From 138de1c44a8e0606501cd8593407e9248e84f1b7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 27 May 2010 08:23:29 +0100 Subject: ARM: VFP: Fix vfp_put_double() for d16-d31 vfp_put_double() takes the double value in r0,r1 not r1,r2. Reported-by: Tarun Kanti DebBarma Cc: Signed-off-by: Russell King --- arch/arm/vfp/vfphw.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 66dc2d03b7fc..d66cead97d28 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -277,7 +277,7 @@ ENTRY(vfp_put_double) #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr +1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr mov pc, lr .org 1b + 8 .endr -- cgit v1.2.1 From ea208f646c8fb91c39c852e952fc911e1ad045ab Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 26 May 2010 07:37:57 +0100 Subject: ARM: 6144/1: TCM memory bug freeing bug This fixes a bug in mm/init.c when freeing the TCM compile memory, this was being referred to as a char * which is incorrect: this will dereference the pointer and feed in the value at the location instead of the address to it. Change it to a plain char and use &(char) to reference it. Signed-off-by: Linus Walleij Cc: Signed-off-by: Russell King --- arch/arm/mm/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 1ba6cf5a2c02..f6a999465323 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -678,10 +678,10 @@ void __init mem_init(void) void free_initmem(void) { #ifdef CONFIG_HAVE_TCM - extern char *__tcm_start, *__tcm_end; + extern char __tcm_start, __tcm_end; - totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)), - __phys_to_pfn(__pa(__tcm_end)), + totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), + __phys_to_pfn(__pa(&__tcm_end)), "TCM link"); #endif -- cgit v1.2.1 From ba327b1e5296b70745e50bcf0446ae8f82e3d478 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 26 May 2010 07:38:54 +0100 Subject: ARM: 6145/1: ux500 MTU clockrate correction This adjusts the clockrate for the MTU timer. On the different UX500 variants this rate is different. The platform can also have been set up at hardware initialization, bootloader or early init for different clock speeds. To have the clock framework available early so the timers can use them, the clock initialization for Nomadik and ux500 is moved to IRQ init time. A custom per-clock callback is added to handle special cases like this. This solves a user-visible bug: without this patch the current UX500 platforms will not be synchronized to wall-clock time and the platform will drift in time. Acked-by: Rabin Vincent Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-nomadik/clock.c | 11 +++-- arch/arm/mach-nomadik/clock.h | 2 + arch/arm/mach-nomadik/cpu-8815.c | 8 +++ arch/arm/mach-ux500/clock.c | 104 ++++++++++++++++++++++++++++++++++++--- arch/arm/mach-ux500/clock.h | 22 +++++++++ arch/arm/mach-ux500/cpu.c | 6 +++ arch/arm/plat-nomadik/timer.c | 26 +++++++++- 7 files changed, 167 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c index 2c471fc451d7..f035f4185274 100644 --- a/arch/arm/mach-nomadik/clock.c +++ b/arch/arm/mach-nomadik/clock.c @@ -32,7 +32,10 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -/* We have a fixed clock alone, for now */ +static struct clk clk_24 = { + .rate = 2400000, +}; + static struct clk clk_48 = { .rate = 48 * 1000 * 1000, }; @@ -50,6 +53,8 @@ static struct clk clk_default; } static struct clk_lookup lookups[] = { + CLK(&clk_24, "mtu0"), + CLK(&clk_24, "mtu1"), CLK(&clk_48, "uart0"), CLK(&clk_48, "uart1"), CLK(&clk_default, "gpio.0"), @@ -59,10 +64,8 @@ static struct clk_lookup lookups[] = { CLK(&clk_default, "rng"), }; -static int __init clk_init(void) +int __init clk_init(void) { clkdev_add_table(lookups, ARRAY_SIZE(lookups)); return 0; } - -arch_initcall(clk_init); diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h index 5563985a2cc7..78da2e7c3985 100644 --- a/arch/arm/mach-nomadik/clock.h +++ b/arch/arm/mach-nomadik/clock.h @@ -11,3 +11,5 @@ struct clk { unsigned long rate; }; + +int __init clk_init(void); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 91c3c901b469..ac58e3b03b1a 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -31,6 +31,8 @@ #include #include +#include "clock.h" + #define __MEM_4K_RESOURCE(x) \ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} @@ -143,6 +145,12 @@ void __init cpu8815_init_irq(void) /* This modified VIC cell has two register blocks, at 0 and 0x20 */ vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0); vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0); + + /* + * Init clocks here so that they are available for system timer + * initialization. + */ + clk_init(); } /* diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 1b2c9890e8b4..b5fc2e21961d 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -16,6 +16,7 @@ #include +#include #include #include "clock.h" @@ -59,6 +60,9 @@ #define PRCM_DMACLK_MGT 0x074 #define PRCM_B2R2CLK_MGT 0x078 #define PRCM_TVCLK_MGT 0x07C +#define PRCM_TCR 0x1C8 +#define PRCM_TCR_STOPPED (1 << 16) +#define PRCM_TCR_DOZE_MODE (1 << 17) #define PRCM_UNIPROCLK_MGT 0x278 #define PRCM_SSPCLK_MGT 0x280 #define PRCM_RNGCLK_MGT 0x284 @@ -120,10 +124,95 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); +/* + * The MTU has a separate, rather complex muxing setup + * with alternative parents (peripheral cluster or + * ULP or fixed 32768 Hz) depending on settings + */ +static unsigned long clk_mtu_get_rate(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + PRCM_TCR; + u32 tcr = readl(addr); + int mtu = (int) clk->data; + /* + * One of these is selected eventually + * TODO: Replace the constant with a reference + * to the ULP source once this is modeled. + */ + unsigned long clk32k = 32768; + unsigned long mturate; + unsigned long retclk; + + /* Get the rate from the parent as a default */ + if (clk->parent_periph) + mturate = clk_get_rate(clk->parent_periph); + else if (clk->parent_cluster) + mturate = clk_get_rate(clk->parent_cluster); + else + /* We need to be connected SOMEWHERE */ + BUG(); + + /* + * Are we in doze mode? + * In this mode the parent peripheral or the fixed 32768 Hz + * clock is fed into the block. + */ + if (!(tcr & PRCM_TCR_DOZE_MODE)) { + /* + * Here we're using the clock input from the APE ULP + * clock domain. But first: are the timers stopped? + */ + if (tcr & PRCM_TCR_STOPPED) { + clk32k = 0; + mturate = 0; + } else { + /* Else default mode: 0 and 2.4 MHz */ + clk32k = 0; + if (cpu_is_u5500()) + /* DB5500 divides by 8 */ + mturate /= 8; + else if (cpu_is_u8500ed()) { + /* + * This clocking setting must not be used + * in the ED chip, it is simply not + * connected anywhere! + */ + mturate = 0; + BUG(); + } else + /* + * In this mode the ulp38m4 clock is divided + * by a factor 16, on the DB8500 typically + * 38400000 / 16 ~ 2.4 MHz. + * TODO: Replace the constant with a reference + * to the ULP source once this is modeled. + */ + mturate = 38400000 / 16; + } + } + + /* Return the clock selected for this MTU */ + if (tcr & (1 << mtu)) + retclk = clk32k; + else + retclk = mturate; + + pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk); + return retclk; +} + unsigned long clk_get_rate(struct clk *clk) { unsigned long rate; + /* + * If there is a custom getrate callback for this clock, + * it will take precedence. + */ + if (clk->get_rate) + return clk->get_rate(clk); + if (clk->ops && clk->ops->get_rate) return clk->ops->get_rate(clk); @@ -341,8 +430,9 @@ static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); /* Peripheral Cluster #6 */ -static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL); -static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL); +/* MTU ID in data */ +static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1); +static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0); static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); @@ -357,8 +447,9 @@ static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); /* Peripheral Cluster #7 */ static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); -static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL); -static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL); +/* MTU ID in data */ +static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1); +static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0); static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); @@ -503,15 +594,17 @@ static struct clk_lookup u8500_v1_clks[] = { CLK(uiccclk, "uicc", NULL), }; -static int __init clk_init(void) +int __init clk_init(void) { if (cpu_is_u8500ed()) { clk_prcmu_ops.enable = clk_prcmu_ed_enable; clk_prcmu_ops.disable = clk_prcmu_ed_disable; + clk_per6clk.rate = 100000000; } else if (cpu_is_u5500()) { /* Clock tree for U5500 not implemented yet */ clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; + clk_per6clk.rate = 26000000; } clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); @@ -522,4 +615,3 @@ static int __init clk_init(void) return 0; } -arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h index e4f99b65026f..a05802501527 100644 --- a/arch/arm/mach-ux500/clock.h +++ b/arch/arm/mach-ux500/clock.h @@ -28,6 +28,9 @@ struct clkops { * @ops: pointer to clkops struct used to control this clock * @name: name, for debugging * @enabled: refcount. positive if enabled, zero if disabled + * @get_rate: custom callback for getting the clock rate + * @data: custom per-clock data for example for the get_rate + * callback * @rate: fixed rate for clocks which don't implement * ops->getrate * @prcmu_cg_off: address offset of the combined enable/disable register @@ -67,6 +70,8 @@ struct clk { const struct clkops *ops; const char *name; unsigned int enabled; + unsigned long (*get_rate)(struct clk *); + void *data; unsigned long rate; struct list_head list; @@ -117,9 +122,26 @@ struct clk clk_##_name = { \ .parent_periph = _kernclk \ } +#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcc_ops, \ + .cluster = _pclust, \ + .prcc_bus = _bus_en, \ + .prcc_kernel = _kernel_en, \ + .parent_cluster = &clk_per##_pclust##clk, \ + .parent_periph = _kernclk, \ + .get_rate = _callback, \ + .data = (void *) _data \ + } + + #define CLK(_clk, _devname, _conname) \ { \ .clk = &clk_##_clk, \ .dev_id = _devname, \ .con_id = _conname, \ } + +int __init clk_db8500_ed_fixup(void); +int __init clk_init(void); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index d81ad023963c..e0fd747e447a 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -62,6 +62,12 @@ void __init ux500_init_irq(void) { gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29); gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); + + /* + * Init clocks here so that they are available for system timer + * initialization. + */ + clk_init(); } #ifdef CONFIG_CACHE_L2X0 diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 0ff3798769ab..08aaa4a7f65f 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -13,7 +13,9 @@ #include #include #include +#include #include +#include #include #include @@ -124,13 +126,25 @@ static struct irqaction nmdk_timer_irq = { void __init nmdk_timer_init(void) { unsigned long rate; - u32 cr = MTU_CRn_32BITS;; + struct clk *clk0; + struct clk *clk1; + u32 cr; + + clk0 = clk_get_sys("mtu0", NULL); + BUG_ON(IS_ERR(clk0)); + + clk1 = clk_get_sys("mtu1", NULL); + BUG_ON(IS_ERR(clk1)); + + clk_enable(clk0); + clk_enable(clk1); /* * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: * use a divide-by-16 counter if it's more than 16MHz */ - rate = CLOCK_TICK_RATE; + cr = MTU_CRn_32BITS;; + rate = clk_get_rate(clk0); if (rate > 16 << 20) { rate /= 16; cr |= MTU_CRn_PRESCALE_16; @@ -153,6 +167,14 @@ void __init nmdk_timer_init(void) nmdk_clksrc.name); /* Timer 1 is used for events, fix according to rate */ + cr = MTU_CRn_32BITS; + rate = clk_get_rate(clk1); + if (rate > 16 << 20) { + rate /= 16; + cr |= MTU_CRn_PRESCALE_16; + } else { + cr |= MTU_CRn_PRESCALE_1; + } writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); nmdk_clkevt.max_delta_ns = -- cgit v1.2.1 From 3defb2476166445982a90c12d33f8947e75476c4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Va=C5=A1ut?= Date: Wed, 26 May 2010 23:53:09 +0100 Subject: ARM: 6146/1: sa1111: Prevent deadlock in resume path This patch reorganises the sa1111_resume() function in a manner the spinlock happens after calling the sa1111_wake(). This fixes two bugs: 1) This function called sa1111_wake() which tried to claim the same spinlock the sa1111_resume() already claimed. This would result in certain deadlock. Original idea for this part: Russell King 2) The function didn't unlock the spinlock in case the chip didn't report correct ID. Original idea for this part: Julia Lawall Signed-off-by: Marek Vasut Cc: Signed-off-by: Russell King --- arch/arm/common/sa1111.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index a52a27c1d9be..6f80665f477e 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -951,8 +951,6 @@ static int sa1111_resume(struct platform_device *dev) if (!save) return 0; - spin_lock_irqsave(&sachip->lock, flags); - /* * Ensure that the SA1111 is still here. * FIXME: shouldn't do this here. @@ -969,6 +967,13 @@ static int sa1111_resume(struct platform_device *dev) * First of all, wake up the chip. */ sa1111_wake(sachip); + + /* + * Only lock for write ops. Also, sa1111_wake must be called with + * released spinlock! + */ + spin_lock_irqsave(&sachip->lock, flags); + sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0); sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1); -- cgit v1.2.1 From 600ae40df788d282523b1b86624b83f7a11a97cb Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Thu, 20 May 2010 10:31:46 +0200 Subject: [ARM] pxa/palmtc: storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Acked-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 033b567e50bb..ce1104d1bc17 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -263,11 +263,11 @@ const struct matrix_keymap_data palmtc_keymap_data = { .keymap_size = ARRAY_SIZE(palmtc_matrix_keys), }; -const static unsigned int palmtc_keypad_row_gpios[] = { +static const unsigned int palmtc_keypad_row_gpios[] = { 0, 9, 10, 11 }; -const static unsigned int palmtc_keypad_col_gpios[] = { +static const unsigned int palmtc_keypad_col_gpios[] = { 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80 }; -- cgit v1.2.1 From d30e5d897c3da7c2d17c8112331b66ed953eec78 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 28 May 2010 04:42:59 +0200 Subject: [ARM] pxa/spitz: Correctly register WM8750 This patch registers the WM8750 codec on a proper place on the SPITZ machine after the WM8750 driver was converted to new API. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4d2413ed0ffa..c1048a35f187 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = { .type = "max7310", .addr = 0x18, .platform_data = &akita_ioexp, + }, { + .type = "wm8750", + .addr = 0x1b, }, }; -- cgit v1.2.1 From b394eebdd3d436f1796e53b97799554c5aa77431 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 31 May 2010 09:28:30 +0100 Subject: ARM: 6152/1: ux500 make it possible to disable localtimers Currently compilation of ux500 fails if you deselect the kernel feature for localtimers. Acked-by: Srinidhi Kasagar Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-ux500/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index c7bc4199e3a8..4556aea9c3c5 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o obj-$(CONFIG_MACH_U5500) += board-u5500.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -- cgit v1.2.1 From 17ebba1fe4da4b5d62782be8743e0e8231812af9 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 7 Jun 2010 21:28:55 +0100 Subject: ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debugging When CONFIG_DEBUG_HIGHMEM is used, the fixmap entry used for a highmem page by kmap_atomic() is always cleared by kunmap_atomic(). This helps find bad usages such as dereferences after the unmap, or overflow into the adjacent fixmap areas. But this debugging aid is completely bypassed when a kmap for the same page already exists as the kmap is reused instead. ON VIVT systems we have no choice but to reuse that kmap due to cache coherency issues, but on non VIVT systems we should always force the fixmap usage when debugging is active. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/highmem.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 77b030f5ec09..086816b205b8 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -48,7 +48,16 @@ void *kmap_atomic(struct page *page, enum km_type type) debug_kmap_atomic(type); - kmap = kmap_high_get(page); +#ifdef CONFIG_DEBUG_HIGHMEM + /* + * There is no cache coherency issue when non VIVT, so force the + * dedicated kmap usage for better debugging purposes in that case. + */ + if (!cache_is_vivt()) + kmap = NULL; + else +#endif + kmap = kmap_high_get(page); if (kmap) return kmap; -- cgit v1.2.1 From 5e27fb78df95e027723af2c90ecc9b4527ae59e9 Mon Sep 17 00:00:00 2001 From: Anfei Date: Tue, 8 Jun 2010 15:16:49 +0100 Subject: ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6 Instruction faults on pre-ARMv6 CPUs are interpreted as a 'translation fault', but do_translation_fault doesn't handle well if user mode trying to run instruction above TASK_SIZE, and result in the infinite retry of that instruction. CC: Signed-off-by: Anfei Zhou Signed-off-by: Russell King --- arch/arm/mm/fault.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 92f5801f99c1..cbfb2edcf7d1 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -393,6 +393,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (addr < TASK_SIZE) return do_page_fault(addr, fsr, regs); + if (user_mode(regs)) + goto bad_area; + index = pgd_index(addr); /* -- cgit v1.2.1 From 9a40ac86152c9cffd3dca482a15ddf9a8c5716b3 Mon Sep 17 00:00:00 2001 From: Khem Raj Date: Fri, 4 Jun 2010 04:05:15 +0100 Subject: ARM: 6164/1: Add kto and kfrom to input operands list. When functions incoming parameters are not in input operands list gcc 4.5 does not load the parameters into registers before calling this function but the inline assembly assumes valid addresses inside this function. This breaks the code because r0 and r1 are invalid when execution enters v4wb_copy_user_page () Also the constant needs to be used as third input operand so account for that as well. Tested on qemu arm. CC: Signed-off-by: Khem Raj Signed-off-by: Russell King --- arch/arm/mm/copypage-feroceon.c | 4 ++-- arch/arm/mm/copypage-v4wb.c | 4 ++-- arch/arm/mm/copypage-v4wt.c | 4 ++-- arch/arm/mm/copypage-xsc3.c | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index 5eb4fd93893d..ac163de7dc01 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -18,7 +18,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4-r9, lr} \n\ - mov ip, %0 \n\ + mov ip, %2 \n\ 1: mov lr, r1 \n\ ldmia r1!, {r2 - r9} \n\ pld [lr, #32] \n\ @@ -64,7 +64,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom) mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\ ldmfd sp!, {r4-r9, pc}" : - : "I" (PAGE_SIZE)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE)); } void feroceon_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index 7c2eb55cd4a9..cb589cbb2b6c 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -27,7 +27,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %0 @ 1\n\ + mov r2, %2 @ 1\n\ ldmia r1!, {r3, r4, ip, lr} @ 4\n\ 1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ stmia r0!, {r3, r4, ip, lr} @ 4\n\ @@ -44,7 +44,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom) mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\ ldmfd sp!, {r4, pc} @ 3" : - : "I" (PAGE_SIZE / 64)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); } void v4wb_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index 172e6a55458e..30c7d048a324 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -25,7 +25,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %0 @ 1\n\ + mov r2, %2 @ 1\n\ ldmia r1!, {r3, r4, ip, lr} @ 4\n\ 1: stmia r0!, {r3, r4, ip, lr} @ 4\n\ ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ @@ -40,7 +40,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom) mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\ ldmfd sp!, {r4, pc} @ 3" : - : "I" (PAGE_SIZE / 64)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); } void v4wt_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 747ad4140fc7..f9cde0702f1e 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -34,7 +34,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4, r5, lr} \n\ - mov lr, %0 \n\ + mov lr, %2 \n\ \n\ pld [r1, #0] \n\ pld [r1, #32] \n\ @@ -67,7 +67,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom) \n\ ldmfd sp!, {r4, r5, pc}" : - : "I" (PAGE_SIZE / 64 - 1)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1)); } void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, -- cgit v1.2.1