From d36b4c4f3cc6caae6d4a12d9f995513e4c3acdd5 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 6 Apr 2011 00:18:48 -0500 Subject: powerpc/fsl-booke64: Add support for Debug Level exception handler Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/cputable.h | 4 ++- arch/powerpc/kernel/exceptions-64e.S | 65 ++++++++++++++++++++++++++++++++++-- arch/powerpc/kernel/setup_64.c | 8 +++++ 3 files changed, 73 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 4efbfb3f3254..c0d842cfd012 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -157,6 +157,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_476_DD2 ASM_CONST(0x0000000000010000) #define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) #define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) +#define CPU_FTR_DEBUG_LVL_EXC ASM_CONST(0x0000000000080000) #define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) #define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) #define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) @@ -385,7 +386,8 @@ extern const char *powerpc_base_platform; CPU_FTR_DBELL) #define CPU_FTRS_E5500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ - CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD) + CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_DEBUG_LVL_EXC) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 4d0abb4930a1..cf27a8fa0d29 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -253,9 +253,6 @@ exception_marker: .balign 0x1000 .globl interrupt_base_book3e interrupt_base_book3e: /* fake trap */ - /* Note: If real debug exceptions are supported by the HW, the vector - * below will have to be patched up to point to an appropriate handler - */ EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */ EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */ EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ @@ -455,6 +452,68 @@ interrupt_end_book3e: kernel_dbg_exc: b . /* NYI */ +/* Debug exception as a debug interrupt*/ + START_EXCEPTION(debug_debug); + DBG_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS) + + /* + * If there is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the DSRR1 value and clearing the debug status. + */ + + mfspr r14,SPRN_DBSR /* check single-step/branch taken */ + andis. r15,r14,DBSR_IC@h + beq+ 1f + + LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) + LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) + cmpld cr0,r10,r14 + cmpld cr1,r10,r15 + blt+ cr0,1f + bge+ cr1,1f + + /* here it looks like we got an inappropriate debug exception. */ + lis r14,DBSR_IC@h /* clear the IC event */ + rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */ + mtspr SPRN_DBSR,r14 + mtspr SPRN_DSRR1,r11 + lwz r10,PACA_EXDBG+EX_CR(r13) /* restore registers */ + ld r1,PACA_EXDBG+EX_R1(r13) + ld r14,PACA_EXDBG+EX_R14(r13) + ld r15,PACA_EXDBG+EX_R15(r13) + mtcr r10 + ld r10,PACA_EXDBG+EX_R10(r13) /* restore registers */ + ld r11,PACA_EXDBG+EX_R11(r13) + mfspr r13,SPRN_SPRG_DBG_SCRATCH + rfdi + + /* Normal debug exception */ + /* XXX We only handle coming from userspace for now since we can't + * quite save properly an interrupted kernel state yet + */ +1: andi. r14,r11,MSR_PR; /* check for userspace again */ + beq kernel_dbg_exc; /* if from kernel mode */ + + /* Now we mash up things to make it look like we are coming on a + * normal exception + */ + mfspr r15,SPRN_SPRG_DBG_SCRATCH + mtspr SPRN_SPRG_GEN_SCRATCH,r15 + mfspr r14,SPRN_DBSR + EXCEPTION_COMMON(0xd00, PACA_EXDBG, INTS_DISABLE_ALL) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + ld r14,PACA_EXDBG+EX_R14(r13) + ld r15,PACA_EXDBG+EX_R15(r13) + bl .save_nvgprs + bl .DebugException + b .ret_from_except + /* Doorbell interrupt */ MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index c2ec0a12e14f..a88bf2713d41 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -62,6 +62,7 @@ #include #include #include +#include #include "setup.h" @@ -477,6 +478,9 @@ static void __init irqstack_early_init(void) #ifdef CONFIG_PPC_BOOK3E static void __init exc_lvl_early_init(void) { + extern unsigned int interrupt_base_book3e; + extern unsigned int exc_debug_debug_book3e; + unsigned int i; for_each_possible_cpu(i) { @@ -487,6 +491,10 @@ static void __init exc_lvl_early_init(void) mcheckirq_ctx[i] = (struct thread_info *) __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); } + + if (cpu_has_feature(CPU_FTR_DEBUG_LVL_EXC)) + patch_branch(&interrupt_base_book3e + (0x040 / 4) + 1, + (unsigned long)&exc_debug_debug_book3e, 0); } #else #define exc_lvl_early_init() -- cgit v1.2.1 From 3a6e9bd7f60b29efc205485ceb11a768032c40d4 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 9 May 2011 16:26:00 -0500 Subject: powerpc/e5500: set non-base IVORs Without this, we attempt to use doorbells for IPIs, and end up branching to some bad address. Plus, even for the exceptions we don't implement, it's good to handle it and get a message out. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/reg_booke.h | 4 +++ arch/powerpc/kernel/cpu_setup_fsl_booke.S | 3 ++ arch/powerpc/kernel/exceptions-64e.S | 47 +++++++++++++++++++++++++++++++ 3 files changed, 54 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 817bd1ac1752..0f0ad9fa01c1 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -83,6 +83,10 @@ #define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ #define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ #define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ +#define SPRN_IVOR38 0x1B0 /* Interrupt Vector Offset Register 38 */ +#define SPRN_IVOR39 0x1B1 /* Interrupt Vector Offset Register 39 */ +#define SPRN_IVOR40 0x1B2 /* Interrupt Vector Offset Register 40 */ +#define SPRN_IVOR41 0x1B3 /* Interrupt Vector Offset Register 41 */ #define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ #define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ #define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index 913611105c1f..8053db02b85e 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -88,6 +88,9 @@ _GLOBAL(__setup_cpu_e5500) bl __e500_dcache_setup #ifdef CONFIG_PPC_BOOK3E_64 bl .__setup_base_ivors + bl .setup_perfmon_ivor + bl .setup_doorbell_ivors + bl .setup_ehv_ivors #else bl __setup_e500mc_ivors #endif diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index cf27a8fa0d29..d24d4400cc79 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -269,8 +269,13 @@ interrupt_base_book3e: /* fake trap */ EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ EXCEPTION_STUB(0x1c0, data_tlb_miss) EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + EXCEPTION_STUB(0x260, perfmon) EXCEPTION_STUB(0x280, doorbell) EXCEPTION_STUB(0x2a0, doorbell_crit) + EXCEPTION_STUB(0x2c0, guest_doorbell) + EXCEPTION_STUB(0x2e0, guest_doorbell_crit) + EXCEPTION_STUB(0x300, hypercall) + EXCEPTION_STUB(0x320, ehpriv) .globl interrupt_end_book3e interrupt_end_book3e: @@ -514,6 +519,8 @@ kernel_dbg_exc: bl .DebugException b .ret_from_except + MASKABLE_EXCEPTION(0x260, perfmon, .performance_monitor_exception, ACK_NONE) + /* Doorbell interrupt */ MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE) @@ -528,6 +535,11 @@ kernel_dbg_exc: // b ret_from_crit_except b . + MASKABLE_EXCEPTION(0x2c0, guest_doorbell, .unknown_exception, ACK_NONE) + MASKABLE_EXCEPTION(0x2e0, guest_doorbell_crit, .unknown_exception, ACK_NONE) + MASKABLE_EXCEPTION(0x310, hypercall, .unknown_exception, ACK_NONE) + MASKABLE_EXCEPTION(0x320, ehpriv, .unknown_exception, ACK_NONE) + /* * An interrupt came in while soft-disabled; clear EE in SRR1, @@ -647,7 +659,12 @@ fast_exception_return: BAD_STACK_TRAMPOLINE(0x000) BAD_STACK_TRAMPOLINE(0x100) BAD_STACK_TRAMPOLINE(0x200) +BAD_STACK_TRAMPOLINE(0x260) +BAD_STACK_TRAMPOLINE(0x2c0) +BAD_STACK_TRAMPOLINE(0x2e0) BAD_STACK_TRAMPOLINE(0x300) +BAD_STACK_TRAMPOLINE(0x310) +BAD_STACK_TRAMPOLINE(0x320) BAD_STACK_TRAMPOLINE(0x400) BAD_STACK_TRAMPOLINE(0x500) BAD_STACK_TRAMPOLINE(0x600) @@ -1183,3 +1200,33 @@ _GLOBAL(__setup_base_ivors) sync blr + +_GLOBAL(setup_perfmon_ivor) + SET_IVOR(35, 0x260) /* Performance Monitor */ + blr + +_GLOBAL(setup_doorbell_ivors) + SET_IVOR(36, 0x280) /* Processor Doorbell */ + SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */ + + /* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beqlr + + SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */ + SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */ + blr + +_GLOBAL(setup_ehv_ivors) + /* + * We may be running as a guest and lack E.HV even on a chip + * that normally has it. + */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beqlr + + SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */ + SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */ + blr -- cgit v1.2.1 From e0be2c21649107282930837f0805c71dfe29e2cc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 4 May 2011 16:29:31 +0200 Subject: powerpc/mpc8610_hpcd: Do not use "/" in interrupt names It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when trying to add an entry for the interrupt handler to sysfs. Signed-off-by: Geert Uytterhoeven Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 018cc67be426..efadd3be8e6e 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -66,7 +66,7 @@ static void __init mpc8610_suspend_init(void) return; } - ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL); + ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9:wakeup", NULL); if (ret) { pr_err("%s: can't request pixis event IRQ: %d\n", __func__, ret); -- cgit v1.2.1 From f46dad270b7f425d7d4ec08676f2513732d11c2b Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 9 May 2011 14:29:40 -0500 Subject: powerpc/86xx: don't pretend that we support 8-bit pixels on the MPC8610 HPCD If the video mode is set to 16-, 24-, or 32-bit pixels, then the pixel data contains actual levels of red, blue, and green. However, if the video mode is set to 8-bit pixels, then the 8-bit value represents an index into color table. This is called "palette mode" on the Freescale DIU video controller. The DIU driver does not currently support palette mode, but the MPC8610 HPCD board file returned a non-zero (although incorrect) pixel format value for 8-bit mode. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 97 ++++++++++++++++++++---------- 1 file changed, 64 insertions(+), 33 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index efadd3be8e6e..a896511690c2 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -105,45 +105,77 @@ machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) -static u32 get_busfreq(void) -{ - struct device_node *node; - - u32 fs_busfreq = 0; - node = of_find_node_by_type(NULL, "cpu"); - if (node) { - unsigned int size; - const unsigned int *prop = - of_get_property(node, "bus-frequency", &size); - if (prop) - fs_busfreq = *prop; - of_node_put(node); - }; - return fs_busfreq; -} +/* + * DIU Area Descriptor + * + * The MPC8610 reference manual shows the bits of the AD register in + * little-endian order, which causes the BLUE_C field to be split into two + * parts. To simplify the definition of the MAKE_AD() macro, we define the + * fields in big-endian order and byte-swap the result. + * + * So even though the registers don't look like they're in the + * same bit positions as they are on the P1022, the same value is written to + * the AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_MASK 0x0E000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_MASK 0x01800000 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_MASK 0x00600000 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_MASK 0x00180000 +#define AD_RED_C_SHIFT 19 +#define AD_PALETTE 0x00040000 +#define AD_PIXEL_S_MASK 0x00030000 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_MASK 0x0000F000 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_MASK 0x00000F00 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_MASK 0x000000F0 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_MASK 0x0000000F +#define AD_COMP_0_SHIFT 0 + +#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \ + cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \ + (blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \ + (red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \ + (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ + (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel, int monitor_port) { static const unsigned long pixelformat[][3] = { - {0x88882317, 0x88083218, 0x65052119}, - {0x88883316, 0x88082219, 0x65053118}, + { + MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8), + MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0), + MAKE_AD(4, 0, 2, 1, 1, 5, 6, 5, 0) + }, + { + MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8), + MAKE_AD(4, 0, 2, 1, 2, 8, 8, 8, 0), + MAKE_AD(4, 2, 0, 1, 1, 5, 6, 5, 0) + }, }; - unsigned int pix_fmt, arch_monitor; + unsigned int arch_monitor; + /* The DVI port is mis-wired on revision 1 of this board. */ arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1; - /* DVI port for board version 0x01 */ - - if (bits_per_pixel == 32) - pix_fmt = pixelformat[arch_monitor][0]; - else if (bits_per_pixel == 24) - pix_fmt = pixelformat[arch_monitor][1]; - else if (bits_per_pixel == 16) - pix_fmt = pixelformat[arch_monitor][2]; - else - pix_fmt = pixelformat[1][0]; - - return pix_fmt; + + switch (bits_per_pixel) { + case 32: + return pixelformat[arch_monitor][0]; + case 24: + return pixelformat[arch_monitor][1]; + case 16: + return pixelformat[arch_monitor][2]; + default: + pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); + return 0; + } } void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base) @@ -190,8 +222,7 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) } /* Pixel Clock configuration */ - pr_debug("DIU: Bus Frequency = %d\n", get_busfreq()); - speed_ccb = get_busfreq(); + speed_ccb = fsl_get_sys_freq(); /* Calculate the pixel clock with the smallest error */ /* calculate the following in steps to avoid overflow */ -- cgit v1.2.1 From c281739f5988af1f86ef06e92485aec25b8c8c4f Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 24 Mar 2011 16:43:52 -0500 Subject: powerpc/p1022ds: fix broken mpic timer node There is no hardware interrupt 0xf7. But now we can express the timer interrupt using 4-cell interrupts. This requires converting all of the other interrupt specifiers in the tree as well. Also add the second timer group, and fix the reg property to only describe the timer registers. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1022ds.dts | 106 +++++++++++++++++++++----------------- 1 file changed, 59 insertions(+), 47 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 59ef405c1c91..4f685a779f4c 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -52,7 +52,7 @@ #size-cells = <1>; compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; + interrupts = <19 2 0 0>; ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 0x1 0x0 0xf 0xe0000000 0x08000000 @@ -157,7 +157,7 @@ * IRQ8 is generated if the "EVENT" switch is pressed * and PX_CTL[EVESEL] is set to 00. */ - interrupts = <8 8>; + interrupts = <8 8 0 0>; }; }; @@ -178,13 +178,13 @@ ecm@1000 { compatible = "fsl,p1022-ecm", "fsl,ecm"; reg = <0x1000 0x1000>; - interrupts = <16 2>; + interrupts = <16 2 0 0>; }; memory-controller@2000 { compatible = "fsl,p1022-memory-controller"; reg = <0x2000 0x1000>; - interrupts = <16 2>; + interrupts = <16 2 0 0>; }; i2c@3000 { @@ -193,7 +193,7 @@ cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <43 2>; + interrupts = <43 2 0 0>; dfsrr; }; @@ -203,7 +203,7 @@ cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <43 2>; + interrupts = <43 2 0 0>; dfsrr; wm8776:codec@1a { @@ -220,7 +220,7 @@ compatible = "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <42 2>; + interrupts = <42 2 0 0>; }; serial1: serial@4600 { @@ -229,7 +229,7 @@ compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <42 2>; + interrupts = <42 2 0 0>; }; spi@7000 { @@ -238,7 +238,7 @@ #size-cells = <0>; compatible = "fsl,espi"; reg = <0x7000 0x1000>; - interrupts = <59 0x2>; + interrupts = <59 0x2 0 0>; espi,num-ss-bits = <4>; mode = "cpu"; @@ -275,7 +275,7 @@ compatible = "fsl,mpc8610-ssi"; cell-index = <0>; reg = <0x15000 0x100>; - interrupts = <75 2>; + interrupts = <75 2 0 0>; fsl,mode = "i2s-slave"; codec-handle = <&wm8776>; fsl,playback-dma = <&dma00>; @@ -294,25 +294,25 @@ compatible = "fsl,ssi-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupts = <76 2>; + interrupts = <76 2 0 0>; }; dma01: dma-channel@80 { compatible = "fsl,ssi-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupts = <77 2>; + interrupts = <77 2 0 0>; }; dma-channel@100 { compatible = "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupts = <78 2>; + interrupts = <78 2 0 0>; }; dma-channel@180 { compatible = "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupts = <79 2>; + interrupts = <79 2 0 0>; }; }; @@ -320,7 +320,7 @@ #gpio-cells = <2>; compatible = "fsl,mpc8572-gpio"; reg = <0xf000 0x100>; - interrupts = <47 0x2>; + interrupts = <47 0x2 0 0>; gpio-controller; }; @@ -329,7 +329,7 @@ reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K - interrupts = <16 2>; + interrupts = <16 2 0 0>; }; dma@21300 { @@ -343,25 +343,25 @@ compatible = "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupts = <20 2>; + interrupts = <20 2 0 0>; }; dma-channel@80 { compatible = "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupts = <21 2>; + interrupts = <21 2 0 0>; }; dma-channel@100 { compatible = "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupts = <22 2>; + interrupts = <22 2 0 0>; }; dma-channel@180 { compatible = "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupts = <23 2>; + interrupts = <23 2 0 0>; }; }; @@ -370,7 +370,7 @@ #size-cells = <0>; compatible = "fsl-usb2-dr"; reg = <0x22000 0x1000>; - interrupts = <28 0x2>; + interrupts = <28 0x2 0 0>; phy_type = "ulpi"; }; @@ -381,11 +381,11 @@ reg = <0x24000 0x1000 0xb0030 0x4>; phy0: ethernet-phy@0 { - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x1>; }; phy1: ethernet-phy@1 { - interrupts = <9 1>; + interrupts = <9 1 0 0>; reg = <0x2>; }; }; @@ -416,13 +416,13 @@ #address-cells = <1>; #size-cells = <1>; reg = <0xB0000 0x1000>; - interrupts = <29 2 30 2 34 2>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; }; queue-group@1{ #address-cells = <1>; #size-cells = <1>; reg = <0xB4000 0x1000>; - interrupts = <17 2 18 2 24 2>; + interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; }; }; @@ -443,20 +443,20 @@ #address-cells = <1>; #size-cells = <1>; reg = <0xB1000 0x1000>; - interrupts = <35 2 36 2 40 2>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; }; queue-group@1{ #address-cells = <1>; #size-cells = <1>; reg = <0xB5000 0x1000>; - interrupts = <51 2 52 2 67 2>; + interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; }; }; sdhci@2e000 { compatible = "fsl,p1022-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; + interrupts = <72 0x2 0 0>; fsl,sdhci-auto-cmd12; /* Filled in by U-Boot */ clock-frequency = <0>; @@ -467,7 +467,7 @@ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; + interrupts = <45 2 0 0 58 2 0 0>; fsl,num-channels = <4>; fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x97c>; @@ -478,14 +478,14 @@ compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; reg = <0x18000 0x1000>; cell-index = <1>; - interrupts = <74 0x2>; + interrupts = <74 0x2 0 0>; }; sata@19000 { compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; reg = <0x19000 0x1000>; cell-index = <2>; - interrupts = <41 0x2>; + interrupts = <41 0x2 0 0>; }; power@e0070{ @@ -496,21 +496,33 @@ display@10000 { compatible = "fsl,diu", "fsl,p1022-diu"; reg = <0x10000 1000>; - interrupts = <64 2>; + interrupts = <64 2 0 0>; }; timer@41100 { compatible = "fsl,mpic-global-timer"; - reg = <0x41100 0x204>; - interrupts = <0xf7 0x2>; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; + }; + + timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; }; mpic: pic@40000 { interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic"; device_type = "open-pic"; }; @@ -519,14 +531,14 @@ reg = <0x41600 0x80>; msi-available-ranges = <0 0x100>; interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; }; global-utilities@e0000 { //global utilities block @@ -547,7 +559,7 @@ ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; clock-frequency = <33333333>; - interrupts = <16 2>; + interrupts = <16 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ @@ -582,7 +594,7 @@ ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; clock-frequency = <33333333>; - interrupts = <16 2>; + interrupts = <16 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ @@ -618,7 +630,7 @@ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; clock-frequency = <33333333>; - interrupts = <16 2>; + interrupts = <16 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ -- cgit v1.2.1 From 22d168ce60272ca112e86e58c5ebde82f20f9c83 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 24 Mar 2011 16:43:54 -0500 Subject: powerpc/mpic: parse 4-cell intspec types other than zero Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mpic.h | 2 ++ arch/powerpc/sysdev/mpic.c | 37 ++++++++++++++++++++++++++++++++++++- 2 files changed, 38 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index 7005ee0b074d..25a0cb3a79f3 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -371,6 +371,8 @@ struct mpic * NOTE: This flag trumps MPIC_WANTS_RESET. */ #define MPIC_NO_RESET 0x00004000 +/* Freescale MPIC (compatible includes "fsl,mpic") */ +#define MPIC_FSL 0x00008000 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 824a94fc413b..0a3c1c20115c 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -6,6 +6,7 @@ * with various broken implementations of this HW. * * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive @@ -1023,6 +1024,7 @@ static int mpic_host_xlate(struct irq_host *h, struct device_node *ct, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { + struct mpic *mpic = h->host_data; static unsigned char map_mpic_senses[4] = { IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW, @@ -1031,7 +1033,38 @@ static int mpic_host_xlate(struct irq_host *h, struct device_node *ct, }; *out_hwirq = intspec[0]; - if (intsize > 1) { + if (intsize >= 4 && (mpic->flags & MPIC_FSL)) { + /* + * Freescale MPIC with extended intspec: + * First two cells are as usual. Third specifies + * an "interrupt type". Fourth is type-specific data. + * + * See Documentation/devicetree/bindings/powerpc/fsl/mpic.txt + */ + switch (intspec[2]) { + case 0: + case 1: /* no EISR/EIMR support for now, treat as shared IRQ */ + break; + case 2: + if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs)) + return -EINVAL; + + *out_hwirq = mpic->ipi_vecs[intspec[0]]; + break; + case 3: + if (intspec[0] >= ARRAY_SIZE(mpic->timer_vecs)) + return -EINVAL; + + *out_hwirq = mpic->timer_vecs[intspec[0]]; + break; + default: + pr_debug("%s: unknown irq type %u\n", + __func__, intspec[2]); + return -EINVAL; + } + + *out_flags = map_mpic_senses[intspec[1] & 3]; + } else if (intsize > 1) { u32 mask = 0x3; /* Apple invented a new race of encoding on machines with @@ -1130,6 +1163,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Check for "big-endian" in device-tree */ if (node && of_get_property(node, "big-endian", NULL) != NULL) mpic->flags |= MPIC_BIG_ENDIAN; + if (node && of_device_is_compatible(node, "fsl,mpic")) + mpic->flags |= MPIC_FSL; /* Look for protected sources */ if (node) { -- cgit v1.2.1 From ea94187face757e723aa461a60698ca43c09fbb9 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 24 Mar 2011 16:43:55 -0500 Subject: powerpc/mpic: add the mpic global timer support Add support for MPIC timers as requestable interrupt sources. Based on http://patchwork.ozlabs.org/patch/20941/ by Dave Liu. Signed-off-by: Dave Liu Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mpic.h | 3 +- arch/powerpc/sysdev/mpic.c | 92 ++++++++++++++++++++++++++++++++++++++--- 2 files changed, 88 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index 25a0cb3a79f3..664bee6622e7 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -263,6 +263,7 @@ struct mpic #ifdef CONFIG_SMP struct irq_chip hc_ipi; #endif + struct irq_chip hc_tm; const char *name; /* Flags */ unsigned int flags; @@ -281,7 +282,7 @@ struct mpic /* vector numbers used for internal sources (ipi/timers) */ unsigned int ipi_vecs[4]; - unsigned int timer_vecs[4]; + unsigned int timer_vecs[8]; /* Spurious vector to program into unused sources */ unsigned int spurious_vec; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0a3c1c20115c..0e47bce5f696 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -219,6 +219,28 @@ static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 valu _mpic_write(mpic->reg_type, &mpic->gregs, offset, value); } +static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm) +{ + unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) + + ((tm & 3) * MPIC_INFO(TIMER_STRIDE)); + + if (tm >= 4) + offset += 0x1000 / 4; + + return _mpic_read(mpic->reg_type, &mpic->tmregs, offset); +} + +static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value) +{ + unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) + + ((tm & 3) * MPIC_INFO(TIMER_STRIDE)); + + if (tm >= 4) + offset += 0x1000 / 4; + + _mpic_write(mpic->reg_type, &mpic->tmregs, offset, value); +} + static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg) { unsigned int cpu = mpic_processor_id(mpic); @@ -269,6 +291,8 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, #define mpic_write(b,r,v) _mpic_write(mpic->reg_type,&(b),(r),(v)) #define mpic_ipi_read(i) _mpic_ipi_read(mpic,(i)) #define mpic_ipi_write(i,v) _mpic_ipi_write(mpic,(i),(v)) +#define mpic_tm_read(i) _mpic_tm_read(mpic,(i)) +#define mpic_tm_write(i,v) _mpic_tm_write(mpic,(i),(v)) #define mpic_cpu_read(i) _mpic_cpu_read(mpic,(i)) #define mpic_cpu_write(i,v) _mpic_cpu_write(mpic,(i),(v)) #define mpic_irq_read(s,r) _mpic_irq_read(mpic,(s),(r)) @@ -625,6 +649,13 @@ static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq) return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]); } +/* Determine if the linux irq is a timer */ +static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq) +{ + unsigned int src = virq_to_hw(irq); + + return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]); +} /* Convert a cpu mask from logical to physical cpu numbers. */ static inline u32 mpic_physmask(u32 cpumask) @@ -811,6 +842,25 @@ static void mpic_end_ipi(struct irq_data *d) #endif /* CONFIG_SMP */ +static void mpic_unmask_tm(struct irq_data *d) +{ + struct mpic *mpic = mpic_from_irq_data(d); + unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0]; + + DBG("%s: enable_tm: %d (tm %d)\n", mpic->name, irq, src); + mpic_tm_write(src, mpic_tm_read(src) & ~MPIC_VECPRI_MASK); + mpic_tm_read(src); +} + +static void mpic_mask_tm(struct irq_data *d) +{ + struct mpic *mpic = mpic_from_irq_data(d); + unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0]; + + mpic_tm_write(src, mpic_tm_read(src) | MPIC_VECPRI_MASK); + mpic_tm_read(src); +} + int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool force) { @@ -941,6 +991,12 @@ static struct irq_chip mpic_ipi_chip = { }; #endif /* CONFIG_SMP */ +static struct irq_chip mpic_tm_chip = { + .irq_mask = mpic_mask_tm, + .irq_unmask = mpic_unmask_tm, + .irq_eoi = mpic_end_irq, +}; + #ifdef CONFIG_MPIC_U3_HT_IRQS static struct irq_chip mpic_irq_ht_chip = { .irq_startup = mpic_startup_ht_irq, @@ -984,6 +1040,16 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, } #endif /* CONFIG_SMP */ + if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) { + WARN_ON(!(mpic->flags & MPIC_PRIMARY)); + + DBG("mpic: mapping as timer\n"); + irq_set_chip_data(virq, mpic); + irq_set_chip_and_handler(virq, &mpic->hc_tm, + handle_fasteoi_irq); + return 0; + } + if (hw >= mpic->irq_count) return -EINVAL; @@ -1140,6 +1206,9 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->hc_ipi.name = name; #endif /* CONFIG_SMP */ + mpic->hc_tm = mpic_tm_chip; + mpic->hc_tm.name = name; + mpic->flags = flags; mpic->isu_size = isu_size; mpic->irq_count = irq_count; @@ -1150,10 +1219,14 @@ struct mpic * __init mpic_alloc(struct device_node *node, else intvec_top = 255; - mpic->timer_vecs[0] = intvec_top - 8; - mpic->timer_vecs[1] = intvec_top - 7; - mpic->timer_vecs[2] = intvec_top - 6; - mpic->timer_vecs[3] = intvec_top - 5; + mpic->timer_vecs[0] = intvec_top - 12; + mpic->timer_vecs[1] = intvec_top - 11; + mpic->timer_vecs[2] = intvec_top - 10; + mpic->timer_vecs[3] = intvec_top - 9; + mpic->timer_vecs[4] = intvec_top - 8; + mpic->timer_vecs[5] = intvec_top - 7; + mpic->timer_vecs[6] = intvec_top - 6; + mpic->timer_vecs[7] = intvec_top - 5; mpic->ipi_vecs[0] = intvec_top - 4; mpic->ipi_vecs[1] = intvec_top - 3; mpic->ipi_vecs[2] = intvec_top - 2; @@ -1356,15 +1429,17 @@ void __init mpic_init(struct mpic *mpic) /* Set current processor priority to max */ mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); - /* Initialize timers: just disable them all */ + /* Initialize timers to our reserved vectors and mask them for now */ for (i = 0; i < 4; i++) { mpic_write(mpic->tmregs, i * MPIC_INFO(TIMER_STRIDE) + - MPIC_INFO(TIMER_DESTINATION), 0); + MPIC_INFO(TIMER_DESTINATION), + 1 << hard_smp_processor_id()); mpic_write(mpic->tmregs, i * MPIC_INFO(TIMER_STRIDE) + MPIC_INFO(TIMER_VECTOR_PRI), MPIC_VECPRI_MASK | + (9 << MPIC_VECPRI_PRIORITY_SHIFT) | (mpic->timer_vecs[0] + i)); } @@ -1473,6 +1548,11 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) ~MPIC_VECPRI_PRIORITY_MASK; mpic_ipi_write(src - mpic->ipi_vecs[0], reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); + } else if (mpic_is_tm(mpic, irq)) { + reg = mpic_tm_read(src - mpic->timer_vecs[0]) & + ~MPIC_VECPRI_PRIORITY_MASK; + mpic_tm_write(src - mpic->timer_vecs[0], + reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } else { reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & ~MPIC_VECPRI_PRIORITY_MASK; -- cgit v1.2.1 From 5e8393ab311d2c34f2965be40ebec99c772284ab Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 10 May 2011 13:01:47 -0500 Subject: powerpc/e5500: add networking to defconfig Even though support for the p5020's on-chip ethernet is not yet upstream, it is not appropriate to disable all networking support (including loopback, unix domain sockets, external ethernet devices, etc) in the defconfig. The networking settings are taken from mpc85xx_smp_defconfig, minus the drivers for ethernet devices not found on any current e5500 chip. The other changes are the result of running "make savedefconfig". Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/configs/e55xx_smp_defconfig | 38 ++++++++++++++++++++++++-------- 1 file changed, 29 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig index 9fa1613e5e2b..f4c5780ea747 100644 --- a/arch/powerpc/configs/e55xx_smp_defconfig +++ b/arch/powerpc/configs/e55xx_smp_defconfig @@ -6,10 +6,10 @@ CONFIG_NR_CPUS=2 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y +CONFIG_SPARSE_IRQ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y @@ -25,8 +25,32 @@ CONFIG_P5020_DS=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m -CONFIG_SPARSE_IRQ=y # CONFIG_PCI is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +CONFIG_INET_ESP=y +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_IPV6=y +CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y @@ -34,6 +58,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_NET_ETHERNET=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -64,7 +91,6 @@ CONFIG_NLS=y CONFIG_NLS_UTF8=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m -CONFIG_LIBCRC32C=m CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y @@ -74,12 +100,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_VIRQ_DEBUG=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_TALITOS=y -- cgit v1.2.1 From b637cf7bf82d0692609821cd84e3a345e56cd96c Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 10 May 2011 13:02:06 -0500 Subject: powerpc/fsl: enable verbose bug output This debug option has no overhead other than a slight increase in kernel size, and makes bug reports more useful. While some end users may prefer to save the space, as a default on a kernel config aimed primarily at development on reference boards, it should be enabled. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 1 - arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 1 - arch/powerpc/configs/85xx/mpc8540_ads_defconfig | 1 - arch/powerpc/configs/85xx/mpc8560_ads_defconfig | 1 - arch/powerpc/configs/85xx/mpc85xx_cds_defconfig | 1 - arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 1 - arch/powerpc/configs/e55xx_smp_defconfig | 1 - arch/powerpc/configs/mpc85xx_defconfig | 1 - arch/powerpc/configs/mpc85xx_smp_defconfig | 1 - arch/powerpc/configs/mpc86xx_defconfig | 1 - 10 files changed, 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index c683bce4c26e..126ef1b08a01 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -104,7 +104,6 @@ CONFIG_ROOT_NFS=y CONFIG_PARTITION_ADVANCED=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index a721cd3d793f..abcf00ad939e 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -101,7 +101,6 @@ CONFIG_ROOT_NFS=y CONFIG_PARTITION_ADVANCED=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 55e0725500dc..11662c217ac0 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -58,7 +58,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index d724095530a6..ebe9b30b0721 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -59,7 +59,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 4b44beaa21ae..eb25229b387a 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -63,7 +63,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index b614508d6fd2..f51c7ebc181e 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -168,7 +168,6 @@ CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig index f4c5780ea747..d32283555b53 100644 --- a/arch/powerpc/configs/e55xx_smp_defconfig +++ b/arch/powerpc/configs/e55xx_smp_defconfig @@ -95,7 +95,6 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index c06a86c33098..96b89df7752a 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -204,7 +204,6 @@ CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 942ced90557c..de65841aa04e 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -206,7 +206,6 @@ CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 038a308cbfc4..a1cc8179e9fd 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -171,7 +171,6 @@ CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -- cgit v1.2.1 From b6e4df4dab86e3cd2475748c49aac16dadb8330e Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Thu, 7 Apr 2011 14:40:55 +0530 Subject: powerpc/85xx: P1020 DTS : re-organize dts files Creates P1020si.dtsi, containing information for the P1020 SoC. Modifies dts files for P1020 based systems to use dtsi file Signed-off-by: Prabhakar Kushwaha Acked-by: Grant Likely Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1020rdb.dts | 316 +------------------------------ arch/powerpc/boot/dts/p1020si.dtsi | 377 +++++++++++++++++++++++++++++++++++++ 2 files changed, 380 insertions(+), 313 deletions(-) create mode 100644 arch/powerpc/boot/dts/p1020si.dtsi (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts index e0668f877794..7ed4793489ce 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dts +++ b/arch/powerpc/boot/dts/p1020rdb.dts @@ -9,12 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "p1020si.dtsi" + / { - model = "fsl,P1020"; + model = "fsl,P1020RDB"; compatible = "fsl,P1020RDB"; - #address-cells = <2>; - #size-cells = <2>; aliases { serial0 = &serial0; @@ -26,34 +25,11 @@ pci1 = &pci1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; - memory { device_type = "memory"; }; localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 @@ -165,88 +141,14 @@ }; soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - mode = "cpu"; fsl_m25p80@0 { #address-cells = <1>; @@ -294,66 +196,7 @@ }; }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; @@ -369,10 +212,6 @@ }; mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x25000 0x1000 0xb1030 0x4>; tbi0: tbi-phy@11 { reg = <0x11>; @@ -381,97 +220,25 @@ }; enet0: ethernet@b0000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; fixed-link = <1 1 1000 0 0>; phy-connection-type = "rgmii-id"; - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb0000 0x1000>; - interrupts = <29 2 30 2 34 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb4000 0x1000>; - interrupts = <17 2 18 2 24 2>; - }; }; enet1: ethernet@b1000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; phy-handle = <&phy0>; tbi-handle = <&tbi0>; phy-connection-type = "sgmii"; - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb1000 0x1000>; - interrupts = <35 2 36 2 40 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb5000 0x1000>; - interrupts = <51 2 52 2 67 2>; - }; }; enet2: ethernet@b2000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb2000 0x1000>; - interrupts = <31 2 32 2 33 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb6000 0x1000>; - interrupts = <25 2 26 2 27 2>; - }; }; usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; phy_type = "ulpi"; }; @@ -481,82 +248,15 @@ it enables USB2. OTOH, U-Boot does create a new node when there isn't any. So, just comment it out. usb@23000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <46 0x2>; phy_type = "ulpi"; }; */ - sdhci@2e000 { - compatible = "fsl,p1020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; }; pci0: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -573,18 +273,8 @@ }; pci1: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi new file mode 100644 index 000000000000..f6f110096c5f --- /dev/null +++ b/arch/powerpc/boot/dts/p1020si.dtsi @@ -0,0 +1,377 @@ +/* + * P1020si Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1020"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1020-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p1020-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; + + }; + + mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; + + }; + + enet0: ethernet@b0000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + + queue-group@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000 0x1000>; + interrupts = <29 2 30 2 34 2>; + }; + + queue-group@1 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb4000 0x1000>; + interrupts = <17 2 18 2 24 2>; + }; + }; + + enet1: ethernet@b1000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + + queue-group@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb1000 0x1000>; + interrupts = <35 2 36 2 40 2>; + }; + + queue-group@1 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb5000 0x1000>; + interrupts = <51 2 52 2 67 2>; + }; + }; + + enet2: ethernet@b2000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + + queue-group@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb2000 0x1000>; + interrupts = <31 2 32 2 33 2>; + }; + + queue-group@1 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb6000 0x1000>; + interrupts = <25 2 26 2 27 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <46 0x2>; + phy_type = "ulpi"; + }; + */ + + sdhci@2e000 { + compatible = "fsl,p1020-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1020-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; +}; -- cgit v1.2.1 From eb2c5d9965adec2d7cd1946fa39f2dece073dab7 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Fri, 8 Apr 2011 17:57:05 +0530 Subject: powerpc/85xx: P2020 DTS: re-organize dts files Creates P2020si.dtsi, containing information for P2020 SoC. Modifies dts files for P2020 based systems to use dtsi file. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p2020ds.dts | 374 ++----------------------- arch/powerpc/boot/dts/p2020rdb.dts | 362 ++---------------------- arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 237 +++------------- arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 142 ++++++---- arch/powerpc/boot/dts/p2020si.dtsi | 382 ++++++++++++++++++++++++++ 5 files changed, 564 insertions(+), 933 deletions(-) create mode 100644 arch/powerpc/boot/dts/p2020si.dtsi (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts index 11019142813c..2bcf3683d223 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -1,7 +1,7 @@ /* * P2020 DS Device Tree Source * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009-2011 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,12 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "p2020si.dtsi" + / { - model = "fsl,P2020"; + model = "fsl,P2020DS"; compatible = "fsl,P2020DS"; - #address-cells = <2>; - #size-cells = <2>; aliases { ethernet0 = &enet0; @@ -27,35 +26,13 @@ pci2 = &pci2; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P2020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P2020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; compatible = "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 0x1 0x0 0x0 0xe0000000 0x08000000 0x2 0x0 0x0 0xffa00000 0x00040000 @@ -158,352 +135,77 @@ }; soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p2020-immr", "simple-bus"; - ranges = <0x0 0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p2020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p2020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - spi@7000 { - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; + usb@22000 { + phy_type = "ulpi"; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; + mdio@24520 { + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <76 2>; + interrupts = <3 1>; + reg = <0x0>; }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; + phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <77 2>; + interrupts = <3 1>; + reg = <0x1>; }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; + phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <78 2>; + interrupts = <3 1>; + reg = <0x2>; }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; - }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; }; - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512k - interrupt-parent = <&mpic>; - interrupts = <16 2>; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - phy_type = "ulpi"; }; enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x2>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - sdhci@2e000 { - compatible = "fsl,p2020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; }; - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; msi@41600 { compatible = "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; }; pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe08000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ @@ -528,18 +230,8 @@ }; pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < @@ -667,18 +359,8 @@ }; pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index e2d48fd4416e..60a0a8c725d6 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -9,12 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "p2020si.dtsi" + / { - model = "fsl,P2020"; + model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB"; - #address-cells = <2>; - #size-cells = <2>; aliases { ethernet0 = &enet0; @@ -26,34 +25,11 @@ pci1 = &pci1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P2020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P2020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; - memory { device_type = "memory"; }; localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; /* NOR and NAND Flashes */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 @@ -165,90 +141,16 @@ }; soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p2020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p2020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p2020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; + spi@7000 { - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - mode = "cpu"; - - fsl_m25p80@0 { + fsl_m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,espi-flash"; @@ -294,254 +196,60 @@ }; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; + usb@22000 { + phy_type = "ulpi"; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; + mdio@24520 { + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; + interrupts = <3 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <3 1>; + reg = <0x1>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - phy_type = "ulpi"; + mdio@26520 { + status = "disabled"; }; enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; fixed-link = <1 1 1000 0 0>; phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "sgmii"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; - sdhci@2e000 { - compatible = "fsl,p2020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p2020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + }; - global-utilities@e0000 { //global utilities block - compatible = "fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; + pci0: pcie@ffe08000 { + status = "disabled"; }; - pci0: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; + pci1: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - pcie@0 { + pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; @@ -556,19 +264,9 @@ }; }; - pci1: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; + pci2: pcie@ffe0a000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts index b69c3a5dc858..72c912fd3dd9 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts @@ -14,12 +14,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "p2020si.dtsi" + / { - model = "fsl,P2020"; + model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - #address-cells = <2>; - #size-cells = <2>; aliases { ethernet1 = &enet1; @@ -29,91 +28,33 @@ }; cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P2020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; + PowerPC,P2020@1 { + status = "disabled"; }; + }; memory { device_type = "memory"; }; - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p2020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p2020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p2020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; + localbus@ffe05000 { + status = "disabled"; + }; + soc@ffe00000 { i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; + serial1: serial@4600 { + status = "disabled"; }; spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - mode = "cpu"; fsl_m25p80@0 { #address-cells = <1>; @@ -161,76 +102,15 @@ }; }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; + dma@c300 { + status = "disabled"; }; usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; phy_type = "ulpi"; }; mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; @@ -245,29 +125,21 @@ }; mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - tbi0: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; + mdio@26520 { + status = "disabled"; + }; + + enet0: ethernet@24000 { + status = "disabled"; + }; + enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "sgmii"; @@ -275,49 +147,12 @@ }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; - sdhci@2e000 { - compatible = "fsl,p2020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; protected-sources = < 42 76 77 78 79 /* serial1 , dma2 */ 29 30 34 26 /* enet0, pci1 */ @@ -326,26 +161,20 @@ >; }; - global-utilities@e0000 { - compatible = "fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; + msi@41600 { + status = "disabled"; }; + + }; - pci0: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; + pci0: pcie@ffe08000 { + status = "disabled"; + }; + + pci1: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -360,4 +189,8 @@ 0x0 0x100000>; }; }; + + pci2: pcie@ffe0a000 { + status = "disabled"; + }; }; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts index 7a31d46c01b0..eb572ccecb3d 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts @@ -15,27 +15,21 @@ * option) any later version. */ -/dts-v1/; +/include/ "p2020si.dtsi" + / { - model = "fsl,P2020"; + model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - #address-cells = <2>; - #size-cells = <2>; aliases { ethernet0 = &enet0; - serial0 = &serial0; + serial0 = &serial1; pci1 = &pci1; }; cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P2020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; + PowerPC,P2020@0 { + status = "disabled"; }; }; @@ -43,20 +37,37 @@ device_type = "memory"; }; + localbus@ffe05000 { + status = "disabled"; + }; + soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p2020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - serial0: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; }; dma@c300 { @@ -96,6 +107,10 @@ }; }; + gpio: gpio-controller@f000 { + status = "disabled"; + }; + L2: l2-cache-controller@20000 { compatible = "fsl,p2020-l2-cache-controller"; reg = <0x20000 0x1000>; @@ -104,31 +119,49 @@ interrupt-parent = <&mpic>; }; + dma@21300 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + mdio@24520 { + status = "disabled"; + }; + + mdio@25520 { + status = "disabled"; + }; + + mdio@26520 { + status = "disabled"; + }; enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; fixed-link = <1 1 1000 0 0>; phy-connection-type = "rgmii-id"; }; + enet1: ethernet@25000 { + status = "disabled"; + }; + + enet2: ethernet@26000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + crypto@30000 { + status = "disabled"; + }; + mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; protected-sources = < 17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */ 16 20 21 22 23 28 /* L2, dma1, USB */ @@ -152,21 +185,24 @@ 0xe7 0>; interrupt-parent = <&mpic>; }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + + }; + + pci0: pcie@ffe08000 { + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + status = "disabled"; }; - pci1: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; + pci2: pcie@ffe0a000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi new file mode 100644 index 000000000000..6def17f265d3 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020si.dtsi @@ -0,0 +1,382 @@ +/* + * P2020 Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + compatible = "fsl,P2020"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + + }; + + sdhci@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p2020-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe08000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe08000 0 0x1000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + }; + + pci1: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + }; + + pci2: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + }; +}; -- cgit v1.2.1 From bc99d09abe14b4841454701c47e45f22444a890a Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Wed, 20 Apr 2011 09:42:44 +0530 Subject: powerpc/85xx: Fix PCIe IDSEL for Px020RDB PCIe device in legacy mode can trigger interrupts using the wires #INTA, #INTB ,#INTC and #INTD. PCI devices are obligated to use #INTx for interrupts under legacy mode. Each PCI slot or device is typically wired to different inputs on the interrupt controller. So, Define interrupt-map and interrupt-map-mask properties for device tree to of map each PCI interrupt signal to the inputs of the interrupt controller. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1020rdb.dts | 16 ++++++++++++++++ arch/powerpc/boot/dts/p2020rdb.dts | 16 ++++++++++++++++ arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 8 ++++++++ arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 8 ++++++++ 4 files changed, 48 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts index 7ed4793489ce..d6a8ae458137 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dts +++ b/arch/powerpc/boot/dts/p1020rdb.dts @@ -257,6 +257,14 @@ pci0: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 + >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -275,6 +283,14 @@ pci1: pcie@ffe0a000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index 60a0a8c725d6..3782a58f13be 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -249,6 +249,14 @@ pci1: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 + >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -267,6 +275,14 @@ pci2: pcie@ffe0a000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts index 72c912fd3dd9..fc8ddddfccb6 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts @@ -175,6 +175,14 @@ pci1: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 + >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts index eb572ccecb3d..261c34ba45ec 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts @@ -203,6 +203,14 @@ pci2: pcie@ffe0a000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; -- cgit v1.2.1 From 41cd08560bbf8371bbd00e783e992b0dc7e7c83d Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Thu, 28 Apr 2011 12:30:00 +0530 Subject: powerpc/85xx: Create dts of each core in CAMP mode for P1020RDB Create the dts files for each core and splits the devices between the two cores for P1020RDB. Core0 has core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. Core1 has l2, eth0, crypto. MPIC is shared between two cores but each core will protect its interrupts from other core by using "protected-sources" of mpic. Fix compatible property for global-util node of P1020si.dtsi. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1020rdb_camp_core0.dts | 213 ++++++++++++++++++++++++++ arch/powerpc/boot/dts/p1020rdb_camp_core1.dts | 148 ++++++++++++++++++ arch/powerpc/boot/dts/p1020si.dtsi | 2 +- 3 files changed, 362 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/boot/dts/p1020rdb_camp_core0.dts create mode 100644 arch/powerpc/boot/dts/p1020rdb_camp_core1.dts (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts new file mode 100644 index 000000000000..f0bf7f42f097 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts @@ -0,0 +1,213 @@ +/* + * P1020 RDB Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, + * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. + * + * Please note to add "-b 0" for core0's dts compiling. + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020si.dtsi" + +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP"; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + PowerPC,P1020@1 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + serial1: serial@4600 { + status = "disabled"; + }; + + spi@7000 { + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + status = "disabled"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mpic: pic@40000 { + protected-sources = < + 42 29 30 34 /* serial1, enet0-queue-group0 */ + 17 18 24 45 /* enet0-queue-group1, crypto */ + >; + }; + + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts new file mode 100644 index 000000000000..6ec02204a44e --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts @@ -0,0 +1,148 @@ +/* + * P1020 RDB Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, eth0, crypto. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020si.dtsi" + +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP"; + + aliases { + ethernet0 = &enet0; + serial0 = &serial1; + }; + + cpus { + PowerPC,P1020@0 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; + }; + + gpio: gpio-controller@f000 { + status = "disabled"; + }; + + dma@21300 { + status = "disabled"; + }; + + mdio@24000 { + status = "disabled"; + }; + + mdio@25000 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 16 /* ecm, mem, L2, pci0, pci1 */ + 43 42 59 /* i2c, serial0, spi */ + 47 63 62 /* gpio, tdm */ + 20 21 22 23 /* dma */ + 03 02 /* mdio */ + 35 36 40 /* enet1-queue-group0 */ + 51 52 67 /* enet1-queue-group1 */ + 31 32 33 /* enet2-queue-group0 */ + 25 26 27 /* enet2-queue-group1 */ + 28 72 58 /* usb, sdhci, crypto */ + 0xb0 0xb1 0xb2 /* message */ + 0xb3 0xb4 0xb5 + 0xb6 0xb7 + 0xe0 0xe1 0xe2 /* msi */ + 0xe3 0xe4 0xe5 + 0xe6 0xe7 /* sdhci, crypto , pci */ + >; + }; + + msi@41600 { + status = "disabled"; + }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi index f6f110096c5f..5c5acb66c3fc 100644 --- a/arch/powerpc/boot/dts/p1020si.dtsi +++ b/arch/powerpc/boot/dts/p1020si.dtsi @@ -343,7 +343,7 @@ }; global-utilities@e0000 { //global utilities block - compatible = "fsl,p1020-guts"; + compatible = "fsl,p1020-guts","fsl,p2020-guts"; reg = <0xe0000 0x1000>; fsl,has-rstcr; }; -- cgit v1.2.1