From e77b28eb199a8d637a00128b86baf515d4eba5fd Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 12 Dec 2007 00:28:35 -0600 Subject: [POWERPC] FSL: enet device tree cleanups * Removed address fields in ethernet nodes * Removed #address-cells, #size-cells from gianfar nodes * Added cell-index to gianfar and ucc ethernet nodes * Added enet[0..3] labels * Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio" * Removed device_type = "mdio" The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo but it is now considered deprecated. Signed-off-by: Kumar Gala --- Documentation/powerpc/booting-without-of.txt | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 7327f37d78f3..c3fc9d955030 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1223,16 +1223,14 @@ platforms are moved over to use the flattened-device-tree model. Required properties: - reg : Offset and length of the register set for the device - - device_type : Should be "mdio" - compatible : Should define the compatible device type for the - mdio. Currently, this is most likely to be "gianfar" + mdio. Currently, this is most likely to be "fsl,gianfar-mdio" Example: mdio@24520 { reg = <24520 20>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; ethernet-phy@0 { ...... -- cgit v1.2.1