From 2b3b3516b6eeea1464e205b2dde9ebc9b7dd2ec8 Mon Sep 17 00:00:00 2001
From: Andrew Victor <linux@maxim.org.za>
Date: Thu, 24 Jan 2008 15:10:39 +0100
Subject: [ARM] 4764/1: [AT91] AT91CAP9 core support

Add support for Atmel's AT91CAP9 Customizable Microcontroller family.
  <http://www.atmel.com/products/AT91CAP/Default.asp>

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig            |    3 +
 arch/arm/mach-at91/Makefile           |    1 +
 arch/arm/mach-at91/Makefile.boot      |    7 +-
 arch/arm/mach-at91/at91cap9.c         |  365 +++++++++++
 arch/arm/mach-at91/at91cap9_devices.c | 1066 +++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/clock.c            |    2 +
 arch/arm/mach-at91/generic.h          |    2 +
 arch/arm/mach-at91/pm.c               |    5 +
 8 files changed, 1450 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-at91/at91cap9.c
 create mode 100644 arch/arm/mach-at91/at91cap9_devices.c

(limited to 'arch/arm/mach-at91')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 214733e897e5..d12c616407d6 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -22,6 +22,9 @@ config ARCH_AT91SAM9263
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 
+config ARCH_AT91CAP9
+	bool "AT91CAP9"
+
 config ARCH_AT91X40
 	bool "AT91x40"
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 529ffb5f3f13..10413c5d3f8a 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_d
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index e667dcc7cd34..071a2506a69f 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,7 +3,12 @@
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
 
+ifeq ($(CONFIG_ARCH_AT91CAP9),y)
+   zreladdr-y	:= 0x70008000
+params_phys-y	:= 0x70000100
+initrd_phys-y	:= 0x70410000
+else
    zreladdr-y	:= 0x20008000
 params_phys-y	:= 0x20000100
 initrd_phys-y	:= 0x20410000
-
+endif
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
new file mode 100644
index 000000000000..48d27d8000b0
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-at91/at91cap9.c
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91cap9_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91CAP9_SRAM_BASE),
+		.length		= AT91CAP9_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioABCD_clk = {
+	.name		= "pioABCD_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_PIOABCD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb0_clk = {
+	.name		= "mpb0_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_MPB0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb1_clk = {
+	.name		= "mpb1_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_MPB1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb2_clk = {
+	.name		= "mpb2_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_MPB2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb3_clk = {
+	.name		= "mpb3_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_MPB3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb4_clk = {
+	.name		= "mpb4_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_MPB4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk can_clk = {
+	.name		= "can_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_CAN,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+	.name		= "ac97_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_AC97C,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+	.name		= "pwmc_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_PWMC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk aestdes_clk = {
+	.name		= "aestdes_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_AESTDES,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+	.name		= "adc_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_ADC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_DMA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91CAP9_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioABCD_clk,
+	&mpb0_clk,
+	&mpb1_clk,
+	&mpb2_clk,
+	&mpb3_clk,
+	&mpb4_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	&can_clk,
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&ac97_clk,
+	&tcb_clk,
+	&pwmc_clk,
+	&macb_clk,
+	&aestdes_clk,
+	&adc_clk,
+	&isi_clk,
+	&lcdc_clk,
+	&dma_clk,
+	&udphs_clk,
+	&ohci_clk,
+	// irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91cap9_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91cap9_gpio[] = {
+	{
+		.id		= AT91CAP9_ID_PIOABCD,
+		.offset		= AT91_PIOA,
+		.clock		= &pioABCD_clk,
+	}, {
+		.id		= AT91CAP9_ID_PIOABCD,
+		.offset		= AT91_PIOB,
+		.clock		= &pioABCD_clk,
+	}, {
+		.id		= AT91CAP9_ID_PIOABCD,
+		.offset		= AT91_PIOC,
+		.clock		= &pioABCD_clk,
+	}, {
+		.id		= AT91CAP9_ID_PIOABCD,
+		.offset		= AT91_PIOD,
+		.clock		= &pioABCD_clk,
+	}
+};
+
+static void at91cap9_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+/* --------------------------------------------------------------------
+ *  AT91CAP9 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91cap9_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+
+	at91_arch_reset = at91cap9_reset;
+	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91cap9_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91cap9_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A, B, C and D */
+	0,	/* MP Block Peripheral 0 */
+	0,	/* MP Block Peripheral 1 */
+	0,	/* MP Block Peripheral 2 */
+	0,	/* MP Block Peripheral 3 */
+	0,	/* MP Block Peripheral 4 */
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	0,	/* Multimedia Card Interface 0 */
+	0,	/* Multimedia Card Interface 1 */
+	3,	/* CAN */
+	6,	/* Two-Wire Interface */
+	5,	/* Serial Peripheral Interface 0 */
+	5,	/* Serial Peripheral Interface 1 */
+	4,	/* Serial Synchronous Controller 0 */
+	4,	/* Serial Synchronous Controller 1 */
+	5,	/* AC97 Controller */
+	0,	/* Timer Counter 0, 1 and 2 */
+	0,	/* Pulse Width Modulation Controller */
+	3,	/* Ethernet */
+	0,	/* Advanced Encryption Standard, Triple DES*/
+	0,	/* Analog-to-Digital Converter */
+	0,	/* Image Sensor Interface */
+	3,	/* LCD Controller */
+	0,	/* DMA Controller */
+	2,	/* USB Device Port */
+	2,	/* USB Host port */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91cap9_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
new file mode 100644
index 000000000000..c50fad9cd143
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -0,0 +1,1066 @@
+/*
+ * arch/arm/mach-at91/at91cap9_devices.c
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91cap9_matrix.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_UHP_BASE,
+		.end	= AT91CAP9_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_UHP,
+		.end	= AT91CAP9_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_EMAC,
+		.end	= AT91CAP9_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_EMAC,
+		.end	= AT91CAP9_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PB30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PB29, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PC25, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91cap9_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_MCI0,
+		.end	= AT91CAP9_BASE_MCI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_MCI0,
+		.end	= AT91CAP9_ID_MCI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_mmc0_device = {
+	.name		= "at91_mci",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc0_data,
+	},
+	.resource	= mmc0_resources,
+	.num_resources	= ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_MCI1,
+		.end	= AT91CAP9_BASE_MCI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_MCI1,
+		.end	= AT91CAP9_ID_MCI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_mmc1_device = {
+	.name		= "at91_mci",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc1_data,
+	},
+	.resource	= mmc1_resources,
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA2, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA0, 1);
+		if (data->wire4) {
+			at91_set_A_periph(AT91_PIN_PA3, 1);
+			at91_set_A_periph(AT91_PIN_PA4, 1);
+			at91_set_A_periph(AT91_PIN_PA5, 1);
+		}
+
+		mmc0_data = *data;
+		at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91cap9_mmc0_device);
+	} else {			/* MCI1 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA16, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA17, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA18, 1);
+		if (data->wire4) {
+			at91_set_A_periph(AT91_PIN_PA19, 1);
+			at91_set_A_periph(AT91_PIN_PA20, 1);
+			at91_set_A_periph(AT91_PIN_PA21, 1);
+		}
+
+		mmc1_data = *data;
+		at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91cap9_mmc1_device);
+	}
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91cap9_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
+			| AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
+			| AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91cap9_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= AT91_PIN_PB4,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB5,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91cap9_twi_device = {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	at91_set_GPIO_periph(AT91_PIN_PB4, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_GPIO_periph(AT91_PIN_PB5, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at91cap9_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_TWI,
+		.end	= AT91CAP9_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_TWI,
+		.end	= AT91CAP9_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	/* pins used for TWI interface */
+	at91_set_B_periph(AT91_PIN_PB4, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_B_periph(AT91_PIN_PB5, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at91cap9_twi_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_SPI0,
+		.end	= AT91CAP9_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_SPI0,
+		.end	= AT91CAP9_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_SPI1,
+		.end	= AT91CAP9_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_SPI1,
+		.end	= AT91CAP9_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91cap9_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91cap9_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTT
+ * -------------------------------------------------------------------- */
+
+static struct platform_device at91cap9_rtt_device = {
+	.name		= "at91_rtt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_rtt(void)
+{
+	platform_device_register(&at91cap9_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91cap9_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at91cap9_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct atmel_ac97_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_AC97C,
+		.end	= AT91CAP9_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_AC97C,
+		.end	= AT91CAP9_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_ac97_device = {
+	.name		= "ac97c",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PA6, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PA7, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PA8, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PA9, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91cap9_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_LCDC_BASE,
+		.end	= AT91CAP9_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_LCDC,
+		.end	= AT91CAP9_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "atmel_lcdfb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
+	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
+	at91_set_A_periph(AT91_PIN_PC25, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_SSC0,
+		.end	= AT91CAP9_BASE_SSC0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_SSC0,
+		.end	= AT91CAP9_ID_SSC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_ssc0_device = {
+	.name	= "ssc",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ssc0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc0_resources,
+	.num_resources	= ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PB0, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PB1, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PB2, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PB3, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PB4, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_SSC1,
+		.end	= AT91CAP9_BASE_SSC1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_SSC1,
+		.end	= AT91CAP9_ID_SSC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_ssc1_device = {
+	.name	= "ssc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ssc1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc1_resources,
+	.num_resources	= ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PB6, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PB7, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PB8, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PB9, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PB10, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver.  For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	/*
+	 * NOTE: caller is responsible for passing information matching
+	 * "pins" to whatever will be using each particular controller.
+	 */
+	switch (id) {
+	case AT91CAP9_ID_SSC0:
+		pdev = &at91cap9_ssc0_device;
+		configure_ssc0_pins(pins);
+		at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+		break;
+	case AT91CAP9_ID_SSC1:
+		pdev = &at91cap9_ssc1_device;
+		configure_ssc1_pins(pins);
+		at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+		break;
+	default:
+		return;
+	}
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &dbgu_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &dbgu_data,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_US0,
+		.end	= AT91CAP9_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_US0,
+		.end	= AT91CAP9_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &uart0_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart0_data,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PA22, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA23, 0);		/* RXD0 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PA24, 0);	/* RTS0 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PA25, 0);	/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_US1,
+		.end	= AT91CAP9_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_US1,
+		.end	= AT91CAP9_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.dma_mask		= &uart1_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart1_data,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PD7, 0);	/* RTS1 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PD8, 0);	/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_US2,
+		.end	= AT91CAP9_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_US2,
+		.end	= AT91CAP9_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.dma_mask		= &uart2_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart2_data,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PD5, 0);	/* RTS2 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
+}
+
+static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+		case 0:		/* DBGU */
+			pdev = &at91cap9_dbgu_device;
+			configure_dbgu_pins();
+			at91_clock_associate("mck", &pdev->dev, "usart");
+			break;
+		case AT91CAP9_ID_US0:
+			pdev = &at91cap9_uart0_device;
+			configure_usart0_pins(pins);
+			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+			break;
+		case AT91CAP9_ID_US1:
+			pdev = &at91cap9_uart1_device;
+			configure_usart1_pins(pins);
+			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+			break;
+		case AT91CAP9_ID_US2:
+			pdev = &at91cap9_uart2_device;
+			configure_usart2_pins(pins);
+			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+			break;
+		default:
+			return;
+	}
+	pdev->id = portnr;		/* update to mapped ID */
+
+	if (portnr < ATMEL_MAX_UART)
+		at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+	if (portnr < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[portnr];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtt();
+	at91_add_device_watchdog();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 57c3b647ce83..ec76eeaafd45 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -574,6 +574,8 @@ int __init at91_clock_init(unsigned long main_clock)
 	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+	} else if (cpu_is_at91cap9()) {
+		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
 	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 77d4c0a37842..b5daf7f5e011 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -15,6 +15,7 @@ extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
 extern void __init at91sam9rl_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91cap9_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -23,6 +24,7 @@ extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
+extern void __init at91cap9_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 98cb61482917..4b120cc36135 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -80,6 +80,11 @@ static int at91_pm_verify_clocks(void)
 			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
+	} else if (cpu_is_at91cap9()) {
+		if ((scsr & AT91CAP9_PMC_UHP) != 0) {
+			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+			return 0;
+		}
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-- 
cgit v1.2.1