From a8135fcfd0431eda3653c7069e7aefc8674fdfbe Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Sun, 15 Jul 2007 20:12:23 +0100 Subject: [ARM] 4476/1: EM7210/SS4000E support This patch adds the basic support for the em7210 board. It is similar to the iq31244 board and can be found on Intel "Baxter Creek" ss4000e nas. Signed-off-by: Arnaud Patard Signed-off-by: Russell King --- arch/arm/mach-iop32x/Kconfig | 7 ++ arch/arm/mach-iop32x/Makefile | 1 + arch/arm/mach-iop32x/em7210.c | 202 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-iop32x/irq.c | 3 +- 4 files changed, 212 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-iop32x/em7210.c (limited to 'arch') diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig index 9bb02b6d7ae1..dbe07c9472ed 100644 --- a/arch/arm/mach-iop32x/Kconfig +++ b/arch/arm/mach-iop32x/Kconfig @@ -42,6 +42,13 @@ config IOP3XX_ATU Say N if the IOP is an add in card, the host system owns the PCI bus in this case. +config MACH_EM7210 + bool "Enable support for the Lanner EM7210" + help + Say Y here if you want to run your kernel on the Lanner EM7210 + board. Say also Y here if you have a SS4000e Baxter Creek NAS + appliance." + endmenu endif diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile index 7b05b37e1f94..cfdf8a137c2b 100644 --- a/arch/arm/mach-iop32x/Makefile +++ b/arch/arm/mach-iop32x/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_MACH_GLANTANK) += glantank.o obj-$(CONFIG_ARCH_IQ80321) += iq80321.o obj-$(CONFIG_ARCH_IQ31244) += iq31244.o obj-$(CONFIG_MACH_N2100) += n2100.o +obj-$(CONFIG_MACH_EM7210) += em7210.o diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c new file mode 100644 index 000000000000..f0362053fdcc --- /dev/null +++ b/arch/arm/mach-iop32x/em7210.c @@ -0,0 +1,202 @@ +/* + * arch/arm/mach-iop32x/em7210.c + * + * Board support code for the Lanner EM7210 platforms. + * + * Based on arch/arm/mach-iop32x/iq31244.c file. + * + * Copyright (C) 2007 Arnaud Patard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void __init em7210_timer_init(void) +{ + /* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */ + /* 33.333 MHz crystal. */ + iop_init_time(200000000); +} + +static struct sys_timer em7210_timer = { + .init = em7210_timer_init, + .offset = iop_gettimeoffset, +}; + + +/* + * EM7210 I/O + */ +static struct map_desc em7210_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE, + }, +}; + +void __init em7210_map_io(void) +{ + iop3xx_map_io(); + iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc)); +} + + +/* + * EM7210 PCI + */ +#define INTA IRQ_IOP32X_XINT0 +#define INTB IRQ_IOP32X_XINT1 +#define INTC IRQ_IOP32X_XINT2 +#define INTD IRQ_IOP32X_XINT3 + +static int __init +em7210_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {INTB, INTB, INTB, INTB}, /* console / uart */ + {INTA, INTA, INTA, INTA}, /* 1st 82541 */ + {INTD, INTD, INTD, INTD}, /* 2nd 82541 */ + {INTC, INTC, INTC, INTC}, /* GD31244 */ + {INTD, INTA, INTA, INTA}, /* mini-PCI */ + {INTD, INTC, INTA, INTA}, /* NEC USB */ + }; + + if (pin < 1 || pin > 4) + return -1; + + return pci_irq_table[slot % 6][pin - 1]; +} + +static struct hw_pci em7210_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = em7210_pci_map_irq, +}; + +static int __init em7210_pci_init(void) +{ + if (machine_is_em7210()) + pci_common_init(&em7210_pci); + + return 0; +} + +subsys_initcall(em7210_pci_init); + + +/* + * EM7210 Flash + */ +static struct physmap_flash_data em7210_flash_data = { + .width = 2, +}; + +static struct resource em7210_flash_resource = { + .start = 0xf0000000, + .end = 0xf1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device em7210_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &em7210_flash_data, + }, + .num_resources = 1, + .resource = &em7210_flash_resource, +}; + + +/* + * EM7210 UART + * The physical address of the serial port is 0xfe800000, + * so it can be used for physical and virtual address. + */ +static struct plat_serial8250_port em7210_serial_port[] = { + { + .mapbase = IQ31244_UART, + .membase = (char *)IQ31244_UART, + .irq = IRQ_IOP32X_XINT1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource em7210_uart_resource = { + .start = IQ31244_UART, + .end = IQ31244_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device em7210_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = em7210_serial_port, + }, + .num_resources = 1, + .resource = &em7210_uart_resource, +}; + +void em7210_power_off(void) +{ + *IOP3XX_GPOE &= 0xfe; + *IOP3XX_GPOD |= 0x01; +} + +static void __init em7210_init_machine(void) +{ + platform_device_register(&em7210_serial_device); + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&em7210_flash_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); + + + pm_power_off = em7210_power_off; +} + +MACHINE_START(EM7210, "Lanner EM7210") + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = em7210_map_io, + .init_irq = iop32x_init_irq, + .timer = &em7210_timer, + .init_machine = em7210_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index c971171c2905..55cf0162e8c1 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -63,7 +63,8 @@ void __init iop32x_init_irq(void) if (machine_is_glantank() || machine_is_iq80321() || machine_is_iq31244() || - machine_is_n2100()) + machine_is_n2100() || + machine_is_em7210()) *IOP3XX_PCIIRSR = 0x0f; for (i = 0; i < NR_IRQS; i++) { -- cgit v1.2.1 From 70c14ff0e9f5e1f5456587b827620e636ba70a09 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 20 Jul 2007 02:07:26 +0100 Subject: [ARM] 4495/1: iop: combined watchdog timer driver for iop3xx and iop13xx In order for this driver to be shared across the iop architectures the iop3xx and iop13xx header files are modified to present a common interface for the iop_wdt driver. Details: * iop13xx supports disabling the timer while iop3xx does not. This requires a few 'compatibility' definitions in include/asm-arm/hardware/iop3xx.h to preclude adding #ifdef CONFIG_ARCH_IOP13XX blocks to the driver code. * The heartbeat interval is derived from the internal bus clock rate, so this this patch also exports the tick rate to the iop_wdt driver. Cc: Curt Bruns Cc: Peter Milne Signed-off-by: Dan Williams Acked-by: Wim Van Sebroeck Signed-off-by: Russell King --- arch/arm/plat-iop/time.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 100d57ad98ed..ba3d21d8fba3 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -78,6 +78,13 @@ static struct irqaction iop_timer_irq = { .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, }; +static unsigned long iop_tick_rate; +unsigned long get_iop_tick_rate(void) +{ + return iop_tick_rate; +} +EXPORT_SYMBOL(get_iop_tick_rate); + void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; @@ -85,6 +92,7 @@ void __init iop_init_time(unsigned long tick_rate) ticks_per_jiffy = (tick_rate + HZ/2) / HZ; ticks_per_usec = tick_rate / 1000000; next_jiffy_time = 0xffffffff; + iop_tick_rate = tick_rate; timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED | IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1; -- cgit v1.2.1 From 228adef16d6e7b7725ef6b9ba760810d5966afa5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Jul 2007 09:37:10 +0100 Subject: [ARM] vfp: make fpexc bit names less verbose Use the fpexc abbreviated names instead of long verbose names for fpexc bits. Signed-off-by: Russell King --- arch/arm/vfp/vfphw.S | 12 ++++++------ arch/arm/vfp/vfpmodule.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index d4b7b229631d..0ac022f800a1 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -74,14 +74,14 @@ vfp_support_entry: VFPFMRX r1, FPEXC @ Is the VFP enabled? DBGSTR1 "fpexc %08x", r1 - tst r1, #FPEXC_ENABLE + tst r1, #FPEXC_EN bne look_for_VFP_exceptions @ VFP is already enabled DBGSTR1 "enable %x", r10 ldr r3, last_VFP_context_address - orr r1, r1, #FPEXC_ENABLE @ user FPEXC has the enable bit set + orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer - bic r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled + bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled cmp r4, r10 beq check_for_exception @ we are returning to the same @ process, so the registers are @@ -124,7 +124,7 @@ no_old_VFP_process: VFPFMXR FPSCR, r5 @ restore status check_for_exception: - tst r1, #FPEXC_EXCEPTION + tst r1, #FPEXC_EX bne process_exception @ might as well handle the pending @ exception before retrying branch @ out before setting an FPEXC that @@ -136,10 +136,10 @@ check_for_exception: look_for_VFP_exceptions: - tst r1, #FPEXC_EXCEPTION + tst r1, #FPEXC_EX bne process_exception VFPFMRX r5, FPSCR - tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EXCEPTION ! + tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX ! bne process_exception @ Fall into hand on to next handler - appropriate coproc instr diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 1106b5f9cf19..04ddab2bd876 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -53,7 +53,7 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * case the thread migrates to a different CPU. The * restoring is done lazily. */ - if ((fpexc & FPEXC_ENABLE) && last_VFP_context[cpu]) { + if ((fpexc & FPEXC_EN) && last_VFP_context[cpu]) { vfp_save_state(last_VFP_context[cpu], fpexc); last_VFP_context[cpu]->hard.cpu = cpu; } @@ -70,7 +70,7 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * Always disable VFP so we can lazily save/restore the * old state. */ - fmxr(FPEXC, fpexc & ~FPEXC_ENABLE); + fmxr(FPEXC, fpexc & ~FPEXC_EN); return NOTIFY_DONE; } @@ -81,13 +81,13 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) */ memset(vfp, 0, sizeof(union vfp_state)); - vfp->hard.fpexc = FPEXC_ENABLE; + vfp->hard.fpexc = FPEXC_EN; vfp->hard.fpscr = FPSCR_ROUND_NEAREST; /* * Disable VFP to ensure we initialise it first. */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); } /* flush and release case: Per-thread VFP cleanup. */ @@ -229,7 +229,7 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) /* * Enable access to the VFP so we can handle the bounce. */ - fmxr(FPEXC, fpexc & ~(FPEXC_EXCEPTION|FPEXC_INV|FPEXC_UFC|FPEXC_IOC)); + fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_INV|FPEXC_UFC|FPEXC_IOC)); orig_fpscr = fpscr = fmrx(FPSCR); @@ -248,7 +248,7 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) /* * Modify fpscr to indicate the number of iterations remaining */ - if (fpexc & FPEXC_EXCEPTION) { + if (fpexc & FPEXC_EX) { u32 len; len = fpexc + (1 << FPEXC_LENGTH_BIT); -- cgit v1.2.1 From c06911c00b2af93e498ba45200ad903929e71529 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 16 Jul 2007 11:35:40 +0100 Subject: [ARM] 4478/1: AT91: Convert AT91RM9200 to use atmel_spi driver Convert the AT91RM9200 platform-setup code to use the new atmel_spi driver (and manually-driven chip-selects), instead of the legacy AT91-only SPI stack. The AT91SAM9 processors are already using the atmel_spi driver. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200_devices.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 70599bcf451c..0417c165d50d 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -477,7 +477,7 @@ void __init at91_add_device_i2c(void) {} * SPI * -------------------------------------------------------------------- */ -#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) static u64 spi_dmamask = 0xffffffffUL; static struct resource spi_resources[] = { @@ -494,7 +494,7 @@ static struct resource spi_resources[] = { }; static struct platform_device at91rm9200_spi_device = { - .name = "at91_spi", + .name = "atmel_spi", .id = 0, .dev = { .dma_mask = &spi_dmamask, @@ -522,18 +522,14 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; -#ifdef CONFIG_SPI_AT91_MANUAL_CS + /* enable chip-select pin */ at91_set_gpio_output(cs_pin, 1); -#else - at91_set_A_periph(cs_pin, 0); -#endif /* pass chip-select pin to driver */ devices[i].controller_data = (void *) cs_pin; } spi_register_board_info(devices, nr_devices); - at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi"); platform_device_register(&at91rm9200_spi_device); } #else -- cgit v1.2.1 From 3be20cad15107adc423ac812ac7b3330ca195c74 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Jul 2007 12:21:37 +0100 Subject: [ARM] ks8695: no need to include linux/ptrace.h arch/arm/mach-ks8695/irq.c doesn't need to include linux/ptrace.h so remove it. Signed-off-by: Russell King --- arch/arm/mach-ks8695/irq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 2407bba00547..4c3ab43e1046 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include -- cgit v1.2.1 From 5c9b9123b35e28dd7cb3012f3f8d4ea13a30631c Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Sat, 14 Jul 2007 11:15:05 +0200 Subject: [ARM] ixp4xx: fix IRQ GPIO direction configuration for GPIOs >= 8 I believe that the following patch is necessary to properly configure GPIO line configuration for IRQ's which are mapped to a GPIO line >= 8 (without this patch the wrong GPIO is configured as an input.) Signed-off-by: Tim Harvey Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 8112f726ffa0..4c54a86eda3a 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -188,7 +188,7 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); /* Configure the line as an input */ - gpio_line_config(line, IXP4XX_GPIO_IN); + gpio_line_config(irq2gpio[irq], IXP4XX_GPIO_IN); return 0; } -- cgit v1.2.1 From e09d02e123fb6944af23a0697369ebcfc15acf73 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 17 Jul 2007 10:45:58 +0100 Subject: [ARM] 4480/1: pxa: change the pxa device naming scheme 1. for common devices across all the pxa variants, the names are changed to be: "pxa_device_xxx" 2. for pxa25x or pxa27x specific devices, the names are changed to be: "pxa25x_device_xxx", or "pxa27x_device_xxx" Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/devices.h | 22 +++++++++++----------- arch/arm/mach-pxa/generic.c | 32 ++++++++++++++++---------------- arch/arm/mach-pxa/pxa25x.c | 22 +++++++++++----------- arch/arm/mach-pxa/pxa27x.c | 30 +++++++++++++++--------------- 4 files changed, 53 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 9a6faff8e5a7..636fdb1c049c 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -1,11 +1,11 @@ -extern struct platform_device pxamci_device; -extern struct platform_device pxaudc_device; -extern struct platform_device pxafb_device; -extern struct platform_device ffuart_device; -extern struct platform_device btuart_device; -extern struct platform_device stuart_device; -extern struct platform_device hwuart_device; -extern struct platform_device pxai2c_device; -extern struct platform_device pxai2s_device; -extern struct platform_device pxaficp_device; -extern struct platform_device pxartc_device; +extern struct platform_device pxa_device_mci; +extern struct platform_device pxa_device_udc; +extern struct platform_device pxa_device_fb; +extern struct platform_device pxa_device_ffuart; +extern struct platform_device pxa_device_btuart; +extern struct platform_device pxa_device_stuart; +extern struct platform_device pxa_device_hwuart; +extern struct platform_device pxa_device_i2c; +extern struct platform_device pxa_device_i2s; +extern struct platform_device pxa_device_ficp; +extern struct platform_device pxa_device_rtc; diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 296539b6359c..5510f6fdce55 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -243,7 +243,7 @@ static struct resource pxamci_resources[] = { static u64 pxamci_dmamask = 0xffffffffUL; -struct platform_device pxamci_device = { +struct platform_device pxa_device_mci = { .name = "pxa2xx-mci", .id = -1, .dev = { @@ -256,7 +256,7 @@ struct platform_device pxamci_device = { void __init pxa_set_mci_info(struct pxamci_platform_data *info) { - pxamci_device.dev.platform_data = info; + pxa_device_mci.dev.platform_data = info; } @@ -282,7 +282,7 @@ static struct resource pxa2xx_udc_resources[] = { static u64 udc_dma_mask = ~(u32)0; -struct platform_device pxaudc_device = { +struct platform_device pxa_device_udc = { .name = "pxa2xx-udc", .id = -1, .resource = pxa2xx_udc_resources, @@ -308,7 +308,7 @@ static struct resource pxafb_resources[] = { static u64 fb_dma_mask = ~(u64)0; -struct platform_device pxafb_device = { +struct platform_device pxa_device_fb = { .name = "pxa2xx-fb", .id = -1, .dev = { @@ -321,27 +321,27 @@ struct platform_device pxafb_device = { void __init set_pxa_fb_info(struct pxafb_mach_info *info) { - pxafb_device.dev.platform_data = info; + pxa_device_fb.dev.platform_data = info; } void __init set_pxa_fb_parent(struct device *parent_dev) { - pxafb_device.dev.parent = parent_dev; + pxa_device_fb.dev.parent = parent_dev; } -struct platform_device ffuart_device = { +struct platform_device pxa_device_ffuart= { .name = "pxa2xx-uart", .id = 0, }; -struct platform_device btuart_device = { +struct platform_device pxa_device_btuart = { .name = "pxa2xx-uart", .id = 1, }; -struct platform_device stuart_device = { +struct platform_device pxa_device_stuart = { .name = "pxa2xx-uart", .id = 2, }; -struct platform_device hwuart_device = { +struct platform_device pxa_device_hwuart = { .name = "pxa2xx-uart", .id = 3, }; @@ -358,7 +358,7 @@ static struct resource pxai2c_resources[] = { }, }; -struct platform_device pxai2c_device = { +struct platform_device pxa_device_i2c = { .name = "pxa2xx-i2c", .id = 0, .resource = pxai2c_resources, @@ -367,7 +367,7 @@ struct platform_device pxai2c_device = { void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) { - pxai2c_device.dev.platform_data = info; + pxa_device_i2c.dev.platform_data = info; } static struct resource pxai2s_resources[] = { @@ -382,7 +382,7 @@ static struct resource pxai2s_resources[] = { }, }; -struct platform_device pxai2s_device = { +struct platform_device pxa_device_i2s = { .name = "pxa2xx-i2s", .id = -1, .resource = pxai2s_resources, @@ -391,7 +391,7 @@ struct platform_device pxai2s_device = { static u64 pxaficp_dmamask = ~(u32)0; -struct platform_device pxaficp_device = { +struct platform_device pxa_device_ficp = { .name = "pxa2xx-ir", .id = -1, .dev = { @@ -402,10 +402,10 @@ struct platform_device pxaficp_device = { void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) { - pxaficp_device.dev.platform_data = info; + pxa_device_ficp.dev.platform_data = info; } -struct platform_device pxartc_device = { +struct platform_device pxa_device_rtc = { .name = "sa1100-rtc", .id = -1, }; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index f36ca448338e..9d9422e2f75c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -139,16 +139,16 @@ void __init pxa25x_init_irq(void) } static struct platform_device *pxa25x_devices[] __initdata = { - &pxamci_device, - &pxaudc_device, - &pxafb_device, - &ffuart_device, - &btuart_device, - &stuart_device, - &pxai2c_device, - &pxai2s_device, - &pxaficp_device, - &pxartc_device, + &pxa_device_mci, + &pxa_device_udc, + &pxa_device_fb, + &pxa_device_ffuart, + &pxa_device_btuart, + &pxa_device_stuart, + &pxa_device_i2c, + &pxa_device_i2s, + &pxa_device_ficp, + &pxa_device_rtc, }; static int __init pxa25x_init(void) @@ -166,7 +166,7 @@ static int __init pxa25x_init(void) } /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ if (cpu_is_pxa25x()) - ret = platform_device_register(&hwuart_device); + ret = platform_device_register(&pxa_device_hwuart); return ret; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aa5bb02c897b..c85f0b01c326 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -185,7 +185,7 @@ static struct resource pxa27x_ohci_resources[] = { }, }; -static struct platform_device pxaohci_device = { +static struct platform_device pxa27x_device_ohci = { .name = "pxa27x-ohci", .id = -1, .dev = { @@ -198,7 +198,7 @@ static struct platform_device pxaohci_device = { void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) { - pxaohci_device.dev.platform_data = info; + pxa27x_device_ohci.dev.platform_data = info; } static struct resource i2c_power_resources[] = { @@ -213,7 +213,7 @@ static struct resource i2c_power_resources[] = { }, }; -static struct platform_device pxai2c_power_device = { +static struct platform_device pxa27x_device_i2c_power = { .name = "pxa2xx-i2c", .id = 1, .resource = i2c_power_resources, @@ -221,18 +221,18 @@ static struct platform_device pxai2c_power_device = { }; static struct platform_device *devices[] __initdata = { - &pxamci_device, - &pxaudc_device, - &pxafb_device, - &ffuart_device, - &btuart_device, - &stuart_device, - &pxai2c_device, - &pxai2c_power_device, - &pxai2s_device, - &pxaficp_device, - &pxartc_device, - &pxaohci_device, + &pxa_device_mci, + &pxa_device_udc, + &pxa_device_fb, + &pxa_device_ffuart, + &pxa_device_btuart, + &pxa_device_stuart, + &pxa_device_i2c, + &pxa_device_i2s, + &pxa_device_ficp, + &pxa_device_rtc, + &pxa27x_device_i2c_power, + &pxa27x_device_ohci, }; void __init pxa27x_init_irq(void) -- cgit v1.2.1 From 3f20246bb67594acae5a82a8b859f21579b0ff07 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:33:18 +0100 Subject: [ARM] 4482/1: ns9xxx: fix compilation for mach-type CC9P9360JS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I must have written the patch introducing support for this machine deep in the night... Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/Makefile | 1 + arch/arm/mach-ns9xxx/mach-cc9p9360js.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile index 53213a69f601..4476411b8140 100644 --- a/arch/arm/mach-ns9xxx/Makefile +++ b/arch/arm/mach-ns9xxx/Makefile @@ -1,6 +1,7 @@ obj-y := irq.o time.o generic.o obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o +obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c index d09d5fa5620a..85c8b41105c9 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c @@ -20,7 +20,7 @@ static void __init mach_cc9p9360js_init_machine(void) board_jscc9p9360_init_machine(); } -MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") +MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") .map_io = ns9xxx_map_io, .init_irq = ns9xxx_init_irq, .init_machine = mach_cc9p9360js_init_machine, -- cgit v1.2.1 From aa4db079f7c4cf389fc25f78b943589b4a6401de Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:34:28 +0100 Subject: [ARM] 4483/1: ns9xxx: fix three sparse warnings: symbol 'xyz' was not declared. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit make ns9xxx_ack_irq_functions static and add one include to get declarations for ns9xxx_map_io and ns9xxx_init_machine. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/generic.c | 2 ++ arch/arm/mach-ns9xxx/irq.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c index 83e2b6532b22..d742c921e34d 100644 --- a/arch/arm/mach-ns9xxx/generic.c +++ b/arch/arm/mach-ns9xxx/generic.c @@ -18,6 +18,8 @@ #include #include +#include "generic.h" + static struct map_desc standard_io_desc[] __initdata = { { /* BBus */ .virtual = io_p2v(0x90000000), diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index 83d92724a971..cd8f8365b62e 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -28,7 +28,7 @@ static void ns9xxx_ack_irq_timer(unsigned int irq) SYS_TC(irq - IRQ_TIMER0) = tc; } -void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = { +static void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = { [IRQ_TIMER0] = ns9xxx_ack_irq_timer, [IRQ_TIMER1] = ns9xxx_ack_irq_timer, [IRQ_TIMER2] = ns9xxx_ack_irq_timer, -- cgit v1.2.1 From cebfaf5f1c4dcf9456463c8411ae869f3c03619f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:35:34 +0100 Subject: [ARM] 4485/1: ns9xxx: pass the correct irq number to the interrupt handlers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 25289884a607..267c2a1e1188 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -77,7 +77,7 @@ static void a9m9750dev_fpga_demux_handler(unsigned int irq, desc = irq_desc + FPGA_IRQ(irqno); - desc_handle_irq(irqno, desc); + desc_handle_irq(FPGA_IRQ(irqno), desc); } } -- cgit v1.2.1 From f4ae6413f4d4889c8bf3fb90939d967ced65ece7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:35:52 +0100 Subject: [ARM] 4486/1: ns9xxx: fix a typo in the register definitions. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed all users. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 267c2a1e1188..6eee8084b613 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -178,7 +178,7 @@ void __init board_a9m9750dev_init_machine(void) /* setup static CS0: memory configuration */ reg = MEM_SMC(0); - REGSET(reg, MEM_SMC, WSMC, OFF); + REGSET(reg, MEM_SMC, PSMC, OFF); REGSET(reg, MEM_SMC, BSMC, OFF); REGSET(reg, MEM_SMC, EW, OFF); REGSET(reg, MEM_SMC, PB, 1); -- cgit v1.2.1 From 3945a567d0c1d6721994a88f58f028c27d8249d2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:36:09 +0100 Subject: [ARM] 4487/1: ns9xxx: complete definition of GPIO related registers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I changed the naming to be more obvious---unfortunately the HRM doesn't specify these. Moreover the numbering is changed to be zero indexed as this is more natural. Adjust all callers. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 6eee8084b613..925048e7adfe 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -91,7 +91,7 @@ void __init board_a9m9750dev_init_irq(void) * use GPIO 11, because GPIO 32 is used for the LCD */ /* XXX: proper GPIO handling */ - BBU_GC(2) &= ~0x2000; + BBU_GCONFb1(1) &= ~0x2000; for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { set_irq_chip(i, &a9m9750dev_fpga_chip); @@ -196,4 +196,3 @@ void __init board_a9m9750dev_init_machine(void) platform_add_devices(board_a9m9750dev_devices, ARRAY_SIZE(board_a9m9750dev_devices)); } - -- cgit v1.2.1 From 26c671c6b7c02bc9f9c42331e6ecbeccdf67164c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 19 Jul 2007 22:13:05 +0100 Subject: [ARM] 4493/1: ns9xxx: disable a non-reloading timer before ack'ing its irq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The HRM states that is must be done this way ... Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/irq.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index cd8f8365b62e..b8c7b00522e6 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -21,6 +21,15 @@ static void ns9xxx_ack_irq_timer(unsigned int irq) { u32 tc = SYS_TC(irq - IRQ_TIMER0); + /* + * If the timer is programmed to halt on terminal count, the + * timer must be disabled before clearing the interrupt. + */ + if (REGGET(tc, SYS_TCx, REN) == 0) { + REGSET(tc, SYS_TCx, TEN, DIS); + SYS_TC(irq - IRQ_TIMER0) = tc; + } + REGSET(tc, SYS_TCx, INTC, SET); SYS_TC(irq - IRQ_TIMER0) = tc; -- cgit v1.2.1 From 711be5ccfe9a02ba560aa918a008c31ea4760163 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 18 Jul 2007 11:38:45 +0100 Subject: [ARM] 4488/1: pxa: move pxa25x/pxa27x specific code out of pm.c 1. introduce a structure pxa_cpu_pm_fns for pxa25x/pxa27x specific operations as follows: struct pxa_cpu_pm_fns { int save_size; void (*save)(unsigned long *); void (*restore)(unsigned long *); int (*valid)(suspend_state_t state); void (*enter)(suspend_state_t state); } 2. processor specific registers saving and restoring are performed by calling the corresponding (*save) and (*restore) 3. pxa_cpu_pm_fns->save_size should be initialized to the required size for processor specific registers saving, the allocated memory address will be passed to (*save) and (*restore) memory allocation happens early in pxa_pm_init(), and save_size should be assigned prior to this (which is usually true, since pxa_pm_init() happens in device_initcall() 4. there're some redundancies for those SLEEP_SAVE_XXX and related macros, will be fixed later, one way possible is for the system devices to handle the specific registers saving and restoring Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/pm.c | 169 ++++++++++++--------------------------------- arch/arm/mach-pxa/pxa25x.c | 84 ++++++++++++++++++++-- arch/arm/mach-pxa/pxa27x.c | 117 +++++++++++++++++++++++++++++-- 3 files changed, 234 insertions(+), 136 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index e66dbc26add1..b59a81a8e7d3 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -24,61 +24,13 @@ #include #include - -/* - * Debug macros - */ -#undef DEBUG - -#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x -#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] - -#define RESTORE_GPLEVEL(n) do { \ - GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \ - GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \ -} while (0) - -/* - * List of global PXA peripheral registers to preserve. - * More ones like CP and general purpose register values are preserved - * with the stack pointer in sleep.S. - */ -enum { SLEEP_SAVE_START = 0, - - SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3, - SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3, - SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3, - SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3, - SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, - - SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, - SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, - SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, - SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U, - - SLEEP_SAVE_PSTR, - - SLEEP_SAVE_ICMR, - SLEEP_SAVE_CKEN, - -#ifdef CONFIG_PXA27x - SLEEP_SAVE_MDREFR, - SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, - SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, -#endif - - SLEEP_SAVE_CKSUM, - - SLEEP_SAVE_SIZE -}; - +struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; +static unsigned long *sleep_save; int pxa_pm_enter(suspend_state_t state) { - unsigned long sleep_save[SLEEP_SAVE_SIZE]; - unsigned long checksum = 0; + unsigned long sleep_save_checksum = 0, checksum = 0; int i; - extern void pxa_cpu_pm_enter(suspend_state_t state); #ifdef CONFIG_IWMMXT /* force any iWMMXt context to ram **/ @@ -86,100 +38,35 @@ int pxa_pm_enter(suspend_state_t state) iwmmxt_task_disable(NULL); #endif - SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); - SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); - SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); - SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); - SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); - - SAVE(GAFR0_L); SAVE(GAFR0_U); - SAVE(GAFR1_L); SAVE(GAFR1_U); - SAVE(GAFR2_L); SAVE(GAFR2_U); - -#ifdef CONFIG_PXA27x - SAVE(MDREFR); - SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3); - SAVE(GAFR3_L); SAVE(GAFR3_U); - SAVE(PWER); SAVE(PCFR); SAVE(PRER); - SAVE(PFER); SAVE(PKWR); -#endif - - SAVE(ICMR); - ICMR = 0; - - SAVE(CKEN); - SAVE(PSTR); - - /* Note: wake up source are set up in each machine specific files */ - - /* clear GPIO transition detect bits */ - GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; -#ifdef CONFIG_PXA27x - GEDR3 = GEDR3; -#endif + pxa_cpu_pm_fns->save(sleep_save); /* Clear sleep reset status */ RCSR = RCSR_SMR; /* before sleeping, calculate and save a checksum */ - for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) - checksum += sleep_save[i]; - sleep_save[SLEEP_SAVE_CKSUM] = checksum; + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + sleep_save_checksum += sleep_save[i]; /* *** go zzz *** */ - pxa_cpu_pm_enter(state); - + pxa_cpu_pm_fns->enter(state); cpu_init(); /* after sleeping, validate the checksum */ - checksum = 0; - for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) checksum += sleep_save[i]; /* if invalid, display message and wait for a hardware reset */ - if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) { + if (checksum != sleep_save_checksum) { #ifdef CONFIG_ARCH_LUBBOCK LUB_HEXLED = 0xbadbadc5; #endif while (1) - pxa_cpu_pm_enter(state); + pxa_cpu_pm_fns->enter(state); } - /* ensure not to come back here if it wasn't intended */ - PSPR = 0; - - /* restore registers */ - RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); - RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); - RESTORE(GAFR0_L); RESTORE(GAFR0_U); - RESTORE(GAFR1_L); RESTORE(GAFR1_U); - RESTORE(GAFR2_L); RESTORE(GAFR2_U); - RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); - RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); - RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); - -#ifdef CONFIG_PXA27x - RESTORE(MDREFR); - RESTORE_GPLEVEL(3); RESTORE(GPDR3); - RESTORE(GAFR3_L); RESTORE(GAFR3_U); - RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); - RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); - RESTORE(PFER); RESTORE(PKWR); -#endif - - PSSR = PSSR_RDH | PSSR_PH; - - RESTORE(CKEN); - - ICLR = 0; - ICCR = 1; - RESTORE(ICMR); + pxa_cpu_pm_fns->restore(sleep_save); - RESTORE(PSTR); - -#ifdef DEBUG - printk(KERN_DEBUG "*** made it back from resume\n"); -#endif + pr_debug("*** made it back from resume\n"); return 0; } @@ -190,3 +77,35 @@ unsigned long sleep_phys_sp(void *sp) { return virt_to_phys(sp); } + +static int pxa_pm_valid(suspend_state_t state) +{ + if (pxa_cpu_pm_fns) + return pxa_cpu_pm_fns->valid(state); + + return -EINVAL; +} + +static struct pm_ops pxa_pm_ops = { + .valid = pxa_pm_valid, + .enter = pxa_pm_enter, +}; + +static int __init pxa_pm_init(void) +{ + if (!pxa_cpu_pm_fns) { + printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n"); + return -EINVAL; + } + + sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL); + if (!sleep_save) { + printk(KERN_ERR "failed to alloc memory for pm save\n"); + return -ENOMEM; + } + + pm_set_ops(&pxa_pm_ops); + return 0; +} + +device_initcall(pxa_pm_init); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 9d9422e2f75c..1ec4bf1ff249 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -110,7 +110,75 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz); #ifdef CONFIG_PM -void pxa_cpu_pm_enter(suspend_state_t state) +#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x +#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] + +#define RESTORE_GPLEVEL(n) do { \ + GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \ + GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \ +} while (0) + +/* + * List of global PXA peripheral registers to preserve. + * More ones like CP and general purpose register values are preserved + * with the stack pointer in sleep.S. + */ +enum { SLEEP_SAVE_START = 0, + + SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, + SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, + SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, + SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, + SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, + + SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, + SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, + SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, + + SLEEP_SAVE_PSTR, + + SLEEP_SAVE_ICMR, + SLEEP_SAVE_CKEN, + + SLEEP_SAVE_SIZE +}; + + +static void pxa25x_cpu_pm_save(unsigned long *sleep_save) +{ + SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); + SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); + SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); + SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); + SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); + + SAVE(GAFR0_L); SAVE(GAFR0_U); + SAVE(GAFR1_L); SAVE(GAFR1_U); + SAVE(GAFR2_L); SAVE(GAFR2_U); + + SAVE(ICMR); + SAVE(CKEN); + SAVE(PSTR); +} + +static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) +{ + /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); + RESTORE(GAFR0_L); RESTORE(GAFR0_U); + RESTORE(GAFR1_L); RESTORE(GAFR1_U); + RESTORE(GAFR2_L); RESTORE(GAFR2_U); + RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); + RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); + RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); + + RESTORE(CKEN); + RESTORE(ICMR); + RESTORE(PSTR); +} + +static void pxa25x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); @@ -126,10 +194,18 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } -static struct pm_ops pxa25x_pm_ops = { - .enter = pxa_pm_enter, +static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = { + .save_size = SLEEP_SAVE_SIZE, .valid = pm_valid_only_mem, + .save = pxa25x_cpu_pm_save, + .restore = pxa25x_cpu_pm_restore, + .enter = pxa25x_cpu_pm_enter, }; + +static void __init pxa25x_init_pm(void) +{ + pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns; +} #endif void __init pxa25x_init_irq(void) @@ -159,7 +235,7 @@ static int __init pxa25x_init(void) if ((ret = pxa_init_dma(16))) return ret; #ifdef CONFIG_PM - pm_set_ops(&pxa25x_pm_ops); + pxa25x_init_pm(); #endif ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c85f0b01c326..9240d37e23fa 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -126,14 +126,109 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz); #ifdef CONFIG_PM -void pxa_cpu_pm_enter(suspend_state_t state) +#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x +#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] + +#define RESTORE_GPLEVEL(n) do { \ + GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \ + GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \ +} while (0) + +/* + * List of global PXA peripheral registers to preserve. + * More ones like CP and general purpose register values are preserved + * with the stack pointer in sleep.S. + */ +enum { SLEEP_SAVE_START = 0, + + SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3, + SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3, + SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3, + SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3, + SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, + + SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, + SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, + SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, + SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U, + + SLEEP_SAVE_PSTR, + + SLEEP_SAVE_ICMR, + SLEEP_SAVE_CKEN, + + SLEEP_SAVE_MDREFR, + SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, + SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, + + SLEEP_SAVE_SIZE +}; + +void pxa27x_cpu_pm_save(unsigned long *sleep_save) +{ + SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); SAVE(GPLR3); + SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); SAVE(GPDR3); + SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); SAVE(GRER3); + SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); SAVE(GFER3); + SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3); + + SAVE(GAFR0_L); SAVE(GAFR0_U); + SAVE(GAFR1_L); SAVE(GAFR1_U); + SAVE(GAFR2_L); SAVE(GAFR2_U); + SAVE(GAFR3_L); SAVE(GAFR3_U); + + SAVE(MDREFR); + SAVE(PWER); SAVE(PCFR); SAVE(PRER); + SAVE(PFER); SAVE(PKWR); + + SAVE(ICMR); ICMR = 0; + SAVE(CKEN); + SAVE(PSTR); + + /* Clear GPIO transition detect bits */ + GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; GEDR3 = GEDR3; +} + +void pxa27x_cpu_pm_restore(unsigned long *sleep_save) +{ + /* ensure not to come back here if it wasn't intended */ + PSPR = 0; + + /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); + RESTORE_GPLEVEL(2); RESTORE_GPLEVEL(3); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GPDR3); + RESTORE(GAFR0_L); RESTORE(GAFR0_U); + RESTORE(GAFR1_L); RESTORE(GAFR1_U); + RESTORE(GAFR2_L); RESTORE(GAFR2_U); + RESTORE(GAFR3_L); RESTORE(GAFR3_U); + RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GRER3); + RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(GFER3); + RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3); + + RESTORE(MDREFR); + RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); + RESTORE(PFER); RESTORE(PKWR); + + PSSR = PSSR_RDH | PSSR_PH; + + RESTORE(CKEN); + + ICLR = 0; + ICCR = 1; + RESTORE(ICMR); + RESTORE(PSTR); +} + +void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); extern void pxa_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); if (state == PM_SUSPEND_STANDBY) - CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | (1 << CKEN_LCD) | (1 << CKEN_PWM0); + CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | + (1 << CKEN_LCD) | (1 << CKEN_PWM0); else CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER); @@ -155,15 +250,23 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } -static int pxa27x_pm_valid(suspend_state_t state) +static int pxa27x_cpu_pm_valid(suspend_state_t state) { return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; } -static struct pm_ops pxa27x_pm_ops = { - .enter = pxa_pm_enter, - .valid = pxa27x_pm_valid, +static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = { + .save_size = SLEEP_SAVE_SIZE, + .save = pxa27x_cpu_pm_save, + .restore = pxa27x_cpu_pm_restore, + .valid = pxa27x_cpu_pm_valid, + .enter = pxa27x_cpu_pm_enter, }; + +static void __init pxa27x_init_pm(void) +{ + pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns; +} #endif /* @@ -249,7 +352,7 @@ static int __init pxa27x_init(void) if ((ret = pxa_init_dma(32))) return ret; #ifdef CONFIG_PM - pm_set_ops(&pxa27x_pm_ops); + pxa27x_init_pm(); #endif ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } -- cgit v1.2.1 From b750a09385d7c464113ae8915e63541a163fbac8 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 18 Jul 2007 11:40:13 +0100 Subject: [ARM] 4489/1: pxa: split pxa_cpu_suspend to processor specific ones 1. split pxa_cpu_suspend to pxa25x_cpu_suspend and pxa27x_cpu_suspend and make pxa25x_cpu_pm_enter() and pxa27x_cpu_pm_enter() to invoke the corresponding _suspend functions, thus remove all those ugly #ifdef .. #endif out of sleep.S 2. move the declarations of those suspend functions to pm.h note: this is not a clean enough solution until all the pxa25x and pxa27x specific part is further removed out of sleep.S, sleep.S is supposed to contain generic code only Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa25x.c | 5 +- arch/arm/mach-pxa/pxa27x.c | 4 +- arch/arm/mach-pxa/sleep.S | 112 +++++++++++++++++++++++++++++---------------- 3 files changed, 75 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 1ec4bf1ff249..6dfcca72e90f 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -180,16 +180,13 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) static void pxa25x_cpu_pm_enter(suspend_state_t state) { - extern void pxa_cpu_suspend(unsigned int); - extern void pxa_cpu_resume(void); - CKEN = 0; switch (state) { case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(PWRMODE_SLEEP); + pxa25x_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9240d37e23fa..203371ab19db 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -223,8 +223,6 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save) void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); - extern void pxa_cpu_suspend(unsigned int); - extern void pxa_cpu_resume(void); if (state == PM_SUSPEND_STANDBY) CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | @@ -245,7 +243,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(PWRMODE_SLEEP); + pxa27x_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 15874b360e51..aff71fec618a 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -17,28 +17,12 @@ #include -#ifdef CONFIG_PXA27x // workaround for Errata 50 #define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 -#endif .text -/* - * pxa_cpu_suspend() - * - * Forces CPU into sleep state. - * - * r0 = value for PWRMODE M field for desired sleep state - */ - -ENTRY(pxa_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - +pxa_cpu_save_cp: @ get coprocessor registers mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r4, c15, c1, 0 @ CP access reg @@ -54,12 +38,36 @@ ENTRY(pxa_cpu_suspend) mov r10, sp stmfd sp!, {r3 - r10} - mov r5, r0 @ save sleep mode + mov pc, lr + +pxa_cpu_save_sp: @ preserve phys address of stack mov r0, sp + mov r2, lr bl sleep_phys_sp ldr r1, =sleep_save_sp str r0, [r1] + mov pc, r2 + +/* + * pxa27x_cpu_suspend() + * + * Forces CPU into sleep state. + * + * r0 = value for PWRMODE M field for desired sleep state + */ + +ENTRY(pxa27x_cpu_suspend) + +#ifndef CONFIG_IWMMXT + mra r2, r3, acc0 +#endif + stmfd sp!, {r2 - r12, lr} @ save registers on stack + + bl pxa_cpu_save_cp + + mov r5, r0 @ save sleep mode + bl pxa_cpu_save_sp @ clean data cache bl xscale_flush_kern_cache_all @@ -80,13 +88,55 @@ ENTRY(pxa_cpu_suspend) @ enable SDRAM self-refresh mode orr r5, r5, #MDREFR_SLFRSH -#ifdef CONFIG_PXA27x @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50) ldr r6, =MDREFR_KDIV orr r5, r5, r6 -#endif -#ifdef CONFIG_PXA25x + @ Intel PXA270 Specification Update notes problems sleeping + @ with core operating above 91 MHz + @ (see Errata 50, ...processor does not exit from sleep...) + + ldr r6, =CCCR + ldr r8, [r6] @ keep original value for resume + + ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value + mov r0, #0x2 @ prepare value for CLKCFG + + @ align execution to a cache line + b pxa_cpu_do_suspend + +/* + * pxa27x_cpu_suspend() + * + * Forces CPU into sleep state. + * + * r0 = value for PWRMODE M field for desired sleep state + */ + +ENTRY(pxa25x_cpu_suspend) + stmfd sp!, {r2 - r12, lr} @ save registers on stack + + bl pxa_cpu_save_cp + + mov r5, r0 @ save sleep mode + bl pxa_cpu_save_sp + + @ clean data cache + bl xscale_flush_kern_cache_all + + @ prepare value for sleep mode + mov r1, r5 @ sleep mode + + @ prepare pointer to physical address 0 (virtual mapping in generic.c) + mov r2, #UNCACHED_PHYS_0 + + @ prepare SDRAM refresh settings + ldr r4, =MDREFR + ldr r5, [r4] + + @ enable SDRAM self-refresh mode + orr r5, r5, #MDREFR_SLFRSH + @ Intel PXA255 Specification Update notes problems @ about suspending with PXBus operating above 133MHz @ (see Errata 31, GPIO output signals, ... unpredictable in sleep @@ -118,30 +168,15 @@ ENTRY(pxa_cpu_suspend) mov r0, #0 mcr p14, 0, r0, c6, c0, 0 orr r0, r0, #2 @ initiate change bit -#endif -#ifdef CONFIG_PXA27x - @ Intel PXA270 Specification Update notes problems sleeping - @ with core operating above 91 MHz - @ (see Errata 50, ...processor does not exit from sleep...) - - ldr r6, =CCCR - ldr r8, [r6] @ keep original value for resume - - ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value - mov r0, #0x2 @ prepare value for CLKCFG -#endif - - @ align execution to a cache line - b 1f + b pxa_cpu_do_suspend .ltorg .align 5 -1: +pxa_cpu_do_suspend: @ All needed values are now in registers. @ These last instructions should be in cache -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) @ initiate the frequency change... str r7, [r6] mcr p14, 0, r0, c6, c0, 0 @@ -155,7 +190,6 @@ ENTRY(pxa_cpu_suspend) mov r0, #42 10: subs r0, r0, #1 bne 10b -#endif @ Do not reorder... @ Intel PXA270 Specification Update notes problems performing -- cgit v1.2.1 From fe885fa2372b1d255974e71d5b7c51b1e9673835 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 18 Jul 2007 21:04:00 +0100 Subject: [ARM] 4491/1: em7210 rtc clock The commit d815461c7a73903d0a926b3cace6f69e144c54a3 in linus tree converts the rtc-rs5c372 driver to a "new style" i2c driver. Like commit c00593f6f816e5cfa6d193a2561ca77541f71424, this patch register the rtc i2c device for the em7210 board. Signed-off-by: Arnaud Patard Signed-off-by: Russell King --- arch/arm/mach-iop32x/em7210.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index f0362053fdcc..c947152f9a3c 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -44,6 +45,15 @@ static struct sys_timer em7210_timer = { .offset = iop_gettimeoffset, }; +/* + * EM7210 RTC + */ +static struct i2c_board_info __initdata em7210_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-rs5c372", 0x32), + .type = "rs5c372a", + }, +}; /* * EM7210 I/O @@ -187,6 +197,9 @@ static void __init em7210_init_machine(void) platform_device_register(&iop3xx_dma_0_channel); platform_device_register(&iop3xx_dma_1_channel); + i2c_register_board_info(0, em7210_i2c_devices, + ARRAY_SIZE(em7210_i2c_devices)); + pm_power_off = em7210_power_off; } -- cgit v1.2.1 From 3d50527bbf1b68e5206263ade414f0d966b00f74 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 18 Jul 2007 11:31:46 +0100 Subject: [ARM] 4475/2: EM-x270 board support Signed-off-by: Mike Rapoport Signed-off-by: Russell King --- arch/arm/configs/em_x270_defconfig | 1265 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/Kconfig | 4 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/em-x270.c | 354 ++++++++++ 4 files changed, 1624 insertions(+) create mode 100644 arch/arm/configs/em_x270_defconfig create mode 100644 arch/arm/mach-pxa/em-x270.c (limited to 'arch') diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig new file mode 100644 index 000000000000..6bea0901bdf0 --- /dev/null +++ b/arch/arm/configs/em_x270_defconfig @@ -0,0 +1,1265 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22 +# Mon Jul 9 15:18:20 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-em-x270" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_MACH_EM_X270=y +CONFIG_PXA27x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_APM_EMULATION=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_BCSP is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=12000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +# CONFIG_SMC911X is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=m +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=m + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5c0a10041cd1..5ebec6d88b51 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -37,6 +37,10 @@ config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" select PXA27x +config MACH_EM_X270 + bool "CompuLab EM-x270 platform" + select PXA27x + endchoice if PXA_SHARPSL diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 9093eb1c94eb..7d6ab5c59ab9 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o sp obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o obj-$(CONFIG_MACH_TOSA) += tosa.o +obj-$(CONFIG_MACH_EM_X270) += em-x270.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c new file mode 100644 index 000000000000..3d0ad5065ee5 --- /dev/null +++ b/arch/arm/mach-pxa/em-x270.c @@ -0,0 +1,354 @@ +/* + * Support for CompuLab EM-x270 platform + * + * Copyright (C) 2007 CompuLab, Ltd. + * Author: Mike Rapoport + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include +#include + +#include + +#include + +#include +#include +#include +#include +#include + +#include "generic.h" + +/* GPIO IRQ usage */ +#define EM_X270_MMC_PD (105) +#define EM_X270_ETHIRQ IRQ_GPIO(41) +#define EM_X270_MMC_IRQ IRQ_GPIO(13) + +static struct resource em_x270_dm9k_resource[] = { + [0] = { + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS2_PHYS + 8, + .end = PXA_CS2_PHYS + 8 + 0x3f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = EM_X270_ETHIRQ, + .end = EM_X270_ETHIRQ, + .flags = IORESOURCE_IRQ, + } +}; + +/* for the moment we limit ourselves to 32bit IO until some + * better IO routines can be written and tested + */ +static struct dm9000_plat_data em_x270_dm9k_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + +/* Ethernet device */ +static struct platform_device em_x270_dm9k = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(em_x270_dm9k_resource), + .resource = em_x270_dm9k_resource, + .dev = { + .platform_data = &em_x270_dm9k_platdata, + } +}; + +/* audio device */ +static struct platform_device em_x270_audio = { + .name = "pxa2xx-ac97", + .id = -1, +}; + +/* WM9712 touchscreen controller. Hopefully the driver will make it to + * the mainstream sometime */ +static struct platform_device em_x270_ts = { + .name = "wm97xx-ts", + .id = -1, +}; + +/* RTC */ +static struct resource em_x270_v3020_resource[] = { + [0] = { + .start = PXA_CS4_PHYS, + .end = PXA_CS4_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct v3020_platform_data em_x270_v3020_platdata = { + .leftshift = 0, +}; + +static struct platform_device em_x270_rtc = { + .name = "v3020", + .num_resources = ARRAY_SIZE(em_x270_v3020_resource), + .resource = em_x270_v3020_resource, + .id = -1, + .dev = { + .platform_data = &em_x270_v3020_platdata, + } +}; + +/* NAND flash */ +#define GPIO_NAND_CS (11) +#define GPIO_NAND_RB (56) + +static inline void nand_cs_on(void) +{ + GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); +} + +static void nand_cs_off(void) +{ + dsb(); + + GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); +} + +/* hardware specific access to control-lines */ +static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + + dsb(); + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_ALE) + nandaddr |= (1 << 3); + else + nandaddr &= ~(1 << 3); + if (ctrl & NAND_CLE) + nandaddr |= (1 << 2); + else + nandaddr &= ~(1 << 2); + if (ctrl & NAND_NCE) + nand_cs_on(); + else + nand_cs_off(); + } + + dsb(); + this->IO_ADDR_W = (void __iomem *)nandaddr; + if (dat != NAND_CMD_NONE) + writel(dat, this->IO_ADDR_W); + + dsb(); +} + +/* read device ready pin */ +static int em_x270_nand_device_ready(struct mtd_info *mtd) +{ + dsb(); + + return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB); +} + +static struct mtd_partition em_x270_partition_info[] = { + [0] = { + .name = "em_x270-0", + .offset = 0, + .size = SZ_4M, + }, + [1] = { + .name = "em_x270-1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +static const char *em_x270_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data em_x270_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(em_x270_partition_info), + .partitions = em_x270_partition_info, + .chip_delay = 20, + .part_probe_types = em_x270_part_probes, + }, + .ctrl = { + .hwcontrol = 0, + .dev_ready = em_x270_nand_device_ready, + .select_chip = 0, + .cmd_ctrl = em_x270_nand_cmd_ctl, + }, +}; + +static struct resource em_x270_nand_resource[] = { + [0] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + 12, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device em_x270_nand = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(em_x270_nand_resource), + .resource = em_x270_nand_resource, + .id = -1, + .dev = { + .platform_data = &em_x270_nand_platdata, + } +}; + +/* platform devices */ +static struct platform_device *platform_devices[] __initdata = { + &em_x270_dm9k, + &em_x270_audio, + &em_x270_ts, + &em_x270_rtc, + &em_x270_nand, +}; + + +/* PXA27x OHCI controller setup */ +static int em_x270_ohci_init(struct device *dev) +{ + /* Set the Power Control Polarity Low */ + UHCHR = (UHCHR | UHCHR_PCPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); + + /* enable port 2 transiever */ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; + + return 0; +} + +static struct pxaohci_platform_data em_x270_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = em_x270_ohci_init, +}; + + +static int em_x270_mci_init(struct device *dev, + irq_handler_t em_x270_detect_int, + void *data) +{ + int err; + + /* setup GPIO for PXA27x MMC controller */ + pxa_gpio_mode(GPIO32_MMCCLK_MD); + pxa_gpio_mode(GPIO112_MMCCMD_MD); + pxa_gpio_mode(GPIO92_MMCDAT0_MD); + pxa_gpio_mode(GPIO109_MMCDAT1_MD); + pxa_gpio_mode(GPIO110_MMCDAT2_MD); + pxa_gpio_mode(GPIO111_MMCDAT3_MD); + + /* EM-X270 uses GPIO13 as SD power enable */ + pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT); + + err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", + __FUNCTION__, err); + return err; + } + + return 0; +} + +static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) +{ + /* + FIXME: current hardware implementation does not allow to + enable/disable MMC power. This will be fixed in next HW releases, + and we'll need to add implmentation here. + */ + return; +} + +static void em_x270_mci_exit(struct device *dev, void *data) +{ + free_irq(EM_X270_MMC_IRQ, data); +} + +static struct pxamci_platform_data em_x270_mci_platform_data = { + .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31, + .init = em_x270_mci_init, + .setpower = em_x270_mci_setpower, + .exit = em_x270_mci_exit, +}; + +/* LCD 480x640 */ +static struct pxafb_mode_info em_x270_lcd_mode = { + .pixclock = 50000, + .bpp = 16, + .xres = 480, + .yres = 640, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 0, + .right_margin = 24, + .lower_margin = 4, + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info em_x270_lcd = { + .modes = &em_x270_lcd_mode, + .num_modes = 1, + .cmap_inverse = 0, + .cmap_static = 0, + .lccr0 = LCCR0_PAS, + .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff), +}; + +static void __init em_x270_init(void) +{ + /* setup LCD */ + set_pxa_fb_info(&em_x270_lcd); + + /* register EM-X270 platform devices */ + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + /* set MCI and OHCI platform parameters */ + pxa_set_mci_info(&em_x270_mci_platform_data); + pxa_set_ohci_info(&em_x270_ohci_platform_data); + + /* setup STUART GPIOs */ + pxa_gpio_mode(GPIO46_STRXD_MD); + pxa_gpio_mode(GPIO47_STTXD_MD); + + /* setup BTUART GPIOs */ + pxa_gpio_mode(GPIO42_BTRXD_MD); + pxa_gpio_mode(GPIO43_BTTXD_MD); + pxa_gpio_mode(GPIO44_BTCTS_MD); + pxa_gpio_mode(GPIO45_BTRTS_MD); + + /* Setup interrupt for dm9000 */ + set_irq_type(EM_X270_ETHIRQ, IRQT_RISING); +} + +MACHINE_START(EM_X270, "Compulab EM-x270") + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = em_x270_init, +MACHINE_END -- cgit v1.2.1 From 48da78bc93b087eadd8fa840ba661b9442846dee Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 11 Jul 2007 11:29:28 +0100 Subject: [ARM] 4471/1: Compile the uncompressing code with -fno-builtin This is to avoid a compiler warning for overriding the built-in "putc" function. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/boot/compressed/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a1f1691b67fe..6b8cbd69f249 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -73,7 +73,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \ head.o misc.o $(OBJS) -EXTRA_CFLAGS := -fpic +EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := # Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via -- cgit v1.2.1 From cdcb81f7d99f3d525003068b84445dd4acc63266 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jul 2007 10:32:46 +0100 Subject: [ARM] Allow neponset to build again Signed-off-by: Russell King --- arch/arm/mach-sa1100/neponset.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 3a0a1ee2542d..9f1ed1509301 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -292,6 +292,8 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, }; +extern void sa1110_mb_disable(void); + static int __init neponset_init(void) { platform_driver_register(&neponset_device_driver); -- cgit v1.2.1 From 13d5fadf45d12786b90916e95e97f593e91aaf0a Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jul 2007 10:36:05 +0100 Subject: [ARM] Make 'i' and 'zi' targets work The 'i' and 'zi' targets short-circuit the dependencies for 'install' and 'zinstall' targets; these are useful for installing the kernel on platforms which have make but no compiler installed. Signed-off-by: Russell King --- arch/arm/boot/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index ec9c400c7f82..25f12303b106 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -91,4 +91,12 @@ zinstall: $(obj)/zImage $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/zImage System.map "$(INSTALL_PATH)" +zi: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/zImage System.map "$(INSTALL_PATH)" + +i: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image System.map "$(INSTALL_PATH)" + subdir- := bootp compressed -- cgit v1.2.1 From 13a63ab289627e977a045864b36792cf0b61364a Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jul 2007 10:44:02 +0100 Subject: [ARM] rpc: convert an outb() to writeb() Signed-off-by: Russell King --- arch/arm/mach-rpc/riscpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 570cf937e73b..a454451c97c3 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -87,7 +87,7 @@ static void __init rpc_map_io(void) /* * Turn off floppy. */ - outb(0xc, 0x3f2); + writeb(0xc, PCIO_BASE + (0x3f2 << 2)); /* * RiscPC can't handle half-word loads and stores -- cgit v1.2.1 From 0762097625711e829a008b64f42dc0ec74abb284 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:40 +0100 Subject: [ARM] 4500/1: Add locking around the background L2x0 cache operations The background operations of the L2x0 cache controllers are aborted if another operation is issued on the same or different core. This patch protects the maintenance operation issuing/polling with a spinlock. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 08a36f1b35d2..b4e9b734e0bd 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include +#include #include #include @@ -25,14 +26,19 @@ #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; +static DEFINE_SPINLOCK(l2x0_lock); static inline void sync_writel(unsigned long val, unsigned long reg, unsigned long complete_mask) { + unsigned long flags; + + spin_lock_irqsave(&l2x0_lock, flags); writel(val, l2x0_base + reg); /* wait for the operation to complete */ while (readl(l2x0_base + reg) & complete_mask) ; + spin_unlock_irqrestore(&l2x0_lock, flags); } static inline void cache_sync(void) -- cgit v1.2.1 From 367afaf83b0a8886ea566638a865701c54710af9 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:51 +0100 Subject: [ARM] 4501/1: nommu: Select TLS register emulation if ARMv6 and not v6K If not MMU and not v6K, access to the TLS register has to be emulated. MMU-less systems do not provide a high page for kuser helpers. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e7904bc92c73..cccacd9c95af 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -405,6 +405,7 @@ config CPU_32v5 config CPU_32v6 bool + select TLS_REG_EMUL if !CPU_32v6K && !MMU config CPU_32v7 bool -- cgit v1.2.1 From 2a0cc6885f34a8f1de195f718b9f51ece6923b80 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:46 +0100 Subject: [ARM] 4502/1: nommu: Do not export the copy/clear user page functions The __cpu_{clear|copy}_user_page functions are not defined for the MMU-less case and therefore should not be exported. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-syms.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 9f396b4fa0b7..2b5ba396e3a6 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -31,12 +31,14 @@ EXPORT_SYMBOL(__cpuc_coherent_kern_range); EXPORT_SYMBOL(cpu_cache); #endif +#ifdef CONFIG_MMU #ifndef MULTI_USER EXPORT_SYMBOL(__cpu_clear_user_page); EXPORT_SYMBOL(__cpu_copy_user_page); #else EXPORT_SYMBOL(cpu_user); #endif +#endif /* * No module should need to touch the TLB (and currently -- cgit v1.2.1 From 7b4c965a0b74748269d05185a394c9dc121dd558 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:57 +0100 Subject: [ARM] 4504/1: nommu: Fix the ARMv6 support for MMU-less platforms With this patch, Kconfig only selects CPU_HAS_ASID for the MMU case. It also corrects the typo in the v6wbi_tlb_fns definition in pgtable-nommu.h. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index cccacd9c95af..d377376d6eed 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -351,7 +351,7 @@ config CPU_V6 select CPU_CACHE_V6 select CPU_CACHE_VIPT select CPU_CP15_MMU - select CPU_HAS_ASID + select CPU_HAS_ASID if MMU select CPU_COPY_V6 if MMU select CPU_TLB_V6 if MMU -- cgit v1.2.1 From 69ebb22277a53f612ccd632ceb73ed87c9093412 Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Fri, 20 Jul 2007 18:22:57 +0100 Subject: [ARM] 4506/1: HP Jornada 7XX: Addition of SSP Platform Driver These patches add full SSP/MCU support for the HP Jornada 720 machine. Its needed to handle keyboard, touchscreen, battery and backlight/lcd. The main driver exports functions and the header file exports the command values. When talking to the MCU the general procedure is to start MCU, send command (using ssp_inout(command)), the proper reply is always TXDUMMY. After receiving TXDUMMY you can send the value you wish pushed (for example brightness level). End with ssp_end() so the spinlock gets unlocked. Drivers using this havent been implemented yet, but will shortly. Signed-off-by: Kristoffer Ericson Signed-off-by: Russell King --- arch/arm/mach-sa1100/Kconfig | 13 ++- arch/arm/mach-sa1100/Makefile | 2 + arch/arm/mach-sa1100/jornada720_ssp.c | 201 ++++++++++++++++++++++++++++++++++ 3 files changed, 214 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-sa1100/jornada720_ssp.c (limited to 'arch') diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index cd67ab1b217b..f99d9013905f 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -101,6 +101,16 @@ config SA1100_JORNADA720 handheld computer. See for details. +config SA1100_JORNADA720_SSP + bool "HP Jornada 720 Extended SSP driver" + select SA1100_SSP + depends on SA1100_JORNADA720 + help + Say Y here if you have a HP Jornada 7xx handheld computer and you + want to access devices connected to the MCU. Those include the + keyboard, touchscreen, backlight and battery. This driver also activates + the generic SSP which it extends. + config SA1100_HACKKIT bool "HackKit Core CPU Board" help @@ -145,8 +155,7 @@ config SA1100_SSP help Say Y here to enable support for the generic PIO SSP driver. This isn't for audio support, but for attached sensors and - other devices, eg for BadgePAD 4 sensor support, or Jornada - 720 touchscreen support. + other devices, eg for BadgePAD 4 sensor support. config H3600_SLEEVE tristate "Compaq iPAQ Handheld sleeve support" diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e27f15042a22..7a61e8d33ab7 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o +obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o obj-$(CONFIG_SA1100_LART) += lart.o led-$(CONFIG_SA1100_LART) += leds-lart.o @@ -51,3 +52,4 @@ obj-$(CONFIG_LEDS) += $(led-y) # Miscelaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o + diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c new file mode 100644 index 000000000000..0a45e1ac8ad6 --- /dev/null +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -0,0 +1,201 @@ +/** + * arch/arm/mac-sa1100/jornada720_ssp.c + * + * Copyright (C) 2006/2007 Kristoffer Ericson + * Copyright (C) 2006 Filip Zyzniewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * SSP driver for the HP Jornada 710/720/728 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static DEFINE_SPINLOCK(jornada_ssp_lock); +static unsigned long jornada_ssp_flags; + +/** + * jornada_ssp_reverse - reverses input byte + * + * we need to reverse all data we recieve from the mcu due to its physical location + * returns : 01110111 -> 11101110 + */ +u8 inline jornada_ssp_reverse(u8 byte) +{ + return + ((0x80 & byte) >> 7) | + ((0x40 & byte) >> 5) | + ((0x20 & byte) >> 3) | + ((0x10 & byte) >> 1) | + ((0x08 & byte) << 1) | + ((0x04 & byte) << 3) | + ((0x02 & byte) << 5) | + ((0x01 & byte) << 7); +}; +EXPORT_SYMBOL(jornada_ssp_reverse); + +/** + * jornada_ssp_byte - waits for ready ssp bus and sends byte + * + * waits for fifo buffer to clear and then transmits, if it doesn't then we will + * timeout after rounds. Needs mcu running before its called. + * + * returns : %mcu output on success + * : %-ETIMEOUT on timeout + */ +int jornada_ssp_byte(u8 byte) +{ + int timeout = 400000; + u16 ret; + + while ((GPLR & GPIO_GPIO10)) { + if (!--timeout) { + printk(KERN_WARNING "SSP: timeout while waiting for transmit\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } + + ret = jornada_ssp_reverse(byte) << 8; + + ssp_write_word(ret); + ssp_read_word(&ret); + + return jornada_ssp_reverse(ret); +}; +EXPORT_SYMBOL(jornada_ssp_byte); + +/** + * jornada_ssp_inout - decide if input is command or trading byte + * + * returns : (jornada_ssp_byte(byte)) on success + * : %-ETIMEOUT on timeout failure + */ +int jornada_ssp_inout(u8 byte) +{ + int ret, i; + + /* true means command byte */ + if (byte != TXDUMMY) { + ret = jornada_ssp_byte(byte); + /* Proper return to commands is TxDummy */ + if (ret != TXDUMMY) { + for (i = 0; i < 256; i++)/* flushing bus */ + if (jornada_ssp_byte(TXDUMMY) == -1) + break; + return -ETIMEDOUT; + } + } else /* Exchange TxDummy for data */ + ret = jornada_ssp_byte(TXDUMMY); + + return ret; +}; +EXPORT_SYMBOL(jornada_ssp_inout); + +/** + * jornada_ssp_start - enable mcu + * + */ +int jornada_ssp_start() +{ + spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags); + GPCR = GPIO_GPIO25; + udelay(50); + return 0; +}; +EXPORT_SYMBOL(jornada_ssp_start); + +/** + * jornada_ssp_end - disable mcu and turn off lock + * + */ +int jornada_ssp_end() +{ + GPSR = GPIO_GPIO25; + spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags); + return 0; +}; +EXPORT_SYMBOL(jornada_ssp_end); + +static int __init jornada_ssp_probe(struct platform_device *dev) +{ + int ret; + + GPSR = GPIO_GPIO25; + + ret = ssp_init(); + + /* worked fine, lets not bother with anything else */ + if (!ret) { + printk(KERN_INFO "SSP: device initialized with irq\n"); + return ret; + } + + printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n"); + + /* init of Serial 4 port */ + Ser4MCCR0 = 0; + Ser4SSCR0 = 0x0387; + Ser4SSCR1 = 0x18; + + /* clear out any left over data */ + ssp_flush(); + + /* enable MCU */ + jornada_ssp_start(); + + /* see if return value makes sense */ + ret = jornada_ssp_inout(GETBRIGHTNESS); + + /* seems like it worked, just feed it with TxDummy to get rid of data */ + if (ret == TxDummy) + jornada_ssp_inout(TXDUMMY); + + jornada_ssp_end(); + + /* failed, lets just kill everything */ + if (ret == -ETIMEDOUT) { + printk(KERN_WARNING "SSP: attempts failed, bailing\n"); + ssp_exit(); + return -ENODEV; + } + + /* all fine */ + printk(KERN_INFO "SSP: device initialized\n"); + return 0; +}; + +static int jornada_ssp_remove(struct platform_device *dev) +{ + /* Note that this doesnt actually remove the driver, since theres nothing to remove + * It just makes sure everything is turned off */ + GPSR = GPIO_GPIO25; + ssp_exit(); + return 0; +}; + +struct platform_driver jornadassp_driver = { + .probe = jornada_ssp_probe, + .remove = jornada_ssp_remove, + .driver = { + .name = "jornada_ssp", + }, +}; + +static int __init jornada_ssp_init(void) +{ + return platform_driver_register(&jornadassp_driver); +} -- cgit v1.2.1 From 7092fc38ee770251aed361572bf6bed05fcf3ee2 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:29 +0100 Subject: [ARM] 4498/1: ARMv7: Remove the L2 cache configuration via the aux ctrl register The auxiliary control and the L2 auxiliary control registers are Cortex-A8 specific. They need to be removed from the generic ARMv7 support code. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 6 ------ arch/arm/mm/proc-v7.S | 10 ---------- 2 files changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index d377376d6eed..7cc32b707113 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -612,12 +612,6 @@ config CPU_CACHE_ROUND_ROBIN Say Y here to use the predictable round-robin cache replacement policy. Unless you specifically require this or are unsure, say N. -config CPU_L2CACHE_DISABLE - bool "Disable level 2 cache" - depends on CPU_V7 - help - Say Y here to disable the level 2 cache. If unsure, say N. - config CPU_BPREDICT_DISABLE bool "Disable branch prediction" depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 718f4782ee8b..07b0269dafa7 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -176,16 +176,6 @@ __v7_setup: mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register -#ifndef CONFIG_CPU_L2CACHE_DISABLE - @ L2 cache configuration in the L2 aux control register - mrc p15, 1, r10, c9, c0, 2 - bic r10, r10, #(1 << 16) @ L2 outer cache - mcr p15, 1, r10, c9, c0, 2 - @ L2 cache is enabled in the aux control register - mrc p15, 0, r10, c1, c0, 1 - orr r10, r10, #2 - mcr p15, 0, r10, c1, c0, 1 -#endif mrc p15, 0, r0, c1, c0, 0 @ read control register ldr r10, cr1_clear @ get mask for bits to clear bic r0, r0, r10 @ clear bits them -- cgit v1.2.1 From 2eb8c82bc492d5f185150e63eba5eac4dff24178 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:43:02 +0100 Subject: [ARM] 4503/1: nommu: Add noMMU support for ARMv7 This patch adds the necessary ifdef's to the proc-v7.S code and defines the v7wbi_tlb_fns macro in pgtable-nommu.h Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- arch/arm/mm/proc-v7.S | 25 ++++++++++++++----------- 2 files changed, 15 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7cc32b707113..58109ae34709 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -377,7 +377,7 @@ config CPU_V7 select CPU_CACHE_V7 select CPU_CACHE_VIPT select CPU_CP15_MMU - select CPU_HAS_ASID + select CPU_HAS_ASID if MMU select CPU_COPY_V6 if MMU select CPU_TLB_V7 if MMU diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 07b0269dafa7..e0acc5ae6f6f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -77,6 +77,7 @@ ENTRY(cpu_v7_dcache_clean_area) * - we are not using split page tables */ ENTRY(cpu_v7_switch_mm) +#ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB @@ -86,6 +87,7 @@ ENTRY(cpu_v7_switch_mm) isb mcr p15, 0, r1, c13, c0, 1 @ set context ID isb +#endif mov pc, lr /* @@ -109,6 +111,7 @@ ENTRY(cpu_v7_switch_mm) * 1111 0 1 1 r/w r/w */ ENTRY(cpu_v7_set_pte_ext) +#ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version bic r3, r1, #0x000003f0 @@ -136,6 +139,7 @@ ENTRY(cpu_v7_set_pte_ext) str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte +#endif mov pc, lr cpu_v7_name: @@ -169,6 +173,7 @@ __v7_setup: mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif dsb +#ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r10, c2, c0, 2 @ TTB control register orr r4, r4, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB @@ -176,11 +181,12 @@ __v7_setup: mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register - mrc p15, 0, r0, c1, c0, 0 @ read control register - ldr r10, cr1_clear @ get mask for bits to clear - bic r0, r0, r10 @ clear bits them - ldr r10, cr1_set @ get mask for bits to set - orr r0, r0, r10 @ set them +#endif + adr r5, v7_crval + ldmia r5, {r5, r6} + mrc p15, 0, r0, c1, c0, 0 @ read control register + bic r0, r0, r5 @ clear bits them + orr r0, r0, r6 @ set them mov pc, lr @ return to head.S:__ret /* @@ -189,12 +195,9 @@ __v7_setup: * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced * 0 110 0011 1.00 .111 1101 < we want */ - .type cr1_clear, #object - .type cr1_set, #object -cr1_clear: - .word 0x0120c302 -cr1_set: - .word 0x00c0387d + .type v7_crval, #object +v7_crval: + crval clear=0x0120c302, mmuset=0x00c0387d, ucset=0x00c0187c __v7_setup_stack: .space 4 * 11 @ 11 registers -- cgit v1.2.1 From 11179d8ca28d669e3d4cc7573a5f5fdda3e6f02d Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:24 +0100 Subject: [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later Currently, Linux doesn't generate correct page tables for ARMv6 and later cores if the cache policy is different from the default one (it may lead to strongly ordered or shared device mappings). This patch disallows cache policies other than writeback and the CPU_[ID]CACHE_DISABLE options only affect the CP15 system control register rather than the page tables. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- arch/arm/mm/mmu.c | 14 ++++++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 58109ae34709..76a3ba668e2e 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -599,7 +599,7 @@ config CPU_DCACHE_SIZE config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 3b5e47dc0c97..e5d61ee3d4a1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -114,6 +114,10 @@ static void __init early_cachepolicy(char **p) } if (i == ARRAY_SIZE(cache_policies)) printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + if (cpu_architecture() >= CPU_ARCH_ARMv6) { + printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); + cachepolicy = CPOLICY_WRITEBACK; + } flush_cache_all(); set_cr(cr_alignment); } @@ -252,13 +256,15 @@ static void __init build_mem_type_table(void) int cpu_arch = cpu_architecture(); int i; + if (cpu_arch < CPU_ARCH_ARMv6) { #if defined(CONFIG_CPU_DCACHE_DISABLE) - if (cachepolicy > CPOLICY_BUFFERED) - cachepolicy = CPOLICY_BUFFERED; + if (cachepolicy > CPOLICY_BUFFERED) + cachepolicy = CPOLICY_BUFFERED; #elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH) - if (cachepolicy > CPOLICY_WRITETHROUGH) - cachepolicy = CPOLICY_WRITETHROUGH; + if (cachepolicy > CPOLICY_WRITETHROUGH) + cachepolicy = CPOLICY_WRITETHROUGH; #endif + } if (cpu_arch < CPU_ARCH_ARMv5) { if (cachepolicy >= CPOLICY_WRITEALLOC) cachepolicy = CPOLICY_WRITEBACK; -- cgit v1.2.1 From 7bbb18c9f4783b6fb3bf27af71625b590cf4f00b Mon Sep 17 00:00:00 2001 From: Bill Gatliff Date: Sat, 21 Jul 2007 03:39:36 +0100 Subject: [ARM] 4507/1: pxa2xx clock_event_device Reimplements arch/arm/mach-pxa/time.c using a clock_event_device based on OSMR0. Tested on PXA270, linux-2.6.22+arm:pxa patches. Signed-off-by: Bill Gatliff Signed-off-by: Russell King --- arch/arm/mach-pxa/time.c | 258 +++++++++++++++++++++++------------------------ 1 file changed, 128 insertions(+), 130 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 6f91fd2d061a..98d27e646b09 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -1,9 +1,11 @@ /* * arch/arm/mach-pxa/time.c * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. + * PXA clocksource, clockevents, and OST interrupt handlers. + * Copyright (c) 2007 by Bill Gatliff . + * + * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001 + * by MontaVista Software, Inc. (Nico, your code rocks!) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,164 +14,160 @@ #include #include -#include #include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include +#include + #include #include #include - -static int pxa_set_rtc(void) -{ - unsigned long current_time = xtime.tv_sec; - - if (RTSR & RTSR_ALE) { - /* make sure not to forward the clock over an alarm */ - unsigned long alarm = RTAR; - if (current_time >= alarm && alarm >= RCNR) - return -ERESTARTSYS; - } - RCNR = current_time; - return 0; -} - -#ifdef CONFIG_NO_IDLE_HZ -static unsigned long initial_match; -static int match_posponed; -#endif - static irqreturn_t -pxa_timer_interrupt(int irq, void *dev_id) +pxa_ost0_interrupt(int irq, void *dev_id) { int next_match; - - write_seqlock(&xtime_lock); - -#ifdef CONFIG_NO_IDLE_HZ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - } -#endif - - /* Loop until we get ahead of the free running timer. - * This ensures an exact clock tick count and time accuracy. - * Since IRQs are disabled at this point, coherence between - * lost_ticks(updated in do_timer()) and the match reg value is - * ensured, hence we can use do_gettimeofday() from interrupt - * handlers. - * - * HACK ALERT: it seems that the PXA timer regs aren't updated right - * away in all cases when a write occurs. We therefore compare with - * 8 instead of 0 in the while() condition below to avoid missing a - * match if OSCR has already reached the next OSMR value. - * Experience has shown that up to 6 ticks are needed to work around - * this problem, but let's use 8 to be conservative. Note that this - * affect things only when the timer IRQ has been delayed by nearly - * exactly one tick period which should be a pretty rare event. + struct clock_event_device *c = dev_id; + + if (c->mode == CLOCK_EVT_MODE_ONESHOT) { + /* Disarm the compare/match, signal the event. */ + OIER &= ~OIER_E0; + c->event_handler(c); + } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) { + /* Call the event handler as many times as necessary + * to recover missed events, if any (if we update + * OSMR0 and OSCR0 is still ahead of us, we've missed + * the event). As we're dealing with that, re-arm the + * compare/match for the next event. + * + * HACK ALERT: + * + * There's a latency between the instruction that + * writes to OSMR0 and the actual commit to the + * physical hardware, because the CPU doesn't (have + * to) run at bus speed, there's a write buffer + * between the CPU and the bus, etc. etc. So if the + * target OSCR0 is "very close", to the OSMR0 load + * value, the update to OSMR0 might not get to the + * hardware in time and we'll miss that interrupt. + * + * To be safe, if the new OSMR0 is "very close" to the + * target OSCR0 value, we call the event_handler as + * though the event actually happened. According to + * Nico's comment in the previous version of this + * code, experience has shown that 6 OSCR ticks is + * "very close" but he went with 8. We will use 16, + * based on the results of testing on PXA270. + * + * To be doubly sure, we also tell clkevt via + * clockevents_register_device() not to ask for + * anything that might put us "very close". */ +#define MIN_OSCR_DELTA 16 do { - timer_tick(); - OSSR = OSSR_M0; /* Clear match on timer 0 */ + OSSR = OSSR_M0; next_match = (OSMR0 += LATCH); - } while( (signed long)(next_match - OSCR) <= 8 ); - - write_sequnlock(&xtime_lock); + c->event_handler(c); + } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA) + && (c->mode == CLOCK_EVT_MODE_PERIODIC)); + } return IRQ_HANDLED; } -static struct irqaction pxa_timer_irq = { - .name = "PXA Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = pxa_timer_interrupt, +static int +pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) +{ + unsigned long irqflags; + + raw_local_irq_save(irqflags); + OSMR0 = OSCR + delta; + OSSR = OSSR_M0; + OIER |= OIER_E0; + raw_local_irq_restore(irqflags); + return 0; +} + +static void +pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long irqflags; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + raw_local_irq_save(irqflags); + OSMR0 = OSCR + LATCH; + OSSR = OSSR_M0; + OIER |= OIER_E0; + raw_local_irq_restore(irqflags); + break; + + case CLOCK_EVT_MODE_ONESHOT: + raw_local_irq_save(irqflags); + OIER &= ~OIER_E0; + raw_local_irq_restore(irqflags); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + /* initializing, released, or preparing for suspend */ + raw_local_irq_save(irqflags); + OIER &= ~OIER_E0; + raw_local_irq_restore(irqflags); + break; + } +} + +static struct clock_event_device ckevt_pxa_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .cpumask = CPU_MASK_CPU0, + .set_next_event = pxa_osmr0_set_next_event, + .set_mode = pxa_osmr0_set_mode, }; -static cycle_t pxa_get_cycles(void) +static cycle_t pxa_read_oscr(void) { return OSCR; } -static struct clocksource clocksource_pxa = { - .name = "pxa_timer", +static struct clocksource cksrc_pxa_oscr0 = { + .name = "oscr0", .rating = 200, - .read = pxa_get_cycles, + .read = pxa_read_oscr, .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct irqaction pxa_ost0_irq = { + .name = "ost0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = pxa_ost0_interrupt, + .dev_id = &ckevt_pxa_osmr0, +}; + static void __init pxa_timer_init(void) { - struct timespec tv; - unsigned long flags; + OIER = 0; + OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - set_rtc = pxa_set_rtc; + ckevt_pxa_osmr0.mult = + div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); + ckevt_pxa_osmr0.max_delta_ns = + clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); + ckevt_pxa_osmr0.min_delta_ns = + clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1; - OIER = 0; /* disable any timer interrupts */ - OSSR = 0xf; /* clear status on all timers */ - setup_irq(IRQ_OST0, &pxa_timer_irq); - local_irq_save(flags); - OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSMR0 = OSCR + LATCH; /* set initial match */ - local_irq_restore(flags); - - /* - * OSCR runs continuously on PXA and is not written to, - * so we can use it as clock source directly. - */ - clocksource_pxa.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift); - clocksource_register(&clocksource_pxa); -} - -#ifdef CONFIG_NO_IDLE_HZ -static int pxa_dyn_tick_enable_disable(void) -{ - /* nothing to do */ - return 0; -} + cksrc_pxa_oscr0.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift); -static void pxa_dyn_tick_reprogram(unsigned long ticks) -{ - if (ticks > 1) { - initial_match = OSMR0; - OSMR0 = initial_match + ticks * LATCH; - match_posponed = 1; - } -} + setup_irq(IRQ_OST0, &pxa_ost0_irq); -static irqreturn_t -pxa_dyn_tick_handler(int irq, void *dev_id) -{ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - if ( (signed long)(initial_match - OSCR) <= 8 ) - return pxa_timer_interrupt(irq, dev_id); - } - return IRQ_NONE; + clocksource_register(&cksrc_pxa_oscr0); + clockevents_register_device(&ckevt_pxa_osmr0); } -static struct dyn_tick_timer pxa_dyn_tick = { - .enable = pxa_dyn_tick_enable_disable, - .disable = pxa_dyn_tick_enable_disable, - .reprogram = pxa_dyn_tick_reprogram, - .handler = pxa_dyn_tick_handler, -}; -#endif - #ifdef CONFIG_PM static unsigned long osmr[4], oier; @@ -191,7 +189,10 @@ static void pxa_timer_resume(void) OIER = oier; /* - * OSMR0 is the system timer: make sure OSCR is sufficiently behind + * OSCR0 is the system timer, which has to increase + * monotonically until it rolls over in hardware. The value + * (OSMR0 - LATCH) is OSCR0 at the most recent system tick, + * which is a handy value to restore to OSCR0. */ OSCR = OSMR0 - LATCH; } @@ -204,7 +205,4 @@ struct sys_timer pxa_timer = { .init = pxa_timer_init, .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, -#ifdef CONFIG_NO_IDLE_HZ - .dyn_tick = &pxa_dyn_tick, -#endif }; -- cgit v1.2.1 From 52c543f90c4095dff71dc125017594b61a753069 Mon Sep 17 00:00:00 2001 From: Quinn Jensen Date: Mon, 9 Jul 2007 22:06:53 +0100 Subject: [ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Kconfig | 8 +++ arch/arm/Makefile | 3 + arch/arm/mach-mx3/Kconfig | 12 ++++ arch/arm/mach-mx3/Makefile | 8 +++ arch/arm/mach-mx3/Makefile.boot | 3 + arch/arm/mach-mx3/mm.c | 64 +++++++++++++++++ arch/arm/mach-mx3/mx31ads.c | 142 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/time.c | 152 ++++++++++++++++++++++++++++++++++++++++ arch/arm/mm/Kconfig | 5 +- arch/arm/plat-mxc/Kconfig | 20 ++++++ arch/arm/plat-mxc/Makefile | 10 +++ arch/arm/plat-mxc/irq.c | 83 ++++++++++++++++++++++ 12 files changed, 508 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-mx3/Kconfig create mode 100644 arch/arm/mach-mx3/Makefile create mode 100644 arch/arm/mach-mx3/Makefile.boot create mode 100644 arch/arm/mach-mx3/mm.c create mode 100644 arch/arm/mach-mx3/mx31ads.c create mode 100644 arch/arm/mach-mx3/time.c create mode 100644 arch/arm/plat-mxc/Kconfig create mode 100644 arch/arm/plat-mxc/Makefile create mode 100644 arch/arm/plat-mxc/irq.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a44c6da9bf83..0658e5d85131 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -324,6 +324,12 @@ config ARCH_NS9XXX +config ARCH_MXC + bool "Freescale MXC/iMX-based" + select ARCH_MTD_XIP + help + Support for Freescale MXC/iMX-based family of processors + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" help @@ -456,6 +462,8 @@ source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/plat-mxc/Kconfig" + source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-ns9xxx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index cbd5010d3bc3..fa4ea9ff0797 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -137,6 +137,8 @@ endif textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000 machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KS8695) := ks8695 + incdir-$(CONFIG_ARCH_MXC) := mxc + machine-$(CONFIG_ARCH_MX3) := mx3 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. @@ -183,6 +185,7 @@ core-$(CONFIG_VFP) += arch/arm/vfp/ core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ +core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig new file mode 100644 index 000000000000..5fe8606cac08 --- /dev/null +++ b/arch/arm/mach-mx3/Kconfig @@ -0,0 +1,12 @@ +menu "MX3 Options" + depends on ARCH_MX3 + +config MACH_MX31ADS + bool "Support MX31ADS platforms" + default y + help + Include support for MX31ADS platform. This includes specific + configurations for the board and its peripherals. + +endmenu + diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile new file mode 100644 index 000000000000..cbec997f332a --- /dev/null +++ b/arch/arm/mach-mx3/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := mm.o time.o +obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot new file mode 100644 index 000000000000..e1dd366f836b --- /dev/null +++ b/arch/arm/mach-mx3/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c new file mode 100644 index 000000000000..41dad485ded9 --- /dev/null +++ b/arch/arm/mach-mx3/mm.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MX31 specific definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +/*! + * @file mm.c + * + * @brief This file creates static virtual to physical mappings, common to all MX3 boards. + * + * @ingroup Memory + */ + +/*! + * This table defines static virtual address mappings for I/O regions. + * These are the mappings common across all MX3 boards. + */ +static struct map_desc mxc_io_desc[] __initdata = { + { + .virtual = X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), + .length = X_MEMC_SIZE, + .type = MT_DEVICE + }, { + .virtual = AVIC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AVIC_BASE_ADDR), + .length = AVIC_SIZE, + .type = MT_NONSHARED_DEVICE + }, +}; + +/*! + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mxc_map_io(void) +{ + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c new file mode 100644 index 000000000000..7e89bdc23a9f --- /dev/null +++ b/arch/arm/mach-mx3/mx31ads.c @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/*! + * @file mx31ads.c + * + * @brief This file contains the board-specific initialization routines. + * + * @ingroup System + */ + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +/*! + * The serial port definition structure. + */ +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), + .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA), + .irq = EXPIO_INT_XUART_INTA, + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, + }, { + .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), + .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB), + .irq = EXPIO_INT_XUART_INTB, + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, + }, + {}, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static int __init mxc_init_extuart(void) +{ + return platform_device_register(&serial_device); +} +#else +static inline int mxc_init_extuart(void) +{ + return 0; +} +#endif + +/*! + * This structure defines static mappings for the i.MX31ADS board. + */ +static struct map_desc mx31ads_io_desc[] __initdata = { + { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = CS4_SIZE / 2, + .type = MT_DEVICE + }, +}; + +/*! + * Set up static virtual mappings. + */ +void __init mx31ads_map_io(void) +{ + mxc_map_io(); + iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); +} + +/*! + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_init_extuart(); +} + +/* + * The following uses standard kernel macros defined in arch.h in order to + * initialize __mach_desc_MX31ADS data structure. + */ +MACHINE_START(MX31ADS, "Freescale MX31ADS") + /* Maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c new file mode 100644 index 000000000000..e81fb5c5d7c3 --- /dev/null +++ b/arch/arm/mach-mx3/time.c @@ -0,0 +1,152 @@ +/* + * System Timer Interrupt reconfigured to run in free-run mode. + * Author: Vitaly Wool + * Copyright 2004 MontaVista Software Inc. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*! + * @file time.c + * @brief This file contains OS tick and wdog timer implementations. + * + * This file contains OS tick and wdog timer implementations. + * + * @ingroup Timers + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/*! + * This is the timer interrupt service routine to do required tasks. + * It also services the WDOG timer at the frequency of twice per WDOG + * timeout value. For example, if the WDOG's timeout value is 4 (2 + * seconds since the WDOG runs at 0.5Hz), it will be serviced once + * every 2/2=1 second. + * + * @param irq GPT interrupt source number (not used) + * @param dev_id this parameter is not used + * @return always returns \b IRQ_HANDLED as defined in + * include/linux/interrupt.h. + */ +static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) +{ + unsigned int next_match; + + write_seqlock(&xtime_lock); + + if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) { + do { + timer_tick(); + next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH; + __raw_writel(GPTSR_OF1, MXC_GPT_GPTSR); + __raw_writel(next_match, MXC_GPT_GPTOCR1); + } while ((signed long)(next_match - + __raw_readl(MXC_GPT_GPTCNT)) <= 0); + } + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +/*! + * This function is used to obtain the number of microseconds since the last + * timer interrupt. Note that interrupts is disabled by do_gettimeofday(). + * + * @return the number of microseconds since the last timer interrupt. + */ +static unsigned long mxc_gettimeoffset(void) +{ + unsigned long ticks_to_match, elapsed, usec, tick_usec, i; + + /* Get ticks before next timer match */ + ticks_to_match = + __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT); + + /* We need elapsed ticks since last match */ + elapsed = LATCH - ticks_to_match; + + /* Now convert them to usec */ + /* Insure no overflow when calculating the usec below */ + for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) { + tick_usec /= i; + if ((0xFFFFFFFF / tick_usec) > elapsed) + break; + } + usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i); + + return usec; +} + +/*! + * The OS tick timer interrupt structure. + */ +static struct irqaction timer_irq = { + .name = "MXC Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = mxc_timer_interrupt +}; + +/*! + * This function is used to initialize the GPT to produce an interrupt + * based on HZ. It is called by start_kernel() during system startup. + */ +void __init mxc_init_time(void) +{ + u32 reg, v; + reg = __raw_readl(MXC_GPT_GPTCR); + reg &= ~GPTCR_ENABLE; + __raw_writel(reg, MXC_GPT_GPTCR); + reg |= GPTCR_SWR; + __raw_writel(reg, MXC_GPT_GPTCR); + + while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0) + cpu_relax(); + + reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ; + __raw_writel(reg, MXC_GPT_GPTCR); + + /* TODO: get timer rate from clk driver */ + v = 66500000; + + __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR); + + if ((v % CLOCK_TICK_RATE) != 0) { + pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n", + CLOCK_TICK_RATE); + } + pr_info("Actual CLOCK_TICK_RATE is %d Hz\n", + v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1)); + + reg = __raw_readl(MXC_GPT_GPTCNT); + reg += LATCH; + __raw_writel(reg, MXC_GPT_GPTOCR1); + + setup_irq(MXC_INT_GPT, &timer_irq); + + reg = __raw_readl(MXC_GPT_GPTCR); + reg = + GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN | + GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE; + __raw_writel(reg, MXC_GPT_GPTCR); + + __raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR); +} + +struct sys_timer mxc_timer = { + .init = mxc_init_time, + .offset = mxc_gettimeoffset, +}; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e7904bc92c73..699b899214ae 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -345,7 +345,8 @@ config CPU_XSC3 # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 + default y if ARCH_MX3 select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 @@ -359,7 +360,7 @@ config CPU_V6 config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP depends on CPU_V6 - default y if SMP + default y if SMP && !ARCH_MX3 help Say Y here if your ARMv6 processor supports the 'K' extension. This enables the kernel to use some instructions not present diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig new file mode 100644 index 000000000000..03a65c0dfb60 --- /dev/null +++ b/arch/arm/plat-mxc/Kconfig @@ -0,0 +1,20 @@ +if ARCH_MXC + +menu "Freescale MXC Implementations" + +choice + prompt "MXC/iMX System Type" + default 0 + +config ARCH_MX3 + bool "MX3-based" + help + This enables support for systems based on the Freescale i.MX3 family + +endchoice + +source "arch/arm/mach-mx3/Kconfig" + +endmenu + +endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile new file mode 100644 index 000000000000..66ad9c2b6d64 --- /dev/null +++ b/arch/arm/plat-mxc/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := irq.o + +obj-m := +obj-n := +obj- := diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c new file mode 100644 index 000000000000..87d253bc3d3c --- /dev/null +++ b/arch/arm/plat-mxc/irq.c @@ -0,0 +1,83 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/*! + * Disable interrupt number "irq" in the AVIC + * + * @param irq interrupt source number + */ +static void mxc_mask_irq(unsigned int irq) +{ + __raw_writel(irq, AVIC_INTDISNUM); +} + +/*! + * Enable interrupt number "irq" in the AVIC + * + * @param irq interrupt source number + */ +static void mxc_unmask_irq(unsigned int irq) +{ + __raw_writel(irq, AVIC_INTENNUM); +} + +static struct irq_chip mxc_avic_chip = { + .mask_ack = mxc_mask_irq, + .mask = mxc_mask_irq, + .unmask = mxc_unmask_irq, +}; + +/*! + * This function initializes the AVIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init mxc_init_irq(void) +{ + int i; + u32 reg; + + /* put the AVIC into the reset value with + * all interrupts disabled + */ + __raw_writel(0, AVIC_INTCNTL); + __raw_writel(0x1f, AVIC_NIMASK); + + /* disable all interrupts */ + __raw_writel(0, AVIC_INTENABLEH); + __raw_writel(0, AVIC_INTENABLEL); + + /* all IRQ no FIQ */ + __raw_writel(0, AVIC_INTTYPEH); + __raw_writel(0, AVIC_INTTYPEL); + for (i = 0; i < MXC_MAX_INT_LINES; i++) { + set_irq_chip(i, &mxc_avic_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + /* Set WDOG2's interrupt the highest priority level (bit 28-31) */ + reg = __raw_readl(AVIC_NIPRIORITY6); + reg |= (0xF << 28); + __raw_writel(reg, AVIC_NIPRIORITY6); + + printk(KERN_INFO "MXC IRQ initialized\n"); +} -- cgit v1.2.1 From 531b617c71e780b14af5931428e0611f930c2134 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:05:25 +0100 Subject: [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c This patch moves items of the s3c24xx support into a new plat-s3c directory for items that use the s3c24xx support but are not directly s3c24xx compatible, such as the s3c2400 and s3c6400. git mv commands: git mv include/asm-arm/arch-s3c2410/iic.h include/asm-arm/plat-s3c/iic.h git mv include/asm-arm/arch-s3c2410/nand.h include/asm-arm/plat-s3c/nand.h git mv include/asm-arm/arch-s3c2410/regs-iic.h include/asm-arm/plat-s3c/regs-iic.h git mv include/asm-arm/arch-s3c2410/regs-nand.h include/asm-arm/plat-s3c/regs-nand.h git mv include/asm-arm/arch-s3c2410/regs-rtc.h include/asm-arm/plat-s3c/regs-rtc.h git mv include/asm-arm/arch-s3c2410/regs-serial.h include/asm-arm/plat-s3c/regs-serial.h git mv include/asm-arm/arch-s3c2410/regs-timer.h include/asm-arm/plat-s3c/regs-timer.h git mv include/asm-arm/arch-s3c2410/regs-watchdog.h include/asm-arm/plat-s3c/regs-watchdog.h Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 2 +- arch/arm/mach-s3c2410/dma.c | 2 +- arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +- arch/arm/mach-s3c2410/mach-bast.c | 6 +++--- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-n30.c | 4 ++-- arch/arm/mach-s3c2410/mach-otom.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 4 ++-- arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +- arch/arm/mach-s3c2410/mach-vr1000.c | 2 +- arch/arm/mach-s3c2410/s3c2410.c | 3 +-- arch/arm/mach-s3c2410/sleep.S | 2 +- arch/arm/mach-s3c2412/clock.c | 2 +- arch/arm/mach-s3c2412/dma.c | 2 +- arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +- arch/arm/mach-s3c2412/mach-vstms.c | 4 ++-- arch/arm/mach-s3c2412/s3c2412.c | 2 +- arch/arm/mach-s3c2440/dma.c | 2 +- arch/arm/mach-s3c2440/mach-anubis.c | 4 ++-- arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 4 ++-- arch/arm/mach-s3c2440/mach-rx3715.c | 4 ++-- arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +- arch/arm/mach-s3c2443/dma.c | 2 +- arch/arm/mach-s3c2443/mach-smdk2443.c | 2 +- arch/arm/plat-s3c24xx/common-smdk.c | 2 +- arch/arm/plat-s3c24xx/cpu.c | 2 +- arch/arm/plat-s3c24xx/devs.c | 2 +- arch/arm/plat-s3c24xx/pm.c | 2 +- arch/arm/plat-s3c24xx/s3c244x.c | 2 +- arch/arm/plat-s3c24xx/sleep.S | 2 +- arch/arm/plat-s3c24xx/time.c | 2 +- 32 files changed, 40 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 5b4831c4c1d8..cab9d6265e9e 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 67d1ad363973..5620ca4d1083 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -23,7 +23,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 435adcce6482..43bb5e106302 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -48,7 +48,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 8b52ea95d4f6..bc926992b4e4 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -36,13 +36,13 @@ #include //#include -#include +#include #include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 5c9bcea74767..4102235e085b 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 412e50c3d28a..621f548da610 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -33,9 +33,9 @@ #include #include -#include +#include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 1f899fa588df..717af40e4477 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index d86e6f18bac9..6cb4a0d2cb4a 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -49,9 +49,9 @@ #include #include -#include +#include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 5852d300d52f..226550504c85 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -47,7 +47,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 7b624bb00490..9f43f3f124f5 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 1a86a9803753..e580303cb0ab 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include @@ -40,7 +40,6 @@ static struct map_desc s3c2410_iodesc[] __initdata = { IODESC_ENT(CLKPWR), - IODESC_ENT(LCD), IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), }; diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index d1eeed2ad47c..8a9c5a2bb252 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -32,7 +32,7 @@ #include #include #include -#include +#include /* s3c2410_cpu_suspend * diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 6a8e4448770b..8543dd6df391 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 668cccefe7b0..48413df88e20 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 063af09f899d..bbc609c3e622 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -32,7 +32,7 @@ #include //#include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index f2fbd65956ac..32982547cd63 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -33,14 +33,14 @@ #include #include -#include +#include #include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 782b5814ced2..12995d859b2c 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index cd035a3ec878..13e4be3392be 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -23,7 +23,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 29c163d300d4..3d3dfa95db8e 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -34,11 +34,11 @@ #include #include -#include +#include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 5e61f2166c76..afe0d7b7e389 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -36,7 +36,7 @@ //#include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 89f4c9c5777b..0ba7e9060c7b 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -31,11 +31,11 @@ #include #include -#include +#include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 866ff71c01dd..b59e6d39f2f2 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -38,12 +38,12 @@ #include #include -#include +#include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index e167254e232e..670115b8a12e 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index f70e8ccffc3d..d8bb4345b48a 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index b1eb709ee65a..8cd93130ef36 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 7ed19b23ce56..398c7ac25296 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 8ce4904d3131..f513ab083b8f 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 5875da0ae0eb..9941508614e4 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 5692eccdf4d1..eab1850616d8 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 767f2e9a3a55..8b2d47f2e80e 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 7b7ae790b00d..d47113bbc34c 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -32,7 +32,7 @@ #include #include #include -#include +#include /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c index b7667375bcec..2ec1daaa0e53 100644 --- a/arch/arm/plat-s3c24xx/time.c +++ b/arch/arm/plat-s3c24xx/time.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include -- cgit v1.2.1 From d58153d86589b6bba2dd19f4c178252f8cf2ed4f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:07:09 +0100 Subject: [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c Create the initial arch/arm/plat-s3c directory and start linking it into the arch/arm build heirarchy ready to receive the generic parts of the S3C24XX support to be used when adding S3C6400 devices. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/plat-s3c/Kconfig | 76 +++++++++++++++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/Kconfig | 60 +--------------------------------- 3 files changed, 78 insertions(+), 59 deletions(-) create mode 100644 arch/arm/plat-s3c/Kconfig (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a44c6da9bf83..950de3644f10 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -432,6 +432,7 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" +source "arch/arm/plat-s3c/Kconfig" if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig new file mode 100644 index 000000000000..21435c2c26aa --- /dev/null +++ b/arch/arm/plat-s3c/Kconfig @@ -0,0 +1,76 @@ +# arch/arm/plat-s3c/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config PLAT_S3C + bool + depends on ARCH_S3C2410 + default y if ARCH_S3C2410 + select NO_IOPORT + help + Base platform code for any Samsung S3C device + +comment "Boot options" + +config S3C2410_BOOT_WATCHDOG + bool "S3C2410 Initialisation watchdog" + depends on PLAT_S3C && S3C2410_WATCHDOG + help + Say y to enable the watchdog during the kernel decompression + stage. If the kernel fails to uncompress, then the watchdog + will trigger a reset and the system should restart. + +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on PLAT_S3C + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + +comment "Power management" + +config S3C2410_PM_DEBUG + bool "S3C2410 PM Suspend debug" + depends on PLAT_S3C && PM + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See + for more information. + +config S3C2410_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on PLAT_S3C && PM && CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + + Note, this can take several seconds depending on memory size + and CPU speed. + + See + +config S3C2410_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on PLAT_S3C && PM && S3C2410_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but wil identify any + faults with better precision. + + See + +config S3C2410_LOWLEVEL_UART_PORT + int "S3C2410 UART to use for low-level messages" + depends on PLAT_S3C + default 0 + help + Choice of which UART port to use for the low-level messages, + such as the `Uncompressing...` at start time. The value of + this configuration should be between zero and two. The port + must have been initialised by the boot-loader before use. diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index b972f36d547c..b66fb3c4e228 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -10,7 +10,7 @@ config PLAT_S3C24XX default y if ARCH_S3C2410 select NO_IOPORT help - Base platform code for any Samsung S3C device + Base platform code for any Samsung S3C24XX device if PLAT_S3C24XX @@ -26,64 +26,6 @@ config PM_SIMTEC Common power management code for systems that are compatible with the Simtec style of power management -config S3C2410_BOOT_WATCHDOG - bool "S3C2410 Initialisation watchdog" - depends on ARCH_S3C2410 && S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - -config S3C2410_BOOT_ERROR_RESET - bool "S3C2410 Reboot on decompression error" - depends on ARCH_S3C2410 - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - -config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on ARCH_S3C2410 && PM - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See - for more information. - -config S3C2410_PM_CHECK - bool "S3C2410 PM Suspend Memory CRC" - depends on ARCH_S3C2410 && PM && CRC32 - help - Enable the PM code's memory area checksum over sleep. This option - will generate CRCs of all blocks of memory, and store them before - going to sleep. The blocks are then checked on resume for any - errors. - - Note, this can take several seconds depending on memory size - and CPU speed. - - See - -config S3C2410_PM_CHECK_CHUNKSIZE - int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK - default 64 - help - Set the chunksize in Kilobytes of the CRC for checking memory - corruption over suspend and resume. A smaller value will mean that - the CRC data block will take more memory, but wil identify any - faults with better precision. - - See - -config S3C2410_LOWLEVEL_UART_PORT - int "S3C2410 UART to use for low-level messages" - default 0 - help - Choice of which UART port to use for the low-level messages, - such as the `Uncompressing...` at start time. The value of - this configuration should be between zero and two. The port - must have been initialised by the boot-loader before use. - config S3C2410_DMA bool "S3C2410 DMA support" depends on ARCH_S3C2410 -- cgit v1.2.1 From b2627588cbeb70364357048854affd52bf02fe64 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:09:44 +0100 Subject: [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support Update the Kconfig to create configuration options based on which CPUs are supported for the low level serial code. This means that the debug macros can be optimised for the type(s) of CPU that are being used. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2412/Kconfig | 1 + arch/arm/mach-s3c2440/Kconfig | 1 + arch/arm/mach-s3c2442/Kconfig | 1 + arch/arm/mach-s3c2443/Kconfig | 1 + arch/arm/plat-s3c/Kconfig | 28 ++++++++++++++++++++++++++++ 6 files changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index d4b013b283c3..e2079cf9266f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -9,6 +9,7 @@ config CPU_S3C2410 depends on ARCH_S3C2410 select S3C2410_CLOCK select S3C2410_GPIO + select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM help Support for S3C2410 and S3C2410A family from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index d5be5d053264..8e8fe48ea47f 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -7,6 +7,7 @@ config CPU_S3C2412 bool depends on ARCH_S3C2410 + select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA help diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index e3bfda098c0f..f1915bd61d15 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -12,6 +12,7 @@ config CPU_S3C2440 select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X + select CPU_LLSERIAL_S3C2440 help Support for S3C2440 Samsung Mobile CPU based systems. diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig index bf8d87abfab3..88d5fd34fe3b 100644 --- a/arch/arm/mach-s3c2442/Kconfig +++ b/arch/arm/mach-s3c2442/Kconfig @@ -11,6 +11,7 @@ config CPU_S3C2442 select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X + select CPU_LLSERIAL_S3C2440 help Support for S3C2442 Samsung Mobile CPU based systems. diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index c649bb2e7ce8..14252f573754 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -8,6 +8,7 @@ config CPU_S3C2443 bool depends on ARCH_S3C2410 select S3C2443_DMA if S3C2410_DMA + select CPU_LLSERIAL_S3C2440 help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 21435c2c26aa..6c206ab3a1d5 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -12,6 +12,34 @@ config PLAT_S3C help Base platform code for any Samsung S3C device +# low-level serial option nodes + +config CPU_LLSERIAL_S3C2410_ONLY + bool + depends on ARCH_S3C2410 + default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 + +config CPU_LLSERIAL_S3C2440_ONLY + bool + depends on ARCH_S3C2410 + default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 + +config CPU_LLSERIAL_S3C2410 + bool + depends on ARCH_S3C2410 + help + Selected if there is an S3C2410 (or register compatible) serial + low-level implementation needed + +config CPU_LLSERIAL_S3C2440 + bool + depends on ARCH_S3C2410 + help + Selected if there is an S3C2440 (or register compatible) serial + low-level implementation needed + +# boot configurations + comment "Boot options" config S3C2410_BOOT_WATCHDOG -- cgit v1.2.1 From c76578460f1a0c4b77c33b2e8e295ccdfa893cdc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:11:20 +0100 Subject: [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT to be CONFIG_S3C_LOWLEVEL_UART_PORT as we move to using plat-s3c for base of S3C operations. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 2 +- arch/arm/boot/compressed/head.S | 2 +- arch/arm/configs/s3c2410_defconfig | 2 +- arch/arm/plat-s3c/Kconfig | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 40c5eb1f55c7..7d067071dc6c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -100,6 +100,6 @@ config DEBUG_S3C2410_UART initialised by the boot-loader before use. The uncompressor code port configuration is now handled - by CONFIG_S3C2410_LOWLEVEL_UART_PORT. + by CONFIG_S3C_LOWLEVEL_UART_PORT. endmenu diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index d7fb5ee1637e..b9b03eda70e5 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -55,7 +55,7 @@ #elif defined(CONFIG_ARCH_S3C2410) .macro loadsp, rb mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT + add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT .endm #else .macro loadsp, rb diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 1d5150e4d6b3..0bdbbe0997f9 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -142,7 +142,7 @@ CONFIG_PM_SIMTEC=y # CONFIG_S3C2410_BOOT_ERROR_RESET is not set # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set -CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set CONFIG_MACH_SMDK=y diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 6c206ab3a1d5..88d797099bf0 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -93,8 +93,8 @@ config S3C2410_PM_CHECK_CHUNKSIZE See -config S3C2410_LOWLEVEL_UART_PORT - int "S3C2410 UART to use for low-level messages" +config S3C_LOWLEVEL_UART_PORT + int "S3C UART to use for low-level messages" depends on PLAT_S3C default 0 help -- cgit v1.2.1 From 3ec20520ddfb654b1e60f51ff5e4769afde51b36 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:12:04 +0100 Subject: [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART Rename DEBUG_S3C2410_PORT to DEBUG_S3C_PORT as well as DEBUG_S3C2410_UART to DEBUG_S3C_UART as part of the updates to moving to plat-s3c for S3C base support. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 16 ++++++++-------- arch/arm/configs/s3c2410_defconfig | 4 ++-- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 7d067071dc6c..18101f5f5f24 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -82,20 +82,20 @@ config DEBUG_CLPS711X_UART2 output to the second serial port on these devices. Saying N will cause the debug messages to appear on the first serial port. -config DEBUG_S3C2410_PORT - depends on DEBUG_LL && ARCH_S3C2410 - bool "Kernel low-level debugging messages via S3C2410 UART" +config DEBUG_S3C_PORT + depends on DEBUG_LL && PLAT_S3C + bool "Kernel low-level debugging messages via S3C UART" help Say Y here if you want debug print routines to go to one of the - S3C2410 internal UARTs. The chosen UART must have been configured + S3C internal UARTs. The chosen UART must have been configured before it is used. -config DEBUG_S3C2410_UART - depends on ARCH_S3C2410 - int "S3C2410 UART to use for low-level debug" +config DEBUG_S3C_UART + depends on PLAT_S3C + int "S3C UART to use for low-level debug" default "0" help - Choice for UART for kernel low-level using S3C2410 UARTS, + Choice for UART for kernel low-level using S3C UARTS, should be between zero and two. The port must have been initialised by the boot-loader before use. diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 0bdbbe0997f9..ada89b6c3919 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1392,8 +1392,8 @@ CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C2410_PORT=y -CONFIG_DEBUG_S3C2410_UART=0 +CONFIG_DEBUG_S3C_PORT=y +CONFIG_DEBUG_S3C_UART=0 # # Security options -- cgit v1.2.1 From a45f82616eaa7e7fcd365ced78d3f0974b991800 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:16:51 +0100 Subject: [ARM] 4518/1: S3C: Rename watchdog configuration options Rename the S3C24XX configuration options for the watchdog boot controls for moving to the arch/arm/plat-s3c moves. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/configs/s3c2410_defconfig | 4 ++-- arch/arm/plat-s3c/Kconfig | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index ada89b6c3919..f8a1645b3d4a 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -138,8 +138,8 @@ CONFIG_ARCH_S3C2410=y CONFIG_PLAT_S3C24XX=y CONFIG_CPU_S3C244X=y CONFIG_PM_SIMTEC=y -# CONFIG_S3C2410_BOOT_WATCHDOG is not set -# CONFIG_S3C2410_BOOT_ERROR_RESET is not set +# CONFIG_S3C_BOOT_WATCHDOG is not set +# CONFIG_S3C_BOOT_ERROR_RESET is not set # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 88d797099bf0..31656c33e05e 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -42,16 +42,16 @@ config CPU_LLSERIAL_S3C2440 comment "Boot options" -config S3C2410_BOOT_WATCHDOG - bool "S3C2410 Initialisation watchdog" +config S3C_BOOT_WATCHDOG + bool "S3C Initialisation watchdog" depends on PLAT_S3C && S3C2410_WATCHDOG help Say y to enable the watchdog during the kernel decompression stage. If the kernel fails to uncompress, then the watchdog will trigger a reset and the system should restart. -config S3C2410_BOOT_ERROR_RESET - bool "S3C2410 Reboot on decompression error" +config S3C_BOOT_ERROR_RESET + bool "S3C Reboot on decompression error" depends on PLAT_S3C help Say y here to use the watchdog to reset the system if the -- cgit v1.2.1 From bf2a3a26d18679c94eca973cb8741e3c1ac53c43 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:20:04 +0100 Subject: [ARM] 4520/1: S3C: Remove old VA values from static map Remove the static maps for the LCD and USB devices. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2412/s3c2412.c | 1 - arch/arm/plat-s3c24xx/s3c244x.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 12995d859b2c..66f471a9d64a 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -63,7 +63,6 @@ static inline void s3c2412_init_gpio2(void) static struct map_desc s3c2412_iodesc[] __initdata = { IODESC_ENT(CLKPWR), - IODESC_ENT(LCD), IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), }; diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 8b2d47f2e80e..3444b13afac5 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -47,7 +47,6 @@ static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), - IODESC_ENT(LCD), }; /* uart initialisation */ -- cgit v1.2.1 From 06cfa556949ead5d3c00dc68108c443be8dd8d17 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:23:02 +0100 Subject: [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410 Move register and other definitions out of the include/asm-arm/arch-s3c2410 into the the arch directories of include/asm-arm/plat-s3c24xx and include/asm-arm/plat-s3c. This move is in preperation of the merging of s3c2400 and s3c6400. The following git mv commands are needed before this patch can be applied: git mv include/asm-arm/arch-s3c2410/regs-ac97.h include/asm-arm/plat-s3c/regs-ac97.h git mv include/asm-arm/arch-s3c2410/regs-adc.h include/asm-arm/plat-s3c/regs-adc.h git mv include/asm-arm/arch-s3c2410/regs-iis.h include/asm-arm/plat-s3c24xx/regs-iis.h git mv include/asm-arm/arch-s3c2410/regs-spi.h include/asm-arm/plat-s3c24xx/regs-spi.h git mv include/asm-arm/arch-s3c2410/regs-udc.h include/asm-arm/plat-s3c24xx/regs-udc.h git mv include/asm-arm/arch-s3c2410/udc.h include/asm-arm/plat-s3c24xx/udc.h Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/dma.c | 6 +++--- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 2 +- arch/arm/mach-s3c2412/dma.c | 6 +++--- arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +- arch/arm/mach-s3c2412/s3c2412.c | 2 +- arch/arm/mach-s3c2440/dma.c | 6 +++--- arch/arm/mach-s3c2443/dma.c | 6 +++--- arch/arm/plat-s3c24xx/devs.c | 4 ++-- 9 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 5620ca4d1083..80d83739ab9f 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -25,12 +25,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { [DMACH_XD0] = { diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 4102235e085b..9a172b4ad720 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -38,7 +38,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 6cb4a0d2cb4a..e670b1e1631b 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -52,7 +52,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 48413df88e20..4b9425c1bf72 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -26,12 +26,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index bbc609c3e622..b126a530daa6 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 66f471a9d64a..e0ccb404623f 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -39,7 +39,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 13e4be3392be..f509f062e749 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -25,12 +25,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { [DMACH_XD0] = { diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index d8bb4345b48a..fc3ede82af8f 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -26,12 +26,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include #define MAP(x) { \ [0] = (x) | DMA_CH_VALID, \ diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 9941508614e4..e546e933b3f7 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -29,11 +29,11 @@ #include #include -#include +#include #include #include -#include +#include /* Serial port registrations */ -- cgit v1.2.1