From 55cd65e48b62c6f08edbb93d5cadf96e876ebcc2 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 30 Aug 2011 13:17:16 -0600 Subject: mmc: sdhci-tegra: Add 8-bit support to device tree binding. The previous patch which implemented a DT binding for sdhci-tegra did not allow all platform data fields to be initialized from DT. The following were missing: is_8bit: Implemented by this patch. pm_flags: Not implemented yet. There are no mainline users of this field. I'm not quite sure what it's for, and hence how to represent this in DT; the value ends up being assigned to host->mmc->pm_caps. While we're at it, fix the binding documentation to refer to "SD/MMC" instead of "eSDHC", since that's the correct name; "eSDHC" was cut/paste from the Freescale binding docs. Signed-off-by: Stephen Warren Signed-off-by: Chris Ball --- Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt index c87f66782726..7e51154679a6 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt @@ -5,13 +5,14 @@ and SDIO types of memory cards. Required properties: - compatible : Should be "nvidia,-sdhci" -- reg : Should contain eSDHC registers location and length -- interrupts : Should contain eSDHC interrupt +- reg : Should contain SD/MMC registers location and length +- interrupts : Should contain SD/MMC interrupt Optional properties: - cd-gpios : Specify GPIOs for card detection - wp-gpios : Specify GPIOs for write protection - power-gpios : Specify GPIOs for power control +- support-8bit : Boolean, indicates if 8-bit mode should be used. Example: @@ -22,4 +23,5 @@ sdhci@c8000200 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ + support-8bit; }; -- cgit v1.2.1