From 96de0e252cedffad61b3cb5e05662c591898e69a Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 19 Oct 2007 23:21:04 +0200 Subject: Convert files to UTF-8 and some cleanups MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt Signed-off-by: Adrian Bunk --- arch/x86/kernel/cpu/cpufreq/powernow-k6.c | 2 +- arch/x86/kernel/cpu/cyrix.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/x86/kernel/cpu') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index 6d0285339317..a07f6d84033a 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -1,6 +1,6 @@ /* * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. * * Licensed under the terms of the GNU GPL License version 2. * diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 122d2d75aa9f..65fa636f410e 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -115,9 +115,9 @@ static void __cpuinit set_cx86_reorder(void) printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n"); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - /* Load/Store Serialize to mem access disable (=reorder it)  */ + /* Load/Store Serialize to mem access disable (=reorder it) */ setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80); /* set load/store serialize from 1GB to 4GB */ ccr3 |= 0xe0; @@ -146,7 +146,7 @@ static void __cpuinit set_cx86_inc(void) printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n"); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* PCR1 -- Performance Control */ /* Incrementor on, whatever that is */ setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02); -- cgit v1.2.1 From db955170d40601d9925f01712782fbe3ce362b7e Mon Sep 17 00:00:00 2001 From: Marcin Garski Date: Fri, 19 Oct 2007 23:22:11 +0200 Subject: more UTF-8 conversions Signed-off-by: Adrian Bunk --- arch/x86/kernel/cpu/cyrix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86/kernel/cpu') diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 65fa636f410e..4aa2ff8d3c43 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -93,7 +93,7 @@ static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c) local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ ccr5 = getCx86(CX86_CCR5); if (ccr5 & 2) setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */ -- cgit v1.2.1 From 27b46d7661dc720224813eb4f452e424f1bf3a9a Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 20 Oct 2007 01:13:56 +0200 Subject: spelling fixes: arch/i386/ Spelling fixes in arch/i386/. Signed-off-by: Simon Arlott Signed-off-by: Adrian Bunk --- arch/x86/kernel/cpu/amd.c | 2 +- arch/x86/kernel/cpu/centaur.c | 4 ++-- arch/x86/kernel/cpu/common.c | 2 +- arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c | 2 +- arch/x86/kernel/cpu/cpufreq/gx-suspmod.c | 8 ++++---- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 2 +- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 4 ++-- arch/x86/kernel/cpu/cyrix.c | 2 +- arch/x86/kernel/cpu/mtrr/cyrix.c | 4 ++-- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- arch/x86/kernel/cpu/mtrr/main.c | 2 +- 11 files changed, 17 insertions(+), 17 deletions(-) (limited to 'arch/x86/kernel/cpu') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 5f8af875f457..1ff88c7f45cf 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -266,7 +266,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_HT /* * On a AMD multi core setup the lower bits of the APIC id - * distingush the cores. + * distinguish the cores. */ if (c->x86_max_cores > 1) { int cpu = smp_processor_id(); diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index 473eac883c7b..9681fa15ddf0 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -53,7 +53,7 @@ static u32 __cpuinit ramtop(void) /* 16388 */ continue; /* * Don't MCR over reserved space. Ignore the ISA hole - * we frob around that catastrophy already + * we frob around that catastrophe already */ if (e820.map[i].type == E820_RESERVED) @@ -287,7 +287,7 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) c->x86_capability[5] = cpuid_edx(0xC0000001); } - /* Cyrix III family needs CX8 & PGE explicity enabled. */ + /* Cyrix III family needs CX8 & PGE explicitly enabled. */ if (c->x86_model >=6 && c->x86_model <= 9) { rdmsr (MSR_VIA_FCR, lo, hi); lo |= (1<<1 | 1<<7); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index d506201d397c..e2fcf2051bdb 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -207,7 +207,7 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) static int __init x86_fxsr_setup(char * s) { - /* Tell all the other CPU's to not use it... */ + /* Tell all the other CPUs to not use it... */ disable_x86_fxsr = 1; /* diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index 32f0bda3fc95..f03e9153618e 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -260,7 +260,7 @@ static int nforce2_target(struct cpufreq_policy *policy, freqs.old = nforce2_get(policy->cpu); freqs.new = target_fsb * fid * 100; - freqs.cpu = 0; /* Only one CPU on nForce2 plattforms */ + freqs.cpu = 0; /* Only one CPU on nForce2 platforms */ if (freqs.old == freqs.new) return 0; diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c index ed2bda127c44..2ed7db2fd257 100644 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c @@ -12,12 +12,12 @@ * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. * - * Theoritical note: + * Theoretical note: * * (see Geode(tm) CS5530 manual (rev.4.1) page.56) * * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 - * are based on Suspend Moduration. + * are based on Suspend Modulation. * * Suspend Modulation works by asserting and de-asserting the SUSP# pin * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# @@ -101,11 +101,11 @@ /* SUSCFG bits */ #define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ +/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */ #define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ #define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the belows support only with cs5530A */ +/* the below is supported only with cs5530A */ #define PWRSVE_ISA (1<<3) /* stop ISA clock */ #define PWRSVE (1<<4) /* active idle */ diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index c06ac680c9ca..9c36a53676b7 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -168,7 +168,7 @@ static void count_off_irt(struct powernow_k8_data *data) return; } -/* the voltage stabalization time */ +/* the voltage stabilization time */ static void count_off_vst(struct powernow_k8_data *data) { udelay(data->vstable * VST_UNITS_20US); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index b06c812208ca..7c4f6e0faed4 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -148,10 +148,10 @@ struct powernow_k8_data { #define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ #define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ -#define VST_UNITS_20US 20 /* Voltage Stabalization Time is in units of 20us */ +#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */ /* - * Most values of interest are enocoded in a single field of the _PSS + * Most values of interest are encoded in a single field of the _PSS * entries: the "control" value. */ diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 4aa2ff8d3c43..88d66fb8411d 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -256,7 +256,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) u32 vendor, device; /* It isn't really a PCI quirk directly, but the cure is the same. The MediaGX has deep magic SMM stuff that handles the - SB emulation. It thows away the fifo on disable_dma() which + SB emulation. It throws away the fifo on disable_dma() which is wrong and ruins the audio. Bug2: VSA1 has a wrap bug so that using maximum sized DMA diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c index 2287d4863a8a..9964be3de2b7 100644 --- a/arch/x86/kernel/cpu/mtrr/cyrix.c +++ b/arch/x86/kernel/cpu/mtrr/cyrix.c @@ -147,10 +147,10 @@ static void prepare_set(void) write_cr0(cr0); wbinvd(); - /* Cyrix ARRs - everything else were excluded at the top */ + /* Cyrix ARRs - everything else was excluded at the top */ ccr3 = getCx86(CX86_CCR3); - /* Cyrix ARRs - everything else were excluded at the top */ + /* Cyrix ARRs - everything else was excluded at the top */ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); } diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 56f64e34829f..992f08dfbb6c 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -182,7 +182,7 @@ static inline void k8_enable_fixed_iorrs(void) /** * Checks and updates an fixed-range MTRR if it differs from the value it - * should have. If K8 extenstions are wanted, update the K8 SYSCFG MSR also. + * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also. * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information * \param msr MSR address of the MTTR which should be checked and updated * \param changed pointer which indicates whether the MTRR needed to be changed diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 5e4be30ff903..9abbdf7562c5 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -748,7 +748,7 @@ static int __init mtrr_init_finialize(void) if (use_intel()) mtrr_state_warn(); else { - /* The CPUs haven't MTRR and seemes not support SMP. They have + /* The CPUs haven't MTRR and seem to not support SMP. They have * specific drivers, we use a tricky method to support * suspend/resume for them. * TBD: is there any system with such CPU which supports -- cgit v1.2.1