From 966dc11fcc48866a24d9b3fd16eeebb3f5e05931 Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Fri, 6 May 2005 05:25:00 -0700 Subject: [IA64] Fix stack placement when INIT hits in kernel mode. Without this patch, the stack is placed _below_ the current task structure, which is risky at best. Tony, I think this patch needs to go into 2.6.12, since it fixes a real bug. Without it, INIT may case secondary errors, which would be most unpleasant. Signed-off-by: David Mosberger-Tang Signed-off-by: Tony Luck --- arch/ia64/kernel/minstate.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h index 1dbc7b2497c9..f6d8a010d99b 100644 --- a/arch/ia64/kernel/minstate.h +++ b/arch/ia64/kernel/minstate.h @@ -41,7 +41,7 @@ (pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \ (pKStk) ld8 r3 = [r3];; \ (pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \ -(pKStk) addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ +(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ (pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ (pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \ ;; \ @@ -50,7 +50,6 @@ (pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ (pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \ ;; \ -(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ (pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ ;; \ (pUStk) mov r18=ar.bsp; \ -- cgit v1.2.1 From 66302f211a21bb9439a2ae7f7b6a4c386bb10ecd Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Tue, 12 Apr 2005 11:04:00 -0700 Subject: [IA64] fix "section mismatch" compile-time-error I noticed this typo when trying to compile a kernel which had CONFIG_HOTPLUG turned off. In that case, __devinit is no longer a no-op and the compiler then detects a section-conflict. Fix by using __devinitdata instead of __devinit. Same patch also submitted by Darren Williams to fix compilation error using sim_defconfig (which has CONFIG_HOTPLUG=n). Signed-off-by: David Mosberger-Tang Signed-off-by: Darren Williams Signed-off-by: Tony Luck --- arch/ia64/kernel/smpboot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 0d5ee57c9865..3865f088ffa2 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -624,7 +624,7 @@ static struct { __u16 thread_id; __u16 proc_fixed_addr; __u8 valid; -}mt_info[NR_CPUS] __devinit; +} mt_info[NR_CPUS] __devinitdata; #ifdef CONFIG_HOTPLUG_CPU static inline void -- cgit v1.2.1 From bfd68594082d8384781c242aa72a7950b5cf51aa Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Wed, 4 May 2005 06:42:00 -0700 Subject: [IA64] Avoid .spillpsp directive in handcoded assembly Some time ago, GAS was fixed to bring the .spillpsp directive in line with the Intel assembler manual (there was some disagreement as to whether or not there is a built-in 16-byte offset). Unfortunately, there are two places in the kernel where this directive is used in handwritten assembly files and those of course relied on the "buggy" behavior. As a result, when using a "fixed" assembler, the kernel picks up the UNaT bits from the wrong place (off by 16) and randomly sets NaT bits on the scratch registers. This can be noticed easily by looking at a coredump and finding various scratch registers with unexpected NaT values. The patch below fixes this by using the .spillsp directive instead, which works correctly no matter what assembler is in use. Signed-off-by: David Mosberger-Tang Signed-off-by: Tony Luck --- arch/ia64/kernel/entry.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 81c45d447394..d99316c9be28 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1182,7 +1182,7 @@ ENTRY(notify_resume_user) ;; (pNonSys) mov out2=0 // out2==0 => not a syscall .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch .body @@ -1208,7 +1208,7 @@ GLOBAL_ENTRY(sys_rt_sigsuspend) adds out2=8,sp // out2=&sigscratch->ar_pfs ;; .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch .body -- cgit v1.2.1 From 4dbc30fb27ac4e647e6efadb382ff7d38c3d368e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 11 May 2005 11:37:00 -0700 Subject: [SPARC64]: Add timeouts to streaming buffer synchronization. If some hardware error occurs and the flush flag never updates, we will hang forever in these routines. Add a timeout, and print out a diagnostic if it is reached. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_iommu.c | 165 ++++++++++++++++------------------------ arch/sparc64/kernel/sbus.c | 31 ++++++-- 2 files changed, 88 insertions(+), 108 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 292983413ae2..f009b1b45501 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -8,6 +8,7 @@ #include #include #include +#include #include @@ -379,6 +380,54 @@ bad: return PCI_DMA_ERROR_CODE; } +static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages) +{ + int limit; + + PCI_STC_FLUSHFLAG_INIT(strbuf); + if (strbuf->strbuf_ctxflush && + iommu->iommu_ctxflush) { + unsigned long matchreg, flushreg; + + flushreg = strbuf->strbuf_ctxflush; + matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); + + limit = 10000; + do { + pci_iommu_write(flushreg, ctx); + udelay(10); + limit--; + if (!limit) + break; + } while(((long)pci_iommu_read(matchreg)) < 0L); + if (!limit) + printk(KERN_WARNING "pci_strbuf_flush: ctx flush " + "timeout vaddr[%08x] ctx[%lx]\n", + vaddr, ctx); + } else { + unsigned long i; + + for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) + pci_iommu_write(strbuf->strbuf_pflush, vaddr); + } + + pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); + (void) pci_iommu_read(iommu->write_complete_reg); + + limit = 10000; + while (!PCI_STC_FLUSHFLAG_SET(strbuf)) { + limit--; + if (!limit) + break; + udelay(10); + membar("#LoadLoad"); + } + if (!limit) + printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout " + "vaddr[%08x] ctx[%lx] npages[%ld]\n", + vaddr, ctx, npages); +} + /* Unmap a single streaming mode DMA translation. */ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) { @@ -386,7 +435,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int struct pci_iommu *iommu; struct pci_strbuf *strbuf; iopte_t *base; - unsigned long flags, npages, i, ctx; + unsigned long flags, npages, ctx; if (direction == PCI_DMA_NONE) BUG(); @@ -414,29 +463,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL; /* Step 1: Kick data out of streaming buffers if necessary. */ - if (strbuf->strbuf_enabled) { - u32 vaddr = bus_addr; - - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (strbuf->strbuf_ctxflush && - iommu->iommu_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, vaddr); - } - - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); - } + if (strbuf->strbuf_enabled) + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -647,29 +675,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL; /* Step 1: Kick data out of streaming buffers if necessary. */ - if (strbuf->strbuf_enabled) { - u32 vaddr = (u32) bus_addr; - - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (strbuf->strbuf_ctxflush && - iommu->iommu_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, vaddr); - } - - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); - } + if (strbuf->strbuf_enabled) + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -715,28 +722,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size } /* Step 2: Kick data out of streaming buffers. */ - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (iommu->iommu_ctxflush && - strbuf->strbuf_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - unsigned long i; - - for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, bus_addr); - } - - /* Step 3: Perform flush synchronization sequence. */ - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -749,7 +735,8 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i struct pcidev_cookie *pcp; struct pci_iommu *iommu; struct pci_strbuf *strbuf; - unsigned long flags, ctx; + unsigned long flags, ctx, npages, i; + u32 bus_addr; pcp = pdev->sysdata; iommu = pcp->pbm->iommu; @@ -772,36 +759,14 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i } /* Step 2: Kick data out of streaming buffers. */ - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (iommu->iommu_ctxflush && - strbuf->strbuf_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while (((long)pci_iommu_read(matchreg)) < 0L); - } else { - unsigned long i, npages; - u32 bus_addr; - - bus_addr = sglist[0].dma_address & IO_PAGE_MASK; - - for(i = 1; i < nelems; i++) - if (!sglist[i].dma_length) - break; - i--; - npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT; - for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, bus_addr); - } - - /* Step 3: Perform flush synchronization sequence. */ - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); + bus_addr = sglist[0].dma_address & IO_PAGE_MASK; + for(i = 1; i < nelems; i++) + if (!sglist[i].dma_length) + break; + i--; + npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) + - bus_addr) >> IO_PAGE_SHIFT; + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index 14d9c3a21b9a..d3eca98e1fe7 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -117,19 +117,34 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages #define STRBUF_TAG_VALID 0x02UL -static void strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages) +static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages) { + unsigned long n; + int limit; + iommu->strbuf_flushflag = 0UL; - while (npages--) - upa_writeq(base + (npages << IO_PAGE_SHIFT), + n = npages; + while (n--) + upa_writeq(base + (n << IO_PAGE_SHIFT), iommu->strbuf_regs + STRBUF_PFLUSH); /* Whoopee cushion! */ upa_writeq(__pa(&iommu->strbuf_flushflag), iommu->strbuf_regs + STRBUF_FSYNC); upa_readq(iommu->sbus_control_reg); - while (iommu->strbuf_flushflag == 0UL) + + limit = 10000; + while (iommu->strbuf_flushflag == 0UL) { + limit--; + if (!limit) + break; + udelay(10); membar("#LoadLoad"); + } + if (!limit) + printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout " + "vaddr[%08x] npages[%ld]\n", + base, npages); } static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages) @@ -406,7 +421,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT); - strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -569,7 +584,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int iommu = sdev->bus->iommu; spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT); - strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -581,7 +596,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK)); spin_lock_irqsave(&iommu->lock, flags); - strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -605,7 +620,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base; spin_lock_irqsave(&iommu->lock, flags); - strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT); spin_unlock_irqrestore(&iommu->lock, flags); } -- cgit v1.2.1 From 02a017a9f37ae6842e065da919b5952eb847e869 Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Tue, 10 May 2005 11:35:00 -0700 Subject: [IA64] Correct convert_to_non_syscall() convert_to_non_syscall() has the same problem that unwind_to_user() used to have. Fix it likewise. Signed-off-by: David Mosberger-Tang Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 907464ee7273..08c8a5eb25ab 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -692,16 +692,30 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs *pt, unsigned long cfm) { struct unw_frame_info info, prev_info; - unsigned long ip, pr; + unsigned long ip, sp, pr; unw_init_from_blocked_task(&info, child); while (1) { prev_info = info; if (unw_unwind(&info) < 0) return; - if (unw_get_rp(&info, &ip) < 0) + + unw_get_sp(&info, &sp); + if ((long)((unsigned long)child + IA64_STK_OFFSET - sp) + < IA64_PT_REGS_SIZE) { + dprintk("ptrace.%s: ran off the top of the kernel " + "stack\n", __FUNCTION__); + return; + } + if (unw_get_pr (&prev_info, &pr) < 0) { + unw_get_rp(&prev_info, &ip); + dprintk("ptrace.%s: failed to read " + "predicate register (ip=0x%lx)\n", + __FUNCTION__, ip); return; - if (ip < FIXADDR_USER_END) + } + if (unw_is_intr_frame(&info) + && (pr & (1UL << PRED_USER_STACK))) break; } -- cgit v1.2.1 From bb68c12b40c3c745381d7ce61d7b2e371f157505 Mon Sep 17 00:00:00 2001 From: Russ Anderson <(rja@sgi.com)> Date: Mon, 9 May 2005 15:03:00 -0700 Subject: [IA64-SGI] cpe interrupts are not being enabled. acpi_request_vector() is called in ia64_mca_init() to get the cpe_vector. The problem is that acpi_request_vector() looks in platform_intr_list[] to get the vector, but platform_intr_list[] is not initialized with a valid vector until later (in sn_setup()). Without a valid vector the code defaults to polling mode. This patch moves the call to acpi_request_vector() from ia64_mca_init() to ia64_mca_late_init(), which is after platform_intr_list[] is initialized. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 4d6c7b8f667b..2c75741dcc66 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1390,8 +1390,7 @@ ia64_mca_init(void) register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction); #ifdef CONFIG_ACPI - /* Setup the CPEI/P vector and handler */ - cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); + /* Setup the CPEI/P handler */ register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction); #endif @@ -1436,6 +1435,7 @@ ia64_mca_late_init(void) #ifdef CONFIG_ACPI /* Setup the CPEI/P vector and handler */ + cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); init_timer(&cpe_poll_timer); cpe_poll_timer.function = ia64_mca_cpe_poll; -- cgit v1.2.1 From 6872ec548970e9fb3ccd61013f84f9bb8b30fa9a Mon Sep 17 00:00:00 2001 From: Russ Anderson <(rja@sgi.com)> Date: Mon, 16 May 2005 15:30:00 -0700 Subject: [IS64-SGI] Set Altix error handling features The 2.6 kernel has CPE error thresholding. This patch lets SAL know of this error handling feature. The changes are SN specific. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 4fb44984afe6..e64cb8175f7a 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -271,6 +271,8 @@ void __init sn_setup(char **cmdline_p) int major = sn_sal_rev_major(), minor = sn_sal_rev_minor(); extern void sn_cpu_init(void); + ia64_sn_plat_set_error_handling_features(); + /* * If the generic code has enabled vga console support - lets * get rid of it again. This is a kludge for the fact that ACPI -- cgit v1.2.1 From a1ecf7f6e65637ba4470405ad39794710dbf85d4 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 18 May 2005 16:06:00 -0700 Subject: [IA64] alternate perfmon handler Patch from Charles Spirakis Some linux customers want to optimize their applications on the latest hardware but are not yet willing to upgrade to the latest kernel. This patch provides a way to plug in an alternate, basic, and GPL'ed PMU subsystem to help with their monitoring needs or for specialty work. It can also be used in case of serious unexpected bugs in perfmon. Mutual exclusion between the two subsystems is guaranteed, hence no conflict can arise from both subsystem being present. Acked-by: Stephane Eranian Signed-off-by: Tony Luck --- arch/ia64/kernel/perfmon.c | 175 +++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 160 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 71c101601e3e..ab9682f8b044 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -11,7 +11,7 @@ * Version Perfmon-2.x is a rewrite of perfmon-1.x * by Stephane Eranian, Hewlett Packard Co. * - * Copyright (C) 1999-2003, 2005 Hewlett Packard Co + * Copyright (C) 1999-2005 Hewlett Packard Co * Stephane Eranian * David Mosberger-Tang * @@ -497,6 +497,9 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ +static spinlock_t pfm_alt_install_check; +static pfm_intr_handler_desc_t *pfm_alt_intr_handler; + static struct proc_dir_entry *perfmon_dir; static pfm_uuid_t pfm_null_uuid = {0,}; @@ -606,6 +609,7 @@ DEFINE_PER_CPU(unsigned long, pfm_syst_info); DEFINE_PER_CPU(struct task_struct *, pmu_owner); DEFINE_PER_CPU(pfm_context_t *, pmu_ctx); DEFINE_PER_CPU(unsigned long, pmu_activation_number); +EXPORT_SYMBOL_GPL(per_cpu__pfm_syst_info); /* forward declaration */ @@ -1325,7 +1329,7 @@ pfm_reserve_session(struct task_struct *task, int is_syswide, unsigned int cpu) error_conflict: DPRINT(("system wide not possible, conflicting session [%d] on CPU%d\n", pfm_sessions.pfs_sys_session[cpu]->pid, - smp_processor_id())); + cpu)); abort: UNLOCK_PFS(flags); @@ -5555,26 +5559,32 @@ pfm_interrupt_handler(int irq, void *arg, struct pt_regs *regs) int ret; this_cpu = get_cpu(); - min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; - max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; + if (likely(!pfm_alt_intr_handler)) { + min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; + max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; - start_cycles = ia64_get_itc(); + start_cycles = ia64_get_itc(); - ret = pfm_do_interrupt_handler(irq, arg, regs); + ret = pfm_do_interrupt_handler(irq, arg, regs); - total_cycles = ia64_get_itc(); + total_cycles = ia64_get_itc(); - /* - * don't measure spurious interrupts - */ - if (likely(ret == 0)) { - total_cycles -= start_cycles; + /* + * don't measure spurious interrupts + */ + if (likely(ret == 0)) { + total_cycles -= start_cycles; - if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; - if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; + if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; + if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; - pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + } + } + else { + (*pfm_alt_intr_handler->handler)(irq, arg, regs); } + put_cpu_no_resched(); return IRQ_HANDLED; } @@ -6425,6 +6435,141 @@ static struct irqaction perfmon_irqaction = { .name = "perfmon" }; +static void +pfm_alt_save_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * should not be necessary but + * let's take not risk + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * This call is required + * May cause a spurious interrupt on some processors + */ + pfm_freeze_pmu(); + + ia64_srlz_d(); +} + +void +pfm_alt_restore_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * put PMU back in state expected + * by perfmon + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * perfmon runs with PMU unfrozen at all times + */ + pfm_unfreeze_pmu(); + + ia64_srlz_d(); +} + +int +pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int ret, i; + int reserve_cpu; + + /* some sanity checks */ + if (hdl == NULL || hdl->handler == NULL) return -EINVAL; + + /* do the easy test first */ + if (pfm_alt_intr_handler) return -EBUSY; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + /* reserve our session */ + for_each_online_cpu(reserve_cpu) { + ret = pfm_reserve_session(NULL, 1, reserve_cpu); + if (ret) goto cleanup_reserve; + } + + /* save the current system wide pmu states */ + ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + goto cleanup_reserve; + } + + /* officially change to the alternate interrupt handler */ + pfm_alt_intr_handler = hdl; + + spin_unlock(&pfm_alt_install_check); + + return 0; + +cleanup_reserve: + for_each_online_cpu(i) { + /* don't unreserve more than we reserved */ + if (i >= reserve_cpu) break; + + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return ret; +} +EXPORT_SYMBOL_GPL(pfm_install_alt_pmu_interrupt); + +int +pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int i; + int ret; + + if (hdl == NULL) return -EINVAL; + + /* cannot remove someone else's handler! */ + if (pfm_alt_intr_handler != hdl) return -EINVAL; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + pfm_alt_intr_handler = NULL; + + ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + } + + for_each_online_cpu(i) { + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return 0; +} +EXPORT_SYMBOL_GPL(pfm_remove_alt_pmu_interrupt); + /* * perfmon initialization routine, called from the initcall() table */ -- cgit v1.2.1 From fe12e25ebdd195a57d3fd655061fd2525609b16b Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 18 May 2005 17:09:06 -0700 Subject: [IA64] initialize spinlock pfm_alt_install_check I applied the penultimate version of the perfmon patch, which didn't have the initialization of the new spinlock that was added. Signed-off-by: Tony Luck --- arch/ia64/kernel/perfmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index ab9682f8b044..0e58ec7db128 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -497,7 +497,7 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ -static spinlock_t pfm_alt_install_check; +static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED; static pfm_intr_handler_desc_t *pfm_alt_intr_handler; static struct proc_dir_entry *perfmon_dir; -- cgit v1.2.1 From 6c37a88c5b1195d4ac74d44a6413839b93df5af4 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 20 May 2005 16:57:22 +1000 Subject: [PATCH] ppc32: don't call progress functions after boot On ppc32, the platform code can supply a "progress" function that is used to show progress through the boot. These functions are usually in an init section and so can't be called after the init pages are freed. Now that the cpu bringup code can be called after the system is booted (for hotplug cpu) we can get the situation where the progress function can be called after boot. The simple fix is to set the progress function pointer to NULL when the init pages are freed, and that is what this patch does (note that all callers already check whether the function pointer is NULL before trying to call it). Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc/mm/init.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index be02a7fec2b7..363c157e3617 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -179,6 +179,7 @@ void free_initmem(void) if (!have_of) FREESEC(openfirmware); printk("\n"); + ppc_md.progress = NULL; #undef FREESEC } -- cgit v1.2.1 From 3207a80a6e11c7ceff7e46d5ec6bfcc03c14e729 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 20 May 2005 17:15:00 +1000 Subject: [PATCH] ppc32: remove unused computation We are computing phys in the code below and never using. This patch takes out the redundant computation. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc/syslib/open_pic.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 7619e16fccae..9d4ed68b5804 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -557,12 +557,10 @@ static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec) */ void openpic_cause_IPI(u_int ipi, cpumask_t cpumask) { - cpumask_t phys; DECL_THIS_CPU; CHECK_THIS_CPU; check_arg_ipi(ipi); - phys = physmask(cpumask); openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi), cpus_addr(physmask(cpumask))[0]); } -- cgit v1.2.1 From 72480ef863740c3dc301b0803c9ed6d10716aa11 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 20 May 2005 16:50:55 +1000 Subject: [PATCH] ppc32: Fix __copy_tofrom_user return value Recently the __copy_tofrom_user routine was modified to avoid doing prefetches past the end of the source array. However, in doing so we introduced a bug in that it now returns the wrong value for the number of bytes not copied when a fault is encountered. This fixes it to return the correct number. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc/lib/string.S | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S index 8d08a2eb225e..36c9b97fd92a 100644 --- a/arch/ppc/lib/string.S +++ b/arch/ppc/lib/string.S @@ -446,6 +446,7 @@ _GLOBAL(__copy_tofrom_user) #ifdef CONFIG_8xx /* Don't use prefetch on 8xx */ mtctr r0 + li r0,0 53: COPY_16_BYTES_WITHEX(0) bdnz 53b @@ -564,7 +565,9 @@ _GLOBAL(__copy_tofrom_user) /* or write fault in cacheline loop */ 105: li r9,1 92: li r3,LG_CACHELINE_BYTES - b 99f + mfctr r8 + add r0,r0,r8 + b 106f /* read fault in final word loop */ 108: li r9,0 b 93f @@ -585,7 +588,7 @@ _GLOBAL(__copy_tofrom_user) * r5 + (ctr << r3), and r9 is 0 for read or 1 for write. */ 99: mfctr r0 - slw r3,r0,r3 +106: slw r3,r0,r3 add. r3,r3,r5 beq 120f /* shouldn't happen */ cmpwi 0,r9,0 -- cgit v1.2.1 From 45fed46f5b98aaf439e9ef125992ec853cd98499 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 20 May 2005 16:45:58 +1000 Subject: [PATCH] ppx32: Fix uninitialized variable in set_preferred_console This fixes an uninitialized variable warning in arch/ppc/kernel/setup.c, and this time gcc is actually right, there is a path that could result in offset being uninitialized. Zero is a sane default in this instance. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 309797d7f96d..5c20266e3b1f 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -499,7 +499,7 @@ static int __init set_preferred_console(void) { struct device_node *prom_stdout; char *name; - int offset; + int offset = 0; if (of_stdout_device == NULL) return -ENODEV; -- cgit v1.2.1 From a228dfd5dc4b92288ea22d427b2bfc48ba5bb8b0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 20 May 2005 11:40:32 -0700 Subject: [SPARC64]: Fix bad performance side effect of strbuf timeout changes. The recent change to add a timeout to strbuf flushing had a negative performance impact. The udelay()'s are too long, and they were done in the wrong order wrt. the register read checks. Fix both, and things are happy again. There are more possible improvements in this area. In fact, PCI streaming buffer flushing seems to be part of the bottleneck in network receive performance on my SunBlade1000 box. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_iommu.c | 16 +++++++++------- arch/sparc64/kernel/sbus.c | 4 ++-- 2 files changed, 11 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index f009b1b45501..33ca56c90da2 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -392,14 +392,16 @@ static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, flushreg = strbuf->strbuf_ctxflush; matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - limit = 10000; - do { - pci_iommu_write(flushreg, ctx); - udelay(10); + limit = 100000; + pci_iommu_write(flushreg, ctx); + for(;;) { + if (((long)pci_iommu_read(matchreg)) >= 0L) + break; limit--; if (!limit) break; - } while(((long)pci_iommu_read(matchreg)) < 0L); + udelay(1); + } if (!limit) printk(KERN_WARNING "pci_strbuf_flush: ctx flush " "timeout vaddr[%08x] ctx[%lx]\n", @@ -414,12 +416,12 @@ static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); (void) pci_iommu_read(iommu->write_complete_reg); - limit = 10000; + limit = 100000; while (!PCI_STC_FLUSHFLAG_SET(strbuf)) { limit--; if (!limit) break; - udelay(10); + udelay(1); membar("#LoadLoad"); } if (!limit) diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index d3eca98e1fe7..76ea6455433f 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -133,12 +133,12 @@ static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long iommu->strbuf_regs + STRBUF_FSYNC); upa_readq(iommu->sbus_control_reg); - limit = 10000; + limit = 100000; while (iommu->strbuf_flushflag == 0UL) { limit--; if (!limit) break; - udelay(10); + udelay(1); membar("#LoadLoad"); } if (!limit) -- cgit v1.2.1 From 1c7878f024705594ac455e501ad51e475a400d5d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 May 2005 13:36:19 -0700 Subject: Remove some left-over empty files Hopefully the addition of -E to my applypatch script will mean that I won't have these kinds of leftovers in the future. --- arch/um/kernel/checksum.c | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 arch/um/kernel/checksum.c (limited to 'arch') diff --git a/arch/um/kernel/checksum.c b/arch/um/kernel/checksum.c deleted file mode 100644 index e69de29bb2d1..000000000000 -- cgit v1.2.1 From ba9950c820e556e39cd26581826b5581a64fb641 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:07 -0700 Subject: [PATCH] uml: small fixes left over from rc4 Some changes that I sent in didn't make 2.6.12-rc4 for some reason. This adds them back. We have an x86_64 definition of TOP_ADDR a reimplementation of the x86_64 csum_partial_copy_from_user some syntax fixes in arch/um/kernel/ptrace.c removal of a CFLAGS definition in the x86_64 Makefile some include changes in the x86_64 ptrace.c and user-offsets.h a syntax fix in elf-x86_64.h Also moved an include in the i386 and x86_64 Makefiles to make the symlinks work, and some small fixes from Al Viro. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Kconfig_x86_64 | 4 +++ arch/um/include/sysdep-i386/ptrace.h | 2 +- arch/um/include/sysdep-x86_64/checksum.h | 26 ++++++-------- arch/um/include/sysdep-x86_64/ptrace.h | 62 ++++++++++++++------------------ arch/um/kernel/ptrace.c | 6 ++-- arch/um/kernel/uml.lds.S | 2 ++ arch/um/sys-i386/Makefile | 4 +-- arch/um/sys-x86_64/Makefile | 6 ++-- arch/um/sys-x86_64/ksyms.c | 3 +- arch/um/sys-x86_64/ptrace.c | 9 ++--- arch/um/sys-x86_64/syscalls.c | 1 + arch/um/sys-x86_64/user-offsets.c | 8 +++++ 12 files changed, 65 insertions(+), 68 deletions(-) (limited to 'arch') diff --git a/arch/um/Kconfig_x86_64 b/arch/um/Kconfig_x86_64 index fd8d7e8982b1..f162f50f0b17 100644 --- a/arch/um/Kconfig_x86_64 +++ b/arch/um/Kconfig_x86_64 @@ -6,6 +6,10 @@ config 64BIT bool default y +config TOP_ADDR + hex + default 0x80000000 + config 3_LEVEL_PGTABLES bool default y diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h index 84ec7ff5cf8c..6eaeb9919983 100644 --- a/arch/um/include/sysdep-i386/ptrace.h +++ b/arch/um/include/sysdep-i386/ptrace.h @@ -31,7 +31,6 @@ extern int sysemu_supported; #ifdef UML_CONFIG_MODE_SKAS #include "skas_ptregs.h" -#include "sysdep/faultinfo.h" #define REGS_IP(r) ((r)[HOST_IP]) #define REGS_SP(r) ((r)[HOST_SP]) @@ -59,6 +58,7 @@ extern int sysemu_supported; #define PTRACE_SYSEMU_SINGLESTEP 32 #endif +#include "sysdep/faultinfo.h" #include "choose-mode.h" union uml_pt_regs { diff --git a/arch/um/include/sysdep-x86_64/checksum.h b/arch/um/include/sysdep-x86_64/checksum.h index 572c6c19be33..ea97005af694 100644 --- a/arch/um/include/sysdep-x86_64/checksum.h +++ b/arch/um/include/sysdep-x86_64/checksum.h @@ -9,8 +9,6 @@ #include "linux/in6.h" #include "asm/uaccess.h" -extern unsigned int csum_partial_copy_from(const unsigned char *src, unsigned char *dst, int len, - int sum, int *err_ptr); extern unsigned csum_partial(const unsigned char *buff, unsigned len, unsigned sum); @@ -31,10 +29,15 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char * } static __inline__ -unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, - int len, int sum, int *err_ptr) +unsigned int csum_partial_copy_from_user(const unsigned char *src, + unsigned char *dst, int len, int sum, + int *err_ptr) { - return csum_partial_copy_from(src, dst, len, sum, err_ptr); + if(copy_from_user(dst, src, len)){ + *err_ptr = -EFAULT; + return(-1); + } + return csum_partial(dst, len, sum); } /** @@ -137,15 +140,6 @@ static inline unsigned add32_with_carry(unsigned a, unsigned b) return a; } -#endif +extern unsigned short ip_compute_csum(unsigned char * buff, int len); -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +#endif diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h index 348e8fcd513f..be8acd5efd97 100644 --- a/arch/um/include/sysdep-x86_64/ptrace.h +++ b/arch/um/include/sysdep-x86_64/ptrace.h @@ -135,6 +135,7 @@ extern int mode_tt; __CHOOSE_MODE(SC_EFLAGS(UPT_SC(r)), REGS_EFLAGS((r)->skas.regs)) #define UPT_SC(r) ((r)->tt.sc) #define UPT_SYSCALL_NR(r) __CHOOSE_MODE((r)->tt.syscall, (r)->skas.syscall) +#define UPT_SYSCALL_RET(r) UPT_RAX(r) extern int user_context(unsigned long sp); @@ -196,32 +197,32 @@ struct syscall_args { #define UPT_SET(regs, reg, val) \ - ({ unsigned long val; \ + ({ unsigned long __upt_val = val; \ switch(reg){ \ - case R8: UPT_R8(regs) = val; break; \ - case R9: UPT_R9(regs) = val; break; \ - case R10: UPT_R10(regs) = val; break; \ - case R11: UPT_R11(regs) = val; break; \ - case R12: UPT_R12(regs) = val; break; \ - case R13: UPT_R13(regs) = val; break; \ - case R14: UPT_R14(regs) = val; break; \ - case R15: UPT_R15(regs) = val; break; \ - case RIP: UPT_IP(regs) = val; break; \ - case RSP: UPT_SP(regs) = val; break; \ - case RAX: UPT_RAX(regs) = val; break; \ - case RBX: UPT_RBX(regs) = val; break; \ - case RCX: UPT_RCX(regs) = val; break; \ - case RDX: UPT_RDX(regs) = val; break; \ - case RSI: UPT_RSI(regs) = val; break; \ - case RDI: UPT_RDI(regs) = val; break; \ - case RBP: UPT_RBP(regs) = val; break; \ - case ORIG_RAX: UPT_ORIG_RAX(regs) = val; break; \ - case CS: UPT_CS(regs) = val; break; \ - case DS: UPT_DS(regs) = val; break; \ - case ES: UPT_ES(regs) = val; break; \ - case FS: UPT_FS(regs) = val; break; \ - case GS: UPT_GS(regs) = val; break; \ - case EFLAGS: UPT_EFLAGS(regs) = val; break; \ + case R8: UPT_R8(regs) = __upt_val; break; \ + case R9: UPT_R9(regs) = __upt_val; break; \ + case R10: UPT_R10(regs) = __upt_val; break; \ + case R11: UPT_R11(regs) = __upt_val; break; \ + case R12: UPT_R12(regs) = __upt_val; break; \ + case R13: UPT_R13(regs) = __upt_val; break; \ + case R14: UPT_R14(regs) = __upt_val; break; \ + case R15: UPT_R15(regs) = __upt_val; break; \ + case RIP: UPT_IP(regs) = __upt_val; break; \ + case RSP: UPT_SP(regs) = __upt_val; break; \ + case RAX: UPT_RAX(regs) = __upt_val; break; \ + case RBX: UPT_RBX(regs) = __upt_val; break; \ + case RCX: UPT_RCX(regs) = __upt_val; break; \ + case RDX: UPT_RDX(regs) = __upt_val; break; \ + case RSI: UPT_RSI(regs) = __upt_val; break; \ + case RDI: UPT_RDI(regs) = __upt_val; break; \ + case RBP: UPT_RBP(regs) = __upt_val; break; \ + case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \ + case CS: UPT_CS(regs) = __upt_val; break; \ + case DS: UPT_DS(regs) = __upt_val; break; \ + case ES: UPT_ES(regs) = __upt_val; break; \ + case FS: UPT_FS(regs) = __upt_val; break; \ + case GS: UPT_GS(regs) = __upt_val; break; \ + case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \ default : \ panic("Bad register in UPT_SET : %d\n", reg); \ break; \ @@ -245,14 +246,3 @@ struct syscall_args { CHOOSE_MODE((&(r)->tt.faultinfo), (&(r)->skas.faultinfo)) #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 2b75d8d9ba73..2925e15324de 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -28,9 +28,9 @@ static inline void set_singlestepping(struct task_struct *child, int on) child->thread.singlestep_syscall = 0; #ifdef SUBARCH_SET_SINGLESTEPPING - SUBARCH_SET_SINGLESTEPPING(child, on) + SUBARCH_SET_SINGLESTEPPING(child, on); #endif - } +} /* * Called by kernel/ptrace.c when detaching.. @@ -83,7 +83,7 @@ long sys_ptrace(long request, long pid, long addr, long data) } #ifdef SUBACH_PTRACE_SPECIAL - SUBARCH_PTRACE_SPECIAL(child,request,addr,data) + SUBARCH_PTRACE_SPECIAL(child,request,addr,data); #endif ret = ptrace_check_attach(child, request == PTRACE_KILL); diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 76eadb309189..dd5355500bdc 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -73,6 +73,8 @@ SECTIONS .got : { *(.got.plt) *(.got) } .dynamic : { *(.dynamic) } + .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) } + .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) } /* We want the small data sections together, so single-instruction offsets can access them all, and initialized data all before uninitialized, so we can shorten the on-disk segment size. */ diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index fcd67c3414e4..4351e5605506 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -9,11 +9,11 @@ USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o SYMLINKS = bitops.c semaphore.c highmem.c module.c +include arch/um/scripts/Makefile.rules + bitops.c-dir = lib semaphore.c-dir = kernel highmem.c-dir = mm module.c-dir = kernel subdir- := util - -include arch/um/scripts/Makefile.rules diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 3d7da911cc8c..608466ad6b22 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -14,11 +14,11 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o -include arch/um/scripts/Makefile.rules - SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ semaphore.c thunk.S module.c +include arch/um/scripts/Makefile.rules + bitops.c-dir = lib csum-copy.S-dir = lib csum-partial.c-dir = lib @@ -28,6 +28,4 @@ semaphore.c-dir = kernel thunk.S-dir = lib module.c-dir = kernel -CFLAGS_csum-partial.o := -Dcsum_partial=arch_csum_partial - subdir- := util diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c index a27f0ee6a4f6..859273808203 100644 --- a/arch/um/sys-x86_64/ksyms.c +++ b/arch/um/sys-x86_64/ksyms.c @@ -16,5 +16,4 @@ EXPORT_SYMBOL(__up_wakeup); EXPORT_SYMBOL(__memcpy); /* Networking helper routines. */ -/*EXPORT_SYMBOL(csum_partial_copy_from); -EXPORT_SYMBOL(csum_partial_copy_to);*/ +EXPORT_SYMBOL(ip_compute_csum); diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index b593bb256f2c..74eee5c7c6dd 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -5,10 +5,11 @@ */ #define __FRAME_OFFSETS -#include "asm/ptrace.h" -#include "linux/sched.h" -#include "linux/errno.h" -#include "asm/elf.h" +#include +#include +#include +#include +#include /* XXX x86_64 */ unsigned long not_ss; diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index dd9914642b8e..d4a59657fb99 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -15,6 +15,7 @@ #include "asm/unistd.h" #include "asm/prctl.h" /* XXX This should get the constants from libc */ #include "choose-mode.h" +#include "kern.h" asmlinkage long sys_uname64(struct new_utsname __user * name) { diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c index 5e14792e4838..513d17ceafd4 100644 --- a/arch/um/sys-x86_64/user-offsets.c +++ b/arch/um/sys-x86_64/user-offsets.c @@ -3,6 +3,14 @@ #include #define __FRAME_OFFSETS #include +#include +/* For some reason, x86_64 defines u64 and u32 only in , which I + * refuse to include here, even though they're used throughout the headers. + * These are used in asm/user.h, and that include can't be avoided because of + * the sizeof(struct user_regs_struct) below. + */ +typedef __u64 u64; +typedef __u32 u32; #include #define DEFINE(sym, val) \ -- cgit v1.2.1 From 13479d52c7a61a18900d7f36730b7d3b43723d97 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:08 -0700 Subject: [PATCH] uml: Page fault fixes Any access to a PROT_NONE page should segfault the process. A JVM seems to do this on purpose. Also, Al noticed some bogus code, which is now deleted. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/trap_kern.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 5fca2c61eb98..9ae2eff0d8f3 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -57,10 +57,11 @@ int handle_page_fault(unsigned long address, unsigned long ip, *code_out = SEGV_ACCERR; if(is_write && !(vma->vm_flags & VM_WRITE)) goto out; + + if(!(vma->vm_flags & (VM_READ | VM_EXEC))) + goto out; + page = address & PAGE_MASK; - pgd = pgd_offset(mm, page); - pud = pud_offset(pgd, page); - pmd = pmd_offset(pud, page); do { survive: switch (handle_mm_fault(mm, vma, address, is_write)){ -- cgit v1.2.1 From 060e352236ece3325a684c72817fbacdac597574 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:08 -0700 Subject: [PATCH] uml: Delay loop cleanups This patch cleans up the delay implementations a bit, makes the loops unoptimizable, and exports __udelay and __const_udelay. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/sys-i386/delay.c | 16 ++++++++++++---- arch/um/sys-x86_64/delay.c | 33 +++++++++++++++------------------ 2 files changed, 27 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/um/sys-i386/delay.c b/arch/um/sys-i386/delay.c index e9892eef51ce..2c11b9770e8b 100644 --- a/arch/um/sys-i386/delay.c +++ b/arch/um/sys-i386/delay.c @@ -1,5 +1,7 @@ -#include "linux/delay.h" -#include "asm/param.h" +#include +#include +#include +#include void __delay(unsigned long time) { @@ -20,13 +22,19 @@ void __udelay(unsigned long usecs) int i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i +#include +#include +#include void __delay(unsigned long loops) { unsigned long i; - for(i = 0; i < loops; i++) ; + for(i = 0; i < loops; i++) + cpu_relax(); } void __udelay(unsigned long usecs) { - int i, n; + unsigned long i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i Date: Fri, 20 May 2005 13:59:09 -0700 Subject: [PATCH] uml: multicast driver cleanup Byte-swapping of the port and IP address passed in to the multicast driver by the user used to happen in different places, which was a bug in itself. The port also was swapped before being printk-ed, which led to a misleading message. This patch moves the port swapping to the same place as the IP address swapping. It also cleans up the error paths of mcast_open. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/mcast_kern.c | 4 +--- arch/um/drivers/mcast_user.c | 47 ++++++++++++++------------------------------ 2 files changed, 16 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c index faf714e87b5b..217438cdef33 100644 --- a/arch/um/drivers/mcast_kern.c +++ b/arch/um/drivers/mcast_kern.c @@ -73,7 +73,6 @@ int mcast_setup(char *str, char **mac_out, void *data) struct mcast_init *init = data; char *port_str = NULL, *ttl_str = NULL, *remain; char *last; - int n; *init = ((struct mcast_init) { .addr = "239.192.168.1", @@ -89,13 +88,12 @@ int mcast_setup(char *str, char **mac_out, void *data) } if(port_str != NULL){ - n = simple_strtoul(port_str, &last, 10); + init->port = simple_strtoul(port_str, &last, 10); if((*last != '\0') || (last == port_str)){ printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", port_str); return(0); } - init->port = htons(n); } if(ttl_str != NULL){ diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index 0fe1d9fa9139..7a0d115b29d0 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -38,7 +38,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port) } sin->sin_family = AF_INET; sin->sin_addr.s_addr = in_aton(addr); - sin->sin_port = port; + sin->sin_port = htons(port); return(sin); } @@ -55,28 +55,25 @@ static int mcast_open(void *data) struct mcast_data *pri = data; struct sockaddr_in *sin = pri->mcast_addr; struct ip_mreq mreq; - int fd, yes = 1; + int fd = -EINVAL, yes = 1, err = -EINVAL;; - if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) { - fd = -EINVAL; + if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) goto out; - } fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0){ printk("mcast_open : data socket failed, errno = %d\n", errno); - fd = -ENOMEM; + fd = -errno; goto out; } if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { printk("mcast_open: SO_REUSEADDR failed, errno = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* set ttl according to config */ @@ -84,26 +81,20 @@ static int mcast_open(void *data) sizeof(pri->ttl)) < 0) { printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* set LOOP, so data does get fed back to local sockets */ if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* bind socket to mcast address */ if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { printk("mcast_open : data bind failed, errno = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* subscribe to the multicast group */ @@ -117,12 +108,15 @@ static int mcast_open(void *data) "interface on the host.\n"); printk("eth0 should be configured in order to use the " "multicast transport.\n"); - os_close_file(fd); - fd = -EINVAL; + goto out_close; } out: - return(fd); + return fd; + + out_close: + os_close_file(fd); + return err; } static void mcast_close(int fd, void *data) @@ -164,14 +158,3 @@ struct net_user_info mcast_user_info = { .delete_address = NULL, .max_packet = MAX_PACKET - ETH_HEADER_OTHER }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.1 From 41a9cf8ebe08ccdd5799c175f9758f14617c0b0a Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:10 -0700 Subject: [PATCH] uml: Export clear_user_* From: Oleg Drokin: This patch is needed to support kernel modules that want to use clear_user() (that is exported symbol on all other architectures). Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/ksyms.c | 1 + arch/um/kernel/tt/ksyms.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index 78d69dc74b26..99439fa15ef4 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -57,6 +57,7 @@ EXPORT_SYMBOL(copy_to_user_tt); EXPORT_SYMBOL(strncpy_from_user_skas); EXPORT_SYMBOL(copy_to_user_skas); EXPORT_SYMBOL(copy_from_user_skas); +EXPORT_SYMBOL(clear_user_skas); #endif EXPORT_SYMBOL(uml_strdup); diff --git a/arch/um/kernel/tt/ksyms.c b/arch/um/kernel/tt/ksyms.c index 92ec85d67c7c..84a9385a8fef 100644 --- a/arch/um/kernel/tt/ksyms.c +++ b/arch/um/kernel/tt/ksyms.c @@ -12,6 +12,7 @@ EXPORT_SYMBOL(__do_copy_to_user); EXPORT_SYMBOL(__do_strncpy_from_user); EXPORT_SYMBOL(__do_strnlen_user); EXPORT_SYMBOL(__do_clear_user); +EXPORT_SYMBOL(clear_user_tt); EXPORT_SYMBOL(tracing_pid); EXPORT_SYMBOL(honeypot); -- cgit v1.2.1 From 9b67a3c4cd380968bffe8efb681470acda42b441 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:10 -0700 Subject: [PATCH] uml: initrd cleanup The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from initrd_user.c file under os-Linux dir and join initrd_user.c and initrd_kern.c files in new file initrd.c Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/Makefile | 2 +- arch/um/kernel/initrd.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+), 1 deletion(-) create mode 100644 arch/um/kernel/initrd.c (limited to 'arch') diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 9736ca27c5f0..a8918e80df96 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -14,7 +14,7 @@ obj-y = config.o exec_kern.o exitcode.o \ tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o umid.o \ user_util.o -obj-$(CONFIG_BLK_DEV_INITRD) += initrd_kern.o initrd_user.o +obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o obj-$(CONFIG_GCOV) += gmon_syms.o obj-$(CONFIG_TTY_LOG) += tty_log.o diff --git a/arch/um/kernel/initrd.c b/arch/um/kernel/initrd.c new file mode 100644 index 000000000000..82ecf904b09c --- /dev/null +++ b/arch/um/kernel/initrd.c @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/init.h" +#include "linux/bootmem.h" +#include "linux/initrd.h" +#include "asm/types.h" +#include "user_util.h" +#include "kern_util.h" +#include "initrd.h" +#include "init.h" +#include "os.h" + +/* Changed by uml_initrd_setup, which is a setup */ +static char *initrd __initdata = NULL; + +static int __init read_initrd(void) +{ + void *area; + long long size; + int err; + + if(initrd == NULL) return 0; + err = os_file_size(initrd, &size); + if(err) return 0; + area = alloc_bootmem(size); + if(area == NULL) return 0; + if(load_initrd(initrd, area, size) == -1) return 0; + initrd_start = (unsigned long) area; + initrd_end = initrd_start + size; + return 0; +} + +__uml_postsetup(read_initrd); + +static int __init uml_initrd_setup(char *line, int *add) +{ + initrd = line; + return 0; +} + +__uml_setup("initrd=", uml_initrd_setup, +"initrd=\n" +" This is used to boot UML from an initrd image. The argument is the\n" +" name of the file containing the image.\n\n" +); + +int load_initrd(char *filename, void *buf, int size) +{ + int fd, n; + + fd = os_open_file(filename, of_read(OPENFLAGS()), 0); + if(fd < 0){ + printk("Opening '%s' failed - err = %d\n", filename, -fd); + return(-1); + } + n = os_read_file(fd, buf, size); + if(n != size){ + printk("Read of %d bytes from '%s' failed, err = %d\n", size, + filename, -n); + return(-1); + } + + os_close_file(fd); + return(0); +} +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ -- cgit v1.2.1 From 7b9014c1da380384efe7752db38a0253a74d0238 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:11 -0700 Subject: [PATCH] uml: Remove ubd-mmap support Finally rip out the ubd-mmap code, which turned out to be broken by design. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/ubd_kern.c | 296 +-------------------------------------------- arch/um/kernel/trap_kern.c | 29 ----- 2 files changed, 3 insertions(+), 322 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 9a56ff94308d..88f956c34fed 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -55,7 +55,7 @@ #include "mem_kern.h" #include "cow.h" -enum ubd_req { UBD_READ, UBD_WRITE, UBD_MMAP }; +enum ubd_req { UBD_READ, UBD_WRITE }; struct io_thread_req { enum ubd_req op; @@ -68,8 +68,6 @@ struct io_thread_req { unsigned long sector_mask; unsigned long long cow_offset; unsigned long bitmap_words[2]; - int map_fd; - unsigned long long map_offset; int error; }; @@ -122,10 +120,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file, #define MAX_DEV (8) -/* Changed in early boot */ -static int ubd_do_mmap = 0; -#define UBD_MMAP_BLOCK_SIZE PAGE_SIZE - static struct block_device_operations ubd_blops = { .owner = THIS_MODULE, .open = ubd_open, @@ -175,12 +169,6 @@ struct ubd { int no_cow; struct cow cow; struct platform_device pdev; - - int map_writes; - int map_reads; - int nomap_writes; - int nomap_reads; - int write_maps; }; #define DEFAULT_COW { \ @@ -200,11 +188,6 @@ struct ubd { .openflags = OPEN_FLAGS, \ .no_cow = 0, \ .cow = DEFAULT_COW, \ - .map_writes = 0, \ - .map_reads = 0, \ - .nomap_writes = 0, \ - .nomap_reads = 0, \ - .write_maps = 0, \ } struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; @@ -314,13 +297,6 @@ static int ubd_setup_common(char *str, int *index_out) int major; str++; - if(!strcmp(str, "mmap")){ - CHOOSE_MODE(printk("mmap not supported by the ubd " - "driver in tt mode\n"), - ubd_do_mmap = 1); - return(0); - } - if(!strcmp(str, "sync")){ global_openflags = of_sync(global_openflags); return(0); @@ -524,7 +500,7 @@ static void ubd_handler(void) { struct io_thread_req req; struct request *rq = elv_next_request(ubd_queue); - int n, err; + int n; do_ubd = NULL; intr_count++; @@ -538,19 +514,6 @@ static void ubd_handler(void) return; } - if((req.op != UBD_MMAP) && - ((req.offset != ((__u64) (rq->sector)) << 9) || - (req.length != (rq->current_nr_sectors) << 9))) - panic("I/O op mismatch"); - - if(req.map_fd != -1){ - err = physmem_subst_mapping(req.buffer, req.map_fd, - req.map_offset, 1); - if(err) - printk("ubd_handler - physmem_subst_mapping failed, " - "err = %d\n", -err); - } - ubd_finish(rq, req.error); reactivate_fd(thread_fd, UBD_IRQ); do_ubd_request(ubd_queue); @@ -583,14 +546,10 @@ static int ubd_file_size(struct ubd *dev, __u64 *size_out) static void ubd_close(struct ubd *dev) { - if(ubd_do_mmap) - physmem_forget_descriptor(dev->fd); os_close_file(dev->fd); if(dev->cow.file == NULL) return; - if(ubd_do_mmap) - physmem_forget_descriptor(dev->cow.fd); os_close_file(dev->cow.fd); vfree(dev->cow.bitmap); dev->cow.bitmap = NULL; @@ -1010,94 +969,13 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, req->bitmap_words, bitmap_len); } -static int mmap_fd(struct request *req, struct ubd *dev, __u64 offset) -{ - __u64 sector; - unsigned char *bitmap; - int bit, i; - - /* mmap must have been requested on the command line */ - if(!ubd_do_mmap) - return(-1); - - /* The buffer must be page aligned */ - if(((unsigned long) req->buffer % UBD_MMAP_BLOCK_SIZE) != 0) - return(-1); - - /* The request must be a page long */ - if((req->current_nr_sectors << 9) != PAGE_SIZE) - return(-1); - - if(dev->cow.file == NULL) - return(dev->fd); - - sector = offset >> 9; - bitmap = (unsigned char *) dev->cow.bitmap; - bit = ubd_test_bit(sector, bitmap); - - for(i = 1; i < req->current_nr_sectors; i++){ - if(ubd_test_bit(sector + i, bitmap) != bit) - return(-1); - } - - if(bit || (rq_data_dir(req) == WRITE)) - offset += dev->cow.data_offset; - - /* The data on disk must be page aligned */ - if((offset % UBD_MMAP_BLOCK_SIZE) != 0) - return(-1); - - return(bit ? dev->fd : dev->cow.fd); -} - -static int prepare_mmap_request(struct ubd *dev, int fd, __u64 offset, - struct request *req, - struct io_thread_req *io_req) -{ - int err; - - if(rq_data_dir(req) == WRITE){ - /* Writes are almost no-ops since the new data is already in the - * host page cache - */ - dev->map_writes++; - if(dev->cow.file != NULL) - cowify_bitmap(io_req->offset, io_req->length, - &io_req->sector_mask, &io_req->cow_offset, - dev->cow.bitmap, dev->cow.bitmap_offset, - io_req->bitmap_words, - dev->cow.bitmap_len); - } - else { - int w; - - if((dev->cow.file != NULL) && (fd == dev->cow.fd)) - w = 0; - else w = dev->openflags.w; - - if((dev->cow.file != NULL) && (fd == dev->fd)) - offset += dev->cow.data_offset; - - err = physmem_subst_mapping(req->buffer, fd, offset, w); - if(err){ - printk("physmem_subst_mapping failed, err = %d\n", - -err); - return(1); - } - dev->map_reads++; - } - io_req->op = UBD_MMAP; - io_req->buffer = req->buffer; - return(0); -} - /* Called with ubd_io_lock held */ static int prepare_request(struct request *req, struct io_thread_req *io_req) { struct gendisk *disk = req->rq_disk; struct ubd *dev = disk->private_data; __u64 offset; - int len, fd; + int len; if(req->rq_status == RQ_INACTIVE) return(1); @@ -1114,34 +992,12 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; io_req->fds[1] = dev->fd; - io_req->map_fd = -1; io_req->cow_offset = -1; io_req->offset = offset; io_req->length = len; io_req->error = 0; io_req->sector_mask = 0; - fd = mmap_fd(req, dev, io_req->offset); - if(fd > 0){ - /* If mmapping is otherwise OK, but the first access to the - * page is a write, then it's not mapped in yet. So we have - * to write the data to disk first, then we can map the disk - * page in and continue normally from there. - */ - if((rq_data_dir(req) == WRITE) && !is_remapped(req->buffer)){ - io_req->map_fd = dev->fd; - io_req->map_offset = io_req->offset + - dev->cow.data_offset; - dev->write_maps++; - } - else return(prepare_mmap_request(dev, fd, io_req->offset, req, - io_req)); - } - - if(rq_data_dir(req) == READ) - dev->nomap_reads++; - else dev->nomap_writes++; - io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; io_req->offsets[0] = 0; io_req->offsets[1] = dev->cow.data_offset; @@ -1229,143 +1085,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file, return(-EINVAL); } -static int ubd_check_remapped(int fd, unsigned long address, int is_write, - __u64 offset) -{ - __u64 bitmap_offset; - unsigned long new_bitmap[2]; - int i, err, n; - - /* If it's not a write access, we can't do anything about it */ - if(!is_write) - return(0); - - /* We have a write */ - for(i = 0; i < sizeof(ubd_dev) / sizeof(ubd_dev[0]); i++){ - struct ubd *dev = &ubd_dev[i]; - - if((dev->fd != fd) && (dev->cow.fd != fd)) - continue; - - /* It's a write to a ubd device */ - - /* This should be impossible now */ - if(!dev->openflags.w){ - /* It's a write access on a read-only device - probably - * shouldn't happen. If the kernel is trying to change - * something with no intention of writing it back out, - * then this message will clue us in that this needs - * fixing - */ - printk("Write access to mapped page from readonly ubd " - "device %d\n", i); - return(0); - } - - /* It's a write to a writeable ubd device - it must be COWed - * because, otherwise, the page would have been mapped in - * writeable - */ - - if(!dev->cow.file) - panic("Write fault on writeable non-COW ubd device %d", - i); - - /* It should also be an access to the backing file since the - * COW pages should be mapped in read-write - */ - - if(fd == dev->fd) - panic("Write fault on a backing page of ubd " - "device %d\n", i); - - /* So, we do the write, copying the backing data to the COW - * file... - */ - - err = os_seek_file(dev->fd, offset + dev->cow.data_offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of ubd " - "device %d, err = %d", - offset + dev->cow.data_offset, i, -err); - - n = os_write_file(dev->fd, (void *) address, PAGE_SIZE); - if(n != PAGE_SIZE) - panic("Couldn't copy data to COW file of ubd " - "device %d, err = %d", i, -n); - - /* ... updating the COW bitmap... */ - - cowify_bitmap(offset, PAGE_SIZE, NULL, &bitmap_offset, - dev->cow.bitmap, dev->cow.bitmap_offset, - new_bitmap, dev->cow.bitmap_len); - - err = os_seek_file(dev->fd, bitmap_offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of ubd " - "device %d, err = %d", bitmap_offset, i, -err); - - n = os_write_file(dev->fd, new_bitmap, sizeof(new_bitmap)); - if(n != sizeof(new_bitmap)) - panic("Couldn't update bitmap of ubd device %d, " - "err = %d", i, -n); - - /* Maybe we can map the COW page in, and maybe we can't. If - * it is a pre-V3 COW file, we can't, since the alignment will - * be wrong. If it is a V3 or later COW file which has been - * moved to a system with a larger page size, then maybe we - * can't, depending on the exact location of the page. - */ - - offset += dev->cow.data_offset; - - /* Remove the remapping, putting the original anonymous page - * back. If the COW file can be mapped in, that is done. - * Otherwise, the COW page is read in. - */ - - if(!physmem_remove_mapping((void *) address)) - panic("Address 0x%lx not remapped by ubd device %d", - address, i); - if((offset % UBD_MMAP_BLOCK_SIZE) == 0) - physmem_subst_mapping((void *) address, dev->fd, - offset, 1); - else { - err = os_seek_file(dev->fd, offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of " - "ubd device %d, err = %d", offset, i, - -err); - - n = os_read_file(dev->fd, (void *) address, PAGE_SIZE); - if(n != PAGE_SIZE) - panic("Failed to read page from offset %llx of " - "COW file of ubd device %d, err = %d", - offset, i, -n); - } - - return(1); - } - - /* It's not a write on a ubd device */ - return(0); -} - -static struct remapper ubd_remapper = { - .list = LIST_HEAD_INIT(ubd_remapper.list), - .proc = ubd_check_remapped, -}; - -static int ubd_remapper_setup(void) -{ - if(ubd_do_mmap) - register_remapper(&ubd_remapper); - - return(0); -} - -__initcall(ubd_remapper_setup); - static int same_backing_files(char *from_cmdline, char *from_cow, char *cow) { struct uml_stat buf1, buf2; @@ -1568,15 +1287,6 @@ void do_io(struct io_thread_req *req) int err; __u64 off; - if(req->op == UBD_MMAP){ - /* Touch the page to force the host to do any necessary IO to - * get it into memory - */ - n = *((volatile int *) req->buffer); - req->error = update_bitmap(req); - return; - } - nsectors = req->length / req->sectorsize; start = 0; do { diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 9ae2eff0d8f3..1de22d8a313a 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -107,33 +107,6 @@ out_of_memory: goto out; } -LIST_HEAD(physmem_remappers); - -void register_remapper(struct remapper *info) -{ - list_add(&info->list, &physmem_remappers); -} - -static int check_remapped_addr(unsigned long address, int is_write) -{ - struct remapper *remapper; - struct list_head *ele; - __u64 offset; - int fd; - - fd = phys_mapping(__pa(address), &offset); - if(fd == -1) - return(0); - - list_for_each(ele, &physmem_remappers){ - remapper = list_entry(ele, struct remapper, list); - if((*remapper->proc)(fd, address, is_write, offset)) - return(1); - } - - return(0); -} - /* * We give a *copy* of the faultinfo in the regs to segv. * This must be done, since nesting SEGVs could overwrite @@ -152,8 +125,6 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc) flush_tlb_kernel_vm(); return(0); } - else if(check_remapped_addr(address & PAGE_MASK, is_write)) - return(0); else if(current->mm == NULL) panic("Segfault with no mm"); err = handle_page_fault(address, ip, is_write, is_user, &si.si_code); -- cgit v1.2.1 From 12f49643bc44c428919b210148a930496827dd26 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:12 -0700 Subject: [PATCH] uml: fixrange_init 3-level page table support From: Al Viro - add three-level page table support to fixrange_init. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/mem.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index f156661781cb..c22825f13e40 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -100,12 +100,37 @@ void mem_init(void) #endif } +/* + * Create a page table and place a pointer to it in a middle page + * directory entry. + */ +static void __init one_page_table_init(pmd_t *pmd) +{ + if (pmd_none(*pmd)) { + pte_t *pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + set_pmd(pmd, __pmd(_KERNPG_TABLE + + (unsigned long) __pa(pte))); + if (pte != pte_offset_kernel(pmd, 0)) + BUG(); + } +} + +static void __init one_md_table_init(pud_t *pud) +{ +#ifdef CONFIG_3_LEVEL_PGTABLES + pmd_t *pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE); + set_pud(pud, __pud(_KERNPG_TABLE + (unsigned long) __pa(pmd_table))); + if (pmd_table != pmd_offset(pud, 0)) + BUG(); +#endif +} + static void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; - pte_t *pte; int i, j; unsigned long vaddr; @@ -115,15 +140,12 @@ static void __init fixrange_init(unsigned long start, unsigned long end, pgd = pgd_base + i; for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) { - pmd = (pmd_t *)pgd; + pud = pud_offset(pgd, vaddr); + if (pud_none(*pud)) + one_md_table_init(pud); + pmd = pmd_offset(pud, vaddr); for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) { - if (pmd_none(*pmd)) { - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); - set_pmd(pmd, __pmd(_KERNPG_TABLE + - (unsigned long) __pa(pte))); - if (pte != pte_offset_kernel(pmd, 0)) - BUG(); - } + one_page_table_init(pmd); vaddr += PMD_SIZE; } j = 0; -- cgit v1.2.1 From 84ddaa8c86fc12ee1c3509be5ff3464821535c17 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 20 May 2005 13:59:12 -0700 Subject: [PATCH] uml: Change printf to printk in console driver From: Al Viro - we have error messages with KERN_ERR in them, so they should be printk-ed rather than printf-ed. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/chan_kern.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 0150038af795..14a12d6b3df6 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -20,9 +20,17 @@ #include "os.h" #ifdef CONFIG_NOCONFIG_CHAN + +/* The printk's here are wrong because we are complaining that there is no + * output device, but printk is printing to that output device. The user will + * never see the error. printf would be better, except it can't run on a + * kernel stack because it will overflow it. + * Use printk for now since that will avoid crashing. + */ + static void *not_configged_init(char *str, int device, struct chan_opts *opts) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(NULL); } @@ -30,27 +38,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts) static int not_configged_open(int input, int output, int primary, void *data, char **dev_out) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-ENODEV); } static void not_configged_close(int fd, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); } static int not_configged_read(int fd, char *c_out, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } static int not_configged_write(int fd, const char *buf, int len, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } @@ -58,7 +66,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data) static int not_configged_console_write(int fd, const char *buf, int len, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } @@ -66,7 +74,7 @@ static int not_configged_console_write(int fd, const char *buf, int len, static int not_configged_window_size(int fd, void *data, unsigned short *rows, unsigned short *cols) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-ENODEV); } -- cgit v1.2.1 From 7f8cd80fb261177244c1479cfcad1387dbf3cd4b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 20 May 2005 13:59:13 -0700 Subject: [PATCH] ppc32: Fix platform device initialization of 8250 serial ports Initialization of 8250 serial ports that are platform devices require that at empty entry exists in the array of plat_serial8250_port. With out an empty entry we can get some pretty random behavior. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/mpc83xx_devices.c | 1 + arch/ppc/syslib/mpc85xx_devices.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index 5c1a919eaabf..75c8e9834ae7 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, }, + { }, }; struct platform_device ppc_sys_platform_devices[] = { diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index a231795ee26f..1e658ef57e75 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, }, + { }, }; struct platform_device ppc_sys_platform_devices[] = { -- cgit v1.2.1 From b2665f92ae67a2d086537979d317a6f3a5697c63 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 20 May 2005 13:59:14 -0700 Subject: [PATCH] ppc32: fix CONFIG_TASK_SIZE handling on 44x This patch fixed CONFIG_TASK_SIZE handling on 44x. Currently head_44x.S hardcodes 0x80000000, which breaks if user chooses to change TASK_SIZE (e.g. for 3G user-space). Tested on Ocotea in 3G/1G configuration. Signed-off-by: Eugene Surovegin Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/head_44x.S | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 9b6a8e513657..6c7ae6052464 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -330,8 +330,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l @@ -464,8 +465,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l @@ -533,8 +535,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l -- cgit v1.2.1 From b41e29398a873945d02e0009ce7e57608fdb4042 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 20 May 2005 14:27:55 -0700 Subject: [PATCH] x86_64: 386/x86-64 Further AMD dual core fixes - Remove duplicated ifdef - Make core_id match what Intel uses - Initialize phys_proc_id correctly for non DC case - Handle non power of two core numbers. Fixes for both i386 and x86-64 Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/amd.c | 9 ++++++--- arch/i386/kernel/cpu/common.c | 5 +---- arch/x86_64/kernel/setup.c | 25 ++++++++++++------------- 3 files changed, 19 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index fa34a06c0d79..73aeaf5a9d4e 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -195,7 +195,7 @@ static void __init init_amd(struct cpuinfo_x86 *c) c->x86_num_cores = 1; } -#ifdef CONFIG_X86_SMP +#ifdef CONFIG_X86_HT /* * On a AMD dual core setup the lower bits of the APIC id * distingush the cores. Assumes number of cores is a power @@ -203,8 +203,11 @@ static void __init init_amd(struct cpuinfo_x86 *c) */ if (c->x86_num_cores > 1) { int cpu = smp_processor_id(); - /* Fix up the APIC ID following AMD specifications. */ - cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1); + unsigned bits = 0; + while ((1 << bits) < c->x86_num_cores) + bits++; + cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<>= bits; printk(KERN_INFO "CPU %d(%d) -> Core %d\n", cpu, c->x86_num_cores, cpu_core_id[cpu]); } diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 11e6e6f23fa0..d199e525680a 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -244,11 +244,8 @@ static void __init early_cpu_detect(void) early_intel_workaround(c); -#ifdef CONFIG_SMP #ifdef CONFIG_X86_HT - phys_proc_id[smp_processor_id()] = -#endif - cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; + phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; #endif } diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index b9fd0252c279..99f038ede23c 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -719,7 +719,6 @@ static void __init display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_SMP /* * On a AMD dual core setup the lower bits of the APIC id distingush the cores. * Assumes number of cores is a power of two. @@ -729,16 +728,24 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #ifdef CONFIG_SMP int cpu = smp_processor_id(); int node = 0; + unsigned bits; if (c->x86_num_cores == 1) return; - /* Fix up the APIC ID following the AMD specification. */ - cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1); + + bits = 0; + while ((1 << bits) < c->x86_num_cores) + bits++; + + /* Low order bits define the core id (index of core in socket) */ + cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1); + /* Convert the APIC ID into the socket ID */ + phys_proc_id[cpu] >>= bits; #ifdef CONFIG_NUMA /* When an ACPI SRAT table is available use the mappings from SRAT instead. */ if (acpi_numa <= 0) { - node = cpu_core_id[cpu]; + node = phys_proc_id[cpu]; if (!node_online(node)) node = first_node(node_online_map); cpu_to_node[cpu] = node; @@ -746,18 +753,11 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) node = cpu_to_node[cpu]; } #endif - /* For now: - better than BAD_APIC_ID at least*/ - phys_proc_id[cpu] = cpu_core_id[cpu]; printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", cpu, c->x86_num_cores, node, cpu_core_id[cpu]); #endif } -#else -static void __init amd_detect_cmp(struct cpuinfo_x86 *c) -{ -} -#endif static int __init init_amd(struct cpuinfo_x86 *c) { @@ -963,8 +963,7 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c) } #ifdef CONFIG_SMP - phys_proc_id[smp_processor_id()] = - cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; + phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; #endif } -- cgit v1.2.1 From c4d1fcf3a2ea89b6d6221fa8b4588c77aff50995 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 20 May 2005 14:27:56 -0700 Subject: [PATCH] x86_64: Don't allow accesses below register frame in ptrace There was a "off by one quad word" error in there. I don't think it is exploitable because it will only store into a unused area, but better to plug it. Found and fixed by John Blackwood Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index 60dc9b98951d..525f6a128a27 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -380,7 +380,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data break; switch (addr) { - case 0 ... sizeof(struct user_regs_struct): + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): tmp = getreg(child, addr); break; case offsetof(struct user, u_debugreg[0]): @@ -425,7 +425,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data break; switch (addr) { - case 0 ... sizeof(struct user_regs_struct): + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): ret = putreg(child, addr, data); break; /* Disallows to set a breakpoint into the vsyscall */ -- cgit v1.2.1 From 7856dfeb23c16ef3d8dac8871b4d5b93c70b59b9 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 20 May 2005 14:27:57 -0700 Subject: [PATCH] x86_64: Fixed guard page handling again in iounmap Caused oopses again. Also fix potential mismatch in checking if change_page_attr was needed. To do it without races I needed to change mm/vmalloc.c to export a __remove_vm_area that does not take vmlist lock. Noticed by Terence Ripperda and based on a patch of his. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/mm/ioremap.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c index c6fb0cb69992..58aac23760ef 100644 --- a/arch/x86_64/mm/ioremap.c +++ b/arch/x86_64/mm/ioremap.c @@ -133,7 +133,7 @@ ioremap_change_attr(unsigned long phys_addr, unsigned long size, unsigned long flags) { int err = 0; - if (flags && phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) { + if (phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) { unsigned long npages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; unsigned long vaddr = (unsigned long) __va(phys_addr); @@ -214,7 +214,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr)); return NULL; } - if (ioremap_change_attr(phys_addr, size, flags) < 0) { + if (flags && ioremap_change_attr(phys_addr, size, flags) < 0) { area->flags &= 0xffffff; vunmap(addr); return NULL; @@ -251,7 +251,7 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size) void iounmap(volatile void __iomem *addr) { - struct vm_struct *p, **pprev; + struct vm_struct *p; if (addr <= high_memory) return; @@ -260,24 +260,11 @@ void iounmap(volatile void __iomem *addr) return; write_lock(&vmlist_lock); - for (p = vmlist, pprev = &vmlist; p != NULL; pprev = &p->next, p = *pprev) - if (p->addr == (void *)(PAGE_MASK & (unsigned long)addr)) - break; - if (!p) { - printk("__iounmap: bad address %p\n", addr); - goto out_unlock; - } - *pprev = p->next; - unmap_vm_area(p); - if ((p->flags >> 20) && - p->phys_addr + p->size - 1 < virt_to_phys(high_memory)) { - /* p->size includes the guard page, but cpa doesn't like that */ - change_page_attr_addr((unsigned long)__va(p->phys_addr), - p->size >> PAGE_SHIFT, - PAGE_KERNEL); - global_flush_tlb(); - } -out_unlock: + p = __remove_vm_area((void *)((unsigned long)addr & PAGE_MASK)); + if (!p) + printk("iounmap: bad address %p\n", addr); + else if (p->flags >> 20) + ioremap_change_attr(p->phys_addr, p->size, 0); write_unlock(&vmlist_lock); kfree(p); } -- cgit v1.2.1 From 4057923614e2868a865aa6c6e3bc53542c818d4d Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 20 May 2005 14:27:57 -0700 Subject: [PATCH] i386: Fix race in iounmap We need to hold the vmlist_lock while doing change_page_attr, otherwise we could reset someone else's mapping. Requires previous patch to add __remove_vm_area Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mm/ioremap.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c index db06f7399913..ab542792b27b 100644 --- a/arch/i386/mm/ioremap.c +++ b/arch/i386/mm/ioremap.c @@ -238,19 +238,21 @@ void iounmap(volatile void __iomem *addr) addr < phys_to_virt(ISA_END_ADDRESS)) return; - p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); + write_lock(&vmlist_lock); + p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); if (!p) { - printk("__iounmap: bad address %p\n", addr); - return; + printk("iounmap: bad address %p\n", addr); + goto out_unlock; } if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) { - /* p->size includes the guard page, but cpa doesn't like that */ change_page_attr(virt_to_page(__va(p->phys_addr)), p->size >> PAGE_SHIFT, PAGE_KERNEL); global_flush_tlb(); } +out_unlock: + write_unlock(&vmlist_lock); kfree(p); } -- cgit v1.2.1 From 607a16858397829806c5a4db999ce6daf327f98c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 20 May 2005 14:27:58 -0700 Subject: [PATCH] x86_64: Fix 32bit system call restart The test case at http://cvs.sourceforge.net/viewcvs.py/posixtest/posixtestsuite/conforman ce/interfaces/clock_nanosleep/1-5.c fails if it runs as a 32bit process on x86_86 machines. The root cause is the sub 32bit process fails to restart the syscall after it is interrupted by a signal. The syscall number of sys_restart_syscall in table sys_call_table is __NR_restart_syscall (219) while it's __NR_ia32_restart_syscall (0) in ia32_sys_call_table. When regs->rax==(unsigned long)-ERESTART_RESTARTBLOCK, function do_signal doesn't distinguish if the process is 64bit or 32bit, and always sets restart syscall number as __NR_restart_syscall (219). Signed-off-by: Zhang Yanmin Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/signal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index d439ced150c6..3fdcdba0fec5 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -452,7 +452,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) regs->rip -= 2; } if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) { - regs->rax = __NR_restart_syscall; + regs->rax = test_thread_flag(TIF_IA32) ? + __NR_ia32_restart_syscall : + __NR_restart_syscall; regs->rip -= 2; } } -- cgit v1.2.1 From 14d98cad82b78956957e95567b8b5fb38ec5859f Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 20 May 2005 14:27:59 -0700 Subject: [PATCH] x86_64: Add option to disable timer check This works around the too fast timer seen on some ATI boards. I don't feel confident enough about it yet to enable it by default, but give users the option. Patch and debugging from Christopher Allen Wing , with minor tweaks (renamed the option and documented it) Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/io_apic.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index ac7684324954..80e9b498c443 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -42,6 +42,8 @@ int sis_apic_bug; /* not actually supported, dummy for compile */ +static int no_timer_check; + static DEFINE_SPINLOCK(ioapic_lock); /* @@ -1601,7 +1603,7 @@ static inline void check_timer(void) * Ok, does IRQ0 through the IOAPIC work? */ unmask_IO_APIC_irq(0); - if (timer_irq_works()) { + if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); @@ -1671,6 +1673,13 @@ static inline void check_timer(void) panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); } +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + /* * * IRQ's that are handled by the PIC in the MPS IOAPIC case. -- cgit v1.2.1 From 2df9fa36643f03b0462b170515c1e221c3709fa9 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 20 May 2005 14:27:59 -0700 Subject: [PATCH] x86_64: i386/x86-64: Export cpu_core_map Needed for the powernow k8 driver for dual core support. Signed-off-by: Andi Kleen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/smpboot.c | 1 + arch/x86_64/kernel/smpboot.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index cbea7ac582e5..35bfe138cb1a 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -888,6 +888,7 @@ void *xquad_portio; cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_core_map); static void __init smp_boot_cpus(unsigned int max_cpus) { diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 5abdee1e16a5..f1ec0f345941 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -94,6 +94,7 @@ int smp_threads_ready; cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_core_map); /* * Trampoline 80x86 program as an array. -- cgit v1.2.1 From 1263cc67c09bc7f913a6877f3ba0427f0b76617e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 23 May 2005 10:03:52 +1000 Subject: [PATCH] ppc64: Fix booting on latest G5 models The latest speedbumped Apple G5 models have a "bug" in the Open Firmware device tree that lacks the proper interrupt routing information for the northbridge i2c controller. Apple's driver silently falls back into a sub-optimal "polled" mode (heh, maybe they didn't even notice the bug because of that :), our driver didn't properly check and crashes :( This patch fixes our driver to not crash, and adds code to the prom_init() OF trampoline code that detects the "bug" and adds the missing information back for this chipset revision. This fixes booting and thermal control on these models. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 44 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 35ec42de962e..6f79b7b9b445 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1750,7 +1750,44 @@ static void __init flatten_device_tree(void) prom_printf("Device tree struct 0x%x -> 0x%x\n", RELOC(dt_struct_start), RELOC(dt_struct_end)); - } +} + + +static void __init fixup_device_tree(void) +{ + unsigned long offset = reloc_offset(); + phandle u3, i2c, mpic; + u32 u3_rev; + u32 interrupts[2]; + u32 parent; + + /* Some G5s have a missing interrupt definition, fix it up here */ + u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); + if ((long)u3 <= 0) + return; + i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); + if ((long)i2c <= 0) + return; + mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); + if ((long)mpic <= 0) + return; + + /* check if proper rev of u3 */ + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0) + return; + if (u3_rev != 0x35) + return; + /* does it need fixup ? */ + if (prom_getproplen(i2c, "interrupts") > 0) + return; + /* interrupt on this revision of u3 is number 0 and level */ + interrupts[0] = 0; + interrupts[1] = 1; + prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + parent = (u32)mpic; + prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); +} + static void __init prom_find_boot_cpu(void) { @@ -1919,6 +1956,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end))); } + /* + * Fixup any known bugs in the device-tree + */ + fixup_device_tree(); + /* * Now finally create the flattened device-tree */ -- cgit v1.2.1 From e16fa6b9d2ad9467cf5bdf517e6b6f45e5867ad6 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 23 May 2005 12:29:56 -0500 Subject: [PATCH] ppc32: Fix an off-by-one error in ipic_init There is an off-by-one error in the IPIC code that configures the external interrupts (Edge or Level Sensitive). Signed-off-by: Randy Vinson Signed-off-by: Kumar Gala Signed-off-by: Linus Torvalds --- arch/ppc/syslib/ipic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c index acb2cde3171f..580ed658e872 100644 --- a/arch/ppc/syslib/ipic.c +++ b/arch/ppc/syslib/ipic.c @@ -479,7 +479,7 @@ void __init ipic_init(phys_addr_t phys_addr, temp = 0; for (i = 0 ; i < senses_count ; i++) { if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { - temp |= 1 << (16 - i); + temp |= 1 << (15 - i); if (i != 0) irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; else -- cgit v1.2.1 From f10d20c1f192aa90fc935207f22da32462e793ee Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 23 May 2005 16:54:14 +1000 Subject: [PATCH] ppc64: Fix g5 hw timebase sync The hardware sync of the timebase on SMP G5s uses a black magic incantation to the i2c clock chip that was inspired from what Darwin does. However, this was an earlier version of Darwin that was ... buggy ! heh. This causes the latest models to break though when starting SMP, so it's worth fixing. Here's a new version of the incantation based on careful transcription of the said incantations as found in the latest version of apple's temple. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/pmac_smp.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c index c27588ede2fe..a23de37227bf 100644 --- a/arch/ppc64/kernel/pmac_smp.c +++ b/arch/ppc64/kernel/pmac_smp.c @@ -68,6 +68,7 @@ extern struct smp_ops_t *smp_ops; static void (*pmac_tb_freeze)(int freeze); static struct device_node *pmac_tb_clock_chip_host; +static u8 pmac_tb_pulsar_addr; static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase; @@ -106,12 +107,9 @@ static void smp_core99_pulsar_tb_freeze(int freeze) u8 data; int rc; - /* Strangely, the device-tree says address is 0xd2, but darwin - * accesses 0xd0 ... - */ pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_read, + pmac_tb_pulsar_addr | pmac_low_i2c_read, 0x2e, &data, 1); if (rc != 0) goto bail; @@ -120,7 +118,7 @@ static void smp_core99_pulsar_tb_freeze(int freeze) pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_write, + pmac_tb_pulsar_addr | pmac_low_i2c_write, 0x2e, &data, 1); bail: if (rc != 0) { @@ -185,6 +183,12 @@ static int __init smp_core99_probe(void) if (ncpus <= 1) return 1; + /* HW sync only on these platforms */ + if (!machine_is_compatible("PowerMac7,2") && + !machine_is_compatible("PowerMac7,3") && + !machine_is_compatible("RackMac3,1")) + goto nohwsync; + /* Look for the clock chip */ for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) { struct device_node *p = of_get_parent(cc); @@ -198,11 +202,18 @@ static int __init smp_core99_probe(void) goto next; switch (*reg) { case 0xd2: - pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); + if (device_is_compatible(cc, "pulsar-legacy-slewing")) { + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd2; + printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + } else if (device_is_compatible(cc, "cy28508")) { + pmac_tb_freeze = smp_core99_cypress_tb_freeze; + printk(KERN_INFO "Timebase clock is Cypress chip\n"); + } break; case 0xd4: pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd4; printk(KERN_INFO "Timebase clock is Pulsar chip\n"); break; } @@ -210,12 +221,15 @@ static int __init smp_core99_probe(void) pmac_tb_clock_chip_host = p; smp_ops->give_timebase = smp_core99_give_timebase; smp_ops->take_timebase = smp_core99_take_timebase; + of_node_put(cc); + of_node_put(p); break; } next: of_node_put(p); } + nohwsync: mpic_request_ipis(); return ncpus; -- cgit v1.2.1 From 816242da3735957bee99aeba40aa60c4f120a101 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 23 May 2005 15:52:08 -0700 Subject: [SPARC64]: Add boot option to force UltraSPARC-III P-Cache on. Older UltraSPARC-III chips have a P-Cache bug that makes us disable it by default at boot time. However, this does hurt performance substantially, particularly with memcpy(), and the bug is _incredibly_ obscure. I have never seen it triggered in practice, ever. So provide a "-P" boot option that forces the P-Cache on. It taints the kernel, so if it does trigger and cause some data corruption or OOPS, we will find out in the logs that this option was on when it happened. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 11 +++++++++++ arch/sparc64/kernel/smp.c | 3 +++ arch/sparc64/kernel/traps.c | 19 +++++++++++++++++++ 3 files changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 12c3d84b7460..b7e6a91952b2 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -383,6 +383,17 @@ static void __init process_switch(char c) /* Use PROM debug console. */ register_console(&prom_debug_console); break; + case 'P': + /* Force UltraSPARC-III P-Cache on. */ + if (tlb_type != cheetah) { + printk("BOOT: Ignoring P-Cache force option.\n"); + break; + } + cheetah_pcache_forced_on = 1; + add_taint(TAINT_MACHINE_CHECK); + cheetah_enable_pcache(); + break; + default: printk("Unknown boot switch (-%c)\n", c); break; diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 6dff06a44e76..e5b9c7a27789 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -123,6 +123,9 @@ void __init smp_callin(void) smp_setup_percpu_timer(); + if (cheetah_pcache_forced_on) + cheetah_enable_pcache(); + local_irq_enable(); calibrate_delay(); diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 56b203a2af69..a9f4596d7c2b 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -421,6 +421,25 @@ asmlinkage void cee_log(unsigned long ce_status, } } +int cheetah_pcache_forced_on; + +void cheetah_enable_pcache(void) +{ + unsigned long dcr; + + printk("CHEETAH: Enabling P-Cache on cpu %d.\n", + smp_processor_id()); + + __asm__ __volatile__("ldxa [%%g0] %1, %0" + : "=r" (dcr) + : "i" (ASI_DCU_CONTROL_REG)); + dcr |= (DCU_PE | DCU_HPE | DCU_SPE | DCU_SL); + __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (dcr), "i" (ASI_DCU_CONTROL_REG)); +} + /* Cheetah error trap handling. */ static unsigned long ecache_flush_physbase; static unsigned long ecache_flush_linesize; -- cgit v1.2.1 From 6431e6a28e8df423e1ebcda065e9ff086198d2c6 Mon Sep 17 00:00:00 2001 From: Dominik Hackl Date: Tue, 24 May 2005 19:29:46 -0700 Subject: [PATCH] voyager_smp.c static inline fix This patch fixes a compile bug by moving a static inline function to the right place. The body of a static inline function has to be declared before the use of this function. Signed-off-by: Dominik Hackl Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mach-voyager/voyager_smp.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 903d739ca74a..a6e0ddd65bd0 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -97,7 +97,6 @@ static void ack_vic_irq(unsigned int irq); static void vic_enable_cpi(void); static void do_boot_cpu(__u8 cpuid); static void do_quad_bootstrap(void); -static inline void wrapper_smp_local_timer_interrupt(struct pt_regs *); int hard_smp_processor_id(void); @@ -125,6 +124,14 @@ send_QIC_CPI(__u32 cpuset, __u8 cpi) } } +static inline void +wrapper_smp_local_timer_interrupt(struct pt_regs *regs) +{ + irq_enter(); + smp_local_timer_interrupt(regs); + irq_exit(); +} + static inline void send_one_CPI(__u8 cpu, __u8 cpi) { @@ -1249,14 +1256,6 @@ smp_vic_timer_interrupt(struct pt_regs *regs) smp_local_timer_interrupt(regs); } -static inline void -wrapper_smp_local_timer_interrupt(struct pt_regs *regs) -{ - irq_enter(); - smp_local_timer_interrupt(regs); - irq_exit(); -} - /* local (per CPU) timer interrupt. It does both profiling and * process statistics/rescheduling. * -- cgit v1.2.1 From 8f80e5c911465743ccd3a328f992c7d8aaebf1e8 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 25 May 2005 13:41:26 +1000 Subject: [PATCH] ppc64: fix initialisation of gettimeofday calculations On PPC64, we keep track of when we need to update jiffies (and the variables used to calculate the time of day) based on the time base. If the time base frequence is sufficiently high compared to the processor clock frequency, then it is possible for the time of day variables to be corrupted at the time of the first decrementer interrupt we take. This became obvious on a legacy iSeries where the time base frequency is the same as the processor clock. This one line patch fixes the initialisation so that the time of day variables and the indicator we use to tell when updates are due are better synchronised. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/time.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 772a465b49f9..3d54745108c7 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -515,6 +515,7 @@ void __init time_init(void) do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_stamp; + get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy; do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; -- cgit v1.2.1 From d0e8e29100c9866878d43bbb40ca17e8fe429851 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 25 May 2005 16:29:26 +1000 Subject: [PATCH] ppc64 iSeries: fix boot time setting For quite a while, there has existed a hypervisor bug on legacy iSeries which means that we do not get the boot time set in the kernel. This patch works around that bug. This was most noticable when the root partition needed to be checked at every boot as the kernel thought it was some time in 1905 until user mode reset the time correctly. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/mf.c | 85 +++++++++++++++++++++++++++++++++++++------------ arch/ppc64/kernel/rtc.c | 39 +---------------------- 2 files changed, 66 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c index 1bd52ece497c..5aca7e8005a8 100644 --- a/arch/ppc64/kernel/mf.c +++ b/arch/ppc64/kernel/mf.c @@ -1,7 +1,7 @@ /* * mf.c * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation + * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation * * This modules exists as an interface between a Linux secondary partition * running on an iSeries and the primary partition's Virtual Service @@ -36,10 +36,12 @@ #include #include +#include #include #include #include #include +#include /* * This is the structure layout for the Machine Facilites LPAR event @@ -696,36 +698,23 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) complete(&rtc->com); } -int mf_get_rtc(struct rtc_time *tm) +static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) { - struct ce_msg_comp_data ce_complete; - struct rtc_time_data rtc_data; - int rc; - - memset(&ce_complete, 0, sizeof(ce_complete)); - memset(&rtc_data, 0, sizeof(rtc_data)); - init_completion(&rtc_data.com); - ce_complete.handler = &get_rtc_time_complete; - ce_complete.token = &rtc_data; - rc = signal_ce_msg_simple(0x40, &ce_complete); - if (rc) - return rc; - wait_for_completion(&rtc_data.com); tm->tm_wday = 0; tm->tm_yday = 0; tm->tm_isdst = 0; - if (rtc_data.rc) { + if (rc) { tm->tm_sec = 0; tm->tm_min = 0; tm->tm_hour = 0; tm->tm_mday = 15; tm->tm_mon = 5; tm->tm_year = 52; - return rtc_data.rc; + return rc; } - if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) || - (rtc_data.ce_msg.ce_msg[2] == 0xaf)) { + if ((ce_msg[2] == 0xa9) || + (ce_msg[2] == 0xaf)) { /* TOD clock is not set */ tm->tm_sec = 1; tm->tm_min = 1; @@ -736,7 +725,6 @@ int mf_get_rtc(struct rtc_time *tm) mf_set_rtc(tm); } { - u8 *ce_msg = rtc_data.ce_msg.ce_msg; u8 year = ce_msg[5]; u8 sec = ce_msg[6]; u8 min = ce_msg[7]; @@ -765,6 +753,63 @@ int mf_get_rtc(struct rtc_time *tm) return 0; } +int mf_get_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + init_completion(&rtc_data.com); + ce_complete.handler = &get_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + wait_for_completion(&rtc_data.com); + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + +struct boot_rtc_time_data { + int busy; + struct ce_msg_data ce_msg; + int rc; +}; + +static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) +{ + struct boot_rtc_time_data *rtc = token; + + memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); + rtc->rc = 0; + rtc->busy = 0; +} + +int mf_get_boot_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct boot_rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + rtc_data.busy = 1; + ce_complete.handler = &get_boot_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + /* We need to poll here as we are not yet taking interrupts */ + while (rtc_data.busy) { + extern unsigned long lpevent_count; + struct ItLpQueue *lpq = get_paca()->lpqueue_ptr; + if (lpq && ItLpQueue_isLpIntPending(lpq)) + lpevent_count += ItLpQueue_process(lpq, NULL); + } + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + int mf_set_rtc(struct rtc_time *tm) { char ce_time[12]; diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index 3e70b91375fc..67989055a9fe 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -292,47 +292,10 @@ int iSeries_set_rtc_time(struct rtc_time *tm) void iSeries_get_boot_time(struct rtc_time *tm) { - unsigned long time; - static unsigned long lastsec = 1; - - u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart)); - u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1); - int year = 1970; - int year1 = ( dataWord1 >> 24 ) & 0x000000FF; - int year2 = ( dataWord1 >> 16 ) & 0x000000FF; - int sec = ( dataWord1 >> 8 ) & 0x000000FF; - int min = dataWord1 & 0x000000FF; - int hour = ( dataWord2 >> 24 ) & 0x000000FF; - int day = ( dataWord2 >> 8 ) & 0x000000FF; - int mon = dataWord2 & 0x000000FF; - if ( piranha_simulator ) return; - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year1); - BCD_TO_BIN(year2); - year = year1 * 100 + year2; - - time = mktime(year, mon, day, hour, min, sec); - time += ( jiffies / HZ ); - - /* Now THIS is a nasty hack! - * It ensures that the first two calls get different answers. - * That way the loop in init_time (time.c) will not think - * the clock is stuck. - */ - if ( lastsec ) { - time -= lastsec; - --lastsec; - } - - to_tm(time, tm); - tm->tm_year -= 1900; + mf_get_boot_rtc(tm); tm->tm_mon -= 1; } #endif -- cgit v1.2.1 From 4f60fdf613536402e3313c5019b3ae6060b2ae4a Mon Sep 17 00:00:00 2001 From: Alexander Nyberg Date: Wed, 25 May 2005 12:31:28 -0700 Subject: [PATCH] x86_64: CONFIG_BUG=n fixes Fixes some !CONFIG_BUG warnings: include/asm/mmu_context.h: I funktion `switch_mm': include/asm/mmu_context.h:57: varning: implicit declaration of function `out_of_line_bug' Signed-off-by: Alexander Nyberg Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/traps.c | 2 ++ arch/x86_64/kernel/x8664_ksyms.c | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 65a37f52c56e..3dfec8fdabcd 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -332,10 +332,12 @@ void handle_BUG(struct pt_regs *regs) printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", f.filename, f.line); } +#ifdef CONFIG_BUG void out_of_line_bug(void) { BUG(); } +#endif static DEFINE_SPINLOCK(die_lock); static int die_owner = -1; diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index a43dedb58fa2..68ec03070e5a 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -193,8 +193,9 @@ EXPORT_SYMBOL(smp_num_siblings); extern void do_softirq_thunk(void); EXPORT_SYMBOL(do_softirq_thunk); -void out_of_line_bug(void); +#ifdef CONFIG_BUG EXPORT_SYMBOL(out_of_line_bug); +#endif EXPORT_SYMBOL(init_level4_pgt); -- cgit v1.2.1 From d11cf326bd5e785cc5a3f5a3d3f4e3a5522f4fb7 Mon Sep 17 00:00:00 2001 From: Zhang Yanmin Date: Sun, 22 May 2005 17:47:00 -0700 Subject: [IA64] sys_mmap doesn't follow posix.1 when parameter len=0 In IA64 kernel, sys_mmap calls do_mmap2 and do_mmap2 returns addr if len=0, which means the mmap sys call succeeds. Posix.1 says: The mmap() function shall fail if: [EINVAL] The value of len is zero. Here is a patch to fix it. Signed-off-by: Zhang Yanmin Acked-by: David Mosberger Signed-off-by: Tony Luck --- arch/ia64/kernel/sys_ia64.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c index a8cf6d8a509c..770fab37928e 100644 --- a/arch/ia64/kernel/sys_ia64.c +++ b/arch/ia64/kernel/sys_ia64.c @@ -182,13 +182,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un } } - /* - * A zero mmap always succeeds in Linux, independent of whether or not the - * remaining arguments are valid. - */ - if (len == 0) - goto out; - /* Careful about overflows.. */ len = PAGE_ALIGN(len); if (!len || len > TASK_SIZE) { -- cgit v1.2.1 From 25be5e6ccc5c9cab77012fabbb72520f9b6e4618 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 27 May 2005 04:21:50 -0400 Subject: [PATCH] VIA IRQ quirk Delete quirk_via_bridge(), restore quirk_via_irqpic() -- but now improved to be invoked upon device ENABLE, and now only for VIA devices -- not all devices behind VIA bridges. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/pci/irq.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index d6598da4b67b..da21b1d07c15 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -1029,7 +1029,6 @@ void pcibios_penalize_isa_irq(int irq) static int pirq_enable_irq(struct pci_dev *dev) { u8 pin; - extern int via_interrupt_line_quirk; struct pci_dev *temp_dev; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); @@ -1084,10 +1083,6 @@ static int pirq_enable_irq(struct pci_dev *dev) printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", 'A' + pin, pci_name(dev), msg); } - /* VIA bridges use interrupt line for apic/pci steering across - the V-Link */ - else if (via_interrupt_line_quirk) - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15); return 0; } -- cgit v1.2.1 From 8aadff7dd519800ce7c0e7fb75dcd4438b373134 Mon Sep 17 00:00:00 2001 From: Alexander Nyberg Date: Fri, 27 May 2005 12:48:50 +0200 Subject: [PATCH] Note on ACPI build fix Even after the previous fix you can still set CONFIG_ACPI_BOOT indirectly even without CONFIG_ACPI by choosing CONFIG_PCI and CONFIG_PCI_MMCONFIG. That doesn't build very well either. This makes PCI_MMCONFIG depend on ACPI, fixing that hole. [ I guess in theory Kconfig could follow the whole chain of dependencies for things that get selected, but that sounds insanely complicated, so we'll just fix up these things by hand. --Linus ] Signed-off-by: Alexander Nyberg Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 2 +- arch/x86_64/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index e382f32d435e..dfd904f6883b 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1163,7 +1163,7 @@ config PCI_DIRECT config PCI_MMCONFIG bool - depends on PCI && (PCI_GOMMCONFIG || (PCI_GOANY && ACPI)) + depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) select ACPI_BOOT default y diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 82cb2a3f127a..0f430d9d3632 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -421,7 +421,7 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" - depends on PCI + depends on PCI && ACPI select ACPI_BOOT config UNORDERED_IO -- cgit v1.2.1 From c5924b7d97430657fa07ebf1a208c7e8cf135ef3 Mon Sep 17 00:00:00 2001 From: Oliver Korpilla Date: Fri, 27 May 2005 12:52:55 -0700 Subject: [PATCH] x86_64: signal.c build fix For unspecified reasons, arch/x86_64/kernel/signal.c apparently needs ia32_unistd.h. Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/signal.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index 3fdcdba0fec5..429c0269dc4e 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -28,6 +28,7 @@ #include #include #include +#include /* #define DEBUG_SIG 1 */ -- cgit v1.2.1 From d6649bc76a57523209a6b2ee4844c9078a4dd8bb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 27 May 2005 12:52:56 -0700 Subject: [PATCH] ppc32: small cpufreq update This patch adds a missing attribute to pmac cpufreq so that "scaling_available_frequencies" works. It also cleans up the duplicate definitions for low and high speed constants. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: John Clemens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/pmac_cpufreq.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index f7fb2786cd50..48e482c8bd0d 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -85,14 +85,11 @@ static int no_schedule; static int has_cpu_l2lve; -#define PMAC_CPU_LOW_SPEED 1 -#define PMAC_CPU_HIGH_SPEED 0 - /* There are only two frequency states for each processor. Values * are in kHz for the time being. */ -#define CPUFREQ_HIGH PMAC_CPU_HIGH_SPEED -#define CPUFREQ_LOW PMAC_CPU_LOW_SPEED +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {CPUFREQ_HIGH, 0}, @@ -100,6 +97,11 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static inline void local_delay(unsigned long ms) { if (no_schedule) @@ -355,7 +357,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) static unsigned long prev_l3cr; freqs.old = cur_freq; - freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; freqs.cpu = smp_processor_id(); if (freqs.old == freqs.new) @@ -363,7 +365,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == PMAC_CPU_LOW_SPEED && + if (speed_mode == CPUFREQ_LOW && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if (l3cr & L3CR_L3E) { @@ -371,8 +373,8 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) _set_L3CR(0); } } - set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED); - if (speed_mode == PMAC_CPU_HIGH_SPEED && + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) @@ -380,7 +382,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) } if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; return 0; } @@ -423,7 +425,8 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = cur_freq; - return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]); + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); } static u32 __pmac read_gpio(struct device_node *np) @@ -457,7 +460,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) no_schedule = 1; sleep_freq = cur_freq; if (cur_freq == low_freq) - do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(CPUFREQ_HIGH, 0); return 0; } @@ -473,8 +476,8 @@ static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy) * is that we force a switch to whatever it was, which is * probably high speed due to our suspend() routine */ - do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED - : PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); no_schedule = 0; return 0; @@ -488,6 +491,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = { .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, .name = "powermac", .owner = THIS_MODULE, }; -- cgit v1.2.1 From 70ffc71c5c42c8ac62d951e80d9799bd5764f2f5 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 27 May 2005 12:52:59 -0700 Subject: [PATCH] arch/i386/kernel/cpu/intel_cacheinfo.c: section fix num_cache_leaves is used in __devexit cache_remove_dev() and can therefore not be __devinit. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/intel_cacheinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index aeb5b4ef8c8b..a710dc4eb20e 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -118,7 +118,7 @@ struct _cpuid4_info { }; #define MAX_CACHE_LEAVES 4 -static unsigned short __devinitdata num_cache_leaves; +static unsigned short num_cache_leaves; static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { -- cgit v1.2.1 From 49f384b82b03416dd7e4fc77847a959fe3247362 Mon Sep 17 00:00:00 2001 From: "Siddha, Suresh B" Date: Fri, 27 May 2005 12:53:01 -0700 Subject: [PATCH] x86: fix smp_num_siblings on buggy BIOSes This fixes 'smp_num_siblings' value on the systems with a buggy bios, which sets number of siblings to '2' even when HT is disabled. (more details are at http://bugzilla.kernel.org/show_bug.cgi?id=4359) I am planning to do more cleanup in this area (like moving smp_num_siblings to per cpuinfo) shortly. Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/smpboot.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 35bfe138cb1a..bc1bb6919e6a 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1074,8 +1074,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus) cpu_set(cpu, cpu_sibling_map[cpu]); } - if (siblings != smp_num_siblings) + if (siblings != smp_num_siblings) { printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings); + smp_num_siblings = siblings; + } if (c->x86_num_cores > 1) { for (i = 0; i < NR_CPUS; i++) { -- cgit v1.2.1 From b16eeb47292597a8bf3ad53fdaf1f727f57bd8e4 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 27 May 2005 12:53:02 -0700 Subject: [PATCH] ppc32: Fix cpufreq vs. sleep issue Recent kernels occasionally trigger a PMU timeout on some mac laptops, typically on wakeup from sleep. This seem to be caused by either a too big latency caused by the cpufreq switch on wakeup from sleep or by an interrupt beeing lost due to the reset of the interrupt controller done during wakeup. This patch makes that code more robust by stopping PMU auto poll activity around cpufreq changes on machines that use the PMU for such changes (long latency switching involving a CPU hard reset and flush of all caches) and by removing the reset of the open pic interrupt controller on wakeup (that can cause the loss of an interrupt and Darwin doesn't do it, so it must not be necessary). Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/pmac_cpufreq.c | 4 ++++ arch/ppc/syslib/open_pic.c | 4 +--- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index 48e482c8bd0d..937f46df711e 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -271,6 +271,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) #ifdef DEBUG_FREQ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); #endif + pmu_suspend(); + /* Disable all interrupt sources on openpic */ pic_prio = openpic_get_priority(); openpic_set_priority(0xf); @@ -345,6 +347,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) debug_calc_bogomips(); #endif + pmu_resume(); + preempt_enable(); return 0; diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 9d4ed68b5804..000ba47c67cb 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -275,7 +275,7 @@ static void __init openpic_enable_sie(void) } #endif -#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM) +#if defined(CONFIG_EPIC_SERIAL_MODE) static void openpic_reset(void) { openpic_setfield(&OpenPIC->Global.Global_Configuration0, @@ -993,8 +993,6 @@ int openpic_resume(struct sys_device *sysdev) return 0; } - openpic_reset(); - /* OpenPIC sometimes seem to need some time to be fully back up... */ do { openpic_set_spurious(OPENPIC_VEC_SPURIOUS); -- cgit v1.2.1 From b9e0d0696c9e86d4e40b23039feefb8c377cb524 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 28 May 2005 15:51:53 -0700 Subject: [PATCH] uml: fix a couple of warnings Eliminate an unused variable warning in ptrace.c and a size mismatch warning by adding a cast to __pa. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/ptrace.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 2925e15324de..71af4d503899 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -322,11 +322,9 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) UPT_SYSCALL_ARG2(regs), UPT_SYSCALL_ARG3(regs), UPT_SYSCALL_ARG4(regs)); - else { - int res = UPT_SYSCALL_RET(regs); - audit_syscall_exit(current, AUDITSC_RESULT(res), - res); - } + else audit_syscall_exit(current, + AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), + UPT_SYSCALL_RET(regs)); } /* Fake a debug trap */ @@ -356,14 +354,3 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) current->exit_code = 0; } } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.1 From 6770cb61ff6d557613a8382b28f9b0a919fb112f Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 28 May 2005 15:51:54 -0700 Subject: [PATCH] uml: turn off kmalloc always on a fatal signal We should turn off kmalloc when getting a fatal signal regardless of the mode we're in. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index a17c49703f9b..939e3b708670 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -71,7 +71,7 @@ static __init void do_uml_initcalls(void) static void last_ditch_exit(int sig) { - CHOOSE_MODE(kmalloc_ok = 0, (void) 0); + kmalloc_ok = 0; signal(SIGINT, SIG_DFL); signal(SIGTERM, SIG_DFL); signal(SIGHUP, SIG_DFL); -- cgit v1.2.1 From a2e4b972c99685d9d7b869c4bf8d8b258ff5b60c Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 28 May 2005 15:51:54 -0700 Subject: [PATCH] uml: remove 2_5compat.h Remove old useless header that was used in Ye Olde Times during 2.4->2.5 porting to abstract differences. It's definitions are no more used anyway, so let's finally kill it. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/ssl.c | 1 - arch/um/drivers/stdio_console.c | 1 - arch/um/drivers/ubd_kern.c | 1 - arch/um/include/2_5compat.h | 24 ------------------------ arch/um/kernel/exec_kern.c | 1 - arch/um/kernel/process_kern.c | 2 -- arch/um/kernel/trap_kern.c | 1 - 7 files changed, 31 deletions(-) delete mode 100644 arch/um/include/2_5compat.h (limited to 'arch') diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index a2bac429f3d4..b32a77010fbe 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -22,7 +22,6 @@ #include "init.h" #include "irq_user.h" #include "mconsole_kern.h" -#include "2_5compat.h" static int ssl_version = 1; diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 361d0be342b3..afbe1e71ed83 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -28,7 +28,6 @@ #include "irq_user.h" #include "mconsole_kern.h" #include "init.h" -#include "2_5compat.h" #define MAX_TTYS (16) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 88f956c34fed..7e98e3e168c1 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -49,7 +49,6 @@ #include "irq_user.h" #include "irq_kern.h" #include "ubd_user.h" -#include "2_5compat.h" #include "os.h" #include "mem.h" #include "mem_kern.h" diff --git a/arch/um/include/2_5compat.h b/arch/um/include/2_5compat.h deleted file mode 100644 index abdb015a4d71..000000000000 --- a/arch/um/include/2_5compat.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __2_5_COMPAT_H__ -#define __2_5_COMPAT_H__ - -#define INIT_HARDSECT(arr, maj, sizes) - -#define SET_PRI(task) do ; while(0) - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c index 49ddabe69be7..efd222ffe20e 100644 --- a/arch/um/kernel/exec_kern.c +++ b/arch/um/kernel/exec_kern.c @@ -16,7 +16,6 @@ #include "kern.h" #include "irq_user.h" #include "tlb.h" -#include "2_5compat.h" #include "os.h" #include "time_user.h" #include "choose-mode.h" diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index c1adf7ba3fd1..ccb6dd6565ec 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -43,7 +43,6 @@ #include "tlb.h" #include "frame_kern.h" #include "sigcontext.h" -#include "2_5compat.h" #include "os.h" #include "mode.h" #include "mode_kern.h" @@ -189,7 +188,6 @@ void default_idle(void) while(1){ /* endless idle loop with no priority at all */ - SET_PRI(current); /* * although we are an idle CPU, we do not want to diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 1de22d8a313a..c20aef120598 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -23,7 +23,6 @@ #include "kern.h" #include "chan_kern.h" #include "mconsole_kern.h" -#include "2_5compat.h" #include "mem.h" #include "mem_kern.h" -- cgit v1.2.1 From 0894e27e7999bdbad2e65734caa1d5de65e7d890 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 28 May 2005 15:51:55 -0700 Subject: [PATCH] uml: single-space a help message One of the ubd driver help strings was bust. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/ubd_kern.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 7e98e3e168c1..2a7f6892c55c 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -439,9 +439,9 @@ static int udb_setup(char *str) __setup("udb", udb_setup); __uml_help(udb_setup, "udb\n" -" This option is here solely to catch ubd -> udb typos, which can be\n\n" -" to impossible to catch visually unless you specifically look for\n\n" -" them. The only result of any option starting with 'udb' is an error\n\n" +" This option is here solely to catch ubd -> udb typos, which can be\n" +" to impossible to catch visually unless you specifically look for\n" +" them. The only result of any option starting with 'udb' is an error\n" " in the boot output.\n\n" ); -- cgit v1.2.1 From 92515da73a5df50db45111b8659ac463b4800236 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 28 May 2005 15:51:56 -0700 Subject: [PATCH] uml: fix segfault on exit with CONFIG_GCOV We need to disable signals on exit in all cases, not just when rebooting. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/main.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index 939e3b708670..e42e6364ca13 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -87,7 +87,7 @@ int main(int argc, char **argv, char **envp) { char **new_argv; sigset_t mask; - int ret, i; + int ret, i, err; /* Enable all signals except SIGIO - in some environments, we can * enter with some signals blocked @@ -160,27 +160,29 @@ int main(int argc, char **argv, char **envp) */ change_sig(SIGPROF, 0); - /* Reboot */ - if(ret){ - int err; - - printf("\n"); + /* This signal stuff used to be in the reboot case. However, + * sometimes a SIGVTALRM can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ - /* stop timers and set SIG*ALRM to be ignored */ - disable_timer(); + /* stop timers and set SIG*ALRM to be ignored */ + disable_timer(); - /* disable SIGIO for the fds and set SIGIO to be ignored */ - err = deactivate_all_fds(); - if(err) - printf("deactivate_all_fds failed, errno = %d\n", - -err); + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if(err) + printf("deactivate_all_fds failed, errno = %d\n", -err); - /* Let any pending signals fire now. This ensures - * that they won't be delivered after the exec, when - * they are definitely not expected. - */ - unblock_signals(); + /* Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); + /* Reboot */ + if(ret){ + printf("\n"); execvp(new_argv[0], new_argv); perror("Failed to exec kernel"); ret = 1; -- cgit v1.2.1 From 7590d3ec1cda7d504c25103bde0c9911f93810e9 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 28 May 2005 15:51:57 -0700 Subject: [PATCH] uml: remove unused code This removes two now unused files and a couple of unused functions. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/initrd_kern.c | 59 ------------------------------------------- arch/um/kernel/initrd_user.c | 46 --------------------------------- arch/um/kernel/process_kern.c | 34 ------------------------- 3 files changed, 139 deletions(-) delete mode 100644 arch/um/kernel/initrd_kern.c delete mode 100644 arch/um/kernel/initrd_user.c (limited to 'arch') diff --git a/arch/um/kernel/initrd_kern.c b/arch/um/kernel/initrd_kern.c deleted file mode 100644 index fc568af468b9..000000000000 --- a/arch/um/kernel/initrd_kern.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include "linux/init.h" -#include "linux/bootmem.h" -#include "linux/initrd.h" -#include "asm/types.h" -#include "user_util.h" -#include "kern_util.h" -#include "initrd.h" -#include "init.h" -#include "os.h" - -/* Changed by uml_initrd_setup, which is a setup */ -static char *initrd __initdata = NULL; - -static int __init read_initrd(void) -{ - void *area; - long long size; - int err; - - if(initrd == NULL) return 0; - err = os_file_size(initrd, &size); - if(err) return 0; - area = alloc_bootmem(size); - if(area == NULL) return 0; - if(load_initrd(initrd, area, size) == -1) return 0; - initrd_start = (unsigned long) area; - initrd_end = initrd_start + size; - return 0; -} - -__uml_postsetup(read_initrd); - -static int __init uml_initrd_setup(char *line, int *add) -{ - initrd = line; - return 0; -} - -__uml_setup("initrd=", uml_initrd_setup, -"initrd=\n" -" This is used to boot UML from an initrd image. The argument is the\n" -" name of the file containing the image.\n\n" -); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/initrd_user.c b/arch/um/kernel/initrd_user.c deleted file mode 100644 index cb90681e151c..000000000000 --- a/arch/um/kernel/initrd_user.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include -#include -#include -#include - -#include "user_util.h" -#include "kern_util.h" -#include "user.h" -#include "initrd.h" -#include "os.h" - -int load_initrd(char *filename, void *buf, int size) -{ - int fd, n; - - fd = os_open_file(filename, of_read(OPENFLAGS()), 0); - if(fd < 0){ - printk("Opening '%s' failed - err = %d\n", filename, -fd); - return(-1); - } - n = os_read_file(fd, buf, size); - if(n != size){ - printk("Read of %d bytes from '%s' failed, err = %d\n", size, - filename, -n); - return(-1); - } - - os_close_file(fd); - return(0); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index ccb6dd6565ec..804c6bbdf67c 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -54,18 +54,6 @@ */ struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } }; -struct task_struct *get_task(int pid, int require) -{ - struct task_struct *ret; - - read_lock(&tasklist_lock); - ret = find_task_by_pid(pid); - read_unlock(&tasklist_lock); - - if(require && (ret == NULL)) panic("get_task couldn't find a task\n"); - return(ret); -} - int external_pid(void *t) { struct task_struct *task = t ? t : current; @@ -210,11 +198,6 @@ int page_size(void) return(PAGE_SIZE); } -unsigned long page_mask(void) -{ - return(PAGE_MASK); -} - void *um_virt_to_phys(struct task_struct *task, unsigned long addr, pte_t *pte_out) { @@ -347,11 +330,6 @@ char *uml_strdup(char *string) return(new); } -void *get_init_task(void) -{ - return(&init_thread_union.thread_info.task); -} - int copy_to_user_proc(void __user *to, void *from, int size) { return(copy_to_user(to, from, size)); @@ -478,15 +456,3 @@ unsigned long arch_align_stack(unsigned long sp) return sp & ~0xf; } #endif - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.1 From 567b56508f7367e161d6d861ef214a900ab45ce9 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sat, 28 May 2005 15:51:58 -0700 Subject: [PATCH] uml: add MOD_LICENSE to random driver Add a MODULE_LICENSE("GPL") to the driver, remove some unused macros and add the GPL license (it's GPL-licensed anyway since it's a GPL-derivative, apart that Jeff Dike releases GPL software, in case anybody is wondering). Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/random.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index d43e9fab05a7..f9e22198e011 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -1,5 +1,10 @@ -/* Much of this ripped from hw_random.c */ - +/* Copyright (C) 2005 Jeff Dike */ +/* Much of this ripped from drivers/char/hw_random.c, see there for other + * copyright. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + */ #include #include #include @@ -12,8 +17,6 @@ */ #define RNG_VERSION "1.0.0" #define RNG_MODULE_NAME "random" -#define RNG_DRIVER_NAME RNG_MODULE_NAME " virtual driver " RNG_VERSION -#define PFX RNG_MODULE_NAME ": " #define RNG_MISCDEV_MINOR 183 /* official */ @@ -98,7 +101,7 @@ static int __init rng_init (void) err = misc_register (&rng_miscdev); if (err) { - printk (KERN_ERR PFX "misc device register failed\n"); + printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n"); goto err_out_cleanup_hw; } @@ -120,3 +123,6 @@ static void __exit rng_cleanup (void) module_init (rng_init); module_exit (rng_cleanup); + +MODULE_DESCRIPTION("UML Host Random Number Generator (RNG) driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From 37fce857bec00d26d0e8251c909da2bd8736c949 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sat, 28 May 2005 15:51:59 -0700 Subject: [PATCH] uml: split CONFIG_FRAME_POINTER from DEBUG_INFO Until now, FRAME_POINTER was set = DEBUG_INFO for UML. Change it to be the default way, so that it can be enabled alone (for instance to get better backtraces on crashes). The call-trace dumper which uses the frame pointer is not yet in, I'm going to introduce it in a separate patch. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Kconfig.debug | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index b89989de364d..bd41e4286d0d 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -2,10 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config FRAME_POINTER - bool - default y if DEBUG_INFO - config PT_PROXY bool "Enable ptrace proxy" depends on XTERM_CHAN && DEBUG_INFO && MODE_TT -- cgit v1.2.1 From b3461034d7d46455060c8476910be22b6b0fc313 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sat, 28 May 2005 15:52:00 -0700 Subject: [PATCH] uml: stack dump fix Copy (and adapt) to UML the stack code dumper used in i386 when CONFIG_FRAME_POINTER is enabled. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/sysrq.h | 3 +- arch/um/kernel/sysrq.c | 21 ++++++++---- arch/um/sys-i386/sysrq.c | 80 +++++++++++++++++++++++++++++++++++++++++++++- arch/um/sys-ppc/sysrq.c | 14 +------- arch/um/sys-x86_64/sysrq.c | 11 +------ 5 files changed, 97 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/um/include/sysrq.h b/arch/um/include/sysrq.h index 2ce9423460b3..c8d332b56b98 100644 --- a/arch/um/include/sysrq.h +++ b/arch/um/include/sysrq.h @@ -1,6 +1,7 @@ #ifndef __UM_SYSRQ_H #define __UM_SYSRQ_H -extern void show_trace(unsigned long *stack); +struct task_struct; +extern void show_trace(struct task_struct* task, unsigned long *stack); #endif diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index e630438f9e73..f80850091e79 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -3,6 +3,7 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/sched.h" #include "linux/kernel.h" #include "linux/module.h" @@ -12,14 +13,14 @@ #include "sysrq.h" #include "user_util.h" -void show_trace(unsigned long * stack) +/* Catch non-i386 SUBARCH's. */ +#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT) +void show_trace(struct task_struct *task, unsigned long * stack) { - /* XXX: Copy the CONFIG_FRAME_POINTER stack-walking backtrace from - * arch/i386/kernel/traps.c, and then move this to sys-i386/sysrq.c.*/ unsigned long addr; if (!stack) { - stack = (unsigned long*) &stack; + stack = (unsigned long*) &stack; WARN_ON(1); } @@ -35,6 +36,7 @@ void show_trace(unsigned long * stack) } printk("\n"); } +#endif /* * stack dumps generator - this is used by arch-independent code. @@ -44,7 +46,7 @@ void dump_stack(void) { unsigned long stack; - show_trace(&stack); + show_trace(current, &stack); } EXPORT_SYMBOL(dump_stack); @@ -59,7 +61,11 @@ void show_stack(struct task_struct *task, unsigned long *esp) int i; if (esp == NULL) { - if (task != current) { + if (task != current && task != NULL) { + /* XXX: Isn't this bogus? I.e. isn't this the + * *userspace* stack of this task? If not so, use this + * even when task == current (as in i386). + */ esp = (unsigned long *) KSTK_ESP(task); /* Which one? No actual difference - just coding style.*/ //esp = (unsigned long *) PT_REGS_IP(&task->thread.regs); @@ -77,5 +83,6 @@ void show_stack(struct task_struct *task, unsigned long *esp) printk("%08lx ", *stack++); } - show_trace(esp); + printk("Call Trace: \n"); + show_trace(current, esp); } diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c index 281fc7b8ca00..e3706d15c4f5 100644 --- a/arch/um/sys-i386/sysrq.c +++ b/arch/um/sys-i386/sysrq.c @@ -3,12 +3,15 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/kernel.h" #include "linux/smp.h" #include "linux/sched.h" +#include "linux/kallsyms.h" #include "asm/ptrace.h" #include "sysrq.h" +/* This is declared by */ void show_regs(struct pt_regs *regs) { printk("\n"); @@ -31,5 +34,80 @@ void show_regs(struct pt_regs *regs) 0xffff & PT_REGS_DS(regs), 0xffff & PT_REGS_ES(regs)); - show_trace((unsigned long *) ®s); + show_trace(NULL, (unsigned long *) ®s); } + +/* Copied from i386. */ +static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) +{ + return p > (void *)tinfo && + p < (void *)tinfo + THREAD_SIZE - 3; +} + +/* Adapted from i386 (we also print the address we read from). */ +static inline unsigned long print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long ebp) +{ + unsigned long addr; + +#ifdef CONFIG_FRAME_POINTER + while (valid_stack_ptr(tinfo, (void *)ebp)) { + addr = *(unsigned long *)(ebp + 4); + printk("%08lx: [<%08lx>]", ebp + 4, addr); + print_symbol(" %s", addr); + printk("\n"); + ebp = *(unsigned long *)ebp; + } +#else + while (valid_stack_ptr(tinfo, stack)) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + } +#endif + return ebp; +} + +void show_trace(struct task_struct* task, unsigned long * stack) +{ + unsigned long ebp; + struct thread_info *context; + + /* Turn this into BUG_ON if possible. */ + if (!stack) { + stack = (unsigned long*) &stack; + printk("show_trace: got NULL stack, implicit assumption task == current"); + WARN_ON(1); + } + + if (!task) + task = current; + + if (task != current) { + //ebp = (unsigned long) KSTK_EBP(task); + /* Which one? No actual difference - just coding style.*/ + ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs); + } else { + asm ("movl %%ebp, %0" : "=r" (ebp) : ); + } + + context = (struct thread_info *) + ((unsigned long)stack & (~(THREAD_SIZE - 1))); + print_context_stack(context, stack, ebp); + + /*while (((long) stack & (THREAD_SIZE-1)) != 0) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + }*/ + printk("\n"); +} + diff --git a/arch/um/sys-ppc/sysrq.c b/arch/um/sys-ppc/sysrq.c index 82d6e9335bb6..2f816f1a0ff4 100644 --- a/arch/um/sys-ppc/sysrq.c +++ b/arch/um/sys-ppc/sysrq.c @@ -27,17 +27,5 @@ void show_regs(struct pt_regs_subarch *regs) 0xffff & regs->xds, 0xffff & regs->xes); #endif - show_trace(®s->gpr[1]); + show_trace(current, ®s->gpr[1]); } - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c index ddf74691a610..d0a25af19a5b 100644 --- a/arch/um/sys-x86_64/sysrq.c +++ b/arch/um/sys-x86_64/sysrq.c @@ -36,14 +36,5 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { __show_regs(regs); - show_trace((unsigned long *) ®s); + show_trace(current, (unsigned long *) ®s); } - -/* Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.1 From f767b02f35a3db5c1b1c6454992c070510cef07f Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sat, 28 May 2005 15:52:03 -0700 Subject: [PATCH] uml: fixlet for arch_prctl_skas Fix it a bit (after some cross checking with "man arch_prctl"). There were: *) typos FS/GS and back *) FS in place of FS_BASE (and the same for GS) *) the procedure used put_user on &addr, where addr was the parameter (i.e. changed its param with put_user, completely useless) rather than interpreting addr as a pointer, as requested in this case (see the man page). Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/sys-x86_64/syscalls.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index d4a59657fb99..6f44f40204ed 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -133,23 +133,27 @@ static long arch_prctl_tt(int code, unsigned long addr) #ifdef CONFIG_MODE_SKAS +/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */ static long arch_prctl_skas(int code, unsigned long addr) { long ret = 0; switch(code){ - case ARCH_SET_GS: - current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; - break; case ARCH_SET_FS: current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr; break; + case ARCH_SET_GS: + current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; + break; case ARCH_GET_FS: - ret = put_user(current->thread.regs.regs.skas.regs[GS / sizeof(unsigned long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[FS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; case ARCH_GET_GS: - ret = put_user(current->thread.regs.regs.skas.regs[FS / sizeof(unsigned \ -long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[GS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; default: ret = -EINVAL; -- cgit v1.2.1 From 8e21683bb458c73c6fe87844202a64eac730995e Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sat, 28 May 2005 15:52:04 -0700 Subject: [PATCH] uml: remove jail mode + other leftovers This var is currently useless, as it's apparent from reading the code. Until 2.6.11 it was used in some code related to jail mode, in the same proc.: if(jail){ while(!reading) sched_yield(); } jail mode has been dropped, together with that use, so let's finish dropping this. Also, remove some other useless definitions I met. Acked-by: Jeff Dike Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/tt/process_kern.c | 8 +------- arch/um/kernel/um_arch.c | 6 ------ 2 files changed, 1 insertion(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c index df810ca8fc12..776310fd5b8b 100644 --- a/arch/um/kernel/tt/process_kern.c +++ b/arch/um/kernel/tt/process_kern.c @@ -32,10 +32,6 @@ void *switch_to_tt(void *prev, void *next, void *last) unsigned long flags; int err, vtalrm, alrm, prof, cpu; char c; - /* jailing and SMP are incompatible, so this doesn't need to be - * made per-cpu - */ - static int reading; from = prev; to = next; @@ -59,13 +55,11 @@ void *switch_to_tt(void *prev, void *next, void *last) c = 0; set_current(to); - reading = 0; err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c)); if(err != sizeof(c)) panic("write of switch_pipe failed, err = %d", -err); - reading = 1; - if(from->thread.mode.tt.switch_pipe[0] == -1) + if(from->thread.mode.tt.switch_pipe[0] == -1) os_kill_process(os_getpid(), 0); err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c)); diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 4d10ec372a67..418427107b29 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -111,12 +111,6 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -pte_t * __bad_pagetable(void) -{ - panic("Someone should implement __bad_pagetable"); - return(NULL); -} - /* Set in linux_main */ unsigned long host_task_size; unsigned long task_size; -- cgit v1.2.1 From 94b9f46d61904422c498bf4cf9a90cc14398d311 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:05 -0700 Subject: [PATCH] ppc32: Fix uImage make target to report success correctly The existing make rule when building a uImage would check to see if the image file existed to report 'is ready' or 'not made'. However make appeared to compute the file list before the rule was executed. Signed-off-by: Chris Clark Signed-off-by: Kumar Gala Signed-off-by: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/boot/images/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index f850fb0fb511..c9ac5f5fa9e4 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -22,7 +22,8 @@ targets += uImage $(obj)/uImage: $(obj)/vmlinux.gz $(Q)rm -f $@ $(call if_changed,uimage) - @echo ' Image: $@' $(if $(wildcard $@),'is ready','not made') + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi # Files generated that shall be removed upon make clean clean-files := sImage vmapus vmlinux* miboot* zImage* uImage -- cgit v1.2.1 From 252fcaed48fc5473b3fc3cafbf977244b0cbf670 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:06 -0700 Subject: [PATCH] ppc32: Fix some minor issues related to FSL Book-E KGDB support Some debug registers needed to be initialized early on to allow proper support for KGDB. Additionally, we need to setup the ppc.md_early_serial_map function pointer on boards that have serial support for KGDB. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/head_fsl_booke.S | 15 ++++++++++++++- arch/ppc/platforms/85xx/mpc8540_ads.c | 3 +++ arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 3 +++ arch/ppc/platforms/85xx/sbc8560.c | 3 +++ 4 files changed, 23 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index f22ddce36135..ce36e88ba627 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -232,7 +232,8 @@ skpinv: addi r6,r6,1 /* Increment */ tlbwe /* 7. Jump to KERNELBASE mapping */ - li r7,0 + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l bl 1f /* Find our address */ 1: mflr r9 rlwimi r6,r9,0,20,31 @@ -293,6 +294,18 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_HID0, r2 #endif +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + lis r2,DBCR0_IDM@h + mtspr SPRN_DBCR0,r2 + /* clear any residual debug events */ + li r2,-1 + mtspr SPRN_DBSR,r2 +#endif + /* * This is where the main kernel code starts. */ diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 4d857d6d633d..583838ab02d8 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -210,6 +210,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc8540ads_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 6c020d67ad70..11fb758d269f 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -459,6 +459,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 9ab05e590c3e..7b9e1543e175 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -221,6 +221,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = sbc8560_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("sbc8560_init(): exit", 0); -- cgit v1.2.1 From ed36959621451da7195be83b87878b060ce64724 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:07 -0700 Subject: [PATCH] ppc32: Add VIA IDE support to MPC8555 CDS platform Add support for the VIA IDE controller that exists on the MPC8555 CDS system. Updated the config for the system to enable support by default. Signed-off-by: Scott Hall Signed-off-by: Kumar Gala Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/configs/mpc8555_cds_defconfig | 117 ++++++++++++++++++----- arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 138 ++++++++++++++++++++++++++- arch/ppc/platforms/85xx/mpc85xx_cds_common.h | 3 + arch/ppc/syslib/Makefile | 2 +- arch/ppc/syslib/ppc85xx_setup.c | 16 ++++ 5 files changed, 248 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig index 728bd9e1a8fa..15abebf46b96 100644 --- a/arch/ppc/configs/mpc8555_cds_defconfig +++ b/arch/ppc/configs/mpc8555_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:25:35 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 17 11:56:01 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -62,10 +67,12 @@ CONFIG_CC_ALIGN_JUMPS=0 CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set CONFIG_PPC_GEN550=y +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -76,6 +83,7 @@ CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPC8555_CDS=y # CONFIG_MPC8560_ADS is not set # CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set CONFIG_MPC8555=y CONFIG_85xx_PCI2=y @@ -90,6 +98,7 @@ CONFIG_CPM2=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -104,10 +113,6 @@ CONFIG_PCI_NAMES=y # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # Advanced setup # @@ -180,7 +185,59 @@ CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -220,7 +277,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -369,14 +425,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - # # Input Device Drivers # @@ -386,6 +434,13 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + # # Character devices # @@ -406,6 +461,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -433,6 +489,11 @@ CONFIG_GEN_RTC=y # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + # # I2C support # @@ -456,11 +517,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -483,7 +544,9 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -494,9 +557,11 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -506,10 +571,12 @@ CONFIG_I2C_MPC=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -538,7 +605,6 @@ CONFIG_I2C_MPC=y # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -548,13 +614,9 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -585,6 +647,10 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -646,7 +712,6 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -698,7 +763,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_KGDB_CONSOLE is not set # CONFIG_SERIAL_TEXT_DEBUG is not set diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 11fb758d269f..c2a512735183 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include @@ -181,6 +182,7 @@ void __init mpc85xx_cds_init_IRQ(void) { bd_t *binfo = (bd_t *) __res; + int i; /* Determine the Physical Address of the OpenPIC regs */ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; @@ -198,6 +200,13 @@ mpc85xx_cds_init_IRQ(void) */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); + openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); + + for (i = 0; i < NUM_8259_INTERRUPTS; i++) + irq_desc[i].handler = &i8259_pic; + + i8259_init(0); + #ifdef CONFIG_CPM2 /* Setup CPM2 PIC */ cpm2_init_IRQ(); @@ -231,7 +240,7 @@ mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * interrupt on slot */ { { 0, 1, 2, 3 }, /* 16 - PMC */ - { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ { 0, 1, 2, 3 }, /* 18 - Slot 1 */ { 1, 2, 3, 0 }, /* 19 - Slot 2 */ { 2, 3, 0, 1 }, /* 20 - Slot 3 */ @@ -280,13 +289,135 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_DEVICE_NOT_FOUND; #endif /* We explicitly do not go past the Tundra 320 Bridge */ - if (bus == 1) + if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } + +void __init +mpc85xx_cds_enable_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* Configure P2P so that we can reach bus 1 */ + early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0); + early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1); + early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* Enable USB and IDE functions */ + early_write_config_byte(hose, 1, 0x10, 0x48, 0x08); +} + +void __init +mpc85xx_cds_fixup_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* + * Force the backplane P2P bridge to have a window + * open from 0x00000000-0x00001fff in PCI I/O space. + * This allows legacy I/O (i8259, etc) on the VIA + * southbridge to be accessed. + */ + early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00); + early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000); + early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10); + early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* + * Since the P2P window was forced to cover the fixed + * legacy I/O addresses, it is necessary to manually + * place the base addresses for the IDE and USB functions + * within this window. + */ + /* Function 1, IDE */ + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0); + + /* Function 2, USB ports 0-1 */ + early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0); + + /* Function 3, USB ports 2-3 */ + early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80); + + /* Function 5, Power Management */ + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8); + + /* Function 6, AC97 Interface */ + early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00); +} + +void __init +mpc85xx_cds_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + u_char c; + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, NULL))) { + /* + * U-Boot does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, &c); + c |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, c); + + /* + * Since only primary interface works, force the + * IDE function to standard primary IDE interrupt + * w/ 8259 offset + */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* + * Force legacy USB interrupt routing + */ + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, NULL))) { + dev->irq = 10; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + } + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, dev))) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + } +} #endif /* CONFIG_PCI */ TODC_ALLOC(); @@ -308,6 +439,9 @@ mpc85xx_cds_setup_arch(void) printk("mpc85xx_cds_setup_arch\n"); + /* VIA IDE configuration */ + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + #ifdef CONFIG_CPM2 cpm2_reset(); #endif diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 7627d77504bd..12b292c6ae32 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -77,4 +77,7 @@ #define MPC85XX_PCI2_IO_SIZE 0x01000000 +#define NR_8259_INTS 16 +#define CPM_IRQ_OFFSET NR_8259_INTS + #endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dd418ea3426c..46cbb3e39d4c 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -97,7 +97,7 @@ obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ - ppc_sys.o mpc85xx_sys.o \ + ppc_sys.o i8259.o mpc85xx_sys.o \ mpc85xx_devices.o ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index 152c3ef1312a..f3277f469e78 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -132,6 +132,12 @@ mpc85xx_halt(void) } #ifdef CONFIG_PCI + +#if defined(CONFIG_MPC8555_CDS) +extern void mpc85xx_cds_enable_via(struct pci_controller *hose); +extern void mpc85xx_cds_fixup_via(struct pci_controller *hose); +#endif + static void __init mpc85xx_setup_pci1(struct pci_controller *hose) { @@ -302,8 +308,18 @@ mpc85xx_setup_hose(void) ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#if defined(CONFIG_MPC8555_CDS) + /* Pre pciauto_bus_scan VIA init */ + mpc85xx_cds_enable_via(hose_a); +#endif + hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); +#if defined(CONFIG_MPC8555_CDS) + /* Post pciauto_bus_scan VIA fixup */ + mpc85xx_cds_fixup_via(hose_a); +#endif + #ifdef CONFIG_85xx_PCI2 hose_b = pcibios_alloc_controller(); -- cgit v1.2.1 From a6dbba77a9d4b47c60d60c4f07fa79b3ca93a1d5 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Sat, 28 May 2005 15:52:09 -0700 Subject: [PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge This patch adds on-chip PCI bridge support for the PQ2 family. The incomplete existent code is updated with interrupt handling stuff and board-specific bits for 8272ADS and PQ2FADS; the related files were renamed (from m8260_pci to m82xx_pci) to be of more generic fashion. This is tested with 8266ADS and 8272ADS, should work on PQ2FADS as well. Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/Kconfig | 4 +- arch/ppc/platforms/pq2ads.h | 41 ++-- arch/ppc/syslib/Makefile | 2 +- arch/ppc/syslib/m8260_pci.c | 193 ------------------ arch/ppc/syslib/m8260_pci.h | 76 ------- arch/ppc/syslib/m8260_pci_erratum9.c | 10 +- arch/ppc/syslib/m8260_setup.c | 11 +- arch/ppc/syslib/m82xx_pci.c | 383 +++++++++++++++++++++++++++++++++++ arch/ppc/syslib/m82xx_pci.h | 92 +++++++++ 9 files changed, 510 insertions(+), 302 deletions(-) delete mode 100644 arch/ppc/syslib/m8260_pci.c delete mode 100644 arch/ppc/syslib/m8260_pci.h create mode 100644 arch/ppc/syslib/m82xx_pci.c create mode 100644 arch/ppc/syslib/m82xx_pci.h (limited to 'arch') diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 600f23d7fd33..6e6377a69d5b 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -1143,12 +1143,12 @@ config PCI_QSPAN config PCI_8260 bool - depends on PCI && 8260 && !8272 + depends on PCI && 8260 default y config 8260_PCI9 bool " Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 + depends on PCI_8260 && !ADS8272 default y choice diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h index cf5e5dd06d63..067d9a5aebc1 100644 --- a/arch/ppc/platforms/pq2ads.h +++ b/arch/ppc/platforms/pq2ads.h @@ -49,10 +49,10 @@ /* PCI interrupt controller */ #define PCI_INT_STAT_REG 0xF8200000 #define PCI_INT_MASK_REG 0xF8200004 -#define PIRQA (NR_SIU_INTS + 0) -#define PIRQB (NR_SIU_INTS + 1) -#define PIRQC (NR_SIU_INTS + 2) -#define PIRQD (NR_SIU_INTS + 3) +#define PIRQA (NR_CPM_INTS + 0) +#define PIRQB (NR_CPM_INTS + 1) +#define PIRQC (NR_CPM_INTS + 2) +#define PIRQD (NR_CPM_INTS + 3) /* * PCI memory map definitions for MPC8266ADS-PCI. @@ -68,28 +68,23 @@ * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory */ -/* window for a PCI master to access MPC8266 memory */ -#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */ -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h + Here we should redefine what is unique for this board */ +#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ +#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ +#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ -/* window for the processor to access PCI memory with prefetching */ -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ +#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ -/* window for the processor to access PCI memory without prefetching */ -#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#if defined(CONFIG_ADS8272) +#define PCI_INT_TO_SIU SIU_INT_IRQ2 +#elif defined(CONFIG_PQ2FADS) +#define PCI_INT_TO_SIU SIU_INT_IRQ6 +#else +#warning PCI Bridge will be without interrupts support +#endif -/* window for the processor to access PCI I/O */ -#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ - -#define _IO_BASE PCI_MSTR_IO_LOCAL -#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL -#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS #endif /* CONFIG_PCI */ #endif /* __MACH_ADS8260_DEFS */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 46cbb3e39d4c..96acf85800d4 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ todc_time.o obj-$(CONFIG_8260) += m8260_setup.o -obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o +obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o ifeq ($(CONFIG_PPC_GEN550),y) diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c deleted file mode 100644 index 057cc3f8ff37..000000000000 --- a/arch/ppc/syslib/m8260_pci.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 Red Hat, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "m8260_pci.h" - - -/* PCI bus configuration registers. - */ - -static void __init m8260_setup_pci(struct pci_controller *hose) -{ - volatile cpm2_map_t *immap = cpm2_immr; - unsigned long pocmr; - u16 tempShort; - -#ifndef CONFIG_ATC /* already done in U-Boot */ - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000; -#endif - - /* Make PCI lowest priority */ - /* Each 4 bits is a device bus request and the MS 4bits - is highest priority */ - /* Bus 4bit value - --- ---------- - CPM high 0b0000 - CPM middle 0b0001 - CPM low 0b0010 - PCI reguest 0b0011 - Reserved 0b0100 - Reserved 0b0101 - Internal Core 0b0110 - External Master 1 0b0111 - External Master 2 0b1000 - External Master 3 0b1001 - The rest are reserved */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; - - /* Park bus on core while modifying PCI Bus accesses */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6; - - /* - * Set up master window that allows the CPU to access PCI space. This - * window is set up using the first SIU PCIBR registers. - */ - immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK; - immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE; - - /* Disable machine check on no response or target abort */ - immap->im_pci.pci_emr = cpu_to_le32(0x1fe7); - /* Release PCI RST (by default the PCI RST signal is held low) */ - immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); - - /* give it some time */ - mdelay(1); - - /* - * Set up master window that allows the CPU to access PCI Memory (prefetch) - * space. This window is set up using the first set of Outbound ATU registers. - */ - immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12); - immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN); - - /* - * Set up master window that allows the CPU to access PCI Memory (non-prefetch) - * space. This window is set up using the second set of Outbound ATU registers. - */ - immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12); - immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE); - - /* - * Set up master window that allows the CPU to access PCI IO space. This window - * is set up using the third set of Outbound ATU registers. - */ - immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12); - immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12); - pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO); - - /* - * Set up slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - - immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12); - immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12); - pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff; - immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN); - - /* See above for description - puts PCI request as highest priority */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; - - /* Park the bus on the PCI */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; - - /* Host mode - specify the bridge as a host-PCI bridge */ - early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST); - - /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ - early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort); - early_write_config_word(hose, 0, 0, PCI_COMMAND, - tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -void __init m8260_find_bridges(void) -{ - extern int pci_assign_all_busses; - struct pci_controller * hose; - - pci_assign_all_busses = 1; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - ppc_md.pci_swizzle = common_swizzle; - - hose->first_busno = 0; - hose->bus_offset = 0; - hose->last_busno = 0xff; - - setup_m8260_indirect_pci(hose, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); - - m8260_setup_pci(hose); - hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET; - - hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE, - MPC826x_PCI_IO_SIZE); - isa_io_base = (unsigned long) hose->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose->mem_resources[0], - MPC826x_PCI_LOWER_MEM, - MPC826x_PCI_UPPER_MEM, - IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); - - pci_init_resource(&hose->mem_resources[1], - MPC826x_PCI_LOWER_MMIO, - MPC826x_PCI_UPPER_MMIO, - IORESOURCE_MEM, "PCI memory"); - - pci_init_resource(&hose->io_resource, - MPC826x_PCI_LOWER_IO, - MPC826x_PCI_UPPER_IO, - IORESOURCE_IO, "PCI I/O"); -} diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h deleted file mode 100644 index d1352120acd7..000000000000 --- a/arch/ppc/syslib/m8260_pci.h +++ /dev/null @@ -1,76 +0,0 @@ - -#ifndef _PPC_KERNEL_M8260_PCI_H -#define _PPC_KERNEL_M8260_PCI_H - -#include - -/* - * Local->PCI map (from CPU) controlled by - * MPC826x master window - * - * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0 - * - * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) - * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) - * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3) - * - * PCI->Local map (from PCI) - * MPC826x slave window controlled by - * - * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) - */ - -/* - * Slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - -#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL -#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) -#endif - -/* - * This is the window that allows the CPU to access PCI address space. - * It will be setup with the SIU PCIBR0 register. All three PCI master - * windows, which allow the CPU to access PCI prefetch, non prefetch, - * and IO space (see below), must all fit within this window. - */ -#ifndef MPC826x_PCI_BASE -#define MPC826x_PCI_BASE 0x80000000 -#define MPC826x_PCI_MASK 0xc0000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MEM -#define MPC826x_PCI_LOWER_MEM 0x80000000 -#define MPC826x_PCI_UPPER_MEM 0x9fffffff -#define MPC826x_PCI_MEM_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MMIO -#define MPC826x_PCI_LOWER_MMIO 0xa0000000 -#define MPC826x_PCI_UPPER_MMIO 0xafffffff -#define MPC826x_PCI_MMIO_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_IO -#define MPC826x_PCI_LOWER_IO 0x00000000 -#define MPC826x_PCI_UPPER_IO 0x00ffffff -#define MPC826x_PCI_IO_BASE 0xb0000000 -#define MPC826x_PCI_IO_SIZE 0x01000000 -#endif - -#ifndef _IO_BASE -#define _IO_BASE isa_io_base -#endif - -#ifdef CONFIG_8260_PCI9 -struct pci_controller; -extern void setup_m8260_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data); -#else -#define setup_m8260_indirect_pci setup_indirect_pci -#endif - -#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 9c0582d639e0..1dc7e4e1d491 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -31,7 +31,7 @@ #include #include -#include "m8260_pci.h" +#include "m82xx_pci.h" #ifdef CONFIG_8260_PCI9 /*#include */ /* included in asm/io.h */ @@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le); static inline int is_pci_mem(unsigned long addr) { - if (addr >= MPC826x_PCI_LOWER_MMIO && - addr <= MPC826x_PCI_UPPER_MMIO) + if (addr >= M82xx_PCI_LOWER_MMIO && + addr <= M82xx_PCI_UPPER_MMIO) return 1; - if (addr >= MPC826x_PCI_LOWER_MEM && - addr <= MPC826x_PCI_UPPER_MEM) + if (addr >= M82xx_PCI_LOWER_MEM && + addr <= M82xx_PCI_UPPER_MEM) return 1; return 0; } diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 23ea3f694de2..fda75d79050c 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -34,7 +34,8 @@ unsigned char __res[sizeof(bd_t)]; extern void cpm2_reset(void); -extern void m8260_find_bridges(void); +extern void pq2_find_bridges(void); +extern void pq2pci_init_irq(void); extern void idma_pci9_init(void); /* Place-holder for board-specific init */ @@ -56,7 +57,7 @@ m8260_setup_arch(void) idma_pci9_init(); #endif #ifdef CONFIG_PCI_8260 - m8260_find_bridges(); + pq2_find_bridges(); #endif #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -173,6 +174,12 @@ m8260_init_IRQ(void) * in case the boot rom changed something on us. */ cpm2_immr->im_intctl.ic_siprr = 0x05309770; + +#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS)) + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2pci_init_irq(); +#endif + } /* diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c new file mode 100644 index 000000000000..5e7a7edcea74 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.c @@ -0,0 +1,383 @@ +/* + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 Red Hat, Inc. + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "m82xx_pci.h" + +/* + * Interrupt routing + */ + +static inline int +pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */ + { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */ + { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */ + }; + + const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void +pq2pci_mask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_unmask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +static void +pq2pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_end_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type pq2pci_ic = { + "PQ2 PCI", + NULL, + NULL, + pq2pci_unmask_irq, + pq2pci_mask_irq, + pq2pci_mask_and_ack, + pq2pci_end_irq, + 0 +}; + +static irqreturn_t +pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for(;;) { + stat = *(volatile unsigned long *) PCI_INT_STAT_REG; + mask = *(volatile unsigned long *) PCI_INT_MASK_REG; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(NR_CPM_INTS + bit, regs); + } + } + + return IRQ_HANDLED; +} + +static struct irqaction pq2pci_irqaction = { + .handler = pq2pci_irq_demux, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "PQ2 PCI cascade", +}; + + +void +pq2pci_init_irq(void) +{ + int irq; + volatile cpm2_map_t *immap = cpm2_immr; +#if defined CONFIG_ADS8272 + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; +#elif defined CONFIG_PQ2FADS + immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or8 = 0xffff8010; +#endif + for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) + irq_desc[irq].handler = &pq2pci_ic; + + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= + ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000; + + /* install the demultiplexer for the PCI cascade interrupt */ + setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction); + return; +} + +static int +pq2pci_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} + +/* PCI bus configuration registers. + */ +static void +pq2ads_setup_pci(struct pci_controller *hose) +{ + __u32 val; + volatile cpm2_map_t *immap = cpm2_immr; + bd_t* binfo = (bd_t*) __res; + u32 sccr = immap->im_clkrst.car_sccr; + uint pci_div,freq,time; + /* PCI int lowest prio */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved + */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; + /* park bus on core */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE; + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + + immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE; + immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE; + +#ifdef M82xx_PCI_SEC_WND_SIZE + immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE; + immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; +#endif + +#if defined CONFIG_ADS8272 + immap->im_siu_conf.siu_82xx.sc_siumcr = + (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | + SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | + SIUMCR_LBPC11 | SIUMCR_APPC11 | + SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | + SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | + SIUMCR_APPC10 | SIUMCR_CS10PC00 | + SIUMCR_BCTLC00 | SIUMCR_MMR11 ; + +#elif defined CONFIG_PQ2FADS + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; +#endif + /* Enable PCI */ + immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); + + pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * + ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div)); + time = (int)666666/freq; + /* due to PCI Local Bus spec, some devices needs to wait such a long + time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */ + printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq, + (time==1) ? "0.5 seconds":"1 second" ); + + { + int i; + for(i=0;i<(500*time);i++) + udelay(1000); + } + + /* setup ATU registers */ + immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO | + ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT); + + /* Set-up non-prefetchable window */ + immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT); + + /* Set-up prefetchable window */ + immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN | + (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT); + + /* Inbound transactions from PCI memory space */ + immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN | + ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT)); + immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); + immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); + +#if defined CONFIG_ADS8272 + /* PCI int highest prio */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; +#elif defined CONFIG_PQ2FADS + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; +#endif + /* park bus on PCI */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Enable bus mastering and inbound memory transactions */ + early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val); + +} + +void __init pq2_find_bridges(void) +{ + extern int pci_assign_all_busses; + struct pci_controller * hose; + int host_bridge; + + pci_assign_all_busses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + ppc_md.pci_swizzle = common_swizzle; + + hose->first_busno = 0; + hose->bus_offset = 0; + hose->last_busno = 0xff; + +#ifdef CONFIG_ADS8272 + hose->set_cfg_type = 1; +#endif + + setup_m8260_indirect_pci(hose, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); + + /* Make sure it is a supported bridge */ + early_read_config_dword(hose, + 0, + PCI_DEVFN(0,0), + PCI_VENDOR_ID, + &host_bridge); + switch (host_bridge) { + case PCI_DEVICE_ID_MPC8265: + break; + case PCI_DEVICE_ID_MPC8272: + break; + default: + printk("Attempting to use unrecognized host bridge ID" + " 0x%08x.\n", host_bridge); + break; + } + + pq2ads_setup_pci(hose); + + hose->io_space.start = M82xx_PCI_LOWER_IO; + hose->io_space.end = M82xx_PCI_UPPER_IO; + hose->mem_space.start = M82xx_PCI_LOWER_MEM; + hose->mem_space.end = M82xx_PCI_UPPER_MMIO; + hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET; + + isa_io_base = + (unsigned long) ioremap(M82xx_PCI_IO_BASE, + M82xx_PCI_IO_SIZE); + hose->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose->mem_resources[0], + M82xx_PCI_LOWER_MEM, + M82xx_PCI_UPPER_MEM, + IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); + + pci_init_resource(&hose->mem_resources[1], + M82xx_PCI_LOWER_MMIO, + M82xx_PCI_UPPER_MMIO, + IORESOURCE_MEM, "PCI memory"); + + pci_init_resource(&hose->io_resource, + M82xx_PCI_LOWER_IO, + M82xx_PCI_UPPER_IO, + IORESOURCE_IO | 1, "PCI I/O"); + + ppc_md.pci_exclude_device = pq2pci_exclude_device; + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_map_irq = pq2pci_map_irq; + ppc_md.pcibios_fixup = NULL; + ppc_md.pcibios_fixup_bus = NULL; + +} diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h new file mode 100644 index 000000000000..924f73f8e595 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.h @@ -0,0 +1,92 @@ + +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +#include +/* + * Local->PCI map (from CPU) controlled by + * MPC826x master window + * + * 0xF6000000 - 0xF7FFFFFF IO space + * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0 + * + * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) + * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) + * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3) + * + * PCI->Local map (from PCI) + * MPC826x slave window controlled by + * + * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) + */ + +/* + * Slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + +#ifndef M82xx_PCI_SLAVE_MEM_LOCAL +#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) +#endif + +/* + * This is the window that allows the CPU to access PCI address space. + * It will be setup with the SIU PCIBR0 register. All three PCI master + * windows, which allow the CPU to access PCI prefetch, non prefetch, + * and IO space (see below), must all fit within this window. + */ + +#ifndef M82xx_PCI_LOWER_MEM +#define M82xx_PCI_LOWER_MEM 0x80000000 +#define M82xx_PCI_UPPER_MEM 0x9fffffff +#define M82xx_PCI_MEM_OFFSET 0x00000000 +#define M82xx_PCI_MEM_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_MMIO +#define M82xx_PCI_LOWER_MMIO 0xa0000000 +#define M82xx_PCI_UPPER_MMIO 0xafffffff +#define M82xx_PCI_MMIO_OFFSET 0x00000000 +#define M82xx_PCI_MMIO_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_IO +#define M82xx_PCI_LOWER_IO 0x00000000 +#define M82xx_PCI_UPPER_IO 0x01ffffff +#define M82xx_PCI_IO_BASE 0xf6000000 +#define M82xx_PCI_IO_SIZE 0x02000000 +#endif + +#ifndef M82xx_PCI_PRIM_WND_SIZE +#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U) +#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE) +#endif + +#ifndef M82xx_PCI_SEC_WND_SIZE +#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U) +#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM) +#endif + +#ifndef POTA_ADDR_SHIFT +#define POTA_ADDR_SHIFT 12 +#endif + +#ifndef PITA_ADDR_SHIFT +#define PITA_ADDR_SHIFT 12 +#endif + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#ifdef CONFIG_8260_PCI9 +struct pci_controller; +extern void setup_m8260_indirect_pci(struct pci_controller* hose, + u32 cfg_addr, u32 cfg_data); +#else +#define setup_m8260_indirect_pci setup_indirect_pci +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ -- cgit v1.2.1 From 91f9855a7afbb160ba1709bf342858732138abad Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:12 -0700 Subject: [PATCH] ppc32: Fix building MPC8555 CDS when CONFIG_PCI is disabled The patch that introduced support for the VIA chipset broke building if CONFIG_PCI is disabled. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index c2a512735183..3ac0321eed03 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -439,9 +439,6 @@ mpc85xx_cds_setup_arch(void) printk("mpc85xx_cds_setup_arch\n"); - /* VIA IDE configuration */ - ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - #ifdef CONFIG_CPM2 cpm2_reset(); #endif @@ -462,6 +459,9 @@ mpc85xx_cds_setup_arch(void) loops_per_jiffy = freq / HZ; #ifdef CONFIG_PCI + /* VIA IDE configuration */ + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + /* setup PCI host bridges */ mpc85xx_setup_hose(); #endif -- cgit v1.2.1 From 92b4dc16257fef814ddf1c8d1d2a20f67f67ee4b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:13 -0700 Subject: [PATCH] ppc32: Simplified load string emulation error checking The error checking for emulation of load string instructions was overly generous and would cause certain valid forms of the instructions to be treated as illegal. We drop the range checking since the architecture allows this to be boundedly undefined. Tests on CPUs that support these instructions appear not do cause illegal instruction traps on range errors and just allow the execution to occur. Thanks to Kim Phillips for debugging this and figuring out what real HW was doing. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/traps.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f8e7e324a173..c65731e8bc65 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -408,12 +408,7 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) /* Early out if we are an invalid form of lswx */ if ((instword & INST_STRING_MASK) == INST_LSWX) - if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB)) - return -EINVAL; - - /* Early out if we are an invalid form of lswi */ - if ((instword & INST_STRING_MASK) == INST_LSWI) - if ((rA >= rT) || (rT == rA)) + if ((rT == rA) || (rT == NB_RB)) return -EINVAL; EA = (rA == 0) ? 0 : regs->gpr[rA]; -- cgit v1.2.1 From ff945023c6a455679165b14d298316e262ceeb1f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:14 -0700 Subject: [PATCH] ppc32: MPC834x BCSR_SIZE too small for use in a BAT. The call to io_block_mapping was creating an invalid BAT entry because the value of BCSR_SIZE (32K) is too small to be used in a BAT (128K min). This change removes the io_block_mapping call since these registers can easily be mapped using ioremap at the point of use. Signed-off-by: Randy Vinson Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/83xx/mpc834x_sys.c | 1 - arch/ppc/platforms/83xx/mpc834x_sys.h | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index b3b0f51979d2..e6348b5a1ddc 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -127,7 +127,6 @@ mpc834x_sys_map_io(void) { /* we steal the lowest ioremap addr for virt space */ io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO); - io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO); } int diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index f4d055ae19c1..49db0f4c847e 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -26,7 +26,6 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_VIRT_ADDR ((uint)0xfe100000) #define BCSR_SIZE ((uint)(32 * 1024)) #ifdef CONFIG_PCI -- cgit v1.2.1 From f9e4a005827ec0b33f0c61fec1634a5a3421decd Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:15 -0700 Subject: [PATCH] ppc32: Add soft reset to MPC834x This change allows mpc83xx_restart to issue a software reset. Signed-off-by: Randy Vinson Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/83xx/mpc834x_sys.h | 6 ++++++ arch/ppc/syslib/ppc83xx_setup.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index 49db0f4c847e..a2f6e49d7151 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -28,6 +28,12 @@ #define BCSR_PHYS_ADDR ((uint)0xf8000000) #define BCSR_SIZE ((uint)(32 * 1024)) +#define BCSR_MISC_REG2_OFF 0x07 +#define BCSR_MISC_REG2_PORESET 0x01 + +#define BCSR_MISC_REG3_OFF 0x08 +#define BCSR_MISC_REG3_CNFLOCK 0x80 + #ifdef CONFIG_PCI /* PCI interrupt controller */ #define PIRQA MPC83xx_IRQ_IRQ4 diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index c28f9d679484..843cf8873e60 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -117,7 +118,34 @@ mpc83xx_early_serial_map(void) void mpc83xx_restart(char *cmd) { + volatile unsigned char __iomem *reg; + unsigned char tmp; + + reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + local_irq_disable(); + + /* + * Unlock the BCSR bits so a PRST will update the contents. + * Otherwise the reset asserts but doesn't clear. + */ + tmp = in_8(reg + BCSR_MISC_REG3_OFF); + tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */ + out_8(reg + BCSR_MISC_REG3_OFF, tmp); + + /* + * Trigger a reset via a low->high transition of the + * PORESET bit. + */ + tmp = in_8(reg + BCSR_MISC_REG2_OFF); + tmp &= ~BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + + udelay(1); + + tmp |= BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + for(;;); } -- cgit v1.2.1 From 6cf2b3fc9934a56ceeb393ea5d0149e0bebc80fa Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 28 May 2005 15:52:15 -0700 Subject: [PATCH] ppc32: i8259 PIC should not be initialized if PCI is not configured Trying to initialize the i8259 PIC will not work if CONFIG_PCI is not enabled. The kernel hangs if the initialization is tried. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 3ac0321eed03..e7cfa498568c 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -200,12 +200,14 @@ mpc85xx_cds_init_IRQ(void) */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); +#ifdef CONFIG_PCI openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); for (i = 0; i < NUM_8259_INTERRUPTS; i++) irq_desc[i].handler = &i8259_pic; i8259_init(0); +#endif #ifdef CONFIG_CPM2 /* Setup CPM2 PIC */ -- cgit v1.2.1 From 05fda3b1d88ebac1fc866fc3ed5b7ef5a4672fa6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 31 May 2005 17:01:11 +1000 Subject: [PATCH] ppc64: actually call prom_send_capabilities When I sent in the patch adding the code for the kernel to tell the firmware about its capabilities on pSeries machines, I included the function to give the capabilities to firmware but somehow forgot the hunk that adds the call to the new function. This patch adds the call. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 6f79b7b9b445..bc53967a8643 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1880,6 +1880,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long prom_setprop(_prom->chosen, "linux,platform", &getprop_rval, sizeof(getprop_rval)); + /* + * On pSeries, inform the firmware about our capabilities + */ + if (RELOC(of_platform) & PLATFORM_PSERIES) + prom_send_capabilities(); + /* * On pSeries, copy the CPU hold code */ -- cgit v1.2.1 From fffcc150a21853651ea890a605832c5cccbb6279 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Tue, 31 May 2005 10:38:32 -0700 Subject: [IA64] Use "PER_CPU" form of EXPORT macro I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros. Signed-off-by: Tony Luck --- arch/ia64/kernel/perfmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 0e58ec7db128..6407bff6bfd7 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -609,7 +609,7 @@ DEFINE_PER_CPU(unsigned long, pfm_syst_info); DEFINE_PER_CPU(struct task_struct *, pmu_owner); DEFINE_PER_CPU(pfm_context_t *, pmu_ctx); DEFINE_PER_CPU(unsigned long, pmu_activation_number); -EXPORT_SYMBOL_GPL(per_cpu__pfm_syst_info); +EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info); /* forward declaration */ -- cgit v1.2.1 From 8d91640606c47551771a9b27664f249f4b176613 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 31 May 2005 14:39:26 -0700 Subject: [PATCH] x86_64: More fixes for compilation without CONFIG_ACPI Suggested by Alexander Nyberg Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/io_apic.c | 1 + arch/x86_64/kernel/mpparse.c | 1 + arch/x86_64/kernel/time.c | 2 ++ 3 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 80e9b498c443..afd87e64d0a8 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -37,6 +37,7 @@ #include #include #include +#include #define __apicdebuginit __init diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index f86d9db94bfc..61a63be6b294 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -30,6 +30,7 @@ #include #include #include +#include /* Have we found an MP table */ int smp_found_config; diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 735b6767c8ed..fb8c809b4cd9 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -27,7 +27,9 @@ #include #include #include +#ifdef CONFIG_ACPI #include /* for PM timer frequency */ +#endif #include #include #include -- cgit v1.2.1 From 9c2be6a0fa186e2cb0cf14f41f20b08a5809a026 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 31 May 2005 14:39:26 -0700 Subject: [PATCH] x86_64 CONFIG_ACPI=n build fix Make CONFIG_X86_PM_TIMER dependent on CONFIG_ACPI Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 0f430d9d3632..289f448ac89c 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -305,6 +305,7 @@ config HPET_TIMER config X86_PM_TIMER bool "PM timer" + depends on ACPI default y help Support the ACPI PM timer for time keeping. This is slow, -- cgit v1.2.1 From adaa765d76f58b47e10a4760f2c0bc86de5479b9 Mon Sep 17 00:00:00 2001 From: Alexander Nyberg Date: Tue, 31 May 2005 14:39:27 -0700 Subject: [PATCH] acpi build fix: x86 setup.c This is a neverending story linux/acpi.h contains empty declarations for acpi_boot_init() & acpi_boot_table_init() but they are nested inside #ifdef CONFIG_ACPI. So we'll have to #ifdef in arch/i386/kernel/setup.c: setup_arch() Signed-off-by: Alexander Nyberg Cc: "Brown, Len" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 945ec73163c8..2bfbddebdbf8 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1502,11 +1502,13 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); +#ifdef CONFIG_ACPI_BOOT /* * Parse the ACPI tables for possible boot-time SMP configuration. */ acpi_boot_table_init(); acpi_boot_init(); +#endif #ifdef CONFIG_X86_LOCAL_APIC if (smp_found_config) -- cgit v1.2.1 From 2e214953295dd33fc62d43ac7ec91997afad75bb Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Tue, 31 May 2005 14:39:28 -0700 Subject: [PATCH] h8300 sleep problem h8300 appears to sleep (halt) when need_resched IS set. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/h8300/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 134aec1c6d19..b5f83e9f04db 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -54,7 +54,7 @@ asmlinkage void ret_from_fork(void); void default_idle(void) { while(1) { - if (need_resched()) { + if (!need_resched()) { local_irq_enable(); __asm__("sleep"); local_irq_disable(); -- cgit v1.2.1 From f50734569c25c4e902bd3d0fb2e5bd93a200cc75 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 May 2005 14:39:29 -0700 Subject: [PATCH] ppc64: allow timer based profiling on iseries We used to have an iseries specific profiler that used /proc/profile. Now thats gone we can use the generic timer based stuff. Signed-off-by: Anton Blanchard Acked-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/time.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 3d54745108c7..33364a7d2cd2 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs) irq_enter(); -#ifndef CONFIG_PPC_ISERIES profile_tick(CPU_PROFILING, regs); -#endif lpaca->lppaca.int_dword.fields.decr_int = 0; -- cgit v1.2.1 From 7c963ad1d113790a8c723a178988b675868f3abe Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 May 2005 16:57:59 -0700 Subject: [SPARC64]: Fix streaming buffer flushing on PCI and SBUS. Firstly, if the direction is TODEVICE, then dirty data in the streaming cache is impossible so we can elide the flush-flag synchronization in that case. Next, the context allocator is broken. It is highly likely that contexts get used multiple times for different dma mappings, which confuses the strbuf flushing code and makes it run inefficiently. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_iommu.c | 90 +++++++++++++++++++++++++++++++--------- arch/sparc64/kernel/pci_psycho.c | 2 +- arch/sparc64/kernel/pci_sabre.c | 2 +- arch/sparc64/kernel/pci_schizo.c | 2 +- arch/sparc64/kernel/sbus.c | 20 ++++++--- 5 files changed, 87 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 33ca56c90da2..1807876f8c36 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -196,6 +196,34 @@ static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long return NULL; } +static int iommu_alloc_ctx(struct pci_iommu *iommu) +{ + int lowest = iommu->ctx_lowest_free; + int sz = IOMMU_NUM_CTXS - lowest; + int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest); + + if (unlikely(n == sz)) { + n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1); + if (unlikely(n == lowest)) { + printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); + n = 0; + } + } + if (n) + __set_bit(n, iommu->ctx_bitmap); + + return n; +} + +static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx) +{ + if (likely(ctx)) { + __clear_bit(ctx, iommu->ctx_bitmap); + if (ctx < iommu->ctx_lowest_free) + iommu->ctx_lowest_free = ctx; + } +} + /* Allocate and map kernel buffer of size SIZE using consistent mode * DMA for PCI device PDEV. Return non-NULL cpu-side address if * successful and set *DMA_ADDRP to the PCI side dma address. @@ -236,7 +264,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad npages = size >> IO_PAGE_SHIFT; ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); first_page = __pa(first_page); while (npages--) { iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) | @@ -317,6 +345,8 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_ } } + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); order = get_order(size); @@ -360,7 +390,7 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct base_paddr = __pa(oaddr & IO_PAGE_MASK); ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); if (strbuf->strbuf_enabled) iopte_protection = IOPTE_STREAMING(ctx); else @@ -380,39 +410,55 @@ bad: return PCI_DMA_ERROR_CODE; } -static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages) +static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction) { int limit; - PCI_STC_FLUSHFLAG_INIT(strbuf); if (strbuf->strbuf_ctxflush && iommu->iommu_ctxflush) { unsigned long matchreg, flushreg; + u64 val; flushreg = strbuf->strbuf_ctxflush; matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - limit = 100000; + if (pci_iommu_read(matchreg) == 0) + goto do_flush_sync; + pci_iommu_write(flushreg, ctx); - for(;;) { - if (((long)pci_iommu_read(matchreg)) >= 0L) - break; - limit--; - if (!limit) - break; - udelay(1); + if ((val = pci_iommu_read(matchreg)) == 0) + goto do_flush_sync; + + val &= 0xffff; + while (val) { + if (val & 0x1) + pci_iommu_write(flushreg, ctx); + val >>= 1; } - if (!limit) + val = pci_iommu_read(matchreg); + if (unlikely(val)) { printk(KERN_WARNING "pci_strbuf_flush: ctx flush " - "timeout vaddr[%08x] ctx[%lx]\n", - vaddr, ctx); + "timeout matchreg[%lx] ctx[%lx]\n", + val, ctx); + goto do_page_flush; + } } else { unsigned long i; + do_page_flush: for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) pci_iommu_write(strbuf->strbuf_pflush, vaddr); } +do_flush_sync: + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == PCI_DMA_TODEVICE) + return; + + PCI_STC_FLUSHFLAG_INIT(strbuf); pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); (void) pci_iommu_read(iommu->write_complete_reg); @@ -466,7 +512,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int /* Step 1: Kick data out of streaming buffers if necessary. */ if (strbuf->strbuf_enabled) - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -474,6 +520,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -613,7 +661,7 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int /* Step 4: Choose a context if necessary. */ ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); /* Step 5: Create the mappings. */ if (strbuf->strbuf_enabled) @@ -678,7 +726,7 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, /* Step 1: Kick data out of streaming buffers if necessary. */ if (strbuf->strbuf_enabled) - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -686,6 +734,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -724,7 +774,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size } /* Step 2: Kick data out of streaming buffers. */ - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -768,7 +818,7 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i i--; npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT; - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 3567fa879e1f..534320ef0db2 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1212,7 +1212,7 @@ static void __init psycho_iommu_init(struct pci_controller_info *p) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 5525d1ec4af8..53d333b4a4e8 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -1265,7 +1265,7 @@ static void __init sabre_iommu_init(struct pci_controller_info *p, /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index e93fcadc3722..5753175b94e6 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1753,7 +1753,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses, SCHIZO has iommu ctx flushing. */ iommu->iommu_control = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index 76ea6455433f..89f5e019f24c 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -117,17 +117,25 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages #define STRBUF_TAG_VALID 0x02UL -static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages) +static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction) { unsigned long n; int limit; - iommu->strbuf_flushflag = 0UL; n = npages; while (n--) upa_writeq(base + (n << IO_PAGE_SHIFT), iommu->strbuf_regs + STRBUF_PFLUSH); + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == SBUS_DMA_TODEVICE) + return; + + iommu->strbuf_flushflag = 0UL; + /* Whoopee cushion! */ upa_writeq(__pa(&iommu->strbuf_flushflag), iommu->strbuf_regs + STRBUF_FSYNC); @@ -421,7 +429,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT); - sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -584,7 +592,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int iommu = sdev->bus->iommu; spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT); - sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -596,7 +604,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK)); spin_lock_irqsave(&iommu->lock, flags); - sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -620,7 +628,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base; spin_lock_irqsave(&iommu->lock, flags); - sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } -- cgit v1.2.1 From 7eb53d88230e23f83b2e20a78955e1412fa7bb26 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:42 -0700 Subject: [CPUFREQ] powernow-k7: don't print khz element of FSB. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 913f652623d9..80f01b00bada 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -592,7 +592,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) printk(KERN_WARNING PFX "can not determine bus frequency\n"); return -EINVAL; } - dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000); + dprintk("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); -- cgit v1.2.1 From 8282864a96ef0a7b88ee9e4b357e08504131394d Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:43 -0700 Subject: [CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) support The Pentium 4 - Ms (HT) with CPUID 0xF34 and 0xF41 seem to support centrino-like enhanced speedstep; however, no "table" support is possible. Therefore, put NULL entries into speedstep-centrino.c Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 07d5612dc00f..7dcbf70fc16f 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -54,6 +54,8 @@ enum { CPU_DOTHAN_A1, CPU_DOTHAN_A2, CPU_DOTHAN_B0, + CPU_MP4HT_D0, + CPU_MP4HT_E0, }; static const struct cpu_id cpu_ids[] = { @@ -61,6 +63,8 @@ static const struct cpu_id cpu_ids[] = { [CPU_DOTHAN_A1] = { 6, 13, 1 }, [CPU_DOTHAN_A2] = { 6, 13, 2 }, [CPU_DOTHAN_B0] = { 6, 13, 6 }, + [CPU_MP4HT_D0] = {15, 3, 4 }, + [CPU_MP4HT_E0] = {15, 4, 1 }, }; #define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) @@ -226,6 +230,8 @@ static struct cpu_model models[] = { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, { NULL, } }; -- cgit v1.2.1 From 6f4095af6df7aa365ecf18473c8b05c5f6c38a78 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:44 -0700 Subject: [CPUFREQ] speedstep-smi: it works on at least one P4M The speedstep-smi driver actually works on >=1 notebook with a Pentium 4-M CPU where all other cpufreq drivers fail. Therefore, allow speedstep-smi on P4Ms again, but warn users of likely failure Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/speedstep-smi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 79440b3f087e..b25fb6b635ae 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -357,6 +357,9 @@ static int __init speedstep_init(void) case SPEEDSTEP_PROCESSOR_PIII_C: case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: break; + case SPEEDSTEP_PROCESSOR_P4M: + printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n"); + break; default: speedstep_processor = 0; } -- cgit v1.2.1 From bf6fc9fd2d848d06b8f6c4caccef1dba9ef8c4c6 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:45 -0700 Subject: [CPUFREQ] AMD Elan SC520 cpufreq driver. From: Sean Young Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/Kconfig | 14 ++- arch/i386/kernel/cpu/cpufreq/Makefile | 1 + arch/i386/kernel/cpu/cpufreq/sc520_freq.c | 186 ++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+), 1 deletion(-) create mode 100644 arch/i386/kernel/cpu/cpufreq/sc520_freq.c (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index f25ffd74235c..0f1eb507233b 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -23,7 +23,7 @@ config X86_ACPI_CPUFREQ If in doubt, say N. config ELAN_CPUFREQ - tristate "AMD Elan" + tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE depends on X86_ELAN ---help--- @@ -38,6 +38,18 @@ config ELAN_CPUFREQ If in doubt, say N. +config SC520_CPUFREQ + tristate "AMD Elan SC520" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at . + + If in doubt, say N. + + config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" select CPU_FREQ_TABLE diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index a922e97aeedd..2e894f1c8910 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o +obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c new file mode 100644 index 000000000000..ef457d50f4ac --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c @@ -0,0 +1,186 @@ +/* + * sc520_freq.c: cpufreq driver for the AMD Elan sc520 + * + * Copyright (C) 2005 Sean Young + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on elanfreq.c + * + * 2005-03-30: - initial revision + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include + +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_CPUCTL 0x2 /* CPU Control Register */ + +static __u8 __iomem *cpuctl; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) + +static struct cpufreq_frequency_table sc520_freq_table[] = { + {0x01, 100000}, + {0x02, 133000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg = *cpuctl; + + switch (clockspeed_reg & 0x03) { + default: + printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + case 0x01: + return 100000; + case 0x02: + return 133000; + } +} + +static void sc520_freq_set_cpu_state (unsigned int state) +{ + + struct cpufreq_freqs freqs; + u8 clockspeed_reg; + + freqs.old = sc520_freq_get_cpu_frequency(0); + freqs.new = sc520_freq_table[state].frequency; + freqs.cpu = 0; /* AMD Elan is UP */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dprintk("attempting to set frequency to %i kHz\n", + sc520_freq_table[state].frequency); + + local_irq_disable(); + + clockspeed_reg = *cpuctl & ~0x03; + *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int sc520_freq_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); +} + +static int sc520_freq_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + return -EINVAL; + + sc520_freq_set_cpu_state(newstate); + + return 0; +} + + +/* + * Module init and exit code + */ + +static int sc520_freq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = cpu_data; + int result; + + /* capability check */ + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) + return -ENODEV; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->cur = sc520_freq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); + + return 0; +} + + +static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + + +static struct freq_attr* sc520_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver sc520_freq_driver = { + .get = sc520_freq_get_cpu_frequency, + .verify = sc520_freq_verify, + .target = sc520_freq_target, + .init = sc520_freq_cpu_init, + .exit = sc520_freq_cpu_exit, + .name = "sc520_freq", + .owner = THIS_MODULE, + .attr = sc520_freq_attr, +}; + + +static int __init sc520_freq_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* Test if we have the right hardware */ + if(c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { + dprintk("no Elan SC520 processor found!\n"); + return -ENODEV; + } + cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); + if(!cpuctl) { + printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + return -ENOMEM; + } + + return cpufreq_register_driver(&sc520_freq_driver); +} + + +static void __exit sc520_freq_exit(void) +{ + cpufreq_unregister_driver(&sc520_freq_driver); + iounmap(cpuctl); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young "); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); + +module_init(sc520_freq_init); +module_exit(sc520_freq_exit); + -- cgit v1.2.1 From 91350ed49bf3613e243c2e216228cd4ae8f32516 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:45 -0700 Subject: [CPUFREQ] Recalibrate cpu_khz [1/2] We have to recalibrate cpu_khz in order to use the current FID instead the max FID since some BIOS do not put the processor at maximum frequency at POST. Also, some BIOS will change the processor frequency at our back after cpu_khz was calibrate. Finally, this will fix a long standing bug when we do something like this: # rmmod powernow-k7 # modprobe powernow-k7 Signed-off-by: Bruno Ducrot Signed-off-by: Andrew Morton Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k7.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 80f01b00bada..5c530064eb74 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -586,8 +587,12 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); - /* A K7 with powernow technology is set to max frequency by BIOS */ - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID]; + /* recalibrate cpu_khz */ + result = recalibrate_cpu_khz(); + if (result) + return result; + + fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; if (!fsb) { printk(KERN_WARNING PFX "can not determine bus frequency\n"); return -EINVAL; -- cgit v1.2.1 From c5d28fb297efaa97c4b90e36f9dff3066e7f2778 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:46 -0700 Subject: [CPUFREQ] Recalibrate cpu_khz [2/2] Some cpufreq drivers (at that time, only powernow-k7) need to recalibrate the cpu_khz at runtime. Signed-off-by: Bruno Ducrot Signed-off-by: Andrew Morton Signed-off-by: Dave Jones --- arch/i386/kernel/timers/common.c | 6 ++++-- arch/i386/kernel/timers/timer_tsc.c | 20 ++++++++++++++++++++ 2 files changed, 24 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c index f7f90005e22e..8e201219f525 100644 --- a/arch/i386/kernel/timers/common.c +++ b/arch/i386/kernel/timers/common.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include @@ -24,7 +25,7 @@ #define CALIBRATE_TIME (5 * 1000020/HZ) -unsigned long __init calibrate_tsc(void) +unsigned long calibrate_tsc(void) { mach_prepare_counter(); @@ -139,7 +140,7 @@ bad_calibration: #endif /* calculate cpu_khz */ -void __init init_cpu_khz(void) +void init_cpu_khz(void) { if (cpu_has_tsc) { unsigned long tsc_quotient = calibrate_tsc(); @@ -158,3 +159,4 @@ void __init init_cpu_khz(void) } } } + diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 7926d967be00..180444d87824 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -320,6 +320,26 @@ core_initcall(cpufreq_tsc); static inline void cpufreq_delayed_get(void) { return; } #endif +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + init_cpu_khz(); + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, + cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} +EXPORT_SYMBOL(recalibrate_cpu_khz); + static void mark_offset_tsc(void) { unsigned long lost,delay; -- cgit v1.2.1 From 065b807ca1f5bdbeb081e3cf75ac8de9be8ac212 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:46 -0700 Subject: [CPUFREQ] dual-core powernow-k8 With the release of the dual-core AMD Opterons last week, it's high time that cpufreq supported them. The attached patch applies cleanly to 2.6.12-rc3 and updates powernow-k8 to support the latest Athlon 64 and Opteron processors. Update the driver to version 1.40.0 and provide support for dual-core processors. Signed-off-by: Mark Langsdorf Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 113 +++++++++++++++++++---------- arch/i386/kernel/cpu/cpufreq/powernow-k8.h | 15 ++++ 2 files changed, 91 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index a65ff7e32e5d..10cc096c0ade 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -4,7 +4,7 @@ * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html * - * Support : paul.devriendt@amd.com + * Support : mark.langsdorf@amd.com * * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones on behalf of SuSE Labs @@ -15,12 +15,13 @@ * * Valuable input gratefully received from Dave Jones, Pavel Machek, * Dominik Brodowski, and others. + * Originally developed by Paul Devriendt. * Processor information obtained from Chapter 9 (Power and Thermal Management) * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD * Opteron Processors" available for download from www.amd.com * * Tables for specific CPUs can be infrerred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf */ #include @@ -30,6 +31,7 @@ #include #include #include +#include #include #include @@ -42,7 +44,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.00.09e" +#define VERSION "version 1.40.2" #include "powernow-k8.h" /* serialize freq changes */ @@ -50,6 +52,10 @@ static DECLARE_MUTEX(fidvid_sem); static struct powernow_k8_data *powernow_data[NR_CPUS]; +#ifndef CONFIG_SMP +static cpumask_t cpu_core_map[1]; +#endif + /* Return a frequency in MHz, given an input fid */ static u32 find_freq_from_fid(u32 fid) { @@ -274,11 +280,18 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid { u32 rvosteps = data->rvo; u32 savefid = data->currfid; + u32 maxvid, lo; dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); + rdmsr(MSR_FIDVID_STATUS, lo, maxvid); + maxvid = 0x1f & (maxvid >> 16); + dprintk("ph1 maxvid=0x%x\n", maxvid); + if (reqvid < maxvid) /* lower numbers are higher voltages */ + reqvid = maxvid; + while (data->currvid > reqvid) { dprintk("ph1: curr 0x%x, req vid 0x%x\n", data->currvid, reqvid); @@ -286,8 +299,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid return 1; } - while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { - if (data->currvid == 0) { + while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { + if (data->currvid == maxvid) { rvosteps = 0; } else { dprintk("ph1: changing vid for rvo, req 0x%x\n", @@ -671,7 +684,7 @@ static int find_psb_table(struct powernow_k8_data *data) * BIOS and Kernel Developer's Guide, which is available on * www.amd.com */ - printk(KERN_ERR PFX "BIOS error - no PSB\n"); + printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n"); return -ENODEV; } @@ -695,7 +708,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) struct cpufreq_frequency_table *powernow_table; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed\n"); + dprintk("register performance failed: bad ACPI data\n"); return -EIO; } @@ -746,22 +759,23 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) continue; } - if (fid < HI_FID_TABLE_BOTTOM) { - if (cntlofreq) { - /* if both entries are the same, ignore this - * one... - */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); - goto err_out_mem; - } - - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } else - cntlofreq = i; + /* verify only 1 entry from the lo frequency table */ + if (fid < HI_FID_TABLE_BOTTOM) { + if (cntlofreq) { + /* if both entries are the same, ignore this + * one... + */ + if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || + (powernow_table[i].index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX "Too many lo freq table entries\n"); + goto err_out_mem; + } + + dprintk("double low frequency table entry, ignoring it.\n"); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } else + cntlofreq = i; } if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { @@ -816,7 +830,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde { u32 fid; u32 vid; - int res; + int res, i; struct cpufreq_freqs freqs; dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); @@ -841,7 +855,8 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde } if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk("ignoring illegal change in lo freq table-%x to 0x%x\n", + printk(KERN_ERR PFX + "ignoring illegal change in lo freq table-%x to 0x%x\n", data->currfid, fid); return 1; } @@ -850,18 +865,20 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde smp_processor_id(), fid, vid); freqs.cpu = data->cpu; - freqs.old = find_khz_freq_from_fid(data->currfid); freqs.new = find_khz_freq_from_fid(fid); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } - down(&fidvid_sem); res = transition_fid_vid(data, fid, vid); - up(&fidvid_sem); freqs.new = find_khz_freq_from_fid(data->currfid); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } return res; } @@ -874,6 +891,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi u32 checkvid = data->currvid; unsigned int newstate; int ret = -EIO; + int i; /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; @@ -902,22 +920,41 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi data->currfid, data->currvid); if ((checkvid != data->currvid) || (checkfid != data->currfid)) { - printk(KERN_ERR PFX - "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); + printk(KERN_INFO PFX + "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, checkvid, data->currvid); } if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) goto err_out; + down(&fidvid_sem); + + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + /* make sure the sibling is initialized */ + if (!powernow_data[i]) { + ret = 0; + up(&fidvid_sem); + goto err_out; + } + } + powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { printk(KERN_ERR PFX "transition frequency failed\n"); ret = 1; + up(&fidvid_sem); goto err_out; } + /* Update all the fid/vids of our siblings */ + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + powernow_data[i]->currvid = data->currvid; + powernow_data[i]->currfid = data->currfid; + } + up(&fidvid_sem); + pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -962,7 +999,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) */ if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) { - printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n"); + printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); kfree(data); return -ENODEV; } @@ -1003,6 +1040,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) schedule(); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; + pol->cpus = cpu_core_map[pol->cpu]; /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ @@ -1069,7 +1107,7 @@ static unsigned int powernowk8_get (unsigned int cpu) return 0; } preempt_disable(); - + if (query_current_values_with_pending_wait(data)) goto out; @@ -1127,9 +1165,10 @@ static void __exit powernowk8_exit(void) cpufreq_unregister_driver(&cpufreq_amd64_driver); } -MODULE_AUTHOR("Paul Devriendt "); +MODULE_AUTHOR("Paul Devriendt and Mark Langsdorf Date: Tue, 31 May 2005 19:03:51 -0700 Subject: [CPUFREQ] longhaul - disable PCI mastering around transition. The spec states that we have to do this, which is *horrid*. Based on code from: Ken Staton Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 49 ++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index ab0f9f5aac11..8ea545e35b3a 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -120,6 +121,11 @@ static void do_powersaver(union msr_longhaul *longhaul, unsigned int clock_ratio_index) { int version; + unsigned long flags; + struct pci_dev *dev; + int i; + u16 pci_cmd; + u16 cmd_state[64]; switch (cpu_model) { case CPU_EZRA_T: @@ -137,17 +143,52 @@ static void do_powersaver(union msr_longhaul *longhaul, longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; longhaul->bits.EnableSoftBusRatio = 1; longhaul->bits.RevisionKey = 0; - local_irq_disable(); - wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); + + preempt_disable(); + local_irq_save(flags); + + /* + * get current pci bus master state for all devices + * and clear bus master bit + */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + cmd_state[i++] = pci_cmd; + pci_cmd &= ~PCI_COMMAND_MASTER; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + local_irq_enable(); + + __hlt(); + wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); __hlt(); + local_irq_disable(); + + /* restore pci bus master state for all devices */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_cmd = cmd_state[i++]; + pci_write_config_byte(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + local_irq_restore(flags); + preempt_enable(); + + /* disable bus ratio bit */ rdmsrl(MSR_VIA_LONGHAUL, longhaul->val); longhaul->bits.EnableSoftBusRatio = 0; longhaul->bits.RevisionKey = version; - local_irq_disable(); wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); - local_irq_enable(); } /** -- cgit v1.2.1 From 1174631418fbb2c0c6946081b0b7d391f5d92861 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:51 -0700 Subject: [CPUFREQ] Longhaul: Magic timer frobbing. As mandated by the spec, disable timer around transitions. From code by : Ken Staton --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 8ea545e35b3a..48899f0956f7 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -120,9 +120,10 @@ static int longhaul_get_cpu_mult(void) static void do_powersaver(union msr_longhaul *longhaul, unsigned int clock_ratio_index) { - int version; - unsigned long flags; struct pci_dev *dev; + unsigned long flags; + unsigned int tmp_mask; + int version; int i; u16 pci_cmd; u16 cmd_state[64]; @@ -163,6 +164,10 @@ static void do_powersaver(union msr_longhaul *longhaul, } } while (dev != NULL); + tmp_mask=inb(0x21); /* works on C3. save mask. */ + outb(0xFE,0x21); /* TMR0 only */ + outb(0xFF,0x80); /* delay */ + local_irq_enable(); __hlt(); @@ -171,6 +176,8 @@ static void do_powersaver(union msr_longhaul *longhaul, local_irq_disable(); + outb(tmp_mask,0x21); /* restore mask */ + /* restore pci bus master state for all devices */ dev = NULL; i = 0; -- cgit v1.2.1 From 6778bae0f2f1d4af1b8bb876c992ea094ee958b4 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:51 -0700 Subject: [CPUFREQ] longhaul - adjust transition latency. From patch by: Ken Staton Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 48899f0956f7..04e3563da4fe 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -626,7 +626,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = 200000; /* nsec */ policy->cur = calc_speed(longhaul_get_cpu_mult()); ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); -- cgit v1.2.1 From f94ea640a28230f82a4395c34e1290748a9f6586 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 31 May 2005 19:03:52 -0700 Subject: [CPUFREQ] Typos. cpfureq developers cant spel. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/speedstep-lib.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c index 8ba430a9c3a2..d368b3f5fce8 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c @@ -336,7 +336,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, if (!prev_speed) return -EIO; - dprintk("previous seped is %u\n", prev_speed); + dprintk("previous speed is %u\n", prev_speed); local_irq_save(flags); @@ -348,7 +348,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("low seped is %u\n", *low_speed); + dprintk("low speed is %u\n", *low_speed); /* switch to high state */ set_state(SPEEDSTEP_HIGH); @@ -358,7 +358,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("high seped is %u\n", *high_speed); + dprintk("high speed is %u\n", *high_speed); if (*low_speed == *high_speed) { ret = -ENODEV; -- cgit v1.2.1 From 88314ee73fd75eb32abdcb3119cd303c116d4500 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 May 2005 19:13:52 -0700 Subject: [SPARC64]: Refine PCI strbuf ctx-based flush. The initial peek read PIO of the match register is just a waste. Just do the flush writes first, as that is more efficient. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_iommu.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 1807876f8c36..2803bc7c2c79 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -422,14 +422,12 @@ static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, flushreg = strbuf->strbuf_ctxflush; matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - if (pci_iommu_read(matchreg) == 0) - goto do_flush_sync; - pci_iommu_write(flushreg, ctx); - if ((val = pci_iommu_read(matchreg)) == 0) + val = pci_iommu_read(matchreg); + val &= 0xffff; + if (!val) goto do_flush_sync; - val &= 0xffff; while (val) { if (val & 0x1) pci_iommu_write(flushreg, ctx); -- cgit v1.2.1 From 44e4665cc9d856d15f04a012c78e4ab48f71290b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 1 Jun 2005 14:54:25 +1000 Subject: [PATCH] ppc64: Fix a device-tree bug on Apple's Apple's Open Firmware has a funny bug when creating the /cpus nodes where it leaves a dangling '\0' character in the CPU name which ends up appearing in the full path of the node. This is bogus and confuses /proc/device-tree badly. This patch strips those bogus zero's from the node full path when reading the device-tree from Open Firmware. The "name" property is not modified and still contains the spurrious 0 (it basically contains 0 tailing 0 instead of one) but that shouldn't be a problem. An equivalent patch for ppc32 will follow shortly Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index bc53967a8643..3de950de3671 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1566,7 +1566,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, { int l, align; phandle child; - char *namep, *prev_name, *sstart; + char *namep, *prev_name, *sstart, *p, *ep; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); @@ -1588,6 +1588,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = namep, ep = namep + l; p < ep; p++) + if (*p == '\0') { + memmove(p, p+1, ep - p); + ep--; l--; + } *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); } -- cgit v1.2.1 From f93ea2349832c040bdf66dc7495aa87bfe3394b8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 1 Jun 2005 17:02:22 +1000 Subject: [PATCH] ppc32: Apple device-tree bug fix This is the ppc32 patch equivalent to the just posted ppc64 one working around a bug in Apple device-trees regarding the "cpus" nodes. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc/syslib/prom_init.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 2cee87137f2e..7f15136830f4 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad, l = call_prom("package-to-path", 3, 1, node, mem_start, mem_end - mem_start); if (l >= 0) { + char *p, *ep; + np->full_name = PTRUNRELOC((char *) mem_start); *(char *)(mem_start + l) = 0; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = (char *)mem_start, ep = p + l; p < ep; p++) + if ((*p) == '\0') { + memmove(p, p+1, ep - p); + ep--; + } mem_start = ALIGNUL(mem_start + l + 1); } -- cgit v1.2.1 From 5f64f73957f6cae3222f97f2599199ee562f7f3f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 1 Jun 2005 17:07:27 +1000 Subject: [PATCH] ppc32/ppc64: cleanup /proc/device-tree This cleans up the /proc/device-tree representation of the Open Firmware device-tree on ppc and ppc64. It does the following things: - Workaround an issue in some Apple device-trees where a property may exist with the same name as a child node of the parent. We now simply "drop" the property instead of creating duplicate entries in /proc with random result... - Do not try to chop off the "@0" at the end of a node name whose unit address is 0. This is not useful, inconsistent, and the code was buggy and didn't always work anyway. - Do not create symlinks for the short name and unit address parts of a node. These were never really used, bloated the memory footprint of the device-tree with useless struct proc_dir_entry and their matching dentry and inode cache bloat. This results in smaller code, smaller memory footprint, and a more accurate view of the tree presented to userland. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/pSeries_reconfig.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index cb5443f2e49b..dc2a69d412a2 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np) remove_proc_entry(pp->name, np->pde); pp = pp->next; } - - /* Assuming that symlinks have the same parent directory as - * np->pde. - */ - if (np->name_link) - remove_proc_entry(np->name_link->name, parent->pde); - if (np->addr_link) - remove_proc_entry(np->addr_link->name, parent->pde); if (np->pde) remove_proc_entry(np->pde->name, parent->pde); } -- cgit v1.2.1 From b655913bf364603d17ad770dc4fb80e60555a255 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Tue, 31 May 2005 22:34:00 -0700 Subject: [IA64] Cleanup compile warnings for ski config The attached patch cleans up a compilation warning when ACPI is turned off (i.e., when compiling for the Ski simulator). Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 2c75741dcc66..736e328b5e61 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1103,8 +1103,6 @@ ia64_mca_cpe_int_caller(int cpe_irq, void *arg, struct pt_regs *ptregs) return IRQ_HANDLED; } -#endif /* CONFIG_ACPI */ - /* * ia64_mca_cpe_poll * @@ -1122,6 +1120,8 @@ ia64_mca_cpe_poll (unsigned long dummy) platform_send_ipi(first_cpu(cpu_online_map), IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0); } +#endif /* CONFIG_ACPI */ + /* * C portion of the OS INIT handler * -- cgit v1.2.1 From d8caebd285a084ee1e4d484ce597865228614067 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Tue, 31 May 2005 22:37:00 -0700 Subject: [IA64] fix compilation warning in sys32_epoll_wait() This gets rid of an unused variable `error' in sys_ia32.c:sys32_epoll_wait() Getting rid of this one makes parsing the output of the kernecomp autobuild easier --- searching for `Error' to find a problem kept hitting this one, even though it's only a warning. Signed-off-by: Tony Luck --- arch/ia64/ia32/sys_ia32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 247a21c64aea..c1e20d65dd6c 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2427,7 +2427,7 @@ sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents, { struct epoll_event *events64 = NULL; mm_segment_t old_fs = get_fs(); - int error, numevents, size; + int numevents, size; int evt_idx; int do_free_pages = 0; -- cgit v1.2.1