From a44c1d700c848e221d80aab1029d36a60d21a0f4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 14 Nov 2018 19:13:02 +0000 Subject: ARM: riscpc: replace gettimeoffset() with clocksource Replace the old gettimeoffset() interface (which became buggy in several ways) with a clocksource that atomically reads the count and status from the timer, and corrects the count as appropriate ensuring proper resolution of time without time warping backwards. We keep the original periodic timer non-clock event implementation to provide the kernel with a regular source of interrupts, which are required to keep the clocksource properly updated. Signed-off-by: Russell King --- arch/arm/Kconfig | 1 - arch/arm/mach-rpc/time.c | 38 +++++++++++++++++++++++++------------- 2 files changed, 25 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9aed25a6019b..08a4915a69d2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -528,7 +528,6 @@ config ARCH_RPC select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE - select ARCH_USES_GETTIMEOFFSET select CPU_SA110 select FIQ select HAVE_IDE diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 2689771c1d38..1c84efc9db1f 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -13,7 +13,7 @@ * 04-Dec-1997 RMK Updated for new arch/arm/time.c * 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500 */ -#include +#include #include #include #include @@ -27,11 +27,15 @@ #define RPC_CLOCK_FREQ 2000000 #define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ) -static u32 ioc_timer_gettimeoffset(void) +static u32 ioc_time; + +static u64 ioc_timer_read(struct clocksource *cs) { unsigned int count1, count2, status; - long offset; + unsigned long flags; + u32 ticks; + local_irq_save(flags); ioc_writeb (0, IOC_T0LATCH); barrier (); count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); @@ -41,27 +45,34 @@ static u32 ioc_timer_gettimeoffset(void) ioc_writeb (0, IOC_T0LATCH); barrier (); count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); + ticks = ioc_time + RPC_LATCH - count2; + local_irq_restore(flags); - offset = count2; if (count2 < count1) { /* - * We have not had an interrupt between reading count1 - * and count2. + * The timer has not reloaded between reading count1 and + * count2, check whether an interrupt was actually pending. */ if (status & (1 << 5)) - offset -= RPC_LATCH; + ticks += RPC_LATCH; } else if (count2 > count1) { /* - * We have just had another interrupt between reading - * count1 and count2. + * The timer has reloaded, so count2 indicates the new + * count since the wrap. The interrupt would not have + * been processed, so add the missed ticks. */ - offset -= RPC_LATCH; + ticks += RPC_LATCH; } - offset = (RPC_LATCH - offset) * (tick_nsec / 1000); - return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000; + return ticks; } +static struct clocksource ioctime_clocksource = { + .read = ioc_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .rating = 100, +}; + void __init ioctime_init(void) { ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL); @@ -72,6 +83,7 @@ void __init ioctime_init(void) static irqreturn_t ioc_timer_interrupt(int irq, void *dev_id) { + ioc_time += RPC_LATCH; timer_tick(); return IRQ_HANDLED; } @@ -86,7 +98,7 @@ static struct irqaction ioc_timer_irq = { */ void __init ioc_timer_init(void) { - arch_gettimeoffset = ioc_timer_gettimeoffset; + WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ)); ioctime_init(); setup_irq(IRQ_TIMER0, &ioc_timer_irq); } -- cgit v1.2.1 From 63a0666bca9311f35017be454587f3ba903644b8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Apr 2019 22:43:49 +0100 Subject: ARM: riscpc: fix lack of keyboard interrupts after irq conversion Fix lack of keyboard interrupts for RiscPC due to incorrect conversion. Fixes: e8d36d5dbb6a ("ARM: kill off set_irq_flags usage") Signed-off-by: Russell King --- arch/arm/mach-rpc/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index b8a61cb11207..7f0f40178634 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -118,7 +118,7 @@ extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end; void __init rpc_init_irq(void) { - unsigned int irq, clr, set = 0; + unsigned int irq, clr, set; iomd_writeb(0, IOMD_IRQMASKA); iomd_writeb(0, IOMD_IRQMASKB); @@ -130,6 +130,7 @@ void __init rpc_init_irq(void) for (irq = 0; irq < NR_IRQS; irq++) { clr = IRQ_NOREQUEST; + set = 0; if (irq <= 6 || (irq >= 9 && irq <= 15)) clr |= IRQ_NOPROBE; -- cgit v1.2.1 From e89e261365588035edd7c8b42a961c1e6c36a567 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 29 Apr 2019 19:24:39 +0100 Subject: ARM: riscpc: fix ecard printing Multiple printk() statements appear to get broken into separate lines, which messes up the formatting. Fix these up. Signed-off-by: Russell King --- arch/arm/mach-rpc/ecard.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index 04b2f22c2739..3e7b81cc4274 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -496,18 +496,21 @@ static void ecard_dump_irq_state(void) printk("Expansion card IRQ state:\n"); for (ec = cards; ec; ec = ec->next) { + const char *claimed; + if (ec->slot_no == 8) continue; - printk(" %d: %sclaimed, ", - ec->slot_no, ec->claimed ? "" : "not "); + claimed = ec->claimed ? "" : "not "; if (ec->ops && ec->ops->irqpending && ec->ops != &ecard_default_ops) - printk("irq %spending\n", + printk(" %d: %sclaimed irq %spending\n", + ec->slot_no, claimed, ec->ops->irqpending(ec) ? "" : "not "); else - printk("irqaddr %p, mask = %02X, status = %02X\n", + printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n", + ec->slot_no, claimed, ec->irqaddr, ec->irqmask, readb(ec->irqaddr)); } } -- cgit v1.2.1 From ffd9a1ba9fdb7f2bd1d1ad9b9243d34e96756ba2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 2 May 2019 17:19:18 +0100 Subject: ARM: riscpc: fix DMA DMA got broken a while back in two different ways: 1) a change in the behaviour of disable_irq() to wait for the interrupt to finish executing causes us to deadlock at the end of DMA. 2) a change to avoid modifying the scatterlist left the first transfer uninitialised. DMA is only used with expansion cards, so has gone unnoticed. Fixes: fa4e99899932 ("[ARM] dma: RiscPC: don't modify DMA SG entries") Signed-off-by: Russell King --- arch/arm/mach-rpc/dma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index fb48f3141fb4..c4c96661eb89 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -131,7 +131,7 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) } while (1); idma->state = ~DMA_ST_AB; - disable_irq(irq); + disable_irq_nosync(irq); return IRQ_HANDLED; } @@ -174,6 +174,9 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma) DMA_FROM_DEVICE : DMA_TO_DEVICE); } + idma->dma_addr = idma->dma.sg->dma_address; + idma->dma_len = idma->dma.sg->length; + iomd_writeb(DMA_CR_C, dma_base + CR); idma->state = DMA_ST_AB; } -- cgit v1.2.1 From 8194468fadaaac5e04558d955e7bff8692212459 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 2 May 2019 17:37:51 +0100 Subject: ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage All we really need is the DMA address and size, we don't need the baggage of a full scatterlist structure. Signed-off-by: Russell King --- arch/arm/mach-rpc/dma.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index c4c96661eb89..37750c6493b4 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -30,7 +30,8 @@ struct iomd_dma { unsigned int state; unsigned long base; /* Controller base address */ int irq; /* Controller IRQ */ - struct scatterlist cur_sg; /* Current controller buffer */ + dma_addr_t cur_addr; + unsigned int cur_len; dma_addr_t dma_addr; unsigned int dma_len; }; @@ -53,13 +54,13 @@ typedef enum { #define CR (IOMD_IO0CR - IOMD_IO0CURA) #define ST (IOMD_IO0ST - IOMD_IO0CURA) -static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) +static void iomd_get_next_sg(struct iomd_dma *idma) { unsigned long end, offset, flags = 0; if (idma->dma.sg) { - sg->dma_address = idma->dma_addr; - offset = sg->dma_address & ~PAGE_MASK; + idma->cur_addr = idma->dma_addr; + offset = idma->cur_addr & ~PAGE_MASK; end = offset + idma->dma_len; @@ -69,7 +70,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) if (offset + TRANSFER_SIZE >= end) flags |= DMA_END_L; - sg->length = end - TRANSFER_SIZE; + idma->cur_len = end - TRANSFER_SIZE; idma->dma_len -= end - offset; idma->dma_addr += end - offset; @@ -87,11 +88,11 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) } } else { flags = DMA_END_S | DMA_END_L; - sg->dma_address = 0; - sg->length = 0; + idma->cur_addr = 0; + idma->cur_len = 0; } - sg->length |= flags; + idma->cur_len |= flags; } static irqreturn_t iomd_dma_handle(int irq, void *dev_id) @@ -107,26 +108,26 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) return IRQ_HANDLED; if ((idma->state ^ status) & DMA_ST_AB) - iomd_get_next_sg(&idma->cur_sg, idma); + iomd_get_next_sg(idma); switch (status & (DMA_ST_OFL | DMA_ST_AB)) { case DMA_ST_OFL: /* OIA */ case DMA_ST_AB: /* .IB */ - iomd_writel(idma->cur_sg.dma_address, base + CURA); - iomd_writel(idma->cur_sg.length, base + ENDA); + iomd_writel(idma->cur_addr, base + CURA); + iomd_writel(idma->cur_len, base + ENDA); idma->state = DMA_ST_AB; break; case DMA_ST_OFL | DMA_ST_AB: /* OIB */ case 0: /* .IA */ - iomd_writel(idma->cur_sg.dma_address, base + CURB); - iomd_writel(idma->cur_sg.length, base + ENDB); + iomd_writel(idma->cur_addr, base + CURB); + iomd_writel(idma->cur_len, base + ENDB); idma->state = 0; break; } if (status & DMA_ST_OFL && - idma->cur_sg.length == (DMA_END_S|DMA_END_L)) + idma->cur_len == (DMA_END_S|DMA_END_L)) break; } while (1); -- cgit v1.2.1 From 39694ed0dbe17de1eff7850e7481bef98047130c Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 2 May 2019 17:43:36 +0100 Subject: ARM: riscpc: dma: make state a local variable Make state a local variable to avoid rewriting it in the DMA loop. Signed-off-by: Russell King --- arch/arm/mach-rpc/dma.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 37750c6493b4..e2b9c95d853b 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -99,15 +99,15 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) { struct iomd_dma *idma = dev_id; unsigned long base = idma->base; + unsigned int state = idma->state; + unsigned int status; do { - unsigned int status; - status = iomd_readb(base + ST); if (!(status & DMA_ST_INT)) - return IRQ_HANDLED; + goto out; - if ((idma->state ^ status) & DMA_ST_AB) + if ((state ^ status) & DMA_ST_AB) iomd_get_next_sg(idma); switch (status & (DMA_ST_OFL | DMA_ST_AB)) { @@ -115,14 +115,14 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) case DMA_ST_AB: /* .IB */ iomd_writel(idma->cur_addr, base + CURA); iomd_writel(idma->cur_len, base + ENDA); - idma->state = DMA_ST_AB; + state = DMA_ST_AB; break; case DMA_ST_OFL | DMA_ST_AB: /* OIB */ case 0: /* .IA */ iomd_writel(idma->cur_addr, base + CURB); iomd_writel(idma->cur_len, base + ENDB); - idma->state = 0; + state = 0; break; } @@ -131,9 +131,10 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) break; } while (1); - idma->state = ~DMA_ST_AB; + state = ~DMA_ST_AB; disable_irq_nosync(irq); - +out: + idma->state = state; return IRQ_HANDLED; } -- cgit v1.2.1 From e659587c64b3d48a9293e34eb854967654ed98f7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 2 May 2019 17:50:55 +0100 Subject: ARM: riscpc: dma: improve address/length writing Rearrange writing the DMA addresses to generate more efficient code. Signed-off-by: Russell King --- arch/arm/mach-rpc/dma.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index e2b9c95d853b..6140472d148e 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -100,7 +100,7 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) struct iomd_dma *idma = dev_id; unsigned long base = idma->base; unsigned int state = idma->state; - unsigned int status; + unsigned int status, cur, end; do { status = iomd_readb(base + ST); @@ -110,21 +110,17 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) if ((state ^ status) & DMA_ST_AB) iomd_get_next_sg(idma); - switch (status & (DMA_ST_OFL | DMA_ST_AB)) { - case DMA_ST_OFL: /* OIA */ - case DMA_ST_AB: /* .IB */ - iomd_writel(idma->cur_addr, base + CURA); - iomd_writel(idma->cur_len, base + ENDA); - state = DMA_ST_AB; - break; - - case DMA_ST_OFL | DMA_ST_AB: /* OIB */ - case 0: /* .IA */ - iomd_writel(idma->cur_addr, base + CURB); - iomd_writel(idma->cur_len, base + ENDB); - state = 0; - break; + // This efficiently implements state = OFL != AB ? AB : 0 + state = ((status >> 2) ^ status) & DMA_ST_AB; + if (state) { + cur = CURA; + end = ENDA; + } else { + cur = CURB; + end = ENDB; } + iomd_writel(idma->cur_addr, base + cur); + iomd_writel(idma->cur_len, base + end); if (status & DMA_ST_OFL && idma->cur_len == (DMA_END_S|DMA_END_L)) -- cgit v1.2.1 From 090a37ceda3ecb02061a1415239aa1a64c184833 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 2 May 2019 17:56:49 +0100 Subject: ARM: riscpc: dma: use __iomem pointers for writing DMA Use __iomem pointers for efficiency to write the DMA registers. This avoids the compiler emitting several instructions for each access to calculate the register address. Signed-off-by: Russell King --- arch/arm/mach-rpc/dma.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 6140472d148e..eeda808a7320 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -27,9 +27,9 @@ struct iomd_dma { struct dma_struct dma; - unsigned int state; - unsigned long base; /* Controller base address */ + void __iomem *base; /* Controller base address */ int irq; /* Controller IRQ */ + unsigned int state; dma_addr_t cur_addr; unsigned int cur_len; dma_addr_t dma_addr; @@ -98,12 +98,12 @@ static void iomd_get_next_sg(struct iomd_dma *idma) static irqreturn_t iomd_dma_handle(int irq, void *dev_id) { struct iomd_dma *idma = dev_id; - unsigned long base = idma->base; + void __iomem *base = idma->base; unsigned int state = idma->state; unsigned int status, cur, end; do { - status = iomd_readb(base + ST); + status = readb(base + ST); if (!(status & DMA_ST_INT)) goto out; @@ -119,8 +119,8 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) cur = CURB; end = ENDB; } - iomd_writel(idma->cur_addr, base + cur); - iomd_writel(idma->cur_len, base + end); + writel(idma->cur_addr, base + cur); + writel(idma->cur_len, base + end); if (status & DMA_ST_OFL && idma->cur_len == (DMA_END_S|DMA_END_L)) @@ -152,7 +152,7 @@ static void iomd_free_dma(unsigned int chan, dma_t *dma) static void iomd_enable_dma(unsigned int chan, dma_t *dma) { struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); - unsigned long dma_base = idma->base; + void __iomem *base = idma->base; unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E; if (idma->dma.invalid) { @@ -175,27 +175,27 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma) idma->dma_addr = idma->dma.sg->dma_address; idma->dma_len = idma->dma.sg->length; - iomd_writeb(DMA_CR_C, dma_base + CR); + writeb(DMA_CR_C, base + CR); idma->state = DMA_ST_AB; } if (idma->dma.dma_mode == DMA_MODE_READ) ctrl |= DMA_CR_D; - iomd_writeb(ctrl, dma_base + CR); + writeb(ctrl, base + CR); enable_irq(idma->irq); } static void iomd_disable_dma(unsigned int chan, dma_t *dma) { struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); - unsigned long dma_base = idma->base; + void __iomem *base = idma->base; unsigned long flags; local_irq_save(flags); if (idma->state != ~DMA_ST_AB) disable_irq(idma->irq); - iomd_writeb(0, dma_base + CR); + writeb(0, base + CR); local_irq_restore(flags); } @@ -358,17 +358,17 @@ static int __init rpc_dma_init(void) */ iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT); - iomd_dma[DMA_0].base = IOMD_IO0CURA; + iomd_dma[DMA_0].base = IOMD_BASE + IOMD_IO0CURA; iomd_dma[DMA_0].irq = IRQ_DMA0; - iomd_dma[DMA_1].base = IOMD_IO1CURA; + iomd_dma[DMA_1].base = IOMD_BASE + IOMD_IO1CURA; iomd_dma[DMA_1].irq = IRQ_DMA1; - iomd_dma[DMA_2].base = IOMD_IO2CURA; + iomd_dma[DMA_2].base = IOMD_BASE + IOMD_IO2CURA; iomd_dma[DMA_2].irq = IRQ_DMA2; - iomd_dma[DMA_3].base = IOMD_IO3CURA; + iomd_dma[DMA_3].base = IOMD_BASE + IOMD_IO3CURA; iomd_dma[DMA_3].irq = IRQ_DMA3; - iomd_dma[DMA_S0].base = IOMD_SD0CURA; + iomd_dma[DMA_S0].base = IOMD_BASE + IOMD_SD0CURA; iomd_dma[DMA_S0].irq = IRQ_DMAS0; - iomd_dma[DMA_S1].base = IOMD_SD1CURA; + iomd_dma[DMA_S1].base = IOMD_BASE + IOMD_SD1CURA; iomd_dma[DMA_S1].irq = IRQ_DMAS1; for (i = DMA_0; i <= DMA_S1; i++) { -- cgit v1.2.1 From 59f06d674f380644fb85b14a1eb7259ef291eb7b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:52 +0100 Subject: ARM: sa1100/assabet: convert serial to gpiod APIs Convert the Assabet serial modem control signals to use the gpiod APIs rather than custom callbacks into platform code. Signed-off-by: Russell King --- arch/arm/mach-sa1100/assabet.c | 91 +++++++++++++----------------------------- 1 file changed, 28 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d09c3f236186..bc035821a42b 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -522,6 +522,29 @@ static const struct gpio_keys_platform_data assabet_keys_pdata = { .rep = 0, }; +static struct gpiod_lookup_table assabet_uart1_gpio_table = { + .dev_id = "sa11x0-uart.1", + .table = { + GPIO_LOOKUP("assabet", 16, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 17, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 25, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 26, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 27, "dsr", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table assabet_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("assabet", 28, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 29, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 30, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 31, "rng", GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init assabet_init(void) { /* @@ -568,7 +591,10 @@ static void __init assabet_init(void) neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } else { + gpiod_add_lookup_table(&assabet_uart1_gpio_table); + gpiod_add_lookup_table(&assabet_uart3_gpio_table); gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table); + sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata, assabet_cf_vcc_consumers, ARRAY_SIZE(assabet_cf_vcc_consumers), @@ -658,74 +684,13 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { if (port->mapbase == _Ser1UTCR0) { if (state) - ASSABET_BCR_clear(ASSABET_BCR_RS232EN | - ASSABET_BCR_COM_RTS | - ASSABET_BCR_COM_DTR); - else - ASSABET_BCR_set(ASSABET_BCR_RS232EN | - ASSABET_BCR_COM_RTS | - ASSABET_BCR_COM_DTR); - } -} - -/* - * Assabet uses COM_RTS and COM_DTR for both UART1 (com port) - * and UART3 (radio module). We only handle them for UART1 here. - */ -static void assabet_set_mctrl(struct uart_port *port, u_int mctrl) -{ - if (port->mapbase == _Ser1UTCR0) { - u_int set = 0, clear = 0; - - if (mctrl & TIOCM_RTS) - clear |= ASSABET_BCR_COM_RTS; + ASSABET_BCR_clear(ASSABET_BCR_RS232EN); else - set |= ASSABET_BCR_COM_RTS; - - if (mctrl & TIOCM_DTR) - clear |= ASSABET_BCR_COM_DTR; - else - set |= ASSABET_BCR_COM_DTR; - - ASSABET_BCR_clear(clear); - ASSABET_BCR_set(set); - } -} - -static u_int assabet_get_mctrl(struct uart_port *port) -{ - u_int ret = 0; - u_int bsr = ASSABET_BSR; - - /* need 2 reads to read current value */ - bsr = ASSABET_BSR; - - if (port->mapbase == _Ser1UTCR0) { - if (bsr & ASSABET_BSR_COM_DCD) - ret |= TIOCM_CD; - if (bsr & ASSABET_BSR_COM_CTS) - ret |= TIOCM_CTS; - if (bsr & ASSABET_BSR_COM_DSR) - ret |= TIOCM_DSR; - } else if (port->mapbase == _Ser3UTCR0) { - if (bsr & ASSABET_BSR_RAD_DCD) - ret |= TIOCM_CD; - if (bsr & ASSABET_BSR_RAD_CTS) - ret |= TIOCM_CTS; - if (bsr & ASSABET_BSR_RAD_DSR) - ret |= TIOCM_DSR; - if (bsr & ASSABET_BSR_RAD_RI) - ret |= TIOCM_RI; - } else { - ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; + ASSABET_BCR_set(ASSABET_BCR_RS232EN); } - - return ret; } static struct sa1100_port_fns assabet_port_fns __initdata = { - .set_mctrl = assabet_set_mctrl, - .get_mctrl = assabet_get_mctrl, .pm = assabet_uart_pm, }; -- cgit v1.2.1 From 3fae166e6799fc51c8e262d9ce48452be12bf5f2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:52 +0100 Subject: ARM: sa1100/h3xxx: convert serial to gpiod APIs Convert the iPAQ H3xxx serial modem control signals to use the gpiod APIs rather than custom callbacks into platform code. Acked-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-sa1100/h3xxx.c | 64 ++++++++------------------------------------ 1 file changed, 11 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index 36a78b0c106f..e7362292612a 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -87,57 +87,6 @@ static struct resource h3xxx_flash_resource = /* * H3xxx uart support */ -static struct gpio h3xxx_uart_gpio[] = { - { H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" }, - { H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" }, - { H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" }, -}; - -static bool h3xxx_uart_request_gpios(void) -{ - static bool h3xxx_uart_gpio_ok; - int rc; - - if (h3xxx_uart_gpio_ok) - return true; - - rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio)); - if (rc) - pr_err("h3xxx_uart_request_gpios: error %d\n", rc); - else - h3xxx_uart_gpio_ok = true; - - return h3xxx_uart_gpio_ok; -} - -static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl) -{ - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return; - gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS)); - } -} - -static u_int h3xxx_uart_get_mctrl(struct uart_port *port) -{ - u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return ret; - /* - * DCD and CTS bits are inverted in GPLR by RS232 transceiver - */ - if (gpio_get_value(H3XXX_GPIO_COM_DCD)) - ret &= ~TIOCM_CD; - if (gpio_get_value(H3XXX_GPIO_COM_CTS)) - ret &= ~TIOCM_CTS; - } - - return ret; -} - static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { if (port->mapbase == _Ser3UTCR0) { @@ -170,12 +119,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable) } static struct sa1100_port_fns h3xxx_port_fns __initdata = { - .set_mctrl = h3xxx_uart_set_mctrl, - .get_mctrl = h3xxx_uart_get_mctrl, .pm = h3xxx_uart_pm, .set_wake = h3xxx_uart_set_wake, }; +static struct gpiod_lookup_table h3xxx_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW), + { }, + }, +}; + /* * EGPIO */ @@ -283,6 +240,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = { void __init h3xxx_mach_init(void) { gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table); + gpiod_add_lookup_table(&h3xxx_uart3_gpio_table); sa1100_register_uart_fns(&h3xxx_port_fns); sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1); platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices)); -- cgit v1.2.1 From 88a4c748ba10a7006fc2eabb1a4ff22a705dd4b7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:52 +0100 Subject: ARM: sa1100/badge4: remove commented out modem control initialisers Remove the commented out modem control initialisers. These are doing nothing useful. Signed-off-by: Russell King --- arch/arm/mach-sa1100/badge4.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 63361b6d04e9..17d28b4dab5e 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -315,8 +315,6 @@ badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate) } static struct sa1100_port_fns badge4_port_fns __initdata = { - //.get_mctrl = badge4_get_mctrl, - //.set_mctrl = badge4_set_mctrl, .pm = badge4_uart_pm, }; -- cgit v1.2.1 From cf56ffaa51a794749f2faa619eb5156a84308a18 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:52 +0100 Subject: ARM: sa1100/hackkit: remove empty serial mctrl functions Remove the empty serial modem control signal functions from hackkit as these are unnecessary - the core code can copes fine without these. Signed-off-by: Russell King --- arch/arm/mach-sa1100/hackkit.c | 48 ------------------------------------------ 1 file changed, 48 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 643d5f2d9af9..9faf602666cf 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -49,8 +49,6 @@ /* init funcs */ static void __init hackkit_map_io(void); -static u_int hackkit_get_mctrl(struct uart_port *port); -static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl); static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate); /********************************************************************** @@ -71,8 +69,6 @@ static struct map_desc hackkit_io_desc[] __initdata = { }; static struct sa1100_port_fns hackkit_port_fns __initdata = { - .set_mctrl = hackkit_set_mctrl, - .get_mctrl = hackkit_get_mctrl, .pm = hackkit_uart_pm, }; @@ -105,50 +101,6 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate) /* TODO: switch on/off uart in powersave mode */ } -/* - * Note! this can be called from IRQ context. - * FIXME: No modem ctrl lines yet. - */ -static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl) -{ -#if 0 - if (port->mapbase == _Ser1UTCR0) { - u_int set = 0, clear = 0; - - if (mctrl & TIOCM_RTS) - set |= PT_CTRL2_RS1_RTS; - else - clear |= PT_CTRL2_RS1_RTS; - - if (mctrl & TIOCM_DTR) - set |= PT_CTRL2_RS1_DTR; - else - clear |= PT_CTRL2_RS1_DTR; - - PTCTRL2_clear(clear); - PTCTRL2_set(set); - } -#endif -} - -static u_int hackkit_get_mctrl(struct uart_port *port) -{ - u_int ret = 0; -#if 0 - u_int irqsr = PT_IRQSR; - - /* need 2 reads to read current value */ - irqsr = PT_IRQSR; - - /* TODO: check IRQ source register for modem/com - status lines and set them correctly. */ -#endif - - ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - - return ret; -} - static struct mtd_partition hackkit_partitions[] = { { .name = "BLOB", -- cgit v1.2.1 From 5c9e4d8c844a2d31b6d1a4a892c0def4e12e8a8c Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:52 +0100 Subject: ARM: sa1100/neponset: convert serial to use gpiod APIs Convert the serial modem control signals to use the gpiod APIs rather than the private platform callbacks. Signed-off-by: Russell King --- arch/arm/mach-sa1100/neponset.c | 109 +++++++++++----------------------------- 1 file changed, 28 insertions(+), 81 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index a671e4c994cf..6876bc1e33b4 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -49,23 +48,8 @@ #define IRR_SA1111 (1 << 2) #define NCR_NGPIO 7 - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) #define MDM_CTL0_NGPIO 4 - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) #define MDM_CTL1_NGPIO 6 - -#define AUD_SEL_1341 (1 << 0) -#define AUD_MUTE_1341 (1 << 1) #define AUD_NGPIO 2 extern void sa1110_mb_disable(void); @@ -97,6 +81,30 @@ struct neponset_drvdata { struct gpio_chip *gpio[4]; }; +static struct gpiod_lookup_table neponset_uart1_gpio_table = { + .dev_id = "sa11x0-uart.1", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table neponset_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct gpiod_lookup_table neponset_pcmcia_table = { .dev_id = "1800", .table = { @@ -124,69 +132,6 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val) } EXPORT_SYMBOL(neponset_ncr_frob); -static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) -{ - struct neponset_drvdata *n = nep; - unsigned long mask, val = 0; - - if (!n) - return; - - if (port->mapbase == _Ser1UTCR0) { - mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2; - - if (!(mctrl & TIOCM_RTS)) - val |= MDM_CTL0_RTS2; - - if (!(mctrl & TIOCM_DTR)) - val |= MDM_CTL0_DTR2; - } else if (port->mapbase == _Ser3UTCR0) { - mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1; - - if (!(mctrl & TIOCM_RTS)) - val |= MDM_CTL0_RTS1; - - if (!(mctrl & TIOCM_DTR)) - val |= MDM_CTL0_DTR1; - } - - n->gpio[1]->set_multiple(n->gpio[1], &mask, &val); -} - -static u_int neponset_get_mctrl(struct uart_port *port) -{ - void __iomem *base = nep->base; - u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - u_int mdm_ctl1; - - if (!base) - return ret; - - mdm_ctl1 = readb_relaxed(base + MDM_CTL_1); - if (port->mapbase == _Ser1UTCR0) { - if (mdm_ctl1 & MDM_CTL1_DCD2) - ret &= ~TIOCM_CD; - if (mdm_ctl1 & MDM_CTL1_CTS2) - ret &= ~TIOCM_CTS; - if (mdm_ctl1 & MDM_CTL1_DSR2) - ret &= ~TIOCM_DSR; - } else if (port->mapbase == _Ser3UTCR0) { - if (mdm_ctl1 & MDM_CTL1_DCD1) - ret &= ~TIOCM_CD; - if (mdm_ctl1 & MDM_CTL1_CTS1) - ret &= ~TIOCM_CTS; - if (mdm_ctl1 & MDM_CTL1_DSR1) - ret &= ~TIOCM_DSR; - } - - return ret; -} - -static struct sa1100_port_fns neponset_port_fns = { - .set_mctrl = neponset_set_mctrl, - .get_mctrl = neponset_get_mctrl, -}; - /* * Install handler for Neponset IRQ. Note that we have to loop here * since the ETHERNET and USAR IRQs are level based, and we need to @@ -388,6 +333,8 @@ static int neponset_probe(struct platform_device *dev) d->base + AUD_CTL, AUD_NGPIO, false, neponset_aud_names); + gpiod_add_lookup_table(&neponset_uart1_gpio_table); + gpiod_add_lookup_table(&neponset_uart3_gpio_table); gpiod_add_lookup_table(&neponset_pcmcia_table); /* @@ -402,8 +349,6 @@ static int neponset_probe(struct platform_device *dev) d->irq_base, d->irq_base + NEP_IRQ_NR - 1); nep = d; - sa1100_register_uart_fns(&neponset_port_fns); - /* Ensure that the memory bus request/grant signals are setup */ sa1110_mb_disable(); @@ -442,6 +387,8 @@ static int neponset_remove(struct platform_device *dev) platform_device_unregister(d->smc91x); gpiod_remove_lookup_table(&neponset_pcmcia_table); + gpiod_remove_lookup_table(&neponset_uart3_gpio_table); + gpiod_remove_lookup_table(&neponset_uart1_gpio_table); irq_set_chained_handler(irq, NULL); irq_free_descs(d->irq_base, NEP_IRQ_NR); -- cgit v1.2.1 From 1eac59d731ca7ead31f57ea2b8c82e0ba117f6cf Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 1 May 2019 12:10:42 +0100 Subject: ARM: riscpc: add ecard quirk for Atomwide 3port serial card Atomwide 3port serial cards seem to leave their interrupts active when exiting RISC OS, resulting in an interrupt storm during boot, and the expansion card interrupt being disabled. Avoid this by manually disabling the interrupt on each serial port via a custom quirk function. Signed-off-by: Russell King --- arch/arm/mach-rpc/ecard.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index 3e7b81cc4274..eec5ecd6e948 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -70,17 +70,21 @@ struct expcard_blacklist { unsigned short manufacturer; unsigned short product; const char *type; + void (*init)(ecard_t *ec); }; static ecard_t *cards; static ecard_t *slot_to_expcard[MAX_ECARDS]; static unsigned int ectcr; +static void atomwide_3p_quirk(ecard_t *ec); + /* List of descriptions of cards which don't have an extended * identification, or chunk directories containing a description. */ static struct expcard_blacklist __initdata blacklist[] = { - { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" } + { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }, + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk }, }; asmlinkage extern int @@ -871,6 +875,16 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, } EXPORT_SYMBOL(ecardm_iomap); +static void atomwide_3p_quirk(ecard_t *ec) +{ + void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC); + unsigned int i; + + /* Disable interrupts on each port */ + for (i = 0x2000; i <= 0x2800; i += 0x0400) + writeb(0, addr + i + 4); +} + /* * Probe for an expansion card. * @@ -927,7 +941,10 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type) for (i = 0; i < ARRAY_SIZE(blacklist); i++) if (blacklist[i].manufacturer == ec->cid.manufacturer && blacklist[i].product == ec->cid.product) { - ec->card_desc = blacklist[i].type; + if (blacklist[i].type) + ec->card_desc = blacklist[i].type; + if (blacklist[i].init) + blacklist[i].init(ec); break; } -- cgit v1.2.1 From e579201a832cb796a474ef743d131eff2730cfa7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Apr 2019 23:06:03 +0100 Subject: ARM: riscpc: parse video information from tagged list Correctly parse the video information from the tagged list, so that we end up with the right bytes-per-char values. When booting with a tagged list rather than a param block, this allows the decompressor to display its messages during boot on the screen. (Boot loaders normally pass a param block on this platform, but the latest boot loader version recently released does not.) Signed-off-by: Russell King --- arch/arm/mach-rpc/include/mach/uncompress.h | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index 654a6f3f2547..edc1961e8d1e 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -118,29 +118,22 @@ static void arch_decomp_setup(void) struct tag *t = (struct tag *)params; unsigned int nr_pages = 0, page_size = PAGE_SIZE; - if (t->hdr.tag == ATAG_CORE) - { - for (; t->hdr.size; t = tag_next(t)) - { - if (t->hdr.tag == ATAG_VIDEOTEXT) - { + if (t->hdr.tag == ATAG_CORE) { + for (; t->hdr.size; t = tag_next(t)) { + if (t->hdr.tag == ATAG_VIDEOTEXT) { video_num_rows = t->u.videotext.video_lines; video_num_cols = t->u.videotext.video_cols; - bytes_per_char_h = t->u.videotext.video_points; - bytes_per_char_v = t->u.videotext.video_points; video_x = t->u.videotext.x; video_y = t->u.videotext.y; - } - - if (t->hdr.tag == ATAG_MEM) - { + } else if (t->hdr.tag == ATAG_VIDEOLFB) { + bytes_per_char_h = t->u.videolfb.lfb_depth; + bytes_per_char_v = 8; + } else if (t->hdr.tag == ATAG_MEM) { page_size = PAGE_SIZE; nr_pages += (t->u.mem.size / PAGE_SIZE); } } - } - else - { + } else { nr_pages = params->nr_pages; page_size = params->page_size; video_num_rows = params->video_num_rows; -- cgit v1.2.1 From 12290cc462c24deee503e84e87dea622b40ea15d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 May 2019 15:31:42 +0100 Subject: ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc Move the assembly files for RiscPC from arch/arm/lib to mach-rpc so that we contain RiscPC bits in one subdirectory. Signed-off-by: Russell King --- arch/arm/lib/Makefile | 1 - arch/arm/lib/ecard.S | 44 ---------------------------------------- arch/arm/lib/floppydma.S | 32 ----------------------------- arch/arm/lib/io-acorn.S | 32 ----------------------------- arch/arm/mach-rpc/Makefile | 3 ++- arch/arm/mach-rpc/ecard-loader.S | 44 ++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-rpc/floppydma.S | 32 +++++++++++++++++++++++++++++ arch/arm/mach-rpc/io-acorn.S | 32 +++++++++++++++++++++++++++++ 8 files changed, 110 insertions(+), 110 deletions(-) delete mode 100644 arch/arm/lib/ecard.S delete mode 100644 arch/arm/lib/floppydma.S delete mode 100644 arch/arm/lib/io-acorn.S create mode 100644 arch/arm/mach-rpc/ecard-loader.S create mode 100644 arch/arm/mach-rpc/floppydma.S create mode 100644 arch/arm/mach-rpc/io-acorn.S (limited to 'arch') diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 0bff0176db2c..b25c54585048 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -31,7 +31,6 @@ else endif ifeq ($(CONFIG_ARCH_RPC),y) - lib-y += ecard.o io-acorn.o floppydma.o AFLAGS_delay-loop.o += -march=armv4 endif diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S deleted file mode 100644 index e6057fa851bb..000000000000 --- a/arch/arm/lib/ecard.S +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/arch/arm/lib/ecard.S - * - * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 27/03/03 Ian Molton Clean up CONFIG_CPU - * - */ -#include -#include - -#define CPSR2SPSR(rt) \ - mrs rt, cpsr; \ - msr spsr_cxsf, rt - -@ Purpose: call an expansion card loader to read bytes. -@ Proto : char read_loader(int offset, char *card_base, char *loader); -@ Returns: byte read - -ENTRY(ecard_loader_read) - stmfd sp!, {r4 - r12, lr} - mov r11, r1 - mov r1, r0 - CPSR2SPSR(r0) - mov lr, pc - mov pc, r2 - ldmfd sp!, {r4 - r12, pc} - -@ Purpose: call an expansion card loader to reset the card -@ Proto : void read_loader(int card_base, char *loader); -@ Returns: byte read - -ENTRY(ecard_loader_reset) - stmfd sp!, {r4 - r12, lr} - mov r11, r0 - CPSR2SPSR(r0) - mov lr, pc - add pc, r1, #8 - ldmfd sp!, {r4 - r12, pc} - diff --git a/arch/arm/lib/floppydma.S b/arch/arm/lib/floppydma.S deleted file mode 100644 index de68d3b343e3..000000000000 --- a/arch/arm/lib/floppydma.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/arch/arm/lib/floppydma.S - * - * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - .text - - .global floppy_fiqin_end -ENTRY(floppy_fiqin_start) - subs r9, r9, #1 - ldrbgt r12, [r11, #-4] - ldrble r12, [r11], #0 - strb r12, [r10], #1 - subs pc, lr, #4 -floppy_fiqin_end: - - .global floppy_fiqout_end -ENTRY(floppy_fiqout_start) - subs r9, r9, #1 - ldrbge r12, [r10], #1 - movlt r12, #0 - strble r12, [r11], #0 - subsle pc, lr, #4 - strb r12, [r11, #-4] - subs pc, lr, #4 -floppy_fiqout_end: diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S deleted file mode 100644 index 69719bad674d..000000000000 --- a/arch/arm/lib/io-acorn.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/arch/arm/lib/io-acorn.S - * - * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 27/03/03 Ian Molton Clean up CONFIG_CPU - * - */ -#include -#include -#include - - .text - .align - -.Liosl_warning: - .ascii KERN_WARNING "insl/outsl not implemented, called from %08lX\0" - .align - -/* - * These make no sense on Acorn machines. - * Print a warning message. - */ -ENTRY(insl) -ENTRY(outsl) - adr r0, .Liosl_warning - mov r1, lr - b printk diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index 2ebc6875aeb8..ab964a66ea2a 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -4,4 +4,5 @@ # Object file lists. -obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o +obj-y :=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \ + riscpc.o time.o diff --git a/arch/arm/mach-rpc/ecard-loader.S b/arch/arm/mach-rpc/ecard-loader.S new file mode 100644 index 000000000000..e6057fa851bb --- /dev/null +++ b/arch/arm/mach-rpc/ecard-loader.S @@ -0,0 +1,44 @@ +/* + * linux/arch/arm/lib/ecard.S + * + * Copyright (C) 1995, 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 27/03/03 Ian Molton Clean up CONFIG_CPU + * + */ +#include +#include + +#define CPSR2SPSR(rt) \ + mrs rt, cpsr; \ + msr spsr_cxsf, rt + +@ Purpose: call an expansion card loader to read bytes. +@ Proto : char read_loader(int offset, char *card_base, char *loader); +@ Returns: byte read + +ENTRY(ecard_loader_read) + stmfd sp!, {r4 - r12, lr} + mov r11, r1 + mov r1, r0 + CPSR2SPSR(r0) + mov lr, pc + mov pc, r2 + ldmfd sp!, {r4 - r12, pc} + +@ Purpose: call an expansion card loader to reset the card +@ Proto : void read_loader(int card_base, char *loader); +@ Returns: byte read + +ENTRY(ecard_loader_reset) + stmfd sp!, {r4 - r12, lr} + mov r11, r0 + CPSR2SPSR(r0) + mov lr, pc + add pc, r1, #8 + ldmfd sp!, {r4 - r12, pc} + diff --git a/arch/arm/mach-rpc/floppydma.S b/arch/arm/mach-rpc/floppydma.S new file mode 100644 index 000000000000..de68d3b343e3 --- /dev/null +++ b/arch/arm/mach-rpc/floppydma.S @@ -0,0 +1,32 @@ +/* + * linux/arch/arm/lib/floppydma.S + * + * Copyright (C) 1995, 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + .text + + .global floppy_fiqin_end +ENTRY(floppy_fiqin_start) + subs r9, r9, #1 + ldrbgt r12, [r11, #-4] + ldrble r12, [r11], #0 + strb r12, [r10], #1 + subs pc, lr, #4 +floppy_fiqin_end: + + .global floppy_fiqout_end +ENTRY(floppy_fiqout_start) + subs r9, r9, #1 + ldrbge r12, [r10], #1 + movlt r12, #0 + strble r12, [r11], #0 + subsle pc, lr, #4 + strb r12, [r11, #-4] + subs pc, lr, #4 +floppy_fiqout_end: diff --git a/arch/arm/mach-rpc/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S new file mode 100644 index 000000000000..69719bad674d --- /dev/null +++ b/arch/arm/mach-rpc/io-acorn.S @@ -0,0 +1,32 @@ +/* + * linux/arch/arm/lib/io-acorn.S + * + * Copyright (C) 1995, 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 27/03/03 Ian Molton Clean up CONFIG_CPU + * + */ +#include +#include +#include + + .text + .align + +.Liosl_warning: + .ascii KERN_WARNING "insl/outsl not implemented, called from %08lX\0" + .align + +/* + * These make no sense on Acorn machines. + * Print a warning message. + */ +ENTRY(insl) +ENTRY(outsl) + adr r0, .Liosl_warning + mov r1, lr + b printk -- cgit v1.2.1 From 05002cf1779ace3b0e1ed6a8cd6c67876fd47d9d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 May 2019 16:30:38 +0100 Subject: ARM: riscpc: reduce IRQ handling code Reduce the amount of IRQ handling code that RiscPC requires; there's no need for this duplication if we place the virtual iomem base address for each bank directly in the irq_data structure. Provide helpers to get the base address, and setup the base address and register mask. Signed-off-by: Russell King --- arch/arm/mach-rpc/irq.c | 133 +++++++++++++++++------------------------------- 1 file changed, 47 insertions(+), 86 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index 7f0f40178634..803aeb126f0e 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -8,110 +8,64 @@ #include #include -static void iomd_ack_irq_a(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val & ~mask, IOMD_IRQMASKA); - iomd_writeb(mask, IOMD_IRQCLRA); -} - -static void iomd_mask_irq_a(struct irq_data *d) -{ - unsigned int val, mask; +// These are offsets from the stat register for each IRQ bank +#define STAT 0x00 +#define REQ 0x04 +#define CLR 0x04 +#define MASK 0x08 - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val & ~mask, IOMD_IRQMASKA); -} - -static void iomd_unmask_irq_a(struct irq_data *d) +static void __iomem *iomd_get_base(struct irq_data *d) { - unsigned int val, mask; + void *cd = irq_data_get_irq_chip_data(d); - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val | mask, IOMD_IRQMASKA); + return (void __iomem *)(unsigned long)cd; } -static struct irq_chip iomd_a_chip = { - .irq_ack = iomd_ack_irq_a, - .irq_mask = iomd_mask_irq_a, - .irq_unmask = iomd_unmask_irq_a, -}; - -static void iomd_mask_irq_b(struct irq_data *d) +static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask) { - unsigned int val, mask; + struct irq_data *d = irq_get_irq_data(irq); - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_IRQMASKB); - iomd_writeb(val & ~mask, IOMD_IRQMASKB); + d->mask = mask; + irq_set_chip_data(irq, (void *)(unsigned long)base); } -static void iomd_unmask_irq_b(struct irq_data *d) +static void iomd_irq_mask_ack(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_IRQMASKB); - iomd_writeb(val | mask, IOMD_IRQMASKB); + val = readb(base + MASK); + writeb(val & ~mask, base + MASK); + writeb(mask, base + CLR); } -static struct irq_chip iomd_b_chip = { - .irq_ack = iomd_mask_irq_b, - .irq_mask = iomd_mask_irq_b, - .irq_unmask = iomd_unmask_irq_b, -}; - -static void iomd_mask_irq_dma(struct irq_data *d) +static void iomd_irq_mask(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_DMAMASK); - iomd_writeb(val & ~mask, IOMD_DMAMASK); + val = readb(base + MASK); + writeb(val & ~mask, base + MASK); } -static void iomd_unmask_irq_dma(struct irq_data *d) +static void iomd_irq_unmask(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_DMAMASK); - iomd_writeb(val | mask, IOMD_DMAMASK); + val = readb(base + MASK); + writeb(val | mask, base + MASK); } -static struct irq_chip iomd_dma_chip = { - .irq_ack = iomd_mask_irq_dma, - .irq_mask = iomd_mask_irq_dma, - .irq_unmask = iomd_unmask_irq_dma, +static struct irq_chip iomd_chip_clr = { + .irq_mask_ack = iomd_irq_mask_ack, + .irq_mask = iomd_irq_mask, + .irq_unmask = iomd_irq_unmask, }; -static void iomd_mask_irq_fiq(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_FIQMASK); - iomd_writeb(val & ~mask, IOMD_FIQMASK); -} - -static void iomd_unmask_irq_fiq(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_FIQMASK); - iomd_writeb(val | mask, IOMD_FIQMASK); -} - -static struct irq_chip iomd_fiq_chip = { - .irq_ack = iomd_mask_irq_fiq, - .irq_mask = iomd_mask_irq_fiq, - .irq_unmask = iomd_unmask_irq_fiq, +static struct irq_chip iomd_chip_noclr = { + .irq_mask = iomd_irq_mask, + .irq_unmask = iomd_irq_unmask, }; extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end; @@ -141,30 +95,37 @@ void __init rpc_init_irq(void) switch (irq) { case 0 ... 7: - irq_set_chip_and_handler(irq, &iomd_a_chip, + irq_set_chip_and_handler(irq, &iomd_chip_clr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA, + BIT(irq)); break; case 8 ... 15: - irq_set_chip_and_handler(irq, &iomd_b_chip, + irq_set_chip_and_handler(irq, &iomd_chip_noclr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB, + BIT(irq - 8)); break; case 16 ... 21: - irq_set_chip_and_handler(irq, &iomd_dma_chip, + irq_set_chip_and_handler(irq, &iomd_chip_noclr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT, + BIT(irq - 16)); break; case 64 ... 71: - irq_set_chip(irq, &iomd_fiq_chip); + irq_set_chip(irq, &iomd_chip_noclr); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT, + BIT(irq - 64)); break; } } init_FIQ(FIQ_START); } - -- cgit v1.2.1 From 0b40deeef6d94ac21f4cdee4b1cda94a69c54ff9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 4 May 2019 13:35:12 +0100 Subject: ARM: riscpc: enable chained scatterlist support There's no reason why we can't enable chained scatterlist for RiscPC, we already support chained scatterlists in the IOMD DMA support code. Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 08a4915a69d2..e94619684a82 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -528,6 +528,7 @@ config ARCH_RPC select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE + select ARM_HAS_SG_CHAIN select CPU_SA110 select FIQ select HAVE_IDE -- cgit v1.2.1 From d6c8204659eb1846c444997ee28fe9d7e5442f4e Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:53 +0100 Subject: ARM: sa1100: convert to common clock framework Convert sa1100 to use the common clock framework. Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-sa1100/clock.c | 220 ++++++++++++++++++------------------------- 2 files changed, 95 insertions(+), 126 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8869742a85df..70aebb6d2905 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -549,6 +549,7 @@ config ARCH_SA1100 select CLKSRC_MMIO select CLKSRC_PXA select TIMER_OF if OF + select COMMON_CLK select CPU_FREQ select CPU_SA1100 select GENERIC_CLOCKEVENTS diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index 6199e87447ca..e8691921c69a 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -2,176 +2,144 @@ /* * linux/arch/arm/mach-sa1100/clock.c */ -#include #include -#include -#include #include #include -#include #include -#include -#include -#include #include +#include +#include +#include #include #include -struct clkops { - void (*enable)(struct clk *); - void (*disable)(struct clk *); - unsigned long (*get_rate)(struct clk *); +static const char * const clk_tucr_parents[] = { + "clk32768", "clk3686400", }; -struct clk { - const struct clkops *ops; - unsigned int enabled; -}; - -#define DEFINE_CLK(_name, _ops) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - } - -static DEFINE_SPINLOCK(clocks_lock); - -/* Dummy clk routine to build generic kernel parts that may be using them */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return clk_get_rate(clk); -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - return 0; -} -EXPORT_SYMBOL(clk_set_parent); +static DEFINE_SPINLOCK(tucr_lock); -struct clk *clk_get_parent(struct clk *clk) +static int clk_gpio27_enable(struct clk_hw *hw) { - return NULL; -} -EXPORT_SYMBOL(clk_get_parent); + unsigned long flags; -static void clk_gpio27_enable(struct clk *clk) -{ /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: * (SA-1110 Developer's Manual, section 9.1.2.1) */ + local_irq_save(flags); GAFR |= GPIO_32_768kHz; GPDR |= GPIO_32_768kHz; - TUCR = TUCR_3_6864MHz; + local_irq_restore(flags); + + return 0; } -static void clk_gpio27_disable(struct clk *clk) +static void clk_gpio27_disable(struct clk_hw *hw) { - TUCR = 0; + unsigned long flags; + + local_irq_save(flags); GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; + local_irq_restore(flags); } -static void clk_cpu_enable(struct clk *clk) -{ -} +static const struct clk_ops clk_gpio27_ops = { + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; -static void clk_cpu_disable(struct clk *clk) -{ -} +static const char * const clk_gpio27_parents[] = { + "tucr-mux", +}; -static unsigned long clk_cpu_get_rate(struct clk *clk) +static const struct clk_init_data clk_gpio27_init_data __initconst = { + .name = "gpio27", + .ops = &clk_gpio27_ops, + .parent_names = clk_gpio27_parents, + .num_parents = ARRAY_SIZE(clk_gpio27_parents), +}; + +/* + * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to + * multiply its input rate by 4 x (4 + PPCR). This calculation gives + * the exact rate. The figures given in the table are the rates rounded + * to 100kHz. Stick with sa11x0_getspeed() for the time being. + */ +static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw, + unsigned long prate) { return sa11x0_getspeed(0) * 1000; } -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (clk) { - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) - clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } - - return 0; -} -EXPORT_SYMBOL(clk_enable); +static const struct clk_ops clk_mpll_ops = { + .recalc_rate = clk_mpll_recalc_rate, +}; -void clk_disable(struct clk *clk) -{ - unsigned long flags; +static const char * const clk_mpll_parents[] = { + "clk3686400", +}; - if (clk) { - WARN_ON(clk->enabled == 0); - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) - clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } -} -EXPORT_SYMBOL(clk_disable); +static const struct clk_init_data clk_mpll_init_data __initconst = { + .name = "mpll", + .ops = &clk_mpll_ops, + .parent_names = clk_mpll_parents, + .num_parents = ARRAY_SIZE(clk_mpll_parents), + .flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL, +}; -unsigned long clk_get_rate(struct clk *clk) +int __init sa11xx_clk_init(void) { - if (clk && clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - return 0; -} -EXPORT_SYMBOL(clk_get_rate); + struct clk_hw *hw; + int ret; -const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; + hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768); + if (IS_ERR(hw)) + return PTR_ERR(hw); -const struct clkops clk_cpu_ops = { - .enable = clk_cpu_enable, - .disable = clk_cpu_disable, - .get_rate = clk_cpu_get_rate, -}; + clk_hw_register_clkdev(hw, NULL, "sa1100-rtc"); -static DEFINE_CLK(gpio27, &clk_gpio27_ops); + hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400); + if (IS_ERR(hw)) + return PTR_ERR(hw); -static DEFINE_CLK(cpu, &clk_cpu_ops); + clk_hw_register_clkdev(hw, "OSTIMER0", NULL); -static unsigned long clk_36864_get_rate(struct clk *clk) -{ - return 3686400; -} + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + hw->init = &clk_mpll_init_data; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + return ret; + } -static struct clkops clk_36864_ops = { - .enable = clk_cpu_enable, - .disable = clk_cpu_disable, - .get_rate = clk_36864_get_rate, -}; + clk_hw_register_clkdev(hw, NULL, "sa11x0-fb"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1"); + clk_hw_register_clkdev(hw, NULL, "1800"); + + hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents, + ARRAY_SIZE(clk_tucr_parents), 0, + (void __iomem *)&TUCR, FShft(TUCR_TSEL), + FAlnMsk(TUCR_TSEL), 0, &tucr_lock); + clk_set_rate(hw->clk, 3686400); + + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + hw->init = &clk_gpio27_init_data; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + return ret; + } -static DEFINE_CLK(36864, &clk_36864_ops); - -static struct clk_lookup sa11xx_clkregs[] = { - CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27), - CLKDEV_INIT("sa1100-rtc", NULL, NULL), - CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia.0", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia.1", NULL, &clk_cpu), - /* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */ - CLKDEV_INIT("1800", NULL, &clk_cpu), - CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864), -}; + clk_hw_register_clkdev(hw, NULL, "sa1111.0"); -int __init sa11xx_clk_init(void) -{ - clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); return 0; } -- cgit v1.2.1