From 64d3b6a3f480154b6727dd2187f5f2b58c15da77 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 9 Apr 2014 21:24:02 +0100 Subject: ARM: 8023/1: remove remnants of the static DMA mapping It looks like the static mapping area for DMA was replaced by dynamic allocation into the vmalloc area by commit e9da6e9905e6 but the information in Documentation/arm/memory.txt was not removed accordingly. CONSISTENT_END in arch/arm/include/asm/memory.h has no more users and can be removed as well. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/memory.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 02fa2558f662..2b751464d6ff 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -83,8 +83,6 @@ */ #define IOREMAP_MAX_ORDER 24 -#define CONSISTENT_END (0xffe00000UL) - #else /* CONFIG_MMU */ /* -- cgit v1.2.1 From 4221e2e6b3160e4b558df14fa79f025c0e277935 Mon Sep 17 00:00:00 2001 From: Liu Hua Date: Fri, 18 Apr 2014 09:27:01 +0100 Subject: ARM: 8031/1: fixmap: remove FIX_KMAP_BEGIN and FIX_KMAP_END It seems that these two macros are not used by non architecture specific code. And on ARM FIX_KMAP_BEGIN equals zero. This patch removes these two macros. Instead, using FIX_KMAP_NR_PTES to tell the pte number belonged to fixmap mapping region. The code will become clearer when I introduce a bugfix on fixmap mapping region. Reviewed-by: Nicolas Pitre Signed-off-by: Liu Hua Signed-off-by: Russell King --- arch/arm/include/asm/fixmap.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h index bbae919bceb4..be55ebc08ed4 100644 --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -17,8 +17,7 @@ #define FIXADDR_TOP 0xfffe0000UL #define FIXADDR_SIZE (FIXADDR_TOP - FIXADDR_START) -#define FIX_KMAP_BEGIN 0 -#define FIX_KMAP_END (FIXADDR_SIZE >> PAGE_SHIFT) +#define FIX_KMAP_NR_PTES (FIXADDR_SIZE >> PAGE_SHIFT) #define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT)) #define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT) @@ -27,7 +26,7 @@ extern void __this_fixmap_does_not_exist(void); static inline unsigned long fix_to_virt(const unsigned int idx) { - if (idx >= FIX_KMAP_END) + if (idx >= FIX_KMAP_NR_PTES) __this_fixmap_does_not_exist(); return __fix_to_virt(idx); } -- cgit v1.2.1 From a05e54c103b0b8e1dab5d04b411f1d48387c4903 Mon Sep 17 00:00:00 2001 From: Liu Hua Date: Fri, 18 Apr 2014 09:43:32 +0100 Subject: ARM: 8031/2: change fixmap mapping region to support 32 CPUs In 32-bit ARM systems, the fixmap mapping region can support no more than 14 CPUs(total: 896k; one CPU: 64K). And we can configure NR_CPUS up to 32. So there is a mismatch. This patch moves fixmapping region downwards to region 0xffc00000- 0xffe00000. Then the fixmap mapping region can support up to 32 CPUs. Reviewed-by: Nicolas Pitre Signed-off-by: Liu Hua Signed-off-by: Russell King --- arch/arm/include/asm/fixmap.h | 16 ++-------------- arch/arm/include/asm/highmem.h | 1 + 2 files changed, 3 insertions(+), 14 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h index be55ebc08ed4..74124b0d0d79 100644 --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -1,20 +1,8 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -/* - * Nothing too fancy for now. - * - * On ARM we already have well known fixed virtual addresses imposed by - * the architecture such as the vector page which is located at 0xffff0000, - * therefore a second level page table is already allocated covering - * 0xfff00000 upwards. - * - * The cache flushing code in proc-xscale.S uses the virtual area between - * 0xfffe0000 and 0xfffeffff. - */ - -#define FIXADDR_START 0xfff00000UL -#define FIXADDR_TOP 0xfffe0000UL +#define FIXADDR_START 0xffc00000UL +#define FIXADDR_TOP 0xffe00000UL #define FIXADDR_SIZE (FIXADDR_TOP - FIXADDR_START) #define FIX_KMAP_NR_PTES (FIXADDR_SIZE >> PAGE_SHIFT) diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 91b99abe7a95..535579511ed0 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -18,6 +18,7 @@ } while (0) extern pte_t *pkmap_page_table; +extern pte_t *fixmap_page_table; extern void *kmap_high(struct page *page); extern void kunmap_high(struct page *page); -- cgit v1.2.1 From 265c271c822bd57677e3b286389487fd45e6960d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 15 Mar 2014 16:47:44 +0000 Subject: ARM: l2c: remove outer_inv_all() method No one ever calls this function anywhere in the kernel, so let's completely remove it from the outer cache API and turn it into an internal-only thing. Signed-off-by: Russell King --- arch/arm/include/asm/outercache.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index f94784f0e3a6..0e4420858990 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -28,7 +28,6 @@ struct outer_cache_fns { void (*clean_range)(unsigned long, unsigned long); void (*flush_range)(unsigned long, unsigned long); void (*flush_all)(void); - void (*inv_all)(void); void (*disable)(void); #ifdef CONFIG_OUTER_CACHE_SYNC void (*sync)(void); @@ -63,12 +62,6 @@ static inline void outer_flush_all(void) outer_cache.flush_all(); } -static inline void outer_inv_all(void) -{ - if (outer_cache.inv_all) - outer_cache.inv_all(); -} - static inline void outer_disable(void) { if (outer_cache.disable) @@ -90,7 +83,6 @@ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { } static inline void outer_flush_all(void) { } -static inline void outer_inv_all(void) { } static inline void outer_disable(void) { } static inline void outer_resume(void) { } -- cgit v1.2.1 From bc4f94d85cad6035d02d2bed1b27f9bea7e7b6e6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Mar 2014 10:52:55 +0000 Subject: ARM: outer cache: add documentation of outer cache functions Add some documentation to cover the outer cache functions so that their requirements can be better understood. Of particular note are the flush_all() and disable() methods which must not be called except in very specific circumstances. Signed-off-by: Russell King --- arch/arm/include/asm/outercache.h | 48 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 0e4420858990..2615b3d9e807 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -39,35 +39,75 @@ struct outer_cache_fns { extern struct outer_cache_fns outer_cache; #ifdef CONFIG_OUTER_CACHE - +/** + * outer_inv_range - invalidate range of outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.inv_range) outer_cache.inv_range(start, end); } + +/** + * outer_clean_range - clean dirty outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.clean_range) outer_cache.clean_range(start, end); } + +/** + * outer_flush_range - clean and invalidate outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.flush_range) outer_cache.flush_range(start, end); } +/** + * outer_flush_all - clean and invalidate all cache lines in the outer cache + * + * Note: depending on implementation, this may not be atomic - it must + * only be called with interrupts disabled and no other active outer + * cache masters. + * + * It is intended that this function is only used by implementations + * needing to override the outer_cache.disable() method due to security. + * (Some implementations perform this as a clean followed by an invalidate.) + */ static inline void outer_flush_all(void) { if (outer_cache.flush_all) outer_cache.flush_all(); } +/** + * outer_disable - clean, invalidate and disable the outer cache + * + * Disable the outer cache, ensuring that any data contained in the outer + * cache is pushed out to lower levels of system memory. The note and + * conditions above concerning outer_flush_all() applies here. + */ static inline void outer_disable(void) { if (outer_cache.disable) outer_cache.disable(); } +/** + * outer_resume - restore the cache configuration and re-enable outer cache + * + * Restore any configuration that the cache had when previously enabled, + * and re-enable the outer cache. + */ static inline void outer_resume(void) { if (outer_cache.resume) @@ -89,6 +129,12 @@ static inline void outer_resume(void) { } #endif #ifdef CONFIG_OUTER_CACHE_SYNC +/** + * outer_sync - perform a sync point for outer cache + * + * Ensure that all outer cache operations are complete and any store + * buffers are drained. + */ static inline void outer_sync(void) { if (outer_cache.sync) -- cgit v1.2.1 From 537094b64b229bf3ad146042f83e74cf6abe59df Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Wed, 7 May 2014 08:07:25 +0100 Subject: ARM: 8051/1: put_user: fix possible data corruption in put_user According to arm procedure call standart r2 register is call-cloberred. So after the result of x expression was put into r2 any following function call in p may overwrite r2. To fix this, the result of p expression must be saved to the temporary variable before the assigment x expression to __r2. Signed-off-by: Andrey Ryabinin Reviewed-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/include/asm/uaccess.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 12c3a5decc60..75d95799b6e6 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -171,8 +171,9 @@ extern int __put_user_8(void *, unsigned long long); #define __put_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ + const typeof(*(p)) __user *__tmp_p = (p); \ register const typeof(*(p)) __r2 asm("r2") = (x); \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \ register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ -- cgit v1.2.1 From cd000cf650cd43dc0dc37032cb4016985c9dda6c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 17:06:02 +0100 Subject: ARM: 8046/1: proc: add support for the Cortex-A17 processor Cortex-A17 has identical initialisation requirements to Cortex-A12, so hook it up in proc-v7.S in the same way. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/cputype.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index c651e3b26ec7..550bf7110fef 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -72,6 +72,7 @@ #define ARM_CPU_PART_CORTEX_A15 0xC0F0 #define ARM_CPU_PART_CORTEX_A7 0xC070 #define ARM_CPU_PART_CORTEX_A12 0xC0D0 +#define ARM_CPU_PART_CORTEX_A17 0xC0E0 #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 -- cgit v1.2.1 From 9581960a40ab0e281b695bf03744c8924ec3b5d0 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 9 May 2014 18:36:27 +0100 Subject: ARM: 8055/1: cacheflush: use -st dsb option for ensuring completion dsb st can be used to ensure completion of pending cache maintenance operations, so use it for the v7 cache maintenance operations. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 8b8b61685a34..00af9fe435e6 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -212,7 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, static inline void __flush_icache_all(void) { __flush_icache_preferred(); - dsb(); + dsb(ishst); } /* -- cgit v1.2.1 From 166aaf396654b533f536f2cf84d7558eb42f1c9f Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Thu, 17 Apr 2014 16:58:39 +0100 Subject: ARM: 8029/1: mcpm: Rename the power_down_finish() functions to be less confusing The name "power_down_finish" seems to be causing some confusion, because it suggests that this function is responsible for taking some action to cause the specified CPU to complete its power down. This patch renames the affected functions to "wait_for_powerdown" and similar, since this function's intended purpose is just to wait for the hardware to finish a powerdown initiated by a previous cpu_power_down. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/mcpm.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 608516ebabfe..90ed21942456 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -91,14 +91,14 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster); * previously in which case the caller should take appropriate action. * * On success, the CPU is not guaranteed to be truly halted until - * mcpm_cpu_power_down_finish() subsequently returns non-zero for the + * mcpm_wait_for_cpu_powerdown() subsequently returns non-zero for the * specified cpu. Until then, other CPUs should make sure they do not * trash memory the target CPU might be executing/accessing. */ void mcpm_cpu_power_down(void); /** - * mcpm_cpu_power_down_finish - wait for a specified CPU to halt, and + * mcpm_wait_for_cpu_powerdown - wait for a specified CPU to halt, and * make sure it is powered off * * @cpu: CPU number within given cluster @@ -120,7 +120,7 @@ void mcpm_cpu_power_down(void); * - zero if the CPU is in a safely parked state * - nonzero otherwise (e.g., timeout) */ -int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster); +int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster); /** * mcpm_cpu_suspend - bring the calling CPU in a suspended state @@ -164,7 +164,7 @@ int mcpm_cpu_powered_up(void); struct mcpm_platform_ops { int (*power_up)(unsigned int cpu, unsigned int cluster); void (*power_down)(void); - int (*power_down_finish)(unsigned int cpu, unsigned int cluster); + int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); void (*suspend)(u64); void (*powered_up)(void); }; -- cgit v1.2.1 From 72e6ae285a1dbff553734985bedadf409d99c02d Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Tue, 29 Apr 2014 04:20:52 +0100 Subject: ARM: 8043/1: uprobes need icache flush after xol write After instruction write into xol area, on ARM V7 architecture code need to flush dcache and icache to sync them up for given set of addresses. Having just 'flush_dcache_page(page)' call is not enough - it is possible to have stale instruction sitting in icache for given xol area slot address. Introduce arch_uprobe_ixol_copy weak function that by default calls uprobes copy_to_page function and than flush_dcache_page function and on ARM define new one that handles xol slot copy in ARM specific way flush_uprobe_xol_access function shares/reuses implementation with/of flush_ptrace_access function and takes care of writing instruction to user land address space on given variety of different cache types on ARM CPUs. Because flush_uprobe_xol_access does not have vma around flush_ptrace_access was split into two parts. First that retrieves set of condition from vma and common that receives those conditions as flags. Note ARM cache flush function need kernel address through which instruction write happened, so instead of using uprobes copy_to_page function changed code to explicitly map page and do memcpy. Note arch_uprobe_copy_ixol function, in similar way as copy_to_user_page function, has preempt_disable/preempt_enable. Signed-off-by: Victor Kamensky Acked-by: Oleg Nesterov Reviewed-by: David A. Long Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 00af9fe435e6..fd43f7f55b70 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -487,4 +487,6 @@ int set_memory_rw(unsigned long addr, int numpages); int set_memory_x(unsigned long addr, int numpages); int set_memory_nx(unsigned long addr, int numpages); +void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, + void *kaddr, unsigned long len); #endif -- cgit v1.2.1 From 0e0779da2233f2dfc85e9c3a6ea142476d326811 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Thu, 8 May 2014 17:31:40 +0100 Subject: ARM: 8053/1: kernel: sleep: restore HYP mode configuration in cpu_resume On CPUs with virtualization extensions the kernel installs HYP mode configuration on both primary and secondary cpus upon cold boot. On platforms where CPUs are shutdown in idle paths (ie CPU core gating), when a CPU resumes from low-power states it currently does not execute code that reinstalls the HYP configuration, which means that the kernel cannot run eg KVM properly on such machines. This patch, mirroring cold-boot behaviour, executes position independent code that reinstalls HYP configuration and drops to SVC mode safely on warmboot, so that deep idle states can be enabled in kernel running as hosts on platforms with power management HW. Cc: Christoffer Dall Cc: Dave Martin Cc: Marc Zyngier Cc: Nicolas Pitre Signed-off-by: Lorenzo Pieralisi Acked-by: Marc Zyngier Reviewed-by: Dave Martin Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b974184f9941..57f0584e8d97 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -312,7 +312,7 @@ * you cannot return to the original mode. */ .macro safe_svcmode_maskall reg:req -#if __LINUX_ARM_ARCH__ >= 6 +#if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M) mrs \reg , cpsr eor \reg, \reg, #HYP_MODE tst \reg, #MODE_MASK -- cgit v1.2.1 From 1f1d5b745a4617a2cb2ffd8f4a9bc3be664cfc98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Mar 2014 13:14:38 +0000 Subject: ARM: outer cache: add WARN_ON() to outer_disable() Add WARN_ON() conditions to outer_disable() to ensure that its requirements aren't violated. Signed-off-by: Russell King --- arch/arm/include/asm/outercache.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 2615b3d9e807..e96f194bf3d4 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -96,11 +96,7 @@ static inline void outer_flush_all(void) * cache is pushed out to lower levels of system memory. The note and * conditions above concerning outer_flush_all() applies here. */ -static inline void outer_disable(void) -{ - if (outer_cache.disable) - outer_cache.disable(); -} +extern void outer_disable(void); /** * outer_resume - restore the cache configuration and re-enable outer cache -- cgit v1.2.1 From 14b882cfa3f9db3430037dca6038e161eda953a1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 15 Mar 2014 16:47:49 +0000 Subject: ARM: l2c: add and use L2C revision constants The revision namespace is specific to the L2 cache part, so don't name these with generic identifiers, use a part specific identifier. Signed-off-by: Russell King --- arch/arm/include/asm/hardware/cache-l2x0.h | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 6795ff743b3d..3af45734b514 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -68,14 +68,24 @@ /* Registers shifts and masks */ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L220 (2 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_CACHE_ID_RTL_MASK 0x3f -#define L2X0_CACHE_ID_RTL_R0P0 0x0 -#define L2X0_CACHE_ID_RTL_R1P0 0x2 -#define L2X0_CACHE_ID_RTL_R2P0 0x4 -#define L2X0_CACHE_ID_RTL_R3P0 0x5 -#define L2X0_CACHE_ID_RTL_R3P1 0x6 -#define L2X0_CACHE_ID_RTL_R3P2 0x8 +#define L210_CACHE_ID_RTL_R0P2_02 0x00 +#define L210_CACHE_ID_RTL_R0P1 0x01 +#define L210_CACHE_ID_RTL_R0P2_01 0x02 +#define L210_CACHE_ID_RTL_R0P3 0x03 +#define L210_CACHE_ID_RTL_R0P4 0x0b +#define L210_CACHE_ID_RTL_R0P5 0x0f +#define L220_CACHE_ID_RTL_R1P7_01REL0 0x06 +#define L310_CACHE_ID_RTL_R0P0 0x00 +#define L310_CACHE_ID_RTL_R1P0 0x02 +#define L310_CACHE_ID_RTL_R2P0 0x04 +#define L310_CACHE_ID_RTL_R3P0 0x05 +#define L310_CACHE_ID_RTL_R3P1 0x06 +#define L310_CACHE_ID_RTL_R3P1_50REL0 0x07 +#define L310_CACHE_ID_RTL_R3P2 0x08 +#define L310_CACHE_ID_RTL_R3P3 0x09 #define L2X0_AUX_CTRL_MASK 0xc0000fff #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 -- cgit v1.2.1 From 8abd259f657d5742f96ffd46ed65feb11c44b1fb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Mar 2014 17:38:08 +0000 Subject: ARM: l2c: provide generic hook to intercept writes to secure registers When Linux is running in the non-secure world, any write to a secure L2C register will generate an abort. Platforms normally have to call firmware to work around this. Provide a hook for them to intercept any L2C secure register write. l2c_write_sec() avoids writes to secure registers which are already set to the appropriate value, thus avoiding the overhead of needlessly calling into the secure monitor. Signed-off-by: Russell King --- arch/arm/include/asm/outercache.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index e96f194bf3d4..864afe2114d3 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -32,8 +32,11 @@ struct outer_cache_fns { #ifdef CONFIG_OUTER_CACHE_SYNC void (*sync)(void); #endif - void (*set_debug)(unsigned long); void (*resume)(void); + + /* This is an ARM L2C thing */ + void (*set_debug)(unsigned long); + void (*write_sec)(unsigned long, unsigned); }; extern struct outer_cache_fns outer_cache; -- cgit v1.2.1 From 1a5a954ce0dd8ba1fc8b5305bcdb6e4cf7d6939b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Mar 2014 20:52:25 +0000 Subject: ARM: l2c: fix register naming We have a mixture of different devices with different register layouts, but we group all the bits together in an opaque mess. Split them out into those which are L2C-310 specific and ones which refer to earlier devices. Provide full auxiliary control register definitions. Acked-by: Tony Lindgren Acked-by: Linus Walleij Acked-by: Shawn Guo Acked-by: Stephen Warren Signed-off-by: Russell King --- arch/arm/include/asm/hardware/cache-l2x0.h | 73 ++++++++++++++++++++---------- 1 file changed, 48 insertions(+), 25 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 3af45734b514..b3ee122c6f24 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -26,8 +26,8 @@ #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 -#define L2X0_TAG_LATENCY_CTRL 0x108 -#define L2X0_DATA_LATENCY_CTRL 0x10C +#define L310_TAG_LATENCY_CTRL 0x108 +#define L310_DATA_LATENCY_CTRL 0x10C #define L2X0_EVENT_CNT_CTRL 0x200 #define L2X0_EVENT_CNT1_CFG 0x204 #define L2X0_EVENT_CNT0_CFG 0x208 @@ -54,16 +54,16 @@ #define L2X0_LOCKDOWN_WAY_D_BASE 0x900 #define L2X0_LOCKDOWN_WAY_I_BASE 0x904 #define L2X0_LOCKDOWN_STRIDE 0x08 -#define L2X0_ADDR_FILTER_START 0xC00 -#define L2X0_ADDR_FILTER_END 0xC04 +#define L310_ADDR_FILTER_START 0xC00 +#define L310_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 #define L2X0_DEBUG_CTRL 0xF40 -#define L2X0_PREFETCH_CTRL 0xF60 -#define L2X0_POWER_CTRL 0xF80 -#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1) -#define L2X0_STNDBY_MODE_EN (1 << 0) +#define L310_PREFETCH_CTRL 0xF60 +#define L310_POWER_CTRL 0xF80 +#define L310_DYNAMIC_CLK_GATING_EN (1 << 1) +#define L310_STNDBY_MODE_EN (1 << 0) /* Registers shifts and masks */ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) @@ -88,29 +88,52 @@ #define L310_CACHE_ID_RTL_R3P3 0x09 #define L2X0_AUX_CTRL_MASK 0xc0000fff +/* L2C auxiliary control register - bits common to L2C-210/220/310 */ +#define L2C_AUX_CTRL_WAY_SIZE_SHIFT 17 +#define L2C_AUX_CTRL_WAY_SIZE_MASK (7 << 17) +#define L2C_AUX_CTRL_WAY_SIZE(n) ((n) << 17) +#define L2C_AUX_CTRL_EVTMON_ENABLE BIT(20) +#define L2C_AUX_CTRL_PARITY_ENABLE BIT(21) +#define L2C_AUX_CTRL_SHARED_OVERRIDE BIT(22) +/* L2C-210/220 common bits */ #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 -#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK (7 << 0) #define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 -#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (7 << 3) #define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 -#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (7 << 6) #define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 -#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) -#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 -#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) -#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 -#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 -#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 -#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT 28 -#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 -#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (7 << 9) +#define L2X0_AUX_CTRL_ASSOC_SHIFT 13 +#define L2X0_AUX_CTRL_ASSOC_MASK (15 << 13) +/* L2C-210 specific bits */ +#define L210_AUX_CTRL_WRAP_DISABLE BIT(12) +#define L210_AUX_CTRL_WA_OVERRIDE BIT(23) +#define L210_AUX_CTRL_EXCLUSIVE_ABORT BIT(24) +/* L2C-220 specific bits */ +#define L220_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L220_AUX_CTRL_FWA_SHIFT 23 +#define L220_AUX_CTRL_FWA_MASK (3 << 23) +#define L220_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L220_AUX_CTRL_NS_INT_CTRL BIT(27) +/* L2C-310 specific bits */ +#define L310_AUX_CTRL_FULL_LINE_ZERO BIT(0) /* R2P0+ */ +#define L310_AUX_CTRL_HIGHPRIO_SO_DEV BIT(10) /* R2P0+ */ +#define L310_AUX_CTRL_STORE_LIMITATION BIT(11) /* R2P0+ */ +#define L310_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L310_AUX_CTRL_ASSOCIATIVITY_16 BIT(16) +#define L310_AUX_CTRL_CACHE_REPLACE_RR BIT(25) /* R2P0+ */ +#define L310_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L310_AUX_CTRL_NS_INT_CTRL BIT(27) +#define L310_AUX_CTRL_DATA_PREFETCH BIT(28) +#define L310_AUX_CTRL_INSTR_PREFETCH BIT(29) +#define L310_AUX_CTRL_EARLY_BRESP BIT(30) /* R2P0+ */ -#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 -#define L2X0_LATENCY_CTRL_RD_SHIFT 4 -#define L2X0_LATENCY_CTRL_WR_SHIFT 8 +#define L310_LATENCY_CTRL_SETUP(n) ((n) << 0) +#define L310_LATENCY_CTRL_RD(n) ((n) << 4) +#define L310_LATENCY_CTRL_WR(n) ((n) << 8) -#define L2X0_ADDR_FILTER_EN 1 +#define L310_ADDR_FILTER_EN 1 #define L2X0_CTRL_EN 1 -- cgit v1.2.1 From 805604ef8596968e5f251c69fd92bd3b8f466317 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 28 Apr 2014 15:24:10 +0100 Subject: ARM: l2c: add platform independent core L2 cache OF initialisation Add a hook into the core ARM code to perform L2 cache initialisation in a platform independent manner. Platforms still get to indicate their auxiliary control register values and mask, but the initialisation call will now be made from generic code. Signed-off-by: Russell King --- arch/arm/include/asm/mach/arch.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 17a3fa2979e8..5249cc3c52f4 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -45,6 +45,9 @@ struct machine_desc { unsigned char reserve_lp1 :1; /* never has lp1 */ unsigned char reserve_lp2 :1; /* never has lp2 */ enum reboot_mode reboot_mode; /* default restart mode */ + unsigned l2c_aux_val; /* L2 cache aux value */ + unsigned l2c_aux_mask; /* L2 cache aux mask */ + void (*l2c_write_sec)(unsigned long, unsigned); struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); void (*fixup)(struct tag *, char **, -- cgit v1.2.1 From 851d6d7117b97d72a0ae84a4d6640d310ea63d1b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Mar 2014 12:24:42 +0000 Subject: ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this L2X0_AUX_CTRL_MASK is not useful for PL310s. It would be better if people thought about their value for this rather than cargo-cult programming. Signed-off-by: Russell King --- arch/arm/include/asm/hardware/cache-l2x0.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index b3ee122c6f24..84bbd31b8910 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -87,7 +87,6 @@ #define L310_CACHE_ID_RTL_R3P2 0x08 #define L310_CACHE_ID_RTL_R3P3 0x09 -#define L2X0_AUX_CTRL_MASK 0xc0000fff /* L2C auxiliary control register - bits common to L2C-210/220/310 */ #define L2C_AUX_CTRL_WAY_SIZE_SHIFT 17 #define L2C_AUX_CTRL_WAY_SIZE_MASK (7 << 17) -- cgit v1.2.1 From 678ea28b7c3cc9a7196192dc77dfc13513db3d5f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Mar 2014 19:38:25 +0000 Subject: ARM: l2c: remove old .set_debug method We no longer need or require the .set_debug method; we handle everything it used to do via the .write_sec method instead. Signed-off-by: Russell King --- arch/arm/include/asm/outercache.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 864afe2114d3..891a56b35bcf 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -35,7 +35,6 @@ struct outer_cache_fns { void (*resume)(void); /* This is an ARM L2C thing */ - void (*set_debug)(unsigned long); void (*write_sec)(unsigned long, unsigned); }; -- cgit v1.2.1 From 8ef418c7178fa611d84e187bacb967880f6f5b69 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Mar 2014 21:40:01 +0000 Subject: ARM: l2c: trial at enabling some Cortex-A9 optimisations Signed-off-by: Russell King --- arch/arm/include/asm/hardware/cache-l2x0.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 84bbd31b8910..3a5ec1c25659 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -134,6 +134,14 @@ #define L310_ADDR_FILTER_EN 1 +#define L310_PREFETCH_CTRL_OFFSET_MASK 0x1f +#define L310_PREFETCH_CTRL_DBL_LINEFILL_INCR BIT(23) +#define L310_PREFETCH_CTRL_PREFETCH_DROP BIT(24) +#define L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP BIT(27) +#define L310_PREFETCH_CTRL_DATA_PREFETCH BIT(28) +#define L310_PREFETCH_CTRL_INSTR_PREFETCH BIT(29) +#define L310_PREFETCH_CTRL_DBL_LINEFILL BIT(30) + #define L2X0_CTRL_EN 1 #define L2X0_WAY_SIZE_SHIFT 3 -- cgit v1.2.1 From 8a87411b649c6082aebea613e84dcb3f174f72fb Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 17:06:19 +0100 Subject: ARM: 8047/1: rwsem: use asm-generic rwsem implementation asm-generic offers an atomic-add based rwsem implementation, which can avoid the need for heavier, spinlock-based synchronisation on the fast path. This patch makes use of the optimised implementation for ARM CPUs. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 23e728ecf8ab..f5a357601983 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -21,6 +21,7 @@ generic-y += parport.h generic-y += poll.h generic-y += preempt.h generic-y += resource.h +generic-y += rwsem.h generic-y += sections.h generic-y += segment.h generic-y += sembuf.h -- cgit v1.2.1 From 2961b4bf70f833f16d522823ac16c5bb9e277ef7 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 26 May 2014 10:30:14 +0100 Subject: ARM: 8065/1: remove last use of CONFIG_CPU_ARM710 Support for ARM710 CPUs was removed in v3.5. Now remove the last code depending on its Kconfig macro. Signed-off-by: Paul Bolle Acked-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/include/asm/glue-df.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h index 6b70f1b46a6e..04e18b656659 100644 --- a/arch/arm/include/asm/glue-df.h +++ b/arch/arm/include/asm/glue-df.h @@ -31,14 +31,6 @@ #undef CPU_DABORT_HANDLER #undef MULTI_DABORT -#if defined(CONFIG_CPU_ARM710) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm7_data_abort -# endif -#endif - #ifdef CONFIG_CPU_ABRT_EV4 # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 -- cgit v1.2.1 From 1c8c3cf0b5239388e712508a85821f4718f4d889 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 19 May 2014 11:04:39 +0100 Subject: ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type Due to a design incompatibility between the PCIe Marvell controller and the Cortex-A9, stressing PCIe devices with a lot of traffic quickly causes a deadlock. One part of the workaround for this is to have all PCIe regions mapped as strongly-ordered (MT_UNCACHED) instead of the default MT_DEVICE. While the arch_ioremap_caller() mechanism allows sub-architecture code to override ioremap(), used to map PCIe memory regions, there isn't such a mechanism to override the behavior of pci_ioremap_io(). This commit adds the arch_pci_ioremap_mem_type variable, initialized to MT_DEVICE by default, and that sub-architecture code can override. We have chosen to expose a single variable rather than offering the possibility of overriding the entire pci_ioremap_io(), because implementing pci_ioremap_io() requires calling functions (get_mem_type()) that are private to the arch/arm/mm/ code. Signed-off-by: Thomas Petazzoni Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/include/asm/io.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 8aa4cca74501..3d23418cbddd 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -179,6 +179,12 @@ static inline void __iomem *__typesafe_io(unsigned long addr) /* PCI fixed i/o mapping */ #define PCI_IO_VIRT_BASE 0xfee00000 +#if defined(CONFIG_PCI) +void pci_ioremap_set_mem_type(int mem_type); +#else +static inline void pci_ioremap_set_mem_type(int mem_type) {} +#endif + extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr); /* -- cgit v1.2.1 From 1c2f87c22566cd057bc8cde10c37ae9da1a1bb76 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Sun, 13 Apr 2014 22:54:58 +0100 Subject: ARM: 8025/1: Get rid of meminfo memblock is now fully integrated into the kernel and is the prefered method for tracking memory. Rather than reinvent the wheel with meminfo, migrate to using memblock directly instead of meminfo as an intermediate. Acked-by: Jason Cooper Acked-by: Catalin Marinas Acked-by: Santosh Shilimkar Acked-by: Kukjin Kim Tested-by: Marek Szyprowski Tested-by: Leif Lindholm Signed-off-by: Laura Abbott Signed-off-by: Russell King --- arch/arm/include/asm/mach/arch.h | 4 +--- arch/arm/include/asm/memblock.h | 3 +-- arch/arm/include/asm/setup.h | 28 ---------------------------- 3 files changed, 2 insertions(+), 33 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 17a3fa2979e8..c43473afde8a 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -14,7 +14,6 @@ #include struct tag; -struct meminfo; struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP @@ -47,8 +46,7 @@ struct machine_desc { enum reboot_mode reboot_mode; /* default restart mode */ struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); - void (*fixup)(struct tag *, char **, - struct meminfo *); + void (*fixup)(struct tag *, char **); void (*init_meminfo)(void); void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h index c2f5102ae659..bf47a6c110a2 100644 --- a/arch/arm/include/asm/memblock.h +++ b/arch/arm/include/asm/memblock.h @@ -1,10 +1,9 @@ #ifndef _ASM_ARM_MEMBLOCK_H #define _ASM_ARM_MEMBLOCK_H -struct meminfo; struct machine_desc; -void arm_memblock_init(struct meminfo *, const struct machine_desc *); +void arm_memblock_init(const struct machine_desc *); phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align); #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 8d6a089dfb76..e0adb9f1bf94 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -21,34 +21,6 @@ #define __tagtable(tag, fn) \ static const struct tagtable __tagtable_##fn __tag = { tag, fn } -/* - * Memory map description - */ -#define NR_BANKS CONFIG_ARM_NR_BANKS - -struct membank { - phys_addr_t start; - phys_addr_t size; - unsigned int highmem; -}; - -struct meminfo { - int nr_banks; - struct membank bank[NR_BANKS]; -}; - -extern struct meminfo meminfo; - -#define for_each_bank(iter,mi) \ - for (iter = 0; iter < (mi)->nr_banks; iter++) - -#define bank_pfn_start(bank) __phys_to_pfn((bank)->start) -#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size) -#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT) -#define bank_phys_start(bank) (bank)->start -#define bank_phys_end(bank) ((bank)->start + (bank)->size) -#define bank_phys_size(bank) (bank)->size - extern int arm_add_memory(u64 start, u64 size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); -- cgit v1.2.1