From 371bc96b89467c89c07a75aa4331bb8327afdc30 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 15 Oct 2009 09:29:32 -0600 Subject: mpc5200: support for the MAN mpc5200 based board uc101 - serial Console on PSC1 - 64MB SDRAM - MTD CFI Flash - Ethernet FEC - I2C with PCF8563 and Temp. Sensor ADM9240 - IDE support Signed-off-by: Heiko Schocher Reviewed-by: Wolfram Sang Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/uc101.dts | 284 +++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 2 files changed, 285 insertions(+) create mode 100644 arch/powerpc/boot/dts/uc101.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts new file mode 100644 index 000000000000..019264c62904 --- /dev/null +++ b/arch/powerpc/boot/dts/uc101.dts @@ -0,0 +1,284 @@ +/* + * Manroland uc101 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "manroland,uc101"; + compatible = "manroland,uc101"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + gpt0: timer@600 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt1: timer@610 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt2: timer@620 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt6: timer@660 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt7: timer@670 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { /* PSC1 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { /* PSC2 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + fsl,preserve-clocking; + clock-frequency = <400000>; + + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00010000>; + }; + partition@750000 { + label = "red. Env"; + reg = <0x00750000 0x00010000>; + }; + partition@760000 { + label = "reserve"; + reg = <0x00760000 0x000a0000>; + }; + }; + + }; +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index c31e5b534f0a..caf6d92a4b83 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static char *board[] __initdata = { "intercontrol,digsy-mtc", + "manroland,uc101", "phytec,pcm030", "phytec,pcm032", "promess,motionpro", -- cgit v1.2.1