From 0df1a838d678fc6ab49f983a19e905f6a42297a0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:05:40 +0900 Subject: ARM: mach-shmobile: sh73a0 PINT IRQ base fix Bump up the sh73a0 PINT IRQ base from 768 to 800 to avoid collision with INTCS vectors for IRQ16->IRQ32 at 0x3xxx. Without this fix the sh73a0 IRQ pin handling code collides with the PINT code which results in hangs on Kota2 during boot. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/sh73a0.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a9686..cad57578ceed 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ -- cgit v1.2.1 From e2c31b3fdd48274e9deb450e21279e54dfa02ccd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:10:49 +0900 Subject: ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix Fix the sh73a0 external IRQ pin code to properly support CONFIG_SPARSE_IRQ=y by allocating IRQ descriptors for the cascaded IRQs associated with external IRQ pins. Without this fix it is impossible to request IRQ0->IRQ31 on the Kota2 board when sparse IRQs are enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh73a0.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e3..9857595eaa79 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ -- cgit v1.2.1 From 2fde109c2d79e9791250a5d212c13055e9216a55 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:14:07 +0900 Subject: ARM: mach-shmobile: IRQ driven GPIO key support for Kota2 Now when GPIO IRQs are supported on sh73a0 modify the Kota2 board code to switch from the polled "gpio-keys-polled" driver to the IRQ driven "gpio-keys" driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb0..c8e7ca23fc06 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, -- cgit v1.2.1 From d5bb386d70c8e8e79c7f652a794610e01d79f33e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 30 Aug 2011 18:26:44 +0200 Subject: ARM: mach-shmobile: simplify MMCIF DMA configuration Use the simplified method to specify MMCIF DMA slave configuration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 11 ++--------- arch/arm/mach-shmobile/board-ap4evb.c | 12 ++---------- arch/arm/mach-shmobile/board-mackerel.c | 12 ++---------- 3 files changed, 6 insertions(+), 29 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75ee..729eaee5a151 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f759..eeb4d9664584 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..1a955e2a334f 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1184,15 +1184,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1191,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { -- cgit v1.2.1 From 0ada2da51800a4914887a9bcf22d563be80e50be Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 17:32:05 -0800 Subject: ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd Current renesas_usbhs driver can use both USB host/gadget. This patch removes current r8a66597_hcd driver settings, and adds renesas_usbhs host driver settings for mackerel USB1 port. You can still use this port as "gadget" with small modify. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 73 ++++----------------------------- 1 file changed, 9 insertions(+), 64 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..f0cc307df640 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -676,51 +661,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +726,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +757,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1421,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); -- cgit v1.2.1 From 6d9b7dd0da1b619ed5f89ff7ab4bc3188c0f7e9f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 16:37:07 -0800 Subject: ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment current ak4642 needs amixer settings for playing which was not needed on old kernel. This patch show it on comment area Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index f0cc307df640..c4a6a9b16d1b 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -192,6 +192,16 @@ * */ +/* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + /* * FIXME !! * -- cgit v1.2.1 From 04f47a03c51c9f02fa27b0ecf4207e25c0741804 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 14:57:25 -0500 Subject: arm: fix compile failure in mach-shmobile/board-ag5evm.c Add videodev2 header which provides V4L2_PIX_FMT_RGB565 to fix: arch/arm/mach-shmobile/board-ag5evm.c:274: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) Signed-off-by: Paul Gortmaker Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index a4e6ca04e319..75596948029c 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From f5948bac5f22e7697fc782e45bdca20a27368512 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 22 Jan 2012 21:10:02 -0800 Subject: ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 16 +++-- arch/arm/mach-shmobile/clock-sh73a0.c | 113 ++++++++++++++++++++++++++++++++++ 2 files changed, 125 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 729eaee5a151..2e1334f56995 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -314,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -328,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e17..7727cca6136c 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) -- cgit v1.2.1 From 4856f1946d1f404f6ff96857d5a895187d9caa8b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 23 Jan 2012 15:52:03 +0100 Subject: ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372 This table is required to support the gpio_to_irq() translation. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/pfc-sh7372.c | 41 +++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6acf..336093f9210a 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) -- cgit v1.2.1 From 08a183f02b5fef1cd78d27ffc8281fa96d79f814 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 14 Feb 2012 16:33:27 +0100 Subject: ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7 architectures This patch expands the Kconfig dependencies for ARM_LPAE to not allow enabling when architectures other than ARMv7 are built into the kernel. Signed-off-by: Catalin Marinas Reported-by: Russell King Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca2488164..7edef9121632 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the -- cgit v1.2.1 From 8e43a905dd574f54c5715d978318290ceafbe275 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 15 Feb 2012 16:01:42 +0100 Subject: ARM: 7325/1: fix v7 boot with lockdep enabled Bootup with lockdep enabled has been broken on v7 since b46c0f74657d ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: Nicolas Pitre Acked-by: Stephen Boyd Cc: Catalin Marinas Cc: stable@vger.kernel.org Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 5 +++++ arch/arm/mm/cache-v7.S | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095d46de..23371b17b23e 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 7a24d39661f0..a655d3da386d 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -55,7 +55,7 @@ loop1: cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache #ifdef CONFIG_PREEMPT - save_and_disable_irqs r9 @ make cssr&csidr read atomic + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic #endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr -- cgit v1.2.1 From 4272f98a1ae81709fc5c804c33c044064e419cd9 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 16 Nov 2011 12:36:39 +0100 Subject: ARM: 7164/3: PL330: Fix the size of the dst_cache_ctrl field dst_cache_ctrl affects bits 3, 1 and 0 of AWCACHE but it is a 3-bit field in the Channel Control Register (see Table 3-21 of the DMA-330 Technical Reference Manual) and should be programmed as such. Reference: <1320244259-10496-3-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino Acked-by: Jassi Brar Signed-off-by: Russell King --- arch/arm/include/asm/hardware/pl330.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca0..c1821385abfa 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ -- cgit v1.2.1 From 46e33c606af8e0caeeca374103189663d877c0d6 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 15 Feb 2012 17:36:39 +0100 Subject: ARM: 7326/2: PL330: fix null pointer dereference in pl330_chan_ctrl() This fixes the thrd->req_running field being accessed before thrd is checked for null. The error was introduced in abb959f: ARM: 7237/1: PL330: Fix driver freeze Reference: <1326458191-23492-1-git-send-email-mans.rullgard@linaro.org> Cc: stable@kernel.org Signed-off-by: Mans Rullgard Acked-by: Javi Merino Signed-off-by: Russell King --- arch/arm/common/pl330.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047c..ff3ad2244824 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); -- cgit v1.2.1 From fee6a3c33a8f137f39cd9997b0476411f73576c7 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 15 Feb 2012 21:17:12 +0100 Subject: ARM: 7327/1: need to include asm/system.h in asm/processor.h For files that include asm/processor.h but not asm/system.h: arch/arm/mach-msm/include/mach/uncompress.h: In function 'putc': arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit declaration of function 'smp_mb' [-Werror=implicit-function-declaration] In this case, smp_mb() is from the cpu_relax() call in the msm putc(). It likely went uncaught when the uncompress.h change went in since the defconfig didn't enable that code path, but later changes (e76f4750f4: ARM: debug: arrange Kconfig options more logically) resulted in the option being on for msm_defconfig and thus exposed it. Signed-off-by: Olof Johansson Signed-off-by: Russell King --- arch/arm/include/asm/processor.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613c..cb8d638924fd 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include #include #include +#include #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ -- cgit v1.2.1 From 910ba598c818243cf3de2f97e03c49948bbb0511 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Tue, 21 Feb 2012 10:24:22 +0100 Subject: ARM: 7336/1: smp_twd: Don't register CPUFREQ notifiers if local timers are not initialised Current ARM local timer code registers CPUFREQ notifiers even in case the twd_timer_setup() isn't called. That seems to be wrong and would eventually lead to kernel crash on the CPU frequency transitions on the SOCs where the local timer doesn't exist or broken because of hardware BUG. Fix it by testing twd_evt and *__this_cpu_ptr(twd_evt). The issue was observed with v3.3-rc3 and building an OMAP2+ kernel on OMAP3 SOC which doesn't have TWD. Below is the dump for reference : Unable to handle kernel paging request at virtual address 007e900 pgd = cdc20000 [007e9000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP Modules linked in: CPU: 0 Not tainted (3.3.0-rc3-pm+debug+initramfs #9) PC is at twd_update_frequency+0x34/0x48 LR is at twd_update_frequency+0x10/0x48 pc : [] lr : [] psr: 60000093 sp : ce311dd8 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000001 r8 : ce310000 r7 : c0440458 r6 : c00137f8 r5 : 00000000 r4 : c0947a74 r3 : 00000000 r2 : 007e9000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment usr Control: 10c5387d Table: 8dc20019 DAC: 00000015 Process sh (pid: 599, stack limit = 0xce3102f8) Stack: (0xce311dd8 to 0xce312000) 1dc0: 6000c 1de0: 00000001 00000002 00000000 00000000 00000000 00000000 00000 1e00: ffffffff c093d8f0 00000000 ce311ebc 00000001 00000001 ce310 1e20: c001386c c0437c4c c0e95b60 c0e95ba8 00000001 c0e95bf8 ffff4 1e40: 00000000 00000000 c005ef74 ce310000 c0435cf0 ce311ebc 00000 1e60: ce352b40 0007a120 c08d5108 c08ba040 c08ba040 c005f030 00000 1e80: c08bc554 c032fe2c 0007a120 c08d4b64 ce352b40 c08d8618 ffff8 1ea0: c08ba040 c033364c ce311ecc c0433b50 00000002 ffffffea c0330 1ec0: 0007a120 0007a120 22222201 00000000 22222222 00000000 ce357 1ee0: ce3d6000 cdc2aed8 ce352ba0 c0470164 00000002 c032f47c 00034 1f00: c0331cac ce352b40 00000007 c032f6d0 ce352bbc 0003d090 c0930 1f20: c093d8bc c03306a4 00000007 ce311f80 00000007 cdc2aec0 ce358 1f40: ce8d20c0 00000007 b6fe5000 ce311f80 00000007 ce310000 0000c 1f60: c000de74 ce987400 ce8d20c0 b6fe5000 00000000 00000000 0000c 1f80: 00000000 00000000 001fbac8 00000000 00000007 001fbac8 00004 1fa0: c000df04 c000dd60 00000007 001fbac8 00000001 b6fe5000 00000 1fc0: 00000007 001fbac8 00000007 00000004 b6fe5000 00000000 00202 1fe0: 00000000 beb565f8 00101ffc 00008e8c 60000010 00000001 00000 [] (twd_update_frequency+0x34/0x48) from [] ) [] (smp_call_function_single+0x17c/0x1c8) from [] (twd_cpufreq_transition+0x24/0x30) from [) [] (notifier_call_chain+0x44/0x84) from [] () [] (__srcu_notifier_call_chain+0x70/0xa4) from [] (srcu_notifier_call_chain+0x18/0x20) from [] (cpufreq_notify_transition+0xc8/0x1b0) from [] (omap_target+0x1b4/0x28c) from [] (__cpuf) [] (__cpufreq_driver_target+0x50/0x64) from [] (cpufreq_set+0x78/0x98) from [] (store_sc) [] (store_scaling_setspeed+0x5c/0x74) from [) [] (store+0x58/0x74) from [] (sysfs_write_fi) [] (sysfs_write_file+0x80/0xb4) from [] (vfs) [] (vfs_write+0xa8/0x138) from [] (sys_write) [] (sys_write+0x40/0x6c) from [] (ret_fast_s) Code: e594300c e792210c e1a01000 e5840004 (e7930002) ---[ end trace 5da3b5167c1ecdda ]--- Reported-by: Kevin Hilman Acked-by: Marc Zyngier Tested-by: Kevin Hilman Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/kernel/smp_twd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 4285daa077b0..7a79b24597b2 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); -- cgit v1.2.1 From e23e8c0690d2952dce53e712d01d5b2179f98b64 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 7 Feb 2012 15:26:44 -0700 Subject: ARM/PCI: Remove ARM's duplicate definition of 'pcibios_max_latency' The patch series to re-factor PCI's 'latency timer' setup (re: http://marc.info/?l=linux-kernel&m=131983853831049&w=2) forgot to remove the ARM specific definition of 'pcibios_max_latency' once such had been moved into the pci core resulting in ARM related compile errors - drivers/built-in.o:(.data+0x230): multiple definition of `pcibios_max_latency' arch/arm/common/built-in.o:(.data+0x40c): first defined here make[1]: *** [vmlinux.o] Error 1 In the series, patch 2/16 (commit 168c8619fd8) converted the ARM specific version of 'pcibios_set_master()' to a non-inlined version. This was done in preperation for hosting it up into PCI's core, which was done in patch 10/16 (commit 96c5590058d) of the series (and where the removal of ARM's 'pcibios_max_latency' was overlooked). Reported-by: Russell King Signed-off-by: Myron Stowe Signed-off-by: Russell King --- arch/arm/common/it8152.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13ebc..fb1f1cfce60c 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ -- cgit v1.2.1 From 3ddd4d0c629f3d013aa1ab24bb0546dfe342ff94 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Feb 2012 11:28:06 +0000 Subject: ARM: OMAP: fix voltage domain build errors with PM_OPP disabled The voltage domain code wants the voltage tables, which are in the opp*.c files. These files aren't built when PM_OPP is disabled, causing the following build errors at link time: twl-common.c:(.init.text+0x2e48): undefined reference to `omap34xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e4c): undefined reference to `omap34xx_vddcore_volt_data' twl-common.c:(.init.text+0x2e5c): undefined reference to `omap36xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e60): undefined reference to `omap36xx_vddcore_volt_data' twl-common.c:(.init.text+0x2830): undefined reference to `omap44xx_vdd_mpu_volt_data' twl-common.c:(.init.text+0x283c): undefined reference to `omap44xx_vdd_iva_volt_data' twl-common.c:(.init.text+0x2844): undefined reference to `omap44xx_vdd_core_volt_data' Acked-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 2 ++ arch/arm/mach-omap2/voltagedomains44xx_data.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e383..57db2038b23c 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595d..c3115f6853d4 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; -- cgit v1.2.1 From 5180bb392a8aab5233e6db858ac1d8371533e20f Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 21 Feb 2012 11:26:55 -0500 Subject: ARM/audit: include audit header and fix audit arch Both bugs being fixed were introduced in: 29ef73b7a823b77a7cd0bdd7d7cded3fb6c2587b Include linux/audit.h to fix below build errors: CC arch/arm/kernel/ptrace.o arch/arm/kernel/ptrace.c: In function 'syscall_trace': arch/arm/kernel/ptrace.c:919: error: implicit declaration of function 'audit_syscall_exit' arch/arm/kernel/ptrace.c:921: error: implicit declaration of function 'audit_syscall_entry' arch/arm/kernel/ptrace.c:921: error: 'AUDIT_ARCH_ARMEB' undeclared (first use in this function) arch/arm/kernel/ptrace.c:921: error: (Each undeclared identifier is reported only once arch/arm/kernel/ptrace.c:921: error: for each function it appears in.) make[1]: *** [arch/arm/kernel/ptrace.o] Error 1 make: *** [arch/arm/kernel] Error 2 This part of the patch is: Reported-by: Axel Lin Reported-by: Peter Ujfalusi (They both provided patches to fix it) This patch also (at the request of the list) fixes the fact that ARM has both LE and BE versions however the audit code was called as if it was always BE. If audit userspace were to try to interpret the bits it got from a LE system it would obviously do so incorrectly. Fix this by using the right arch flag on the right system. This part of the patch is: Reported-by: Russell King - ARM Linux Signed-off-by: Eric Paris Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e33870ff0ac0..ede6443c34d9 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) -- cgit v1.2.1 From 689189fb014203965ed89833d8d5566424540c9d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 30 Jan 2012 11:03:49 +0900 Subject: ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix Convert the sh73a0 SMP code to use 32-bit PSTR access. This fixes wakeup from deep sleep for sh73a0 secondary CPUs. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/smp-sh73a0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0d159d64a345..2d0d4212be41 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) + if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ else __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ -- cgit v1.2.1 From 74eb436ec057e31e35addda35f9b94ee813cb633 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 30 Jan 2012 11:25:07 +0900 Subject: ARM: mach-shmobile: r8a7779 PFC IPSR4 fix Fix the bit field width information for the IPSR4 register in the r8a7779 pin function controller (PFC). Without this fix the Marzen board fails to receive data over the serial console due to misconfigured pin function for the RX pin. Signed-off-by: Magnus Damm Tested-by: Kuninori Morimoto Tested-by: Simon Horman Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/pfc-r8a7779.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f2b2c4..d14c9b048077 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_AUDATA3, 0, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, + 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { /* IP4_31_29 [3] */ FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, -- cgit v1.2.1 From 7372a4cd6c6fe07ae9d7d0340717736fba863580 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Thu, 16 Feb 2012 15:46:38 +0100 Subject: arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 9245f21c29d1..068b754bc348 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -38,7 +38,6 @@ #include #include #include -#include #include