From bb8985586b7a906e116db835c64773b7a7d51663 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Aug 2008 21:05:42 -0400 Subject: x86, um: ... and asm-x86 move Signed-off-by: Al Viro Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/system.h | 425 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 425 insertions(+) create mode 100644 arch/x86/include/asm/system.h (limited to 'arch/x86/include/asm/system.h') diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h new file mode 100644 index 000000000000..b20c894660f9 --- /dev/null +++ b/arch/x86/include/asm/system.h @@ -0,0 +1,425 @@ +#ifndef ASM_X86__SYSTEM_H +#define ASM_X86__SYSTEM_H + +#include +#include +#include +#include +#include + +#include +#include + +/* entries in ARCH_DLINFO: */ +#ifdef CONFIG_IA32_EMULATION +# define AT_VECTOR_SIZE_ARCH 2 +#else +# define AT_VECTOR_SIZE_ARCH 1 +#endif + +#ifdef CONFIG_X86_32 + +struct task_struct; /* one of the stranger aspects of C forward declarations */ +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next); + +/* + * Saving eflags is important. It switches not only IOPL between tasks, + * it also protects other tasks from NT leaking through sysenter etc. + */ +#define switch_to(prev, next, last) \ +do { \ + /* \ + * Context-switching clobbers all registers, so we clobber \ + * them explicitly, via unused output variables. \ + * (EAX and EBP is not listed because EBP is saved/restored \ + * explicitly for wchan access and EAX is the return value of \ + * __switch_to()) \ + */ \ + unsigned long ebx, ecx, edx, esi, edi; \ + \ + asm volatile("pushfl\n\t" /* save flags */ \ + "pushl %%ebp\n\t" /* save EBP */ \ + "movl %%esp,%[prev_sp]\n\t" /* save ESP */ \ + "movl %[next_sp],%%esp\n\t" /* restore ESP */ \ + "movl $1f,%[prev_ip]\n\t" /* save EIP */ \ + "pushl %[next_ip]\n\t" /* restore EIP */ \ + "jmp __switch_to\n" /* regparm call */ \ + "1:\t" \ + "popl %%ebp\n\t" /* restore EBP */ \ + "popfl\n" /* restore flags */ \ + \ + /* output parameters */ \ + : [prev_sp] "=m" (prev->thread.sp), \ + [prev_ip] "=m" (prev->thread.ip), \ + "=a" (last), \ + \ + /* clobbered output registers: */ \ + "=b" (ebx), "=c" (ecx), "=d" (edx), \ + "=S" (esi), "=D" (edi) \ + \ + /* input parameters: */ \ + : [next_sp] "m" (next->thread.sp), \ + [next_ip] "m" (next->thread.ip), \ + \ + /* regparm parameters for __switch_to(): */ \ + [prev] "a" (prev), \ + [next] "d" (next) \ + \ + : /* reloaded segment registers */ \ + "memory"); \ +} while (0) + +/* + * disable hlt during certain critical i/o operations + */ +#define HAVE_DISABLE_HLT +#else +#define __SAVE(reg, offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t" +#define __RESTORE(reg, offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t" + +/* frame pointer must be last for get_wchan */ +#define SAVE_CONTEXT "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t" +#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t" + +#define __EXTRA_CLOBBER \ + , "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \ + "r12", "r13", "r14", "r15" + +/* Save restore flags to clear handle leaking NT */ +#define switch_to(prev, next, last) \ + asm volatile(SAVE_CONTEXT \ + "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */ \ + "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */ \ + "call __switch_to\n\t" \ + ".globl thread_return\n" \ + "thread_return:\n\t" \ + "movq %%gs:%P[pda_pcurrent],%%rsi\n\t" \ + "movq %P[thread_info](%%rsi),%%r8\n\t" \ + LOCK_PREFIX "btr %[tif_fork],%P[ti_flags](%%r8)\n\t" \ + "movq %%rax,%%rdi\n\t" \ + "jc ret_from_fork\n\t" \ + RESTORE_CONTEXT \ + : "=a" (last) \ + : [next] "S" (next), [prev] "D" (prev), \ + [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \ + [ti_flags] "i" (offsetof(struct thread_info, flags)), \ + [tif_fork] "i" (TIF_FORK), \ + [thread_info] "i" (offsetof(struct task_struct, stack)), \ + [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent)) \ + : "memory", "cc" __EXTRA_CLOBBER) +#endif + +#ifdef __KERNEL__ +#define _set_base(addr, base) do { unsigned long __pr; \ +__asm__ __volatile__ ("movw %%dx,%1\n\t" \ + "rorl $16,%%edx\n\t" \ + "movb %%dl,%2\n\t" \ + "movb %%dh,%3" \ + :"=&d" (__pr) \ + :"m" (*((addr)+2)), \ + "m" (*((addr)+4)), \ + "m" (*((addr)+7)), \ + "0" (base) \ + ); } while (0) + +#define _set_limit(addr, limit) do { unsigned long __lr; \ +__asm__ __volatile__ ("movw %%dx,%1\n\t" \ + "rorl $16,%%edx\n\t" \ + "movb %2,%%dh\n\t" \ + "andb $0xf0,%%dh\n\t" \ + "orb %%dh,%%dl\n\t" \ + "movb %%dl,%2" \ + :"=&d" (__lr) \ + :"m" (*(addr)), \ + "m" (*((addr)+6)), \ + "0" (limit) \ + ); } while (0) + +#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base)) +#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1)) + +extern void native_load_gs_index(unsigned); + +/* + * Load a segment. Fall back on loading the zero + * segment if something goes wrong.. + */ +#define loadsegment(seg, value) \ + asm volatile("\n" \ + "1:\t" \ + "movl %k0,%%" #seg "\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\t" \ + "movl %k1, %%" #seg "\n\t" \ + "jmp 2b\n" \ + ".previous\n" \ + _ASM_EXTABLE(1b,3b) \ + : :"r" (value), "r" (0) : "memory") + + +/* + * Save a segment register away + */ +#define savesegment(seg, value) \ + asm("mov %%" #seg ",%0":"=r" (value) : : "memory") + +static inline unsigned long get_limit(unsigned long segment) +{ + unsigned long __limit; + asm("lsll %1,%0" : "=r" (__limit) : "r" (segment)); + return __limit + 1; +} + +static inline void native_clts(void) +{ + asm volatile("clts"); +} + +/* + * Volatile isn't enough to prevent the compiler from reordering the + * read/write functions for the control registers and messing everything up. + * A memory clobber would solve the problem, but would prevent reordering of + * all loads stores around it, which can hurt performance. Solution is to + * use a variable and mimic reads and writes to it to enforce serialization + */ +static unsigned long __force_order; + +static inline unsigned long native_read_cr0(void) +{ + unsigned long val; + asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order)); + return val; +} + +static inline void native_write_cr0(unsigned long val) +{ + asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order)); +} + +static inline unsigned long native_read_cr2(void) +{ + unsigned long val; + asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order)); + return val; +} + +static inline void native_write_cr2(unsigned long val) +{ + asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order)); +} + +static inline unsigned long native_read_cr3(void) +{ + unsigned long val; + asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order)); + return val; +} + +static inline void native_write_cr3(unsigned long val) +{ + asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order)); +} + +static inline unsigned long native_read_cr4(void) +{ + unsigned long val; + asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order)); + return val; +} + +static inline unsigned long native_read_cr4_safe(void) +{ + unsigned long val; + /* This could fault if %cr4 does not exist. In x86_64, a cr4 always + * exists, so it will never fail. */ +#ifdef CONFIG_X86_32 + asm volatile("1: mov %%cr4, %0\n" + "2:\n" + _ASM_EXTABLE(1b, 2b) + : "=r" (val), "=m" (__force_order) : "0" (0)); +#else + val = native_read_cr4(); +#endif + return val; +} + +static inline void native_write_cr4(unsigned long val) +{ + asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order)); +} + +#ifdef CONFIG_X86_64 +static inline unsigned long native_read_cr8(void) +{ + unsigned long cr8; + asm volatile("movq %%cr8,%0" : "=r" (cr8)); + return cr8; +} + +static inline void native_write_cr8(unsigned long val) +{ + asm volatile("movq %0,%%cr8" :: "r" (val) : "memory"); +} +#endif + +static inline void native_wbinvd(void) +{ + asm volatile("wbinvd": : :"memory"); +} + +#ifdef CONFIG_PARAVIRT +#include +#else +#define read_cr0() (native_read_cr0()) +#define write_cr0(x) (native_write_cr0(x)) +#define read_cr2() (native_read_cr2()) +#define write_cr2(x) (native_write_cr2(x)) +#define read_cr3() (native_read_cr3()) +#define write_cr3(x) (native_write_cr3(x)) +#define read_cr4() (native_read_cr4()) +#define read_cr4_safe() (native_read_cr4_safe()) +#define write_cr4(x) (native_write_cr4(x)) +#define wbinvd() (native_wbinvd()) +#ifdef CONFIG_X86_64 +#define read_cr8() (native_read_cr8()) +#define write_cr8(x) (native_write_cr8(x)) +#define load_gs_index native_load_gs_index +#endif + +/* Clear the 'TS' bit */ +#define clts() (native_clts()) + +#endif/* CONFIG_PARAVIRT */ + +#define stts() write_cr0(read_cr0() | X86_CR0_TS) + +#endif /* __KERNEL__ */ + +static inline void clflush(volatile void *__p) +{ + asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p)); +} + +#define nop() asm volatile ("nop") + +void disable_hlt(void); +void enable_hlt(void); + +void cpu_idle_wait(void); + +extern unsigned long arch_align_stack(unsigned long sp); +extern void free_init_pages(char *what, unsigned long begin, unsigned long end); + +void default_idle(void); + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + */ +#ifdef CONFIG_X86_32 +/* + * Some non-Intel clones support out of order store. wmb() ceases to be a + * nop for these. + */ +#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) +#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) +#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM) +#else +#define mb() asm volatile("mfence":::"memory") +#define rmb() asm volatile("lfence":::"memory") +#define wmb() asm volatile("sfence" ::: "memory") +#endif + +/** + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + **/ + +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#ifdef CONFIG_X86_PPRO_FENCE +# define smp_rmb() rmb() +#else +# define smp_rmb() barrier() +#endif +#ifdef CONFIG_X86_OOSTORE +# define smp_wmb() wmb() +#else +# define smp_wmb() barrier() +#endif +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) +#endif + +/* + * Stop RDTSC speculation. This is needed when you need to use RDTSC + * (or get_cycles or vread that possibly accesses the TSC) in a defined + * code region. + * + * (Could use an alternative three way for this if there was one.) + */ +static inline void rdtsc_barrier(void) +{ + alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC); + alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC); +} + +#endif /* ASM_X86__SYSTEM_H */ -- cgit v1.2.1