From 17d8bb061fcf8ba6a56adcf193d7d255966cff79 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 7 Jun 2011 20:05:13 -0300 Subject: [media] DocBook/dvbproperty.xml: Reorganize the parameters Put the parameters at the sequencial order as they appear inside the frontend.h header. TODO: fix the per-standard section, to reflect the parameters that should actually be used for each transmission system type. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/dvb/dvbproperty.xml | 681 +++++++++++------------- 1 file changed, 311 insertions(+), 370 deletions(-) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 01f39337e3f7..d8a642475ad8 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -197,8 +197,8 @@ get/set up to 64 properties. The actual meaning of each property is described on DTV_DVBT2_PLP_ID -
- Parameters that are common to all Digital TV standards +
+ Digital TV property parameters
<constant>DTV_UNDEFINED</constant> Used internally. A GET/SET operation for it won't change or return anything. @@ -211,6 +211,20 @@ get/set up to 64 properties. The actual meaning of each property is described on <constant>DTV_CLEAR</constant> Reset a cache of data specific to the frontend here. This does not effect hardware.
+
+ <constant>DTV_FREQUENCY</constant> + + Central frequency of the channel, in HZ. + + Notes: + 1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. + E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of + the channel which is 6MHz. + + 2)As in ISDB-Tsb the channel consists of only one or three segments the + frequency step is 429kHz, 3*429 respectively. As for ISDB-T the + central frequency of the channel is expected. +
<constant>DTV_MODULATION</constant> Specifies the frontend modulation type for cable and satellite types. The modulation can be one of the types bellow: @@ -232,6 +246,32 @@ get/set up to 64 properties. The actual meaning of each property is described on } fe_modulation_t;
+
+ <constant>DTV_BANDWIDTH_HZ</constant> + + Bandwidth for the channel, in HZ. + + Possible values: + 1712000, + 5000000, + 6000000, + 7000000, + 8000000, + 10000000. + + + Notes: + + 1) For ISDB-T it should be always 6000000Hz (6MHz) + 2) For ISDB-Tsb it can vary depending on the number of connected segments + 3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth + for DVB-C depends on the symbol rate + 4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from + other parameters (DTV_ISDBT_SB_SEGMENT_IDX, + DTV_ISDBT_SB_SEGMENT_COUNT). + 5) DVB-T supports 6, 7 and 8MHz. + 6) In addition, DVB-T2 supports 1.172, 5 and 10MHz. +
<constant>DTV_INVERSION</constant> The Inversion field can take one of these values: @@ -338,6 +378,205 @@ typedef enum fe_rolloff { <constant>DTV_FE_CAPABILITY</constant> Currently not implemented.
+
+ <constant>DTV_DELIVERY_SYSTEM</constant> + Specifies the type of Delivery system +
+ fe_delivery_system type + Possible values: + +typedef enum fe_delivery_system { + SYS_UNDEFINED, + SYS_DVBC_ANNEX_AC, + SYS_DVBC_ANNEX_B, + SYS_DVBT, + SYS_DSS, + SYS_DVBS, + SYS_DVBS2, + SYS_DVBH, + SYS_ISDBT, + SYS_ISDBS, + SYS_ISDBC, + SYS_ATSC, + SYS_ATSCMH, + SYS_DMBTH, + SYS_CMMB, + SYS_DAB, + SYS_DVBT2, +} fe_delivery_system_t; + +
+
+
+ <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> + + If DTV_ISDBT_SOUND_BROADCASTING is '0' this bit-field represents whether + the channel is in partial reception mode or not. + + If '1' DTV_ISDBT_LAYERA_* values are assigned to the center segment and + DTV_ISDBT_LAYERA_SEGMENT_COUNT has to be '1'. + + If in addition DTV_ISDBT_SOUND_BROADCASTING is '1' + DTV_ISDBT_PARTIAL_RECEPTION represents whether this ISDB-Tsb channel + is consisting of one segment and layer or three segments and two layers. + + Possible values: 0, 1, -1 (AUTO) +
+
+ <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> + + This field represents whether the other DTV_ISDBT_*-parameters are + referring to an ISDB-T and an ISDB-Tsb channel. (See also + DTV_ISDBT_PARTIAL_RECEPTION). + + Possible values: 0, 1, -1 (AUTO) +
+
+ <constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant> + + This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. + + (Note of the author: This might not be the correct description of the + SUBCHANNEL-ID in all details, but it is my understanding of the technical + background needed to program a device) + + An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a + set of connected ISDB-Tsb channels. In this set of channels every + channel can be received independently. The number of connected + ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum + bandwidth available. + + Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The + broadcaster has several possibilities to put those channels in the + air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8 + segments from position 1-8 to 5-13 or anything in between. + + The underlying layer of segments are subchannels: each segment is + consisting of several subchannels with a predefined IDs. A sub-channel + is used to help the demodulator to synchronize on the channel. + + An ISDB-T channel is always centered over all sub-channels. As for + the example above, in ISDB-Tsb it is no longer as simple as that. + + The DTV_ISDBT_SB_SUBCHANNEL_ID parameter is used to give the + sub-channel ID of the segment to be demodulated. + + Possible values: 0 .. 41, -1 (AUTO) +
+
+ <constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> + This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. + DTV_ISDBT_SB_SEGMENT_IDX gives the index of the segment to be + demodulated for an ISDB-Tsb channel where several of them are + transmitted in the connected manner. + Possible values: 0 .. DTV_ISDBT_SB_SEGMENT_COUNT - 1 + Note: This value cannot be determined by an automatic channel search. +
+
+ <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> + This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. + DTV_ISDBT_SB_SEGMENT_COUNT gives the total count of connected ISDB-Tsb + channels. + Possible values: 1 .. 13 + Note: This value cannot be determined by an automatic channel search. +
+
+ Hierarchical layers + ISDB-T channels can be coded hierarchically. As opposed to DVB-T in + ISDB-T hierarchical layers can be decoded simultaneously. For that + reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders. + ISDB-T has 3 hierarchical layers which each can use a part of the + available segments. The total number of segments over all layers has + to 13 in ISDB-T. +
+ <constant>DTV_ISDBT_LAYER_ENABLED</constant> + Hierarchical reception in ISDB-T is achieved by enabling or disabling + layers in the decoding process. Setting all bits of + DTV_ISDBT_LAYER_ENABLED to '1' forces all layers (if applicable) to be + demodulated. This is the default. + If the channel is in the partial reception mode + (DTV_ISDBT_PARTIAL_RECEPTION = 1) the central segment can be decoded + independently of the other 12 segments. In that mode layer A has to + have a SEGMENT_COUNT of 1. + In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb + according to DTV_ISDBT_PARTIAL_RECEPTION. SEGMENT_COUNT must be filled + accordingly. + Possible values: 0x1, 0x2, 0x4 (|-able) + DTV_ISDBT_LAYER_ENABLED[0:0] - layer A + DTV_ISDBT_LAYER_ENABLED[1:1] - layer B + DTV_ISDBT_LAYER_ENABLED[2:2] - layer C + DTV_ISDBT_LAYER_ENABLED[31:3] unused +
+
+ <constant>DTV_ISDBT_LAYER*_FEC</constant> + Possible values: FEC_AUTO, FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_7_8 +
+
+ <constant>DTV_ISDBT_LAYER*_MODULATION</constant> + Possible values: QAM_AUTO, QPSK, QAM_16, QAM_64, DQPSK + Note: If layer C is DQPSK layer B has to be DQPSK. If layer B is DQPSK + and DTV_ISDBT_PARTIAL_RECEPTION=0 layer has to be DQPSK. +
+
+ <constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant> + Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) + Note: Truth table for DTV_ISDBT_SOUND_BROADCASTING and + DTV_ISDBT_PARTIAL_RECEPTION and LAYER*_SEGMENT_COUNT + + + + + PR + SB + Layer A width + Layer B width + Layer C width + total width + + + 0 + 0 + 1 .. 13 + 1 .. 13 + 1 .. 13 + 13 + + + 1 + 0 + 1 + 1 .. 13 + 1 .. 13 + 13 + + + 0 + 1 + 1 + 0 + 0 + 1 + + + 1 + 1 + 1 + 2 + 0 + 13 + + + + +
+
+ <constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant> + Possible values: 0, 1, 2, 3, -1 (AUTO) + Note: The real inter-leaver depth-names depend on the mode (fft-size); the values + here are referring to what can be found in the TMCC-structure - + independent of the mode. +
+
<constant>DTV_API_VERSION</constant> Returns the major/minor version of the DVB API @@ -384,95 +623,29 @@ typedef enum fe_code_rate { } fe_code_rate_t;
-
- <constant>DTV_HIERARCHY</constant> - Frontend hierarchy - -typedef enum fe_hierarchy { - HIERARCHY_NONE, - HIERARCHY_1, - HIERARCHY_2, - HIERARCHY_4, - HIERARCHY_AUTO - } fe_hierarchy_t; - -
-
- <constant>DTV_ISDBS_TS_ID</constant> - Currently unused. -
-
- <constant>DTV_FREQUENCY</constant> - - Central frequency of the channel, in HZ. - - Notes: - 1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. - E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of - the channel which is 6MHz. - - 2)As in ISDB-Tsb the channel consists of only one or three segments the - frequency step is 429kHz, 3*429 respectively. As for ISDB-T the - central frequency of the channel is expected. -
- -
- <constant>DTV_BANDWIDTH_HZ</constant> - - Bandwidth for the channel, in HZ. - - Possible values: - 1712000, - 5000000, - 6000000, - 7000000, - 8000000, - 10000000. - - - Notes: - - 1) For ISDB-T it should be always 6000000Hz (6MHz) - 2) For ISDB-Tsb it can vary depending on the number of connected segments - 3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth - for DVB-C depends on the symbol rate - 4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from - other parameters (DTV_ISDBT_SB_SEGMENT_IDX, - DTV_ISDBT_SB_SEGMENT_COUNT). - 5) DVB-T supports 6, 7 and 8MHz. - 6) In addition, DVB-T2 supports 1.172, 5 and 10MHz. -
- -
- <constant>DTV_DELIVERY_SYSTEM</constant> - - Specifies the type of Delivery system +
+ <constant>DTV_GUARD_INTERVAL</constant> - Possible values: + Possible values are: -typedef enum fe_delivery_system { - SYS_UNDEFINED, - SYS_DVBC_ANNEX_AC, - SYS_DVBC_ANNEX_B, - SYS_DVBT, - SYS_DSS, - SYS_DVBS, - SYS_DVBS2, - SYS_DVBH, - SYS_ISDBT, - SYS_ISDBS, - SYS_ISDBC, - SYS_ATSC, - SYS_ATSCMH, - SYS_DMBTH, - SYS_CMMB, - SYS_DAB, - SYS_DVBT2, -} fe_delivery_system_t; +typedef enum fe_guard_interval { + GUARD_INTERVAL_1_32, + GUARD_INTERVAL_1_16, + GUARD_INTERVAL_1_8, + GUARD_INTERVAL_1_4, + GUARD_INTERVAL_AUTO, + GUARD_INTERVAL_1_128, + GUARD_INTERVAL_19_128, + GUARD_INTERVAL_19_256, +} fe_guard_interval_t; + Notes: + 1) If DTV_GUARD_INTERVAL is set the GUARD_INTERVAL_AUTO the hardware will + try to find the correct guard interval (if capable) and will use TMCC to fill + in the missing parameters. + 2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present
-
<constant>DTV_TRANSMISSION_MODE</constant> @@ -490,7 +663,6 @@ typedef enum fe_transmit_mode { TRANSMISSION_MODE_32K, } fe_transmit_mode_t; - Notes: 1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K @@ -501,291 +673,60 @@ typedef enum fe_transmit_mode { 3) DVB-T specifies 2K and 8K as valid sizes. 4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.
- -
- <constant>DTV_GUARD_INTERVAL</constant> - - Possible values are: - -typedef enum fe_guard_interval { - GUARD_INTERVAL_1_32, - GUARD_INTERVAL_1_16, - GUARD_INTERVAL_1_8, - GUARD_INTERVAL_1_4, - GUARD_INTERVAL_AUTO, - GUARD_INTERVAL_1_128, - GUARD_INTERVAL_19_128, - GUARD_INTERVAL_19_256, -} fe_guard_interval_t; - - - Notes: - 1) If DTV_GUARD_INTERVAL is set the GUARD_INTERVAL_AUTO the hardware will - try to find the correct guard interval (if capable) and will use TMCC to fill - in the missing parameters. - 2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present +
+ <constant>DTV_HIERARCHY</constant> + Frontend hierarchy + +typedef enum fe_hierarchy { + HIERARCHY_NONE, + HIERARCHY_1, + HIERARCHY_2, + HIERARCHY_4, + HIERARCHY_AUTO + } fe_hierarchy_t; +
-
- -
- ISDB-T frontend - This section describes shortly what are the possible parameters in the Linux - DVB-API called "S2API" and now DVB API 5 in order to tune an ISDB-T/ISDB-Tsb - demodulator: - - This ISDB-T/ISDB-Tsb API extension should reflect all information - needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible - that some very sophisticated devices won't need certain parameters to - tune. - - The information given here should help application writers to know how - to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API. - - The details given here about ISDB-T and ISDB-Tsb are just enough to - basically show the dependencies between the needed parameter values, - but surely some information is left out. For more detailed information - see the following documents: - - ARIB STD-B31 - "Transmission System for Digital Terrestrial - Television Broadcasting" and - ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial - Television Broadcasting". - - In order to read this document one has to have some knowledge the - channel structure in ISDB-T and ISDB-Tsb. I.e. it has to be known to - the reader that an ISDB-T channel consists of 13 segments, that it can - have up to 3 layer sharing those segments, and things like that. - - Parameters used by ISDB-T and ISDB-Tsb. - -
- ISDB-T only parameters - -
- <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> - - If DTV_ISDBT_SOUND_BROADCASTING is '0' this bit-field represents whether - the channel is in partial reception mode or not. - - If '1' DTV_ISDBT_LAYERA_* values are assigned to the center segment and - DTV_ISDBT_LAYERA_SEGMENT_COUNT has to be '1'. - - If in addition DTV_ISDBT_SOUND_BROADCASTING is '1' - DTV_ISDBT_PARTIAL_RECEPTION represents whether this ISDB-Tsb channel - is consisting of one segment and layer or three segments and two layers. - - Possible values: 0, 1, -1 (AUTO) -
- -
- <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> - - This field represents whether the other DTV_ISDBT_*-parameters are - referring to an ISDB-T and an ISDB-Tsb channel. (See also - DTV_ISDBT_PARTIAL_RECEPTION). - - Possible values: 0, 1, -1 (AUTO) -
- -
- <constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant> - - This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. - - (Note of the author: This might not be the correct description of the - SUBCHANNEL-ID in all details, but it is my understanding of the technical - background needed to program a device) - - An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a - set of connected ISDB-Tsb channels. In this set of channels every - channel can be received independently. The number of connected - ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum - bandwidth available. - - Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The - broadcaster has several possibilities to put those channels in the - air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8 - segments from position 1-8 to 5-13 or anything in between. - - The underlying layer of segments are subchannels: each segment is - consisting of several subchannels with a predefined IDs. A sub-channel - is used to help the demodulator to synchronize on the channel. - - An ISDB-T channel is always centered over all sub-channels. As for - the example above, in ISDB-Tsb it is no longer as simple as that. - - The DTV_ISDBT_SB_SUBCHANNEL_ID parameter is used to give the - sub-channel ID of the segment to be demodulated. - - Possible values: 0 .. 41, -1 (AUTO) -
- -
- - <constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> - - This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. - - DTV_ISDBT_SB_SEGMENT_IDX gives the index of the segment to be - demodulated for an ISDB-Tsb channel where several of them are - transmitted in the connected manner. - - Possible values: 0 .. DTV_ISDBT_SB_SEGMENT_COUNT - 1 - - Note: This value cannot be determined by an automatic channel search. -
- -
- <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - - This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. - - DTV_ISDBT_SB_SEGMENT_COUNT gives the total count of connected ISDB-Tsb - channels. - - Possible values: 1 .. 13 - - Note: This value cannot be determined by an automatic channel search. -
- -
- Hierarchical layers - - ISDB-T channels can be coded hierarchically. As opposed to DVB-T in - ISDB-T hierarchical layers can be decoded simultaneously. For that - reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders. - - ISDB-T has 3 hierarchical layers which each can use a part of the - available segments. The total number of segments over all layers has - to 13 in ISDB-T. - -
- <constant>DTV_ISDBT_LAYER_ENABLED</constant> - - Hierarchical reception in ISDB-T is achieved by enabling or disabling - layers in the decoding process. Setting all bits of - DTV_ISDBT_LAYER_ENABLED to '1' forces all layers (if applicable) to be - demodulated. This is the default. - - If the channel is in the partial reception mode - (DTV_ISDBT_PARTIAL_RECEPTION = 1) the central segment can be decoded - independently of the other 12 segments. In that mode layer A has to - have a SEGMENT_COUNT of 1. - - In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb - according to DTV_ISDBT_PARTIAL_RECEPTION. SEGMENT_COUNT must be filled - accordingly. - - Possible values: 0x1, 0x2, 0x4 (|-able) - - DTV_ISDBT_LAYER_ENABLED[0:0] - layer A - DTV_ISDBT_LAYER_ENABLED[1:1] - layer B - DTV_ISDBT_LAYER_ENABLED[2:2] - layer C - DTV_ISDBT_LAYER_ENABLED[31:3] unused -
- -
- <constant>DTV_ISDBT_LAYER*_FEC</constant> - - Possible values: FEC_AUTO, FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_7_8 -
- -
- <constant>DTV_ISDBT_LAYER*_MODULATION</constant> - - Possible values: QAM_AUTO, QPSK, QAM_16, QAM_64, DQPSK - - Note: If layer C is DQPSK layer B has to be DQPSK. If layer B is DQPSK - and DTV_ISDBT_PARTIAL_RECEPTION=0 layer has to be DQPSK. -
- -
- <constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant> - - Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) - - Note: Truth table for DTV_ISDBT_SOUND_BROADCASTING and - DTV_ISDBT_PARTIAL_RECEPTION and LAYER*_SEGMENT_COUNT - - - - - - - PR - SB - Layer A width - Layer B width - Layer C width - total width - - - - 0 - 0 - 1 .. 13 - 1 .. 13 - 1 .. 13 - 13 - - - - 1 - 0 - 1 - 1 .. 13 - 1 .. 13 - 13 - - - - 0 - 1 - 1 - 0 - 0 - 1 - - - - 1 - 1 - 1 - 2 - 0 - 13 - - - - - - -
- -
- <constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant> - - Possible values: 0, 1, 2, 3, -1 (AUTO) - - Note: The real inter-leaver depth-names depend on the mode (fft-size); the values - here are referring to what can be found in the TMCC-structure - - independent of the mode. -
-
+
+ <constant>DTV_ISDBS_TS_ID</constant> + Currently unused.
-
- DVB-T2 parameters - - This section covers parameters that apply only to the DVB-T2 delivery method. DVB-T2 - support is currently in the early stages development so expect this section to grow - and become more detailed with time. - -
- <constant>DTV_DVBT2_PLP_ID</constant> - - DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of - many data types via a single multiplex. The API will soon support this - at which point this section will be expanded. +
+ <constant>DTV_DVBT2_PLP_ID</constant> + DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of + many data types via a single multiplex. The API will soon support this + at which point this section will be expanded. +
+
+ Properties used by each DTV type +
+ ISDB-T frontend + This section describes shortly what are the possible parameters in the Linux + DVB-API called "S2API" and now DVB API 5 in order to tune an ISDB-T/ISDB-Tsb + demodulator: + This ISDB-T/ISDB-Tsb API extension should reflect all information + needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible + that some very sophisticated devices won't need certain parameters to + tune. + The information given here should help application writers to know how + to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API. + The details given here about ISDB-T and ISDB-Tsb are just enough to + basically show the dependencies between the needed parameter values, + but surely some information is left out. For more detailed information + see the following documents: + ARIB STD-B31 - "Transmission System for Digital Terrestrial + Television Broadcasting" and + ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial + Television Broadcasting". + In order to read this document one has to have some knowledge the + channel structure in ISDB-T and ISDB-Tsb. I.e. it has to be known to + the reader that an ISDB-T channel consists of 13 segments, that it can + have up to 3 layer sharing those segments, and things like that. +
+
+ DVB-T2 parameters + This section covers parameters that apply only to the DVB-T2 delivery method. DVB-T2 + support is currently in the early stages development so expect this section to grow + and become more detailed with time.
-- cgit v1.2.1