From 0aed043517ad4135cb458a46e9e99e21cbb59c69 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 22 Sep 2010 16:06:27 -0700 Subject: OMAP: GPIO: ensure debounce clocks are disabled during idle/suspend If a GPIO bank has more than one GPIO with debounce enabled, the debounce clock will not be fully disabled before going to idle/suspend. In the idle path, we just do a single clk_disable() of the bank's debounce clock. If there are multiple debounce-enabled GPIOs in the bank, that clocks usage count will be > 1, so the clk_disable() will not actually disable the clock. So the fix is to clk_disable() for every debounce-enabled GPIO in the bank (and an equivalent clk_enable() of course.) Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/gpio.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/plat-omap/gpio.c') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7951eefe1a0e..11c5b0eefb85 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -2085,8 +2085,9 @@ void omap2_gpio_prepare_for_idle(int power_state) for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l1, l2; + int j; - if (bank->dbck_enable_mask) + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) clk_disable(bank->dbck); if (power_state > PWRDM_POWER_OFF) @@ -2152,8 +2153,9 @@ void omap2_gpio_resume_after_idle(void) for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l, gen, gen0, gen1; + int j; - if (bank->dbck_enable_mask) + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) clk_enable(bank->dbck); if (!workaround_enabled) -- cgit v1.2.1