From 531ee1f4ea7fb5634cb79824e6df6be83596a054 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sat, 17 Oct 2015 21:05:21 -0700 Subject: ARM: dts: vf610: fix clock definition for SAI2 So far, only the bus clock has been assigned, but in reality the SAI IP has for clock inputs. The driver has been updated to make use of the additional clock inputs by c3ecef21c3f2 ("ASoC: fsl_sai: add sai master mode support"). Due to a bug in the clock tree, the audio clock has been enabled none the less by the specified bus clock (see "ARM: imx: clk-vf610: fix SAI clock tree"), which made master mode even without the proper clock assigned working. This patch completes the clock definition for SAI2. On Vybrid, only two MCLK out of the four options are available (the first being the bus clock itself). See chapter 8.10.1.2.3 of the Vybrid Reference manual ("SAI transmitter and receiver options for MCLK selection"). Note: The audio clocks are only required in master mode. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vfxxx.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 0d5acc2cdc8e..3cd1b27f2697 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -178,8 +178,10 @@ compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_SAI2>; - clock-names = "sai"; + clocks = <&clks VF610_CLK_SAI2>, + <&clks VF610_CLK_SAI2_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 0 21>, <&edma0 0 20>; -- cgit v1.2.1 From 9c17190595840b4ed30e8d5f286636ceb28aae4f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 30 Nov 2015 17:59:26 -0800 Subject: ARM: dts: vf610: use reset values for L2 cache latencies Linux on Vybrid used several different L2 latencies so far, none of them seem to be the right ones. According to the application note AN4947 ("Understanding Vybrid Architecture"), the tag portion runs on CPU clock and is inside the L2 cache controller, whereas the data portion is stored in the external SRAM running on platform clock. Hence it is likely that the correct value requires a higher data latency then tag latency. These are the values which have been used so far: - The mainline values: arm,data-latency = <1 1 1>; arm,tag-latency = <2 2 2>; Those values have lead to problems on higher clocks. They look like a poor translation from the reset values (missing +1 offset and a mix up between tag/latency values). - The Linux 3.0 (SoC vendor BSP) values (converted to DT notation): arm,data-latency = <4 2 3> arm,tag-latency = <4 2 3> The cache initialization function along with the value matches the i.MX6 code from the same kernel, so it seems that those values have just been copied. - The Colibri values: arm,data-latency = <2 1 2>; arm,tag-latency = <3 2 3>; Those were a mix between the values of the Linux 3.0 based BSP and the mainline values above. - The SoC Reset values (converted to DT notation): arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; So far there is no official statement on what the correct values are. See also the related Freescale community thread: https://community.freescale.com/message/579785#579785 For now, the reset values seem to be the best bet. Remove all other "bogus" values and use the reset value on vf610.dtsi level. Signed-off-by: Stefan Agner Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-colibri.dtsi | 5 ----- arch/arm/boot/dts/vf610.dtsi | 2 +- 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 19fe045b8334..2d7eab755210 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -18,8 +18,3 @@ reg = <0x80000000 0x10000000>; }; }; - -&L2 { - arm,data-latency = <2 1 2>; - arm,tag-latency = <3 2 3>; -}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 5f8eb1bd782b..58bc6e448be5 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -19,7 +19,7 @@ reg = <0x40006000 0x1000>; cache-unified; cache-level = <2>; - arm,data-latency = <1 1 1>; + arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; }; }; -- cgit v1.2.1