From 7021d1220584ab1e6efd3d59da47b65674d9896a Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Apr 2013 19:31:27 +0800 Subject: ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 29 +++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index b5846e21cc2e..ee529b17cb9f 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -1,9 +1,15 @@ NVIDIA Tegra Power Management Controller (PMC) -Properties: +Required properties: - name : Should be pmc - compatible : Should contain "nvidia,tegra-pmc". - reg : Offset and length of the register set for the device +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must include the following entries: + "pclk" (The Tegra clock of that name), + "clk32k_in" (The 32KHz clock input to Tegra). + +Optional properties: - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. The PMU is an external Power Management Unit, whose interrupt output signal is fed into the PMC. This signal is optionally inverted, and then @@ -12,8 +18,29 @@ Properties: Example: +/ SoC dts including file pmc@7000f400 { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 110>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; nvidia,invert-interrupt; }; + +/ Tegra board dts file +{ + ... + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + ... +}; -- cgit v1.2.1 From 4b51ccbc469facb7b589a71c2a4ae47d3e425d02 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Apr 2013 19:31:46 +0800 Subject: ARM: dt: tegra: add bindings of power management configurations for PMC The PMC mostly controls the entry and exit of the system from different sleep modes. Different platform or system may have different configurations. The power management configurations of PMC is represented as some properties. The system needs to define the properties when the system supports deep sleep mode (i.e. suspend). Cc: Grant Likely Cc: Rob Herring Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index ee529b17cb9f..1608a54e90e1 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -1,5 +1,9 @@ NVIDIA Tegra Power Management Controller (PMC) +The PMC block interacts with an external Power Management Unit. The PMC +mostly controls the entry and exit of the system from different sleep +modes. It provides power-gating controllers for SoC and CPU power-islands. + Required properties: - name : Should be pmc - compatible : Should contain "nvidia,tegra-pmc". @@ -15,6 +19,32 @@ Optional properties: signal is fed into the PMC. This signal is optionally inverted, and then fed into the ARM GIC. The PMC is not involved in the detection or handling of this interrupt signal, merely its inversion. +- nvidia,suspend-mode : The suspend mode that the platform should use. + Valid values are 0, 1 and 2: + 0 (LP0): CPU + Core voltage off and DRAM in self-refresh + 1 (LP1): CPU voltage off and DRAM in self-refresh + 2 (LP2): CPU voltage off +- nvidia,core-power-req-active-high : Boolean, core power request active-high +- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high +- nvidia,combined-power-req : Boolean, combined power request for CPU & Core +- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC) + is enabled. + +Required properties when nvidia,suspend-mode is specified: +- nvidia,cpu-pwr-good-time : CPU power good time in uS. +- nvidia,cpu-pwr-off-time : CPU power off time in uS. +- nvidia,core-pwr-good-time : + Core power good time in uS. +- nvidia,core-pwr-off-time : Core power off time in uS. + +Required properties when nvidia,suspend-mode=<0>: +- nvidia,lp0-vec : Starting address and length of LP0 vector + The LP0 vector contains the warm boot code that is executed by AVP when + resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7 + processor and always being the first boot processor when chip is power on + or resume from deep sleep mode. When the system is resumed from the deep + sleep mode, the warm boot code will restore some PLLs, clocks and then + bring up CPU0 for resuming the system. Example: @@ -25,6 +55,14 @@ pmc@7000f400 { clocks = <&tegra_car 110>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + nvidia,lp0-vec = <0xbdffd000 0x2000>; }; / Tegra board dts file -- cgit v1.2.1