From 4187377b2411d43ea4470b35162917a5093857bf Mon Sep 17 00:00:00 2001 From: Eric Dujardin Date: Sat, 23 Feb 2008 22:51:28 -0700 Subject: [POWERPC] Add export for mpc52xx_set_psc_clkdiv mpc52xx_set_psc_clkdiv is needed by PSC device drivers. Signed-off-by: Eric Dujardin Signed-off-by: Grant Likely --- arch/powerpc/platforms/52xx/mpc52xx_common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 9aa4425d80b2..4d5fd1dbd400 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -199,6 +199,7 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv) return 0; } +EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv); /** * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer -- cgit v1.2.1 From d58831375d68a3bd39d5ebab9eca711fbb4ee108 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 26 Feb 2008 13:31:42 +1100 Subject: [POWERPC] spufs: fix context destruction during psmap fault We have a small window where a spu context may be destroyed while we're servicing a page fault (from another thread) to the context's problem state mapping. After we up_read() the mmap_sem, it's possible that the context is destroyed by its owning thread, and so the later references to ctx are invalid. This can maifest as a deadlock on the (now free()-ed) context state mutex. This change adds a reference to the context before we release the mmap_sem, so that the context cannot be destroyed. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/file.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c66c3756970d..f7a7e8635fb6 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -366,6 +366,13 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (offset >= ps_size) return NOPFN_SIGBUS; + /* + * Because we release the mmap_sem, the context may be destroyed while + * we're in spu_wait. Grab an extra reference so it isn't destroyed + * in the meantime. + */ + get_spu_context(ctx); + /* * We have to wait for context to be loaded before we have * pages to hand out to the user, but we don't want to wait @@ -375,7 +382,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, * hanged. */ if (spu_acquire(ctx)) - return NOPFN_REFAULT; + goto refault; if (ctx->state == SPU_STATE_SAVED) { up_read(¤t->mm->mmap_sem); @@ -391,6 +398,9 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (!ret) spu_release(ctx); + +refault: + put_spu_context(ctx); return NOPFN_REFAULT; } -- cgit v1.2.1 From e33eb074cb95783b4497327098e4128e9f8c15b9 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 20 Feb 2008 21:45:58 +1100 Subject: [POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as "405exr" compatible. This patch changes it to "405ex". The 405EX and 405EXr are identical exept that the 2nd PCIe and the 2nd EMAC interfaces are missing. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/haleakala.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 5dd3d15f0feb..ae68fefc01b6 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -235,7 +235,7 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex"; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; port = <0>; /* port number */ reg = Date: Fri, 22 Feb 2008 02:21:37 +1100 Subject: [POWERPC] 4xx: Fix L1 cache size in katmai DTS This patch changes the katmai (440SPe) L1 cache size to 32k. Some whitespace issues are cleaned up too. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/katmai.dts | 58 ++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index bc32ac7250ec..fc86e5a3afc4 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -38,8 +38,8 @@ timebase-frequency = <0>; /* Filled in by zImage */ i-cache-line-size = <20>; d-cache-line-size = <20>; - i-cache-size = <20000>; - d-cache-size = <20000>; + i-cache-size = <8000>; + d-cache-size = <8000>; dcr-controller; dcr-access-method = "native"; }; @@ -136,11 +136,11 @@ }; POB0: opb { - compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; - clock-frequency = <0>; /* Filled in by zImage */ + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; @@ -153,38 +153,38 @@ }; UART0: serial@10000200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000200 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; virtual-reg = ; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; - interrupt-parent = <&UIC0>; - interrupts = <0 4>; - }; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; UART1: serial@10000300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000300 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; virtual-reg = ; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <1 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; UART2: serial@10000600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000600 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; virtual-reg = ; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC1>; - interrupts = <5 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; IIC0: i2c@10000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; -- cgit v1.2.1 From c91f91e5fb04fc8fd8fa4b5e9d949031e631c107 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Wed, 27 Feb 2008 01:58:53 +1100 Subject: [POWERPC] 44x: add missing define TARGET_4xx and TARGET_440GX to cuboot-taishan In order to get the proper boad info (bd_info) structure defined in ppcboot.h both TARGET_4xx and TARGET_44x should be defined for all PowerPC 440 boards. The 440GX boards also need TARGET_440GX defined since they have 4 EMACs and there are 4 MAC addesses in bd_info passed by u-boot. Signed-off-by: Valentine Barshak Signed-off-by: Josh Boyer --- arch/powerpc/boot/cuboot-taishan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c index f66455a45ab1..b55b80467eed 100644 --- a/arch/powerpc/boot/cuboot-taishan.c +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -21,7 +21,9 @@ #include "dcr.h" #include "4xx.h" +#define TARGET_4xx #define TARGET_44x +#define TARGET_440GX #include "ppcboot.h" static bd_t bd; -- cgit v1.2.1 From 0111a701867a796a7ca6ecbc385e4befc9f35066 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Wed, 27 Feb 2008 19:08:13 +1100 Subject: [POWERPC] spufs: fix invalid scheduling of forgotten contexts At present, we have a situation where a context with no owner is re-scheduled by spu_forget: Thread 1: reading regs file Thread 2: context owner spu_forget() - ctx->owner = NULL - set SPU_SCHED_WAS_ACTIVE spu_acquire_saved() - context is in saved state spu_release_saved() - SPU_SCHED_WAS_ACTIVE is set, so spu_activate() the context, which now has no owner In spu_forget(), we shouldn't be requesting a re-schedule by setting SPU_SCHED_WAS_ACTIVE. This change removes the set_bit in spu_forget(), so that spu_release_saved() doesn't reinsert this destroyed context on to the run queue. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/context.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 133995ed5cc7..cf6c2c89211d 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -109,13 +109,12 @@ void spu_forget(struct spu_context *ctx) /* * This is basically an open-coded spu_acquire_saved, except that - * we don't acquire the state mutex interruptible. + * we don't acquire the state mutex interruptible, and we don't + * want this context to be rescheduled on release. */ mutex_lock(&ctx->state_mutex); - if (ctx->state != SPU_STATE_SAVED) { - set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); - } mm = ctx->owner; ctx->owner = NULL; -- cgit v1.2.1 From fe57e8be9e858b6d7af4e088cbbe718f51241eee Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Thu, 28 Feb 2008 08:16:27 -0600 Subject: [POWERPC] 4xx: Use correct board info structure in cuboot wrappers Correct the remaining 44x cuboot wrappers to define TARGET_4xx as well. This creates the correct structure to use, including things like the second MAC address. Signed-off-by: Josh Boyer --- arch/powerpc/boot/cuboot-bamboo.c | 1 + arch/powerpc/boot/cuboot-ebony.c | 1 + arch/powerpc/boot/cuboot-katmai.c | 1 + arch/powerpc/boot/cuboot-warp.c | 1 + 4 files changed, 4 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c index 900c7ff2b7e9..b5c30f766c40 100644 --- a/arch/powerpc/boot/cuboot-bamboo.c +++ b/arch/powerpc/boot/cuboot-bamboo.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c index c5f37ce172ea..56564ba37f62 100644 --- a/arch/powerpc/boot/cuboot-ebony.c +++ b/arch/powerpc/boot/cuboot-ebony.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c index c021167f9381..5434d70b5660 100644 --- a/arch/powerpc/boot/cuboot-katmai.c +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -22,6 +22,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index bdedebe1bc14..3db93e85e9ea 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -11,6 +11,7 @@ #include "4xx.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" -- cgit v1.2.1 From 71791bee90dd29b292c7e55c1c00857578c912bd Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 25 Feb 2008 14:58:37 +1100 Subject: [POWERPC] spufs: fix order of sputrace thread IDs Currently, we get the following output from sputrace: [5.097935954] 1606: spufs_ps_nopfn__enter (thread = 1605, spu = -1) [5.097958164] 1606: spufs_ps_nopfn__insert (thread = 1605, spu = 15) [5.097973529] 1607: spufs_ps_nopfn__enter (thread = 1605, spu = -1) [5.097989174] 1607: spufs_ps_nopfn__insert (thread = 1605, spu = 14) Which leads me to believe that 160[67] is the current thread ID, and 1605 is the context backing the psmap. However, the 'current' and 'owner' tids are reversed - the 'current' tid is on the right. This change puts the current thread ID in the left-hand column instead, and renames the right to 'ctxthread'. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sputrace.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 01974f7776e1..79aa773f3c99 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -58,12 +58,12 @@ static int sputrace_sprint(char *tbuf, int n) ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start)); return snprintf(tbuf, n, - "[%lu.%09lu] %d: %s (thread = %d, spu = %d)\n", + "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n", (unsigned long) tv.tv_sec, (unsigned long) tv.tv_nsec, - t->owner_tid, - t->name, t->curr_tid, + t->name, + t->owner_tid, t->number); } @@ -188,6 +188,7 @@ struct spu_probe spu_probes[] = { { "spufs_ps_nopfn__insert", "%p %p", spu_context_event }, { "spu_acquire_saved__enter", "%p", spu_context_nospu_event }, { "destroy_spu_context__enter", "%p", spu_context_nospu_event }, + { "spufs_stop_callback__enter", "%p %p", spu_context_event }, }; static int __init sputrace_init(void) -- cgit v1.2.1 From fae9ca791507876c3ccaa8ab686b2ce42dc7a560 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Feb 2008 15:16:48 +1100 Subject: [POWERPC] spufs: synchronize IRQ when disabling There is a small race between the context save procedure and the SPU interrupt handling, where we expect all interrupt processing to have finished after disabling them, while an interrupt is still being processed on another CPU. The obvious fix is to call synchronize_irq() after disabling the interrupts at the start of the context save procedure to make sure we never access the SPU any more during an ongoing save or even after that. Thanks to Benjamin Herrenschmidt for pointing this out. Acked-by: Benjamin Herrenschmidt Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/switch.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 6f5886c7b1f9..e9dc7a55d1b9 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -34,6 +34,7 @@ #include #include +#include #include #include #include @@ -117,6 +118,8 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) * Write INT_MASK_class1 with value of 0. * Save INT_Mask_class2 in CSA. * Write INT_MASK_class2 with value of 0. + * Synchronize all three interrupts to be sure + * we no longer execute a handler on another CPU. */ spin_lock_irq(&spu->register_lock); if (csa) { @@ -129,6 +132,9 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) spu_int_mask_set(spu, 2, 0ul); eieio(); spin_unlock_irq(&spu->register_lock); + synchronize_irq(spu->irqs[0]); + synchronize_irq(spu->irqs[1]); + synchronize_irq(spu->irqs[2]); } static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu) -- cgit v1.2.1 From cc4b7c1814c9ad375e8167ea4a9ec4a0ec1ada04 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 26 Feb 2008 07:01:56 +0100 Subject: [POWERPC] spufs: invalidate SLB translation before adding a new entry When we replace an SLB entry in the MFC after using up all the available entries, there is a short window in which an incorrect entry is marked as valid. The problem is that the 'valid' bit is stored in the ESID, which is always written after the VSID. Overwriting the VSID first will make the original ESID entry point to the new VSID, which means that any concurrent DMA accessing the old ESID ends up being redirected to the new virtual address. A few cycles later, we write the new ESID and everything is fine again. That race can be closed by writing a zero entry to the ESID first, which makes sure that the VSID is not accessed until we write the new ESID. Note that we don't actually need to invalidate the SLB entry using the invalidation register, which would also flush any ERAT entries for that segment, because the segment translation does not become invalid but is only removed from the SLB cache. Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 87eb07f94c5f..cfc28e93c825 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -148,7 +148,11 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb) __func__, slbe, slb->vsid, slb->esid); out_be64(&priv2->slb_index_W, slbe); + /* set invalid before writing vsid */ + out_be64(&priv2->slb_esid_RW, 0); + /* now it's safe to write the vsid */ out_be64(&priv2->slb_vsid_RW, slb->vsid); + /* setting the new esid makes the entry valid again */ out_be64(&priv2->slb_esid_RW, slb->esid); } -- cgit v1.2.1 From c92a1acb675058375cc508ad024c33358b42d766 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 28 Feb 2008 06:06:30 +0100 Subject: [POWERPC] spufs: serialize SLB invalidation against SLB loading There is a potential race between flushes of the entire SLB in the MFC and the point where new entries are being established. The problem is that we might put a ESID entry into the MFC SLB when the VSID entry has just been cleared by the global flush. This can be circumvented by holding the register_lock throughout both the flushing and the creation of SLB entries. Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index cfc28e93c825..712001f6b7da 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -81,9 +81,12 @@ struct spu_slb { void spu_invalidate_slbs(struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; + unsigned long flags; + spin_lock_irqsave(&spu->register_lock, flags); if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) out_be64(&priv2->slb_invalidate_all_W, 0UL); + spin_unlock_irqrestore(&spu->register_lock, flags); } EXPORT_SYMBOL_GPL(spu_invalidate_slbs); @@ -294,9 +297,11 @@ void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, nr_slbs++; } + spin_lock_irq(&spu->register_lock); /* Add the set of SLBs */ for (i = 0; i < nr_slbs; i++) spu_load_slb(spu, i, &slbs[i]); + spin_unlock_irq(&spu->register_lock); } EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs); @@ -341,13 +346,14 @@ spu_irq_class_1(int irq, void *data) if (stat & CLASS1_STORAGE_FAULT_INTR) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); - spin_unlock(&spu->register_lock); - pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, - dar, dsisr); if (stat & CLASS1_SEGMENT_FAULT_INTR) __spu_trap_data_seg(spu, dar); + spin_unlock(&spu->register_lock); + pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, + dar, dsisr); + if (stat & CLASS1_STORAGE_FAULT_INTR) __spu_trap_data_map(spu, dar, dsisr); -- cgit v1.2.1 From 2a58aa33daef37134c8a43dca0b7578c3fa7f993 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Mon, 25 Feb 2008 15:07:42 -0300 Subject: [POWERPC] spufs: fix use time accounting on SPE-overcommit The spu_runcntl_RW register is restored within spu_restore function. So, at the end of spu_bind_context, the SPU context is not just loaded, but running. This change corrects the state switch to account the time as USER. Signed-off-by: Andre Detsch Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 3a5972117de7..5d5f680cd0b8 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -246,7 +246,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) spu_switch_notify(spu, ctx); ctx->state = SPU_STATE_RUNNABLE; - spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); + spuctx_switch_state(ctx, SPU_UTIL_USER); } /* -- cgit v1.2.1 From 101fd46a753f8931a05d252bf5564c9415a5f8d7 Mon Sep 17 00:00:00 2001 From: Bob Nelson Date: Wed, 20 Feb 2008 05:00:56 +0100 Subject: [POWERPC] OProfile: enable callgraph support for Cell This patch enables OProfile callgraph support for the Cell processor. The original code was just calling a function to add the PC value, now it will call a function that first checks the callgraph depth. Callgraph is already enabled on the other Power platforms. Signed-off-by: Bob Nelson Signed-off-by: Arnd Bergmann --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 13929771bee7..9eed1f68fcab 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -1151,7 +1151,7 @@ static void cell_handle_interrupt(struct pt_regs *regs, for (i = 0; i < num_counters; ++i) { if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i)) && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); cbe_write_ctr(cpu, i, reset_value[i]); } } -- cgit v1.2.1 From 9176c0b1f5a9099cebc07458042ae6a7c75af7b2 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 28 Feb 2008 11:26:21 +0100 Subject: [POWERPC] move celleb DABRX definitions This moves the private DABRX definitions for celleb from beat.h to reg.h to make them usable for all. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/celleb/beat.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h index b2e292df13ca..ac82ac35b991 100644 --- a/arch/powerpc/platforms/celleb/beat.h +++ b/arch/powerpc/platforms/celleb/beat.h @@ -21,9 +21,6 @@ #ifndef _CELLEB_BEAT_H #define _CELLEB_BEAT_H -#define DABRX_KERNEL (1UL<<1) -#define DABRX_USER (1UL<<0) - int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*); int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t); int64_t beat_repository_encode(int, const char *, uint64_t[4]); -- cgit v1.2.1 From f3c1ed9720ec62626bbf3e0c3648568c131978e2 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 28 Feb 2008 11:27:31 +0100 Subject: [POWERPC] enable hardware watchpoints on cell blades Ulrich Weigand has found that the hardware watchpoints on cell were not working back in November : http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046135.html This patch sets them during initialization. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index a7f609b3b876..dda34650cb07 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -149,6 +149,11 @@ static void __init cell_init_irq(void) mpic_init_IRQ(); } +static void __init cell_set_dabrx(void) +{ + mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); +} + static void __init cell_setup_arch(void) { #ifdef CONFIG_SPU_BASE @@ -158,6 +163,8 @@ static void __init cell_setup_arch(void) cbe_regs_init(); + cell_set_dabrx(); + #ifdef CONFIG_CBE_RAS cbe_ras_init(); #endif -- cgit v1.2.1 From f9660e8a6c16e17935777cdee5194842904c2d72 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:22 +1100 Subject: [POWERPC] Clearup cell IOMMU fixed mapping terminology It's called the fixed mapping, not the static mapping. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index edab631a8dcb..bbe838996470 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -549,7 +549,7 @@ static void cell_dma_dev_setup_iommu(struct device *dev) archdata->dma_data = &window->table; } -static void cell_dma_dev_setup_static(struct device *dev); +static void cell_dma_dev_setup_fixed(struct device *dev); static void cell_dma_dev_setup(struct device *dev) { @@ -557,7 +557,7 @@ static void cell_dma_dev_setup(struct device *dev) /* Order is important here, these are not mutually exclusive */ if (get_dma_ops(dev) == &dma_iommu_fixed_ops) - cell_dma_dev_setup_static(dev); + cell_dma_dev_setup_fixed(dev); else if (get_pci_dma_ops() == &dma_iommu_ops) cell_dma_dev_setup_iommu(dev); else if (get_pci_dma_ops() == &dma_direct_ops) @@ -858,7 +858,7 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask) return 0; } -static void cell_dma_dev_setup_static(struct device *dev) +static void cell_dma_dev_setup_fixed(struct device *dev) { struct dev_archdata *archdata = &dev->archdata; u64 addr; @@ -894,7 +894,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) { /* Don't touch the dynamic region */ if (i >= dbase && i < (dbase + dsize)) { - pr_debug("iommu: static/dynamic overlap, skipping\n"); + pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); -- cgit v1.2.1 From 0d7386ebffd8506b28c37a7d5541132a576f64e2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:23 +1100 Subject: [POWERPC] Use it_offset not pte_offset in cell IOMMU code The cell IOMMU tce build and free routines use pte_offset to convert the index passed from the generic IOMMU code into a page table offset. This takes into account the SPIDER_DMA_OFFSET which sets the top bit of every DMA address. However it doesn't cater for the IOMMU window starting at a non-zero address, as the base of the window is not incorporated into pte_offset at all. As it turns out tbl->it_offset already contains the value we need, it takes into account the base of the window and also pte_offset. So use it instead! Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index bbe838996470..4e75919bf6b9 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -200,7 +200,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages, (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); @@ -232,7 +232,7 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages) | (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++) io_pte[i] = pte; -- cgit v1.2.1 From 08e024272e529076663e5b4dc8eeecd4131f8a48 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:23 +1100 Subject: [POWERPC] Remove unused pte_offset variable The cell IOMMU code no longer needs to save the pte_offset variable separately, it is incorporated into tbl->it_offset. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 4e75919bf6b9..555d264ad568 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -123,7 +123,6 @@ struct iommu_window { struct cbe_iommu *iommu; unsigned long offset; unsigned long size; - unsigned long pte_offset; unsigned int ioid; struct iommu_table table; }; @@ -475,13 +474,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, window->size = size; window->ioid = ioid; window->iommu = iommu; - window->pte_offset = pte_offset; window->table.it_blocksize = 16; window->table.it_base = (unsigned long)iommu->ptab; window->table.it_index = iommu->nid; - window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + - window->pte_offset; + window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset; window->table.it_size = size >> IOMMU_PAGE_SHIFT; iommu_init_table(&window->table, iommu->nid); -- cgit v1.2.1 From edf441fb80f9d7a962c298e8da94c8c64802fffa Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:24 +1100 Subject: [POWERPC] Move allocation of cell IOMMU pad page There's no need to allocate the pad page unless we're going to actually use it - so move the allocation to where we know we're going to use it. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 555d264ad568..8e57e1af3785 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -344,12 +344,6 @@ static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, iommu->ptab = page_address(page); memset(iommu->ptab, 0, ptab_size); - /* allocate a bogus page for the end of each mapping */ - page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); - BUG_ON(!page); - iommu->pad_page = page_address(page); - clear_page(iommu->pad_page); - /* number of pages needed for a page table */ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; @@ -463,6 +457,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, unsigned long pte_offset) { struct iommu_window *window; + struct page *page; u32 ioid; ioid = cell_iommu_get_ioid(np); @@ -501,6 +496,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, * This code also assumes that we have a window that starts at 0, * which is the case on all spider based blades. */ + page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); + BUG_ON(!page); + iommu->pad_page = page_address(page); + clear_page(iommu->pad_page); + __set_bit(0, window->table.it_map); tce_build_cell(&window->table, window->table.it_offset, 1, (unsigned long)iommu->pad_page, DMA_TO_DEVICE); -- cgit v1.2.1 From 7d432ff1b7db87e78eb74d42631d2a23ca6f26f2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:25 +1100 Subject: [POWERPC] Split setup of IOMMU stab and ptab, allocate dynamic/fixed ptabs separately Currently the cell IOMMU code allocates the entire IOMMU page table in a contiguous chunk. This is nice and tidy, but for machines with larger amounts of RAM the page table allocation can fail due to it simply being too large. So split the segment table and page table setup routine, and arrange to have the dynamic and fixed page tables allocated separately. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 69 +++++++++++++++++++++++-------------- 1 file changed, 43 insertions(+), 26 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 8e57e1af3785..187a723eafcd 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -306,50 +306,54 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base) return -ENODEV; } -static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, +static void cell_iommu_setup_stab(struct cbe_iommu *iommu, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { struct page *page; - int i; - unsigned long reg, segments, pages_per_segment, ptab_size, stab_size, - n_pte_pages, base; - - base = dbase; - if (fsize != 0) - base = min(fbase, dbase); + unsigned long segments, stab_size; segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; - pages_per_segment = 1ull << IO_PAGENO_BITS; - pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n", - __FUNCTION__, iommu->nid, segments, pages_per_segment); + pr_debug("%s: iommu[%d]: segments: %lu\n", + __FUNCTION__, iommu->nid, segments); /* set up the segment table */ stab_size = segments * sizeof(unsigned long); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); BUG_ON(!page); iommu->stab = page_address(page); - clear_page(iommu->stab); + memset(iommu->stab, 0, stab_size); +} + +static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, + unsigned long base, unsigned long size, unsigned long gap_base, + unsigned long gap_size) +{ + struct page *page; + int i; + unsigned long reg, segments, pages_per_segment, ptab_size, + n_pte_pages, start_seg, *ptab; + + start_seg = base >> IO_SEGMENT_SHIFT; + segments = size >> IO_SEGMENT_SHIFT; + pages_per_segment = 1ull << IO_PAGENO_BITS; - /* ... and the page tables. Since these are contiguous, we can treat - * the page tables as one array of ptes, like pSeries does. - */ ptab_size = segments * pages_per_segment * sizeof(unsigned long); pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, iommu->nid, ptab_size, get_order(ptab_size)); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); BUG_ON(!page); - iommu->ptab = page_address(page); - memset(iommu->ptab, 0, ptab_size); + ptab = page_address(page); + memset(ptab, 0, ptab_size); /* number of pages needed for a page table */ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", - __FUNCTION__, iommu->nid, iommu->stab, iommu->ptab, + __FUNCTION__, iommu->nid, iommu->stab, ptab, n_pte_pages); /* initialise the STEs */ @@ -364,12 +368,21 @@ static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, __unknown_page_size_error(); } + gap_base = gap_base >> IO_SEGMENT_SHIFT; + gap_size = gap_size >> IO_SEGMENT_SHIFT; + pr_debug("Setting up IOMMU stab:\n"); - for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) { - iommu->stab[i] = reg | - (__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i); + for (i = start_seg; i < (start_seg + segments); i++) { + if (i >= gap_base && i < (gap_base + gap_size)) { + pr_debug("\toverlap at %d, skipping\n", i); + continue; + } + iommu->stab[i] = reg | (__pa(ptab) + n_pte_pages * + IOMMU_PAGE_SIZE * (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } + + return ptab; } static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) @@ -416,7 +429,8 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { - cell_iommu_setup_page_tables(iommu, base, size, 0, 0); + cell_iommu_setup_stab(iommu, base, size, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0); cell_iommu_enable_hardware(iommu); } @@ -870,8 +884,10 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { - unsigned long base_pte, uaddr, *io_pte; int i; + unsigned long base_pte, uaddr, *io_pte, *ptab; + + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize); dma_iommu_fixed_base = fbase; @@ -883,7 +899,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - io_pte = iommu->ptab; + io_pte = ptab; base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); @@ -894,7 +910,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } - io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + io_pte[i - fbase] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); } mb(); @@ -992,7 +1008,8 @@ static int __init cell_iommu_fixed_mapping_init(void) "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, dbase + dsize, fbase, fbase + fsize); - cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize); + cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); + iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); -- cgit v1.2.1 From 3d3e6da17d6af42a3fd4891fb09d93dca002e590 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:26 +1100 Subject: [POWERPC] Cell IOMMU: n_pte_pages is in 4K page units, not IOMMU_PAGE_SIZE We use n_pte_pages to calculate the stride through the page tables, but we also use it to set the NPPT value in the segment table entry. That is defined as the number of 4K pages per segment, so we should calculate it as such regardless of the IOMMU page size. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 187a723eafcd..7a861cb960d2 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -348,9 +348,8 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, ptab = page_address(page); memset(ptab, 0, ptab_size); - /* number of pages needed for a page table */ - n_pte_pages = (pages_per_segment * - sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; + /* number of 4K pages needed for a page table */ + n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", __FUNCTION__, iommu->nid, iommu->stab, ptab, @@ -377,8 +376,8 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, pr_debug("\toverlap at %d, skipping\n", i); continue; } - iommu->stab[i] = reg | (__pa(ptab) + n_pte_pages * - IOMMU_PAGE_SIZE * (i - start_seg)); + iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * + (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } -- cgit v1.2.1 From 225d49050f9b6506f2f9df6b40e591ee93939d11 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:27 +1100 Subject: [POWERPC] Allow for different IOMMU page sizes in cell IOMMU code Make some preliminary changes to cell_iommu_alloc_ptab() to allow it to take the page size as a parameter rather than assuming IOMMU_PAGE_SIZE. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 7a861cb960d2..b0e347e4933a 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -113,7 +113,7 @@ /* IOMMU sizing */ #define IO_SEGMENT_SHIFT 28 -#define IO_PAGENO_BITS (IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT) +#define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) /* The high bit needs to be set on every DMA address */ #define SPIDER_DMA_OFFSET 0x80000000ul @@ -328,7 +328,7 @@ static void cell_iommu_setup_stab(struct cbe_iommu *iommu, static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, unsigned long base, unsigned long size, unsigned long gap_base, - unsigned long gap_size) + unsigned long gap_size, unsigned long page_shift) { struct page *page; int i; @@ -337,7 +337,10 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, start_seg = base >> IO_SEGMENT_SHIFT; segments = size >> IO_SEGMENT_SHIFT; - pages_per_segment = 1ull << IO_PAGENO_BITS; + pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); + /* PTEs for each segment must start on a 4K bounday */ + pages_per_segment = max(pages_per_segment, + (1 << 12) / sizeof(unsigned long)); ptab_size = segments * pages_per_segment * sizeof(unsigned long); pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, @@ -358,13 +361,12 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, /* initialise the STEs */ reg = IOSTE_V | ((n_pte_pages - 1) << 5); - if (IOMMU_PAGE_SIZE == 0x1000) - reg |= IOSTE_PS_4K; - else if (IOMMU_PAGE_SIZE == 0x10000) - reg |= IOSTE_PS_64K; - else { - extern void __unknown_page_size_error(void); - __unknown_page_size_error(); + switch (page_shift) { + case 12: reg |= IOSTE_PS_4K; break; + case 16: reg |= IOSTE_PS_64K; break; + case 20: reg |= IOSTE_PS_1M; break; + case 24: reg |= IOSTE_PS_16M; break; + default: BUG(); } gap_base = gap_base >> IO_SEGMENT_SHIFT; @@ -429,7 +431,8 @@ static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { cell_iommu_setup_stab(iommu, base, size, 0, 0); - iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_enable_hardware(iommu); } @@ -886,7 +889,8 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, int i; unsigned long base_pte, uaddr, *io_pte, *ptab; - ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize); + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, + IOMMU_PAGE_SHIFT); dma_iommu_fixed_base = fbase; @@ -1008,7 +1012,8 @@ static int __init cell_iommu_fixed_mapping_init(void) dbase + dsize, fbase, fbase + fsize); cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); - iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); -- cgit v1.2.1 From da40451bba23b51eaca4170a095891646ce72104 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:29 +1100 Subject: [POWERPC] Convert the cell IOMMU fixed mapping to 16M IOMMU pages The only tricky part is we need to adjust the PTE insertion loop to cater for holes in the page table. The PTEs for each segment start on a 4K boundary, so with 16M pages we have 16 PTEs per segment and then a gap to the next 4K page boundary. It might be possible to allocate the PTEs for each segment separately, saving the memory currently filling the gaps. However we'd need to check that's OK with the hardware, and that it actually saves memory. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index b0e347e4933a..20ea0e118f24 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -882,38 +882,45 @@ static void cell_dma_dev_setup_fixed(struct device *dev) dev_dbg(dev, "iommu: fixed addr = %lx\n", addr); } +static void insert_16M_pte(unsigned long addr, unsigned long *ptab, + unsigned long base_pte) +{ + unsigned long segment, offset; + + segment = addr >> IO_SEGMENT_SHIFT; + offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); + ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); + + pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", + addr, ptab, segment, offset); + + ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask); +} + static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { - int i; - unsigned long base_pte, uaddr, *io_pte, *ptab; + unsigned long base_pte, uaddr, ioaddr, *ptab; - ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, - IOMMU_PAGE_SHIFT); + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); dma_iommu_fixed_base = fbase; - /* convert from bytes into page table indices */ - dbase = dbase >> IOMMU_PAGE_SHIFT; - dsize = dsize >> IOMMU_PAGE_SHIFT; - fbase = fbase >> IOMMU_PAGE_SHIFT; - fsize = fsize >> IOMMU_PAGE_SHIFT; - pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - io_pte = ptab; base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); - uaddr = 0; - for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) { + for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { /* Don't touch the dynamic region */ - if (i >= dbase && i < (dbase + dsize)) { + ioaddr = uaddr + fbase; + if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } - io_pte[i - fbase] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + + insert_16M_pte(uaddr, ptab, base_pte); } mb(); -- cgit v1.2.1 From 9edddaa200df18e08fe0cf21036e8ae467b1363c Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Tue, 4 Mar 2008 14:28:37 -0800 Subject: Kprobes: indicate kretprobe support in Kconfig Add CONFIG_HAVE_KRETPROBES to the arch//Kconfig file for relevant architectures with kprobes support. This facilitates easy handling of in-kernel modules (like samples/kprobes/kretprobe_example.c) that depend on kretprobes being present in the kernel. Thanks to Sam Ravnborg for helping make the patch more lean. Per Mathieu's suggestion, added CONFIG_KRETPROBES and fixed up dependencies. Signed-off-by: Ananth N Mavinakayanahalli Acked-by: Mathieu Desnoyers Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5b8d8382b762..1189d8d6170d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -90,6 +90,7 @@ config PPC select HAVE_IDE select HAVE_OPROFILE select HAVE_KPROBES + select HAVE_KRETPROBES config EARLY_PRINTK bool -- cgit v1.2.1 From 28b958859206b7010d03129611c2e444898e3ee4 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 6 Mar 2008 18:42:26 +0800 Subject: [POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts Due to chip constraint MPC837x USB DR module can only use ULPI and serial PHY interfaces. The patch fixes the wrong type in dts. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_mds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8378_mds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8379_mds.dts | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index a3637fff73cc..677a0615eb00 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -91,7 +91,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +98,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 533e9b06cc8f..3f9e9fe4b5aa 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -91,7 +91,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +98,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index c270685bbde4..36c1c13f0517 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -91,7 +91,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +98,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { -- cgit v1.2.1 From d7f46190ef1048e48f71c8a7a60c2881c437d08d Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 6 Mar 2008 18:42:35 +0800 Subject: [POWERPC] 83xx: Add local bus device nodes to MPC837xMDS device trees. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_mds.dts | 66 +++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8378_mds.dts | 66 +++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8379_mds.dts | 66 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc837x_mds.c | 8 ++-- 4 files changed, 201 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 677a0615eb00..49c05e97386c 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 3f9e9fe4b5aa..1d6ea080ad73 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 36c1c13f0517..fdb4a9255b24 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 8a9c26973605..64d17b0d6455 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -39,12 +39,9 @@ static int mpc837xmds_usb_cfg(void) if (ret) return ret; /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); + np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr"); if (np) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start + 1); + bcsr_regs = of_iomap(np, 0); of_node_put(np); } if (!bcsr_regs) @@ -96,6 +93,7 @@ static void __init mpc837x_mds_setup_arch(void) static struct of_device_id mpc837x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; -- cgit v1.2.1 From 76db5bd26f2d79712459bf80ce0e5c0c5c31b769 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 6 Mar 2008 13:53:30 +0300 Subject: [POWERPC] 8xx: fix swap This makes swap routines operate correctly on the ppc_8xx based machines. Code has been revalidated on mpc885ads (8M sdram) with recent kernel. Based on patch from Yuri Tikhonov to do the same on arch/ppc instance. Recent kernel's size makes swap feature very important on low-memory platforms, those are actually non-operable without it. Signed-off-by: Yuri Tikhonov Signed-off-by: Vitaly Bordug Signed-off-by: Kumar Gala --- arch/powerpc/kernel/head_8xx.S | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index f7458396cd7c..3c9452d4308b 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -332,8 +332,18 @@ InstructionTLBMiss: mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ lwz r10, 0(r11) /* Get the pte */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED + mfspr r11, SPRN_MD_TWC /* get the pte address again */ + stw r10, 0(r11) +4: +#else ori r10, r10, _PAGE_ACCESSED stw r10, 0(r11) +#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 21, 22 and 28 must be clear. @@ -398,8 +408,17 @@ DataStoreTLBMiss: DO_8xx_CPU6(0x3b80, r3) mtspr SPRN_MD_TWC, r11 - mfspr r11, SPRN_MD_TWC /* get the pte address again */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f ori r10, r10, _PAGE_ACCESSED +4: + /* and update pte in table */ +#else + ori r10, r10, _PAGE_ACCESSED +#endif + mfspr r11, SPRN_MD_TWC /* get the pte address again */ stw r10, 0(r11) /* The Linux PTE won't go exactly into the MMU TLB. @@ -507,7 +526,16 @@ DataTLBError: /* Update 'changed', among others. */ +#ifdef CONFIG_SWAP + ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED +4: +#else ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE +#endif mfspr r11, SPRN_MD_TWC /* Get pte address again */ stw r10, 0(r11) /* and update pte in table */ -- cgit v1.2.1 From a55387e5ad903dec4e281907e4d8e74679ae60e2 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 20 Feb 2008 12:33:38 -0600 Subject: [POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs. This fixes the following bug: http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html Separate defconfigs are no longer needed now that CONFIG_DEVICE_TREE is gone. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/boot/wrapper | 6 +- arch/powerpc/configs/adder875-redboot_defconfig | 798 ----------------------- arch/powerpc/configs/adder875-uboot_defconfig | 798 ----------------------- arch/powerpc/configs/adder875_defconfig | 813 ++++++++++++++++++++++++ 4 files changed, 818 insertions(+), 1597 deletions(-) delete mode 100644 arch/powerpc/configs/adder875-redboot_defconfig delete mode 100644 arch/powerpc/configs/adder875-uboot_defconfig create mode 100644 arch/powerpc/configs/adder875_defconfig (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index c3178155311b..d50e498a072b 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -191,10 +191,14 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc|ep405|redboot*|ep8248e) +ep88xc|ep405|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; +adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" diff --git a/arch/powerpc/configs/adder875-redboot_defconfig b/arch/powerpc/configs/adder875-redboot_defconfig deleted file mode 100644 index cab5f9b64567..000000000000 --- a/arch/powerpc/configs/adder875-redboot_defconfig +++ /dev/null @@ -1,798 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 17 16:17:38 2008 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -# CONFIG_PPC_85xx is not set -CONFIG_PPC_8xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_8xx=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_IRQ_PER_CPU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_REDBOOT=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# Platform support -# -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -CONFIG_CPM1=y -# CONFIG_MPC8XXFADS is not set -# CONFIG_MPC86XADS is not set -# CONFIG_MPC885ADS is not set -# CONFIG_PPC_EP88XC is not set -CONFIG_PPC_ADDER875=y - -# -# MPC8xx CPM Options -# - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -# CONFIG_8xx_CPU6 is not set -CONFIG_8xx_CPU15=y -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y -# CONFIG_FSL_ULI1575 is not set -CONFIG_CPM=y - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_8XX_MINIMAL_FPEMU is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_PROC_DEVICETREE is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -# CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="adder875-redboot.dts" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_PCI_QSPAN is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_CFI_FLAGADM is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -CONFIG_OF_DEVICE=y -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -CONFIG_DAVICOM_PHY=y -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_SCC is not set -CONFIG_FS_ENET_HAS_FEC=y -CONFIG_FS_ENET_MDIO_FEC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/adder875-uboot_defconfig b/arch/powerpc/configs/adder875-uboot_defconfig deleted file mode 100644 index 1faf7ef59a23..000000000000 --- a/arch/powerpc/configs/adder875-uboot_defconfig +++ /dev/null @@ -1,798 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 17 16:17:18 2008 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -# CONFIG_PPC_85xx is not set -CONFIG_PPC_8xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_8xx=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_IRQ_PER_CPU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_REDBOOT=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# Platform support -# -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -CONFIG_CPM1=y -# CONFIG_MPC8XXFADS is not set -# CONFIG_MPC86XADS is not set -# CONFIG_MPC885ADS is not set -# CONFIG_PPC_EP88XC is not set -CONFIG_PPC_ADDER875=y - -# -# MPC8xx CPM Options -# - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -# CONFIG_8xx_CPU6 is not set -CONFIG_8xx_CPU15=y -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y -# CONFIG_FSL_ULI1575 is not set -CONFIG_CPM=y - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_8XX_MINIMAL_FPEMU is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_PROC_DEVICETREE is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -# CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="adder875-uboot.dts" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_PCI_QSPAN is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_CFI_FLAGADM is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -CONFIG_OF_DEVICE=y -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -CONFIG_DAVICOM_PHY=y -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_SCC is not set -CONFIG_FS_ENET_HAS_FEC=y -CONFIG_FS_ENET_MDIO_FEC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig new file mode 100644 index 000000000000..a3cc94a2ff06 --- /dev/null +++ b/arch/powerpc/configs/adder875_defconfig @@ -0,0 +1,813 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc2 +# Wed Feb 20 12:26:07 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_REDBOOT=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +# CONFIG_MPC86XADS is not set +# CONFIG_MPC885ADS is not set +# CONFIG_PPC_EP88XC is not set +CONFIG_PPC_ADDER875=y + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_CPU6 is not set +CONFIG_8xx_CPU15=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set +# CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_8XX_MINIMAL_FPEMU is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCI_QSPAN is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xfd000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_CFI_FLAGADM is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FEC=y +CONFIG_FS_ENET_MDIO_FEC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y -- cgit v1.2.1 From 6f913160fa8e8de5ea2746a2f6b1d65c67e092b0 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 3 Mar 2008 11:11:30 -0600 Subject: [POWERPC] QE: Fix QE firmware uploading limit Fix a typo in qe_upload_firmware() that prevented uploading firmware on systems with more than one RISC core. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/qe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 6efbd5e5bb1b..f963fbf21ef0 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -509,7 +509,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware) } /* Validate some of the fields */ - if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) { + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { printk(KERN_ERR "qe-firmware: invalid data\n"); return -EINVAL; } -- cgit v1.2.1 From 3e0d65bf6d5b464949b749a8da7977f6b197d301 Mon Sep 17 00:00:00 2001 From: Jeremy McNicoll Date: Fri, 7 Mar 2008 15:14:09 -0500 Subject: [POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map The following patch allows interrupts to occur on the sbc8548. Currently PCI and PCI-X devices get assigned an IRQ but the interrupt count never increases. This solves the problem and adds PCI support as well. Signed-off-by: Jeremy McNicoll Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8548.dts | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 14be38ad5d4b..b86e65d926c1 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -184,11 +184,17 @@ cell-index = <0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) */ - 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>; + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; interrupts = <0x18 0x2>; -- cgit v1.2.1 From ad562c71592ae76440c27bba9bfa9c16cc851560 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 7 Mar 2008 17:59:03 -0600 Subject: [POWERPC] 83xx: Make 83xx perfmon support selectable Not all e300 cores support the performance monitors, and the ones that don't will be confused by the mf/mtpmr instructions. This allows the support to be optional, so the 8349 can turn it off while the 8379 can turn it on. Sadly, those aren't config options, so it will be left to the defconfigs and the users to make that determination. Signed-off-by: Andy Fleming Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 1 - arch/powerpc/platforms/Kconfig.cputype | 7 ++++++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 0afd22595546..a578b966ecbc 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -22,7 +22,6 @@ config PPC_83xx select FSL_SOC select MPC83xx select IPIC - select FSL_EMB_PERFMON config PPC_86xx bool "Freescale 86xx" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 73d81ce14b67..0c3face0ddbb 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -113,7 +113,12 @@ config FSL_BOOKE default y config FSL_EMB_PERFMON - bool + bool "Freescale Embedded Perfmon" + depends on E500 || PPC_83xx + help + This is the Performance Monitor support found on the e500 core + and some e300 cores (c3 and c4). Select this only if your + core supports the Embedded Performance Monitor APU config PTE_64BIT bool -- cgit v1.2.1 From 86f4e5d4335556191b436b41b0ad2f719c4a98d4 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Fri, 7 Mar 2008 19:27:59 +0200 Subject: [POWERPC] QE: Make qe_get_firmware_info reentrant The function was returning NULL the second time it was called if the firmware was uploaded from the boot loader or the first time it was called if the firmware was uploaded from the kernel. Signed-off-by: Ionut Nicu Acked-By: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/qe.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index f963fbf21ef0..cc81fd1141b0 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -609,7 +609,10 @@ struct qe_firmware_info *qe_get_firmware_info(void) * If we haven't checked yet, and a driver hasn't uploaded a firmware * yet, then check the device tree for information. */ - if (initialized || qe_firmware_uploaded) + if (qe_firmware_uploaded) + return &qe_firmware_info; + + if (initialized) return NULL; initialized = 1; -- cgit v1.2.1 From ce7c191bca88aa2f942f70a6d6c6315739a81a32 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 4 Mar 2008 20:17:02 +1100 Subject: [POWERPC] spufs: don't (ab)use SCHED_IDLE commit 4ef11014 introduced a usage of SCHED_IDLE to detect when a context is within spu_run. Instead of SCHED_IDLE (which has other meaning), add a flag to sched_flags to tell if a context should be running. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/run.c | 3 ++- arch/powerpc/platforms/cell/spufs/sched.c | 4 ++-- arch/powerpc/platforms/cell/spufs/spufs.h | 1 + 3 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 6221968c2a3c..cac69e116776 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -220,6 +220,7 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc) } } + set_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); return 0; } @@ -234,7 +235,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc, *npc = ctx->ops->npc_read(ctx); spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); - ctx->policy = SCHED_IDLE; + clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); spu_release(ctx); if (signal_pending(current)) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 5d5f680cd0b8..00528ef84ad2 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -867,7 +867,7 @@ static noinline void spusched_tick(struct spu_context *ctx) if (ctx->policy == SCHED_FIFO) goto out; - if (--ctx->time_slice && ctx->policy != SCHED_IDLE) + if (--ctx->time_slice && test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) goto out; spu = ctx->spu; @@ -877,7 +877,7 @@ static noinline void spusched_tick(struct spu_context *ctx) new = grab_runnable_context(ctx->prio + 1, spu->node); if (new) { spu_unschedule(spu, ctx); - if (ctx->policy != SCHED_IDLE) + if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_add_to_rq(ctx); } else { spu_context_nospu_trace(spusched_tick__newslice, ctx); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 2c2fe3c07d72..cdc515182f82 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -44,6 +44,7 @@ struct spu_gang; enum { SPU_SCHED_NOTIFY_ACTIVE, SPU_SCHED_WAS_ACTIVE, /* was active upon spu_acquire_saved() */ + SPU_SCHED_SPU_RUN, /* context is within spu_run */ }; struct spu_context { -- cgit v1.2.1 From c368392a9951e6e25e2e2f9268153f1e9365e2c2 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 11 Mar 2008 12:46:18 +1100 Subject: [POWERPC] spufs: fix rescheduling of non-runnable contexts At present, we can hit the BUG_ON in __spu_update_sched_info by reading the regs file of a context between two calls to spu_run. The spu_release_saved called by spufs_regs_read() is resulting in the (now non-runnable) context being placed back on the run queue, so the next call to spu_run ends up in the bug condition. This change uses the SPU_SCHED_SPU_RUN flag to only reschedule a context if it's still in spu_run(). Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/context.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index cf6c2c89211d..0ad83aeb70b1 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -170,7 +170,8 @@ void spu_release_saved(struct spu_context *ctx) { BUG_ON(ctx->state != SPU_STATE_SAVED); - if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags)) + if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags) && + test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_activate(ctx, 0); spu_release(ctx); -- cgit v1.2.1 From 95ff54f5176a36f65522e46c670a571728328b10 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 13 Mar 2008 09:39:55 +1100 Subject: [POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels Some drivers (such as V4L2) have code that causes gcc to generate calls to __ucmpdi2 when compiling for 32-bit powerpc, which results in either a link-time error or a module that can't be loaded, as we don't currently have a __ucmpdi2. This adds one so these drivers can be used. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/misc_32.S | 15 +++++++++++++++ arch/powerpc/kernel/ppc_ksyms.c | 2 ++ 2 files changed, 17 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 5c2e253ddfb1..9d2c56621f1e 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -785,6 +785,21 @@ _GLOBAL(__lshrdi3) or r4,r4,r7 # LSW |= t2 blr +/* + * 64-bit comparison: __ucmpdi2(u64 a, u64 b) + * Returns 0 if a < b, 1 if a == b, 2 if a > b. + */ +_GLOBAL(__ucmpdi2) + cmplw r3,r5 + li r3,1 + bne 1f + cmplw r4,r6 + beqlr +1: li r3,0 + bltlr + li r3,2 + blr + _GLOBAL(abs) srawi r4,r3,31 xor r3,r3,r4 diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index aa9ff35b0e63..3e52122c5073 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -149,6 +149,8 @@ long long __lshrdi3(long long, int); EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__lshrdi3); +int __ucmpdi2(unsigned long long, unsigned long long); +EXPORT_SYMBOL(__ucmpdi2); #endif EXPORT_SYMBOL(memcpy); -- cgit v1.2.1 From 595be948cce574ff2d5dde5d0426a636a4363c70 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 22 Feb 2008 05:57:07 +1100 Subject: [POWERPC] Fix zImage-dtb.initrd build error The pattern substitution rules were failing when used with zImage-dtb targets. If zImage-dtb.initrd was selected, the pattern substitution would generate "zImage.initrd-dtb" instead of "zImage-dtb.initrd" which caused the build to fail. This renames zImage-dtb to dtbImage to avoid the problem entirely. By not using the zImage prefix then is no potential for namespace collisions. Signed-off-by: Grant Likely Acked-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 2 +- arch/powerpc/boot/Makefile | 18 ++++++++++-------- 2 files changed, 11 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 1c6ce3536e4c..ab5cfe8ef988 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -155,7 +155,7 @@ all: zImage CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage treeImage.% cuImage.% +BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% PHONY += $(BOOT_TARGETS) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index e3993a607584..4974d9e56ead 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -186,7 +186,7 @@ quiet_cmd_wrap = WRAP $@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries -image-$(CONFIG_PPC_PS3) += zImage-dtb.ps3 +image-$(CONFIG_PPC_PS3) += dtbImage.ps3 image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp @@ -205,7 +205,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # # Board ports in arch/powerpc/platform/40x/Kconfig -image-$(CONFIG_EP405) += zImage-dtb.ep405 +image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_WALNUT) += treeImage.walnut # Board ports in arch/powerpc/platform/44x/Kconfig @@ -220,9 +220,9 @@ image-$(CONFIG_WARP) += cuImage.warp # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads -image-$(CONFIG_PPC_EP88XC) += zImage-dtb.ep88xc +image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ - zImage-dtb.adder875-redboot + dtbImage.adder875-redboot # Board ports in arch/powerpc/platform/52xx/Kconfig image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b @@ -230,7 +230,7 @@ image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b # Board ports in arch/powerpc/platform/82xx/Kconfig image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads image-$(CONFIG_PQ2FADS) += cuImage.pq2fads -image-$(CONFIG_EP8248E) += zImage-dtb.ep8248e +image-$(CONFIG_EP8248E) += dtbImage.ep8248e # Board ports in arch/powerpc/platform/83xx/Kconfig image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds @@ -268,7 +268,8 @@ endif initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, \ - $(patsubst treeImage%, treeImage.initrd%, $(image-y))) + $(patsubst dtbImage%, dtbImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y)))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) @@ -283,10 +284,11 @@ $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(obj)/zImage.%: vmlinux $(wrapperbits) $(call if_changed,wrap,$*) -$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts +# dtbImage% - a dtbImage is a zImage with an embedded device tree blob +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) -$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts $(call if_changed,wrap,$*,$(dtstree)/$*.dts) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) -- cgit v1.2.1 From 7f172890a8f8744c4005c267ae9e228411ab173f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 29 Feb 2008 14:58:03 +1100 Subject: [POWERPC] Fix bogus test for unassigned PCI resources A bogus test for unassigned resources that came from our 32-bit PCI code ended up being "merged" by my previous patch series, breaking some 64-bit setups where devices have legal resources ending at 0xffffffff. This fixes it by completely changing the test. We now test for res->start == 0, as the generic code expects, and we also only do so on platforms that don't have the PPC_PCI_PROBE_ONLY flag set, as there are cases of pSeries and iSeries where it could be a valid value and those can't reassign devices. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci-common.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 980fe32895c0..89c83ccb85c1 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -748,7 +748,13 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev) struct resource *res = dev->resource + i; if (!res->flags) continue; - if (res->end == 0xffffffff) { + /* On platforms that have PPC_PCI_PROBE_ONLY set, we don't + * consider 0 as an unassigned BAR value. It's technically + * a valid value, but linux doesn't like it... so when we can + * re-assign things, we do so, but if we can't, we keep it + * around and hope for the best... + */ + if (res->start == 0 && !(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) { pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n", pci_name(dev), i, (unsigned long long)res->start, -- cgit v1.2.1 From 98cddbfb3218925c35697562f7d9df692bf6a436 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Wed, 12 Mar 2008 10:48:48 +1100 Subject: [POWERPC] Fix arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU When building arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU we get the following warnings: arch/powerpc/platforms/powermac/pic.c: In function 'pmacpic_find_viaint': arch/powerpc/platforms/powermac/pic.c:623: warning: label 'not_found' defined but not used This fixes it. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/pic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 40736400ef80..829b8b02527b 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -618,9 +618,9 @@ static int pmacpic_find_viaint(void) if (np == NULL) goto not_found; viaint = irq_of_parse_and_map(np, 0);; -#endif /* CONFIG_ADB_PMU */ not_found: +#endif /* CONFIG_ADB_PMU */ return viaint; } -- cgit v1.2.1 From 07dc42f632e335a03c0e780805dc9dc141f83e63 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 13 Mar 2008 07:24:31 +1100 Subject: [POWERPC] Export empty_zero_page Once again, this time with feeling.... - Ted >From c91cfaabc17f8a53807a2f31f067a732e34a1550 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 12 Mar 2008 11:50:39 -0400 Subject: Export empty_zero_page The empty_zero_page symbol is exported by most other architectures (s390, ia64, x86, um), and an upcoming ext4 patch needs it because ZERO_PAGE() references empty_zero_page, and we need it to zero out an unitialized extents in ext4 files. Signed-off-by: "Theodore Ts'o" Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ppc_ksyms.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 3e52122c5073..9c98424277a8 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -58,6 +58,7 @@ extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); extern int sys_sigreturn(struct pt_regs *regs); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); -- cgit v1.2.1 From 31bf111944e31b64a7b692f9d660f71c5ff3d419 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 12 Mar 2008 18:03:24 +1100 Subject: [POWERPC] Fix large hash table allocation on Cell blades My recent hack to allocate the hash table under 1GB on cell was poorly tested, *cough*. It turns out on blades with large amounts of memory we fail to allocate the hash table at all. This is because RTAS has been instantiated just below 768MB, and 0-x MB are used by the kernel, leaving no areas that are both large enough and also naturally-aligned. For the cell IOMMU hack the page tables must be under 2GB, so use that as the limit instead. This has been tested on real hardware and boots happily. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 32f416175db1..590f1f67c874 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -506,10 +506,10 @@ void __init htab_initialize(void) } else { /* Find storage for the HPT. Must be contiguous in * the absolute address space. On cell we want it to be - * in the first 1 Gig. + * in the first 2 Gig so we can use it for IOMMU hacks. */ if (machine_is(cell)) - limit = 0x40000000; + limit = 0x80000000; else limit = 0; -- cgit v1.2.1