From 8d2602e0778299e2d6084f03086b716d6e7a1e1e Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 20 Aug 2010 16:44:33 +0200 Subject: AT91: change dma resource index Reported-by: Dan Liang Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91sam9g45_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 809114d5a5a6..501ac6fae2e7 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = { .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1, .flags = IORESOURCE_MEM, }, - [2] = { + [1] = { .start = AT91SAM9G45_ID_DMA, .end = AT91SAM9G45_ID_DMA, .flags = IORESOURCE_IRQ, -- cgit v1.2.1 From 5afddee415c829704d3a91031ae634008bc332e9 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 9 Sep 2010 19:58:23 +0200 Subject: AT91: clock: peripheral clocks can have other parent than mck While registering clock allow to set parent clock other than mck. It is useful for clocks than can be seen as child clock of a peripheral. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Andrew Victor --- arch/arm/mach-at91/clock.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 7f7da439341f..7525cee3983f 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init); int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { - clk->parent = &mck; + if (!clk->parent) + clk->parent = &mck; clk->mode = pmc_periph_mode; list_add_tail(&clk->node, &clocks); } -- cgit v1.2.1 From ab64511cbbd03196d84bcc32c6e7b9d46543df7b Mon Sep 17 00:00:00 2001 From: Fabian Godehardt Date: Fri, 3 Sep 2010 13:31:33 +0100 Subject: AT91: SAM9G45 - add a separate clock entry for every single TC block Without this patch you will not be able to register the first block because of the second association call on at91_add_device_tc(). Signed-off-by: Fabian Godehardt [nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk] Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Andrew Victor Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91sam9g45.c | 15 ++++++++++++--- arch/arm/mach-at91/at91sam9g45_devices.c | 4 ++-- 2 files changed, 14 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 753c0d31a3d3..c67b47f1c0fd 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -121,8 +121,8 @@ static struct clk ssc1_clk = { .pmc_mask = 1 << AT91SAM9G45_ID_SSC1, .type = CLK_TYPE_PERIPHERAL, }; -static struct clk tcb_clk = { - .name = "tcb_clk", +static struct clk tcb0_clk = { + .name = "tcb0_clk", .pmc_mask = 1 << AT91SAM9G45_ID_TCB, .type = CLK_TYPE_PERIPHERAL, }; @@ -192,6 +192,14 @@ static struct clk ohci_clk = { .parent = &uhphs_clk, }; +/* One additional fake clock for second TC block */ +static struct clk tcb1_clk = { + .name = "tcb1_clk", + .pmc_mask = 0, + .type = CLK_TYPE_PERIPHERAL, + .parent = &tcb0_clk, +}; + static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = { &spi1_clk, &ssc0_clk, &ssc1_clk, - &tcb_clk, + &tcb0_clk, &pwm_clk, &tsc_clk, &dma_clk, @@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = { &mmc1_clk, // irq0 &ohci_clk, + &tcb1_clk, }; /* diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 501ac6fae2e7..5e71ccd5e7d3 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); + at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); + at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else -- cgit v1.2.1 From 1879c45cce6411fe97b0b65ccad38f5206700dda Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 10 Sep 2010 11:38:43 +0200 Subject: AT91: dm9000 initialization update Add information in dm9000 mac/phy chip initialization: - irq resource details - platform data details Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-sam9261ek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c4c8865d52d7..b4307aba523d 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = { .start = AT91_PIN_PC11, .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } }; static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, + .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, }; static struct platform_device dm9000_device = { -- cgit v1.2.1 From 64d72bbeeb68b536a27319471f212d413f58bf6f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 10 Sep 2010 11:26:42 +0200 Subject: AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC The sd/mmc data structure is not used if SPI is selected. The configuration of PIO on the board prevent from using both interfaces at the same time (board dependent). Remove the warnings at compilation time adding a preprocessor condition. Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-sam9261ek.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b4307aba523d..19d4d2cbc9c4 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -168,17 +168,6 @@ static struct at91_udc_data __initdata ek_udc_data = { }; -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, -// .det_pin = ... not connected -// .wp_pin = ... not connected -// .vcc_pin = ... not connected -}; - - /* * NAND flash */ @@ -247,6 +236,10 @@ static void __init ek_add_device_nand(void) at91_add_device_nand(&ek_nand_data); } +/* + * SPI related devices + */ +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* * ADS7846 Touchscreen @@ -357,6 +350,21 @@ static struct spi_board_info ek_spi_devices[] = { #endif }; +#else /* CONFIG_SPI_ATMEL_* */ + +/* + * MCI (SD/MMC) + * spi0 and mmc/sd share the same PIO pins: cannot be used at the same time + */ +static struct at91_mmc_data __initdata ek_mmc_data = { + .wire4 = 1, +// .det_pin = ... not connected +// .wp_pin = ... not connected +// .vcc_pin = ... not connected +}; + +#endif /* CONFIG_SPI_ATMEL_* */ + /* * LCD Controller -- cgit v1.2.1 From 4deb22a6001eb0d4058295c3645c36190a0ec603 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 10 Sep 2010 14:36:06 +0200 Subject: AT91: at91sam9261ek: remove C99 comments but keep information Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-sam9261ek.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 19d4d2cbc9c4..65eb0943194f 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -351,16 +351,14 @@ static struct spi_board_info ek_spi_devices[] = { }; #else /* CONFIG_SPI_ATMEL_* */ +/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */ /* * MCI (SD/MMC) - * spi0 and mmc/sd share the same PIO pins: cannot be used at the same time + * det_pin, wp_pin and vcc_pin are not connected */ static struct at91_mmc_data __initdata ek_mmc_data = { .wire4 = 1, -// .det_pin = ... not connected -// .wp_pin = ... not connected -// .vcc_pin = ... not connected }; #endif /* CONFIG_SPI_ATMEL_* */ -- cgit v1.2.1