From 42776c14c69224a75c781852ae4ca9a4811fd075 Mon Sep 17 00:00:00 2001 From: Mircea Caprioru Date: Mon, 2 Sep 2019 16:08:30 +0300 Subject: staging: iio: adc: ad7192: Add system calibration support This patch will add a system calibration attribute for each channel. Using this option the user will have the ability to calibrate each channel for zero scale and full scale. It uses the iio_chan_spec_ext_info and IIO_ENUM to implement the functionality. Signed-off-by: Mircea Caprioru Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 index 74a2873045bf..7627d3be08f5 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 @@ -13,3 +13,27 @@ Description: need to minimize the system current consumption. Reading gives the state of the bridge switch. Writing '1' enables the bridge switch. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Initiates the system calibration procedure. This is done on a + single channel at a time. Write '1' to start the calibration. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Reading returns a list with the possible calibration modes. + There are two available options: + "zero_scale" - calibrate to zero scale + "full_scale" - calibrate to full scale + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Sets up the calibration mode used in the system calibration + procedure. Reading returns the current calibration mode. + Writing sets the system calibration mode. -- cgit v1.2.1