From 3ab65f2bca8259cebb80bfe6aebecc80dc0f3742 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 17 Apr 2013 16:26:30 -0500 Subject: ARM: dts: OMAP4+: Remove multimedia carveouts The carveouts that have been reserved for multimedia usecases are not being used currently by any driver and so have been cleaned up. Memory will be allocated runtime through CMA for enabling the multimedia usecases. Signed-off-by: Suman Anna Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch/arm/boot/dts/omap5.dtsi') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 635cae283011..28ec8061757a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -7,14 +7,6 @@ * Based on "omap4.dtsi" */ -/* - * Carveout for multimedia usecases - * It should be the last 48MB of the first 512MB memory part - * In theory, it should not even exist. That zone should be reserved - * dynamically during the .reserve callback. - */ -/memreserve/ 0x9d000000 0x03000000; - /include/ "skeleton.dtsi" / { -- cgit v1.2.1 From 98ef795714a31b3470e9fdd6e977f6733b83f101 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Fri, 31 May 2013 14:32:55 +0200 Subject: ARM: dts: OMAP2+: Use #include for all device trees Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard Acked-by: Santosh Shilimkar Reviewed-by: Stephen Warren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/omap5.dtsi') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 28ec8061757a..2a48a029a23f 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -7,7 +7,7 @@ * Based on "omap4.dtsi" */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { #address-cells = <1>; -- cgit v1.2.1 From 6d624eabcd4bd11f1304b12f7409a48d3a7743e6 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Fri, 31 May 2013 14:32:56 +0200 Subject: ARM: dts: OMAP2+: Use existing constants for GPIOs Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard Acked-by: Santosh Shilimkar Reviewed-by: Stephen Warren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts/omap5.dtsi') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 2a48a029a23f..fa3d5a043d93 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -7,6 +7,8 @@ * Based on "omap4.dtsi" */ +#include + #include "skeleton.dtsi" / { -- cgit v1.2.1 From 8fea7d5a749b148a6a914ef2805797682072a6ab Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Fri, 31 May 2013 14:32:57 +0200 Subject: ARM: dts: OMAP4/5: Use existing constants for IRQs Use the constants defined in include/dt-bindings/interrupt-controller/ to enhance readability. Signed-off-by: Florian Vaussard Acked-by: Santosh Shilimkar Reviewed-by: Stephen Warren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 123 ++++++++++++++++++++++--------------------- 1 file changed, 62 insertions(+), 61 deletions(-) (limited to 'arch/arm/boot/dts/omap5.dtsi') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index fa3d5a043d93..c2f59dea4e55 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -8,6 +8,7 @@ */ #include +#include #include "skeleton.dtsi" @@ -38,11 +39,11 @@ timer { compatible = "arm,armv7-timer"; - /* PPI secure/nonsecure IRQ, active low level-sensitive */ - interrupts = <1 13 0x308>, - <1 14 0x308>, - <1 11 0x308>, - <1 10 0x308>; + /* PPI secure/nonsecure IRQ */ + interrupts = , + , + , + ; clock-frequency = <6144000>; }; @@ -84,8 +85,8 @@ reg = <0x44000000 0x2000>, <0x44800000 0x3000>, <0x45000000 0x4000>; - interrupts = <0 9 0x4>, - <0 10 0x4>; + interrupts = , + ; counter32k: counter@4ae04000 { compatible = "ti,omap-counter32k"; @@ -113,10 +114,10 @@ sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = <0 12 0x4>, - <0 13 0x4>, - <0 14 0x4>, - <0 15 0x4>; + interrupts = , + , + , + ; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -125,7 +126,7 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = <0 29 0x4>; + interrupts = ; ti,hwmods = "gpio1"; ti,gpio-always-on; gpio-controller; @@ -137,7 +138,7 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = <0 30 0x4>; + interrupts = ; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -148,7 +149,7 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = <0 31 0x4>; + interrupts = ; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -159,7 +160,7 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = <0 32 0x4>; + interrupts = ; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -170,7 +171,7 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = <0 33 0x4>; + interrupts = ; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -181,7 +182,7 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = <0 34 0x4>; + interrupts = ; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -192,7 +193,7 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = <0 35 0x4>; + interrupts = ; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -203,7 +204,7 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = <0 121 0x4>; + interrupts = ; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -216,7 +217,7 @@ reg = <0x50000000 0x1000>; #address-cells = <2>; #size-cells = <1>; - interrupts = <0 20 0x4>; + interrupts = ; gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; @@ -225,7 +226,7 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = <0 56 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -234,7 +235,7 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = <0 57 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -243,7 +244,7 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = <0 61 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -252,7 +253,7 @@ i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = <0 62 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -261,7 +262,7 @@ i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = <0 60 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -270,7 +271,7 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = <0 65 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -290,7 +291,7 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = <0 66 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -305,7 +306,7 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = <0 91 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -317,7 +318,7 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = <0 48 0x4>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -329,7 +330,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <0 72 0x4>; + interrupts = ; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -337,7 +338,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <0 73 0x4>; + interrupts = ; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -345,7 +346,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <0 74 0x4>; + interrupts = ; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -353,7 +354,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <0 70 0x4>; + interrupts = ; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -361,7 +362,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <0 105 0x4>; + interrupts = ; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -369,7 +370,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <0 106 0x4>; + interrupts = ; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -377,7 +378,7 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = <0 83 0x4>; + interrupts = ; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -388,7 +389,7 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = <0 86 0x4>; + interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -398,7 +399,7 @@ mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = <0 94 0x4>; + interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -408,7 +409,7 @@ mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = <0 96 0x4>; + interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -418,7 +419,7 @@ mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d5000 0x400>; - interrupts = <0 59 0x4>; + interrupts = ; ti,hwmods = "mmc5"; ti,needs-special-reset; dmas = <&sdma 59>, <&sdma 60>; @@ -436,7 +437,7 @@ reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 112 0x4>; + interrupts = ; ti,hwmods = "mcpdm"; dmas = <&sdma 65>, <&sdma 66>; @@ -448,7 +449,7 @@ reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 114 0x4>; + interrupts = ; ti,hwmods = "dmic"; dmas = <&sdma 67>; dma-names = "up_link"; @@ -459,7 +460,7 @@ reg = <0x40122000 0xff>, /* MPU private access */ <0x49022000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 17 0x4>; + interrupts = ; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; @@ -473,7 +474,7 @@ reg = <0x40124000 0xff>, /* MPU private access */ <0x49024000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 22 0x4>; + interrupts = ; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; @@ -487,7 +488,7 @@ reg = <0x40126000 0xff>, /* MPU private access */ <0x49026000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 23 0x4>; + interrupts = ; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; @@ -499,7 +500,7 @@ timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = <0 37 0x4>; + interrupts = ; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -507,21 +508,21 @@ timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = <0 38 0x4>; + interrupts = ; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = <0 39 0x4>; + interrupts = ; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = <0 40 0x4>; + interrupts = ; ti,hwmods = "timer4"; }; @@ -529,7 +530,7 @@ compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; - interrupts = <0 41 0x4>; + interrupts = ; ti,hwmods = "timer5"; ti,timer-dsp; ti,timer-pwm; @@ -539,7 +540,7 @@ compatible = "ti,omap5430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; - interrupts = <0 42 0x4>; + interrupts = ; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -549,7 +550,7 @@ compatible = "ti,omap5430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; - interrupts = <0 43 0x4>; + interrupts = ; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -558,7 +559,7 @@ compatible = "ti,omap5430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; - interrupts = <0 44 0x4>; + interrupts = ; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -567,7 +568,7 @@ timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = <0 45 0x4>; + interrupts = ; ti,hwmods = "timer9"; ti,timer-pwm; }; @@ -575,7 +576,7 @@ timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = <0 46 0x4>; + interrupts = ; ti,hwmods = "timer10"; ti,timer-pwm; }; @@ -583,7 +584,7 @@ timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = <0 47 0x4>; + interrupts = ; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -591,7 +592,7 @@ wdt2: wdt@4ae14000 { compatible = "ti,omap5-wdt", "ti,omap3-wdt"; reg = <0x4ae14000 0x80>; - interrupts = <0 80 0x4>; + interrupts = ; ti,hwmods = "wd_timer2"; }; @@ -600,7 +601,7 @@ ti,hwmods = "emif1"; phy-type = <2>; /* DDR PHY type: Intelli PHY */ reg = <0x4c000000 0x400>; - interrupts = <0 110 0x4>; + interrupts = ; hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; @@ -611,7 +612,7 @@ ti,hwmods = "emif2"; phy-type = <2>; /* DDR PHY type: Intelli PHY */ reg = <0x4d000000 0x400>; - interrupts = <0 111 0x4>; + interrupts = ; hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; @@ -629,7 +630,7 @@ compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x1000>; - interrupts = <0 93 4>; + interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -637,7 +638,7 @@ dwc3@4a030000 { compatible = "synopsys,dwc3"; reg = <0x4a030000 0x1000>; - interrupts = <0 92 4>; + interrupts = ; usb-phy = <&usb2_phy>, <&usb3_phy>; tx-fifo-resize; }; -- cgit v1.2.1 From bcd3cca741a1bb28e78cdcc83551630ed83c8244 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Fri, 31 May 2013 14:32:59 +0200 Subject: ARM: dts: OMAP2+: Use pinctrl constants Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard Acked-by: Santosh Shilimkar Reviewed-by: Stephen Warren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/omap5.dtsi') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index c2f59dea4e55..1e84db866af6 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -9,6 +9,7 @@ #include #include +#include #include "skeleton.dtsi" -- cgit v1.2.1 From ed7f8e8a1c2a40c332f1701ce317077f3cd35e7c Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 7 Jun 2013 18:52:48 +0530 Subject: ARM: dts: omap5-uevm: Add USB Host support Provide the RESET regulators for the USB PHYs, the USB Host port modes and the PHY devices. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm/boot/dts/omap5.dtsi') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 1e84db866af6..accab623dfe4 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -666,5 +666,35 @@ ctrl-module = <&omap_control_usb>; }; }; + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = ; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; }; }; -- cgit v1.2.1 From cbad26dbad4a6d5e4b226829257e479f24f835e2 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Tue, 18 Jun 2013 22:36:38 -0400 Subject: ARM: dts: OMAP5: Add bandgap DT entry Add bandgap device DT entry for OMAP5 dtsi. Cc: Tony Lindgren Cc: Russell King Signed-off-by: Eduardo Valentin Signed-off-by: J Keerthy [benoit.cousson@linaro.org: Fix alignement and use the macros for IRQ attributes] Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot/dts/omap5.dtsi') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index accab623dfe4..33db6ece9019 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -696,5 +696,14 @@ interrupts = ; }; }; + + bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c>; + interrupts = ; + compatible = "ti,omap5430-bandgap"; + }; }; }; -- cgit v1.2.1