From a61326c076f25b7b808cccb827576808ec1cfa9d Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Sat, 19 Jan 2019 15:42:47 -0500 Subject: arm64: dts: qcom: pm8005: add interrupt controller properties Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 4d5aca3eeb69..c0ddf128136c 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -16,10 +16,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; -- cgit v1.2.1 From a1738363e41a65733a0d277d8189efa98315fdff Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Sat, 19 Jan 2019 15:42:48 -0500 Subject: arm64: dts: qcom: pm8998: add interrupt controller properties Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- arch/arm64/boot/dts/qcom/pm8998.dtsi | 28 ++-------------------------- 1 file changed, 2 insertions(+), 26 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index f1025a50c227..43cb5ea14089 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -94,32 +94,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>, - <0 0xd6 0 IRQ_TYPE_NONE>, - <0 0xd7 0 IRQ_TYPE_NONE>, - <0 0xd8 0 IRQ_TYPE_NONE>, - <0 0xd9 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; -- cgit v1.2.1 From 8cff9c8a78810ca09fd7c4d6d5d4f86a8b113059 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Sat, 19 Jan 2019 15:42:49 -0500 Subject: arm64: dts: qcom: pmi8994: add interrupt controller properties Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- arch/arm64/boot/dts/qcom/pmi8994.dtsi | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index dae1cdc23f54..3aee10e3f921 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -15,16 +15,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <2 0xc0 0 IRQ_TYPE_NONE>, - <2 0xc1 0 IRQ_TYPE_NONE>, - <2 0xc2 0 IRQ_TYPE_NONE>, - <2 0xc3 0 IRQ_TYPE_NONE>, - <2 0xc4 0 IRQ_TYPE_NONE>, - <2 0xc5 0 IRQ_TYPE_NONE>, - <2 0xc6 0 IRQ_TYPE_NONE>, - <2 0xc7 0 IRQ_TYPE_NONE>, - <2 0xc8 0 IRQ_TYPE_NONE>, - <2 0xc9 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; -- cgit v1.2.1 From f14a5e6da4a50e78a18384faf81eef6171909d3f Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Sat, 19 Jan 2019 15:42:50 -0500 Subject: arm64: dts: qcom: pmi8998: add interrupt controller properties Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index da3285e216e2..051f57e7d6ac 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -14,20 +14,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; -- cgit v1.2.1