From 09dafe9e4e266c7868454a532c9ca762aa5c40a5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 04:32:08 +0000 Subject: ARM: mach-shmobile: sh73a0 PFC pull-up support for SDHI0+2 Extend the existing sh73a0 PFC code with pull-ups for SDHI0 and SDHI2. Without this patch only SDHI1 has pull-up support on sh73a0. Needed by boards that make use of the internal pull-up resistor support built in the SoC. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/sh73a0.h | 13 +++++ arch/arm/mach-shmobile/pfc-sh73a0.c | 77 ++++++++++++++++++++++------ 2 files changed, 75 insertions(+), 15 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 216c3d695ef1..b385e976797a 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -451,11 +451,23 @@ enum { GPIO_FN_KEYIN5_PU, GPIO_FN_KEYIN6_PU, GPIO_FN_KEYIN7_PU, + GPIO_FN_SDHICD0_PU, + GPIO_FN_SDHID0_0_PU, + GPIO_FN_SDHID0_1_PU, + GPIO_FN_SDHID0_2_PU, + GPIO_FN_SDHID0_3_PU, + GPIO_FN_SDHICMD0_PU, + GPIO_FN_SDHIWP0_PU, GPIO_FN_SDHID1_0_PU, GPIO_FN_SDHID1_1_PU, GPIO_FN_SDHID1_2_PU, GPIO_FN_SDHID1_3_PU, GPIO_FN_SDHICMD1_PU, + GPIO_FN_SDHID2_0_PU, + GPIO_FN_SDHID2_1_PU, + GPIO_FN_SDHID2_2_PU, + GPIO_FN_SDHID2_3_PU, + GPIO_FN_SDHICMD2_PU, GPIO_FN_MMCCMD0_PU, GPIO_FN_MMCCMD1_PU, GPIO_FN_FSIACK_PU, @@ -463,6 +475,7 @@ enum { GPIO_FN_FSIAIBT_PU, GPIO_FN_FSIAISLD_PU, }; + /* DMA slave IDs */ enum { SHDMA_SLAVE_INVALID, diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c index 3eed44eb98b4..a26d9059036b 100644 --- a/arch/arm/mach-shmobile/pfc-sh73a0.c +++ b/arch/arm/mach-shmobile/pfc-sh73a0.c @@ -488,13 +488,26 @@ enum { KEYIN5_PU_MARK, KEYIN6_PU_MARK, KEYIN7_PU_MARK, + SDHICD0_PU_MARK, + SDHID0_0_PU_MARK, + SDHID0_1_PU_MARK, + SDHID0_2_PU_MARK, + SDHID0_3_PU_MARK, + SDHICMD0_PU_MARK, + SDHIWP0_PU_MARK, SDHID1_0_PU_MARK, SDHID1_1_PU_MARK, SDHID1_2_PU_MARK, SDHID1_3_PU_MARK, SDHICMD1_PU_MARK, + SDHID2_0_PU_MARK, + SDHID2_1_PU_MARK, + SDHID2_2_PU_MARK, + SDHID2_3_PU_MARK, + SDHICMD2_PU_MARK, MMCCMD0_PU_MARK, MMCCMD1_PU_MARK, + FSIBISLD_PU_MARK, FSIACK_PU_MARK, FSIAILR_PU_MARK, FSIAIBT_PU_MARK, @@ -1387,19 +1400,28 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3), PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1), PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, MSEL4CR_MSEL15_0), \ + PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU, + MSEL4CR_MSEL15_0), \ PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3), - PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, MSEL4CR_MSEL15_0), \ + PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU, + MSEL4CR_MSEL15_0), \ PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3), - PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, MSEL4CR_MSEL15_0), \ + PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU, + MSEL4CR_MSEL15_0), \ PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3), - PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, MSEL4CR_MSEL15_0), \ + PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU, + MSEL4CR_MSEL15_0), \ PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3), - PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU, + MSEL4CR_MSEL15_0), PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \ PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2), PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1), @@ -1516,16 +1538,29 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU), PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU), - PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_IN_PU, PORT259_FN1), - PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_IN_PU, PORT260_FN1), - PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_IN_PU, PORT261_FN1), - PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_IN_PU, PORT262_FN1), - PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_IN_PU, PORT263_FN1), + PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU), + PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU), + PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU), + PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU), + PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU), + PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU), + PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU), + PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU), + PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU), + PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU), + PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU), + PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU), + PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU), + PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU), + PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU), + PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU), + PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU), PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT279_IN_PU, + PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU, MSEL4CR_MSEL15_1), + PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU), PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU), PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU), PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU), @@ -2181,11 +2216,23 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(KEYIN5_PU), GPIO_FN(KEYIN6_PU), GPIO_FN(KEYIN7_PU), + GPIO_FN(SDHICD0_PU), + GPIO_FN(SDHID0_0_PU), + GPIO_FN(SDHID0_1_PU), + GPIO_FN(SDHID0_2_PU), + GPIO_FN(SDHID0_3_PU), + GPIO_FN(SDHICMD0_PU), + GPIO_FN(SDHIWP0_PU), GPIO_FN(SDHID1_0_PU), GPIO_FN(SDHID1_1_PU), GPIO_FN(SDHID1_2_PU), GPIO_FN(SDHID1_3_PU), GPIO_FN(SDHICMD1_PU), + GPIO_FN(SDHID2_0_PU), + GPIO_FN(SDHID2_1_PU), + GPIO_FN(SDHID2_2_PU), + GPIO_FN(SDHID2_3_PU), + GPIO_FN(SDHICMD2_PU), GPIO_FN(MMCCMD0_PU), GPIO_FN(MMCCMD1_PU), GPIO_FN(FSIACK_PU), -- cgit v1.2.1 From 28626632d83696ab3c8f2b9d5d8a658a1787551f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 05:44:07 +0000 Subject: ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support Kota2 base board support including the on-chip SCIFA2 serial console and the on-board SMSC911X ethernet port. The s73a0 SMP bits are also updated to include Kota2. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/Kconfig | 7 ++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/board-kota2.c | 168 +++++++++++++++++++++++++++++++++++ arch/arm/mach-shmobile/platsmp.c | 10 ++- 4 files changed, 182 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-shmobile/board-kota2.c (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0c8f6cf3e948..c1b45342e1fb 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -69,6 +69,11 @@ config MACH_MACKEREL depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB +config MACH_KOTA2 + bool "KOTA2 board" + select ARCH_REQUIRE_GPIOLIB + depends on ARCH_SH73A0 + comment "SH-Mobile System Configuration" menu "Memory configuration" @@ -78,6 +83,7 @@ config MEMORY_START default "0x50000000" if MACH_G3EVM default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ MACH_MACKEREL + default "0x41000000" if MACH_KOTA2 default "0x00000000" ---help--- Tweak this only when porting to a new machine which does not @@ -89,6 +95,7 @@ config MEMORY_SIZE default "0x08000000" if MACH_G3EVM default "0x08000000" if MACH_G4EVM default "0x20000000" if MACH_AG5EVM + default "0x1e000000" if MACH_KOTA2 default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL default "0x04000000" help diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 612b27000c3e..2aec2f732515 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o +obj-$(CONFIG_MACH_KOTA2) += board-kota2.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c new file mode 100644 index 000000000000..4ab05e855077 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -0,0 +1,168 @@ +/* + * kota2 board support + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2010 Takashi Yoshii + * Copyright (C) 2009 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource smsc9220_resources[] = { + [0] = { + .start = 0x14000000, /* CS5A */ + .end = 0x140000ff, /* A1->A7 */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(33), /* PINTA2 @ PORT144 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc9220_platdata = { + .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */ + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device eth_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc9220_platdata, + }, + .resource = smsc9220_resources, + .num_resources = ARRAY_SIZE(smsc9220_resources), +}; + +static struct platform_device *kota2_devices[] __initdata = { + ð_device, +}; + +static struct map_desc kota2_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +static void __init kota2_map_io(void) +{ + iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc)); + + /* setup early devices and console here as well */ + sh73a0_add_early_devices(); + shmobile_setup_console(); +} + +#define PINTER0A 0xe69000a0 +#define PINTCR0A 0xe69000b0 + +void __init kota2_init_irq(void) +{ + sh73a0_init_irq(); + + /* setup PINT: enable PINTA2 as active low */ + __raw_writel(1 << 29, PINTER0A); + __raw_writew(2 << 10, PINTCR0A); +} + +static void __init kota2_init(void) +{ + sh73a0_pinmux_init(); + + /* SCIFA2 (UART2) */ + gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); + gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); + gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL); + gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL); + + /* SMSC911X */ + gpio_request(GPIO_FN_D0_NAF0, NULL); + gpio_request(GPIO_FN_D1_NAF1, NULL); + gpio_request(GPIO_FN_D2_NAF2, NULL); + gpio_request(GPIO_FN_D3_NAF3, NULL); + gpio_request(GPIO_FN_D4_NAF4, NULL); + gpio_request(GPIO_FN_D5_NAF5, NULL); + gpio_request(GPIO_FN_D6_NAF6, NULL); + gpio_request(GPIO_FN_D7_NAF7, NULL); + gpio_request(GPIO_FN_D8_NAF8, NULL); + gpio_request(GPIO_FN_D9_NAF9, NULL); + gpio_request(GPIO_FN_D10_NAF10, NULL); + gpio_request(GPIO_FN_D11_NAF11, NULL); + gpio_request(GPIO_FN_D12_NAF12, NULL); + gpio_request(GPIO_FN_D13_NAF13, NULL); + gpio_request(GPIO_FN_D14_NAF14, NULL); + gpio_request(GPIO_FN_D15_NAF15, NULL); + gpio_request(GPIO_FN_CS5A_, NULL); + gpio_request(GPIO_FN_WE0__FWE, NULL); + gpio_request(GPIO_PORT144, NULL); /* PINTA2 */ + gpio_direction_input(GPIO_PORT144); + gpio_request(GPIO_PORT145, NULL); /* RESET */ + gpio_direction_output(GPIO_PORT145, 1); + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*8way */ + l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff); +#endif + sh73a0_add_standard_devices(); + platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices)); +} + +static void __init kota2_timer_init(void) +{ + sh73a0_clock_init(); + shmobile_timer.init(); + return; +} + +struct sys_timer kota2_timer = { + .init = kota2_timer_init, +}; + +MACHINE_START(KOTA2, "kota2") + .map_io = kota2_map_io, + .init_irq = kota2_init_irq, + .handle_irq = shmobile_handle_irq_gic, + .init_machine = kota2_init, + .timer = &kota2_timer, +MACHINE_END diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 66f980625a33..ccd81dac42f8 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -21,9 +21,11 @@ #include #include +#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2()) + static unsigned int __init shmobile_smp_get_core_count(void) { - if (machine_is_ag5evm()) + if (is_sh73a0()) return sh73a0_get_core_count(); return 1; @@ -31,7 +33,7 @@ static unsigned int __init shmobile_smp_get_core_count(void) static void __init shmobile_smp_prepare_cpus(void) { - if (machine_is_ag5evm()) + if (is_sh73a0()) sh73a0_smp_prepare_cpus(); } @@ -39,13 +41,13 @@ void __cpuinit platform_secondary_init(unsigned int cpu) { trace_hardirqs_off(); - if (machine_is_ag5evm()) + if (is_sh73a0()) sh73a0_secondary_init(cpu); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { - if (machine_is_ag5evm()) + if (is_sh73a0()) return sh73a0_boot_secondary(cpu); return -ENOSYS; -- cgit v1.2.1 From ef4f994ae11c0a587e2554b1a6b8b0e1dfa07c4e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 05:44:16 +0000 Subject: ARM: mach-shmobile: Kota2 KEYSC support This patch adds KEYSC support to the Kota2 board. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 65 ++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 4ab05e855077..8a6b85a52cb7 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -29,6 +29,8 @@ #include #include #include +#include +#include #include #include #include @@ -69,8 +71,52 @@ static struct platform_device eth_device = { .num_resources = ARRAY_SIZE(smsc9220_resources), }; +static struct sh_keysc_info keysc_platdata = { + .mode = SH_KEYSC_MODE_6, + .scan_timing = 3, + .delay = 100, + .keycodes = { + KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND, + 0, 0, 0, 0, 0, + KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9, + 0, KEY_DOWN, 0, 0, 0, + KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6, + KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0, + KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3, + 0, KEY_UP, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + }, +}; + +static struct resource keysc_resources[] = { + [0] = { + .name = "KEYSC", + .start = 0xe61b0000, + .end = 0xe61b0098 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(71), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device keysc_device = { + .name = "sh_keysc", + .id = 0, + .num_resources = ARRAY_SIZE(keysc_resources), + .resource = keysc_resources, + .dev = { + .platform_data = &keysc_platdata, + }, +}; + static struct platform_device *kota2_devices[] __initdata = { ð_device, + &keysc_device, }; static struct map_desc kota2_io_desc[] __initdata = { @@ -140,6 +186,25 @@ static void __init kota2_init(void) gpio_request(GPIO_PORT145, NULL); /* RESET */ gpio_direction_output(GPIO_PORT145, 1); + /* KEYSC */ + gpio_request(GPIO_FN_KEYIN0_PU, NULL); + gpio_request(GPIO_FN_KEYIN1_PU, NULL); + gpio_request(GPIO_FN_KEYIN2_PU, NULL); + gpio_request(GPIO_FN_KEYIN3_PU, NULL); + gpio_request(GPIO_FN_KEYIN4_PU, NULL); + gpio_request(GPIO_FN_KEYIN5_PU, NULL); + gpio_request(GPIO_FN_KEYIN6_PU, NULL); + gpio_request(GPIO_FN_KEYIN7_PU, NULL); + gpio_request(GPIO_FN_KEYOUT0, NULL); + gpio_request(GPIO_FN_KEYOUT1, NULL); + gpio_request(GPIO_FN_KEYOUT2, NULL); + gpio_request(GPIO_FN_KEYOUT3, NULL); + gpio_request(GPIO_FN_KEYOUT4, NULL); + gpio_request(GPIO_FN_KEYOUT5, NULL); + gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL); + gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL); + gpio_request(GPIO_FN_KEYOUT8, NULL); + #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff); -- cgit v1.2.1 From 6b7c0ea21226972e08ebb71e134fbebdf7459d1a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 05:44:25 +0000 Subject: ARM: mach-shmobile: Kota2 GPIO Keys support This patch ties in GPIO Keys support on the Kota2 board. For now the keys are used in polling mode, but after extending the sh73a0 PFC with IRQ support we should be able to switch to the IRQ driven driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 8a6b85a52cb7..849423cddca9 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -114,9 +115,40 @@ static struct platform_device keysc_device = { }, }; +#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } + +static struct gpio_keys_button gpio_buttons[] = { + GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */ + GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */ + GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */ + GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */ + GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */ + GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */ + GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */ + GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */ + /* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */ + GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */ + /* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */ +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), + .poll_interval = 250, /* polled for now */ +}; + +static struct platform_device gpio_keys_device = { + .name = "gpio-keys-polled", /* polled for now */ + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + static struct platform_device *kota2_devices[] __initdata = { ð_device, &keysc_device, + &gpio_keys_device, }; static struct map_desc kota2_io_desc[] __initdata = { -- cgit v1.2.1 From ae6e70831805c1d3bb4cdb87a29877b9846d3c15 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 05:44:33 +0000 Subject: ARM: mach-shmobile: Kota2 GPIO LEDs support This patch ties in GPIO LEDs support on the Kota2 board. For now all LEDs are driven by the GPIO LED driver, but in the not so distant future the LEDs hooked up to TPU pin functions will be moved over to the recently posted LED TPU driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 849423cddca9..d46bd9f7cea5 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -145,10 +146,36 @@ static struct platform_device gpio_keys_device = { }, }; +#define GPIO_LED(n, g) { .name = n, .gpio = g } + +static struct gpio_led gpio_leds[] = { + GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */ + GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */ + GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */ + GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */ + GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */ + GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */ + GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */ +}; + +static struct gpio_led_platform_data gpio_leds_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device gpio_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_leds_info, + }, +}; + static struct platform_device *kota2_devices[] __initdata = { ð_device, &keysc_device, &gpio_keys_device, + &gpio_leds_device, }; static struct map_desc kota2_io_desc[] __initdata = { -- cgit v1.2.1 From 4e9279452502c043469cf34cd813db83ae87c7d3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 05:44:42 +0000 Subject: ARM: mach-shmobile: Kota2 MMCIF support Add support for sh73a0 MMCIF hardware block on the Kota2 board. A non-removable eMMC chip is used with 8 data bits on the MMC bus. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 49 ++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index d46bd9f7cea5..e1380df01315 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -33,6 +33,8 @@ #include #include #include +#include +#include #include #include #include @@ -171,11 +173,44 @@ static struct platform_device gpio_leds_device = { }, }; +static struct resource mmcif_resources[] = { + [0] = { + .name = "MMCIF", + .start = 0xe6bd0000, + .end = 0xe6bd00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(140), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = gic_spi(141), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data mmcif_info = { + .ocr = MMC_VDD_165_195, + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, +}; + +static struct platform_device mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .platform_data = &mmcif_info, + }, + .num_resources = ARRAY_SIZE(mmcif_resources), + .resource = mmcif_resources, +}; + static struct platform_device *kota2_devices[] __initdata = { ð_device, &keysc_device, &gpio_keys_device, &gpio_leds_device, + &mmcif_device, }; static struct map_desc kota2_io_desc[] __initdata = { @@ -264,6 +299,20 @@ static void __init kota2_init(void) gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL); gpio_request(GPIO_FN_KEYOUT8, NULL); + /* MMCIF */ + gpio_request(GPIO_FN_MMCCLK0, NULL); + gpio_request(GPIO_FN_MMCD0_0, NULL); + gpio_request(GPIO_FN_MMCD0_1, NULL); + gpio_request(GPIO_FN_MMCD0_2, NULL); + gpio_request(GPIO_FN_MMCD0_3, NULL); + gpio_request(GPIO_FN_MMCD0_4, NULL); + gpio_request(GPIO_FN_MMCD0_5, NULL); + gpio_request(GPIO_FN_MMCD0_6, NULL); + gpio_request(GPIO_FN_MMCD0_7, NULL); + gpio_request(GPIO_FN_MMCCMD0, NULL); + gpio_request(GPIO_PORT208, NULL); /* Reset */ + gpio_direction_output(GPIO_PORT208, 1); + #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff); -- cgit v1.2.1 From 9e9a892417317c3c7fc98f9a87f51c0e7b013b36 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 05:44:51 +0000 Subject: ARM: mach-shmobile: Kota2 SCIFA4 and SCIFB support Add SCIFA4 and SCIFB support to the Kota2 board. Only pins are configured since the SCIF platform devices are already present in the sh73a0 code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index e1380df01315..0dbee59bc6d9 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -256,6 +256,12 @@ static void __init kota2_init(void) gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL); gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL); + /* SCIFA4 (UART1) */ + gpio_request(GPIO_FN_SCIFA4_TXD, NULL); + gpio_request(GPIO_FN_SCIFA4_RXD, NULL); + gpio_request(GPIO_FN_SCIFA4_RTS_, NULL); + gpio_request(GPIO_FN_SCIFA4_CTS_, NULL); + /* SMSC911X */ gpio_request(GPIO_FN_D0_NAF0, NULL); gpio_request(GPIO_FN_D1_NAF1, NULL); @@ -313,6 +319,13 @@ static void __init kota2_init(void) gpio_request(GPIO_PORT208, NULL); /* Reset */ gpio_direction_output(GPIO_PORT208, 1); + /* SCIFB (BT) */ + gpio_request(GPIO_FN_PORT159_SCIFB_SCK, NULL); + gpio_request(GPIO_FN_PORT160_SCIFB_TXD, NULL); + gpio_request(GPIO_FN_PORT161_SCIFB_CTS_, NULL); + gpio_request(GPIO_FN_PORT162_SCIFB_RXD, NULL); + gpio_request(GPIO_FN_PORT163_SCIFB_RTS_, NULL); + #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff); -- cgit v1.2.1 From 8722c996d61948a57ada840350b0383f6879bcaa Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 18 Aug 2011 05:45:00 +0000 Subject: ARM: mach-shmobile: Kota2 SDHI0 and SDHI1 support Add SDHI0 and SDHI1 support to the Kota2 board. SDHI0 is hooked up to a microSD card slot and SDHI1 to a wireless module that also connects to SCIFB. This depends on the recently merged code for TMIO_MMC_HAS_IDLE_WAIT together with PFC support for pull-ups on SDHI0 and SDHI1. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 93 ++++++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 0dbee59bc6d9..adc73122bf20 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -35,6 +35,8 @@ #include #include #include +#include +#include #include #include #include @@ -205,12 +207,86 @@ static struct platform_device mmcif_device = { .resource = mmcif_resources, }; +static struct sh_mobile_sdhi_info sdhi0_info = { + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xee100000, + .end = 0xee1000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(83), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = gic_spi(84), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = gic_spi(85), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .id = 0, + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .dev = { + .platform_data = &sdhi0_info, + }, +}; + +static struct sh_mobile_sdhi_info sdhi1_info = { + .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xee120000, + .end = 0xee1200ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(87), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = gic_spi(88), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = gic_spi(89), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .id = 1, + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .dev = { + .platform_data = &sdhi1_info, + }, +}; + static struct platform_device *kota2_devices[] __initdata = { ð_device, &keysc_device, &gpio_keys_device, &gpio_leds_device, &mmcif_device, + &sdhi0_device, + &sdhi1_device, }; static struct map_desc kota2_io_desc[] __initdata = { @@ -319,6 +395,15 @@ static void __init kota2_init(void) gpio_request(GPIO_PORT208, NULL); /* Reset */ gpio_direction_output(GPIO_PORT208, 1); + /* SDHI0 (microSD) */ + gpio_request(GPIO_FN_SDHICD0_PU, NULL); + gpio_request(GPIO_FN_SDHICMD0_PU, NULL); + gpio_request(GPIO_FN_SDHICLK0, NULL); + gpio_request(GPIO_FN_SDHID0_3_PU, NULL); + gpio_request(GPIO_FN_SDHID0_2_PU, NULL); + gpio_request(GPIO_FN_SDHID0_1_PU, NULL); + gpio_request(GPIO_FN_SDHID0_0_PU, NULL); + /* SCIFB (BT) */ gpio_request(GPIO_FN_PORT159_SCIFB_SCK, NULL); gpio_request(GPIO_FN_PORT160_SCIFB_TXD, NULL); @@ -326,6 +411,14 @@ static void __init kota2_init(void) gpio_request(GPIO_FN_PORT162_SCIFB_RXD, NULL); gpio_request(GPIO_FN_PORT163_SCIFB_RTS_, NULL); + /* SDHI1 (BCM4330) */ + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHICMD1_PU, NULL); + gpio_request(GPIO_FN_SDHID1_3_PU, NULL); + gpio_request(GPIO_FN_SDHID1_2_PU, NULL); + gpio_request(GPIO_FN_SDHID1_1_PU, NULL); + gpio_request(GPIO_FN_SDHID1_0_PU, NULL); + #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff); -- cgit v1.2.1 From d6e15eefcb334deac3e877fce80ace3b91b0ab69 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Oct 2011 16:21:00 +0900 Subject: ARM: mach-shmobile: Break out INTC IRQ code Add INTC_IRQ_PINS_16() and INTC_IRQ_PINS_32() to mach/intc.h. These macros define 16 or 32 external IRQ pins on a certain memory base address. Can be used with INTCA or INTCS. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/intc.h | 195 +++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 arch/arm/mach-shmobile/include/mach/intc.h (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h new file mode 100644 index 000000000000..1cd8b36678ee --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/intc.h @@ -0,0 +1,195 @@ +#ifndef __ASM_MACH_INTC_H +#define __ASM_MACH_INTC_H +#include + +#define INTC_IRQ_PINS_ENUM_16L(p) \ + p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ + p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \ + p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ + p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 + +#define INTC_IRQ_PINS_ENUM_16H(p) \ + p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ + p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \ + p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ + p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 + +#define INTC_IRQ_PINS_VECT_16L(p, vect) \ + vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \ + vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \ + vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \ + vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \ + vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \ + vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \ + vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \ + vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0) + +#define INTC_IRQ_PINS_VECT_16H(p, vect) \ + vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \ + vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \ + vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \ + vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \ + vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \ + vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \ + vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \ + vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0) + +#define INTC_IRQ_PINS_MASK_16L(p, base) \ + { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \ + { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ + p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ + { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \ + { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ + p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } + +#define INTC_IRQ_PINS_MASK_16H(p, base) \ + { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \ + { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ + p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ + { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \ + { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ + p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } + +#define INTC_IRQ_PINS_PRIO_16L(p, base) \ + { base + 0x10, 0, 32, 4, /* INTPRI00A */ \ + { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ + p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ + { base + 0x14, 0, 32, 4, /* INTPRI10A */ \ + { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ + p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } + +#define INTC_IRQ_PINS_PRIO_16H(p, base) \ + { base + 0x18, 0, 32, 4, /* INTPRI20A */ \ + { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ + p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ + { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \ + { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ + p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } + +#define INTC_IRQ_PINS_SENSE_16L(p, base) \ + { base + 0x00, 32, 4, /* ICR1A */ \ + { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ + p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ + { base + 0x04, 32, 4, /* ICR2A */ \ + { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ + p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } + +#define INTC_IRQ_PINS_SENSE_16H(p, base) \ + { base + 0x08, 32, 4, /* ICR3A */ \ + { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ + p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ + { base + 0x0c, 32, 4, /* ICR4A */ \ + { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ + p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } + +#define INTC_IRQ_PINS_ACK_16L(p, base) \ + { base + 0x20, 0, 8, /* INTREQ00A */ \ + { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ + p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ + { base + 0x24, 0, 8, /* INTREQ10A */ \ + { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ + p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } + +#define INTC_IRQ_PINS_ACK_16H(p, base) \ + { base + 0x28, 0, 8, /* INTREQ20A */ \ + { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ + p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ + { base + 0x2c, 0, 8, /* INTREQ30A */ \ + { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ + p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } + +#define INTC_IRQ_PINS_16(p, base, vect, str) \ + \ +static struct resource p ## _resources[] __initdata = { \ + [0] = { \ + .start = base, \ + .end = base + 0x64, \ + .flags = IORESOURCE_MEM, \ + }, \ +}; \ + \ +enum { \ + p ## _UNUSED = 0, \ + INTC_IRQ_PINS_ENUM_16L(p), \ +}; \ + \ +static struct intc_vect p ## _vectors[] __initdata = { \ + INTC_IRQ_PINS_VECT_16L(p, vect), \ +}; \ + \ +static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ + INTC_IRQ_PINS_MASK_16L(p, base), \ +}; \ + \ +static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ + INTC_IRQ_PINS_PRIO_16L(p, base), \ +}; \ + \ +static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ + INTC_IRQ_PINS_SENSE_16L(p, base), \ +}; \ + \ +static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ + INTC_IRQ_PINS_ACK_16L(p, base), \ +}; \ + \ +static struct intc_desc p ## _desc __initdata = { \ + .name = str, \ + .resource = p ## _resources, \ + .num_resources = ARRAY_SIZE(p ## _resources), \ + .hw = INTC_HW_DESC(p ## _vectors, NULL, \ + p ## _mask_registers, p ## _prio_registers, \ + p ## _sense_registers, p ## _ack_registers) \ +} + +#define INTC_IRQ_PINS_32(p, base, vect, str) \ + \ +static struct resource p ## _resources[] __initdata = { \ + [0] = { \ + .start = base, \ + .end = base + 0x6c, \ + .flags = IORESOURCE_MEM, \ + }, \ +}; \ + \ +enum { \ + p ## _UNUSED = 0, \ + INTC_IRQ_PINS_ENUM_16L(p), \ + INTC_IRQ_PINS_ENUM_16H(p), \ +}; \ + \ +static struct intc_vect p ## _vectors[] __initdata = { \ + INTC_IRQ_PINS_VECT_16L(p, vect), \ + INTC_IRQ_PINS_VECT_16H(p, vect), \ +}; \ + \ +static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ + INTC_IRQ_PINS_MASK_16L(p, base), \ + INTC_IRQ_PINS_MASK_16H(p, base), \ +}; \ + \ +static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ + INTC_IRQ_PINS_PRIO_16L(p, base), \ + INTC_IRQ_PINS_PRIO_16H(p, base), \ +}; \ + \ +static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ + INTC_IRQ_PINS_SENSE_16L(p, base), \ + INTC_IRQ_PINS_SENSE_16H(p, base), \ +}; \ + \ +static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ + INTC_IRQ_PINS_ACK_16L(p, base), \ + INTC_IRQ_PINS_ACK_16H(p, base), \ +}; \ + \ +static struct intc_desc p ## _desc __initdata = { \ + .name = str, \ + .resource = p ## _resources, \ + .num_resources = ARRAY_SIZE(p ## _resources), \ + .hw = INTC_HW_DESC(p ## _vectors, NULL, \ + p ## _mask_registers, p ## _prio_registers, \ + p ## _sense_registers, p ## _ack_registers) \ +} + +#endif /* __ASM_MACH_INTC_H */ -- cgit v1.2.1 From 487881c09b3a34735b0d1c71666703b8f0f10d8f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 27 Sep 2011 18:29:31 +0900 Subject: ARM: mach-shmobile: sh7372 Mackerel NOR Flash USB boot fix Always use CS0 shadow area for NOR flash instead of regular CS0 memory area on Mackerel. When booting from CS0 NOR Flash the regular CS0 memory area is available, but when booting via USB the MASK ROM gets mapped to 0x0 which gets in the way for the NOR Flash. Always using CS0 shadow area works well for both NOR Flash boot and USB boot. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 3689ad2e9156..6c621c2ce0bc 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -273,8 +273,8 @@ static struct physmap_flash_data nor_flash_data = { static struct resource nor_flash_resources[] = { [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, + .start = 0x20000000, /* CS0 shadow instead of regular CS0 */ + .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */ .flags = IORESOURCE_MEM, } }; -- cgit v1.2.1 From 832217daec1aa8683c037e8e0e0b910ea24fbca5 Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Tue, 27 Sep 2011 13:23:04 +0200 Subject: ARM: sh7372 ap4evb NOR Flash USB boot fix Always use CS0 shadow area for NOR flash instead of regular CS0 memory area on ap4evb. When booting from CS0 NOR Flash the regular CS0 memory area is available, but when booting via USB the MASK ROM gets mapped to 0x0 which gets in the way for the NOR Flash. Always using CS0 shadow area works well for both NOR Flash boot and USB boot. Signed-off-by: Bastian Hecht Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 5b7edadf4647..7283d6913fbf 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -200,8 +200,8 @@ static struct physmap_flash_data nor_flash_data = { static struct resource nor_flash_resources[] = { [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, + .start = 0x20000000, /* CS0 shadow instead of regular CS0 */ + .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */ .flags = IORESOURCE_MEM, } }; -- cgit v1.2.1 From 13fc7e7c2cd08a884f76eeb940957160b296d5c3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 28 Sep 2011 16:55:45 +0900 Subject: ARM: mach-shmobile: sh73a0 GPIO IRQ support This patch adds support for sh73a0 GPIO IRQs by making use of the PFC GPIO IRQ feature. Only IRQ pins are supported at this time. In the future when PINT interrupts also are supported properly we can easily extend the table with such information. Also, the sh73a0 is currently making use of the GIC for external interrupt which is rather unflexible when it comes to triggering configuration at this point. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/pfc-sh73a0.c | 41 +++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c index a26d9059036b..57322c9fd9b6 100644 --- a/arch/arm/mach-shmobile/pfc-sh73a0.c +++ b/arch/arm/mach-shmobile/pfc-sh73a0.c @@ -22,6 +22,7 @@ #include #include #include +#include #define _1(fn, pfx, sfx) fn(pfx, sfx) @@ -2765,6 +2766,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ(n) gic_spi((n) + 1) /* GIC SPI starting from 1 for IRQ0 */ + +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ(19), PORT9_FN0), + PINMUX_IRQ(EXT_IRQ(1), PORT10_FN0), + PINMUX_IRQ(EXT_IRQ(0), PORT11_FN0), + PINMUX_IRQ(EXT_IRQ(18), PORT13_FN0), + PINMUX_IRQ(EXT_IRQ(20), PORT14_FN0), + PINMUX_IRQ(EXT_IRQ(21), PORT15_FN0), + PINMUX_IRQ(EXT_IRQ(31), PORT26_FN0), + PINMUX_IRQ(EXT_IRQ(30), PORT27_FN0), + PINMUX_IRQ(EXT_IRQ(29), PORT28_FN0), + PINMUX_IRQ(EXT_IRQ(22), PORT40_FN0), + PINMUX_IRQ(EXT_IRQ(23), PORT53_FN0), + PINMUX_IRQ(EXT_IRQ(10), PORT54_FN0), + PINMUX_IRQ(EXT_IRQ(9), PORT56_FN0), + PINMUX_IRQ(EXT_IRQ(26), PORT115_FN0), + PINMUX_IRQ(EXT_IRQ(27), PORT116_FN0), + PINMUX_IRQ(EXT_IRQ(28), PORT117_FN0), + PINMUX_IRQ(EXT_IRQ(24), PORT118_FN0), + PINMUX_IRQ(EXT_IRQ(6), PORT147_FN0), + PINMUX_IRQ(EXT_IRQ(2), PORT149_FN0), + PINMUX_IRQ(EXT_IRQ(7), PORT150_FN0), + PINMUX_IRQ(EXT_IRQ(12), PORT156_FN0), + PINMUX_IRQ(EXT_IRQ(4), PORT159_FN0), + PINMUX_IRQ(EXT_IRQ(25), PORT164_FN0), + PINMUX_IRQ(EXT_IRQ(8), PORT223_FN0), + PINMUX_IRQ(EXT_IRQ(3), PORT224_FN0), + PINMUX_IRQ(EXT_IRQ(5), PORT227_FN0), + PINMUX_IRQ(EXT_IRQ(17), PORT234_FN0), + PINMUX_IRQ(EXT_IRQ(11), PORT238_FN0), + PINMUX_IRQ(EXT_IRQ(13), PORT239_FN0), + PINMUX_IRQ(EXT_IRQ(16), PORT249_FN0), + PINMUX_IRQ(EXT_IRQ(14), PORT251_FN0), + PINMUX_IRQ(EXT_IRQ(9), PORT308_FN0), +}; + static struct pinmux_info sh73a0_pinmux_info = { .name = "sh73a0_pfc", .reserved_id = PINMUX_RESERVED, @@ -2785,6 +2823,9 @@ static struct pinmux_info sh73a0_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh73a0_pinmux_init(void) -- cgit v1.2.1 From e753068093c4c4da80771bd5ee53a6a782dee7b6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Oct 2011 16:21:16 +0900 Subject: ARM: mach-shmobile: Use common INTC IRQ code on sh7367 Make use of INTC_IRQ_PINS_16() for INTCA on sh7367. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh7367.c | 40 ++++++------------------------------ 1 file changed, 6 insertions(+), 34 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c index cc442d198cdc..cfde9bfc3669 100644 --- a/arch/arm/mach-shmobile/intc-sh7367.c +++ b/arch/arm/mach-shmobile/intc-sh7367.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -31,8 +32,6 @@ enum { DISABLED, /* interrupt sources INTCA */ - IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A, - IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A, DIRC, CRYPT1_ERR, CRYPT2_STD, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, @@ -76,14 +75,6 @@ enum { }; static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), - INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), - INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), - INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0), - INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320), - INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360), - INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0), - INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), INTC_VECT(DIRC, 0x0560), INTC_VECT(CRYPT1_ERR, 0x05e0), INTC_VECT(CRYPT2_STD, 0x0700), @@ -163,10 +154,6 @@ static struct intc_group intca_groups[] __initdata = { }; static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } }, @@ -212,11 +199,6 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = { }; static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6900010, 0, 32, 4, /* INTPRI00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900014, 0, 32, 4, /* INTPRI10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } }, { 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD, @@ -240,29 +222,18 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, }; -static struct intc_sense_reg intca_sense_registers[] __initdata = { - { 0xe6900000, 16, 2, /* ICR1A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900004, 16, 2, /* ICR2A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, -}; - -static struct intc_mask_reg intca_ack_registers[] __initdata = { - { 0xe6900020, 0, 8, /* INTREQ00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900024, 0, 8, /* INTREQ10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, -}; - static struct intc_desc intca_desc __initdata = { .name = "sh7367-intca", .force_enable = ENABLED, .force_disable = DISABLED, .hw = INTC_HW_DESC(intca_vectors, intca_groups, intca_mask_registers, intca_prio_registers, - intca_sense_registers, intca_ack_registers), + NULL, NULL), }; +INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000, + INTC_VECT, "sh7367-intca-irq-pins"); + enum { UNUSED_INTCS = 0, @@ -432,6 +403,7 @@ void __init sh7367_init_irq(void) void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); register_intc_controller(&intca_desc); + register_intc_controller(&intca_irq_pins_desc); register_intc_controller(&intcs_desc); /* demux using INTEVTSA */ -- cgit v1.2.1 From e1b3aa85b2887c06f59c9d38aa3653f797a867cb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Oct 2011 16:21:26 +0900 Subject: ARM: mach-shmobile: Use common INTC IRQ code on sh7377 Make use of INTC_IRQ_PINS_32() for INTCA on sh7377. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh7377.c | 67 ++++-------------------------------- 1 file changed, 6 insertions(+), 61 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c index fe45154ce660..2af4e6e9bc5b 100644 --- a/arch/arm/mach-shmobile/intc-sh7377.c +++ b/arch/arm/mach-shmobile/intc-sh7377.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -31,10 +32,6 @@ enum { DISABLED, /* interrupt sources INTCA */ - IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A, - IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A, - IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A, - IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A, DIRC, _2DG, CRYPT_STD, @@ -91,22 +88,6 @@ enum { }; static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), - INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), - INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), - INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0), - INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320), - INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360), - INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0), - INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), - INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220), - INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260), - INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0), - INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0), - INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320), - INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360), - INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0), - INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0), INTC_VECT(DIRC, 0x0560), INTC_VECT(_2DG, 0x05e0), INTC_VECT(CRYPT_STD, 0x0700), @@ -203,15 +184,6 @@ static struct intc_group intca_groups[] __initdata = { }; static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, @@ -273,15 +245,6 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = { }; static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6900010, 0, 32, 4, /* INTPRI00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900014, 0, 32, 4, /* INTPRI10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900018, 0, 32, 4, /* INTPRI10A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690001c, 0, 32, 4, /* INTPRI30A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, { 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD, @@ -315,37 +278,18 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } }, }; -static struct intc_sense_reg intca_sense_registers[] __initdata = { - { 0xe6900000, 16, 2, /* ICR1A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900004, 16, 2, /* ICR2A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900008, 16, 2, /* ICR3A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690000c, 16, 2, /* ICR4A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, -}; - -static struct intc_mask_reg intca_ack_registers[] __initdata = { - { 0xe6900020, 0, 8, /* INTREQ00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900024, 0, 8, /* INTREQ10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900028, 0, 8, /* INTREQ20A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690002c, 0, 8, /* INTREQ30A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, -}; - static struct intc_desc intca_desc __initdata = { .name = "sh7377-intca", .force_enable = ENABLED, .force_disable = DISABLED, .hw = INTC_HW_DESC(intca_vectors, intca_groups, intca_mask_registers, intca_prio_registers, - intca_sense_registers, intca_ack_registers), + NULL, NULL), }; +INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, + INTC_VECT, "sh7377-intca-irq-pins"); + /* this macro ignore entry which is also in INTCA */ #define __IGNORE(a...) #define __IGNORE0(a...) 0 @@ -638,6 +582,7 @@ void __init sh7377_init_irq(void) void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE); register_intc_controller(&intca_desc); + register_intc_controller(&intca_irq_pins_desc); register_intc_controller(&intcs_desc); /* demux using INTEVTSA */ -- cgit v1.2.1 From da5713ef03aba15761eeeade4f4938e5db98b1e2 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Oct 2011 16:21:34 +0900 Subject: ARM: mach-shmobile: Use common INTC IRQ code on sh7372 Make use of INTC_IRQ_PINS_32() for INTCA on sh7372. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh7372.c | 72 ++++-------------------------------- 1 file changed, 8 insertions(+), 64 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 29cdc0522d9c..2d8856df80e2 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -29,10 +30,6 @@ enum { UNUSED_INTCA = 0, /* interrupt sources INTCA */ - IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A, - IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A, - IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A, - IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A, DIRC, CRYPT_STD, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, @@ -86,22 +83,6 @@ enum { }; static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), - INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), - INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), - INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0), - INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320), - INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360), - INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0), - INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), - INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220), - INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260), - INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0), - INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0), - INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320), - INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360), - INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0), - INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0), INTC_VECT(DIRC, 0x0560), INTC_VECT(CRYPT_STD, 0x0700), INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), @@ -203,15 +184,6 @@ static struct intc_group intca_groups[] __initdata = { }; static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, @@ -282,15 +254,6 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = { }; static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6900010, 0, 32, 4, /* INTPRI00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900014, 0, 32, 4, /* INTPRI10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900018, 0, 32, 4, /* INTPRI20A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690001c, 0, 32, 4, /* INTPRI30A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } }, { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, { 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD, @@ -336,33 +299,13 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } }, }; -static struct intc_sense_reg intca_sense_registers[] __initdata = { - { 0xe6900000, 32, 4, /* ICR1A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900004, 32, 4, /* ICR2A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900008, 32, 4, /* ICR3A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690000c, 32, 4, /* ICR4A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, -}; - -static struct intc_mask_reg intca_ack_registers[] __initdata = { - { 0xe6900020, 0, 8, /* INTREQ00A */ - { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, - { 0xe6900024, 0, 8, /* INTREQ10A */ - { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, - { 0xe6900028, 0, 8, /* INTREQ20A */ - { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, - { 0xe690002c, 0, 8, /* INTREQ30A */ - { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, -}; - -static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca", - intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - intca_sense_registers, intca_ack_registers); +static DECLARE_INTC_DESC(intca_desc, "sh7372-intca", + intca_vectors, intca_groups, + intca_mask_registers, intca_prio_registers, + NULL); +INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, + INTC_VECT, "sh7372-intca-irq-pins"); enum { UNUSED_INTCS = 0, ENABLED_INTCS, @@ -618,6 +561,7 @@ void __init sh7372_init_irq(void) intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE); register_intc_controller(&intca_desc); + register_intc_controller(&intca_irq_pins_desc); register_intc_controller(&intcs_desc); /* demux using INTEVTSA */ -- cgit v1.2.1 From a1993055efcc14fd6d213b936d28a41ea52e1d3d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Oct 2011 16:21:42 +0900 Subject: ARM: mach-shmobile: Use common INTC IRQ code on sh73a0 Improve IRQ triggering support by making use of the macro INTC_IRQ_PINS_32() for INTCA on sh73a0. Unfortunately it is not as easy as just using the macro as-is, we need to do mask and unmaks in the GIC but configure other bits and ack in INTCA. Update GPIO IRQ mappings while at it. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh73a0.c | 122 +++++++++++++++++++++++++++++++++++ arch/arm/mach-shmobile/pfc-sh73a0.c | 68 +++++++++---------- 2 files changed, 157 insertions(+), 33 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index a911a60e7719..836e81557986 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -255,20 +256,141 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } +#define RELOC_BASE 0x1000 + +/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) + +INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, + INTCS_VECT_RELOC, "sh73a0-intca-irq-pins"); + +static int to_gic_irq(struct irq_data *data) +{ + unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE; + + if (vect >= 0x3200) + vect -= 0x3000; + else + vect -= 0x0200; + + return gic_spi((vect >> 5) + 1); +} + +static int to_intca_reloc_irq(struct irq_data *data) +{ + return data->irq + (RELOC_BASE >> 5); +} + +#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq)) +#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p) + +static void intca_gic_enable(struct irq_data *data) +{ + irq_cb(irq_unmask, to_intca_reloc_irq(data)); + irq_cb(irq_unmask, to_gic_irq(data)); +} + +static void intca_gic_disable(struct irq_data *data) +{ + irq_cb(irq_mask, to_gic_irq(data)); + irq_cb(irq_mask, to_intca_reloc_irq(data)); +} + +static void intca_gic_mask_ack(struct irq_data *data) +{ + irq_cb(irq_mask, to_gic_irq(data)); + irq_cb(irq_mask_ack, to_intca_reloc_irq(data)); +} + +static void intca_gic_eoi(struct irq_data *data) +{ + irq_cb(irq_eoi, to_gic_irq(data)); +} + +static int intca_gic_set_type(struct irq_data *data, unsigned int type) +{ + return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type); +} + +static int intca_gic_set_wake(struct irq_data *data, unsigned int on) +{ + return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on); +} + +#ifdef CONFIG_SMP +static int intca_gic_set_affinity(struct irq_data *data, + const struct cpumask *cpumask, + bool force) +{ + return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force); +} +#endif + +struct irq_chip intca_gic_irq_chip = { + .name = "INTCA-GIC", + .irq_mask = intca_gic_disable, + .irq_unmask = intca_gic_enable, + .irq_mask_ack = intca_gic_mask_ack, + .irq_eoi = intca_gic_eoi, + .irq_enable = intca_gic_enable, + .irq_disable = intca_gic_disable, + .irq_shutdown = intca_gic_disable, + .irq_set_type = intca_gic_set_type, + .irq_set_wake = intca_gic_set_wake, +#ifdef CONFIG_SMP + .irq_set_affinity = intca_gic_set_affinity, +#endif +}; + +static int to_intc_vect(int irq) +{ + unsigned int irq_pin = irq - gic_spi(1); + unsigned int offs; + + if (irq_pin < 16) + offs = 0x0200; + else + offs = 0x3000; + + return offs + (irq_pin << 5); +} + +static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id) +{ + generic_handle_irq(intcs_evt2irq(to_intc_vect(irq))); + return IRQ_HANDLED; +} + +static struct irqaction sh73a0_irq_pin_cascade[32]; + void __init sh73a0_init_irq(void) { void __iomem *gic_dist_base = __io(0xf0001000); void __iomem *gic_cpu_base = __io(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); + int k, n; gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); + register_intc_controller(&intca_irq_pins_desc); /* demux using INTEVTSA */ sh73a0_intcs_cascade.name = "INTCS cascade"; sh73a0_intcs_cascade.handler = sh73a0_intcs_demux; sh73a0_intcs_cascade.dev_id = intevtsa; setup_irq(gic_spi(50), &sh73a0_intcs_cascade); + + /* IRQ pins require special handling through INTCA and GIC */ + for (k = 0; k < 32; k++) { + sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade"; + sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux; + setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); + + n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, + handle_level_irq, "level"); + set_irq_flags(n, IRQF_VALID); /* yuck */ + } } diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c index 57322c9fd9b6..5abe02fbd6b9 100644 --- a/arch/arm/mach-shmobile/pfc-sh73a0.c +++ b/arch/arm/mach-shmobile/pfc-sh73a0.c @@ -2766,41 +2766,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; -#define EXT_IRQ(n) gic_spi((n) + 1) /* GIC SPI starting from 1 for IRQ0 */ +/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */ +#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5)) static struct pinmux_irq pinmux_irqs[] = { - PINMUX_IRQ(EXT_IRQ(19), PORT9_FN0), - PINMUX_IRQ(EXT_IRQ(1), PORT10_FN0), - PINMUX_IRQ(EXT_IRQ(0), PORT11_FN0), - PINMUX_IRQ(EXT_IRQ(18), PORT13_FN0), - PINMUX_IRQ(EXT_IRQ(20), PORT14_FN0), - PINMUX_IRQ(EXT_IRQ(21), PORT15_FN0), - PINMUX_IRQ(EXT_IRQ(31), PORT26_FN0), - PINMUX_IRQ(EXT_IRQ(30), PORT27_FN0), - PINMUX_IRQ(EXT_IRQ(29), PORT28_FN0), - PINMUX_IRQ(EXT_IRQ(22), PORT40_FN0), - PINMUX_IRQ(EXT_IRQ(23), PORT53_FN0), - PINMUX_IRQ(EXT_IRQ(10), PORT54_FN0), - PINMUX_IRQ(EXT_IRQ(9), PORT56_FN0), - PINMUX_IRQ(EXT_IRQ(26), PORT115_FN0), - PINMUX_IRQ(EXT_IRQ(27), PORT116_FN0), - PINMUX_IRQ(EXT_IRQ(28), PORT117_FN0), - PINMUX_IRQ(EXT_IRQ(24), PORT118_FN0), - PINMUX_IRQ(EXT_IRQ(6), PORT147_FN0), - PINMUX_IRQ(EXT_IRQ(2), PORT149_FN0), - PINMUX_IRQ(EXT_IRQ(7), PORT150_FN0), - PINMUX_IRQ(EXT_IRQ(12), PORT156_FN0), - PINMUX_IRQ(EXT_IRQ(4), PORT159_FN0), - PINMUX_IRQ(EXT_IRQ(25), PORT164_FN0), - PINMUX_IRQ(EXT_IRQ(8), PORT223_FN0), - PINMUX_IRQ(EXT_IRQ(3), PORT224_FN0), - PINMUX_IRQ(EXT_IRQ(5), PORT227_FN0), - PINMUX_IRQ(EXT_IRQ(17), PORT234_FN0), - PINMUX_IRQ(EXT_IRQ(11), PORT238_FN0), - PINMUX_IRQ(EXT_IRQ(13), PORT239_FN0), - PINMUX_IRQ(EXT_IRQ(16), PORT249_FN0), - PINMUX_IRQ(EXT_IRQ(14), PORT251_FN0), - PINMUX_IRQ(EXT_IRQ(9), PORT308_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0), + PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0), }; static struct pinmux_info sh73a0_pinmux_info = { -- cgit v1.2.1 From 3087b905c4050afeb1847fb0fcf89b3e09f6ffee Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Oct 2011 16:21:50 +0900 Subject: ARM: mach-shmobile: SDHI0 GPIO hotplug for AG5EVM Implement GPIO hotplugging via TMIO_MMC_HAS_COLD_CD for AG5EVM SDHI0. This is possible now when INTCA is used for IRQ triggering on sh73a0. Without INTCA IRQ support we are left with the GIC hardware block that does not support dealing with active low interrupt sources. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 475342bcc95c..d6e461710524 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -339,6 +339,18 @@ static struct platform_device mipidsi0_device = { }, }; +/* SDHI0 */ +static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg) +{ + struct device *dev = arg; + struct sh_mobile_sdhi_info *info = dev->platform_data; + struct tmio_mmc_data *pdata = info->pdata; + + tmio_mmc_cd_wakeup(pdata); + + return IRQ_HANDLED; +} + static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, @@ -570,6 +582,13 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "sdhi0 cd", &sdhi0_device.dev)) + sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; + else + pr_warn("Unable to setup SDHI0 GPIO IRQ\n"); + /* enable SDHI1 on CN4 [WLAN I/F] */ gpio_request(GPIO_FN_SDHICLK1, NULL); gpio_request(GPIO_FN_SDHICMD1_PU, NULL); -- cgit v1.2.1 From 91c088ae17c62f7741d9563e36935bc7a69a7e9e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 17 Oct 2011 18:00:35 +0900 Subject: ARM: mach-shmobile: Add support for PINT though INTC macros Add a INTC_PINT() macro with various helper bits to allow SoCs like sh73a0 to suppor the PINT hardware using regular INTC tables. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/intc.h | 51 ++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h index 1cd8b36678ee..8b22258c8caa 100644 --- a/arch/arm/mach-shmobile/include/mach/intc.h +++ b/arch/arm/mach-shmobile/include/mach/intc.h @@ -192,4 +192,55 @@ static struct intc_desc p ## _desc __initdata = { \ p ## _sense_registers, p ## _ack_registers) \ } +#define INTC_PINT_E_EMPTY +#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0, +#define INTC_PINT_E(p) \ + PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \ + PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7, + +#define INTC_PINT_V_NONE +#define INTC_PINT_V(p, vect) \ + vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \ + vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \ + vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \ + vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7), + +#define INTC_PINT(p, mask_reg, sense_base, str, \ + enums_1, enums_2, enums_3, enums_4, \ + vect_1, vect_2, vect_3, vect_4, \ + mask_a, mask_b, mask_c, mask_d, \ + sense_a, sense_b, sense_c, sense_d) \ + \ +enum { \ + PINT ## p ## _UNUSED = 0, \ + enums_1 enums_2 enums_3 enums_4 \ +}; \ + \ +static struct intc_vect p ## _vectors[] __initdata = { \ + vect_1 vect_2 vect_3 vect_4 \ +}; \ + \ +static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ + { mask_reg, 0, 32, /* PINTER */ \ + { mask_a mask_b mask_c mask_d } } \ +}; \ + \ +static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ + { sense_base + 0x00, 16, 2, /* PINTCR */ \ + { sense_a } }, \ + { sense_base + 0x04, 16, 2, /* PINTCR */ \ + { sense_b } }, \ + { sense_base + 0x08, 16, 2, /* PINTCR */ \ + { sense_c } }, \ + { sense_base + 0x0c, 16, 2, /* PINTCR */ \ + { sense_d } }, \ +}; \ + \ +static struct intc_desc p ## _desc __initdata = { \ + .name = str, \ + .hw = INTC_HW_DESC(p ## _vectors, NULL, \ + p ## _mask_registers, NULL, \ + p ## _sense_registers, NULL), \ +} + #endif /* __ASM_MACH_INTC_H */ -- cgit v1.2.1 From 566aad39df77211467078e0b3dcd62100f56b5e4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 17 Oct 2011 18:00:52 +0900 Subject: ARM: mach-shmobile: sh73a0 and AG5EVM PINT support Support PINT on sh73a0 and AG5EVM using INTC PINT macros. With this patch applied the AG5EVM ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 17 +------- arch/arm/mach-shmobile/include/mach/sh73a0.h | 4 ++ arch/arm/mach-shmobile/intc-sh73a0.c | 65 ++++++++++++++++++++++++++++ 3 files changed, 71 insertions(+), 15 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index d6e461710524..83624e26b884 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -59,7 +59,7 @@ static struct resource smsc9220_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), /* PINT1 */ + .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ .flags = IORESOURCE_IRQ, }, }; @@ -474,19 +474,6 @@ static void __init ag5evm_map_io(void) shmobile_setup_console(); } -#define PINTC_ADDR 0xe6900000 -#define PINTER0A (PINTC_ADDR + 0xa0) -#define PINTCR0A (PINTC_ADDR + 0xb0) - -void __init ag5evm_init_irq(void) -{ - sh73a0_init_irq(); - - /* setup PINT: enable PINTA2 as active low */ - __raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A); - __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A); -} - #define DSI0PHYCR 0xe615006c static void __init ag5evm_init(void) @@ -620,7 +607,7 @@ struct sys_timer ag5evm_timer = { MACHINE_START(AG5EVM, "ag5evm") .map_io = ag5evm_map_io, - .init_irq = ag5evm_init_irq, + .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = ag5evm_init, .timer = &ag5evm_timer, diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index b385e976797a..18ae6a990bc2 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -507,4 +507,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; +/* PINT interrupts are located at Linux IRQ 768 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) + #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 836e81557986..1eda6b0b69e3 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -363,6 +364,59 @@ static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id) static struct irqaction sh73a0_irq_pin_cascade[32]; +#define PINTER0 0xe69000a0 +#define PINTER1 0xe69000a4 +#define PINTRR0 0xe69000d0 +#define PINTRR1 0xe69000d4 + +#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq)) +#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8)) +#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16)) +#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24)) +#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq)) + +INTC_PINT(intc_pint0, PINTER0, 0xe69000b0, "sh73a0-pint0", \ + INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \ + INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ), \ + INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ), \ + INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \ + INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D)); + +INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1", \ + INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \ + INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE, \ + INTC_PINT_V_NONE, INTC_PINT_V_NONE, \ + INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \ + INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE); + +static struct irqaction sh73a0_pint0_cascade; +static struct irqaction sh73a0_pint1_cascade; + +static void pint_demux(unsigned long rr, unsigned long er, int base_irq) +{ + unsigned long value = ioread32(rr) & ioread32(er); + int k; + + for (k = 0; k < 32; k++) { + if (value & (1 << (31 - k))) { + generic_handle_irq(base_irq + k); + iowrite32(~(1 << (31 - k)), rr); + } + } +} + +static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id) +{ + pint_demux(PINTRR0, PINTER0, SH73A0_PINT0_IRQ(0)); + return IRQ_HANDLED; +} + +static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id) +{ + pint_demux(PINTRR1, PINTER1, SH73A0_PINT1_IRQ(0)); + return IRQ_HANDLED; +} + void __init sh73a0_init_irq(void) { void __iomem *gic_dist_base = __io(0xf0001000); @@ -375,6 +429,8 @@ void __init sh73a0_init_irq(void) register_intc_controller(&intcs_desc); register_intc_controller(&intca_irq_pins_desc); + register_intc_controller(&intc_pint0_desc); + register_intc_controller(&intc_pint1_desc); /* demux using INTEVTSA */ sh73a0_intcs_cascade.name = "INTCS cascade"; @@ -393,4 +449,13 @@ void __init sh73a0_init_irq(void) handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ } + + /* PINT pins are sanely tied to the GIC as SPI */ + sh73a0_pint0_cascade.name = "PINT0 cascade"; + sh73a0_pint0_cascade.handler = sh73a0_pint0_demux; + setup_irq(gic_spi(33), &sh73a0_pint0_cascade); + + sh73a0_pint1_cascade.name = "PINT1 cascade"; + sh73a0_pint1_cascade.handler = sh73a0_pint1_demux; + setup_irq(gic_spi(34), &sh73a0_pint1_cascade); } -- cgit v1.2.1 From 99f8bd8556ad829e042e66c1b25a35f1bcc38981 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 30 Aug 2011 16:19:13 +0000 Subject: ARM: mach-shmobile: ag5evm needs CONFIG_I2C ag5evm implements a backlight control, using an I2C controller, therefore it needs CONFIG_I2C to fix this make failure arch/arm/mach-shmobile/built-in.o: In function `lcd_on': pfc-sh73a0.c:(.text+0x2334): undefined reference to `i2c_get_adapter' pfc-sh73a0.c:(.text+0x2370): undefined reference to `i2c_transfer' (ignore pfc-sh73a0.c) and to build successfully. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index c1b45342e1fb..0828fab2b65c 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -26,6 +26,7 @@ config ARCH_SH73A0 select SH_CLK_CPG select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC + select I2C comment "SH-Mobile Board Type" -- cgit v1.2.1