1.2.1 From ce17833183bf0a08ce3d174a2088eff0a06f2080 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Wed, 16 Apr 2008 15:17:20 -0500 Subject: x86: change FIRST_SYSTEM_VECTOR to a variable, fix Fixes the build error introduced by my FIRST_SYSTEM_VECTOR patch Signed-off-by: Alan Mayer Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic_32.c | 4 ++++ arch/x86/kernel/io_apic_32.c | 4 ---- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 807158e4b5d0..d5767cb19d56 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -71,6 +71,10 @@ int local_apic_timer_disabled; int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Debug level, exported for io_apic.c */ diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 0ae4a9d00ce8..76769ccb1425 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -83,10 +83,6 @@ int mp_irq_entries; static int disable_timer_pin_1 __initdata; -int first_system_vector = 0xfe; - -char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; - /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. -- cgit v1.2.1 From 04b361abfdc522239e3a071f3afdebf5787d9f03 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 5 May 2008 12:36:38 +0200 Subject: i386: Execute stack overflow warning on interrupt stack v2 Previously the reporting printk would run on the process stack, which risks overflow an already low stack. Instead execute it on the interrupt stack. This makes it more likely for the printk to make it actually out. It adds one not taken test/branch more to the interrupt path when stack overflow checking is enabled. We could avoid that by duplicating more code, but that seemed not worth it. Based on an observation by Eric Sandeen. v2: Fix warnings in some configs Signed-off-by: Andi Kleen Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 49 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 33 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b9..3f76561da815 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -61,6 +61,26 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif +static void stack_overflow(void) +{ + printk("low stack detected by irq handler\n"); + dump_stack(); +} + +static inline void call_on_stack2(void *func, void *stack, + unsigned long arg1, unsigned long arg2) +{ + unsigned long bx; + asm volatile( + " xchgl %%ebx,%%esp \n" + " call *%%edi \n" + " movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (bx) + : "0" (arg1), "1" (arg2), "2" (stack), + "D" (func) + : "memory", "cc", "ecx"); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific @@ -76,6 +96,7 @@ unsigned int do_IRQ(struct pt_regs *regs) union irq_ctx *curctx, *irqctx; u32 *isp; #endif + int overflow = 0; if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", @@ -92,11 +113,8 @@ unsigned int do_IRQ(struct pt_regs *regs) __asm__ __volatile__("andl %%esp,%0" : "=r" (sp) : "0" (THREAD_SIZE - 1)); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) + overflow = 1; } #endif @@ -112,8 +130,6 @@ unsigned int do_IRQ(struct pt_regs *regs) * current stack (which is the irq stack already after all) */ if (curctx != irqctx) { - int arg1, arg2, bx; - /* build the stack frame on the IRQ stack */ isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); irqctx->tinfo.task = curctx->tinfo.task; @@ -127,18 +143,19 @@ unsigned int do_IRQ(struct pt_regs *regs) (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (bx) - : "0" (irq), "1" (desc), "2" (isp), - "D" (desc->handle_irq) - : "memory", "cc", "ecx" - ); + /* Execute warning on interrupt stack */ + if (unlikely(overflow)) + call_on_stack2(stack_overflow, isp, 0, 0); + + call_on_stack2(desc->handle_irq, isp, irq, (unsigned long)desc); } else #endif + { + /* AK: Slightly bogus here */ + if (overflow) + stack_overflow(); desc->handle_irq(irq, desc); + } irq_exit(); set_irq_regs(old_regs); -- cgit v1.2.1 From de9b10af1287bf25b9c0433de53a2e95ef611aa7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 May 2008 15:58:15 +0200 Subject: x86: janitor stack overflow warning patch Add KERN_WARNING to the printk as this could not be done in the original patch, which allegedly only moves code around. Un#ifdef do_IRQ. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 136 ++++++++++++++++++++++++++--------------------- 1 file changed, 75 insertions(+), 61 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 3f76561da815..1c470d2e5af7 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -48,6 +48,29 @@ void ack_bad_irq(unsigned int irq) #endif } +#ifdef CONFIG_DEBUG_STACKOVERFLOW +/* Debugging check for stack overflow: is there less than 1KB free? */ +static int check_stack_overflow(void) +{ + long sp; + + __asm__ __volatile__("andl %%esp,%0" : + "=r" (sp) : "0" (THREAD_SIZE - 1)); + + return sp < (sizeof(struct thread_info) + STACK_WARN); +} + +static void print_stack_overflow(void) +{ + printk(KERN_WARNING "low stack detected by irq handler\n"); + dump_stack(); +} + +#else +static inline int check_stack_overflow(void) { return 0; } +static inline void print_stack_overflow(void) { } +#endif + #ifdef CONFIG_4KSTACKS /* * per-CPU IRQ handling contexts (thread information and stack) @@ -59,18 +82,12 @@ union irq_ctx { static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -#endif - -static void stack_overflow(void) -{ - printk("low stack detected by irq handler\n"); - dump_stack(); -} -static inline void call_on_stack2(void *func, void *stack, - unsigned long arg1, unsigned long arg2) +static inline void call_on_stack(void *func, void *stack, + unsigned long arg1, void *arg2) { unsigned long bx; + asm volatile( " xchgl %%ebx,%%esp \n" " call *%%edi \n" @@ -81,22 +98,61 @@ static inline void call_on_stack2(void *func, void *stack, : "memory", "cc", "ecx"); } +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) +{ + union irq_ctx *curctx, *irqctx; + u32 *isp; + + curctx = (union irq_ctx *) current_thread_info(); + irqctx = hardirq_ctx[smp_processor_id()]; + + /* + * this is where we switch to the IRQ stack. However, if we are + * already using the IRQ stack (because we interrupted a hardirq + * handler) we can't do that and just have to keep using the + * current stack (which is the irq stack already after all) + */ + if (unlikely(curctx == irqctx)) + return 0; + + /* build the stack frame on the IRQ stack */ + isp = (u32 *) ((char*)irqctx + sizeof(*irqctx)); + irqctx->tinfo.task = curctx->tinfo.task; + irqctx->tinfo.previous_esp = current_stack_pointer; + + /* + * Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqctx->tinfo.preempt_count = + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); + + if (unlikely(overflow)) + call_on_stack(print_stack_overflow, isp, 0, NULL); + + call_on_stack(desc->handle_irq, isp, irq, desc); + + return 1; +} + +#else +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } +#endif + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific * handlers). */ unsigned int do_IRQ(struct pt_regs *regs) -{ +{ struct pt_regs *old_regs; /* high bit used in ret_from_ code */ - int irq = ~regs->orig_ax; + int overflow, irq = ~regs->orig_ax; struct irq_desc *desc = irq_desc + irq; -#ifdef CONFIG_4KSTACKS - union irq_ctx *curctx, *irqctx; - u32 *isp; -#endif - int overflow = 0; if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", @@ -106,54 +162,12 @@ unsigned int do_IRQ(struct pt_regs *regs) old_regs = set_irq_regs(regs); irq_enter(); -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 1KB free? */ - { - long sp; - - __asm__ __volatile__("andl %%esp,%0" : - "=r" (sp) : "0" (THREAD_SIZE - 1)); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) - overflow = 1; - } -#endif - -#ifdef CONFIG_4KSTACKS - curctx = (union irq_ctx *) current_thread_info(); - irqctx = hardirq_ctx[smp_processor_id()]; + overflow = check_stack_overflow(); - /* - * this is where we switch to the IRQ stack. However, if we are - * already using the IRQ stack (because we interrupted a hardirq - * handler) we can't do that and just have to keep using the - * current stack (which is the irq stack already after all) - */ - if (curctx != irqctx) { - /* build the stack frame on the IRQ stack */ - isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - irqctx->tinfo.task = curctx->tinfo.task; - irqctx->tinfo.previous_esp = current_stack_pointer; - - /* - * Copy the softirq bits in preempt_count so that the - * softirq checks work in the hardirq context. - */ - irqctx->tinfo.preempt_count = - (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | - (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - - /* Execute warning on interrupt stack */ + if (!execute_on_irq_stack(overflow, desc, irq)) { if (unlikely(overflow)) - call_on_stack2(stack_overflow, isp, 0, 0); - - call_on_stack2(desc->handle_irq, isp, irq, (unsigned long)desc); - } else -#endif - { - /* AK: Slightly bogus here */ - if (overflow) - stack_overflow(); + print_stack_overflow(); desc->handle_irq(irq, desc); } -- cgit v1.2.1 From 403d8efc94cd02ae36e7db13c4edf1d06d7b7fac Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 May 2008 18:13:50 +0200 Subject: x86: irq_32 move 4kstacks code to one place Move the 4KSTACKS related code to one place. This allows to un#ifdef do_IRQ() and share the executed on stack for the stack overflow printk and the softirq call. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 163 ++++++++++++++++++++++------------------------- 1 file changed, 77 insertions(+), 86 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 1c470d2e5af7..4e3e8ec60276 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -83,26 +83,28 @@ union irq_ctx { static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -static inline void call_on_stack(void *func, void *stack, - unsigned long arg1, void *arg2) +static char softirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); + +static char hardirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); + +static void call_on_stack(void *func, void *stack) { - unsigned long bx; - - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (bx) - : "0" (arg1), "1" (arg2), "2" (stack), - "D" (func) - : "memory", "cc", "ecx"); + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=b" (stack) + : "0" (stack), + "D"(func) + : "memory", "cc", "edx", "ecx", "eax"); } static inline int execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { union irq_ctx *curctx, *irqctx; - u32 *isp; + u32 *isp, arg1, arg2; curctx = (union irq_ctx *) current_thread_info(); irqctx = hardirq_ctx[smp_processor_id()]; @@ -130,64 +132,22 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) (curctx->tinfo.preempt_count & SOFTIRQ_MASK); if (unlikely(overflow)) - call_on_stack(print_stack_overflow, isp, 0, NULL); - - call_on_stack(desc->handle_irq, isp, irq, desc); - - return 1; -} - -#else -static inline int -execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } -#endif - -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - */ -unsigned int do_IRQ(struct pt_regs *regs) -{ - struct pt_regs *old_regs; - /* high bit used in ret_from_ code */ - int overflow, irq = ~regs->orig_ax; - struct irq_desc *desc = irq_desc + irq; - - if (unlikely((unsigned)irq >= NR_IRQS)) { - printk(KERN_EMERG "%s: cannot handle IRQ %d\n", - __func__, irq); - BUG(); - } - - old_regs = set_irq_regs(regs); - irq_enter(); - - overflow = check_stack_overflow(); - - if (!execute_on_irq_stack(overflow, desc, irq)) { - if (unlikely(overflow)) - print_stack_overflow(); - desc->handle_irq(irq, desc); - } - - irq_exit(); - set_irq_regs(old_regs); + call_on_stack(print_stack_overflow, isp); + + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (isp) + : "0" (irq), "1" (desc), "2" (isp), + "D" (desc->handle_irq) + : "memory", "cc", "ecx"); return 1; } -#ifdef CONFIG_4KSTACKS - -static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - -static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - /* * allocate per-cpu stacks for hardirq and for softirq processing */ -void irq_ctx_init(int cpu) +void __cpuinit irq_ctx_init(int cpu) { union irq_ctx *irqctx; @@ -195,25 +155,25 @@ void irq_ctx_init(int cpu) return; irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); hardirq_ctx[cpu] = irqctx; irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = 0; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = 0; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); softirq_ctx[cpu] = irqctx; - printk("CPU %u irqstacks, hard=%p soft=%p\n", - cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); + printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n", + cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); } void irq_ctx_exit(int cpu) @@ -242,24 +202,55 @@ asmlinkage void do_softirq(void) /* build the stack frame on the softirq stack */ isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - asm volatile( - " xchgl %%ebx,%%esp \n" - " call __do_softirq \n" - " movl %%ebx,%%esp \n" - : "=b"(isp) - : "0"(isp) - : "memory", "cc", "edx", "ecx", "eax" - ); + call_on_stack(__do_softirq, isp); /* * Shouldnt happen, we returned above if in_interrupt(): - */ + */ WARN_ON_ONCE(softirq_count()); } local_irq_restore(flags); } + +#else +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } #endif +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +unsigned int do_IRQ(struct pt_regs *regs) +{ + struct pt_regs *old_regs; + /* high bit used in ret_from_ code */ + int overflow, irq = ~regs->orig_ax; + struct irq_desc *desc = irq_desc + irq; + + if (unlikely((unsigned)irq >= NR_IRQS)) { + printk(KERN_EMERG "%s: cannot handle IRQ %d\n", + __func__, irq); + BUG(); + } + + old_regs = set_irq_regs(regs); + irq_enter(); + + overflow = check_stack_overflow(); + + if (!execute_on_irq_stack(overflow, desc, irq)) { + if (unlikely(overflow)) + print_stack_overflow(); + desc->handle_irq(irq, desc); + } + + irq_exit(); + set_irq_regs(old_regs); + return 1; +} + /* * Interrupt statistics: */ -- cgit v1.2.1 From 77b52b4c5c66175553ee59eb43f74366f1e54bde Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 5 May 2008 19:09:10 -0700 Subject: x86: add "debugpat" boot option enable debug messages by a boot option "debugpat". Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/pat.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 60adbe22efa0..1a82f4db8a46 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -42,6 +42,19 @@ static int nopat(char *str) early_param("nopat", nopat); #endif + +static int debug_enable; +static int __init pat_debug_setup(char *str) +{ + debug_enable = 1; + return 0; +} +__setup("debugpat", pat_debug_setup); + +#define dprintk(fmt, arg...) \ + do { if (debug_enable) printk(KERN_INFO fmt, ##arg); } while (0) + + static u64 __read_mostly boot_pat_state; enum { @@ -279,7 +292,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, struct memtype *saved_ptr; if (parse->start >= end) { - pr_debug("New Entry\n"); + dprintk("New Entry\n"); list_add(&new_entry->nd, parse->nd.prev); new_entry = NULL; break; @@ -329,7 +342,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, break; } - pr_debug("Overlap at 0x%Lx-0x%Lx\n", + dprintk("Overlap at 0x%Lx-0x%Lx\n", saved_ptr->start, saved_ptr->end); /* No conflict. Go ahead and add this new entry */ list_add(&new_entry->nd, saved_ptr->nd.prev); @@ -381,7 +394,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, break; } - pr_debug(KERN_INFO "Overlap at 0x%Lx-0x%Lx\n", + dprintk("Overlap at 0x%Lx-0x%Lx\n", saved_ptr->start, saved_ptr->end); /* No conflict. Go ahead and add this new entry */ list_add(&new_entry->nd, &saved_ptr->nd); @@ -403,16 +416,16 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, if (new_entry) { /* No conflict. Not yet added to the list. Add to the tail */ list_add_tail(&new_entry->nd, &memtype_list); - pr_debug("New Entry\n"); + dprintk("New Entry\n"); } if (ret_type) { - pr_debug( + dprintk( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", start, end, cattr_name(actual_type), cattr_name(req_type), cattr_name(*ret_type)); } else { - pr_debug( + dprintk( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n", start, end, cattr_name(actual_type), cattr_name(req_type)); @@ -453,7 +466,7 @@ int free_memtype(u64 start, u64 end) current->comm, current->pid, start, end); } - pr_debug("free_memtype request 0x%Lx-0x%Lx\n", start, end); + dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end); return err; } -- cgit v1.2.1 From f8096f92b87d81c55ed63964d27baa9ce5ffe508 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 22 Apr 2008 16:27:29 +0100 Subject: x86: separate cmpxchg8b checking from PAE checking .. allowing the former to be use in non-PAE kernels, too. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.cpu | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 2ad6301849a1..3d22bb8175b4 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -399,6 +399,10 @@ config X86_TSC def_bool y depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 +config X86_CMPXCHG64 + def_bool y + depends on X86_PAE || X86_64 + # this should be set for all -march=.. options where the compiler # generates cmov. config X86_CMOV -- cgit v1.2.1 From aa134f1b09df6beaa4d031a50d5fda1f3cebce6c Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 8 Apr 2008 10:49:03 +0200 Subject: x86: iommu: use symbolic constants, not hardcoded numbers Move symbolic constants into gart.h, and use them instead of hardcoded constant. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-gart_64.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d1695f..bffcf455c857 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -598,13 +598,13 @@ static __init int init_k8_gatt(struct agp_kern_info *info) dev = k8_northbridges[i]; gatt_reg = __pa(gatt) >> 12; gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, gatt_reg); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); + ctl |= GARTEN; + ctl &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } flush_gart(); -- cgit v1.2.1 From 1edc1ab3f68168ec6815e6d630f38948a6da005a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 13 Apr 2008 01:11:41 -0700 Subject: x86: agp_gart size checking for buggy device while looking at Rafael J. Wysocki's system boot log, I found a funny printout: Node 0: aperture @ de000000 size 32 MB Aperture too small (32 MB) AGP bridge at 00:04:00 Aperture from AGP @ de000000 size 4096 MB (APSIZE 0) Aperture too small (0 MB) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 ... agpgart: Detected AGP bridge 20 agpgart: Aperture pointing to RAM agpgart: Aperture from AGP @ de000000 size 4096 MB agpgart: Aperture too small (0 MB) agpgart: No usable aperture found. agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. it means BIOS allocated the correct gart on the NB and AGP bridge, but because a bug in the silicon (the agp bridge reports the wrong order, it wants 4G instead) the kernel will reject that allocation. Also, because the size is only 32MB, and we try to get another 64M for gart, late fix_northbridge can not revert that change because it still reads the wrong size from agp bridge. So try to double check the order value from the agp bridge, before calling aperture_valid(). [ mingo@elte.hu: 32-bit fix. ] Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d9e004..2e93b3132dff 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -138,6 +138,7 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) int nbits; u32 aper_low, aper_hi; u64 aper; + u32 old_order; printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); @@ -146,6 +147,9 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) return 0; } + /* old_order could be the value from NB gart setting */ + old_order = *order; + apsize = apsizereg & 0xfff; /* Some BIOS use weird encodings not in the AGPv3 table. */ if (apsize & 0xff) @@ -159,6 +163,16 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) aper_hi = read_pci_config(num, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + /* + * On some sick chips, APSIZE is 0. It means it wants 4G + * so let double check that order, and lets trust AMD NB settings: + */ + if (aper + (32UL<<(20 + *order)) > 0x100000000UL) { + printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", + 32 << *order, apsizereg); + *order = old_order; + } + printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); -- cgit v1.2.1 From 8c9fd91a0dc503f085169d44f4360be025f75224 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 13 Apr 2008 18:42:31 -0700 Subject: x86: checking aperture size order some systems are using 32M for gart and agp when memory is less than 4G. Kernel will reject and try to allcate another 64M that is not needed, and we will waste 64M of perfectly good RAM. this patch adds a workaround by checking aper_base/order between NB and agp bridge. If they are the same, and memory size is less than 4G, it will allow it. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 47 ++++++++++++++++++++++++++++++++----------- 1 file changed, 35 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 2e93b3132dff..8c325b7f2d9b 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -83,7 +83,7 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size) +static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) { if (!aper_base) return 0; @@ -96,8 +96,9 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size) printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); return 0; } - if (aper_size < 64*1024*1024) { - printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20); + if (aper_size < min_size) { + printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", + aper_size>>20, min_size>>20); return 0; } @@ -167,7 +168,9 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) * On some sick chips, APSIZE is 0. It means it wants 4G * so let double check that order, and lets trust AMD NB settings: */ - if (aper + (32UL<<(20 + *order)) > 0x100000000UL) { + printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", + aper, 32 << old_order); + if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", 32 << *order, apsizereg); *order = old_order; @@ -176,7 +179,7 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); - if (!aperture_valid(aper, (32*1024*1024) << *order)) + if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; return (u32)aper; } @@ -302,8 +305,8 @@ void __init early_gart_iommu_check(void) fix = 1; if (gart_fix_e820 && !fix && aper_enabled) { - if (e820_any_mapped(aper_base, aper_base + aper_size, - E820_RAM)) { + if (!e820_all_mapped(aper_base, aper_base + aper_size, + E820_RESERVED)) { /* reserved it, so we can resuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); @@ -324,8 +327,11 @@ void __init early_gart_iommu_check(void) } +static int __initdata printed_gart_size_msg; + void __init gart_iommu_hole_init(void) { + u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; int fix, num, valid_agp = 0; @@ -337,6 +343,9 @@ void __init gart_iommu_hole_init(void) printk(KERN_INFO "Checking aperture...\n"); + if (!fallback_aper_force) + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; node = 0; for (num = 24; num < 32; num++) { @@ -355,9 +364,21 @@ void __init gart_iommu_hole_init(void) node, aper_base, aper_size >> 20); node++; - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + break; + } } if ((last_aper_order && aper_order != last_aper_order) || @@ -378,8 +399,10 @@ void __init gart_iommu_hole_init(void) return; } - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + if (!fallback_aper_force) { + aper_alloc = agp_aper_base; + aper_order = agp_aper_order; + } if (aper_alloc) { /* Got the aperture from the AGP bridge */ -- cgit v1.2.1 From 7677b2ef6c0c4fddc84f6473f3863f40eb71821b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 14 Apr 2008 20:40:37 -0700 Subject: x86_64: allocate gart aperture from 512M because we try to reserve dma32 early, so we have chance to get aperture from 64M. with some sequence aperture allocated from RAM, could become E820_RESERVED. and then if doing a kexec with a big kernel that uncompressed size is above 64M we could have a range conflict with still using gart. So allocate gart aperture from 512M instead. Also change the fallback_aper_order to 5, because we don't have chance to get 2G or 4G aperture. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 20 +++++++++++++++++--- arch/x86/kernel/pci-dma.c | 6 +++++- 2 files changed, 22 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 8c325b7f2d9b..c63f8d9fad3e 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -55,8 +55,9 @@ static u32 __init allocate_aperture(void) u32 aper_size; void *p; - if (fallback_aper_order > 7) - fallback_aper_order = 7; + /* aper_size should <= 1G */ + if (fallback_aper_order > 5) + fallback_aper_order = 5; aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* @@ -65,7 +66,20 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + /* + * using 512M as goal, in case kexec will load kernel_big + * that will do the on position decompress, and could overlap with + * that positon with gart that is used. + * sequende: + * kernel_small + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kernel_small(gart area become e820_reserved) + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * so don't use 512M below as gart iommu, leave the space for kernel + * code for safe + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); if (!p || __pa(p)+aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%p,%uK)\n", diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 0c37f16b6950..1a017f00e867 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -77,10 +77,14 @@ void __init dma32_reserve_bootmem(void) if (end_pfn <= MAX_DMA32_PFN) return; + /* + * check aperture_64.c allocate_aperture() for reason about + * using 512M as goal + */ align = 64ULL<<20; size = round_up(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, - __pa(MAX_DMA_ADDRESS)); + 512ULL<<20); if (dma32_bootmem_ptr) dma32_bootmem_size = size; else -- cgit v1.2.1 From 55c0d721df80dcc505dc888e85d4ca51ea150ce9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 19 Apr 2008 01:31:11 -0700 Subject: x86: clean up aperture_64.c 1. use symbolic register names where appropriate. 2. num to bus or slot changing 3. handle for new opteron for bus other than 0 Signed-off-by: Yinghai Lu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/aperture_64.c | 230 +++++++++++++++++++++++++----------------- 1 file changed, 139 insertions(+), 91 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index c63f8d9fad3e..02f4dbaa4df4 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -35,6 +35,18 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +struct bus_dev_range { + int bus; + int dev_base; + int dev_limit; +}; + +static struct bus_dev_range bus_dev_ranges[] __initdata = { + { 0x00, 0x18, 0x20}, + { 0xff, 0x00, 0x20}, + { 0xfe, 0x00, 0x20} +}; + static struct resource gart_resource = { .name = "GART", .flags = IORESOURCE_MEM, @@ -120,33 +132,33 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) } /* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) +static __u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & PCI_STATUS_CAP_LIST)) return 0; - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { u8 id; pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); if (id == 0xff) break; if (id == cap) return pos; - pos = read_pci_config_byte(num, slot, func, + pos = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_NEXT); } return 0; } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; @@ -155,8 +167,8 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) u64 aper; u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); + printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); return 0; @@ -174,8 +186,8 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) if ((int)*order < 0) /* < 32MB */ *order = 0; - aper_low = read_pci_config(num, slot, func, 0x10); - aper_hi = read_pci_config(num, slot, func, 0x14); + aper_low = read_pci_config(bus, slot, func, 0x10); + aper_hi = read_pci_config(bus, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); /* @@ -213,15 +225,15 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) */ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) { - int num, slot, func; + int bus, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { + for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; u8 type; - class = read_pci_config(num, slot, func, + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) break; @@ -230,17 +242,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(num, slot, func, + cap = find_cap(bus, slot, func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; - return read_agp(num, slot, func, cap, + return read_agp(bus, slot, func, cap, order); } /* No multi-function device? */ - type = read_pci_config_byte(num, slot, func, + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) break; @@ -280,38 +292,49 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int fix, num; + int fix, slot; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; int aper_enabled = 0, last_aper_enabled = 0; + int i; if (!early_pci_allowed()) return; fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - ctl = read_pci_config(0, num, 3, 0x90); - aper_enabled = ctl & 1; - aper_order = (ctl >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base) || - (last_aper_enabled && aper_enabled != last_aper_enabled)) { - fix = 1; - break; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + aper_enabled = ctl & AMD64_GARTEN; + aper_order = (ctl >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base) || + (last_aper_enabled && aper_enabled != last_aper_enabled)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; + last_aper_enabled = aper_enabled; } - last_aper_order = aper_order; - last_aper_base = aper_base; - last_aper_enabled = aper_enabled; } +out: if (!fix && !aper_enabled) return; @@ -330,13 +353,22 @@ void __init early_gart_iommu_check(void) } /* different nodes have different setting, disable them all at first*/ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; - ctl = read_pci_config(0, num, 3, 0x90); - ctl &= ~1; - write_pci_config(0, num, 3, 0x90, ctl); + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + ctl &= ~AMD64_GARTEN; + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); + } } } @@ -348,8 +380,8 @@ void __init gart_iommu_hole_init(void) u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; - int fix, num, valid_agp = 0; - int node; + int fix, slot, valid_agp = 0; + int i, node; if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) @@ -362,48 +394,58 @@ void __init gart_iommu_hole_init(void) fix = 0; node = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - iommu_detected = 1; - gart_iommu_aperture = 1; - - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); - node++; - - if (!aperture_valid(aper_base, aper_size, 64<<20)) { - if (valid_agp && agp_aper_base && - agp_aper_base == aper_base && - agp_aper_order == aper_order) { - /* the same between two setting from NB and agp */ - if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { - printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); - printk(KERN_ERR "please increase GART size in your BIOS setup\n"); - printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); - printed_gart_size_msg = 1; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + iommu_detected = 1; + gart_iommu_aperture = 1; + + aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", + node, aper_base, aper_size >> 20); + node++; + + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + goto out; } - } else { - fix = 1; - break; } - } - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; } - last_aper_order = aper_order; - last_aper_base = aper_base; } +out: if (!fix && !fallback_aper_force) { if (last_aper_base) { unsigned long n = (32 * 1024 * 1024) << last_aper_order; @@ -452,16 +494,22 @@ void __init gart_iommu_hole_init(void) } /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - /* - * Don't enable translation yet. That is done later. - * Assume this BIOS didn't initialise the GART so - * just overwrite all previous bits - */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1); + write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25); + } } } -- cgit v1.2.1 From 330fce23dab6e6a3d1979e55f27aba4c0c301331 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 19 Apr 2008 01:31:45 -0700 Subject: x86: reserve dma32 early for gart fix we can use free_bootmem() directly. Signed-off-by: Yinghai Lu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-dma.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 1a017f00e867..81862d0c7a9a 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -92,7 +92,6 @@ void __init dma32_reserve_bootmem(void) } static void __init dma32_free_bootmem(void) { - int node; if (end_pfn <= MAX_DMA32_PFN) return; @@ -100,9 +99,7 @@ static void __init dma32_free_bootmem(void) if (!dma32_bootmem_ptr) return; - for_each_online_node(node) - free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), - dma32_bootmem_size); + free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size); dma32_bootmem_ptr = NULL; dma32_bootmem_size = 0; -- cgit v1.2.1 From 3bb6fbf9969a8bbe4892968659239273d092e78a Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 15 Apr 2008 12:43:57 +0200 Subject: x86 gart: factor out common code Cleanup gart handling on amd64 a bit: move common code into enable_gart_translation , and use symbolic register names where appropriate. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-gart_64.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index bffcf455c857..1f99b62ff616 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -533,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) unsigned aper_size = 0, aper_base_32, aper_order; u64 aper_base; - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); + pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); aper_order = (aper_order >> 1) & 7; aper_base = aper_base_32 & 0x7fff; @@ -592,19 +592,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info) agp_gatt_table = gatt; for (i = 0; i < num_k8_northbridges; i++) { - u32 gatt_reg; - u32 ctl; - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, AMD64_GARTTABLEBASE, gatt_reg); - pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - - ctl |= GARTEN; - ctl &= ~(DISGARTCPU | DISGARTIO); - - pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); + enable_gart_translation(dev, __pa(gatt)); } flush_gart(); @@ -648,11 +637,11 @@ void gart_iommu_shutdown(void) u32 ctl; dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl &= ~1; + ctl &= ~GARTEN; - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } } -- cgit v1.2.1 From f784946ded3e734524d1f48a6a8286b8a152c3b9 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 2 May 2008 16:45:08 -0700 Subject: x86: use per_cpu data in nmi_32 use per_cpu for per CPU data. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi_32.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 11b14bbaa61e..69bdae555c18 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -293,9 +293,9 @@ void stop_apic_nmi_watchdog(void *unused) * here too!] */ -static unsigned int - last_irq_sums [NR_CPUS], - alert_counter [NR_CPUS]; +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog(void) { @@ -303,12 +303,13 @@ void touch_nmi_watchdog(void) unsigned cpu; /* - * Just reset the alert counters, (other CPUs might be - * spinning on locks we hold): + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. */ for_each_present_cpu(cpu) { - if (alert_counter[cpu]) - alert_counter[cpu] = 0; + if (per_cpu(nmi_touch, cpu) != 1) + per_cpu(nmi_touch, cpu) = 1; } } @@ -358,22 +359,26 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) */ sum = per_cpu(irq_stat, cpu).apic_timer_irqs + per_cpu(irq_stat, cpu).irq0_irqs; + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && last_irq_sums[cpu] == sum) { + if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ - alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); } else { - last_irq_sums[cpu] = sum; - alert_counter[cpu] = 0; + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); } /* see if the nmi watchdog went off */ if (!__get_cpu_var(wd_enabled)) -- cgit v1.2.1 From f59a9310b97879159ef4d25227bc270278f1ee71 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 2 May 2008 16:44:52 -0700 Subject: x86: nmi and irq counters are unsigned in nmi_64.c __nmi_count, apic_timer_irqs and irq0_irqs are unsigned. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded994fa..33cb8ecbb6dd 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -79,7 +79,7 @@ static __init void nmi_cpu_busy(void *data) int __init check_nmi_watchdog(void) { - int *prev_nmi_count; + unsigned int *prev_nmi_count; int cpu; if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) @@ -316,7 +316,7 @@ EXPORT_SYMBOL(touch_nmi_watchdog); notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { - int sum; + unsigned int sum; int touched = 0; int cpu = smp_processor_id(); int rc = 0; -- cgit v1.2.1 From 622e3f28e50fe30cc199c735440cd7c75e0033b0 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 4 May 2008 19:57:19 +0400 Subject: x86: 64-bit defconfig remake The current x86_64_defconfig contains a number of nonexistent symbols. Lets fix it. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/x86_64_defconfig | 627 ++++++++++++++++++++------------------ 1 file changed, 328 insertions(+), 299 deletions(-) (limited to 'arch') diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2d6f5b2809d2..2f1b35664998 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,48 +1,65 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:27:29 2008 # -CONFIG_X86_64=y CONFIG_64BIT=y +# CONFIG_X86_32 is not set +CONFIG_X86_64=y CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_ZONE_DMA32=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_NR_QUICK=2 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_CMPXCHG=y -CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_DMI=y -CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_64_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +# CONFIG_KTIME_SCALAR is not set # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -51,14 +68,21 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -66,6 +90,7 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -73,6 +98,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -85,6 +111,17 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -98,6 +135,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -111,107 +149,169 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_MEMTEST_BOOTPARAM is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set # CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y +CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_INTERNODE_CACHE_BYTES=128 -CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_GOOD_APIC=y -# CONFIG_MICROCODE is not set -CONFIG_X86_MSR=y -CONFIG_X86_CPUID=y -CONFIG_X86_HT=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_MTRR=y -CONFIG_SMP=y +CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +CONFIG_GART_IOMMU=y +# CONFIG_CALGARY_IOMMU is not set +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_NR_CPUS=32 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +# CONFIG_I8K is not set +# CONFIG_MICROCODE is not set +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y CONFIG_NUMA=y CONFIG_K8_NUMA=y -CONFIG_NODES_SHIFT=6 CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_NUMA_EMU=y +CONFIG_NODES_SHIFT=6 +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +# CONFIG_SPARSEMEM_VMEMMAP is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y -CONFIG_NR_CPUS=32 -CONFIG_PHYSICAL_ALIGN=0x200000 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_MTRR=y +# CONFIG_X86_PAT is not set +# CONFIG_EFI is not set CONFIG_SECCOMP=y -# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -CONFIG_K8_NB=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ISA_DMA_API=y -CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_SCHED_HRTICK=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x200000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management options # +CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +# CONFIG_SUSPEND is not set CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y -CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y @@ -230,7 +330,10 @@ CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -240,16 +343,19 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # +CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set -CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y -# CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_X86_SPEEDSTEP_LIB=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) @@ -257,16 +363,18 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +# CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_ISA_DMA_API=y +CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -274,10 +382,12 @@ CONFIG_PCI_MSI=y # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # @@ -313,6 +423,7 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -334,8 +445,10 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -352,10 +465,6 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -364,6 +473,7 @@ CONFIG_IPV6_SIT=y # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -385,6 +495,7 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -416,7 +527,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -427,17 +538,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -449,18 +563,21 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y @@ -487,9 +604,8 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -528,105 +644,16 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +# CONFIG_SATA_PMP is not set CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y -CONFIG_ATA_PIIX=y -# CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +# CONFIG_ATA_SFF is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y @@ -637,16 +664,14 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support @@ -687,6 +712,7 @@ CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -709,15 +735,21 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y # CONFIG_AMD8111E_NAPI is not set # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -729,6 +761,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -740,6 +773,10 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -755,12 +792,17 @@ CONFIG_BNX2=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -768,6 +810,8 @@ CONFIG_S2IO=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -776,7 +820,6 @@ CONFIG_S2IO=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -784,8 +827,8 @@ CONFIG_S2IO=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -807,7 +850,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -856,7 +898,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -880,7 +924,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y @@ -888,12 +931,6 @@ CONFIG_HW_RANDOM_AMD=y CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y @@ -906,40 +943,69 @@ CONFIG_HPET_MMAP=y # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=y +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_AGP=y +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -971,6 +1037,7 @@ CONFIG_SOUND_PRIME=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y # # USB Input Devices @@ -985,6 +1052,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -993,18 +1061,19 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -1036,7 +1105,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1049,10 +1120,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1078,55 +1145,20 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set - -# -# Userspace I/O -# +# CONFIG_INTEL_IOATDMA is not set # CONFIG_UIO is not set # @@ -1136,6 +1168,7 @@ CONFIG_VIRTUALIZATION=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems @@ -1164,12 +1197,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1204,7 +1235,6 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1219,48 +1249,19 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1301,25 +1302,16 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y @@ -1330,6 +1322,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1344,28 +1337,64 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_IOMMU_DEBUG is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set +CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +# CONFIG_DEBUG_RODATA is not set +# CONFIG_DIRECT_GBPAGES is not set +# CONFIG_DEBUG_NX_TEST is not set +CONFIG_X86_MPPARSE=y +# CONFIG_IOMMU_DEBUG is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_HAVE_KVM is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_KVM is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v1.2.1 From b5d958ea66ac11b1190c24f042f517adf9229a98 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Wed, 9 Apr 2008 13:17:39 -0700 Subject: e1000e: set CONFIG_E1000E=y in x86 defconfigs This adds to the already default CONFIG_E1000=y in these files. Signed-off-by: Auke Kok Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/i386_defconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index ad7ddaaff588..73f2c3cb7cda 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -814,6 +814,10 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +CONFIG_E1000E=y +CONFIG_E1000E_ENABLED=y +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -- cgit v1.2.1 From 5cb04df8d3f03e37a19f2502591a84156be71772 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 4 May 2008 19:49:04 +0200 Subject: x86: defconfig updates refresh 32-bit defconfig too, and update the 64-bit configs as well, the defconfig should be much more useful by default, so most of the updates are the enabling of various options. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/i386_defconfig | 1711 ++++++++++++++++++++++++++----------- arch/x86/configs/x86_64_defconfig | 1378 ++++++++++++++++++++++------- 2 files changed, 2291 insertions(+), 798 deletions(-) (limited to 'arch') diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 73f2c3cb7cda..9bc34e2033ec 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,54 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:59:02 2008 # +# CONFIG_64BIT is not set CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_32_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -56,13 +105,15 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -76,6 +127,17 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -87,10 +149,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LBD is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_BSG=y # # IO Schedulers @@ -103,7 +165,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features @@ -111,18 +174,21 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y -# CONFIG_X86_PC is not set +CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set -CONFIG_X86_GENERICARCH=y +# CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set -# CONFIG_PARAVIRT is not set -CONFIG_X86_CYCLONE_TIMER=y +# CONFIG_X86_RDC321X is not set +# CONFIG_X86_VSMP is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -130,9 +196,8 @@ CONFIG_X86_CYCLONE_TIMER=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set -CONFIG_MPENTIUMIII=y +# CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set -# CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set @@ -147,14 +212,14 @@ CONFIG_MPENTIUMIII=y # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set -CONFIG_X86_GENERIC=y +# CONFIG_MPSC is not set +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y @@ -162,106 +227,120 @@ CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MINIMUM_CPU_FAMILY=6 +CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_DMI=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y +# CONFIG_X86_MCE is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set -CONFIG_MICROCODE=y -CONFIG_MICROCODE_OLD_INTERFACE=y +# CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_DMIID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y -CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_NEED_NODE_MEMMAP_SIZE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y -# CONFIG_EFI is not set +# CONFIG_X86_PAT is not set +CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_HOTPLUG_CPU is not set -CONFIG_COMPAT_VDSO=y +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # -# Power management options (ACPI, APM) +# Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=2001 -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set @@ -271,15 +350,17 @@ CONFIG_X86_PM_TIMER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -287,8 +368,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set @@ -302,43 +382,72 @@ CONFIG_X86_POWERNOW_K8_ACPI=y # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y +# CONFIG_PCI_GOOLPC is not set CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set +# CONFIG_OLPC is not set CONFIG_K8_NB=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_IBM is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Networking @@ -349,59 +458,142 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -409,6 +601,7 @@ CONFIG_IPV6_SIT=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -416,28 +609,99 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -449,13 +713,15 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -466,7 +732,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -479,8 +745,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -489,73 +755,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_TC1100_WMI is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support @@ -564,8 +774,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -574,7 +784,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -582,7 +792,7 @@ CONFIG_CHR_DEV_SG=y # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m @@ -591,81 +801,37 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -CONFIG_BLK_DEV_3W_XXXX_RAID=y -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=y -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y +# CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y +# CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set +CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set @@ -673,6 +839,7 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set @@ -686,11 +853,14 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set +CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -702,65 +872,42 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -770,38 +917,40 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -814,38 +963,75 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -CONFIG_E1000E=y -CONFIG_E1000E_ENABLED=y +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set +# CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_IBMLS is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -854,16 +1040,27 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_PCMCIA_IBMTR is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -874,18 +1071,17 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -910,17 +1106,63 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -933,8 +1175,26 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -944,9 +1204,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -955,89 +1220,275 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set -CONFIG_AGP=y -# CONFIG_AGP_ALI is not set -# CONFIG_AGP_ATI is not set -# CONFIG_AGP_AMD is not set -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_NVIDIA is not set -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_SWORKS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_AGP_EFFICEON is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC7240_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_AGP=y +# CONFIG_AGP_ALI is not set +# CONFIG_AGP_ATI is not set +# CONFIG_AGP_AMD is not set +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_NVIDIA is not set +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_SWORKS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_AGP_EFFICEON is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1047,33 +1498,167 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1081,18 +1666,18 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1125,8 +1710,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1138,10 +1725,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1167,90 +1750,125 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +# CONFIG_LEDS_CLEVO_MAIL is not set # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y # -# LED devices +# Reporting subsystems # -# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# I2C RTC drivers # -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # -# Real Time Clock +# SPI RTC drivers # -# CONFIG_RTC_CLASS is not set # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set +# CONFIG_INTEL_IOATDMA is not set +# CONFIG_UIO is not set # -# Userspace I/O +# Firmware Drivers # -# CONFIG_UIO is not set +# CONFIG_EDD is not set +CONFIG_EFI_VARS=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1260,8 +1878,8 @@ CONFIG_GENERIC_ACL=y # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set +CONFIG_JOLIET=y +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1279,13 +1897,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1293,6 +1911,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1300,33 +1919,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1336,14 +1937,26 @@ CONFIG_SUNRPC=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1378,37 +1991,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -# CONFIG_DEBUG_FS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1423,48 +2032,174 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_LGUEST is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2f1b35664998..ae5124e064d4 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc1 -# Sun May 4 19:27:29 2008 +# Sun May 4 19:59:57 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set @@ -61,27 +61,42 @@ CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set # CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y -# CONFIG_USER_NS is not set +CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -93,7 +108,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -108,12 +123,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set -CONFIG_OPROFILE=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y @@ -133,15 +149,15 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set @@ -155,7 +171,7 @@ CONFIG_CLASSIC_RCU=y # Processor type and features # CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set +CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y @@ -171,7 +187,8 @@ CONFIG_X86_PC=y # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set -# CONFIG_MEMTEST_BOOTPARAM is not set +CONFIG_MEMTEST_BOOTPARAM=y +CONFIG_MEMTEST_BOOTPARAM_VALUE=0 # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -196,14 +213,17 @@ CONFIG_X86_PC=y # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -CONFIG_GENERIC_CPU=y +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 @@ -212,20 +232,19 @@ CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set +CONFIG_CALGARY_IOMMU=y +CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y +# CONFIG_X86_MCE is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y @@ -234,7 +253,7 @@ CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA_EMU=y +# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -249,7 +268,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -# CONFIG_SPARSEMEM_VMEMMAP is not set +CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend @@ -263,18 +282,18 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_X86_PAT is not set -# CONFIG_EFI is not set +CONFIG_EFI=y CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 -# CONFIG_RELOCATABLE is not set +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set @@ -286,10 +305,15 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_DEBUG is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y -# CONFIG_SUSPEND is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y @@ -327,35 +351,34 @@ CONFIG_ACPI_CONTAINER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set -CONFIG_X86_P4_CLOCKMOD=y +# CONFIG_X86_P4_CLOCKMOD is not set # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y -CONFIG_X86_SPEEDSTEP_LIB=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set +# CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) @@ -364,28 +387,53 @@ CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y -# CONFIG_DMAR is not set +CONFIG_DMAR=y +CONFIG_DMAR_GFX_WA=y +CONFIG_DMAR_FLOPPY_WA=y CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=y +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y @@ -399,22 +447,31 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -423,34 +480,109 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -458,6 +590,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -465,25 +598,99 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -500,9 +707,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -513,7 +721,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -526,7 +734,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -536,77 +744,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support @@ -615,8 +762,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -625,7 +772,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -642,76 +789,110 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y -# CONFIG_SATA_PMP is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set +# CONFIG_PATA_ALI is not set +CONFIG_PATA_AMD=y +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +CONFIG_PATA_OLDPIIX=y +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LOGGING is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=y +# CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set @@ -722,18 +903,16 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -741,13 +920,9 @@ CONFIG_TULIP=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set +# CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set # CONFIG_EEPRO100 is not set @@ -755,9 +930,9 @@ CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set @@ -783,10 +958,11 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set -# CONFIG_SKY2 is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y @@ -794,8 +970,7 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set +# CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -803,15 +978,44 @@ CONFIG_S2IO=m # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_SFC is not set -# CONFIG_TR is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set # CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -821,8 +1025,19 @@ CONFIG_S2IO=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -839,14 +1054,14 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set @@ -874,17 +1089,62 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -897,9 +1157,25 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set # CONFIG_NOZOMI is not set # @@ -910,9 +1186,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -921,28 +1202,78 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y @@ -951,20 +1282,55 @@ CONFIG_POWER_SUPPLY=y # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=y -CONFIG_SSB_SPROM=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_B43_PCI_BRIDGE is not set -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -996,11 +1362,81 @@ CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support @@ -1012,9 +1448,14 @@ CONFIG_AGP_INTEL=y # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1024,35 +1465,165 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1060,7 +1631,7 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # @@ -1073,7 +1644,6 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -1108,7 +1678,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1148,11 +1718,78 @@ CONFIG_USB_MON=y # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_CLEVO_MAIL is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_DMADEVICES=y # @@ -1165,6 +1802,7 @@ CONFIG_DMADEVICES=y # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y @@ -1173,25 +1811,16 @@ CONFIG_DMIID=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set @@ -1200,7 +1829,12 @@ CONFIG_FS_POSIX_ACL=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1211,7 +1845,7 @@ CONFIG_GENERIC_ACL=y # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1229,6 +1863,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y @@ -1242,6 +1877,7 @@ CONFIG_HUGETLB_PAGE=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1255,15 +1891,38 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1298,7 +1957,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y @@ -1309,21 +1968,22 @@ CONFIG_NLS_UTF8=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1340,7 +2000,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -1348,20 +2008,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_SAMPLES is not set # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_RODATA=y # CONFIG_DIRECT_GBPAGES is not set -# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set CONFIG_IO_DELAY_TYPE_0X80=0 @@ -1373,18 +2034,115 @@ CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_DEBUG_BOOT_PARAMS is not set +CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_HAVE_KVM is not set -# CONFIG_VIRTUALIZATION is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_X86_64 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_X86_64 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set -- cgit v1.2.1 From 205f93288093df69f9ab5f6981aef27b91088b28 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 5 May 2008 17:52:52 -0400 Subject: x86: add new cache descriptor The latest rev of Intel doc AP-485 details a new cache descriptor that we don't yet support. A 6MB 24-way assoc L2 cache. Signed-off-by: Dave Jones Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/intel_cacheinfo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 26d615dcb149..2c8afafa18e8 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x4e, LVL_2, 6144 }, /* 24-way set assoc, 64 byte line size */ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ -- cgit v1.2.1 From 0327318445d55808991a63137cfb698a90ab6adf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 18 Apr 2008 17:49:15 -0700 Subject: x86_64: simplify the memtest parameter setting use CONFIG_MEMTEST only. if it is set, will have memtest=0 (disabled) need to have memtest=4 in command line to test more patterns. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 30 +++++++----------------------- arch/x86/mm/init_64.c | 5 +++-- 2 files changed, 10 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..a1a9021146bc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -419,35 +419,19 @@ config PARAVIRT endif -config MEMTEST_BOOTPARAM - bool "Memtest boot parameter" +config MEMTEST + bool "Memtest" depends on X86_64 default y help This option adds a kernel parameter 'memtest', which allows memtest - to be disabled at boot. If this option is selected, memtest - functionality can be disabled with memtest=0 on the kernel - command line. The purpose of this option is to allow a single - kernel image to be distributed with memtest built in, but not - necessarily enabled. - + to be set. + memtest=0, mean disabled; -- default + memtest=1, mean do 1 test pattern; + ... + memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer Y. -config MEMTEST_BOOTPARAM_VALUE - int "Memtest boot parameter default value (0-4)" - depends on MEMTEST_BOOTPARAM - range 0 4 - default 0 - help - This option sets the default value for the kernel parameter - 'memtest', which allows memtest to be disabled at boot. If this - option is set to 0 (zero), the memtest kernel parameter will - default to 0, disabling memtest at bootup. If this option is - set to 4, the memtest kernel parameter will default to 4, - enabling memtest at bootup, and use that as pattern number. - - If you are unsure how to answer this question, answer 0. - config ACPI_SRAT def_bool y depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..c6d81316db65 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -431,7 +431,7 @@ static void __init init_gbpages(void) direct_gbpages = 0; } -#ifdef CONFIG_MEMTEST_BOOTPARAM +#ifdef CONFIG_MEMTEST static void __init memtest(unsigned long start_phys, unsigned long size, unsigned pattern) @@ -493,7 +493,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size, } -static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE; +/* default is disabled */ +static int memtest_pattern __initdata; static int __init parse_memtest(char *arg) { -- cgit v1.2.1 From 0c401df37ef9f45f35390a5574e24cbf3f916acf Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:10:18 -0600 Subject: cris: cdev lock_kernel() pushdown Push the cdev lock_kernel() call into cris drivers. Signed-off-by: Jonathan Corbet --- arch/cris/arch-v10/drivers/gpio.c | 3 +++ arch/cris/arch-v10/drivers/sync_serial.c | 34 +++++++++++++++++++------------ arch/cris/arch-v32/drivers/mach-a3/gpio.c | 4 ++++ arch/cris/arch-v32/drivers/mach-fs/gpio.c | 5 ++++- arch/cris/arch-v32/drivers/sync_serial.c | 33 ++++++++++++++++++------------ 5 files changed, 52 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index 68a998bd1069..86048e697eb5 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -323,6 +324,7 @@ gpio_open(struct inode *inode, struct file *filp) if (!priv) return -ENOMEM; + lock_kernel(); priv->minor = p; /* initialize the io/alarm struct */ @@ -357,6 +359,7 @@ gpio_open(struct inode *inode, struct file *filp) alarmlist = priv; spin_unlock_irqrestore(&gpio_lock, flags); + unlock_kernel(); return 0; } diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 069546e342c5..91fea623c7c9 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -443,18 +444,21 @@ static int sync_serial_open(struct inode *inode, struct file *file) int dev = MINOR(inode->i_rdev); struct sync_port *port; int mode; + int err = -EBUSY; + lock_kernel(); DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); - return -ENODEV; + err = -ENODEV; + goto out; } port = &ports[dev]; /* Allow open this device twice (assuming one reader and one writer) */ if (port->busy == 2) { DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); - return -EBUSY; + goto out; } if (port->init_irqs) { if (port->use_dma) { @@ -465,14 +469,14 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[0])) { printk(KERN_CRIT "Can't alloc " "sync serial port 1 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(25, rx_interrupt, 0, "synchronous serial 1 dma rx", &ports[0])) { free_irq(24, &port[0]); printk(KERN_CRIT "Can't alloc " "sync serial port 1 IRQ"); - return -EBUSY; + goto out; } else if (cris_request_dma(8, "synchronous serial 1 dma tr", DMA_VERBOSE_ON_ERROR, @@ -482,7 +486,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 1 " "TX DMA channel"); - return -EBUSY; + goto out; } else if (cris_request_dma(9, "synchronous serial 1 dma rec", DMA_VERBOSE_ON_ERROR, @@ -493,7 +497,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 1 " "RX DMA channel"); - return -EBUSY; + goto out; } #endif RESET_DMA(8); WAIT_DMA(8); @@ -520,14 +524,14 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[1])) { printk(KERN_CRIT "Can't alloc " "sync serial port 3 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(21, rx_interrupt, 0, "synchronous serial 3 dma rx", &ports[1])) { free_irq(20, &ports[1]); printk(KERN_CRIT "Can't alloc " "sync serial port 3 IRQ"); - return -EBUSY; + goto out; } else if (cris_request_dma(4, "synchronous serial 3 dma tr", DMA_VERBOSE_ON_ERROR, @@ -537,7 +541,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 3 " "TX DMA channel"); - return -EBUSY; + goto out; } else if (cris_request_dma(5, "synchronous serial 3 dma rec", DMA_VERBOSE_ON_ERROR, @@ -548,7 +552,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 3 " "RX DMA channel"); - return -EBUSY; + goto out; } #endif RESET_DMA(4); WAIT_DMA(4); @@ -581,7 +585,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[0])) { printk(KERN_CRIT "Can't alloc " "sync serial manual irq"); - return -EBUSY; + goto out; } } else if (port == &ports[1]) { if (request_irq(8, @@ -591,7 +595,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[1])) { printk(KERN_CRIT "Can't alloc " "sync serial manual irq"); - return -EBUSY; + goto out; } } port->init_irqs = 0; @@ -620,7 +624,11 @@ static int sync_serial_open(struct inode *inode, struct file *file) *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev)); } - return 0; + ret = 0; + +out: + unlock_kernel(); + return ret; } static int sync_serial_release(struct inode *inode, struct file *file) diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c index de107dad9f4f..ef98608e5067 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -390,6 +391,8 @@ static int gpio_open(struct inode *inode, struct file *filp) if (!priv) return -ENOMEM; + + lock_kernel(); memset(priv, 0, sizeof(*priv)); priv->minor = p; @@ -412,6 +415,7 @@ static int gpio_open(struct inode *inode, struct file *filp) spin_unlock_irq(&gpio_lock); } + unlock_kernel(); return 0; } diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c index 7863fd4efc2b..fe1fde893887 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -426,9 +427,10 @@ gpio_open(struct inode *inode, struct file *filp) return -EINVAL; priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL); - if (!priv) return -ENOMEM; + + lock_kernel(); memset(priv, 0, sizeof(*priv)); priv->minor = p; @@ -449,6 +451,7 @@ gpio_open(struct inode *inode, struct file *filp) alarmlist = priv; spin_unlock_irq(&alarm_lock); + unlock_kernel(); return 0; } diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index 47c377df6fb3..d2a0fbf5341f 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -429,23 +430,26 @@ static inline int sync_data_avail_to_end(struct sync_port *port) static int sync_serial_open(struct inode *inode, struct file *file) { int dev = iminor(inode); + int ret = -EBUSY; sync_port *port; reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; + lock_kernel(); DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); - return -ENODEV; + ret = -ENODEV; + goto out; } port = &ports[dev]; /* Allow open this device twice (assuming one reader and one writer) */ if (port->busy == 2) { DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); - return -EBUSY; + goto out; } @@ -459,7 +463,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial 0 dma tr", &ports[0])) { printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(DMA_IN_INTR_VECT, rx_interrupt, 0, @@ -467,7 +471,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[0])) { free_irq(DMA_OUT_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); - return -EBUSY; + goto out; } else if (crisv32_request_dma(OUT_DMA_NBR, "synchronous serial 0 dma tr", DMA_VERBOSE_ON_ERROR, @@ -476,7 +480,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA_OUT_INTR_VECT, &port[0]); free_irq(DMA_IN_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel"); - return -EBUSY; + goto out; } else if (crisv32_request_dma(IN_DMA_NBR, "synchronous serial 0 dma rec", DMA_VERBOSE_ON_ERROR, @@ -486,7 +490,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA_OUT_INTR_VECT, &port[0]); free_irq(DMA_IN_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); - return -EBUSY; + goto out; } #endif } @@ -499,7 +503,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial 1 dma tr", &ports[1])) { printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(DMA7_INTR_VECT, rx_interrupt, 0, @@ -507,7 +511,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[1])) { free_irq(DMA6_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); - return -EBUSY; + goto out; } else if (crisv32_request_dma( SYNC_SER1_TX_DMA_NBR, "synchronous serial 1 dma tr", @@ -517,7 +521,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA6_INTR_VECT, &ports[1]); free_irq(DMA7_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); - return -EBUSY; + goto out; } else if (crisv32_request_dma( SYNC_SER1_RX_DMA_NBR, "synchronous serial 3 dma rec", @@ -528,7 +532,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA6_INTR_VECT, &ports[1]); free_irq(DMA7_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel"); - return -EBUSY; + goto out; } #endif } @@ -554,7 +558,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial manual irq", &ports[0])) { printk("Can't allocate sync serial manual irq"); - return -EBUSY; + goto out; } } #ifdef CONFIG_ETRAXFS @@ -565,7 +569,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial manual irq", &ports[1])) { printk(KERN_CRIT "Can't allocate sync serial manual irq"); - return -EBUSY; + goto out; } } #endif @@ -578,7 +582,10 @@ static int sync_serial_open(struct inode *inode, struct file *file) } /* port->init_irqs */ port->busy++; - return 0; + ret = 0; +out: + unlock_kernel(); + return ret; } static int sync_serial_release(struct inode *inode, struct file *file) -- cgit v1.2.1 From 7558da942e51933b5e6aa5e851d4da1df0cd6752 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:10:50 -0600 Subject: mips: cdev lock_kernel() pushdown Push the cdev lock_kernel() call into MIPS-specific drivers. Signed-off-by: Jonathan Corbet --- arch/mips/kernel/rtlx.c | 7 ++++++- arch/mips/kernel/vpe.c | 12 +++++++++--- arch/mips/sibyte/common/sb_tbprof.c | 25 ++++++++++++++++++------- 3 files changed, 33 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index b88f1c18ff4d..b55641961232 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -392,8 +393,12 @@ out: static int file_open(struct inode *inode, struct file *filp) { int minor = iminor(inode); + int err; - return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); + lock_kernel(); + err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); + unlock_kernel(); + return err; } static int file_release(struct inode *inode, struct file *filp) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 2794501ff302..972b2d2b8401 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -1050,17 +1051,20 @@ static int vpe_open(struct inode *inode, struct file *filp) enum vpe_state state; struct vpe_notifications *not; struct vpe *v; - int ret; + int ret, err = 0; + lock_kernel(); if (minor != iminor(inode)) { /* assume only 1 device at the moment. */ printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); - return -ENODEV; + err = -ENODEV; + goto out; } if ((v = get_vpe(tclimit)) == NULL) { printk(KERN_WARNING "VPE loader: unable to get vpe\n"); - return -ENODEV; + err = -ENODEV; + goto out; } state = xchg(&v->state, VPE_STATE_INUSE); @@ -1100,6 +1104,8 @@ static int vpe_open(struct inode *inode, struct file *filp) v->shared_ptr = NULL; v->__start = 0; +out: + unlock_kernel(); return 0; } diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index 63b444eaf01e..28b012ab8dcb 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -402,18 +403,26 @@ static int sbprof_zbprof_stop(void) static int sbprof_tb_open(struct inode *inode, struct file *filp) { int minor; + int err = 0; + lock_kernel(); minor = iminor(inode); - if (minor != 0) - return -ENODEV; + if (minor != 0) { + err = -ENODEV; + goto out; + } - if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) - return -EBUSY; + if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) { + err = -EBUSY; + goto out; + } memset(&sbp, 0, sizeof(struct sbprof_tb)); sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); - if (!sbp.sbprof_tbbuf) - return -ENOMEM; + if (!sbp.sbprof_tbbuf) { + err = -ENOMEM; + goto out; + } memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); init_waitqueue_head(&sbp.tb_sync); init_waitqueue_head(&sbp.tb_read); @@ -421,7 +430,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp) sbp.open = SB_OPEN; - return 0; + out: + unlock_kernel(); + return err; } static int sbprof_tb_release(struct inode *inode, struct file *filp) -- cgit v1.2.1 From 1fa984b583a809423ddb1d88fa46484071f85f80 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:11:26 -0600 Subject: sh: cdev lock_kernel() pushdown Push the cdev lock_kernel() call down into the sh gio driver. Signed-off-by: Jonathan Corbet --- arch/sh/boards/landisk/gio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index 17025080db35..0c15b0a50b99 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -14,6 +14,7 @@ */ #include #include +#include #include #include #include @@ -32,17 +33,20 @@ static int openCnt; static int gio_open(struct inode *inode, struct file *filp) { int minor; + int ret = -ENOENT; + lock_kernel(); minor = MINOR(inode->i_rdev); if (minor < DEVCOUNT) { if (openCnt > 0) { - return -EALREADY; + ret = -EALREADY; } else { openCnt++; - return 0; + ret = 0; } } - return -ENOENT; + unlock_kernel(); + return ret; } static int gio_close(struct inode *inode, struct file *filp) -- cgit v1.2.1 From 5119e92efc733d730b34f9605a5ae61fdc4bf649 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:12:01 -0600 Subject: x86: cdev lock_kernel() pushdown Push the cdev lock_kernel() call down into the x86 msr and cpuid drivers. Signed-off-by: Jonathan Corbet --- arch/x86/kernel/cpuid.c | 25 +++++++++++++++++-------- arch/x86/kernel/msr.c | 16 ++++++++++++---- 2 files changed, 29 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index daff52a62248..71f1c2654bec 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -107,15 +108,23 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, static int cpuid_open(struct inode *inode, struct file *file) { - unsigned int cpu = iminor(file->f_path.dentry->d_inode); - struct cpuinfo_x86 *c = &cpu_data(cpu); - - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ + unsigned int cpu; + struct cpuinfo_x86 *c; + int ret = 0; + + lock_kernel(); + + cpu = iminor(file->f_path.dentry->d_inode); + if (cpu >= NR_CPUS || !cpu_online(cpu)) { + ret = -ENXIO; /* No such CPU */ + goto out; + } + c = &cpu_data(cpu); if (c->cpuid_level < 0) - return -EIO; /* CPUID not supported */ - - return 0; + ret = -EIO; /* CPUID not supported */ +out: + unlock_kernel(); + return ret; } /* diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 1f3abe048e93..a153b3905f60 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -117,12 +117,20 @@ static int msr_open(struct inode *inode, struct file *file) { unsigned int cpu = iminor(file->f_path.dentry->d_inode); struct cpuinfo_x86 *c = &cpu_data(cpu); + int ret = 0; - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ - if (!cpu_has(c, X86_FEATURE_MSR)) - return -EIO; /* MSR not supported */ + lock_kernel(); + cpu = iminor(file->f_path.dentry->d_inode); + if (cpu >= NR_CPUS || !cpu_online(cpu)) { + ret = -ENXIO; /* No such CPU */ + goto out; + } + c = &cpu_data(cpu); + if (!cpu_has(c, X86_FEATURE_MSR)) + ret = -EIO; /* MSR not supported */ +out: + unlock_kernel(); return 0; } -- cgit v1.2.1 From 82524746c27fa418c250a56dd7606b9d3fc79826 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 12 May 2008 21:21:05 +0200 Subject: rcu: split list.h and move rcu-protected lists into rculist.h Move rcu-protected lists from list.h into a new header file rculist.h. This is done because list are a very used primitive structure all over the kernel and it's currently impossible to include other header files in this list.h without creating some circular dependencies. For example, list.h implements rcu-protected list and uses rcu_dereference() without including rcupdate.h. It actually compiles because users of rcu_dereference() are macros. Others RCU functions could be used too but aren't probably because of this. Therefore this patch creates rculist.h which includes rcupdates without to many changes/troubles. Signed-off-by: Franck Bui-Huu Acked-by: Paul E. McKenney Acked-by: Josh Triplett Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/ia64/sn/kernel/irq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 53351c3cd7b1..96c31b4180c3 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From 1a189b97190d3f0f8cf0379a799d3555b2d648bb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 13 Apr 2008 21:41:55 +0100 Subject: [ARM] pxa: Add bare bones PWM API Signed-off-by: Russell King --- arch/arm/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68914d4..c274dbb89a83 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -22,6 +22,9 @@ config ARM Europe. There is an ARM Linux project with a web page at . +config HAVE_PWM + bool + config SYS_SUPPORTS_APM_EMULATION bool -- cgit v1.2.1 From 75540c1ac3c7bd72ac8e092058f9714875239995 Mon Sep 17 00:00:00 2001 From: eric miao Date: Sun, 13 Apr 2008 21:44:04 +0100 Subject: [ARM] pxa: Add PXA support for PWM API Patch mainly from Eric Miao, with minor edits by rmk. Note: PWM0 and PWM2 share the same register I/O space and clock gating on pxa{27x, 3xx}, thus PWM2 is treated in the driver as a child PWM of PWM0. And this is also true for PWM1/3. Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 5 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/devices.c | 60 +++++++++ arch/arm/mach-pxa/devices.h | 5 + arch/arm/mach-pxa/pwm.c | 299 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/pxa25x.c | 6 +- arch/arm/mach-pxa/pxa27x.c | 5 +- arch/arm/mach-pxa/pxa3xx.c | 4 + 8 files changed, 382 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-pxa/pwm.c (limited to 'arch') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5da7a6820492..9c01505b1825 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -273,4 +273,9 @@ config PXA_SSP tristate help Enable support for PXA2xx SSP ports + +config PXA_PWM + tristate + help + Enable support for PXA2xx/PXA3xx PWM controllers endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 0e6d05bb81aa..02cbc3cfbe01 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o # Generic drivers that other drivers may depend upon obj-$(CONFIG_PXA_SSP) += ssp.o +obj-$(CONFIG_PXA_PWM) += pwm.o # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index d6c05b6eab35..794a1076db73 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -280,6 +280,36 @@ struct platform_device pxa_device_rtc = { #ifdef CONFIG_PXA25x +static struct resource pxa25x_resource_pwm0[] = { + [0] = { + .start = 0x40b00000, + .end = 0x40b0000f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa25x_device_pwm0 = { + .name = "pxa25x-pwm", + .id = 0, + .resource = pxa25x_resource_pwm0, + .num_resources = ARRAY_SIZE(pxa25x_resource_pwm0), +}; + +static struct resource pxa25x_resource_pwm1[] = { + [0] = { + .start = 0x40c00000, + .end = 0x40c0000f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa25x_device_pwm1 = { + .name = "pxa25x-pwm", + .id = 1, + .resource = pxa25x_resource_pwm1, + .num_resources = ARRAY_SIZE(pxa25x_resource_pwm1), +}; + static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32); static struct resource pxa25x_resource_ssp[] = { @@ -568,6 +598,36 @@ struct platform_device pxa27x_device_ssp3 = { .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), }; +static struct resource pxa27x_resource_pwm0[] = { + [0] = { + .start = 0x40b00000, + .end = 0x40b0001f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa27x_device_pwm0 = { + .name = "pxa27x-pwm", + .id = 0, + .resource = pxa27x_resource_pwm0, + .num_resources = ARRAY_SIZE(pxa27x_resource_pwm0), +}; + +static struct resource pxa27x_resource_pwm1[] = { + [0] = { + .start = 0x40c00000, + .end = 0x40c0001f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa27x_device_pwm1 = { + .name = "pxa27x-pwm", + .id = 1, + .resource = pxa27x_resource_pwm1, + .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1), +}; + static struct resource pxa27x_resource_camera[] = { [0] = { .start = 0x50000000, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index fcab017f27ee..e620a3373d42 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -24,4 +24,9 @@ extern struct platform_device pxa27x_device_ssp2; extern struct platform_device pxa27x_device_ssp3; extern struct platform_device pxa3xx_device_ssp4; +extern struct platform_device pxa25x_device_pwm0; +extern struct platform_device pxa25x_device_pwm1; +extern struct platform_device pxa27x_device_pwm0; +extern struct platform_device pxa27x_device_pwm1; + void __init pxa_register_device(struct platform_device *dev, void *data); diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c new file mode 100644 index 000000000000..70fb3ca6a058 --- /dev/null +++ b/arch/arm/mach-pxa/pwm.c @@ -0,0 +1,299 @@ +/* + * linux/arch/arm/mach-pxa/pwm.c + * + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 2008-02-13 initial version + * eric miao + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* PWM registers and bits definitions */ +#define PWMCR (0x00) +#define PWMDCR (0x04) +#define PWMPCR (0x08) + +#define PWMCR_SD (1 << 6) +#define PWMDCR_FD (1 << 10) + +struct pwm_device { + struct list_head node; + struct platform_device *pdev; + + const char *label; + struct clk *clk; + void __iomem *mmio_base; + + unsigned int use_count; + unsigned int pwm_id; +}; + +/* + * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + */ +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + unsigned long long c; + unsigned long period_cycles, prescale, pv, dc; + + if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) + return -EINVAL; + + c = clk_get_rate(pwm->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 0) + period_cycles = 1; + prescale = (period_cycles - 1) / 1024; + pv = period_cycles / (prescale + 1) - 1; + + if (prescale > 63) + return -EINVAL; + + if (duty_ns == period_ns) + dc = PWMDCR_FD; + else + dc = (pv + 1) * duty_ns / period_ns; + + /* NOTE: the clock to PWM has to be enabled first + * before writing to the registers + */ + clk_enable(pwm->clk); + __raw_writel(prescale, pwm->mmio_base + PWMCR); + __raw_writel(dc, pwm->mmio_base + PWMDCR); + __raw_writel(pv, pwm->mmio_base + PWMPCR); + clk_disable(pwm->clk); + + return 0; +} +EXPORT_SYMBOL(pwm_config); + +int pwm_enable(struct pwm_device *pwm) +{ + return clk_enable(pwm->clk); +} +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + clk_disable(pwm->clk); +} +EXPORT_SYMBOL(pwm_disable); + +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_list); + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + struct pwm_device *pwm; + int found = 0; + + mutex_lock(&pwm_lock); + + list_for_each_entry(pwm, &pwm_list, node) { + if (pwm->pwm_id == pwm_id && pwm->use_count == 0) { + pwm->use_count++; + pwm->label = label; + found = 1; + break; + } + } + + mutex_unlock(&pwm_lock); + + return (found) ? pwm : NULL; +} +EXPORT_SYMBOL(pwm_request); + +void pwm_free(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + + if (pwm->use_count) { + pwm->use_count--; + pwm->label = NULL; + } else + pr_warning("PWM device already freed\n"); + + mutex_unlock(&pwm_lock); +} +EXPORT_SYMBOL(pwm_free); + +static inline void __add_pwm(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + list_add_tail(&pwm->node, &pwm_list); + mutex_unlock(&pwm_lock); +} + +static struct pwm_device *pwm_probe(struct platform_device *pdev, + unsigned int pwm_id, struct pwm_device *parent_pwm) +{ + struct pwm_device *pwm; + struct resource *r; + int ret = 0; + + pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); + if (pwm == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return ERR_PTR(-ENOMEM); + } + + pwm->clk = clk_get(&pdev->dev, "PWMCLK"); + if (IS_ERR(pwm->clk)) { + ret = PTR_ERR(pwm->clk); + goto err_free; + } + + pwm->use_count = 0; + pwm->pwm_id = pwm_id; + pwm->pdev = pdev; + + if (parent_pwm != NULL) { + /* registers for the second PWM has offset of 0x10 */ + pwm->mmio_base = parent_pwm->mmio_base + 0x10; + __add_pwm(pwm); + return pwm; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + if (r == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + if (pwm->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + __add_pwm(pwm); + platform_set_drvdata(pdev, pwm); + return pwm; + +err_free_mem: + release_mem_region(r->start, r->end - r->start + 1); +err_free_clk: + clk_put(pwm->clk); +err_free: + kfree(pwm); + return ERR_PTR(ret); +} + +static int __devinit pxa25x_pwm_probe(struct platform_device *pdev) +{ + struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL); + + if (IS_ERR(pwm)) + return PTR_ERR(pwm); + + return 0; +} + +static int __devinit pxa27x_pwm_probe(struct platform_device *pdev) +{ + struct pwm_device *pwm; + + pwm = pwm_probe(pdev, pdev->id * 2, NULL); + if (IS_ERR(pwm)) + return PTR_ERR(pwm); + + pwm = pwm_probe(pdev, pdev->id * 2 + 1, pwm); + if (IS_ERR(pwm)) + return PTR_ERR(pwm); + + return 0; +} + +static int __devexit pwm_remove(struct platform_device *pdev) +{ + struct pwm_device *pwm; + struct resource *r; + + pwm = platform_get_drvdata(pdev); + if (pwm == NULL) + return -ENODEV; + + mutex_lock(&pwm_lock); + list_del(&pwm->node); + mutex_unlock(&pwm_lock); + + iounmap(pwm->mmio_base); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, r->end - r->start + 1); + + clk_put(pwm->clk); + kfree(pwm); + return 0; +} + +static struct platform_driver pxa25x_pwm_driver = { + .driver = { + .name = "pxa25x-pwm", + }, + .probe = pxa25x_pwm_probe, + .remove = __devexit_p(pwm_remove), +}; + +static struct platform_driver pxa27x_pwm_driver = { + .driver = { + .name = "pxa27x-pwm", + }, + .probe = pxa27x_pwm_probe, + .remove = __devexit_p(pwm_remove), +}; + +static int __init pwm_init(void) +{ + int ret = 0; + + ret = platform_driver_register(&pxa25x_pwm_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa25x_pwm_driver\n"); + return ret; + } + + ret = platform_driver_register(&pxa27x_pwm_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa27x_pwm_driver\n"); + return ret; + } + + return ret; +} +arch_initcall(pwm_init); + +static void __exit pwm_exit(void) +{ + platform_driver_unregister(&pxa25x_pwm_driver); + platform_driver_unregister(&pxa27x_pwm_driver); +} +module_exit(pwm_exit); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index e5b417d14bb0..2bed3f98d41c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -129,12 +129,12 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev), INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), + INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev), + INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev), INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), /* - INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), - INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), */ INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), @@ -269,6 +269,8 @@ static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_ssp, &pxa25x_device_nssp, &pxa25x_device_assp, + &pxa25x_device_pwm0, + &pxa25x_device_pwm1, }; static struct sys_device pxa25x_sysdev[] = { diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e945836e129..bc2e80f69673 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -157,12 +157,13 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev), + INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev), INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL), /* - INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), @@ -363,6 +364,8 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_ssp1, &pxa27x_device_ssp2, &pxa27x_device_ssp3, + &pxa27x_device_pwm0, + &pxa27x_device_pwm1, }; static struct sys_device pxa27x_sysdev[] = { diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 644550bfa330..0f717df1fdb2 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -239,6 +239,8 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev), + PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev), + PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev), PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev), PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev), @@ -530,6 +532,8 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_ssp2, &pxa27x_device_ssp3, &pxa3xx_device_ssp4, + &pxa27x_device_pwm0, + &pxa27x_device_pwm1, }; static struct sys_device pxa3xx_sysdev[] = { -- cgit v1.2.1 From 02a8e76979f9b439642e67955edb865c112926f6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 17:15:32 +0100 Subject: [ARM] pxa: corgibl_limit_intensity build errors If CONFIG_BACKLIGHT_CORGI is not selected, then corgibl_limit_intensity() is not present. However, both corgi_pm.c and sharp_pm.c reference this symbol, resulting in a link error. Wrap the references with the relevant ifdefs, and avoid the resulting NULL pointer dereference by making the code in sharpsl_pm.c also conditional on the config symbol. Signed-off-by: Russell King --- arch/arm/common/sharpsl_pm.c | 2 ++ arch/arm/mach-pxa/corgi_pm.c | 2 ++ arch/arm/mach-pxa/spitz_pm.c | 2 ++ 3 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 5bba5255b119..5736c987c80d 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -157,6 +157,7 @@ static void sharpsl_battery_thread(struct work_struct *private_) dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); +#ifdef CONFIG_BACKLIGHT_CORGI /* If battery is low. limit backlight intensity to save power. */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || @@ -169,6 +170,7 @@ static void sharpsl_battery_thread(struct work_struct *private_) sharpsl_pm.machinfo->backlight_limit(0); sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; } +#endif /* Suspend if critical battery level */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 0a85f706e887..ae91c4b1135c 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -204,7 +204,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .read_devdata = corgipm_read_devdata, .charger_wakeup = corgi_charger_wakeup, .should_wakeup = corgi_should_wakeup, +#ifdef CONFIG_BACKLIGHT_CORGI .backlight_limit = corgibl_limit_intensity, +#endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH, diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 23f050feb208..48396f4eb265 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -207,7 +207,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .read_devdata = spitzpm_read_devdata, .charger_wakeup = spitz_charger_wakeup, .should_wakeup = spitz_should_wakeup, +#ifdef CONFIG_BACKLIGHT_CORGI .backlight_limit = corgibl_limit_intensity, +#endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH, -- cgit v1.2.1 From 284d115ec9b70d7c38752d10ad393a198db07a4b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 17:32:16 +0100 Subject: [ARM] pxa: separate PXA25x and PXA27x UDC register definitions The PXA25x and PXA27x USB device controller register definitions are different. Currently, they live side by side in pxa-regs.h, but only one set is available depending on the setting of PXA25x or PXA27x. This means that if we build to support both PXA25x and PXA27x, the PXA27x definitions are unavailable, even to PXA27x specific code. Remove these definitions from pxa-regs.h, and place them in separate files. Include these files where appropriate. Note: according to the dependencies in drivers/usb/gadget/Kconfig, we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the platform devices from pxa27x.c and pxa3xx.c. Signed-off-by: Russell King --- arch/arm/mach-pxa/em-x270.c | 1 + arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index edc4f07a230d..1269ac991505 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e945836e129..cdaf573e0f17 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -353,7 +353,7 @@ void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { - &pxa_device_udc, +/* &pxa_device_udc, The UDC driver is PXA25x only */ &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 644550bfa330..7fbe78649dad 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -520,7 +520,7 @@ void __init pxa3xx_init_irq(void) */ static struct platform_device *devices[] __initdata = { - &pxa_device_udc, +/* &pxa_device_udc, The UDC driver is PXA25x only */ &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, -- cgit v1.2.1 From b9ada4281c48076bdb252813be24ddb57e17cade Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 20 May 2008 11:01:08 +0100 Subject: x86: reinstate numa remap for SPARSEMEM on x86 NUMA systems Recent kernels have been panic'ing trying to allocate memory early in boot, in __alloc_pages: BUG: unable to handle kernel paging request at 00001568 IP: [] __alloc_pages+0x33/0x2cc *pdpt = 00000000013a5001 *pde = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.25 #78) EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at __alloc_pages+0x33/0x2cc EAX: 00001564 EBX: 000412d0 ECX: 00001564 EDX: 000005c3 ESI: f78012a0 EDI: 00000001 EBP: 00001564 ESP: f7871e50 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f7870000 task=f786f670 task.ti=f7870000) Stack: 00000000 f786f670 00000010 00000000 0000b700 000412d0 f78012a0 00000001 00000000 c105b64d 00000000 000412d0 f78012a0 f7803120 00000000 c105c1c5 00000010 f7803144 000412d0 00000001 f7803130 f7803120 f78012a0 00000001 Call Trace: [] kmem_getpages+0x94/0x129 [] cache_grow+0x8f/0x123 [] ____cache_alloc_node+0xb9/0xe4 [] kmem_cache_alloc_node+0x92/0xd2 [] build_sched_domains+0x536/0x70d [] do_flush_tlb_all+0x0/0x3f [] do_flush_tlb_all+0x0/0x3f [] interleave_nodes+0x23/0x5a [] alternate_node_alloc+0x43/0x5b [] arch_init_sched_domains+0x46/0x51 [] kernel_init+0x0/0x82 [] sched_init_smp+0x10/0xbb [] kernel_init+0x43/0x82 [] kernel_thread_helper+0x7/0x10 Debugging this showed that the NODE_DATA() for nodes other than node 0 were all NULL. Tracing this back showed that the NODE_DATA() pointers were being initialised to each nodes remap space. However under SPARSEMEM remap is disabled which leads to the pgdat's being placed incorrectly at kernel virtual address 0. Leading to the panic when attempting to allocate memory from these nodes. Numa remap was disabled in the commit below. This occured while fixing problems triggered when attempting to boot x86_32 NUMA SPARSEMEM kernels on non-numa hardware. x86: make NUMA work on 32-bit commit 1b000a5dbeb2f34bc03d45ebdf3f6d24a60c3aed The real problem is believed to be related to other alignment issues in the regions blocked out from the bootmem allocator for small memory systems, and has been fixed separately. Therefore re-enable remap for SPARSMEM, which fixes pgdat allocation issues. Testing confirms that SPARSMEM NUMA kernels will boot correctly with this part of the change reverted. Signed-off-by: Andy Whitcroft Acked-by: Mel Gorman Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 34 ++++++---------------------------- 1 file changed, 6 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf983687..026201f143a8 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -164,16 +164,13 @@ static void __init allocate_pgdat(int nid) } } -#ifdef CONFIG_DISCONTIGMEM /* - * In the discontig memory model, a portion of the kernel virtual area (KVA) - * is reserved and portions of nodes are mapped using it. This is to allow - * node-local memory to be allocated for structures that would normally require - * ZONE_NORMAL. The memory is allocated with alloc_remap() and callers - * should be prepared to allocate from the bootmem allocator instead. This KVA - * mechanism is incompatible with SPARSEMEM as it makes assumptions about the - * layout of memory that are broken if alloc_remap() succeeds for some of the - * map and fails for others + * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel + * virtual address space (KVA) is reserved and portions of nodes are mapped + * using it. This is to allow node-local memory to be allocated for + * structures that would normally require ZONE_NORMAL. The memory is + * allocated with alloc_remap() and callers should be prepared to allocate + * from the bootmem allocator instead. */ static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; @@ -290,25 +287,6 @@ static void init_remap_allocator(int nid) (ulong) pfn_to_kaddr(highstart_pfn + node_remap_offset[nid] + node_remap_size[nid])); } -#else -void *alloc_remap(int nid, unsigned long size) -{ - return NULL; -} - -static unsigned long calculate_numa_remap_pages(void) -{ - return 0; -} - -static void init_remap_allocator(int nid) -{ -} - -void __init remap_numa_kva(void) -{ -} -#endif /* CONFIG_DISCONTIGMEM */ extern void setup_bootmem_allocator(void); unsigned long __init setup_memory(void) -- cgit v1.2.1 From 84d6bd0e272e6eace1e7e4c501f32bddfb665bb2 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 20 May 2008 11:01:19 +0100 Subject: x86: cope with no remap space being allocated for a numa node When allocating the pgdat's for numa nodes on x86_32 we attempt to place them in the numa remap space for that node. However should the node not have any remap space allocated (such as due to having non-ram pages in the remap location in the node) then we will incorrectly place the pgdat at zero. Check we have remap available, falling back to node 0 memory where we do not. Signed-off-by: Andy Whitcroft Acked-by: Mel Gorman Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 026201f143a8..435c343c14bc 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -156,7 +156,7 @@ static void __init propagate_e820_map_node(int nid) */ static void __init allocate_pgdat(int nid) { - if (nid && node_has_online_mem(nid)) + if (nid && node_has_online_mem(nid) && node_remap_start_vaddr[nid]) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); -- cgit v1.2.1 From 0abbc78a0137fee60ef092f0b20a3d3d7e7e0cc2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 20 May 2008 16:27:17 +0200 Subject: x86, aperture_64: use symbolic constants Factor-out common aperture_valid code. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 02f4dbaa4df4..5373f7834d8a 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -109,27 +109,6 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) -{ - if (!aper_base) - return 0; - - if (aper_base + aper_size > 0x100000000UL) { - printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - if (aper_size < min_size) { - printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", - aper_size>>20, min_size>>20); - return 0; - } - - return 1; -} /* Find a PCI capability */ static __u32 __init find_cap(int bus, int slot, int func, int cap) @@ -344,7 +323,7 @@ out: if (gart_fix_e820 && !fix && aper_enabled) { if (!e820_all_mapped(aper_base, aper_base + aper_size, E820_RESERVED)) { - /* reserved it, so we can resuse it in second kernel */ + /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); update_e820(); -- cgit v1.2.1 From a190901c6b5f1f4a31681e8c69d811a4f9426e2b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:08:36 +0100 Subject: [RTC] rtc-pl030: add driver, remove old non-rtc lib driver Convert Integrator PL030 RTC driver to use the RTC class interfaces. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- arch/arm/mach-integrator/Makefile | 2 +- arch/arm/mach-integrator/time.c | 223 -------------------------------------- 2 files changed, 1 insertion(+), 224 deletions(-) delete mode 100644 arch/arm/mach-integrator/time.c (limited to 'arch') diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 158daaf9e3b0..6a5ef8d30b10 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := clock.o core.o lm.o time.o +obj-y := clock.o core.o lm.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c deleted file mode 100644 index 8508a0db3eaf..000000000000 --- a/arch/arm/mach-integrator/time.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#define RTC_DR (0) -#define RTC_MR (4) -#define RTC_STAT (8) -#define RTC_EOI (8) -#define RTC_LR (12) -#define RTC_CR (16) -#define RTC_CR_MIE (1 << 0) - -extern int (*set_rtc)(void); -static void __iomem *rtc_base; - -static int integrator_set_rtc(void) -{ - __raw_writel(xtime.tv_sec, rtc_base + RTC_LR); - return 1; -} - -static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm) -{ - rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time); - return 0; -} - -static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm) -{ - unsigned long time; - int ret; - - /* - * At the moment, we can only deal with non-wildcarded alarm times. - */ - ret = rtc_valid_tm(&alrm->time); - if (ret == 0) - ret = rtc_tm_to_time(&alrm->time, &time); - if (ret == 0) - writel(time, rtc_base + RTC_MR); - return ret; -} - -static int integrator_rtc_read_time(struct rtc_time *tm) -{ - rtc_time_to_tm(readl(rtc_base + RTC_DR), tm); - return 0; -} - -/* - * Set the RTC time. Unfortunately, we can't accurately set - * the point at which the counter updates. - * - * Also, since RTC_LR is transferred to RTC_CR on next rising - * edge of the 1Hz clock, we must write the time one second - * in advance. - */ -static inline int integrator_rtc_set_time(struct rtc_time *tm) -{ - unsigned long time; - int ret; - - ret = rtc_tm_to_time(tm, &time); - if (ret == 0) - writel(time + 1, rtc_base + RTC_LR); - - return ret; -} - -static struct rtc_ops rtc_ops = { - .owner = THIS_MODULE, - .read_time = integrator_rtc_read_time, - .set_time = integrator_rtc_set_time, - .read_alarm = integrator_rtc_read_alarm, - .set_alarm = integrator_rtc_set_alarm, -}; - -static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id) -{ - writel(0, rtc_base + RTC_EOI); - return IRQ_HANDLED; -} - -static int rtc_probe(struct amba_device *dev, void *id) -{ - int ret; - - if (rtc_base) - return -EBUSY; - - ret = amba_request_regions(dev, NULL); - if (ret) - goto out; - - rtc_base = ioremap(dev->res.start, SZ_4K); - if (!rtc_base) { - ret = -ENOMEM; - goto res_out; - } - - __raw_writel(0, rtc_base + RTC_CR); - __raw_writel(0, rtc_base + RTC_EOI); - - xtime.tv_sec = __raw_readl(rtc_base + RTC_DR); - - /* note that 'dev' is merely used for irq disambiguation; - * it is not actually referenced in the irq handler - */ - ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED, - "rtc-pl030", dev); - if (ret) - goto map_out; - - ret = register_rtc(&rtc_ops); - if (ret) - goto irq_out; - - set_rtc = integrator_set_rtc; - return 0; - - irq_out: - free_irq(dev->irq[0], dev); - map_out: - iounmap(rtc_base); - rtc_base = NULL; - res_out: - amba_release_regions(dev); - out: - return ret; -} - -static int rtc_remove(struct amba_device *dev) -{ - set_rtc = NULL; - - writel(0, rtc_base + RTC_CR); - - free_irq(dev->irq[0], dev); - unregister_rtc(&rtc_ops); - - iounmap(rtc_base); - rtc_base = NULL; - amba_release_regions(dev); - - return 0; -} - -static struct timespec rtc_delta; - -static int rtc_suspend(struct amba_device *dev, pm_message_t state) -{ - struct timespec rtc; - - rtc.tv_sec = readl(rtc_base + RTC_DR); - rtc.tv_nsec = 0; - save_time_delta(&rtc_delta, &rtc); - - return 0; -} - -static int rtc_resume(struct amba_device *dev) -{ - struct timespec rtc; - - rtc.tv_sec = readl(rtc_base + RTC_DR); - rtc.tv_nsec = 0; - restore_time_delta(&rtc_delta, &rtc); - - return 0; -} - -static struct amba_id rtc_ids[] = { - { - .id = 0x00041030, - .mask = 0x000fffff, - }, - { 0, 0 }, -}; - -static struct amba_driver rtc_driver = { - .drv = { - .name = "rtc-pl030", - }, - .probe = rtc_probe, - .remove = rtc_remove, - .suspend = rtc_suspend, - .resume = rtc_resume, - .id_table = rtc_ids, -}; - -static int __init integrator_rtc_init(void) -{ - return amba_driver_register(&rtc_driver); -} - -static void __exit integrator_rtc_exit(void) -{ - amba_driver_unregister(&rtc_driver); -} - -module_init(integrator_rtc_init); -module_exit(integrator_rtc_exit); -- cgit v1.2.1 From bedd78ca786c1d18c2a2785c7e40593dc9c9870f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:31:29 +0100 Subject: [RTC] remove old ARM rtc library code Now that all drivers using it are gone, remove the old ARM RTC library. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- arch/arm/common/Makefile | 1 - arch/arm/common/rtctime.c | 434 ---------------------------------------------- 2 files changed, 435 deletions(-) delete mode 100644 arch/arm/common/rtctime.c (limited to 'arch') diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 3d0b9fa42f84..325e4b6a6afb 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -2,7 +2,6 @@ # Makefile for the linux kernel. # -obj-y += rtctime.o obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o obj-$(CONFIG_ICST525) += icst525.o diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c deleted file mode 100644 index aa8f7739c822..000000000000 --- a/arch/arm/common/rtctime.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * linux/arch/arm/common/rtctime.c - * - * Copyright (C) 2003 Deep Blue Solutions Ltd. - * Based on sa1100-rtc.c, Nils Faerber, CIH, Nicolas Pitre. - * Based on rtc.c by Paul Gortmaker - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static DECLARE_WAIT_QUEUE_HEAD(rtc_wait); -static struct fasync_struct *rtc_async_queue; - -/* - * rtc_lock protects rtc_irq_data - */ -static DEFINE_SPINLOCK(rtc_lock); -static unsigned long rtc_irq_data; - -/* - * rtc_sem protects rtc_inuse and rtc_ops - */ -static DEFINE_MUTEX(rtc_mutex); -static unsigned long rtc_inuse; -static struct rtc_ops *rtc_ops; - -#define rtc_epoch 1900UL - -/* - * Calculate the next alarm time given the requested alarm time mask - * and the current time. - */ -void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) -{ - unsigned long next_time; - unsigned long now_time; - - next->tm_year = now->tm_year; - next->tm_mon = now->tm_mon; - next->tm_mday = now->tm_mday; - next->tm_hour = alrm->tm_hour; - next->tm_min = alrm->tm_min; - next->tm_sec = alrm->tm_sec; - - rtc_tm_to_time(now, &now_time); - rtc_tm_to_time(next, &next_time); - - if (next_time < now_time) { - /* Advance one day */ - next_time += 60 * 60 * 24; - rtc_time_to_tm(next_time, next); - } -} -EXPORT_SYMBOL(rtc_next_alarm_time); - -static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm) -{ - memset(tm, 0, sizeof(struct rtc_time)); - return ops->read_time(tm); -} - -static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm) -{ - int ret; - - ret = rtc_valid_tm(tm); - if (ret == 0) - ret = ops->set_time(tm); - - return ret; -} - -static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) -{ - int ret = -EINVAL; - if (ops->read_alarm) { - memset(alrm, 0, sizeof(struct rtc_wkalrm)); - ret = ops->read_alarm(alrm); - } - return ret; -} - -static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) -{ - int ret = -EINVAL; - if (ops->set_alarm) - ret = ops->set_alarm(alrm); - return ret; -} - -void rtc_update(unsigned long num, unsigned long events) -{ - spin_lock(&rtc_lock); - rtc_irq_data = (rtc_irq_data + (num << 8)) | events; - spin_unlock(&rtc_lock); - - wake_up_interruptible(&rtc_wait); - kill_fasync(&rtc_async_queue, SIGIO, POLL_IN); -} -EXPORT_SYMBOL(rtc_update); - - -static ssize_t -rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) -{ - DECLARE_WAITQUEUE(wait, current); - unsigned long data; - ssize_t ret; - - if (count < sizeof(unsigned long)) - return -EINVAL; - - add_wait_queue(&rtc_wait, &wait); - do { - __set_current_state(TASK_INTERRUPTIBLE); - - spin_lock_irq(&rtc_lock); - data = rtc_irq_data; - rtc_irq_data = 0; - spin_unlock_irq(&rtc_lock); - - if (data != 0) { - ret = 0; - break; - } - if (file->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - break; - } - if (signal_pending(current)) { - ret = -ERESTARTSYS; - break; - } - schedule(); - } while (1); - set_current_state(TASK_RUNNING); - remove_wait_queue(&rtc_wait, &wait); - - if (ret == 0) { - ret = put_user(data, (unsigned long __user *)buf); - if (ret == 0) - ret = sizeof(unsigned long); - } - return ret; -} - -static unsigned int rtc_poll(struct file *file, poll_table *wait) -{ - unsigned long data; - - poll_wait(file, &rtc_wait, wait); - - spin_lock_irq(&rtc_lock); - data = rtc_irq_data; - spin_unlock_irq(&rtc_lock); - - return data != 0 ? POLLIN | POLLRDNORM : 0; -} - -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_ops *ops = file->private_data; - struct rtc_time tm; - struct rtc_wkalrm alrm; - void __user *uarg = (void __user *)arg; - int ret = -EINVAL; - - switch (cmd) { - case RTC_ALM_READ: - ret = rtc_arm_read_alarm(ops, &alrm); - if (ret) - break; - ret = copy_to_user(uarg, &alrm.time, sizeof(tm)); - if (ret) - ret = -EFAULT; - break; - - case RTC_ALM_SET: - ret = copy_from_user(&alrm.time, uarg, sizeof(tm)); - if (ret) { - ret = -EFAULT; - break; - } - alrm.enabled = 0; - alrm.pending = 0; - alrm.time.tm_mday = -1; - alrm.time.tm_mon = -1; - alrm.time.tm_year = -1; - alrm.time.tm_wday = -1; - alrm.time.tm_yday = -1; - alrm.time.tm_isdst = -1; - ret = rtc_arm_set_alarm(ops, &alrm); - break; - - case RTC_RD_TIME: - ret = rtc_arm_read_time(ops, &tm); - if (ret) - break; - ret = copy_to_user(uarg, &tm, sizeof(tm)); - if (ret) - ret = -EFAULT; - break; - - case RTC_SET_TIME: - if (!capable(CAP_SYS_TIME)) { - ret = -EACCES; - break; - } - ret = copy_from_user(&tm, uarg, sizeof(tm)); - if (ret) { - ret = -EFAULT; - break; - } - ret = rtc_arm_set_time(ops, &tm); - break; - - case RTC_EPOCH_SET: -#ifndef rtc_epoch - /* - * There were no RTC clocks before 1900. - */ - if (arg < 1900) { - ret = -EINVAL; - break; - } - if (!capable(CAP_SYS_TIME)) { - ret = -EACCES; - break; - } - rtc_epoch = arg; - ret = 0; -#endif - break; - - case RTC_EPOCH_READ: - ret = put_user(rtc_epoch, (unsigned long __user *)uarg); - break; - - case RTC_WKALM_SET: - ret = copy_from_user(&alrm, uarg, sizeof(alrm)); - if (ret) { - ret = -EFAULT; - break; - } - ret = rtc_arm_set_alarm(ops, &alrm); - break; - - case RTC_WKALM_RD: - ret = rtc_arm_read_alarm(ops, &alrm); - if (ret) - break; - ret = copy_to_user(uarg, &alrm, sizeof(alrm)); - if (ret) - ret = -EFAULT; - break; - - default: - if (ops->ioctl) - ret = ops->ioctl(cmd, arg); - break; - } - return ret; -} - -static int rtc_open(struct inode *inode, struct file *file) -{ - int ret; - - mutex_lock(&rtc_mutex); - - if (rtc_inuse) { - ret = -EBUSY; - } else if (!rtc_ops || !try_module_get(rtc_ops->owner)) { - ret = -ENODEV; - } else { - file->private_data = rtc_ops; - - ret = rtc_ops->open ? rtc_ops->open() : 0; - if (ret == 0) { - spin_lock_irq(&rtc_lock); - rtc_irq_data = 0; - spin_unlock_irq(&rtc_lock); - - rtc_inuse = 1; - } - } - mutex_unlock(&rtc_mutex); - - return ret; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - struct rtc_ops *ops = file->private_data; - - if (ops->release) - ops->release(); - - spin_lock_irq(&rtc_lock); - rtc_irq_data = 0; - spin_unlock_irq(&rtc_lock); - - module_put(rtc_ops->owner); - rtc_inuse = 0; - - return 0; -} - -static int rtc_fasync(int fd, struct file *file, int on) -{ - return fasync_helper(fd, file, on, &rtc_async_queue); -} - -static const struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = rtc_read, - .poll = rtc_poll, - .ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, - .fasync = rtc_fasync, -}; - -static struct miscdevice rtc_miscdev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops, -}; - - -static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) -{ - struct rtc_ops *ops = data; - struct rtc_wkalrm alrm; - struct rtc_time tm; - char *p = page; - - if (rtc_arm_read_time(ops, &tm) == 0) { - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, - rtc_epoch); - } - - if (rtc_arm_read_alarm(ops, &alrm) == 0) { - p += sprintf(p, "alrm_time\t: "); - if ((unsigned int)alrm.time.tm_hour <= 24) - p += sprintf(p, "%02d:", alrm.time.tm_hour); - else - p += sprintf(p, "**:"); - if ((unsigned int)alrm.time.tm_min <= 59) - p += sprintf(p, "%02d:", alrm.time.tm_min); - else - p += sprintf(p, "**:"); - if ((unsigned int)alrm.time.tm_sec <= 59) - p += sprintf(p, "%02d\n", alrm.time.tm_sec); - else - p += sprintf(p, "**\n"); - - p += sprintf(p, "alrm_date\t: "); - if ((unsigned int)alrm.time.tm_year <= 200) - p += sprintf(p, "%04d-", alrm.time.tm_year + 1900); - else - p += sprintf(p, "****-"); - if ((unsigned int)alrm.time.tm_mon <= 11) - p += sprintf(p, "%02d-", alrm.time.tm_mon + 1); - else - p += sprintf(p, "**-"); - if ((unsigned int)alrm.time.tm_mday <= 31) - p += sprintf(p, "%02d\n", alrm.time.tm_mday); - else - p += sprintf(p, "**\n"); - p += sprintf(p, "alrm_wakeup\t: %s\n", - alrm.enabled ? "yes" : "no"); - p += sprintf(p, "alrm_pending\t: %s\n", - alrm.pending ? "yes" : "no"); - } - - if (ops->proc) - p += ops->proc(p); - - return p - page; -} - -int register_rtc(struct rtc_ops *ops) -{ - int ret = -EBUSY; - - mutex_lock(&rtc_mutex); - if (rtc_ops == NULL) { - rtc_ops = ops; - - ret = misc_register(&rtc_miscdev); - if (ret == 0) - create_proc_read_entry("driver/rtc", 0, NULL, - rtc_read_proc, ops); - } - mutex_unlock(&rtc_mutex); - - return ret; -} -EXPORT_SYMBOL(register_rtc); - -void unregister_rtc(struct rtc_ops *rtc) -{ - mutex_lock(&rtc_mutex); - if (rtc == rtc_ops) { - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&rtc_miscdev); - rtc_ops = NULL; - } - mutex_unlock(&rtc_mutex); -} -EXPORT_SYMBOL(unregister_rtc); -- cgit v1.2.1 From 0748aca6f0af917591dcfd70dccac770a25d4f71 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 13 May 2008 10:34:20 +0200 Subject: x86: remove useless static current_tsc_khz variable current_tsc_khz is just written by the init code and never used again. Remove it. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/tsc_32.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index e4790728b224..d53b1040cbb7 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -283,7 +283,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ -static unsigned long current_tsc_khz; static struct clocksource clocksource_tsc; /* @@ -434,9 +433,8 @@ void __init tsc_init(void) unsynchronized_tsc(); check_geode_tsc_reliable(); - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) { clocksource_tsc.rating = 0; -- cgit v1.2.1 From 3843fc2575e3389f4f0ad0420a720240a5746a5d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 9 May 2008 12:05:57 +0100 Subject: xen: remove support for non-PAE 32-bit Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/xen/Kconfig | 2 +- arch/x86/xen/enlighten.c | 51 +++++++++++++++++------------------------------- arch/x86/xen/mmu.c | 19 ++---------------- arch/x86/xen/mmu.h | 24 ++++++----------------- arch/x86/xen/xen-head.S | 4 ---- 5 files changed, 27 insertions(+), 73 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 2e641be2737e..525b108411bd 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -6,7 +6,7 @@ config XEN bool "Xen guest support" select PARAVIRT depends on X86_32 - depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) + depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER) help This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e457d61..a05b7721bc81 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -785,38 +785,35 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) static __init void xen_pagetable_setup_start(pgd_t *base) { pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base; + int i; /* special set_pte for pagetable initialization */ pv_mmu_ops.set_pte = xen_set_pte_init; init_mm.pgd = base; /* - * copy top-level of Xen-supplied pagetable into place. For - * !PAE we can use this as-is, but for PAE it is a stand-in - * while we copy the pmd pages. + * copy top-level of Xen-supplied pagetable into place. This + * is a stand-in while we copy the pmd pages. */ memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - if (PTRS_PER_PMD > 1) { - int i; - /* - * For PAE, need to allocate new pmds, rather than - * share Xen's, since Xen doesn't like pmd's being - * shared between address spaces. - */ - for (i = 0; i < PTRS_PER_PGD; i++) { - if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { - pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); + /* + * For PAE, need to allocate new pmds, rather than + * share Xen's, since Xen doesn't like pmd's being + * shared between address spaces. + */ + for (i = 0; i < PTRS_PER_PGD; i++) { + if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { + pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); - memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), - PAGE_SIZE); + memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), + PAGE_SIZE); - make_lowmem_page_readonly(pmd); + make_lowmem_page_readonly(pmd); - set_pgd(&base[i], __pgd(1 + __pa(pmd))); - } else - pgd_clear(&base[i]); - } + set_pgd(&base[i], __pgd(1 + __pa(pmd))); + } else + pgd_clear(&base[i]); } /* make sure zero_page is mapped RO so we can use it in pagetables */ @@ -873,17 +870,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ - { - unsigned level; - -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - pin_pagetable_pfn(level, PFN_DOWN(__pa(base))); - } + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } /* This is called once we have the cpu_possible_map */ @@ -1093,7 +1080,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pte = xen_make_pte, .make_pgd = xen_make_pgd, -#ifdef CONFIG_X86_PAE .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, .set_pud = xen_set_pud, @@ -1102,7 +1088,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pmd = xen_make_pmd, .pmd_val = xen_pmd_val, -#endif /* PAE */ .activate_mm = xen_activate_mm, .dup_mmap = xen_dup_mmap, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 126766d43aea..07c2653ec335 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -222,7 +222,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; return ret; } -#ifdef CONFIG_X86_PAE + void xen_set_pud(pud_t *ptr, pud_t val) { struct multicall_space mcs; @@ -272,12 +272,6 @@ pmd_t xen_make_pmd(pmdval_t pmd) return native_make_pmd(pmd); } -#else /* !PAE */ -void xen_set_pte(pte_t *ptep, pte_t pte) -{ - *ptep = pte; -} -#endif /* CONFIG_X86_PAE */ /* (Yet another) pagetable walker. This one is intended for pinning a @@ -430,8 +424,6 @@ static int pin_page(struct page *page, enum pt_level level) read-only, and can be pinned. */ void xen_pgd_pin(pgd_t *pgd) { - unsigned level; - xen_mc_batch(); if (pgd_walk(pgd, pin_page, TASK_SIZE)) { @@ -441,14 +433,7 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_batch(); } -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - xen_do_pin(level, PFN_DOWN(__pa(pgd))); - + xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); xen_mc_issue(0); } diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index b5e189b1519d..5fe961caffd4 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -37,14 +37,13 @@ void xen_exit_mmap(struct mm_struct *mm); void xen_pgd_pin(pgd_t *pgd); //void xen_pgd_unpin(pgd_t *pgd); -#ifdef CONFIG_X86_PAE -unsigned long long xen_pte_val(pte_t); -unsigned long long xen_pmd_val(pmd_t); -unsigned long long xen_pgd_val(pgd_t); +pteval_t xen_pte_val(pte_t); +pmdval_t xen_pmd_val(pmd_t); +pgdval_t xen_pgd_val(pgd_t); -pte_t xen_make_pte(unsigned long long); -pmd_t xen_make_pmd(unsigned long long); -pgd_t xen_make_pgd(unsigned long long); +pte_t xen_make_pte(pteval_t); +pmd_t xen_make_pmd(pmdval_t); +pgd_t xen_make_pgd(pgdval_t); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); @@ -53,15 +52,4 @@ void xen_set_pud(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); - -#else -unsigned long xen_pte_val(pte_t); -unsigned long xen_pmd_val(pmd_t); -unsigned long xen_pgd_val(pgd_t); - -pte_t xen_make_pte(unsigned long); -pmd_t xen_make_pmd(unsigned long); -pgd_t xen_make_pgd(unsigned long); -#endif - #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 288d587ce73c..2ab5f42f34d8 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -30,11 +30,7 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen) ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") -#ifdef CONFIG_X86_PAE ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") -#else - ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no") -#endif ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") #endif /*CONFIG_XEN */ -- cgit v1.2.1 From b478458aeebfc55fe409abec43794ac72a623c79 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:39 +0200 Subject: x86: avoid re-loading LDT in unrelated address spaces Performance optimization. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ldt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 0224c3637c73..21f2bae98c15 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -20,9 +20,9 @@ #include #ifdef CONFIG_SMP -static void flush_ldt(void *null) +static void flush_ldt(void *current_mm) { - if (current->active_mm) + if (current->active_mm == current_mm) load_LDT(¤t->active_mm->context); } #endif @@ -68,7 +68,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) load_LDT(pc); mask = cpumask_of_cpu(smp_processor_id()); if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); + smp_call_function(flush_ldt, current->mm, 1, 1); preempt_enable(); #else load_LDT(pc); -- cgit v1.2.1 From 873b274a41c0cfe58b2eb0a7722424eb367b905b Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 13:02:23 -0400 Subject: x86: Add Centaur and Transmeta CPUs to PAT whitelist Unconditionally enable PAT support on Centaur and Transmeta CPUs. All known models that advertise PAT have no known errata. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/addon_cpuid_features.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c2e1ce33c7cb..d8b3e4a9d663 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -62,6 +62,9 @@ void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) return; break; + case X86_VENDOR_CENTAUR: + case X86_VENDOR_TRANSMETA: + return; } pat_disable(cpu_has_pat ? -- cgit v1.2.1 From c3ed64295f0fed9131b42122234b1ce4a4a266cf Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Fri, 16 May 2008 10:44:39 -0700 Subject: x86: change maximum NR_CPUS to 4096 and MAX_NUMNODES to 512 * Change the range of NR_CPUS from 2-255 to 2-4096 and change the range of MAX_NUMNODES (NODES_SHIFT) from 1-32768 to 1-512. * Alter comment about how much each increment of NR_CPUS consumes. (This was found by configuring for 256 cpus and then 512 cpus and dividing the difference by 256.) Signed-off-by: Mike Travis Cc: Andrew Morton Cc: Dave Jones Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..bbafeac89116 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -565,18 +565,18 @@ config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB) config NR_CPUS - int "Maximum number of CPUs (2-255)" - range 2 255 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 default "8" help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 255 and the + kernel will support. The maximum supported value is 4096 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds - approximately eight kilobytes to the kernel image. + approximately one kilobyte to the kernel image. config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -968,8 +968,8 @@ config NUMA_EMU number of nodes. This is only useful for debugging. config NODES_SHIFT - int "Max num nodes shift(1-15)" - range 1 15 if X86_64 + int "Max num nodes shift(1-9)" + range 1 9 if X86_64 default "6" if X86_64 default "4" if X86_NUMAQ default "3" -- cgit v1.2.1 From 23adec554a7648f99c8acc0caf49c66320cd2b84 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:41 +0200 Subject: x86: add notrace annotations to vsyscall. Add the notrace annotations to the vsyscall functions - there we are not in kernel context yet, so the tracer function cannot (and must not) be called. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/vsyscall_64.c | 3 ++- arch/x86/vdso/vclock_gettime.c | 15 ++++++++------- arch/x86/vdso/vgetcpu.c | 3 ++- 3 files changed, 12 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 61efa2f7d564..4063dfa2a02d 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -42,7 +42,8 @@ #include #include -#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) +#define __vsyscall(nr) \ + __attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace #define __syscall_clobber "r11","cx","memory" /* diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index 23476c2ebfc4..5cb8f754c52d 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -23,7 +23,7 @@ #define gtod vdso_vsyscall_gtod_data -static long vdso_fallback_gettime(long clock, struct timespec *ts) +notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { long ret; asm("syscall" : "=a" (ret) : @@ -31,7 +31,7 @@ static long vdso_fallback_gettime(long clock, struct timespec *ts) return ret; } -static inline long vgetns(void) +notrace static inline long vgetns(void) { long v; cycles_t (*vread)(void); @@ -40,7 +40,7 @@ static inline long vgetns(void) return (v * gtod->clock.mult) >> gtod->clock.shift; } -static noinline int do_realtime(struct timespec *ts) +notrace static noinline int do_realtime(struct timespec *ts) { unsigned long seq, ns; do { @@ -54,7 +54,8 @@ static noinline int do_realtime(struct timespec *ts) } /* Copy of the version in kernel/time.c which we cannot directly access */ -static void vset_normalized_timespec(struct timespec *ts, long sec, long nsec) +notrace static void +vset_normalized_timespec(struct timespec *ts, long sec, long nsec) { while (nsec >= NSEC_PER_SEC) { nsec -= NSEC_PER_SEC; @@ -68,7 +69,7 @@ static void vset_normalized_timespec(struct timespec *ts, long sec, long nsec) ts->tv_nsec = nsec; } -static noinline int do_monotonic(struct timespec *ts) +notrace static noinline int do_monotonic(struct timespec *ts) { unsigned long seq, ns, secs; do { @@ -82,7 +83,7 @@ static noinline int do_monotonic(struct timespec *ts) return 0; } -int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) +notrace int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) { if (likely(gtod->sysctl_enabled && gtod->clock.vread)) switch (clock) { @@ -96,7 +97,7 @@ int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) int clock_gettime(clockid_t, struct timespec *) __attribute__((weak, alias("__vdso_clock_gettime"))); -int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) +notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) { long ret; if (likely(gtod->sysctl_enabled && gtod->clock.vread)) { diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c index c8097f17f8a9..9fbc6b20026b 100644 --- a/arch/x86/vdso/vgetcpu.c +++ b/arch/x86/vdso/vgetcpu.c @@ -13,7 +13,8 @@ #include #include "vextern.h" -long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) +notrace long +__vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) { unsigned int p; -- cgit v1.2.1 From 16444a8a40d4c7b4f6de34af0cae1f76a4f6c901 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 1 + arch/x86/kernel/entry_32.S | 27 +++++++++++++++++++++++++++ arch/x86/kernel/entry_64.S | 37 +++++++++++++++++++++++++++++++++++++ 3 files changed, 65 insertions(+) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..c742dfeb0dbe 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -23,6 +23,7 @@ config X86 select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_FTRACE select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc3271c..f47b9b5440d2 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1109,6 +1109,33 @@ ENDPROC(xen_failsafe_callback) #endif /* CONFIG_XEN */ +#ifdef CONFIG_FTRACE +ENTRY(mcount) + cmpl $ftrace_stub, ftrace_trace_function + jnz trace + +.globl ftrace_stub +ftrace_stub: + ret + + /* taken from glibc */ +trace: + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + + call *ftrace_trace_function + + popl %edx + popl %ecx + popl %eax + + jmp ftrace_stub +END(mcount) +#endif + .section .rodata,"a" #include "syscall_table_32.S" diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..f046e0c64883 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -54,6 +54,43 @@ .code64 +#ifdef CONFIG_FTRACE +ENTRY(mcount) + cmpq $ftrace_stub, ftrace_trace_function + jnz trace +.globl ftrace_stub +ftrace_stub: + retq + +trace: + /* taken from glibc */ + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + movq 8(%rbp), %rsi + + call *ftrace_trace_function + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + + jmp ftrace_stub +END(mcount) +#endif + #ifndef CONFIG_PREEMPT #define retint_kernel retint_restore_args #endif -- cgit v1.2.1 From 81d68a96a39844853b37f20cc8282d9b65b78ef3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: trace irq disabled critical timings This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: Ingo Molnar -------------------------------------------------------------------- latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= And this is a trace with ftrace_enabled == 1 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 -------------------------------------------------------------------- latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000]) swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000]) swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000]) swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47) swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50) swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000]) swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000]) swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process_64.c | 3 +++ arch/x86/lib/Makefile | 1 + arch/x86/lib/thunk_32.S | 47 ++++++++++++++++++++++++++++++++++++++++++++ arch/x86/lib/thunk_64.S | 19 ++++++++++++++++-- 4 files changed, 68 insertions(+), 2 deletions(-) create mode 100644 arch/x86/lib/thunk_32.S (limited to 'arch') diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index e2319f39988b..dd349c92f051 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -165,7 +165,10 @@ void cpu_idle(void) */ local_irq_disable(); enter_idle(); + /* Don't trace irqs off for idle */ + stop_critical_timings(); idle(); + start_critical_timings(); /* In many cases the interrupt that ended idle has already called exit_idle. But some idle loops can be woken up without interrupt. */ diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 76f60f52a885..84aa2883fe15 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_SMP) := msr-on-cpu.o lib-y := delay_$(BITS).o +lib-y += thunk_$(BITS).o lib-y += usercopy_$(BITS).o getuser_$(BITS).o putuser_$(BITS).o lib-y += memcpy_$(BITS).o diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/lib/thunk_32.S new file mode 100644 index 000000000000..650b11e00ecc --- /dev/null +++ b/arch/x86/lib/thunk_32.S @@ -0,0 +1,47 @@ +/* + * Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash) + * Copyright 2008 by Steven Rostedt, Red Hat, Inc + * (inspired by Andi Kleen's thunk_64.S) + * Subject to the GNU public license, v.2. No warranty of any kind. + */ + + #include + +#define ARCH_TRACE_IRQS_ON \ + pushl %eax; \ + pushl %ecx; \ + pushl %edx; \ + call trace_hardirqs_on; \ + popl %edx; \ + popl %ecx; \ + popl %eax; + +#define ARCH_TRACE_IRQS_OFF \ + pushl %eax; \ + pushl %ecx; \ + pushl %edx; \ + call trace_hardirqs_off; \ + popl %edx; \ + popl %ecx; \ + popl %eax; + +#ifdef CONFIG_TRACE_IRQFLAGS + /* put return address in eax (arg1) */ + .macro thunk_ra name,func + .globl \name +\name: + pushl %eax + pushl %ecx + pushl %edx + /* Place EIP in the arg1 */ + movl 3*4(%esp), %eax + call \func + popl %edx + popl %ecx + popl %eax + ret + .endm + + thunk_ra trace_hardirqs_on_thunk,trace_hardirqs_on_caller + thunk_ra trace_hardirqs_off_thunk,trace_hardirqs_off_caller +#endif diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S index e009251d4e9f..bf9a7d5a5428 100644 --- a/arch/x86/lib/thunk_64.S +++ b/arch/x86/lib/thunk_64.S @@ -2,6 +2,7 @@ * Save registers before calling assembly functions. This avoids * disturbance of register allocation in some inline assembly constructs. * Copyright 2001,2002 by Andi Kleen, SuSE Labs. + * Added trace_hardirqs callers - Copyright 2007 Steven Rostedt, Red Hat, Inc. * Subject to the GNU public license, v.2. No warranty of any kind. */ @@ -42,8 +43,22 @@ #endif #ifdef CONFIG_TRACE_IRQFLAGS - thunk trace_hardirqs_on_thunk,trace_hardirqs_on - thunk trace_hardirqs_off_thunk,trace_hardirqs_off + /* put return address in rdi (arg1) */ + .macro thunk_ra name,func + .globl \name +\name: + CFI_STARTPROC + SAVE_ARGS + /* SAVE_ARGS pushs 9 elements */ + /* the next element would be the rip */ + movq 9*8(%rsp), %rdi + call \func + jmp restore + CFI_ENDPROC + .endm + + thunk_ra trace_hardirqs_on_thunk,trace_hardirqs_on_caller + thunk_ra trace_hardirqs_off_thunk,trace_hardirqs_off_caller #endif #ifdef CONFIG_DEBUG_LOCK_ALLOC -- cgit v1.2.1 From 6cd8a4bb2f97527a9ceb30bc77ea4e959c6a95e3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: trace preempt off critical timings Add preempt off timings. A lot of kernel core code is taken from the RT patch latency trace that was written by Ingo Molnar. This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers Now instead of just tracing irqs off, preemption off can be selected to be recorded. When this is selected, it shares the same files as irqs off timings. One can either trace preemption off, irqs off, or one or the other off. By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording of preempt off only is performed. "irqsoff" will only record the time irqs are disabled, but "preemptirqsoff" will take the total time irqs or preemption are disabled. Runtime switching of these options is now supported by simpling echoing in the appropriate trace name into /debugfs/tracing/current_tracer. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process_32.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index f8476dfbb60d..a30aa1f2607a 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -185,7 +185,10 @@ void cpu_idle(void) local_irq_disable(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; + /* Don't trace irqs off for idle */ + stop_critical_timings(); idle(); + start_critical_timings(); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); -- cgit v1.2.1 From 3d0833953e1b98b79ddf491dd49229eef9baeac1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: dynamic enabling/disabling of function calls This patch adds a feature to dynamically replace the ftrace code with the jmps to allow a kernel with ftrace configured to run as fast as it can without it configured. The way this works, is on bootup (if ftrace is enabled), a ftrace function is registered to record the instruction pointer of all places that call the function. Later, if there's still any code to patch, a kthread is awoken (rate limited to at most once a second) that performs a stop_machine, and replaces all the code that was called with a jmp over the call to ftrace. It only replaces what was found the previous time. Typically the system reaches equilibrium quickly after bootup and there's no code patching needed at all. e.g. call ftrace /* 5 bytes */ is replaced with jmp 3f /* jmp is 2 bytes and we jump 3 forward */ 3: When we want to enable ftrace for function tracing, the IP recording is removed, and stop_machine is called again to replace all the locations of that were recorded back to the call of ftrace. When it is disabled, we replace the code back to the jmp. Allocation is done by the kthread. If the ftrace recording function is called, and we don't have any record slots available, then we simply skip that call. Once a second a new page (if needed) is allocated for recording new ftrace function calls. A large batch is allocated at boot up to get most of the calls there. Because we do this via stop_machine, we don't have to worry about another CPU executing a ftrace call as we modify it. But we do need to worry about NMI's so all functions that might be called via nmi must be annotated with notrace_nmi. When this code is configured in, the NMI code will not call notrace. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/ftrace.c | 237 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 238 insertions(+) create mode 100644 arch/x86/kernel/ftrace.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..e142091524b0 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c new file mode 100644 index 000000000000..5dd58136ef02 --- /dev/null +++ b/arch/x86/kernel/ftrace.c @@ -0,0 +1,237 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt + * + * Thanks goes to Ingo Molnar, for suggesting the idea. + * Mathieu Desnoyers, for suggesting postponing the modifications. + * Arjan van de Ven, for keeping me straight, and explaining to me + * the dangers of modifying code on the run. + */ + +#include +#include +#include +#include +#include +#include + +#define CALL_BACK 5 + +#define JMPFWD 0x03eb + +static unsigned short ftrace_jmp = JMPFWD; + +struct ftrace_record { + struct dyn_ftrace rec; + int failed; +} __attribute__((packed)); + +struct ftrace_page { + struct ftrace_page *next; + int index; + struct ftrace_record records[]; +} __attribute__((packed)); + +#define ENTRIES_PER_PAGE \ + ((PAGE_SIZE - sizeof(struct ftrace_page)) / sizeof(struct ftrace_record)) + +/* estimate from running different kernels */ +#define NR_TO_INIT 10000 + +#define MCOUNT_ADDR ((long)(&mcount)) + +union ftrace_code_union { + char code[5]; + struct { + char e8; + int offset; + } __attribute__((packed)); +}; + +static struct ftrace_page *ftrace_pages_start; +static struct ftrace_page *ftrace_pages; + +notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) +{ + struct ftrace_record *rec; + unsigned short save; + + ip -= CALL_BACK; + save = *(short *)ip; + + /* If this was already converted, skip it */ + if (save == JMPFWD) + return NULL; + + if (ftrace_pages->index == ENTRIES_PER_PAGE) { + if (!ftrace_pages->next) + return NULL; + ftrace_pages = ftrace_pages->next; + } + + rec = &ftrace_pages->records[ftrace_pages->index++]; + + return &rec->rec; +} + +static int notrace +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned short old = *(unsigned short *)old_code; + unsigned short new = *(unsigned short *)new_code; + unsigned short replaced; + int faulted = 0; + + /* + * Note: Due to modules and __init, code can + * disappear and change, we need to protect against faulting + * as well as code changing. + * + * No real locking needed, this code is run through + * kstop_machine. + */ + asm volatile ( + "1: lock\n" + " cmpxchg %w3, (%2)\n" + "2:\n" + ".section .fixup, \"ax\"\n" + " movl $1, %0\n" + "3: jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : "=r"(faulted), "=a"(replaced) + : "r"(ip), "r"(new), "0"(faulted), "a"(old) + : "memory"); + sync_core(); + + if (replaced != old) + faulted = 2; + + return faulted; +} + +static int notrace ftrace_calc_offset(long ip) +{ + return (int)(MCOUNT_ADDR - ip); +} + +notrace void ftrace_code_disable(struct dyn_ftrace *rec) +{ + unsigned long ip; + union ftrace_code_union save; + struct ftrace_record *r = + container_of(rec, struct ftrace_record, rec); + + ip = rec->ip; + + save.e8 = 0xe8; + save.offset = ftrace_calc_offset(ip); + + /* move the IP back to the start of the call */ + ip -= CALL_BACK; + + r->failed = ftrace_modify_code(ip, save.code, (char *)&ftrace_jmp); +} + +static void notrace ftrace_replace_code(int saved) +{ + unsigned char *new = NULL, *old = NULL; + struct ftrace_record *rec; + struct ftrace_page *pg; + unsigned long ip; + int i; + + if (saved) + old = (char *)&ftrace_jmp; + else + new = (char *)&ftrace_jmp; + + for (pg = ftrace_pages_start; pg; pg = pg->next) { + for (i = 0; i < pg->index; i++) { + union ftrace_code_union calc; + rec = &pg->records[i]; + + /* don't modify code that has already faulted */ + if (rec->failed) + continue; + + ip = rec->rec.ip; + + calc.e8 = 0xe8; + calc.offset = ftrace_calc_offset(ip); + + if (saved) + new = calc.code; + else + old = calc.code; + + ip -= CALL_BACK; + + rec->failed = ftrace_modify_code(ip, old, new); + } + } + +} + +notrace void ftrace_startup_code(void) +{ + ftrace_replace_code(1); +} + +notrace void ftrace_shutdown_code(void) +{ + ftrace_replace_code(0); +} + +notrace void ftrace_shutdown_replenish(void) +{ + if (ftrace_pages->next) + return; + + /* allocate another page */ + ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); +} + +notrace int ftrace_shutdown_arch_init(void) +{ + struct ftrace_page *pg; + int cnt; + int i; + + /* allocate a few pages */ + ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); + if (!ftrace_pages_start) + return -1; + + /* + * Allocate a few more pages. + * + * TODO: have some parser search vmlinux before + * final linking to find all calls to ftrace. + * Then we can: + * a) know how many pages to allocate. + * and/or + * b) set up the table then. + * + * The dynamic code is still necessary for + * modules. + */ + + pg = ftrace_pages = ftrace_pages_start; + + cnt = NR_TO_INIT / ENTRIES_PER_PAGE; + + for (i = 0; i < cnt; i++) { + pg->next = (void *)get_zeroed_page(GFP_KERNEL); + + /* If we fail, we'll try later anyway */ + if (!pg->next) + break; + + pg = pg->next; + } + + return 0; +} -- cgit v1.2.1 From dfa60aba04dae7833d75b2e2be124bb7cfb8239f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: use nops instead of jmp This patch patches the call to mcount with nops instead of a jmp over the mcount call. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/alternative.c | 4 ++-- arch/x86/kernel/ftrace.c | 40 ++++++++++++++++++++++++---------------- 2 files changed, 26 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 65c7857a90dd..de240ba2e288 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -143,7 +143,7 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = { #ifdef CONFIG_X86_64 extern char __vsyscall_0; -static inline const unsigned char*const * find_nop_table(void) +const unsigned char *const *find_nop_table(void) { return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL || boot_cpu_data.x86 < 6 ? k8_nops : p6_nops; @@ -162,7 +162,7 @@ static const struct nop { { -1, NULL } }; -static const unsigned char*const * find_nop_table(void) +const unsigned char *const *find_nop_table(void) { const unsigned char *const *noptable = intel_nops; int i; diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 5dd58136ef02..2e060c58b860 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -16,11 +16,12 @@ #include #include -#define CALL_BACK 5 +#include -#define JMPFWD 0x03eb +#define CALL_BACK 5 -static unsigned short ftrace_jmp = JMPFWD; +/* Long is fine, even if it is only 4 bytes ;-) */ +static long *ftrace_nop; struct ftrace_record { struct dyn_ftrace rec; @@ -55,13 +56,13 @@ static struct ftrace_page *ftrace_pages; notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) { struct ftrace_record *rec; - unsigned short save; + unsigned long save; ip -= CALL_BACK; - save = *(short *)ip; + save = *(long *)ip; /* If this was already converted, skip it */ - if (save == JMPFWD) + if (save == *ftrace_nop) return NULL; if (ftrace_pages->index == ENTRIES_PER_PAGE) { @@ -79,9 +80,10 @@ static int notrace ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char *new_code) { - unsigned short old = *(unsigned short *)old_code; - unsigned short new = *(unsigned short *)new_code; - unsigned short replaced; + unsigned replaced; + unsigned old = *(unsigned *)old_code; /* 4 bytes */ + unsigned new = *(unsigned *)new_code; /* 4 bytes */ + unsigned char newch = new_code[4]; int faulted = 0; /* @@ -94,7 +96,9 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, */ asm volatile ( "1: lock\n" - " cmpxchg %w3, (%2)\n" + " cmpxchg %3, (%2)\n" + " jnz 2f\n" + " movb %b4, 4(%2)\n" "2:\n" ".section .fixup, \"ax\"\n" " movl $1, %0\n" @@ -102,11 +106,12 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, ".previous\n" _ASM_EXTABLE(1b, 3b) : "=r"(faulted), "=a"(replaced) - : "r"(ip), "r"(new), "0"(faulted), "a"(old) + : "r"(ip), "r"(new), "r"(newch), + "0"(faulted), "a"(old) : "memory"); sync_core(); - if (replaced != old) + if (replaced != old && replaced != new) faulted = 2; return faulted; @@ -132,7 +137,7 @@ notrace void ftrace_code_disable(struct dyn_ftrace *rec) /* move the IP back to the start of the call */ ip -= CALL_BACK; - r->failed = ftrace_modify_code(ip, save.code, (char *)&ftrace_jmp); + r->failed = ftrace_modify_code(ip, save.code, (char *)ftrace_nop); } static void notrace ftrace_replace_code(int saved) @@ -144,9 +149,9 @@ static void notrace ftrace_replace_code(int saved) int i; if (saved) - old = (char *)&ftrace_jmp; + old = (char *)ftrace_nop; else - new = (char *)&ftrace_jmp; + new = (char *)ftrace_nop; for (pg = ftrace_pages_start; pg; pg = pg->next) { for (i = 0; i < pg->index; i++) { @@ -194,12 +199,15 @@ notrace void ftrace_shutdown_replenish(void) ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); } -notrace int ftrace_shutdown_arch_init(void) +notrace int __init ftrace_shutdown_arch_init(void) { + const unsigned char *const *noptable = find_nop_table(); struct ftrace_page *pg; int cnt; int i; + ftrace_nop = (unsigned long *)noptable[CALL_BACK]; + /* allocate a few pages */ ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); if (!ftrace_pages_start) -- cgit v1.2.1 From 3c1720f00bb619302ba19d55986ab565e74d06db Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: move memory management out of arch code This patch moves the memory management of the ftrace records out of the arch code and into the generic code making the arch code simpler. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ftrace.c | 183 ++++++++--------------------------------------- 1 file changed, 29 insertions(+), 154 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 2e060c58b860..b69795efa226 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -23,25 +23,6 @@ /* Long is fine, even if it is only 4 bytes ;-) */ static long *ftrace_nop; -struct ftrace_record { - struct dyn_ftrace rec; - int failed; -} __attribute__((packed)); - -struct ftrace_page { - struct ftrace_page *next; - int index; - struct ftrace_record records[]; -} __attribute__((packed)); - -#define ENTRIES_PER_PAGE \ - ((PAGE_SIZE - sizeof(struct ftrace_page)) / sizeof(struct ftrace_record)) - -/* estimate from running different kernels */ -#define NR_TO_INIT 10000 - -#define MCOUNT_ADDR ((long)(&mcount)) - union ftrace_code_union { char code[5]; struct { @@ -50,33 +31,41 @@ union ftrace_code_union { } __attribute__((packed)); }; -static struct ftrace_page *ftrace_pages_start; -static struct ftrace_page *ftrace_pages; - -notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) +notrace int ftrace_ip_converted(unsigned long ip) { - struct ftrace_record *rec; unsigned long save; ip -= CALL_BACK; save = *(long *)ip; - /* If this was already converted, skip it */ - if (save == *ftrace_nop) - return NULL; + return save == *ftrace_nop; +} - if (ftrace_pages->index == ENTRIES_PER_PAGE) { - if (!ftrace_pages->next) - return NULL; - ftrace_pages = ftrace_pages->next; - } +static int notrace ftrace_calc_offset(long ip, long addr) +{ + return (int)(addr - ip); +} - rec = &ftrace_pages->records[ftrace_pages->index++]; +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static union ftrace_code_union calc; - return &rec->rec; + calc.e8 = 0xe8; + calc.offset = ftrace_calc_offset(ip, addr); + + /* + * No locking needed, this must be called via kstop_machine + * which in essence is like running on a uniprocessor machine. + */ + return calc.code; } -static int notrace +notrace int ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char *new_code) { @@ -86,6 +75,9 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char newch = new_code[4]; int faulted = 0; + /* move the IP back to the start of the call */ + ip -= CALL_BACK; + /* * Note: Due to modules and __init, code can * disappear and change, we need to protect against faulting @@ -117,129 +109,12 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, return faulted; } -static int notrace ftrace_calc_offset(long ip) -{ - return (int)(MCOUNT_ADDR - ip); -} - -notrace void ftrace_code_disable(struct dyn_ftrace *rec) -{ - unsigned long ip; - union ftrace_code_union save; - struct ftrace_record *r = - container_of(rec, struct ftrace_record, rec); - - ip = rec->ip; - - save.e8 = 0xe8; - save.offset = ftrace_calc_offset(ip); - - /* move the IP back to the start of the call */ - ip -= CALL_BACK; - - r->failed = ftrace_modify_code(ip, save.code, (char *)ftrace_nop); -} - -static void notrace ftrace_replace_code(int saved) -{ - unsigned char *new = NULL, *old = NULL; - struct ftrace_record *rec; - struct ftrace_page *pg; - unsigned long ip; - int i; - - if (saved) - old = (char *)ftrace_nop; - else - new = (char *)ftrace_nop; - - for (pg = ftrace_pages_start; pg; pg = pg->next) { - for (i = 0; i < pg->index; i++) { - union ftrace_code_union calc; - rec = &pg->records[i]; - - /* don't modify code that has already faulted */ - if (rec->failed) - continue; - - ip = rec->rec.ip; - - calc.e8 = 0xe8; - calc.offset = ftrace_calc_offset(ip); - - if (saved) - new = calc.code; - else - old = calc.code; - - ip -= CALL_BACK; - - rec->failed = ftrace_modify_code(ip, old, new); - } - } - -} - -notrace void ftrace_startup_code(void) -{ - ftrace_replace_code(1); -} - -notrace void ftrace_shutdown_code(void) -{ - ftrace_replace_code(0); -} - -notrace void ftrace_shutdown_replenish(void) -{ - if (ftrace_pages->next) - return; - - /* allocate another page */ - ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); -} - -notrace int __init ftrace_shutdown_arch_init(void) +int __init ftrace_dyn_arch_init(void) { const unsigned char *const *noptable = find_nop_table(); - struct ftrace_page *pg; - int cnt; - int i; ftrace_nop = (unsigned long *)noptable[CALL_BACK]; - /* allocate a few pages */ - ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); - if (!ftrace_pages_start) - return -1; - - /* - * Allocate a few more pages. - * - * TODO: have some parser search vmlinux before - * final linking to find all calls to ftrace. - * Then we can: - * a) know how many pages to allocate. - * and/or - * b) set up the table then. - * - * The dynamic code is still necessary for - * modules. - */ - - pg = ftrace_pages = ftrace_pages_start; - - cnt = NR_TO_INIT / ENTRIES_PER_PAGE; - - for (i = 0; i < cnt; i++) { - pg->next = (void *)get_zeroed_page(GFP_KERNEL); - - /* If we fail, we'll try later anyway */ - if (!pg->next) - break; - - pg = pg->next; - } - return 0; } + -- cgit v1.2.1 From d61f82d06672f57fca410da6f7fffd15867db622 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/entry_32.S | 47 +++++++++++++++++++++++++++++--- arch/x86/kernel/entry_64.S | 67 +++++++++++++++++++++++++++++++++++++++++++++- arch/x86/kernel/ftrace.c | 41 +++++++++++++++++++++++++++- 3 files changed, 150 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index f47b9b5440d2..e6517ce0b824 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1110,10 +1110,50 @@ ENDPROC(xen_failsafe_callback) #endif /* CONFIG_XEN */ #ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE + +ENTRY(mcount) + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + +.globl mcount_call +mcount_call: + call ftrace_stub + + popl %edx + popl %ecx + popl %eax + + ret +END(mcount) + +ENTRY(ftrace_caller) + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + +.globl ftrace_call +ftrace_call: + call ftrace_stub + + popl %edx + popl %ecx + popl %eax + +.globl ftrace_stub +ftrace_stub: + ret +END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + ENTRY(mcount) cmpl $ftrace_stub, ftrace_trace_function jnz trace - .globl ftrace_stub ftrace_stub: ret @@ -1126,7 +1166,7 @@ trace: movl 0xc(%esp), %eax movl 0x4(%ebp), %edx - call *ftrace_trace_function + call *ftrace_trace_function popl %edx popl %ecx @@ -1134,7 +1174,8 @@ trace: jmp ftrace_stub END(mcount) -#endif +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FTRACE */ .section .rodata,"a" #include "syscall_table_32.S" diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index f046e0c64883..fe25e5febca3 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -55,6 +55,70 @@ .code64 #ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(mcount) + + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + +.globl mcount_call +mcount_call: + call ftrace_stub + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + + retq +END(mcount) + +ENTRY(ftrace_caller) + + /* taken from glibc */ + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + movq 8(%rbp), %rsi + +.globl ftrace_call +ftrace_call: + call ftrace_stub + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + +.globl ftrace_stub +ftrace_stub: + retq +END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ ENTRY(mcount) cmpq $ftrace_stub, ftrace_trace_function jnz trace @@ -89,7 +153,8 @@ trace: jmp ftrace_stub END(mcount) -#endif +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FTRACE */ #ifndef CONFIG_PREEMPT #define retint_kernel retint_restore_args diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index b69795efa226..9f44623e0072 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -109,10 +109,49 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, return faulted; } -int __init ftrace_dyn_arch_init(void) +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[5], *new; + int ret; + + ip += CALL_BACK; + + memcpy(old, &ftrace_call, 5); + new = ftrace_call_replace(ip, (unsigned long)func); + ret = ftrace_modify_code(ip, old, new); + + return ret; +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[5], *new; + + /* ip is at the location, but modify code will subtact this */ + ip += CALL_BACK; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, 5); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + +int __init ftrace_dyn_arch_init(void *data) { const unsigned char *const *noptable = find_nop_table(); + /* This is running in kstop_machine */ + + ftrace_mcount_set(data); + ftrace_nop = (unsigned long *)noptable[CALL_BACK]; return 0; -- cgit v1.2.1 From f43fdad8627fec2d21df92799b254dceb66c9c3c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: fix kexec disable the tracer while kexec pulls the rug from under the old kernel. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/machine_kexec_32.c | 4 ++++ arch/x86/kernel/machine_kexec_64.c | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index d0b234c9fc31..88923fd7a6fc 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -11,6 +11,8 @@ #include #include #include +#include + #include #include #include @@ -107,6 +109,8 @@ NORET_TYPE void machine_kexec(struct kimage *image) unsigned long page_list[PAGES_NR]; void *control_page; + tracer_disable(); + /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 576a03db4511..1558fdc174f9 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -11,6 +11,8 @@ #include #include #include +#include + #include #include #include @@ -184,6 +186,8 @@ NORET_TYPE void machine_kexec(struct kimage *image) unsigned long page_list[PAGES_NR]; void *control_page; + tracer_disable(); + /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); -- cgit v1.2.1 From a56be3fe2f65f9f776e727bfd382e35db75911d6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:56 +0200 Subject: ftrace: fix the fault label in updating code The fault label to jump to on fault of updating the code was misplaced preventing the fault from being recorded. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ftrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 9f44623e0072..498608c015fb 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -93,8 +93,8 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, " movb %b4, 4(%2)\n" "2:\n" ".section .fixup, \"ax\"\n" - " movl $1, %0\n" - "3: jmp 2b\n" + "3: movl $1, %0\n" + " jmp 2b\n" ".previous\n" _ASM_EXTABLE(1b, 3b) : "=r"(faulted), "=a"(replaced) -- cgit v1.2.1 From 8f0f996e80b980fba07d11961d96a5fefb60976a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:56 +0200 Subject: ftrace: dont write protect kernel text Dynamic ftrace cant work when the kernel has its text write protected. This patch keeps the kernel from being write protected when dynamic ftrace is in place. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/init_32.c | 4 ++++ arch/x86/mm/init_64.c | 10 ++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index ec30d10154b6..f96eca21ad8f 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -710,6 +710,8 @@ void mark_rodata_ro(void) unsigned long start = PFN_ALIGN(_text); unsigned long size = PFN_ALIGN(_etext) - start; +#ifndef CONFIG_DYNAMIC_FTRACE + /* Dynamic tracing modifies the kernel text section */ set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT); printk(KERN_INFO "Write protecting the kernel text: %luk\n", size >> 10); @@ -722,6 +724,8 @@ void mark_rodata_ro(void) printk(KERN_INFO "Testing CPA: write protecting again\n"); set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT); #endif +#endif /* CONFIG_DYNAMIC_FTRACE */ + start += size; size = (unsigned long)__end_rodata - start; set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT); diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..41824e776b6c 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -766,6 +766,13 @@ EXPORT_SYMBOL_GPL(rodata_test_data); void mark_rodata_ro(void) { unsigned long start = PFN_ALIGN(_stext), end = PFN_ALIGN(__end_rodata); + unsigned long rodata_start = + ((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK; + +#ifdef CONFIG_DYNAMIC_FTRACE + /* Dynamic tracing modifies the kernel text section */ + start = rodata_start; +#endif printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n", (end - start) >> 10); @@ -775,8 +782,7 @@ void mark_rodata_ro(void) * The rodata section (but not the kernel text!) should also be * not-executable. */ - start = ((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK; - set_memory_nx(start, (end - start) >> PAGE_SHIFT); + set_memory_nx(rodata_start, (end - start) >> PAGE_SHIFT); rodata_test(); -- cgit v1.2.1 From 86069782d62e731b4835a0cf8eb7d1d0e17cf306 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86: add a list for custom page fault handlers. Provides kernel modules a way to register custom page fault handlers. On every page fault this will call a list of registered functions. The functions may handle the fault and force do_page_fault() to return immediately. This functionality is similar to the now removed page fault notifiers. Custom page fault handlers are used by debugging and reverse engineering tools. Mmiotrace is one such tool and a patch to add it into the tree will follow. The custom page fault handlers are called earlier in do_page_fault() than the page fault notifiers were. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 8 ++++++++ arch/x86/mm/fault.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31ba4795..9431a8399844 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -168,6 +168,14 @@ config IOMMU_LEAK Add a simple leak tracer to the IOMMU code. This is useful when you are debugging a buggy device driver that leaks IOMMU mappings. +config PAGE_FAULT_HANDLERS + bool "Custom page fault handlers" + depends on DEBUG_KERNEL + help + Allow the use of custom page fault handlers. A kernel module may + register a function that is called on every page fault. Custom + handlers are used by some debugging and reverse engineering tools. + # # IO delay types: # diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index fd7e1798c75a..343f5c1aacc8 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -49,6 +49,60 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) +#ifdef CONFIG_PAGE_FAULT_HANDLERS +static HLIST_HEAD(pf_handlers); /* protected by RCU */ +static DEFINE_SPINLOCK(pf_handlers_writer); + +void register_page_fault_handler(struct pf_handler *new_pfh) +{ + unsigned long flags; + spin_lock_irqsave(&pf_handlers_writer, flags); + hlist_add_head_rcu(&new_pfh->hlist, &pf_handlers); + spin_unlock_irqrestore(&pf_handlers_writer, flags); +} +EXPORT_SYMBOL_GPL(register_page_fault_handler); + +/** + * unregister_page_fault_handler: + * The caller must ensure @old_pfh is not in use anymore before freeing it. + * This function does not guarantee it. The list of handlers is protected by + * RCU, so you can do this by e.g. calling synchronize_rcu(). + */ +void unregister_page_fault_handler(struct pf_handler *old_pfh) +{ + unsigned long flags; + spin_lock_irqsave(&pf_handlers_writer, flags); + hlist_del_rcu(&old_pfh->hlist); + spin_unlock_irqrestore(&pf_handlers_writer, flags); +} +EXPORT_SYMBOL_GPL(unregister_page_fault_handler); +#endif + +/* returns non-zero if do_page_fault() should return */ +static int handle_custom_pf(struct pt_regs *regs, unsigned long error_code, + unsigned long address) +{ +#ifdef CONFIG_PAGE_FAULT_HANDLERS + int ret = 0; + struct pf_handler *cur; + struct hlist_node *ncur; + + if (hlist_empty(&pf_handlers)) + return 0; + + rcu_read_lock(); + hlist_for_each_entry_rcu(cur, ncur, &pf_handlers, hlist) { + ret = cur->handler(regs, error_code, address); + if (ret) + break; + } + rcu_read_unlock(); + return ret; +#else + return 0; +#endif +} + static inline int notify_page_fault(struct pt_regs *regs) { #ifdef CONFIG_KPROBES @@ -601,6 +655,8 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) if (notify_page_fault(regs)) return; + if (handle_custom_pf(regs, error_code, address)) + return; /* * We fault-in kernel-space virtual memory on-demand. The -- cgit v1.2.1 From 72b59d67f80983f7bb587b086fb4cb1bc95263a4 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:01 +0200 Subject: x86_64: fix kernel rodata NX setting Without CONFIG_DYNAMIC_FTRACE, mark_rodata_ro() would mark a wrong number of pages as no-execute. The bug was introduced in the patch "ftrace: dont write protect kernel text". The symptom was machine reboot after a CPU hotplug. Signed-off-by: Pekka Paalanen Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/init_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 41824e776b6c..295be1d07b82 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -782,7 +782,7 @@ void mark_rodata_ro(void) * The rodata section (but not the kernel text!) should also be * not-executable. */ - set_memory_nx(rodata_start, (end - start) >> PAGE_SHIFT); + set_memory_nx(rodata_start, (end - rodata_start) >> PAGE_SHIFT); rodata_test(); -- cgit v1.2.1 From 2f1dafe50cc4e58a239fd81bd47f87f32042a1ee Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:01 +0200 Subject: x86: fix SMP alternatives: use mutex instead of spinlock, text_poke is sleepable text_poke is sleepable. The original fix by Mathieu Desnoyers . Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/alternative.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index de240ba2e288..2763cb37b553 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -1,6 +1,6 @@ #include #include -#include +#include #include #include #include @@ -279,7 +279,7 @@ struct smp_alt_module { struct list_head next; }; static LIST_HEAD(smp_alt_modules); -static DEFINE_SPINLOCK(smp_alt); +static DEFINE_MUTEX(smp_alt); static int smp_mode = 1; /* protected by smp_alt */ void alternatives_smp_module_add(struct module *mod, char *name, @@ -312,12 +312,12 @@ void alternatives_smp_module_add(struct module *mod, char *name, __func__, smp->locks, smp->locks_end, smp->text, smp->text_end, smp->name); - spin_lock(&smp_alt); + mutex_lock(&smp_alt); list_add_tail(&smp->next, &smp_alt_modules); if (boot_cpu_has(X86_FEATURE_UP)) alternatives_smp_unlock(smp->locks, smp->locks_end, smp->text, smp->text_end); - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } void alternatives_smp_module_del(struct module *mod) @@ -327,17 +327,17 @@ void alternatives_smp_module_del(struct module *mod) if (smp_alt_once || noreplace_smp) return; - spin_lock(&smp_alt); + mutex_lock(&smp_alt); list_for_each_entry(item, &smp_alt_modules, next) { if (mod != item->mod) continue; list_del(&item->next); - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); DPRINTK("%s: %s\n", __func__, item->name); kfree(item); return; } - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } void alternatives_smp_switch(int smp) @@ -359,7 +359,7 @@ void alternatives_smp_switch(int smp) return; BUG_ON(!smp && (num_online_cpus() > 1)); - spin_lock(&smp_alt); + mutex_lock(&smp_alt); /* * Avoid unnecessary switches because it forces JIT based VMs to @@ -383,7 +383,7 @@ void alternatives_smp_switch(int smp) mod->text, mod->text_end); } smp_mode = smp; - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } #endif -- cgit v1.2.1 From d05f5f9906740474eb768823004ffcd775b12ca6 Mon Sep 17 00:00:00 2001 From: David Miller Date: Tue, 13 May 2008 22:06:59 -0700 Subject: sparc64: add ftrace support. Signed-off-by: David S. Miller Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/sparc64/Kconfig | 1 + arch/sparc64/Kconfig.debug | 2 +- arch/sparc64/kernel/Makefile | 1 + arch/sparc64/kernel/ftrace.c | 99 ++++++++++++++++++++++++++++++++++++++++++++ arch/sparc64/lib/mcount.S | 58 ++++++++++++++++++++++++-- 5 files changed, 156 insertions(+), 5 deletions(-) create mode 100644 arch/sparc64/kernel/ftrace.c (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index eb36f3b746b8..a480df6e6012 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -11,6 +11,7 @@ config SPARC config SPARC64 bool default y + select HAVE_FTRACE select HAVE_IDE select HAVE_LMB select HAVE_ARCH_KGDB diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index 6a4d28a4076d..d6d32d178fc8 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -33,7 +33,7 @@ config DEBUG_PAGEALLOC config MCOUNT bool - depends on STACK_DEBUG + depends on STACK_DEBUG || FTRACE default y config FRAME_POINTER diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index ec4f5ebb1ca6..418b5782096e 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -14,6 +14,7 @@ obj-y := process.o setup.o cpu.o idprom.o \ power.o sbus.o sparc64_ksyms.o chmc.o \ visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_PCI) += ebus.o pci_common.o \ pci_psycho.o pci_sabre.o pci_schizo.o \ diff --git a/arch/sparc64/kernel/ftrace.c b/arch/sparc64/kernel/ftrace.c new file mode 100644 index 000000000000..f449e6df6c4a --- /dev/null +++ b/arch/sparc64/kernel/ftrace.c @@ -0,0 +1,99 @@ +#include +#include +#include +#include +#include +#include + +static const u32 ftrace_nop = 0x01000000; + +notrace int ftrace_ip_converted(unsigned long ip) +{ + u32 insn = *(u32 *) ip; + + return (insn == ftrace_nop); +} + +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)&ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static u32 call; + s32 off; + + off = ((s32)addr - (s32)ip); + call = 0x40000000 | ((u32)off >> 2); + + return (unsigned char *) &call; +} + +notrace int +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + u32 old = *(u32 *)old_code; + u32 new = *(u32 *)new_code; + u32 replaced; + int faulted; + + __asm__ __volatile__( + "1: cas [%[ip]], %[old], %[new]\n" + " flush %[ip]\n" + " mov 0, %[faulted]\n" + "2:\n" + " .section .fixup,#alloc,#execinstr\n" + " .align 4\n" + "3: sethi %%hi(2b), %[faulted]\n" + " jmpl %[faulted] + %%lo(2b), %%g0\n" + " mov 1, %[faulted]\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .align 4\n" + " .word 1b, 3b\n" + " .previous\n" + : "=r" (replaced), [faulted] "=r" (faulted) + : [new] "0" (new), [old] "r" (old), [ip] "r" (ip) + : "memory"); + + if (replaced != old && replaced != new) + faulted = 2; + + return faulted; +} + +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[4], *new; + + memcpy(old, &ftrace_call, 4); + new = ftrace_call_replace(ip, (unsigned long)func); + return ftrace_modify_code(ip, old, new); +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[4], *new; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, 4); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + + +int __init ftrace_dyn_arch_init(void *data) +{ + ftrace_mcount_set(data); + return 0; +} diff --git a/arch/sparc64/lib/mcount.S b/arch/sparc64/lib/mcount.S index 9e4534b485c7..7735a7a60533 100644 --- a/arch/sparc64/lib/mcount.S +++ b/arch/sparc64/lib/mcount.S @@ -28,10 +28,13 @@ ovstack: .skip OVSTACKSIZE #endif .text - .align 32 - .globl mcount, _mcount -mcount: + .align 32 + .globl _mcount + .type _mcount,#function + .globl mcount + .type mcount,#function _mcount: +mcount: #ifdef CONFIG_STACK_DEBUG /* * Check whether %sp is dangerously low. @@ -55,6 +58,53 @@ _mcount: or %g3, %lo(panicstring), %o0 call prom_halt nop +1: +#endif +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE + mov %o7, %o0 + .globl mcount_call +mcount_call: + call ftrace_stub + mov %o0, %o7 +#else + sethi %hi(ftrace_trace_function), %g1 + sethi %hi(ftrace_stub), %g2 + ldx [%g1 + %lo(ftrace_trace_function)], %g1 + or %g2, %lo(ftrace_stub), %g2 + cmp %g1, %g2 + be,pn %icc, 1f + mov %i7, %o1 + jmpl %g1, %g0 + mov %o7, %o0 + /* not reached */ +1: #endif -1: retl +#endif + retl nop + .size _mcount,.-_mcount + .size mcount,.-mcount + +#ifdef CONFIG_FTRACE + .globl ftrace_stub + .type ftrace_stub,#function +ftrace_stub: + retl + nop + .size ftrace_stub,.-ftrace_stub +#ifdef CONFIG_DYNAMIC_FTRACE + .globl ftrace_caller + .type ftrace_caller,#function +ftrace_caller: + mov %i7, %o1 + mov %o7, %o0 + .globl ftrace_call +ftrace_call: + call ftrace_stub + mov %o0, %o7 + retl + nop + .size ftrace_caller,.-ftrace_caller +#endif +#endif -- cgit v1.2.1 From 37135677e653537ffc6e7def679443272a1c03c3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 14 May 2008 08:10:31 +0200 Subject: ftrace: fix mcount export bug David S. Miller noticed the following bug: the -pg instrumentation function callback is named differently on each platform. On x86 it is mcount, on sparc it is _mcount. So the export does not make sense in kernel/trace/ftrace.c - move it to x86. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i386_ksyms_32.c | 9 ++++++++- arch/x86/kernel/x8664_ksyms_64.c | 11 +++++++++-- 2 files changed, 17 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c index deb43785e923..29999dbb754c 100644 --- a/arch/x86/kernel/i386_ksyms_32.c +++ b/arch/x86/kernel/i386_ksyms_32.c @@ -1,7 +1,14 @@ +#include #include + #include -#include #include +#include + +#ifdef CONFIG_FTRACE +/* mcount is defined in assembly */ +EXPORT_SYMBOL(mcount); +#endif /* Networking helper routines. */ EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c index f6c05d0410fb..122885bc5f3b 100644 --- a/arch/x86/kernel/x8664_ksyms_64.c +++ b/arch/x86/kernel/x8664_ksyms_64.c @@ -1,15 +1,22 @@ /* Exports for assembly files. All C exports should go in the respective C files. */ +#include #include -#include #include +#include + #include -#include #include +#include #include +#ifdef CONFIG_FTRACE +/* mcount is defined in assembly */ +EXPORT_SYMBOL(mcount); +#endif + EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(__get_user_1); -- cgit v1.2.1 From 4e491d14f2506b218d678935c25a7027b79178b1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 23:49:44 -0400 Subject: ftrace: support for PowerPC This patch adds full support for ftrace for PowerPC (both 64 and 32 bit). This includes dynamic tracing and function filtering. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/powerpc/Kconfig | 3 +- arch/powerpc/kernel/Makefile | 14 +++ arch/powerpc/kernel/entry_32.S | 130 ++++++++++++++++++++++++ arch/powerpc/kernel/entry_64.S | 62 ++++++++++++ arch/powerpc/kernel/ftrace.c | 165 +++++++++++++++++++++++++++++++ arch/powerpc/kernel/io.c | 3 +- arch/powerpc/kernel/irq.c | 6 +- arch/powerpc/kernel/setup_32.c | 11 ++- arch/powerpc/kernel/setup_64.c | 5 + arch/powerpc/platforms/powermac/Makefile | 5 + 10 files changed, 396 insertions(+), 8 deletions(-) create mode 100644 arch/powerpc/kernel/ftrace.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3934e2659407..62d034adbd43 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -105,11 +105,12 @@ config ARCH_NO_VIRT_TO_BUS config PPC bool default y + select HAVE_FTRACE select HAVE_IDE - select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_LMB + select HAVE_OPROFILE config EARLY_PRINTK bool diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 2346d271fbfd..f3f5e2641432 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,6 +12,18 @@ CFLAGS_prom_init.o += -fPIC CFLAGS_btext.o += -fPIC endif +ifdef CONFIG_FTRACE +# Do not trace early boot code +CFLAGS_REMOVE_cputable.o = -pg +CFLAGS_REMOVE_prom_init.o = -pg + +ifdef CONFIG_DYNAMIC_FTRACE +# dynamic ftrace setup. +CFLAGS_REMOVE_ftrace.o = -pg +endif + +endif + obj-y := cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ init_task.o process.o systbl.o idle.o \ @@ -78,6 +90,8 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ obj-$(CONFIG_AUDIT) += audit.o obj64-$(CONFIG_AUDIT) += compat_audit.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o + obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o ifneq ($(CONFIG_PPC_INDIRECT_IO),y) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 0c8614d9875c..0e6221889ca9 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -1035,3 +1035,133 @@ machine_check_in_rtas: /* XXX load up BATs and panic */ #endif /* CONFIG_PPC_RTAS */ + +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +_GLOBAL(mcount) +_GLOBAL(_mcount) + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + stw r7, 28(r1) + mfcr r5 + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) + .globl mcount_call +mcount_call: + bl ftrace_stub + nop + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr + +_GLOBAL(ftrace_caller) + /* Based off of objdump optput from glibc */ + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr +#else +_GLOBAL(mcount) +_GLOBAL(_mcount) + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) + + LOAD_REG_ADDR(r5, ftrace_trace_function) +#if 0 + mtctr r3 + mr r1, r5 + bctrl +#endif + lwz r5,0(r5) +#if 1 + mtctr r5 + bctrl +#else + bl ftrace_stub +#endif + nop + + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr +#endif + +_GLOBAL(ftrace_stub) + blr + +#endif /* CONFIG_MCOUNT */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index c0db5b769e55..2c4d9e056ead 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -870,3 +870,65 @@ _GLOBAL(enter_prom) ld r0,16(r1) mtlr r0 blr + +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +_GLOBAL(mcount) +_GLOBAL(_mcount) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + stdu r1, -112(r1) + std r3, 128(r1) + .globl mcount_call +mcount_call: + bl ftrace_stub + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 + blr + +_GLOBAL(ftrace_caller) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr +#else +_GLOBAL(mcount) + blr + +_GLOBAL(_mcount) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) + + + LOAD_REG_ADDR(r5,ftrace_trace_function) + ld r5,0(r5) + ld r5,0(r5) + mtctr r5 + bctrl + + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr + +#endif +#endif diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c new file mode 100644 index 000000000000..5a4993fefa45 --- /dev/null +++ b/arch/powerpc/kernel/ftrace.c @@ -0,0 +1,165 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt + * + * Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#define CALL_BACK 4 + +static unsigned int ftrace_nop = 0x60000000; + +#ifdef CONFIG_PPC32 +# define GET_ADDR(addr) addr +#else +/* PowerPC64's functions are data that points to the functions */ +# define GET_ADDR(addr) *(unsigned long *)addr +#endif + +notrace int ftrace_ip_converted(unsigned long ip) +{ + unsigned int save; + + ip -= CALL_BACK; + save = *(unsigned int *)ip; + + return save == ftrace_nop; +} + +static unsigned int notrace ftrace_calc_offset(long ip, long addr) +{ + return (int)((addr + CALL_BACK) - ip); +} + +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)&ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static unsigned int op; + + addr = GET_ADDR(addr); + + /* Set to "bl addr" */ + op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffe); + + /* + * No locking needed, this must be called via kstop_machine + * which in essence is like running on a uniprocessor machine. + */ + return (unsigned char *)&op; +} + +#ifdef CONFIG_PPC64 +# define _ASM_ALIGN " .align 3 " +# define _ASM_PTR " .llong " +#else +# define _ASM_ALIGN " .align 2 " +# define _ASM_PTR " .long " +#endif + +notrace int +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned replaced; + unsigned old = *(unsigned *)old_code; + unsigned new = *(unsigned *)new_code; + int faulted = 0; + + /* move the IP back to the start of the call */ + ip -= CALL_BACK; + + /* + * Note: Due to modules and __init, code can + * disappear and change, we need to protect against faulting + * as well as code changing. + * + * No real locking needed, this code is run through + * kstop_machine. + */ + asm volatile ( + "1: lwz %1, 0(%2)\n" + " cmpw %1, %5\n" + " bne 2f\n" + " stwu %3, 0(%2)\n" + "2:\n" + ".section .fixup, \"ax\"\n" + "3: li %0, 1\n" + " b 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + _ASM_ALIGN "\n" + _ASM_PTR "1b, 3b\n" + ".previous" + : "=r"(faulted), "=r"(replaced) + : "r"(ip), "r"(new), + "0"(faulted), "r"(old) + : "memory"); + + if (replaced != old && replaced != new) + faulted = 2; + + if (!faulted) + flush_icache_range(ip, ip + 8); + + return faulted; +} + +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[4], *new; + int ret; + + ip += CALL_BACK; + + memcpy(old, &ftrace_call, 4); + new = ftrace_call_replace(ip, (unsigned long)func); + ret = ftrace_modify_code(ip, old, new); + + return ret; +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[4], *new; + + /* ip is at the location, but modify code will subtact this */ + ip += CALL_BACK; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, 4); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* This is running in kstop_machine */ + + ftrace_mcount_set(data); + + return 0; +} + diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c index e31aca9208eb..1882bf419fa6 100644 --- a/arch/powerpc/kernel/io.c +++ b/arch/powerpc/kernel/io.c @@ -120,7 +120,8 @@ EXPORT_SYMBOL(_outsl_ns); #define IO_CHECK_ALIGN(v,a) ((((unsigned long)(v)) & ((a) - 1)) == 0) -void _memset_io(volatile void __iomem *addr, int c, unsigned long n) +notrace void +_memset_io(volatile void __iomem *addr, int c, unsigned long n) { void *p = (void __force *)addr; u32 lc = c; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2f73f705d564..6e01eb0a3315 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -98,7 +98,7 @@ EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -static inline unsigned long get_hard_enabled(void) +static inline notrace unsigned long get_hard_enabled(void) { unsigned long enabled; @@ -108,13 +108,13 @@ static inline unsigned long get_hard_enabled(void) return enabled; } -static inline void set_soft_enabled(unsigned long enable) +static inline notrace void set_soft_enabled(unsigned long enable) { __asm__ __volatile__("stb %0,%1(13)" : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } -void raw_local_irq_restore(unsigned long en) +notrace void raw_local_irq_restore(unsigned long en) { /* * get_paca()->soft_enabled = en; diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 5112a4aa801d..22f8e2bacd32 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -47,6 +47,11 @@ #include #endif +#ifdef CONFIG_FTRACE +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif + extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid; @@ -81,7 +86,7 @@ int ucache_bsize; * from the address that it was linked at, so we must use RELOC/PTRRELOC * to access static data (including strings). -- paulus */ -unsigned long __init early_init(unsigned long dt_ptr) +notrace unsigned long __init early_init(unsigned long dt_ptr) { unsigned long offset = reloc_offset(); struct cpu_spec *spec; @@ -111,7 +116,7 @@ unsigned long __init early_init(unsigned long dt_ptr) * This is called very early on the boot process, after a minimal * MMU environment has been set up but before MMU_init is called. */ -void __init machine_init(unsigned long dt_ptr, unsigned long phys) +notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys) { /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); @@ -133,7 +138,7 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys) #ifdef CONFIG_BOOKE_WDT /* Checks wdt=x and wdt_period=xx command-line option */ -int __init early_parse_wdt(char *p) +notrace int __init early_parse_wdt(char *p) { if (p && strncmp(p, "0", 1) != 0) booke_wdt_enabled = 1; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 098fd96a394a..277bf18cbbcc 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -85,6 +85,11 @@ struct ppc64_caches ppc64_caches = { }; EXPORT_SYMBOL_GPL(ppc64_caches); +#ifdef CONFIG_FTRACE +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif + /* * These are used in binfmt_elf.c to put aux entries on the stack * for each elf executable being started. diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 4d72c8f72159..89774177b209 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,5 +1,10 @@ CFLAGS_bootx_init.o += -fPIC +ifdef CONFIG_FTRACE +# Do not trace early boot code +CFLAGS_REMOVE_bootx_init.o = -pg +endif + obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o -- cgit v1.2.1 From 7fa09f24b477ad41b821713eba757b3aa7a2864a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 21:30:32 -0400 Subject: ftrace: use the new kbuild CFLAGS_REMOVE for x86/kernel directory This patch removes the Makefile turd and uses the nice CFLAGS_REMOVE macro in the x86/kernel directory. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index e142091524b0..739d49acd2f1 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -6,6 +6,13 @@ extra-y := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) +ifdef CONFIG_FTRACE +# Do not profile debug utilities +CFLAGS_REMOVE_tsc_64.o = -pg +CFLAGS_REMOVE_tsc_32.o = -pg +CFLAGS_REMOVE_rtc.o = -pg +endif + # # vsyscalls (which work on the user stack) should have # no stack-protector checks: -- cgit v1.2.1 From 677aa9f77e8de3791b481a0cec6c8b84d1eec626 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 17 May 2008 00:01:36 -0400 Subject: ftrace: add have dynamic ftrace config for archs Now that ftrace is being ported to other architectures, it has become apparent that DYNAMIC_FTRACE is dependent on whether or not that architecture implements dynamic ftrace. FTRACE itself may be ported to an architecture without porting dynamic ftrace. This patch adds HAVE_DYNAMIC_FTRACE to allow architectures to port ftrace without having to also port the dynamic aspect as well. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/powerpc/Kconfig | 1 + arch/sparc64/Kconfig | 1 + arch/x86/Kconfig | 1 + 3 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 62d034adbd43..a5e9912e2d37 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -105,6 +105,7 @@ config ARCH_NO_VIRT_TO_BUS config PPC bool default y + select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_IDE select HAVE_KPROBES diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index a480df6e6012..fca9246470b1 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -11,6 +11,7 @@ config SPARC config SPARC64 bool default y + select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_IDE select HAVE_LMB diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c742dfeb0dbe..fc86c54e791e 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -23,6 +23,7 @@ config X86 select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER -- cgit v1.2.1 From 8b7d89d02ef3c6a7c73d6596f28cea7632850af4 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86: mmiotrace - trace memory mapped IO Mmiotrace is a tool for trapping memory mapped IO (MMIO) accesses within the kernel. It is used for debugging and especially for reverse engineering evil binary drivers. Mmiotrace works by wrapping the ioremap family of kernel functions and marking the returned pages as not present. Access to the IO memory triggers a page fault, which will be handled by mmiotrace's custom page fault handler. This will single-step the faulted instruction with the MMIO page marked as present. Access logs are directed to user space via relay and debug_fs. This page fault approach is necessary, because binary drivers have readl/writel etc. calls inlined and therefore extremely difficult to trap with with e.g. kprobes. This patch depends on the custom page fault handlers patch. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 27 ++ arch/x86/kernel/Makefile | 2 + arch/x86/kernel/init_task.c | 1 + arch/x86/kernel/mmiotrace/Makefile | 4 + arch/x86/kernel/mmiotrace/kmmio.c | 391 ++++++++++++++++++++++ arch/x86/kernel/mmiotrace/kmmio.h | 58 ++++ arch/x86/kernel/mmiotrace/mmio-mod.c | 527 ++++++++++++++++++++++++++++++ arch/x86/kernel/mmiotrace/pf_in.c | 489 +++++++++++++++++++++++++++ arch/x86/kernel/mmiotrace/pf_in.h | 39 +++ arch/x86/kernel/mmiotrace/testmmiotrace.c | 77 +++++ 10 files changed, 1615 insertions(+) create mode 100644 arch/x86/kernel/mmiotrace/Makefile create mode 100644 arch/x86/kernel/mmiotrace/kmmio.c create mode 100644 arch/x86/kernel/mmiotrace/kmmio.h create mode 100644 arch/x86/kernel/mmiotrace/mmio-mod.c create mode 100644 arch/x86/kernel/mmiotrace/pf_in.c create mode 100644 arch/x86/kernel/mmiotrace/pf_in.h create mode 100644 arch/x86/kernel/mmiotrace/testmmiotrace.c (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 9431a8399844..7c6496e2225e 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -176,6 +176,33 @@ config PAGE_FAULT_HANDLERS register a function that is called on every page fault. Custom handlers are used by some debugging and reverse engineering tools. +config MMIOTRACE + tristate "Memory mapped IO tracing" + depends on DEBUG_KERNEL && PAGE_FAULT_HANDLERS && RELAY && DEBUG_FS + default n + help + This will build a kernel module called mmiotrace. + + Mmiotrace traces Memory Mapped I/O access and is meant for debugging + and reverse engineering. The kernel module offers wrapped + versions of the ioremap family of functions. The driver to be traced + must be modified to call these wrappers. A user space program is + required to collect the MMIO data. + + See http://nouveau.freedesktop.org/wiki/MmioTrace + If you are not helping to develop drivers, say N. + +config MMIOTRACE_TEST + tristate "Test module for mmiotrace" + depends on MMIOTRACE && m + default n + help + This is a dumb module for testing mmiotrace. It is very dangerous + as it will write garbage to IO memory starting at a given address. + However, it should be safe to use on e.g. unused portion of VRAM. + + Say N, unless you absolutely know what you are doing. + # # IO delay types: # diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 739d49acd2f1..a51ac153685e 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -79,6 +79,8 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_MMIOTRACE) += mmiotrace/ + obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c index a4f93b4120c1..027a5b6a12b2 100644 --- a/arch/x86/kernel/init_task.c +++ b/arch/x86/kernel/init_task.c @@ -15,6 +15,7 @@ static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */ +EXPORT_SYMBOL_GPL(init_mm); /* * Initial thread structure. diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile new file mode 100644 index 000000000000..d6905f7f981b --- /dev/null +++ b/arch/x86/kernel/mmiotrace/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_MMIOTRACE) += mmiotrace.o +mmiotrace-objs := pf_in.o kmmio.o mmio-mod.o + +obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c new file mode 100644 index 000000000000..8ba48f9c91b4 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -0,0 +1,391 @@ +/* Support for MMIO probes. + * Benfit many code from kprobes + * (C) 2002 Louis Zhuang . + * 2007 Alexander Eichner + * 2008 Pekka Paalanen + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "kmmio.h" + +#define KMMIO_HASH_BITS 6 +#define KMMIO_TABLE_SIZE (1 << KMMIO_HASH_BITS) +#define KMMIO_PAGE_HASH_BITS 4 +#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) + +struct kmmio_context { + struct kmmio_fault_page *fpage; + struct kmmio_probe *probe; + unsigned long saved_flags; + int active; +}; + +static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, + unsigned long address); +static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, + void *args); + +static DEFINE_SPINLOCK(kmmio_lock); + +/* These are protected by kmmio_lock */ +unsigned int kmmio_count; +static unsigned int handler_registered; +static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; +static LIST_HEAD(kmmio_probes); + +static struct kmmio_context kmmio_ctx[NR_CPUS]; + +static struct pf_handler kmmio_pf_hook = { + .handler = kmmio_page_fault +}; + +static struct notifier_block nb_die = { + .notifier_call = kmmio_die_notifier +}; + +int init_kmmio(void) +{ + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + + register_die_notifier(&nb_die); + return 0; +} + +void cleanup_kmmio(void) +{ + /* + * Assume the following have been already cleaned by calling + * unregister_kmmio_probe() appropriately: + * kmmio_page_table, kmmio_probes + */ + if (handler_registered) { + unregister_page_fault_handler(&kmmio_pf_hook); + synchronize_rcu(); + } + unregister_die_notifier(&nb_die); +} + +/* + * this is basically a dynamic stabbing problem: + * Could use the existing prio tree code or + * Possible better implementations: + * The Interval Skip List: A Data Structure for Finding All Intervals That + * Overlap a Point (might be simple) + * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup + */ +/* Get the kmmio at this addr (if any). You must be holding kmmio_lock. */ +static struct kmmio_probe *get_kmmio_probe(unsigned long addr) +{ + struct kmmio_probe *p; + list_for_each_entry(p, &kmmio_probes, list) { + if (addr >= p->addr && addr <= (p->addr + p->len)) + return p; + } + return NULL; +} + +static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) +{ + struct list_head *head, *tmp; + + page &= PAGE_MASK; + head = &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; + list_for_each(tmp, head) { + struct kmmio_fault_page *p + = list_entry(tmp, struct kmmio_fault_page, list); + if (p->page == page) + return p; + } + + return NULL; +} + +static void arm_kmmio_fault_page(unsigned long page, int *large) +{ + unsigned long address = page & PAGE_MASK; + pgd_t *pgd = pgd_offset_k(address); + pud_t *pud = pud_offset(pgd, address); + pmd_t *pmd = pmd_offset(pud, address); + pte_t *pte = pte_offset_kernel(pmd, address); + + if (pmd_large(*pmd)) { + set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_PRESENT)); + if (large) + *large = 1; + } else { + set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT)); + } + + __flush_tlb_one(page); +} + +static void disarm_kmmio_fault_page(unsigned long page, int *large) +{ + unsigned long address = page & PAGE_MASK; + pgd_t *pgd = pgd_offset_k(address); + pud_t *pud = pud_offset(pgd, address); + pmd_t *pmd = pmd_offset(pud, address); + pte_t *pte = pte_offset_kernel(pmd, address); + + if (large && *large) { + set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_PRESENT)); + *large = 0; + } else { + set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT)); + } + + __flush_tlb_one(page); +} + +/* + * Interrupts are disabled on entry as trap3 is an interrupt gate + * and they remain disabled thorough out this function. + */ +static int kmmio_handler(struct pt_regs *regs, unsigned long addr) +{ + struct kmmio_context *ctx; + int cpu; + + /* + * Preemption is now disabled to prevent process switch during + * single stepping. We can only handle one active kmmio trace + * per cpu, so ensure that we finish it before something else + * gets to run. + * + * XXX what if an interrupt occurs between returning from + * do_page_fault() and entering the single-step exception handler? + * And that interrupt triggers a kmmio trap? + */ + preempt_disable(); + cpu = smp_processor_id(); + ctx = &kmmio_ctx[cpu]; + + /* interrupts disabled and CPU-local data => atomicity guaranteed. */ + if (ctx->active) { + /* + * This avoids a deadlock with kmmio_lock. + * If this page fault really was due to kmmio trap, + * all hell breaks loose. + */ + printk(KERN_EMERG "mmiotrace: recursive probe hit on CPU %d, " + "for address %lu. Ignoring.\n", + cpu, addr); + goto no_kmmio; + } + ctx->active++; + + /* + * Acquire the kmmio lock to prevent changes affecting + * get_kmmio_fault_page() and get_kmmio_probe(), since we save their + * returned pointers. + * The lock is released in post_kmmio_handler(). + * XXX: could/should get_kmmio_*() be using RCU instead of spinlock? + */ + spin_lock(&kmmio_lock); + + ctx->fpage = get_kmmio_fault_page(addr); + if (!ctx->fpage) { + /* this page fault is not caused by kmmio */ + goto no_kmmio_locked; + } + + ctx->probe = get_kmmio_probe(addr); + ctx->saved_flags = (regs->flags & (TF_MASK|IF_MASK)); + + if (ctx->probe && ctx->probe->pre_handler) + ctx->probe->pre_handler(ctx->probe, regs, addr); + + regs->flags |= TF_MASK; + regs->flags &= ~IF_MASK; + + /* We hold lock, now we set present bit in PTE and single step. */ + disarm_kmmio_fault_page(ctx->fpage->page, NULL); + + return 1; + +no_kmmio_locked: + spin_unlock(&kmmio_lock); + ctx->active--; +no_kmmio: + preempt_enable_no_resched(); + /* page fault not handled by kmmio */ + return 0; +} + +/* + * Interrupts are disabled on entry as trap1 is an interrupt gate + * and they remain disabled thorough out this function. + * And we hold kmmio lock. + */ +static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + struct kmmio_context *ctx = &kmmio_ctx[cpu]; + + if (!ctx->active) + return 0; + + if (ctx->probe && ctx->probe->post_handler) + ctx->probe->post_handler(ctx->probe, condition, regs); + + arm_kmmio_fault_page(ctx->fpage->page, NULL); + + regs->flags &= ~TF_MASK; + regs->flags |= ctx->saved_flags; + + /* These were acquired in kmmio_handler(). */ + ctx->active--; + spin_unlock(&kmmio_lock); + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, flags + * will have TF set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (regs->flags & TF_MASK) + return 0; + + return 1; +} + +static int add_kmmio_fault_page(unsigned long page) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (f) { + f->count++; + return 0; + } + + f = kmalloc(sizeof(*f), GFP_ATOMIC); + if (!f) + return -1; + + f->count = 1; + f->page = page; + list_add(&f->list, + &kmmio_page_table[hash_long(f->page, KMMIO_PAGE_HASH_BITS)]); + + arm_kmmio_fault_page(f->page, NULL); + + return 0; +} + +static void release_kmmio_fault_page(unsigned long page) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (!f) + return; + + f->count--; + if (!f->count) { + disarm_kmmio_fault_page(f->page, NULL); + list_del(&f->list); + } +} + +int register_kmmio_probe(struct kmmio_probe *p) +{ + int ret = 0; + unsigned long size = 0; + + spin_lock_irq(&kmmio_lock); + kmmio_count++; + if (get_kmmio_probe(p->addr)) { + ret = -EEXIST; + goto out; + } + list_add(&p->list, &kmmio_probes); + /*printk("adding fault pages...\n");*/ + while (size < p->len) { + if (add_kmmio_fault_page(p->addr + size)) + printk(KERN_ERR "mmio: Unable to set page fault.\n"); + size += PAGE_SIZE; + } + + if (!handler_registered) { + register_page_fault_handler(&kmmio_pf_hook); + handler_registered++; + } + +out: + spin_unlock_irq(&kmmio_lock); + /* + * XXX: What should I do here? + * Here was a call to global_flush_tlb(), but it does not exist + * anymore. + */ + return ret; +} + +void unregister_kmmio_probe(struct kmmio_probe *p) +{ + unsigned long size = 0; + + spin_lock_irq(&kmmio_lock); + while (size < p->len) { + release_kmmio_fault_page(p->addr + size); + size += PAGE_SIZE; + } + list_del(&p->list); + kmmio_count--; + spin_unlock_irq(&kmmio_lock); +} + +/* + * According to 2.6.20, mainly x86_64 arch: + * This is being called from do_page_fault(), via the page fault notifier + * chain. The chain is called for both user space faults and kernel space + * faults (address >= TASK_SIZE64), except not on faults serviced by + * vmalloc_fault(). + * + * We may be in an interrupt or a critical section. Also prefecthing may + * trigger a page fault. We may be in the middle of process switch. + * The page fault hook functionality has put us inside RCU read lock. + * + * Local interrupts are disabled, so preemption cannot happen. + * Do not enable interrupts, do not sleep, and watch out for other CPUs. + */ +static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, + unsigned long address) +{ + if (is_kmmio_active()) + if (kmmio_handler(regs, address) == 1) + return -1; + return 0; +} + +static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, + void *args) +{ + struct die_args *arg = args; + + if (val == DIE_DEBUG) + if (post_kmmio_handler(arg->err, arg->regs) == 1) + return NOTIFY_STOP; + + return NOTIFY_DONE; +} diff --git a/arch/x86/kernel/mmiotrace/kmmio.h b/arch/x86/kernel/mmiotrace/kmmio.h new file mode 100644 index 000000000000..85b7f68a3b8a --- /dev/null +++ b/arch/x86/kernel/mmiotrace/kmmio.h @@ -0,0 +1,58 @@ +#ifndef _LINUX_KMMIO_H +#define _LINUX_KMMIO_H + +#include +#include +#include +#include +#include +#include +#include + +struct kmmio_probe; +struct kmmio_fault_page; +struct pt_regs; + +typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *, + struct pt_regs *, unsigned long addr); +typedef void (*kmmio_post_handler_t)(struct kmmio_probe *, + unsigned long condition, struct pt_regs *); + +struct kmmio_probe { + struct list_head list; + + /* start location of the probe point */ + unsigned long addr; + + /* length of the probe region */ + unsigned long len; + + /* Called before addr is executed. */ + kmmio_pre_handler_t pre_handler; + + /* Called after addr is executed, unless... */ + kmmio_post_handler_t post_handler; +}; + +struct kmmio_fault_page { + struct list_head list; + + /* location of the fault page */ + unsigned long page; + + int count; +}; + +/* kmmio is active by some kmmio_probes? */ +static inline int is_kmmio_active(void) +{ + extern unsigned int kmmio_count; + return kmmio_count; +} + +int init_kmmio(void); +void cleanup_kmmio(void); +int register_kmmio_probe(struct kmmio_probe *p); +void unregister_kmmio_probe(struct kmmio_probe *p); + +#endif /* _LINUX_KMMIO_H */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c new file mode 100644 index 000000000000..73561fe85f03 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -0,0 +1,527 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2005 + * Jeff Muizelaar, 2006, 2007 + * Pekka Paalanen, 2008 + * + * Derived from the read-mod example from relay-examples by Tom Zanussi. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for ISA_START_ADDRESS */ + +#include "kmmio.h" +#include "pf_in.h" + +/* This app's relay channel files will appear in /debug/mmio-trace */ +#define APP_DIR "mmio-trace" +/* the marker injection file in /proc */ +#define MARKER_FILE "mmio-marker" + +#define MODULE_NAME "mmiotrace" + +struct trap_reason { + unsigned long addr; + unsigned long ip; + enum reason_type type; + int active_traces; +}; + +static struct trap_reason pf_reason[NR_CPUS]; +static struct mm_io_header_rw cpu_trace[NR_CPUS]; + +static struct file_operations mmio_fops = { + .owner = THIS_MODULE, +}; + +static const size_t subbuf_size = 256*1024; +static struct rchan *chan; +static struct dentry *dir; +static int suspended; /* XXX should this be per cpu? */ +static struct proc_dir_entry *proc_marker_file; + +/* module parameters */ +static unsigned int n_subbufs = 32*4; +static unsigned long filter_offset; +static int nommiotrace; +static int ISA_trace; +static int trace_pc; + +module_param(n_subbufs, uint, 0); +module_param(filter_offset, ulong, 0); +module_param(nommiotrace, bool, 0); +module_param(ISA_trace, bool, 0); +module_param(trace_pc, bool, 0); + +MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); +MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); +MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); +MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); +MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); + +static void record_timestamp(struct mm_io_header *header) +{ + struct timespec now; + + getnstimeofday(&now); + header->sec = now.tv_sec; + header->nsec = now.tv_nsec; +} + +/* + * Write callback for the /proc entry: + * Read a marker and write it to the mmio trace log + */ +static int write_marker(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + char *event = NULL; + struct mm_io_header *headp; + int len = (count > 65535) ? 65535 : count; + + event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); + if (!event) + return -ENOMEM; + + headp = (struct mm_io_header *)event; + headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); + headp->data_len = len; + record_timestamp(headp); + + if (copy_from_user(event + sizeof(*headp), buffer, len)) { + kfree(event); + return -EFAULT; + } + + relay_write(chan, event, sizeof(*headp) + len); + kfree(event); + return len; +} + +static void print_pte(unsigned long address) +{ + pgd_t *pgd = pgd_offset_k(address); + pud_t *pud = pud_offset(pgd, address); + pmd_t *pmd = pmd_offset(pud, address); + if (pmd_large(*pmd)) { + printk(KERN_EMERG MODULE_NAME ": 4MB pages are not " + "currently supported: %lx\n", + address); + BUG(); + } + printk(KERN_DEBUG MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", + address, + pte_val(*pte_offset_kernel(pmd, address)), + pte_val(*pte_offset_kernel(pmd, address)) & _PAGE_PRESENT); +} + +/* + * For some reason the pre/post pairs have been called in an + * unmatched order. Report and die. + */ +static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) +{ + const unsigned long cpu = smp_processor_id(); + printk(KERN_EMERG MODULE_NAME ": unexpected fault for address: %lx, " + "last fault for address: %lx\n", + addr, pf_reason[cpu].addr); + print_pte(addr); +#ifdef __i386__ + print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting EIP was at %s\n", + pf_reason[cpu].ip); + printk(KERN_EMERG + "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + regs->ax, regs->bx, regs->cx, regs->dx); + printk(KERN_EMERG + "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#else + print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting RIP was at %s\n", + pf_reason[cpu].ip); + printk(KERN_EMERG "rax: %016lx rcx: %016lx rdx: %016lx\n", + regs->ax, regs->cx, regs->dx); + printk(KERN_EMERG "rsi: %016lx rdi: %016lx " + "rbp: %016lx rsp: %016lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#endif + BUG(); +} + +static void pre(struct kmmio_probe *p, struct pt_regs *regs, + unsigned long addr) +{ + const unsigned long cpu = smp_processor_id(); + const unsigned long instptr = instruction_pointer(regs); + const enum reason_type type = get_ins_type(instptr); + + /* it doesn't make sense to have more than one active trace per cpu */ + if (pf_reason[cpu].active_traces) + die_kmmio_nesting_error(regs, addr); + else + pf_reason[cpu].active_traces++; + + pf_reason[cpu].type = type; + pf_reason[cpu].addr = addr; + pf_reason[cpu].ip = instptr; + + cpu_trace[cpu].header.type = MMIO_MAGIC; + cpu_trace[cpu].header.pid = 0; + cpu_trace[cpu].header.data_len = sizeof(struct mm_io_rw); + cpu_trace[cpu].rw.address = addr; + + /* + * Only record the program counter when requested. + * It may taint clean-room reverse engineering. + */ + if (trace_pc) + cpu_trace[cpu].rw.pc = instptr; + else + cpu_trace[cpu].rw.pc = 0; + + record_timestamp(&cpu_trace[cpu].header); + + switch (type) { + case REG_READ: + cpu_trace[cpu].header.type |= + (MMIO_READ << MMIO_OPCODE_SHIFT) | + (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + break; + case REG_WRITE: + cpu_trace[cpu].header.type |= + (MMIO_WRITE << MMIO_OPCODE_SHIFT) | + (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + cpu_trace[cpu].rw.value = get_ins_reg_val(instptr, regs); + break; + case IMM_WRITE: + cpu_trace[cpu].header.type |= + (MMIO_WRITE << MMIO_OPCODE_SHIFT) | + (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + cpu_trace[cpu].rw.value = get_ins_imm_val(instptr); + break; + default: + { + unsigned char *ip = (unsigned char *)instptr; + cpu_trace[cpu].header.type |= + (MMIO_UNKNOWN_OP << MMIO_OPCODE_SHIFT); + cpu_trace[cpu].rw.value = (*ip) << 16 | + *(ip + 1) << 8 | + *(ip + 2); + } + } +} + +static void post(struct kmmio_probe *p, unsigned long condition, + struct pt_regs *regs) +{ + const unsigned long cpu = smp_processor_id(); + + /* this should always return the active_trace count to 0 */ + pf_reason[cpu].active_traces--; + if (pf_reason[cpu].active_traces) { + printk(KERN_EMERG MODULE_NAME ": unexpected post handler"); + BUG(); + } + + switch (pf_reason[cpu].type) { + case REG_READ: + cpu_trace[cpu].rw.value = get_ins_reg_val(pf_reason[cpu].ip, + regs); + break; + default: + break; + } + relay_write(chan, &cpu_trace[cpu], sizeof(struct mm_io_header_rw)); +} + +/* + * subbuf_start() relay callback. + * + * Defined so that we know when events are dropped due to the buffer-full + * condition. + */ +static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, + void *prev_subbuf, size_t prev_padding) +{ + if (relay_buf_full(buf)) { + if (!suspended) { + suspended = 1; + printk(KERN_ERR MODULE_NAME + ": cpu %d buffer full!!!\n", + smp_processor_id()); + } + return 0; + } else if (suspended) { + suspended = 0; + printk(KERN_ERR MODULE_NAME + ": cpu %d buffer no longer full.\n", + smp_processor_id()); + } + + return 1; +} + +/* file_create() callback. Creates relay file in debugfs. */ +static struct dentry *create_buf_file_handler(const char *filename, + struct dentry *parent, + int mode, + struct rchan_buf *buf, + int *is_global) +{ + struct dentry *buf_file; + + mmio_fops.read = relay_file_operations.read; + mmio_fops.open = relay_file_operations.open; + mmio_fops.poll = relay_file_operations.poll; + mmio_fops.mmap = relay_file_operations.mmap; + mmio_fops.release = relay_file_operations.release; + mmio_fops.splice_read = relay_file_operations.splice_read; + + buf_file = debugfs_create_file(filename, mode, parent, buf, + &mmio_fops); + + return buf_file; +} + +/* file_remove() default callback. Removes relay file in debugfs. */ +static int remove_buf_file_handler(struct dentry *dentry) +{ + debugfs_remove(dentry); + return 0; +} + +static struct rchan_callbacks relay_callbacks = { + .subbuf_start = subbuf_start_handler, + .create_buf_file = create_buf_file_handler, + .remove_buf_file = remove_buf_file_handler, +}; + +/* + * create_channel - creates channel /debug/APP_DIR/cpuXXX + * Returns channel on success, NULL otherwise + */ +static struct rchan *create_channel(unsigned size, unsigned n) +{ + return relay_open("cpu", dir, size, n, &relay_callbacks, NULL); +} + +/* destroy_channel - destroys channel /debug/APP_DIR/cpuXXX */ +static void destroy_channel(void) +{ + if (chan) { + relay_close(chan); + chan = NULL; + } +} + +struct remap_trace { + struct list_head list; + struct kmmio_probe probe; +}; +static LIST_HEAD(trace_list); +static DEFINE_SPINLOCK(trace_list_lock); + +static void do_ioremap_trace_core(unsigned long offset, unsigned long size, + void __iomem *addr) +{ + struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); + struct mm_io_header_map event = { + .header = { + .type = MMIO_MAGIC | + (MMIO_PROBE << MMIO_OPCODE_SHIFT), + .sec = 0, + .nsec = 0, + .pid = 0, + .data_len = sizeof(struct mm_io_map) + }, + .map = { + .phys = offset, + .addr = (unsigned long)addr, + .len = size, + .pc = 0 + } + }; + record_timestamp(&event.header); + + *trace = (struct remap_trace) { + .probe = { + .addr = (unsigned long)addr, + .len = size, + .pre_handler = pre, + .post_handler = post, + } + }; + + relay_write(chan, &event, sizeof(event)); + spin_lock(&trace_list_lock); + list_add_tail(&trace->list, &trace_list); + spin_unlock(&trace_list_lock); + if (!nommiotrace) + register_kmmio_probe(&trace->probe); +} + +static void ioremap_trace_core(unsigned long offset, unsigned long size, + void __iomem *addr) +{ + if ((filter_offset) && (offset != filter_offset)) + return; + + /* Don't trace the low PCI/ISA area, it's always mapped.. */ + if (!ISA_trace && (offset < ISA_END_ADDRESS) && + (offset + size > ISA_START_ADDRESS)) { + printk(KERN_NOTICE MODULE_NAME ": Ignoring map of low " + "PCI/ISA area (0x%lx-0x%lx)\n", + offset, offset + size); + return; + } + do_ioremap_trace_core(offset, size, addr); +} + +void __iomem *ioremap_cache_trace(unsigned long offset, unsigned long size) +{ + void __iomem *p = ioremap_cache(offset, size); + printk(KERN_DEBUG MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", + offset, size, p); + ioremap_trace_core(offset, size, p); + return p; +} +EXPORT_SYMBOL(ioremap_cache_trace); + +void __iomem *ioremap_nocache_trace(unsigned long offset, unsigned long size) +{ + void __iomem *p = ioremap_nocache(offset, size); + printk(KERN_DEBUG MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", + offset, size, p); + ioremap_trace_core(offset, size, p); + return p; +} +EXPORT_SYMBOL(ioremap_nocache_trace); + +void iounmap_trace(volatile void __iomem *addr) +{ + struct mm_io_header_map event = { + .header = { + .type = MMIO_MAGIC | + (MMIO_UNPROBE << MMIO_OPCODE_SHIFT), + .sec = 0, + .nsec = 0, + .pid = 0, + .data_len = sizeof(struct mm_io_map) + }, + .map = { + .phys = 0, + .addr = (unsigned long)addr, + .len = 0, + .pc = 0 + } + }; + struct remap_trace *trace; + struct remap_trace *tmp; + printk(KERN_DEBUG MODULE_NAME ": Unmapping %p.\n", addr); + record_timestamp(&event.header); + + spin_lock(&trace_list_lock); + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + if ((unsigned long)addr == trace->probe.addr) { + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + list_del(&trace->list); + kfree(trace); + break; + } + } + spin_unlock(&trace_list_lock); + relay_write(chan, &event, sizeof(event)); + iounmap(addr); +} +EXPORT_SYMBOL(iounmap_trace); + +static void clear_trace_list(void) +{ + struct remap_trace *trace; + struct remap_trace *tmp; + + spin_lock(&trace_list_lock); + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + printk(KERN_WARNING MODULE_NAME ": purging non-iounmapped " + "trace @0x%08lx, size 0x%lx.\n", + trace->probe.addr, trace->probe.len); + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + list_del(&trace->list); + kfree(trace); + break; + } + spin_unlock(&trace_list_lock); +} + +static int __init init(void) +{ + if (n_subbufs < 2) + return -EINVAL; + + dir = debugfs_create_dir(APP_DIR, NULL); + if (!dir) { + printk(KERN_ERR MODULE_NAME + ": Couldn't create relay app directory.\n"); + return -ENOMEM; + } + + chan = create_channel(subbuf_size, n_subbufs); + if (!chan) { + debugfs_remove(dir); + printk(KERN_ERR MODULE_NAME + ": relay app channel creation failed\n"); + return -ENOMEM; + } + + init_kmmio(); + + proc_marker_file = create_proc_entry(MARKER_FILE, 0, NULL); + if (proc_marker_file) + proc_marker_file->write_proc = write_marker; + + printk(KERN_DEBUG MODULE_NAME ": loaded.\n"); + if (nommiotrace) + printk(KERN_DEBUG MODULE_NAME ": MMIO tracing disabled.\n"); + if (ISA_trace) + printk(KERN_WARNING MODULE_NAME + ": Warning! low ISA range will be traced.\n"); + return 0; +} + +static void __exit cleanup(void) +{ + printk(KERN_DEBUG MODULE_NAME ": unload...\n"); + clear_trace_list(); + cleanup_kmmio(); + remove_proc_entry(MARKER_FILE, NULL); + destroy_channel(); + if (dir) + debugfs_remove(dir); +} + +module_init(init); +module_exit(cleanup); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/mmiotrace/pf_in.c b/arch/x86/kernel/mmiotrace/pf_in.c new file mode 100644 index 000000000000..67ea520dde62 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/pf_in.c @@ -0,0 +1,489 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +/* $Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp $ + * Copyright by Intel Crop., 2002 + * Louis Zhuang (louis.zhuang@intel.com) + * + * Bjorn Steinbrink (B.Steinbrink@gmx.de), 2007 + */ + +#include +#include /* struct pt_regs */ +#include "pf_in.h" + +#ifdef __i386__ +/* IA32 Manual 3, 2-1 */ +static unsigned char prefix_codes[] = { + 0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64, + 0x65, 0x2E, 0x3E, 0x66, 0x67 +}; +/* IA32 Manual 3, 3-432*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +/* IA32 Manual 3, 3-432*/ +static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 }; +static unsigned int rw32[] = { + 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F }; +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 }; +static unsigned int mw64[] = {}; +#else /* not __i386__ */ +static unsigned char prefix_codes[] = { + 0x66, 0x67, 0x2E, 0x3E, 0x26, 0x64, 0x65, 0x36, + 0xF0, 0xF3, 0xF2, + /* REX Prefixes */ + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f +}; +/* AMD64 Manual 3, Appendix A*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +static unsigned int rw8[] = { 0xC6, 0x88, 0x8A }; +static unsigned int rw32[] = { + 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +/* 8 bit only */ +static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F }; +/* 16 bit only */ +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +/* 16 or 32 bit */ +static unsigned int mw32[] = { 0xC7 }; +/* 16, 32 or 64 bit */ +static unsigned int mw64[] = { 0x89, 0x8B }; +#endif /* not __i386__ */ + +static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged, + int *rexr) +{ + int i; + unsigned char *p = addr; + *shorted = 0; + *enlarged = 0; + *rexr = 0; + +restart: + for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) { + if (*p == prefix_codes[i]) { + if (*p == 0x66) + *shorted = 1; +#ifdef __amd64__ + if ((*p & 0xf8) == 0x48) + *enlarged = 1; + if ((*p & 0xf4) == 0x44) + *rexr = 1; +#endif + p++; + goto restart; + } + } + + return (p - addr); +} + +static int get_opcode(unsigned char *addr, unsigned int *opcode) +{ + int len; + + if (*addr == 0x0F) { + /* 0x0F is extension instruction */ + *opcode = *(unsigned short *)addr; + len = 2; + } else { + *opcode = *addr; + len = 1; + } + + return len; +} + +#define CHECK_OP_TYPE(opcode, array, type) \ + for (i = 0; i < ARRAY_SIZE(array); i++) { \ + if (array[i] == opcode) { \ + rv = type; \ + goto exit; \ + } \ + } + +enum reason_type get_ins_type(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int shorted, enlarged, rexr; + int i; + enum reason_type rv = OTHERS; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + CHECK_OP_TYPE(opcode, reg_rop, REG_READ); + CHECK_OP_TYPE(opcode, reg_wop, REG_WRITE); + CHECK_OP_TYPE(opcode, imm_wop, IMM_WRITE); + +exit: + return rv; +} +#undef CHECK_OP_TYPE + +static unsigned int get_ins_reg_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(rw8); i++) + if (rw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(rw32); i++) + if (rw32[i] == opcode) + return (shorted ? 2 : (enlarged ? 8 : 4)); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +unsigned int get_ins_mem_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(mw8); i++) + if (mw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(mw16); i++) + if (mw16[i] == opcode) + return 2; + + for (i = 0; i < ARRAY_SIZE(mw32); i++) + if (mw32[i] == opcode) + return shorted ? 2 : 4; + + for (i = 0; i < ARRAY_SIZE(mw64); i++) + if (mw64[i] == opcode) + return shorted ? 2 : (enlarged ? 8 : 4); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +/* + * Define register ident in mod/rm byte. + * Note: these are NOT the same as in ptrace-abi.h. + */ +enum { + arg_AL = 0, + arg_CL = 1, + arg_DL = 2, + arg_BL = 3, + arg_AH = 4, + arg_CH = 5, + arg_DH = 6, + arg_BH = 7, + + arg_AX = 0, + arg_CX = 1, + arg_DX = 2, + arg_BX = 3, + arg_SP = 4, + arg_BP = 5, + arg_SI = 6, + arg_DI = 7, +#ifdef __amd64__ + arg_R8 = 8, + arg_R9 = 9, + arg_R10 = 10, + arg_R11 = 11, + arg_R12 = 12, + arg_R13 = 13, + arg_R14 = 14, + arg_R15 = 15 +#endif +}; + +static unsigned char *get_reg_w8(int no, struct pt_regs *regs) +{ + unsigned char *rv = NULL; + + switch (no) { + case arg_AL: + rv = (unsigned char *)®s->ax; + break; + case arg_BL: + rv = (unsigned char *)®s->bx; + break; + case arg_CL: + rv = (unsigned char *)®s->cx; + break; + case arg_DL: + rv = (unsigned char *)®s->dx; + break; + case arg_AH: + rv = 1 + (unsigned char *)®s->ax; + break; + case arg_BH: + rv = 1 + (unsigned char *)®s->bx; + break; + case arg_CH: + rv = 1 + (unsigned char *)®s->cx; + break; + case arg_DH: + rv = 1 + (unsigned char *)®s->dx; + break; +#ifdef __amd64__ + case arg_R8: + rv = (unsigned char *)®s->r8; + break; + case arg_R9: + rv = (unsigned char *)®s->r9; + break; + case arg_R10: + rv = (unsigned char *)®s->r10; + break; + case arg_R11: + rv = (unsigned char *)®s->r11; + break; + case arg_R12: + rv = (unsigned char *)®s->r12; + break; + case arg_R13: + rv = (unsigned char *)®s->r13; + break; + case arg_R14: + rv = (unsigned char *)®s->r14; + break; + case arg_R15: + rv = (unsigned char *)®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + break; + } + return rv; +} + +static unsigned long *get_reg_w32(int no, struct pt_regs *regs) +{ + unsigned long *rv = NULL; + + switch (no) { + case arg_AX: + rv = ®s->ax; + break; + case arg_BX: + rv = ®s->bx; + break; + case arg_CX: + rv = ®s->cx; + break; + case arg_DX: + rv = ®s->dx; + break; + case arg_SP: + rv = ®s->sp; + break; + case arg_BP: + rv = ®s->bp; + break; + case arg_SI: + rv = ®s->si; + break; + case arg_DI: + rv = ®s->di; + break; +#ifdef __amd64__ + case arg_R8: + rv = ®s->r8; + break; + case arg_R9: + rv = ®s->r9; + break; + case arg_R10: + rv = ®s->r10; + break; + case arg_R11: + rv = ®s->r11; + break; + case arg_R12: + rv = ®s->r12; + break; + case arg_R13: + rv = ®s->r13; + break; + case arg_R14: + rv = ®s->r14; + break; + case arg_R15: + rv = ®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + } + + return rv; +} + +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) +{ + unsigned int opcode; + unsigned char mod_rm; + int reg; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(reg_rop); i++) + if (reg_rop[i] == opcode) { + rv = REG_READ; + goto do_work; + } + + for (i = 0; i < ARRAY_SIZE(reg_wop); i++) + if (reg_wop[i] == opcode) { + rv = REG_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not a register instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + reg = ((mod_rm >> 3) & 0x7) | (rexr << 3); + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *get_reg_w8(reg, regs); + + case 2: + return *(unsigned short *)get_reg_w32(reg, regs); + + case 4: + return *(unsigned int *)get_reg_w32(reg, regs); + +#ifdef __amd64__ + case 8: + return *(unsigned long *)get_reg_w32(reg, regs); +#endif + + default: + printk(KERN_ERR "mmiotrace: Error width# %d\n", reg); + } + +err: + return 0; +} + +unsigned long get_ins_imm_val(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char mod_rm; + unsigned char mod; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(imm_wop); i++) + if (imm_wop[i] == opcode) { + rv = IMM_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + mod = mod_rm >> 6; + p++; + switch (mod) { + case 0: + /* if r/m is 5 we have a 32 disp (IA32 Manual 3, Table 2-2) */ + /* AMD64: XXX Check for address size prefix? */ + if ((mod_rm & 0x7) == 0x5) + p += 4; + break; + + case 1: + p += 1; + break; + + case 2: + p += 4; + break; + + case 3: + default: + printk(KERN_ERR "mmiotrace: not a memory access instruction " + "at 0x%lx, rm_mod=0x%02x\n", + ins_addr, mod_rm); + } + + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *(unsigned char *)p; + + case 2: + return *(unsigned short *)p; + + case 4: + return *(unsigned int *)p; + +#ifdef __amd64__ + case 8: + return *(unsigned long *)p; +#endif + + default: + printk(KERN_ERR "mmiotrace: Error: width.\n"); + } + +err: + return 0; +} diff --git a/arch/x86/kernel/mmiotrace/pf_in.h b/arch/x86/kernel/mmiotrace/pf_in.h new file mode 100644 index 000000000000..e05341a51a27 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/pf_in.h @@ -0,0 +1,39 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +#ifndef __PF_H_ +#define __PF_H_ + +enum reason_type { + NOT_ME, /* page fault is not in regions */ + NOTHING, /* access others point in regions */ + REG_READ, /* read from addr to reg */ + REG_WRITE, /* write from reg to addr */ + IMM_WRITE, /* write from imm to addr */ + OTHERS /* Other instructions can not intercept */ +}; + +enum reason_type get_ins_type(unsigned long ins_addr); +unsigned int get_ins_mem_width(unsigned long ins_addr); +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs); +unsigned long get_ins_imm_val(unsigned long ins_addr); + +#endif /* __PF_H_ */ diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c new file mode 100644 index 000000000000..40e66b0e6480 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/testmmiotrace.c @@ -0,0 +1,77 @@ +/* + * Written by Pekka Paalanen, 2008 + */ +#include +#include + +extern void __iomem *ioremap_nocache_trace(unsigned long offset, + unsigned long size); +extern void iounmap_trace(volatile void __iomem *addr); + +#define MODULE_NAME "testmmiotrace" + +static unsigned long mmio_address; +module_param(mmio_address, ulong, 0); +MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB."); + +static void do_write_test(void __iomem *p) +{ + unsigned int i; + for (i = 0; i < 256; i++) + iowrite8(i, p + i); + for (i = 1024; i < (5 * 1024); i += 2) + iowrite16(i * 12 + 7, p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + iowrite32(i * 212371 + 13, p + i); +} + +static void do_read_test(void __iomem *p) +{ + unsigned int i; + volatile unsigned int v; + for (i = 0; i < 256; i++) + v = ioread8(p + i); + for (i = 1024; i < (5 * 1024); i += 2) + v = ioread16(p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + v = ioread32(p + i); +} + +static void do_test(void) +{ + void __iomem *p = ioremap_nocache_trace(mmio_address, 0x4000); + if (!p) { + printk(KERN_ERR MODULE_NAME ": could not ioremap IO memory, " + "aborting.\n"); + return; + } + do_write_test(p); + do_read_test(p); + iounmap_trace(p); +} + +static int __init init(void) +{ + if (mmio_address == 0) { + printk(KERN_ERR MODULE_NAME ": you have to use the module " + "argument mmio_address.\n"); + printk(KERN_ERR MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" + " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); + return -ENXIO; + } + + printk(KERN_WARNING MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " + "in PCI address space, and writing " + "rubbish in there.\n", mmio_address); + do_test(); + return 0; +} + +static void __exit cleanup(void) +{ + printk(KERN_DEBUG MODULE_NAME ": unloaded.\n"); +} + +module_init(init); +module_exit(cleanup); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From 75bb88350e0501b3cf5ac096a1008757844414a9 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86 mmiotrace: use lookup_address() Use lookup_address() from pageattr.c instead of doing the same manually. Also had to EXPORT_SYMBOL_GPL(lookup_address) to make this work for modules. This also fixes "undefined symbol 'init_mm'" compile error for x86_32. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 46 ++++++++++++++++++++++++------------ arch/x86/kernel/mmiotrace/mmio-mod.c | 19 +++++++++------ arch/x86/mm/pageattr.c | 1 + 3 files changed, 44 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 8ba48f9c91b4..28411dadb8b3 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "kmmio.h" @@ -117,40 +118,55 @@ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) return NULL; } -static void arm_kmmio_fault_page(unsigned long page, int *large) +static void arm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; - pgd_t *pgd = pgd_offset_k(address); - pud_t *pud = pud_offset(pgd, address); - pmd_t *pmd = pmd_offset(pud, address); - pte_t *pte = pte_offset_kernel(pmd, address); + int level; + pte_t *pte = lookup_address(address, &level); - if (pmd_large(*pmd)) { + if (!pte) { + printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", + __FUNCTION__, page); + return; + } + + if (level == PG_LEVEL_2M) { + pmd_t *pmd = (pmd_t *)pte; set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_PRESENT)); - if (large) - *large = 1; } else { + /* PG_LEVEL_4K */ set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT)); } + if (page_level) + *page_level = level; + __flush_tlb_one(page); } -static void disarm_kmmio_fault_page(unsigned long page, int *large) +static void disarm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; - pgd_t *pgd = pgd_offset_k(address); - pud_t *pud = pud_offset(pgd, address); - pmd_t *pmd = pmd_offset(pud, address); - pte_t *pte = pte_offset_kernel(pmd, address); + int level; + pte_t *pte = lookup_address(address, &level); - if (large && *large) { + if (!pte) { + printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", + __FUNCTION__, page); + return; + } + + if (level == PG_LEVEL_2M) { + pmd_t *pmd = (pmd_t *)pte; set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_PRESENT)); - *large = 0; } else { + /* PG_LEVEL_4K */ set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT)); } + if (page_level) + *page_level = level; + __flush_tlb_one(page); } diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 73561fe85f03..e43947d218a5 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -120,19 +120,24 @@ static int write_marker(struct file *file, const char __user *buffer, static void print_pte(unsigned long address) { - pgd_t *pgd = pgd_offset_k(address); - pud_t *pud = pud_offset(pgd, address); - pmd_t *pmd = pmd_offset(pud, address); - if (pmd_large(*pmd)) { + int level; + pte_t *pte = lookup_address(address, &level); + + if (!pte) { + printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", + __FUNCTION__, address); + return; + } + + if (level == PG_LEVEL_2M) { printk(KERN_EMERG MODULE_NAME ": 4MB pages are not " "currently supported: %lx\n", address); BUG(); } printk(KERN_DEBUG MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", - address, - pte_val(*pte_offset_kernel(pmd, address)), - pte_val(*pte_offset_kernel(pmd, address)) & _PAGE_PRESENT); + address, pte_val(*pte), + pte_val(*pte) & _PAGE_PRESENT); } /* diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 60bcb5b6a37e..57970f2935c0 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -227,6 +227,7 @@ pte_t *lookup_address(unsigned long address, unsigned int *level) return pte_offset_kernel(pmd, address); } +EXPORT_SYMBOL_GPL(lookup_address); /* * Set the new pmd in all the pgds we know about: -- cgit v1.2.1 From fe1ffafa80f6673101c6560c2bacfe3df10372ee Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86 mmiotrace: fix relay-buffer-full flag for SMP Relay has per-cpu buffers, but mmiotrace was using only a single flag for detecting buffer full/not-full transitions. The new code makes this per-cpu and actually counts missed events. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/mmio-mod.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index e43947d218a5..0019dcdf6158 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -29,6 +29,7 @@ #include #include #include /* for ISA_START_ADDRESS */ +#include #include "kmmio.h" #include "pf_in.h" @@ -47,9 +48,13 @@ struct trap_reason { int active_traces; }; +/* Accessed per-cpu. */ static struct trap_reason pf_reason[NR_CPUS]; static struct mm_io_header_rw cpu_trace[NR_CPUS]; +/* Access to this is not per-cpu. */ +static atomic_t dropped[NR_CPUS]; + static struct file_operations mmio_fops = { .owner = THIS_MODULE, }; @@ -57,7 +62,6 @@ static struct file_operations mmio_fops = { static const size_t subbuf_size = 256*1024; static struct rchan *chan; static struct dentry *dir; -static int suspended; /* XXX should this be per cpu? */ static struct proc_dir_entry *proc_marker_file; /* module parameters */ @@ -269,19 +273,21 @@ static void post(struct kmmio_probe *p, unsigned long condition, static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, void *prev_subbuf, size_t prev_padding) { + unsigned int cpu = buf->cpu; + atomic_t *drop = &dropped[cpu]; + int count; if (relay_buf_full(buf)) { - if (!suspended) { - suspended = 1; - printk(KERN_ERR MODULE_NAME - ": cpu %d buffer full!!!\n", - smp_processor_id()); + if (atomic_inc_return(drop) == 1) { + printk(KERN_ERR MODULE_NAME ": cpu %d buffer full!\n", + cpu); } return 0; - } else if (suspended) { - suspended = 0; + } else if ((count = atomic_read(drop))) { printk(KERN_ERR MODULE_NAME - ": cpu %d buffer no longer full.\n", - smp_processor_id()); + ": cpu %d buffer no longer full, " + "missed %d events.\n", + cpu, count); + atomic_sub(count, drop); } return 1; -- cgit v1.2.1 From 10c43d2eb50c9a5ad60388b9d3c41c31150049e6 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86: explicit call to mmiotrace in do_page_fault() The custom page fault handler list is replaced with a single function pointer. All related functions and variables are renamed for mmiotrace. Signed-off-by: Pekka Paalanen Cc: Christoph Hellwig Cc: Arjan van de Ven Cc: pq@iki.fi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 14 ++++----- arch/x86/kernel/mmiotrace/kmmio.c | 14 ++++----- arch/x86/mm/fault.c | 66 ++++++++++++++++++++------------------- 3 files changed, 47 insertions(+), 47 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 7c6496e2225e..9491c0ae03a3 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -168,20 +168,18 @@ config IOMMU_LEAK Add a simple leak tracer to the IOMMU code. This is useful when you are debugging a buggy device driver that leaks IOMMU mappings. -config PAGE_FAULT_HANDLERS - bool "Custom page fault handlers" - depends on DEBUG_KERNEL - help - Allow the use of custom page fault handlers. A kernel module may - register a function that is called on every page fault. Custom - handlers are used by some debugging and reverse engineering tools. +config MMIOTRACE_HOOKS + bool + default n config MMIOTRACE tristate "Memory mapped IO tracing" - depends on DEBUG_KERNEL && PAGE_FAULT_HANDLERS && RELAY && DEBUG_FS + depends on DEBUG_KERNEL && RELAY && DEBUG_FS + select MMIOTRACE_HOOKS default n help This will build a kernel module called mmiotrace. + Making this a built-in is heavily discouraged. Mmiotrace traces Memory Mapped I/O access and is meant for debugging and reverse engineering. The kernel module offers wrapped diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 28411dadb8b3..e759f7c3878f 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -51,10 +51,6 @@ static LIST_HEAD(kmmio_probes); static struct kmmio_context kmmio_ctx[NR_CPUS]; -static struct pf_handler kmmio_pf_hook = { - .handler = kmmio_page_fault -}; - static struct notifier_block nb_die = { .notifier_call = kmmio_die_notifier }; @@ -77,7 +73,8 @@ void cleanup_kmmio(void) * kmmio_page_table, kmmio_probes */ if (handler_registered) { - unregister_page_fault_handler(&kmmio_pf_hook); + if (mmiotrace_unregister_pf(&kmmio_page_fault)) + BUG(); synchronize_rcu(); } unregister_die_notifier(&nb_die); @@ -343,8 +340,11 @@ int register_kmmio_probe(struct kmmio_probe *p) } if (!handler_registered) { - register_page_fault_handler(&kmmio_pf_hook); - handler_registered++; + if (mmiotrace_register_pf(&kmmio_page_fault)) + printk(KERN_ERR "mmiotrace: Cannot register page " + "fault handler.\n"); + else + handler_registered++; } out: diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 343f5c1aacc8..e9a086a1a9ff 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -49,53 +49,55 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) -#ifdef CONFIG_PAGE_FAULT_HANDLERS -static HLIST_HEAD(pf_handlers); /* protected by RCU */ -static DEFINE_SPINLOCK(pf_handlers_writer); +#ifdef CONFIG_MMIOTRACE_HOOKS +static pf_handler_func mmiotrace_pf_handler; /* protected by RCU */ +static DEFINE_SPINLOCK(mmiotrace_handler_lock); -void register_page_fault_handler(struct pf_handler *new_pfh) +int mmiotrace_register_pf(pf_handler_func new_pfh) { + int ret = 0; unsigned long flags; - spin_lock_irqsave(&pf_handlers_writer, flags); - hlist_add_head_rcu(&new_pfh->hlist, &pf_handlers); - spin_unlock_irqrestore(&pf_handlers_writer, flags); + spin_lock_irqsave(&mmiotrace_handler_lock, flags); + if (mmiotrace_pf_handler) + ret = -EBUSY; + else + mmiotrace_pf_handler = new_pfh; + spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); + return ret; } -EXPORT_SYMBOL_GPL(register_page_fault_handler); +EXPORT_SYMBOL_GPL(mmiotrace_register_pf); /** - * unregister_page_fault_handler: + * mmiotrace_unregister_pf: * The caller must ensure @old_pfh is not in use anymore before freeing it. - * This function does not guarantee it. The list of handlers is protected by - * RCU, so you can do this by e.g. calling synchronize_rcu(). + * This function does not guarantee it. The handler function pointer is + * protected by RCU, so you can do this by e.g. calling synchronize_rcu(). */ -void unregister_page_fault_handler(struct pf_handler *old_pfh) +int mmiotrace_unregister_pf(pf_handler_func old_pfh) { + int ret = 0; unsigned long flags; - spin_lock_irqsave(&pf_handlers_writer, flags); - hlist_del_rcu(&old_pfh->hlist); - spin_unlock_irqrestore(&pf_handlers_writer, flags); + spin_lock_irqsave(&mmiotrace_handler_lock, flags); + if (mmiotrace_pf_handler != old_pfh) + ret = -EPERM; + else + mmiotrace_pf_handler = NULL; + spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); + return ret; } -EXPORT_SYMBOL_GPL(unregister_page_fault_handler); -#endif +EXPORT_SYMBOL_GPL(mmiotrace_unregister_pf); +#endif /* CONFIG_MMIOTRACE_HOOKS */ /* returns non-zero if do_page_fault() should return */ -static int handle_custom_pf(struct pt_regs *regs, unsigned long error_code, - unsigned long address) +static inline int call_mmiotrace(struct pt_regs *regs, + unsigned long error_code, + unsigned long address) { -#ifdef CONFIG_PAGE_FAULT_HANDLERS +#ifdef CONFIG_MMIOTRACE_HOOKS int ret = 0; - struct pf_handler *cur; - struct hlist_node *ncur; - - if (hlist_empty(&pf_handlers)) - return 0; - rcu_read_lock(); - hlist_for_each_entry_rcu(cur, ncur, &pf_handlers, hlist) { - ret = cur->handler(regs, error_code, address); - if (ret) - break; - } + if (mmiotrace_pf_handler) + ret = mmiotrace_pf_handler(regs, error_code, address); rcu_read_unlock(); return ret; #else @@ -655,7 +657,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) if (notify_page_fault(regs)) return; - if (handle_custom_pf(regs, error_code, address)) + if (call_mmiotrace(regs, error_code, address)) return; /* -- cgit v1.2.1 From f513638030ca384b0bace4df64f0b82f6ae1e4c6 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86 mmiotrace: Use percpu instead of arrays. Signed-off-by: Pekka Paalanen Cc: Eric Dumazet Cc: pq@iki.fi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 27 ++++++------ arch/x86/kernel/mmiotrace/mmio-mod.c | 80 +++++++++++++++++++----------------- 2 files changed, 58 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index e759f7c3878f..5e239d0b8467 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -49,7 +50,8 @@ static unsigned int handler_registered; static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; static LIST_HEAD(kmmio_probes); -static struct kmmio_context kmmio_ctx[NR_CPUS]; +/* Accessed per-cpu */ +static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); static struct notifier_block nb_die = { .notifier_call = kmmio_die_notifier @@ -173,8 +175,7 @@ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) */ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) { - struct kmmio_context *ctx; - int cpu; + struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); /* * Preemption is now disabled to prevent process switch during @@ -187,8 +188,6 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) * And that interrupt triggers a kmmio trap? */ preempt_disable(); - cpu = smp_processor_id(); - ctx = &kmmio_ctx[cpu]; /* interrupts disabled and CPU-local data => atomicity guaranteed. */ if (ctx->active) { @@ -199,7 +198,7 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) */ printk(KERN_EMERG "mmiotrace: recursive probe hit on CPU %d, " "for address %lu. Ignoring.\n", - cpu, addr); + smp_processor_id(), addr); goto no_kmmio; } ctx->active++; @@ -231,6 +230,7 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) /* We hold lock, now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); + put_cpu_var(kmmio_ctx); return 1; no_kmmio_locked: @@ -238,6 +238,7 @@ no_kmmio_locked: ctx->active--; no_kmmio: preempt_enable_no_resched(); + put_cpu_var(kmmio_ctx); /* page fault not handled by kmmio */ return 0; } @@ -249,11 +250,11 @@ no_kmmio: */ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) { - int cpu = smp_processor_id(); - struct kmmio_context *ctx = &kmmio_ctx[cpu]; + int ret = 0; + struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) - return 0; + goto out; if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); @@ -273,10 +274,12 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) * will have TF set, in which case, continue the remaining processing * of do_debug, as if this is not a probe hit. */ - if (regs->flags & TF_MASK) - return 0; + if (!(regs->flags & TF_MASK)) + ret = 1; - return 1; +out: + put_cpu_var(kmmio_ctx); + return ret; } static int add_kmmio_fault_page(unsigned long page) diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 0019dcdf6158..f9c609266d83 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -30,6 +30,7 @@ #include #include /* for ISA_START_ADDRESS */ #include +#include #include "kmmio.h" #include "pf_in.h" @@ -49,11 +50,11 @@ struct trap_reason { }; /* Accessed per-cpu. */ -static struct trap_reason pf_reason[NR_CPUS]; -static struct mm_io_header_rw cpu_trace[NR_CPUS]; +static DEFINE_PER_CPU(struct trap_reason, pf_reason); +static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); /* Access to this is not per-cpu. */ -static atomic_t dropped[NR_CPUS]; +static DEFINE_PER_CPU(atomic_t, dropped); static struct file_operations mmio_fops = { .owner = THIS_MODULE, @@ -150,15 +151,15 @@ static void print_pte(unsigned long address) */ static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { - const unsigned long cpu = smp_processor_id(); + const struct trap_reason *my_reason = &get_cpu_var(pf_reason); printk(KERN_EMERG MODULE_NAME ": unexpected fault for address: %lx, " "last fault for address: %lx\n", - addr, pf_reason[cpu].addr); + addr, my_reason->addr); print_pte(addr); #ifdef __i386__ print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting EIP was at %s\n", - pf_reason[cpu].ip); + my_reason->ip); printk(KERN_EMERG "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); @@ -168,100 +169,105 @@ static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) #else print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting RIP was at %s\n", - pf_reason[cpu].ip); + my_reason->ip); printk(KERN_EMERG "rax: %016lx rcx: %016lx rdx: %016lx\n", regs->ax, regs->cx, regs->dx); printk(KERN_EMERG "rsi: %016lx rdi: %016lx " "rbp: %016lx rsp: %016lx\n", regs->si, regs->di, regs->bp, regs->sp); #endif + put_cpu_var(pf_reason); BUG(); } static void pre(struct kmmio_probe *p, struct pt_regs *regs, unsigned long addr) { - const unsigned long cpu = smp_processor_id(); + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); const unsigned long instptr = instruction_pointer(regs); const enum reason_type type = get_ins_type(instptr); /* it doesn't make sense to have more than one active trace per cpu */ - if (pf_reason[cpu].active_traces) + if (my_reason->active_traces) die_kmmio_nesting_error(regs, addr); else - pf_reason[cpu].active_traces++; + my_reason->active_traces++; - pf_reason[cpu].type = type; - pf_reason[cpu].addr = addr; - pf_reason[cpu].ip = instptr; + my_reason->type = type; + my_reason->addr = addr; + my_reason->ip = instptr; - cpu_trace[cpu].header.type = MMIO_MAGIC; - cpu_trace[cpu].header.pid = 0; - cpu_trace[cpu].header.data_len = sizeof(struct mm_io_rw); - cpu_trace[cpu].rw.address = addr; + my_trace->header.type = MMIO_MAGIC; + my_trace->header.pid = 0; + my_trace->header.data_len = sizeof(struct mm_io_rw); + my_trace->rw.address = addr; /* * Only record the program counter when requested. * It may taint clean-room reverse engineering. */ if (trace_pc) - cpu_trace[cpu].rw.pc = instptr; + my_trace->rw.pc = instptr; else - cpu_trace[cpu].rw.pc = 0; + my_trace->rw.pc = 0; - record_timestamp(&cpu_trace[cpu].header); + record_timestamp(&my_trace->header); switch (type) { case REG_READ: - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_READ << MMIO_OPCODE_SHIFT) | (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); break; case REG_WRITE: - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_WRITE << MMIO_OPCODE_SHIFT) | (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - cpu_trace[cpu].rw.value = get_ins_reg_val(instptr, regs); + my_trace->rw.value = get_ins_reg_val(instptr, regs); break; case IMM_WRITE: - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_WRITE << MMIO_OPCODE_SHIFT) | (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - cpu_trace[cpu].rw.value = get_ins_imm_val(instptr); + my_trace->rw.value = get_ins_imm_val(instptr); break; default: { unsigned char *ip = (unsigned char *)instptr; - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_UNKNOWN_OP << MMIO_OPCODE_SHIFT); - cpu_trace[cpu].rw.value = (*ip) << 16 | - *(ip + 1) << 8 | - *(ip + 2); + my_trace->rw.value = (*ip) << 16 | *(ip + 1) << 8 | + *(ip + 2); } } + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); } static void post(struct kmmio_probe *p, unsigned long condition, struct pt_regs *regs) { - const unsigned long cpu = smp_processor_id(); + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); /* this should always return the active_trace count to 0 */ - pf_reason[cpu].active_traces--; - if (pf_reason[cpu].active_traces) { + my_reason->active_traces--; + if (my_reason->active_traces) { printk(KERN_EMERG MODULE_NAME ": unexpected post handler"); BUG(); } - switch (pf_reason[cpu].type) { + switch (my_reason->type) { case REG_READ: - cpu_trace[cpu].rw.value = get_ins_reg_val(pf_reason[cpu].ip, - regs); + my_trace->rw.value = get_ins_reg_val(my_reason->ip, regs); break; default: break; } - relay_write(chan, &cpu_trace[cpu], sizeof(struct mm_io_header_rw)); + relay_write(chan, my_trace, sizeof(*my_trace)); + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); } /* @@ -274,7 +280,7 @@ static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, void *prev_subbuf, size_t prev_padding) { unsigned int cpu = buf->cpu; - atomic_t *drop = &dropped[cpu]; + atomic_t *drop = &per_cpu(dropped, cpu); int count; if (relay_buf_full(buf)) { if (atomic_inc_return(drop) == 1) { -- cgit v1.2.1 From 0fd0e3da4557c479b820b9a4a7afa25b4637ddf2 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/init_task.c | 1 - arch/x86/kernel/mmiotrace/Makefile | 8 +- arch/x86/kernel/mmiotrace/kmmio.c | 349 ++++++++++++++++++++---------- arch/x86/kernel/mmiotrace/kmmio.h | 58 ----- arch/x86/kernel/mmiotrace/mmio-mod.c | 81 ++++--- arch/x86/kernel/mmiotrace/pf_in.c | 2 +- arch/x86/kernel/mmiotrace/testmmiotrace.c | 13 +- arch/x86/mm/fault.c | 59 +---- 8 files changed, 297 insertions(+), 274 deletions(-) delete mode 100644 arch/x86/kernel/mmiotrace/kmmio.h (limited to 'arch') diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c index 027a5b6a12b2..a4f93b4120c1 100644 --- a/arch/x86/kernel/init_task.c +++ b/arch/x86/kernel/init_task.c @@ -15,7 +15,6 @@ static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */ -EXPORT_SYMBOL_GPL(init_mm); /* * Initial thread structure. diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile index d6905f7f981b..cf1e747b463e 100644 --- a/arch/x86/kernel/mmiotrace/Makefile +++ b/arch/x86/kernel/mmiotrace/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_MMIOTRACE) += mmiotrace.o -mmiotrace-objs := pf_in.o kmmio.o mmio-mod.o - -obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o +obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o +obj-$(CONFIG_MMIOTRACE) += mmiotrace.o +mmiotrace-objs := pf_in.o mmio-mod.o +obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 5e239d0b8467..539a9b19588f 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include @@ -17,70 +18,119 @@ #include #include #include +#include #include #include #include #include #include -#include "kmmio.h" +#include -#define KMMIO_HASH_BITS 6 -#define KMMIO_TABLE_SIZE (1 << KMMIO_HASH_BITS) #define KMMIO_PAGE_HASH_BITS 4 #define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) +struct kmmio_fault_page { + struct list_head list; + struct kmmio_fault_page *release_next; + unsigned long page; /* location of the fault page */ + + /* + * Number of times this page has been registered as a part + * of a probe. If zero, page is disarmed and this may be freed. + * Used only by writers (RCU). + */ + int count; +}; + +struct kmmio_delayed_release { + struct rcu_head rcu; + struct kmmio_fault_page *release_list; +}; + struct kmmio_context { struct kmmio_fault_page *fpage; struct kmmio_probe *probe; unsigned long saved_flags; + unsigned long addr; int active; }; -static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, - unsigned long address); static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args); +static DECLARE_MUTEX(kmmio_init_mutex); static DEFINE_SPINLOCK(kmmio_lock); /* These are protected by kmmio_lock */ +static int kmmio_initialized; unsigned int kmmio_count; -static unsigned int handler_registered; + +/* Read-protected by RCU, write-protected by kmmio_lock. */ static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; static LIST_HEAD(kmmio_probes); +static struct list_head *kmmio_page_list(unsigned long page) +{ + return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; +} + /* Accessed per-cpu */ static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); +/* protected by kmmio_init_mutex */ static struct notifier_block nb_die = { .notifier_call = kmmio_die_notifier }; -int init_kmmio(void) +/** + * Makes sure kmmio is initialized and usable. + * This must be called before any other kmmio function defined here. + * May sleep. + */ +void reference_kmmio(void) { - int i; - for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) - INIT_LIST_HEAD(&kmmio_page_table[i]); - - register_die_notifier(&nb_die); - return 0; + down(&kmmio_init_mutex); + spin_lock_irq(&kmmio_lock); + if (!kmmio_initialized) { + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + if (register_die_notifier(&nb_die)) + BUG(); + } + kmmio_initialized++; + spin_unlock_irq(&kmmio_lock); + up(&kmmio_init_mutex); } +EXPORT_SYMBOL_GPL(reference_kmmio); -void cleanup_kmmio(void) +/** + * Clean up kmmio after use. This must be called for every call to + * reference_kmmio(). All probes registered after the corresponding + * reference_kmmio() must have been unregistered when calling this. + * May sleep. + */ +void unreference_kmmio(void) { - /* - * Assume the following have been already cleaned by calling - * unregister_kmmio_probe() appropriately: - * kmmio_page_table, kmmio_probes - */ - if (handler_registered) { - if (mmiotrace_unregister_pf(&kmmio_page_fault)) - BUG(); - synchronize_rcu(); + bool unreg = false; + + down(&kmmio_init_mutex); + spin_lock_irq(&kmmio_lock); + + if (kmmio_initialized == 1) { + BUG_ON(is_kmmio_active()); + unreg = true; } - unregister_die_notifier(&nb_die); + kmmio_initialized--; + BUG_ON(kmmio_initialized < 0); + spin_unlock_irq(&kmmio_lock); + + if (unreg) + unregister_die_notifier(&nb_die); /* calls sync_rcu() */ + up(&kmmio_init_mutex); } +EXPORT_SYMBOL(unreference_kmmio); /* * this is basically a dynamic stabbing problem: @@ -90,33 +140,33 @@ void cleanup_kmmio(void) * Overlap a Point (might be simple) * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup */ -/* Get the kmmio at this addr (if any). You must be holding kmmio_lock. */ +/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */ static struct kmmio_probe *get_kmmio_probe(unsigned long addr) { struct kmmio_probe *p; - list_for_each_entry(p, &kmmio_probes, list) { + list_for_each_entry_rcu(p, &kmmio_probes, list) { if (addr >= p->addr && addr <= (p->addr + p->len)) return p; } return NULL; } +/* You must be holding RCU read lock. */ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) { - struct list_head *head, *tmp; + struct list_head *head; + struct kmmio_fault_page *p; page &= PAGE_MASK; - head = &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; - list_for_each(tmp, head) { - struct kmmio_fault_page *p - = list_entry(tmp, struct kmmio_fault_page, list); + head = kmmio_page_list(page); + list_for_each_entry_rcu(p, head, list) { if (p->page == page) return p; } - return NULL; } +/** Mark the given page as not present. Access to it will trigger a fault. */ static void arm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; @@ -124,8 +174,8 @@ static void arm_kmmio_fault_page(unsigned long page, int *page_level) pte_t *pte = lookup_address(address, &level); if (!pte) { - printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", - __FUNCTION__, page); + pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", + __func__, page); return; } @@ -143,6 +193,7 @@ static void arm_kmmio_fault_page(unsigned long page, int *page_level) __flush_tlb_one(page); } +/** Mark the given page as present. */ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; @@ -150,8 +201,8 @@ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) pte_t *pte = lookup_address(address, &level); if (!pte) { - printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", - __FUNCTION__, page); + pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", + __func__, page); return; } @@ -169,13 +220,25 @@ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) __flush_tlb_one(page); } +/* + * This is being called from do_page_fault(). + * + * We may be in an interrupt or a critical section. Also prefecthing may + * trigger a page fault. We may be in the middle of process switch. + * We cannot take any locks, because we could be executing especially + * within a kmmio critical section. + * + * Local interrupts are disabled, so preemption cannot happen. + * Do not enable interrupts, do not sleep, and watch out for other CPUs. + */ /* * Interrupts are disabled on entry as trap3 is an interrupt gate * and they remain disabled thorough out this function. */ -static int kmmio_handler(struct pt_regs *regs, unsigned long addr) +int kmmio_handler(struct pt_regs *regs, unsigned long addr) { - struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); + struct kmmio_context *ctx; + struct kmmio_fault_page *faultpage; /* * Preemption is now disabled to prevent process switch during @@ -186,40 +249,40 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) * XXX what if an interrupt occurs between returning from * do_page_fault() and entering the single-step exception handler? * And that interrupt triggers a kmmio trap? + * XXX If we tracing an interrupt service routine or whatever, is + * this enough to keep it on the current cpu? */ preempt_disable(); - /* interrupts disabled and CPU-local data => atomicity guaranteed. */ + rcu_read_lock(); + faultpage = get_kmmio_fault_page(addr); + if (!faultpage) { + /* + * Either this page fault is not caused by kmmio, or + * another CPU just pulled the kmmio probe from under + * our feet. In the latter case all hell breaks loose. + */ + goto no_kmmio; + } + + ctx = &get_cpu_var(kmmio_ctx); if (ctx->active) { /* - * This avoids a deadlock with kmmio_lock. + * Prevent overwriting already in-flight context. * If this page fault really was due to kmmio trap, * all hell breaks loose. */ - printk(KERN_EMERG "mmiotrace: recursive probe hit on CPU %d, " - "for address %lu. Ignoring.\n", + pr_emerg("kmmio: recursive probe hit on CPU %d, " + "for address 0x%08lx. Ignoring.\n", smp_processor_id(), addr); - goto no_kmmio; + goto no_kmmio_ctx; } ctx->active++; - /* - * Acquire the kmmio lock to prevent changes affecting - * get_kmmio_fault_page() and get_kmmio_probe(), since we save their - * returned pointers. - * The lock is released in post_kmmio_handler(). - * XXX: could/should get_kmmio_*() be using RCU instead of spinlock? - */ - spin_lock(&kmmio_lock); - - ctx->fpage = get_kmmio_fault_page(addr); - if (!ctx->fpage) { - /* this page fault is not caused by kmmio */ - goto no_kmmio_locked; - } - + ctx->fpage = faultpage; ctx->probe = get_kmmio_probe(addr); ctx->saved_flags = (regs->flags & (TF_MASK|IF_MASK)); + ctx->addr = addr; if (ctx->probe && ctx->probe->pre_handler) ctx->probe->pre_handler(ctx->probe, regs, addr); @@ -227,46 +290,62 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) regs->flags |= TF_MASK; regs->flags &= ~IF_MASK; - /* We hold lock, now we set present bit in PTE and single step. */ + /* Now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); put_cpu_var(kmmio_ctx); + rcu_read_unlock(); return 1; -no_kmmio_locked: - spin_unlock(&kmmio_lock); - ctx->active--; +no_kmmio_ctx: + put_cpu_var(kmmio_ctx); no_kmmio: + rcu_read_unlock(); preempt_enable_no_resched(); - put_cpu_var(kmmio_ctx); - /* page fault not handled by kmmio */ - return 0; + return 0; /* page fault not handled by kmmio */ } /* * Interrupts are disabled on entry as trap1 is an interrupt gate * and they remain disabled thorough out this function. - * And we hold kmmio lock. + * This must always get called as the pair to kmmio_handler(). */ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) { int ret = 0; + struct kmmio_probe *probe; + struct kmmio_fault_page *faultpage; struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) goto out; + rcu_read_lock(); + + faultpage = get_kmmio_fault_page(ctx->addr); + probe = get_kmmio_probe(ctx->addr); + if (faultpage != ctx->fpage || probe != ctx->probe) { + /* + * The trace setup changed after kmmio_handler() and before + * running this respective post handler. User does not want + * the result anymore. + */ + ctx->probe = NULL; + ctx->fpage = NULL; + } + if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); - arm_kmmio_fault_page(ctx->fpage->page, NULL); + if (ctx->fpage) + arm_kmmio_fault_page(ctx->fpage->page, NULL); regs->flags &= ~TF_MASK; regs->flags |= ctx->saved_flags; /* These were acquired in kmmio_handler(). */ ctx->active--; - spin_unlock(&kmmio_lock); + BUG_ON(ctx->active); preempt_enable_no_resched(); /* @@ -277,11 +356,13 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) if (!(regs->flags & TF_MASK)) ret = 1; + rcu_read_unlock(); out: put_cpu_var(kmmio_ctx); return ret; } +/* You must be holding kmmio_lock. */ static int add_kmmio_fault_page(unsigned long page) { struct kmmio_fault_page *f; @@ -289,6 +370,8 @@ static int add_kmmio_fault_page(unsigned long page) page &= PAGE_MASK; f = get_kmmio_fault_page(page); if (f) { + if (!f->count) + arm_kmmio_fault_page(f->page, NULL); f->count++; return 0; } @@ -299,15 +382,16 @@ static int add_kmmio_fault_page(unsigned long page) f->count = 1; f->page = page; - list_add(&f->list, - &kmmio_page_table[hash_long(f->page, KMMIO_PAGE_HASH_BITS)]); + list_add_rcu(&f->list, kmmio_page_list(f->page)); arm_kmmio_fault_page(f->page, NULL); return 0; } -static void release_kmmio_fault_page(unsigned long page) +/* You must be holding kmmio_lock. */ +static void release_kmmio_fault_page(unsigned long page, + struct kmmio_fault_page **release_list) { struct kmmio_fault_page *f; @@ -317,9 +401,11 @@ static void release_kmmio_fault_page(unsigned long page) return; f->count--; + BUG_ON(f->count < 0); if (!f->count) { disarm_kmmio_fault_page(f->page, NULL); - list_del(&f->list); + f->release_next = *release_list; + *release_list = f; } } @@ -334,68 +420,113 @@ int register_kmmio_probe(struct kmmio_probe *p) ret = -EEXIST; goto out; } - list_add(&p->list, &kmmio_probes); - /*printk("adding fault pages...\n");*/ + list_add_rcu(&p->list, &kmmio_probes); while (size < p->len) { if (add_kmmio_fault_page(p->addr + size)) - printk(KERN_ERR "mmio: Unable to set page fault.\n"); + pr_err("kmmio: Unable to set page fault.\n"); size += PAGE_SIZE; } - - if (!handler_registered) { - if (mmiotrace_register_pf(&kmmio_page_fault)) - printk(KERN_ERR "mmiotrace: Cannot register page " - "fault handler.\n"); - else - handler_registered++; - } - out: spin_unlock_irq(&kmmio_lock); /* * XXX: What should I do here? * Here was a call to global_flush_tlb(), but it does not exist - * anymore. + * anymore. It seems it's not needed after all. */ return ret; } +EXPORT_SYMBOL(register_kmmio_probe); +static void rcu_free_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + while (p) { + struct kmmio_fault_page *next = p->release_next; + BUG_ON(p->count); + kfree(p); + p = next; + } + kfree(dr); +} + +static void remove_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + struct kmmio_fault_page **prevp = &dr->release_list; + unsigned long flags; + spin_lock_irqsave(&kmmio_lock, flags); + while (p) { + if (!p->count) + list_del_rcu(&p->list); + else + *prevp = p->release_next; + prevp = &p->release_next; + p = p->release_next; + } + spin_unlock_irqrestore(&kmmio_lock, flags); + /* This is the real RCU destroy call. */ + call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); +} + +/* + * Remove a kmmio probe. You have to synchronize_rcu() before you can be + * sure that the callbacks will not be called anymore. + * + * Unregistering a kmmio fault page has three steps: + * 1. release_kmmio_fault_page() + * Disarm the page, wait a grace period to let all faults finish. + * 2. remove_kmmio_fault_pages() + * Remove the pages from kmmio_page_table. + * 3. rcu_free_kmmio_fault_pages() + * Actally free the kmmio_fault_page structs as with RCU. + */ void unregister_kmmio_probe(struct kmmio_probe *p) { unsigned long size = 0; + struct kmmio_fault_page *release_list = NULL; + struct kmmio_delayed_release *drelease; spin_lock_irq(&kmmio_lock); while (size < p->len) { - release_kmmio_fault_page(p->addr + size); + release_kmmio_fault_page(p->addr + size, &release_list); size += PAGE_SIZE; } - list_del(&p->list); + list_del_rcu(&p->list); kmmio_count--; spin_unlock_irq(&kmmio_lock); -} -/* - * According to 2.6.20, mainly x86_64 arch: - * This is being called from do_page_fault(), via the page fault notifier - * chain. The chain is called for both user space faults and kernel space - * faults (address >= TASK_SIZE64), except not on faults serviced by - * vmalloc_fault(). - * - * We may be in an interrupt or a critical section. Also prefecthing may - * trigger a page fault. We may be in the middle of process switch. - * The page fault hook functionality has put us inside RCU read lock. - * - * Local interrupts are disabled, so preemption cannot happen. - * Do not enable interrupts, do not sleep, and watch out for other CPUs. - */ -static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, - unsigned long address) -{ - if (is_kmmio_active()) - if (kmmio_handler(regs, address) == 1) - return -1; - return 0; + drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); + if (!drelease) { + pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); + return; + } + drelease->release_list = release_list; + + /* + * This is not really RCU here. We have just disarmed a set of + * pages so that they cannot trigger page faults anymore. However, + * we cannot remove the pages from kmmio_page_table, + * because a probe hit might be in flight on another CPU. The + * pages are collected into a list, and they will be removed from + * kmmio_page_table when it is certain that no probe hit related to + * these pages can be in flight. RCU grace period sounds like a + * good choice. + * + * If we removed the pages too early, kmmio page fault handler might + * not find the respective kmmio_fault_page and determine it's not + * a kmmio fault, when it actually is. This would lead to madness. + */ + call_rcu(&drelease->rcu, remove_kmmio_fault_pages); } +EXPORT_SYMBOL(unregister_kmmio_probe); static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args) diff --git a/arch/x86/kernel/mmiotrace/kmmio.h b/arch/x86/kernel/mmiotrace/kmmio.h deleted file mode 100644 index 85b7f68a3b8a..000000000000 --- a/arch/x86/kernel/mmiotrace/kmmio.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _LINUX_KMMIO_H -#define _LINUX_KMMIO_H - -#include -#include -#include -#include -#include -#include -#include - -struct kmmio_probe; -struct kmmio_fault_page; -struct pt_regs; - -typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *, - struct pt_regs *, unsigned long addr); -typedef void (*kmmio_post_handler_t)(struct kmmio_probe *, - unsigned long condition, struct pt_regs *); - -struct kmmio_probe { - struct list_head list; - - /* start location of the probe point */ - unsigned long addr; - - /* length of the probe region */ - unsigned long len; - - /* Called before addr is executed. */ - kmmio_pre_handler_t pre_handler; - - /* Called after addr is executed, unless... */ - kmmio_post_handler_t post_handler; -}; - -struct kmmio_fault_page { - struct list_head list; - - /* location of the fault page */ - unsigned long page; - - int count; -}; - -/* kmmio is active by some kmmio_probes? */ -static inline int is_kmmio_active(void) -{ - extern unsigned int kmmio_count; - return kmmio_count; -} - -int init_kmmio(void); -void cleanup_kmmio(void); -int register_kmmio_probe(struct kmmio_probe *p); -void unregister_kmmio_probe(struct kmmio_probe *p); - -#endif /* _LINUX_KMMIO_H */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index f9c609266d83..e1a508588f03 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -32,7 +32,6 @@ #include #include -#include "kmmio.h" #include "pf_in.h" /* This app's relay channel files will appear in /debug/mmio-trace */ @@ -129,18 +128,17 @@ static void print_pte(unsigned long address) pte_t *pte = lookup_address(address, &level); if (!pte) { - printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", - __FUNCTION__, address); + pr_err(MODULE_NAME ": Error in %s: no pte for page 0x%08lx\n", + __func__, address); return; } if (level == PG_LEVEL_2M) { - printk(KERN_EMERG MODULE_NAME ": 4MB pages are not " - "currently supported: %lx\n", - address); + pr_emerg(MODULE_NAME ": 4MB pages are not currently " + "supported: %lx\n", address); BUG(); } - printk(KERN_DEBUG MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", + pr_info(MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), pte_val(*pte) & _PAGE_PRESENT); } @@ -152,7 +150,7 @@ static void print_pte(unsigned long address) static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - printk(KERN_EMERG MODULE_NAME ": unexpected fault for address: %lx, " + pr_emerg(MODULE_NAME ": unexpected fault for address: %lx, " "last fault for address: %lx\n", addr, my_reason->addr); print_pte(addr); @@ -160,20 +158,17 @@ static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting EIP was at %s\n", my_reason->ip); - printk(KERN_EMERG - "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); - printk(KERN_EMERG - "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", regs->si, regs->di, regs->bp, regs->sp); #else print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting RIP was at %s\n", my_reason->ip); - printk(KERN_EMERG "rax: %016lx rcx: %016lx rdx: %016lx\n", + pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", regs->ax, regs->cx, regs->dx); - printk(KERN_EMERG "rsi: %016lx rdi: %016lx " - "rbp: %016lx rsp: %016lx\n", + pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", regs->si, regs->di, regs->bp, regs->sp); #endif put_cpu_var(pf_reason); @@ -251,10 +246,15 @@ static void post(struct kmmio_probe *p, unsigned long condition, struct trap_reason *my_reason = &get_cpu_var(pf_reason); struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); + /* + * XXX: This might not get called, if the probe is removed while + * trace hit is on flight. + */ + /* this should always return the active_trace count to 0 */ my_reason->active_traces--; if (my_reason->active_traces) { - printk(KERN_EMERG MODULE_NAME ": unexpected post handler"); + pr_emerg(MODULE_NAME ": unexpected post handler"); BUG(); } @@ -283,16 +283,15 @@ static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, atomic_t *drop = &per_cpu(dropped, cpu); int count; if (relay_buf_full(buf)) { - if (atomic_inc_return(drop) == 1) { - printk(KERN_ERR MODULE_NAME ": cpu %d buffer full!\n", - cpu); - } + if (atomic_inc_return(drop) == 1) + pr_err(MODULE_NAME ": cpu %d buffer full!\n", cpu); return 0; - } else if ((count = atomic_read(drop))) { - printk(KERN_ERR MODULE_NAME - ": cpu %d buffer no longer full, " - "missed %d events.\n", - cpu, count); + } + count = atomic_read(drop); + if (count) { + pr_err(MODULE_NAME ": cpu %d buffer no longer full, " + "missed %d events.\n", + cpu, count); atomic_sub(count, drop); } @@ -407,8 +406,8 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, /* Don't trace the low PCI/ISA area, it's always mapped.. */ if (!ISA_trace && (offset < ISA_END_ADDRESS) && (offset + size > ISA_START_ADDRESS)) { - printk(KERN_NOTICE MODULE_NAME ": Ignoring map of low " - "PCI/ISA area (0x%lx-0x%lx)\n", + pr_notice(MODULE_NAME ": Ignoring map of low PCI/ISA area " + "(0x%lx-0x%lx)\n", offset, offset + size); return; } @@ -418,7 +417,7 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, void __iomem *ioremap_cache_trace(unsigned long offset, unsigned long size) { void __iomem *p = ioremap_cache(offset, size); - printk(KERN_DEBUG MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", + pr_debug(MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", offset, size, p); ioremap_trace_core(offset, size, p); return p; @@ -428,7 +427,7 @@ EXPORT_SYMBOL(ioremap_cache_trace); void __iomem *ioremap_nocache_trace(unsigned long offset, unsigned long size) { void __iomem *p = ioremap_nocache(offset, size); - printk(KERN_DEBUG MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", + pr_debug(MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", offset, size, p); ioremap_trace_core(offset, size, p); return p; @@ -455,7 +454,7 @@ void iounmap_trace(volatile void __iomem *addr) }; struct remap_trace *trace; struct remap_trace *tmp; - printk(KERN_DEBUG MODULE_NAME ": Unmapping %p.\n", addr); + pr_debug(MODULE_NAME ": Unmapping %p.\n", addr); record_timestamp(&event.header); spin_lock(&trace_list_lock); @@ -481,7 +480,7 @@ static void clear_trace_list(void) spin_lock(&trace_list_lock); list_for_each_entry_safe(trace, tmp, &trace_list, list) { - printk(KERN_WARNING MODULE_NAME ": purging non-iounmapped " + pr_warning(MODULE_NAME ": purging non-iounmapped " "trace @0x%08lx, size 0x%lx.\n", trace->probe.addr, trace->probe.len); if (!nommiotrace) @@ -500,39 +499,37 @@ static int __init init(void) dir = debugfs_create_dir(APP_DIR, NULL); if (!dir) { - printk(KERN_ERR MODULE_NAME - ": Couldn't create relay app directory.\n"); + pr_err(MODULE_NAME ": Couldn't create relay app directory.\n"); return -ENOMEM; } chan = create_channel(subbuf_size, n_subbufs); if (!chan) { debugfs_remove(dir); - printk(KERN_ERR MODULE_NAME - ": relay app channel creation failed\n"); + pr_err(MODULE_NAME ": relay app channel creation failed\n"); return -ENOMEM; } - init_kmmio(); + reference_kmmio(); proc_marker_file = create_proc_entry(MARKER_FILE, 0, NULL); if (proc_marker_file) proc_marker_file->write_proc = write_marker; - printk(KERN_DEBUG MODULE_NAME ": loaded.\n"); + pr_debug(MODULE_NAME ": loaded.\n"); if (nommiotrace) - printk(KERN_DEBUG MODULE_NAME ": MMIO tracing disabled.\n"); + pr_info(MODULE_NAME ": MMIO tracing disabled.\n"); if (ISA_trace) - printk(KERN_WARNING MODULE_NAME - ": Warning! low ISA range will be traced.\n"); + pr_warning(MODULE_NAME ": Warning! low ISA range will be " + "traced.\n"); return 0; } static void __exit cleanup(void) { - printk(KERN_DEBUG MODULE_NAME ": unload...\n"); + pr_debug(MODULE_NAME ": unload...\n"); clear_trace_list(); - cleanup_kmmio(); + unreference_kmmio(); remove_proc_entry(MARKER_FILE, NULL); destroy_channel(); if (dir) diff --git a/arch/x86/kernel/mmiotrace/pf_in.c b/arch/x86/kernel/mmiotrace/pf_in.c index 67ea520dde62..efa1911e20ca 100644 --- a/arch/x86/kernel/mmiotrace/pf_in.c +++ b/arch/x86/kernel/mmiotrace/pf_in.c @@ -19,7 +19,7 @@ * */ -/* $Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp $ +/* Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp * Copyright by Intel Crop., 2002 * Louis Zhuang (louis.zhuang@intel.com) * diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c index 40e66b0e6480..5ecff578672b 100644 --- a/arch/x86/kernel/mmiotrace/testmmiotrace.c +++ b/arch/x86/kernel/mmiotrace/testmmiotrace.c @@ -41,8 +41,7 @@ static void do_test(void) { void __iomem *p = ioremap_nocache_trace(mmio_address, 0x4000); if (!p) { - printk(KERN_ERR MODULE_NAME ": could not ioremap IO memory, " - "aborting.\n"); + pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); return; } do_write_test(p); @@ -53,14 +52,14 @@ static void do_test(void) static int __init init(void) { if (mmio_address == 0) { - printk(KERN_ERR MODULE_NAME ": you have to use the module " - "argument mmio_address.\n"); - printk(KERN_ERR MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" + pr_err(MODULE_NAME ": you have to use the module argument " + "mmio_address.\n"); + pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); return -ENXIO; } - printk(KERN_WARNING MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " + pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " "in PCI address space, and writing " "rubbish in there.\n", mmio_address); do_test(); @@ -69,7 +68,7 @@ static int __init init(void) static void __exit cleanup(void) { - printk(KERN_DEBUG MODULE_NAME ": unloaded.\n"); + pr_debug(MODULE_NAME ": unloaded.\n"); } module_init(init); diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index e9a086a1a9ff..8c828a68d3b6 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -49,60 +50,14 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) -#ifdef CONFIG_MMIOTRACE_HOOKS -static pf_handler_func mmiotrace_pf_handler; /* protected by RCU */ -static DEFINE_SPINLOCK(mmiotrace_handler_lock); - -int mmiotrace_register_pf(pf_handler_func new_pfh) -{ - int ret = 0; - unsigned long flags; - spin_lock_irqsave(&mmiotrace_handler_lock, flags); - if (mmiotrace_pf_handler) - ret = -EBUSY; - else - mmiotrace_pf_handler = new_pfh; - spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(mmiotrace_register_pf); - -/** - * mmiotrace_unregister_pf: - * The caller must ensure @old_pfh is not in use anymore before freeing it. - * This function does not guarantee it. The handler function pointer is - * protected by RCU, so you can do this by e.g. calling synchronize_rcu(). - */ -int mmiotrace_unregister_pf(pf_handler_func old_pfh) -{ - int ret = 0; - unsigned long flags; - spin_lock_irqsave(&mmiotrace_handler_lock, flags); - if (mmiotrace_pf_handler != old_pfh) - ret = -EPERM; - else - mmiotrace_pf_handler = NULL; - spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(mmiotrace_unregister_pf); -#endif /* CONFIG_MMIOTRACE_HOOKS */ - -/* returns non-zero if do_page_fault() should return */ -static inline int call_mmiotrace(struct pt_regs *regs, - unsigned long error_code, - unsigned long address) +static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr) { #ifdef CONFIG_MMIOTRACE_HOOKS - int ret = 0; - rcu_read_lock(); - if (mmiotrace_pf_handler) - ret = mmiotrace_pf_handler(regs, error_code, address); - rcu_read_unlock(); - return ret; -#else - return 0; + if (unlikely(is_kmmio_active())) + if (kmmio_handler(regs, addr) == 1) + return -1; #endif + return 0; } static inline int notify_page_fault(struct pt_regs *regs) @@ -657,7 +612,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) if (notify_page_fault(regs)) return; - if (call_mmiotrace(regs, error_code, address)) + if (unlikely(kmmio_fault(regs, address))) return; /* -- cgit v1.2.1 From d61fc44853f46fb002228b18aa5f30db21fcd4ac Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86: mmiotrace, preview 2 Kconfig.debug, Makefile and testmmiotrace.c style fixes. Use real mutex instead of mutex. Fix failure path in register probe func. kmmio: RCU read-locked over single stepping. Generate mapping id's. Make mmio-mod.c built-in and rewrite its locking. Add debugfs file to enable/disable mmiotracing. kmmio: use irqsave spinlocks. Lots of cleanups in mmio-mod.c Marker file moved from /proc into debugfs. Call mmiotrace entrypoints directly from ioremap.c. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 20 +- arch/x86/kernel/mmiotrace/Makefile | 2 +- arch/x86/kernel/mmiotrace/kmmio.c | 72 +++--- arch/x86/kernel/mmiotrace/mmio-mod.c | 397 ++++++++++++++++++++---------- arch/x86/kernel/mmiotrace/testmmiotrace.c | 15 +- arch/x86/mm/ioremap.c | 9 +- 6 files changed, 315 insertions(+), 200 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 9491c0ae03a3..aa0d6462b1fc 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -170,22 +170,19 @@ config IOMMU_LEAK config MMIOTRACE_HOOKS bool - default n config MMIOTRACE - tristate "Memory mapped IO tracing" + bool "Memory mapped IO tracing" depends on DEBUG_KERNEL && RELAY && DEBUG_FS select MMIOTRACE_HOOKS - default n + default y help - This will build a kernel module called mmiotrace. - Making this a built-in is heavily discouraged. - - Mmiotrace traces Memory Mapped I/O access and is meant for debugging - and reverse engineering. The kernel module offers wrapped - versions of the ioremap family of functions. The driver to be traced - must be modified to call these wrappers. A user space program is - required to collect the MMIO data. + Mmiotrace traces Memory Mapped I/O access and is meant for + debugging and reverse engineering. It is called from the ioremap + implementation and works via page faults. A user space program is + required to collect the MMIO data from debugfs files. + Tracing is disabled by default and can be enabled from a debugfs + file. See http://nouveau.freedesktop.org/wiki/MmioTrace If you are not helping to develop drivers, say N. @@ -193,7 +190,6 @@ config MMIOTRACE config MMIOTRACE_TEST tristate "Test module for mmiotrace" depends on MMIOTRACE && m - default n help This is a dumb module for testing mmiotrace. It is very dangerous as it will write garbage to IO memory starting at a given address. diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile index cf1e747b463e..dbcd8d50fb8d 100644 --- a/arch/x86/kernel/mmiotrace/Makefile +++ b/arch/x86/kernel/mmiotrace/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o obj-$(CONFIG_MMIOTRACE) += mmiotrace.o -mmiotrace-objs := pf_in.o mmio-mod.o +mmiotrace-y := pf_in.o mmio-mod.o obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 539a9b19588f..efb467933087 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -59,7 +60,7 @@ struct kmmio_context { static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args); -static DECLARE_MUTEX(kmmio_init_mutex); +static DEFINE_MUTEX(kmmio_init_mutex); static DEFINE_SPINLOCK(kmmio_lock); /* These are protected by kmmio_lock */ @@ -90,7 +91,7 @@ static struct notifier_block nb_die = { */ void reference_kmmio(void) { - down(&kmmio_init_mutex); + mutex_lock(&kmmio_init_mutex); spin_lock_irq(&kmmio_lock); if (!kmmio_initialized) { int i; @@ -101,7 +102,7 @@ void reference_kmmio(void) } kmmio_initialized++; spin_unlock_irq(&kmmio_lock); - up(&kmmio_init_mutex); + mutex_unlock(&kmmio_init_mutex); } EXPORT_SYMBOL_GPL(reference_kmmio); @@ -115,7 +116,7 @@ void unreference_kmmio(void) { bool unreg = false; - down(&kmmio_init_mutex); + mutex_lock(&kmmio_init_mutex); spin_lock_irq(&kmmio_lock); if (kmmio_initialized == 1) { @@ -128,7 +129,7 @@ void unreference_kmmio(void) if (unreg) unregister_die_notifier(&nb_die); /* calls sync_rcu() */ - up(&kmmio_init_mutex); + mutex_unlock(&kmmio_init_mutex); } EXPORT_SYMBOL(unreference_kmmio); @@ -244,17 +245,13 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) * Preemption is now disabled to prevent process switch during * single stepping. We can only handle one active kmmio trace * per cpu, so ensure that we finish it before something else - * gets to run. - * - * XXX what if an interrupt occurs between returning from - * do_page_fault() and entering the single-step exception handler? - * And that interrupt triggers a kmmio trap? - * XXX If we tracing an interrupt service routine or whatever, is - * this enough to keep it on the current cpu? + * gets to run. We also hold the RCU read lock over single + * stepping to avoid looking up the probe and kmmio_fault_page + * again. */ preempt_disable(); - rcu_read_lock(); + faultpage = get_kmmio_fault_page(addr); if (!faultpage) { /* @@ -287,14 +284,24 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) if (ctx->probe && ctx->probe->pre_handler) ctx->probe->pre_handler(ctx->probe, regs, addr); + /* + * Enable single-stepping and disable interrupts for the faulting + * context. Local interrupts must not get enabled during stepping. + */ regs->flags |= TF_MASK; regs->flags &= ~IF_MASK; /* Now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); + /* + * If another cpu accesses the same page while we are stepping, + * the access will not be caught. It will simply succeed and the + * only downside is we lose the event. If this becomes a problem, + * the user should drop to single cpu before tracing. + */ + put_cpu_var(kmmio_ctx); - rcu_read_unlock(); return 1; no_kmmio_ctx: @@ -313,32 +320,15 @@ no_kmmio: static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) { int ret = 0; - struct kmmio_probe *probe; - struct kmmio_fault_page *faultpage; struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) goto out; - rcu_read_lock(); - - faultpage = get_kmmio_fault_page(ctx->addr); - probe = get_kmmio_probe(ctx->addr); - if (faultpage != ctx->fpage || probe != ctx->probe) { - /* - * The trace setup changed after kmmio_handler() and before - * running this respective post handler. User does not want - * the result anymore. - */ - ctx->probe = NULL; - ctx->fpage = NULL; - } - if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); - if (ctx->fpage) - arm_kmmio_fault_page(ctx->fpage->page, NULL); + arm_kmmio_fault_page(ctx->fpage->page, NULL); regs->flags &= ~TF_MASK; regs->flags |= ctx->saved_flags; @@ -346,6 +336,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) /* These were acquired in kmmio_handler(). */ ctx->active--; BUG_ON(ctx->active); + rcu_read_unlock(); preempt_enable_no_resched(); /* @@ -355,8 +346,6 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) */ if (!(regs->flags & TF_MASK)) ret = 1; - - rcu_read_unlock(); out: put_cpu_var(kmmio_ctx); return ret; @@ -411,15 +400,16 @@ static void release_kmmio_fault_page(unsigned long page, int register_kmmio_probe(struct kmmio_probe *p) { + unsigned long flags; int ret = 0; unsigned long size = 0; - spin_lock_irq(&kmmio_lock); - kmmio_count++; + spin_lock_irqsave(&kmmio_lock, flags); if (get_kmmio_probe(p->addr)) { ret = -EEXIST; goto out; } + kmmio_count++; list_add_rcu(&p->list, &kmmio_probes); while (size < p->len) { if (add_kmmio_fault_page(p->addr + size)) @@ -427,7 +417,7 @@ int register_kmmio_probe(struct kmmio_probe *p) size += PAGE_SIZE; } out: - spin_unlock_irq(&kmmio_lock); + spin_unlock_irqrestore(&kmmio_lock, flags); /* * XXX: What should I do here? * Here was a call to global_flush_tlb(), but it does not exist @@ -478,7 +468,8 @@ static void remove_kmmio_fault_pages(struct rcu_head *head) /* * Remove a kmmio probe. You have to synchronize_rcu() before you can be - * sure that the callbacks will not be called anymore. + * sure that the callbacks will not be called anymore. Only after that + * you may actually release your struct kmmio_probe. * * Unregistering a kmmio fault page has three steps: * 1. release_kmmio_fault_page() @@ -490,18 +481,19 @@ static void remove_kmmio_fault_pages(struct rcu_head *head) */ void unregister_kmmio_probe(struct kmmio_probe *p) { + unsigned long flags; unsigned long size = 0; struct kmmio_fault_page *release_list = NULL; struct kmmio_delayed_release *drelease; - spin_lock_irq(&kmmio_lock); + spin_lock_irqsave(&kmmio_lock, flags); while (size < p->len) { release_kmmio_fault_page(p->addr + size, &release_list); size += PAGE_SIZE; } list_del_rcu(&p->list); kmmio_count--; - spin_unlock_irq(&kmmio_lock); + spin_unlock_irqrestore(&kmmio_lock, flags); drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); if (!drelease) { diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index e1a508588f03..738644061e4e 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -19,6 +19,8 @@ * * Derived from the read-mod example from relay-examples by Tom Zanussi. */ +#define DEBUG 1 + #include #include #include @@ -34,12 +36,12 @@ #include "pf_in.h" -/* This app's relay channel files will appear in /debug/mmio-trace */ -#define APP_DIR "mmio-trace" -/* the marker injection file in /proc */ -#define MARKER_FILE "mmio-marker" +#define NAME "mmiotrace: " -#define MODULE_NAME "mmiotrace" +/* This app's relay channel files will appear in /debug/mmio-trace */ +static const char APP_DIR[] = "mmio-trace"; +/* the marker injection file in /debug/APP_DIR */ +static const char MARKER_FILE[] = "mmio-marker"; struct trap_reason { unsigned long addr; @@ -48,6 +50,15 @@ struct trap_reason { int active_traces; }; +struct remap_trace { + struct list_head list; + struct kmmio_probe probe; + unsigned long phys; + unsigned long id; +}; + +static const size_t subbuf_size = 256*1024; + /* Accessed per-cpu. */ static DEFINE_PER_CPU(struct trap_reason, pf_reason); static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); @@ -55,33 +66,53 @@ static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); /* Access to this is not per-cpu. */ static DEFINE_PER_CPU(atomic_t, dropped); -static struct file_operations mmio_fops = { - .owner = THIS_MODULE, -}; +static struct dentry *dir; +static struct dentry *enabled_file; +static struct dentry *marker_file; -static const size_t subbuf_size = 256*1024; +static DEFINE_MUTEX(mmiotrace_mutex); +static DEFINE_SPINLOCK(trace_lock); +static atomic_t mmiotrace_enabled; +static LIST_HEAD(trace_list); /* struct remap_trace */ static struct rchan *chan; -static struct dentry *dir; -static struct proc_dir_entry *proc_marker_file; + +/* + * Locking in this file: + * - mmiotrace_mutex enforces enable/disable_mmiotrace() critical sections. + * - mmiotrace_enabled may be modified only when holding mmiotrace_mutex + * and trace_lock. + * - Routines depending on is_enabled() must take trace_lock. + * - trace_list users must hold trace_lock. + * - is_enabled() guarantees that chan is valid. + * - pre/post callbacks assume the effect of is_enabled() being true. + */ /* module parameters */ -static unsigned int n_subbufs = 32*4; -static unsigned long filter_offset; -static int nommiotrace; -static int ISA_trace; -static int trace_pc; +static unsigned int n_subbufs = 32*4; +static unsigned long filter_offset; +static int nommiotrace; +static int ISA_trace; +static int trace_pc; +static int enable_now; module_param(n_subbufs, uint, 0); module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); +module_param(enable_now, bool, 0); MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); +MODULE_PARM_DESC(enable_now, "Start mmiotracing immediately on module load."); + +static bool is_enabled(void) +{ + return atomic_read(&mmiotrace_enabled); +} static void record_timestamp(struct mm_io_header *header) { @@ -93,15 +124,15 @@ static void record_timestamp(struct mm_io_header *header) } /* - * Write callback for the /proc entry: + * Write callback for the debugfs entry: * Read a marker and write it to the mmio trace log */ -static int write_marker(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t write_marker(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) { char *event = NULL; struct mm_io_header *headp; - int len = (count > 65535) ? 65535 : count; + ssize_t len = (count > 65535) ? 65535 : count; event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); if (!event) @@ -117,7 +148,12 @@ static int write_marker(struct file *file, const char __user *buffer, return -EFAULT; } - relay_write(chan, event, sizeof(*headp) + len); + spin_lock_irq(&trace_lock); + if (is_enabled()) + relay_write(chan, event, sizeof(*headp) + len); + else + len = -EINVAL; + spin_unlock_irq(&trace_lock); kfree(event); return len; } @@ -128,19 +164,18 @@ static void print_pte(unsigned long address) pte_t *pte = lookup_address(address, &level); if (!pte) { - pr_err(MODULE_NAME ": Error in %s: no pte for page 0x%08lx\n", + pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", __func__, address); return; } if (level == PG_LEVEL_2M) { - pr_emerg(MODULE_NAME ": 4MB pages are not currently " - "supported: %lx\n", address); + pr_emerg(NAME "4MB pages are not currently supported: " + "0x%08lx\n", address); BUG(); } - pr_info(MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", - address, pte_val(*pte), - pte_val(*pte) & _PAGE_PRESENT); + pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), + pte_val(*pte) & _PAGE_PRESENT); } /* @@ -150,22 +185,18 @@ static void print_pte(unsigned long address) static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - pr_emerg(MODULE_NAME ": unexpected fault for address: %lx, " - "last fault for address: %lx\n", + pr_emerg(NAME "unexpected fault for address: 0x%08lx, " + "last fault for address: 0x%08lx\n", addr, my_reason->addr); print_pte(addr); + print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); #ifdef __i386__ - print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); - print_symbol(KERN_EMERG "last faulting EIP was at %s\n", - my_reason->ip); pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", regs->si, regs->di, regs->bp, regs->sp); #else - print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); - print_symbol(KERN_EMERG "last faulting RIP was at %s\n", - my_reason->ip); pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", regs->ax, regs->cx, regs->dx); pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", @@ -197,6 +228,10 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, my_trace->header.pid = 0; my_trace->header.data_len = sizeof(struct mm_io_rw); my_trace->rw.address = addr; + /* + * struct remap_trace *trace = p->user_data; + * phys = addr - trace->probe.addr + trace->phys; + */ /* * Only record the program counter when requested. @@ -246,15 +281,10 @@ static void post(struct kmmio_probe *p, unsigned long condition, struct trap_reason *my_reason = &get_cpu_var(pf_reason); struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); - /* - * XXX: This might not get called, if the probe is removed while - * trace hit is on flight. - */ - /* this should always return the active_trace count to 0 */ my_reason->active_traces--; if (my_reason->active_traces) { - pr_emerg(MODULE_NAME ": unexpected post handler"); + pr_emerg(NAME "unexpected post handler"); BUG(); } @@ -284,20 +314,23 @@ static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, int count; if (relay_buf_full(buf)) { if (atomic_inc_return(drop) == 1) - pr_err(MODULE_NAME ": cpu %d buffer full!\n", cpu); + pr_err(NAME "cpu %d buffer full!\n", cpu); return 0; } count = atomic_read(drop); if (count) { - pr_err(MODULE_NAME ": cpu %d buffer no longer full, " - "missed %d events.\n", - cpu, count); + pr_err(NAME "cpu %d buffer no longer full, missed %d events.\n", + cpu, count); atomic_sub(count, drop); } return 1; } +static struct file_operations mmio_fops = { + .owner = THIS_MODULE, +}; + /* file_create() callback. Creates relay file in debugfs. */ static struct dentry *create_buf_file_handler(const char *filename, struct dentry *parent, @@ -333,34 +366,10 @@ static struct rchan_callbacks relay_callbacks = { .remove_buf_file = remove_buf_file_handler, }; -/* - * create_channel - creates channel /debug/APP_DIR/cpuXXX - * Returns channel on success, NULL otherwise - */ -static struct rchan *create_channel(unsigned size, unsigned n) -{ - return relay_open("cpu", dir, size, n, &relay_callbacks, NULL); -} - -/* destroy_channel - destroys channel /debug/APP_DIR/cpuXXX */ -static void destroy_channel(void) -{ - if (chan) { - relay_close(chan); - chan = NULL; - } -} - -struct remap_trace { - struct list_head list; - struct kmmio_probe probe; -}; -static LIST_HEAD(trace_list); -static DEFINE_SPINLOCK(trace_list_lock); - -static void do_ioremap_trace_core(unsigned long offset, unsigned long size, +static void ioremap_trace_core(unsigned long offset, unsigned long size, void __iomem *addr) { + static atomic_t next_id; struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); struct mm_io_header_map event = { .header = { @@ -380,61 +389,49 @@ static void do_ioremap_trace_core(unsigned long offset, unsigned long size, }; record_timestamp(&event.header); + if (!trace) { + pr_err(NAME "kmalloc failed in ioremap\n"); + return; + } + *trace = (struct remap_trace) { .probe = { .addr = (unsigned long)addr, .len = size, .pre_handler = pre, .post_handler = post, - } + .user_data = trace + }, + .phys = offset, + .id = atomic_inc_return(&next_id) }; + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + relay_write(chan, &event, sizeof(event)); - spin_lock(&trace_list_lock); list_add_tail(&trace->list, &trace_list); - spin_unlock(&trace_list_lock); if (!nommiotrace) register_kmmio_probe(&trace->probe); + +not_enabled: + spin_unlock_irq(&trace_lock); } -static void ioremap_trace_core(unsigned long offset, unsigned long size, - void __iomem *addr) +void +mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) { - if ((filter_offset) && (offset != filter_offset)) + if (!is_enabled()) /* recheck and proper locking in *_core() */ return; - /* Don't trace the low PCI/ISA area, it's always mapped.. */ - if (!ISA_trace && (offset < ISA_END_ADDRESS) && - (offset + size > ISA_START_ADDRESS)) { - pr_notice(MODULE_NAME ": Ignoring map of low PCI/ISA area " - "(0x%lx-0x%lx)\n", - offset, offset + size); + pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); + if ((filter_offset) && (offset != filter_offset)) return; - } - do_ioremap_trace_core(offset, size, addr); -} - -void __iomem *ioremap_cache_trace(unsigned long offset, unsigned long size) -{ - void __iomem *p = ioremap_cache(offset, size); - pr_debug(MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", - offset, size, p); - ioremap_trace_core(offset, size, p); - return p; + ioremap_trace_core(offset, size, addr); } -EXPORT_SYMBOL(ioremap_cache_trace); -void __iomem *ioremap_nocache_trace(unsigned long offset, unsigned long size) -{ - void __iomem *p = ioremap_nocache(offset, size); - pr_debug(MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", - offset, size, p); - ioremap_trace_core(offset, size, p); - return p; -} -EXPORT_SYMBOL(ioremap_nocache_trace); - -void iounmap_trace(volatile void __iomem *addr) +static void iounmap_trace_core(volatile void __iomem *addr) { struct mm_io_header_map event = { .header = { @@ -454,84 +451,212 @@ void iounmap_trace(volatile void __iomem *addr) }; struct remap_trace *trace; struct remap_trace *tmp; - pr_debug(MODULE_NAME ": Unmapping %p.\n", addr); + struct remap_trace *found_trace = NULL; + + pr_debug(NAME "Unmapping %p.\n", addr); record_timestamp(&event.header); - spin_lock(&trace_list_lock); + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + list_for_each_entry_safe(trace, tmp, &trace_list, list) { if ((unsigned long)addr == trace->probe.addr) { if (!nommiotrace) unregister_kmmio_probe(&trace->probe); list_del(&trace->list); - kfree(trace); + found_trace = trace; break; } } - spin_unlock(&trace_list_lock); relay_write(chan, &event, sizeof(event)); - iounmap(addr); + +not_enabled: + spin_unlock_irq(&trace_lock); + if (found_trace) { + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + kfree(found_trace); + } +} + +void mmiotrace_iounmap(volatile void __iomem *addr) +{ + might_sleep(); + if (is_enabled()) /* recheck and proper locking in *_core() */ + iounmap_trace_core(addr); } -EXPORT_SYMBOL(iounmap_trace); static void clear_trace_list(void) { struct remap_trace *trace; struct remap_trace *tmp; - spin_lock(&trace_list_lock); - list_for_each_entry_safe(trace, tmp, &trace_list, list) { - pr_warning(MODULE_NAME ": purging non-iounmapped " + /* + * No locking required, because the caller ensures we are in a + * critical section via mutex, and is_enabled() is false, + * i.e. nothing can traverse or modify this list. + * Caller also ensures is_enabled() cannot change. + */ + list_for_each_entry(trace, &trace_list, list) { + pr_notice(NAME "purging non-iounmapped " "trace @0x%08lx, size 0x%lx.\n", trace->probe.addr, trace->probe.len); if (!nommiotrace) unregister_kmmio_probe(&trace->probe); + } + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + + list_for_each_entry_safe(trace, tmp, &trace_list, list) { list_del(&trace->list); kfree(trace); + } +} + +static ssize_t read_enabled_file_bool(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char buf[3]; + + if (is_enabled()) + buf[0] = '1'; + else + buf[0] = '0'; + buf[1] = '\n'; + buf[2] = '\0'; + return simple_read_from_buffer(user_buf, count, ppos, buf, 2); +} + +static void enable_mmiotrace(void); +static void disable_mmiotrace(void); + +static ssize_t write_enabled_file_bool(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + char buf[32]; + int buf_size = min(count, (sizeof(buf)-1)); + + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + switch (buf[0]) { + case 'y': + case 'Y': + case '1': + enable_mmiotrace(); + break; + case 'n': + case 'N': + case '0': + disable_mmiotrace(); break; } - spin_unlock(&trace_list_lock); + + return count; +} + +/* this ripped from kernel/kprobes.c */ +static struct file_operations fops_enabled = { + .owner = THIS_MODULE, + .read = read_enabled_file_bool, + .write = write_enabled_file_bool +}; + +static struct file_operations fops_marker = { + .owner = THIS_MODULE, + .write = write_marker +}; + +static void enable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (is_enabled()) + goto out; + + chan = relay_open("cpu", dir, subbuf_size, n_subbufs, + &relay_callbacks, NULL); + if (!chan) { + pr_err(NAME "relay app channel creation failed.\n"); + goto out; + } + + reference_kmmio(); + + marker_file = debugfs_create_file("marker", 0660, dir, NULL, + &fops_marker); + if (!marker_file) + pr_err(NAME "marker file creation failed.\n"); + + if (nommiotrace) + pr_info(NAME "MMIO tracing disabled.\n"); + if (ISA_trace) + pr_warning(NAME "Warning! low ISA range will be traced.\n"); + spin_lock_irq(&trace_lock); + atomic_inc(&mmiotrace_enabled); + spin_unlock_irq(&trace_lock); + pr_info(NAME "enabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); +} + +static void disable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (!is_enabled()) + goto out; + + spin_lock_irq(&trace_lock); + atomic_dec(&mmiotrace_enabled); + BUG_ON(is_enabled()); + spin_unlock_irq(&trace_lock); + + clear_trace_list(); /* guarantees: no more kmmio callbacks */ + unreference_kmmio(); + if (marker_file) { + debugfs_remove(marker_file); + marker_file = NULL; + } + if (chan) { + relay_close(chan); + chan = NULL; + } + + pr_info(NAME "disabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); } static int __init init(void) { + pr_debug(NAME "load...\n"); if (n_subbufs < 2) return -EINVAL; dir = debugfs_create_dir(APP_DIR, NULL); if (!dir) { - pr_err(MODULE_NAME ": Couldn't create relay app directory.\n"); + pr_err(NAME "Couldn't create relay app directory.\n"); return -ENOMEM; } - chan = create_channel(subbuf_size, n_subbufs); - if (!chan) { + enabled_file = debugfs_create_file("enabled", 0600, dir, NULL, + &fops_enabled); + if (!enabled_file) { + pr_err(NAME "Couldn't create enabled file.\n"); debugfs_remove(dir); - pr_err(MODULE_NAME ": relay app channel creation failed\n"); return -ENOMEM; } - reference_kmmio(); - - proc_marker_file = create_proc_entry(MARKER_FILE, 0, NULL); - if (proc_marker_file) - proc_marker_file->write_proc = write_marker; + if (enable_now) + enable_mmiotrace(); - pr_debug(MODULE_NAME ": loaded.\n"); - if (nommiotrace) - pr_info(MODULE_NAME ": MMIO tracing disabled.\n"); - if (ISA_trace) - pr_warning(MODULE_NAME ": Warning! low ISA range will be " - "traced.\n"); return 0; } static void __exit cleanup(void) { - pr_debug(MODULE_NAME ": unload...\n"); - clear_trace_list(); - unreference_kmmio(); - remove_proc_entry(MARKER_FILE, NULL); - destroy_channel(); + pr_debug(NAME "unload...\n"); + if (enabled_file) + debugfs_remove(enabled_file); + disable_mmiotrace(); if (dir) debugfs_remove(dir); } diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c index 5ecff578672b..cfa60b227c8d 100644 --- a/arch/x86/kernel/mmiotrace/testmmiotrace.c +++ b/arch/x86/kernel/mmiotrace/testmmiotrace.c @@ -4,10 +4,6 @@ #include #include -extern void __iomem *ioremap_nocache_trace(unsigned long offset, - unsigned long size); -extern void iounmap_trace(volatile void __iomem *addr); - #define MODULE_NAME "testmmiotrace" static unsigned long mmio_address; @@ -28,25 +24,24 @@ static void do_write_test(void __iomem *p) static void do_read_test(void __iomem *p) { unsigned int i; - volatile unsigned int v; for (i = 0; i < 256; i++) - v = ioread8(p + i); + ioread8(p + i); for (i = 1024; i < (5 * 1024); i += 2) - v = ioread16(p + i); + ioread16(p + i); for (i = (5 * 1024); i < (16 * 1024); i += 4) - v = ioread32(p + i); + ioread32(p + i); } static void do_test(void) { - void __iomem *p = ioremap_nocache_trace(mmio_address, 0x4000); + void __iomem *p = ioremap_nocache(mmio_address, 0x4000); if (!p) { pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); return; } do_write_test(p); do_read_test(p); - iounmap_trace(p); + iounmap(p); } static int __init init(void) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 71bb3159031a..8927c878544d 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -126,6 +127,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, unsigned long new_prot_val; pgprot_t prot; int retval; + void __iomem *ret_addr; /* Don't allow wraparound or zero size */ last_addr = phys_addr + size - 1; @@ -233,7 +235,10 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, return NULL; } - return (void __iomem *) (vaddr + offset); + ret_addr = (void __iomem *) (vaddr + offset); + mmiotrace_ioremap(phys_addr, size, ret_addr); + + return ret_addr; } /** @@ -325,6 +330,8 @@ void iounmap(volatile void __iomem *addr) addr = (volatile void __iomem *) (PAGE_MASK & (unsigned long __force)addr); + mmiotrace_iounmap(addr); + /* Use the vm area unlocked, assuming the caller ensures there isn't another iounmap for the same address in parallel. Reuse of the virtual address is prevented by -- cgit v1.2.1 From f984b51e0779a6dd30feedc41404013ca54e5d05 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: ftrace: add mmiotrace plugin On Sat, 22 Mar 2008 13:07:47 +0100 Ingo Molnar wrote: > > > i'd suggest the following: pull x86.git and sched-devel.git into a > > > single tree [the two will combine without rejects]. Then try to add a > > > kernel/tracing/trace_mmiotrace.c ftrace plugin. The trace_sysprof.c > > > plugin might be a good example. > > > > I did this and now I have mmiotrace enabled/disabled via the tracing > > framework (what do we call this, since ftrace is one of the tracers?). > > cool! could you send the patches for that? (even if they are not fully > functional yet) Patch attached in the end. Nice to see how much code disappeared. I tried to mark all the features I had to break with XXX-comments. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 3 +- arch/x86/kernel/mmiotrace/mmio-mod.c | 208 +++++------------------------------ 2 files changed, 32 insertions(+), 179 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index aa0d6462b1fc..7e4b8494078e 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -173,7 +173,8 @@ config MMIOTRACE_HOOKS config MMIOTRACE bool "Memory mapped IO tracing" - depends on DEBUG_KERNEL && RELAY && DEBUG_FS + depends on DEBUG_KERNEL && RELAY + select TRACING select MMIOTRACE_HOOKS default y help diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 738644061e4e..c7a67d7e482b 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -22,9 +22,8 @@ #define DEBUG 1 #include -#include #include -#include +#include #include #include #include @@ -63,18 +62,18 @@ static const size_t subbuf_size = 256*1024; static DEFINE_PER_CPU(struct trap_reason, pf_reason); static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); +#if 0 /* XXX: no way gather this info anymore */ /* Access to this is not per-cpu. */ static DEFINE_PER_CPU(atomic_t, dropped); +#endif static struct dentry *dir; -static struct dentry *enabled_file; static struct dentry *marker_file; static DEFINE_MUTEX(mmiotrace_mutex); static DEFINE_SPINLOCK(trace_lock); static atomic_t mmiotrace_enabled; static LIST_HEAD(trace_list); /* struct remap_trace */ -static struct rchan *chan; /* * Locking in this file: @@ -93,36 +92,24 @@ static unsigned long filter_offset; static int nommiotrace; static int ISA_trace; static int trace_pc; -static int enable_now; module_param(n_subbufs, uint, 0); module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); -module_param(enable_now, bool, 0); MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); -MODULE_PARM_DESC(enable_now, "Start mmiotracing immediately on module load."); static bool is_enabled(void) { return atomic_read(&mmiotrace_enabled); } -static void record_timestamp(struct mm_io_header *header) -{ - struct timespec now; - - getnstimeofday(&now); - header->sec = now.tv_sec; - header->nsec = now.tv_nsec; -} - /* * Write callback for the debugfs entry: * Read a marker and write it to the mmio trace log @@ -141,7 +128,6 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, headp = (struct mm_io_header *)event; headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); headp->data_len = len; - record_timestamp(headp); if (copy_from_user(event + sizeof(*headp), buffer, len)) { kfree(event); @@ -149,9 +135,11 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, } spin_lock_irq(&trace_lock); +#if 0 /* XXX: convert this to use tracing */ if (is_enabled()) relay_write(chan, event, sizeof(*headp) + len); else +#endif len = -EINVAL; spin_unlock_irq(&trace_lock); kfree(event); @@ -242,7 +230,11 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, else my_trace->rw.pc = 0; - record_timestamp(&my_trace->header); + /* + * XXX: the timestamp recorded will be *after* the tracing has been + * done, not at the time we hit the instruction. SMP implications + * on event ordering? + */ switch (type) { case REG_READ: @@ -295,77 +287,19 @@ static void post(struct kmmio_probe *p, unsigned long condition, default: break; } - relay_write(chan, my_trace, sizeof(*my_trace)); + + /* + * XXX: Several required values are ignored: + * - mapping id + * - program counter + * Also the address should be physical, not virtual. + */ + mmio_trace_record(my_trace->header.type, my_trace->rw.address, + my_trace->rw.value); put_cpu_var(cpu_trace); put_cpu_var(pf_reason); } -/* - * subbuf_start() relay callback. - * - * Defined so that we know when events are dropped due to the buffer-full - * condition. - */ -static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, - void *prev_subbuf, size_t prev_padding) -{ - unsigned int cpu = buf->cpu; - atomic_t *drop = &per_cpu(dropped, cpu); - int count; - if (relay_buf_full(buf)) { - if (atomic_inc_return(drop) == 1) - pr_err(NAME "cpu %d buffer full!\n", cpu); - return 0; - } - count = atomic_read(drop); - if (count) { - pr_err(NAME "cpu %d buffer no longer full, missed %d events.\n", - cpu, count); - atomic_sub(count, drop); - } - - return 1; -} - -static struct file_operations mmio_fops = { - .owner = THIS_MODULE, -}; - -/* file_create() callback. Creates relay file in debugfs. */ -static struct dentry *create_buf_file_handler(const char *filename, - struct dentry *parent, - int mode, - struct rchan_buf *buf, - int *is_global) -{ - struct dentry *buf_file; - - mmio_fops.read = relay_file_operations.read; - mmio_fops.open = relay_file_operations.open; - mmio_fops.poll = relay_file_operations.poll; - mmio_fops.mmap = relay_file_operations.mmap; - mmio_fops.release = relay_file_operations.release; - mmio_fops.splice_read = relay_file_operations.splice_read; - - buf_file = debugfs_create_file(filename, mode, parent, buf, - &mmio_fops); - - return buf_file; -} - -/* file_remove() default callback. Removes relay file in debugfs. */ -static int remove_buf_file_handler(struct dentry *dentry) -{ - debugfs_remove(dentry); - return 0; -} - -static struct rchan_callbacks relay_callbacks = { - .subbuf_start = subbuf_start_handler, - .create_buf_file = create_buf_file_handler, - .remove_buf_file = remove_buf_file_handler, -}; - static void ioremap_trace_core(unsigned long offset, unsigned long size, void __iomem *addr) { @@ -387,7 +321,6 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, .pc = 0 } }; - record_timestamp(&event.header); if (!trace) { pr_err(NAME "kmalloc failed in ioremap\n"); @@ -410,7 +343,10 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, if (!is_enabled()) goto not_enabled; - relay_write(chan, &event, sizeof(event)); + /* + * XXX: Insufficient data recorded! + */ + mmio_trace_record(event.header.type, event.map.addr, event.map.len); list_add_tail(&trace->list, &trace_list); if (!nommiotrace) register_kmmio_probe(&trace->probe); @@ -454,7 +390,6 @@ static void iounmap_trace_core(volatile void __iomem *addr) struct remap_trace *found_trace = NULL; pr_debug(NAME "Unmapping %p.\n", addr); - record_timestamp(&event.header); spin_lock_irq(&trace_lock); if (!is_enabled()) @@ -469,7 +404,8 @@ static void iounmap_trace_core(volatile void __iomem *addr) break; } } - relay_write(chan, &event, sizeof(event)); + mmio_trace_record(event.header.type, event.map.addr, + found_trace ? found_trace->id : -1); not_enabled: spin_unlock_irq(&trace_lock); @@ -512,77 +448,23 @@ static void clear_trace_list(void) } } -static ssize_t read_enabled_file_bool(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buf[3]; - - if (is_enabled()) - buf[0] = '1'; - else - buf[0] = '0'; - buf[1] = '\n'; - buf[2] = '\0'; - return simple_read_from_buffer(user_buf, count, ppos, buf, 2); -} - -static void enable_mmiotrace(void); -static void disable_mmiotrace(void); - -static ssize_t write_enabled_file_bool(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - char buf[32]; - int buf_size = min(count, (sizeof(buf)-1)); - - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - switch (buf[0]) { - case 'y': - case 'Y': - case '1': - enable_mmiotrace(); - break; - case 'n': - case 'N': - case '0': - disable_mmiotrace(); - break; - } - - return count; -} - -/* this ripped from kernel/kprobes.c */ -static struct file_operations fops_enabled = { - .owner = THIS_MODULE, - .read = read_enabled_file_bool, - .write = write_enabled_file_bool -}; - static struct file_operations fops_marker = { .owner = THIS_MODULE, .write = write_marker }; -static void enable_mmiotrace(void) +void enable_mmiotrace(void) { mutex_lock(&mmiotrace_mutex); if (is_enabled()) goto out; - chan = relay_open("cpu", dir, subbuf_size, n_subbufs, - &relay_callbacks, NULL); - if (!chan) { - pr_err(NAME "relay app channel creation failed.\n"); - goto out; - } - reference_kmmio(); +#if 0 /* XXX: tracing does not support text entries */ marker_file = debugfs_create_file("marker", 0660, dir, NULL, &fops_marker); +#endif if (!marker_file) pr_err(NAME "marker file creation failed.\n"); @@ -598,7 +480,7 @@ out: mutex_unlock(&mmiotrace_mutex); } -static void disable_mmiotrace(void) +void disable_mmiotrace(void) { mutex_lock(&mmiotrace_mutex); if (!is_enabled()) @@ -615,17 +497,13 @@ static void disable_mmiotrace(void) debugfs_remove(marker_file); marker_file = NULL; } - if (chan) { - relay_close(chan); - chan = NULL; - } pr_info(NAME "disabled.\n"); out: mutex_unlock(&mmiotrace_mutex); } -static int __init init(void) +int __init init_mmiotrace(void) { pr_debug(NAME "load...\n"); if (n_subbufs < 2) @@ -636,31 +514,5 @@ static int __init init(void) pr_err(NAME "Couldn't create relay app directory.\n"); return -ENOMEM; } - - enabled_file = debugfs_create_file("enabled", 0600, dir, NULL, - &fops_enabled); - if (!enabled_file) { - pr_err(NAME "Couldn't create enabled file.\n"); - debugfs_remove(dir); - return -ENOMEM; - } - - if (enable_now) - enable_mmiotrace(); - return 0; } - -static void __exit cleanup(void) -{ - pr_debug(NAME "unload...\n"); - if (enabled_file) - debugfs_remove(enabled_file); - disable_mmiotrace(); - if (dir) - debugfs_remove(dir); -} - -module_init(init); -module_exit(cleanup); -MODULE_LICENSE("GPL"); -- cgit v1.2.1 From bd8ac686c73c7e925fcfe0b02dc4e7b947127864 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: ftrace: mmiotrace, updates here is a patch that makes mmiotrace work almost well within the tracing framework. The patch applies on top of my previous patch. I have my own output formatting in place now. Summary of changes: - fix the NULL dereference that was due to not calling tracing_reset() - add print_line() callback into struct tracer - implement print_line() for mmiotrace, producing up-to-spec text - add my output header, but that is not really called in the right place - rewrote the main structs in mmiotrace - added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP - made some functions in trace.c non-static - check current==NULL in tracing_generic_entry_update() - fix(?) comparison in trace_seq_printf() Things seem to work fine except a few issues. Markers (text lines injected into mmiotrace log) are missing, I did not feel hacking them in before we have variable length entries. My output header is printed only for 'trace' file, but not 'trace_pipe'. For some reason, despite my quick fix, iter->trace is NULL in print_trace_line() when called from 'trace_pipe' file, which means I don't get proper output formatting. I only tried by loading nouveau.ko, which just detects the card, and that is traced fine. I didn't try further. Map, two reads and unmap. Works perfectly. I am missing the information about overflows, I'd prefer to have a counter for lost events. I didn't try, but I guess currently there is no way of knowning when it overflows? So, not too far from being fully operational, it seems :-) And looking at the diffstat, there also is some 700-900 lines of user space code that just became obsolete. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 2 +- arch/x86/kernel/mmiotrace/mmio-mod.c | 140 ++++++++++------------------------- 2 files changed, 42 insertions(+), 100 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 7e4b8494078e..1d6de0d67f99 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -173,7 +173,7 @@ config MMIOTRACE_HOOKS config MMIOTRACE bool "Memory mapped IO tracing" - depends on DEBUG_KERNEL && RELAY + depends on DEBUG_KERNEL select TRACING select MMIOTRACE_HOOKS default y diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index c7a67d7e482b..62abc281a512 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -37,11 +37,6 @@ #define NAME "mmiotrace: " -/* This app's relay channel files will appear in /debug/mmio-trace */ -static const char APP_DIR[] = "mmio-trace"; -/* the marker injection file in /debug/APP_DIR */ -static const char MARKER_FILE[] = "mmio-marker"; - struct trap_reason { unsigned long addr; unsigned long ip; @@ -56,18 +51,15 @@ struct remap_trace { unsigned long id; }; -static const size_t subbuf_size = 256*1024; - /* Accessed per-cpu. */ static DEFINE_PER_CPU(struct trap_reason, pf_reason); -static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); +static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace); #if 0 /* XXX: no way gather this info anymore */ /* Access to this is not per-cpu. */ static DEFINE_PER_CPU(atomic_t, dropped); #endif -static struct dentry *dir; static struct dentry *marker_file; static DEFINE_MUTEX(mmiotrace_mutex); @@ -82,24 +74,21 @@ static LIST_HEAD(trace_list); /* struct remap_trace */ * and trace_lock. * - Routines depending on is_enabled() must take trace_lock. * - trace_list users must hold trace_lock. - * - is_enabled() guarantees that chan is valid. + * - is_enabled() guarantees that mmio_trace_record is allowed. * - pre/post callbacks assume the effect of is_enabled() being true. */ /* module parameters */ -static unsigned int n_subbufs = 32*4; static unsigned long filter_offset; static int nommiotrace; static int ISA_trace; static int trace_pc; -module_param(n_subbufs, uint, 0); module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); -MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); @@ -110,6 +99,7 @@ static bool is_enabled(void) return atomic_read(&mmiotrace_enabled); } +#if 0 /* XXX: needs rewrite */ /* * Write callback for the debugfs entry: * Read a marker and write it to the mmio trace log @@ -145,6 +135,7 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, kfree(event); return len; } +#endif static void print_pte(unsigned long address) { @@ -198,9 +189,10 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, unsigned long addr) { struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); const unsigned long instptr = instruction_pointer(regs); const enum reason_type type = get_ins_type(instptr); + struct remap_trace *trace = p->user_data; /* it doesn't make sense to have more than one active trace per cpu */ if (my_reason->active_traces) @@ -212,23 +204,17 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, my_reason->addr = addr; my_reason->ip = instptr; - my_trace->header.type = MMIO_MAGIC; - my_trace->header.pid = 0; - my_trace->header.data_len = sizeof(struct mm_io_rw); - my_trace->rw.address = addr; - /* - * struct remap_trace *trace = p->user_data; - * phys = addr - trace->probe.addr + trace->phys; - */ + my_trace->phys = addr - trace->probe.addr + trace->phys; + my_trace->map_id = trace->id; /* * Only record the program counter when requested. * It may taint clean-room reverse engineering. */ if (trace_pc) - my_trace->rw.pc = instptr; + my_trace->pc = instptr; else - my_trace->rw.pc = 0; + my_trace->pc = 0; /* * XXX: the timestamp recorded will be *after* the tracing has been @@ -238,28 +224,25 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, switch (type) { case REG_READ: - my_trace->header.type |= - (MMIO_READ << MMIO_OPCODE_SHIFT) | - (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + my_trace->opcode = MMIO_READ; + my_trace->width = get_ins_mem_width(instptr); break; case REG_WRITE: - my_trace->header.type |= - (MMIO_WRITE << MMIO_OPCODE_SHIFT) | - (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - my_trace->rw.value = get_ins_reg_val(instptr, regs); + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_reg_val(instptr, regs); break; case IMM_WRITE: - my_trace->header.type |= - (MMIO_WRITE << MMIO_OPCODE_SHIFT) | - (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - my_trace->rw.value = get_ins_imm_val(instptr); + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_imm_val(instptr); break; default: { unsigned char *ip = (unsigned char *)instptr; - my_trace->header.type |= - (MMIO_UNKNOWN_OP << MMIO_OPCODE_SHIFT); - my_trace->rw.value = (*ip) << 16 | *(ip + 1) << 8 | + my_trace->opcode = MMIO_UNKNOWN_OP; + my_trace->width = 0; + my_trace->value = (*ip) << 16 | *(ip + 1) << 8 | *(ip + 2); } } @@ -271,7 +254,7 @@ static void post(struct kmmio_probe *p, unsigned long condition, struct pt_regs *regs) { struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); /* this should always return the active_trace count to 0 */ my_reason->active_traces--; @@ -282,20 +265,13 @@ static void post(struct kmmio_probe *p, unsigned long condition, switch (my_reason->type) { case REG_READ: - my_trace->rw.value = get_ins_reg_val(my_reason->ip, regs); + my_trace->value = get_ins_reg_val(my_reason->ip, regs); break; default: break; } - /* - * XXX: Several required values are ignored: - * - mapping id - * - program counter - * Also the address should be physical, not virtual. - */ - mmio_trace_record(my_trace->header.type, my_trace->rw.address, - my_trace->rw.value); + mmio_trace_rw(my_trace); put_cpu_var(cpu_trace); put_cpu_var(pf_reason); } @@ -305,21 +281,11 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, { static atomic_t next_id; struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); - struct mm_io_header_map event = { - .header = { - .type = MMIO_MAGIC | - (MMIO_PROBE << MMIO_OPCODE_SHIFT), - .sec = 0, - .nsec = 0, - .pid = 0, - .data_len = sizeof(struct mm_io_map) - }, - .map = { - .phys = offset, - .addr = (unsigned long)addr, - .len = size, - .pc = 0 - } + struct mmiotrace_map map = { + .phys = offset, + .virt = (unsigned long)addr, + .len = size, + .opcode = MMIO_PROBE }; if (!trace) { @@ -338,15 +304,13 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, .phys = offset, .id = atomic_inc_return(&next_id) }; + map.map_id = trace->id; spin_lock_irq(&trace_lock); if (!is_enabled()) goto not_enabled; - /* - * XXX: Insufficient data recorded! - */ - mmio_trace_record(event.header.type, event.map.addr, event.map.len); + mmio_trace_mapping(&map); list_add_tail(&trace->list, &trace_list); if (!nommiotrace) register_kmmio_probe(&trace->probe); @@ -369,21 +333,11 @@ mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) static void iounmap_trace_core(volatile void __iomem *addr) { - struct mm_io_header_map event = { - .header = { - .type = MMIO_MAGIC | - (MMIO_UNPROBE << MMIO_OPCODE_SHIFT), - .sec = 0, - .nsec = 0, - .pid = 0, - .data_len = sizeof(struct mm_io_map) - }, - .map = { - .phys = 0, - .addr = (unsigned long)addr, - .len = 0, - .pc = 0 - } + struct mmiotrace_map map = { + .phys = 0, + .virt = (unsigned long)addr, + .len = 0, + .opcode = MMIO_UNPROBE }; struct remap_trace *trace; struct remap_trace *tmp; @@ -404,8 +358,8 @@ static void iounmap_trace_core(volatile void __iomem *addr) break; } } - mmio_trace_record(event.header.type, event.map.addr, - found_trace ? found_trace->id : -1); + map.map_id = (found_trace) ? found_trace->id : -1; + mmio_trace_mapping(&map); not_enabled: spin_unlock_irq(&trace_lock); @@ -448,10 +402,12 @@ static void clear_trace_list(void) } } +#if 0 /* XXX: out of order */ static struct file_operations fops_marker = { .owner = THIS_MODULE, .write = write_marker }; +#endif void enable_mmiotrace(void) { @@ -464,9 +420,9 @@ void enable_mmiotrace(void) #if 0 /* XXX: tracing does not support text entries */ marker_file = debugfs_create_file("marker", 0660, dir, NULL, &fops_marker); -#endif if (!marker_file) pr_err(NAME "marker file creation failed.\n"); +#endif if (nommiotrace) pr_info(NAME "MMIO tracing disabled.\n"); @@ -502,17 +458,3 @@ void disable_mmiotrace(void) out: mutex_unlock(&mmiotrace_mutex); } - -int __init init_mmiotrace(void) -{ - pr_debug(NAME "load...\n"); - if (n_subbufs < 2) - return -EINVAL; - - dir = debugfs_create_dir(APP_DIR, NULL); - if (!dir) { - pr_err(NAME "Couldn't create relay app directory.\n"); - return -ENOMEM; - } - return 0; -} -- cgit v1.2.1 From 138295373ccf7625fcb0218dfea114837983bc39 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:58 +0200 Subject: ftrace: mmiotrace update, #2 another weekend, another patch. This should apply on top of my previous patch from March 23rd. Summary of changes: - Print PCI device list in output header - work around recursive probe hits on SMP - refactor dis/arm_kmmio_fault_page() and add check for page levels - remove un/reference_kmmio(), the die notifier hook is registered permanently into the list - explicitly check for single stepping in die notifier callback I have tested this version on my UP Athlon64 desktop with Nouveau, and SMP Core 2 Duo laptop with the proprietary nvidia driver. Both systems are 64-bit. One previously unknown bug crept into daylight: the ftrace framework's output routines print the first entry last after buffer has wrapped around. The most important regressions compared to non-ftrace mmiotrace at this time are: - failure of trace_pipe file - illegal lines in output file - unaware of losing data due to buffer full Personally I'd like to see these three solved before submitting to mainline. Other issues may come up once we know when we lose events. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 186 ++++++++++++++--------------------- arch/x86/kernel/mmiotrace/mmio-mod.c | 3 - 2 files changed, 76 insertions(+), 113 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index efb467933087..cd0d95fe4fe6 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -5,15 +5,12 @@ * 2008 Pekka Paalanen */ -#include #include #include #include #include #include -#include #include -#include #include #include #include @@ -22,10 +19,9 @@ #include #include #include -#include #include -#include - +#include +#include #include #define KMMIO_PAGE_HASH_BITS 4 @@ -57,14 +53,9 @@ struct kmmio_context { int active; }; -static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, - void *args); - -static DEFINE_MUTEX(kmmio_init_mutex); static DEFINE_SPINLOCK(kmmio_lock); -/* These are protected by kmmio_lock */ -static int kmmio_initialized; +/* Protected by kmmio_lock */ unsigned int kmmio_count; /* Read-protected by RCU, write-protected by kmmio_lock. */ @@ -79,60 +70,6 @@ static struct list_head *kmmio_page_list(unsigned long page) /* Accessed per-cpu */ static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); -/* protected by kmmio_init_mutex */ -static struct notifier_block nb_die = { - .notifier_call = kmmio_die_notifier -}; - -/** - * Makes sure kmmio is initialized and usable. - * This must be called before any other kmmio function defined here. - * May sleep. - */ -void reference_kmmio(void) -{ - mutex_lock(&kmmio_init_mutex); - spin_lock_irq(&kmmio_lock); - if (!kmmio_initialized) { - int i; - for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) - INIT_LIST_HEAD(&kmmio_page_table[i]); - if (register_die_notifier(&nb_die)) - BUG(); - } - kmmio_initialized++; - spin_unlock_irq(&kmmio_lock); - mutex_unlock(&kmmio_init_mutex); -} -EXPORT_SYMBOL_GPL(reference_kmmio); - -/** - * Clean up kmmio after use. This must be called for every call to - * reference_kmmio(). All probes registered after the corresponding - * reference_kmmio() must have been unregistered when calling this. - * May sleep. - */ -void unreference_kmmio(void) -{ - bool unreg = false; - - mutex_lock(&kmmio_init_mutex); - spin_lock_irq(&kmmio_lock); - - if (kmmio_initialized == 1) { - BUG_ON(is_kmmio_active()); - unreg = true; - } - kmmio_initialized--; - BUG_ON(kmmio_initialized < 0); - spin_unlock_irq(&kmmio_lock); - - if (unreg) - unregister_die_notifier(&nb_die); /* calls sync_rcu() */ - mutex_unlock(&kmmio_init_mutex); -} -EXPORT_SYMBOL(unreference_kmmio); - /* * this is basically a dynamic stabbing problem: * Could use the existing prio tree code or @@ -167,58 +104,56 @@ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) return NULL; } -/** Mark the given page as not present. Access to it will trigger a fault. */ -static void arm_kmmio_fault_page(unsigned long page, int *page_level) +static void set_page_present(unsigned long addr, bool present, int *pglevel) { - unsigned long address = page & PAGE_MASK; + pteval_t pteval; + pmdval_t pmdval; int level; - pte_t *pte = lookup_address(address, &level); + pmd_t *pmd; + pte_t *pte = lookup_address(addr, &level); if (!pte) { - pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", - __func__, page); + pr_err("kmmio: no pte for page 0x%08lx\n", addr); return; } - if (level == PG_LEVEL_2M) { - pmd_t *pmd = (pmd_t *)pte; - set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_PRESENT)); - } else { - /* PG_LEVEL_4K */ - set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT)); + if (pglevel) + *pglevel = level; + + switch (level) { + case PG_LEVEL_2M: + pmd = (pmd_t *)pte; + pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT; + if (present) + pmdval |= _PAGE_PRESENT; + set_pmd(pmd, __pmd(pmdval)); + break; + + case PG_LEVEL_4K: + pteval = pte_val(*pte) & ~_PAGE_PRESENT; + if (present) + pteval |= _PAGE_PRESENT; + set_pte_atomic(pte, __pte(pteval)); + break; + + default: + pr_err("kmmio: unexpected page level 0x%x.\n", level); + return; } - if (page_level) - *page_level = level; + __flush_tlb_one(addr); +} - __flush_tlb_one(page); +/** Mark the given page as not present. Access to it will trigger a fault. */ +static void arm_kmmio_fault_page(unsigned long page, int *page_level) +{ + set_page_present(page & PAGE_MASK, false, page_level); } /** Mark the given page as present. */ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) { - unsigned long address = page & PAGE_MASK; - int level; - pte_t *pte = lookup_address(address, &level); - - if (!pte) { - pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", - __func__, page); - return; - } - - if (level == PG_LEVEL_2M) { - pmd_t *pmd = (pmd_t *)pte; - set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_PRESENT)); - } else { - /* PG_LEVEL_4K */ - set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT)); - } - - if (page_level) - *page_level = level; - - __flush_tlb_one(page); + set_page_present(page & PAGE_MASK, true, page_level); } /* @@ -240,6 +175,7 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) { struct kmmio_context *ctx; struct kmmio_fault_page *faultpage; + int ret = 0; /* default to fault not handled */ /* * Preemption is now disabled to prevent process switch during @@ -257,21 +193,35 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) /* * Either this page fault is not caused by kmmio, or * another CPU just pulled the kmmio probe from under - * our feet. In the latter case all hell breaks loose. + * our feet. The latter case should not be possible. */ goto no_kmmio; } ctx = &get_cpu_var(kmmio_ctx); if (ctx->active) { + disarm_kmmio_fault_page(faultpage->page, NULL); + if (addr == ctx->addr) { + /* + * On SMP we sometimes get recursive probe hits on the + * same address. Context is already saved, fall out. + */ + pr_debug("kmmio: duplicate probe hit on CPU %d, for " + "address 0x%08lx.\n", + smp_processor_id(), addr); + ret = 1; + goto no_kmmio_ctx; + } /* * Prevent overwriting already in-flight context. - * If this page fault really was due to kmmio trap, - * all hell breaks loose. + * This should not happen, let's hope disarming at least + * prevents a panic. */ pr_emerg("kmmio: recursive probe hit on CPU %d, " "for address 0x%08lx. Ignoring.\n", smp_processor_id(), addr); + pr_emerg("kmmio: previous hit was at 0x%08lx.\n", + ctx->addr); goto no_kmmio_ctx; } ctx->active++; @@ -302,14 +252,14 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) */ put_cpu_var(kmmio_ctx); - return 1; + return 1; /* fault handled */ no_kmmio_ctx: put_cpu_var(kmmio_ctx); no_kmmio: rcu_read_unlock(); preempt_enable_no_resched(); - return 0; /* page fault not handled by kmmio */ + return ret; } /* @@ -322,8 +272,11 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) int ret = 0; struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); - if (!ctx->active) + if (!ctx->active) { + pr_debug("kmmio: spurious debug trap on CPU %d.\n", + smp_processor_id()); goto out; + } if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); @@ -525,9 +478,22 @@ static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, { struct die_args *arg = args; - if (val == DIE_DEBUG) + if (val == DIE_DEBUG && (arg->err & DR_STEP)) if (post_kmmio_handler(arg->err, arg->regs) == 1) return NOTIFY_STOP; return NOTIFY_DONE; } + +static struct notifier_block nb_die = { + .notifier_call = kmmio_die_notifier +}; + +static int __init init_kmmio(void) +{ + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + return register_die_notifier(&nb_die); +} +fs_initcall(init_kmmio); /* should be before device_initcall() */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 62abc281a512..8256546d49bf 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -415,8 +415,6 @@ void enable_mmiotrace(void) if (is_enabled()) goto out; - reference_kmmio(); - #if 0 /* XXX: tracing does not support text entries */ marker_file = debugfs_create_file("marker", 0660, dir, NULL, &fops_marker); @@ -448,7 +446,6 @@ void disable_mmiotrace(void) spin_unlock_irq(&trace_lock); clear_trace_list(); /* guarantees: no more kmmio callbacks */ - unreference_kmmio(); if (marker_file) { debugfs_remove(marker_file); marker_file = NULL; -- cgit v1.2.1 From 49023168261a7f9a2fd4a1ca1adbfea922556015 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:58 +0200 Subject: mmiotrace: cleanup Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index cd0d95fe4fe6..3ad27b8504a5 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -228,7 +228,7 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) ctx->fpage = faultpage; ctx->probe = get_kmmio_probe(addr); - ctx->saved_flags = (regs->flags & (TF_MASK|IF_MASK)); + ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF)); ctx->addr = addr; if (ctx->probe && ctx->probe->pre_handler) @@ -238,8 +238,8 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) * Enable single-stepping and disable interrupts for the faulting * context. Local interrupts must not get enabled during stepping. */ - regs->flags |= TF_MASK; - regs->flags &= ~IF_MASK; + regs->flags |= X86_EFLAGS_TF; + regs->flags &= ~X86_EFLAGS_IF; /* Now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); @@ -283,7 +283,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) arm_kmmio_fault_page(ctx->fpage->page, NULL); - regs->flags &= ~TF_MASK; + regs->flags &= ~X86_EFLAGS_TF; regs->flags |= ctx->saved_flags; /* These were acquired in kmmio_handler(). */ @@ -297,7 +297,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) * will have TF set, in which case, continue the remaining processing * of do_debug, as if this is not a probe hit. */ - if (!(regs->flags & TF_MASK)) + if (!(regs->flags & X86_EFLAGS_TF)) ret = 1; out: put_cpu_var(kmmio_ctx); -- cgit v1.2.1 From ff3a3e9ba5e4273a8bc10570adab4a390fb90757 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:59 +0200 Subject: x86 mmiotrace: move files into arch/x86/mm/. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 - arch/x86/kernel/mmiotrace/Makefile | 4 - arch/x86/kernel/mmiotrace/kmmio.c | 499 ------------------------------ arch/x86/kernel/mmiotrace/mmio-mod.c | 457 --------------------------- arch/x86/kernel/mmiotrace/pf_in.c | 489 ----------------------------- arch/x86/kernel/mmiotrace/pf_in.h | 39 --- arch/x86/kernel/mmiotrace/testmmiotrace.c | 71 ----- arch/x86/mm/Makefile | 5 + arch/x86/mm/kmmio.c | 499 ++++++++++++++++++++++++++++++ arch/x86/mm/mmio-mod.c | 457 +++++++++++++++++++++++++++ arch/x86/mm/pf_in.c | 489 +++++++++++++++++++++++++++++ arch/x86/mm/pf_in.h | 39 +++ arch/x86/mm/testmmiotrace.c | 71 +++++ 13 files changed, 1560 insertions(+), 1561 deletions(-) delete mode 100644 arch/x86/kernel/mmiotrace/Makefile delete mode 100644 arch/x86/kernel/mmiotrace/kmmio.c delete mode 100644 arch/x86/kernel/mmiotrace/mmio-mod.c delete mode 100644 arch/x86/kernel/mmiotrace/pf_in.c delete mode 100644 arch/x86/kernel/mmiotrace/pf_in.h delete mode 100644 arch/x86/kernel/mmiotrace/testmmiotrace.c create mode 100644 arch/x86/mm/kmmio.c create mode 100644 arch/x86/mm/mmio-mod.c create mode 100644 arch/x86/mm/pf_in.c create mode 100644 arch/x86/mm/pf_in.h create mode 100644 arch/x86/mm/testmmiotrace.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index a51ac153685e..739d49acd2f1 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -79,8 +79,6 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_MMIOTRACE) += mmiotrace/ - obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile deleted file mode 100644 index dbcd8d50fb8d..000000000000 --- a/arch/x86/kernel/mmiotrace/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o -obj-$(CONFIG_MMIOTRACE) += mmiotrace.o -mmiotrace-y := pf_in.o mmio-mod.o -obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c deleted file mode 100644 index 3ad27b8504a5..000000000000 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ /dev/null @@ -1,499 +0,0 @@ -/* Support for MMIO probes. - * Benfit many code from kprobes - * (C) 2002 Louis Zhuang . - * 2007 Alexander Eichner - * 2008 Pekka Paalanen - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define KMMIO_PAGE_HASH_BITS 4 -#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) - -struct kmmio_fault_page { - struct list_head list; - struct kmmio_fault_page *release_next; - unsigned long page; /* location of the fault page */ - - /* - * Number of times this page has been registered as a part - * of a probe. If zero, page is disarmed and this may be freed. - * Used only by writers (RCU). - */ - int count; -}; - -struct kmmio_delayed_release { - struct rcu_head rcu; - struct kmmio_fault_page *release_list; -}; - -struct kmmio_context { - struct kmmio_fault_page *fpage; - struct kmmio_probe *probe; - unsigned long saved_flags; - unsigned long addr; - int active; -}; - -static DEFINE_SPINLOCK(kmmio_lock); - -/* Protected by kmmio_lock */ -unsigned int kmmio_count; - -/* Read-protected by RCU, write-protected by kmmio_lock. */ -static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; -static LIST_HEAD(kmmio_probes); - -static struct list_head *kmmio_page_list(unsigned long page) -{ - return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; -} - -/* Accessed per-cpu */ -static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); - -/* - * this is basically a dynamic stabbing problem: - * Could use the existing prio tree code or - * Possible better implementations: - * The Interval Skip List: A Data Structure for Finding All Intervals That - * Overlap a Point (might be simple) - * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup - */ -/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */ -static struct kmmio_probe *get_kmmio_probe(unsigned long addr) -{ - struct kmmio_probe *p; - list_for_each_entry_rcu(p, &kmmio_probes, list) { - if (addr >= p->addr && addr <= (p->addr + p->len)) - return p; - } - return NULL; -} - -/* You must be holding RCU read lock. */ -static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) -{ - struct list_head *head; - struct kmmio_fault_page *p; - - page &= PAGE_MASK; - head = kmmio_page_list(page); - list_for_each_entry_rcu(p, head, list) { - if (p->page == page) - return p; - } - return NULL; -} - -static void set_page_present(unsigned long addr, bool present, int *pglevel) -{ - pteval_t pteval; - pmdval_t pmdval; - int level; - pmd_t *pmd; - pte_t *pte = lookup_address(addr, &level); - - if (!pte) { - pr_err("kmmio: no pte for page 0x%08lx\n", addr); - return; - } - - if (pglevel) - *pglevel = level; - - switch (level) { - case PG_LEVEL_2M: - pmd = (pmd_t *)pte; - pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT; - if (present) - pmdval |= _PAGE_PRESENT; - set_pmd(pmd, __pmd(pmdval)); - break; - - case PG_LEVEL_4K: - pteval = pte_val(*pte) & ~_PAGE_PRESENT; - if (present) - pteval |= _PAGE_PRESENT; - set_pte_atomic(pte, __pte(pteval)); - break; - - default: - pr_err("kmmio: unexpected page level 0x%x.\n", level); - return; - } - - __flush_tlb_one(addr); -} - -/** Mark the given page as not present. Access to it will trigger a fault. */ -static void arm_kmmio_fault_page(unsigned long page, int *page_level) -{ - set_page_present(page & PAGE_MASK, false, page_level); -} - -/** Mark the given page as present. */ -static void disarm_kmmio_fault_page(unsigned long page, int *page_level) -{ - set_page_present(page & PAGE_MASK, true, page_level); -} - -/* - * This is being called from do_page_fault(). - * - * We may be in an interrupt or a critical section. Also prefecthing may - * trigger a page fault. We may be in the middle of process switch. - * We cannot take any locks, because we could be executing especially - * within a kmmio critical section. - * - * Local interrupts are disabled, so preemption cannot happen. - * Do not enable interrupts, do not sleep, and watch out for other CPUs. - */ -/* - * Interrupts are disabled on entry as trap3 is an interrupt gate - * and they remain disabled thorough out this function. - */ -int kmmio_handler(struct pt_regs *regs, unsigned long addr) -{ - struct kmmio_context *ctx; - struct kmmio_fault_page *faultpage; - int ret = 0; /* default to fault not handled */ - - /* - * Preemption is now disabled to prevent process switch during - * single stepping. We can only handle one active kmmio trace - * per cpu, so ensure that we finish it before something else - * gets to run. We also hold the RCU read lock over single - * stepping to avoid looking up the probe and kmmio_fault_page - * again. - */ - preempt_disable(); - rcu_read_lock(); - - faultpage = get_kmmio_fault_page(addr); - if (!faultpage) { - /* - * Either this page fault is not caused by kmmio, or - * another CPU just pulled the kmmio probe from under - * our feet. The latter case should not be possible. - */ - goto no_kmmio; - } - - ctx = &get_cpu_var(kmmio_ctx); - if (ctx->active) { - disarm_kmmio_fault_page(faultpage->page, NULL); - if (addr == ctx->addr) { - /* - * On SMP we sometimes get recursive probe hits on the - * same address. Context is already saved, fall out. - */ - pr_debug("kmmio: duplicate probe hit on CPU %d, for " - "address 0x%08lx.\n", - smp_processor_id(), addr); - ret = 1; - goto no_kmmio_ctx; - } - /* - * Prevent overwriting already in-flight context. - * This should not happen, let's hope disarming at least - * prevents a panic. - */ - pr_emerg("kmmio: recursive probe hit on CPU %d, " - "for address 0x%08lx. Ignoring.\n", - smp_processor_id(), addr); - pr_emerg("kmmio: previous hit was at 0x%08lx.\n", - ctx->addr); - goto no_kmmio_ctx; - } - ctx->active++; - - ctx->fpage = faultpage; - ctx->probe = get_kmmio_probe(addr); - ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF)); - ctx->addr = addr; - - if (ctx->probe && ctx->probe->pre_handler) - ctx->probe->pre_handler(ctx->probe, regs, addr); - - /* - * Enable single-stepping and disable interrupts for the faulting - * context. Local interrupts must not get enabled during stepping. - */ - regs->flags |= X86_EFLAGS_TF; - regs->flags &= ~X86_EFLAGS_IF; - - /* Now we set present bit in PTE and single step. */ - disarm_kmmio_fault_page(ctx->fpage->page, NULL); - - /* - * If another cpu accesses the same page while we are stepping, - * the access will not be caught. It will simply succeed and the - * only downside is we lose the event. If this becomes a problem, - * the user should drop to single cpu before tracing. - */ - - put_cpu_var(kmmio_ctx); - return 1; /* fault handled */ - -no_kmmio_ctx: - put_cpu_var(kmmio_ctx); -no_kmmio: - rcu_read_unlock(); - preempt_enable_no_resched(); - return ret; -} - -/* - * Interrupts are disabled on entry as trap1 is an interrupt gate - * and they remain disabled thorough out this function. - * This must always get called as the pair to kmmio_handler(). - */ -static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) -{ - int ret = 0; - struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); - - if (!ctx->active) { - pr_debug("kmmio: spurious debug trap on CPU %d.\n", - smp_processor_id()); - goto out; - } - - if (ctx->probe && ctx->probe->post_handler) - ctx->probe->post_handler(ctx->probe, condition, regs); - - arm_kmmio_fault_page(ctx->fpage->page, NULL); - - regs->flags &= ~X86_EFLAGS_TF; - regs->flags |= ctx->saved_flags; - - /* These were acquired in kmmio_handler(). */ - ctx->active--; - BUG_ON(ctx->active); - rcu_read_unlock(); - preempt_enable_no_resched(); - - /* - * if somebody else is singlestepping across a probe point, flags - * will have TF set, in which case, continue the remaining processing - * of do_debug, as if this is not a probe hit. - */ - if (!(regs->flags & X86_EFLAGS_TF)) - ret = 1; -out: - put_cpu_var(kmmio_ctx); - return ret; -} - -/* You must be holding kmmio_lock. */ -static int add_kmmio_fault_page(unsigned long page) -{ - struct kmmio_fault_page *f; - - page &= PAGE_MASK; - f = get_kmmio_fault_page(page); - if (f) { - if (!f->count) - arm_kmmio_fault_page(f->page, NULL); - f->count++; - return 0; - } - - f = kmalloc(sizeof(*f), GFP_ATOMIC); - if (!f) - return -1; - - f->count = 1; - f->page = page; - list_add_rcu(&f->list, kmmio_page_list(f->page)); - - arm_kmmio_fault_page(f->page, NULL); - - return 0; -} - -/* You must be holding kmmio_lock. */ -static void release_kmmio_fault_page(unsigned long page, - struct kmmio_fault_page **release_list) -{ - struct kmmio_fault_page *f; - - page &= PAGE_MASK; - f = get_kmmio_fault_page(page); - if (!f) - return; - - f->count--; - BUG_ON(f->count < 0); - if (!f->count) { - disarm_kmmio_fault_page(f->page, NULL); - f->release_next = *release_list; - *release_list = f; - } -} - -int register_kmmio_probe(struct kmmio_probe *p) -{ - unsigned long flags; - int ret = 0; - unsigned long size = 0; - - spin_lock_irqsave(&kmmio_lock, flags); - if (get_kmmio_probe(p->addr)) { - ret = -EEXIST; - goto out; - } - kmmio_count++; - list_add_rcu(&p->list, &kmmio_probes); - while (size < p->len) { - if (add_kmmio_fault_page(p->addr + size)) - pr_err("kmmio: Unable to set page fault.\n"); - size += PAGE_SIZE; - } -out: - spin_unlock_irqrestore(&kmmio_lock, flags); - /* - * XXX: What should I do here? - * Here was a call to global_flush_tlb(), but it does not exist - * anymore. It seems it's not needed after all. - */ - return ret; -} -EXPORT_SYMBOL(register_kmmio_probe); - -static void rcu_free_kmmio_fault_pages(struct rcu_head *head) -{ - struct kmmio_delayed_release *dr = container_of( - head, - struct kmmio_delayed_release, - rcu); - struct kmmio_fault_page *p = dr->release_list; - while (p) { - struct kmmio_fault_page *next = p->release_next; - BUG_ON(p->count); - kfree(p); - p = next; - } - kfree(dr); -} - -static void remove_kmmio_fault_pages(struct rcu_head *head) -{ - struct kmmio_delayed_release *dr = container_of( - head, - struct kmmio_delayed_release, - rcu); - struct kmmio_fault_page *p = dr->release_list; - struct kmmio_fault_page **prevp = &dr->release_list; - unsigned long flags; - spin_lock_irqsave(&kmmio_lock, flags); - while (p) { - if (!p->count) - list_del_rcu(&p->list); - else - *prevp = p->release_next; - prevp = &p->release_next; - p = p->release_next; - } - spin_unlock_irqrestore(&kmmio_lock, flags); - /* This is the real RCU destroy call. */ - call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); -} - -/* - * Remove a kmmio probe. You have to synchronize_rcu() before you can be - * sure that the callbacks will not be called anymore. Only after that - * you may actually release your struct kmmio_probe. - * - * Unregistering a kmmio fault page has three steps: - * 1. release_kmmio_fault_page() - * Disarm the page, wait a grace period to let all faults finish. - * 2. remove_kmmio_fault_pages() - * Remove the pages from kmmio_page_table. - * 3. rcu_free_kmmio_fault_pages() - * Actally free the kmmio_fault_page structs as with RCU. - */ -void unregister_kmmio_probe(struct kmmio_probe *p) -{ - unsigned long flags; - unsigned long size = 0; - struct kmmio_fault_page *release_list = NULL; - struct kmmio_delayed_release *drelease; - - spin_lock_irqsave(&kmmio_lock, flags); - while (size < p->len) { - release_kmmio_fault_page(p->addr + size, &release_list); - size += PAGE_SIZE; - } - list_del_rcu(&p->list); - kmmio_count--; - spin_unlock_irqrestore(&kmmio_lock, flags); - - drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); - if (!drelease) { - pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); - return; - } - drelease->release_list = release_list; - - /* - * This is not really RCU here. We have just disarmed a set of - * pages so that they cannot trigger page faults anymore. However, - * we cannot remove the pages from kmmio_page_table, - * because a probe hit might be in flight on another CPU. The - * pages are collected into a list, and they will be removed from - * kmmio_page_table when it is certain that no probe hit related to - * these pages can be in flight. RCU grace period sounds like a - * good choice. - * - * If we removed the pages too early, kmmio page fault handler might - * not find the respective kmmio_fault_page and determine it's not - * a kmmio fault, when it actually is. This would lead to madness. - */ - call_rcu(&drelease->rcu, remove_kmmio_fault_pages); -} -EXPORT_SYMBOL(unregister_kmmio_probe); - -static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, - void *args) -{ - struct die_args *arg = args; - - if (val == DIE_DEBUG && (arg->err & DR_STEP)) - if (post_kmmio_handler(arg->err, arg->regs) == 1) - return NOTIFY_STOP; - - return NOTIFY_DONE; -} - -static struct notifier_block nb_die = { - .notifier_call = kmmio_die_notifier -}; - -static int __init init_kmmio(void) -{ - int i; - for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) - INIT_LIST_HEAD(&kmmio_page_table[i]); - return register_die_notifier(&nb_die); -} -fs_initcall(init_kmmio); /* should be before device_initcall() */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c deleted file mode 100644 index 8256546d49bf..000000000000 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ /dev/null @@ -1,457 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2005 - * Jeff Muizelaar, 2006, 2007 - * Pekka Paalanen, 2008 - * - * Derived from the read-mod example from relay-examples by Tom Zanussi. - */ -#define DEBUG 1 - -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for ISA_START_ADDRESS */ -#include -#include - -#include "pf_in.h" - -#define NAME "mmiotrace: " - -struct trap_reason { - unsigned long addr; - unsigned long ip; - enum reason_type type; - int active_traces; -}; - -struct remap_trace { - struct list_head list; - struct kmmio_probe probe; - unsigned long phys; - unsigned long id; -}; - -/* Accessed per-cpu. */ -static DEFINE_PER_CPU(struct trap_reason, pf_reason); -static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace); - -#if 0 /* XXX: no way gather this info anymore */ -/* Access to this is not per-cpu. */ -static DEFINE_PER_CPU(atomic_t, dropped); -#endif - -static struct dentry *marker_file; - -static DEFINE_MUTEX(mmiotrace_mutex); -static DEFINE_SPINLOCK(trace_lock); -static atomic_t mmiotrace_enabled; -static LIST_HEAD(trace_list); /* struct remap_trace */ - -/* - * Locking in this file: - * - mmiotrace_mutex enforces enable/disable_mmiotrace() critical sections. - * - mmiotrace_enabled may be modified only when holding mmiotrace_mutex - * and trace_lock. - * - Routines depending on is_enabled() must take trace_lock. - * - trace_list users must hold trace_lock. - * - is_enabled() guarantees that mmio_trace_record is allowed. - * - pre/post callbacks assume the effect of is_enabled() being true. - */ - -/* module parameters */ -static unsigned long filter_offset; -static int nommiotrace; -static int ISA_trace; -static int trace_pc; - -module_param(filter_offset, ulong, 0); -module_param(nommiotrace, bool, 0); -module_param(ISA_trace, bool, 0); -module_param(trace_pc, bool, 0); - -MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); -MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); -MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); -MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); - -static bool is_enabled(void) -{ - return atomic_read(&mmiotrace_enabled); -} - -#if 0 /* XXX: needs rewrite */ -/* - * Write callback for the debugfs entry: - * Read a marker and write it to the mmio trace log - */ -static ssize_t write_marker(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos) -{ - char *event = NULL; - struct mm_io_header *headp; - ssize_t len = (count > 65535) ? 65535 : count; - - event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); - if (!event) - return -ENOMEM; - - headp = (struct mm_io_header *)event; - headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); - headp->data_len = len; - - if (copy_from_user(event + sizeof(*headp), buffer, len)) { - kfree(event); - return -EFAULT; - } - - spin_lock_irq(&trace_lock); -#if 0 /* XXX: convert this to use tracing */ - if (is_enabled()) - relay_write(chan, event, sizeof(*headp) + len); - else -#endif - len = -EINVAL; - spin_unlock_irq(&trace_lock); - kfree(event); - return len; -} -#endif - -static void print_pte(unsigned long address) -{ - int level; - pte_t *pte = lookup_address(address, &level); - - if (!pte) { - pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", - __func__, address); - return; - } - - if (level == PG_LEVEL_2M) { - pr_emerg(NAME "4MB pages are not currently supported: " - "0x%08lx\n", address); - BUG(); - } - pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), - pte_val(*pte) & _PAGE_PRESENT); -} - -/* - * For some reason the pre/post pairs have been called in an - * unmatched order. Report and die. - */ -static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) -{ - const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - pr_emerg(NAME "unexpected fault for address: 0x%08lx, " - "last fault for address: 0x%08lx\n", - addr, my_reason->addr); - print_pte(addr); - print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); - print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); -#ifdef __i386__ - pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", - regs->ax, regs->bx, regs->cx, regs->dx); - pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", - regs->si, regs->di, regs->bp, regs->sp); -#else - pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", - regs->ax, regs->cx, regs->dx); - pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", - regs->si, regs->di, regs->bp, regs->sp); -#endif - put_cpu_var(pf_reason); - BUG(); -} - -static void pre(struct kmmio_probe *p, struct pt_regs *regs, - unsigned long addr) -{ - struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); - const unsigned long instptr = instruction_pointer(regs); - const enum reason_type type = get_ins_type(instptr); - struct remap_trace *trace = p->user_data; - - /* it doesn't make sense to have more than one active trace per cpu */ - if (my_reason->active_traces) - die_kmmio_nesting_error(regs, addr); - else - my_reason->active_traces++; - - my_reason->type = type; - my_reason->addr = addr; - my_reason->ip = instptr; - - my_trace->phys = addr - trace->probe.addr + trace->phys; - my_trace->map_id = trace->id; - - /* - * Only record the program counter when requested. - * It may taint clean-room reverse engineering. - */ - if (trace_pc) - my_trace->pc = instptr; - else - my_trace->pc = 0; - - /* - * XXX: the timestamp recorded will be *after* the tracing has been - * done, not at the time we hit the instruction. SMP implications - * on event ordering? - */ - - switch (type) { - case REG_READ: - my_trace->opcode = MMIO_READ; - my_trace->width = get_ins_mem_width(instptr); - break; - case REG_WRITE: - my_trace->opcode = MMIO_WRITE; - my_trace->width = get_ins_mem_width(instptr); - my_trace->value = get_ins_reg_val(instptr, regs); - break; - case IMM_WRITE: - my_trace->opcode = MMIO_WRITE; - my_trace->width = get_ins_mem_width(instptr); - my_trace->value = get_ins_imm_val(instptr); - break; - default: - { - unsigned char *ip = (unsigned char *)instptr; - my_trace->opcode = MMIO_UNKNOWN_OP; - my_trace->width = 0; - my_trace->value = (*ip) << 16 | *(ip + 1) << 8 | - *(ip + 2); - } - } - put_cpu_var(cpu_trace); - put_cpu_var(pf_reason); -} - -static void post(struct kmmio_probe *p, unsigned long condition, - struct pt_regs *regs) -{ - struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); - - /* this should always return the active_trace count to 0 */ - my_reason->active_traces--; - if (my_reason->active_traces) { - pr_emerg(NAME "unexpected post handler"); - BUG(); - } - - switch (my_reason->type) { - case REG_READ: - my_trace->value = get_ins_reg_val(my_reason->ip, regs); - break; - default: - break; - } - - mmio_trace_rw(my_trace); - put_cpu_var(cpu_trace); - put_cpu_var(pf_reason); -} - -static void ioremap_trace_core(unsigned long offset, unsigned long size, - void __iomem *addr) -{ - static atomic_t next_id; - struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); - struct mmiotrace_map map = { - .phys = offset, - .virt = (unsigned long)addr, - .len = size, - .opcode = MMIO_PROBE - }; - - if (!trace) { - pr_err(NAME "kmalloc failed in ioremap\n"); - return; - } - - *trace = (struct remap_trace) { - .probe = { - .addr = (unsigned long)addr, - .len = size, - .pre_handler = pre, - .post_handler = post, - .user_data = trace - }, - .phys = offset, - .id = atomic_inc_return(&next_id) - }; - map.map_id = trace->id; - - spin_lock_irq(&trace_lock); - if (!is_enabled()) - goto not_enabled; - - mmio_trace_mapping(&map); - list_add_tail(&trace->list, &trace_list); - if (!nommiotrace) - register_kmmio_probe(&trace->probe); - -not_enabled: - spin_unlock_irq(&trace_lock); -} - -void -mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) -{ - if (!is_enabled()) /* recheck and proper locking in *_core() */ - return; - - pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); - if ((filter_offset) && (offset != filter_offset)) - return; - ioremap_trace_core(offset, size, addr); -} - -static void iounmap_trace_core(volatile void __iomem *addr) -{ - struct mmiotrace_map map = { - .phys = 0, - .virt = (unsigned long)addr, - .len = 0, - .opcode = MMIO_UNPROBE - }; - struct remap_trace *trace; - struct remap_trace *tmp; - struct remap_trace *found_trace = NULL; - - pr_debug(NAME "Unmapping %p.\n", addr); - - spin_lock_irq(&trace_lock); - if (!is_enabled()) - goto not_enabled; - - list_for_each_entry_safe(trace, tmp, &trace_list, list) { - if ((unsigned long)addr == trace->probe.addr) { - if (!nommiotrace) - unregister_kmmio_probe(&trace->probe); - list_del(&trace->list); - found_trace = trace; - break; - } - } - map.map_id = (found_trace) ? found_trace->id : -1; - mmio_trace_mapping(&map); - -not_enabled: - spin_unlock_irq(&trace_lock); - if (found_trace) { - synchronize_rcu(); /* unregister_kmmio_probe() requirement */ - kfree(found_trace); - } -} - -void mmiotrace_iounmap(volatile void __iomem *addr) -{ - might_sleep(); - if (is_enabled()) /* recheck and proper locking in *_core() */ - iounmap_trace_core(addr); -} - -static void clear_trace_list(void) -{ - struct remap_trace *trace; - struct remap_trace *tmp; - - /* - * No locking required, because the caller ensures we are in a - * critical section via mutex, and is_enabled() is false, - * i.e. nothing can traverse or modify this list. - * Caller also ensures is_enabled() cannot change. - */ - list_for_each_entry(trace, &trace_list, list) { - pr_notice(NAME "purging non-iounmapped " - "trace @0x%08lx, size 0x%lx.\n", - trace->probe.addr, trace->probe.len); - if (!nommiotrace) - unregister_kmmio_probe(&trace->probe); - } - synchronize_rcu(); /* unregister_kmmio_probe() requirement */ - - list_for_each_entry_safe(trace, tmp, &trace_list, list) { - list_del(&trace->list); - kfree(trace); - } -} - -#if 0 /* XXX: out of order */ -static struct file_operations fops_marker = { - .owner = THIS_MODULE, - .write = write_marker -}; -#endif - -void enable_mmiotrace(void) -{ - mutex_lock(&mmiotrace_mutex); - if (is_enabled()) - goto out; - -#if 0 /* XXX: tracing does not support text entries */ - marker_file = debugfs_create_file("marker", 0660, dir, NULL, - &fops_marker); - if (!marker_file) - pr_err(NAME "marker file creation failed.\n"); -#endif - - if (nommiotrace) - pr_info(NAME "MMIO tracing disabled.\n"); - if (ISA_trace) - pr_warning(NAME "Warning! low ISA range will be traced.\n"); - spin_lock_irq(&trace_lock); - atomic_inc(&mmiotrace_enabled); - spin_unlock_irq(&trace_lock); - pr_info(NAME "enabled.\n"); -out: - mutex_unlock(&mmiotrace_mutex); -} - -void disable_mmiotrace(void) -{ - mutex_lock(&mmiotrace_mutex); - if (!is_enabled()) - goto out; - - spin_lock_irq(&trace_lock); - atomic_dec(&mmiotrace_enabled); - BUG_ON(is_enabled()); - spin_unlock_irq(&trace_lock); - - clear_trace_list(); /* guarantees: no more kmmio callbacks */ - if (marker_file) { - debugfs_remove(marker_file); - marker_file = NULL; - } - - pr_info(NAME "disabled.\n"); -out: - mutex_unlock(&mmiotrace_mutex); -} diff --git a/arch/x86/kernel/mmiotrace/pf_in.c b/arch/x86/kernel/mmiotrace/pf_in.c deleted file mode 100644 index efa1911e20ca..000000000000 --- a/arch/x86/kernel/mmiotrace/pf_in.c +++ /dev/null @@ -1,489 +0,0 @@ -/* - * Fault Injection Test harness (FI) - * Copyright (C) Intel Crop. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, - * USA. - * - */ - -/* Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp - * Copyright by Intel Crop., 2002 - * Louis Zhuang (louis.zhuang@intel.com) - * - * Bjorn Steinbrink (B.Steinbrink@gmx.de), 2007 - */ - -#include -#include /* struct pt_regs */ -#include "pf_in.h" - -#ifdef __i386__ -/* IA32 Manual 3, 2-1 */ -static unsigned char prefix_codes[] = { - 0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64, - 0x65, 0x2E, 0x3E, 0x66, 0x67 -}; -/* IA32 Manual 3, 3-432*/ -static unsigned int reg_rop[] = { - 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -static unsigned int reg_wop[] = { 0x88, 0x89 }; -static unsigned int imm_wop[] = { 0xC6, 0xC7 }; -/* IA32 Manual 3, 3-432*/ -static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 }; -static unsigned int rw32[] = { - 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F }; -static unsigned int mw16[] = { 0xB70F, 0xBF0F }; -static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 }; -static unsigned int mw64[] = {}; -#else /* not __i386__ */ -static unsigned char prefix_codes[] = { - 0x66, 0x67, 0x2E, 0x3E, 0x26, 0x64, 0x65, 0x36, - 0xF0, 0xF3, 0xF2, - /* REX Prefixes */ - 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, - 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f -}; -/* AMD64 Manual 3, Appendix A*/ -static unsigned int reg_rop[] = { - 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -static unsigned int reg_wop[] = { 0x88, 0x89 }; -static unsigned int imm_wop[] = { 0xC6, 0xC7 }; -static unsigned int rw8[] = { 0xC6, 0x88, 0x8A }; -static unsigned int rw32[] = { - 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -/* 8 bit only */ -static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F }; -/* 16 bit only */ -static unsigned int mw16[] = { 0xB70F, 0xBF0F }; -/* 16 or 32 bit */ -static unsigned int mw32[] = { 0xC7 }; -/* 16, 32 or 64 bit */ -static unsigned int mw64[] = { 0x89, 0x8B }; -#endif /* not __i386__ */ - -static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged, - int *rexr) -{ - int i; - unsigned char *p = addr; - *shorted = 0; - *enlarged = 0; - *rexr = 0; - -restart: - for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) { - if (*p == prefix_codes[i]) { - if (*p == 0x66) - *shorted = 1; -#ifdef __amd64__ - if ((*p & 0xf8) == 0x48) - *enlarged = 1; - if ((*p & 0xf4) == 0x44) - *rexr = 1; -#endif - p++; - goto restart; - } - } - - return (p - addr); -} - -static int get_opcode(unsigned char *addr, unsigned int *opcode) -{ - int len; - - if (*addr == 0x0F) { - /* 0x0F is extension instruction */ - *opcode = *(unsigned short *)addr; - len = 2; - } else { - *opcode = *addr; - len = 1; - } - - return len; -} - -#define CHECK_OP_TYPE(opcode, array, type) \ - for (i = 0; i < ARRAY_SIZE(array); i++) { \ - if (array[i] == opcode) { \ - rv = type; \ - goto exit; \ - } \ - } - -enum reason_type get_ins_type(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char *p; - int shorted, enlarged, rexr; - int i; - enum reason_type rv = OTHERS; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - - CHECK_OP_TYPE(opcode, reg_rop, REG_READ); - CHECK_OP_TYPE(opcode, reg_wop, REG_WRITE); - CHECK_OP_TYPE(opcode, imm_wop, IMM_WRITE); - -exit: - return rv; -} -#undef CHECK_OP_TYPE - -static unsigned int get_ins_reg_width(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char *p; - int i, shorted, enlarged, rexr; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - - for (i = 0; i < ARRAY_SIZE(rw8); i++) - if (rw8[i] == opcode) - return 1; - - for (i = 0; i < ARRAY_SIZE(rw32); i++) - if (rw32[i] == opcode) - return (shorted ? 2 : (enlarged ? 8 : 4)); - - printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); - return 0; -} - -unsigned int get_ins_mem_width(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char *p; - int i, shorted, enlarged, rexr; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - - for (i = 0; i < ARRAY_SIZE(mw8); i++) - if (mw8[i] == opcode) - return 1; - - for (i = 0; i < ARRAY_SIZE(mw16); i++) - if (mw16[i] == opcode) - return 2; - - for (i = 0; i < ARRAY_SIZE(mw32); i++) - if (mw32[i] == opcode) - return shorted ? 2 : 4; - - for (i = 0; i < ARRAY_SIZE(mw64); i++) - if (mw64[i] == opcode) - return shorted ? 2 : (enlarged ? 8 : 4); - - printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); - return 0; -} - -/* - * Define register ident in mod/rm byte. - * Note: these are NOT the same as in ptrace-abi.h. - */ -enum { - arg_AL = 0, - arg_CL = 1, - arg_DL = 2, - arg_BL = 3, - arg_AH = 4, - arg_CH = 5, - arg_DH = 6, - arg_BH = 7, - - arg_AX = 0, - arg_CX = 1, - arg_DX = 2, - arg_BX = 3, - arg_SP = 4, - arg_BP = 5, - arg_SI = 6, - arg_DI = 7, -#ifdef __amd64__ - arg_R8 = 8, - arg_R9 = 9, - arg_R10 = 10, - arg_R11 = 11, - arg_R12 = 12, - arg_R13 = 13, - arg_R14 = 14, - arg_R15 = 15 -#endif -}; - -static unsigned char *get_reg_w8(int no, struct pt_regs *regs) -{ - unsigned char *rv = NULL; - - switch (no) { - case arg_AL: - rv = (unsigned char *)®s->ax; - break; - case arg_BL: - rv = (unsigned char *)®s->bx; - break; - case arg_CL: - rv = (unsigned char *)®s->cx; - break; - case arg_DL: - rv = (unsigned char *)®s->dx; - break; - case arg_AH: - rv = 1 + (unsigned char *)®s->ax; - break; - case arg_BH: - rv = 1 + (unsigned char *)®s->bx; - break; - case arg_CH: - rv = 1 + (unsigned char *)®s->cx; - break; - case arg_DH: - rv = 1 + (unsigned char *)®s->dx; - break; -#ifdef __amd64__ - case arg_R8: - rv = (unsigned char *)®s->r8; - break; - case arg_R9: - rv = (unsigned char *)®s->r9; - break; - case arg_R10: - rv = (unsigned char *)®s->r10; - break; - case arg_R11: - rv = (unsigned char *)®s->r11; - break; - case arg_R12: - rv = (unsigned char *)®s->r12; - break; - case arg_R13: - rv = (unsigned char *)®s->r13; - break; - case arg_R14: - rv = (unsigned char *)®s->r14; - break; - case arg_R15: - rv = (unsigned char *)®s->r15; - break; -#endif - default: - printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); - break; - } - return rv; -} - -static unsigned long *get_reg_w32(int no, struct pt_regs *regs) -{ - unsigned long *rv = NULL; - - switch (no) { - case arg_AX: - rv = ®s->ax; - break; - case arg_BX: - rv = ®s->bx; - break; - case arg_CX: - rv = ®s->cx; - break; - case arg_DX: - rv = ®s->dx; - break; - case arg_SP: - rv = ®s->sp; - break; - case arg_BP: - rv = ®s->bp; - break; - case arg_SI: - rv = ®s->si; - break; - case arg_DI: - rv = ®s->di; - break; -#ifdef __amd64__ - case arg_R8: - rv = ®s->r8; - break; - case arg_R9: - rv = ®s->r9; - break; - case arg_R10: - rv = ®s->r10; - break; - case arg_R11: - rv = ®s->r11; - break; - case arg_R12: - rv = ®s->r12; - break; - case arg_R13: - rv = ®s->r13; - break; - case arg_R14: - rv = ®s->r14; - break; - case arg_R15: - rv = ®s->r15; - break; -#endif - default: - printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); - } - - return rv; -} - -unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) -{ - unsigned int opcode; - unsigned char mod_rm; - int reg; - unsigned char *p; - int i, shorted, enlarged, rexr; - unsigned long rv; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - for (i = 0; i < ARRAY_SIZE(reg_rop); i++) - if (reg_rop[i] == opcode) { - rv = REG_READ; - goto do_work; - } - - for (i = 0; i < ARRAY_SIZE(reg_wop); i++) - if (reg_wop[i] == opcode) { - rv = REG_WRITE; - goto do_work; - } - - printk(KERN_ERR "mmiotrace: Not a register instruction, opcode " - "0x%02x\n", opcode); - goto err; - -do_work: - mod_rm = *p; - reg = ((mod_rm >> 3) & 0x7) | (rexr << 3); - switch (get_ins_reg_width(ins_addr)) { - case 1: - return *get_reg_w8(reg, regs); - - case 2: - return *(unsigned short *)get_reg_w32(reg, regs); - - case 4: - return *(unsigned int *)get_reg_w32(reg, regs); - -#ifdef __amd64__ - case 8: - return *(unsigned long *)get_reg_w32(reg, regs); -#endif - - default: - printk(KERN_ERR "mmiotrace: Error width# %d\n", reg); - } - -err: - return 0; -} - -unsigned long get_ins_imm_val(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char mod_rm; - unsigned char mod; - unsigned char *p; - int i, shorted, enlarged, rexr; - unsigned long rv; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - for (i = 0; i < ARRAY_SIZE(imm_wop); i++) - if (imm_wop[i] == opcode) { - rv = IMM_WRITE; - goto do_work; - } - - printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode " - "0x%02x\n", opcode); - goto err; - -do_work: - mod_rm = *p; - mod = mod_rm >> 6; - p++; - switch (mod) { - case 0: - /* if r/m is 5 we have a 32 disp (IA32 Manual 3, Table 2-2) */ - /* AMD64: XXX Check for address size prefix? */ - if ((mod_rm & 0x7) == 0x5) - p += 4; - break; - - case 1: - p += 1; - break; - - case 2: - p += 4; - break; - - case 3: - default: - printk(KERN_ERR "mmiotrace: not a memory access instruction " - "at 0x%lx, rm_mod=0x%02x\n", - ins_addr, mod_rm); - } - - switch (get_ins_reg_width(ins_addr)) { - case 1: - return *(unsigned char *)p; - - case 2: - return *(unsigned short *)p; - - case 4: - return *(unsigned int *)p; - -#ifdef __amd64__ - case 8: - return *(unsigned long *)p; -#endif - - default: - printk(KERN_ERR "mmiotrace: Error: width.\n"); - } - -err: - return 0; -} diff --git a/arch/x86/kernel/mmiotrace/pf_in.h b/arch/x86/kernel/mmiotrace/pf_in.h deleted file mode 100644 index e05341a51a27..000000000000 --- a/arch/x86/kernel/mmiotrace/pf_in.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Fault Injection Test harness (FI) - * Copyright (C) Intel Crop. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, - * USA. - * - */ - -#ifndef __PF_H_ -#define __PF_H_ - -enum reason_type { - NOT_ME, /* page fault is not in regions */ - NOTHING, /* access others point in regions */ - REG_READ, /* read from addr to reg */ - REG_WRITE, /* write from reg to addr */ - IMM_WRITE, /* write from imm to addr */ - OTHERS /* Other instructions can not intercept */ -}; - -enum reason_type get_ins_type(unsigned long ins_addr); -unsigned int get_ins_mem_width(unsigned long ins_addr); -unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs); -unsigned long get_ins_imm_val(unsigned long ins_addr); - -#endif /* __PF_H_ */ diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c deleted file mode 100644 index cfa60b227c8d..000000000000 --- a/arch/x86/kernel/mmiotrace/testmmiotrace.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Written by Pekka Paalanen, 2008 - */ -#include -#include - -#define MODULE_NAME "testmmiotrace" - -static unsigned long mmio_address; -module_param(mmio_address, ulong, 0); -MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB."); - -static void do_write_test(void __iomem *p) -{ - unsigned int i; - for (i = 0; i < 256; i++) - iowrite8(i, p + i); - for (i = 1024; i < (5 * 1024); i += 2) - iowrite16(i * 12 + 7, p + i); - for (i = (5 * 1024); i < (16 * 1024); i += 4) - iowrite32(i * 212371 + 13, p + i); -} - -static void do_read_test(void __iomem *p) -{ - unsigned int i; - for (i = 0; i < 256; i++) - ioread8(p + i); - for (i = 1024; i < (5 * 1024); i += 2) - ioread16(p + i); - for (i = (5 * 1024); i < (16 * 1024); i += 4) - ioread32(p + i); -} - -static void do_test(void) -{ - void __iomem *p = ioremap_nocache(mmio_address, 0x4000); - if (!p) { - pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); - return; - } - do_write_test(p); - do_read_test(p); - iounmap(p); -} - -static int __init init(void) -{ - if (mmio_address == 0) { - pr_err(MODULE_NAME ": you have to use the module argument " - "mmio_address.\n"); - pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" - " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); - return -ENXIO; - } - - pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " - "in PCI address space, and writing " - "rubbish in there.\n", mmio_address); - do_test(); - return 0; -} - -static void __exit cleanup(void) -{ - pr_debug(MODULE_NAME ": unloaded.\n"); -} - -module_init(init); -module_exit(cleanup); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index b7b3e4c7cfc9..07dab503c9e3 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -8,6 +8,11 @@ obj-$(CONFIG_X86_PTDUMP) += dump_pagetables.o obj-$(CONFIG_HIGHMEM) += highmem_32.o +obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o +obj-$(CONFIG_MMIOTRACE) += mmiotrace.o +mmiotrace-y := pf_in.o mmio-mod.o +obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o + ifeq ($(CONFIG_X86_32),y) obj-$(CONFIG_NUMA) += discontig_32.o else diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c new file mode 100644 index 000000000000..3ad27b8504a5 --- /dev/null +++ b/arch/x86/mm/kmmio.c @@ -0,0 +1,499 @@ +/* Support for MMIO probes. + * Benfit many code from kprobes + * (C) 2002 Louis Zhuang . + * 2007 Alexander Eichner + * 2008 Pekka Paalanen + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define KMMIO_PAGE_HASH_BITS 4 +#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) + +struct kmmio_fault_page { + struct list_head list; + struct kmmio_fault_page *release_next; + unsigned long page; /* location of the fault page */ + + /* + * Number of times this page has been registered as a part + * of a probe. If zero, page is disarmed and this may be freed. + * Used only by writers (RCU). + */ + int count; +}; + +struct kmmio_delayed_release { + struct rcu_head rcu; + struct kmmio_fault_page *release_list; +}; + +struct kmmio_context { + struct kmmio_fault_page *fpage; + struct kmmio_probe *probe; + unsigned long saved_flags; + unsigned long addr; + int active; +}; + +static DEFINE_SPINLOCK(kmmio_lock); + +/* Protected by kmmio_lock */ +unsigned int kmmio_count; + +/* Read-protected by RCU, write-protected by kmmio_lock. */ +static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; +static LIST_HEAD(kmmio_probes); + +static struct list_head *kmmio_page_list(unsigned long page) +{ + return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; +} + +/* Accessed per-cpu */ +static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); + +/* + * this is basically a dynamic stabbing problem: + * Could use the existing prio tree code or + * Possible better implementations: + * The Interval Skip List: A Data Structure for Finding All Intervals That + * Overlap a Point (might be simple) + * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup + */ +/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */ +static struct kmmio_probe *get_kmmio_probe(unsigned long addr) +{ + struct kmmio_probe *p; + list_for_each_entry_rcu(p, &kmmio_probes, list) { + if (addr >= p->addr && addr <= (p->addr + p->len)) + return p; + } + return NULL; +} + +/* You must be holding RCU read lock. */ +static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) +{ + struct list_head *head; + struct kmmio_fault_page *p; + + page &= PAGE_MASK; + head = kmmio_page_list(page); + list_for_each_entry_rcu(p, head, list) { + if (p->page == page) + return p; + } + return NULL; +} + +static void set_page_present(unsigned long addr, bool present, int *pglevel) +{ + pteval_t pteval; + pmdval_t pmdval; + int level; + pmd_t *pmd; + pte_t *pte = lookup_address(addr, &level); + + if (!pte) { + pr_err("kmmio: no pte for page 0x%08lx\n", addr); + return; + } + + if (pglevel) + *pglevel = level; + + switch (level) { + case PG_LEVEL_2M: + pmd = (pmd_t *)pte; + pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT; + if (present) + pmdval |= _PAGE_PRESENT; + set_pmd(pmd, __pmd(pmdval)); + break; + + case PG_LEVEL_4K: + pteval = pte_val(*pte) & ~_PAGE_PRESENT; + if (present) + pteval |= _PAGE_PRESENT; + set_pte_atomic(pte, __pte(pteval)); + break; + + default: + pr_err("kmmio: unexpected page level 0x%x.\n", level); + return; + } + + __flush_tlb_one(addr); +} + +/** Mark the given page as not present. Access to it will trigger a fault. */ +static void arm_kmmio_fault_page(unsigned long page, int *page_level) +{ + set_page_present(page & PAGE_MASK, false, page_level); +} + +/** Mark the given page as present. */ +static void disarm_kmmio_fault_page(unsigned long page, int *page_level) +{ + set_page_present(page & PAGE_MASK, true, page_level); +} + +/* + * This is being called from do_page_fault(). + * + * We may be in an interrupt or a critical section. Also prefecthing may + * trigger a page fault. We may be in the middle of process switch. + * We cannot take any locks, because we could be executing especially + * within a kmmio critical section. + * + * Local interrupts are disabled, so preemption cannot happen. + * Do not enable interrupts, do not sleep, and watch out for other CPUs. + */ +/* + * Interrupts are disabled on entry as trap3 is an interrupt gate + * and they remain disabled thorough out this function. + */ +int kmmio_handler(struct pt_regs *regs, unsigned long addr) +{ + struct kmmio_context *ctx; + struct kmmio_fault_page *faultpage; + int ret = 0; /* default to fault not handled */ + + /* + * Preemption is now disabled to prevent process switch during + * single stepping. We can only handle one active kmmio trace + * per cpu, so ensure that we finish it before something else + * gets to run. We also hold the RCU read lock over single + * stepping to avoid looking up the probe and kmmio_fault_page + * again. + */ + preempt_disable(); + rcu_read_lock(); + + faultpage = get_kmmio_fault_page(addr); + if (!faultpage) { + /* + * Either this page fault is not caused by kmmio, or + * another CPU just pulled the kmmio probe from under + * our feet. The latter case should not be possible. + */ + goto no_kmmio; + } + + ctx = &get_cpu_var(kmmio_ctx); + if (ctx->active) { + disarm_kmmio_fault_page(faultpage->page, NULL); + if (addr == ctx->addr) { + /* + * On SMP we sometimes get recursive probe hits on the + * same address. Context is already saved, fall out. + */ + pr_debug("kmmio: duplicate probe hit on CPU %d, for " + "address 0x%08lx.\n", + smp_processor_id(), addr); + ret = 1; + goto no_kmmio_ctx; + } + /* + * Prevent overwriting already in-flight context. + * This should not happen, let's hope disarming at least + * prevents a panic. + */ + pr_emerg("kmmio: recursive probe hit on CPU %d, " + "for address 0x%08lx. Ignoring.\n", + smp_processor_id(), addr); + pr_emerg("kmmio: previous hit was at 0x%08lx.\n", + ctx->addr); + goto no_kmmio_ctx; + } + ctx->active++; + + ctx->fpage = faultpage; + ctx->probe = get_kmmio_probe(addr); + ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF)); + ctx->addr = addr; + + if (ctx->probe && ctx->probe->pre_handler) + ctx->probe->pre_handler(ctx->probe, regs, addr); + + /* + * Enable single-stepping and disable interrupts for the faulting + * context. Local interrupts must not get enabled during stepping. + */ + regs->flags |= X86_EFLAGS_TF; + regs->flags &= ~X86_EFLAGS_IF; + + /* Now we set present bit in PTE and single step. */ + disarm_kmmio_fault_page(ctx->fpage->page, NULL); + + /* + * If another cpu accesses the same page while we are stepping, + * the access will not be caught. It will simply succeed and the + * only downside is we lose the event. If this becomes a problem, + * the user should drop to single cpu before tracing. + */ + + put_cpu_var(kmmio_ctx); + return 1; /* fault handled */ + +no_kmmio_ctx: + put_cpu_var(kmmio_ctx); +no_kmmio: + rcu_read_unlock(); + preempt_enable_no_resched(); + return ret; +} + +/* + * Interrupts are disabled on entry as trap1 is an interrupt gate + * and they remain disabled thorough out this function. + * This must always get called as the pair to kmmio_handler(). + */ +static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) +{ + int ret = 0; + struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); + + if (!ctx->active) { + pr_debug("kmmio: spurious debug trap on CPU %d.\n", + smp_processor_id()); + goto out; + } + + if (ctx->probe && ctx->probe->post_handler) + ctx->probe->post_handler(ctx->probe, condition, regs); + + arm_kmmio_fault_page(ctx->fpage->page, NULL); + + regs->flags &= ~X86_EFLAGS_TF; + regs->flags |= ctx->saved_flags; + + /* These were acquired in kmmio_handler(). */ + ctx->active--; + BUG_ON(ctx->active); + rcu_read_unlock(); + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, flags + * will have TF set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (!(regs->flags & X86_EFLAGS_TF)) + ret = 1; +out: + put_cpu_var(kmmio_ctx); + return ret; +} + +/* You must be holding kmmio_lock. */ +static int add_kmmio_fault_page(unsigned long page) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (f) { + if (!f->count) + arm_kmmio_fault_page(f->page, NULL); + f->count++; + return 0; + } + + f = kmalloc(sizeof(*f), GFP_ATOMIC); + if (!f) + return -1; + + f->count = 1; + f->page = page; + list_add_rcu(&f->list, kmmio_page_list(f->page)); + + arm_kmmio_fault_page(f->page, NULL); + + return 0; +} + +/* You must be holding kmmio_lock. */ +static void release_kmmio_fault_page(unsigned long page, + struct kmmio_fault_page **release_list) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (!f) + return; + + f->count--; + BUG_ON(f->count < 0); + if (!f->count) { + disarm_kmmio_fault_page(f->page, NULL); + f->release_next = *release_list; + *release_list = f; + } +} + +int register_kmmio_probe(struct kmmio_probe *p) +{ + unsigned long flags; + int ret = 0; + unsigned long size = 0; + + spin_lock_irqsave(&kmmio_lock, flags); + if (get_kmmio_probe(p->addr)) { + ret = -EEXIST; + goto out; + } + kmmio_count++; + list_add_rcu(&p->list, &kmmio_probes); + while (size < p->len) { + if (add_kmmio_fault_page(p->addr + size)) + pr_err("kmmio: Unable to set page fault.\n"); + size += PAGE_SIZE; + } +out: + spin_unlock_irqrestore(&kmmio_lock, flags); + /* + * XXX: What should I do here? + * Here was a call to global_flush_tlb(), but it does not exist + * anymore. It seems it's not needed after all. + */ + return ret; +} +EXPORT_SYMBOL(register_kmmio_probe); + +static void rcu_free_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + while (p) { + struct kmmio_fault_page *next = p->release_next; + BUG_ON(p->count); + kfree(p); + p = next; + } + kfree(dr); +} + +static void remove_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + struct kmmio_fault_page **prevp = &dr->release_list; + unsigned long flags; + spin_lock_irqsave(&kmmio_lock, flags); + while (p) { + if (!p->count) + list_del_rcu(&p->list); + else + *prevp = p->release_next; + prevp = &p->release_next; + p = p->release_next; + } + spin_unlock_irqrestore(&kmmio_lock, flags); + /* This is the real RCU destroy call. */ + call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); +} + +/* + * Remove a kmmio probe. You have to synchronize_rcu() before you can be + * sure that the callbacks will not be called anymore. Only after that + * you may actually release your struct kmmio_probe. + * + * Unregistering a kmmio fault page has three steps: + * 1. release_kmmio_fault_page() + * Disarm the page, wait a grace period to let all faults finish. + * 2. remove_kmmio_fault_pages() + * Remove the pages from kmmio_page_table. + * 3. rcu_free_kmmio_fault_pages() + * Actally free the kmmio_fault_page structs as with RCU. + */ +void unregister_kmmio_probe(struct kmmio_probe *p) +{ + unsigned long flags; + unsigned long size = 0; + struct kmmio_fault_page *release_list = NULL; + struct kmmio_delayed_release *drelease; + + spin_lock_irqsave(&kmmio_lock, flags); + while (size < p->len) { + release_kmmio_fault_page(p->addr + size, &release_list); + size += PAGE_SIZE; + } + list_del_rcu(&p->list); + kmmio_count--; + spin_unlock_irqrestore(&kmmio_lock, flags); + + drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); + if (!drelease) { + pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); + return; + } + drelease->release_list = release_list; + + /* + * This is not really RCU here. We have just disarmed a set of + * pages so that they cannot trigger page faults anymore. However, + * we cannot remove the pages from kmmio_page_table, + * because a probe hit might be in flight on another CPU. The + * pages are collected into a list, and they will be removed from + * kmmio_page_table when it is certain that no probe hit related to + * these pages can be in flight. RCU grace period sounds like a + * good choice. + * + * If we removed the pages too early, kmmio page fault handler might + * not find the respective kmmio_fault_page and determine it's not + * a kmmio fault, when it actually is. This would lead to madness. + */ + call_rcu(&drelease->rcu, remove_kmmio_fault_pages); +} +EXPORT_SYMBOL(unregister_kmmio_probe); + +static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, + void *args) +{ + struct die_args *arg = args; + + if (val == DIE_DEBUG && (arg->err & DR_STEP)) + if (post_kmmio_handler(arg->err, arg->regs) == 1) + return NOTIFY_STOP; + + return NOTIFY_DONE; +} + +static struct notifier_block nb_die = { + .notifier_call = kmmio_die_notifier +}; + +static int __init init_kmmio(void) +{ + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + return register_die_notifier(&nb_die); +} +fs_initcall(init_kmmio); /* should be before device_initcall() */ diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c new file mode 100644 index 000000000000..8256546d49bf --- /dev/null +++ b/arch/x86/mm/mmio-mod.c @@ -0,0 +1,457 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2005 + * Jeff Muizelaar, 2006, 2007 + * Pekka Paalanen, 2008 + * + * Derived from the read-mod example from relay-examples by Tom Zanussi. + */ +#define DEBUG 1 + +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for ISA_START_ADDRESS */ +#include +#include + +#include "pf_in.h" + +#define NAME "mmiotrace: " + +struct trap_reason { + unsigned long addr; + unsigned long ip; + enum reason_type type; + int active_traces; +}; + +struct remap_trace { + struct list_head list; + struct kmmio_probe probe; + unsigned long phys; + unsigned long id; +}; + +/* Accessed per-cpu. */ +static DEFINE_PER_CPU(struct trap_reason, pf_reason); +static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace); + +#if 0 /* XXX: no way gather this info anymore */ +/* Access to this is not per-cpu. */ +static DEFINE_PER_CPU(atomic_t, dropped); +#endif + +static struct dentry *marker_file; + +static DEFINE_MUTEX(mmiotrace_mutex); +static DEFINE_SPINLOCK(trace_lock); +static atomic_t mmiotrace_enabled; +static LIST_HEAD(trace_list); /* struct remap_trace */ + +/* + * Locking in this file: + * - mmiotrace_mutex enforces enable/disable_mmiotrace() critical sections. + * - mmiotrace_enabled may be modified only when holding mmiotrace_mutex + * and trace_lock. + * - Routines depending on is_enabled() must take trace_lock. + * - trace_list users must hold trace_lock. + * - is_enabled() guarantees that mmio_trace_record is allowed. + * - pre/post callbacks assume the effect of is_enabled() being true. + */ + +/* module parameters */ +static unsigned long filter_offset; +static int nommiotrace; +static int ISA_trace; +static int trace_pc; + +module_param(filter_offset, ulong, 0); +module_param(nommiotrace, bool, 0); +module_param(ISA_trace, bool, 0); +module_param(trace_pc, bool, 0); + +MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); +MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); +MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); +MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); + +static bool is_enabled(void) +{ + return atomic_read(&mmiotrace_enabled); +} + +#if 0 /* XXX: needs rewrite */ +/* + * Write callback for the debugfs entry: + * Read a marker and write it to the mmio trace log + */ +static ssize_t write_marker(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + char *event = NULL; + struct mm_io_header *headp; + ssize_t len = (count > 65535) ? 65535 : count; + + event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); + if (!event) + return -ENOMEM; + + headp = (struct mm_io_header *)event; + headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); + headp->data_len = len; + + if (copy_from_user(event + sizeof(*headp), buffer, len)) { + kfree(event); + return -EFAULT; + } + + spin_lock_irq(&trace_lock); +#if 0 /* XXX: convert this to use tracing */ + if (is_enabled()) + relay_write(chan, event, sizeof(*headp) + len); + else +#endif + len = -EINVAL; + spin_unlock_irq(&trace_lock); + kfree(event); + return len; +} +#endif + +static void print_pte(unsigned long address) +{ + int level; + pte_t *pte = lookup_address(address, &level); + + if (!pte) { + pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", + __func__, address); + return; + } + + if (level == PG_LEVEL_2M) { + pr_emerg(NAME "4MB pages are not currently supported: " + "0x%08lx\n", address); + BUG(); + } + pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), + pte_val(*pte) & _PAGE_PRESENT); +} + +/* + * For some reason the pre/post pairs have been called in an + * unmatched order. Report and die. + */ +static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) +{ + const struct trap_reason *my_reason = &get_cpu_var(pf_reason); + pr_emerg(NAME "unexpected fault for address: 0x%08lx, " + "last fault for address: 0x%08lx\n", + addr, my_reason->addr); + print_pte(addr); + print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); +#ifdef __i386__ + pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + regs->ax, regs->bx, regs->cx, regs->dx); + pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#else + pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", + regs->ax, regs->cx, regs->dx); + pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#endif + put_cpu_var(pf_reason); + BUG(); +} + +static void pre(struct kmmio_probe *p, struct pt_regs *regs, + unsigned long addr) +{ + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); + const unsigned long instptr = instruction_pointer(regs); + const enum reason_type type = get_ins_type(instptr); + struct remap_trace *trace = p->user_data; + + /* it doesn't make sense to have more than one active trace per cpu */ + if (my_reason->active_traces) + die_kmmio_nesting_error(regs, addr); + else + my_reason->active_traces++; + + my_reason->type = type; + my_reason->addr = addr; + my_reason->ip = instptr; + + my_trace->phys = addr - trace->probe.addr + trace->phys; + my_trace->map_id = trace->id; + + /* + * Only record the program counter when requested. + * It may taint clean-room reverse engineering. + */ + if (trace_pc) + my_trace->pc = instptr; + else + my_trace->pc = 0; + + /* + * XXX: the timestamp recorded will be *after* the tracing has been + * done, not at the time we hit the instruction. SMP implications + * on event ordering? + */ + + switch (type) { + case REG_READ: + my_trace->opcode = MMIO_READ; + my_trace->width = get_ins_mem_width(instptr); + break; + case REG_WRITE: + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_reg_val(instptr, regs); + break; + case IMM_WRITE: + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_imm_val(instptr); + break; + default: + { + unsigned char *ip = (unsigned char *)instptr; + my_trace->opcode = MMIO_UNKNOWN_OP; + my_trace->width = 0; + my_trace->value = (*ip) << 16 | *(ip + 1) << 8 | + *(ip + 2); + } + } + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); +} + +static void post(struct kmmio_probe *p, unsigned long condition, + struct pt_regs *regs) +{ + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); + + /* this should always return the active_trace count to 0 */ + my_reason->active_traces--; + if (my_reason->active_traces) { + pr_emerg(NAME "unexpected post handler"); + BUG(); + } + + switch (my_reason->type) { + case REG_READ: + my_trace->value = get_ins_reg_val(my_reason->ip, regs); + break; + default: + break; + } + + mmio_trace_rw(my_trace); + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); +} + +static void ioremap_trace_core(unsigned long offset, unsigned long size, + void __iomem *addr) +{ + static atomic_t next_id; + struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); + struct mmiotrace_map map = { + .phys = offset, + .virt = (unsigned long)addr, + .len = size, + .opcode = MMIO_PROBE + }; + + if (!trace) { + pr_err(NAME "kmalloc failed in ioremap\n"); + return; + } + + *trace = (struct remap_trace) { + .probe = { + .addr = (unsigned long)addr, + .len = size, + .pre_handler = pre, + .post_handler = post, + .user_data = trace + }, + .phys = offset, + .id = atomic_inc_return(&next_id) + }; + map.map_id = trace->id; + + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + + mmio_trace_mapping(&map); + list_add_tail(&trace->list, &trace_list); + if (!nommiotrace) + register_kmmio_probe(&trace->probe); + +not_enabled: + spin_unlock_irq(&trace_lock); +} + +void +mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) +{ + if (!is_enabled()) /* recheck and proper locking in *_core() */ + return; + + pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); + if ((filter_offset) && (offset != filter_offset)) + return; + ioremap_trace_core(offset, size, addr); +} + +static void iounmap_trace_core(volatile void __iomem *addr) +{ + struct mmiotrace_map map = { + .phys = 0, + .virt = (unsigned long)addr, + .len = 0, + .opcode = MMIO_UNPROBE + }; + struct remap_trace *trace; + struct remap_trace *tmp; + struct remap_trace *found_trace = NULL; + + pr_debug(NAME "Unmapping %p.\n", addr); + + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + if ((unsigned long)addr == trace->probe.addr) { + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + list_del(&trace->list); + found_trace = trace; + break; + } + } + map.map_id = (found_trace) ? found_trace->id : -1; + mmio_trace_mapping(&map); + +not_enabled: + spin_unlock_irq(&trace_lock); + if (found_trace) { + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + kfree(found_trace); + } +} + +void mmiotrace_iounmap(volatile void __iomem *addr) +{ + might_sleep(); + if (is_enabled()) /* recheck and proper locking in *_core() */ + iounmap_trace_core(addr); +} + +static void clear_trace_list(void) +{ + struct remap_trace *trace; + struct remap_trace *tmp; + + /* + * No locking required, because the caller ensures we are in a + * critical section via mutex, and is_enabled() is false, + * i.e. nothing can traverse or modify this list. + * Caller also ensures is_enabled() cannot change. + */ + list_for_each_entry(trace, &trace_list, list) { + pr_notice(NAME "purging non-iounmapped " + "trace @0x%08lx, size 0x%lx.\n", + trace->probe.addr, trace->probe.len); + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + } + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + list_del(&trace->list); + kfree(trace); + } +} + +#if 0 /* XXX: out of order */ +static struct file_operations fops_marker = { + .owner = THIS_MODULE, + .write = write_marker +}; +#endif + +void enable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (is_enabled()) + goto out; + +#if 0 /* XXX: tracing does not support text entries */ + marker_file = debugfs_create_file("marker", 0660, dir, NULL, + &fops_marker); + if (!marker_file) + pr_err(NAME "marker file creation failed.\n"); +#endif + + if (nommiotrace) + pr_info(NAME "MMIO tracing disabled.\n"); + if (ISA_trace) + pr_warning(NAME "Warning! low ISA range will be traced.\n"); + spin_lock_irq(&trace_lock); + atomic_inc(&mmiotrace_enabled); + spin_unlock_irq(&trace_lock); + pr_info(NAME "enabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); +} + +void disable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (!is_enabled()) + goto out; + + spin_lock_irq(&trace_lock); + atomic_dec(&mmiotrace_enabled); + BUG_ON(is_enabled()); + spin_unlock_irq(&trace_lock); + + clear_trace_list(); /* guarantees: no more kmmio callbacks */ + if (marker_file) { + debugfs_remove(marker_file); + marker_file = NULL; + } + + pr_info(NAME "disabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); +} diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c new file mode 100644 index 000000000000..efa1911e20ca --- /dev/null +++ b/arch/x86/mm/pf_in.c @@ -0,0 +1,489 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +/* Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp + * Copyright by Intel Crop., 2002 + * Louis Zhuang (louis.zhuang@intel.com) + * + * Bjorn Steinbrink (B.Steinbrink@gmx.de), 2007 + */ + +#include +#include /* struct pt_regs */ +#include "pf_in.h" + +#ifdef __i386__ +/* IA32 Manual 3, 2-1 */ +static unsigned char prefix_codes[] = { + 0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64, + 0x65, 0x2E, 0x3E, 0x66, 0x67 +}; +/* IA32 Manual 3, 3-432*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +/* IA32 Manual 3, 3-432*/ +static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 }; +static unsigned int rw32[] = { + 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F }; +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 }; +static unsigned int mw64[] = {}; +#else /* not __i386__ */ +static unsigned char prefix_codes[] = { + 0x66, 0x67, 0x2E, 0x3E, 0x26, 0x64, 0x65, 0x36, + 0xF0, 0xF3, 0xF2, + /* REX Prefixes */ + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f +}; +/* AMD64 Manual 3, Appendix A*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +static unsigned int rw8[] = { 0xC6, 0x88, 0x8A }; +static unsigned int rw32[] = { + 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +/* 8 bit only */ +static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F }; +/* 16 bit only */ +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +/* 16 or 32 bit */ +static unsigned int mw32[] = { 0xC7 }; +/* 16, 32 or 64 bit */ +static unsigned int mw64[] = { 0x89, 0x8B }; +#endif /* not __i386__ */ + +static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged, + int *rexr) +{ + int i; + unsigned char *p = addr; + *shorted = 0; + *enlarged = 0; + *rexr = 0; + +restart: + for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) { + if (*p == prefix_codes[i]) { + if (*p == 0x66) + *shorted = 1; +#ifdef __amd64__ + if ((*p & 0xf8) == 0x48) + *enlarged = 1; + if ((*p & 0xf4) == 0x44) + *rexr = 1; +#endif + p++; + goto restart; + } + } + + return (p - addr); +} + +static int get_opcode(unsigned char *addr, unsigned int *opcode) +{ + int len; + + if (*addr == 0x0F) { + /* 0x0F is extension instruction */ + *opcode = *(unsigned short *)addr; + len = 2; + } else { + *opcode = *addr; + len = 1; + } + + return len; +} + +#define CHECK_OP_TYPE(opcode, array, type) \ + for (i = 0; i < ARRAY_SIZE(array); i++) { \ + if (array[i] == opcode) { \ + rv = type; \ + goto exit; \ + } \ + } + +enum reason_type get_ins_type(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int shorted, enlarged, rexr; + int i; + enum reason_type rv = OTHERS; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + CHECK_OP_TYPE(opcode, reg_rop, REG_READ); + CHECK_OP_TYPE(opcode, reg_wop, REG_WRITE); + CHECK_OP_TYPE(opcode, imm_wop, IMM_WRITE); + +exit: + return rv; +} +#undef CHECK_OP_TYPE + +static unsigned int get_ins_reg_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(rw8); i++) + if (rw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(rw32); i++) + if (rw32[i] == opcode) + return (shorted ? 2 : (enlarged ? 8 : 4)); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +unsigned int get_ins_mem_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(mw8); i++) + if (mw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(mw16); i++) + if (mw16[i] == opcode) + return 2; + + for (i = 0; i < ARRAY_SIZE(mw32); i++) + if (mw32[i] == opcode) + return shorted ? 2 : 4; + + for (i = 0; i < ARRAY_SIZE(mw64); i++) + if (mw64[i] == opcode) + return shorted ? 2 : (enlarged ? 8 : 4); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +/* + * Define register ident in mod/rm byte. + * Note: these are NOT the same as in ptrace-abi.h. + */ +enum { + arg_AL = 0, + arg_CL = 1, + arg_DL = 2, + arg_BL = 3, + arg_AH = 4, + arg_CH = 5, + arg_DH = 6, + arg_BH = 7, + + arg_AX = 0, + arg_CX = 1, + arg_DX = 2, + arg_BX = 3, + arg_SP = 4, + arg_BP = 5, + arg_SI = 6, + arg_DI = 7, +#ifdef __amd64__ + arg_R8 = 8, + arg_R9 = 9, + arg_R10 = 10, + arg_R11 = 11, + arg_R12 = 12, + arg_R13 = 13, + arg_R14 = 14, + arg_R15 = 15 +#endif +}; + +static unsigned char *get_reg_w8(int no, struct pt_regs *regs) +{ + unsigned char *rv = NULL; + + switch (no) { + case arg_AL: + rv = (unsigned char *)®s->ax; + break; + case arg_BL: + rv = (unsigned char *)®s->bx; + break; + case arg_CL: + rv = (unsigned char *)®s->cx; + break; + case arg_DL: + rv = (unsigned char *)®s->dx; + break; + case arg_AH: + rv = 1 + (unsigned char *)®s->ax; + break; + case arg_BH: + rv = 1 + (unsigned char *)®s->bx; + break; + case arg_CH: + rv = 1 + (unsigned char *)®s->cx; + break; + case arg_DH: + rv = 1 + (unsigned char *)®s->dx; + break; +#ifdef __amd64__ + case arg_R8: + rv = (unsigned char *)®s->r8; + break; + case arg_R9: + rv = (unsigned char *)®s->r9; + break; + case arg_R10: + rv = (unsigned char *)®s->r10; + break; + case arg_R11: + rv = (unsigned char *)®s->r11; + break; + case arg_R12: + rv = (unsigned char *)®s->r12; + break; + case arg_R13: + rv = (unsigned char *)®s->r13; + break; + case arg_R14: + rv = (unsigned char *)®s->r14; + break; + case arg_R15: + rv = (unsigned char *)®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + break; + } + return rv; +} + +static unsigned long *get_reg_w32(int no, struct pt_regs *regs) +{ + unsigned long *rv = NULL; + + switch (no) { + case arg_AX: + rv = ®s->ax; + break; + case arg_BX: + rv = ®s->bx; + break; + case arg_CX: + rv = ®s->cx; + break; + case arg_DX: + rv = ®s->dx; + break; + case arg_SP: + rv = ®s->sp; + break; + case arg_BP: + rv = ®s->bp; + break; + case arg_SI: + rv = ®s->si; + break; + case arg_DI: + rv = ®s->di; + break; +#ifdef __amd64__ + case arg_R8: + rv = ®s->r8; + break; + case arg_R9: + rv = ®s->r9; + break; + case arg_R10: + rv = ®s->r10; + break; + case arg_R11: + rv = ®s->r11; + break; + case arg_R12: + rv = ®s->r12; + break; + case arg_R13: + rv = ®s->r13; + break; + case arg_R14: + rv = ®s->r14; + break; + case arg_R15: + rv = ®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + } + + return rv; +} + +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) +{ + unsigned int opcode; + unsigned char mod_rm; + int reg; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(reg_rop); i++) + if (reg_rop[i] == opcode) { + rv = REG_READ; + goto do_work; + } + + for (i = 0; i < ARRAY_SIZE(reg_wop); i++) + if (reg_wop[i] == opcode) { + rv = REG_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not a register instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + reg = ((mod_rm >> 3) & 0x7) | (rexr << 3); + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *get_reg_w8(reg, regs); + + case 2: + return *(unsigned short *)get_reg_w32(reg, regs); + + case 4: + return *(unsigned int *)get_reg_w32(reg, regs); + +#ifdef __amd64__ + case 8: + return *(unsigned long *)get_reg_w32(reg, regs); +#endif + + default: + printk(KERN_ERR "mmiotrace: Error width# %d\n", reg); + } + +err: + return 0; +} + +unsigned long get_ins_imm_val(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char mod_rm; + unsigned char mod; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(imm_wop); i++) + if (imm_wop[i] == opcode) { + rv = IMM_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + mod = mod_rm >> 6; + p++; + switch (mod) { + case 0: + /* if r/m is 5 we have a 32 disp (IA32 Manual 3, Table 2-2) */ + /* AMD64: XXX Check for address size prefix? */ + if ((mod_rm & 0x7) == 0x5) + p += 4; + break; + + case 1: + p += 1; + break; + + case 2: + p += 4; + break; + + case 3: + default: + printk(KERN_ERR "mmiotrace: not a memory access instruction " + "at 0x%lx, rm_mod=0x%02x\n", + ins_addr, mod_rm); + } + + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *(unsigned char *)p; + + case 2: + return *(unsigned short *)p; + + case 4: + return *(unsigned int *)p; + +#ifdef __amd64__ + case 8: + return *(unsigned long *)p; +#endif + + default: + printk(KERN_ERR "mmiotrace: Error: width.\n"); + } + +err: + return 0; +} diff --git a/arch/x86/mm/pf_in.h b/arch/x86/mm/pf_in.h new file mode 100644 index 000000000000..e05341a51a27 --- /dev/null +++ b/arch/x86/mm/pf_in.h @@ -0,0 +1,39 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +#ifndef __PF_H_ +#define __PF_H_ + +enum reason_type { + NOT_ME, /* page fault is not in regions */ + NOTHING, /* access others point in regions */ + REG_READ, /* read from addr to reg */ + REG_WRITE, /* write from reg to addr */ + IMM_WRITE, /* write from imm to addr */ + OTHERS /* Other instructions can not intercept */ +}; + +enum reason_type get_ins_type(unsigned long ins_addr); +unsigned int get_ins_mem_width(unsigned long ins_addr); +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs); +unsigned long get_ins_imm_val(unsigned long ins_addr); + +#endif /* __PF_H_ */ diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c new file mode 100644 index 000000000000..cfa60b227c8d --- /dev/null +++ b/arch/x86/mm/testmmiotrace.c @@ -0,0 +1,71 @@ +/* + * Written by Pekka Paalanen, 2008 + */ +#include +#include + +#define MODULE_NAME "testmmiotrace" + +static unsigned long mmio_address; +module_param(mmio_address, ulong, 0); +MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB."); + +static void do_write_test(void __iomem *p) +{ + unsigned int i; + for (i = 0; i < 256; i++) + iowrite8(i, p + i); + for (i = 1024; i < (5 * 1024); i += 2) + iowrite16(i * 12 + 7, p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + iowrite32(i * 212371 + 13, p + i); +} + +static void do_read_test(void __iomem *p) +{ + unsigned int i; + for (i = 0; i < 256; i++) + ioread8(p + i); + for (i = 1024; i < (5 * 1024); i += 2) + ioread16(p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + ioread32(p + i); +} + +static void do_test(void) +{ + void __iomem *p = ioremap_nocache(mmio_address, 0x4000); + if (!p) { + pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); + return; + } + do_write_test(p); + do_read_test(p); + iounmap(p); +} + +static int __init init(void) +{ + if (mmio_address == 0) { + pr_err(MODULE_NAME ": you have to use the module argument " + "mmio_address.\n"); + pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" + " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); + return -ENXIO; + } + + pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " + "in PCI address space, and writing " + "rubbish in there.\n", mmio_address); + do_test(); + return 0; +} + +static void __exit cleanup(void) +{ + pr_debug(MODULE_NAME ": unloaded.\n"); +} + +module_init(init); +module_exit(cleanup); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From e4b37ee68609037ffcaa2fcfae47cd31a605bb9e Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:59 +0200 Subject: x86 mmiotrace: remove ISA_trace parameter. This had become a no-op. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/mmio-mod.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 8256546d49bf..ab2bb776d310 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -81,17 +81,14 @@ static LIST_HEAD(trace_list); /* struct remap_trace */ /* module parameters */ static unsigned long filter_offset; static int nommiotrace; -static int ISA_trace; static int trace_pc; module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); -module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); -MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); static bool is_enabled(void) @@ -424,8 +421,6 @@ void enable_mmiotrace(void) if (nommiotrace) pr_info(NAME "MMIO tracing disabled.\n"); - if (ISA_trace) - pr_warning(NAME "Warning! low ISA range will be traced.\n"); spin_lock_irq(&trace_lock); atomic_inc(&mmiotrace_enabled); spin_unlock_irq(&trace_lock); -- cgit v1.2.1 From c6c67c1afcce71335b18ed8769b1165c468bfb03 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:59 +0200 Subject: mmiotrace: add user documentation Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 1d6de0d67f99..b28ace2be1a3 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -180,12 +180,10 @@ config MMIOTRACE help Mmiotrace traces Memory Mapped I/O access and is meant for debugging and reverse engineering. It is called from the ioremap - implementation and works via page faults. A user space program is - required to collect the MMIO data from debugfs files. - Tracing is disabled by default and can be enabled from a debugfs - file. + implementation and works via page faults. Tracing is disabled by + default and can be enabled run-time. - See http://nouveau.freedesktop.org/wiki/MmioTrace + See Documentation/tracers/mmiotrace.txt. If you are not helping to develop drivers, say N. config MMIOTRACE_TEST -- cgit v1.2.1 From 0663bb6cd9a457fbd8ca95c627bb762d07321a39 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 May 2008 21:20:59 +0200 Subject: mmiotrace: fix printk format Fix gcc printk format warnings: next-20080415/arch/x86/mm/mmio-mod.c: In function 'print_pte': next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'pteval_t' next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'pteval_t' next-20080415/arch/x86/mm/mmio-mod.c: At top level: next-20080415/arch/x86/mm/mmio-mod.c:403: warning: 'downed_cpus' defined but not used Signed-off-by: Randy Dunlap Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/mmio-mod.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index ab2bb776d310..6d6cac84c045 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -150,8 +150,9 @@ static void print_pte(unsigned long address) "0x%08lx\n", address); BUG(); } - pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), - pte_val(*pte) & _PAGE_PRESENT); + pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address, + (unsigned long long)pte_val(*pte), + (unsigned long long)pte_val(*pte) & _PAGE_PRESENT); } /* -- cgit v1.2.1 From 37b3619257d3190f47f233d7ed626d4b9916462c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 May 2008 21:20:59 +0200 Subject: x86/mmiotrace: uses/depends on PCI Don't try to build mmiotrace when CONFIG_PCI=n. next-20080416/kernel/trace/trace_mmiotrace.c: In function 'mmio_print_pcidev': next-20080416/kernel/trace/trace_mmiotrace.c:62: error: implicit declaration of function 'pci_dev_driver' Signed-off-by: Randy Dunlap Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index b28ace2be1a3..1e53df0ba08c 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -173,7 +173,7 @@ config MMIOTRACE_HOOKS config MMIOTRACE bool "Memory mapped IO tracing" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && PCI select TRACING select MMIOTRACE_HOOKS default y @@ -181,7 +181,7 @@ config MMIOTRACE Mmiotrace traces Memory Mapped I/O access and is meant for debugging and reverse engineering. It is called from the ioremap implementation and works via page faults. Tracing is disabled by - default and can be enabled run-time. + default and can be enabled at run-time. See Documentation/tracers/mmiotrace.txt. If you are not helping to develop drivers, say N. -- cgit v1.2.1 From 7423d1115f18627666d475fccc7c62394406ff8c Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:02 +0200 Subject: x86 mmiotrace: dynamically disable non-boot CPUs From 8979ee55cb6a429c4edd72ebec2244b849f6a79a Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Sat, 12 Apr 2008 00:18:57 +0300 Mmiotrace is not reliable with multiple CPUs and may miss events. Drop to single CPU when mmiotrace is activated. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/mmio-mod.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 6d6cac84c045..1f77d8532037 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -32,6 +32,7 @@ #include /* for ISA_START_ADDRESS */ #include #include +#include #include "pf_in.h" @@ -400,6 +401,64 @@ static void clear_trace_list(void) } } +#ifdef CONFIG_HOTPLUG_CPU +static cpumask_t downed_cpus; + +static void enter_uniprocessor(void) +{ + int cpu; + int err; + + get_online_cpus(); + downed_cpus = cpu_online_map; + cpu_clear(first_cpu(cpu_online_map), downed_cpus); + if (num_online_cpus() > 1) + pr_notice(NAME "Disabling non-boot CPUs...\n"); + put_online_cpus(); + + for_each_cpu_mask(cpu, downed_cpus) { + err = cpu_down(cpu); + if (!err) { + pr_info(NAME "CPU%d is down.\n", cpu); + } else { + pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err); + } + } + if (num_online_cpus() > 1) + pr_warning(NAME "multiple CPUs still online, " + "may miss events.\n"); +} + +static void leave_uniprocessor(void) +{ + int cpu; + int err; + + if (cpus_weight(downed_cpus) == 0) + return; + pr_notice(NAME "Re-enabling CPUs...\n"); + for_each_cpu_mask(cpu, downed_cpus) { + err = cpu_up(cpu); + if (!err) + pr_info(NAME "enabled CPU%d.\n", cpu); + else + pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err); + } +} + +#else /* !CONFIG_HOTPLUG_CPU */ +static void enter_uniprocessor(void) +{ + if (num_online_cpus() > 1) + pr_warning(NAME "multiple CPUs are online, may miss events. " + "Suggest booting with maxcpus=1 kernel argument.\n"); +} + +static void leave_uniprocessor(void) +{ +} +#endif + #if 0 /* XXX: out of order */ static struct file_operations fops_marker = { .owner = THIS_MODULE, @@ -422,6 +481,7 @@ void enable_mmiotrace(void) if (nommiotrace) pr_info(NAME "MMIO tracing disabled.\n"); + enter_uniprocessor(); spin_lock_irq(&trace_lock); atomic_inc(&mmiotrace_enabled); spin_unlock_irq(&trace_lock); @@ -442,6 +502,7 @@ void disable_mmiotrace(void) spin_unlock_irq(&trace_lock); clear_trace_list(); /* guarantees: no more kmmio callbacks */ + leave_uniprocessor(); if (marker_file) { debugfs_remove(marker_file); marker_file = NULL; -- cgit v1.2.1 From 970e6fa03885f32cc43e42cb08c73a5f54cd8bd9 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: mmiotrace: code style cleanups From c2da03771e29159627c5c7b9509ec70bce9f91ee Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 28 Apr 2008 21:25:22 +0300 Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 4 ++-- arch/x86/mm/mmio-mod.c | 7 +++---- arch/x86/mm/testmmiotrace.c | 2 +- 3 files changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 3ad27b8504a5..6a92d9111b64 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -17,10 +17,10 @@ #include #include #include -#include +#include #include #include -#include +#include #include #include diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 1f77d8532037..a8d2a0019da4 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include #include @@ -418,11 +418,10 @@ static void enter_uniprocessor(void) for_each_cpu_mask(cpu, downed_cpus) { err = cpu_down(cpu); - if (!err) { + if (!err) pr_info(NAME "CPU%d is down.\n", cpu); - } else { + else pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err); - } } if (num_online_cpus() > 1) pr_warning(NAME "multiple CPUs still online, " diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c index cfa60b227c8d..d877c5b423ef 100644 --- a/arch/x86/mm/testmmiotrace.c +++ b/arch/x86/mm/testmmiotrace.c @@ -2,7 +2,7 @@ * Written by Pekka Paalanen, 2008 */ #include -#include +#include #define MODULE_NAME "testmmiotrace" -- cgit v1.2.1 From 87e547fe41a8b57d6d80afc67a0031fbe477eb0d Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: x86 mmiotrace: fix page-unaligned ioremaps mmiotrace_ioremap() expects to receive the original unaligned map phys address and size. Also fix {un,}register_kmmio_probe() to deal properly with unaligned size. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 4 +++- arch/x86/mm/kmmio.c | 13 +++++++++++-- arch/x86/mm/mmio-mod.c | 1 + 3 files changed, 15 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 8927c878544d..a7c80a6e8622 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -123,6 +123,8 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, { unsigned long pfn, offset, vaddr; resource_size_t last_addr; + const resource_size_t unaligned_phys_addr = phys_addr; + const unsigned long unaligned_size = size; struct vm_struct *area; unsigned long new_prot_val; pgprot_t prot; @@ -236,7 +238,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, } ret_addr = (void __iomem *) (vaddr + offset); - mmiotrace_ioremap(phys_addr, size, ret_addr); + mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr); return ret_addr; } diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 6a92d9111b64..93b1797666cb 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -351,11 +351,19 @@ static void release_kmmio_fault_page(unsigned long page, } } +/* + * With page-unaligned ioremaps, one or two armed pages may contain + * addresses from outside the intended mapping. Events for these addresses + * are currently silently dropped. The events may result only from programming + * mistakes by accessing addresses before the beginning or past the end of a + * mapping. + */ int register_kmmio_probe(struct kmmio_probe *p) { unsigned long flags; int ret = 0; unsigned long size = 0; + const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); spin_lock_irqsave(&kmmio_lock, flags); if (get_kmmio_probe(p->addr)) { @@ -364,7 +372,7 @@ int register_kmmio_probe(struct kmmio_probe *p) } kmmio_count++; list_add_rcu(&p->list, &kmmio_probes); - while (size < p->len) { + while (size < size_lim) { if (add_kmmio_fault_page(p->addr + size)) pr_err("kmmio: Unable to set page fault.\n"); size += PAGE_SIZE; @@ -436,11 +444,12 @@ void unregister_kmmio_probe(struct kmmio_probe *p) { unsigned long flags; unsigned long size = 0; + const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); struct kmmio_fault_page *release_list = NULL; struct kmmio_delayed_release *drelease; spin_lock_irqsave(&kmmio_lock, flags); - while (size < p->len) { + while (size < size_lim) { release_kmmio_fault_page(p->addr + size, &release_list); size += PAGE_SIZE; } diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index a8d2a0019da4..278998c1998f 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -280,6 +280,7 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, { static atomic_t next_id; struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); + /* These are page-unaligned. */ struct mmiotrace_map map = { .phys = offset, .virt = (unsigned long)addr, -- cgit v1.2.1 From dee310d0adf41019aca476052ac3085ff286d9be Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: x86 mmiotrace: use resource_size_t for phys addresses Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/mmio-mod.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 278998c1998f..3b04a0126121 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -48,7 +48,7 @@ struct trap_reason { struct remap_trace { struct list_head list; struct kmmio_probe probe; - unsigned long phys; + resource_size_t phys; unsigned long id; }; @@ -275,7 +275,7 @@ static void post(struct kmmio_probe *p, unsigned long condition, put_cpu_var(pf_reason); } -static void ioremap_trace_core(unsigned long offset, unsigned long size, +static void ioremap_trace_core(resource_size_t offset, unsigned long size, void __iomem *addr) { static atomic_t next_id; @@ -319,13 +319,14 @@ not_enabled: spin_unlock_irq(&trace_lock); } -void -mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) +void mmiotrace_ioremap(resource_size_t offset, unsigned long size, + void __iomem *addr) { if (!is_enabled()) /* recheck and proper locking in *_core() */ return; - pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); + pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n", + (unsigned long long)offset, size, addr); if ((filter_offset) && (offset != filter_offset)) return; ioremap_trace_core(offset, size, addr); -- cgit v1.2.1 From a50445d76c22a34ae149704ea5adaef171c8acb7 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: mmiotrace: rename kmmio_probe::user_data to :private. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/mmio-mod.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 3b04a0126121..ed0e0e90b3ef 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -191,7 +191,7 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); const unsigned long instptr = instruction_pointer(regs); const enum reason_type type = get_ins_type(instptr); - struct remap_trace *trace = p->user_data; + struct remap_trace *trace = p->private; /* it doesn't make sense to have more than one active trace per cpu */ if (my_reason->active_traces) @@ -299,7 +299,7 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size, .len = size, .pre_handler = pre, .post_handler = post, - .user_data = trace + .private = trace }, .phys = offset, .id = atomic_inc_return(&next_id) -- cgit v1.2.1 From 790e2a290b499b0400254e6870ec27969065d122 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:14 +0200 Subject: x86 mmiotrace: page level is unsigned Fixes some sparse warnings. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 13 +++++++------ arch/x86/mm/mmio-mod.c | 2 +- 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 93b1797666cb..b65871e6bba6 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -104,11 +104,12 @@ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) return NULL; } -static void set_page_present(unsigned long addr, bool present, int *pglevel) +static void set_page_present(unsigned long addr, bool present, + unsigned int *pglevel) { pteval_t pteval; pmdval_t pmdval; - int level; + unsigned int level; pmd_t *pmd; pte_t *pte = lookup_address(addr, &level); @@ -145,15 +146,15 @@ static void set_page_present(unsigned long addr, bool present, int *pglevel) } /** Mark the given page as not present. Access to it will trigger a fault. */ -static void arm_kmmio_fault_page(unsigned long page, int *page_level) +static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel) { - set_page_present(page & PAGE_MASK, false, page_level); + set_page_present(page & PAGE_MASK, false, pglevel); } /** Mark the given page as present. */ -static void disarm_kmmio_fault_page(unsigned long page, int *page_level) +static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel) { - set_page_present(page & PAGE_MASK, true, page_level); + set_page_present(page & PAGE_MASK, true, pglevel); } /* diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index ed0e0e90b3ef..e7397e108beb 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -137,7 +137,7 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, static void print_pte(unsigned long address) { - int level; + unsigned int level; pte_t *pte = lookup_address(address, &level); if (!pte) { -- cgit v1.2.1 From 40bd21740012132afb62d78ac3e6b82372b2fbc2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:44:02 +0200 Subject: x86: automatical unification of i8259.c Make conversion of i8259 very mechanical -- i8259 was generated by --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259.c | 368 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/i8259_32.c | 295 ------------------------------------ arch/x86/kernel/i8259_64.c | 309 ------------------------------------- 4 files changed, 369 insertions(+), 605 deletions(-) create mode 100644 arch/x86/kernel/i8259.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..f71a76ef2596 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c new file mode 100644 index 000000000000..2decba6b0101 --- /dev/null +++ b/arch/x86/kernel/i8259.c @@ -0,0 +1,368 @@ +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#else /* CONFIG_X86_64 */ +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#endif /* ! CONFIG_X86_64 */ +#include + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { +#ifndef CONFIG_X86_64 + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); +#else /* CONFIG_X86_64 */ + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); +#endif /* CONFIG_X86_64 */ + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + .name = "i8259", + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_pic - this has to work on a wide range of PC hardware. + */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ + if (auto_eoi) /* master does Auto EOI */ + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index fe631967d625..d66914287ee1 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -21,302 +21,7 @@ #include #include -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index fa57a1568508..a95d2bd27e9d 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -87,315 +87,6 @@ static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = #undef IRQ #undef IRQLIST_16 -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -- cgit v1.2.1 From 6b4d3afbe722ee71b8da346c2c4393938440c471 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:47:24 +0200 Subject: x86: i8259.c: remove #ifdefs around includes Remove #ifdefs around includes; including too much should be always safe. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 2decba6b0101..8b7eb0cb2e7e 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -1,14 +1,10 @@ -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include @@ -16,24 +12,17 @@ #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include -#ifndef CONFIG_X86_64 #include -#else /* CONFIG_X86_64 */ #include -#endif /* CONFIG_X86_64 */ #include #include #include #include -#ifndef CONFIG_X86_64 #include -#endif /* ! CONFIG_X86_64 */ #include /* -- cgit v1.2.1 From 4f6f3bac18c80ff6cf072d90796755c69cc4c748 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:52:52 +0200 Subject: x86: i8259.c: remove trivial ifdefs Remove #ifdefs where the only difference is formatting of comments. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 8b7eb0cb2e7e..433e49edfd4f 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -175,24 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ -#else /* CONFIG_X86_64 */ /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); + outb(0x60+(irq&7), PIC_SLAVE_CMD); /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ -#else /* CONFIG_X86_64 */ - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -215,12 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { -#ifndef CONFIG_X86_64 - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#else /* CONFIG_X86_64 */ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#endif /* CONFIG_X86_64 */ spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); -- cgit v1.2.1 From 4d9a6e6128dd8ada0d2feed2a9bb6506043e4655 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:57:52 +0200 Subject: x86: i8259: cleanup codingstyle Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 433e49edfd4f..7a0fda8f01b5 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -129,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } -- cgit v1.2.1 From f20b11e716936f85850654c49e06a1f955b9e5fc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 15:59:58 +0200 Subject: x86: rename the i8259_32/64.c leftovers to initirq_32/64.c The leftovers of the i8259 unification have nothing to do with i8259 at all. They contain interrupt init code and the i8259_xx name is just misleading now. Rename them to initirq_32/64.c Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259_32.c | 114 ------------------------ arch/x86/kernel/i8259_64.c | 203 ------------------------------------------- arch/x86/kernel/irqinit_32.c | 114 ++++++++++++++++++++++++ arch/x86/kernel/irqinit_64.c | 203 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 318 insertions(+), 318 deletions(-) delete mode 100644 arch/x86/kernel/i8259_32.c delete mode 100644 arch/x86/kernel/i8259_64.c create mode 100644 arch/x86/kernel/irqinit_32.c create mode 100644 arch/x86/kernel/irqinit_64.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f71a76ef2596..2a53ad2cb450 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c deleted file mode 100644 index d66914287ee1..000000000000 --- a/arch/x86/kernel/i8259_32.c +++ /dev/null @@ -1,114 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index a95d2bd27e9d..000000000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,203 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 000000000000..d66914287ee1 --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,114 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 000000000000..a95d2bd27e9d --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,203 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} -- cgit v1.2.1 From fce39665abb71d01d74ac74eb13dd69a799dfc2f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: make init_ISA_irqs() static Moved to i8259 branch to avoid conflicts. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index a95d2bd27e9d..64bc0f14285f 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -120,7 +120,7 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 }; -void __init init_ISA_irqs (void) +static void __init init_ISA_irqs (void) { int i; -- cgit v1.2.1 From 21fd5132b223a10bdf17713dd0bf321cbd6471d2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:44:02 +0200 Subject: x86: automatical unification of i8259.c Make conversion of i8259 very mechanical -- i8259 was generated by diff -D, with too different parts left in i8259_32 and i8259_64.c. Only "by hand" changes were removal of #ifdef from middle of the comment (prevented compilation) and removal of one static to allow splitting into files. Of course, it will need some cleanups now, and those will follow. Signed-of-by: Pavel Machek --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259.c | 368 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/i8259_32.c | 295 ------------------------------------ arch/x86/kernel/i8259_64.c | 309 ------------------------------------- 4 files changed, 369 insertions(+), 605 deletions(-) create mode 100644 arch/x86/kernel/i8259.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..f71a76ef2596 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c new file mode 100644 index 000000000000..2decba6b0101 --- /dev/null +++ b/arch/x86/kernel/i8259.c @@ -0,0 +1,368 @@ +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#else /* CONFIG_X86_64 */ +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#endif /* ! CONFIG_X86_64 */ +#include + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { +#ifndef CONFIG_X86_64 + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); +#else /* CONFIG_X86_64 */ + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); +#endif /* CONFIG_X86_64 */ + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + .name = "i8259", + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_pic - this has to work on a wide range of PC hardware. + */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ + if (auto_eoi) /* master does Auto EOI */ + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index fe631967d625..d66914287ee1 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -21,302 +21,7 @@ #include #include -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 1870e0e86559..b44095efcf83 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -101,315 +101,6 @@ static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = #undef IRQ #undef IRQLIST_16 -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -- cgit v1.2.1 From 15d613cb25efd978dd55592d011a6ffc487b3432 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:47:24 +0200 Subject: x86: i8259.c: remove #ifdefs around includes Remove #ifdefs around includes; including too much should be always safe. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 2decba6b0101..8b7eb0cb2e7e 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -1,14 +1,10 @@ -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include @@ -16,24 +12,17 @@ #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include -#ifndef CONFIG_X86_64 #include -#else /* CONFIG_X86_64 */ #include -#endif /* CONFIG_X86_64 */ #include #include #include #include -#ifndef CONFIG_X86_64 #include -#endif /* ! CONFIG_X86_64 */ #include /* -- cgit v1.2.1 From 3e8631d27088f394b6788829e238a60bf07d47ab Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:52:52 +0200 Subject: x86: i8259.c: remove trivial ifdefs Remove #ifdefs where the only difference is formatting of comments. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 8b7eb0cb2e7e..433e49edfd4f 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -175,24 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ -#else /* CONFIG_X86_64 */ /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); + outb(0x60+(irq&7), PIC_SLAVE_CMD); /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ -#else /* CONFIG_X86_64 */ - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -215,12 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { -#ifndef CONFIG_X86_64 - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#else /* CONFIG_X86_64 */ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#endif /* CONFIG_X86_64 */ spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); -- cgit v1.2.1 From 680afbf989d697b9ba1382017a73c8cfa53b3f89 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:57:52 +0200 Subject: x86: i8259: cleanup codingstyle Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 433e49edfd4f..7a0fda8f01b5 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -129,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } -- cgit v1.2.1 From d23b200a75f78e62744c3c25d078855eec8a689b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: make init_ISA_irqs() static Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index b44095efcf83..31f49e8f46a7 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -134,7 +134,7 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 }; -void __init init_ISA_irqs (void) +static void __init init_ISA_irqs (void) { int i; -- cgit v1.2.1 From ec42418f1973e1f77da1fcca3be59c0acb878a9d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 15:59:58 +0200 Subject: x86: rename the i8259_32/64.c leftovers to irqinit_32/64.c The leftovers of the i8259 unification have nothing to do with i8259 at all. They contain interrupt init code and the i8259_xx name is just misleading now. Rename them to irqinit_32/64.c Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259_32.c | 114 ----------------------- arch/x86/kernel/i8259_64.c | 217 ------------------------------------------- arch/x86/kernel/irqinit_32.c | 114 +++++++++++++++++++++++ arch/x86/kernel/irqinit_64.c | 217 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 332 insertions(+), 332 deletions(-) delete mode 100644 arch/x86/kernel/i8259_32.c delete mode 100644 arch/x86/kernel/i8259_64.c create mode 100644 arch/x86/kernel/irqinit_32.c create mode 100644 arch/x86/kernel/irqinit_64.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f71a76ef2596..2a53ad2cb450 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c deleted file mode 100644 index d66914287ee1..000000000000 --- a/arch/x86/kernel/i8259_32.c +++ /dev/null @@ -1,114 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index 31f49e8f46a7..000000000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,217 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define IRQ_NAME2(nr) nr##_interrupt(void) -#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) - -/* - * SMP has a few special interrupts for IPI messages - */ - -#define BUILD_IRQ(nr) \ - asmlinkage void IRQ_NAME(nr); \ - asm("\n.p2align\n" \ - "IRQ" #nr "_interrupt:\n\t" \ - "push $~(" #nr ") ; " \ - "jmp common_interrupt"); - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -static void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 000000000000..d66914287ee1 --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,114 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 000000000000..31f49e8f46a7 --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,217 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +/* + * SMP has a few special interrupts for IPI messages + */ + +#define BUILD_IRQ(nr) \ + asmlinkage void IRQ_NAME(nr); \ + asm("\n.p2align\n" \ + "IRQ" #nr "_interrupt:\n\t" \ + "push $~(" #nr ") ; " \ + "jmp common_interrupt"); + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +static void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} -- cgit v1.2.1 From 6360b1fbb4a939efd34fc770c2ebd927c55506e0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: move BUG_TABLE into RODATA Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/avr32/kernel/vmlinux.lds.S | 2 -- arch/parisc/kernel/vmlinux.lds.S | 1 - arch/powerpc/kernel/vmlinux.lds.S | 2 -- arch/s390/kernel/vmlinux.lds.S | 1 - arch/sh/kernel/vmlinux_32.lds.S | 1 - arch/sh/kernel/vmlinux_64.lds.S | 1 - arch/x86/kernel/vmlinux_32.lds.S | 8 +++----- arch/x86/kernel/vmlinux_64.lds.S | 10 ++++------ 8 files changed, 7 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index 481cfd40c053..bc932c9b4272 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -93,8 +93,6 @@ SECTIONS __stop___ex_table = .; } - BUG_TABLE - RODATA . = ALIGN(THREAD_SIZE); diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 50b4a3a25d0a..ff7d4ff4675a 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -66,7 +66,6 @@ SECTIONS _etext = .; RODATA - BUG_TABLE /* writeable */ /* Make sure this is page aligned so diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 0c3000bf8d75..53d57d17a894 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -64,8 +64,6 @@ SECTIONS NOTES - BUG_TABLE - /* * Init sections discarded at runtime */ diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index b4607155e8d0..76c1e60c92f3 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -40,7 +40,6 @@ SECTIONS _etext = .; /* End of text section */ NOTES :text :note - BUG_TABLE :text RODATA diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index c7113786ecd4..7b4b82bd1156 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -44,7 +44,6 @@ SECTIONS _etext = .; /* End of text section */ - BUG_TABLE NOTES RO_DATA(PAGE_SIZE) diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S index d1e177009a41..33fa46451406 100644 --- a/arch/sh/kernel/vmlinux_64.lds.S +++ b/arch/sh/kernel/vmlinux_64.lds.S @@ -65,7 +65,6 @@ SECTIONS _etext = .; /* End of text section */ - BUG_TABLE NOTES RO_DATA(PAGE_SIZE) diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e9..aa0855471c79 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -49,16 +49,14 @@ SECTIONS _etext = .; /* End of text section */ } :text = 0x9090 + NOTES :text :note + . = ALIGN(16); /* Exception table */ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; - } - - NOTES :text :note - - BUG_TABLE :text + } :text = 0x9090 . = ALIGN(4); .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a5..d123747af1e4 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -19,7 +19,7 @@ PHDRS { data PT_LOAD FLAGS(7); /* RWE */ user PT_LOAD FLAGS(7); /* RWE */ data.init PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(4); /* R__ */ + note PT_NOTE FLAGS(0); /* ___ */ } SECTIONS { @@ -40,16 +40,14 @@ SECTIONS _etext = .; /* End of text section */ } :text = 0x9090 + NOTES :text :note + . = ALIGN(16); /* Exception table */ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; - } - - NOTES :text :note - - BUG_TABLE :text + } :text = 0x9090 RODATA -- cgit v1.2.1 From 63687a528c39a67c1a213cdffa09feb0e6af9dbe Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: x86: move tracedata to RODATA .. allowing it to be write-protected just as other read-only data under CONFIG_DEBUG_RODATA. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/vmlinux_32.lds.S | 7 ------- arch/x86/kernel/vmlinux_64.lds.S | 7 ------- 2 files changed, 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e9..2674f5796275 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -60,13 +60,6 @@ SECTIONS BUG_TABLE :text - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - RODATA /* writeable */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a5..687041bfbae5 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -53,13 +53,6 @@ SECTIONS RODATA - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { -- cgit v1.2.1 From a2eddfa95919a730e0e5ed17e9c303fe5ba249cd Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: x86: make /proc/stat account for all interrupts LAPIC interrupts, which don't go through the generic interrupt handling code, aren't accounted for in /proc/stat. Hence this patch adds a mechanism architectures can use to accordingly adjust the statistics. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/irq_32.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irq_64.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b9..468acd04aa2e 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -313,16 +313,20 @@ skip: per_cpu(irq_stat,j).irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); +#endif +#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); @@ -331,6 +335,40 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = nmi_count(cpu); + +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).apic_timer_irqs; +#endif +#ifdef CONFIG_SMP + sum += per_cpu(irq_stat, cpu).irq_resched_count; + sum += per_cpu(irq_stat, cpu).irq_call_count; + sum += per_cpu(irq_stat, cpu).irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += per_cpu(irq_stat, cpu).irq_thermal_count; +#endif +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).irq_spurious_count; +#endif + return sum; +} + +u64 arch_irq_stat(void) +{ + u64 sum = atomic_read(&irq_err_count); + +#ifdef CONFIG_X86_IO_APIC + sum += atomic_read(&irq_mis_count); +#endif + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU #include diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 3aac15466a91..1f78b238d8d2 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -135,6 +135,7 @@ skip: seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count); @@ -143,6 +144,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); +#endif seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count); @@ -152,6 +154,32 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = cpu_pda(cpu)->__nmi_count; + + sum += cpu_pda(cpu)->apic_timer_irqs; +#ifdef CONFIG_SMP + sum += cpu_pda(cpu)->irq_resched_count; + sum += cpu_pda(cpu)->irq_call_count; + sum += cpu_pda(cpu)->irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += cpu_pda(cpu)->irq_thermal_count; + sum += cpu_pda(cpu)->irq_threshold_count; +#endif + sum += cpu_pda(cpu)->irq_spurious_count; + return sum; +} + +u64 arch_irq_stat(void) +{ + return atomic_read(&irq_err_count); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific -- cgit v1.2.1 From c2c14fb7afcc67b48724571506e095fccc65a670 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: tsc_64.c make constant UL arch/x86/kernel/tsc_64.c:245:13: warning: constant 0x100000000 is so big it is long Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index fcc16e58609e..c19b0e273ef1 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -242,7 +242,7 @@ void __init tsc_calibrate(void) if (hpet) { printk(KERN_INFO "TSC calibrated against HPET\n"); if (hpet2 < hpet1) - hpet2 += 0x100000000; + hpet2 += 0x100000000UL; hpet2 -= hpet1; tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; } else { -- cgit v1.2.1 From e6b0edef3453677b13e175a104a83eb36d062dd3 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: clean up vdso_enabled type on x86_64 This fixes type of "vdso_enabled" on X86_64 to match extern in asm/elf.h. Signed-off-by: OGAWA Hirofumi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/vdso/vma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 3fdd51497a83..19a6cfaf5db9 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -16,7 +16,7 @@ #include "vextern.h" /* Just for VMAGIC. */ #undef VEXTERN -int vdso_enabled = 1; +unsigned int __read_mostly vdso_enabled = 1; extern char vdso_start[], vdso_end[]; extern unsigned short vdso_sync_cpuid; -- cgit v1.2.1 From 46dd98a5c0b907f94742579ab605be1933a37abd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:10:39 -0700 Subject: arch/x86/mm/pat.c: use boot_cpu_has() arch/x86/mm/pat.c: In function 'phys_mem_access_prot_allowed': arch/x86/mm/pat.c:526: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:526: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:527: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:527: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:528: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:528: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:529: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:529: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type Don't open-code test_bit() on a __u32 Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/mm/pat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index a1cbea0b79b1..e83b770676d5 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -536,10 +536,10 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, * we maintain the tradition of paranoia in this code. */ if (!pat_wc_enabled && - ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) && + ! ( boot_cpu_has(X86_FEATURE_MTRR) || + boot_cpu_has(X86_FEATURE_K6_MTRR) || + boot_cpu_has(X86_FEATURE_CYRIX_ARR) || + boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) && (pfn << PAGE_SHIFT) >= __pa(high_memory)) { flags = _PAGE_CACHE_UC; } -- cgit v1.2.1 From eef8f871d84b5df1a24902a4e4700188be1aff2c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:34 +0200 Subject: x86: vsmp_64 add missing includes sparse mutters: arch/x86/kernel/vsmp_64.c:126:5: warning: symbol 'is_vsmp_box' was not declared. Should it be static? arch/x86/kernel/vsmp_64.c:145:13: warning: symbol 'vsmp_init' was not declared. Should it be static? Include the appropriate headers. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/vsmp_64.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index ba8c0b75ab0a..0c029e8959c7 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,9 +15,12 @@ #include #include #include + +#include #include #include #include +#include #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* -- cgit v1.2.1 From 535694f361419ca195fd915dd5038c926334e1be Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: boot/printfc use NULL instead 0 Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/boot/printf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c index c1d00c0274c4..50e47cdbdddd 100644 --- a/arch/x86/boot/printf.c +++ b/arch/x86/boot/printf.c @@ -56,7 +56,7 @@ static char *number(char *str, long num, int base, int size, int precision, if (type & LEFT) type &= ~ZEROPAD; if (base < 2 || base > 36) - return 0; + return NULL; c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { -- cgit v1.2.1 From 0eafe234a2571f51ef9f7e8baddb58c828750771 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: k8topology add missing header k8_scan_nodes is global and needs a prototype. Add the header file which contains it. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 1f476e477844..48471199887d 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -22,6 +22,7 @@ #include #include #include +#include static __init int find_northbridge(void) { -- cgit v1.2.1 From d34c08958fa36c7a8c3f8d9c0ebe6ec1ab744a68 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: k8topology fix shadow variable sparse mutters: arch/x86/mm/k8topology_64.c:108:7: warning: symbol 'nodeid' shadows an earlier one Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 48471199887d..36c6c4a91353 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -76,10 +76,10 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) { unsigned long prevbase; struct bootnode nodes[8]; - int nodeid, i, nb; + int i, nb; unsigned char nodeids[8]; int found = 0; - u32 reg; + u32 nodeid, reg; unsigned numnodes; unsigned cores; unsigned bits; @@ -106,7 +106,6 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) prevbase = 0; for (i = 0; i < 8; i++) { unsigned long base, limit; - u32 nodeid; base = read_pci_config(0, nb, 1, 0x40 + i*8); limit = read_pci_config(0, nb, 1, 0x44 + i*8); -- cgit v1.2.1 From 55d4f22abc9f011c5db982f83377cdd38bb9a2a3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: k8topology cleanup variable declarations Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 36c6c4a91353..0ea66b532c35 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -74,17 +74,12 @@ static __init void early_get_boot_cpu_id(void) int __init k8_scan_nodes(unsigned long start, unsigned long end) { + unsigned numnodes, cores, bits, apicid_base; unsigned long prevbase; struct bootnode nodes[8]; - int i, nb; unsigned char nodeids[8]; - int found = 0; + int i, j, nb, found = 0; u32 nodeid, reg; - unsigned numnodes; - unsigned cores; - unsigned bits; - int j; - unsigned apicid_base; if (!early_pci_allowed()) return -1; -- cgit v1.2.1 From d1097635deed7196c2a859f285c29267779ca45a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:42:01 +0200 Subject: x86: move mmconfig declarations to header arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and the inline stubs to the appropriate header file. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/mmconf-fam10h_64.c | 1 + arch/x86/kernel/setup_64.c | 13 +------------ 2 files changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c0..fdfdc550b366 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../pci/pci.h" diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..341230db74e1 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #ifdef CONFIG_PARAVIRT @@ -293,18 +294,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * -- cgit v1.2.1 From 11034d55975be6d8b955a6eb11e87fc67ec086c2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: init64.c include initrd.h free_initrd_mem needs a prototype, which is in linux/initrd.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/init_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..18123096cdb9 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From e0b32d768cad17af07af3aced67498bde98296c9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: make command_line static in setup_64.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 341230db74e1..78c1be69c6d3 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -119,7 +119,7 @@ EXPORT_SYMBOL_GPL(edid_info); extern int root_mountflags; -char __initdata command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static struct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, -- cgit v1.2.1 From 968cbfad1a727b5689ae620f4d970abf6ce73340 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: make __pci_mmcfg_init static in mmconfig-shared.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/pci/mmconfig-shared.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 0cfebecf2a8f..23faaa890ffc 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -374,7 +374,7 @@ reject: static int __initdata known_bridge; -void __init __pci_mmcfg_init(int early) +static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ if ((pci_probe & PCI_PROBE_MMCONF) == 0) -- cgit v1.2.1 From 311f83494830fec17f086401a5b43984bb447cd2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: kernel/pci-dma.c cleanups This patch contains the following cleanups: - make the following needlessly global code static: - dma_alloc_pages() Signed-off-by: Adrian Bunk Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index c5ef1af8e79d..5bc29ca4196e 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -357,7 +357,7 @@ int dma_supported(struct device *dev, u64 mask) EXPORT_SYMBOL(dma_supported); /* Allocate DMA memory on node near device */ -noinline struct page * +static noinline struct page * dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { int node; -- cgit v1.2.1 From 6a1673ae2201931ce34bf7ba9f90928c864d8334 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: make memory_add_physaddr_to_nid depend on MEMORY_HOTPLUG memory_add_physaddr_to_nid() is only used in the CONFIG_MEMORY_HOTPLUG_SPARSE || CONFIG_ACPI_HOTPLUG_MEMORY case. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 3890234e5b26..f6d0584cbf38 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -522,6 +522,7 @@ int __node_distance(int a, int b) EXPORT_SYMBOL(__node_distance); +#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) int memory_add_physaddr_to_nid(u64 start) { int i, ret = 0; @@ -533,4 +534,4 @@ int memory_add_physaddr_to_nid(u64 start) return ret; } EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); - +#endif -- cgit v1.2.1 From 4e50e62ce52f39b5f45e82f68b18254458b429bb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: eliminate duplicate consistency checks in init_32.c Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/init_32.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index ec30d10154b6..4834c0fcb6b7 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -571,17 +571,6 @@ void __init mem_init(void) #endif bad_ppro = ppro_with_ram_bug(); -#ifdef CONFIG_HIGHMEM - /* check that fixmap and pkmap do not overlap */ - if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) { - printk(KERN_ERR - "fixmap and kmap areas overlap - this will crash\n"); - printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n", - PKMAP_BASE, PKMAP_BASE + LAST_PKMAP*PAGE_SIZE, - FIXADDR_START); - BUG(); - } -#endif /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem(); @@ -614,7 +603,6 @@ void __init mem_init(void) (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) ); -#if 1 /* double-sanity-check paranoia */ printk(KERN_INFO "virtual kernel memory layout:\n" " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" #ifdef CONFIG_HIGHMEM @@ -655,7 +643,6 @@ void __init mem_init(void) #endif BUG_ON(VMALLOC_START > VMALLOC_END); BUG_ON((unsigned long)high_memory > VMALLOC_START); -#endif /* double-sanity-check paranoia */ if (boot_cpu_data.wp_works_ok < 0) test_wp_bit(); -- cgit v1.2.1 From ebdd561a19d7917ac49fff9c355aa4833c504bf1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: constify data in reboot.c Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/reboot.c | 18 +++++++++--------- arch/x86/kernel/reboot_fixups_32.c | 4 ++-- 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f6be7d5f82f8..f8a62160e151 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -27,7 +27,7 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -static long no_idt[3]; +static const struct desc_ptr no_idt = {}; static int reboot_mode; enum reboot_type reboot_type = BOOT_KBD; int reboot_force; @@ -201,15 +201,15 @@ core_initcall(reboot_init); controller to pulse the CPU reset line, which is more thorough, but doesn't work with at least one type of 486 motherboard. It is easy to stop this code working; hence the copious comments. */ -static unsigned long long +static const unsigned long long real_mode_gdt_entries [3] = { 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ + 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct desc_ptr +static const struct desc_ptr real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, real_mode_idt = { 0x3ff, 0 }; @@ -231,7 +231,7 @@ real_mode_idt = { 0x3ff, 0 }; More could be done here to set up the registers as if a CPU reset had occurred; hopefully real BIOSs don't assume much. */ -static unsigned char real_mode_switch [] = +static const unsigned char real_mode_switch [] = { 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ @@ -245,7 +245,7 @@ static unsigned char real_mode_switch [] = 0x24, 0x10, /* f: andb $0x10,al */ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ }; -static unsigned char jump_to_bios [] = +static const unsigned char jump_to_bios [] = { 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ }; @@ -255,7 +255,7 @@ static unsigned char jump_to_bios [] = * specified by the code and length parameters. * We assume that length will aways be less that 100! */ -void machine_real_restart(unsigned char *code, int length) +void machine_real_restart(const unsigned char *code, int length) { local_irq_disable(); @@ -368,7 +368,7 @@ static void native_machine_emergency_restart(void) } case BOOT_TRIPLE: - load_idt((const struct desc_ptr *)&no_idt); + load_idt(&no_idt); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index dec0b5ec25c2..61a837743fe5 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -49,7 +49,7 @@ struct device_fixup { void (*reboot_fixup)(struct pci_dev *); }; -static struct device_fixup fixups_table[] = { +static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, @@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = { */ void mach_reboot_fixups(void) { - struct device_fixup *cur; + const struct device_fixup *cur; struct pci_dev *dev; int i; -- cgit v1.2.1 From 369101da7e3f6f971b7303922d2978b8483241c6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o patched md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov Acked-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 10a1955bb1d1..2f59ca8bd16c 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -18,6 +18,7 @@ #include #include #include +#include #ifdef CONFIG_PARAVIRT #include @@ -184,14 +185,10 @@ ENTRY(secondary_startup_64) 1: wrmsr /* Make changes effective */ /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax +#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ + X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ + X86_CR0_PG) + movl $CR0_STATE, %eax /* Make changes effective */ movq %rax, %cr0 -- cgit v1.2.1 From e83e31f41a623262714d9c56dde7dfc51ac078f7 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:39 +0200 Subject: x86: compressed/head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 129f24be6df396fb7d8bf998c01fc716 arch/x86/boot/compressed/head_64.o text data bss dec hex filename 705 48 45056 45809 b2f1 arch/x86/boot/compressed/head_64.o patched md5sum: 129f24be6df396fb7d8bf998c01fc716 arch/x86/boot/compressed/head_64-new.o text data bss dec hex filename 705 48 45056 45809 b2f1 arch/x86/boot/compressed/head_64-new.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov Acked-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/head_64.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index d8819efac81d..1d5dff4123e1 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -30,6 +30,7 @@ #include #include #include +#include #include .section ".text.head" @@ -109,7 +110,7 @@ startup_32: /* Enable PAE mode */ xorl %eax, %eax - orl $(1 << 5), %eax + orl $(X86_CR4_PAE), %eax movl %eax, %cr4 /* @@ -170,7 +171,7 @@ startup_32: pushl %eax /* Enter paged protected Mode, activating Long Mode */ - movl $0x80000001, %eax /* Enable Paging and Protected mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ movl %eax, %cr0 /* Jump from 32bit compatibility mode into 64bit mode. */ -- cgit v1.2.1 From 2cc74111c78dbc7b26c41b4e87cfebfc3aed49c4 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 11 May 2008 19:35:54 +0800 Subject: x86: ipi.c: removed duplicated include Removed duplicated include in arch/x86/kernel/ipi.c. Signed-off-by: Huang Weiyi Cc: mingo@redhat.com Cc: hpa@zytor.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ipi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index c0df7b89ca23..9d98cda39ad9 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include -- cgit v1.2.1 From 883b7af932b4435eb4798cfa4fec0848639c2a87 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 11 May 2008 19:36:57 +0800 Subject: x86: smpboot.c: removed duplicated include Removed duplicated include in arch/x86/kernel/smpboot.c. Signed-off-by: Huang Weiyi Cc: mingo@redhat.com Cc: hpa@zytor.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/smpboot.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 38988491c622..0974fc0997b9 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -59,7 +59,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.1 From 05139d8fb445d9a3569071af1c5920fc46191b7b Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 13 May 2008 21:14:22 +0400 Subject: x86: head_64.S cleanup - use straight move to CR4 register Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 2f59ca8bd16c..7475b4c91f05 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -155,9 +155,7 @@ ENTRY(secondary_startup_64) */ /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax + movl $(X86_CR4_PAE | X86_CR4_PGE), %eax movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ -- cgit v1.2.1 From 0e192b99d7d09f08b445c31ee7c7f3d0bfb27345 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 13 May 2008 20:55:40 +0400 Subject: x86: head_64.S cleanup - use PMD_SHIFT instead of numeric constant Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 7475b4c91f05..d8ed3259e6e4 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -322,11 +322,11 @@ early_idt_ripmsg: ENTRY(name) /* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ + i = i + 1 ; \ .endr /* -- cgit v1.2.1 From bfe4bb1526945e446d2912bef2e1e2cbd2c7349e Mon Sep 17 00:00:00 2001 From: Miklos Vajna Date: Sat, 17 May 2008 22:48:13 +0200 Subject: x86: janitor work in bugs.c Just moved trailing statements to the next line, removed space before open/close parenthesis, wrapped long lines. Signed-off-by: Miklos Vajna Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/bugs.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 170d2f5523b2..1b1c56bb338f 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -59,8 +59,12 @@ static void __init check_fpu(void) return; } -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ + /* + * trap_init() enabled FXSR and company _before_ testing for FP + * problems here. + * + * Test for the divl bug.. + */ __asm__("fninit\n\t" "fldl %1\n\t" "fdivl %2\n\t" @@ -108,10 +112,15 @@ static void __init check_popad(void) "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " : "=&a" (res) : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); + : "ecx", "edi"); + /* + * If this fails, it means that any user program may lock the + * CPU hard. Too bad. + */ + if (res != 12345678) + printk("Buggy.\n"); + else + printk("OK.\n"); #endif } @@ -137,7 +146,8 @@ static void __init check_config(void) * i486+ only features! (WP works in supervisor mode and the * new "invlpg" and "bswap" instructions) */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ + defined(CONFIG_X86_BSWAP) if (boot_cpu_data.x86 == 3) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif @@ -170,6 +180,7 @@ void __init check_bugs(void) check_fpu(); check_hlt(); check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + init_utsname()->machine[1] = + '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); } -- cgit v1.2.1 From 2141261a11524acbfce86a5a213bbaea08794bbb Mon Sep 17 00:00:00 2001 From: Miklos Vajna Date: Tue, 13 May 2008 13:35:25 +0200 Subject: x86: janitor work in video-vga.c Just moved an open brace to the previous line. Signed-off-by: Miklos Vajna Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/boot/video-vga.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 40ecb8d7688c..b939cb476dec 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -259,8 +259,7 @@ static int vga_probe(void) return mode_count[adapter]; } -__videocard video_vga = -{ +__videocard video_vga = { .card_name = "VGA", .probe = vga_probe, .set_mode = vga_set_mode, -- cgit v1.2.1 From 83cd1daa1dc3400e5ca2255818641233ebb30680 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:39 +0200 Subject: x86: eliminate dead code in x86_64 entry.S Remove the not longer used handlers for reserved vectors. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/entry_64.S | 4 ---- arch/x86/kernel/traps_64.c | 3 --- 2 files changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..1f1751dfb2f3 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1120,10 +1120,6 @@ ENTRY(coprocessor_segment_overrun) zeroentry do_coprocessor_segment_overrun END(coprocessor_segment_overrun) -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..ec6d3b2130c4 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -71,7 +71,6 @@ asmlinkage void general_protection(void); asmlinkage void page_fault(void); asmlinkage void coprocessor_error(void); asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); @@ -702,12 +701,10 @@ DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) DO_ERROR( 4, SIGSEGV, "overflow", overflow) DO_ERROR( 5, SIGSEGV, "bounds", bounds) DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) /* Runs on IST stack */ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) -- cgit v1.2.1 From 48e239572271cf79412d90753a721242a765f7d9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 17:24:34 +0200 Subject: x86: fixup the fallout of the bitops changes Signed-off-by: Thomas Gleixner --- arch/x86/mm/pgtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 50159764f694..ee1d6d39edd4 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -255,7 +255,7 @@ int ptep_test_and_clear_young(struct vm_area_struct *vma, if (pte_young(*ptep)) ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, - &ptep->pte); + (unsigned long *) &ptep->pte); if (ret) pte_update(vma->vm_mm, addr, ptep); -- cgit v1.2.1 From 668a6c3654560aef8741642478973e205a4f02bf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 13:35:24 +0200 Subject: - fix mmioftrace + rcu merge interaction Signed-off-by: Thomas Gleixner --- arch/x86/mm/kmmio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index b65871e6bba6..93d82038af4b 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include -- cgit v1.2.1 From c9fea78dc9775981bed2da379568c8a8fddd1fb6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 13:53:39 +0200 Subject: x86: make NUMAQ depend on PCI NUMAQ depends on the existence of PCI hardware, and requiring PCI makes this subarch simpler and avoids build failures if PCI is disabled. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bbafeac89116..029372813ae2 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -270,7 +270,7 @@ config X86_VOYAGER config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 + depends on SMP && X86_32 && PCI select NUMA help This option is used for getting Linux to run on a (IBM/Sequent) NUMA -- cgit v1.2.1 From 1ac97018169c5a13feaa90d9671f2d6ba2d9e86e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 14:10:14 +0200 Subject: x86: untangle pci dependencies make PCI-less subarches not build with PCI - instead of complicating the PCI dependencies. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 029372813ae2..78700f5faf62 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -258,7 +258,7 @@ config X86_ELAN config X86_VOYAGER bool "Voyager (NCR)" - depends on X86_32 && (SMP || BROKEN) + depends on X86_32 && (SMP || BROKEN) && !PCI help Voyager is an MCA-based 32-way capable SMP architecture proprietary to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based. @@ -300,7 +300,7 @@ config X86_BIGSMP config X86_VISWS bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 + depends on X86_32 && !PCI help The SGI Visual Workstation series is an IA32-based workstation based on SGI systems chips with some legacy PC hardware attached. @@ -344,7 +344,7 @@ config X86_RDC321X config X86_VSMP bool "Support for ScaleMP vSMP" select PARAVIRT - depends on X86_64 + depends on X86_64 && !PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -1477,8 +1477,7 @@ endmenu menu "Bus options (PCI etc.)" config PCI - bool "PCI support" if !X86_VISWS && !X86_VSMP - depends on !X86_VOYAGER + bool "PCI support" default y select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) help -- cgit v1.2.1 From 0da72a4aeb4482c64c1142a2e36b556d13374937 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 30 Apr 2008 20:11:51 +0200 Subject: x86: fix sparse warning in mtrr/generic.c arch/x86/kernel/cpu/mtrr/generic.c:216:12: warning: symbol 'lo' shadows an earlier one Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 5d241ce94a44..0625d4158e58 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -213,12 +213,12 @@ void __init get_mtrr_state(void) mtrr_state.enabled = (lo & 0xc00) >> 10; if (amd_special_default_mtrr()) { - unsigned lo, hi; + unsigned low, high; /* TOP_MEM2 */ - rdmsr(MSR_K8_TOP_MEM2, lo, hi); - tom2 = hi; + rdmsr(MSR_K8_TOP_MEM2, low, high); + tom2 = high; tom2 <<= 32; - tom2 |= lo; + tom2 |= low; tom2 &= 0xffffff8000000ULL; } if (mtrr_show) { -- cgit v1.2.1 From 0dbfafa5fcd4dd189e2adc7b6ed9e0405e846d79 Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum Date: Wed, 23 Apr 2008 15:09:05 +0200 Subject: x86: move i386 memory setup code to e820_32.c The x86_64 code has centralized the memory setup code in e820_64.c. This patch copies that approach to i386: - early_param("mem", ...) parsing is moved from setup_32.c to e820_32.c. - setup_memory_map() and finish_e820_parsing() are factored out from setup_arch(), and declarations are added to e820_32.h. - print_memory_map() is made static and removed from e820_32.h. - user_defined_memmap is marked as __initdata. Signed-off-by: Alexander van Heukelum Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/e820_32.c | 60 ++++++++++++++++++++++++++++++++++++++++++++-- arch/x86/kernel/setup_32.c | 50 ++------------------------------------ 2 files changed, 60 insertions(+), 50 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index ed733e7cf4e6..31ea2bb8c91a 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -30,7 +30,6 @@ unsigned long pci_mem_start = 0x10000000; #ifdef CONFIG_PCI EXPORT_SYMBOL(pci_mem_start); #endif -extern int user_defined_memmap; static struct resource system_rom_resource = { .name = "System ROM", @@ -584,7 +583,7 @@ void __init e820_register_memory(void) pci_mem_start, gapstart, gapsize); } -void __init print_memory_map(char *who) +static void __init print_memory_map(char *who) { int i; @@ -692,6 +691,54 @@ e820_all_mapped(unsigned long s, unsigned long e, unsigned type) return 0; } +/* Overridden in paravirt.c if CONFIG_PARAVIRT */ +char * __init __attribute__((weak)) memory_setup(void) +{ + return machine_specific_memory_setup(); +} + +void __init setup_memory_map(void) +{ + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + print_memory_map(memory_setup()); +} + +static int __initdata user_defined_memmap; + +/* + * "mem=nopentium" disables the 4MB page tables. + * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM + * to , overriding the bios size. + * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from + * to +, overriding the bios size. + * + * HPA tells me bootloaders need to parse mem=, so no new + * option should be mem= [also see Documentation/i386/boot.txt] + */ +static int __init parse_mem(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp(arg, "nopentium") == 0) { + setup_clear_cpu_cap(X86_FEATURE_PSE); + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. + */ + unsigned long long mem_size; + + mem_size = memparse(arg, &arg); + limit_regions(mem_size); + user_defined_memmap = 1; + } + return 0; +} +early_param("mem", parse_mem); + static int __init parse_memmap(char *arg) { if (!arg) @@ -762,6 +809,15 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, new_type); } } + +void __init finish_e820_parsing(void) +{ + if (user_defined_memmap) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + print_memory_map("user"); + } +} + void __init update_e820(void) { u8 nr_map; diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2c5f8b213e86..b54c79c91efd 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -237,42 +237,6 @@ static inline void copy_edd(void) } #endif -int __initdata user_defined_memmap; - -/* - * "mem=nopentium" disables the 4MB page tables. - * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM - * to , overriding the bios size. - * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from - * to +, overriding the bios size. - * - * HPA tells me bootloaders need to parse mem=, so no new - * option should be mem= [also see Documentation/i386/boot.txt] - */ -static int __init parse_mem(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "nopentium") == 0) { - setup_clear_cpu_cap(X86_FEATURE_PSE); - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long mem_size; - - mem_size = memparse(arg, &arg); - limit_regions(mem_size); - user_defined_memmap = 1; - } - return 0; -} -early_param("mem", parse_mem); - #ifdef CONFIG_PROC_VMCORE /* elfcorehdr= specifies the location of elf core header * stored by the crashed kernel. @@ -725,12 +689,6 @@ static void set_mca_bus(int x) static void set_mca_bus(int x) { } #endif -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -char * __init __attribute__((weak)) memory_setup(void) -{ - return machine_specific_memory_setup(); -} - #ifdef CONFIG_NUMA /* * In the golden day, when everything among i386 and x86_64 will be @@ -786,8 +744,7 @@ void __init setup_arch(char **cmdline_p) #endif ARCH_SETUP - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - print_memory_map(memory_setup()); + setup_memory_map(); copy_edd(); @@ -807,10 +764,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - if (user_defined_memmap) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); - } + finish_e820_parsing(); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; -- cgit v1.2.1 From 95ffa2438d0e9c48779f0106b1c0eb36165e759c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 03:52:33 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete layout, v8 some BIOS like to use continus MTRR layout, and X driver can not add WB entries for graphical cards when 4g or more RAM installed. the patch will change MTRR to discrete. mtrr_chunk_size= could be used to have smaller continuous block to hold holes. default is 256m, could be set according to size of graphics card memory. mtrr_gran_size= could be used to send smallest mtrr block to avoid run out of MTRRs v2: fix -1 for UC checking v3: default to disable, and need use enable_mtrr_cleanup to enable this feature skip the var state change warning. remove next_basek in range_to_mtrr() v4: correct warning mask. v5: CONFIG_MTRR_SANITIZER v6: fix 1g, 2g, 512 aligment with extra hole v7: gran_sizek to prevent running out of MTRRs. v8: fix hole_basek caculation caused when removing next_basek gran_sizek using when basek is 0. need to apply [PATCH] x86: fix trimming e820 with MTRR holes. right after this one. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 26 +++ arch/x86/kernel/cpu/mtrr/generic.c | 32 ++- arch/x86/kernel/cpu/mtrr/main.c | 467 ++++++++++++++++++++++++++++++++++++- arch/x86/kernel/cpu/mtrr/mtrr.h | 3 + 4 files changed, 514 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..97a1764a3d20 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1092,6 +1092,32 @@ config MTRR See for more information. +config MTRR_SANITIZER + def_bool y + prompt "MTRR cleanup support" + depends on MTRR + help + Convert MTRR layout from continuous to discrete, so some X driver + could add WB entries. + + Say N here if you see bootup problems (boot crash, boot hang, + spontaneous reboots). + + Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size + could be used to send largest mtrr entry size for continuous block + to hold holes (aka. UC entries) + + If unsure, say Y. + +config MTRR_SANITIZER_ENABLE_DEFAULT + def_bool y + prompt "Enable MTRR cleanup by default" + depends on MTRR_SANITIZER + help + Enable mtrr cleanup by default + + If unsure, say Y. + config X86_PAT bool prompt "x86 PAT support" diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 0625d4158e58..5aae648600bf 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -37,7 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = { static unsigned long smp_changes_mask; static struct mtrr_state mtrr_state = {}; static int mtrr_state_set; -static u64 tom2; +u64 mtrr_tom2; #undef MODULE_PARAM_PREFIX #define MODULE_PARAM_PREFIX "mtrr." @@ -139,8 +139,8 @@ u8 mtrr_type_lookup(u64 start, u64 end) } } - if (tom2) { - if (start >= (1ULL<<32) && (end < tom2)) + if (mtrr_tom2) { + if (start >= (1ULL<<32) && (end < mtrr_tom2)) return MTRR_TYPE_WRBACK; } @@ -158,6 +158,20 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr) rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi); } +/* fill the MSR pair relating to a var range */ +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi) +{ + struct mtrr_var_range *vr; + + vr = mtrr_state.var_ranges; + + vr[index].base_lo = base_lo; + vr[index].base_hi = base_hi; + vr[index].mask_lo = mask_lo; + vr[index].mask_hi = mask_hi; +} + static void get_fixed_ranges(mtrr_type * frs) { @@ -216,10 +230,10 @@ void __init get_mtrr_state(void) unsigned low, high; /* TOP_MEM2 */ rdmsr(MSR_K8_TOP_MEM2, low, high); - tom2 = high; - tom2 <<= 32; - tom2 |= low; - tom2 &= 0xffffff8000000ULL; + mtrr_tom2 = high; + mtrr_tom2 <<= 32; + mtrr_tom2 |= low; + mtrr_tom2 &= 0xffffff8000000ULL; } if (mtrr_show) { int high_width; @@ -251,9 +265,9 @@ void __init get_mtrr_state(void) else printk(KERN_INFO "MTRR %u disabled\n", i); } - if (tom2) { + if (mtrr_tom2) { printk(KERN_INFO "TOM2: %016llx aka %lldM\n", - tom2, tom2>>20); + mtrr_tom2, mtrr_tom2>>20); } } mtrr_state_set = 1; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 6a1e278d9323..8a6f68b45e3e 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -609,6 +610,452 @@ static struct sysdev_driver mtrr_sysdev_driver = { .resume = mtrr_restore, }; +#ifdef CONFIG_MTRR_SANITIZER + +#ifdef CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT +static int enable_mtrr_cleanup __initdata = 1; +#else +static int enable_mtrr_cleanup __initdata; +#endif + +#else + +static int enable_mtrr_cleanup __initdata = -1; + +#endif + +static int __init disable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 0; + return 0; +} +early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); + +static int __init enable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 1; + return 0; +} +early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); + +#define RANGE_NUM 256 + +struct res_range { + unsigned long start; + unsigned long end; +}; + +static int __init add_range(struct res_range *range, int nr_range, unsigned long start, + unsigned long end, int merge) +{ + int i; + + if (!merge) + goto addit; + + /* try to merge it with old one */ + for (i = 0; i < nr_range; i++) { + unsigned long final_start, final_end; + unsigned long common_start, common_end; + + if (!range[i].end) + continue; + + common_start = max(range[i].start, start); + common_end = min(range[i].end, end); + if (common_start > common_end + 1) + continue; + + final_start = min(range[i].start, start); + final_end = max(range[i].end, end); + + range[i].start = final_start; + range[i].end = final_end; + return nr_range; + } + +addit: + /* need to add that */ + if (nr_range >= RANGE_NUM) + return nr_range; + + range[nr_range].start = start; + range[nr_range].end = end; + + nr_range++; + + return nr_range; + +} +static void __init subtract_range(struct res_range *range, unsigned long start, + unsigned long end) +{ + int i; + int j; + + for (j = 0; j < RANGE_NUM; j++) { + if (!range[j].end) + continue; + + if (start <= range[j].start && end >= range[j].end) { + range[j].start = 0; + range[j].end = 0; + continue; + } + + if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + range[j].start = end + 1; + continue; + } + + + if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + range[j].end = start - 1; + continue; + } + + if (start > range[j].start && end < range[j].end) { + /* find the new spare */ + for (i = 0; i < RANGE_NUM; i++) { + if (range[i].end == 0) + break; + } + if (i < RANGE_NUM) { + range[i].end = range[j].end; + range[i].start = end + 1; + } else { + printk(KERN_ERR "run of slot in ranges\n"); + } + range[j].end = start - 1; + continue; + } + } +} + +static int __init cmp_range(const void *x1, const void *x2) +{ + const struct res_range *r1 = x1; + const struct res_range *r2 = x2; + long start1, start2; + + start1 = r1->start; + start2 = r2->start; + + return start1 - start2; +} + +struct var_mtrr_state { + unsigned long range_startk, range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + unsigned int reg; + unsigned address_bits; +}; + +static void __init set_var_mtrr( + unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned address_bits) +{ + u32 base_lo, base_hi, mask_lo, mask_hi; + unsigned address_mask_high; + + if (!sizek) { + fill_mtrr_var_range(reg, 0, 0, 0, 0); + return; + } + + address_mask_high = ((1u << (address_bits - 32u)) - 1u); + + base_hi = basek >> 22; + base_lo = basek << 10; + + if (sizek < 4*1024*1024) { + mask_hi = address_mask_high; + mask_lo = ~((sizek << 10) - 1); + } else { + mask_hi = address_mask_high & (~((sizek >> 22) - 1)); + mask_lo = 0; + } + + base_lo |= type; + mask_lo |= 0x800; + fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); +} + +static unsigned int __init range_to_mtrr(unsigned int reg, + unsigned long range_startk, unsigned long range_sizek, + unsigned char type, unsigned address_bits) +{ + if (!range_sizek || (reg >= num_var_ranges)) + return reg; + + while (range_sizek) { + unsigned long max_align, align; + unsigned long sizek; + /* Compute the maximum size I can make a range */ + if (range_startk) + max_align = ffs(range_startk) - 1; + else + max_align = 32; + align = fls(range_sizek) - 1; + if (align > max_align) + align = max_align; + + sizek = 1 << align; + printk(KERN_INFO "Setting variable MTRR %d, base: %ldMB, range: %ldMB, type %s\n", + reg, range_startk >> 10, sizek >> 10, + (type == MTRR_TYPE_UNCACHABLE)?"UC": + ((type == MTRR_TYPE_WRBACK)?"WB":"Other") + ); + set_var_mtrr(reg++, range_startk, sizek, type, address_bits); + range_startk += sizek; + range_sizek -= sizek; + if (reg >= num_var_ranges) + break; + } + return reg; +} + +static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +{ + unsigned long hole_basek, hole_sizek; + unsigned long range0_basek, range0_sizek; + unsigned long range_basek, range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + + hole_basek = 0; + hole_sizek = 0; + chunk_sizek = state->chunk_sizek; + gran_sizek = state->gran_sizek; + + /* align with gran size, prevent small block used up MTRRs */ + range_basek = ALIGN(state->range_startk, gran_sizek); + if ((range_basek > basek) && basek) + return; + range_sizek = ALIGN(state->range_sizek - (range_basek - state->range_startk), gran_sizek); + + while (range_basek + range_sizek > (state->range_startk + state->range_sizek)) { + range_sizek -= gran_sizek; + if (!range_sizek) + return; + } + state->range_startk = range_basek; + state->range_sizek = range_sizek; + + /* try to append some small hole */ + range0_basek = state->range_startk; + range0_sizek = ALIGN(state->range_sizek, chunk_sizek); + if ((range0_sizek == state->range_sizek) || + ((range0_basek + range0_sizek - chunk_sizek > basek) && basek)) { + printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + return; + } + + + range0_sizek -= chunk_sizek; + printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); + + range_basek = range0_basek + range0_sizek; + range_sizek = chunk_sizek; + if (range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) { + hole_sizek = range_sizek - (state->range_sizek - range0_sizek); + hole_basek = range_basek + range_sizek - hole_sizek; + } else + range_sizek = state->range_sizek - range0_sizek; + + printk(KERN_INFO "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, + range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + if (hole_sizek) { + printk(KERN_INFO "hole: %016lx - %016lx\n", hole_basek<<10, (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, + hole_sizek, MTRR_TYPE_UNCACHABLE, state->address_bits); + } +} + +static void __init set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) +{ + unsigned long basek, sizek; + + if (state->reg >= num_var_ranges) + return; + + basek = base_pfn << (PAGE_SHIFT - 10); + sizek = size_pfn << (PAGE_SHIFT - 10); + + /* See if I can merge with the last range */ + if ((basek <= 1024) || (state->range_startk + state->range_sizek == basek)) { + unsigned long endk = basek + sizek; + state->range_sizek = endk - state->range_startk; + return; + } + /* Write the range mtrrs */ + if (state->range_sizek != 0) { + range_to_mtrr_with_hole(state, basek); + + state->range_startk = 0; + state->range_sizek = 0; + } + /* Allocate an msr */ + state->range_startk = basek; + state->range_sizek = sizek; +} + +/* mininum size of mtrr block that can take hole */ +static u64 mtrr_chunk_size __initdata = (256ULL<<20); + +static int __init parse_mtrr_chunk_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_chunk_size = memparse(p, &p); + return 0; +} +early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); + +/* granity of mtrr of block */ +static u64 mtrr_gran_size __initdata = (64ULL<<20); + +static int __init parse_mtrr_gran_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_gran_size = memparse(p, &p); + return 0; +} +early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); + +static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, unsigned address_bits) +{ + struct var_mtrr_state var_state; + int i; + + var_state.range_startk = 0; + var_state.range_sizek = 0; + var_state.reg = 0; + var_state.address_bits = address_bits; + var_state.chunk_sizek = mtrr_chunk_size >> 10; + var_state.gran_sizek = mtrr_gran_size >> 10; + + /* Write the range etc */ + for (i = 0; i < nr_range; i++) + set_var_mtrr_range(&var_state, range[i].start, range[i].end - range[i].start + 1); + + /* Write the last range */ + range_to_mtrr_with_hole(&var_state, 0); + printk(KERN_INFO "DONE variable MTRRs\n"); + /* Clear out the extra MTRR's */ + while (var_state.reg < num_var_ranges) + set_var_mtrr(var_state.reg++, 0, 0, 0, var_state.address_bits); +} + +static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, unsigned long extra_remove_base, unsigned long extra_remove_size) +{ + unsigned long i, base, size; + mtrr_type type; + + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type != MTRR_TYPE_WRBACK) + continue; + nr_range = add_range(range, nr_range, base, base + size - 1, 1); + } + printk(KERN_INFO "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + /* take out UC ranges */ + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type != MTRR_TYPE_UNCACHABLE) + continue; + if (!size) + continue; + subtract_range(range, base, base + size - 1); + } + if (extra_remove_size) + subtract_range(range, extra_remove_base, extra_remove_base + extra_remove_size - 1); + + /* get new range num */ + nr_range = 0; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + nr_range++; + } + printk(KERN_INFO "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + printk(KERN_INFO "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + return nr_range; +} + +static int __init mtrr_cleanup(unsigned address_bits) +{ + unsigned long i, base, size, def, dummy; + mtrr_type type; + struct res_range range[RANGE_NUM]; + int nr_range; + unsigned long extra_remove_base, extra_remove_size; + + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; + + if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1) + return 0; + rdmsr(MTRRdefType_MSR, def, dummy); + def &= 0xff; + if (def != MTRR_TYPE_UNCACHABLE) + return 0; + + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type >= MTRR_NUM_TYPES) + continue; + if (!size) + type = MTRR_NUM_TYPES; + num[type]++; + } + + /* check if we got UC entries */ + if (!num[MTRR_TYPE_UNCACHABLE]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + memset(range, 0, sizeof(range)); + extra_remove_size = 0; + if (mtrr_tom2) { + extra_remove_base = 1 << (32 - PAGE_SHIFT); + extra_remove_size = (mtrr_tom2>>PAGE_SHIFT) - extra_remove_base; + } + nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); + + /* convert ranges to var ranges state */ + x86_setup_var_mtrrs(range, nr_range, address_bits); + + return 1; + +} + static int disable_mtrr_trim; static int __init disable_mtrr_trim_setup(char *str) @@ -729,18 +1176,21 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) */ void __init mtrr_bp_init(void) { + u32 phys_addr; init_ifs(); + phys_addr = 32; + if (cpu_has_mtrr) { mtrr_if = &generic_mtrr_ops; size_or_mask = 0xff000000; /* 36 bits */ size_and_mask = 0x00f00000; + phys_addr = 36; /* This is an AMD specific MSR, but we assume(hope?) that Intel will implement it to when they extend the address bus of the Xeon. */ if (cpuid_eax(0x80000000) >= 0x80000008) { - u32 phys_addr; phys_addr = cpuid_eax(0x80000008) & 0xff; /* CPUID workaround for Intel 0F33/0F34 CPU */ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && @@ -758,6 +1208,7 @@ void __init mtrr_bp_init(void) don't support PAE */ size_or_mask = 0xfff00000; /* 32 bits */ size_and_mask = 0; + phys_addr = 32; } } else { switch (boot_cpu_data.x86_vendor) { @@ -791,8 +1242,13 @@ void __init mtrr_bp_init(void) if (mtrr_if) { set_num_var_ranges(); init_table(); - if (use_intel()) + if (use_intel()) { get_mtrr_state(); + + if (mtrr_cleanup(phys_addr)) + mtrr_if->set_all(); + + } } } @@ -829,9 +1285,10 @@ static int __init mtrr_init_finialize(void) { if (!mtrr_if) return 0; - if (use_intel()) - mtrr_state_warn(); - else { + if (use_intel()) { + if (enable_mtrr_cleanup < 1) + mtrr_state_warn(); + } else { /* The CPUs haven't MTRR and seem to not support SMP. They have * specific drivers, we use a tricky method to support * suspend/resume for them. diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h index 2cc77eb6fea3..2dc4ec656b23 100644 --- a/arch/x86/kernel/cpu/mtrr/mtrr.h +++ b/arch/x86/kernel/cpu/mtrr/mtrr.h @@ -81,6 +81,8 @@ void set_mtrr_done(struct set_mtrr_context *ctxt); void set_mtrr_cache_disable(struct set_mtrr_context *ctxt); void set_mtrr_prepare_save(struct set_mtrr_context *ctxt); +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi); void get_mtrr_state(void); extern void set_mtrr_ops(struct mtrr_ops * ops); @@ -92,6 +94,7 @@ extern struct mtrr_ops * mtrr_if; #define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1) extern unsigned int num_var_ranges; +extern u64 mtrr_tom2; void mtrr_state_warn(void); const char *mtrr_attrib_to_str(int x); -- cgit v1.2.1 From 42651f15824d003e8357693ab72c4dbb3e280836 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 01:59:49 -0700 Subject: x86: fix trimming e820 with MTRR holes. converting MTRR layout from continous to discrete, some time could run out of MTRRs. So add gran_sizek to prevent that by dumpping small RAM piece less than gran_sizek. previous trimming only can handle highest_pfn from mtrr to end_pfn from e820. when have more than 4g RAM installed, there will be holes below 4g. so need to check ram below 4g is coverred well. need to be applied after [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v7 Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/main.c | 101 +++++++++++++++++++++++++++++++++------- arch/x86/kernel/e820_32.c | 7 ++- arch/x86/kernel/e820_64.c | 6 ++- 3 files changed, 95 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 8a6f68b45e3e..9ab5c16b0d52 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1095,6 +1095,17 @@ int __init amd_special_default_mtrr(void) return 0; } +static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) +{ + u64 trim_start, trim_size; + trim_start = start_pfn; + trim_start <<= PAGE_SHIFT; + trim_size = limit_pfn; + trim_size <<= PAGE_SHIFT; + trim_size -= trim_start; + return update_memory_range(trim_start, trim_size, E820_RAM, + E820_RESERVED); +} /** * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs * @end_pfn: ending page frame number @@ -1110,8 +1121,13 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) { unsigned long i, base, size, highest_pfn = 0, def, dummy; mtrr_type type; - u64 trim_start, trim_size; + struct res_range range[RANGE_NUM]; + int nr_range; + u64 total_real_trim_size; + int changed; + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; /* * Make sure we only trim uncachable memory on machines that * support the Intel MTRR architecture: @@ -1123,9 +1139,6 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) if (def != MTRR_TYPE_UNCACHABLE) return 0; - if (amd_special_default_mtrr()) - return 0; - /* Find highest cached pfn */ for (i = 0; i < num_var_ranges; i++) { mtrr_if->get(i, &base, &size, &type); @@ -1145,26 +1158,80 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) return 0; } - if (highest_pfn < end_pfn) { + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type >= MTRR_NUM_TYPES) + continue; + if (!size) + type = MTRR_NUM_TYPES; + num[type]++; + } + + /* no entry for WB? */ + if (!num[MTRR_TYPE_WRBACK]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + memset(range, 0, sizeof(range)); + nr_range = 0; + if (mtrr_tom2) { + range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT)); + range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1; + if (highest_pfn < range[nr_range].end + 1) + highest_pfn = range[nr_range].end + 1; + nr_range++; + } + nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); + + changed = 0; + total_real_trim_size = 0; + + /* check the top at first */ + i = nr_range - 1; + if (range[i].end + 1 < end_pfn) { + total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); + } + + if (total_real_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" - " all of memory, losing %luMB of RAM.\n", - (end_pfn - highest_pfn) >> (20 - PAGE_SHIFT)); + " all of memory, losing %lluMB of RAM.\n", + total_real_trim_size >> 20); WARN_ON(1); - printk(KERN_INFO "update e820 for mtrr\n"); - trim_start = highest_pfn; - trim_start <<= PAGE_SHIFT; - trim_size = end_pfn; - trim_size <<= PAGE_SHIFT; - trim_size -= trim_start; - update_memory_range(trim_start, trim_size, E820_RAM, - E820_RESERVED); + printk(KERN_INFO "update e820 for mtrr -- end_pfn\n"); update_e820(); - return 1; + changed = 1; } - return 0; + total_real_trim_size = 0; + if (range[0].start) + total_real_trim_size += real_trim_memory(0, range[0].start); + + for (i = 0; i < nr_range - 1; i--) { + if (range[i].end + 1 < range[i+1].start) + total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); + } + + if (total_real_trim_size) { + printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" + " all of memory, losing %lluMB of RAM.\n", + total_real_trim_size >> 20); + + WARN_ON(1); + + printk(KERN_INFO "update e820 for mtrr -- holes\n"); + update_e820(); + changed = 1; + } + + return changed; } /** diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 31ea2bb8c91a..857f706273a8 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -783,10 +783,11 @@ static int __init parse_memmap(char *arg) return 0; } early_param("memmap", parse_memmap); -void __init update_memory_range(u64 start, u64 size, unsigned old_type, +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { int i; + u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -798,6 +799,7 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, /* totally covered? */ if (ei->addr >= start && ei->size <= size) { ei->type = new_type; + real_updated_size += ei->size; continue; } /* partially covered */ @@ -807,7 +809,10 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, continue; add_memory_region(final_start, final_end - final_start, new_type); + real_updated_size += final_end - final_start; } + + return real_updated_size; } void __init finish_e820_parsing(void) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 124480c0008d..848b2cd2d1dd 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -829,10 +829,11 @@ void __init finish_e820_parsing(void) } } -void __init update_memory_range(u64 start, u64 size, unsigned old_type, +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { int i; + u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -844,6 +845,7 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, /* totally covered? */ if (ei->addr >= start && ei->size <= size) { ei->type = new_type; + real_updated_size += ei->size; continue; } /* partially covered */ @@ -853,7 +855,9 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, continue; add_memory_region(final_start, final_end - final_start, new_type); + real_updated_size += final_end - final_start; } + return real_updated_size; } void __init update_e820(void) -- cgit v1.2.1 From 8a374026c265476b1acfc3c186a66d59ebdb2cda Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 20:25:16 -0700 Subject: x86: fix trimming e820 with MTRR holes. - fix v2: process hole then end_pfn fix update_memory_range with whole cover comparing Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/main.c | 44 ++++++++++++++--------------------------- arch/x86/kernel/e820_32.c | 3 ++- arch/x86/kernel/e820_64.c | 3 ++- 3 files changed, 19 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 9ab5c16b0d52..5a2a4c146333 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1098,11 +1098,12 @@ int __init amd_special_default_mtrr(void) static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) { u64 trim_start, trim_size; - trim_start = start_pfn; + trim_start = start_pfn; trim_start <<= PAGE_SHIFT; trim_size = limit_pfn; trim_size <<= PAGE_SHIFT; trim_size -= trim_start; + return update_memory_range(trim_start, trim_size, E820_RAM, E820_RESERVED); } @@ -1124,7 +1125,6 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) struct res_range range[RANGE_NUM]; int nr_range; u64 total_real_trim_size; - int changed; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1189,49 +1189,35 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) } nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); - changed = 0; - total_real_trim_size = 0; - - /* check the top at first */ - i = nr_range - 1; - if (range[i].end + 1 < end_pfn) { - total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); - } - - if (total_real_trim_size) { - printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" - " all of memory, losing %lluMB of RAM.\n", - total_real_trim_size >> 20); - - WARN_ON(1); - - printk(KERN_INFO "update e820 for mtrr -- end_pfn\n"); - update_e820(); - changed = 1; - } - total_real_trim_size = 0; + /* check the head */ if (range[0].start) total_real_trim_size += real_trim_memory(0, range[0].start); - - for (i = 0; i < nr_range - 1; i--) { + /* check the holes */ + for (i = 0; i < nr_range - 1; i++) { if (range[i].end + 1 < range[i+1].start) total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); } + /* check the top */ + i = nr_range - 1; + if (range[i].end + 1 < end_pfn) + total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); if (total_real_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" " all of memory, losing %lluMB of RAM.\n", total_real_trim_size >> 20); - WARN_ON(1); + if (enable_mtrr_cleanup < 1) + WARN_ON(1); - printk(KERN_INFO "update e820 for mtrr -- holes\n"); + printk(KERN_INFO "update e820 for mtrr\n"); update_e820(); - changed = 1; + + return 1; } - return changed; + return 0; } /** diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 857f706273a8..751d517d802c 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -797,7 +797,8 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, if (ei->type != old_type) continue; /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { ei->type = new_type; real_updated_size += ei->size; continue; diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 848b2cd2d1dd..c45b4dea4055 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -843,7 +843,8 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, if (ei->type != old_type) continue; /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { ei->type = new_type; real_updated_size += ei->size; continue; -- cgit v1.2.1 From f5098d62c1d1cede8ff23d01bbf50a421f110562 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 20:25:58 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete layout v8 - fix v9: address format change requests by Ingo more case handling in range_to_var_with_hole Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 9 +-- arch/x86/kernel/cpu/mtrr/main.c | 164 ++++++++++++++++++++++------------------ 2 files changed, 94 insertions(+), 79 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 97a1764a3d20..f417fe33d852 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1110,13 +1110,12 @@ config MTRR_SANITIZER If unsure, say Y. config MTRR_SANITIZER_ENABLE_DEFAULT - def_bool y - prompt "Enable MTRR cleanup by default" + int "MTRR cleanup enable value (0-1)" + range 0 1 + default "0" depends on MTRR_SANITIZER help - Enable mtrr cleanup by default - - If unsure, say Y. + Enable mtrr cleanup default value config X86_PAT bool diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 5a2a4c146333..79597d3c3431 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -611,17 +611,9 @@ static struct sysdev_driver mtrr_sysdev_driver = { }; #ifdef CONFIG_MTRR_SANITIZER - -#ifdef CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT -static int enable_mtrr_cleanup __initdata = 1; -#else -static int enable_mtrr_cleanup __initdata; -#endif - +static int enable_mtrr_cleanup __initdata = CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; #else - static int enable_mtrr_cleanup __initdata = -1; - #endif static int __init disable_mtrr_cleanup_setup(char *str) @@ -640,6 +632,7 @@ static int __init enable_mtrr_cleanup_setup(char *str) } early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); +/* should be related to MTRR_VAR_RANGES nums */ #define RANGE_NUM 256 struct res_range { @@ -647,13 +640,27 @@ struct res_range { unsigned long end; }; -static int __init add_range(struct res_range *range, int nr_range, unsigned long start, - unsigned long end, int merge) +static int __init +add_range(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) { - int i; + /* out of slots */ + if (nr_range >= RANGE_NUM) + return nr_range; - if (!merge) - goto addit; + range[nr_range].start = start; + range[nr_range].end = end; + + nr_range++; + + return nr_range; +} + +static int __init +add_range_with_merge(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) +{ + int i; /* try to merge it with old one */ for (i = 0; i < nr_range; i++) { @@ -676,24 +683,14 @@ static int __init add_range(struct res_range *range, int nr_range, unsigned long return nr_range; } -addit: /* need to add that */ - if (nr_range >= RANGE_NUM) - return nr_range; - - range[nr_range].start = start; - range[nr_range].end = end; - - nr_range++; - - return nr_range; - + return add_range(range, nr_range, start, end); } -static void __init subtract_range(struct res_range *range, unsigned long start, - unsigned long end) + +static void __init +subtract_range(struct res_range *range, unsigned long start, unsigned long end) { - int i; - int j; + int i, j; for (j = 0; j < RANGE_NUM; j++) { if (!range[j].end) @@ -747,46 +744,47 @@ static int __init cmp_range(const void *x1, const void *x2) } struct var_mtrr_state { - unsigned long range_startk, range_sizek; - unsigned long chunk_sizek; - unsigned long gran_sizek; - unsigned int reg; - unsigned address_bits; + unsigned long range_startk; + unsigned long range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + unsigned int reg; + unsigned int address_bits; }; -static void __init set_var_mtrr( - unsigned int reg, unsigned long basek, unsigned long sizek, - unsigned char type, unsigned address_bits) +static void __init +set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned address_bits) { u32 base_lo, base_hi, mask_lo, mask_hi; - unsigned address_mask_high; + u64 base, mask; if (!sizek) { fill_mtrr_var_range(reg, 0, 0, 0, 0); return; } - address_mask_high = ((1u << (address_bits - 32u)) - 1u); + mask = (1ULL << address_bits) - 1; + mask &= ~((((u64)sizek) << 10) - 1); - base_hi = basek >> 22; - base_lo = basek << 10; + base = ((u64)basek) << 10; - if (sizek < 4*1024*1024) { - mask_hi = address_mask_high; - mask_lo = ~((sizek << 10) - 1); - } else { - mask_hi = address_mask_high & (~((sizek >> 22) - 1)); - mask_lo = 0; - } + base |= type; + mask |= 0x800; + + base_lo = base & ((1ULL<<32) - 1); + base_hi = base >> 32; + + mask_lo = mask & ((1ULL<<32) - 1); + mask_hi = mask >> 32; - base_lo |= type; - mask_lo |= 0x800; fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); } -static unsigned int __init range_to_mtrr(unsigned int reg, - unsigned long range_startk, unsigned long range_sizek, - unsigned char type, unsigned address_bits) +static unsigned int __init +range_to_mtrr(unsigned int reg, unsigned long range_startk, + unsigned long range_sizek, unsigned char type, + unsigned address_bits) { if (!range_sizek || (reg >= num_var_ranges)) return reg; @@ -794,6 +792,7 @@ static unsigned int __init range_to_mtrr(unsigned int reg, while (range_sizek) { unsigned long max_align, align; unsigned long sizek; + /* Compute the maximum size I can make a range */ if (range_startk) max_align = ffs(range_startk) - 1; @@ -818,7 +817,8 @@ static unsigned int __init range_to_mtrr(unsigned int reg, return reg; } -static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +static void __init +range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) { unsigned long hole_basek, hole_sizek; unsigned long range0_basek, range0_sizek; @@ -848,23 +848,31 @@ static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigne /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); - if ((range0_sizek == state->range_sizek) || - ((range0_basek + range0_sizek - chunk_sizek > basek) && basek)) { + if (range0_sizek == state->range_sizek) { printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); return; + } else if (basek) { + while (range0_basek + range0_sizek - chunk_sizek > basek) { + range0_sizek -= chunk_sizek; + if (!range0_sizek) + break; + } } - range0_sizek -= chunk_sizek; + if (range0_sizek > chunk_sizek) + range0_sizek -= chunk_sizek; printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); range_basek = range0_basek + range0_sizek; range_sizek = chunk_sizek; - if (range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) { + + if ((range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) && + (range_basek + range_sizek <= basek)) { hole_sizek = range_sizek - (state->range_sizek - range0_sizek); hole_basek = range_basek + range_sizek - hole_sizek; } else @@ -880,7 +888,9 @@ static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigne } } -static void __init set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) +static void __init +set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, + unsigned long size_pfn) { unsigned long basek, sizek; @@ -921,7 +931,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p) early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); /* granity of mtrr of block */ -static u64 mtrr_gran_size __initdata = (64ULL<<20); +static u64 mtrr_gran_size __initdata = (1ULL<<20); static int __init parse_mtrr_gran_size_opt(char *p) { @@ -932,17 +942,19 @@ static int __init parse_mtrr_gran_size_opt(char *p) } early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); -static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, unsigned address_bits) +static void __init +x86_setup_var_mtrrs(struct res_range *range, int nr_range, + unsigned address_bits) { struct var_mtrr_state var_state; int i; - var_state.range_startk = 0; - var_state.range_sizek = 0; - var_state.reg = 0; - var_state.address_bits = address_bits; - var_state.chunk_sizek = mtrr_chunk_size >> 10; - var_state.gran_sizek = mtrr_gran_size >> 10; + var_state.range_startk = 0; + var_state.range_sizek = 0; + var_state.reg = 0; + var_state.address_bits = address_bits; + var_state.chunk_sizek = mtrr_chunk_size >> 10; + var_state.gran_sizek = mtrr_gran_size >> 10; /* Write the range etc */ for (i = 0; i < nr_range; i++) @@ -952,11 +964,16 @@ static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, un range_to_mtrr_with_hole(&var_state, 0); printk(KERN_INFO "DONE variable MTRRs\n"); /* Clear out the extra MTRR's */ - while (var_state.reg < num_var_ranges) - set_var_mtrr(var_state.reg++, 0, 0, 0, var_state.address_bits); + while (var_state.reg < num_var_ranges) { + set_var_mtrr(var_state.reg, 0, 0, 0, var_state.address_bits); + var_state.reg++; + } } -static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, unsigned long extra_remove_base, unsigned long extra_remove_size) +static int __init +x86_get_mtrr_mem_range(struct res_range *range, int nr_range, + unsigned long extra_remove_base, + unsigned long extra_remove_size) { unsigned long i, base, size; mtrr_type type; @@ -965,7 +982,7 @@ static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, mtrr_if->get(i, &base, &size, &type); if (type != MTRR_TYPE_WRBACK) continue; - nr_range = add_range(range, nr_range, base, base + size - 1, 1); + nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); } printk(KERN_INFO "After WB checking\n"); for (i = 0; i < nr_range; i++) @@ -1005,11 +1022,11 @@ static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, static int __init mtrr_cleanup(unsigned address_bits) { + unsigned long extra_remove_base, extra_remove_size; unsigned long i, base, size, def, dummy; - mtrr_type type; struct res_range range[RANGE_NUM]; + mtrr_type type; int nr_range; - unsigned long extra_remove_base, extra_remove_size; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1053,7 +1070,6 @@ static int __init mtrr_cleanup(unsigned address_bits) x86_setup_var_mtrrs(range, nr_range, address_bits); return 1; - } static int disable_mtrr_trim; -- cgit v1.2.1 From 12031a624af7816ec7660b82be648aa3703b4ebe Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 2 May 2008 02:40:22 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete - auto detect v4 Loop through mtrr chunk_size and gran_size from 1M to 2G to find out the optimal value so user does not need to add mtrr_chunk_size and mtrr_gran_size to the kernel command line. If optimal value is not found, print out all list to help select less optimal value. Add mtrr_spare_reg_nr= so user could set 2 instead of 1, if the card need more entries. v2: find the one with more spare entries v3: fix hole_basek offset v4: tight the compare between range and range_new loop stop with 4g Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Gabriel C Cc: Mika Fischer Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 9 + arch/x86/kernel/cpu/mtrr/main.c | 610 ++++++++++++++++++++++++++++++---------- 2 files changed, 473 insertions(+), 146 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f417fe33d852..9e9761504422 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1117,6 +1117,15 @@ config MTRR_SANITIZER_ENABLE_DEFAULT help Enable mtrr cleanup default value +config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT + int "MTRR cleanup spare reg num (0-7)" + range 0 7 + default "1" + depends on MTRR_SANITIZER + help + mtrr cleanup spare entries default, it can be changed via + mtrr_spare_reg_nr= + config X86_PAT bool prompt "x86 PAT support" diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 79597d3c3431..e6c162c379ac 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -610,28 +610,6 @@ static struct sysdev_driver mtrr_sysdev_driver = { .resume = mtrr_restore, }; -#ifdef CONFIG_MTRR_SANITIZER -static int enable_mtrr_cleanup __initdata = CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; -#else -static int enable_mtrr_cleanup __initdata = -1; -#endif - -static int __init disable_mtrr_cleanup_setup(char *str) -{ - if (enable_mtrr_cleanup != -1) - enable_mtrr_cleanup = 0; - return 0; -} -early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); - -static int __init enable_mtrr_cleanup_setup(char *str) -{ - if (enable_mtrr_cleanup != -1) - enable_mtrr_cleanup = 1; - return 0; -} -early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); - /* should be related to MTRR_VAR_RANGES nums */ #define RANGE_NUM 256 @@ -702,13 +680,15 @@ subtract_range(struct res_range *range, unsigned long start, unsigned long end) continue; } - if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + if (start <= range[j].start && end < range[j].end && + range[j].start < end + 1) { range[j].start = end + 1; continue; } - if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + if (start > range[j].start && end >= range[j].end && + range[j].end > start - 1) { range[j].end = start - 1; continue; } @@ -743,18 +723,123 @@ static int __init cmp_range(const void *x1, const void *x2) return start1 - start2; } +struct var_mtrr_range_state { + unsigned long base_pfn; + unsigned long size_pfn; + mtrr_type type; +}; + +struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; + +static int __init +x86_get_mtrr_mem_range(struct res_range *range, int nr_range, + unsigned long extra_remove_base, + unsigned long extra_remove_size) +{ + unsigned long i, base, size; + mtrr_type type; + + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_WRBACK) + continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; + nr_range = add_range_with_merge(range, nr_range, base, + base + size - 1); + } + printk(KERN_DEBUG "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* take out UC ranges */ + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_UNCACHABLE) + continue; + size = range_state[i].size_pfn; + if (!size) + continue; + base = range_state[i].base_pfn; + subtract_range(range, base, base + size - 1); + } + if (extra_remove_size) + subtract_range(range, extra_remove_base, + extra_remove_base + extra_remove_size - 1); + + /* get new range num */ + nr_range = 0; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + nr_range++; + } + printk(KERN_DEBUG "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + printk(KERN_DEBUG "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* clear those is not used */ + for (i = nr_range; i < RANGE_NUM; i++) + memset(&range[i], 0, sizeof(range[i])); + + return nr_range; +} + +static struct res_range __initdata range[RANGE_NUM]; + +#ifdef CONFIG_MTRR_SANITIZER + +static unsigned long __init sum_ranges(struct res_range *range, int nr_range) +{ + unsigned long sum; + int i; + + sum = 0; + for (i = 0; i < nr_range; i++) + sum += range[i].end + 1 - range[i].start; + + return sum; +} + +static int enable_mtrr_cleanup __initdata = + CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; + +static int __init disable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 0; + return 0; +} +early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); + +static int __init enable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 1; + return 0; +} +early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); + struct var_mtrr_state { unsigned long range_startk; unsigned long range_sizek; unsigned long chunk_sizek; unsigned long gran_sizek; unsigned int reg; - unsigned int address_bits; }; static void __init set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, - unsigned char type, unsigned address_bits) + unsigned char type, unsigned int address_bits) { u32 base_lo, base_hi, mask_lo, mask_hi; u64 base, mask; @@ -781,10 +866,34 @@ set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); } +static void __init +save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type) +{ + range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10); + range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10); + range_state[reg].type = type; +} + +static void __init +set_var_mtrr_all(unsigned int address_bits) +{ + unsigned long basek, sizek; + unsigned char type; + unsigned int reg; + + for (reg = 0; reg < num_var_ranges; reg++) { + basek = range_state[reg].base_pfn << (PAGE_SHIFT - 10); + sizek = range_state[reg].size_pfn << (PAGE_SHIFT - 10); + type = range_state[reg].type; + + set_var_mtrr(reg, basek, sizek, type, address_bits); + } +} + static unsigned int __init range_to_mtrr(unsigned int reg, unsigned long range_startk, - unsigned long range_sizek, unsigned char type, - unsigned address_bits) + unsigned long range_sizek, unsigned char type) { if (!range_sizek || (reg >= num_var_ranges)) return reg; @@ -803,12 +912,13 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - printk(KERN_INFO "Setting variable MTRR %d, base: %ldMB, range: %ldMB, type %s\n", + printk(KERN_DEBUG "Setting variable MTRR %d, base: %ldMB, " + "range: %ldMB, type %s\n", reg, range_startk >> 10, sizek >> 10, (type == MTRR_TYPE_UNCACHABLE)?"UC": ((type == MTRR_TYPE_WRBACK)?"WB":"Other") ); - set_var_mtrr(reg++, range_startk, sizek, type, address_bits); + save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; if (reg >= num_var_ranges) @@ -817,10 +927,12 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, return reg; } -static void __init -range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +static unsigned __init +range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, + unsigned long sizek) { unsigned long hole_basek, hole_sizek; + unsigned long second_basek, second_sizek; unsigned long range0_basek, range0_sizek; unsigned long range_basek, range_sizek; unsigned long chunk_sizek; @@ -828,64 +940,95 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) hole_basek = 0; hole_sizek = 0; + second_basek = 0; + second_sizek = 0; chunk_sizek = state->chunk_sizek; gran_sizek = state->gran_sizek; /* align with gran size, prevent small block used up MTRRs */ range_basek = ALIGN(state->range_startk, gran_sizek); if ((range_basek > basek) && basek) - return; - range_sizek = ALIGN(state->range_sizek - (range_basek - state->range_startk), gran_sizek); + return second_sizek; + state->range_sizek -= (range_basek - state->range_startk); + range_sizek = ALIGN(state->range_sizek, gran_sizek); - while (range_basek + range_sizek > (state->range_startk + state->range_sizek)) { + while (range_sizek > state->range_sizek) { range_sizek -= gran_sizek; if (!range_sizek) - return; + return 0; } - state->range_startk = range_basek; state->range_sizek = range_sizek; /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); if (range0_sizek == state->range_sizek) { - printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range0_basek, - state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); - return; - } else if (basek) { - while (range0_basek + range0_sizek - chunk_sizek > basek) { + printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", range0_basek<<10, + (range0_basek + state->range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + state->range_sizek, MTRR_TYPE_WRBACK); + return 0; + } + + range0_sizek -= chunk_sizek; + if (range0_sizek && sizek) { + while (range0_basek + range0_sizek > (basek + sizek)) { range0_sizek -= chunk_sizek; if (!range0_sizek) break; } } + if (range0_sizek) { + printk(KERN_DEBUG "range0: %016lx - %016lx\n", range0_basek<<10, + (range0_basek + range0_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + range0_sizek, MTRR_TYPE_WRBACK); - if (range0_sizek > chunk_sizek) - range0_sizek -= chunk_sizek; - printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range0_basek, - range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); + } range_basek = range0_basek + range0_sizek; range_sizek = chunk_sizek; - if ((range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) && - (range_basek + range_sizek <= basek)) { - hole_sizek = range_sizek - (state->range_sizek - range0_sizek); - hole_basek = range_basek + range_sizek - hole_sizek; - } else + if (range_basek + range_sizek > basek && + range_basek + range_sizek <= (basek + sizek)) { + /* one hole */ + second_basek = basek; + second_sizek = range_basek + range_sizek - basek; + } + + /* if last piece, only could one hole near end */ + if ((second_basek || !basek) && + range_sizek - (state->range_sizek - range0_sizek) - second_sizek < + (chunk_sizek >> 1)) { + /* + * one hole in middle (second_sizek is 0) or at end + * (second_sizek is 0 ) + */ + hole_sizek = range_sizek - (state->range_sizek - range0_sizek) + - second_sizek; + hole_basek = range_basek + range_sizek - hole_sizek + - second_sizek; + } else { + /* fallback for big hole, or several holes */ range_sizek = state->range_sizek - range0_sizek; + second_basek = 0; + second_sizek = 0; + } - printk(KERN_INFO "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range_basek, - range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, + (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, + MTRR_TYPE_WRBACK); if (hole_sizek) { - printk(KERN_INFO "hole: %016lx - %016lx\n", hole_basek<<10, (hole_basek + hole_sizek)<<10); - state->reg = range_to_mtrr(state->reg, hole_basek, - hole_sizek, MTRR_TYPE_UNCACHABLE, state->address_bits); + printk(KERN_DEBUG "hole: %016lx - %016lx\n", hole_basek<<10, + (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, + MTRR_TYPE_UNCACHABLE); + } + + return second_sizek; } static void __init @@ -893,6 +1036,7 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) { unsigned long basek, sizek; + unsigned long second_sizek = 0; if (state->reg >= num_var_ranges) return; @@ -901,21 +1045,19 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, sizek = size_pfn << (PAGE_SHIFT - 10); /* See if I can merge with the last range */ - if ((basek <= 1024) || (state->range_startk + state->range_sizek == basek)) { + if ((basek <= 1024) || + (state->range_startk + state->range_sizek == basek)) { unsigned long endk = basek + sizek; state->range_sizek = endk - state->range_startk; return; } /* Write the range mtrrs */ - if (state->range_sizek != 0) { - range_to_mtrr_with_hole(state, basek); + if (state->range_sizek != 0) + second_sizek = range_to_mtrr_with_hole(state, basek, sizek); - state->range_startk = 0; - state->range_sizek = 0; - } /* Allocate an msr */ - state->range_startk = basek; - state->range_sizek = sizek; + state->range_startk = basek + second_sizek; + state->range_sizek = sizek - second_sizek; } /* mininum size of mtrr block that can take hole */ @@ -931,7 +1073,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p) early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); /* granity of mtrr of block */ -static u64 mtrr_gran_size __initdata = (1ULL<<20); +static u64 mtrr_gran_size __initdata; static int __init parse_mtrr_gran_size_opt(char *p) { @@ -942,91 +1084,84 @@ static int __init parse_mtrr_gran_size_opt(char *p) } early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); -static void __init +static int nr_mtrr_spare_reg __initdata = + CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT; + +static int __init parse_mtrr_spare_reg(char *arg) +{ + if (arg) + nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0); + return 0; +} + +early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg); + +static int __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, - unsigned address_bits) + u64 chunk_size, u64 gran_size) { struct var_mtrr_state var_state; int i; + int num_reg; var_state.range_startk = 0; var_state.range_sizek = 0; var_state.reg = 0; - var_state.address_bits = address_bits; - var_state.chunk_sizek = mtrr_chunk_size >> 10; - var_state.gran_sizek = mtrr_gran_size >> 10; + var_state.chunk_sizek = chunk_size >> 10; + var_state.gran_sizek = gran_size >> 10; + + memset(range_state, 0, sizeof(range_state)); /* Write the range etc */ for (i = 0; i < nr_range; i++) - set_var_mtrr_range(&var_state, range[i].start, range[i].end - range[i].start + 1); + set_var_mtrr_range(&var_state, range[i].start, + range[i].end - range[i].start + 1); /* Write the last range */ - range_to_mtrr_with_hole(&var_state, 0); - printk(KERN_INFO "DONE variable MTRRs\n"); + if (var_state.range_sizek != 0) + range_to_mtrr_with_hole(&var_state, 0, 0); + printk(KERN_DEBUG "DONE variable MTRRs\n"); + + num_reg = var_state.reg; /* Clear out the extra MTRR's */ while (var_state.reg < num_var_ranges) { - set_var_mtrr(var_state.reg, 0, 0, 0, var_state.address_bits); + save_var_mtrr(var_state.reg, 0, 0, 0); var_state.reg++; } -} - -static int __init -x86_get_mtrr_mem_range(struct res_range *range, int nr_range, - unsigned long extra_remove_base, - unsigned long extra_remove_size) -{ - unsigned long i, base, size; - mtrr_type type; - - for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); - if (type != MTRR_TYPE_WRBACK) - continue; - nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); - } - printk(KERN_INFO "After WB checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); - /* take out UC ranges */ - for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); - if (type != MTRR_TYPE_UNCACHABLE) - continue; - if (!size) - continue; - subtract_range(range, base, base + size - 1); - } - if (extra_remove_size) - subtract_range(range, extra_remove_base, extra_remove_base + extra_remove_size - 1); + return num_reg; +} - /* get new range num */ - nr_range = 0; - for (i = 0; i < RANGE_NUM; i++) { - if (!range[i].end) - continue; - nr_range++; - } - printk(KERN_INFO "After UC checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); +struct mtrr_cleanup_result { + unsigned long gran_sizek; + unsigned long chunk_sizek; + unsigned long lose_cover_sizek; + unsigned int num_reg; + int bad; +}; - /* sort the ranges */ - sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); - printk(KERN_INFO "After sorting\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); +/* + * gran_size: 1M, 2M, ..., 2G + * chunk size: gran_size, ..., 4G + * so we need (2+13)*6 + */ +#define NUM_RESULT 90 +#define PSHIFT (PAGE_SHIFT - 10) - return nr_range; -} +static struct mtrr_cleanup_result __initdata result[NUM_RESULT]; +static struct res_range __initdata range_new[RANGE_NUM]; +static unsigned long __initdata min_loss_pfn[RANGE_NUM]; static int __init mtrr_cleanup(unsigned address_bits) { unsigned long extra_remove_base, extra_remove_size; unsigned long i, base, size, def, dummy; - struct res_range range[RANGE_NUM]; mtrr_type type; - int nr_range; + int nr_range, nr_range_new; + u64 chunk_size, gran_size; + unsigned long range_sums, range_sums_new; + int index_good; + int num_reg_good; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1038,10 +1173,20 @@ static int __init mtrr_cleanup(unsigned address_bits) if (def != MTRR_TYPE_UNCACHABLE) return 0; + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } + /* check entries number */ memset(num, 0, sizeof(num)); for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); + type = range_state[i].type; + size = range_state[i].size_pfn; if (type >= MTRR_NUM_TYPES) continue; if (!size) @@ -1062,15 +1207,172 @@ static int __init mtrr_cleanup(unsigned address_bits) extra_remove_size = 0; if (mtrr_tom2) { extra_remove_base = 1 << (32 - PAGE_SHIFT); - extra_remove_size = (mtrr_tom2>>PAGE_SHIFT) - extra_remove_base; + extra_remove_size = + (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base; + } + nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, + extra_remove_size); + range_sums = sum_ranges(range, nr_range); + printk(KERN_INFO "total RAM coverred: %ldM\n", + range_sums >> (20 - PAGE_SHIFT)); + + if (mtrr_chunk_size && mtrr_gran_size) { + int num_reg; + + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, + mtrr_gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, + extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + i = 0; + result[i].chunk_sizek = mtrr_chunk_size >> 10; + result[i].gran_sizek = mtrr_gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + printk(KERN_INFO " %sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?" BAD ":"", result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + result[i].num_reg, result[i].bad?"-":"", + result[i].lose_cover_sizek >> 10); + if (!result[i].bad) { + set_var_mtrr_all(address_bits); + return 1; + } + printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " + "will find optimal one\n"); + memset(result, 0, sizeof(result[0])); + } + + i = 0; + memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn)); + memset(result, 0, sizeof(result)); + for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) { + for (chunk_size = gran_size; chunk_size < (1ULL<<33); + chunk_size <<= 1) { + int num_reg; + + printk(KERN_INFO + "\ngran_size: %lldM chunk_size_size: %lldM\n", + gran_size >> 20, chunk_size >> 20); + if (i >= NUM_RESULT) + continue; + + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, + chunk_size, gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + result[i].chunk_sizek = chunk_size >> 10; + result[i].gran_sizek = gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + /* double check it */ + if (!result[i].bad && !result[i].lose_cover_sizek) { + if (nr_range_new != nr_range || + memcmp(range, range_new, sizeof(range))) + result[i].bad = 1; + } + + if (!result[i].bad && (range_sums - range_sums_new < + min_loss_pfn[num_reg])) { + min_loss_pfn[num_reg] = + range_sums - range_sums_new; + } + i++; + } } - nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); - /* convert ranges to var ranges state */ - x86_setup_var_mtrrs(range, nr_range, address_bits); + /* print out all */ + for (i = 0; i < NUM_RESULT; i++) { + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + result[i].num_reg, result[i].bad?"-":"", + result[i].lose_cover_sizek >> 10); + } - return 1; + /* try to find the optimal index */ + if (nr_mtrr_spare_reg >= num_var_ranges) + nr_mtrr_spare_reg = num_var_ranges - 1; + num_reg_good = -1; + for (i = 1; i < num_var_ranges + 1 - nr_mtrr_spare_reg; i++) { + if (!min_loss_pfn[i]) { + num_reg_good = i; + break; + } + } + + index_good = -1; + if (num_reg_good != -1) { + for (i = 0; i < NUM_RESULT; i++) { + if (!result[i].bad && + result[i].num_reg == num_reg_good && + !result[i].lose_cover_sizek) { + index_good = i; + break; + } + } + } + + if (index_good != -1) { + printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); + i = index_good; + printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", + result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %ldM \n", + result[i].num_reg, + result[i].lose_cover_sizek >> 10); + /* convert ranges to var ranges state */ + chunk_size = result[i].chunk_sizek; + chunk_size <<= 10; + gran_size = result[i].gran_sizek; + gran_size <<= 10; + x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); + set_var_mtrr_all(address_bits); + return 1; + } + + printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n"); + printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n"); + + return 0; } +#else +static int __init mtrr_cleanup(unsigned address_bits) +{ + return 0; +} +#endif + +static int __initdata changed_by_mtrr_cleanup; static int disable_mtrr_trim; @@ -1111,7 +1413,8 @@ int __init amd_special_default_mtrr(void) return 0; } -static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) +static u64 __init real_trim_memory(unsigned long start_pfn, + unsigned long limit_pfn) { u64 trim_start, trim_size; trim_start = start_pfn; @@ -1138,9 +1441,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) { unsigned long i, base, size, highest_pfn = 0, def, dummy; mtrr_type type; - struct res_range range[RANGE_NUM]; int nr_range; - u64 total_real_trim_size; + u64 total_trim_size; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1155,11 +1457,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) if (def != MTRR_TYPE_UNCACHABLE) return 0; - /* Find highest cached pfn */ + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); for (i = 0; i < num_var_ranges; i++) { mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } + + /* Find highest cached pfn */ + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; if (type != MTRR_TYPE_WRBACK) continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; if (highest_pfn < base + size) highest_pfn = base + size; } @@ -1177,9 +1490,10 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) /* check entries number */ memset(num, 0, sizeof(num)); for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); + type = range_state[i].type; if (type >= MTRR_NUM_TYPES) continue; + size = range_state[i].size_pfn; if (!size) type = MTRR_NUM_TYPES; num[type]++; @@ -1205,26 +1519,28 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) } nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); - total_real_trim_size = 0; + total_trim_size = 0; /* check the head */ if (range[0].start) - total_real_trim_size += real_trim_memory(0, range[0].start); + total_trim_size += real_trim_memory(0, range[0].start); /* check the holes */ for (i = 0; i < nr_range - 1; i++) { if (range[i].end + 1 < range[i+1].start) - total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); + total_trim_size += real_trim_memory(range[i].end + 1, + range[i+1].start); } /* check the top */ i = nr_range - 1; if (range[i].end + 1 < end_pfn) - total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); + total_trim_size += real_trim_memory(range[i].end + 1, + end_pfn); - if (total_real_trim_size) { + if (total_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" " all of memory, losing %lluMB of RAM.\n", - total_real_trim_size >> 20); + total_trim_size >> 20); - if (enable_mtrr_cleanup < 1) + if (!changed_by_mtrr_cleanup) WARN_ON(1); printk(KERN_INFO "update e820 for mtrr\n"); @@ -1314,8 +1630,10 @@ void __init mtrr_bp_init(void) if (use_intel()) { get_mtrr_state(); - if (mtrr_cleanup(phys_addr)) + if (mtrr_cleanup(phys_addr)) { + changed_by_mtrr_cleanup = 1; mtrr_if->set_all(); + } } } @@ -1355,7 +1673,7 @@ static int __init mtrr_init_finialize(void) if (!mtrr_if) return 0; if (use_intel()) { - if (enable_mtrr_cleanup < 1) + if (!changed_by_mtrr_cleanup) mtrr_state_warn(); } else { /* The CPUs haven't MTRR and seem to not support SMP. They have -- cgit v1.2.1 From 833e78bfeeef628f0201349a0a05a54f48f07884 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 5 May 2008 15:57:38 -0700 Subject: x86: process fam 10h like k8 with fixed mtrr setting otherwise fixed MTRR for family 10h may not be changed. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 5aae648600bf..a83f5cd78885 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -342,7 +342,7 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords) if (lo != msrwords[0] || hi != msrwords[1]) { if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 15 && + (boot_cpu_data.x86 >= 0x0f && boot_cpu_data.x86 <= 0x11) && ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK)) k8_enable_fixed_iorrs(); mtrr_wrmsr(msr, msrwords[0], msrwords[1]); -- cgit v1.2.1 From b79cd8f1268bab57ff85b19d131f7f23deab2dee Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 11 May 2008 00:30:15 -0700 Subject: x86: make e820.c to have common functions remove the duplicated copy of these functions. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 475 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 411 +-------------------------------------- arch/x86/kernel/e820_64.c | 444 ------------------------------------------ arch/x86/kernel/setup_32.c | 2 +- 5 files changed, 482 insertions(+), 852 deletions(-) create mode 100644 arch/x86/kernel/e820.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..5369a4e36f17 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -22,7 +22,7 @@ obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o -obj-y += bootflag.o e820_$(BITS).o +obj-y += bootflag.o e820_$(BITS).o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o obj-$(CONFIG_X86_64) += bugs_64.o diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c new file mode 100644 index 000000000000..2cb686f60d0d --- /dev/null +++ b/arch/x86/kernel/e820.c @@ -0,0 +1,475 @@ +/* + * Handle the memory map. + * The functions here do the job until bootmem takes over. + * + * Getting sanitize_e820_map() in sync with i386 version by applying change: + * - Provisions for empty E820 memory regions (reported by certain BIOSes). + * Alex Achenbach , December 2002. + * Venkatesh Pallipadi + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +struct e820map e820; + +/* For PCI or other memory-mapped resources */ +unsigned long pci_mem_start = 0xaeedbabe; +#ifdef CONFIG_PCI +EXPORT_SYMBOL(pci_mem_start); +#endif + +/* + * This function checks if any part of the range is mapped + * with type. + */ +int +e820_any_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(e820_any_mapped); + +/* + * This function checks if the entire range is mapped with type. + * + * Note: this function only works correct if the e820 table is sorted and + * not-overlapping, which is the case + */ +int __init e820_all_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + /* is the region (part) in overlap with the current region ?*/ + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + + /* if the region is at the beginning of we move + * start to the end of the region since it's ok until there + */ + if (ei->addr <= start) + start = ei->addr + ei->size; + /* + * if start is now at or beyond end, we're done, full + * coverage + */ + if (start >= end) + return 1; + } + return 0; +} + +/* + * Add a memory region to the kernel e820 map. + */ +void __init add_memory_region(u64 start, u64 size, int type) +{ + int x = e820.nr_map; + + if (x == E820MAX) { + printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + return; + } + + e820.map[x].addr = start; + e820.map[x].size = size; + e820.map[x].type = type; + e820.nr_map++; +} + +void __init e820_print_map(char *who) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + printk(KERN_INFO " %s: %016Lx - %016Lx ", who, + (unsigned long long) e820.map[i].addr, + (unsigned long long) + (e820.map[i].addr + e820.map[i].size)); + switch (e820.map[i].type) { + case E820_RAM: + printk(KERN_CONT "(usable)\n"); + break; + case E820_RESERVED: + printk(KERN_CONT "(reserved)\n"); + break; + case E820_ACPI: + printk(KERN_CONT "(ACPI data)\n"); + break; + case E820_NVS: + printk(KERN_CONT "(ACPI NVS)\n"); + break; + default: + printk(KERN_CONT "type %u\n", e820.map[i].type); + break; + } + } +} + +/* + * Sanitize the BIOS e820 map. + * + * Some e820 responses include overlapping entries. The following + * replaces the original e820 map with a new one, removing overlaps. + * + */ +int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) +{ + struct change_member { + struct e820entry *pbios; /* pointer to original bios entry */ + unsigned long long addr; /* address for this change point */ + }; + static struct change_member change_point_list[2*E820MAX] __initdata; + static struct change_member *change_point[2*E820MAX] __initdata; + static struct e820entry *overlap_list[E820MAX] __initdata; + static struct e820entry new_bios[E820MAX] __initdata; + struct change_member *change_tmp; + unsigned long current_type, last_type; + unsigned long long last_addr; + int chgidx, still_changing; + int overlap_entries; + int new_bios_entry; + int old_nr, new_nr, chg_nr; + int i; + + /* + Visually we're performing the following + (1,2,3,4 = memory types)... + + Sample memory map (w/overlaps): + ____22__________________ + ______________________4_ + ____1111________________ + _44_____________________ + 11111111________________ + ____________________33__ + ___________44___________ + __________33333_________ + ______________22________ + ___________________2222_ + _________111111111______ + _____________________11_ + _________________4______ + + Sanitized equivalent (no overlap): + 1_______________________ + _44_____________________ + ___1____________________ + ____22__________________ + ______11________________ + _________1______________ + __________3_____________ + ___________44___________ + _____________33_________ + _______________2________ + ________________1_______ + _________________4______ + ___________________2____ + ____________________33__ + ______________________4_ + */ + + /* if there's only one memory region, don't bother */ + if (*pnr_map < 2) + return -1; + + old_nr = *pnr_map; + + /* bail out if we find any unreasonable addresses in bios map */ + for (i = 0; i < old_nr; i++) + if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) + return -1; + + /* create pointers for initial change-point information (for sorting) */ + for (i = 0; i < 2 * old_nr; i++) + change_point[i] = &change_point_list[i]; + + /* record all known change-points (starting and ending addresses), + omitting those that are for empty memory regions */ + chgidx = 0; + for (i = 0; i < old_nr; i++) { + if (biosmap[i].size != 0) { + change_point[chgidx]->addr = biosmap[i].addr; + change_point[chgidx++]->pbios = &biosmap[i]; + change_point[chgidx]->addr = biosmap[i].addr + + biosmap[i].size; + change_point[chgidx++]->pbios = &biosmap[i]; + } + } + chg_nr = chgidx; + + /* sort change-point list by memory addresses (low -> high) */ + still_changing = 1; + while (still_changing) { + still_changing = 0; + for (i = 1; i < chg_nr; i++) { + unsigned long long curaddr, lastaddr; + unsigned long long curpbaddr, lastpbaddr; + + curaddr = change_point[i]->addr; + lastaddr = change_point[i - 1]->addr; + curpbaddr = change_point[i]->pbios->addr; + lastpbaddr = change_point[i - 1]->pbios->addr; + + /* + * swap entries, when: + * + * curaddr > lastaddr or + * curaddr == lastaddr and curaddr == curpbaddr and + * lastaddr != lastpbaddr + */ + if (curaddr < lastaddr || + (curaddr == lastaddr && curaddr == curpbaddr && + lastaddr != lastpbaddr)) { + change_tmp = change_point[i]; + change_point[i] = change_point[i-1]; + change_point[i-1] = change_tmp; + still_changing = 1; + } + } + } + + /* create a new bios memory map, removing overlaps */ + overlap_entries = 0; /* number of entries in the overlap table */ + new_bios_entry = 0; /* index for creating new bios map entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ + + /* loop through change-points, determining affect on the new bios map */ + for (chgidx = 0; chgidx < chg_nr; chgidx++) { + /* keep track of all overlapping bios entries */ + if (change_point[chgidx]->addr == + change_point[chgidx]->pbios->addr) { + /* + * add map entry to overlap list (> 1 entry + * implies an overlap) + */ + overlap_list[overlap_entries++] = + change_point[chgidx]->pbios; + } else { + /* + * remove entry from list (order independent, + * so swap with last) + */ + for (i = 0; i < overlap_entries; i++) { + if (overlap_list[i] == + change_point[chgidx]->pbios) + overlap_list[i] = + overlap_list[overlap_entries-1]; + } + overlap_entries--; + } + /* + * if there are overlapping entries, decide which + * "type" to use (larger value takes precedence -- + * 1=usable, 2,3,4,4+=unusable) + */ + current_type = 0; + for (i = 0; i < overlap_entries; i++) + if (overlap_list[i]->type > current_type) + current_type = overlap_list[i]->type; + /* + * continue building up new bios map based on this + * information + */ + if (current_type != last_type) { + if (last_type != 0) { + new_bios[new_bios_entry].size = + change_point[chgidx]->addr - last_addr; + /* + * move forward only if the new size + * was non-zero + */ + if (new_bios[new_bios_entry].size != 0) + /* + * no more space left for new + * bios entries ? + */ + if (++new_bios_entry >= E820MAX) + break; + } + if (current_type != 0) { + new_bios[new_bios_entry].addr = + change_point[chgidx]->addr; + new_bios[new_bios_entry].type = current_type; + last_addr = change_point[chgidx]->addr; + } + last_type = current_type; + } + } + /* retain count for new bios entries */ + new_nr = new_bios_entry; + + /* copy new bios mapping into original location */ + memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); + *pnr_map = new_nr; + + return 0; +} + +/* + * Copy the BIOS e820 map into a safe place. + * + * Sanity-check it while we're at it.. + * + * If we're lucky and live on a modern system, the setup code + * will have given us a memory map that we can use to properly + * set up memory. If we aren't, we'll fake a memory map. + */ +int __init copy_e820_map(struct e820entry *biosmap, int nr_map) +{ + /* Only one memory region (or negative)? Ignore it */ + if (nr_map < 2) + return -1; + + do { + u64 start = biosmap->addr; + u64 size = biosmap->size; + u64 end = start + size; + u32 type = biosmap->type; + + /* Overflow in 64 bits? Ignore the memory map. */ + if (start > end) + return -1; + + add_memory_region(start, size, type); + } while (biosmap++, --nr_map); + return 0; +} + +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, + unsigned new_type) +{ + int i; + u64 real_updated_size = 0; + + BUG_ON(old_type == new_type); + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 final_start, final_end; + if (ei->type != old_type) + continue; + /* totally covered? */ + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { + ei->type = new_type; + real_updated_size += ei->size; + continue; + } + /* partially covered */ + final_start = max(start, ei->addr); + final_end = min(start + size, ei->addr + ei->size); + if (final_start >= final_end) + continue; + add_memory_region(final_start, final_end - final_start, + new_type); + real_updated_size += final_end - final_start; + } + return real_updated_size; +} + +void __init update_e820(void) +{ + u8 nr_map; + + nr_map = e820.nr_map; + if (sanitize_e820_map(e820.map, &nr_map)) + return; + e820.nr_map = nr_map; + printk(KERN_INFO "modified physical RAM map:\n"); + e820_print_map("modified"); +} + +/* + * Search for the biggest gap in the low 32 bits of the e820 + * memory space. We pass this space to PCI to assign MMIO resources + * for hotplug or unconfigured devices in. + * Hopefully the BIOS let enough space left. + */ +__init void e820_setup_gap(void) +{ + unsigned long gapstart, gapsize, round; + unsigned long long last; + int i; + int found = 0; + + last = 0x100000000ull; + gapstart = 0x10000000; + gapsize = 0x400000; + i = e820.nr_map; + while (--i >= 0) { + unsigned long long start = e820.map[i].addr; + unsigned long long end = start + e820.map[i].size; + + /* + * Since "last" is at most 4GB, we know we'll + * fit in 32 bits if this condition is true + */ + if (last > end) { + unsigned long gap = last - end; + + if (gap > gapsize) { + gapsize = gap; + gapstart = end; + found = 1; + } + } + if (start < last) + last = start; + } + +#ifdef CONFIG_X86_64 + if (!found) { + gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; + printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " + "address range\n" + KERN_ERR "PCI: Unassigned devices with 32bit resource " + "registers may break!\n"); + } +#endif + + /* + * See how much we want to round up: start off with + * rounding to the next 1MB area. + */ + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; + + printk(KERN_INFO + "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", + pci_mem_start, gapstart, gapsize); +} + diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 751d517d802c..dfe25751038b 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -16,21 +16,6 @@ #include #include -struct e820map e820; -struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ -}; -static struct change_member change_point_list[2*E820MAX] __initdata; -static struct change_member *change_point[2*E820MAX] __initdata; -static struct e820entry *overlap_list[E820MAX] __initdata; -static struct e820entry new_bios[E820MAX] __initdata; -/* For PCI or other memory-mapped resources */ -unsigned long pci_mem_start = 0x10000000; -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_mem_start); -#endif - static struct resource system_rom_resource = { .name = "System ROM", .start = 0xf0000, @@ -254,223 +239,6 @@ void __init e820_mark_nosave_regions(void) } #endif -void __init add_memory_region(unsigned long long start, - unsigned long long size, int type) -{ - int x; - - x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} /* add_memory_region */ - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) -{ - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) { - return -1; - } - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i=0; iaddr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; /* true number of change-points */ - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i=1; i < chg_nr; i++) { - /* if > , swap */ - /* or, if current= & last=, swap */ - if ((change_point[i]->addr < change_point[i-1]->addr) || - ((change_point[i]->addr == change_point[i-1]->addr) && - (change_point[i]->addr == change_point[i]->pbios->addr) && - (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) - ) - { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing=1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries=0; /* number of entries in the overlap table */ - new_bios_entry=0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - /* loop through change-points, determining affect on the new bios map */ - for (chgidx=0; chgidx < chg_nr; chgidx++) - { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) - { - /* add map entry to overlap list (> 1 entry implies an overlap) */ - overlap_list[overlap_entries++]=change_point[chgidx]->pbios; - } - else - { - /* remove entry from list (order independent, so swap with last) */ - for (i=0; ipbios) - overlap_list[i] = overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* if there are overlapping entries, decide which "type" to use */ - /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ - current_type = 0; - for (i=0; itype > current_type) - current_type = overlap_list[i]->type; - /* continue building up new bios map based on this information */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* move forward only if the new size was non-zero */ - if (new_bios[new_bios_entry].size != 0) - if (++new_bios_entry >= E820MAX) - break; /* no more space left for new bios entries */ - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr=change_point[chgidx]->addr; - } - last_type = current_type; - } - } - new_nr = new_bios_entry; /* retain count for new bios entries */ - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - * - * We check to see that the memory map contains at least 2 elements - * before we'll use it, because the detection code in setup.S may - * not be perfect and most every PC known to man has two memory - * regions: one from 0 to 640k, and one from 1mb up. (The IBM - * thinkpad 560x, for example, does not cooperate with the memory - * detection code.) - */ -int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - - return 0; -} - /* * Find the highest page frame number we have available */ @@ -535,86 +303,12 @@ void __init register_bootmem_low_pages(unsigned long max_low_pfn) } } -void __init e820_register_memory(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long long last; - int i; - - /* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. - */ - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - } - } - if (start < last) - last = start; - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", - pci_mem_start, gapstart, gapsize); -} - -static void __init print_memory_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(" %s: %016Lx - %016Lx ", who, - e820.map[i].addr, - e820.map[i].addr + e820.map[i].size); - switch (e820.map[i].type) { - case E820_RAM: printk("(usable)\n"); - break; - case E820_RESERVED: - printk("(reserved)\n"); - break; - case E820_ACPI: - printk("(ACPI data)\n"); - break; - case E820_NVS: - printk("(ACPI NVS)\n"); - break; - default: printk("type %u\n", e820.map[i].type); - break; - } - } -} - void __init limit_regions(unsigned long long size) { unsigned long long current_addr; int i; - print_memory_map("limit_regions start"); + e820_print_map("limit_regions start"); for (i = 0; i < e820.nr_map; i++) { current_addr = e820.map[i].addr + e820.map[i].size; if (current_addr < size) @@ -633,62 +327,10 @@ void __init limit_regions(unsigned long long size) e820.nr_map = i + 1; e820.map[i].size -= current_addr - size; } - print_memory_map("limit_regions endfor"); + e820_print_map("limit_regions endfor"); return; } - print_memory_map("limit_regions endfunc"); -} - -/* - * This function checks if any part of the range is mapped - * with type. - */ -int -e820_any_mapped(u64 start, u64 end, unsigned type) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - const struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - - /* - * This function checks if the entire range is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init -e820_all_mapped(unsigned long s, unsigned long e, unsigned type) -{ - u64 start = s; - u64 end = e; - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - /* if the region is at the beginning of we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* if start is now at or beyond end, we're done, full - * coverage */ - if (start >= end) - return 1; /* we're done */ - } - return 0; + e820_print_map("limit_regions endfunc"); } /* Overridden in paravirt.c if CONFIG_PARAVIRT */ @@ -700,7 +342,7 @@ char * __init __attribute__((weak)) memory_setup(void) void __init setup_memory_map(void) { printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - print_memory_map(memory_setup()); + e820_print_map(memory_setup()); } static int __initdata user_defined_memmap; @@ -783,55 +425,12 @@ static int __init parse_memmap(char *arg) return 0; } early_param("memmap", parse_memmap); -u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - u64 real_updated_size = 0; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && - (ei->addr + ei->size) <= (start + size)) { - ei->type = new_type; - real_updated_size += ei->size; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - real_updated_size += final_end - final_start; - } - - return real_updated_size; -} void __init finish_e820_parsing(void) { if (user_defined_memmap) { printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); + e820_print_map("user"); } } -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - print_memory_map("modified"); -} diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index c45b4dea4055..28a14eb65d3d 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -29,8 +29,6 @@ #include #include -struct e820map e820; - /* * PFN of last memory page. */ @@ -176,62 +174,6 @@ again: } return changed; } -/* - * This function checks if any part of the range is mapped - * with type. - */ -int -e820_any_mapped(unsigned long start, unsigned long end, unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - -/* - * This function checks if the entire range is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init e820_all_mapped(unsigned long start, unsigned long end, - unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - - /* if the region is at the beginning of we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* - * if start is now at or beyond end, we're done, full - * coverage - */ - if (start >= end) - return 1; - } - return 0; -} /* * Find a free area with specified alignment in a specific range. @@ -434,24 +376,6 @@ e820_register_active_regions(int nid, unsigned long start_pfn, add_active_range(nid, ei_startpfn, ei_endpfn); } -/* - * Add a memory region to the kernel e820 map. - */ -void __init add_memory_region(unsigned long start, unsigned long size, int type) -{ - int x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} - /* * Find the hole size (in bytes) in the memory range. * @start: starting address of the memory range to scan @@ -473,266 +397,6 @@ unsigned long __init e820_hole_size(unsigned long start, unsigned long end) return end - start - (ram << PAGE_SHIFT); } -static void __init e820_print_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(KERN_INFO " %s: %016Lx - %016Lx ", who, - (unsigned long long) e820.map[i].addr, - (unsigned long long) - (e820.map[i].addr + e820.map[i].size)); - switch (e820.map[i].type) { - case E820_RAM: - printk(KERN_CONT "(usable)\n"); - break; - case E820_RESERVED: - printk(KERN_CONT "(reserved)\n"); - break; - case E820_ACPI: - printk(KERN_CONT "(ACPI data)\n"); - break; - case E820_NVS: - printk(KERN_CONT "(ACPI NVS)\n"); - break; - default: - printk(KERN_CONT "type %u\n", e820.map[i].type); - break; - } - } -} - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) -{ - struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ - }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following - (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) - return -1; - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i = 0; i < old_nr; i++) - if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) - return -1; - - /* create pointers for initial change-point information (for sorting) */ - for (i = 0; i < 2 * old_nr; i++) - change_point[i] = &change_point_list[i]; - - /* record all known change-points (starting and ending addresses), - omitting those that are for empty memory regions */ - chgidx = 0; - for (i = 0; i < old_nr; i++) { - if (biosmap[i].size != 0) { - change_point[chgidx]->addr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + - biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i = 1; i < chg_nr; i++) { - unsigned long long curaddr, lastaddr; - unsigned long long curpbaddr, lastpbaddr; - - curaddr = change_point[i]->addr; - lastaddr = change_point[i - 1]->addr; - curpbaddr = change_point[i]->pbios->addr; - lastpbaddr = change_point[i - 1]->pbios->addr; - - /* - * swap entries, when: - * - * curaddr > lastaddr or - * curaddr == lastaddr and curaddr == curpbaddr and - * lastaddr != lastpbaddr - */ - if (curaddr < lastaddr || - (curaddr == lastaddr && curaddr == curpbaddr && - lastaddr != lastpbaddr)) { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing = 1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries = 0; /* number of entries in the overlap table */ - new_bios_entry = 0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - - /* loop through change-points, determining affect on the new bios map */ - for (chgidx = 0; chgidx < chg_nr; chgidx++) { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == - change_point[chgidx]->pbios->addr) { - /* - * add map entry to overlap list (> 1 entry - * implies an overlap) - */ - overlap_list[overlap_entries++] = - change_point[chgidx]->pbios; - } else { - /* - * remove entry from list (order independent, - * so swap with last) - */ - for (i = 0; i < overlap_entries; i++) { - if (overlap_list[i] == - change_point[chgidx]->pbios) - overlap_list[i] = - overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* - * if there are overlapping entries, decide which - * "type" to use (larger value takes precedence -- - * 1=usable, 2,3,4,4+=unusable) - */ - current_type = 0; - for (i = 0; i < overlap_entries; i++) - if (overlap_list[i]->type > current_type) - current_type = overlap_list[i]->type; - /* - * continue building up new bios map based on this - * information - */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* - * move forward only if the new size - * was non-zero - */ - if (new_bios[new_bios_entry].size != 0) - /* - * no more space left for new - * bios entries ? - */ - if (++new_bios_entry >= E820MAX) - break; - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = - change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr = change_point[chgidx]->addr; - } - last_type = current_type; - } - } - /* retain count for new bios entries */ - new_nr = new_bios_entry; - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - */ -static int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - return 0; -} - static void early_panic(char *msg) { early_printk(msg); @@ -829,114 +493,6 @@ void __init finish_e820_parsing(void) } } -u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - u64 real_updated_size = 0; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && - (ei->addr + ei->size) <= (start + size)) { - ei->type = new_type; - real_updated_size += ei->size; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - real_updated_size += final_end - final_start; - } - return real_updated_size; -} - -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - e820_print_map("modified"); -} - -unsigned long pci_mem_start = 0xaeedbabe; -EXPORT_SYMBOL(pci_mem_start); - -/* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. We pass this space to PCI to assign MMIO resources - * for hotplug or unconfigured devices in. - * Hopefully the BIOS let enough space left. - */ -__init void e820_setup_gap(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long last; - int i; - int found = 0; - - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - found = 1; - } - } - if (start < last) - last = start; - } - - if (!found) { - gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; - printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " - "address range\n" - KERN_ERR "PCI: Unassigned devices with 32bit resource " - "registers may break!\n"); - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk(KERN_INFO - "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", - pci_mem_start, gapstart, gapsize); -} - int __init arch_get_ram_range(int slot, u64 *addr, u64 *size) { int i; diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index b54c79c91efd..5faeab69edd9 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -875,7 +875,7 @@ void __init setup_arch(char **cmdline_p) get_smp_config(); #endif - e820_register_memory(); + e820_setup_gap(); e820_mark_nosave_regions(); #ifdef CONFIG_VT -- cgit v1.2.1 From 8004dd965b13b01a96def054d420f6df7ff22d53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 17:40:39 -0700 Subject: x86: amd opteron TOM2 mask val fix there is a typo in the mask value, need to remove that extra 0, to avoid 4bit clearing. Signed-off-by: Yinghal Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- arch/x86/pci/k8-bus_64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index a83f5cd78885..509bd3d9eacd 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -233,7 +233,7 @@ void __init get_mtrr_state(void) mtrr_tom2 = high; mtrr_tom2 <<= 32; mtrr_tom2 |= low; - mtrr_tom2 &= 0xffffff8000000ULL; + mtrr_tom2 &= 0xffffff800000ULL; } if (mtrr_show) { int high_width; diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c index 5c2799c20e47..bfefdf0f40d4 100644 --- a/arch/x86/pci/k8-bus_64.c +++ b/arch/x86/pci/k8-bus_64.c @@ -384,7 +384,7 @@ static int __init early_fill_mp_bus_info(void) /* need to take out [0, TOM) for RAM*/ address = MSR_K8_TOP_MEM1; rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); + end = (val & 0xffffff800000ULL); printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); if (end < (1ULL<<32)) update_range(range, 0, end - 1); @@ -478,7 +478,7 @@ static int __init early_fill_mp_bus_info(void) /* TOP_MEM2 */ address = MSR_K8_TOP_MEM2; rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); + end = (val & 0xffffff800000ULL); printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); update_range(range, 1ULL<<32, end - 1); } -- cgit v1.2.1 From 3f03c54a34fa3da680b3341dd3ba965ef3394bd1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 9 May 2008 22:40:52 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete layout - fix #2 disable the noisy print out. also use the one the less spare mtrr reg. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 79 +++++++++++++++++++++++++---------------- 1 file changed, 48 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index e6c162c379ac..0642201784e0 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -730,6 +730,7 @@ struct var_mtrr_range_state { }; struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; +static int __initdata debug_print; static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, @@ -748,10 +749,12 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); } - printk(KERN_DEBUG "After WB checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + if (debug_print) { + printk(KERN_DEBUG "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + } /* take out UC ranges */ for (i = 0; i < num_var_ranges; i++) { @@ -775,17 +778,21 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, continue; nr_range++; } - printk(KERN_DEBUG "After UC checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", - range[i].start, range[i].end + 1); + if (debug_print) { + printk(KERN_DEBUG "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + } /* sort the ranges */ sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); - printk(KERN_DEBUG "After sorting\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + if (debug_print) { + printk(KERN_DEBUG "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + } /* clear those is not used */ for (i = nr_range; i < RANGE_NUM; i++) @@ -912,12 +919,13 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - printk(KERN_DEBUG "Setting variable MTRR %d, base: %ldMB, " - "range: %ldMB, type %s\n", - reg, range_startk >> 10, sizek >> 10, - (type == MTRR_TYPE_UNCACHABLE)?"UC": - ((type == MTRR_TYPE_WRBACK)?"WB":"Other") - ); + if (debug_print) + printk(KERN_DEBUG "Setting variable MTRR %d, " + "base: %ldMB, range: %ldMB, type %s\n", + reg, range_startk >> 10, sizek >> 10, + (type == MTRR_TYPE_UNCACHABLE)?"UC": + ((type == MTRR_TYPE_WRBACK)?"WB":"Other") + ); save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; @@ -963,7 +971,9 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); if (range0_sizek == state->range_sizek) { - printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", range0_basek<<10, + if (debug_print) + printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", + range0_basek<<10, (range0_basek + state->range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, state->range_sizek, MTRR_TYPE_WRBACK); @@ -980,7 +990,9 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, } if (range0_sizek) { - printk(KERN_DEBUG "range0: %016lx - %016lx\n", range0_basek<<10, + if (debug_print) + printk(KERN_DEBUG "range0: %016lx - %016lx\n", + range0_basek<<10, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK); @@ -1016,13 +1028,15 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, second_sizek = 0; } - printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, + if (debug_print) + printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, MTRR_TYPE_WRBACK); if (hole_sizek) { - printk(KERN_DEBUG "hole: %016lx - %016lx\n", hole_basek<<10, - (hole_basek + hole_sizek)<<10); + if (debug_print) + printk(KERN_DEBUG "hole: %016lx - %016lx\n", + hole_basek<<10, (hole_basek + hole_sizek)<<10); state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, MTRR_TYPE_UNCACHABLE); @@ -1120,7 +1134,6 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range, /* Write the last range */ if (var_state.range_sizek != 0) range_to_mtrr_with_hole(&var_state, 0, 0); - printk(KERN_DEBUG "DONE variable MTRRs\n"); num_reg = var_state.reg; /* Clear out the extra MTRR's */ @@ -1219,6 +1232,7 @@ static int __init mtrr_cleanup(unsigned address_bits) if (mtrr_chunk_size && mtrr_gran_size) { int num_reg; + debug_print = 1; /* convert ranges to var ranges state */ num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, mtrr_gran_size); @@ -1242,8 +1256,8 @@ static int __init mtrr_cleanup(unsigned address_bits) result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT; - printk(KERN_INFO " %sgran_size: %ldM \tchunk_size: %ldM \t", - result[i].bad?" BAD ":"", result[i].gran_sizek >> 10, + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", result[i].num_reg, result[i].bad?"-":"", @@ -1254,6 +1268,7 @@ static int __init mtrr_cleanup(unsigned address_bits) } printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " "will find optimal one\n"); + debug_print = 0; memset(result, 0, sizeof(result[0])); } @@ -1265,9 +1280,10 @@ static int __init mtrr_cleanup(unsigned address_bits) chunk_size <<= 1) { int num_reg; - printk(KERN_INFO + if (debug_print) + printk(KERN_INFO "\ngran_size: %lldM chunk_size_size: %lldM\n", - gran_size >> 20, chunk_size >> 20); + gran_size >> 20, chunk_size >> 20); if (i >= NUM_RESULT) continue; @@ -1310,10 +1326,10 @@ static int __init mtrr_cleanup(unsigned address_bits) /* print out all */ for (i = 0; i < NUM_RESULT; i++) { - printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n", result[i].num_reg, result[i].bad?"-":"", result[i].lose_cover_sizek >> 10); } @@ -1322,7 +1338,7 @@ static int __init mtrr_cleanup(unsigned address_bits) if (nr_mtrr_spare_reg >= num_var_ranges) nr_mtrr_spare_reg = num_var_ranges - 1; num_reg_good = -1; - for (i = 1; i < num_var_ranges + 1 - nr_mtrr_spare_reg; i++) { + for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) { if (!min_loss_pfn[i]) { num_reg_good = i; break; @@ -1344,10 +1360,10 @@ static int __init mtrr_cleanup(unsigned address_bits) if (index_good != -1) { printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); i = index_good; - printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", + printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %ldM \n", + printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n", result[i].num_reg, result[i].lose_cover_sizek >> 10); /* convert ranges to var ranges state */ @@ -1355,6 +1371,7 @@ static int __init mtrr_cleanup(unsigned address_bits) chunk_size <<= 10; gran_size = result[i].gran_sizek; gran_size <<= 10; + debug_print = 1; x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); set_var_mtrr_all(address_bits); return 1; -- cgit v1.2.1 From e9197bf0114661195bee35e7795cfc42164d9b2c Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:10 -0700 Subject: x86 boot: remove some unused extern function declarations Remove three extern declarations for routines that don't exist. Fix a typo in a comment. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index c5066d519e5d..afb07ffb931d 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -233,7 +233,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, else bootmap_start = round_up(start, PAGE_SIZE); /* - * SMP_CAHCE_BYTES could be enough, but init_bootmem_node like + * SMP_CACHE_BYTES could be enough, but init_bootmem_node like * to use that to align to PAGE_SIZE */ bootmap = early_node_mem(nodeid, bootmap_start, end, -- cgit v1.2.1 From b25e31cec7788ccba5749d10f8f4343fffff4750 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:28 -0700 Subject: x86 boot: minor code format fixes in e820 and efi routines Standardize a few pointer declarations to not have the extra space after the '*' character. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 2 +- arch/x86/kernel/efi_64.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 28a14eb65d3d..c10b4aece5e4 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -404,7 +404,7 @@ static void early_panic(char *msg) } /* We're not void only for x86 32-bit compat */ -char * __init machine_specific_memory_setup(void) +char *__init machine_specific_memory_setup(void) { char *who = "BIOS-e820"; /* diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index d0060fdcccac..21a7b759687a 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -103,7 +103,7 @@ void __init efi_reserve_bootmem(void) memmap.nr_map * memmap.desc_size); } -void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size) +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) { static unsigned pages_mapped __initdata; unsigned i, pages; -- cgit v1.2.1 From c3965bd15118742d72b4bc1a290d37b3f081eb98 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:34 -0700 Subject: x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant This patch is motivated by a subsequent patch which will allow for more memory map entries on EFI supported systems than can be passed via the x86 legacy BIOS E820 interface. The legacy interface is limited to E820MAX == 128 memory entries, and that "E820MAX" manifest constant was used as the size for several arrays and loops over those arrays. The primary change in this patch is to change code loop sizes over those arrays from using the constant E820MAX, to using the ARRAY_SIZE() macro evaluated for the array being looped. That way, a subsequent patch can change the size of some of these arrays, without breaking this code. This patch also adds a parameter to the sanitize_e820_map() routine, which had an implicit size for the array passed it of E820MAX entries. This new parameter explicitly passes the size of said array. Once again, this will allow a subsequent patch to change that array size for some calls to sanitize_e820_map() without breaking the code. As part of enhancing the sanitize_e820_map() interface this way, I further combined the unnecessarily distinct x86_32 and x86_64 declarations for this routine into a single, commonly used, declaration. This patch in itself should make no difference to the resulting kernel binary. [ mingo@elte.hu: merged to -tip ] Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/boot/memory.c | 3 ++- arch/x86/kernel/e820.c | 9 +++++---- arch/x86/kernel/e820_64.c | 6 ++++-- arch/x86/mach-default/setup.c | 4 +++- arch/x86/mach-voyager/setup.c | 4 +++- 5 files changed, 17 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index acad32eb4290..53165c97336b 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -13,6 +13,7 @@ */ #include "boot.h" +#include #define SMAP 0x534d4150 /* ASCII "SMAP" */ @@ -53,7 +54,7 @@ static int detect_memory_e820(void) count++; desc++; - } while (next && count < E820MAX); + } while (next && count < ARRAY_SIZE(boot_params.e820_map)); return boot_params.e820_entries = count; } diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 2cb686f60d0d..2396b9da8027 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -95,7 +95,7 @@ void __init add_memory_region(u64 start, u64 size, int type) { int x = e820.nr_map; - if (x == E820MAX) { + if (x == ARRAY_SIZE(e820.map)) { printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); return; } @@ -142,7 +142,8 @@ void __init e820_print_map(char *who) * replaces the original e820 map with a new one, removing overlaps. * */ -int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) +int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, + char *pnr_map) { struct change_member { struct e820entry *pbios; /* pointer to original bios entry */ @@ -314,7 +315,7 @@ int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) * no more space left for new * bios entries ? */ - if (++new_bios_entry >= E820MAX) + if (++new_bios_entry >= max_nr_map) break; } if (current_type != 0) { @@ -403,7 +404,7 @@ void __init update_e820(void) u8 nr_map; nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) return; e820.nr_map = nr_map; printk(KERN_INFO "modified physical RAM map:\n"); diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index c10b4aece5e4..58dc6eee4d4f 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -413,7 +413,9 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); @@ -484,7 +486,7 @@ void __init finish_e820_parsing(void) if (userdef) { char nr = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr) < 0) + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) early_panic("Invalid user supplied memory map"); e820.nr_map = nr; diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 0c28a071824c..38a856c4fc07 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -163,7 +163,9 @@ char * __init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 5ae5466b9eb9..662b5c0a77d6 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -111,7 +111,9 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; -- cgit v1.2.1 From 028b785888c523baccdf27af0cdbf1deb92edec0 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:40 -0700 Subject: x86 boot: extend some internal memory map arrays to handle larger EFI input Extend internal boot time memory tables to allow for up to three entries per node, which may be larger than the 128 E820MAX entries handled by the legacy BIOS E820 interface. The EFI interface, if present, is capable of passing memory map entries for these larger node counts. This patch requires an earlier patch that rewrote code depending on these array sizes from using E820MAX explicitly to size loops, to instead using ARRAY_SIZE() of the applicable array. Another patch following this one will provide the code to pick up additional memory entries passed via the EFI interface from the BIOS and insert them in the following, now enlarged, arrays. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 2396b9da8027..3f7777b255aa 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -149,10 +149,10 @@ int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, struct e820entry *pbios; /* pointer to original bios entry */ unsigned long long addr; /* address for this change point */ }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; +static struct change_member change_point_list[2*E820_X_MAX] __initdata; +static struct change_member *change_point[2*E820_X_MAX] __initdata; +static struct e820entry *overlap_list[E820_X_MAX] __initdata; +static struct e820entry new_bios[E820_X_MAX] __initdata; struct change_member *change_tmp; unsigned long current_type, last_type; unsigned long long last_addr; -- cgit v1.2.1 From 6e9bcc796b120d17b08dde7ab958b82ddb899889 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:46 -0700 Subject: x86 boot: change sanitize_e820_map parameter from byte to int to allow bigger memory maps The map size counter passed into, and back out of, sanitize_e820_map(), was an eight bit type (char or u8), as derived from its origins in legacy BIOS E820 structures. This patch changes that type to an 'int', to allow this sanitize routine to also be used on larger maps (larger than the 256 count that fits in a char). The legacy BIOS E820 interface of course does not change; that remains at 8 bits for this count, holding up to E820MAX == 128 entries. But the kernel internals can handle more when those additional memory map entries are passed from the BIOS via EFI interfaces. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 5 +++-- arch/x86/kernel/e820_64.c | 7 +++++-- arch/x86/mach-default/setup.c | 5 ++++- arch/x86/mach-voyager/setup.c | 5 ++++- 4 files changed, 16 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 3f7777b255aa..91abf5b2fb94 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -143,7 +143,7 @@ void __init e820_print_map(char *who) * */ int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, - char *pnr_map) + int *pnr_map) { struct change_member { struct e820entry *pbios; /* pointer to original bios entry */ @@ -204,6 +204,7 @@ static struct e820entry new_bios[E820_X_MAX] __initdata; return -1; old_nr = *pnr_map; + BUG_ON(old_nr > max_nr_map); /* bail out if we find any unreasonable addresses in bios map */ for (i = 0; i < old_nr; i++) @@ -401,7 +402,7 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, void __init update_e820(void) { - u8 nr_map; + int nr_map; nr_map = e820.nr_map; if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 58dc6eee4d4f..354fbb221709 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -407,15 +407,18 @@ static void early_panic(char *msg) char *__init machine_specific_memory_setup(void) { char *who = "BIOS-e820"; + int new_nr; /* * Try to copy the BIOS-supplied E820-map. * * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); @@ -484,7 +487,7 @@ early_param("memmap", parse_memmap_opt); void __init finish_e820_parsing(void) { if (userdef) { - char nr = e820.nr_map; + int nr = e820.nr_map; if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) early_panic("Invalid user supplied memory map"); diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 38a856c4fc07..56b4c39cb7fa 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -153,6 +153,7 @@ late_initcall(print_ipi_mode); char * __init machine_specific_memory_setup(void) { char *who; + int new_nr; who = "BIOS-e820"; @@ -163,9 +164,11 @@ char * __init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 662b5c0a77d6..f4aca9fa9546 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -62,6 +62,7 @@ void __init time_init_hook(void) char *__init machine_specific_memory_setup(void) { char *who; + int new_nr; who = "NOT VOYAGER"; @@ -111,9 +112,11 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; -- cgit v1.2.1 From 5b7eb2e9ef4e467a1248537b47a63bab265be3cc Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:52 -0700 Subject: x86 boot: longer comment explaining sanitize_e820_map routine Elaborate on the comment for sanitize_e820_map(), epxlaining more what it does, what it inputs, and what it returns. Rearrange the placement of this comment to fit kernel conventions, before the routine's code rather than buried inside it. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 94 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 56 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 91abf5b2fb94..41c480ae47df 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -139,9 +139,64 @@ void __init e820_print_map(char *who) * Sanitize the BIOS e820 map. * * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. + * replaces the original e820 map with a new one, removing overlaps, + * and resolving conflicting memory types in favor of highest + * numbered type. * + * The input parameter biosmap points to an array of 'struct + * e820entry' which on entry has elements in the range [0, *pnr_map) + * valid, and which has space for up to max_nr_map entries. + * On return, the resulting sanitized e820 map entries will be in + * overwritten in the same location, starting at biosmap. + * + * The integer pointed to by pnr_map must be valid on entry (the + * current number of valid entries located at biosmap) and will + * be updated on return, with the new number of valid entries + * (something no more than max_nr_map.) + * + * The return value from sanitize_e820_map() is zero if it + * successfully 'sanitized' the map entries passed in, and is -1 + * if it did nothing, which can happen if either of (1) it was + * only passed one map entry, or (2) any of the input map entries + * were invalid (start + size < start, meaning that the size was + * so big the described memory range wrapped around through zero.) + * + * Visually we're performing the following + * (1,2,3,4 = memory types)... + * + * Sample memory map (w/overlaps): + * ____22__________________ + * ______________________4_ + * ____1111________________ + * _44_____________________ + * 11111111________________ + * ____________________33__ + * ___________44___________ + * __________33333_________ + * ______________22________ + * ___________________2222_ + * _________111111111______ + * _____________________11_ + * _________________4______ + * + * Sanitized equivalent (no overlap): + * 1_______________________ + * _44_____________________ + * ___1____________________ + * ____22__________________ + * ______11________________ + * _________1______________ + * __________3_____________ + * ___________44___________ + * _____________33_________ + * _______________2________ + * ________________1_______ + * _________________4______ + * ___________________2____ + * ____________________33__ + * ______________________4_ */ + int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map) { @@ -162,43 +217,6 @@ static struct e820entry new_bios[E820_X_MAX] __initdata; int old_nr, new_nr, chg_nr; int i; - /* - Visually we're performing the following - (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ if (*pnr_map < 2) return -1; -- cgit v1.2.1 From 69c9189320c46b14e5ae3ad4b3a0d35cc63cba20 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:58 -0700 Subject: x86 boot: add code to add BIOS provided EFI memory entries to kernel Add to the kernels boot memory map 'memmap' entries found in the EFI memory descriptors passed in from the BIOS. On EFI systems, up to E820MAX == 128 memory map entries can be passed via the legacy E820 interface (limited by the size of the 'zeropage'). These entries can be duplicated in the EFI descriptors also passed from the BIOS, and possibly more entries passed by the EFI interface, which does not have the E820MAX limit on number of memory map entries. This code doesn't worry about the likely duplicate, overlapping or (unlikely) conflicting entries between the EFI map and the E820 map. It just dumps all the EFI entries into the memmap[] array (which already has the E820 entries) and lets the existing routine sanitize_e820_map() sort the mess out. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/efi.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 77d424cf68b3..4a1a26d5931f 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -213,6 +213,31 @@ unsigned long efi_get_time(void) eft.minute, eft.second); } +/* + * Tell the kernel about the EFI memory map. This might include + * more than the max 128 entries that can fit in the e820 legacy + * (zeropage) memory map. + */ + +static void __init add_efi_memmap(void) +{ + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + efi_memory_desc_t *md = p; + unsigned long long start = md->phys_addr; + unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + int e820_type; + + if (md->attribute & EFI_MEMORY_WB) + e820_type = E820_RAM; + else + e820_type = E820_RESERVED; + add_memory_region(start, size, e820_type); + } + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); +} + #if EFI_DEBUG static void __init print_efi_memmap(void) { @@ -370,6 +395,7 @@ void __init efi_init(void) if (memmap.desc_size != sizeof(efi_memory_desc_t)) printk(KERN_WARNING "Kernel-defined memdesc" "doesn't match the one from EFI!\n"); + add_efi_memmap(); /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; -- cgit v1.2.1 From a4c81cf684350797939416c99effb9d3ae46bca6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 18 May 2008 01:18:57 -0700 Subject: x86: extend e820 ealy_res support 32bit move early_res related from e820_64.c to e820.c make edba detection to be done in head32.c remove smp_alloc_memory, because we have fixed trampoline address now. Signed-off-by: Yinghai Lu arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 10 files changed, 320 insertions(+), 319 deletions(-) Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 --------------------------------- arch/x86/kernel/head32.c | 76 +++++++++++++ arch/x86/kernel/setup_32.c | 109 ++++-------------- arch/x86/kernel/smpboot.c | 17 --- arch/x86/kernel/trampoline.c | 2 +- arch/x86/mach-voyager/voyager_smp.c | 9 -- 7 files changed, 314 insertions(+), 309 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 41c480ae47df..35da8cdbe5e6 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -22,7 +22,9 @@ #include #include #include +#include #include +#include struct e820map e820; @@ -493,3 +495,215 @@ __init void e820_setup_gap(void) pci_mem_start, gapstart, gapsize); } + +/* + * Early reserved memory areas. + */ +#define MAX_EARLY_RES 20 + +struct early_res { + u64 start, end; + char name[16]; +}; +static struct early_res early_res[MAX_EARLY_RES] __initdata = { + { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ +#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE) + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, +#endif +#if defined(CONFIG_X86_32) && defined(CONFIG_SMP) + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" }, + /* + * Has to be in very low memory so we can execute + * real-mode AP code. + */ + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" }, +#endif + {} +}; + +void __init reserve_early(u64 start, u64 end, char *name) +{ + int i; + struct early_res *r; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (end > r->start && start < r->end) + panic("Overlapping early reservations %llx-%llx %s to %llx-%llx %s\n", + start, end - 1, name?name:"", r->start, + r->end - 1, r->name); + } + if (i >= MAX_EARLY_RES) + panic("Too many early reservations"); + r = &early_res[i]; + r->start = start; + r->end = end; + if (name) + strncpy(r->name, name, sizeof(r->name) - 1); +} + +void __init free_early(u64 start, u64 end) +{ + struct early_res *r; + int i, j; + + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (start == r->start && end == r->end) + break; + } + if (i >= MAX_EARLY_RES || !early_res[i].end) + panic("free_early on not reserved area: %llx-%llx!", + start, end); + + for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) + ; + + memmove(&early_res[i], &early_res[i + 1], + (j - 1 - i) * sizeof(struct early_res)); + + early_res[j - 1].end = 0; +} + +void __init early_res_to_bootmem(u64 start, u64 end) +{ + int i; + u64 final_start, final_end; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + final_start = max(start, r->start); + final_end = min(end, r->end); + if (final_start >= final_end) + continue; + printk(KERN_INFO " early res: %d [%llx-%llx] %s\n", i, + final_start, final_end - 1, r->name); +#ifdef CONFIG_X86_64 + reserve_bootmem_generic(final_start, final_end - final_start); +#else + reserve_bootmem(final_start, final_end - final_start, + BOOTMEM_DEFAULT); +#endif + } +} + +/* Check for already reserved areas */ +static inline int __init bad_addr(u64 *addrp, u64 size, u64 align) +{ + int i; + u64 addr = *addrp, last; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last >= r->start && addr < r->end) { + *addrp = addr = round_up(r->end, align); + changed = 1; + goto again; + } + } + return changed; +} + +/* Check for already reserved areas */ +static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align) +{ + int i; + u64 addr = *addrp, last; + u64 size = *sizep; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last > r->start && addr < r->start) { + size = r->start - addr; + changed = 1; + goto again; + } + if (last > r->end && addr < r->end) { + addr = round_up(r->end, align); + size = last - addr; + changed = 1; + goto again; + } + if (last <= r->end && addr >= r->start) { + (*sizep)++; + return 0; + } + } + if (changed) { + *addrp = addr; + *sizep = size; + } + return changed; +} + +/* + * Find a free area with specified alignment in a specific range. + */ +u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + while (bad_addr(&addr, size, align) && addr+size <= ei_last) + ; + last = addr + size; + if (last > ei_last) + continue; + if (last > end) + continue; + return addr; + } + return -1ULL; +} + +/* + * Find next free range after *start + */ +u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + *sizep = ei_last - addr; + while (bad_addr_size(&addr, sizep, align) && + addr + *sizep <= ei_last) + ; + last = addr + *sizep; + if (last > ei_last) + continue; + return addr; + } + return -1UL; + +} diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 354fbb221709..07941b554519 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -46,202 +46,6 @@ unsigned long max_pfn_mapped; */ static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; -/* - * Early reserved memory areas. - */ -#define MAX_EARLY_RES 20 - -struct early_res { - unsigned long start, end; - char name[16]; -}; -static struct early_res early_res[MAX_EARLY_RES] __initdata = { - { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ -#ifdef CONFIG_X86_TRAMPOLINE - { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, -#endif - {} -}; - -void __init reserve_early(unsigned long start, unsigned long end, char *name) -{ - int i; - struct early_res *r; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (end > r->start && start < r->end) - panic("Overlapping early reservations %lx-%lx %s to %lx-%lx %s\n", - start, end - 1, name?name:"", r->start, r->end - 1, r->name); - } - if (i >= MAX_EARLY_RES) - panic("Too many early reservations"); - r = &early_res[i]; - r->start = start; - r->end = end; - if (name) - strncpy(r->name, name, sizeof(r->name) - 1); -} - -void __init free_early(unsigned long start, unsigned long end) -{ - struct early_res *r; - int i, j; - - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (start == r->start && end == r->end) - break; - } - if (i >= MAX_EARLY_RES || !early_res[i].end) - panic("free_early on not reserved area: %lx-%lx!", start, end); - - for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) - ; - - memmove(&early_res[i], &early_res[i + 1], - (j - 1 - i) * sizeof(struct early_res)); - - early_res[j - 1].end = 0; -} - -void __init early_res_to_bootmem(unsigned long start, unsigned long end) -{ - int i; - unsigned long final_start, final_end; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - final_start = max(start, r->start); - final_end = min(end, r->end); - if (final_start >= final_end) - continue; - printk(KERN_INFO " early res: %d [%lx-%lx] %s\n", i, - final_start, final_end - 1, r->name); - reserve_bootmem_generic(final_start, final_end - final_start); - } -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr(unsigned long *addrp, unsigned long size, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last >= r->start && addr < r->end) { - *addrp = addr = round_up(r->end, align); - changed = 1; - goto again; - } - } - return changed; -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - unsigned long size = *sizep; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last > r->start && addr < r->start) { - size = r->start - addr; - changed = 1; - goto again; - } - if (last > r->end && addr < r->end) { - addr = round_up(r->end, align); - size = last - addr; - changed = 1; - goto again; - } - if (last <= r->end && addr >= r->start) { - (*sizep)++; - return 0; - } - } - if (changed) { - *addrp = addr; - *sizep = size; - } - return changed; -} - -/* - * Find a free area with specified alignment in a specific range. - */ -unsigned long __init find_e820_area(unsigned long start, unsigned long end, - unsigned long size, unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - while (bad_addr(&addr, size, align) && addr+size <= ei_last) - ; - last = addr + size; - if (last > ei_last) - continue; - if (last > end) - continue; - return addr; - } - return -1UL; -} - -/* - * Find next free range after *start - */ -unsigned long __init find_e820_area_size(unsigned long start, - unsigned long *sizep, - unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - *sizep = ei_last - addr; - while (bad_addr_size(&addr, sizep, align) && - addr + *sizep <= ei_last) - ; - last = addr + *sizep; - if (last > ei_last) - continue; - return addr; - } - return -1UL; - -} /* * Find the highest page frame number we have available */ diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 3db059058927..c216d3c2a991 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -8,7 +8,83 @@ #include #include +#include +#include +#include +#include + +#define BIOS_LOWMEM_KILOBYTES 0x413 + +/* + * The BIOS places the EBDA/XBDA at the top of conventional + * memory, and usually decreases the reported amount of + * conventional memory (int 0x12) too. This also contains a + * workaround for Dell systems that neglect to reserve EBDA. + * The same workaround also avoids a problem with the AMD768MPX + * chipset: reserve a page before VGA to prevent PCI prefetch + * into it (errata #56). Usually the page is reserved anyways, + * unless you have no PS/2 mouse plugged in. + */ +static void __init reserve_ebda_region(void) +{ + unsigned int lowmem, ebda_addr; + + /* To determine the position of the EBDA and the */ + /* end of conventional memory, we need to look at */ + /* the BIOS data area. In a paravirtual environment */ + /* that area is absent. We'll just have to assume */ + /* that the paravirt case can handle memory setup */ + /* correctly, without our help. */ + if (paravirt_enabled()) + return; + + /* end of low (conventional) memory */ + lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); + lowmem <<= 10; + + /* start of EBDA area */ + ebda_addr = get_bios_ebda(); + + /* Fixup: bios puts an EBDA in the top 64K segment */ + /* of conventional memory, but does not adjust lowmem. */ + if ((lowmem - ebda_addr) <= 0x10000) + lowmem = ebda_addr; + + /* Fixup: bios does not report an EBDA at all. */ + /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ + if ((ebda_addr == 0) && (lowmem >= 0x9f000)) + lowmem = 0x9f000; + + /* Paranoia: should never happen, but... */ + if ((lowmem == 0) || (lowmem >= 0x100000)) + lowmem = 0x9f000; + + /* reserve all memory between lowmem and the 1MB mark */ + reserve_early(lowmem, 0x100000, "BIOS reserved"); +} + void __init i386_start_kernel(void) { + reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS"); + +#ifdef CONFIG_BLK_DEV_INITRD + /* Reserve INITRD */ + if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); + } +#endif + reserve_early(__pa_symbol(&_end), init_pg_tables_end, "INIT_PG_TABLE"); + + reserve_ebda_region(); + + /* + * At this point everything still needed from the boot loader + * or BIOS or kernel text should be early reserved or marked not + * RAM in e820. All other memory is free game. + */ + start_kernel(); } diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 5faeab69edd9..fed482c62450 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -359,56 +359,6 @@ unsigned long __init find_max_low_pfn(void) return max_low_pfn; } -#define BIOS_LOWMEM_KILOBYTES 0x413 - -/* - * The BIOS places the EBDA/XBDA at the top of conventional - * memory, and usually decreases the reported amount of - * conventional memory (int 0x12) too. This also contains a - * workaround for Dell systems that neglect to reserve EBDA. - * The same workaround also avoids a problem with the AMD768MPX - * chipset: reserve a page before VGA to prevent PCI prefetch - * into it (errata #56). Usually the page is reserved anyways, - * unless you have no PS/2 mouse plugged in. - */ -static void __init reserve_ebda_region(void) -{ - unsigned int lowmem, ebda_addr; - - /* To determine the position of the EBDA and the */ - /* end of conventional memory, we need to look at */ - /* the BIOS data area. In a paravirtual environment */ - /* that area is absent. We'll just have to assume */ - /* that the paravirt case can handle memory setup */ - /* correctly, without our help. */ - if (paravirt_enabled()) - return; - - /* end of low (conventional) memory */ - lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); - lowmem <<= 10; - - /* start of EBDA area */ - ebda_addr = get_bios_ebda(); - - /* Fixup: bios puts an EBDA in the top 64K segment */ - /* of conventional memory, but does not adjust lowmem. */ - if ((lowmem - ebda_addr) <= 0x10000) - lowmem = ebda_addr; - - /* Fixup: bios does not report an EBDA at all. */ - /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ - if ((ebda_addr == 0) && (lowmem >= 0x9f000)) - lowmem = 0x9f000; - - /* Paranoia: should never happen, but... */ - if ((lowmem == 0) || (lowmem >= 0x100000)) - lowmem = 0x9f000; - - /* reserve all memory between lowmem and the 1MB mark */ - reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT); -} - #ifndef CONFIG_NEED_MULTIPLE_NODES static void __init setup_bootmem_allocator(void); static unsigned long __init setup_memory(void) @@ -522,25 +472,32 @@ static void __init reserve_initrd(void) unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; unsigned long ramdisk_here; - initrd_start = 0; - if (!boot_params.hdr.type_of_loader || !ramdisk_image || !ramdisk_size) return; /* No initrd provided by bootloader */ + initrd_start = 0; + if (ramdisk_end < ramdisk_image) { + free_bootmem(ramdisk_image, ramdisk_size); printk(KERN_ERR "initrd wraps around end of memory, " "disabling initrd\n"); return; } if (ramdisk_size >= end_of_lowmem/2) { + free_bootmem(ramdisk_image, ramdisk_size); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; } + if (ramdisk_end <= end_of_lowmem) { /* All in lowmem, easy case */ - reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT); + /* + * don't need to reserve again, already reserved early + * in i386_start_kernel, and early_res_to_bootmem + * convert that to reserved in bootmem + */ initrd_start = ramdisk_image + PAGE_OFFSET; initrd_end = initrd_start+ramdisk_size; return; @@ -582,6 +539,8 @@ static void __init relocate_initrd(void) p = (char *)__va(ramdisk_image); memcpy(q, p, clen); q += clen; + /* need to free these low pages...*/ + free_bootmem(ramdisk_image, clen); ramdisk_image += clen; ramdisk_size -= clen; } @@ -600,47 +559,28 @@ static void __init relocate_initrd(void) ramdisk_image += clen; ramdisk_size -= clen; } + /* high pages is not converted by early_res_to_bootmem */ } #endif /* CONFIG_BLK_DEV_INITRD */ void __init setup_bootmem_allocator(void) { - unsigned long bootmap_size; + unsigned long bootmap_size, bootmap; /* * Initialize the boot-time allocator (with low memory only): */ - bootmap_size = init_bootmem(min_low_pfn, max_low_pfn); - + bootmap_size = bootmem_bootmap_pages(max_low_pfn)<> PAGE_SHIFT, max_low_pfn); register_bootmem_low_pages(max_low_pfn); + early_res_to_bootmem(0, max_low_pfn<llc_shared_map; } -#ifdef CONFIG_X86_32 -/* - * We are called very early to get the low memory for the - * SMP bootup trampoline page. - */ -void __init smp_alloc_memory(void) -{ - trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE); - /* - * Has to be in very low memory so we can execute - * real-mode AP code. - */ - if (__pa(trampoline_base) >= 0x9F000) - BUG(); -} -#endif - static void impress_friends(void) { int cpu; diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index abbf199adebb..1106fac6024d 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -2,7 +2,7 @@ #include -/* ready for x86_64, no harm for x86, since it will overwrite after alloc */ +/* ready for x86_64 and x86 */ unsigned char *trampoline_base = __va(TRAMPOLINE_BASE); /* diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 8acbf0cdf1a5..7bbebbfe8c4e 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -1137,15 +1137,6 @@ void flush_tlb_all(void) on_each_cpu(do_flush_tlb_all, 0, 1, 1); } -/* used to set up the trampoline for other CPUs when the memory manager - * is sorted out */ -void __init smp_alloc_memory(void) -{ - trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE); - if (__pa(trampoline_base) >= 0x93000) - BUG(); -} - /* send a reschedule CPI to one CPU by physical CPU number*/ static void voyager_smp_send_reschedule(int cpu) { -- cgit v1.2.1 From ba5b14cc0311af6ed20dc25aa98a1d5ea6f2e6c0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 21 May 2008 18:40:18 -0700 Subject: x86: extend e820 ealy_res support 32bit - fix use find_e820_area to find addess for new RAMDISK, instead of using ram blindly also print out low ram and bootmap info Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup_32.c | 55 ++++++++++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index fed482c62450..3c451d143eba 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -466,11 +466,11 @@ static bool do_relocate_initrd = false; static void __init reserve_initrd(void) { - unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; - unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; - unsigned long ramdisk_end = ramdisk_image + ramdisk_size; - unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; - unsigned long ramdisk_here; + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT; + u64 ramdisk_here; if (!boot_params.hdr.type_of_loader || !ramdisk_image || !ramdisk_size) @@ -478,14 +478,8 @@ static void __init reserve_initrd(void) initrd_start = 0; - if (ramdisk_end < ramdisk_image) { - free_bootmem(ramdisk_image, ramdisk_size); - printk(KERN_ERR "initrd wraps around end of memory, " - "disabling initrd\n"); - return; - } if (ramdisk_size >= end_of_lowmem/2) { - free_bootmem(ramdisk_image, ramdisk_size); + free_early(ramdisk_image, ramdisk_image + ramdisk_size - 1); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -495,8 +489,7 @@ static void __init reserve_initrd(void) /* All in lowmem, easy case */ /* * don't need to reserve again, already reserved early - * in i386_start_kernel, and early_res_to_bootmem - * convert that to reserved in bootmem + * in i386_start_kernel */ initrd_start = ramdisk_image + PAGE_OFFSET; initrd_end = initrd_start+ramdisk_size; @@ -504,11 +497,14 @@ static void __init reserve_initrd(void) } /* We need to move the initrd down into lowmem */ - ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK; + ramdisk_here = find_e820_area(min_low_pfn<> PAGE_SHIFT, max_low_pfn); + printk(KERN_INFO " low ram: %08lx - %08lx\n", + min_low_pfn< Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: move mp_ioapic_routing to mpparse and make it static mpparse is the only user of mp_ioapic_routing. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 2 -- arch/x86/kernel/mpparse.c | 4 ++-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc6c41e..6f20fa92bbaf 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -331,8 +331,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e #ifdef CONFIG_X86_IO_APIC -struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - static int __init acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) { diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 404683b94e79..bb7213335991 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -1,5 +1,5 @@ /* - * Intel Multiprocessor Specification 1.1 and 1.4 +2 * Intel Multiprocessor Specification 1.1 and 1.4 * compliant MP-table parsing routines. * * (c) 1995 Alan Cox, Building #3 @@ -805,7 +805,7 @@ int es7000_plat; #define MP_ISA_BUS 0 -extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; +static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; static int mp_find_ioapic(int gsi) { -- cgit v1.2.1 From a91eea6df383f26fc4fcbefcbdb5aee8facd17fd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: fix shadow variables of global end_pnf in e820_64.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 07941b554519..5a9bc9244dc6 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -51,21 +51,21 @@ static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; */ unsigned long __init e820_end_of_ram(void) { - unsigned long end_pfn; + unsigned long last_pfn; - end_pfn = find_max_pfn_with_active_regions(); + last_pfn = find_max_pfn_with_active_regions(); - if (end_pfn > max_pfn_mapped) - max_pfn_mapped = end_pfn; + if (last_pfn > max_pfn_mapped) + max_pfn_mapped = last_pfn; if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT) max_pfn_mapped = MAXMEM>>PAGE_SHIFT; - if (end_pfn > end_user_pfn) - end_pfn = end_user_pfn; - if (end_pfn > max_pfn_mapped) - end_pfn = max_pfn_mapped; + if (last_pfn > end_user_pfn) + last_pfn = end_user_pfn; + if (last_pfn > max_pfn_mapped) + last_pfn = max_pfn_mapped; printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped); - return end_pfn; + return last_pfn; } /* @@ -124,12 +124,12 @@ void __init e820_mark_nosave_regions(void) } /* - * Finds an active region in the address range from start_pfn to end_pfn and + * Finds an active region in the address range from start_pfn to last_pfn and * returns its range in ei_startpfn and ei_endpfn for the e820 entry. */ static int __init e820_find_active_region(const struct e820entry *ei, unsigned long start_pfn, - unsigned long end_pfn, + unsigned long last_pfn, unsigned long *ei_startpfn, unsigned long *ei_endpfn) { @@ -146,14 +146,14 @@ static int __init e820_find_active_region(const struct e820entry *ei, /* Skip if map is outside the node */ if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || - *ei_startpfn >= end_pfn) + *ei_startpfn >= last_pfn) return 0; /* Check for overlaps */ if (*ei_startpfn < start_pfn) *ei_startpfn = start_pfn; - if (*ei_endpfn > end_pfn) - *ei_endpfn = end_pfn; + if (*ei_endpfn > last_pfn) + *ei_endpfn = last_pfn; /* Obey end_user_pfn to save on memmap */ if (*ei_startpfn >= end_user_pfn) @@ -167,7 +167,7 @@ static int __init e820_find_active_region(const struct e820entry *ei, /* Walk the e820 map and register active regions within a node */ void __init e820_register_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn) + unsigned long last_pfn) { unsigned long ei_startpfn; unsigned long ei_endpfn; @@ -175,7 +175,7 @@ e820_register_active_regions(int nid, unsigned long start_pfn, for (i = 0; i < e820.nr_map; i++) if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, + start_pfn, last_pfn, &ei_startpfn, &ei_endpfn)) add_active_range(nid, ei_startpfn, ei_endpfn); } @@ -188,13 +188,13 @@ e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long __init e820_hole_size(unsigned long start, unsigned long end) { unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long end_pfn = end >> PAGE_SHIFT; + unsigned long last_pfn = end >> PAGE_SHIFT; unsigned long ei_startpfn, ei_endpfn, ram = 0; int i; for (i = 0; i < e820.nr_map; i++) { if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, + start_pfn, last_pfn, &ei_startpfn, &ei_endpfn)) ram += ei_endpfn - ei_startpfn; } -- cgit v1.2.1 From 4a139a7fdec8964cecf7a3564ee7ae327141d495 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: include pci.h in e820_64.c global pci_mem_start needs a declaration. include pci.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 5a9bc9244dc6..3b2e0b1bb49b 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.1 From 11a62a056093a7f25f1595fbd8bd5f93559572b6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: cleanup print out for mptable the new output is: MPTABLE: OEM ID: SUN MPTABLE: Product ID: 4600 M2 MPTABLE: APIC at: 0x instead of it all in one line with <6> and double Product ID... Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mpparse.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index bb7213335991..5a18b2b9852e 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -113,7 +113,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) #ifdef CONFIG_X86_NUMAQ mpc_oem_bus_info(m, str, translation_table[mpc_record]); #else - Dprintk("Bus #%d is %s\n", m->mpc_busid, str); + printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str); #endif #if MAX_MP_BUSSES < 256 @@ -183,7 +183,7 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { mp_irqs[mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," + printk(KERN_INFO "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, @@ -196,7 +196,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m) static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) { - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC LINT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, @@ -309,16 +309,15 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) } memcpy(oem, mpc->mpc_oem, 8); oem[8] = 0; - printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem); + printk(KERN_INFO "MPTABLE: OEM ID: %s\n", oem); memcpy(str, mpc->mpc_productid, 12); str[12] = 0; - printk("Product ID: %s ", str); #ifdef CONFIG_X86_32 mps_oem_check(mpc, oem, str); #endif - printk(KERN_INFO "MPTABLE: Product ID: %s ", str); + printk(KERN_INFO "MPTABLE: Product ID: %s\n", str); printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); @@ -689,7 +688,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, unsigned int *bp = phys_to_virt(base); struct intel_mp_floating *mpf; - Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length); + printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length); BUILD_BUG_ON(sizeof(*mpf) != 16); while (length > 0) { -- cgit v1.2.1 From 32c5061265caf201d6a2c0d02181e2b68769c22c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:02:51 +0400 Subject: x86: move es7000_plat out of mpparse.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 11 ++++++----- arch/x86/mach-es7000/es7000plat.c | 2 ++ 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 5a18b2b9852e..ff1342325efc 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -793,15 +793,14 @@ void __init find_smp_config(void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -/* - * Keep this outside and initialized to 0, for !CONFIG_ACPI builds: - */ -int es7000_plat; - #ifdef CONFIG_ACPI #ifdef CONFIG_X86_IO_APIC +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +extern int es7000_plat; +#endif + #define MP_ISA_BUS 0 static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; @@ -928,11 +927,13 @@ void __init mp_config_acpi_legacy_irqs(void) set_bit(MP_ISA_BUS, mp_bus_not_pci); Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) /* * Older generations of ES7000 have no legacy identity mappings */ if (es7000_plat == 1) return; +#endif /* * Locate the IOAPIC that manages the ISA IRQs (0-15). diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c index f5d6f7d8b86e..a41c77a47227 100644 --- a/arch/x86/mach-es7000/es7000plat.c +++ b/arch/x86/mach-es7000/es7000plat.c @@ -52,6 +52,8 @@ static struct mip_reg *host_reg; static int mip_port; static unsigned long mip_addr, host_addr; +int es7000_plat; + /* * GSI override for ES7000 platforms. */ -- cgit v1.2.1 From 11113f84c72bd832dc4e76122e613b0e623e2346 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:02:57 +0400 Subject: x86: complete move ACPI from mpparse.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 304 ++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/mpparse.c | 299 +------------------------------------------ 2 files changed, 305 insertions(+), 298 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6f20fa92bbaf..b2ad09c4c6ae 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -846,6 +846,310 @@ static int __init acpi_parse_madt_lapic_entries(void) #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_IO_APIC +#define MP_ISA_BUS 0 + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +extern int es7000_plat; +#endif + +static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 __init uniq_ioapic_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); +#ifdef CONFIG_X86_32 + mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); +#else + mp_ioapics[idx].mpc_apicver = 0; +#endif + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_irqflag = (trigger << 2) | polarity; + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ + mp_irqs[mp_irq_entries].mpc_dstapic = + mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + int i = 0; + int ioapic = -1; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; +#endif + set_bit(MP_ISA_BUS, mp_bus_not_pci); + Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; +#endif + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; +#ifdef CONFIG_X86_IO_APIC + mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; +#endif + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS + && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == + mp_irqs[mp_irq_entries].mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mpc_dstirq = i; + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic; + int ioapic_pin; +#ifdef CONFIG_X86_32 +#define MAX_GSI_NUM 4096 +#define IRQ_COMPRESSION_START 64 + + static int pci_irq = IRQ_COMPRESSION_START; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; +#else + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; +#endif + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + +#ifdef CONFIG_X86_32 + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); +#endif + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (ioapic_pin > MP_MAX_IOAPIC_PIN) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); +#ifdef CONFIG_X86_32 + return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); +#else + return gsi; +#endif + } + + set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); +#ifdef CONFIG_X86_32 + /* + * For GSI >= 64, use IRQ compression + */ + if ((gsi >= IRQ_COMPRESSION_START) + && (triggering == ACPI_LEVEL_SENSITIVE)) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } +#endif + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index ff1342325efc..d05b70c329c4 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -1,5 +1,5 @@ /* -2 * Intel Multiprocessor Specification 1.1 and 1.4 + * Intel Multiprocessor Specification 1.1 and 1.4 * compliant MP-table parsing routines. * * (c) 1995 Alan Cox, Building #3 @@ -788,300 +788,3 @@ void __init find_smp_config(void) { __find_smp_config(1); } - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#ifdef CONFIG_X86_IO_APIC - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) -extern int es7000_plat; -#endif - -#define MP_ISA_BUS 0 - -static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].mpc_apicver = 0; -#endif - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - MP_intsrc_info(&intsrc); -} - -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; -#endif - set_bit(MP_ISA_BUS, mp_bus_not_pci); - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; -#endif - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; -#endif - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - MP_intsrc_info(&intsrc); - } -} - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 - - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; -#endif - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - -#ifdef CONFIG_X86_32 - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); -#endif - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - if (ioapic_pin > MP_MAX_IOAPIC_PIN) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} - -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ -- cgit v1.2.1 From 5f8951487ddbacbc949e9ffae574f94791f9b4dd Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:04 +0400 Subject: x86: make mp_ioapic_routing definition local Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b2ad09c4c6ae..f75c2030f4b5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -852,7 +852,12 @@ static int __init acpi_parse_madt_lapic_entries(void) extern int es7000_plat; #endif -static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; +static struct { + int apic_id; + int gsi_base; + int gsi_end; + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; static int mp_find_ioapic(int gsi) { -- cgit v1.2.1 From ec2cd0a22e2715f776a934e01c4f8ea098324fe1 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:10 +0400 Subject: x86: make struct config_ioapic not MPspec specific Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 28 ++++++++++++------------ arch/x86/kernel/apic_32.c | 2 +- arch/x86/kernel/io_apic_32.c | 52 ++++++++++++++++++++++---------------------- arch/x86/kernel/io_apic_64.c | 26 +++++++++++----------- arch/x86/kernel/mpparse.c | 8 +++++-- 5 files changed, 60 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index f75c2030f4b5..a26dd91faf0f 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -887,8 +887,8 @@ static u8 __init uniq_ioapic_id(u8 id) DECLARE_BITMAP(used, 256); bitmap_zero(used, 256); for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); + struct mp_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mp_apicid, used); } if (!test_bit(id, used)) return id; @@ -920,29 +920,29 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) idx = nr_ioapics; - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; + mp_ioapics[idx].mp_type = MP_IOAPIC; + mp_ioapics[idx].mp_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mp_apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); + mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id); #ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); + mp_ioapics[idx].mp_apicver = io_apic_get_version(idx); #else - mp_ioapics[idx].mpc_apicver = 0; + mp_ioapics[idx].mp_apicver = 0; #endif /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid; mp_ioapic_routing[idx].gsi_base = gsi_base; mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid, + mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr, mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); nr_ioapics++; @@ -975,7 +975,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ mp_irqs[mp_irq_entries].mpc_dstapic = - mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + mp_ioapics[ioapic].mp_apicid; /* APIC ID */ mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ if (++mp_irq_entries == MAX_IRQ_SOURCES) @@ -1016,7 +1016,7 @@ void __init mp_config_acpi_legacy_irqs(void) mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; #ifdef CONFIG_X86_IO_APIC - mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; + mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mp_apicid; #endif /* * Use the default configuration for the IRQs 0-15. Unless diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..fa1be1d62916 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1202,7 +1202,7 @@ void __init init_apic_mappings(void) for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; + ioapic_phys = mp_ioapics[i].mp_apicaddr; if (!ioapic_phys) { printk(KERN_ERR "WARNING: bogus zero IO-APIC " diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..5af1b717236c 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -72,7 +72,7 @@ int sis_apic_bug = -1; int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ @@ -110,7 +110,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -802,7 +802,7 @@ static int find_irq_entry(int apic, int pin, int type) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && mp_irqs[i].mpc_dstirq == pin) return i; @@ -844,7 +844,7 @@ static int __init find_isa_irq_apic(int irq, int type) if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) return apic; } } @@ -872,7 +872,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) int lbus = mp_irqs[i].mpc_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; @@ -1250,12 +1250,12 @@ static void __init setup_IO_APIC_irqs(void) if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", - mp_ioapics[apic].mpc_apicid, + mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else apic_printk(APIC_VERBOSE, ", %d-%d", - mp_ioapics[apic].mpc_apicid, pin); + mp_ioapics[apic].mp_apicid, pin); continue; } @@ -1357,7 +1357,7 @@ void __init print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -1376,7 +1376,7 @@ void __init print_IO_APIC(void) reg_03.raw = io_apic_read(apic, 3); spin_unlock_irqrestore(&ioapic_lock, flags); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); @@ -1749,14 +1749,14 @@ static void __init setup_ioapic_ids_from_mpc(void) reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - old_id = mp_ioapics[apic].mpc_apicid; + old_id = mp_ioapics[apic].mp_apicid; - if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { + if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); - mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; + mp_ioapics[apic].mp_apicid = reg_00.bits.ID; } /* @@ -1765,9 +1765,9 @@ static void __init setup_ioapic_ids_from_mpc(void) * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(phys_id_present_map, - mp_ioapics[apic].mpc_apicid)) { + mp_ioapics[apic].mp_apicid)) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; @@ -1776,13 +1776,13 @@ static void __init setup_ioapic_ids_from_mpc(void) printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); - mp_ioapics[apic].mpc_apicid = i; + mp_ioapics[apic].mp_apicid = i; } else { physid_mask_t tmp; - tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); + tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); physids_or(phys_id_present_map, phys_id_present_map, tmp); } @@ -1791,11 +1791,11 @@ static void __init setup_ioapic_ids_from_mpc(void) * We need to adjust the IRQ routing table * if the ID changed. */ - if (old_id != mp_ioapics[apic].mpc_apicid) + if (old_id != mp_ioapics[apic].mp_apicid) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_dstapic == old_id) mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; + = mp_ioapics[apic].mp_apicid; /* * Read the right value from the MPC table and @@ -1803,9 +1803,9 @@ static void __init setup_ioapic_ids_from_mpc(void) */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; + reg_00.bits.ID = mp_ioapics[apic].mp_apicid; spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0, reg_00.raw); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -1816,7 +1816,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) + if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid) printk("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); @@ -2355,8 +2355,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2789,7 +2789,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, - mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, + mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq, edge_level, active_high_low); ioapic_register_intr(irq, entry.vector, edge_level); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..4555ad8c2070 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -104,7 +104,7 @@ DEFINE_SPINLOCK(vector_lock); int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ @@ -140,7 +140,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -454,7 +454,7 @@ static int find_irq_entry(int apic, int pin, int type) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && mp_irqs[i].mpc_dstirq == pin) return i; @@ -496,7 +496,7 @@ static int __init find_isa_irq_apic(int irq, int type) if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) return apic; } } @@ -524,7 +524,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) int lbus = mp_irqs[i].mpc_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; @@ -846,7 +846,7 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " "IRQ %d Mode:%i Active:%i)\n", - apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector, + apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, irq, trigger, polarity); /* @@ -887,10 +887,10 @@ static void __init setup_IO_APIC_irqs(void) idx = find_irq_entry(apic,pin,mp_INT); if (idx == -1) { if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else - apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin); continue; } if (!first_notcon) { @@ -965,7 +965,7 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -983,7 +983,7 @@ void __apicdebuginit print_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); @@ -1841,8 +1841,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2336,7 +2336,7 @@ void __init ioapic_init_mappings(void) ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; + ioapic_phys = mp_ioapics[i].mp_apicaddr; } else { ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d05b70c329c4..9f1e5bf7f0fb 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -176,7 +176,11 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) if (bad_ioapic(m->mpc_apicaddr)) return; - mp_ioapics[nr_ioapics] = *m; + mp_ioapics[nr_ioapics].mp_apicaddr = m->mpc_apicaddr; + mp_ioapics[nr_ioapics].mp_apicid = m->mpc_apicid; + mp_ioapics[nr_ioapics].mp_type = m->mpc_type; + mp_ioapics[nr_ioapics].mp_apicver = m->mpc_apicver; + mp_ioapics[nr_ioapics].mp_flags = m->mpc_flags; nr_ioapics++; } @@ -426,7 +430,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) intsrc.mpc_type = MP_INTSRC; intsrc.mpc_irqflag = 0; /* conforming */ intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + intsrc.mpc_dstapic = mp_ioapics[0].mp_apicid; intsrc.mpc_irqtype = mp_INT; -- cgit v1.2.1 From 2fddb6e28e903a3ab1704cc5aac01be5a59dc05b Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:17 +0400 Subject: x86: make config_irqsrc not MPspec specific Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 43 +++++++++++++++-------------- arch/x86/kernel/io_apic_32.c | 64 ++++++++++++++++++++++---------------------- arch/x86/kernel/io_apic_64.c | 58 +++++++++++++++++++-------------------- arch/x86/kernel/mpparse.c | 8 +++++- 4 files changed, 89 insertions(+), 84 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index a26dd91faf0f..276ec058f683 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -969,14 +969,14 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) if ((bus_irq == 0) && (trigger == 3)) trigger = 1; - mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mpc_irqflag = (trigger << 2) | polarity; - mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ - mp_irqs[mp_irq_entries].mpc_dstapic = + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mp_irqflag = (trigger << 2) | polarity; + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_srcbusirq = bus_irq; /* IRQ */ + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */ - mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ + mp_irqs[mp_irq_entries].mp_dstirq = pin; /* INTIN# */ if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); @@ -1012,12 +1012,11 @@ void __init mp_config_acpi_legacy_irqs(void) if (ioapic < 0) return; - mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mp_apicid; -#endif + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; + /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. @@ -1026,17 +1025,17 @@ void __init mp_config_acpi_legacy_irqs(void) int idx; for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; + struct mp_config_intsrc *irq = mp_irqs + idx; /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) + if (irq->mp_srcbus == MP_ISA_BUS + && irq->mp_srcbusirq == i) break; /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == - mp_irqs[mp_irq_entries].mpc_dstapic) && - (irq->mpc_dstirq == i)) + if ((irq->mp_dstapic == + mp_irqs[mp_irq_entries].mp_dstapic) && + (irq->mp_dstirq == i)) break; } @@ -1045,9 +1044,9 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mpc_srcbusirq = i; /* Identity mapped */ - mp_irqs[mp_irq_entries].mpc_dstirq = i; + mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mp_dstirq = i; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 5af1b717236c..ea68c3e5ba1d 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -76,7 +76,7 @@ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; @@ -801,10 +801,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -818,13 +818,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -834,17 +834,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -869,23 +869,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -952,7 +952,7 @@ static int EISA_ELCR(unsigned int irq) * EISA conforming in the MP table, that means its trigger type must * be read in from the ELCR */ -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq)) #define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always polarity one level triggered, @@ -969,13 +969,13 @@ static int EISA_ELCR(unsigned int irq) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ { @@ -1012,13 +1012,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ { @@ -1097,16 +1097,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; else { /* * PCI IRQs are mapped in order @@ -1793,8 +1793,8 @@ static void __init setup_ioapic_ids_from_mpc(void) */ if (old_id != mp_ioapics[apic].mp_apicid) for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic + if (mp_irqs[i].mp_dstapic == old_id) + mp_irqs[i].mp_dstapic = mp_ioapics[apic].mp_apicid; /* @@ -2810,8 +2810,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 4555ad8c2070..e7f1476ed537 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -108,7 +108,7 @@ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; @@ -453,10 +453,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -470,13 +470,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -486,17 +486,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -521,23 +521,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -565,13 +565,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ if (test_bit(bus, mp_bus_not_pci)) @@ -607,13 +607,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ if (test_bit(bus, mp_bus_not_pci)) @@ -660,16 +660,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; } else { /* * PCI IRQs are mapped in order @@ -2242,8 +2242,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9f1e5bf7f0fb..59f051db236d 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -186,12 +186,18 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { - mp_irqs[mp_irq_entries] = *m; printk(KERN_INFO "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + mp_irqs[mp_irq_entries].mp_dstapic = m->mpc_dstapic; + mp_irqs[mp_irq_entries].mp_type = m->mpc_type; + mp_irqs[mp_irq_entries].mp_irqtype = m->mpc_irqtype; + mp_irqs[mp_irq_entries].mp_irqflag = m->mpc_irqflag; + mp_irqs[mp_irq_entries].mp_srcbus = m->mpc_srcbus; + mp_irqs[mp_irq_entries].mp_srcbusirq = m->mpc_srcbusirq; + mp_irqs[mp_irq_entries].mp_dstirq = m->mpc_dstirq; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } -- cgit v1.2.1 From 59f4519ad7ade61123e90085b0dadb2ea197bd87 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Sun, 18 May 2008 05:24:41 +0200 Subject: x86: initialize all fields of mp_irqs[mp_irq_entries] Commit "x86: make config_irqsrc not MPspec specific" introduced some uses of uninitialized fields in mp_config_acpi_legacy_irqs(). I need the following patch to get sched-devel/master to boot. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/acpi/boot.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 276ec058f683..6170c6aeaf79 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1012,11 +1012,6 @@ void __init mp_config_acpi_legacy_irqs(void) if (ioapic < 0) return; - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; - /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. @@ -1044,6 +1039,10 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ mp_irqs[mp_irq_entries].mp_dstirq = i; -- cgit v1.2.1 From aafbdf71f1d3aeffd679b1a86e1b28f71515856c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 22 May 2008 12:26:15 +0400 Subject: x86: fix mpparse/acpi interaction Sitsofe Wheeler reported boot problems on linux-next. It looks like the same issue as found by Soeren Sandman in 7575217f656a93, "x86: initialize all fields of mp_irqs[mp_irq_entries]". But his fix is also not complete, as dstapic is used before it assigned. Reported-by: Sitsofe Wheeler Bisected-by: Sitsofe Wheeler Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/acpi/boot.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6170c6aeaf79..2ddfabae382b 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1019,6 +1019,11 @@ void __init mp_config_acpi_legacy_irqs(void) for (i = 0; i < 16; i++) { int idx; + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; + for (idx = 0; idx < mp_irq_entries; idx++) { struct mp_config_intsrc *irq = mp_irqs + idx; @@ -1039,10 +1044,6 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ mp_irqs[mp_irq_entries].mp_dstirq = i; -- cgit v1.2.1 From bf62f3981c7076714e3b9f5fa6989a806cad02bf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 20 May 2008 20:10:58 -0700 Subject: x86: move e820_mark_nosave_regions to e820.c and make e820_mark_nosave_regions to take limit_pfn to use max_low_pfn for 32bit and end_pfn for 64bit Signed-off-by: Yinghai Lu Cc: Andrew Morton Signed-off-by: Thomas Gleixner --- arch/x86/kernel/e820.c | 32 ++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 32 -------------------------------- arch/x86/kernel/e820_64.c | 32 -------------------------------- arch/x86/kernel/setup_32.c | 2 +- arch/x86/kernel/setup_64.c | 2 +- 5 files changed, 34 insertions(+), 66 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 35da8cdbe5e6..0cd9132c9450 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -495,6 +496,37 @@ __init void e820_setup_gap(void) pci_mem_start, gapstart, gapsize); } +#if defined(CONFIG_X86_64) || \ + (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) +/** + * Find the ranges of physical addresses that do not correspond to + * e820 RAM areas and mark the corresponding pages as nosave for + * hibernation (32 bit) or software suspend and suspend to RAM (64 bit). + * + * This function requires the e820 map to be sorted and without any + * overlapping entries and assumes the first e820 area to be RAM. + */ +void __init e820_mark_nosave_regions(unsigned long limit_pfn) +{ + int i; + unsigned long pfn; + + pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); + for (i = 1; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (pfn < PFN_UP(ei->addr)) + register_nosave_region(pfn, PFN_UP(ei->addr)); + + pfn = PFN_DOWN(ei->addr + ei->size); + if (ei->type != E820_RAM) + register_nosave_region(PFN_UP(ei->addr), pfn); + + if (pfn >= limit_pfn) + break; + } +} +#endif /* * Early reserved memory areas. diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index dfe25751038b..db760d4706af 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include @@ -208,37 +207,6 @@ void __init init_iomem_resources(struct resource *code_resource, } } -#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) -/** - * e820_mark_nosave_regions - Find the ranges of physical addresses that do not - * correspond to e820 RAM areas and mark the corresponding pages as nosave for - * hibernation. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long pfn; - - pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (pfn < PFN_UP(ei->addr)) - register_nosave_region(pfn, PFN_UP(ei->addr)); - - pfn = PFN_DOWN(ei->addr + ei->size); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), pfn); - - if (pfn >= max_low_pfn) - break; - } -} -#endif - /* * Find the highest page frame number we have available */ diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 3b2e0b1bb49b..5e063e72b24a 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include @@ -93,37 +92,6 @@ void __init e820_reserve_resources(void) } } -/* - * Find the ranges of physical addresses that do not correspond to - * e820 RAM areas and mark the corresponding pages as nosave for software - * suspend and suspend to RAM. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long paddr; - - paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (paddr < ei->addr) - register_nosave_region(PFN_DOWN(paddr), - PFN_UP(ei->addr)); - - paddr = round_down(ei->addr + ei->size, PAGE_SIZE); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), - PFN_DOWN(paddr)); - - if (paddr >= (end_pfn << PAGE_SHIFT)) - break; - } -} - /* * Finds an active region in the address range from start_pfn to last_pfn and * returns its range in ei_startpfn and ei_endpfn for the e820 entry. diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 3c451d143eba..e1173aecf69a 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -820,7 +820,7 @@ void __init setup_arch(char **cmdline_p) #endif e820_setup_gap(); - e820_mark_nosave_regions(); + e820_mark_nosave_regions(max_low_pfn); #ifdef CONFIG_VT #if defined(CONFIG_VGA_CONSOLE) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..975a5da46e49 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -516,7 +516,7 @@ void __init setup_arch(char **cmdline_p) * We trust e820 completely. No explicit ROM probing in memory. */ e820_reserve_resources(); - e820_mark_nosave_regions(); + e820_mark_nosave_regions(end_pfn); /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) -- cgit v1.2.1 From b3e2416465bc9140bfd209f247e6a789f68f0d19 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 23 May 2008 01:54:44 +0400 Subject: x86: Set pic_mode only if local apic code is present --- arch/x86/kernel/mpparse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 59f051db236d..e61523a13ecd 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -609,7 +609,7 @@ static void __init __get_smp_config(unsigned early) printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); -#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) if (mpf->mpf_feature2 & (1 << 7)) { printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); pic_mode = 1; -- cgit v1.2.1 From f3918352909f839a7b0dbf9b3f81d2e183c46f88 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 23 May 2008 01:54:51 +0400 Subject: x86: move pic_mode to apic_32.c --- arch/x86/kernel/apic_32.c | 2 ++ arch/x86/kernel/mpparse.c | 2 -- arch/x86/mach-visws/mpparse.c | 2 -- 3 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index fa1be1d62916..848c603457fe 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -76,6 +76,8 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); */ int apic_verbosity; +int pic_mode; + static unsigned int calibration_result; static int lapic_next_event(unsigned long delta, diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e61523a13ecd..b72c04602ad2 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -48,8 +48,6 @@ int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; static int mp_current_pci_id; -int pic_mode; - /* * Intel MP BIOS table parsing routines: */ diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c index 57484e91ab90..b7d063e7de1f 100644 --- a/arch/x86/mach-visws/mpparse.c +++ b/arch/x86/mach-visws/mpparse.c @@ -11,8 +11,6 @@ /* Have we found an MP table */ int smp_found_config; -int pic_mode; - extern unsigned int __cpuinitdata maxcpus; /* -- cgit v1.2.1 From bab4b27c00c4880737c18bb91138b1a7dd94164c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:03 +0400 Subject: x86: move smp_found_config --- arch/x86/kernel/apic_32.c | 3 +++ arch/x86/kernel/apic_64.c | 3 +++ arch/x86/kernel/mpparse.c | 8 ++++---- arch/x86/mach-visws/mpparse.c | 5 ++--- arch/x86/mach-voyager/voyager_smp.c | 5 ----- 5 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 848c603457fe..c304759f0834 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -78,6 +78,9 @@ int apic_verbosity; int pic_mode; +/* Have we found an MP table */ +int smp_found_config; + static unsigned int calibration_result; static int lapic_next_event(unsigned long delta, diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 5910020c3f24..54087f920f2f 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -56,6 +56,9 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); */ int apic_verbosity; +/* Have we found an MP table */ +int smp_found_config; + static struct resource lapic_resource = { .name = "Local APIC", .flags = IORESOURCE_MEM | IORESOURCE_BUSY, diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index b72c04602ad2..d67cd7600a21 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -32,9 +32,6 @@ #include #endif -/* Have we found an MP table */ -int smp_found_config; - /* * Various Linux-internal data structures created from the * MP-table. @@ -639,7 +636,9 @@ static void __init __get_smp_config(unsigned early) * override the defaults. */ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 0; +#endif printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. " @@ -706,8 +705,9 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, !mpf_checksum((unsigned char *)bp, 16) && ((mpf->mpf_specification == 1) || (mpf->mpf_specification == 4))) { - +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; +#endif mpf_found = mpf; #ifdef CONFIG_X86_32 printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c index b7d063e7de1f..a2fb78c0d154 100644 --- a/arch/x86/mach-visws/mpparse.c +++ b/arch/x86/mach-visws/mpparse.c @@ -8,9 +8,6 @@ #include "cobalt.h" #include "mach_apic.h" -/* Have we found an MP table */ -int smp_found_config; - extern unsigned int __cpuinitdata maxcpus; /* @@ -74,7 +71,9 @@ void __init find_smp_config(void) if (ncpus > maxcpus) ncpus = maxcpus; +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; +#endif while (ncpus--) MP_processor_info(mp++); diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 7bbebbfe8c4e..8dedd01e909f 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -59,11 +59,6 @@ __u32 voyager_quad_processors = 0; * activity count. Finally exported by i386_ksyms.c */ static int voyager_extended_cpus = 1; -/* Have we found an SMP box - used by time.c to do the profiling - interrupt for timeslicing; do not set to 1 until the per CPU timer - interrupt is active */ -int smp_found_config = 0; - /* Used for the invalidate map that's also checked in the spinlock */ static volatile unsigned long smp_invalidate_needed; -- cgit v1.2.1 From ce6444d39fdea29dcf145d2d95fe9cdc850aa53c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:09 +0400 Subject: x86: mp_bus_id_to_pci_bus is not needed --- arch/x86/kernel/io_apic_32.c | 2 +- arch/x86/kernel/io_apic_64.c | 2 +- arch/x86/kernel/mpparse.c | 10 ---------- 3 files changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index ea68c3e5ba1d..17b2e8f862d3 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -864,7 +864,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " "slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index e7f1476ed537..9637675ea555 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -516,7 +516,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d67cd7600a21..83dfd6696c2a 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -41,13 +41,6 @@ int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; - -static int mp_current_pci_id; - -/* - * Intel MP BIOS table parsing routines: - */ /* * Checksum an MP configuration block. @@ -101,7 +94,6 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) static void __init MP_bus_info(struct mpc_config_bus *m) { char str[7]; - memcpy(str, m->mpc_bustype, 6); str[6] = 0; @@ -130,8 +122,6 @@ static void __init MP_bus_info(struct mpc_config_bus *m) mpc_oem_pci_bus(m, translation_table[mpc_record]); #endif clear_bit(m->mpc_busid, mp_bus_not_pci); - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; #if defined(CONFIG_EISA) || defined (CONFIG_MCA) mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { -- cgit v1.2.1 From 8732fc4b237fca3bd3cb0ec87ca8fb90271b0baf Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:16 +0400 Subject: x86: move mp_bus_not_pci from mpparse.c --- arch/x86/kernel/io_apic_32.c | 6 ++++++ arch/x86/kernel/io_apic_64.c | 2 ++ arch/x86/kernel/mpparse.c | 10 ---------- 3 files changed, 8 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 17b2e8f862d3..2285b81ad1d5 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -81,6 +81,12 @@ struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + static int disable_timer_pin_1 __initdata; /* diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 9637675ea555..339cf6f926dc 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -113,6 +113,8 @@ struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 83dfd6696c2a..e8e041ed84d6 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -32,16 +32,6 @@ #include #endif -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) -int mp_bus_id_to_type[MAX_MP_BUSSES]; -#endif - -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); - /* * Checksum an MP configuration block. */ -- cgit v1.2.1 From 136ef671df04dc157afa0d4b96c7bd23ba072c9c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 20 May 2008 00:29:59 +0400 Subject: x86: allow MPPARSE to be deselected in SMP configs --- arch/x86/Kconfig.debug | 2 +- arch/x86/kernel/setup_32.c | 2 +- arch/x86/kernel/setup_64.c | 4 ++++ 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31ba4795..d5b364b43a02 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -127,7 +127,7 @@ config 4KSTACKS config X86_FIND_SMP_CONFIG def_bool y - depends on X86_LOCAL_APIC || X86_VOYAGER + depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS depends on X86_32 config X86_MPPARSE diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index e1173aecf69a..c04e8c91daf7 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -814,7 +814,7 @@ void __init setup_arch(char **cmdline_p) "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); #endif #endif -#ifdef CONFIG_X86_LOCAL_APIC +#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS) if (smp_found_config) get_smp_config(); #endif diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 975a5da46e49..89e6cca5d693 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -456,10 +456,12 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_reserve_bootmem(); +#ifdef CONFIG_X86_MPPARSE /* * Find and reserve possible boot-time SMP configuration: */ find_smp_config(); +#endif #ifdef CONFIG_BLK_DEV_INITRD if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; @@ -502,11 +504,13 @@ void __init setup_arch(char **cmdline_p) init_cpu_to_node(); +#ifdef CONFIG_X86_MPPARSE /* * get boot-time SMP configuration: */ if (smp_found_config) get_smp_config(); +#endif init_apic_mappings(); ioapic_init_mappings(); -- cgit v1.2.1 From b764a15f679942a7bc9d4f9645299e1defcc5b43 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 22 May 2008 21:22:04 +0100 Subject: x86: Switch apm to unlocked_kernel This pushes the lock a fair way down and the final kill looks like it should be an easy project for someone who wants to have a shot at it. Signed-off-by: Alan Cox Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apm_32.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index bf9290e29013..00e6d1370954 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,6 +228,7 @@ #include #include #include +#include #include #include @@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender) as->event_tail = 0; } as->events[as->event_head] = event; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) continue; switch (event) { case APM_SYS_SUSPEND: @@ -1396,7 +1397,7 @@ static void apm_mainloop(void) static int check_apm_user(struct apm_user *as, const char *func) { - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { + if (as == NULL || as->magic != APM_BIOS_MAGIC) { printk(KERN_ERR "apm: %s passed bad filp\n", func); return 1; } @@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait) return 0; } -static int do_ioctl(struct inode *inode, struct file *filp, - u_int cmd, u_long arg) +static long do_ioctl(struct file *filp, u_int cmd, u_long arg) { struct apm_user *as; + int ret; as = filp->private_data; if (check_apm_user(as, "ioctl")) return -EIO; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) return -EPERM; switch (cmd) { case APM_IOC_STANDBY: + lock_kernel(); if (as->standbys_read > 0) { as->standbys_read--; as->standbys_pending--; @@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp, queue_event(APM_USER_STANDBY, as); if (standbys_pending <= 0) standby(); + unlock_kernel(); break; case APM_IOC_SUSPEND: + lock_kernel(); if (as->suspends_read > 0) { as->suspends_read--; as->suspends_pending--; @@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp, } else queue_event(APM_USER_SUSPEND, as); if (suspends_pending <= 0) { - return suspend(1); + ret = suspend(1); } else { as->suspend_wait = 1; wait_event_interruptible(apm_suspend_waitqueue, as->suspend_wait == 0); - return as->suspend_result; + ret = as->suspend_result; } - break; + unlock_kernel(); + return ret; default: - return -EINVAL; + return -ENOTTY; } return 0; } @@ -1860,7 +1865,7 @@ static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = do_read, .poll = do_poll, - .ioctl = do_ioctl, + .unlocked_ioctl = do_ioctl, .open = do_open, .release = do_release, }; -- cgit v1.2.1 From 85cc35fa7255d113b5383a9c8536c363274bb475 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 25 May 2008 21:21:36 +0200 Subject: x86: fix mpparse fallout UP builds with LOCAL_APIC=y and IO_APIC=n fail with a missing reference to mp_bus_not_pci. Distangle the mpparse code some more and move the ioapic specific bus check into a separate function. This code needs sume urgent un#ifdef surgery all over the place. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mpparse.c | 73 ++++++++++++++++++++++++++--------------------- 1 file changed, 41 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e8e041ed84d6..9f3792d55044 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -81,6 +81,7 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) generic_processor_info(apicid, m->mpc_apicver); } +#ifdef CONFIG_X86_IO_APIC static void __init MP_bus_info(struct mpc_config_bus *m) { char str[7]; @@ -122,6 +123,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) } else printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); } +#endif #ifdef CONFIG_X86_IO_APIC @@ -336,7 +338,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) { struct mpc_config_bus *m = (struct mpc_config_bus *)mpt; +#ifdef CONFIG_X86_IO_APIC MP_bus_info(m); +#endif mpt += sizeof(*m); count += sizeof(*m); break; @@ -472,40 +476,11 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) MP_intsrc_info(&intsrc); } -#endif -static inline void __init construct_default_ISA_mptable(int mpc_default_type) +static void construct_ioapic_table(int mpc_default_type) { - struct mpc_config_processor processor; - struct mpc_config_bus bus; -#ifdef CONFIG_X86_IO_APIC struct mpc_config_ioapic ioapic; -#endif - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } + struct mpc_config_bus bus; bus.mpc_type = MP_BUS; bus.mpc_busid = 0; @@ -534,7 +509,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) MP_bus_info(&bus); } -#ifdef CONFIG_X86_IO_APIC ioapic.mpc_type = MP_IOAPIC; ioapic.mpc_apicid = 2; ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; @@ -546,7 +520,42 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) * We set up most of the low 16 IO-APIC pins according to MPS rules. */ construct_default_ioirq_mptable(mpc_default_type); +} +#else +static inline void construct_ioapic_table(int mpc_default_type) { } #endif + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + /* Either an integrated APIC or a discrete 82489DX. */ + processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + construct_ioapic_table(mpc_default_type); + lintsrc.mpc_type = MP_LINTSRC; lintsrc.mpc_irqflag = 0; /* conforming */ lintsrc.mpc_srcbusid = 0; -- cgit v1.2.1 From ddca03c98a7f7ad5ab09967ff52d4ed60358c896 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:31 +0400 Subject: x86: nmi - unify die_nmi() interface By slightly changing 32bit mode die_nmi() we may unify the interface and make it common for both (32/64bit) modes Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 7 +++---- arch/x86/kernel/traps_32.c | 8 +++++--- 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 69bdae555c18..bd04a28f7a5c 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -320,8 +320,6 @@ void touch_nmi_watchdog(void) } EXPORT_SYMBOL(touch_nmi_watchdog); -extern void die_nmi(struct pt_regs *, const char *msg); - notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { @@ -375,7 +373,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ - die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); + die_nmi("BUG: NMI Watchdog detected LOCKUP", + regs, 0); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); @@ -406,7 +405,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) char buf[64]; sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(regs, buf); + die_nmi(buf, regs, 0); return 0; } diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index bde6f63e15d5..f31e6651fa6f 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -755,9 +755,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs) static DEFINE_SPINLOCK(nmi_print_lock); -void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) +void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) { - if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP) return; spin_lock(&nmi_print_lock); @@ -766,10 +766,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) * to get a message out: */ bust_spinlocks(1); - printk(KERN_EMERG "%s", msg); + printk(KERN_EMERG "%s", str); printk(" on CPU%d, ip %08lx, registers:\n", smp_processor_id(), regs->ip); show_registers(regs); + if (do_panic) + panic("Non maskable interrupt"); console_silent(); spin_unlock(&nmi_print_lock); bust_spinlocks(0); -- cgit v1.2.1 From e56b3a12c45e439169f2d1f7194be397667320a6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:32 +0400 Subject: x86: nmi - die_nmi() output message unification Make 64bit die_nmi() to produce the same message as 32bit mode has Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 4 ++-- arch/x86/kernel/traps_64.c | 4 +++- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 33cb8ecbb6dd..1a98705270a2 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -358,8 +358,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) */ local_inc(&__get_cpu_var(alert_counter)); if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, - panic_on_timeout); + die_nmi("NMI Watchdog detected LOCKUP", + regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..6a048ce3c787 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -614,7 +614,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) * We are in trouble anyway, lets at least try * to get a message out. */ - printk(str, smp_processor_id()); + printk(KERN_EMERG "%s", str); + printk(" on CPU%d, ip %08lx, registers:\n", + smp_processor_id(), regs->ip); show_registers(regs); if (kexec_should_crash(current)) crash_kexec(regs); -- cgit v1.2.1 From c6425b9f143a75bbcd0a7684b4df40e20d0b2f32 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:33 +0400 Subject: x86: move do_nmi(), stop_nmi() and restart_nmi() to traps_64.c traps_32.c already holds these functions so do the same for traps_64.c Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 25 ------------------------- arch/x86/kernel/traps_64.c | 24 ++++++++++++++++++++++++ 2 files changed, 24 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 1a98705270a2..c1ea671525e5 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -30,7 +30,6 @@ int unknown_nmi_panic; int nmi_watchdog_enabled; -int panic_on_unrecovered_nmi; static cpumask_t backtrace_mask = CPU_MASK_NONE; @@ -383,30 +382,6 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) return rc; } -static unsigned ignore_nmis; - -asmlinkage notrace __kprobes void -do_nmi(struct pt_regs *regs, long error_code) -{ - nmi_enter(); - add_pda(__nmi_count,1); - if (!ignore_nmis) - default_do_nmi(regs); - nmi_exit(); -} - -void stop_nmi(void) -{ - acpi_nmi_disable(); - ignore_nmis++; -} - -void restart_nmi(void) -{ - ignore_nmis--; - acpi_nmi_enable(); -} - #ifdef CONFIG_SYSCTL static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index 6a048ce3c787..e4a380797dc1 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -76,7 +76,9 @@ asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); +int panic_on_unrecovered_nmi; static unsigned int code_bytes = 64; +static unsigned ignore_nmis; static inline void conditional_sti(struct pt_regs *regs) { @@ -867,6 +869,28 @@ asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) io_check_error(reason, regs); } +asmlinkage notrace __kprobes void +do_nmi(struct pt_regs *regs, long error_code) +{ + nmi_enter(); + add_pda(__nmi_count, 1); + if (!ignore_nmis) + default_do_nmi(regs); + nmi_exit(); +} + +void stop_nmi(void) +{ + acpi_nmi_disable(); + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; + acpi_nmi_enable(); +} + /* runs on IST stack. */ asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) { -- cgit v1.2.1 From d1b946b97d71423f365fa797d1428e1847c0bec1 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:34 +0400 Subject: x86: nmi_32.c - add "panic" option Allow to pass "panic" option in 32bit mode Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index bd04a28f7a5c..4437fe1edabc 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -42,6 +42,7 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE; * 0: the lapic NMI watchdog is disabled, but can be enabled */ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +static int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; @@ -140,6 +141,14 @@ static int __init setup_nmi_watchdog(char *str) { int nmi; + if (!strncmp(str, "panic", 5)) { + panic_on_timeout = 1; + str = strchr(str, ','); + if (!str) + return 1; + ++str; + } + get_option(&str, &nmi); if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) @@ -374,7 +383,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) * die_nmi will return ONLY if NOTIFY_STOP happens.. */ die_nmi("BUG: NMI Watchdog detected LOCKUP", - regs, 0); + regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); -- cgit v1.2.1 From 4b82b277707a39b97271439c475f186f63ec4692 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:35 +0400 Subject: x86: nmi_32.c - add nmi_watchdog_default helper Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 4437fe1edabc..7714e8478213 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,6 +51,17 @@ static DEFINE_PER_CPU(short, wd_enabled); static int endflag __initdata = 0; +/* Run after command line and cpu_init init, but before all other checks */ +void nmi_watchdog_default(void) +{ + if (nmi_watchdog != NMI_DEFAULT) + return; + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +} + #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all @@ -437,12 +448,8 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, return -EIO; } - if (nmi_watchdog == NMI_DEFAULT) { - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; - } + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); if (nmi_watchdog == NMI_LOCAL_APIC) { if (nmi_watchdog_enabled) -- cgit v1.2.1 From ad63ba169d45ccb6594eb35a6c31c421fe70ff45 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:36 +0400 Subject: x86: nmi_32/64.c - use apic_write_around instead of apic_write apic_write_around will be expanded to apic_write in 64bit mode anyway. Only a few CPUs (well, old CPUs to be precise) requires such an action. In general it should not hurt and could be cleaned up for apic_write (just in case) Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 2 +- arch/x86/kernel/nmi_64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 7714e8478213..ec5842b4dd68 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -248,7 +248,7 @@ void acpi_nmi_enable(void) static void __acpi_nmi_disable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); } /* diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index c1ea671525e5..f546e3164a74 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -215,7 +215,7 @@ late_initcall(init_lapic_nmi_sysfs); static void __acpi_nmi_enable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI); + apic_write_around(APIC_LVT0, APIC_DM_NMI); } /* @@ -229,7 +229,7 @@ void acpi_nmi_enable(void) static void __acpi_nmi_disable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); } /* -- cgit v1.2.1 From 6c8decdf14b17d42f6eb817d310642f4d6598a19 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:37 +0400 Subject: x86: nmi_32.c - unknown_nmi_panic_callback should always panic Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index ec5842b4dd68..d0b0684bde9e 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -425,7 +425,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) char buf[64]; sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 0); + die_nmi(buf, regs, 1); /* Always panic here */ return 0; } -- cgit v1.2.1 From 96f9dcb10755e96eae706b9e869c0dc25adb3d74 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:38 +0400 Subject: x86: nmi_64.c - use for_each_possible_cpu helper Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index f546e3164a74..d98b21cd4928 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -98,7 +98,7 @@ int __init check_nmi_watchdog(void) smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); #endif - for (cpu = 0; cpu < NR_CPUS; cpu++) + for_each_possible_cpu(cpu) prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks -- cgit v1.2.1 From 7c2ba83f9a479eee6f302147767a30f3187fbd4b Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:39 +0400 Subject: x86: nmi_32.c cleanup - use for_each_online_cpu helper Since cpu_online_map is touched (by for_each_online_cpu) at moment when cpu_callin_map is already filled up we can get rid of its checking at all Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index d0b0684bde9e..c6d0777aaf90 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -108,13 +108,7 @@ int __init check_nmi_watchdog(void) local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks - for_each_possible_cpu(cpu) { -#ifdef CONFIG_SMP - /* Check cpu_callin_map here because that is set - after the timer is started. */ - if (!cpu_isset(cpu, cpu_callin_map)) - continue; -#endif + for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { -- cgit v1.2.1 From fd5cea02de100197a4c26d9e103508cf09b50a82 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:40 +0400 Subject: x86: nmi_32/64.c - add helper functions to hide arch specific data Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 44 ++++++++++++++++++++++++++++++++------------ arch/x86/kernel/nmi_64.c | 42 +++++++++++++++++++++++++++++++----------- 2 files changed, 63 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index c6d0777aaf90..a94dbedf2b74 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,6 +51,26 @@ static DEFINE_PER_CPU(short, wd_enabled); static int endflag __initdata = 0; +static inline unsigned int get_nmi_count(int cpu) +{ + return nmi_count(cpu); +} + +static inline int mce_in_progress(void) +{ + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ + return per_cpu(irq_stat, cpu).apic_timer_irqs + + per_cpu(irq_stat, cpu).irq0_irqs; +} + /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { @@ -104,19 +124,19 @@ int __init check_nmi_watchdog(void) #endif for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = nmi_count(cpu); + prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { printk(KERN_WARNING "WARNING: CPU#%d: NMI " "appears to be stuck (%d->%d)!\n", cpu, prev_nmi_count[cpu], - nmi_count(cpu)); + get_nmi_count(cpu)); per_cpu(wd_enabled, cpu) = 0; atomic_dec(&nmi_active); } @@ -355,6 +375,13 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } + sum = get_timer_irqs(cpu); + + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + if (cpu_isset(cpu, backtrace_mask)) { static DEFINE_SPINLOCK(lock); /* Serialise the printks */ @@ -365,16 +392,9 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } - /* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ - sum = per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; + /* Could check oops_in_progress here too, but it's safer not to */ + if (mce_in_progress()) touched = 1; - } /* if the none of the timers isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index d98b21cd4928..c6802447262c 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -47,6 +47,30 @@ static unsigned int nmi_hz = HZ; static DEFINE_PER_CPU(short, wd_enabled); +static int endflag __initdata = 0; + +static inline unsigned int get_nmi_count(int cpu) +{ + return cpu_pda(cpu)->__nmi_count; +} + +static inline int mce_in_progress(void) +{ +#ifdef CONFIG_X86_MCE + return atomic_read(&mce_entry) > 0; +#endif + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ + return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); +} + /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { @@ -55,8 +79,6 @@ void nmi_watchdog_default(void) nmi_watchdog = NMI_NONE; } -static int endflag __initdata = 0; - #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all @@ -99,19 +121,19 @@ int __init check_nmi_watchdog(void) #endif for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; + prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) { + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { printk(KERN_WARNING "WARNING: CPU#%d: NMI " "appears to be stuck (%d->%d)!\n", cpu, prev_nmi_count[cpu], - cpu_pda(cpu)->__nmi_count); + get_nmi_count(cpu)); per_cpu(wd_enabled, cpu) = 0; atomic_dec(&nmi_active); } @@ -327,7 +349,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } - sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs); + sum = get_timer_irqs(cpu); + if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; @@ -343,12 +366,9 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } -#ifdef CONFIG_X86_MCE - /* Could check oops_in_progress here too, but it's safer - not too */ - if (atomic_read(&mce_entry) > 0) + if (mce_in_progress()) touched = 1; -#endif + /* if the apic timer isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* -- cgit v1.2.1 From 1798bc22b2790bf2a956588e6b17c36ef79ceff7 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:41 +0400 Subject: x86: nmi_32/64.c - merge down nmi_32.c and nmi_64.c to nmi.c Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/nmi.c | 533 +++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/nmi_32.c | 506 -------------------------------------------- arch/x86/kernel/nmi_64.c | 477 ------------------------------------------ 4 files changed, 534 insertions(+), 984 deletions(-) create mode 100644 arch/x86/kernel/nmi.c delete mode 100644 arch/x86/kernel/nmi_32.c delete mode 100644 arch/x86/kernel/nmi_64.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..d5dd6668225f 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -53,7 +53,7 @@ obj-$(CONFIG_X86_32_SMP) += smpcommon.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o +obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c new file mode 100644 index 000000000000..69a839fc1eb0 --- /dev/null +++ b/arch/x86/kernel/nmi.c @@ -0,0 +1,533 @@ +/* + * NMI watchdog support on APIC systems + * + * Started by Ingo Molnar + * + * Fixes: + * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. + * Mikael Pettersson : Power Management for local APIC NMI watchdog. + * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. + * Pavel Machek and + * Mikael Pettersson : PM converted to driver model. Disable/enable API. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include + +int unknown_nmi_panic; +int nmi_watchdog_enabled; + +static cpumask_t backtrace_mask = CPU_MASK_NONE; + +/* nmi_active: + * >0: the lapic NMI watchdog is active, but can be disabled + * <0: the lapic NMI watchdog has not been set up, and cannot + * be enabled + * 0: the lapic NMI watchdog is disabled, but can be enabled + */ +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +static int panic_on_timeout; + +unsigned int nmi_watchdog = NMI_DEFAULT; + +static unsigned int nmi_hz = HZ; +static DEFINE_PER_CPU(short, wd_enabled); +static int endflag __initdata = 0; + +static inline unsigned int get_nmi_count(int cpu) +{ +#ifdef CONFIG_X86_64 + return cpu_pda(cpu)->__nmi_count; +#else + return nmi_count(cpu); +#endif +} + +static inline int mce_in_progress(void) +{ +#if defined(CONFIX_X86_64) && defined(CONFIG_X86_MCE) + return atomic_read(&mce_entry) > 0; +#endif + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ +#ifdef CONFIG_X86_64 + return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); +#else + return per_cpu(irq_stat, cpu).apic_timer_irqs + + per_cpu(irq_stat, cpu).irq0_irqs; +#endif +} + +/* Run after command line and cpu_init init, but before all other checks */ +void nmi_watchdog_default(void) +{ + if (nmi_watchdog != NMI_DEFAULT) + return; +#ifdef CONFIG_X86_64 + nmi_watchdog = NMI_NONE; +#else + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +#endif +} + +#ifdef CONFIG_SMP +/* + * The performance counters used by NMI_LOCAL_APIC don't trigger when + * the CPU is idle. To make sure the NMI watchdog really ticks on all + * CPUs during the test make them busy. + */ +static __init void nmi_cpu_busy(void *data) +{ + local_irq_enable_in_hardirq(); + /* + * Intentionally don't use cpu_relax here. This is + * to make sure that the performance counter really ticks, + * even if there is a simulator or similar that catches the + * pause instruction. On a real HT machine this is fine because + * all other CPUs are busy with "useless" delay loops and don't + * care if they get somewhat less cycles. + */ + while (endflag == 0) + mb(); +} +#endif + +int __init check_nmi_watchdog(void) +{ + unsigned int *prev_nmi_count; + int cpu; + + if (nmi_watchdog == NMI_NONE || nmi_watchdog == NMI_DISABLED) + return 0; + + if (!atomic_read(&nmi_active)) + return 0; + + prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + if (!prev_nmi_count) + goto error; + + printk(KERN_INFO "Testing NMI watchdog ... "); + +#ifdef CONFIG_SMP + if (nmi_watchdog == NMI_LOCAL_APIC) + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); +#endif + + for_each_possible_cpu(cpu) + prev_nmi_count[cpu] = get_nmi_count(cpu); + local_irq_enable(); + mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ + + for_each_online_cpu(cpu) { + if (!per_cpu(wd_enabled, cpu)) + continue; + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { + printk(KERN_WARNING "WARNING: CPU#%d: NMI " + "appears to be stuck (%d->%d)!\n", + cpu, + prev_nmi_count[cpu], + get_nmi_count(cpu)); + per_cpu(wd_enabled, cpu) = 0; + atomic_dec(&nmi_active); + } + } + endflag = 1; + if (!atomic_read(&nmi_active)) { + kfree(prev_nmi_count); + atomic_set(&nmi_active, -1); + goto error; + } + printk("OK.\n"); + + /* + * now that we know it works we can reduce NMI frequency to + * something more reasonable; makes a difference in some configs + */ + if (nmi_watchdog == NMI_LOCAL_APIC) + nmi_hz = lapic_adjust_nmi_hz(1); + + kfree(prev_nmi_count); + return 0; + +error: +#ifdef CONFIG_X86_32 + timer_ack = !cpu_has_tsc; +#endif + return -1; +} + +static int __init setup_nmi_watchdog(char *str) +{ + int nmi; + + if (!strncmp(str, "panic", 5)) { + panic_on_timeout = 1; + str = strchr(str, ','); + if (!str) + return 1; + ++str; + } + + get_option(&str, &nmi); + + if (nmi >= NMI_INVALID || nmi < NMI_NONE) + return 0; + + nmi_watchdog = nmi; + return 1; +} +__setup("nmi_watchdog=", setup_nmi_watchdog); + +/* + * Suspend/resume support + */ +#ifdef CONFIG_PM + +static int nmi_pm_active; /* nmi_active before suspend */ + +static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) +{ + /* only CPU0 goes here, other CPUs should be offline */ + nmi_pm_active = atomic_read(&nmi_active); + stop_apic_nmi_watchdog(NULL); + BUG_ON(atomic_read(&nmi_active) != 0); + return 0; +} + +static int lapic_nmi_resume(struct sys_device *dev) +{ + /* only CPU0 goes here, other CPUs should be offline */ + if (nmi_pm_active > 0) { + setup_apic_nmi_watchdog(NULL); + touch_nmi_watchdog(); + } + return 0; +} + +static struct sysdev_class nmi_sysclass = { + .name = "lapic_nmi", + .resume = lapic_nmi_resume, + .suspend = lapic_nmi_suspend, +}; + +static struct sys_device device_lapic_nmi = { + .id = 0, + .cls = &nmi_sysclass, +}; + +static int __init init_lapic_nmi_sysfs(void) +{ + int error; + + /* + * should really be a BUG_ON but b/c this is an + * init call, it just doesn't work. -dcz + */ + if (nmi_watchdog != NMI_LOCAL_APIC) + return 0; + + if (atomic_read(&nmi_active) < 0) + return 0; + + error = sysdev_class_register(&nmi_sysclass); + if (!error) + error = sysdev_register(&device_lapic_nmi); + return error; +} + +/* must come after the local APIC's device_initcall() */ +late_initcall(init_lapic_nmi_sysfs); + +#endif /* CONFIG_PM */ + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} + +static void __acpi_nmi_disable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +void setup_apic_nmi_watchdog(void *unused) +{ + if (__get_cpu_var(wd_enabled)) + return; + + /* cheap hack to support suspend/resume */ + /* if cpu0 is not active neither should the other cpus */ + if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) + return; + + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + /* enable it before to avoid race with handler */ + __get_cpu_var(wd_enabled) = 1; + if (lapic_watchdog_init(nmi_hz) < 0) { + __get_cpu_var(wd_enabled) = 0; + return; + } + /* FALL THROUGH */ + case NMI_IO_APIC: + __get_cpu_var(wd_enabled) = 1; + atomic_inc(&nmi_active); + } +} + +void stop_apic_nmi_watchdog(void *unused) +{ + /* only support LOCAL and IO APICs for now */ + if (nmi_watchdog != NMI_LOCAL_APIC && + nmi_watchdog != NMI_IO_APIC) + return; + if (__get_cpu_var(wd_enabled) == 0) + return; + if (nmi_watchdog == NMI_LOCAL_APIC) + lapic_watchdog_stop(); + __get_cpu_var(wd_enabled) = 0; + atomic_dec(&nmi_active); +} + +/* + * the best way to detect whether a CPU has a 'hard lockup' problem + * is to check it's local APIC timer IRQ counts. If they are not + * changing then that CPU has some problem. + * + * as these watchdog NMI IRQs are generated on every CPU, we only + * have to check the current processor. + * + * since NMIs don't listen to _any_ locks, we have to be extremely + * careful not to rely on unsafe variables. The printk might lock + * up though, so we have to break up any console locks first ... + * [when there will be more tty-related locks, break them up here too!] + */ + +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); + +void touch_nmi_watchdog(void) +{ + if (nmi_watchdog > 0) { + unsigned cpu; + + /* + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. + */ + for_each_present_cpu(cpu) { + if (per_cpu(nmi_touch, cpu) != 1) + per_cpu(nmi_touch, cpu) = 1; + } + } + + /* + * Tickle the softlockup detector too: + */ + touch_softlockup_watchdog(); +} +EXPORT_SYMBOL(touch_nmi_watchdog); + +notrace __kprobes int +nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) +{ + /* + * Since current_thread_info()-> is always on the stack, and we + * always switch the stack NMI-atomically, it's safe to use + * smp_processor_id(). + */ + unsigned int sum; + int touched = 0; + int cpu = smp_processor_id(); + int rc = 0; + + /* check for other users first */ + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) { + rc = 1; + touched = 1; + } + + sum = get_timer_irqs(cpu); + + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + + if (cpu_isset(cpu, backtrace_mask)) { + static DEFINE_SPINLOCK(lock); /* Serialise the printks */ + + spin_lock(&lock); + printk("NMI backtrace for cpu %d\n", cpu); + dump_stack(); + spin_unlock(&lock); + cpu_clear(cpu, backtrace_mask); + } + + /* Could check oops_in_progress here too, but it's safer not to */ + if (mce_in_progress()) + touched = 1; + + /* if the none of the timers isn't firing, this cpu isn't doing much */ + if (!touched && __get_cpu_var(last_irq_sum) == sum) { + /* + * Ayiee, looks like this CPU is stuck ... + * wait a few IRQs (5 seconds) before doing the oops ... + */ + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz) + /* + * die_nmi will return ONLY if NOTIFY_STOP happens.. + */ + die_nmi("BUG: NMI Watchdog detected LOCKUP", + regs, panic_on_timeout); + } else { + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); + } + + /* see if the nmi watchdog went off */ + if (!__get_cpu_var(wd_enabled)) + return rc; + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + rc |= lapic_wd_event(nmi_hz); + break; + case NMI_IO_APIC: + /* + * don't know how to accurately check for this. + * just assume it was a watchdog timer interrupt + * This matches the old behaviour. + */ + rc = 1; + break; + } + return rc; +} + +#ifdef CONFIG_SYSCTL + +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) +{ + unsigned char reason = get_nmi_reason(); + char buf[64]; + + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(buf, regs, 1); /* Always panic here */ + return 0; +} + +/* + * proc handler for /proc/sys/kernel/nmi + */ +int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, + void __user *buffer, size_t *length, loff_t *ppos) +{ + int old_state; + + nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; + old_state = nmi_watchdog_enabled; + proc_dointvec(table, write, file, buffer, length, ppos); + if (!!old_state == !!nmi_watchdog_enabled) + return 0; + + if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { + printk(KERN_WARNING + "NMI watchdog is permanently disabled\n"); + return -EIO; + } + + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); + + if (nmi_watchdog == NMI_LOCAL_APIC) { + if (nmi_watchdog_enabled) + enable_lapic_nmi_watchdog(); + else + disable_lapic_nmi_watchdog(); + } else { + printk(KERN_WARNING + "NMI watchdog doesn't know what hardware to touch\n"); + return -EIO; + } + return 0; +} + +#endif /* CONFIG_SYSCTL */ + +int do_nmi_callback(struct pt_regs *regs, int cpu) +{ +#ifdef CONFIG_SYSCTL + if (unknown_nmi_panic) + return unknown_nmi_panic_callback(regs, cpu); +#endif + return 0; +} + +void __trigger_all_cpu_backtrace(void) +{ + int i; + + backtrace_mask = cpu_online_map; + /* Wait for up to 10 seconds for all CPUs to do the backtrace */ + for (i = 0; i < 10 * 1000; i++) { + if (cpus_empty(backtrace_mask)) + break; + mdelay(1); + } +} + +EXPORT_SYMBOL(nmi_active); +EXPORT_SYMBOL(nmi_watchdog); + diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c deleted file mode 100644 index a94dbedf2b74..000000000000 --- a/arch/x86/kernel/nmi_32.c +++ /dev/null @@ -1,506 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "mach_traps.h" - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -static int endflag __initdata = 0; - -static inline unsigned int get_nmi_count(int cpu) -{ - return nmi_count(cpu); -} - -static inline int mce_in_progress(void) -{ - return 0; -} - -/* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ -static inline unsigned int get_timer_irqs(int cpu) -{ - return per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; -} - -/* Run after command line and cpu_init init, but before all other checks */ -void nmi_watchdog_default(void) -{ - if (nmi_watchdog != NMI_DEFAULT) - return; - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; -} - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - goto error; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = get_nmi_count(cpu); - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - get_nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - goto error; - } - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -error: - timer_ack = !cpu_has_tsc; - - return -1; -} - -static int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - if (!strncmp(str, "panic", 5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - - -/* Suspend/resume support */ - -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */ - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - /* - * Tickle the softlockup detector too: - */ - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - - /* - * Since current_thread_info()-> is always on the stack, and we - * always switch the stack NMI-atomically, it's safe to use - * smp_processor_id(). - */ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - sum = get_timer_irqs(cpu); - - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - - /* Could check oops_in_progress here too, but it's safer not to */ - if (mce_in_progress()) - touched = 1; - - /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - /* - * die_nmi will return ONLY if NOTIFY_STOP happens.. - */ - die_nmi("BUG: NMI Watchdog detected LOCKUP", - regs, panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); - } - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - /* if nmi_watchdog is not set yet, then set it */ - nmi_watchdog_default(); - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c deleted file mode 100644 index c6802447262c..000000000000 --- a/arch/x86/kernel/nmi_64.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -static int endflag __initdata = 0; - -static inline unsigned int get_nmi_count(int cpu) -{ - return cpu_pda(cpu)->__nmi_count; -} - -static inline int mce_in_progress(void) -{ -#ifdef CONFIG_X86_MCE - return atomic_read(&mce_entry) > 0; -#endif - return 0; -} - -/* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ -static inline unsigned int get_timer_irqs(int cpu) -{ - return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); -} - -/* Run after command line and cpu_init init, but before all other checks */ -void nmi_watchdog_default(void) -{ - if (nmi_watchdog != NMI_DEFAULT) - return; - nmi_watchdog = NMI_NONE; -} - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - return -1; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = get_nmi_count(cpu); - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - get_nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - return -1; - } - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -} - -static int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - if (!strncmp(str,"panic",5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - sum = get_timer_irqs(cpu); - - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - - if (mce_in_progress()) - touched = 1; - - /* if the apic timer isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP", - regs, panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); - } - - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - /* if nmi_watchdog is not set yet, then set it */ - nmi_watchdog_default(); - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); -- cgit v1.2.1 From ccbfac2923c9febaeaf07a50054027a92b502718 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 14:31:07 -0400 Subject: ftrace: powerpc clean ups This patch cleans up the ftrace code in PowerPC based on the comments from Michael Ellerman. Signed-off-by: Steven Rostedt Cc: Michael Ellerman Cc: proski@gnu.org Cc: a.p.zijlstra@chello.nl Cc: Pekka Paalanen Cc: Steven Rostedt Cc: linuxppc-dev@ozlabs.org Cc: Soeren Sandmann Pedersen Cc: paulus@samba.org Signed-off-by: Thomas Gleixner --- arch/powerpc/kernel/entry_32.S | 11 ++--------- arch/powerpc/kernel/ftrace.c | 8 +++++++- arch/powerpc/kernel/ppc_ksyms.c | 5 +++++ arch/powerpc/kernel/setup_32.c | 5 ----- arch/powerpc/kernel/setup_64.c | 5 ----- 5 files changed, 14 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 0e6221889ca9..3b1dd29d9f91 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -1129,18 +1129,11 @@ _GLOBAL(_mcount) stw r5, 8(r1) LOAD_REG_ADDR(r5, ftrace_trace_function) -#if 0 - mtctr r3 - mr r1, r5 - bctrl -#endif lwz r5,0(r5) -#if 1 + mtctr r5 bctrl -#else - bl ftrace_stub -#endif + nop lwz r6, 8(r1) diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 5a4993fefa45..69ed41223468 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -51,10 +51,16 @@ notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) { static unsigned int op; + /* + * It would be nice to just use create_function_call, but that will + * update the code itself. Here we need to just return the + * instruction that is going to be modified, without modifying the + * code. + */ addr = GET_ADDR(addr); /* Set to "bl addr" */ - op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffe); + op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffc); /* * No locking needed, this must be called via kstop_machine diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index cf6b5a7d8b3f..4300db52662a 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -43,6 +43,7 @@ #include #include #include +#include #ifdef CONFIG_PPC32 extern void transfer_to_handler(void); @@ -68,6 +69,10 @@ EXPORT_SYMBOL(single_step_exception); EXPORT_SYMBOL(sys_sigreturn); #endif +#ifdef CONFIG_FTRACE +EXPORT_SYMBOL(_mcount); +#endif + EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 22f8e2bacd32..19e8fcb9cea8 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -47,11 +47,6 @@ #include #endif -#ifdef CONFIG_FTRACE -extern void _mcount(void); -EXPORT_SYMBOL(_mcount); -#endif - extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 277bf18cbbcc..098fd96a394a 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -85,11 +85,6 @@ struct ppc64_caches ppc64_caches = { }; EXPORT_SYMBOL_GPL(ppc64_caches); -#ifdef CONFIG_FTRACE -extern void _mcount(void); -EXPORT_SYMBOL(_mcount); -#endif - /* * These are used in binfmt_elf.c to put aux entries on the stack * for each elf executable being started. -- cgit v1.2.1 From 7b1333aa4cb546ddeb9c05098a53d9a777623a05 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:01 +0100 Subject: xen: use hypercall rather than clts Xen will trap and emulate clts, but its better to use a hypercall. Also, xenner doesn't handle clts. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a05b7721bc81..446f4cd649e6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -607,6 +607,30 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, xen_mc_issue(PARAVIRT_LAZY_MMU); } +static void xen_clts(void) +{ + struct multicall_space mcs; + + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + +static void xen_write_cr0(unsigned long cr0) +{ + struct multicall_space mcs; + + /* Only pay attention to cr0.TS; everything else is + ignored. */ + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + static void xen_write_cr2(unsigned long cr2) { x86_read_percpu(xen_vcpu)->arch.cr2 = cr2; @@ -978,10 +1002,10 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = { .set_debugreg = xen_set_debugreg, .get_debugreg = xen_get_debugreg, - .clts = native_clts, + .clts = xen_clts, .read_cr0 = native_read_cr0, - .write_cr0 = native_write_cr0, + .write_cr0 = xen_write_cr0, .read_cr4 = native_read_cr4, .read_cr4_safe = native_read_cr4_safe, -- cgit v1.2.1 From 349c709f42453707f74bece0d9d35ee5b3842893 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:02 +0100 Subject: xen: use new sched_op Use the new sched_op hypercall, mainly because xenner doesn't support the old one. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 446f4cd649e6..35ddaf50180a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -254,7 +254,7 @@ static void xen_irq_enable(void) static void xen_safe_halt(void) { /* Blocking includes an implicit local_irq_enable(). */ - if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0) + if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0) BUG(); } @@ -1138,11 +1138,13 @@ static const struct smp_ops xen_smp_ops __initdata = { static void xen_reboot(int reason) { + struct sched_shutdown r = { .reason = reason }; + #ifdef CONFIG_SMP smp_send_stop(); #endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason)) + if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } -- cgit v1.2.1 From 2956a3511c8c5dccb1d4739ead17c7c3c23a24b7 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:04 +0100 Subject: xen: allow some cr4 updates The guest can legitimately change things like cr4.OSFXSR and OSXMMEXCPT, so let it. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 35ddaf50180a..f6876485ee7d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -648,8 +648,10 @@ static unsigned long xen_read_cr2_direct(void) static void xen_write_cr4(unsigned long cr4) { - /* Just ignore cr4 changes; Xen doesn't allow us to do - anything anyway. */ + cr4 &= ~X86_CR4_PGE; + cr4 &= ~X86_CR4_PSE; + + native_write_cr4(cr4); } static unsigned long xen_read_cr3(void) -- cgit v1.2.1 From 239d1fc04ed0b58d638096b12a7f6d50269d30c9 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:05 +0100 Subject: xen: don't worry about preempt during xen_irq_enable() When enabling interrupts, we don't need to worry about preemption, because we either enter with interrupts disabled - so no preemption - or the caller is confused and is re-enabling interrupts on some indeterminate processor. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f6876485ee7d..4a372b71239d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -235,13 +235,13 @@ static void xen_irq_enable(void) { struct vcpu_info *vcpu; - /* There's a one instruction preempt window here. We need to - make sure we're don't switch CPUs between getting the vcpu - pointer and updating the mask. */ - preempt_disable(); + /* We don't need to worry about being preempted here, since + either a) interrupts are disabled, so no preemption, or b) + the caller is confused and is trying to re-enable interrupts + on an indeterminate processor. */ + vcpu = x86_read_percpu(xen_vcpu); vcpu->evtchn_upcall_mask = 0; - preempt_enable_no_resched(); /* Doesn't matter if we get preempted here, because any pending event will get dealt with anyway. */ -- cgit v1.2.1 From a15af1c9ea2750a9ff01e51615c45950bad8221b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:06 +0100 Subject: x86/paravirt: add pte_flags to just get pte flags Add pte_flags() to extract the flags from a pte. This is a special case of pte_val() which is only guaranteed to return the pte's flags correctly; the page number may be corrupted or missing. The intent is to allow paravirt implementations to return pte flags without having to do any translation of the page number (most notably, Xen). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/paravirt.c | 1 + arch/x86/xen/enlighten.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 74f0c5ea2a03..c98d54688180 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -403,6 +403,7 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, + .pte_flags = native_pte_val, .pgd_val = native_pgd_val, .make_pte = native_make_pte, diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4a372b71239d..1b4b5fa498b3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1101,6 +1101,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pmd = xen_set_pmd, .pte_val = xen_pte_val, + .pte_flags = native_pte_val, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, -- cgit v1.2.1 From 9e124fe16ff24746d6de5a2ad685266d7bce0e08 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:07 +0100 Subject: xen: Enable console tty by default in domU if it's not a dummy Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 1b4b5fa498b3..6cfb708408e9 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1256,8 +1256,10 @@ asmlinkage void __init xen_start_kernel(void) ? __pa(xen_start_info->mod_start) : 0; boot_params.hdr.ramdisk_size = xen_start_info->mod_len; - if (!is_initial_xendomain()) + if (!is_initial_xendomain()) { + add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + } /* Start the world */ start_kernel(); -- cgit v1.2.1 From 83abc70a4c6e306f4c1672e25884322f797e4fcb Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:12 +0100 Subject: xen: make earlyprintk=xen work again For some perverse reason, if you call add_preferred_console() it prevents setup_early_printk() from successfully enabling the boot console - unless you make it a preferred console too... Also, make xenboot console output distinct from normal console output, since it gets repeated when the console handover happens, and the duplicated output is confusing without disambiguation. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner Cc: Markus Armbruster Cc: Gerd Hoffmann --- arch/x86/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 6cfb708408e9..5c0635a8bffd 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1257,6 +1257,7 @@ asmlinkage void __init xen_start_kernel(void) boot_params.hdr.ramdisk_size = xen_start_info->mod_len; if (!is_initial_xendomain()) { + add_preferred_console("xenboot", 0, NULL); add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); } -- cgit v1.2.1 From ec9b2065d4d3b797604c09a569083dd9ff951b1b Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 26 May 2008 23:31:13 +0100 Subject: xen: Move manage.c to drivers/xen for ia64/xen support move arch/x86/xen/manage.c under drivers/xen/to share codes with x86 and ia64. ia64/xen also uses manage.c Signed-off-by: Isaku Yamahata Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Makefile | 2 +- arch/x86/xen/manage.c | 143 -------------------------------------------------- 2 files changed, 1 insertion(+), 144 deletions(-) delete mode 100644 arch/x86/xen/manage.c (limited to 'arch') diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3d8df981d5fd..40b119b6b103 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o manage.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/manage.c b/arch/x86/xen/manage.c deleted file mode 100644 index aa7af9e6abc0..000000000000 --- a/arch/x86/xen/manage.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Handle extern requests for shutdown, reboot and sysrq - */ -#include -#include -#include -#include - -#include - -#define SHUTDOWN_INVALID -1 -#define SHUTDOWN_POWEROFF 0 -#define SHUTDOWN_SUSPEND 2 -/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only - * report a crash, not be instructed to crash! - * HALT is the same as POWEROFF, as far as we're concerned. The tools use - * the distinction when we return the reason code to them. - */ -#define SHUTDOWN_HALT 4 - -/* Ignore multiple shutdown requests. */ -static int shutting_down = SHUTDOWN_INVALID; - -static void shutdown_handler(struct xenbus_watch *watch, - const char **vec, unsigned int len) -{ - char *str; - struct xenbus_transaction xbt; - int err; - - if (shutting_down != SHUTDOWN_INVALID) - return; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - - str = (char *)xenbus_read(xbt, "control", "shutdown", NULL); - /* Ignore read errors and empty reads. */ - if (XENBUS_IS_ERR_READ(str)) { - xenbus_transaction_end(xbt, 1); - return; - } - - xenbus_write(xbt, "control", "shutdown", ""); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) { - kfree(str); - goto again; - } - - if (strcmp(str, "poweroff") == 0 || - strcmp(str, "halt") == 0) - orderly_poweroff(false); - else if (strcmp(str, "reboot") == 0) - ctrl_alt_del(); - else { - printk(KERN_INFO "Ignoring shutdown request: %s\n", str); - shutting_down = SHUTDOWN_INVALID; - } - - kfree(str); -} - -static void sysrq_handler(struct xenbus_watch *watch, const char **vec, - unsigned int len) -{ - char sysrq_key = '\0'; - struct xenbus_transaction xbt; - int err; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) { - printk(KERN_ERR "Unable to read sysrq code in " - "control/sysrq\n"); - xenbus_transaction_end(xbt, 1); - return; - } - - if (sysrq_key != '\0') - xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) - goto again; - - if (sysrq_key != '\0') - handle_sysrq(sysrq_key, NULL); -} - -static struct xenbus_watch shutdown_watch = { - .node = "control/shutdown", - .callback = shutdown_handler -}; - -static struct xenbus_watch sysrq_watch = { - .node = "control/sysrq", - .callback = sysrq_handler -}; - -static int setup_shutdown_watcher(void) -{ - int err; - - err = register_xenbus_watch(&shutdown_watch); - if (err) { - printk(KERN_ERR "Failed to set shutdown watcher\n"); - return err; - } - - err = register_xenbus_watch(&sysrq_watch); - if (err) { - printk(KERN_ERR "Failed to set sysrq watcher\n"); - return err; - } - - return 0; -} - -static int shutdown_event(struct notifier_block *notifier, - unsigned long event, - void *data) -{ - setup_shutdown_watcher(); - return NOTIFY_DONE; -} - -static int __init setup_shutdown_event(void) -{ - static struct notifier_block xenstore_notifier = { - .notifier_call = shutdown_event - }; - register_xenstore_notifier(&xenstore_notifier); - - return 0; -} - -subsys_initcall(setup_shutdown_event); -- cgit v1.2.1 From 38bb5ab4179572f4d24d3ca7188172a31ca51a69 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:16 +0100 Subject: xen: count resched interrupts properly Make sure resched interrupts appear in /proc/interrupts in the proper place. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/smp.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 94e69000f982..74ab8968c525 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -65,6 +65,12 @@ static struct call_data_struct *call_data; */ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) { +#ifdef CONFIG_X86_32 + __get_cpu_var(irq_stat).irq_resched_count++; +#else + add_pda(irq_resched_count, 1); +#endif + return IRQ_HANDLED; } -- cgit v1.2.1 From d451bb7aa852627bdf7be7937dc3d9d9f261b235 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:18 +0100 Subject: xen: make phys_to_machine structure dynamic We now support the use of memory hotplug, so the physical to machine page mapping structure must be dynamic. This is implemented as a two-level radix tree structure, which allows us to efficiently incrementally allocate memory for the p2m table as new pages are added. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 2 +- arch/x86/xen/mmu.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/xen/setup.c | 2 -- arch/x86/xen/xen-ops.h | 2 ++ 4 files changed, 88 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 5c0635a8bffd..73d3c84a3495 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1221,7 +1221,7 @@ asmlinkage void __init xen_start_kernel(void) /* Get mfn list */ if (!xen_feature(XENFEAT_auto_translated_physmap)) - phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list; + xen_build_dynamic_phys_to_machine(); pgd = (pgd_t *)xen_start_info->pt_base; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 07c2653ec335..c3b27dec6f03 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,6 +56,91 @@ #include "multicalls.h" #include "mmu.h" +/* + * This should probably be a config option. On 32-bit, it costs 1 + * page/gig of memory; on 64-bit its 2 pages/gig. If we want it to be + * completely unbounded we can add another level to the p2m structure. + */ +#define MAX_GUEST_PAGES (16ull * 1024*1024*1024 / PAGE_SIZE) +#define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) + +static unsigned long *p2m_top[MAX_GUEST_PAGES / P2M_ENTRIES_PER_PAGE]; + +static inline unsigned p2m_top_index(unsigned long pfn) +{ + BUG_ON(pfn >= MAX_GUEST_PAGES); + return pfn / P2M_ENTRIES_PER_PAGE; +} + +static inline unsigned p2m_index(unsigned long pfn) +{ + return pfn % P2M_ENTRIES_PER_PAGE; +} + +void __init xen_build_dynamic_phys_to_machine(void) +{ + unsigned pfn; + unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + + BUG_ON(xen_start_info->nr_pages >= MAX_GUEST_PAGES); + + for(pfn = 0; + pfn < xen_start_info->nr_pages; + pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top[topidx] = &mfn_list[pfn]; + } +} + +unsigned long get_phys_to_machine(unsigned long pfn) +{ + unsigned topidx, idx; + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == NULL) + return INVALID_P2M_ENTRY; + + idx = p2m_index(pfn); + return p2m_top[topidx][idx]; +} + +static void alloc_p2m(unsigned long **pp) +{ + unsigned long *p; + unsigned i; + + p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL); + BUG_ON(p == NULL); + + for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) + p[i] = INVALID_P2M_ENTRY; + + if (cmpxchg(pp, NULL, p) != NULL) + free_page((unsigned long)p); +} + +void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + unsigned topidx, idx; + + if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) { + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return; + } + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == NULL) { + /* no need to allocate a page to store an invalid entry */ + if (mfn == INVALID_P2M_ENTRY) + return; + alloc_p2m(&p2m_top[topidx]); + } + + idx = p2m_index(pfn); + p2m_top[topidx][idx] = mfn; +} + xmaddr_t arbitrary_virt_to_machine(unsigned long address) { unsigned int level; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 82517e4a752a..37f8f0b8f743 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -27,8 +27,6 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; -unsigned long *phys_to_machine_mapping; -EXPORT_SYMBOL(phys_to_machine_mapping); /** * machine_specific_memory_setup - Hook for machine specific memory setup. diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index f1063ae08037..7bdc8c5c9244 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -22,6 +22,8 @@ void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void __init xen_build_dynamic_phys_to_machine(void); + void xen_setup_timer(int cpu); void xen_setup_cpu_clockevents(void); unsigned long xen_cpu_khz(void); -- cgit v1.2.1 From 8006ec3e911f93d702e1d4a4e387e244ab434924 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:19 +0100 Subject: xen: add configurable max domain size Add a config option to set the max size of a Xen domain. This is used to scale the size of the physical-to-machine array; it ends up using around 1 page/GByte, so there's no reason to be very restrictive. For a 32-bit guest, the default value of 8GB is probably sufficient; there's not much point in giving a 32-bit machine much more memory than that. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Kconfig | 10 ++++++++++ arch/x86/xen/mmu.c | 25 ++++++++++++------------- arch/x86/xen/setup.c | 3 +++ 3 files changed, 25 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 525b108411bd..d0f1c7c5dc3d 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -11,3 +11,13 @@ config XEN This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the Xen hypervisor. + +config XEN_MAX_DOMAIN_MEMORY + int "Maximum allowed size of a domain in gigabytes" + default 8 + depends on XEN + help + The pseudo-physical to machine address array is sized + according to the maximum possible memory size of a Xen + domain. This array uses 1 page per gigabyte, so there's no + need to be too stingy here. \ No newline at end of file diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index c3b27dec6f03..644232aa7bfb 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,19 +56,13 @@ #include "multicalls.h" #include "mmu.h" -/* - * This should probably be a config option. On 32-bit, it costs 1 - * page/gig of memory; on 64-bit its 2 pages/gig. If we want it to be - * completely unbounded we can add another level to the p2m structure. - */ -#define MAX_GUEST_PAGES (16ull * 1024*1024*1024 / PAGE_SIZE) #define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) -static unsigned long *p2m_top[MAX_GUEST_PAGES / P2M_ENTRIES_PER_PAGE]; +static unsigned long *p2m_top[MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE]; static inline unsigned p2m_top_index(unsigned long pfn) { - BUG_ON(pfn >= MAX_GUEST_PAGES); + BUG_ON(pfn >= MAX_DOMAIN_PAGES); return pfn / P2M_ENTRIES_PER_PAGE; } @@ -81,12 +75,9 @@ void __init xen_build_dynamic_phys_to_machine(void) { unsigned pfn; unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); - BUG_ON(xen_start_info->nr_pages >= MAX_GUEST_PAGES); - - for(pfn = 0; - pfn < xen_start_info->nr_pages; - pfn += P2M_ENTRIES_PER_PAGE) { + for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { unsigned topidx = p2m_top_index(pfn); p2m_top[topidx] = &mfn_list[pfn]; @@ -97,6 +88,9 @@ unsigned long get_phys_to_machine(unsigned long pfn) { unsigned topidx, idx; + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) + return INVALID_P2M_ENTRY; + topidx = p2m_top_index(pfn); if (p2m_top[topidx] == NULL) return INVALID_P2M_ENTRY; @@ -129,6 +123,11 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) return; } + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) { + BUG_ON(mfn != INVALID_P2M_ENTRY); + return; + } + topidx = p2m_top_index(pfn); if (p2m_top[topidx] == NULL) { /* no need to allocate a page to store an invalid entry */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 37f8f0b8f743..488447878a9d 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -36,6 +37,8 @@ char * __init xen_memory_setup(void) { unsigned long max_pfn = xen_start_info->nr_pages; + max_pfn = min(MAX_DOMAIN_PAGES, max_pfn); + e820.nr_map = 0; add_memory_region(0, LOWMEMSIZE(), E820_RAM); add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); -- cgit v1.2.1 From cf0923ea295ba08ae656ef04164a43cb6553ba99 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:20 +0100 Subject: xen: efficiently support a holey p2m table When using sparsemem and memory hotplug, the kernel's pseudo-physical address space can be discontigious. Previously this was dealt with by having the upper parts of the radix tree stubbed off. Unfortunately, this is incompatible with save/restore, which requires a complete p2m table. The solution is to have a special distinguished all-invalid p2m leaf page, which we can point all the hole areas at. This allows the tools to see a complete p2m table, but it only costs a page for all memory holes. It also simplifies the code since it removes a few special cases. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/mmu.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 644232aa7bfb..da7b45b05066 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -57,8 +57,17 @@ #include "mmu.h" #define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) +#define TOP_ENTRIES (MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE) -static unsigned long *p2m_top[MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE]; +/* Placeholder for holes in the address space */ +static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL }; + + /* Array of pointers to pages containing p2m entries */ +static unsigned long *p2m_top[TOP_ENTRIES] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; static inline unsigned p2m_top_index(unsigned long pfn) { @@ -92,9 +101,6 @@ unsigned long get_phys_to_machine(unsigned long pfn) return INVALID_P2M_ENTRY; topidx = p2m_top_index(pfn); - if (p2m_top[topidx] == NULL) - return INVALID_P2M_ENTRY; - idx = p2m_index(pfn); return p2m_top[topidx][idx]; } @@ -110,7 +116,7 @@ static void alloc_p2m(unsigned long **pp) for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) p[i] = INVALID_P2M_ENTRY; - if (cmpxchg(pp, NULL, p) != NULL) + if (cmpxchg(pp, p2m_missing, p) != p2m_missing) free_page((unsigned long)p); } @@ -129,7 +135,7 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) } topidx = p2m_top_index(pfn); - if (p2m_top[topidx] == NULL) { + if (p2m_top[topidx] == p2m_missing) { /* no need to allocate a page to store an invalid entry */ if (mfn == INVALID_P2M_ENTRY) return; -- cgit v1.2.1 From a0d695c821544947342a2d372ec4108bc813b979 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:21 +0100 Subject: xen: make dummy_shared_info non-static Rename dummy_shared_info to xen_dummy_shared_info and make it non-static, in anticipation of users outside of enlighten.c Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 +++--- arch/x86/xen/xen-ops.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 73d3c84a3495..d9faaa26c104 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -75,13 +75,13 @@ DEFINE_PER_CPU(unsigned long, xen_current_cr3); /* actual vcpu cr3 */ struct start_info *xen_start_info; EXPORT_SYMBOL_GPL(xen_start_info); -static /* __initdata */ struct shared_info dummy_shared_info; +struct shared_info xen_dummy_shared_info; /* * Point at some empty memory to start with. We map the real shared_info * page as soon as fixmap is up and running. */ -struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; +struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; /* * Flag to determine whether vcpu info placement is available on all @@ -104,7 +104,7 @@ static void __init xen_vcpu_setup(int cpu) int err; struct vcpu_info *vcpup; - BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info); + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; if (!have_vcpu_info_placement) diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 7bdc8c5c9244..826d6e4c3dac 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -15,6 +15,7 @@ DECLARE_PER_CPU(unsigned long, xen_cr3); DECLARE_PER_CPU(unsigned long, xen_current_cr3); extern struct start_info *xen_start_info; +extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; char * __init xen_memory_setup(void); -- cgit v1.2.1 From d5edbc1f75420935b1ec7e65df10c8f81cea82de Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:22 +0100 Subject: xen: add p2m mfn_list_list When saving a domain, the Xen tools need to remap all our mfns to portable pfns. In order to remap our p2m table, it needs to know where all its pages are, so maintain the references to the p2m table for it to use. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 2 ++ arch/x86/xen/mmu.c | 39 ++++++++++++++++++++++++++++++++++++--- arch/x86/xen/xen-ops.h | 2 ++ 3 files changed, 40 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index d9faaa26c104..ce67dc8f36af 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -880,6 +880,8 @@ static __init void setup_shared_info(void) /* In UP this is as good a place as any to set up shared info */ xen_setup_vcpu_info_placement(); #endif + + xen_setup_mfn_list_list(); } static __init void xen_pagetable_setup_done(pgd_t *base) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index da7b45b05066..4740cda36563 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -69,6 +69,13 @@ static unsigned long *p2m_top[TOP_ENTRIES] __attribute__((section(".data.page_aligned"))) = { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; +/* Arrays of p2m arrays expressed in mfns used for save/restore */ +static unsigned long p2m_top_mfn[TOP_ENTRIES] + __attribute__((section(".bss.page_aligned"))); + +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] + __attribute__((section(".bss.page_aligned"))); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_DOMAIN_PAGES); @@ -80,11 +87,35 @@ static inline unsigned p2m_index(unsigned long pfn) return pfn % P2M_ENTRIES_PER_PAGE; } +/* Build the parallel p2m_top_mfn structures */ +void xen_setup_mfn_list_list(void) +{ + unsigned pfn, idx; + + for(pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top_mfn[topidx] = virt_to_mfn(p2m_top[topidx]); + } + + for(idx = 0; idx < ARRAY_SIZE(p2m_top_mfn_list); idx++) { + unsigned topidx = idx * P2M_ENTRIES_PER_PAGE; + p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]); + } + + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); + + HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list = + virt_to_mfn(p2m_top_mfn_list); + HYPERVISOR_shared_info->arch.max_pfn = xen_start_info->nr_pages; +} + +/* Set up p2m_top to point to the domain-builder provided p2m pages */ void __init xen_build_dynamic_phys_to_machine(void) { - unsigned pfn; unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); + unsigned pfn; for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { unsigned topidx = p2m_top_index(pfn); @@ -105,7 +136,7 @@ unsigned long get_phys_to_machine(unsigned long pfn) return p2m_top[topidx][idx]; } -static void alloc_p2m(unsigned long **pp) +static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) { unsigned long *p; unsigned i; @@ -118,6 +149,8 @@ static void alloc_p2m(unsigned long **pp) if (cmpxchg(pp, p2m_missing, p) != p2m_missing) free_page((unsigned long)p); + else + *mfnp = virt_to_mfn(p); } void set_phys_to_machine(unsigned long pfn, unsigned long mfn) @@ -139,7 +172,7 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) /* no need to allocate a page to store an invalid entry */ if (mfn == INVALID_P2M_ENTRY) return; - alloc_p2m(&p2m_top[topidx]); + alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]); } idx = p2m_index(pfn); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 826d6e4c3dac..a1bc89a8f169 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -18,6 +18,8 @@ extern struct start_info *xen_start_info; extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; +void xen_setup_mfn_list_list(void); + char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); -- cgit v1.2.1 From 0e91398f2a5d4eb6b07df8115917d0d1cf3e9b58 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:27 +0100 Subject: xen: implement save/restore This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Makefile | 2 +- arch/x86/xen/enlighten.c | 6 +++--- arch/x86/xen/mmu.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/xen/smp.c | 2 +- arch/x86/xen/suspend.c | 42 ++++++++++++++++++++++++++++++++++++++++++ arch/x86/xen/time.c | 8 ++++++++ arch/x86/xen/xen-ops.h | 4 ++++ 7 files changed, 105 insertions(+), 5 deletions(-) create mode 100644 arch/x86/xen/suspend.c (limited to 'arch') diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 40b119b6b103..2ba2d1649131 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o suspend.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index ce67dc8f36af..b94f63ac228b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -857,7 +857,7 @@ static __init void xen_pagetable_setup_start(pgd_t *base) PFN_DOWN(__pa(xen_start_info->pt_base))); } -static __init void setup_shared_info(void) +void xen_setup_shared_info(void) { if (!xen_feature(XENFEAT_auto_translated_physmap)) { unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP); @@ -894,7 +894,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pv_mmu_ops.release_pmd = xen_release_pmd; pv_mmu_ops.set_pte = xen_set_pte; - setup_shared_info(); + xen_setup_shared_info(); /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ @@ -902,7 +902,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) } /* This is called once we have the cpu_possible_map */ -void __init xen_setup_vcpu_info_placement(void) +void xen_setup_vcpu_info_placement(void) { int cpu; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 4740cda36563..e95955968ba3 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -560,6 +560,29 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On save, we need to pin all pagetables to make sure they get their + * mfns turned into pfns. Search the list for any unpinned pgds and pin + * them (unpinned pgds are not currently in use, probably because the + * process is under construction or destruction). + */ +void xen_mm_pin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (!PagePinned(page)) { + xen_pgd_pin((pgd_t *)page_address(page)); + SetPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + /* The init_mm pagetable is really pinned as soon as its created, but that's before we have page structures to store the bits. So do all the book-keeping now. */ @@ -617,6 +640,29 @@ static void xen_pgd_unpin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On resume, undo any pinning done at save, so that the rest of the + * kernel doesn't see any unexpected pinned pagetables. + */ +void xen_mm_unpin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (PageSavePinned(page)) { + BUG_ON(!PagePinned(page)); + printk("unpinning pinned %p\n", page_address(page)); + xen_pgd_unpin((pgd_t *)page_address(page)); + ClearPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) { spin_lock(&next->page_table_lock); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 74ab8968c525..d2e3c20127d7 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -35,7 +35,7 @@ #include "xen-ops.h" #include "mmu.h" -static cpumask_t xen_cpu_initialized_map; +cpumask_t xen_cpu_initialized_map; static DEFINE_PER_CPU(int, resched_irq) = -1; static DEFINE_PER_CPU(int, callfunc_irq) = -1; static DEFINE_PER_CPU(int, debug_irq) = -1; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c new file mode 100644 index 000000000000..7620a16fe535 --- /dev/null +++ b/arch/x86/xen/suspend.c @@ -0,0 +1,42 @@ +#include + +#include +#include +#include + +#include +#include + +#include "xen-ops.h" +#include "mmu.h" + +void xen_pre_suspend(void) +{ + xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + mfn_to_pfn(xen_start_info->console.domU.mfn); + + BUG_ON(!irqs_disabled()); + + HYPERVISOR_shared_info = &xen_dummy_shared_info; + if (HYPERVISOR_update_va_mapping(fix_to_virt(FIX_PARAVIRT_BOOTMAP), + __pte_ma(0), 0)) + BUG(); +} + +void xen_post_suspend(int suspend_cancelled) +{ + if (suspend_cancelled) { + xen_start_info->store_mfn = + pfn_to_mfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + pfn_to_mfn(xen_start_info->console.domU.mfn); + } else { +#ifdef CONFIG_SMP + xen_cpu_initialized_map = cpu_online_map; +#endif + } + + xen_setup_shared_info(); +} + diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5aa241..0bef256e5f2d 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,6 +572,14 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_time_suspend(void) +{ +} + +void xen_time_resume(void) +{ +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a1bc89a8f169..a0503acad664 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -9,6 +9,7 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; +struct trap_info; void xen_copy_trap_info(struct trap_info *traps); DECLARE_PER_CPU(unsigned long, xen_cr3); @@ -19,6 +20,7 @@ extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; void xen_setup_mfn_list_list(void); +void xen_setup_shared_info(void); char * __init xen_memory_setup(void); void __init xen_arch_setup(void); @@ -59,6 +61,8 @@ int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info, int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, int wait); +extern cpumask_t xen_cpu_initialized_map; + /* Declare an asm function, along with symbols needed to make it inlineable */ -- cgit v1.2.1 From 359cdd3f866b6219a6729e313faf2221397f3278 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:28 +0100 Subject: xen: maintain clock offset over save/restore Hook into the device model to make sure that timekeeping's resume handler is called. This deals with our clocksource's non-monotonicity over the save/restore. Explicitly call clock_has_changed() to make sure that all the timers get retriggered properly. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/time.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 0bef256e5f2d..c39e1a5aa241 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,14 +572,6 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } -void xen_time_suspend(void) -{ -} - -void xen_time_resume(void) -{ -} - __init void xen_time_init(void) { int cpu = smp_processor_id(); -- cgit v1.2.1 From 3945e2c9abf8e00c2edc4aa29215ddfad1cd8cf7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 25 May 2008 10:00:09 -0700 Subject: x86: extend e820 ealy_res support 32bit - fix #2 remove extra -1 in reseve_early calling panic if can not find space for new RAMDISK Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup_32.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index c04e8c91daf7..08b47a2f7af0 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -479,7 +479,7 @@ static void __init reserve_initrd(void) initrd_start = 0; if (ramdisk_size >= end_of_lowmem/2) { - free_early(ramdisk_image, ramdisk_image + ramdisk_size - 1); + free_early(ramdisk_image, ramdisk_end); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -501,9 +501,13 @@ static void __init reserve_initrd(void) end_of_lowmem, ramdisk_size, PAGE_SIZE); + if (ramdisk_here == -1ULL) + panic("Cannot find place for new RAMDISK of size %lld\n", + ramdisk_size); + /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - reserve_early(ramdisk_here, ramdisk_here + ramdisk_size - 1, + reserve_early(ramdisk_here, ramdisk_here + ramdisk_size, "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; @@ -579,15 +583,15 @@ void __init setup_bootmem_allocator(void) PAGE_SIZE); if (bootmap == -1L) panic("Cannot find bootmem map of size %ld\n", bootmap_size); - reserve_early(bootmap, bootmap + bootmap_size - 1, "BOOTMAP"); + reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP"); #ifdef CONFIG_BLK_DEV_INITRD reserve_initrd(); #endif bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, max_low_pfn); printk(KERN_INFO " low ram: %08lx - %08lx\n", min_low_pfn< Date: Tue, 27 May 2008 18:03:56 +0200 Subject: x86: aperture_64.c: cleanups Some small cleanups for aperture_64.c; they should not really change any code. Signed-off-by: Pavel Machek Cc: Dave Jones Cc: Andi Kleen Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 5373f7834d8a..6eea42eb287b 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -111,7 +111,7 @@ static u32 __init allocate_aperture(void) /* Find a PCI capability */ -static __u32 __init find_cap(int bus, int slot, int func, int cap) +static u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; @@ -137,7 +137,7 @@ static __u32 __init find_cap(int bus, int slot, int func, int cap) } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) +static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; @@ -202,7 +202,7 @@ static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +static u32 __init search_agp_bridge(u32 *order, int *valid_agp) { int bus, slot, func; -- cgit v1.2.1 From b20aeccd6ad42ccb6be1b3d1d32618ddd2b31bf0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 28 May 2008 14:24:38 +0200 Subject: xen: fix early bootup crash on native hardware -tip tree auto-testing found the following early bootup hang: --------------> get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [Nvidia] BUG: Int 14: CR2 ffd00040 EDI 8092fbfe ESI ffd00040 EBP 80b0aee8 ESP 80b0aed0 EBX 000f76f0 EDX 0000000e ECX 00000003 EAX ffd00040 err 00000000 EIP 802c055a CS 00000060 flg 00010006 Stack: ffd00040 80bc78d0 80b0af6c 80b1dbfe 8093d8ba 00000008 80b42810 80b4ddb4 80b42842 00000000 80b0af1c 801079c8 808e724e 00000000 80b42871 802c0531 00000100 00000000 0003fff0 80b0af40 80129999 00040100 00040100 00000000 Pid: 0, comm: swapper Not tainted 2.6.26-rc4-sched-devel.git #570 [<802c055a>] ? strncmp+0x11/0x25 [<80b1dbfe>] ? get_memcfg_from_srat+0xb4/0x568 [<801079c8>] ? mcount_call+0x5/0x9 [<802c0531>] ? strcmp+0xa/0x22 [<80129999>] ? printk+0x38/0x3a [<80129999>] ? printk+0x38/0x3a [<8011b122>] ? memory_present+0x66/0x6f [<80b216b4>] ? setup_memory+0x13/0x40c [<80b16b47>] ? propagate_e820_map+0x80/0x97 [<80b1622a>] ? setup_arch+0x248/0x477 [<80129999>] ? printk+0x38/0x3a [<80b11759>] ? start_kernel+0x6e/0x2eb [<80b110fc>] ? i386_start_kernel+0xeb/0xf2 ======================= <------ with this config: http://redhat.com/~mingo/misc/config-Wed_May_28_01_33_33_CEST_2008.bad The thing is, the crash makes little sense at first sight. We crash on a benign-looking printk. The code around it got changed in -tip but checking those topic branches individually did not reproduce the bug. Bisection led to this commit: | d5edbc1f75420935b1ec7e65df10c8f81cea82de is first bad commit | commit d5edbc1f75420935b1ec7e65df10c8f81cea82de | Author: Jeremy Fitzhardinge | Date: Mon May 26 23:31:22 2008 +0100 | | xen: add p2m mfn_list_list Which is somewhat surprising, as on native hardware Xen client side should have little to no side-effects. After some head scratching, it turns out the following happened: randconfig enabled the following Xen options: CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=8 # CONFIG_XEN_BLKDEV_FRONTEND is not set # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_HVC_XEN=y # CONFIG_XEN_BALLOON is not set which activated this piece of code in arch/x86/xen/mmu.c: > @@ -69,6 +69,13 @@ > __attribute__((section(".data.page_aligned"))) = > { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; > > +/* Arrays of p2m arrays expressed in mfns used for save/restore */ > +static unsigned long p2m_top_mfn[TOP_ENTRIES] > + __attribute__((section(".bss.page_aligned"))); > + > +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] > + __attribute__((section(".bss.page_aligned"))); The problem is, you must only put variables into .bss.page_aligned that have a _size_ that is _exactly_ page aligned. In this case the size of p2m_top_mfn_list is not page aligned: 80b8d000 b p2m_top_mfn 80b8f000 b p2m_top_mfn_list 80b8f008 b softirq_stack 80b97008 b hardirq_stack 80b9f008 b bm_pte So all subsequent variables get unaligned which, depending on luck, breaks the kernel in various funny ways. In this case what killed the kernel first was the misaligned bootmap pte page, resulting in that creative crash above. Anyway, this was a fun bug to track down :-) I think the moral is that .bss.page_aligned is a dangerous construct in its current form, and the symptoms of breakage are very non-trivial, so i think we need build-time checks to make sure all symbols in .bss.page_aligned are truly page aligned. The Xen fix below gets the kernel booting again. Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index e95955968ba3..eef3b5c6e2fe 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -73,7 +73,8 @@ static unsigned long *p2m_top[TOP_ENTRIES] static unsigned long p2m_top_mfn[TOP_ENTRIES] __attribute__((section(".bss.page_aligned"))); -static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] +static unsigned long p2m_top_mfn_list[ + PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)] __attribute__((section(".bss.page_aligned"))); static inline unsigned p2m_top_index(unsigned long pfn) -- cgit v1.2.1 From c7d624d1ee7b77622305bd638755394e4d3f2d2f Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 28 May 2008 12:57:13 -0400 Subject: x86: Fix up silly i1586 boot message. Trying to boot a 64-bit kernel on a 32bit Pentium 4 gets you an amusing message along the lines of. "you need an x86-64, but you only have an i1586" due to the P4 being family F. Munge it to be 686. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/boot/cpu.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c index 00e19edd852c..92d6fd73dc7d 100644 --- a/arch/x86/boot/cpu.c +++ b/arch/x86/boot/cpu.c @@ -28,6 +28,8 @@ static char *cpu_name(int level) if (level == 64) { return "x86-64"; } else { + if (level == 15) + level = 6; sprintf(buf, "i%d86", level); return buf; } -- cgit v1.2.1 From 19ec673ced067316b9732bc6d1c4ff4052e5f795 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 28 May 2008 23:00:47 +0400 Subject: x86: nmi - fix incorrect NMI watchdog used by default The commit commit 4b82b277707a39b97271439c475f186f63ec4692 Author: Cyrill Gorcunov Date: Sat May 24 19:36:35 2008 +0400 set nmi_watchdog to NMI_IO_APIC as by default. This causes hangs on some machines with buggy watchdogs. Fix it - i.e. restore old behaviour. Thanks to Sitsofe Wheeler and Adrian Bunk for catching the problem and Maciej W. Rozycki for explanation what is going on there. Signed-off-by: Cyrill Gorcunov CC: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 69a839fc1eb0..3671a9f3564b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -84,20 +84,15 @@ static inline unsigned int get_timer_irqs(int cpu) #endif } +#ifdef CONFIG_X86_64 /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; -#ifdef CONFIG_X86_64 nmi_watchdog = NMI_NONE; -#else - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; -#endif } +#endif #ifdef CONFIG_SMP /* @@ -488,8 +483,15 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, return -EIO; } +#ifdef CONFIG_X86_64 /* if nmi_watchdog is not set yet, then set it */ nmi_watchdog_default(); +#else + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +#endif if (nmi_watchdog == NMI_LOCAL_APIC) { if (nmi_watchdog_enabled) -- cgit v1.2.1 From 8ff7f2a46bd8831e1f1f2a694ec13921720180b7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 21 Feb 2008 16:30:10 +0100 Subject: There is no need to have BOOT_PARAMS_SIZE known outside of atags.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit atags.c was the only user of KEXEC_BOOT_PARAMS_SIZE and kexec.h was only included to get that definition. Signed-off-by: Uwe Kleine-König Acked-by: Uli Luckas --- arch/arm/kernel/atags.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c index 64c420805e6f..56fef9a05504 100644 --- a/arch/arm/kernel/atags.c +++ b/arch/arm/kernel/atags.c @@ -1,5 +1,4 @@ #include -#include #include #include #include @@ -42,14 +41,14 @@ create_proc_entries(void) return 0; } - -static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE]; +#define BOOT_PARAMS_SIZE 1536 +static char __initdata atags_copy_buf[BOOT_PARAMS_SIZE]; static char __initdata *atags_copy; void __init save_atags(const struct tag *tags) { atags_copy = atags_copy_buf; - memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE); + memcpy(atags_copy, tags, sizeof(atags_copy_buf)); } -- cgit v1.2.1 From f7b0b939d54b457ba172e088f477af2012aef9b3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 21 Feb 2008 15:04:40 +0100 Subject: clean up atags exporting code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This gets rid of two static variables (one of them being __initdata) and a static function. Signed-off-by: Uwe Kleine-König Acked-by: Uli Luckas --- arch/arm/kernel/atags.c | 80 ++++++++++++++++++++++++------------------------- 1 file changed, 39 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c index 56fef9a05504..42a1a1415fa6 100644 --- a/arch/arm/kernel/atags.c +++ b/arch/arm/kernel/atags.c @@ -6,9 +6,8 @@ struct buffer { size_t size; - char *data; + char data[]; }; -static struct buffer tags_buffer; static int read_buffer(char* page, char** start, off_t off, int count, @@ -28,58 +27,57 @@ read_buffer(char* page, char** start, off_t off, int count, return count; } - -static int -create_proc_entries(void) -{ - struct proc_dir_entry* tags_entry; - - tags_entry = create_proc_read_entry("atags", 0400, NULL, read_buffer, &tags_buffer); - if (!tags_entry) - return -ENOMEM; - - return 0; -} - #define BOOT_PARAMS_SIZE 1536 -static char __initdata atags_copy_buf[BOOT_PARAMS_SIZE]; -static char __initdata *atags_copy; +static char __initdata atags_copy[BOOT_PARAMS_SIZE]; void __init save_atags(const struct tag *tags) { - atags_copy = atags_copy_buf; - memcpy(atags_copy, tags, sizeof(atags_copy_buf)); + memcpy(atags_copy, tags, sizeof(atags_copy)); } - static int __init init_atags_procfs(void) { - struct tag *tag; - int error; + /* + * This cannot go into save_atags() because kmalloc and proc don't work + * yet when it is called. + */ + struct proc_dir_entry *tags_entry; + struct tag *tag = (struct tag *)atags_copy; + struct buffer *b; + size_t size; - if (!atags_copy) { - printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n"); - return -EIO; + if (tag->hdr.tag != ATAG_CORE) { + printk(KERN_INFO "No ATAGs?"); + return -EINVAL; } - for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag)) + for (; tag->hdr.size; tag = tag_next(tag)) ; - tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr); - tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL); - if (tags_buffer.data == NULL) - return -ENOMEM; - memcpy(tags_buffer.data, atags_copy, tags_buffer.size); - - error = create_proc_entries(); - if (error) { - printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); - kfree(tags_buffer.data); - tags_buffer.size = 0; - tags_buffer.data = NULL; - } + /* include the terminating ATAG_NONE */ + size = (char *)tag - atags_copy + sizeof(struct tag_header); - return error; -} + WARN_ON(tag->hdr.tag != ATAG_NONE); + + b = kmalloc(sizeof(*b) + size, GFP_KERNEL); + if (!b) + goto nomem; + b->size = size; + memcpy(b->data, atags_copy, size); + + tags_entry = create_proc_read_entry("atags", 0400, + NULL, read_buffer, b); + + if (!tags_entry) + goto nomem; + + return 0; + +nomem: + kfree(b); + printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); + + return -ENOMEM; +} arch_initcall(init_atags_procfs); -- cgit v1.2.1 From d364319b989967b74e57fef5c8017fd56a16c392 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:42:01 +0200 Subject: x86: move mmconfig declarations to header arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and the inline stubs to the appropriate header file. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/mmconf-fam10h_64.c | 1 + arch/x86/kernel/setup_64.c | 13 +------------ 2 files changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c0..fdfdc550b366 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../pci/pci.h" diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..341230db74e1 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #ifdef CONFIG_PARAVIRT @@ -293,18 +294,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * -- cgit v1.2.1 From 4d285878564bb46cf64e54be18eeffe33ca583a0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:48:32 -0400 Subject: x86: Move the AMD64 specific parts out of setup_64.c Create a separate amd_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/amd_64.c | 235 +++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 232 ++---------------------------------------- 3 files changed, 242 insertions(+), 226 deletions(-) create mode 100644 arch/x86/kernel/cpu/amd_64.c (limited to 'arch') diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index a0c6f8190887..ef065c1a2e1a 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -7,6 +7,7 @@ obj-y += proc.o feature_names.o obj-$(CONFIG_X86_32) += common.o bugs.o obj-$(CONFIG_X86_32) += amd.o +obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o obj-$(CONFIG_X86_32) += transmeta.o diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c new file mode 100644 index 000000000000..1746f6f95726 --- /dev/null +++ b/arch/x86/kernel/cpu/amd_64.c @@ -0,0 +1,235 @@ +#include +#include + +#include +#include +#include + +#include + +extern int __cpuinit get_model_name(struct cpuinfo_x86 *c); +extern void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c); + +int force_mwait __cpuinitdata; + +#ifdef CONFIG_NUMA +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits; +#ifdef CONFIG_NUMA + int cpu = smp_processor_id(); + int node = 0; + unsigned apicid = hard_smp_processor_id(); +#endif + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; + +#ifdef CONFIG_NUMA + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; + +#endif +} + +#define ENABLE_C1E_MASK 0x18000000 +#define CPUID_PROCESSOR_SIGNATURE 1 +#define CPUID_XFAM 0x0ff00000 +#define CPUID_XFAM_K8 0x00000000 +#define CPUID_XFAM_10H 0x00100000 +#define CPUID_XFAM_11H 0x00200000 +#define CPUID_XMOD 0x000f0000 +#define CPUID_XMOD_REV_F 0x00040000 + +/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ +static __cpuinit int amd_apic_timer_broken(void) +{ + u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + + switch (eax & CPUID_XFAM) { + case CPUID_XFAM_K8: + if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) + break; + case CPUID_XFAM_10H: + case CPUID_XFAM_11H: + rdmsr(MSR_K8_ENABLE_C1E, lo, hi); + if (lo & ENABLE_C1E_MASK) + return 1; + break; + default: + /* err on the side of caution */ + return 1; + } + return 0; +} + +void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + unsigned level; + +#ifdef CONFIG_SMP + unsigned long value; + + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K8_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K8_HWCR, value); + } +#endif + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_cpu_cap(c, 0*32+31); + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || + level >= 0x0f58)) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); + + level = get_model_name(c); + if (!level) { + switch (c->x86) { + case 15: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } + display_cacheinfo(c); + + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) + amd_detect_cmp(c); + + if (c->extended_cpuid_level >= 0x80000006 && + (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_K8); + + /* MFENCE stops RDTSC speculation */ + set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + fam10h_check_enable_mmcfg(); + + if (amd_apic_timer_broken()) + disable_apic_timer = 1; + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && + (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + set_memory_4k((unsigned long)__va(tseg), 1); + } +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 341230db74e1..b07b1997ed97 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -96,8 +96,6 @@ int bootloader_type; unsigned long saved_video_mode; -int force_mwait __cpuinitdata; - /* * Early DMI memory */ @@ -526,7 +524,7 @@ void __init setup_arch(char **cmdline_p) check_enable_amd_mmconf_dmi(); } -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) +int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -542,7 +540,7 @@ static int __cpuinit get_model_name(struct cpuinfo_x86 *c) } -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -574,228 +572,6 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - fam10h_check_enable_mmcfg(); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) - set_memory_4k((unsigned long)__va(tseg), 1); - } -} - void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP @@ -977,6 +753,10 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) c->x86_vendor = X86_VENDOR_UNKNOWN; } +// FIXME: Needs to use cpu_vendor_dev_register +extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); +extern void __cpuinit init_amd(struct cpuinfo_x86 *c); + /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu below. */ -- cgit v1.2.1 From a82fbe31cb387bb246e2d3b3c177f551bb991135 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:54:32 -0400 Subject: x86: Move the 64-bit Intel specific parts out of setup_64.c Create a separate intel_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/intel_64.c | 97 ++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 93 +--------------------------------------- 3 files changed, 100 insertions(+), 91 deletions(-) create mode 100644 arch/x86/kernel/cpu/intel_64.c (limited to 'arch') diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index ef065c1a2e1a..b7a11924fed7 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o +obj-$(CONFIG_X86_64) += intel_64.o obj-$(CONFIG_X86_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c new file mode 100644 index 000000000000..e5f929f6c3d4 --- /dev/null +++ b/arch/x86/kernel/cpu/intel_64.c @@ -0,0 +1,97 @@ +#include +#include +#include +#include +#include +#include + +void __cpuinit early_init_intel(struct cpuinfo_x86 *c) +{ + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, t; + + if (c->cpuid_level < 4) + return 1; + + cpuid_count(4, 0, &eax, &t, &t, &t); + + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void __cpuinit srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + init_intel_cacheinfo(c); + if (c->cpuid_level > 9) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + } + + if (cpu_has_ds) { + unsigned int l1, l2; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + } + + + if (cpu_has_bts) + ds_init_intel(c); + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + /* CPUID workaround for Intel 0F34 CPU */ + if (c->x86_vendor == X86_VENDOR_INTEL && + c->x86 == 0xF && c->x86_model == 0x3 && + c->x86_mask == 0x4) + c->x86_phys_bits = 36; + } + + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + c->x86_max_cores = intel_num_cpu_cores(c); + + srat_detect_node(); +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index b07b1997ed97..c4e6a0b6c303 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -622,97 +622,6 @@ out: #endif } -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); - } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } - - - if (cpu_has_bts) - ds_init_intel(c); - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) { if (c->x86 == 0x6 && c->x86_model >= 0xf) @@ -756,6 +665,8 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) // FIXME: Needs to use cpu_vendor_dev_register extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); extern void __cpuinit init_amd(struct cpuinfo_x86 *c); +extern void __cpuinit early_init_intel(struct cpuinfo_x86 *c); +extern void __cpuinit init_intel(struct cpuinfo_x86 *c); /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu -- cgit v1.2.1 From 7e2191127eb414d7d5a11df6552ab6e3845d17a1 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:55:06 -0400 Subject: x86: Remove workaround for prescott (32bit P4) from 64-bit code. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/intel_64.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c index e5f929f6c3d4..b33912199484 100644 --- a/arch/x86/kernel/cpu/intel_64.c +++ b/arch/x86/kernel/cpu/intel_64.c @@ -79,11 +79,6 @@ void __cpuinit init_intel(struct cpuinfo_x86 *c) unsigned eax = cpuid_eax(0x80000008); c->x86_virt_bits = (eax >> 8) & 0xff; c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; } if (c->x86 == 15) -- cgit v1.2.1 From 30a713180b3d08fdec5ca572e5a1cd35253c5d8e Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:57:25 -0400 Subject: x86: Move the 64-bit Centaur specific parts out of setup_64.c Create a separate centaur_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/centaur_64.c | 31 +++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 28 ++-------------------------- 3 files changed, 34 insertions(+), 26 deletions(-) create mode 100644 arch/x86/kernel/cpu/centaur_64.c (limited to 'arch') diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index b7a11924fed7..c77a1c50d944 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_X86_32) += amd.o obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o +obj-$(CONFIG_X86_64) += centaur_64.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o obj-$(CONFIG_X86_64) += intel_64.o diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c new file mode 100644 index 000000000000..bac96d187d05 --- /dev/null +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -0,0 +1,31 @@ +#include +#include + +#include +#include + +void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x6 && c->x86_model >= 0xf) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 0x6 && c->x86_model >= 0xf) { + c->x86_cache_alignment = c->x86_clflush_size * 2; + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index c4e6a0b6c303..25afdd80a3cf 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -622,32 +622,6 @@ out: #endif } -static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x6 && c->x86_model >= 0xf) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_centaur(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - if (c->x86 == 0x6 && c->x86_model >= 0xf) { - c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - } - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); -} - static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; @@ -667,6 +641,8 @@ extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); extern void __cpuinit init_amd(struct cpuinfo_x86 *c); extern void __cpuinit early_init_intel(struct cpuinfo_x86 *c); extern void __cpuinit init_intel(struct cpuinfo_x86 *c); +extern void __cpuinit early_init_centaur(struct cpuinfo_x86 *c); +extern void __cpuinit init_centaur(struct cpuinfo_x86 *c); /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu -- cgit v1.2.1 From 1c47cd638e8302bc38be1f6d81067950e038ebd3 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 30 May 2008 15:42:45 -0700 Subject: x86: fix overlong line in arch/x86/kernel/cpu/amd_64.c Clean up an overlong line in arch/x86/kernel/cpu/amd_64.c. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/amd_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index 1746f6f95726..c815c2c0484b 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -229,7 +229,8 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) * benefit in doing so. */ if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + (tseg >> PMD_SHIFT) < + (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) set_memory_4k((unsigned long)__va(tseg), 1); } } -- cgit v1.2.1 From 23968f71b26ece45ed52895d41b0208b90a516e7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Thu, 29 May 2008 18:31:14 -0400 Subject: x86: Use structs instead of hardcoded offsets in x86 boot decompressor. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace hardcoded offsets embedded in macros in arch/x86/boot/compressed with proper structure references. Signed-off-by: Kristian Høgsberg Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/misc.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 90456cee47c3..74ed3c075ee6 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -30,6 +30,7 @@ #include #include #include +#include /* WARNING!! * This code is compiled with -fPIC and it is relocated dynamically @@ -187,13 +188,7 @@ static void gzip_release(void **); /* * This is set up by the setup-routine at boot-time */ -static unsigned char *real_mode; /* Pointer to real-mode data */ - -#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2)) -#ifndef STANDARD_MEMORY_BIOS_CALL -#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0)) -#endif -#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0)) +static struct boot_params *real_mode; /* Pointer to real-mode data */ extern unsigned char input_data[]; extern int input_len; @@ -276,12 +271,13 @@ static void putstr(const char *s) char c; #ifdef CONFIG_X86_32 - if (RM_SCREEN_INFO.orig_video_mode == 0 && lines == 0 && cols == 0) + if (real_mode->screen_info.orig_video_mode == 0 && + lines == 0 && cols == 0) return; #endif - x = RM_SCREEN_INFO.orig_x; - y = RM_SCREEN_INFO.orig_y; + x = real_mode->screen_info.orig_x; + y = real_mode->screen_info.orig_y; while ((c = *s++) != '\0') { if (c == '\n') { @@ -302,8 +298,8 @@ static void putstr(const char *s) } } - RM_SCREEN_INFO.orig_x = x; - RM_SCREEN_INFO.orig_y = y; + real_mode->screen_info.orig_x = x; + real_mode->screen_info.orig_y = y; pos = (x + cols * y) * 2; /* Update cursor position */ outb(14, vidport); @@ -430,7 +426,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, { real_mode = rmode; - if (RM_SCREEN_INFO.orig_video_mode == 7) { + if (real_mode->screen_info.orig_video_mode == 7) { vidmem = (char *) 0xb0000; vidport = 0x3b4; } else { @@ -438,8 +434,8 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, vidport = 0x3d4; } - lines = RM_SCREEN_INFO.orig_video_lines; - cols = RM_SCREEN_INFO.orig_video_cols; + lines = real_mode->screen_info.orig_video_lines; + cols = real_mode->screen_info.orig_video_cols; window = output; /* Output buffer (Normally at 1M) */ free_mem_ptr = heap; /* Heap */ -- cgit v1.2.1 From 3b6b9293d0f8e1b11630102013ca2a1dcef17d44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Thu, 29 May 2008 18:31:15 -0400 Subject: x86: Honor 'quiet' command line option in real mode boot decompressor. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch lets the early real mode code look for the 'quiet' option on the kernel command line and pass a loadflag to the decompressor. When this flag is set, we suppress the "Decompressing Linux... Parsing ELF... done." messages. Signed-off-by: Kristian Høgsberg Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/misc.c | 13 ++++++++++--- arch/x86/boot/main.c | 4 ++++ 2 files changed, 14 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 74ed3c075ee6..d10e7274e1fc 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -189,6 +189,7 @@ static void gzip_release(void **); * This is set up by the setup-routine at boot-time */ static struct boot_params *real_mode; /* Pointer to real-mode data */ +static int quiet; extern unsigned char input_data[]; extern int input_len; @@ -391,7 +392,8 @@ static void parse_elf(void *output) return; } - putstr("Parsing ELF... "); + if (!quiet) + putstr("Parsing ELF... "); phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum); if (!phdrs) @@ -426,6 +428,9 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, { real_mode = rmode; + if (real_mode->hdr.loadflags & QUIET_FLAG) + quiet = 1; + if (real_mode->screen_info.orig_video_mode == 7) { vidmem = (char *) 0xb0000; vidport = 0x3b4; @@ -461,9 +466,11 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, #endif makecrc(); - putstr("\nDecompressing Linux... "); + if (!quiet) + putstr("\nDecompressing Linux... "); gunzip(); parse_elf(output); - putstr("done.\nBooting the kernel.\n"); + if (!quiet) + putstr("done.\nBooting the kernel.\n"); return; } diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c index 77569a4a3be1..2296164b54d2 100644 --- a/arch/x86/boot/main.c +++ b/arch/x86/boot/main.c @@ -165,6 +165,10 @@ void main(void) /* Set the video mode */ set_video(); + /* Parse command line for 'quiet' and pass it to decompressor. */ + if (cmdline_find_option_bool("quiet")) + boot_params.hdr.loadflags |= QUIET_FLAG; + /* Do the last things and invoke protected mode */ go_to_protected_mode(); } -- cgit v1.2.1 From f0d43100f13be0fa5bf52741d7084bb27f00e621 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:56:36 -0700 Subject: x86: extend e820 early_res support 32bit -fix #3 introduce init_pg_table_start, so xen PV could specify the value. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/head32.c | 3 ++- arch/x86/kernel/head_32.S | 2 ++ arch/x86/kernel/setup_32.c | 7 +++++++ arch/x86/lguest/boot.c | 5 +++-- arch/x86/xen/enlighten.c | 3 ++- 5 files changed, 16 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index c216d3c2a991..0b6cb9fba71e 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -76,7 +76,8 @@ void __init i386_start_kernel(void) reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif - reserve_early(__pa_symbol(&_end), init_pg_tables_end, "INIT_PG_TABLE"); + reserve_early(init_pg_tables_start, init_pg_tables_end, + "INIT_PG_TABLE"); reserve_ebda_region(); diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b2cc73768a9d..bef4618feadb 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -194,6 +194,7 @@ default_entry: xorl %ebx,%ebx /* %ebx is kept at zero */ movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_pmd), %edx movl $PTE_ATTR, %eax 10: @@ -228,6 +229,7 @@ default_entry: page_pde_offset = (__PAGE_OFFSET >> 20); movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_dir), %edx movl $PTE_ATTR, %eax 10: diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 08b47a2f7af0..de9c5ee77d07 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -71,6 +71,7 @@ /* This value is set up by the early boot code to point to the value immediately after the boot time page tables. It contains a *physical* address, and must not be in the .bss segment! */ +unsigned long init_pg_tables_start __initdata = ~0UL; unsigned long init_pg_tables_end __initdata = ~0UL; /* @@ -485,6 +486,10 @@ static void __init reserve_initrd(void) return; } + printk(KERN_INFO "old RAMDISK: %08llx - %08llx\n", ramdisk_image, + ramdisk_end); + + if (ramdisk_end <= end_of_lowmem) { /* All in lowmem, easy case */ /* @@ -511,6 +516,8 @@ static void __init reserve_initrd(void) "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; + printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n", + ramdisk_here, ramdisk_here + ramdisk_size); do_relocate_initrd = true; } diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index af65b2da3ba0..bf7c34a3aaeb 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1011,6 +1011,7 @@ __init void lguest_init(void) * clobbered. The Launcher places our initial pagetables somewhere at * the top of our physical memory, so we don't need extra space: set * init_pg_tables_end to the end of the kernel. */ + init_pg_tables_start = __pa(pg0); init_pg_tables_end = __pa(pg0); /* Load the %fs segment register (the per-cpu segment register) with @@ -1064,9 +1065,9 @@ __init void lguest_init(void) pm_power_off = lguest_power_off; machine_ops.restart = lguest_restart; - /* Now we're set up, call start_kernel() in init/main.c and we proceed + /* Now we're set up, call i386_start_kernel() in head32.c and we proceed * to boot as normal. It never returns. */ - start_kernel(); + i386_start_kernel(); } /* * This marks the end of stage II of our journey, The Guest. diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e457d61..ccc7b84ddabf 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1211,6 +1211,7 @@ asmlinkage void __init xen_start_kernel(void) pgd = (pgd_t *)xen_start_info->pt_base; + init_pg_tables_start = __pa(pgd); init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE; init_mm.pgd = pgd; /* use the Xen pagetables to start */ @@ -1246,5 +1247,5 @@ asmlinkage void __init xen_start_kernel(void) add_preferred_console("hvc", 0, NULL); /* Start the world */ - start_kernel(); + i386_start_kernel(); } -- cgit v1.2.1 From 163872950dc856fd23849c27f60049feaac49ae6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:57:22 -0700 Subject: x86: extend e820 early_res support 32bit -fix #4 reserve_early pgdata for 32bit numa Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf983687..47749727907e 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -159,8 +159,13 @@ static void __init allocate_pgdat(int nid) if (nid && node_has_online_mem(nid)) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { - NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); - min_low_pfn += PFN_UP(sizeof(pg_data_t)); + unsigned long pgdat_phys; + pgdat_phys = find_e820_area(min_low_pfn<>PAGE_SHIFT)); + reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), + "NODE_DATA"); } } -- cgit v1.2.1 From a5481280b29b6a3db912ec100498bd31eaa6d2db Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:58:37 -0700 Subject: x86: extend e820 early_res support 32bit -fix #5 reserve early numa kva, so it will not clash with new RAMDISK Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 1 - arch/x86/mm/discontig_32.c | 12 +++++------- 2 files changed, 5 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index de9c5ee77d07..6f40cb560ea9 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -614,7 +614,6 @@ void __init setup_bootmem_allocator(void) */ find_smp_config(); #endif - numa_kva_reserve(); reserve_crashkernel(); reserve_ibft_region(); diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 47749727907e..55fdbab6b014 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -357,6 +357,11 @@ unsigned long __init setup_memory(void) printk("kva_start_pfn ~ %ld find_max_low_pfn() ~ %ld\n", kva_start_pfn, max_low_pfn); printk("max_pfn = %ld\n", max_pfn); + + /* avoid clash with initrd */ + reserve_early(kva_start_pfn< system_max_low_pfn) @@ -392,13 +397,6 @@ unsigned long __init setup_memory(void) return max_low_pfn; } -void __init numa_kva_reserve(void) -{ - if (kva_pages) - reserve_bootmem(PFN_PHYS(kva_start_pfn), PFN_PHYS(kva_pages), - BOOTMEM_DEFAULT); -} - void __init zone_sizes_init(void) { int nid; -- cgit v1.2.1 From 9a73aa81ffb993382afed2ed404bc2b330d75427 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 16:25:56 -0700 Subject: x86: 32bit numa srat fix early_ioremap leak on two node system (16g RAM) with numa config I got this crash: get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [ACPIAM] ACPI: Too big length in RSDT: 92 failed to get NUMA memory information from SRAT table NUMA - single node, flat memory mode Node: 0, start_pfn: 0, end_pfn: 153 Setting physnode_map array to node 0 for pfns: 0 ... Pid: 0, comm: swapper Not tainted 2.6.26-rc4 #4 [<80b41289>] hlt_loop+0x0/0x3 [<8011efa0>] ? alloc_remap+0x50/0x70 [<8079e32e>] alloc_node_mem_map+0x5e/0xa0 [<8012e77b>] ? printk+0x1b/0x20 [<80b590f6>] free_area_init_node+0xc6/0x470 [<80b588fc>] ? __alloc_bootmem_node+0x2c/0x50 [<80b58ad8>] ? find_min_pfn_for_node+0x38/0x70 [<8012e77b>] ? printk+0x1b/0x20 [<80b597c4>] free_area_init_nodes+0x254/0x2d0 [<80b544d7>] zone_sizes_init+0x97/0xa0 [<80b48a03>] setup_arch+0x383/0x530 [<8012e77b>] ? printk+0x1b/0x20 [<80b41aa4>] start_kernel+0x64/0x350 [<80b412d8>] i386_start_kernel+0x8/0x10 ======================= this patch increases the acpi table limit to 32. Also match early_ioremap() with early_iounmap(). Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/srat_32.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c index 70e4a374b4e8..88971ee166d4 100644 --- a/arch/x86/kernel/srat_32.c +++ b/arch/x86/kernel/srat_32.c @@ -261,7 +261,7 @@ out_fail: struct acpi_static_rsdt { struct acpi_table_rsdt table; - u32 padding[7]; /* Allow for 7 more table entries */ + u32 padding[32]; /* Allow for 32 more table entries */ }; int __init get_memcfg_from_srat(void) @@ -297,7 +297,7 @@ int __init get_memcfg_from_srat(void) } rsdt = (struct acpi_table_rsdt *) - early_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt)); + early_ioremap(rsdp->rsdt_physical_address, sizeof(saved_rsdt)); if (!rsdt) { printk(KERN_WARNING @@ -310,6 +310,7 @@ int __init get_memcfg_from_srat(void) if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) { printk(KERN_WARNING "ACPI: RSDT signature incorrect\n"); + early_iounmap(rsdt, sizeof(saved_rsdt)); goto out_err; } @@ -319,37 +320,51 @@ int __init get_memcfg_from_srat(void) * size of RSDT) divided by the size of each entry * (4-byte table pointers). */ - tables = (header->length - sizeof(struct acpi_table_header)) / 4; + tables = (header->length - sizeof(struct acpi_table_header)) / sizeof(u32); if (!tables) goto out_err; memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt)); - + early_iounmap(rsdt, sizeof(saved_rsdt)); if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) { printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n", saved_rsdt.table.header.length); goto out_err; } - printk("Begin SRAT table scan....\n"); + printk("Begin SRAT table scan....%d\n", tables); - for (i = 0; i < tables; i++) { + for (i = 0; i < tables; i++){ + int result; + u32 length; /* Map in header, then map in full table length. */ header = (struct acpi_table_header *) early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header)); if (!header) break; + + printk(KERN_INFO "ACPI: %4.4s %08lX, %04X\n", + header->signature, + (unsigned long)saved_rsdt.table.table_offset_entry[i], + header->length); + + if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) { + early_iounmap(header, sizeof(struct acpi_table_header)); + continue; + } + + length = header->length; + early_iounmap(header, sizeof(struct acpi_table_header)); header = (struct acpi_table_header *) - early_ioremap(saved_rsdt.table.table_offset_entry[i], header->length); + early_ioremap(saved_rsdt.table.table_offset_entry[i], length); if (!header) break; - if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) - continue; - /* we've found the srat table. don't need to look at any more tables */ - return acpi20_parse_srat((struct acpi_table_srat *)header); + result = acpi20_parse_srat((struct acpi_table_srat *)header); + early_iounmap(header, length); + return result; } out_err: remove_all_active_ranges(); -- cgit v1.2.1 From 014c257cce65e9d1cd2d28ec1c89a37c536b151d Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sat, 31 May 2008 14:23:50 +0530 Subject: ftrace: core support for ARM Core ftrace support for the ARM architecture, which includes support for dynamic function tracing. Signed-off-by: Abhishek Sagar Signed-off-by: Ingo Molnar --- arch/arm/Kconfig | 2 + arch/arm/boot/compressed/Makefile | 6 ++ arch/arm/kernel/Makefile | 5 ++ arch/arm/kernel/armksyms.c | 5 ++ arch/arm/kernel/entry-common.S | 47 ++++++++++++++ arch/arm/kernel/ftrace.c | 128 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 193 insertions(+) create mode 100644 arch/arm/kernel/ftrace.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68914d4..3845e5c8a34f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -14,6 +14,8 @@ config ARM select HAVE_OPROFILE select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) + select HAVE_FTRACE if (!XIP_KERNEL) + select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE) help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index de9d9ee50958..95baac4939e0 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -69,6 +69,12 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \ head.o misc.o $(OBJS) + +ifeq ($(CONFIG_FTRACE),y) +ORIG_CFLAGS := $(KBUILD_CFLAGS) +KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) +endif + EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index ad455ff5aebe..eb9092ca8008 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -4,6 +4,10 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) +ifdef CONFIG_DYNAMIC_FTRACE +CFLAGS_REMOVE_ftrace.o = -pg +endif + # Object file lists. obj-y := compat.o entry-armv.o entry-common.o irq.o \ @@ -18,6 +22,7 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 688b7b1ee416..3b132215cbf8 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -48,6 +48,11 @@ extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); extern void fp_enter(void); +#ifdef CONFIG_FTRACE +extern void mcount(void); +EXPORT_SYMBOL(mcount); +#endif + /* * This has a special calling convention; it doesn't * modify any of the usual registers, except for LR. diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 597ed00a08d8..8f79a4789ed4 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -99,6 +99,53 @@ ENTRY(ret_from_fork) #undef CALL #define CALL(x) .long x +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(mcount) + stmdb sp!, {r0-r3, lr} + mov r0, lr + + .globl mcount_call +mcount_call: + bl ftrace_stub + ldmia sp!, {r0-r3, pc} + +ENTRY(ftrace_caller) + stmdb sp!, {r0-r3, lr} + ldr r1, [fp, #-4] + mov r0, lr + + .globl ftrace_call +ftrace_call: + bl ftrace_stub + ldmia sp!, {r0-r3, pc} + +#else + +ENTRY(mcount) + stmdb sp!, {r0-r3, lr} + ldr r0, =ftrace_trace_function + ldr r2, [r0] + adr r0, ftrace_stub + cmp r0, r2 + bne trace + ldmia sp!, {r0-r3, pc} + +trace: + ldr r1, [fp, #-4] + mov r0, lr + mov lr, pc + mov pc, r2 + ldmia sp!, {r0-r3, pc} + +#endif /* CONFIG_DYNAMIC_FTRACE */ + + .globl ftrace_stub +ftrace_stub: + mov pc, lr + +#endif /* CONFIG_FTRACE */ + /*============================================================================= * SWI handler *----------------------------------------------------------------------------- diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c new file mode 100644 index 000000000000..f4cb4cc3fa0c --- /dev/null +++ b/arch/arm/kernel/ftrace.c @@ -0,0 +1,128 @@ +/* + * Dynamic function tracing support. + * + * Copyright (C) 2008 Abhishek Sagar + * + * For licencing details, see COPYING. + * + * Defines low-level handling of mcount calls when the kernel + * is compiled with the -pg flag. When using dynamic ftrace, the + * mcount call-sites get patched lazily with NOP till they are + * enabled. All code mutation routines here take effect atomically. + */ + +#include +#include + +#define INSN_SIZE 4 +#define PC_OFFSET 8 +#define BL_OPCODE 0xeb000000 +#define BL_OFFSET_MASK 0x00ffffff + +static unsigned long bl_insn; +static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */ + +/* return true if mcount call site is already patched/no-op'ed */ +int ftrace_ip_converted(unsigned long pc) +{ + unsigned long save; + + pc -= INSN_SIZE; + save = *(unsigned long *)pc; + return save == NOP; +} + +unsigned char *ftrace_nop_replace(void) +{ + return (char *)&NOP; +} + +/* construct a branch (BL) instruction to addr */ +unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + long offset; + + offset = (long)addr - (long)(pc - INSN_SIZE + PC_OFFSET); + if (unlikely(offset < -33554432 || offset > 33554428)) { + /* Can't generate branches that far (from ARM ARM). Ftrace + * doesn't generate branches outside of core kernel text. + */ + WARN_ON_ONCE(1); + return NULL; + } + offset = (offset >> 2) & BL_OFFSET_MASK; + bl_insn = BL_OPCODE | offset; + return (unsigned char *)&bl_insn; +} + +int ftrace_modify_code(unsigned long pc, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned long err = 0, replaced = 0, old, new; + + old = *(unsigned long *)old_code; + new = *(unsigned long *)new_code; + pc -= INSN_SIZE; + + __asm__ __volatile__ ( + "1: ldr %1, [%2] \n" + " cmp %1, %4 \n" + "2: streq %3, [%2] \n" + " cmpne %1, %3 \n" + " movne %0, #2 \n" + "3:\n" + + ".section .fixup, \"ax\"\n" + "4: mov %0, #1 \n" + " b 3b \n" + ".previous\n" + + ".section __ex_table, \"a\"\n" + " .long 1b, 4b \n" + " .long 2b, 4b \n" + ".previous\n" + + : "=r"(err), "=r"(replaced) + : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) + : "memory"); + + if (!err && (replaced == old)) + flush_icache_range(pc, pc + INSN_SIZE); + + return err; +} + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + int ret; + unsigned long pc, old; + unsigned char *new; + + pc = (unsigned long)&ftrace_call; + pc += INSN_SIZE; + memcpy(&old, &ftrace_call, INSN_SIZE); + new = ftrace_call_replace(pc, (unsigned long)func); + ret = ftrace_modify_code(pc, (unsigned char *)&old, new); + return ret; +} + +int ftrace_mcount_set(unsigned long *data) +{ + unsigned long pc, old; + unsigned long *addr = data; + unsigned char *new; + + pc = (unsigned long)&mcount_call; + pc += INSN_SIZE; + memcpy(&old, &mcount_call, INSN_SIZE); + new = ftrace_call_replace(pc, *addr); + *addr = ftrace_modify_code(pc, (unsigned char *)&old, new); + return 0; +} + +/* run from kstop_machine */ +int __init ftrace_dyn_arch_init(void *data) +{ + ftrace_mcount_set(data); + return 0; +} -- cgit v1.2.1 From 831d991821daedd4839073dbca55514432ef1768 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 3 Sep 2007 10:17:39 +0200 Subject: x86: add PCI extended config space access for AMD Barcelona This patch implements PCI extended configuration space access for AMD's Barcelona CPUs. It extends the method using CF8/CFC IO addresses. An x86 capability bit has been introduced that is set for CPUs supporting PCI extended config space accesses. Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 4 ++++ arch/x86/kernel/cpu/amd_64.c | 3 +++ arch/x86/kernel/setup.c | 13 +++++++++++++ arch/x86/kernel/setup.h | 26 ++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 2 ++ arch/x86/pci/direct.c | 21 +++++++++++++++------ 6 files changed, 63 insertions(+), 6 deletions(-) create mode 100644 arch/x86/kernel/setup.h (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 245866828294..99221f9834e4 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -6,6 +6,7 @@ #include #include +#include "../setup.h" #include "cpu.h" /* @@ -308,6 +309,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) if (cpu_has_xmm2) set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + amd_enable_pci_ext_cfg(c); } static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index c815c2c0484b..180097e99219 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -217,6 +217,9 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) if (c->x86 == 0x10) fam10h_check_enable_mmcfg(); + if (c->x86 == 0x10) + amd_enable_pci_ext_cfg(c); + if (amd_apic_timer_broken()) disable_apic_timer = 1; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 6f80b852a196..d8f171234013 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -136,4 +136,17 @@ void __init setup_per_cpu_areas(void) setup_cpumask_of_cpu(); } +#define ENABLE_CF8_EXT_CFG (1ULL << 46) + +void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c) +{ + u64 reg; + rdmsrl(MSR_AMD64_NB_CFG, reg); + if (!(reg & ENABLE_CF8_EXT_CFG)) { + reg |= ENABLE_CF8_EXT_CFG; + wrmsrl(MSR_AMD64_NB_CFG, reg); + } + set_cpu_cap(c, X86_FEATURE_PCI_EXT_CFG); +} + #endif diff --git a/arch/x86/kernel/setup.h b/arch/x86/kernel/setup.h new file mode 100644 index 000000000000..66cc2c7f961d --- /dev/null +++ b/arch/x86/kernel/setup.h @@ -0,0 +1,26 @@ +/* + * Internal declarations for shared x86 setup code. + * + * Copyright (c) 2008 Advanced Micro Devices, Inc. + * Contributed by Robert Richter + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef _ARCH_X86_KERNEL_SETUP_H + +extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); + +#endif /* _ARCH_X86_KERNEL_SETUP_H */ diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 25afdd80a3cf..215bd67e5b6c 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -73,6 +73,8 @@ #include #include +#include "setup.h" + #include #ifdef CONFIG_PARAVIRT #include diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 21d1e0e0d535..27d61b63def6 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -8,18 +8,21 @@ #include "pci.h" /* - * Functions for accessing PCI configuration space with type 1 accesses + * Functions for accessing PCI base (first 256 bytes) and extended + * (4096 bytes per PCI function) configuration space with type 1 + * accesses. */ #define PCI_CONF1_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + (0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \ + | (devfn << 8) | (reg & 0xFC)) static int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) { + if ((bus > 255) || (devfn > 255) || (reg > 4095)) { *value = -1; return -EINVAL; } @@ -50,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) + if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; spin_lock_irqsave(&pci_config_lock, flags); @@ -260,10 +263,16 @@ void __init pci_direct_init(int type) return; printk(KERN_INFO "PCI: Using configuration type %d for base access\n", type); - if (type == 1) + if (type == 1) { raw_pci_ops = &pci_direct_conf1; - else + if (!raw_pci_ext_ops && cpu_has_pci_ext_cfg) { + printk(KERN_INFO "PCI: Using configuration type 1 " + "for extended access\n"); + raw_pci_ext_ops = &pci_direct_conf1; + } + } else { raw_pci_ops = &pci_direct_conf2; + } } int __init pci_direct_probe(void) -- cgit v1.2.1 From c46e62f73569d7ef42255bd6f31e35925b7f1492 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 28 May 2008 12:42:57 +0200 Subject: i8259: fix final ugliness Introduce IRQx_VECTOR on 32-bit, so that #ifdef noise is kept down. There should be no object code change. [ mingo@elte.hu: merged to x86/irq not x86/i8259 due to x86/irq having restructured the vector code into asm-x86/irq_vectors.h, which this patch touches. ] Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 7a0fda8f01b5..dc92b49d9204 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -297,34 +297,28 @@ void init_8259A(int auto_eoi) * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ -#ifndef CONFIG_X86_64 - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ -#else /* CONFIG_X86_64 */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64, + to 0x20-0x27 on i386 */ outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); -#endif /* CONFIG_X86_64 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); + if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ -#ifndef CONFIG_X86_64 - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ -#else /* CONFIG_X86_64 */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + + /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */ outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); -#endif /* CONFIG_X86_64 */ if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt -- cgit v1.2.1 From 1a5726528a70bb239bdd149aef7f2155cd2b1699 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 12:21:36 +0200 Subject: fix build bug in "x86: add PCI extended config space access for AMD Barcelona" --- arch/x86/kernel/cpu/amd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 99221f9834e4..656b40aed647 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include "../setup.h" -- cgit v1.2.1 From 88ff0a474e98f869d8c321e29481f298320100d6 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Tue, 27 May 2008 18:49:39 -0700 Subject: x86: coding style fixes for nmi.c before total: 1 errors, 6 warnings, 534 lines checked after total: 0 errors, 1 warnings, 532 lines checked Signed-off-by: Hiroshi Shimamoto Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 3671a9f3564b..bf143f191fb1 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -23,9 +23,8 @@ #include #include #include +#include -#include -#include #include #include @@ -45,13 +44,16 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE; * 0: the lapic NMI watchdog is disabled, but can be enabled */ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; +EXPORT_SYMBOL(nmi_active); unsigned int nmi_watchdog = NMI_DEFAULT; +EXPORT_SYMBOL(nmi_watchdog); + +static int panic_on_timeout; static unsigned int nmi_hz = HZ; static DEFINE_PER_CPU(short, wd_enabled); -static int endflag __initdata = 0; +static int endflag __initdata; static inline unsigned int get_nmi_count(int cpu) { @@ -404,7 +406,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) static DEFINE_SPINLOCK(lock); /* Serialise the printks */ spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); + printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); dump_stack(); spin_unlock(&lock); cpu_clear(cpu, backtrace_mask); @@ -529,7 +531,3 @@ void __trigger_all_cpu_backtrace(void) mdelay(1); } } - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); - -- cgit v1.2.1 From 9f5314fb4d556d3132c784d0df47352b2830ca53 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 28 May 2008 09:51:18 -0500 Subject: x86, uv: update macros used by UV platform Update the UV address macros to better describe the fields of UV physical addresses. Improve comments in the header files. Add additional MMR definitions. Signed-off-by: Jack Steiner Signed-off-by: Ingo Molnar --- arch/x86/kernel/genx2apic_uv_x.c | 141 +++++++++++++++++++++++++++------------ 1 file changed, 98 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index ebf13908a743..45e84acca8a9 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -5,7 +5,7 @@ * * SGI UV APIC functions (note: not an Intel compatible APIC) * - * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. */ #include @@ -55,37 +55,37 @@ static cpumask_t uv_vector_allocation_domain(int cpu) int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip) { unsigned long val; - int nasid; + int pnode; - nasid = uv_apicid_to_nasid(phys_apicid); + pnode = uv_apicid_to_pnode(phys_apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_INIT; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); mdelay(10); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_STARTUP; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); return 0; } static void uv_send_IPI_one(int cpu, int vector) { unsigned long val, apicid, lapicid; - int nasid; + int pnode; apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */ lapicid = apicid & 0x3f; /* ZZZ macro needed */ - nasid = uv_apicid_to_nasid(apicid); + pnode = uv_apicid_to_pnode(apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid << UVH_IPI_INT_APIC_ID_SHFT) | (vector << UVH_IPI_INT_VECTOR_SHFT); - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } static void uv_send_IPI_mask(cpumask_t mask, int vector) @@ -159,39 +159,81 @@ struct genapic apic_x2apic_uv_x = { .phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */ }; -static __cpuinit void set_x2apic_extra_bits(int nasid) +static __cpuinit void set_x2apic_extra_bits(int pnode) { - __get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6); + __get_cpu_var(x2apic_extra_bits) = (pnode << 6); } /* * Called on boot cpu. */ +static __init int boot_pnode_to_blade(int pnode) +{ + int blade; + + for (blade = 0; blade < uv_num_possible_blades(); blade++) + if (pnode == uv_blade_info[blade].pnode) + return blade; + BUG(); +} + +struct redir_addr { + unsigned long redirect; + unsigned long alias; +}; + +#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT + +static __initdata struct redir_addr redir_addrs[] = { + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG}, +}; + +static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) +{ + union uvh_si_alias0_overlay_config_u alias; + union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect; + int i; + + for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) { + alias.v = uv_read_local_mmr(redir_addrs[i].alias); + if (alias.s.base == 0) { + *size = (1UL << alias.s.m_alias); + redirect.v = uv_read_local_mmr(redir_addrs[i].redirect); + *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT; + return; + } + } + BUG(); +} + static __init void uv_system_init(void) { union uvh_si_addr_map_config_u m_n_config; - int bytes, nid, cpu, lcpu, nasid, last_nasid, blade; - unsigned long mmr_base; + union uvh_node_id_u node_id; + unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; + int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; + unsigned long mmr_base, present; m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG); + m_val = m_n_config.s.m_skt; + n_val = m_n_config.s.n_skt; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); - last_nasid = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) - uv_possible_blades++; - last_nasid = nasid; - } + for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) + uv_possible_blades += + hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8)); printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades()); bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = alloc_bootmem_pages(bytes); + get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); + bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes(); uv_node_to_blade = alloc_bootmem_pages(bytes); memset(uv_node_to_blade, 255, bytes); @@ -200,43 +242,56 @@ static __init void uv_system_init(void) uv_cpu_to_blade = alloc_bootmem_pages(bytes); memset(uv_cpu_to_blade, 255, bytes); - last_nasid = -1; - blade = -1; - lcpu = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) { - blade++; - lcpu = -1; - uv_blade_info[blade].nr_posible_cpus = 0; + blade = 0; + for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) { + present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8); + for (j = 0; j < 64; j++) { + if (!test_bit(j, &present)) + continue; + uv_blade_info[blade].pnode = (i * 64 + j); + uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + blade++; } - last_nasid = nasid; - lcpu++; + } - uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt; - uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt; + node_id.v = uv_read_local_mmr(UVH_NODE_ID); + gnode_upper = (((unsigned long)node_id.s.node_id) & + ~((1 << n_val) - 1)) << m_val; + + for_each_present_cpu(cpu) { + nid = cpu_to_node(cpu); + pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu)); + blade = boot_pnode_to_blade(pnode); + lcpu = uv_blade_info[blade].nr_possible_cpus; + uv_blade_info[blade].nr_possible_cpus++; + + uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; + uv_cpu_hub_info(cpu)->lowmem_remap_top = + lowmem_redir_base + lowmem_redir_size; + uv_cpu_hub_info(cpu)->m_val = m_val; + uv_cpu_hub_info(cpu)->n_val = m_val; uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; - uv_cpu_hub_info(cpu)->local_nasid = nasid; - uv_cpu_hub_info(cpu)->gnode_upper = - nasid & ~((1 << uv_hub_info->n_val) - 1); + uv_cpu_hub_info(cpu)->pnode = pnode; + uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1; + uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; + uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */ - uv_blade_info[blade].nasid = nasid; - uv_blade_info[blade].nr_posible_cpus++; uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; - printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n", - cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid); - printk(KERN_DEBUG "UV lcpu %d, blade %d\n", lcpu, blade); + printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, pnode %d, nid %d, " + "lcpu %d, blade %d\n", + cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid, + lcpu, blade); } } /* * Called on each cpu to initialize the per_cpu UV data area. + * ZZZ hotplug not supported yet */ void __cpuinit uv_cpu_init(void) { @@ -246,5 +301,5 @@ void __cpuinit uv_cpu_init(void) uv_blade_info[uv_numa_blade_id()].nr_online_cpus++; if (get_uv_system_type() == UV_NON_UNIQUE_APIC) - set_x2apic_extra_bits(uv_hub_info->local_nasid); + set_x2apic_extra_bits(uv_hub_info->pnode); } -- cgit v1.2.1 From 15ce60056b24a65b65e28de973a9fd8ac0750a2f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 13:20:11 +0200 Subject: xen: export get_phys_to_machine -tip testing found the following xen-console symbols trouble: ERROR: "get_phys_to_machine" [drivers/video/xen-fbfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/net/xen-netfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/input/xen-kbdfront.ko] undefined! with: http://redhat.com/~mingo/misc/config-Mon_Jun__2_12_25_13_CEST_2008.bad --- arch/x86/xen/mmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index eef3b5c6e2fe..17f374eb1faa 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -136,6 +136,7 @@ unsigned long get_phys_to_machine(unsigned long pfn) idx = p2m_index(pfn); return p2m_top[topidx][idx]; } +EXPORT_SYMBOL_GPL(get_phys_to_machine); static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) { -- cgit v1.2.1 From e2426cf85f8db5891fb5831323d2d0c176c4dadc Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:24:27 +0100 Subject: xen: avoid hypercalls when updating unpinned pud/pmd When operating on an unpinned pagetable (ie, one under construction or destruction), it isn't necessary to use a hypercall to update a pud/pmd entry. Jan Beulich observed that a similar optimisation avoided many thousands of hypercalls while doing a kernel build. One tricky part is that early in the kernel boot there's no page structure, so we can't check to see if the page is pinned. In that case, we just always use the hypercall. Signed-off-by: Jeremy Fitzhardinge Cc: Jan Beulich Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 14 +++++++++++--- arch/x86/xen/mmu.c | 39 +++++++++++++++++++++++++++++++++++---- arch/x86/xen/mmu.h | 8 ++++---- 3 files changed, 50 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index b94f63ac228b..ed9f04b3836d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -901,6 +901,14 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } +static __init void xen_post_allocator_init(void) +{ + pv_mmu_ops.set_pmd = xen_set_pmd; + pv_mmu_ops.set_pud = xen_set_pud; + + xen_mark_init_mm_pinned(); +} + /* This is called once we have the cpu_possible_map */ void xen_setup_vcpu_info_placement(void) { @@ -988,7 +996,7 @@ static const struct pv_init_ops xen_init_ops __initdata = { .banner = xen_banner, .memory_setup = xen_memory_setup, .arch_setup = xen_arch_setup, - .post_allocator_init = xen_mark_init_mm_pinned, + .post_allocator_init = xen_post_allocator_init, }; static const struct pv_time_ops xen_time_ops __initdata = { @@ -1100,7 +1108,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte = NULL, /* see xen_pagetable_setup_* */ .set_pte_at = xen_set_pte_at, - .set_pmd = xen_set_pmd, + .set_pmd = xen_set_pmd_hyper, .pte_val = xen_pte_val, .pte_flags = native_pte_val, @@ -1111,7 +1119,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, - .set_pud = xen_set_pud, + .set_pud = xen_set_pud_hyper, .pte_clear = xen_pte_clear, .pmd_clear = xen_pmd_clear, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 17f374eb1faa..4fa0934db925 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -223,7 +223,14 @@ void make_lowmem_page_readwrite(void *vaddr) } -void xen_set_pmd(pmd_t *ptr, pmd_t val) +static bool page_pinned(void *ptr) +{ + struct page *page = virt_to_page(ptr); + + return PagePinned(page); +} + +void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) { struct multicall_space mcs; struct mmu_update *u; @@ -241,6 +248,18 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val) preempt_enable(); } +void xen_set_pmd(pmd_t *ptr, pmd_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pmd_hyper(ptr, val); +} + /* * Associate a virtual page frame with a given physical page frame * and protection flags for that frame. @@ -348,7 +367,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) return ret; } -void xen_set_pud(pud_t *ptr, pud_t val) +void xen_set_pud_hyper(pud_t *ptr, pud_t val) { struct multicall_space mcs; struct mmu_update *u; @@ -366,6 +385,18 @@ void xen_set_pud(pud_t *ptr, pud_t val) preempt_enable(); } +void xen_set_pud(pud_t *ptr, pud_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pud_hyper(ptr, val); +} + void xen_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; @@ -387,7 +418,7 @@ void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) void xen_pmd_clear(pmd_t *pmdp) { - xen_set_pmd(pmdp, __pmd(0)); + set_pmd(pmdp, __pmd(0)); } pmd_t xen_make_pmd(pmdval_t pmd) @@ -758,7 +789,7 @@ void xen_exit_mmap(struct mm_struct *mm) spin_lock(&mm->page_table_lock); /* pgd may not be pinned in the error exit path of execve */ - if (PagePinned(virt_to_page(mm->pgd))) + if (page_pinned(mm->pgd)) xen_pgd_unpin(mm->pgd); spin_unlock(&mm->page_table_lock); diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 5fe961caffd4..e3dd09e25c63 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -25,10 +25,6 @@ enum pt_level { void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -void xen_set_pte(pte_t *ptep, pte_t pteval); -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); -void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next); void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm); @@ -45,10 +41,14 @@ pte_t xen_make_pte(pteval_t); pmd_t xen_make_pmd(pmdval_t); pgd_t xen_make_pgd(pgdval_t); +void xen_set_pte(pte_t *ptep, pte_t pteval); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); void xen_set_pte_atomic(pte_t *ptep, pte_t pte); +void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_set_pud(pud_t *ptr, pud_t val); +void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval); +void xen_set_pud_hyper(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); -- cgit v1.2.1 From 9c7a794209f8a91f47697c3be20597eb60531e6d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:02 +0100 Subject: xen: restore vcpu_info mapping If we're using vcpu_info mapping, then make sure its restored on all processors before relasing them from stop_machine. The only complication is that if this fails, we can't continue because we've already made assumptions that the mapping is available (baked in calls to the _direct versions of the functions, for example). Fortunately this can only happen with a 32-bit hypervisor, which may possibly run out of mapping space. On a 64-bit hypervisor, this is a non-issue. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 30 +++++++++++++++++++++++++++++- arch/x86/xen/suspend.c | 4 +++- arch/x86/xen/xen-ops.h | 1 + 3 files changed, 33 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index ed9f04b3836d..8e6152e6ed88 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -98,7 +98,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; */ static int have_vcpu_info_placement = 1; -static void __init xen_vcpu_setup(int cpu) +static void xen_vcpu_setup(int cpu) { struct vcpu_register_vcpu_info info; int err; @@ -136,6 +136,34 @@ static void __init xen_vcpu_setup(int cpu) } } +/* + * On restore, set the vcpu placement up again. + * If it fails, then we're in a bad state, since + * we can't back out from using it... + */ +void xen_vcpu_restore(void) +{ + if (have_vcpu_info_placement) { + int cpu; + + for_each_online_cpu(cpu) { + bool other_cpu = (cpu != smp_processor_id()); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) + BUG(); + + xen_vcpu_setup(cpu); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) + BUG(); + } + + BUG_ON(!have_vcpu_info_placement); + } +} + static void __init xen_banner(void) { printk(KERN_INFO "Booting paravirtualized kernel on %s\n", diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 7620a16fe535..7ab10f6b39a5 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -26,6 +26,8 @@ void xen_pre_suspend(void) void xen_post_suspend(int suspend_cancelled) { + xen_setup_shared_info(); + if (suspend_cancelled) { xen_start_info->store_mfn = pfn_to_mfn(xen_start_info->store_mfn); @@ -35,8 +37,8 @@ void xen_post_suspend(int suspend_cancelled) #ifdef CONFIG_SMP xen_cpu_initialized_map = cpu_online_map; #endif + xen_vcpu_restore(); } - xen_setup_shared_info(); } diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a0503acad664..a457e03e1b21 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -26,6 +26,7 @@ char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void xen_vcpu_restore(void); void __init xen_build_dynamic_phys_to_machine(void); -- cgit v1.2.1 From d07af1f0e3a3e378074fc36322dd7b0e72d9a3e2 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:03 +0100 Subject: xen: resume timers on all vcpus On resume, the vcpu timer modes will not be restored. The timer infrastructure doesn't do this for us, since it assumes the cpus are offline. We can just poke the other vcpus into the right mode directly though. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/suspend.c | 1 + arch/x86/xen/time.c | 13 +++++++++++++ arch/x86/xen/xen-ops.h | 1 + 3 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 7ab10f6b39a5..251669a932d4 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -38,6 +38,7 @@ void xen_post_suspend(int suspend_cancelled) xen_cpu_initialized_map = cpu_online_map; #endif xen_vcpu_restore(); + xen_timer_resume(); } } diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5aa241..ea137fb660c0 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,6 +572,19 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_timer_resume(void) +{ + int cpu; + + if (xen_clockevent != &xen_vcpuop_clockevent) + return; + + for_each_online_cpu(cpu) { + if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL)) + BUG(); + } +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a457e03e1b21..9a055592a307 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -37,6 +37,7 @@ void __init xen_time_init(void); unsigned long xen_get_wallclock(void); int xen_set_wallclock(unsigned long time); unsigned long long xen_sched_clock(void); +void xen_timer_resume(void); irqreturn_t xen_debug_interrupt(int irq, void *dev_id); -- cgit v1.2.1 From 7e0edc1bc343231029084761ebf59e522902eb49 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:04 +0100 Subject: xen: add new Xen elfnote types and use them appropriately Define recently added XEN_ELFNOTEs, and use them appropriately. Most significantly, this enables domain checkpointing (xm save -c). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/xen-head.S | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 2ab5f42f34d8..ef6c9e005f90 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -7,6 +7,7 @@ #include #include #include +#include __INIT ENTRY(startup_xen) @@ -32,5 +33,9 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") + ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID, + .quad _PAGE_PRESENT; .quad _PAGE_PRESENT) + ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1) + ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW, .long __HYPERVISOR_VIRT_START) #endif /*CONFIG_XEN */ -- cgit v1.2.1 From e0773410247f1e5fc6f7c52a4c5f3c6c9873d527 Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sat, 31 May 2008 14:24:02 +0530 Subject: ftrace: export kretprobe_trampoline for function tracer Follow suit from kprobe implementations on other archs and make kretprobe_trampoline non-static. Ftrace implmentation (more specifically, kernel/trace/trace.c) requires access to it (see-> http://kerneltrap.org/mailarchive/linux-kernel/2008/5/27/1955234). Signed-off-by: Abhishek Sagar Signed-off-by: Ingo Molnar --- arch/arm/kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 5593dd207216..5ee39e10c8d1 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -274,7 +274,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, * for kretprobe handlers which should normally be interested in r0 only * anyway. */ -static void __attribute__((naked)) __kprobes kretprobe_trampoline(void) +void __naked __kprobes kretprobe_trampoline(void) { __asm__ __volatile__ ( "stmdb sp!, {r0 - r11} \n\t" -- cgit v1.2.1 From 3d1ba1da2b4ff4ace7801e99fb9a3095b182d847 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 13:50:10 +0200 Subject: x86: fix nmi.c build bug apic.h needs to be included for the apic_write_around() definition. --- arch/x86/kernel/nmi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index bf143f191fb1..cbd4fa3c475b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -11,6 +11,8 @@ * Mikael Pettersson : PM converted to driver model. Disable/enable API. */ +#include + #include #include #include -- cgit v1.2.1 From 720046de27ec2a96d4497dbca8ee98657efa059c Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Apr 2008 15:13:36 +0100 Subject: [ARM] pxa: don't register lpd270 cpld_irq sysdev if !lpd270 Don't register the LPD270 cpld_irq system device when we're not running on a LPD270 machine - "cpld_irq" is also registered (separately) by Lubbock and Mainstone. Signed-off-by: Russell King --- arch/arm/mach-pxa/lpd270.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index a20e4b1649d6..6fd7b8b753fc 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -134,9 +134,12 @@ static struct sys_device lpd270_irq_device = { static int __init lpd270_irq_device_init(void) { - int ret = sysdev_class_register(&lpd270_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lpd270_irq_device); + int ret = -ENODEV; + if (machine_is_logicpd_pxa270()) { + ret = sysdev_class_register(&lpd270_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lpd270_irq_device); + } return ret; } -- cgit v1.2.1 From ffdf786291636137ef2d51c3a5d340793032aa28 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 May 2008 14:57:59 +0100 Subject: [ARM] pxa: Add PXA3_ prefix to PXA3 specific constants standby.S contains both PXA2 and PXA3 specific code. The PXA3 specific constants clash with the PXA2 ones, so give them a prefix. Signed-off-by: Russell King --- arch/arm/mach-pxa/standby.S | 82 ++++++++++++++++++++++----------------------- 1 file changed, 41 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 167412e6bec8..a37ef1c4b9e9 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -35,20 +35,20 @@ ENTRY(pxa_cpu_standby) #ifdef CONFIG_PXA3xx -#define MDCNFG 0x0000 -#define MDCNFG_DMCEN (1 << 30) -#define DDR_HCAL 0x0060 -#define DDR_HCAL_HCRNG 0x1f -#define DDR_HCAL_HCPROG (1 << 28) -#define DDR_HCAL_HCEN (1 << 31) -#define DMCIER 0x0070 -#define DMCIER_EDLP (1 << 29) -#define DMCISR 0x0078 -#define RCOMP 0x0100 -#define RCOMP_SWEVAL (1 << 31) +#define PXA3_MDCNFG 0x0000 +#define PXA3_MDCNFG_DMCEN (1 << 30) +#define PXA3_DDR_HCAL 0x0060 +#define PXA3_DDR_HCAL_HCRNG 0x1f +#define PXA3_DDR_HCAL_HCPROG (1 << 28) +#define PXA3_DDR_HCAL_HCEN (1 << 31) +#define PXA3_DMCIER 0x0070 +#define PXA3_DMCIER_EDLP (1 << 29) +#define PXA3_DMCISR 0x0078 +#define PXA3_RCOMP 0x0100 +#define PXA3_RCOMP_SWEVAL (1 << 31) ENTRY(pm_enter_standby_start) - mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG) + mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG) add r1, r1, #0x00100000 /* @@ -59,54 +59,54 @@ ENTRY(pm_enter_standby_start) * This also means that only the dynamic memory controller * can be reliably accessed in the code following standby. */ - ldr r2, [r1] @ Dummy read MDCNFG + ldr r2, [r1] @ Dummy read PXA3_MDCNFG mcr p14, 0, r0, c7, c0, 0 .rept 8 nop .endr - ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN - bic r0, r0, #DDR_HCAL_HCEN - str r0, [r1, #DDR_HCAL] -1: ldr r0, [r1, #DDR_HCAL] - tst r0, #DDR_HCAL_HCEN + ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN + bic r0, r0, #PXA3_DDR_HCAL_HCEN + str r0, [r1, #PXA3_DDR_HCAL] +1: ldr r0, [r1, #PXA3_DDR_HCAL] + tst r0, #PXA3_DDR_HCAL_HCEN bne 1b - ldr r0, [r1, #RCOMP] @ Initiate RCOMP - orr r0, r0, #RCOMP_SWEVAL - str r0, [r1, #RCOMP] + ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP + orr r0, r0, #PXA3_RCOMP_SWEVAL + str r0, [r1, #PXA3_RCOMP] - mov r0, #~0 @ Clear interrupts - str r0, [r1, #DMCISR] + mov r0, #~0 @ Clear interrupts + str r0, [r1, #PXA3_DMCISR] - ldr r0, [r1, #DMCIER] @ set DMIER[EDLP] - orr r0, r0, #DMCIER_EDLP - str r0, [r1, #DMCIER] + ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP] + orr r0, r0, #PXA3_DMCIER_EDLP + str r0, [r1, #PXA3_DMCIER] - ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN - bic r0, r0, #DDR_HCAL_HCRNG - orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG - str r0, [r1, #DDR_HCAL] + ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN + bic r0, r0, #PXA3_DDR_HCAL_HCRNG + orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG + str r0, [r1, #PXA3_DDR_HCAL] -1: ldr r0, [r1, #DMCISR] - tst r0, #DMCIER_EDLP +1: ldr r0, [r1, #PXA3_DMCISR] + tst r0, #PXA3_DMCIER_EDLP beq 1b - ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN] - orr r0, r0, #MDCNFG_DMCEN - str r0, [r1, #MDCNFG] -1: ldr r0, [r1, #MDCNFG] - tst r0, #MDCNFG_DMCEN + ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN] + orr r0, r0, #PXA3_MDCNFG_DMCEN + str r0, [r1, #PXA3_MDCNFG] +1: ldr r0, [r1, #PXA3_MDCNFG] + tst r0, #PXA3_MDCNFG_DMCEN beq 1b - ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG] + ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG] orr r0, r0, #2 @ HCRNG - str r0, [r1, #DDR_HCAL] + str r0, [r1, #PXA3_DDR_HCAL] - ldr r0, [r1, #DMCIER] @ Clear the interrupt + ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt bic r0, r0, #0x20000000 - str r0, [r1, #DMCIER] + str r0, [r1, #PXA3_DMCIER] mov pc, lr ENTRY(pm_enter_standby_end) -- cgit v1.2.1 From e3ba22db09408baee721897fb1b50e16f071d916 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Sat, 24 May 2008 17:06:45 +0100 Subject: [ARM] 5056/1: [AT91] Cleanup YL9200 board file Cleanup the YL9200 board-support file. Other things fixed are: - Use new-style UART initialization - Register all LEDs as gpio_leds. - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE - The only I2C device is the AT24C eeprom. - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA. - Configure touchscreen interrupt pin. Also adding the board to the KConfig and Makefile. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/Kconfig | 6 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/board-yl-9200.c | 853 +++++++++++++++++-------------------- 3 files changed, 394 insertions(+), 466 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 0fc07b6db749..3d549a9afe1d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -126,6 +126,12 @@ config MACH_ECBAT91 Select this if you are using emQbit's ECB_AT91 board. +config MACH_YL9200 + bool "ucDragon YL-9200" + depends on ARCH_AT91RM9200 + help + Select this if you are using the ucDragon YL-9200 board. + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 8d9bc0153b18..995be14b2c42 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o +obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index b5717108991d..7079050ab88d 100755 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -1,11 +1,10 @@ /* * linux/arch/arm/mach-at91/board-yl-9200.c * - * Adapted from: - *various board files in - * /arch/arm/mach-at91 - * modifications to convert to YL-9200 platform - * Copyright (C) 2007 S.Birtles + * Adapted from various board files in arch/arm/mach-at91 + * + * Modifications for YL-9200 platform: + * Copyright (C) 2007 S. Birtles * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,13 +25,14 @@ #include #include #include +#include #include #include -/*#include */ #include #include +#include +#include -/*#include */ #include #include #include @@ -45,179 +45,108 @@ #include #include #include -#include -#include #include "generic.h" -#include -#define YL_9200_FLASH_BASE AT91_CHIPSELECT_0 -#define YL_9200_FLASH_SIZE 0x800000 -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL - *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL - *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL - *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL - *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL - * on the YL-9200 we are sitting at the following - *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL - *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL - */ +static void __init yl9200_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); -/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/ + /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ + at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); -static struct at91_uart_config __initdata yl_9200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 1, 0, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); -static void __init yl_9200_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - /*Also initialises register clocks & gpio*/ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/ + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); - /* Setup the serial ports and console */ - at91_init_serial(&yl_9200_uart_config); + /* USART0 on ttyS2. (Rx & Tx only to JP3) */ + at91_register_uart(AT91RM9200_ID_US0, 2, 0); - /* Setup the LEDs D2=PB17,D3=PB16 */ - at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/ + /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */ + at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } -static void __init yl_9200_init_irq(void) +static void __init yl9200_init_irq(void) { at91rm9200_init_interrupts(NULL); } -static struct at91_eth_data __initdata yl_9200_eth_data = { - .phy_irq_pin = AT91_PIN_PB28, - .is_rmii = 1, -}; -static struct at91_usbh_data __initdata yl_9200_usbh_data = { - .ports = 1, /* this should be 1 not 2 for the Yl9200*/ +/* + * LEDs + */ +static struct gpio_led yl9200_leds[] = { + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PB17, + .active_low = 1, + .default_trigger = "timer", + }, + { /* D3 */ + .name = "led3", + .gpio = AT91_PIN_PB16, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D4 */ + .name = "led4", + .gpio = AT91_PIN_PB15, + .active_low = 1, + }, + { /* D5 */ + .name = "led5", + .gpio = AT91_PIN_PB8, + .active_low = 1, + } }; -static struct at91_udc_data __initdata yl_9200_udc_data = { -/*on sheet 7 Schemitic rev 1.0*/ - .pullup_pin = AT91_PIN_PC4, - .vbus_pin= AT91_PIN_PC5, - .pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/ - -}; /* -static struct at91_cf_data __initdata yl_9200_cf_data = { -TODO S.BIRTLES - .det_pin = AT91_PIN_xxx, - .rst_pin = AT91_PIN_xxx, - .irq_pin = ... not connected - .vcc_pin = ... always powered - + * Ethernet + */ +static struct at91_eth_data __initdata yl9200_eth_data = { + .phy_irq_pin = AT91_PIN_PB28, + .is_rmii = 1, }; -*/ -static struct at91_mmc_data __initdata yl_9200_mmc_data = { - .det_pin = AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/ -/* .wp_pin = ... not connected SHEET7*/ - .slot_b = 0, - .wire4 = 1, +/* + * USB Host + */ +static struct at91_usbh_data __initdata yl9200_usbh_data = { + .ports = 1, /* PQFP version of AT91RM9200 */ }; -/* -------------------------------------------------------------------- - * Touch screen - * -------------------------------------------------------------------- */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */ -} - -static void __init at91_init_device_ts(void) -{ -/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C -THAT IS TO SAY THAT MISO,MOSI,SPCK AND CS are already configured -we only need to enable the other datapins which are: -PB10/RK1 BUSY -*/ -/* Touchscreen BUSY signal , pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/ -at91_set_gpio_input(AT91_PIN_PB10, 1); -} - -#else -static void __init at91_init_device_ts(void) {} -#endif - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, -/* for a 8" touch screen*/ - //.x_plate_ohms = 603, //= 450, S.Birtles TODO - //.y_plate_ohms = 332, //= 250, S.Birtles TODO -/*for a 10.4" touch screen*/ - //.x_plate_ohms =611, - //.y_plate_ohms =325, - - .x_plate_ohms = 576, - .y_plate_ohms = 366, - // - .pressure_max = 15000, /*generally nonsense on the 7843*/ - /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/ - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; +/* + * USB Device + */ +static struct at91_udc_data __initdata yl9200_udc_data = { + .pullup_pin = AT91_PIN_PC4, + .vbus_pin = AT91_PIN_PC5, + .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */ -/*static struct canbus_platform_data can_info = { - .model = 2510, }; -*/ - -static struct spi_board_info yl_9200_spi_devices[] = { -/*this sticks it at: - /sys/devices/platform/atmel_spi.0/spi0.0 - /sys/bus/platform/devices/ -Documentation/spi IIRC*/ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - /*(this IS correct 04-NOV-2007)*/ - { - .modalias = "ads7846", /* because the driver is called ads7846*/ - .chip_select = 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ -/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/ - /*.controller_data =AT91_PIN_PA3 ,*/ - .max_speed_hz = 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = AT91_PIN_PB11, - }, -#endif -/*we need to put our CAN driver data here!!*/ -/*THIS IS ALL DUMMY DATA*/ -/* { - .modalias = "mcp2510", //DUMMY for MCP2510 chip - .chip_select = 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ - /*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */ - /* .controller_data =AT91_PIN_PA4 , - .max_speed_hz = 25000 * 26, - .bus_num = 0, - .platform_data = &can_info, - .irq = AT91_PIN_PC0, - }, - */ - //max SPI chip needs to go here +/* + * MMC + */ +static struct at91_mmc_data __initdata yl9200_mmc_data = { + .det_pin = AT91_PIN_PB9, + // .wp_pin = ... not connected + .wire4 = 1, }; -static struct mtd_partition __initdata yl_9200_nand_partition[] = { +/* + * NAND Flash + */ +static struct mtd_partition __initdata yl9200_nand_partition[] = { { .name = "AT91 NAND partition 1, boot", .offset = 0, @@ -242,442 +171,434 @@ static struct mtd_partition __initdata yl_9200_nand_partition[] = { .name = "AT91 NAND partition 5, ext-fs", .offset = 32 * SZ_1M, .size = 32 * SZ_1M - }, + } }; static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) { - *num_partitions = ARRAY_SIZE(yl_9200_nand_partition); - return yl_9200_nand_partition; + *num_partitions = ARRAY_SIZE(yl9200_nand_partition); + return yl9200_nand_partition; } -static struct at91_nand_data __initdata yl_9200_nand_data = { - .ale= 6, - .cle= 7, - /*.det_pin = AT91_PIN_PCxx,*/ /*we don't have a det pin because NandFlash is fixed to board*/ - .rdy_pin = AT91_PIN_PC14, /*R/!B Sheet10*/ - .enable_pin = AT91_PIN_PC15, /*!CE Sheet10 */ +static struct at91_nand_data __initdata yl9200_nand_data = { + .ale = 6, + .cle = 7, + // .det_pin = ... not connected + .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ + .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ .partition_info = nand_partitions, }; - - /* -TODO S.Birtles -potentially a problem with the size above -physmap platform flash device: 00800000 at 10000000 -physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank -NOR chip too large to fit in mapping. Attempting to cope... - Intel/Sharp Extended Query Table at 0x0031 -Using buffer write method -cfi_cmdset_0001: Erase suspend on write enabled -Reducing visibility of 16384KiB chip to 8192KiB -*/ + * NOR Flash + */ +#define YL9200_FLASH_BASE AT91_CHIPSELECT_0 +#define YL9200_FLASH_SIZE 0x1000000 -static struct mtd_partition yl_9200_flash_partitions[] = { +static struct mtd_partition yl9200_flash_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { - .name = "Bootloader", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_WRITEABLE /* force read-only */ - },{ - .name = "Kernel", - .size = 0x001C0000, - .offset = 0x00040000, - },{ - .name = "Filesystem", - .size = MTDPART_SIZ_FULL, - .offset = 0x00200000 + .name = "Kernel", + .size = 0x001C0000, + .offset = 0x00040000, + }, + { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00200000 } - }; -static struct physmap_flash_data yl_9200_flash_data = { - .width = 2, - .parts = yl_9200_flash_partitions, - .nr_parts = ARRAY_SIZE(yl_9200_flash_partitions), +static struct physmap_flash_data yl9200_flash_data = { + .width = 2, + .parts = yl9200_flash_partitions, + .nr_parts = ARRAY_SIZE(yl9200_flash_partitions), }; -static struct resource yl_9200_flash_resources[] = { -{ - .start = YL_9200_FLASH_BASE, - .end = YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, +static struct resource yl9200_flash_resources[] = { + { + .start = YL9200_FLASH_BASE, + .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, } }; -static struct platform_device yl_9200_flash = { +static struct platform_device yl9200_flash = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = &yl_9200_flash_data, + .platform_data = &yl9200_flash_data, }, - .resource = yl_9200_flash_resources, - .num_resources = ARRAY_SIZE(yl_9200_flash_resources), + .resource = yl9200_flash_resources, + .num_resources = ARRAY_SIZE(yl9200_flash_resources), }; - -static struct gpio_led yl_9200_leds[] = { -/*D2 &D3 are passed directly in via at91_init_leds*/ - { - .name = "led4", /*D4*/ - .gpio = AT91_PIN_PB15, - .active_low = 1, - .default_trigger = "heartbeat", - /*.default_trigger = "timer",*/ - }, - { - .name = "led5", /*D5*/ - .gpio = AT91_PIN_PB8, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -//static struct gpio_sounder yl_9200_sounder[] = {*/ -/*This is a simple speaker attached to a gpo line*/ - -// { -// .name = "Speaker", /*LS1*/ -// .gpio = AT91_PIN_PA22, -// .active_low = 0, -// .default_trigger = "heartbeat", - /*.default_trigger = "timer",*/ -// }, -//}; - - - -static struct i2c_board_info __initdata yl_9200_i2c_devices[] = { - { - /*TODO*/ - I2C_BOARD_INFO("CS4334", 0x00), +/* + * I2C (TWI) + */ +static struct i2c_board_info __initdata yl9200_i2c_devices[] = { + { /* EEPROM */ + I2C_BOARD_INFO("24c128", 0x50), } }; - - /* +/* * GPIO Buttons - */ +*/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button yl_9200_buttons[] = { +static struct gpio_keys_button yl9200_buttons[] = { { .gpio = AT91_PIN_PA24, - .code = BTN_2, + .code = BTN_2, .desc = "SW2", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PB1, - .code = BTN_3, + .code = BTN_3, .desc = "SW3", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PB2, - .code = BTN_4, + .code = BTN_4, .desc = "SW4", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PB6, - .code = BTN_5, + .code = BTN_5, .desc = "SW5", .active_low = 1, .wakeup = 1, - }, - + } }; -static struct gpio_keys_platform_data yl_9200_button_data = { - .buttons = yl_9200_buttons, - .nbuttons = ARRAY_SIZE(yl_9200_buttons), +static struct gpio_keys_platform_data yl9200_button_data = { + .buttons = yl9200_buttons, + .nbuttons = ARRAY_SIZE(yl9200_buttons), }; -static struct platform_device yl_9200_button_device = { +static struct platform_device yl9200_button_device = { .name = "gpio-keys", .id = -1, .num_resources = 0, .dev = { - .platform_data = &yl_9200_button_data, + .platform_data = &yl9200_button_data, } }; -static void __init yl_9200_add_device_buttons(void) +static void __init yl9200_add_device_buttons(void) { - //SW2 - at91_set_gpio_input(AT91_PIN_PA24, 0); + at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */ at91_set_deglitch(AT91_PIN_PA24, 1); - - //SW3 - at91_set_gpio_input(AT91_PIN_PB1, 0); + at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */ at91_set_deglitch(AT91_PIN_PB1, 1); - //SW4 - at91_set_gpio_input(AT91_PIN_PB2, 0); + at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */ at91_set_deglitch(AT91_PIN_PB2, 1); - - //SW5 - at91_set_gpio_input(AT91_PIN_PB6, 0); + at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */ at91_set_deglitch(AT91_PIN_PB6, 1); + /* Enable buttons (Sheet 5) */ + at91_set_gpio_output(AT91_PIN_PB7, 1); + + platform_device_register(&yl9200_button_device); +} +#else +static void __init yl9200_add_device_buttons(void) {} +#endif + +/* + * Touchscreen + */ +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static int ads7843_pendown_state(void) +{ + return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */ +} + +static struct ads7846_platform_data ads_info = { + .model = 7843, + .x_min = 150, + .x_max = 3830, + .y_min = 190, + .y_max = 3830, + .vref_delay_usecs = 100, + + /* For a 8" touch-screen */ + // .x_plate_ohms = 603, + // .y_plate_ohms = 332, + + /* For a 10.4" touch-screen */ + // .x_plate_ohms = 611, + // .y_plate_ohms = 325, + + .x_plate_ohms = 576, + .y_plate_ohms = 366, + + .pressure_max = 15000, /* generally nonsense on the 7843 */ + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7843_pendown_state, +}; - at91_set_gpio_output(AT91_PIN_PB7, 1); /* #TURN BUTTONS ON, SHEET 5 of schematics */ - platform_device_register(&yl_9200_button_device); +static void __init yl9200_add_device_ts(void) +{ + at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */ + at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */ } #else -static void __init yl_9200_add_device_buttons(void) {} +static void __init yl9200_add_device_ts(void) {} +#endif + +/* + * SPI devices + */ +static struct spi_board_info yl9200_spi_devices[] = { +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { /* Touchscreen */ + .modalias = "ads7846", + .chip_select = 0, + .max_speed_hz = 5000 * 26, + .platform_data = &ads_info, + .irq = AT91_PIN_PB11, + }, #endif + { /* CAN */ + .modalias = "mcp2510", + .chip_select = 1, + .max_speed_hz = 25000 * 26, + .irq = AT91_PIN_PC0, + } +}; +/* + * LCD / VGA + * + * EPSON S1D13806 FB (discontinued chip) + * EPSON S1D13506 FB + */ #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include