From 99b59df04899a048d1a3ed8bc2b1263779816868 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 27 Apr 2012 16:05:51 -0700 Subject: ARM: OMAP3: PM: fix shared PRCM interrupts: leave disabled at boot By default, request_irq() will auto-enable the requested IRQ. For PRCM interrupts, we may want to avoid that until the PM core code is fully ready to handle the interrupts. This is particularily true for IO pad interrupts on OMAP3, which are shared between the hwmod core and the PRM core. In order to avoid PRCM IO-chain interrupts until the PM core is ready to handle them, ready, set the IRQ_NOAUTOEN flag for the PRCM IO-chain interrupt, which means it will remain disabled after request_irq(). Then, explicitly enable the PRCM interrupts after the request_irq() in the PM core (but not in the hwmod core.) Special thanks to Tero Kristo for suggesting to isolate the fix to only the IO-chain interrupt on OMAP3 instead of all PRCM interrupts. Cc: Tero Kristo Acked-by: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/prm2xxx_3xxx.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-omap2/prm2xxx_3xxx.c') diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce765407ad5..21cb74003a56 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "common.h" #include @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); -- cgit v1.2.1