From 3bed491c8d28329e34f8a31e3fe64d03f3a350f1 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 3 Aug 2012 20:54:48 +0200 Subject: ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig, this caused severe breakage of userland applications since the upper limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr if needed. Quoting Russell King [1]: "4096 is also fine for ARM too. There's not much point in having defconfigs change it - that would just be pure noise in the config files." the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig altogether. This problem was introduced by commit cde7c41 (ARM: configs: add defconfig for mach-mxs). [1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2 Signed-off-by: Marek Vasut Cc: stable@vger.kernel.org Cc: Russell King Cc: Wolfgang Denk Signed-off-by: Shawn Guo --- arch/arm/configs/mxs_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/configs') diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb74..4edcfb4e4dee 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y -- cgit v1.2.1 From a33493775dd141a99bcd2aac9a5b6b7e8385b5a4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:48:12 +0000 Subject: ARM: imx: gpmi-nand depends on mxs-dma It is not currently possible to build the gpmi-nand driver without also building the mxs-dma driver. Clarify this Kconfig and enable both in the defconfig file so we can build it again with both enabled. drivers/built-in.o: In function `gpmi_dma_filter': clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann Acked-by: Dirk Behme Cc: Shawn Guo Cc: Sascha Hauer --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/configs') diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b33..3c9f32f9b6b4 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y -- cgit v1.2.1 From 15b5eb2d913f857ad30b0b4f1cd6867495962221 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 3 May 2012 12:47:54 +0000 Subject: ARM: s3c24xx: enable CONFIG_BUG for tct_hammer Disabling CONFIG_BUG creates an insane amount of build warnings, which makes it useless to check for building defconfigs to see if new warnings show up. Without this patch, building tct_hammer_defconfig results in: net/packet/af_packet.c: In function 'tpacket_rcv': net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized] net/core/ethtool.c: In function 'ethtool_get_feature_mask': net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type] block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type] mm/bootmem.c: In function 'mark_bootmem': mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type] net/core/dev.c: In function 'skb_warn_bad_offload': net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable] drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup': include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] (and many more) The size of vmlinux increases by 1.78% because of this: size obj-arm/vmlinux.nobug text data bss dec hex filename 2108474 116916 55352 2280742 22cd26 obj-arm/vmlinux size obj-arm/vmlinux.bug text data bss dec hex filename 2150804 116916 53696 2321416 236c08 obj-arm/vmlinux Signed-off-by: Arnd Bergmann Acked-by: Kukjin Kim Cc: Ben Dooks --- arch/arm/configs/tct_hammer_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/configs') diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458bef..71277a1591ba 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y -- cgit v1.2.1 From db43b184685632b7c23ccd47ec08b61010d55798 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 20:34:48 +0000 Subject: ARM: ux500: don't select LEDS_GPIO for snowball Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann Cc: Linus Walleij Cc: Lee Jones --- arch/arm/configs/u8500_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/configs') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf6..da6845493caa 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y -- cgit v1.2.1