From 7954dfaee386d45d6ec655e5153ad67edf311a56 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 26 Nov 2014 15:16:52 +0800 Subject: clk: sunxi: unify sun6i AHB1 clock with proper PLL6 pre-divider This patch unifies the sun6i AHB1 clock, originally supported with separate mux and divider clks. It also adds support for the pre-divider on the PLL6 input, thus allowing the clock to be muxed to PLL6 with proper clock rate calculation. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 67b2b99f2b33..9dc4f55a04ad 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -26,7 +26,7 @@ Required properties: "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20 "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31 - "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31 + "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31 "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23 "allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80 -- cgit v1.2.1 From 49cab82cb85a32b5c3e28975729cb9a5982c0d93 Mon Sep 17 00:00:00 2001 From: Tony K Nadackal Date: Wed, 17 Dec 2014 13:03:37 +0530 Subject: clk: samsung: exynos7: Add clocks for MSCL block Add clock support for the MSCL block for Exynos7. Signed-off-by: Tony K Nadackal Reviewed-by: Pankaj Dubey Signed-off-by: Sylwester Nawrocki --- Documentation/devicetree/bindings/clock/exynos7-clock.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt index 6d3d5f80c1c3..d0e048c08817 100644 --- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt @@ -34,6 +34,7 @@ Required Properties for Clock Controller: - "samsung,exynos7-clock-peris" - "samsung,exynos7-clock-fsys0" - "samsung,exynos7-clock-fsys1" + - "samsung,exynos7-clock-mscl" - reg: physical base address of the controller and the length of memory mapped region. -- cgit v1.2.1 From caa9657085bd1fcc8e5ba8f21799c75a4d8a70b5 Mon Sep 17 00:00:00 2001 From: Yoshihiro Kaneko Date: Wed, 10 Dec 2014 20:55:02 +0900 Subject: clk: shmobile: r8a7793: document CPG clock support Signed-off-by: Yoshihiro Kaneko Acked-by: Simon Horman Signed-off-by: Geert Uytterhoeven --- Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index e6ad35b894f9..fc7ef9946f40 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Must be one of - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG + - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG -- cgit v1.2.1 From 596bdcf7782899d699c13aad7b20f1d99810d1fa Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Wed, 17 Dec 2014 17:18:49 +0100 Subject: clk: shmobile: r8a73a4 common clock framework implementation Driver for the R8A73A4's clocks that are too specific to be supported by a generic driver. Signed-off-by: Ulrich Hecht Acked-by: Michael Turquette Acked-by: Laurent Pinchart Signed-off-by: Geert Uytterhoeven --- .../bindings/clock/renesas,r8a73a4-cpg-clocks.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt new file mode 100644 index 000000000000..ece92393e80d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt @@ -0,0 +1,33 @@ +* Renesas R8A73A4 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs +and several fixed ratio dividers. + +Required Properties: + + - compatible: Must be "renesas,r8a73a4-cpg-clocks" + + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the parent clocks ("extal1" and "extal2") + + - #clock-cells: Must be 1 + + - clock-output-names: The names of the clocks. Supported clocks are "main", + "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b", + "m1", "m2", "zx", "zs", and "hp". + + +Example +------- + + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a73a4-cpg-clocks"; + reg = <0 0xe6150000 0 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll2", + "pll2s", "pll2h", "z", "z2", + "i", "m3", "b", "m1", "m2", + "zx", "zs", "hp"; + }; -- cgit v1.2.1 From a2868160f402e0282611cfe72ea0d8b5e57f7aa0 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Wed, 17 Dec 2014 17:18:50 +0100 Subject: clk: shmobile: Add r8a73a4 SoC to MSTP bindings Signed-off-by: Ulrich Hecht Acked-by: Michael Turquette Acked-by: Laurent Pinchart Signed-off-by: Geert Uytterhoeven --- Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index 2e18676bd4b5..0a80fa70ca26 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -11,6 +11,7 @@ Required Properties: - compatible: Must be one of the following - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks + - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks -- cgit v1.2.1 From 90cf0e2b9660f16f944b892c2d2a08b4e0a551a8 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 6 Jan 2015 00:25:08 +0300 Subject: clk: shmobile: Add R-Car Gen2 RCAN clock support Add the RCAN clock support to the R-Car generation 2 CPG driver. This clock gets derived from the USB_EXTAL clock, dividing it by 6. The layout of the RCANCKCR register is similar to those of the clocks supported by the 'clk-div6' driver but has no divider field, and so can't be supported by that driver... Signed-off-by: Sergei Shtylyov Signed-off-by: Geert Uytterhoeven --- .../devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index fc7ef9946f40..5b704b5ab8ab 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -14,10 +14,11 @@ Required Properties: - reg: Base address and length of the memory resource used by the CPG - - clocks: Reference to the parent clock + - clocks: References to the parent clocks: first to the EXTAL clock, second + to the USB_EXTAL clock - #clock-cells: Must be 1 - clock-output-names: The names of the clocks. Supported clocks are "main", - "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z" + "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", and "rcan" Example @@ -27,8 +28,9 @@ Example compatible = "renesas,r8a7790-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0, "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "sd1", "z"; + "lb", "qspi", "sdh", "sd0", "sd1", "z", + "rcan"; }; -- cgit v1.2.1 From 1484276119fb5083a3a8cb0293e763363c317661 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 Jan 2015 01:39:52 +0300 Subject: clk: shmobile: Add R-Car Gen2 ADSP clock support Add the ADSP clock support to the R-Car generation 2 CPG driver. This clock gets derived from PLL1. The layout of the ADSPCKCR register is similar to those of the clocks supported by the 'clk-div6' driver but the divider encoding is non-linear, so can't be supported by that driver... Based on the original patch by Konstantin Kozhevnikov . Signed-off-by: Sergei Shtylyov Signed-off-by: Geert Uytterhoeven --- .../devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index 5b704b5ab8ab..b02944fba9de 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -18,7 +18,8 @@ Required Properties: to the USB_EXTAL clock - #clock-cells: Must be 1 - clock-output-names: The names of the clocks. Supported clocks are "main", - "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", and "rcan" + "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and + "adsp" Example @@ -32,5 +33,5 @@ Example #clock-cells = <1>; clock-output-names = "main", "pll0, "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", - "rcan"; + "rcan", "adsp"; }; -- cgit v1.2.1 From 6b0b8ccff002414fab08a080c7a8a6ee3db22c0d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 7 Dec 2014 17:43:04 +0100 Subject: clk: sunxi: Rework MMC phase clocks Instead of having three different clocks for the main MMC clock and the two phase sub-clocks, which involved having three different drivers sharing the same register, rework it to have the same single driver registering three different clocks. Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai Tested-by: Chen-Yu Tsai Acked-by: Mike Turquette --- Documentation/devicetree/bindings/clock/sunxi.txt | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 9dc4f55a04ad..e4c42276c577 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -55,8 +55,7 @@ Required properties: "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 - "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10 - "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10 + "allwinner,sun4i-a10-mmc-clk" - for the MMC clock "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks @@ -95,6 +94,10 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output is the normal PLL6 output, or "pll6". The second output is rate doubled PLL6, or "pll6x2". +The "allwinner,sun4i-a10-mmc-clk" has three different outputs: the +main clock, with the ID 0, and the output and sample clocks, with the +IDs 1 and 2, respectively. + For example: osc24M: clk@01c20050 { @@ -138,11 +141,11 @@ cpu: cpu@01c20054 { }; mmc0_clk: clk@01c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0"; + clock-output-names = "mmc0", "mmc0_output", "mmc0_sample"; }; mii_phy_tx_clk: clk@2 { -- cgit v1.2.1 From 6c09bb851e572bf45a3418af5f57148a31e33f9b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 12 Jul 2014 12:01:33 +0200 Subject: mmc: sunxi: Convert MMC driver to the standard clock phase API MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that we have proper support to use the generic phase API in our clock driver, switch the MMC driver to use it. Signed-off-by: Maxime Ripard Acked-by: Ulf Hansson Acked-by: David Lanzendörfer Reviewed-by: Chen-Yu Tsai Tested-by: Chen-Yu Tsai --- Documentation/devicetree/bindings/mmc/sunxi-mmc.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 91b3a3467150..4bf41d833804 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -10,8 +10,8 @@ Absolute maximum transfer rate is 200MB/s Required properties: - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc" - reg : mmc controller base registers - - clocks : a list with 2 phandle + clock specifier pairs - - clock-names : must contain "ahb" and "mmc" + - clocks : a list with 4 phandle + clock specifier pairs + - clock-names : must contain "ahb", "mmc", "output" and "sample" - interrupts : mmc controller interrupt Optional properties: @@ -25,8 +25,8 @@ Examples: mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>; - clock-names = "ahb", "mod"; + clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; + clock-names = "ahb", "mod", "output", "sample"; interrupts = <0 32 4>; status = "disabled"; }; -- cgit v1.2.1 From ee74b56ab2f72c088fc5a8ba3797ef6a452d692a Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 13 Jan 2015 16:57:41 +0530 Subject: clk: samsung: exynos7: add clocks for SPI block Add clock support for 5 SPI channels. Signed-off-by: Padmavathi Venna Signed-off-by: Sylwester Nawrocki --- Documentation/devicetree/bindings/clock/exynos7-clock.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt index d0e048c08817..9282f71830b4 100644 --- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt @@ -77,6 +77,11 @@ Input clocks for peric1 clock controller: - sclk_uart1 - sclk_uart2 - sclk_uart3 + - sclk_spi0 + - sclk_spi1 + - sclk_spi2 + - sclk_spi3 + - sclk_spi4 Input clocks for peris clock controller: - fin_pll -- cgit v1.2.1 From 9f930a39e135d370d17e7a1ab73ddebcfb896f98 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 13 Jan 2015 16:57:42 +0530 Subject: clk: samsung: exynos7: add clocks for audio block Add required clk support for I2S, PCM and SPDIF. Signed-off-by: Padmavathi Venna Reviewed-by: Vivek Gautam Signed-off-by: Sylwester Nawrocki --- Documentation/devicetree/bindings/clock/exynos7-clock.txt | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt index 9282f71830b4..6bf1e7493f61 100644 --- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt @@ -35,6 +35,7 @@ Required Properties for Clock Controller: - "samsung,exynos7-clock-fsys0" - "samsung,exynos7-clock-fsys1" - "samsung,exynos7-clock-mscl" + - "samsung,exynos7-clock-aud" - reg: physical base address of the controller and the length of memory mapped region. @@ -54,6 +55,7 @@ Input clocks for top0 clock controller: - dout_sclk_bus1_pll - dout_sclk_cc_pll - dout_sclk_mfc_pll + - dout_sclk_aud_pll Input clocks for top1 clock controller: - fin_pll @@ -82,6 +84,9 @@ Input clocks for peric1 clock controller: - sclk_spi2 - sclk_spi3 - sclk_spi4 + - sclk_i2s1 + - sclk_pcm1 + - sclk_spdif Input clocks for peris clock controller: - fin_pll @@ -97,3 +102,7 @@ Input clocks for fsys1 clock controller: - dout_aclk_fsys1_200 - dout_sclk_mmc0 - dout_sclk_mmc1 + +Input clocks for aud clock controller: + - fin_pll + - fout_aud_pll -- cgit v1.2.1 From 0c7665c356021c10c3f45a620f3f12ad599850d5 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 12 Jan 2015 10:20:46 +0300 Subject: clk: TI CDCE706 clock synthesizer driver The driver allows using CDCE706 in its default configuration recorded in EEPROM and adjusting of synthesized clocks by consumers. Signed-off-by: Max Filippov Signed-off-by: Michael Turquette --- .../devicetree/bindings/clock/ti,cdce706.txt | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/ti,cdce706.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt new file mode 100644 index 000000000000..616836e7e1e2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt @@ -0,0 +1,42 @@ +Bindings for Texas Instruments CDCE706 programmable 3-PLL clock +synthesizer/multiplier/divider. + +Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf + +I2C device node required properties: +- compatible: shall be "ti,cdce706". +- reg: i2c device address, shall be in range [0x68...0x6b]. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock + handles, shall be reference clock(s) connected to CLK_IN0 + and CLK_IN1 pins. +- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0 + in case of crystal oscillator or differential signal input + configuration. Use clk_in0 and clk_in1 in case of independent + single-ended LVCMOS inputs configuration. + +Example: + + clocks { + clk54: clk54 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <54000000>; + }; + }; + ... + i2c0: i2c-master@0d090000 { + ... + cdce706: clock-synth@69 { + compatible = "ti,cdce706"; + #clock-cells = <1>; + reg = <0x69>; + clocks = <&clk54>; + clock-names = "clk_in0"; + }; + }; + ... + simple-audio-card,codec { + ... + clocks = <&cdce706 4>; + }; -- cgit v1.2.1 From 61af4d8dceeb179b62cb342f4008ce3774d3d1fd Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 17 Jan 2015 13:19:26 +0800 Subject: clk: sunxi: Add mod0 and mmc module clock support for A80 The module 0 style clocks, or storage module clocks as named in the official SDK, are almost the same as the module 0 clocks on earlier Allwinner SoCs. The only difference is wider mux register bits. As with earlier Allwinner SoCs, mmc module clocks are a special case of mod0 clocks, with phase controls for 2 child clocks, output and sample. This patch adds support for both. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index e4c42276c577..0dfd018ba47b 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -56,7 +56,9 @@ Required properties: "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 "allwinner,sun4i-a10-mmc-clk" - for the MMC clock + "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks + "allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80 "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 @@ -72,7 +74,8 @@ Required properties for all clocks: - #clock-cells : from common clock binding; shall be set to 0 except for the following compatibles where it shall be set to 1: "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk", - "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk" + "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk", + "allwinner,*-usb-clk", "allwinner,*-mmc-clk" - clock-output-names : shall be the corresponding names of the outputs. If the clock module only has one output, the name shall be the module name. @@ -94,7 +97,7 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output is the normal PLL6 output, or "pll6". The second output is rate doubled PLL6, or "pll6x2". -The "allwinner,sun4i-a10-mmc-clk" has three different outputs: the +The "allwinner,*-mmc-clk" clocks have three different outputs: the main clock, with the ID 0, and the output and sample clocks, with the IDs 1 and 2, respectively. -- cgit v1.2.1 From 7a6fca879f59824963cd456d8cc5db24ac5acfc0 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 20 Jan 2015 23:46:31 +0800 Subject: clk: sunxi: Add driver for A80 MMC config clocks/resets On the A80 SoC, the 4 mmc controllers each have a separate register controlling their register access clocks and reset controls. These registers in turn share a ahb clock gate and reset control. This patch adds a platform device driver for these controls. It requires both clocks and reset controls to be available, so using CLK_OF_DECLARE might not be the best way. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi.txt | 25 ++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 0dfd018ba47b..60b44285250d 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -57,6 +57,7 @@ Required properties: "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 "allwinner,sun4i-a10-mmc-clk" - for the MMC clock "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80 + "allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks "allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80 "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 @@ -75,7 +76,8 @@ Required properties for all clocks: the following compatibles where it shall be set to 1: "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk", "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk", - "allwinner,*-usb-clk", "allwinner,*-mmc-clk" + "allwinner,*-usb-clk", "allwinner,*-mmc-clk", + "allwinner,*-mmc-config-clk" - clock-output-names : shall be the corresponding names of the outputs. If the clock module only has one output, the name shall be the module name. @@ -83,6 +85,10 @@ Required properties for all clocks: And "allwinner,*-usb-clk" clocks also require: - reset-cells : shall be set to 1 +The "allwinner,sun9i-a80-mmc-config-clk" clock also requires: +- #reset-cells : shall be set to 1 +- resets : shall be the reset control phandle for the mmc block. + For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate dummy clocks at 25 MHz and 125 MHz, respectively. See example. @@ -101,6 +107,10 @@ The "allwinner,*-mmc-clk" clocks have three different outputs: the main clock, with the ID 0, and the output and sample clocks, with the IDs 1 and 2, respectively. +The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output +per mmc controller. The number of outputs is determined by the size of +the address block, which is related to the overall mmc block. + For example: osc24M: clk@01c20050 { @@ -176,3 +186,16 @@ gmac_clk: clk@01c20164 { clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; clock-output-names = "gmac"; }; + +mmc_config_clk: clk@01c13000 { + compatible = "allwinner,sun9i-a80-mmc-config-clk"; + reg = <0x01c13000 0x10>; + clocks = <&ahb0_gates 8>; + clock-names = "ahb"; + resets = <&ahb0_resets 8>; + reset-names = "ahb"; + #clock-cells = <1>; + #reset-cells = <1>; + clock-output-names = "mmc0_config", "mmc1_config", + "mmc2_config", "mmc3_config"; +}; -- cgit v1.2.1 From 163152cbbe32177154cb6a2832b5c15324669bc1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 13 Jan 2015 14:51:27 -0800 Subject: clk: ti: Add support for FAPLL on dm816x On dm816x the clocks are sourced from a FAPLL (Flying Adder PLL) that does not seem to be used on the other omap variants. There are four instances of the FAPLL on dm816x that each have three to seven child synthesizers. I've set up the FAPLL as a single fapll.c driver. Later on we could potentially have the PLL code generic. To do that, we would have to consider the following: 1. Setting the PLL to bypass mode also sets the child synthesizers into bypass mode. As the bypass rate can also be generated by the PLL in regular mode, there's no way for the child synthesizers to detect the bypass mode based on the parent clock rate. 2. The PLL registers control the power for each of the child syntheriser. Note that the clocks are currently still missing the set_rate implementation so things are still running based on the bootloader values. That's OK for now as most of the outputs have dividers and those can be set using the existing TI component clock code. I have verified that the extclk rates are correct for a few clocks, so adding the set_rate support should be fairly trivial later on. This code is partially based on the TI81XX-LINUX-PSP-04.04.00.02 patches published at: http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html Cc: Brian Hutchinson Cc: Paul Walmsley Cc: Tero Kristo Signed-off-by: Tony Lindgren Signed-off-by: Michael Turquette --- .../devicetree/bindings/clock/ti/fapll.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/ti/fapll.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt new file mode 100644 index 000000000000..c19b3f253b8c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt @@ -0,0 +1,33 @@ +Binding for Texas Instruments FAPLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped FAPLL with usually two selectable input clocks +(reference clock and bypass clock), and one or more child +syntesizers. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,dm816-fapll-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks (clk-ref and clk-bypass) +- reg : address and length of the register set for controlling the FAPLL. + +Examples: + main_fapll: main_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x400 0x40>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>, <5>, + <6>, <7>; + clock-output-names = "main_pll_clk1", + "main_pll_clk2", + "main_pll_clk3", + "main_pll_clk4", + "main_pll_clk5", + "main_pll_clk6", + "main_pll_clk7"; + }; -- cgit v1.2.1 From 93a17c058f610398739c8b930ff3c83a0c0b0120 Mon Sep 17 00:00:00 2001 From: Tang Yuantian Date: Thu, 15 Jan 2015 14:03:41 +0800 Subject: clk: ppc-corenet: rename driver to clk-qoriq Freescale introduced new ARM-based socs which using the compatible clock IP block with PowerPC-based socs'. So this driver can be used on both platforms. Updated relevant descriptions and renamed this driver to better represent its meaning and keep the function of driver untouched. Signed-off-by: Tang Yuantian Signed-off-by: Michael Turquette --- Documentation/devicetree/bindings/clock/qoriq-clock.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 266ff9d23229..df4a259a6898 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -1,6 +1,6 @@ -* Clock Block on Freescale CoreNet Platforms +* Clock Block on Freescale QorIQ Platforms -Freescale CoreNet chips take primary clocking input from the external +Freescale qoriq chips take primary clocking input from the external SYSCLK signal. The SYSCLK input (frequency) is multiplied using multiple phase locked loops (PLL) to create a variety of frequencies which can then be passed to a variety of internal logic, including @@ -29,6 +29,7 @@ Required properties: * "fsl,t4240-clockgen" * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" + * "fsl,ls1021a-clockgen" Chassis clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks -- cgit v1.2.1 From 0489ea9e5c894faa7e5ec690261ee86fa51ea6b8 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 19 Jan 2015 18:05:35 -0800 Subject: devicetree: bindings: Document qcom,lcc Document the LPASS (low power audio subsystem) clock controller found on Qualcomm devices. Cc: Signed-off-by: Rajendra Nayak Signed-off-by: Kumar Gala Signed-off-by: Stephen Boyd Signed-off-by: Michael Turquette --- .../devicetree/bindings/clock/qcom,lcc.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,lcc.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.txt b/Documentation/devicetree/bindings/clock/qcom,lcc.txt new file mode 100644 index 000000000000..dd755be63a01 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,lcc.txt @@ -0,0 +1,21 @@ +Qualcomm LPASS Clock & Reset Controller Binding +------------------------------------------------ + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,lcc-msm8960" + "qcom,lcc-apq8064" + "qcom,lcc-ipq8064" + +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 +- #reset-cells : shall contain 1 + +Example: + clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; -- cgit v1.2.1 From 4ef0f2fded3fedf0786c6c032e210e108c19f19a Mon Sep 17 00:00:00 2001 From: Peter De Schrijver Date: Tue, 16 Dec 2014 12:38:29 -0800 Subject: clk: tegra: Update binding doc for Tegra132 Tegra132 has almost the same clock structure than Tegra124. This patch documents the missing clock IDs. Signed-off-by: Peter De Schrijver [paul@pwsan.com: updated binding documentation to reflect the recent split of Tegra124 clock IDs into a Tegra124/132-common file and a Tegra124-specific file] Signed-off-by: Paul Walmsley Signed-off-by: Paul Walmsley Cc: Stephen Warren Cc: Thierry Reding Cc: Alexandre Courbot Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala --- .../devicetree/bindings/clock/nvidia,tegra124-car.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt index ded5d6212c84..c6620bc96703 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt @@ -1,4 +1,4 @@ -NVIDIA Tegra124 Clock And Reset Controller +NVIDIA Tegra124 and Tegra132 Clock And Reset Controller This binding uses the common clock binding: Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible for muxing and gating Tegra's clocks, and setting their rates. Required properties : -- compatible : Should be "nvidia,tegra124-car" +- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car" - reg : Should contain CAR registers location and length - clocks : Should contain phandle and clock specifiers for two clocks: the 32 KHz "32k_in", and the board-specific oscillator "osc". - #clock-cells : Should be 1. In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - . + CAR. The assignments may be found in the header files + (which covers IDs common + to Tegra124 and Tegra132) and + (for Tegra124-specific clocks). - #reset-cells : Should be 1. In clock consumers, this cell represents the bit number in the CAR's array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. -- cgit v1.2.1