From 26dd8e0291fd699142722632c6588a438d6ef0e4 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 21 Jan 2012 00:15:23 +0900 Subject: percpu: use bitmap_clear Use bitmap_clear rather than clearing individual bits in a memory region. Signed-off-by: Akinobu Mita Acked-by: Christoph Lameter Signed-off-by: Tejun Heo --- mm/percpu-vm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index 12a48a88c0d8..405d331804c3 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -184,8 +184,7 @@ static void pcpu_unmap_pages(struct pcpu_chunk *chunk, page_end - page_start); } - for (i = page_start; i < page_end; i++) - __clear_bit(i, populated); + bitmap_clear(populated, page_start, page_end - page_start); } /** -- cgit v1.2.1 From 810ae3d26507e61d1f7a69e9716443df1ce41449 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 30 Jan 2012 16:15:22 +0000 Subject: ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore Compiled device tree blobs shouldn't be committed in the kernel tree, so ideally git should ignore them. This patch will enable ignoring of any .dtb files which appear in arch/arm/boot/ Signed-off-by: Dave Martin Signed-off-by: Grant Likely --- arch/arm/boot/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore index ce1c5ff746e7..3c79f85975aa 100644 --- a/arch/arm/boot/.gitignore +++ b/arch/arm/boot/.gitignore @@ -3,3 +3,4 @@ zImage xipImage bootpImage uImage +*.dtb -- cgit v1.2.1 From 0b7580ba9d4ac653cf39fa754c21fa36c080e444 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 19 Jan 2012 08:05:21 +0100 Subject: ARM: davinci: map default_queue to edma channels Default queue is expected to be a low-priority queue. This way, long transfers on the default queue started by the codec engine will not cause audio defects. Signed-off-by: Heiko Schocher Signed-off-by: Juha Kuikka Reported-by: Juha Kuikka Acked-by: Rajashekhara, Sudhakar Cc: linux-mmc@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: linux-arm-kernel@lists.infradead.org Cc: Rajashekhara, Sudhakar Cc: Ido Yariv Cc: Sekhar Nori Cc: Wolfgang Denk Cc: Sergei Shtylyov Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dma.c | 6 +----- arch/arm/mach-davinci/include/mach/edma.h | 5 +++++ 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index da90103a313d..fd33919c95d4 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -1508,12 +1508,8 @@ static int __init edma_probe(struct platform_device *pdev) goto fail; } - /* Everything lives on transfer controller 1 until otherwise - * specified. This way, long transfers on the low priority queue - * started by the codec engine will not cause audio defects. - */ for (i = 0; i < edma_cc[j]->num_channels; i++) - map_dmach_queue(j, i, EVENTQ_1); + map_dmach_queue(j, i, info[j]->default_queue); queue_tc_mapping = info[j]->queue_tc_mapping; queue_priority_mapping = info[j]->queue_priority_mapping; diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index 20c77f29bf0f..7e84c906ceff 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -250,6 +250,11 @@ struct edma_soc_info { unsigned n_slot; unsigned n_tc; unsigned n_cc; + /* + * Default queue is expected to be a low-priority queue. + * This way, long transfers on the default queue started + * by the codec engine will not cause audio defects. + */ enum dma_event_q default_queue; /* Resource reservation for other cores */ -- cgit v1.2.1 From 770e2da2aef92e31cd52ed9a8c20cae0e84e9034 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Feb 2012 21:40:59 +0100 Subject: ARM: LPC32xx: Added lpc32xx_defconfig This patch adds a working defconfig for the LPC32XX architecture. It is a general default configuration for the PHY3250 reference board and others based on LPC32XX. Signed-off-by: Roland Stigge Tested-by: Wolfram Sang Acked-by: Kevin Wells Signed-off-by: Olof Johansson --- arch/arm/configs/lpc32xx_defconfig | 145 +++++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 arch/arm/configs/lpc32xx_defconfig diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig new file mode 100644 index 000000000000..fb2088171ca9 --- /dev/null +++ b/arch/arm/configs/lpc32xx_defconfig @@ -0,0 +1,145 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_LPC32XX=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0" +CONFIG_CPU_IDLE=y +CONFIG_FPE_NWFPE=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_MUSEUM_IDS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT25=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_LPC32XX=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_PNX=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_PNX4008_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_LIBUSUAL=y +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_LPC32XX=y +CONFIG_EXT2_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=y -- cgit v1.2.1 From 9862048abfe5fbd134553a8de30cf8767291fb1f Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Feb 2012 21:41:04 +0100 Subject: ARM: LPC32xx: clock.c: warning fix This patch removes the debug warning on local_clk_disable() as done in Kevin Wells' driver update Signed-off-by: Roland Stigge Acked-by: Wolfram Sang Tested-by: Wolfram Sang Acked-by: Kevin Wells Signed-off-by: Olof Johansson --- arch/arm/mach-lpc32xx/clock.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 1e027514096d..39dcbd0e68b2 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -903,8 +903,6 @@ static inline void clk_unlock(void) static void local_clk_disable(struct clk *clk) { - WARN_ON(clk->usecount == 0); - /* Don't attempt to disable clock if it has no users */ if (clk->usecount > 0) { clk->usecount--; -- cgit v1.2.1 From 93d199a13a6fb8db05d851a1afa8bf938a307be4 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Feb 2012 21:41:05 +0100 Subject: ARM: LPC32xx: clock.c: Fix mutex lock issues This patch fixes the mutex issue in clock.c, as done in Kevin Wells' original driver update: In some cases, the clock drivers could grab a mutex twice in an improper context. This patch changes the mutex mechanism to a simple irq lock/unlock mechanism and removes un-needed locks from some functions. (See also git.lpclinux.com) Signed-off-by: Roland Stigge Tested-by: Wolfram Sang Acked-by: Kevin Wells Signed-off-by: Olof Johansson --- arch/arm/mach-lpc32xx/clock.c | 41 +++++++++++------------------------------ 1 file changed, 11 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 39dcbd0e68b2..fef863062a5e 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -97,9 +97,10 @@ #include "clock.h" #include "common.h" +static DEFINE_SPINLOCK(global_clkregs_lock); + static struct clk clk_armpll; static struct clk clk_usbpll; -static DEFINE_MUTEX(clkm_lock); /* * Post divider values for PLLs based on selected register value @@ -891,16 +892,6 @@ static struct clk clk_lcd = { .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, }; -static inline void clk_lock(void) -{ - mutex_lock(&clkm_lock); -} - -static inline void clk_unlock(void) -{ - mutex_unlock(&clkm_lock); -} - static void local_clk_disable(struct clk *clk) { /* Don't attempt to disable clock if it has no users */ @@ -945,10 +936,11 @@ static int local_clk_enable(struct clk *clk) int clk_enable(struct clk *clk) { int ret; + unsigned long flags; - clk_lock(); + spin_lock_irqsave(&global_clkregs_lock, flags); ret = local_clk_enable(clk); - clk_unlock(); + spin_unlock_irqrestore(&global_clkregs_lock, flags); return ret; } @@ -959,9 +951,11 @@ EXPORT_SYMBOL(clk_enable); */ void clk_disable(struct clk *clk) { - clk_lock(); + unsigned long flags; + + spin_lock_irqsave(&global_clkregs_lock, flags); local_clk_disable(clk); - clk_unlock(); + spin_unlock_irqrestore(&global_clkregs_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -970,13 +964,7 @@ EXPORT_SYMBOL(clk_disable); */ unsigned long clk_get_rate(struct clk *clk) { - unsigned long rate; - - clk_lock(); - rate = clk->get_rate(clk); - clk_unlock(); - - return rate; + return clk->get_rate(clk); } EXPORT_SYMBOL(clk_get_rate); @@ -992,11 +980,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate) * the actual rate set as part of the peripheral dividers * instead of high level clock control */ - if (clk->set_rate) { - clk_lock(); + if (clk->set_rate) ret = clk->set_rate(clk, rate); - clk_unlock(); - } return ret; } @@ -1007,15 +992,11 @@ EXPORT_SYMBOL(clk_set_rate); */ long clk_round_rate(struct clk *clk, unsigned long rate) { - clk_lock(); - if (clk->round_rate) rate = clk->round_rate(clk, rate); else rate = clk->get_rate(clk); - clk_unlock(); - return rate; } EXPORT_SYMBOL(clk_round_rate); -- cgit v1.2.1 From 0925d502f30a3957edd28d838f8a6ac31cbcf4f2 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Feb 2012 21:41:00 +0100 Subject: ARM: LPC32XX: Remove broken non-static declaration This patch fixes a GCC compile error ("static declaration follows non-static declaration") for LPC32XX's watchdog, removing the extern declaration since it's not called externally. Signed-off-by: Roland Stigge Acked-by: Wolfram Sang Acked-by: Kevin Wells Signed-off-by: Olof Johansson --- arch/arm/mach-lpc32xx/common.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 4b4e700343c1..75640bfb097f 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -65,7 +65,6 @@ extern u32 clk_get_pclk_div(void); */ extern void lpc32xx_get_uid(u32 devid[4]); -extern void lpc32xx_watchdog_reset(void); extern u32 lpc32xx_return_iram_size(void); /* -- cgit v1.2.1 From 66f32a0b356e2e4a1dc98766d50316e3315e3405 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Feb 2012 21:41:01 +0100 Subject: ARM: LPC32xx: clock.c: Missing header file This patch fixes the compiler warnings regarding the EXPORT_SYMBOL usage Signed-off-by: Roland Stigge Acked-by: Wolfram Sang Acked-by: Kevin Wells Signed-off-by: Olof Johansson --- arch/arm/mach-lpc32xx/clock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index fef863062a5e..09dfa490a218 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -82,6 +82,7 @@ * will also impact the individual peripheral rates. */ +#include #include #include #include -- cgit v1.2.1 From 2efee387dc7c3a6cca92f6e9250a464ae3f8aec8 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Feb 2012 21:41:02 +0100 Subject: ARM: LPC32xx: clock.c: jiffies wrapping This patch fixes the jiffies wrapping bug in clock.c. It corrects the timeout computation based on jiffies, uses time_before() for correct wrapping handling and replaces a binary "&" which should really be a logical "&&" in a truth expression. Signed-off-by: Roland Stigge Acked-by: Wolfram Sang Tested-by: Wolfram Sang Acked-by: Kevin Wells Signed-off-by: Olof Johansson --- arch/arm/mach-lpc32xx/clock.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 09dfa490a218..6a15e3655a57 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -129,7 +129,7 @@ static struct clk osc_32KHz = { static int local_pll397_enable(struct clk *clk, int enable) { u32 reg; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); @@ -144,7 +144,7 @@ static int local_pll397_enable(struct clk *clk, int enable) /* Wait for PLL397 lock */ while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && - (timeout > jiffies)) + time_before(jiffies, timeout)) cpu_relax(); if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & @@ -158,7 +158,7 @@ static int local_pll397_enable(struct clk *clk, int enable) static int local_oscmain_enable(struct clk *clk, int enable) { u32 reg; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); @@ -173,7 +173,7 @@ static int local_oscmain_enable(struct clk *clk, int enable) /* Wait for main oscillator to start */ while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && - (timeout > jiffies)) + time_before(jiffies, timeout)) cpu_relax(); if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & @@ -385,7 +385,7 @@ static int local_usbpll_enable(struct clk *clk, int enable) { u32 reg; int ret = -ENODEV; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); @@ -398,7 +398,7 @@ static int local_usbpll_enable(struct clk *clk, int enable) __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); /* Wait for PLL lock */ - while ((timeout > jiffies) & (ret == -ENODEV)) { + while (time_before(jiffies, timeout) && (ret == -ENODEV)) { reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) ret = 0; -- cgit v1.2.1 From 2cfd42b2ac29132563c145e7c6f93bce6bc0e131 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Feb 2012 21:41:03 +0100 Subject: ARM: LPC32xx: clock.c: Clock registration fixes This patch adjusts the clock registration list, ported from the latest version of Kevin Wells' latest version of clock.c: i2s0_ck, i2s1_ck and dev:mmc0 have NULL pointers associated as the .dev_id and .con_id, respectively. The old values were not useful. Signed-off-by: Roland Stigge Acked-by: Kevin Wells Signed-off-by: Olof Johansson --- arch/arm/mach-lpc32xx/clock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 6a15e3655a57..0e01bf44479c 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -1055,10 +1055,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1) _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan) _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) - _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) - _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) + _REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0) + _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1) _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) - _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc) + _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc) _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd) -- cgit v1.2.1 From f53e29fc87b6fb76db0043202ec2c3450caa5ff3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 13 Feb 2012 14:24:05 +1100 Subject: md/raid1: fix buglet in md_raid1_contested. Since we added 'replacement' capability, RAID1 can have twice as many devices as ->raid_disks indicates. So md_raid1_congested needs to check that many possible devices, not just ->raid_disks many. Signed-off-by: NeilBrown --- drivers/md/raid1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a368db2431a5..a0b225eb4ac4 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -624,7 +624,7 @@ int md_raid1_congested(struct mddev *mddev, int bits) return 1; rcu_read_lock(); - for (i = 0; i < conf->raid_disks; i++) { + for (i = 0; i < conf->raid_disks * 2; i++) { struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags)) { struct request_queue *q = bdev_get_queue(rdev->bdev); -- cgit v1.2.1 From a5ab6291b1fc73e0dc71caf2eaa0de1de7b11aaa Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Feb 2012 09:52:29 +0000 Subject: Fix section mismatch in spi-pl022.c WARNING: drivers/spi/built-in.o(.devinit.text+0xdb8): Section mismatch in reference from the function pl022_probe() to the function .init.text:pl022_dma_probe() The function __devinit pl022_probe() references a function __init pl022_dma_probe(). If pl022_dma_probe is only used by pl022_probe then annotate pl022_dma_probe with a matching annotation. Signed-off-by: Russell King Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 2f9cb43a2398..f37ad2271ad5 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1083,7 +1083,7 @@ err_alloc_rx_sg: return -ENOMEM; } -static int __init pl022_dma_probe(struct pl022 *pl022) +static int __devinit pl022_dma_probe(struct pl022 *pl022) { dma_cap_mask_t mask; -- cgit v1.2.1 From fae8cc5ed0714953b1ad7cf86f030d2177278424 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 14 Feb 2012 11:10:10 +1100 Subject: md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown --- drivers/md/raid10.c | 37 +++++++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 10 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 6e8aa213f0d5..bd06ea21756c 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -67,6 +67,7 @@ static int max_queued_requests = 1024; static void allow_barrier(struct r10conf *conf); static void lower_barrier(struct r10conf *conf); +static int enough(struct r10conf *conf, int ignore); static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data) { @@ -347,6 +348,19 @@ static void raid10_end_read_request(struct bio *bio, int error) * wait for the 'master' bio. */ set_bit(R10BIO_Uptodate, &r10_bio->state); + } else { + /* If all other devices that store this block have + * failed, we want to return the error upwards rather + * than fail the last device. Here we redefine + * "uptodate" to mean "Don't want to retry" + */ + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); + if (!enough(conf, rdev->raid_disk)) + uptodate = 1; + spin_unlock_irqrestore(&conf->device_lock, flags); + } + if (uptodate) { raid_end_bio_io(r10_bio); rdev_dec_pending(rdev, conf->mddev); } else { @@ -2052,6 +2066,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 "md/raid10:%s: %s: Failing raid device\n", mdname(mddev), b); md_error(mddev, conf->mirrors[d].rdev); + r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED; return; } @@ -2105,8 +2120,11 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 rdev, r10_bio->devs[r10_bio->read_slot].addr + sect, - s, 0)) + s, 0)) { md_error(mddev, rdev); + r10_bio->devs[r10_bio->read_slot].bio + = IO_BLOCKED; + } break; } @@ -2299,17 +2317,20 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio) * This is all done synchronously while the array is * frozen. */ + bio = r10_bio->devs[slot].bio; + bdevname(bio->bi_bdev, b); + bio_put(bio); + r10_bio->devs[slot].bio = NULL; + if (mddev->ro == 0) { freeze_array(conf); fix_read_error(conf, mddev, r10_bio); unfreeze_array(conf); - } + } else + r10_bio->devs[slot].bio = IO_BLOCKED; + rdev_dec_pending(rdev, mddev); - bio = r10_bio->devs[slot].bio; - bdevname(bio->bi_bdev, b); - r10_bio->devs[slot].bio = - mddev->ro ? IO_BLOCKED : NULL; read_more: rdev = read_balance(conf, r10_bio, &max_sectors); if (rdev == NULL) { @@ -2318,13 +2339,10 @@ read_more: mdname(mddev), b, (unsigned long long)r10_bio->sector); raid_end_bio_io(r10_bio); - bio_put(bio); return; } do_sync = (r10_bio->master_bio->bi_rw & REQ_SYNC); - if (bio) - bio_put(bio); slot = r10_bio->read_slot; printk_ratelimited( KERN_ERR @@ -2360,7 +2378,6 @@ read_more: mbio->bi_phys_segments++; spin_unlock_irq(&conf->device_lock); generic_make_request(bio); - bio = NULL; r10_bio = mempool_alloc(conf->r10bio_pool, GFP_NOIO); -- cgit v1.2.1 From 2261cc627f5453004042b4f694612edae27e492e Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 15 Feb 2012 10:47:42 -0800 Subject: dt: add empty of_find_compatible_node function Add empty of_find_compatible_node function for !CONFIG_OF build. Signed-off-by: Shawn Guo Signed-off-by: Grant Likely --- include/linux/of.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/linux/of.h b/include/linux/of.h index a75a831e2057..92cf6ad35e0e 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -281,6 +281,14 @@ static inline struct property *of_find_property(const struct device_node *np, return NULL; } +static inline struct device_node *of_find_compatible_node( + struct device_node *from, + const char *type, + const char *compat) +{ + return NULL; +} + static inline int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz) -- cgit v1.2.1 From 747303a383d59a4d4667152fb68293dd9ff06438 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 16 Feb 2012 15:51:28 +0100 Subject: arm: lpc32xx: phy3250: add rtc & touch device Signed-off-by: Wolfram Sang Acked-by: Roland Stigge Cc: Olof Johansson Signed-off-by: Olof Johansson --- arch/arm/mach-lpc32xx/phy3250.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bfee5b455105..945a2f24d5e9 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -271,6 +271,8 @@ static struct platform_device lpc32xx_gpio_led_device = { }; static struct platform_device *phy3250_devs[] __initdata = { + &lpc32xx_rtc_device, + &lpc32xx_tsc_device, &lpc32xx_i2c0_device, &lpc32xx_i2c1_device, &lpc32xx_i2c2_device, -- cgit v1.2.1 From aa12242f19312b2c60399bd581929fdfc511a017 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Mon, 20 Feb 2012 16:13:43 +0100 Subject: mfd: wm8350 variable dereferenced before check Remove "wm8350->irq_base = pdata->irq_base" to avoid null pointer exception and wm8350->irq_base got from irq_alloc_descs(). Signed-off-by: Jonghwan Choi Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-irq.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index 8a1fafd0bf7d..9fd01bf63c51 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -496,7 +496,6 @@ int wm8350_irq_init(struct wm8350 *wm8350, int irq, mutex_init(&wm8350->irq_lock); wm8350->chip_irq = irq; - wm8350->irq_base = pdata->irq_base; if (pdata && pdata->irq_base > 0) irq_base = pdata->irq_base; -- cgit v1.2.1 From 4a55320117e2ca4ed9002a365d7e209d73abcdf1 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Mon, 16 Jan 2012 09:08:42 +0900 Subject: mfd: Fix possible s5m null pointer dereference This patch checks for pdata to using it. Signed-off-by: Jonghwan Choi Signed-off-by: Samuel Ortiz --- drivers/mfd/s5m-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/s5m-core.c b/drivers/mfd/s5m-core.c index e075c113eec6..caadabeed8e9 100644 --- a/drivers/mfd/s5m-core.c +++ b/drivers/mfd/s5m-core.c @@ -105,7 +105,7 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, s5m87xx->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR); i2c_set_clientdata(s5m87xx->rtc, s5m87xx); - if (pdata->cfg_pmic_irq) + if (pdata && pdata->cfg_pmic_irq) pdata->cfg_pmic_irq(); s5m_irq_init(s5m87xx); -- cgit v1.2.1 From 0a35ee4783975b7238e20044445962fb4fe82cf5 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 18 Jan 2012 20:19:16 +0530 Subject: mfd: Initialize tps65910 irq platform data properly irq_base of the tps65910 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Laxman Dewangan Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65910.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 01cf5012a08f..4392f6bca156 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -168,7 +168,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, goto err; init_data->irq = pmic_plat_data->irq; - init_data->irq_base = pmic_plat_data->irq; + init_data->irq_base = pmic_plat_data->irq_base; tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base); -- cgit v1.2.1 From dfe981ffb987f8702c91d652921f3d1cf9e9b85e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 15 Jan 2012 21:07:35 +0100 Subject: MIPS: BMIPS: smp-bmips.c does not need to include version.h As 'make versioncheck' nicely points out, arch/mips/kernel/smp-bmips.c has no need to '#include '. This patch removes the unneeded include. Signed-off-by: Jesper Juhl Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Kevin Cernekee Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3269/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-bmips.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 58fe71afd879..d5e950ab8527 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -8,7 +8,6 @@ * SMP support for BMIPS */ -#include #include #include #include -- cgit v1.2.1 From 35d1a455b987e6a3768370f05eeced8908e77bcc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 16 Jan 2012 12:38:05 +0100 Subject: MIPS: Remove temporary kludge from Signed-off-by: Ralf Baechle --- arch/mips/include/asm/page.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index d41790928c64..da9bd7d270d1 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -39,9 +39,6 @@ #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) #else /* !CONFIG_HUGETLB_PAGE */ -# ifndef BUILD_BUG -# define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0) -# endif #define HPAGE_SHIFT ({BUILD_BUG(); 0; }) #define HPAGE_SIZE ({BUILD_BUG(); 0; }) #define HPAGE_MASK ({BUILD_BUG(); 0; }) -- cgit v1.2.1 From 3624919c24227e56c9d9717a5c86e077a2570cf3 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 14 Jan 2012 10:44:15 +0100 Subject: MIPS: Alchemy: Update Au1300 inlined GPIO macros Add a few missing macros for the inlined (!CONFIG_GPIOLIB) GPIO case. Fixes a build failure in the mmc core due to missing gpio_request_one() function: mmc/core/cd-gpio.c: In function 'mmc_cd_gpio_request': mmc/core/cd-gpio.c:43:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration] Signed-off-by: Manuel Lauss Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3268/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/gpio-au1300.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h index 556e1be20bf6..fb9975c74c57 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -11,6 +11,9 @@ #include #include +struct gpio; +struct gpio_chip; + /* with the current GPIC design, up to 128 GPIOs are possible. * The only implementation so far is in the Au1300, which has 75 externally * available GPIOs. @@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label) return 0; } -static inline void gpio_free(unsigned int gpio) +static inline int gpio_request_one(unsigned gpio, + unsigned long flags, const char *label) +{ + return 0; +} + +static inline int gpio_request_array(struct gpio *array, size_t num) +{ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +static inline void gpio_free_array(struct gpio *array, size_t num) { } -- cgit v1.2.1 From 193fb42613ec8d96bcb645cf717e949821ff07a7 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 10 Jan 2012 21:11:56 +0900 Subject: MIPS: txx9 7segled fix struct device has no member arch/mips/txx9/generic/7segled.c: In function 'tx_7segled_init_sysfs': arch/mips/txx9/generic/7segled.c:105:6: error: 'struct device' has no member named 'dev' make[3]: *** [arch/mips/txx9/generic/7segled.o] Error 1 Signed-off-by: Yoichi Yuasa Cc: Greg Kroah-Hartman Cc: Kay Sievers Cc: linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/3250/ Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/7segled.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c index 8e93b2122524..4642f56e70e5 100644 --- a/arch/mips/txx9/generic/7segled.c +++ b/arch/mips/txx9/generic/7segled.c @@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void) break; } dev->id = i; - dev->dev = &tx_7segled_subsys; + dev->bus = &tx_7segled_subsys; error = device_register(dev); if (!error) { device_create_file(dev, &dev_attr_ascii); -- cgit v1.2.1 From 8e3657903589f5a5a36a95f660a33e137b3da6f5 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 20 Dec 2011 17:37:29 +0100 Subject: MIPS: Alchemy: Increase minimum timeout for 32kHz timer. Since a clocksource change post 3.2-rc1, tasks on my DB1500 board hang after random amounts of time (from a few minutes to a few hours), regardless of load. Debugging showed that the compare-match register value is a few seconds lower than the current counter value. The minimum value of 8 was initialy determined by a trial-and-error approach. Currently it is sufficient for all Alchemys (without PCI apparently), independent of CPU clock; only the DB1500 and DB1550 boards experience these timer-related tasks hangs now. This patch increases the minimum timeout by 1 (to 9 counter ticks) which seems sufficient since the systems are still working perfectly fine after over 24 hours. Signed-off-by: Manuel Lauss Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3214/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 7da4d0081487..a7193ae13a5d 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int) cd->shift = 32; cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift); cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd); - cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */ + cd->min_delta_ns = clockevent_delta2ns(9, cd); /* ~0.28ms */ clockevents_register_device(cd); setup_irq(m2int, &au1x_rtcmatch2_irqaction); -- cgit v1.2.1 From 58a7fca67a9a6c7dccff727f16826f811ca59127 Mon Sep 17 00:00:00 2001 From: Tony Wu Date: Thu, 22 Dec 2011 22:53:17 +0800 Subject: MIPS: vmlinux.lds.S: remove duplicate _sdata symbol _sdata is defined twice in vmlinux.lds.S. According to vmlinux.ld.h in asm-generic, _sdata should be marked at the beginning RO_DATA_SECTION. * _sdata = .; * RO_DATA_SECTION(PAGE_SIZE) * RW_DATA_SECTION(...) * _edata = .; Remove the one that is marked at RW_DATA_SECTION. Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3215/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/vmlinux.lds.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index a81176f44c74..924da5eb7031 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -69,7 +69,6 @@ SECTIONS RODATA /* writeable */ - _sdata = .; /* Start of data section */ .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ -- cgit v1.2.1 From 43ca4957a15a120d0822a60a22998dbb41bbf075 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Fri, 23 Dec 2011 16:52:42 +0530 Subject: MIPS: fault.c: Port OOM changes to do_page_fault Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to MIPS. Without these changes, my MIPS board encounters many hang and livelock scenarios. After applying this patch, OOM feature performance improves according to my testing. Signed-off-by: Mohd. Faris Signed-off-by: Kautuk Consul Cc: Ingo Molnar Cc: Peter Zijlstra Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3217/ Signed-off-by: Ralf Baechle --- arch/mips/mm/fault.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-) diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 937cf3368164..69ebd586d7ff 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ const int field = sizeof(unsigned long) * 2; siginfo_t info; int fault; + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (write ? FAULT_FLAG_WRITE : 0); #if 0 printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(), @@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ if (in_atomic() || !mm) goto bad_area_nosemaphore; +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,7 +147,11 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) @@ -153,12 +160,27 @@ good_area: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) { - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address); - tsk->maj_flt++; - } else { - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address); - tsk->min_flt++; + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, + regs, address); + tsk->maj_flt++; + } else { + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, + regs, address); + tsk->min_flt++; + } + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* + * No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } } up_read(&mm->mmap_sem); -- cgit v1.2.1 From f79eaeb108499e10fa604103737e7273404e76a4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 16 Dec 2011 15:31:39 -0700 Subject: MIPS: PCI: use list_for_each_entry() for bus->devices traversal Replace open-coded list traversal with list_for_each_entry(). Signed-off-by: Bjorn Helgaas Cc: linux-pci@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3200/ Signed-off-by: Ralf Baechle --- arch/mips/pci/pci.c | 5 +---- arch/mips/pmc-sierra/yosemite/ht-irq.c | 10 ---------- 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index aec2b111d35b..15521505ebe8 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { /* Propagate hose info into the subordinate devices. */ - struct list_head *ln; struct pci_dev *dev = bus->self; if (pci_probe_only && dev && @@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) pcibios_fixup_device_resources(dev, bus); } - for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { - dev = pci_dev_b(ln); - + list_for_each_entry(dev, &bus->devices, bus_list) { if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) pcibios_fixup_device_resources(dev, bus); } diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c index 86b98e98fb4f..62ead6601c69 100644 --- a/arch/mips/pmc-sierra/yosemite/ht-irq.c +++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c @@ -35,16 +35,6 @@ */ void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus) { - struct pci_bus *current_bus = bus; - struct pci_dev *devices; - struct list_head *devices_link; - - list_for_each(devices_link, &(current_bus->devices)) { - devices = pci_dev_b(devices_link); - if (devices == NULL) - continue; - } - /* * PLX and SPKT related changes go here */ -- cgit v1.2.1 From 87b43457f896975ba2aca1a611c018b3429a7b19 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 11 Dec 2011 16:11:41 +0100 Subject: MIPS: ATH79: Avoid a kernel bug on AR913X Wireless mac registration causes a BUG on AR913X SoCs due to a missing 'else'. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3182/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/dev-wmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c index 24f546985b69..e21507052066 100644 --- a/arch/mips/ath79/dev-wmac.c +++ b/arch/mips/ath79/dev-wmac.c @@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data) { if (soc_is_ar913x()) ar913x_wmac_setup(); - if (soc_is_ar933x()) + else if (soc_is_ar933x()) ar933x_wmac_setup(); else BUG(); -- cgit v1.2.1 From 410e512925e4a0eef6ff26c7375f7b888e52d404 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 15:02:46 -0500 Subject: MIPS: Netlogic: Fix defconfigs for coverage builds The toolchain prefix will most likely be site specific and is not guaranteed to always be "mips-linux-gnu-", so simply don't specify one. A quick "git grep" shows this to be consistent amongst other cross compiled targets. Similarly, the site specific initramfs source location should not be used, since that won't exist for most people, and it prevents them from doing coverage builds on the defconfigs, such as those done in linux-next and run routinely by many others. Signed-off-by: Paul Gortmaker Cc: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3296/ Signed-off-by: Ralf Baechle --- arch/mips/configs/nlm_xlp_defconfig | 4 ++-- arch/mips/configs/nlm_xlr_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig index 4479fd669ac1..28c6b276c216 100644 --- a/arch/mips/configs/nlm_xlp_defconfig +++ b/arch/mips/configs/nlm_xlp_defconfig @@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y # CONFIG_SECCOMP is not set CONFIG_USE_OF=y CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="mips-linux-gnu-" +CONFIG_CROSS_COMPILE="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -22,7 +22,7 @@ CONFIG_AUDIT=y CONFIG_CGROUPS=y CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp" +CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_INITRAMFS_COMPRESSION_LZMA=y diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig index 7c68666fdd64..d0b857d98c91 100644 --- a/arch/mips/configs/nlm_xlr_defconfig +++ b/arch/mips/configs/nlm_xlr_defconfig @@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_KEXEC=y CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="mips-linux-gnu-" +CONFIG_CROSS_COMPILE="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -22,7 +22,7 @@ CONFIG_AUDIT=y CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr" +CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_INITRAMFS_COMPRESSION_GZIP=y -- cgit v1.2.1 From d7eb0922b95080c37cae6b94937c0750b227e320 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 23 Jan 2012 14:58:56 +0100 Subject: MIPS: PowerTV: Fix defconfigs for coverage builds The toolchain prefix is most likely be site specific and is not guaranteed to always be "mips-linux-gnu-", so simply don't specify one. A quick "git grep" shows this to be consistent amongst other cross compiled targets. Signed-off-by: Ralf Baechle --- arch/mips/configs/powertv_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig index 3b0b6e8c8533..7fda0ce5f692 100644 --- a/arch/mips/configs/powertv_defconfig +++ b/arch/mips/configs/powertv_defconfig @@ -6,7 +6,7 @@ CONFIG_HZ_1000=y CONFIG_PREEMPT=y # CONFIG_SECCOMP is not set CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="mips-linux-" +CONFIG_CROSS_COMPILE="" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=16 -- cgit v1.2.1 From f232c7e8294372f8c2bee719b1593f3fa7fa9cfa Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Wed, 8 Feb 2012 21:53:14 +0900 Subject: MIPS: traps.c: Fix typo Correct spelling of "Schedulier" to "Scheduler" in arch/mips/kernel/traps.c Signed-off-by: Masanari Iida Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3354/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cc4a3f120f54..d79ae5437b58 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs) printk(KERN_DEBUG "YIELD Scheduler Exception\n"); break; case 5: - printk(KERN_DEBUG "Gating Storage Schedulier Exception\n"); + printk(KERN_DEBUG "Gating Storage Scheduler Exception\n"); break; default: printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n", -- cgit v1.2.1 From 993e4fbd7822cdf874fcf9f1b054a323d67ccf97 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 20 Feb 2012 09:43:29 -0800 Subject: ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register} Expose omap_device_{alloc, delete, register} so we can use them outside of omap_device.c. This approach allows users, which need to manipulate an archdata member of a device before it is registered, to do so. This is also useful for users who have their devices created very early so they can be used at ->reserve() time to reserve CMA memory. The immediate use case for this is to set the private iommu archdata member, which binds a device to its associated iommu controller. This way, generic code will be able to attach omap devices to their iommus, without calling any omap-specific API. With this in hand, we can further clean the existing mainline OMAP iommu driver and its mainline users, and focus on generic IOMMU approaches for future users (rpmsg/remoteproc and the upcoming generic DMA API). This patch is still considered an interim solution until DT fully materializes for omap; at that point, this functionality will be removed as DT will take care of creating the devices and configuring them correctly. Tested on OMAP4 with a generic rpmsg/remoteproc that doesn't use any omap-specific IOMMU API anymore. Signed-off-by: Ohad Ben-Cohen Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/omap_device.h | 7 +++++++ arch/arm/plat-omap/omap_device.c | 13 +++---------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 51423d2727a5..05f7615b61f0 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -100,6 +100,13 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); +struct omap_device *omap_device_alloc(struct platform_device *pdev, + struct omap_hwmod **ohs, int oh_cnt, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt); +void omap_device_delete(struct omap_device *od); +int omap_device_register(struct platform_device *pdev); + void __iomem *omap_device_get_rt_va(struct omap_device *od); struct device *omap_device_get_by_hwmod_name(const char *oh_name); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index e8d98693d2dd..f72fafc9e9f4 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -97,14 +97,7 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 -static int omap_device_register(struct platform_device *pdev); static int omap_early_device_register(struct platform_device *pdev); -static struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); -static void omap_device_delete(struct omap_device *od); - static struct omap_device_pm_latency omap_default_latency[] = { { @@ -509,7 +502,7 @@ static int omap_device_fill_resources(struct omap_device *od, * * Returns an struct omap_device pointer or ERR_PTR() on error; */ -static struct omap_device *omap_device_alloc(struct platform_device *pdev, +struct omap_device *omap_device_alloc(struct platform_device *pdev, struct omap_hwmod **ohs, int oh_cnt, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt) @@ -591,7 +584,7 @@ oda_exit1: return ERR_PTR(ret); } -static void omap_device_delete(struct omap_device *od) +void omap_device_delete(struct omap_device *od) { if (!od) return; @@ -817,7 +810,7 @@ static struct dev_pm_domain omap_device_pm_domain = { * platform_device_register() on the underlying platform_device. * Returns the return value of platform_device_register(). */ -static int omap_device_register(struct platform_device *pdev) +int omap_device_register(struct platform_device *pdev) { pr_debug("omap_device: %s: registering\n", pdev->name); -- cgit v1.2.1 From 3b972bf06c22f5abfa6586a8baf50321cd825965 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 20 Feb 2012 09:43:29 -0800 Subject: ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins Otherwise omap_device_build() and omap_mux related functions can't be marked as __init when twl is build as a module. If a board is using GPIO pins or regulators configured by an external chip, such as TWL PMIC on I2C bus, the board must mark those MMC controllers as deferred. Additionally both omap_hsmmc_init() and omap_hsmmc_late_init() must be called by the board. For MMC controllers using internal GPIO pins for card detect and regulators the slots don't need to be marked deferred. In this case calling omap_hsmmc_init() is sufficient. Only mark the MMC slots using gpio_cd or gpio_wd as deferred as noted by Igor Grinberg . Note that this patch does not change the behaviour for board-4430sdp.c board-omap4panda.c. These boards wrongly rely on the omap_hsmmc.c init function callback to configure the PMIC GPIO interrupt lines on external chip. If the PMIC interrupt lines are not configured during init, they will fail. Reported-by: Russell King Signed-off-by: Rajendra Nayak Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 5 +- arch/arm/mach-omap2/board-4430sdp.c | 4 +- arch/arm/mach-omap2/board-am3517evm.c | 2 +- arch/arm/mach-omap2/board-cm-t35.c | 5 +- arch/arm/mach-omap2/board-devkit8000.c | 4 +- arch/arm/mach-omap2/board-igep0020.c | 6 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 4 +- arch/arm/mach-omap2/board-omap3evm.c | 4 +- arch/arm/mach-omap2/board-omap3logic.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 5 +- arch/arm/mach-omap2/board-omap3stalker.c | 12 +-- arch/arm/mach-omap2/board-omap3touchbook.c | 4 +- arch/arm/mach-omap2/board-omap4panda.c | 4 +- arch/arm/mach-omap2/board-overo.c | 3 +- arch/arm/mach-omap2/board-rm680.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 4 +- arch/arm/mach-omap2/hsmmc.c | 119 +++++++++++++++++++++------ arch/arm/mach-omap2/hsmmc.h | 12 ++- 21 files changed, 150 insertions(+), 57 deletions(-) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 7370983f809f..c8bda62900d8 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -279,7 +279,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 383717ba63b9..da75f239873e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -232,11 +232,13 @@ static struct omap2_hsmmc_info mmc[] = { */ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 4, + .deferred = true, }, { .mmc = 2, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 7, + .deferred = true, }, {} /* Terminator */ }; @@ -249,7 +251,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev, */ mmc[0].gpio_cd = gpio + 0; mmc[1].gpio_cd = gpio + 1; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); @@ -606,6 +608,7 @@ static void __init omap_3430sdp_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); + omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 4e9071589bfb..09ae257e86fd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -491,9 +491,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) { struct omap2_hsmmc_info *c; - omap2_hsmmc_init(controllers); + omap_hsmmc_init(controllers); for (c = controllers; c->mmc; c++) - omap4_twl6030_hsmmc_set_late_init(c->dev); + omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); return 0; } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4b1cfe32e6ba..71138a1271d8 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -504,7 +504,7 @@ static void __init am3517_evm_init(void) am3517_evm_musb_init(); /* MMC init function */ - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index d73316ed4207..49e64057cb67 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -413,7 +413,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, - + .deferred = true, }, { .mmc = 2, @@ -471,7 +471,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); return 0; } @@ -639,6 +639,7 @@ static void __init cm_t3x_common_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); + omap_hsmmc_init(mmc); cm_t35_init_i2c(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e873063f4fda..11cd2a806093 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, + .deferred = true, }, {} /* Terminator */ }; @@ -228,7 +229,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -636,6 +637,7 @@ static void __init devkit8000_init(void) omap_dm9000_init(); + omap_hsmmc_init(mmc); devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index a59ace0ed560..e558800adfdf 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -295,6 +295,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .deferred = true, }, #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) { @@ -402,7 +403,7 @@ static int igep_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) @@ -639,6 +640,9 @@ static void __init igep_init(void) /* Get IGEP2 hardware revision */ igep2_get_revision(); + + omap_hsmmc_init(mmc); + /* Register I2C busses and drivers */ igep_i2c_init(); platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2d2a61f7dcbf..b5bc9b2e2862 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -424,7 +424,7 @@ static void __init omap_ldp_init(void) board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); ldp_display_init(); } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7ffcd2839e7b..78bfcd5d5a78 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -253,6 +253,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, + .deferred = true, }, {} /* Terminator */ }; @@ -277,7 +278,7 @@ static int beagle_twl_gpio_setup(struct device *dev, mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active @@ -521,6 +522,7 @@ static void __init omap3_beagle_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); + omap_hsmmc_init(mmc); omap3_beagle_i2c_init(); gpio_buttons[0].gpio = beagle_config.usr_button_gpio; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c775bead1497..3d585b81669a 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -317,6 +317,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 63, + .deferred = true, }, #ifdef CONFIG_WL12XX_PLATFORM_DATA { @@ -363,7 +364,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * Most GPIOs are for USB OTG. Some are mostly sent to @@ -644,6 +645,7 @@ static void __init omap3_evm_init(void) omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + omap_hsmmc_init(mmc); omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4198dd017d8f..2304ba340e99 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -128,7 +128,7 @@ static void __init board_mmc_init(void) return; } - omap2_hsmmc_init(board_mmc_info); + omap_hsmmc_init(board_mmc_info); } static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1644b73017fc..ace466bcd76d 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -273,6 +273,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = 126, .ext_clock = 0, + .deferred = true, }, { .mmc = 2, @@ -281,6 +282,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .gpio_wp = 127, .ext_clock = 1, .transceiver = true, + .deferred = true, }, { .mmc = 3, @@ -300,7 +302,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */ omap3pandora_mmc[0].gpio_cd = gpio + 0; omap3pandora_mmc[1].gpio_cd = gpio + 1; - omap2_hsmmc_init(omap3pandora_mmc); + omap_hsmmc_late_init(omap3pandora_mmc); /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; @@ -580,6 +582,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_hsmmc_init(omap3pandora_mmc); omap3pandora_i2c_init(); pandora_wl1251_init(); platform_add_devices(omap3pandora_devices, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index cb089a46f62f..8eee9930ee5f 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -209,10 +209,11 @@ static struct regulator_init_data omap3stalker_vsim = { static struct omap2_hsmmc_info mmc[] = { { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 23, + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = 23, + .deferred = true, }, {} /* Terminator */ }; @@ -284,7 +285,7 @@ omap3stalker_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * Most GPIOs are for USB OTG. Some are mostly sent to @@ -425,6 +426,7 @@ static void __init omap3_stalker_init(void) omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); + omap_hsmmc_init(mmc); omap3_stalker_i2c_init(); platform_add_devices(omap3_stalker_devices, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index a0b851aafcca..ba9c118862e6 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, + .deferred = true, }, {} /* Terminator */ }; @@ -125,7 +126,7 @@ static int touchbook_twl_gpio_setup(struct device *dev, } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -351,6 +352,7 @@ static void __init omap3_touchbook_init(void) pm_power_off = omap3_touchbook_poweroff; + omap_hsmmc_init(mmc); omap3_touchbook_i2c_init(); platform_add_devices(omap3_touchbook_devices, ARRAY_SIZE(omap3_touchbook_devices)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 28fc271f7031..bcc563c37b64 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -245,9 +245,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) { struct omap2_hsmmc_info *c; - omap2_hsmmc_init(controllers); + omap_hsmmc_init(controllers); for (c = controllers; c->mmc; c++) - omap4_twl6030_hsmmc_set_late_init(c->dev); + omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); return 0; } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52c0cef77165..668533e2a379 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -407,8 +407,6 @@ static inline void __init overo_init_keys(void) { return; } static int overo_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - omap2_hsmmc_init(mmc); - #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -505,6 +503,7 @@ static void __init overo_init(void) int ret; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_hsmmc_init(mmc); overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 8678b386c6a2..2d24c98f3d45 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -120,7 +120,7 @@ static void __init rm680_peripherals_init(void) ARRAY_SIZE(rm680_peripherals_devices)); rm680_i2c_init(); gpmc_onenand_init(board_onenand_data); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index acb4e77b39ef..0e9d89a2048f 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1145,7 +1145,7 @@ void __init rx51_peripherals_init(void) partition = omap_mux_get("core"); if (partition) - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); rx51_charger_init(); } diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index c126461836ac..3d39cdb2e250 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -205,6 +205,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .power_saving = true, + .deferred = true, }, { .name = "internal", @@ -233,7 +234,7 @@ static int zoom_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"); @@ -301,6 +302,7 @@ void __init zoom_peripherals_init(void) if (ret) pr_err("error setting wl12xx data: %d\n", ret); + omap_hsmmc_init(mmc); omap_i2c_init(); platform_device_register(&omap_vwlan_device); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 19dd1657245c..efb2fcbf9b3f 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -429,66 +429,131 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } static int omap_hsmmc_done; + +void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) +{ + struct platform_device *pdev; + struct omap_mmc_platform_data *mmc_pdata; + int res; + + if (omap_hsmmc_done != 1) + return; + + omap_hsmmc_done++; + + for (; c->mmc; c++) { + if (!c->deferred) + continue; + + pdev = c->pdev; + if (!pdev) + continue; + + mmc_pdata = pdev->dev.platform_data; + if (!mmc_pdata) + continue; + + mmc_pdata->slots[0].switch_pin = c->gpio_cd; + mmc_pdata->slots[0].gpio_wp = c->gpio_wp; + + res = omap_device_register(pdev); + if (res) + pr_err("Could not late init MMC %s\n", + c->name); + } +} + #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +static void omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, + int ctrl_nr) { struct omap_hwmod *oh; + struct omap_hwmod *ohs[1]; + struct omap_device *od; struct platform_device *pdev; char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; struct omap_mmc_platform_data *mmc_data; struct omap_mmc_dev_attr *mmc_dev_attr; char *name; - int l; + int res; mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); if (!mmc_data) { pr_err("Cannot allocate memory for mmc device!\n"); - goto done; + return; } - if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) { - pr_err("%s fails!\n", __func__); - goto done; - } + res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data); + if (res < 0) + goto free_mmc; + omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); name = "omap_hsmmc"; - - l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, + res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, "mmc%d", ctrl_nr); - WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN, + WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN, "String buffer overflow in MMC%d device setup\n", ctrl_nr); + oh = omap_hwmod_lookup(oh_name); if (!oh) { pr_err("Could not look up %s\n", oh_name); - kfree(mmc_data->slots[0].name); - goto done; + goto free_name; } - + ohs[0] = oh; if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; } - pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, - sizeof(struct omap_mmc_platform_data), NULL, 0, false); - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); - kfree(mmc_data->slots[0].name); - goto done; + pdev = platform_device_alloc(name, ctrl_nr - 1); + if (!pdev) { + pr_err("Could not allocate pdev for %s\n", name); + goto free_name; } - /* - * return device handle to board setup code - * required to populate for regulator framework structure - */ - hsmmcinfo->dev = &pdev->dev; + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + + od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + if (!od) { + pr_err("Could not allocate od for %s\n", name); + goto put_pdev; + } + + res = platform_device_add_data(pdev, mmc_data, + sizeof(struct omap_mmc_platform_data)); + if (res) { + pr_err("Could not add pdata for %s\n", name); + goto put_pdev; + } + + hsmmcinfo->pdev = pdev; + + if (hsmmcinfo->deferred) + goto free_mmc; + + res = omap_device_register(pdev); + if (res) { + pr_err("Could not register od for %s\n", name); + goto free_od; + } + + goto free_mmc; + +free_od: + omap_device_delete(od); + +put_pdev: + platform_device_put(pdev); + +free_name: + kfree(mmc_data->slots[0].name); -done: +free_mmc: kfree(mmc_data); } -void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void omap_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; @@ -521,7 +586,7 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) } for (; controllers->mmc; controllers++) - omap_init_hsmmc(controllers, controllers->mmc); + omap_hsmmc_init_one(controllers, controllers->mmc); } diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index c4409730c4bb..07831cc3c171 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -21,10 +21,11 @@ struct omap2_hsmmc_info { bool no_off; /* power_saving and power is not to go off */ bool no_off_init; /* no power off when not in MMC sleep state */ bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ + bool deferred; /* mmc needs a deferred probe */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ - struct device *dev; /* returned: pointer to mmc adapter */ + struct platform_device *pdev; /* mmc controller instance */ int ocr_mask; /* temporary HACK */ /* Remux (pad configuration) when powering on/off */ void (*remux)(struct device *dev, int slot, int power_on); @@ -34,11 +35,16 @@ struct omap2_hsmmc_info { #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -void omap2_hsmmc_init(struct omap2_hsmmc_info *); +void omap_hsmmc_init(struct omap2_hsmmc_info *); +void omap_hsmmc_late_init(struct omap2_hsmmc_info *); #else -static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info) +static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info) +{ +} + +static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info) { } -- cgit v1.2.1 From e7c248a049c2aac21bded0b0722caee6f0e57256 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Feb 2012 21:32:32 +0000 Subject: mfd: Test for jack detection when deciding if wm8994 should suspend The jack detection on WM1811 is often required during system suspend, add it as another check when deciding if we should suspend. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-core.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index f117e7fb9321..a04b3c108c8c 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -256,6 +256,20 @@ static int wm8994_suspend(struct device *dev) break; } + switch (wm8994->type) { + case WM1811: + ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2); + if (ret < 0) { + dev_err(dev, "Failed to read jackdet: %d\n", ret); + } else if (ret & WM1811_JACKDET_MODE_MASK) { + dev_dbg(dev, "CODEC still active, ignoring suspend\n"); + return 0; + } + break; + default: + break; + } + /* Disable LDO pulldowns while the device is suspended if we * don't know that something will be driving them. */ if (!wm8994->ldo_ena_always_driven) -- cgit v1.2.1 From a60e8df64ddc6bd79c85a970f59f2967c968cfac Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 20 Feb 2012 21:42:03 +0100 Subject: mfd: Fix ab8500 error path bug We were not freeing the irq properly in the error path in the AB8500 driver. Cc: Mark Brown Signed-off-by: Maxime Coquelin Signed-off-by: Alex Macro Signed-off-by: Michel Jaouen Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 53e2a80f42fa..d295941c9a3d 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -956,11 +956,12 @@ int __devinit ab8500_init(struct ab8500 *ab8500) return ret; out_freeirq: - if (ab8500->irq_base) { + if (ab8500->irq_base) free_irq(ab8500->irq, ab8500); out_removeirq: + if (ab8500->irq_base) ab8500_irq_remove(ab8500); - } + return ret; } -- cgit v1.2.1 From 7d96b3e55ad45ebe4ff1a1daad27ac1fff8682ec Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Sun, 19 Feb 2012 18:29:11 +0400 Subject: percpu: fix generic definition of __this_cpu_add_and_return() This patch adds missed "__" into function prefix. Otherwise on all archectures (except x86) it expands to irq/preemtion-safe variant: _this_cpu_generic_add_return(), which do extra irq-save/irq-restore. Optimal generic implementation is __this_cpu_generic_add_return(). Signed-off-by: Konstantin Khlebnikov Acked-by: Christoph Lameter Signed-off-by: Tejun Heo --- include/linux/percpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 32cd1f67462e..3b609eb9cd7d 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -718,7 +718,8 @@ do { \ # ifndef __this_cpu_add_return_8 # define __this_cpu_add_return_8(pcp, val) __this_cpu_generic_add_return(pcp, val) # endif -# define __this_cpu_add_return(pcp, val) __pcpu_size_call_return2(this_cpu_add_return_, pcp, val) +# define __this_cpu_add_return(pcp, val) \ + __pcpu_size_call_return2(__this_cpu_add_return_, pcp, val) #endif #define __this_cpu_sub_return(pcp, val) this_cpu_add_return(pcp, -(val)) -- cgit v1.2.1 From e920d5971d706290c5a6281f719e16c25021f964 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 15 Feb 2012 16:54:38 +0800 Subject: percpu: use raw_local_irq_* in _this_cpu op It doesn't make sense to trace irq off or do irq flags lock proving inside 'this_cpu' operations, so replace local_irq_* with raw_local_irq_* in 'this_cpu' op. Also the patch fixes onelockdep warning[1] by the replacement, see below: In commit: 933393f58fef9963eac61db8093689544e29a600(percpu: Remove irqsafe_cpu_xxx variants), local_irq_save/restore(flags) are added inside this_cpu_inc operation, so that trace_hardirqs_off_caller will be called by trace_hardirqs_on_caller directly because __debug_atomic_inc is implemented as this_cpu_inc, which may trigger the lockdep warning[1], for example in the below ARM scenary: kernel_thread_helper /*irq disabled*/ ->trace_hardirqs_on_caller /*hardirqs_enabled was set*/ ->trace_hardirqs_off_caller /*hardirqs_enabled cleared*/ __this_cpu_add(redundant_hardirqs_on) ->trace_hardirqs_off_caller /*irq disabled, so call here*/ The 'unannotated irqs-on' warning will be triggered somewhere because irq is just enabled after the irq trace in kernel_thread_helper. [1], [ 0.162841] ------------[ cut here ]------------ [ 0.167694] WARNING: at kernel/lockdep.c:3493 check_flags+0xc0/0x1d0() [ 0.174468] Modules linked in: [ 0.177703] Backtrace: [ 0.180328] [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) [ 0.189086] r6:c051f778 r5:00000da5 r4:00000000 r3:60000093 [ 0.195007] [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x54/0x6c) [ 0.204223] [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_null+0x24/0x2c) [ 0.214111] r8:00000000 r7:00000000 r6:ee069598 r5:60000013 r4:ee082000 [ 0.220825] r3:00000009 [ 0.223693] [] (warn_slowpath_null+0x0/0x2c) from [] (check_flags+0xc0/0x1d0) [ 0.232910] [] (check_flags+0x0/0x1d0) from [] (lock_acquire+0x4c/0x11c) [ 0.241668] [] (lock_acquire+0x0/0x11c) from [] (_raw_spin_lock+0x3c/0x74) [ 0.250610] [] (_raw_spin_lock+0x0/0x74) from [] (set_task_comm+0x20/0xc0) [ 0.259521] r6:ee069588 r5:ee0691c0 r4:ee082000 [ 0.264404] [] (set_task_comm+0x0/0xc0) from [] (kthreadd+0x28/0x108) [ 0.272857] r8:00000000 r7:00000013 r6:c0044a08 r5:ee0691c0 r4:ee082000 [ 0.279571] r3:ee083fe0 [ 0.282470] [] (kthreadd+0x0/0x108) from [] (do_exit+0x0/0x6dc) [ 0.290405] r5:c0060758 r4:00000000 [ 0.294189] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.299041] possible reason: unannotated irqs-on. [ 0.303955] irq event stamp: 5 [ 0.307159] hardirqs last enabled at (4): [] no_work_pending+0x8/0x2c [ 0.314880] hardirqs last disabled at (5): [] trace_hardirqs_on_caller+0x60/0x26c [ 0.323547] softirqs last enabled at (0): [] copy_process+0x33c/0xef4 [ 0.331207] softirqs last disabled at (0): [< (null)>] (null) [ 0.337585] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Acked-by: Christoph Lameter Signed-off-by: Ming Lei Signed-off-by: Tejun Heo --- include/linux/percpu.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 3b609eb9cd7d..594c0040fdd8 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -348,9 +348,9 @@ do { \ #define _this_cpu_generic_to_op(pcp, val, op) \ do { \ unsigned long flags; \ - local_irq_save(flags); \ + raw_local_irq_save(flags); \ *__this_cpu_ptr(&(pcp)) op val; \ - local_irq_restore(flags); \ + raw_local_irq_restore(flags); \ } while (0) #ifndef this_cpu_write @@ -449,10 +449,10 @@ do { \ ({ \ typeof(pcp) ret__; \ unsigned long flags; \ - local_irq_save(flags); \ + raw_local_irq_save(flags); \ __this_cpu_add(pcp, val); \ ret__ = __this_cpu_read(pcp); \ - local_irq_restore(flags); \ + raw_local_irq_restore(flags); \ ret__; \ }) @@ -479,10 +479,10 @@ do { \ #define _this_cpu_generic_xchg(pcp, nval) \ ({ typeof(pcp) ret__; \ unsigned long flags; \ - local_irq_save(flags); \ + raw_local_irq_save(flags); \ ret__ = __this_cpu_read(pcp); \ __this_cpu_write(pcp, nval); \ - local_irq_restore(flags); \ + raw_local_irq_restore(flags); \ ret__; \ }) @@ -507,11 +507,11 @@ do { \ ({ \ typeof(pcp) ret__; \ unsigned long flags; \ - local_irq_save(flags); \ + raw_local_irq_save(flags); \ ret__ = __this_cpu_read(pcp); \ if (ret__ == (oval)) \ __this_cpu_write(pcp, nval); \ - local_irq_restore(flags); \ + raw_local_irq_restore(flags); \ ret__; \ }) @@ -544,10 +544,10 @@ do { \ ({ \ int ret__; \ unsigned long flags; \ - local_irq_save(flags); \ + raw_local_irq_save(flags); \ ret__ = __this_cpu_generic_cmpxchg_double(pcp1, pcp2, \ oval1, oval2, nval1, nval2); \ - local_irq_restore(flags); \ + raw_local_irq_restore(flags); \ ret__; \ }) -- cgit v1.2.1 From 9bbb8168ed3d8b946f9c1901a63a675012de88f2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 15 Feb 2012 19:31:20 +0100 Subject: ath9k_hw: prevent writes to const data on AR9160 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Duplicate the data for iniAddac early on, to avoid having to do redundant memcpy calls later. While we're at it, make AR5416 < v2.2 use the same codepath. Fixes a reported crash on x86. Signed-off-by: Felix Fietkau Reported-by: Magnus Määttä Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 25 +------------------------ drivers/net/wireless/ath/ath9k/ar9002_hw.c | 19 +++++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.h | 1 - 3 files changed, 20 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index f901a17f76ba..86a891f93fc9 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -489,8 +489,6 @@ static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah) ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows); ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows); ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows); - ATH_ALLOC_BANK(ah->addac5416_21, - ah->iniAddac.ia_rows * ah->iniAddac.ia_columns); ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows); return 0; @@ -519,7 +517,6 @@ static void ar5008_hw_rf_free_ext_banks(struct ath_hw *ah) ATH_FREE_BANK(ah->analogBank6Data); ATH_FREE_BANK(ah->analogBank6TPCData); ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->addac5416_21); ATH_FREE_BANK(ah->bank6Temp); #undef ATH_FREE_BANK @@ -805,27 +802,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, if (ah->eep_ops->set_addac) ah->eep_ops->set_addac(ah, chan); - if (AR_SREV_5416_22_OR_LATER(ah)) { - REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites); - } else { - struct ar5416IniArray temp; - u32 addacSize = - sizeof(u32) * ah->iniAddac.ia_rows * - ah->iniAddac.ia_columns; - - /* For AR5416 2.0/2.1 */ - memcpy(ah->addac5416_21, - ah->iniAddac.ia_array, addacSize); - - /* override CLKDRV value at [row, column] = [31, 1] */ - (ah->addac5416_21)[31 * ah->iniAddac.ia_columns + 1] = 0; - - temp.ia_array = ah->addac5416_21; - temp.ia_columns = ah->iniAddac.ia_columns; - temp.ia_rows = ah->iniAddac.ia_rows; - REG_WRITE_ARRAY(&temp, 1, regWrites); - } - + REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites); REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); ENABLE_REGWRITE_BUFFER(ah); diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 11f192a1ceb7..d190411ac8f5 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -180,6 +180,25 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac, ARRAY_SIZE(ar5416Addac), 2); } + + /* iniAddac needs to be modified for these chips */ + if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) { + struct ar5416IniArray *addac = &ah->iniAddac; + u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns; + u32 *data; + + data = kmalloc(size, GFP_KERNEL); + if (!data) + return; + + memcpy(data, addac->ia_array, size); + addac->ia_array = data; + + if (!AR_SREV_5416_22_OR_LATER(ah)) { + /* override CLKDRV value */ + INI_RA(addac, 31,1) = 0; + } + } } /* Support for Japan ch.14 (2484) spread */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6a29004a71b0..c8261d4fc780 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -940,7 +940,6 @@ struct ath_hw { u32 *analogBank6Data; u32 *analogBank6TPCData; u32 *analogBank7Data; - u32 *addac5416_21; u32 *bank6Temp; u8 txpower_limit; -- cgit v1.2.1 From 7be081539e540517d5e1fcbf96b8080074afbf08 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 16 Feb 2012 20:44:59 +0100 Subject: rt2x00: fix a possible NULL pointer dereference The 'rt2x00lib_probe_dev' function tries to allocate the workqueue. If the allocation fails, 'rt2x00_lib_remove_dev' is called on the error path. Because 'rt2x00dev->workqueue' is NULL in this case, the 'destroy_workqueue' call will cause a NULL pointer dereference. Signed-off-by: Gabor Juhos Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c3e1aa7c1a80..d2a1ea98d0f2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1220,7 +1220,8 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) cancel_work_sync(&rt2x00dev->rxdone_work); cancel_work_sync(&rt2x00dev->txdone_work); } - destroy_workqueue(rt2x00dev->workqueue); + if (rt2x00dev->workqueue) + destroy_workqueue(rt2x00dev->workqueue); /* * Free the tx status fifo. -- cgit v1.2.1 From 5dcbf480473f6c3f06ad2426b7517038a2a18911 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 17 Feb 2012 09:47:14 -0800 Subject: iwlwifi: fix key removal When trying to remove a key, we always send key flags just setting the key type, not including the multicast flag and the key ID. As a result, whenever any key was removed, the unicast key 0 would be removed, causing a complete connection loss after the second rekey (the first doesn't cause a key removal). Fix the key removal code to include the key ID and multicast flag, thus removing the correct key. Cc: stable@vger.kernel.org Reported-by: Alexander Schnaidt Tested-by: Alexander Schnaidt Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-sta.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index 7353826095f1..e483cfa8d14e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -1187,6 +1187,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, unsigned long flags; struct iwl_addsta_cmd sta_cmd; u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta); + __le16 key_flags; /* if station isn't there, neither is the key */ if (sta_id == IWL_INVALID_STATION) @@ -1212,7 +1213,14 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, IWL_ERR(priv, "offset %d not used in uCode key table.\n", keyconf->hw_key_idx); - sta_cmd.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; + key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC | + STA_KEY_FLG_INVALID; + + if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + key_flags |= STA_KEY_MULTICAST_MSK; + + sta_cmd.key.key_flags = key_flags; sta_cmd.key.key_offset = WEP_INVALID_OFFSET; sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; sta_cmd.mode = STA_CONTROL_MODIFY_MSK; -- cgit v1.2.1 From 8617b093d0031837a7be9b32bc674580cfb5f6b5 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Mon, 20 Feb 2012 10:05:31 +0530 Subject: mac80211: zero initialize count field in ieee80211_tx_rate rate control algorithms concludes the rate as invalid with rate[i].idx < -1 , while they do also check for rate[i].count is non-zero. it would be safer to zero initialize the 'count' field. recently we had a ath9k rate control crash where the ath9k rate control in ath_tx_status assumed to check only for rate[i].count being non-zero in one instance and ended up in using invalid rate index for 'connection monitoring NULL func frames' which eventually lead to the crash. thanks to Pavel Roskin for fixing it and finding the root cause. https://bugzilla.redhat.com/show_bug.cgi?id=768639 Cc: stable@vger.kernel.org Cc: Pavel Roskin Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- net/mac80211/rate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index ad64f4d5271a..f9b8e819ca63 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -344,7 +344,7 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { info->control.rates[i].idx = -1; info->control.rates[i].flags = 0; - info->control.rates[i].count = 1; + info->control.rates[i].count = 0; } if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) -- cgit v1.2.1 From 0dee00686da88cc32753e02e4e8efdd9e326e4d2 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Mon, 20 Feb 2012 14:44:01 +0530 Subject: mac80211: Fix a warning on changing to monitor mode from STA nothing needs to be done for monitor/AP_VLAN mode on calling ieee80211_bss_info_change_notify -> drv_bss_info_changed with the change flag 'BSS_CHANGED_IDLE'. 'wl1271' seems to use BSS_CHANGED_IDLE only for STA and IBSS mode. further the non-idle state of the monitor mode is taken care by the 'count' variable which counts non-idle interfaces. ieee80211_idle_off(local, "in use") will be called. this fixes the following WARNING when we have initially STA mode (network manager running) and not associated, and change it to monitor mode with network manager disabled and bringing up the monitor mode. this changes the idle state from 'true' (STA unassociated) to 'false' (MONITOR mode) exposed by the commit 405385f8ce7a2ed8f82e216d88b5282142e1288b "mac80211: set bss_conf.idle when vif is connected" WARNING: net/mac80211/main.c:212 ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211]() Hardware name: 64756D6 Pid: 3835, comm: ifconfig Tainted: G O 3.3.0-rc3-wl #9 Call Trace: [] warn_slowpath_common+0x72/0xa0 [] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [] warn_slowpath_null+0x22/0x30 [] ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [] __ieee80211_recalc_idle+0x113/0x430 [mac80211] [] ieee80211_do_open+0x156/0x7e0 [mac80211] [] ? ieee80211_check_concurrent_iface+0x25/0x180 [mac80211] [] ? raw_notifier_call_chain+0x1f/0x30 [] ieee80211_open+0x40/0x80 [mac80211] [] __dev_open+0x96/0xe0 [] ? _raw_spin_unlock_bh+0x35/0x40 [] __dev_change_flags+0x109/0x170 [] dev_change_flags+0x23/0x60 [] devinet_ioctl+0x6a0/0x770 ieee80211 phy0: device no longer idle - in use Cc: Eliad Peller Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- net/mac80211/iface.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 01a21c2f6ab3..8e2137bd87e2 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1332,6 +1332,9 @@ u32 __ieee80211_recalc_idle(struct ieee80211_local *local) hw_roc = true; list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR || + sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + continue; if (sdata->old_idle == sdata->vif.bss_conf.idle) continue; if (!ieee80211_sdata_running(sdata)) -- cgit v1.2.1 From 81b5482c32769abb6dfb979560dab2f952ba86fa Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 18 Feb 2012 17:54:23 +0100 Subject: mfd: Fix ACPI conflict check The code is currently always checking the first resource of every device only (several times.) This has been broken since the ACPI check was added in February 2010 in commit 91fedede0338eb6203cdd618d8ece873fdb7c22c. Fix the check to run on each resource individually, once. Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz --- drivers/mfd/mfd-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 0f5922812bff..411f523d4878 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -123,7 +123,7 @@ static int mfd_add_device(struct device *parent, int id, } if (!cell->ignore_resource_conflicts) { - ret = acpi_check_resource_conflict(res); + ret = acpi_check_resource_conflict(&res[r]); if (ret) goto fail_res; } -- cgit v1.2.1 From d5f39d3862a2f3620db10cc0c3f329f0d6f1f596 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 Feb 2012 15:50:11 +0800 Subject: mfd: Initialize tps65912 irq platform data properly irq_base of the tps65912 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65912-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 5fec23a9ac03..74fd8cb5f372 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -151,7 +151,7 @@ int tps65912_device_init(struct tps65912 *tps65912) goto err; init_data->irq = pmic_plat_data->irq; - init_data->irq_base = pmic_plat_data->irq; + init_data->irq_base = pmic_plat_data->irq_base; ret = tps65912_irq_init(tps65912, init_data->irq, init_data); if (ret < 0) goto err; -- cgit v1.2.1 From 1cc1c96c1658bfaf85d06d764bd7ac00640ae90f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 20 Feb 2012 17:23:47 -0800 Subject: PCI: fix memleak when ACPI _CRS is not used. warning: unreferenced object 0xffff8801f6914200 (size 512): comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s) hex dump (first 32 bytes): 00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00 `X/............. backtrace: [] kmemleak_alloc+0x26/0x43 [] __kmalloc+0x121/0x183 [] get_current_resources+0x5a/0xc6 [] pci_acpi_scan_root+0x13c/0x21c [] acpi_pci_root_add+0x1e1/0x421 [] acpi_device_probe+0x50/0x190 [] really_probe+0x99/0x126 [] driver_probe_device+0x3b/0x56 [] __driver_attach+0x5f/0x82 [] bus_for_each_dev+0x5c/0x88 [] driver_attach+0x1e/0x20 [] bus_add_driver+0xca/0x21d [] driver_register+0x91/0xfe [] acpi_bus_register_driver+0x43/0x45 [] acpi_pci_root_init+0x20/0x28 [] do_one_initcall+0x57/0x134 The system has _CRS for root buses, but they are not used because the machine date is before the cutoff date for _CRS usage. Try to free those unused resource arrays and names. Reviewed-by: Bjorn Helgaas Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/x86/pci/acpi.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index a312e76063a7..c33e0970ee9f 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -282,9 +282,6 @@ static void add_resources(struct pci_root_info *info) int i; struct resource *res, *root, *conflict; - if (!pci_use_crs) - return; - coalesce_windows(info, IORESOURCE_MEM); coalesce_windows(info, IORESOURCE_IO); @@ -336,8 +333,13 @@ get_current_resources(struct acpi_device *device, int busnum, acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, &info); - add_resources(&info); - return; + if (pci_use_crs) { + add_resources(&info); + + return; + } + + kfree(info.name); name_alloc_fail: kfree(info.res); -- cgit v1.2.1 From 85091fc0a75653e239dc8379658515e577544927 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 23 Feb 2012 18:38:22 +0100 Subject: brcm80211: smac: fix endless retry of A-MPDU transmissions The A-MPDU code checked against a retry limit, but it was using the wrong variable to do so. This patch fixes this to assure proper retry mechanism. This problem had a side-effect causing the mac80211 flush callback to remain waiting forever as well. That side effect has been fixed by commit by Stanislaw Gruszka: commit f96b08a7e6f69c0f0a576554df3df5b1b519c479 Date: Tue Jan 17 12:38:50 2012 +0100 brcmsmac: fix tx queue flush infinite loop Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576 Cc: Stanislaw Gruszka Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Alwin Beukers Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/ampdu.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c index 90911eec0cf5..92652264f205 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c @@ -1051,17 +1051,13 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, } /* either retransmit or send bar if ack not recd */ if (!ack_recd) { - struct ieee80211_tx_rate *txrate = - tx_info->status.rates; - if (retry && (txrate[0].count < (int)retry_limit)) { + if (retry && (ini->txretry[index] < (int)retry_limit)) { ini->txretry[index]++; ini->tx_in_transit--; /* * Use high prededence for retransmit to * give some punch */ - /* brcms_c_txq_enq(wlc, scb, p, - * BRCMS_PRIO_TO_PREC(tid)); */ brcms_c_txq_enq(wlc, scb, p, BRCMS_PRIO_TO_HI_PREC(tid)); } else { -- cgit v1.2.1 From 2b0a53d51b5f263bb581bbdb40ebb9f7e09609b1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 23 Feb 2012 18:38:23 +0100 Subject: brcm80211: smac: only print block-ack timeout message at trace level In regular use block-ack timeouts can happen so it does not make sense to fill the log with these messages. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Alwin Beukers Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/ampdu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c index 92652264f205..30b58870b1b6 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c @@ -1070,9 +1070,9 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, IEEE80211_TX_STAT_AMPDU_NO_BACK; skb_pull(p, D11_PHY_HDR_LEN); skb_pull(p, D11_TXH_LEN); - wiphy_err(wiphy, "%s: BA Timeout, seq %d, in_" - "transit %d\n", "AMPDU status", seq, - ini->tx_in_transit); + BCMMSG(wiphy, + "BA Timeout, seq %d, in_transit %d\n", + seq, ini->tx_in_transit); ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p); } -- cgit v1.2.1 From 7e55d0527e4925a49464a5b26fdabae1f7a91a77 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Thu, 23 Feb 2012 04:41:05 +0100 Subject: ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool serial.h uses bool, but its definition is missing, as it doesn't include types.h. Fix this by including types.h Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- include/linux/amba/serial.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 514ed45c462e..d117b29d1062 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -23,6 +23,8 @@ #ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H #define ASM_ARM_HARDWARE_SERIAL_AMBA_H +#include + /* ------------------------------------------------------------------------------- * From AMBA UART (PL010) Block Specification * ------------------------------------------------------------------------------- -- cgit v1.2.1 From 99c90ab31fad855b9da9dee3a5aa6c27f263e9d6 Mon Sep 17 00:00:00 2001 From: Akio Idehara Date: Fri, 24 Feb 2012 00:33:22 -0800 Subject: Input: ALPS - fix touchpad detection when buttons are pressed ALPS touchpad detection fails if some buttons of ALPS are pressed. The reason is that the "E6" query response byte is different from what is expected. This was tested on a Toshiba Portege R500. Cc: stable Signed-off-by: Akio Idehara Tested-by: Seth Forshee Signed-off-by: Dmitry Torokhov --- Documentation/input/alps.txt | 3 ++- drivers/input/mouse/alps.c | 7 +++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index f274c28b5103..2f95308251d4 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -13,7 +13,8 @@ Detection All ALPS touchpads should respond to the "E6 report" command sequence: E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or -00-00-64. +00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s +if some buttons are pressed. If the E6 report is successful, the touchpad model is identified using the "E7 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index bd87380bd879..4c6a72d3d48c 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -952,7 +952,9 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int /* * First try "E6 report". - * ALPS should return 0,0,10 or 0,0,100 + * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. + * The bits 0-2 of the first byte will be 1s if some buttons are + * pressed. */ param[0] = 0; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || @@ -968,7 +970,8 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); - if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100)) + if ((param[0] & 0xf8) != 0 || param[1] != 0 || + (param[2] != 10 && param[2] != 100)) return NULL; /* -- cgit v1.2.1 From 68513a4c5fe68938350cf2c56d97946e49f014e1 Mon Sep 17 00:00:00 2001 From: Chris Bagwell Date: Wed, 8 Feb 2012 23:08:48 -0800 Subject: Input: wacom - add missing LEDS_CLASS to Kconfig Signed-off-by: Chris Bagwell Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index 58a87755b936..e53f4081a586 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -77,6 +77,8 @@ config TABLET_USB_WACOM tristate "Wacom Intuos/Graphire tablet support (USB)" depends on USB_ARCH_HAS_HCD select USB + select NEW_LEDS + select LEDS_CLASS help Say Y here if you want to use the USB version of the Wacom Intuos or Graphire tablet. Make sure to say Y to "Mouse support" -- cgit v1.2.1 From 02dfc496800dfaf17b650256642f3df86653fe97 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Wed, 8 Feb 2012 23:08:48 -0800 Subject: Input: evdev - fix variable initialisation Commit 509f87c5f564 (evdev - do not block waiting for an event if fd is nonblock) created a code path were it was possible to use retval uninitialized. This could lead to the xorg evdev input driver getting corrupt data and refusing to work with log messages like AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success (for drivers auo-pixcir-ts and gpio-keys). Signed-off-by: Heiko Stuebner Acked-by: Dima Zavin Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index afc166fcc3d9..7df5bfef2624 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -332,7 +332,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer, struct evdev_client *client = file->private_data; struct evdev *evdev = client->evdev; struct input_event event; - int retval; + int retval = 0; if (count < input_event_size()) return -EINVAL; -- cgit v1.2.1 From f3761c0779b62276b5bf84532a81d5dc49bd721f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 24 Feb 2012 00:51:40 -0800 Subject: Input: twl4030-vibra - use proper guard for PM methods On m68k: drivers/input/misc/twl4030-vibra.c:175:5: warning: "CONFIG_PM" is not defined We should use #ifdef instead of #if and also check CONFIG_PM_SLEEP instead of CONFIG_PM. Reported-by: Geert Uytterhoeven Signed-off-by: Dmitry Torokhov --- drivers/input/misc/twl4030-vibra.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 37651373a95b..f3bc4189a7ba 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -172,7 +172,7 @@ static void twl4030_vibra_close(struct input_dev *input) } /*** Module ***/ -#if CONFIG_PM +#if CONFIG_PM_SLEEP static int twl4030_vibra_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -189,10 +189,10 @@ static int twl4030_vibra_resume(struct device *dev) vibra_disable_leds(); return 0; } +#endif static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops, twl4030_vibra_suspend, twl4030_vibra_resume); -#endif static int __devinit twl4030_vibra_probe(struct platform_device *pdev) { @@ -273,9 +273,7 @@ static struct platform_driver twl4030_vibra_driver = { .driver = { .name = "twl4030-vibra", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &twl4030_vibra_pm_ops, -#endif }, }; module_platform_driver(twl4030_vibra_driver); -- cgit v1.2.1 From 3e2e613f5f1c5d8b30e6ce49954143bdfaa03dd5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 23 Feb 2012 14:58:08 -0800 Subject: ARM: OMAP: Fix devexit for dma when CONFIG_HOTPLUG is not set Otherwise we get: `omap_system_dma_remove' referenced in section `.data' of arch/arm/plat-omap/built-in.o: defined in discarded section `.devexit.text' of arch/arm/plat-omap/built-in.o Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 002fb4d96bbc..cb856fe0434a 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2125,7 +2125,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) static struct platform_driver omap_system_dma_driver = { .probe = omap_system_dma_probe, - .remove = omap_system_dma_remove, + .remove = __devexit_p(omap_system_dma_remove), .driver = { .name = "omap_dma_system" }, -- cgit v1.2.1 From c295fb633e321a7df3b8846c4eaddc5da3e0aaed Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 23 Feb 2012 16:41:53 -0800 Subject: ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP If we don't have ARCH_OMAP2, 3 or 4 selected randconfig will always fail with multiple errors as the CPU and MACHINE are not set. Fix this by changing arch/arm/Makefile to build mach-omap2 based on ARCH_OMAP2PLUS. And let's introduce SOC_OMAP and SOC_OMAP_NOOP that allow randconfig to generate buildable .config files. Note that we can also remove few uncecssary ARCH_OMAP2PLUS lines as they are all within if ARCH_OMAP2PLUS block. Cc: Russell King Signed-off-by: Tony Lindgren --- arch/arm/Makefile | 4 +--- arch/arm/mach-omap2/Kconfig | 51 ++++++++++++++++++++++++++++++--------------- 2 files changed, 35 insertions(+), 20 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1683bfb9166f..ea69448be0ed 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -164,9 +164,7 @@ machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik machine-$(CONFIG_ARCH_OMAP1) := omap1 -machine-$(CONFIG_ARCH_OMAP2) := omap2 -machine-$(CONFIG_ARCH_OMAP3) := omap2 -machine-$(CONFIG_ARCH_OMAP4) := omap2 +machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell machine-$(CONFIG_ARCH_PNX4008) := pnx4008 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 337f98dd8148..c4ae0a77f7b4 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -21,16 +21,12 @@ config ARCH_OMAP2PLUS_TYPICAL Compile a kernel suitable for booting most boards config ARCH_OMAP2 - bool "TI OMAP2" - depends on ARCH_OMAP2PLUS - default y + bool select CPU_V6 select MULTI_IRQ_HANDLER config ARCH_OMAP3 - bool "TI OMAP3" - depends on ARCH_OMAP2PLUS - default y + bool select CPU_V7 select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP @@ -39,9 +35,7 @@ config ARCH_OMAP3 select MULTI_IRQ_HANDLER config ARCH_OMAP4 - bool "TI OMAP4" - default y - depends on ARCH_OMAP2PLUS + bool select CACHE_L2X0 select CPU_V7 select ARM_GIC @@ -56,36 +50,58 @@ config ARCH_OMAP4 select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" - depends on ARCH_OMAP2 + +config SOC_OMAP + bool config SOC_OMAP2420 bool "OMAP2420 support" - depends on ARCH_OMAP2 default y + select SOC_OMAP + select ARCH_OMAP2 select OMAP_DM_TIMER select ARCH_OMAP_OTG config SOC_OMAP2430 bool "OMAP2430 support" - depends on ARCH_OMAP2 default y + select SOC_OMAP + select ARCH_OMAP2 select ARCH_OMAP_OTG config SOC_OMAP3430 bool "OMAP3430 support" - depends on ARCH_OMAP3 default y + select SOC_OMAP + select ARCH_OMAP3 select ARCH_OMAP_OTG config SOC_OMAPTI81XX bool "TI81XX support" - depends on ARCH_OMAP3 default y + select SOC_OMAP + select ARCH_OMAP3 config SOC_OMAPAM33XX bool "AM33XX support" - depends on ARCH_OMAP3 default y + select SOC_OMAP + select ARCH_OMAP3 + +config SOC_OMAP44XX + bool "OMAP44XX support" + default y + select SOC_OMAP + select ARCH_OMAP4 + +config SOC_OMAP_NOOP + bool + depends on !SOC_OMAP + default y + select ARCH_OMAP2 + select ARCH_OMAP3 + select ARCH_OMAP4 + select MACH_OMAP_GENERIC config OMAP_PACKAGE_ZAF bool @@ -112,17 +128,17 @@ config OMAP_PACKAGE_CBS bool comment "OMAP Board Type" - depends on ARCH_OMAP2PLUS config MACH_OMAP_GENERIC bool "Generic OMAP2+ board" - depends on ARCH_OMAP2PLUS select USE_OF default y help Support for generic TI OMAP2+ boards using Flattened Device Tree. More information at Documentation/devicetree +if SOC_OMAP + config MACH_OMAP2_TUSB6010 bool depends on ARCH_OMAP2 && SOC_OMAP2420 @@ -343,6 +359,7 @@ config MACH_OMAP4_PANDA select OMAP_PACKAGE_CBS select REGULATOR_FIXED_VOLTAGE if REGULATOR +endif config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 -- cgit v1.2.1 From d1589f0912533e6cb2ac8fd6f1feb3d5989fe8cb Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 20 Feb 2012 09:43:30 -0800 Subject: ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init Now that omap hsmmc init is split into two functions, it's safe to mark omap_hsmmc_init and omap_mux related functions to __init. This basically reverts the following fixes for the case where TWL was compiled as a module: a98f77b (ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()) 8930b4e (ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c) Additionally it fixes up the remaining section warnings for all callers of omap_mux functions. Cc: Russell King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 6 ++++-- arch/arm/mach-omap2/board-omap3evm.c | 3 ++- arch/arm/mach-omap2/board-omap3stalker.c | 3 ++- arch/arm/mach-omap2/board-omap3touchbook.c | 13 +++++++------ arch/arm/mach-omap2/board-omap4panda.c | 2 +- arch/arm/mach-omap2/display.c | 8 ++++---- arch/arm/mach-omap2/hsmmc.c | 6 +++--- arch/arm/mach-omap2/mux.c | 16 ++++++++-------- 9 files changed, 32 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 30a6f527510c..0349fd2b68d8 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -189,7 +189,7 @@ unmap: * * @return - void. */ -void board_flash_init(struct flash_partitions partition_info[], +void __init board_flash_init(struct flash_partitions partition_info[], char chip_sel_board[][GPMC_CS_NUM], int nand_type) { u8 cs = 0; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 78bfcd5d5a78..7be8d659d91d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -273,8 +273,6 @@ static int beagle_twl_gpio_setup(struct device *dev, { int r; - if (beagle_config.mmc1_gpio_wp != -EINVAL) - omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -522,7 +520,11 @@ static void __init omap3_beagle_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); + + if (beagle_config.mmc1_gpio_wp != -EINVAL) + omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); + omap3_beagle_i2c_init(); gpio_buttons[0].gpio = beagle_config.usr_button_gpio; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3d585b81669a..6b77ad95981d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -362,7 +362,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); @@ -645,7 +644,9 @@ static void __init omap3_evm_init(void) omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 8eee9930ee5f..641004380795 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -283,7 +283,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); @@ -426,7 +425,9 @@ static void __init omap3_stalker_init(void) omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); + omap3_stalker_i2c_init(); platform_add_devices(omap3_stalker_devices, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index ba9c118862e6..8842e04aef01 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -118,12 +118,6 @@ static struct gpio_led gpio_leds[]; static int touchbook_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); @@ -352,7 +346,14 @@ static void __init omap3_touchbook_init(void) pm_power_off = omap3_touchbook_poweroff; + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } omap_hsmmc_init(mmc); + omap3_touchbook_i2c_init(); platform_add_devices(omap3_touchbook_devices, ARRAY_SIZE(omap3_touchbook_devices)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bcc563c37b64..7ca7a5c474d4 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -461,7 +461,7 @@ static struct omap_dss_board_info omap4_panda_dss_data = { .default_device = &omap4_panda_dvi_device, }; -void omap4_panda_display_init(void) +void __init omap4_panda_display_init(void) { int r; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 3677b1f58b85..62e133ca4314 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -124,7 +124,7 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) } } -static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) +static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; u32 pipd_mask, pipd_shift; @@ -157,7 +157,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } -int omap_hdmi_init(enum omap_hdmi_flags flags) +int __init omap_hdmi_init(enum omap_hdmi_flags flags) { if (cpu_is_omap44xx()) omap4_hdmi_mux_pads(flags); @@ -165,7 +165,7 @@ int omap_hdmi_init(enum omap_hdmi_flags flags) return 0; } -static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) +static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) return omap4_dsi_mux_pads(dsi_id, lane_mask); @@ -173,7 +173,7 @@ static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) return 0; } -static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) +static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) omap4_dsi_mux_pads(dsi_id, 0); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index efb2fcbf9b3f..a97876da7fad 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -293,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -553,7 +553,7 @@ free_mmc: kfree(mmc_data); } -void omap_hsmmc_init(struct omap2_hsmmc_info *controllers) +void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 611a0e3d54ca..f26b2faa1694 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +145,7 @@ static int _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int omap_mux_init_gpio(int gpio, int val) +int __init omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +159,9 @@ int omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int +static int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) @@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int omap_mux_init_signal(const char *muxname, int val) +int __init omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; -- cgit v1.2.1 From 9cf793f9b8b1ba9414e2a7591b2e911885f85a27 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 20 Feb 2012 09:43:30 -0800 Subject: ARM: OMAP: convert omap_device_build() and callers to __init Building omap_devices should only be done at init time, and since omap_device_build() is using early_platform calls which are also __init, this ensures that omap_device isn't trying to use functions that disappear. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 8 ++++---- arch/arm/mach-omap2/gpio.c | 2 +- arch/arm/mach-omap2/mcbsp.c | 2 +- arch/arm/mach-omap2/pm.c | 2 +- arch/arm/mach-omap2/sr_device.c | 2 +- arch/arm/plat-omap/omap_device.c | 7 ++++--- 6 files changed, 12 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 283d11eae693..01cffcea936a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -276,7 +276,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data } #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) -static inline void omap_init_mbox(void) +static inline void __init omap_init_mbox(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -337,7 +337,7 @@ static inline void omap_init_audio(void) {} #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) -static void omap_init_mcpdm(void) +static void __init omap_init_mcpdm(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -358,7 +358,7 @@ static inline void omap_init_mcpdm(void) {} #if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) -static void omap_init_dmic(void) +static void __init omap_init_dmic(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -380,7 +380,7 @@ static inline void omap_init_dmic(void) {} #include -static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) +static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused) { struct platform_device *pdev; char *name = "omap2_mcspi"; diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 8cbfbc2918ce..64c0caed9516 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -24,7 +24,7 @@ #include #include -static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) +static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) { struct platform_device *pdev; struct omap_gpio_platform_data *pdata; diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index fb4bcf81a183..5f8a876e4fd2 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -122,7 +122,7 @@ static int omap3_enable_st_clock(unsigned int id, bool enable) return 0; } -static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) +static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) { int id, count = 1; char *name = "omap-mcbsp"; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe915149..fb9b85bfc308 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -28,7 +28,7 @@ static struct omap_device_pm_latency *pm_lats; -static int _init_omap_device(char *name) +static int __init _init_omap_device(char *name) { struct omap_hwmod *oh; struct platform_device *pdev; diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 9f43fcc05d3e..78c9437913ce 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -69,7 +69,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, sr_data->nvalue_count = count; } -static int sr_dev_init(struct omap_hwmod *oh, void *user) +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) { struct omap_sr_data *sr_data; struct platform_device *pdev; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index f72fafc9e9f4..2d00ab01d150 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -1,3 +1,4 @@ + /* * omap_device implementation * @@ -612,7 +613,7 @@ void omap_device_delete(struct omap_device *od) * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, * passes along the return value of omap_device_build_ss(). */ -struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -645,7 +646,7 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, * platform_device record. Returns an ERR_PTR() on error, or passes * along the return value of omap_device_register(). */ -struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **ohs, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -710,7 +711,7 @@ odbs_exit: * platform_early_add_device() on the underlying platform_device. * Returns 0 by default. */ -static int omap_early_device_register(struct platform_device *pdev) +static int __init omap_early_device_register(struct platform_device *pdev) { struct platform_device *devices[1]; -- cgit v1.2.1 From f21c6d4a49179f91fd70a41382382f08c780d425 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 20 Feb 2012 07:22:38 +1100 Subject: tty/powerpc: early udbg consoles can't be modules Fixes these build errors: ERROR: ".udbg_printf" [drivers/tty/ehv_bytechan.ko] undefined! ERROR: ".register_early_udbg_console" [drivers/tty/ehv_bytechan.ko] undefined! ERROR: "udbg_putc" [drivers/tty/ehv_bytechan.ko] undefined! Cc: Timur Tabi Signed-off-by: Stephen Rothwell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index b3d17416d86a..830cd62d8492 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -365,7 +365,7 @@ config PPC_EPAPR_HV_BYTECHAN config PPC_EARLY_DEBUG_EHV_BC bool "Early console (udbg) support for ePAPR hypervisors" - depends on PPC_EPAPR_HV_BYTECHAN + depends on PPC_EPAPR_HV_BYTECHAN=y help Select this option to enable early console (a.k.a. "udbg") support via an ePAPR byte channel. You also need to choose the byte channel -- cgit v1.2.1 From e899b1119f1428f2b04dd7e9dba94864c33dd30b Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 22 Feb 2012 16:14:32 +0100 Subject: netfilter: bridge: fix module autoload in compat case We expected 0 if module doesn't exist, which is no longer the case (42046e2e45c109ba703993c510401a11f716c8df, netfilter: x_tables: return -ENOENT for non-existant matches/targets). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/ebtables.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 5864cc491369..8aa4ad0e06af 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1893,10 +1893,7 @@ static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt, switch (compat_mwt) { case EBT_COMPAT_MATCH: - match = try_then_request_module(xt_find_match(NFPROTO_BRIDGE, - name, 0), "ebt_%s", name); - if (match == NULL) - return -ENOENT; + match = xt_request_find_match(NFPROTO_BRIDGE, name, 0); if (IS_ERR(match)) return PTR_ERR(match); @@ -1915,10 +1912,7 @@ static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt, break; case EBT_COMPAT_WATCHER: /* fallthrough */ case EBT_COMPAT_TARGET: - wt = try_then_request_module(xt_find_target(NFPROTO_BRIDGE, - name, 0), "ebt_%s", name); - if (wt == NULL) - return -ENOENT; + wt = xt_request_find_target(NFPROTO_BRIDGE, name, 0); if (IS_ERR(wt)) return PTR_ERR(wt); off = xt_compat_target_offset(wt); -- cgit v1.2.1 From 6de2ce423157d06f73d570ef7044f08c2f8697da Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Fri, 17 Feb 2012 16:13:30 +0300 Subject: CIFS: Fix mkdir/rmdir bug for the non-POSIX case Currently we do inc/drop_nlink for a parent directory for every mkdir/rmdir calls. That's wrong when Unix extensions are disabled because in this case a server doesn't follow the same semantic and returns the old value on the next QueryInfo request. As the result, we update our value with the server one and then decrement it on every rmdir call - go to negative nlink values. Fix this by removing inc/drop_nlink for the parent directory from mkdir/rmdir, setting it for a revalidation and ignoring NumberOfLinks for directories when Unix extensions are disabled. Signed-off-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index a5f54b7d9822..745da3d0653e 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -534,6 +534,11 @@ cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info, if (fattr->cf_cifsattrs & ATTR_DIRECTORY) { fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode; fattr->cf_dtype = DT_DIR; + /* + * Server can return wrong NumberOfLinks value for directories + * when Unix extensions are disabled - fake it. + */ + fattr->cf_nlink = 2; } else { fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode; fattr->cf_dtype = DT_REG; @@ -541,9 +546,9 @@ cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info, /* clear write bits if ATTR_READONLY is set */ if (fattr->cf_cifsattrs & ATTR_READONLY) fattr->cf_mode &= ~(S_IWUGO); - } - fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks); + fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks); + } fattr->cf_uid = cifs_sb->mnt_uid; fattr->cf_gid = cifs_sb->mnt_gid; @@ -1322,7 +1327,6 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, umode_t mode) } /*BB check (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID ) to see if need to set uid/gid */ - inc_nlink(inode); cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb); cifs_fill_uniqueid(inode->i_sb, &fattr); @@ -1355,7 +1359,6 @@ mkdir_retry_old: d_drop(direntry); } else { mkdir_get_info: - inc_nlink(inode); if (pTcon->unix_ext) rc = cifs_get_inode_info_unix(&newinode, full_path, inode->i_sb, xid); @@ -1436,6 +1439,11 @@ mkdir_get_info: } } mkdir_out: + /* + * Force revalidate to get parent dir info when needed since cached + * attributes are invalid now. + */ + CIFS_I(inode)->time = 0; kfree(full_path); FreeXid(xid); cifs_put_tlink(tlink); @@ -1475,7 +1483,6 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) cifs_put_tlink(tlink); if (!rc) { - drop_nlink(inode); spin_lock(&direntry->d_inode->i_lock); i_size_write(direntry->d_inode, 0); clear_nlink(direntry->d_inode); @@ -1483,12 +1490,15 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) } cifsInode = CIFS_I(direntry->d_inode); - cifsInode->time = 0; /* force revalidate to go get info when - needed */ + /* force revalidate to go get info when needed */ + cifsInode->time = 0; cifsInode = CIFS_I(inode); - cifsInode->time = 0; /* force revalidate to get parent dir info - since cached search results now invalid */ + /* + * Force revalidate to get parent dir info when needed since cached + * attributes are invalid now. + */ + cifsInode->time = 0; direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb); -- cgit v1.2.1 From 5bccda0ebc7c0331b81ac47d39e4b920b198b2cd Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 23 Feb 2012 09:37:45 -0500 Subject: cifs: fix dentry refcount leak when opening a FIFO on lookup The cifs code will attempt to open files on lookup under certain circumstances. What happens though if we find that the file we opened was actually a FIFO or other special file? Currently, the open filehandle just ends up being leaked leading to a dentry refcount mismatch and oops on umount. Fix this by having the code close the filehandle on the server if it turns out not to be a regular file. While we're at it, change this spaghetti if statement into a switch too. Cc: stable@vger.kernel.org Reported-by: CAI Qian Tested-by: CAI Qian Reviewed-by: Shirish Pargaonkar Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/dir.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 63a196b97d50..bc7e24420ac0 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -584,10 +584,26 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, * If either that or op not supported returned, follow * the normal lookup. */ - if ((rc == 0) || (rc == -ENOENT)) + switch (rc) { + case 0: + /* + * The server may allow us to open things like + * FIFOs, but the client isn't set up to deal + * with that. If it's not a regular file, just + * close it and proceed as if it were a normal + * lookup. + */ + if (newInode && !S_ISREG(newInode->i_mode)) { + CIFSSMBClose(xid, pTcon, fileHandle); + break; + } + case -ENOENT: posix_open = true; - else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP)) + case -EOPNOTSUPP: + break; + default: pTcon->broken_posix_open = true; + } } if (!posix_open) rc = cifs_get_inode_info_unix(&newInode, full_path, -- cgit v1.2.1 From dcc5abf08a1b783020cb11f37e645177f76e5705 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 14 Feb 2012 21:48:33 -0200 Subject: ARM: mach-pcm038: Fix field name of regulator_consumer_supply struct Building imx_v4_v5_defconfig generates the following error: arch/arm/mach-imx/mach-pcm038.c:236: error: unknown field 'dev' specified in initializer make[1]: *** [arch/arm/mach-imx/mach-pcm038.o] Error 1 Fix it by providing the correct "dev_name" field name. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-pcm038.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 16f126da9f8f..2f3debe2a113 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -233,7 +233,7 @@ static struct regulator_init_data sdhc1_data = { static struct regulator_consumer_supply cam_consumers[] = { { - .dev = NULL, + .dev_name = NULL, .supply = "imx_cam_vcc", }, }; -- cgit v1.2.1 From 940e9ee9f226e0e2b278c5d78180fc39da8e0baa Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 23 Jan 2012 14:16:17 -0200 Subject: ARM: imx_v4_v5_defconfig: Fix the selection of 32 bit flash support for iMX21ADS board commit 1a96571d (Enable 32 bit flash support for iMX21ADS board) aimed to enable 32 bit flash support, but all it did was to delete an unset option. Fix this by enabling CONFIG_MTD_MAP_BANK_WIDTH_4 option. Cc: Jaccon Bastiaansen Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/configs/imx_v4_v5_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index a22e93079063..d88fb87b414d 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -68,6 +68,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y -- cgit v1.2.1 From 9418ba306688c0b77a8548b3281ba3d130036516 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 26 Feb 2012 13:27:04 -0300 Subject: ARM: mach-imx: mx3: Fix section mismatch in imx3_init_l2x0() Fix the following section mismatch: WARNING: vmlinux.o(.text+0x11be8): Section mismatch in reference from the function imx3_init_l2x0() to the function .init.text:l2x0_init() The function imx3_init_l2x0() references the function __init l2x0_init(). This is often because imx3_init_l2x0 lacks a __init annotation or the annotation of l2x0_init is wrong. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mm-imx3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 31807d2a8b7b..8a31e6f5d66a 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -78,7 +78,7 @@ static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, return __arm_ioremap(phys_addr, size, mtype); } -void imx3_init_l2x0(void) +void __init imx3_init_l2x0(void) { void __iomem *l2x0_base; void __iomem *clkctl_base; -- cgit v1.2.1 From 120213728c6407398428a5692cfa5004b520b274 Mon Sep 17 00:00:00 2001 From: Gilles Chanteperdrix Date: Fri, 24 Feb 2012 22:50:50 +0100 Subject: ARM: 7348/1: arm/spear600: fix one-shot timer Currently, the "clockevent_next_event" function only works correctly if the timer is not running when this function is called, which is not always the case when running with CONFIG_HIGH_RES_TIMERS. Fix this by stopping the timer at the beginning of this function. Signed-off-by: Gilles Chanteperdrix Acked-by: Viresh Kumar Acked-by: Stefan Roese Signed-off-by: Russell King --- arch/arm/plat-spear/time.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index 0c77e4298675..abb5bdecd509 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long cycles, struct clock_event_device *clk_event_dev) { - u16 val; + u16 val = readw(gpt_base + CR(CLKEVT)); + + if (val & CTRL_ENABLE) + writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT)); writew(cycles, gpt_base + LOAD(CLKEVT)); - val = readw(gpt_base + CR(CLKEVT)); val |= CTRL_ENABLE | CTRL_INT_ENABLE; writew(val, gpt_base + CR(CLKEVT)); -- cgit v1.2.1 From efbc74ace95338484f8d732037b99c7c77098fce Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Feb 2012 12:12:38 +0100 Subject: ARM: 7345/1: errata: update workaround for A9 erratum #743622 Erratum #743622 affects all r2 variants of the Cortex-A9 processor, so ensure that the workaround is applied regardless of the revision. Cc: Reported-by: Russell King Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- arch/arm/mm/proc-v7.S | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a48aecc17eac..dfb0312f4e73 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622 depends on CPU_V7 help This option enables the workaround for the 743622 Cortex-A9 - (r2p0..r2p2) erratum. Under very rare conditions, a faulty + (r2p*) erratum. Under very rare conditions, a faulty optimisation in the Cortex-A9 Store Buffer may lead to data corruption. This workaround sets a specific bit in the diagnostic register of the Cortex-A9 which disables the Store Buffer diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0404ccbb8aa3..f1c8486f7501 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -230,9 +230,7 @@ __v7_setup: mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #ifdef CONFIG_ARM_ERRATA_743622 - teq r6, #0x20 @ present in r2p0 - teqne r6, #0x21 @ present in r2p1 - teqne r6, #0x22 @ present in r2p2 + teq r5, #0x00200000 @ only present in r2p* mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register -- cgit v1.2.1 From 43a6955fa8c3ac2e7c31959e8b77a1166dbd13f3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Feb 2012 12:13:37 +0100 Subject: ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection Commit fa0ce403 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds") introduced a consistent naming scheme for errata workarounds, but forgot to update the platforms selecting workarounds using the old names. This patch updates ux500 and vexpress to select the appropriate PL310 errata workarounds. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mach-ux500/Kconfig | 2 +- arch/arm/mach-vexpress/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 52af00446a63..c59e8b892d6b 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,7 +5,7 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select ARM_ERRATA_754322 select ARM_ERRATA_764369 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9b3d0fbaee72..88c3ba151e87 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4 select ARM_GIC select ARM_ERRATA_720789 select ARM_ERRATA_751472 - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 -- cgit v1.2.1 From 8ebf0232f8eaeb8008314bb408f9c2818de41106 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 2 Jan 2012 14:11:06 +0000 Subject: of: add picochip vendor prefix Cc: Grant Likely Signed-off-by: Jamie Iles Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ecc6a6cd26c1..a20008ab319a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -30,6 +30,7 @@ national National Semiconductor nintendo Nintendo nvidia NVIDIA nxp NXP Semiconductors +picochip Picochip Ltd powervr Imagination Technologies qcom Qualcomm, Inc. ramtron Ramtron International -- cgit v1.2.1 From d022bbc712eb1fc53fbbec27a9f0ae07f55f9b65 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Wed, 15 Feb 2012 18:55:28 +0100 Subject: of/fdt.c: asm/setup.h included twice drivers/of/fdt.c included 'asm/setup.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka Signed-off-by: Rob Herring --- drivers/of/fdt.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index ea2bd1be2640..91a375fb6ae6 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -23,7 +23,6 @@ #include #endif /* CONFIG_PPC */ -#include #include char *of_fdt_get_string(struct boot_param_header *blob, u32 offset) -- cgit v1.2.1 From e5c7d1f669806289e121b9ac3535e8f6de594b8e Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 27 Feb 2012 14:48:46 +0200 Subject: of/mdio: fix fixed link bus name Since 9e6c643b (phy/fixed: use an unique MDIO bus name) the name of the fixed PHY bus is "fixed-0". Teach of_phy_connect_fixed_link() the new name. Tested on a P1020RDB PowerPC system. Signed-off-by: Baruch Siach Acked-by: Florian Fainelli Signed-off-by: Rob Herring --- drivers/of/of_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 980c079e4443..483c0adcad87 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -182,7 +182,7 @@ struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, if (!phy_id || sz < sizeof(*phy_id)) return NULL; - sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0])); + sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0])); phy = phy_connect(dev, bus_id, hndlr, 0, iface); return IS_ERR(phy) ? NULL : phy; -- cgit v1.2.1 From 14cd3c15cfc8118586262a79bfa3b3123f13e2c2 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 6 Feb 2012 18:29:15 +0100 Subject: doc: dt: Fix broken reference in gpio-leds documentation The gpios property is described in Documentation/devicetree/gpio.txt, so reference this document. Signed-off-by: Tobias Klauser Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/gpio/led.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 141087cf3107..fd2bd56e7195 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device. Each node's name represents the name of the corresponding LED. LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/devicetree/booting-without-of.txt. Active - low LEDs should be indicated using flags in the GPIO specifier. +- gpios : Should specify the LED's GPIO, see "gpios property" in + Documentation/devicetree/gpio.txt. Active low LEDs should be + indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). - linux,default-trigger : (optional) This parameter, if present, is a -- cgit v1.2.1 From cfac337b0fbcad5181096ab72bb24a05bd444562 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 27 Feb 2012 17:31:24 +0100 Subject: ARM: LPC32xx: Fix missing and bad LPC32XX macros Some of the LPC32XX_* macros were typed ("LCP32XX_*"), which is fixed by this patch. (Besides another LCP doc typo.) Further, the LPC32XX_GPIO_P2_MUX_SET/CLR/STATE macros were missing. Signed-off-by: Roland Stigge --- arch/arm/mach-lpc32xx/include/mach/platform.h | 51 ++++++++++++++------------- arch/arm/mach-lpc32xx/pm.c | 2 +- arch/arm/mach-lpc32xx/timer.c | 48 ++++++++++++------------- 3 files changed, 52 insertions(+), 49 deletions(-) diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index 14ea8d1aadb5..c584f5bb164f 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -591,42 +591,42 @@ /* * Timer/counter register offsets */ -#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00) -#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04) -#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08) -#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C) -#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10) -#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14) -#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18) -#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C) -#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20) -#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24) -#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28) -#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C) -#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30) -#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34) -#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38) -#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C) -#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70) +#define LPC32XX_TIMER_IR(x) io_p2v((x) + 0x00) +#define LPC32XX_TIMER_TCR(x) io_p2v((x) + 0x04) +#define LPC32XX_TIMER_TC(x) io_p2v((x) + 0x08) +#define LPC32XX_TIMER_PR(x) io_p2v((x) + 0x0C) +#define LPC32XX_TIMER_PC(x) io_p2v((x) + 0x10) +#define LPC32XX_TIMER_MCR(x) io_p2v((x) + 0x14) +#define LPC32XX_TIMER_MR0(x) io_p2v((x) + 0x18) +#define LPC32XX_TIMER_MR1(x) io_p2v((x) + 0x1C) +#define LPC32XX_TIMER_MR2(x) io_p2v((x) + 0x20) +#define LPC32XX_TIMER_MR3(x) io_p2v((x) + 0x24) +#define LPC32XX_TIMER_CCR(x) io_p2v((x) + 0x28) +#define LPC32XX_TIMER_CR0(x) io_p2v((x) + 0x2C) +#define LPC32XX_TIMER_CR1(x) io_p2v((x) + 0x30) +#define LPC32XX_TIMER_CR2(x) io_p2v((x) + 0x34) +#define LPC32XX_TIMER_CR3(x) io_p2v((x) + 0x38) +#define LPC32XX_TIMER_EMR(x) io_p2v((x) + 0x3C) +#define LPC32XX_TIMER_CTCR(x) io_p2v((x) + 0x70) /* * ir register definitions */ -#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3)) -#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3))) +#define LPC32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3)) +#define LPC32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3))) /* * tcr register definitions */ -#define LCP32XX_TIMER_CNTR_TCR_EN 0x1 -#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2 +#define LPC32XX_TIMER_CNTR_TCR_EN 0x1 +#define LPC32XX_TIMER_CNTR_TCR_RESET 0x2 /* * mcr register definitions */ -#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3)) -#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1)) -#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2)) +#define LPC32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3)) +#define LPC32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1)) +#define LPC32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2)) /* * Standard UART register offsets @@ -690,5 +690,8 @@ #define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130) #define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134) #define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138) +#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) +#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) +#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) #endif diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index b9c80597b7bf..207e81275ff0 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -13,7 +13,7 @@ /* * LPC32XX CPU and system power management * - * The LCP32XX has three CPU modes for controlling system power: run, + * The LPC32XX has three CPU modes for controlling system power: run, * direct-run, and halt modes. When switching between halt and run modes, * the CPU transistions through direct-run mode. For Linux, direct-run * mode is not used in normal operation. Halt mode is used when the diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c index b42c909bbeeb..c40667c33161 100644 --- a/arch/arm/mach-lpc32xx/timer.c +++ b/arch/arm/mach-lpc32xx/timer.c @@ -34,11 +34,11 @@ static int lpc32xx_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) { - __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, - LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, - LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, + LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, + LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); return 0; } @@ -58,7 +58,7 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode, * disable the timer to wait for the first call to * set_next_event(). */ - __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); break; case CLOCK_EVT_MODE_UNUSED: @@ -81,8 +81,8 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &lpc32xx_clkevt; /* Clear match */ - __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), - LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), + LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); evt->event_handler(evt); @@ -128,14 +128,14 @@ static void __init lpc32xx_timer_init(void) clkrate = clkrate / clk_get_pclk_div(); /* Initial timer setup */ - __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), - LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) | - LCP32XX_TIMER_CNTR_MCR_STOP(0) | - LCP32XX_TIMER_CNTR_MCR_RESET(0), - LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); + __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), + LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) | + LPC32XX_TIMER_CNTR_MCR_STOP(0) | + LPC32XX_TIMER_CNTR_MCR_RESET(0), + LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); /* Setup tick interrupt */ setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); @@ -151,14 +151,14 @@ static void __init lpc32xx_timer_init(void) clockevents_register_device(&lpc32xx_clkevt); /* Use timer1 as clock source. */ - __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, - LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, - LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - - clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE), + __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, + LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, + LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + + clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); } -- cgit v1.2.1 From 37891abc8464637964a26ae4b61d307fef831f80 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 27 Feb 2012 11:23:45 -0500 Subject: HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed by AIREN. This keyboard seems to have a lot of bugs; NOGET works around only one of them. Signed-off-by: Alan Stern Reported-by: okias CC: Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index b8574cddd953..63552e30d0c3 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -59,6 +59,9 @@ #define USB_VENDOR_ID_AIRCABLE 0x16CA #define USB_DEVICE_ID_AIRCABLE1 0x1502 +#define USB_VENDOR_ID_AIREN 0x1a2c +#define USB_DEVICE_ID_AIREN_SLIMPLUS 0x0002 + #define USB_VENDOR_ID_ALCOR 0x058f #define USB_DEVICE_ID_ALCOR_USBRS232 0x9720 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index c831af937481..57d4e1e1df48 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -54,6 +54,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, -- cgit v1.2.1 From 8411371709610c826bf65684f886bfdfb5780ca1 Mon Sep 17 00:00:00 2001 From: Jonathan Nieder Date: Tue, 28 Feb 2012 11:51:10 -0700 Subject: x86/PCI: use host bridge _CRS info on MSI MS-7253 In the spirit of commit 29cf7a30f8a0 ("x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by default on a board that needs it. This fixes boot failures and oopses introduced in 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res"). The quirk is quite targetted (to a specific board and BIOS version) for two reasons: (1) to emphasize that this method of tackling the problem one quirk at a time is a little insane (2) to give BIOS vendors an opportunity to use simpler tables and allow us to return to generic behavior (whatever that happens to be) with a later BIOS update In other words, I am not at all happy with having quirks like this. But it is even worse for the kernel not to work out of the box on these machines, so... Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42619 Reported-by: Svante Signell Signed-off-by: Jonathan Nieder Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- arch/x86/pci/acpi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index c33e0970ee9f..7034c081b226 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -60,6 +60,17 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), }, }, + /* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */ + { + .callback = set_use_crs, + .ident = "MSI MS-7253", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7253"), + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "V1.6"), + }, + }, /* Now for the blacklist.. */ -- cgit v1.2.1 From ecb971923614775a118bc05ad16b2bde450cac7d Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Mon, 27 Feb 2012 17:52:52 -0500 Subject: tcp: fix comment for tp->highest_sack MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There was an off-by-one error in the comments describing the highest_sack field in struct tcp_sock. The comments previously claimed that it was the "start sequence of the highest skb with SACKed bit". This commit fixes the comments to note that it is the "start sequence of the skb just *after* the highest skb with SACKed bit". Signed-off-by: Neal Cardwell Acked-by: Ilpo Järvinen Signed-off-by: David S. Miller --- include/linux/tcp.h | 3 ++- include/net/tcp.h | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 46a85c9e1f25..3c7ffdb40dc6 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -412,7 +412,8 @@ struct tcp_sock { struct tcp_sack_block recv_sack_cache[4]; - struct sk_buff *highest_sack; /* highest skb with SACK received + struct sk_buff *highest_sack; /* skb just after the highest + * skb with SACKed bit set * (validity guaranteed only if * sacked_out > 0) */ diff --git a/include/net/tcp.h b/include/net/tcp.h index 42c29bfbcee3..2d80c291fffb 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1364,8 +1364,9 @@ static inline void tcp_push_pending_frames(struct sock *sk) } } -/* Start sequence of the highest skb with SACKed bit, valid only if - * sacked > 0 or when the caller has ensured validity by itself. +/* Start sequence of the skb just after the highest skb with SACKed + * bit, valid only if sacked_out > 0 or when the caller has ensured + * validity by itself. */ static inline u32 tcp_highest_sack_seq(struct tcp_sock *tp) { -- cgit v1.2.1 From 4c90d3b30334833450ccbb02f452d4972a3c3c3f Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sun, 26 Feb 2012 10:06:19 +0000 Subject: tcp: fix false reordering signal in tcp_shifted_skb When tcp_shifted_skb() shifts bytes from the skb that is currently pointed to by 'highest_sack' then the increment of TCP_SKB_CB(skb)->seq implicitly advances tcp_highest_sack_seq(). This implicit advancement, combined with the recent fix to pass the correct SACKed range into tcp_sacktag_one(), caused tcp_sacktag_one() to think that the newly SACKed range was before the tcp_highest_sack_seq(), leading to a call to tcp_update_reordering() with a degree of reordering matching the size of the newly SACKed range (typically just 1 packet, which is a NOP, but potentially larger). This commit fixes this by simply calling tcp_sacktag_one() before the TCP_SKB_CB(skb)->seq advancement that can advance our notion of the highest SACKed sequence. Correspondingly, we can simplify the code a little now that tcp_shifted_skb() should update the lost_cnt_hint in all cases where skb == tp->lost_skb_hint. Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 53c8ce4046b2..ee42d42b2f45 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1403,8 +1403,16 @@ static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb, BUG_ON(!pcount); - /* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */ - if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint)) + /* Adjust counters and hints for the newly sacked sequence + * range but discard the return value since prev is already + * marked. We must tag the range first because the seq + * advancement below implicitly advances + * tcp_highest_sack_seq() when skb is highest_sack. + */ + tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked, + start_seq, end_seq, dup_sack, pcount); + + if (skb == tp->lost_skb_hint) tp->lost_cnt_hint += pcount; TCP_SKB_CB(prev)->end_seq += shifted; @@ -1430,12 +1438,6 @@ static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb, skb_shinfo(skb)->gso_type = 0; } - /* Adjust counters and hints for the newly sacked sequence range but - * discard the return value since prev is already marked. - */ - tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked, - start_seq, end_seq, dup_sack, pcount); - /* Difference in this won't matter, both ACKed by the same cumul. ACK */ TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS); -- cgit v1.2.1 From ccdeed6281296977f67f57d048fdeec542428ce1 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 23 Feb 2012 12:28:29 +0530 Subject: ARM: OMAP: fix section mismatch warning for omap4_hotplug_cpu() WARNING: arch/arm/mach-omap2/built-in.o(.text+0x8b80): Section mismatch in reference from the function omap4_hotplug_cpu() to the function .cpuinit.text:omap_secondary_startup() The function omap4_hotplug_cpu() references the function __cpuinit omap_secondary_startup(). This is often because omap4_hotplug_cpu lacks a __cpuinit annotation or the annotation of omap_secondary_startup is wrong. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-mpuss-lowpower.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 1d5d01056558..fe9ab7c58fae 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -300,7 +300,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * @cpu : CPU ID * @power_state: CPU low power state. */ -int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; -- cgit v1.2.1 From 82dfcbfe63500c80335d0cd5f91a35d4545a1fb2 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 22 Feb 2012 16:10:04 +0530 Subject: ARM: OMAP: Fix section mismatch warning for platform_cpu_die() WARNING: vmlinux.o(.text+0x226d0): Section mismatch in reference from the function platform_cpu_die() to the function .cpuinit.text:omap4_hotplug_cpu() The function platform_cpu_die() references the function __cpuinit omap4_hotplug_cpu(). This is often because platform_cpu_die lacks a __cpuinit annotation or the annotation of omap4_hotplug_cpu is wrong. Thanks to Russell King for suggesting to use __ref instead of the initial (and wrong) approach to use __cpuinit. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-hotplug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index adbe4d8c7caf..56c345b8b931 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -33,7 +33,7 @@ int platform_cpu_kill(unsigned int cpu) * platform-specific code to shutdown a CPU * Called with IRQs disabled */ -void platform_cpu_die(unsigned int cpu) +void __ref platform_cpu_die(unsigned int cpu) { unsigned int this_cpu; -- cgit v1.2.1 From d82ba9954b6b2c4ac91ec6f6f42be8c5215d0619 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 23 Feb 2012 09:44:41 +0200 Subject: OMAP4: dma: Correct CPU version check for dma_common_ch_end CCDN is the last common channel register in all OMAP4 versions. Use cpu_is_omap44xx() instead of the cpu_is_omap4430(). cpu_is_omap4430() returns 0 unconditionally. This causes that the dma_common_ch_end register variable is not configured correctly on OMAP4, not even for OMAP4430. Because of this, registers between CCFN - CCDN will be not cleard in the omap2_clear_dma function in OMAP4. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index a59a45a0096e..b19d8496c16e 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -227,7 +227,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) dma_stride = OMAP2_DMA_STRIDE; dma_common_ch_start = CSDP; - if (cpu_is_omap3630() || cpu_is_omap4430()) + if (cpu_is_omap3630() || cpu_is_omap44xx()) dma_common_ch_end = CCDN; else dma_common_ch_end = CCFN; -- cgit v1.2.1 From 5a3ff8473c9100adb06d60e52477668d1504e8cf Mon Sep 17 00:00:00 2001 From: "Cousson, Benoit" Date: Tue, 28 Feb 2012 14:10:09 +0100 Subject: ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts The following commit: 2f31b51659c2d8315ea2888ba5b93076febe672b Author: Tero Kristo Date: Fri Dec 16 14:37:00 2011 -0700 ARM: OMAP4: PRM: use PRCM interrupt handler introduced the PRCM interrupt handler and thus the need for 64 more interrupts. Since SPARSE_IRQ is still not fully functional on OMAP, the NR_IRQS needs to be updated to avoid the failure that happen during irq_alloc_descs call inside the PRCM driver: [ 0.208221] PRCM: failed to allocate irq descs: -12 Later the mux framework is then unable to request an IRQ from the PRCM interrupt handler. [ 1.802795] mux: Failed to setup hwmod io irq -22 Fix that by adding 64 more interrupts for OMAP2PLUS config. Signed-off-by: Benoit Cousson Cc: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/irqs.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 2efd6454bce0..37bbbbb981b2 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,8 +428,16 @@ #define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) +/* PRCM IRQ handler */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) +#define OMAP_PRCM_NR_IRQS 64 +#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) +#else +#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END +#endif -#define NR_IRQS OMAP_GPMC_IRQ_END +#define NR_IRQS OMAP_PRCM_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) -- cgit v1.2.1 From d867093d412c32e246570e6d07bd987b067d688d Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 28 Feb 2012 15:02:34 +0530 Subject: ARM: OMAP2+: Remove apply_uV constraints for fixed regulator VUSB is a fixed regulator, so get rid of the apply_uV constraint for it, which fixes the following error seen at boot on omap4 SDP and PANDA boards. machine_constraints_voltage: VUSB: failed to apply 3300000uV constraint twl_reg twl_reg.46: can't register VUSB, -22 twl_reg: probe of twl_reg.46 failed with error -22 Signed-off-by: Rajendra Nayak Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/twl-common.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 10b20c652e5d..4b57757bf9d1 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE -- cgit v1.2.1 From 25cb3b4cf0ac65565384d10110ffa36018d83792 Mon Sep 17 00:00:00 2001 From: Ola Lilja Date: Mon, 30 Jan 2012 15:18:14 +0100 Subject: ARM: ux500: Add placeholder for clk_set_parent Calling clk_set_parent (e.g. from Ux500 ASoC-driver) generates build-errors. Signed-off-by: Ola Lilja Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/clock.c | 7 +++++++ arch/arm/mach-ux500/clock.h | 1 + 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 737907537004..ec35f0aa5665 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -223,6 +223,13 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + /*TODO*/ + return -ENOSYS; +} +EXPORT_SYMBOL(clk_set_parent); + static void clk_prcmu_enable(struct clk *clk) { void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h index 074490705229..d776ada08dbf 100644 --- a/arch/arm/mach-ux500/clock.h +++ b/arch/arm/mach-ux500/clock.h @@ -21,6 +21,7 @@ struct clkops { void (*enable) (struct clk *); void (*disable) (struct clk *); unsigned long (*get_rate) (struct clk *); + int (*set_parent)(struct clk *, struct clk *); }; /** -- cgit v1.2.1 From f629a7aef8424448758edfce36a810434227f070 Mon Sep 17 00:00:00 2001 From: Ola Lilja Date: Mon, 30 Jan 2012 15:18:22 +0100 Subject: ARM: ux500: Add DMA-channels for MSP Add DMA-channels for MSP0, MSP1, MSP2 and MSP3. Signed-off-by: Ola Lilja Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/devices-db8500.c | 6 ++++++ arch/arm/mach-ux500/include/mach/hardware.h | 2 ++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index a7c6cdc9b11e..6e66d3777ed5 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -101,6 +101,9 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV41_SD_MM3_TX] = -1, [DB8500_DMA_DEV42_SD_MM4_TX] = -1, [DB8500_DMA_DEV43_SD_MM5_TX] = -1, + [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, }; /* Mapping between source event lines and physical device address */ @@ -133,6 +136,9 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV41_SD_MM3_RX] = -1, [DB8500_DMA_DEV42_SD_MM4_RX] = -1, [DB8500_DMA_DEV43_SD_MM5_RX] = -1, + [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, }; /* Reserved event lines for memcpy only */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index b6ba26a1367d..d93d6dbef25b 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -30,6 +30,8 @@ #include #include +#define MSP_TX_RX_REG_OFFSET 0 + #ifndef __ASSEMBLY__ #include -- cgit v1.2.1 From 29bd2ab86646cac01e20f28017c46918ec69fc28 Mon Sep 17 00:00:00 2001 From: Ola Lilja Date: Wed, 1 Feb 2012 14:18:10 +0100 Subject: ARM: ux500: Add audio-regulators Add regulators Vaud, Vamic1, Vamic2 and Vdmic used by audio. Signed-off-by: Ola Lilja Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 28 +++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2735d03996cf..52426a425787 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -74,6 +74,26 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), }; +static struct regulator_consumer_supply ab8500_vaud_consumers[] = { + /* AB8500 audio-codec main supply */ + REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { + /* AB8500 audio-codec Mic1 supply */ + REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { + /* AB8500 audio-codec Mic2 supply */ + REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { + /* AB8500 audio-codec DMic supply */ + REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), +}; + static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { /* SoC core supply, no device */ REGULATOR_SUPPLY("v-intcore", NULL), @@ -323,6 +343,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AUD", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, }, /* supply for v-anamic1 VAMic1-LDO */ [AB8500_LDO_ANAMIC1] = { @@ -330,6 +352,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AMIC1", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, }, /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ [AB8500_LDO_ANAMIC2] = { @@ -337,6 +361,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AMIC2", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, }, /* supply for v-dmic, VDMIC LDO */ [AB8500_LDO_DMIC] = { @@ -344,6 +370,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-DMIC", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), + .consumer_supplies = ab8500_vdmic_consumers, }, /* supply for v-intcore12, VINTCORE12 LDO */ [AB8500_LDO_INTCORE] = { -- cgit v1.2.1 From 70227a45d004cbbf77d6a38764092a580e8360d4 Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Mon, 13 Feb 2012 10:51:22 +0100 Subject: ARM: ux500: set ARCH_NR_GPIO to 355 on U8500 platforms This is due to the increased number of AB8500 GPIOs. Signed-off-by: Philippe Langlais Signed-off-by: Linus Walleij --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a48aecc17eac..b145d67a1288 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1577,7 +1577,7 @@ config LOCAL_TIMERS config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 350 if ARCH_U8500 + default 355 if ARCH_U8500 default 0 help Maximum number of GPIOs in the system. -- cgit v1.2.1 From a1524eeb64c611995941ed570477cfd895da6bcd Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Mon, 13 Feb 2012 10:52:25 +0100 Subject: ARM: ux500: fix around AB8500 GPIO macro name AB8500 GPIO1 is the base of AB8500 gpio number too. Signed-off-by: Philippe Langlais Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 2 +- arch/arm/mach-ux500/board-mop500.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 5c00712907d1..6d672a556df8 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -72,7 +72,7 @@ static struct platform_device snowball_led_dev = { }; static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { - .gpio_base = MOP500_AB8500_GPIO(0), + .gpio_base = MOP500_AB8500_PIN_GPIO(1), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, /* config_reg is the initial configuration of ab8500 pins. * The pins can be configured as GPIO or alt functions based diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index f926d3db6207..7ff6cbffc104 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -63,7 +63,7 @@ * because the AB8500 GPIO pins are enumbered starting from 1, so the value in * parens matches the GPIO pin number in the data sheet. */ -#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1) +#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1) /*Snowball AB8500 GPIO */ #define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */ #define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */ -- cgit v1.2.1 From 0e62f9f4961167005718ddc443c2adeccf02c4e6 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Wed, 15 Feb 2012 20:19:38 +0100 Subject: ARM: ux500: included linux/gpio.h twice arch/arm/mach-ux500/board-mop500-u8500uib.c included 'linux/gpio.h' remove the duplicate. Signed-off-by: Danny Kukawka Acked-by: Srinidhi Kasagar Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-u8500uib.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index feb5744d98b7..ead91c968ff4 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.1 From 67ae14fcaf1b73ffd91feff630dc5911b20d5394 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 25 Feb 2012 12:48:49 -0700 Subject: ARM: ux500: U8500 depends on MMU There is no way to build U8500 kernels without an MMU at this point because of dependencies on MMU-only functions. As long as nobody is interested in fixing this, let's just disable the platforms for nommu kernels. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier Signed-off-by: Linus Walleij --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b145d67a1288..e575b608dd4e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -901,6 +901,7 @@ config ARCH_U300 config ARCH_U8500 bool "ST-Ericsson U8500 Series" + depends on MMU select CPU_V7 select ARM_AMBA select GENERIC_CLOCKEVENTS -- cgit v1.2.1 From ded547a443723f0f29bce513356fe10f96cae315 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 25 Feb 2012 12:48:50 -0700 Subject: ARM: ux500: add board autoselection At least one platform needs to be selected, so pick the u8500 development board if nothing else is selected. The first menu to choose the actual platform is meaningless and can be made invisible. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 52af00446a63..34b631446dd3 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -9,46 +9,50 @@ config UX500_SOC_COMMON select ARM_ERRATA_754322 select ARM_ERRATA_764369 -menu "Ux500 SoC" - config UX500_SOC_DB5500 - bool "DB5500" + bool select MFD_DB5500_PRCMU config UX500_SOC_DB8500 - bool "DB8500" + bool select MFD_DB8500_PRCMU select REGULATOR_DB8500_PRCMU -endmenu - menu "Ux500 target platform (boards)" config MACH_U8500 bool "U8500 Development platform" - depends on UX500_SOC_DB8500 + select UX500_SOC_DB8500 select TPS6105X help Include support for the mop500 development platform. config MACH_HREFV60 bool "U85000 Development platform, HREFv60 version" - depends on UX500_SOC_DB8500 + select UX500_SOC_DB8500 help Include support for the HREFv60 new development platform. config MACH_SNOWBALL bool "U8500 Snowball platform" - depends on UX500_SOC_DB8500 select MACH_U8500 help Include support for the snowball development platform. config MACH_U5500 bool "U5500 Development platform" - depends on UX500_SOC_DB5500 + select UX500_SOC_DB5500 help Include support for the U5500 development platform. + +config UX500_AUTO_PLATFORM + def_bool y + depends on !MACH_U5500 + select MACH_U8500 + help + At least one platform needs to be selected in order to build + a working kernel. If everything else is disabled, this + automatically enables MACH_U8500. endmenu config UX500_DEBUG_UART -- cgit v1.2.1 From 68526e586307faadc49c27406dad3cb93f067eb0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 25 Feb 2012 12:48:52 -0700 Subject: ARM: ux500: select L2X0 cache on ux500 The cache controller needs to be enabled for the cortex-a9 specific errata that are also selected to work. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 34b631446dd3..41b38bb96eb5 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -8,6 +8,7 @@ config UX500_SOC_COMMON select ARM_ERRATA_753970 select ARM_ERRATA_754322 select ARM_ERRATA_764369 + select CACHE_L2X0 config UX500_SOC_DB5500 bool -- cgit v1.2.1 From 2c43ee4481689586be3430684f543f53ab3dfe35 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 25 Feb 2012 12:48:53 -0700 Subject: ARM: ux500: select CPU_FREQ_TABLE where needed The ux500 platform requires CPU_FREQ_TABLE support to be enabled for its CPU_FREQ implementations, so automatically select that when CPU_FREQ is enabled. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier [Rebased due to missing other patches in the stack] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 41b38bb96eb5..94d80a4e4370 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -18,6 +18,7 @@ config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU select REGULATOR_DB8500_PRCMU + select CPU_FREQ_TABLE if CPU_FREQ menu "Ux500 target platform (boards)" -- cgit v1.2.1 From 382bd12528777be5236acf0a19e016aebfc9a34a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 29 Feb 2012 18:01:11 +0100 Subject: ARM: ux500: delete TPS6105X selection Having this driver selected here only cause problems, get it out of there and selected it from menuconfig or wherever instead. Mea culpa. Cc: Mathieu Poirer Cc: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 94d80a4e4370..d00881297202 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -25,7 +25,6 @@ menu "Ux500 target platform (boards)" config MACH_U8500 bool "U8500 Development platform" select UX500_SOC_DB8500 - select TPS6105X help Include support for the mop500 development platform. -- cgit v1.2.1 From b9eaa81af2fdc0b710c7afb7d3e425ea27133b72 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 10 Oct 2011 14:55:17 +0200 Subject: ARM: at91/dma: remove platform data from DMA controller DMA controller can deduce its configuration data from the platform. Remove the platform data and match device types with the compatible ones. Signed-off-by: Nicolas Ferre Acked-by: Grant Likely --- arch/arm/mach-at91/at91sam9g45_devices.c | 9 +-------- arch/arm/mach-at91/at91sam9rl_devices.c | 8 +------- 2 files changed, 2 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd10dc3..07708d422681 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -38,10 +38,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 8, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9G45_BASE_DMA, @@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9g45_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -69,8 +64,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); - dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 61908dce9784..9be71c11d0f0 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -33,10 +33,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 2, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9RL_BASE_DMA, @@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9rl_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else -- cgit v1.2.1 From 851c52b23c5c27047f1438684750e28c44d73191 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 10 Oct 2011 16:50:43 +0200 Subject: ARM: at91/dma: DMA controller registering with DT support Device tree support on at91sam9g45 family SoC. Only call platform_device_register() if no dma-controller node is found in device tree. Signed-off-by: Nicolas Ferre Acked-by: Grant Likely --- arch/arm/mach-at91/at91sam9g45_devices.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 07708d422681..96e2adcd5a84 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -64,7 +64,15 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - platform_device_register(&at_hdmac_device); +#if defined(CONFIG_OF) + struct device_node *of_node = + of_find_node_by_name(NULL, "dma-controller"); + + if (of_node) + of_node_put(of_node); + else +#endif + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} -- cgit v1.2.1 From 5017f1cd9b980c3975d25ca530a578281e91aa04 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 29 Feb 2012 18:15:20 +0100 Subject: ARM: ux500: solve some Kconfig mess First rename the config option MACH_U8500 to MACH_MOP500 because that is what it's obviously all about, this has confused me for the last time. Fix some whitespace in the process. Since the machine descriptors for HREFv60 and snowball are clearly in the file board-mop500.c which only compiles if MACH_MOP500 (former MACH_U8500) is set, select this for the board variants and nothing else. For the MOP500 variants the UIB (user interface board) is probed using I2C so select I2C and I2C_NOMADIK so we know that this probe will always be successful. Cc: Arnd Bergmann Cc: Mathieu Poirier Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 23 +++++++++++++---------- arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/include/mach/irqs.h | 2 +- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index d00881297202..d205de47d3c6 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -22,21 +22,24 @@ config UX500_SOC_DB8500 menu "Ux500 target platform (boards)" -config MACH_U8500 - bool "U8500 Development platform" +config MACH_MOP500 + bool "U8500 Development platform, MOP500 versions" select UX500_SOC_DB8500 + select I2C + select I2C_NOMADIK help - Include support for the mop500 development platform. + Include support for the MOP500 development platform. config MACH_HREFV60 - bool "U85000 Development platform, HREFv60 version" - select UX500_SOC_DB8500 - help - Include support for the HREFv60 new development platform. + bool "U8500 Development platform, HREFv60 version" + select MACH_MOP500 + help + Include support for the HREFv60 new development platform. + Includes HREFv70, v71 etc. config MACH_SNOWBALL bool "U8500 Snowball platform" - select MACH_U8500 + select MACH_MOP500 help Include support for the snowball development platform. @@ -49,11 +52,11 @@ config MACH_U5500 config UX500_AUTO_PLATFORM def_bool y depends on !MACH_U5500 - select MACH_U8500 + select MACH_MOP500 help At least one platform needs to be selected in order to build a working kernel. If everything else is disabled, this - automatically enables MACH_U8500. + automatically enables MACH_MOP500. endmenu config UX500_DEBUG_UART diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 6bd2f451c185..8dd75f210d2b 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -7,7 +7,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ +obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 9db68d264c5f..c23a6b5f0c4e 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -43,7 +43,7 @@ /* This will be overridden by board-specific irq headers */ #define IRQ_BOARD_END IRQ_BOARD_START -#ifdef CONFIG_MACH_U8500 +#ifdef CONFIG_MACH_MOP500 #include #endif -- cgit v1.2.1 From 992d52529d7840236d3059b51c15d5eb9e81a869 Mon Sep 17 00:00:00 2001 From: Nicolas Cavallari Date: Thu, 23 Feb 2012 16:53:34 +0100 Subject: carl9170: Fix memory accounting when sta is in power-save mode. On Access Point mode, when transmitting a packet, if the destination station is in powersave mode, we abort transmitting the packet to the device queue, but we do not reclaim the allocated memory. Given enough packets, we can go in a state where there is no packet on the device queue, but we think the device has no memory left, so no packet gets transmitted, connections breaks and the AP stops working. This undo the allocation done in the TX path when the station is in power-save mode. Signed-off-by: Nicolas Cavallari Acked-by: Christian Lamparter Cc: stable Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index d19a9ee9d057..22a793121bd3 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1251,6 +1251,7 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) atomic_dec(&ar->tx_ampdu_upload); tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + carl9170_release_dev_space(ar, skb); carl9170_tx_status(ar, skb, false); return true; } -- cgit v1.2.1 From 9926a67557532acb6cddb1c1add02952175b5c72 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 25 Feb 2012 21:36:36 +0100 Subject: carl9170: fix frame delivery if sta is in powersave mode Nicolas Cavallari discovered that carl9170 has some serious problems delivering data to sleeping stations. It turns out that the driver was not honoring two important flags (IEEE80211_TX_CTL_POLL_RESPONSE and IEEE80211_TX_CTL_CLEAR_PS_FILT) which are set on frames that should be sent although the receiving station is still in powersave mode. Cc: stable Reported-by: Nicolas Cavallari Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index 22a793121bd3..bbc813dee983 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1234,6 +1234,7 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) { struct ieee80211_sta *sta; struct carl9170_sta_info *sta_info; + struct ieee80211_tx_info *tx_info; rcu_read_lock(); sta = __carl9170_get_tx_sta(ar, skb); @@ -1241,12 +1242,13 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) goto out_rcu; sta_info = (void *) sta->drv_priv; - if (unlikely(sta_info->sleeping)) { - struct ieee80211_tx_info *tx_info; + tx_info = IEEE80211_SKB_CB(skb); + if (unlikely(sta_info->sleeping) && + !(tx_info->flags & (IEEE80211_TX_CTL_POLL_RESPONSE | + IEEE80211_TX_CTL_CLEAR_PS_FILT))) { rcu_read_unlock(); - tx_info = IEEE80211_SKB_CB(skb); if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) atomic_dec(&ar->tx_ampdu_upload); -- cgit v1.2.1 From 00f157b49780e194c38dafdf9df8e10b8a6a9626 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 24 Feb 2012 21:35:35 -0800 Subject: mwifiex: reset encryption mode flag before association Recent commit "mwifiex: clear previous security setting during association" fixes association failure problems observed in some corner cases by clearing previous security setting before each association. We should reset encryption mode flag as well. This patch takes care of it. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 5b2972b43b0e..2210a0f9af2d 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -846,6 +846,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, priv->sec_info.wpa_enabled = false; priv->sec_info.wpa2_enabled = false; priv->wep_key_curr_index = 0; + priv->sec_info.encryption_mode = 0; ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); if (mode == NL80211_IFTYPE_ADHOC) { -- cgit v1.2.1 From 65ec698d1368fc64d0b93fb703783d25ec550577 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 28 Feb 2012 23:33:37 +0000 Subject: tg3: Fix tg3_get_stats64 for 5700 / 5701 devs tg3_get_stats64() takes tp->lock when dealing with non-serdes bcm5700 and bcm5701 devices. However, functions that call tg3_halt() have already acquired tp->lock. When tg3_get_stats64() is called in tg3_halt(), deadlock will occur. This patch fixes the problem by separating the stat gathering code into a new tg3_get_nstats() function. tg3_get_stats64() is recoded to call this function and take tp->lock. The code that takes tp->lock in tg3_calc_crc_errors() has been removed. Function signatures have been cleaned up too. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 45 +++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a1f2e0fed78b..423d0235a878 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -7886,10 +7886,8 @@ static int tg3_chip_reset(struct tg3 *tp) return 0; } -static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *, - struct rtnl_link_stats64 *); -static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *, - struct tg3_ethtool_stats *); +static void tg3_get_nstats(struct tg3 *, struct rtnl_link_stats64 *); +static void tg3_get_estats(struct tg3 *, struct tg3_ethtool_stats *); /* tp->lock is held. */ static int tg3_halt(struct tg3 *tp, int kind, int silent) @@ -7910,7 +7908,7 @@ static int tg3_halt(struct tg3 *tp, int kind, int silent) if (tp->hw_stats) { /* Save the stats across chip resets... */ - tg3_get_stats64(tp->dev, &tp->net_stats_prev), + tg3_get_nstats(tp, &tp->net_stats_prev), tg3_get_estats(tp, &tp->estats_prev); /* And make sure the next sample is new data */ @@ -9847,7 +9845,7 @@ static inline u64 get_stat64(tg3_stat64_t *val) return ((u64)val->high << 32) | ((u64)val->low); } -static u64 calc_crc_errors(struct tg3 *tp) +static u64 tg3_calc_crc_errors(struct tg3 *tp) { struct tg3_hw_stats *hw_stats = tp->hw_stats; @@ -9856,14 +9854,12 @@ static u64 calc_crc_errors(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { u32 val; - spin_lock_bh(&tp->lock); if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) { tg3_writephy(tp, MII_TG3_TEST1, val | MII_TG3_TEST1_CRC_EN); tg3_readphy(tp, MII_TG3_RXR_COUNTERS, &val); } else val = 0; - spin_unlock_bh(&tp->lock); tp->phy_crc_errors += val; @@ -9877,14 +9873,13 @@ static u64 calc_crc_errors(struct tg3 *tp) estats->member = old_estats->member + \ get_stat64(&hw_stats->member) -static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp, - struct tg3_ethtool_stats *estats) +static void tg3_get_estats(struct tg3 *tp, struct tg3_ethtool_stats *estats) { struct tg3_ethtool_stats *old_estats = &tp->estats_prev; struct tg3_hw_stats *hw_stats = tp->hw_stats; if (!hw_stats) - return old_estats; + return; ESTAT_ADD(rx_octets); ESTAT_ADD(rx_fragments); @@ -9963,20 +9958,13 @@ static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp, ESTAT_ADD(nic_tx_threshold_hit); ESTAT_ADD(mbuf_lwm_thresh_hit); - - return estats; } -static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, - struct rtnl_link_stats64 *stats) +static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats) { - struct tg3 *tp = netdev_priv(dev); struct rtnl_link_stats64 *old_stats = &tp->net_stats_prev; struct tg3_hw_stats *hw_stats = tp->hw_stats; - if (!hw_stats) - return old_stats; - stats->rx_packets = old_stats->rx_packets + get_stat64(&hw_stats->rx_ucast_packets) + get_stat64(&hw_stats->rx_mcast_packets) + @@ -10019,15 +10007,13 @@ static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, get_stat64(&hw_stats->tx_carrier_sense_errors); stats->rx_crc_errors = old_stats->rx_crc_errors + - calc_crc_errors(tp); + tg3_calc_crc_errors(tp); stats->rx_missed_errors = old_stats->rx_missed_errors + get_stat64(&hw_stats->rx_discards); stats->rx_dropped = tp->rx_dropped; stats->tx_dropped = tp->tx_dropped; - - return stats; } static inline u32 calc_crc(unsigned char *buf, int len) @@ -15409,6 +15395,21 @@ static void __devinit tg3_init_coal(struct tg3 *tp) } } +static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + struct tg3 *tp = netdev_priv(dev); + + if (!tp->hw_stats) + return &tp->net_stats_prev; + + spin_lock_bh(&tp->lock); + tg3_get_nstats(tp, stats); + spin_unlock_bh(&tp->lock); + + return stats; +} + static const struct net_device_ops tg3_netdev_ops = { .ndo_open = tg3_open, .ndo_stop = tg3_close, -- cgit v1.2.1 From c2d1355476b555b54c26d20962211fcf06b8c55f Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 23 Jan 2012 13:26:47 +0530 Subject: ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision Add missing break statement in the function omap3xxx_check_revision. The commit id 4390f5b2cb1f56 [ARM: OMAP: TI814X: Add cpu type macros and detection support], removed the 'break' statement from the function omap3xxx_check_revision(), resulting into wrong omap/cpu_revision initialization for AM335x devices. Signed-off-by: Vaibhav Hiremath [tony@atomide.com: refreshed to apply after changes to cpu_rev] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 6c5826605eae..719ee423abe2 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev) case 0xb944: omap_revision = AM335X_REV_ES1_0; *cpu_rev = "1.0"; + break; case 0xb8f2: switch (rev) { case 0: -- cgit v1.2.1 From ac5ff1b358ab6813654fea69e739bf0a66c1b002 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 29 Feb 2012 15:37:59 +0000 Subject: mfd: Correct readability of WM8994 DC servo 4E register It should be marked as readable but wasn't, breaking DC servo operation. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-regmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c index c598ae69b8ff..bc0c5096539a 100644 --- a/drivers/mfd/wm8994-regmap.c +++ b/drivers/mfd/wm8994-regmap.c @@ -806,6 +806,7 @@ static bool wm1811_readable_register(struct device *dev, unsigned int reg) case WM8994_DC_SERVO_2: case WM8994_DC_SERVO_READBACK: case WM8994_DC_SERVO_4: + case WM8994_DC_SERVO_4E: case WM8994_ANALOGUE_HP_1: case WM8958_MIC_DETECT_1: case WM8958_MIC_DETECT_2: -- cgit v1.2.1 From c65d8ef2e7158ba521e9cb1ce10ff468b8ddcb6a Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 1 Mar 2012 13:19:21 +0900 Subject: ARM: SAMSUNG: Fix memory size for hsotg The device link core registers for hsotg is base + 0000h ~ base + 11000h. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park [Rebased on the newest git/kgene/linux-samsung #for-next] Signed-off-by: Lukasz Majewski Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index f10768e988d4..d21d744e4d99 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) #ifdef CONFIG_S3C_DEV_USB_HSOTG static struct resource s3c_usb_hsotg_resources[] = { - [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K), + [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K), [1] = DEFINE_RES_IRQ(IRQ_OTG), }; -- cgit v1.2.1 From c1ba544f81544ed9613ad5d058968533dbcef4b2 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 1 Mar 2012 13:23:32 +0900 Subject: ARM: S3C24XX: Fix restart on S3C2442 Commit b27b072791dc (ARM: 7265/1: restart: S3C24XX: use new restart hook) introduced the new restart hook also for the S3C244x cpus, but it was only defined in the S3C2440 scope, i.e. when CPU_S3C2440 was selected. Devices using the S3C2442 like the GTA02 normally don't select this CPU which leads to compilation errors like: LD .tmp_vmlinux1 arch/arm/mach-s3c2440/built-in.o:(.arch.info.init+0x3c): undefined reference to `s3c2440_restart' make: *** [.tmp_vmlinux1] Error 1 Therefore move the s3c2440_restart function to s3c244x.c which is common to both cpus and also fix the naming to reflect this. Reported-and-tested-by: Denis 'GNUtoo' Carikli Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/common.h | 2 +- arch/arm/mach-s3c2440/mach-anubis.c | 2 +- arch/arm/mach-s3c2440/mach-at2440evb.c | 2 +- arch/arm/mach-s3c2440/mach-gta02.c | 2 +- arch/arm/mach-s3c2440/mach-mini2440.c | 2 +- arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 2 +- arch/arm/mach-s3c2440/mach-rx1950.c | 2 +- arch/arm/mach-s3c2440/mach-rx3715.c | 2 +- arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +- arch/arm/mach-s3c2440/s3c2440.c | 13 ------------- arch/arm/mach-s3c2440/s3c244x.c | 11 +++++++++++ 12 files changed, 21 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h index db8a98ac68c5..0c1eb1dfc534 100644 --- a/arch/arm/mach-s3c2440/common.h +++ b/arch/arm/mach-s3c2440/common.h @@ -12,6 +12,6 @@ #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H #define __ARCH_ARM_MACH_S3C2440_COMMON_H -void s3c2440_restart(char mode, const char *cmd); +void s3c244x_restart(char mode, const char *cmd); #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 24569550de1a..19b577bc09b8 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index d6a9763110cd..d7ae49c90118 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 5859e609d28c..9a4a5bc008e6 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index adbbb85bc4cd..5d66fb218a41 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440") .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 40eaf844bc1f..5198e3e1c5be 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 4c480ef734f6..c5daeb612a88 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 80077f6472ee..6f68abf44fab 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 20103bafbd4b..56af35447598 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 1deb60d12a60..83a1036d7dcb 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440") .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 517623a09fc5..2b3dddb49af7 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include @@ -74,15 +73,3 @@ void __init s3c2440_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } - -void s3c2440_restart(char mode, const char *cmd) -{ - if (mode == 's') { - soft_restart(0); - } - - arch_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 36bc60f61d0a..744930a870eb 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -46,6 +46,7 @@ #include #include #include +#include static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), @@ -196,3 +197,13 @@ struct syscore_ops s3c244x_pm_syscore_ops = { .suspend = s3c244x_suspend, .resume = s3c244x_resume, }; + +void s3c244x_restart(char mode, const char *cmd) +{ + if (mode == 's') + soft_restart(0); + + arch_wdt_reset(); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); -- cgit v1.2.1 From a97f4f5e524bcd09a85ef0b8821a14d35e69335f Mon Sep 17 00:00:00 2001 From: Jonathan Nieder Date: Tue, 28 Feb 2012 15:31:35 -0600 Subject: x86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS version Carlos was getting WARNING: at drivers/pci/pci.c:118 pci_ioremap_bar+0x24/0x52() when probing his sound card, and sound did not work. After adding pci=use_crs to the kernel command line, no more trouble. Ok, we can add a quirk. dmidecode output reveals that this is an MSI MS-7253, for which we already have a quirk, but the short-sighted author tied the quirk to a single BIOS version, making it not kick in on Carlos's machine with BIOS V1.2. If a later BIOS update makes it no longer necessary to look at the _CRS info it will still be harmless, so let's stop trying to guess which versions have and don't have accurate _CRS tables. Addresses https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5533 Also see . Reported-by: Carlos Luna Reviewed-by: Bjorn Helgaas Signed-off-by: Jonathan Nieder Signed-off-by: Jesse Barnes --- arch/x86/pci/acpi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 7034c081b226..49a5cb55429b 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -68,7 +68,6 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = { DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), DMI_MATCH(DMI_BOARD_NAME, "MS-7253"), DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "V1.6"), }, }, -- cgit v1.2.1 From 73f98eab9b9e0bab492ca06add5657d9e702ddb1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 29 Feb 2012 21:17:08 +0000 Subject: pch_gbe: memory corruption calling pch_gbe_validate_option() pch_gbe_validate_option() modifies 32 bits of memory but we pass &hw->phy.autoneg_advertised which only has 16 bits and &hw->mac.fc which only has 8 bits. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c index 9cb5f912e489..29e23bec809c 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c @@ -321,10 +321,10 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter) pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n"); hw->phy.autoneg_advertised = opt.def; } else { - hw->phy.autoneg_advertised = AutoNeg; - pch_gbe_validate_option( - (int *)(&hw->phy.autoneg_advertised), - &opt, adapter); + int tmp = AutoNeg; + + pch_gbe_validate_option(&tmp, &opt, adapter); + hw->phy.autoneg_advertised = tmp; } } @@ -495,9 +495,10 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter) .arg = { .l = { .nr = (int)ARRAY_SIZE(fc_list), .p = fc_list } } }; - hw->mac.fc = FlowControl; - pch_gbe_validate_option((int *)(&hw->mac.fc), - &opt, adapter); + int tmp = FlowControl; + + pch_gbe_validate_option(&tmp, &opt, adapter); + hw->mac.fc = tmp; } pch_gbe_check_copper_options(adapter); -- cgit v1.2.1 From 413708bbaf5c85c4c8a264145f7d6c3afcd97f99 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 29 Feb 2012 21:19:54 +0000 Subject: enic: fix an endian bug in enic_probe() "num_vfs" is a u32 but we only use the high 16 bits and the low 16bits are left as zero. That isn't a problem for little endian systems but it will break on big endian ones. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic.h | 2 +- drivers/net/ethernet/cisco/enic/enic_main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h index ee93a2087fe6..c52295cd05ef 100644 --- a/drivers/net/ethernet/cisco/enic/enic.h +++ b/drivers/net/ethernet/cisco/enic/enic.h @@ -94,7 +94,7 @@ struct enic { u32 rx_coalesce_usecs; u32 tx_coalesce_usecs; #ifdef CONFIG_PCI_IOV - u32 num_vfs; + u16 num_vfs; #endif struct enic_port_profile *pp; diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index ab3f67f980d8..0e4edd3b6bee 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -2370,7 +2370,7 @@ static int __devinit enic_probe(struct pci_dev *pdev, pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); if (pos) { pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF, - (u16 *)&enic->num_vfs); + &enic->num_vfs); if (enic->num_vfs) { err = pci_enable_sriov(pdev, enic->num_vfs); if (err) { -- cgit v1.2.1 From efead8710aad9e384730ecf25eae0287878840d7 Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Tue, 28 Feb 2012 22:17:38 +0000 Subject: vmxnet3: Fix transport header size Fix transport header size Fix the transpoert header size for UDP packets. Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 7 +------ drivers/net/vmxnet3/vmxnet3_int.h | 4 ++-- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 3dcd3857a36c..756c0f5565a5 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -830,13 +830,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, ctx->l4_hdr_size = ((struct tcphdr *) skb_transport_header(skb))->doff * 4; else if (iph->protocol == IPPROTO_UDP) - /* - * Use tcp header size so that bytes to - * be copied are more than required by - * the device. - */ ctx->l4_hdr_size = - sizeof(struct tcphdr); + sizeof(struct udphdr); else ctx->l4_hdr_size = 0; } else { diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index ed54797db191..fc46a81ad538 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -70,10 +70,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01011200 +#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v1.2.1 From 7b3cc67d4445995a025a4b55a7dc687b6829b4ca Mon Sep 17 00:00:00 2001 From: Steffen Maier Date: Fri, 2 Mar 2012 17:32:58 +0100 Subject: [S390] qdio: fix handler function arguments for zfcp data router Git commit 25f269f17316549e "[S390] qdio: EQBS retry after CCQ 96" introduced a regression in regard to the zfcp data router. Revoke the incorrect simplification of the function call arguments for the qdio handler to make the zfcp hardware data router working again. This is applicable to 3.2+ kernels. Signed-off-by: Steffen Maier Reviewed-by: Jan Glauber Cc: Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 3ef8d071c64a..770a740a393c 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -167,7 +167,7 @@ again: DBF_ERROR("%4x EQBS ERROR", SCH_NO(q)); DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION, - 0, -1, -1, q->irq_ptr->int_parm); + q->nr, q->first_to_kick, count, q->irq_ptr->int_parm); return 0; } @@ -215,7 +215,7 @@ again: DBF_ERROR("%4x SQBS ERROR", SCH_NO(q)); DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION, - 0, -1, -1, q->irq_ptr->int_parm); + q->nr, q->first_to_kick, count, q->irq_ptr->int_parm); return 0; } -- cgit v1.2.1 From ef8781989a1bcd05aa47e853917c37df44917194 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 9 Feb 2012 16:33:53 +0100 Subject: mmc: atmel-mci: don't use dma features when using DMA with no chan available Some callbacks are set too early -- i.e. we can have dma capabilities but we can't get a dma channel. So wait to get the dma channel before setting callbacks and change logs consequently. Signed-off-by: Ludovic Desroches Signed-off-by: Nicolas Ferre [Should be applied to 3.2-stable.] Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6985cdb0bb26..e4449a54ae8f 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1948,12 +1948,12 @@ static bool atmci_filter(struct dma_chan *chan, void *slave) } } -static void atmci_configure_dma(struct atmel_mci *host) +static bool atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; if (host == NULL) - return; + return false; pdata = host->pdev->dev.platform_data; @@ -1970,12 +1970,15 @@ static void atmci_configure_dma(struct atmel_mci *host) host->dma.chan = dma_request_channel(mask, atmci_filter, pdata->dma_slave); } - if (!host->dma.chan) - dev_notice(&host->pdev->dev, "DMA not available, using PIO\n"); - else + if (!host->dma.chan) { + dev_warn(&host->pdev->dev, "no DMA channel available\n"); + return false; + } else { dev_info(&host->pdev->dev, "Using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); + return true; + } } static inline unsigned int atmci_get_version(struct atmel_mci *host) @@ -2085,8 +2088,7 @@ static int __init atmci_probe(struct platform_device *pdev) /* Get MCI capabilities and set operations according to it */ atmci_get_cap(host); - if (host->caps.has_dma) { - dev_info(&pdev->dev, "using DMA\n"); + if (host->caps.has_dma && atmci_configure_dma(host)) { host->prepare_data = &atmci_prepare_data_dma; host->submit_data = &atmci_submit_data_dma; host->stop_transfer = &atmci_stop_transfer_dma; @@ -2096,15 +2098,12 @@ static int __init atmci_probe(struct platform_device *pdev) host->submit_data = &atmci_submit_data_pdc; host->stop_transfer = &atmci_stop_transfer_pdc; } else { - dev_info(&pdev->dev, "no DMA, no PDC\n"); + dev_info(&pdev->dev, "using PIO\n"); host->prepare_data = &atmci_prepare_data; host->submit_data = &atmci_submit_data; host->stop_transfer = &atmci_stop_transfer; } - if (host->caps.has_dma) - atmci_configure_dma(host); - platform_set_drvdata(pdev, host); /* We need at least one slot to succeed */ -- cgit v1.2.1 From e39d40c65dfd8390b50c03482ae9e289b8a8f351 Mon Sep 17 00:00:00 2001 From: Gusakov Andrey Date: Sat, 3 Mar 2012 07:32:36 +0900 Subject: ARM: S3C24XX: DMA resume regression fix s3c2410_dma_suspend suspends channels from 0 to dma_channels. s3c2410_dma_resume resumes channels in reverse order. So pointer should be decremented instead of being incremented. Signed-off-by: Gusakov Andrey Reviewed-by: Heiko Stuebner Cc: stable Signed-off-by: Kukjin Kim --- arch/arm/plat-s3c24xx/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 9fe35348e03b..2bab4c99a234 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void) struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; int channel; - for (channel = dma_channels - 1; channel >= 0; cp++, channel--) + for (channel = dma_channels - 1; channel >= 0; cp--, channel--) s3c2410_dma_resume_chan(cp); } -- cgit v1.2.1 From 3f2010b2ad3d66d5291497c9b274315e7b807ecd Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 2 Mar 2012 13:38:56 +0000 Subject: packetengines: fix config default As part of the big network driver reorg, each vendor directory defaults to yes, so that older config's can migrate correctly. Looks like this one got missed. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/packetengines/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig index b97132d9dff0..8f29feb35548 100644 --- a/drivers/net/ethernet/packetengines/Kconfig +++ b/drivers/net/ethernet/packetengines/Kconfig @@ -4,6 +4,7 @@ config NET_PACKET_ENGINE bool "Packet Engine devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y -- cgit v1.2.1 From 71919403dc86b40fafd9400738668f96679c551b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Mar 2012 16:08:54 -0800 Subject: Revert "powerpc/usb: fix issue of CPU halt when missing USB PHY clock" This reverts commit 529febeee680dc22416fca033151a5e8bc620447. To quote Dirk: This commit introduces a check for the USB PHY clock. Problem is that CTRL_PHY_CLK_VALID bit seems not to be present on all Freescale ehci implementations, at least P1022 does not have it. So this check always fails and the driver never gets loaded. So we need to revert this patch. Reported-by: Dirk Eibach Cc: Shengzhou Liu Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 11 ++--------- drivers/usb/host/ehci-fsl.h | 1 - 2 files changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index c26a82e83f6e..b556a72264d1 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -239,7 +239,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); } -static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) +static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) { struct usb_hcd *hcd = ehci_to_hcd(ehci); struct fsl_usb2_platform_data *pdata; @@ -299,19 +299,12 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) #endif out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); } - - if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) { - printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); - return -ENODEV; - } - return 0; } /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { - if (ehci_fsl_usb_setup(ehci)) - return -ENODEV; + ehci_fsl_usb_setup(ehci); ehci_port_power(ehci, 0); return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index bdf43e2adc51..491806221165 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -45,6 +45,5 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ -#define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ -- cgit v1.2.1 From 9c5028e9da1255dd2b99762d8627b88b29f68cce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Fri, 2 Mar 2012 04:43:14 +0000 Subject: r8169: corrupted IP fragments fix for large mtu. Noticed with the 8168d (-vb-gr, aka RTL_GIGA_MAC_VER_26). ConfigX registers should only be written while the Config9346 lock is held. Signed-off-by: Francois Romieu Reported-by: Nick Bowler Cc: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a0c800b50ad..1adf17757cea 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3781,12 +3781,20 @@ static void rtl8169_init_ring_indexes(struct rtl8169_private *tp) static void rtl_hw_jumbo_enable(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + + RTL_W8(Cfg9346, Cfg9346_Unlock); rtl_generic_op(tp, tp->jumbo_ops.enable); + RTL_W8(Cfg9346, Cfg9346_Lock); } static void rtl_hw_jumbo_disable(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + + RTL_W8(Cfg9346, Cfg9346_Unlock); rtl_generic_op(tp, tp->jumbo_ops.disable); + RTL_W8(Cfg9346, Cfg9346_Lock); } static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp) -- cgit v1.2.1 From d3b010640e5c59b98d3b11229ba4cc2838dc7cbf Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 3 Mar 2012 07:41:15 -0500 Subject: btrfs: fix locking issues in find_parent_nodes() - We might unlock head->mutex while it was not locked - We might leave the function without unlocking delayed_refs->lock Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/backref.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 98f6bf10bbd4..0436c12da8c2 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -583,7 +583,7 @@ static int find_parent_nodes(struct btrfs_trans_handle *trans, struct btrfs_path *path; struct btrfs_key info_key = { 0 }; struct btrfs_delayed_ref_root *delayed_refs = NULL; - struct btrfs_delayed_ref_head *head = NULL; + struct btrfs_delayed_ref_head *head; int info_level = 0; int ret; struct list_head prefs_delayed; @@ -607,6 +607,8 @@ static int find_parent_nodes(struct btrfs_trans_handle *trans, * at a specified point in time */ again: + head = NULL; + ret = btrfs_search_slot(trans, fs_info->extent_root, &key, path, 0, 0); if (ret < 0) goto out; @@ -635,8 +637,10 @@ again: goto again; } ret = __add_delayed_refs(head, seq, &info_key, &prefs_delayed); - if (ret) + if (ret) { + spin_unlock(&delayed_refs->lock); goto out; + } } spin_unlock(&delayed_refs->lock); -- cgit v1.2.1 From a175423c831ea582c06784d1e172d2ce1d79923a Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 28 Feb 2012 12:42:44 -0500 Subject: Btrfs: fix casting error in scrub reada code The reada code from scrub was casting down a u64 to an unsigned long so it could insert it into a radix tree. What it really wanted to do was cast down the result of a shift, instead of casting down the u64. The bug resulted in trying to insert our reada struct into the wrong place, which caused soft lockups and other problems. Signed-off-by: Chris Mason --- fs/btrfs/reada.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c index 2373b39a132b..22db04550f6a 100644 --- a/fs/btrfs/reada.c +++ b/fs/btrfs/reada.c @@ -305,7 +305,7 @@ again: spin_lock(&fs_info->reada_lock); ret = radix_tree_insert(&dev->reada_zones, - (unsigned long)zone->end >> PAGE_CACHE_SHIFT, + (unsigned long)(zone->end >> PAGE_CACHE_SHIFT), zone); spin_unlock(&fs_info->reada_lock); -- cgit v1.2.1 From 6e557a6adfdbb511dbfa7a0a4aa2148f76a01c6d Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 6 Feb 2012 15:27:52 -0700 Subject: perf record: No build id option fails A recent refactoring of perf-record introduced the following: perf record -a -B Couldn't generating buildids. Use --no-buildid to profile anyway. sleep: Terminated I believe the triple negative was meant to be only a double negative. :-) While I'm there, fixed the grammar on the error message. Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Robert Richter Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 0abfb18b911f..39b6a4067f88 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -503,9 +503,9 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv) return err; } - if (!!rec->no_buildid + if (!rec->no_buildid && !perf_header__has_feat(&session->header, HEADER_BUILD_ID)) { - pr_err("Couldn't generating buildids. " + pr_err("Couldn't generate buildids. " "Use --no-buildid to profile anyway.\n"); return -1; } -- cgit v1.2.1 From 8f54ed4a2d8cf001456d3779bdb33985a050bf03 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 10 Feb 2012 18:05:05 +0100 Subject: perf tools: Change perf_guest default back to false Setting perf_guest to true by default makes no sense because the perf subcommands can not setup guest symbol information and thus not process and guest samples. The only exception is perf-kvm which changes the perf_guest value on its own. So change the default for perf_guest back to false. Cc: David Ahern Cc: Ingo Molnar Cc: Jason Wang Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1328893505-4115-3-git-send-email-joerg.roedel@amd.com Signed-off-by: Joerg Roedel Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c index 813141047fc2..fb25d1329218 100644 --- a/tools/perf/util/util.c +++ b/tools/perf/util/util.c @@ -6,7 +6,7 @@ * XXX We need to find a better place for these things... */ bool perf_host = true; -bool perf_guest = true; +bool perf_guest = false; void event_attr_init(struct perf_event_attr *attr) { -- cgit v1.2.1 From bc76efe64533305b55d1f0834fd03414da8a12b2 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 14 Feb 2012 14:05:30 -0200 Subject: perf tools: Handle kernels that don't support attr.exclude_{guest,host} Just fall back to resetting those fields, if set, warning the user that that feature is not available. If guest samples appear they will just be discarded because no struct machine will be found and thus the event will be accounted as not handled and dropped, see 0c09571. Reported-by: Namhyung Kim Tested-by: Joerg Roedel Cc: David Ahern Cc: Frederic Weisbecker Cc: Joerg Roedel Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-vuwxig36mzprl5n7nzvnxxsh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 29 ++++++++++++++++++++--------- tools/perf/builtin-top.c | 23 +++++++++++++++++------ tools/perf/perf.h | 1 + tools/perf/util/top.h | 1 + 4 files changed, 39 insertions(+), 15 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 39b6a4067f88..227b6ae99785 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -204,6 +204,9 @@ static void perf_record__open(struct perf_record *rec) if (opts->group && pos != first) group_fd = first->fd; +fallback_missing_features: + if (opts->exclude_guest_missing) + attr->exclude_guest = attr->exclude_host = 0; retry_sample_id: attr->sample_id_all = opts->sample_id_all_avail ? 1 : 0; try_again: @@ -217,15 +220,23 @@ try_again: } else if (err == ENODEV && opts->cpu_list) { die("No such device - did you specify" " an out-of-range profile CPU?\n"); - } else if (err == EINVAL && opts->sample_id_all_avail) { - /* - * Old kernel, no attr->sample_id_type_all field - */ - opts->sample_id_all_avail = false; - if (!opts->sample_time && !opts->raw_samples && !time_needed) - attr->sample_type &= ~PERF_SAMPLE_TIME; - - goto retry_sample_id; + } else if (err == EINVAL) { + if (!opts->exclude_guest_missing && + (attr->exclude_guest || attr->exclude_host)) { + pr_debug("Old kernel, cannot exclude " + "guest or host samples.\n"); + opts->exclude_guest_missing = true; + goto fallback_missing_features; + } else if (opts->sample_id_all_avail) { + /* + * Old kernel, no attr->sample_id_type_all field + */ + opts->sample_id_all_avail = false; + if (!opts->sample_time && !opts->raw_samples && !time_needed) + attr->sample_type &= ~PERF_SAMPLE_TIME; + + goto retry_sample_id; + } } /* diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index dd162aa24baa..ecff31257eb3 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -857,6 +857,9 @@ static void perf_top__start_counters(struct perf_top *top) attr->mmap = 1; attr->comm = 1; attr->inherit = top->inherit; +fallback_missing_features: + if (top->exclude_guest_missing) + attr->exclude_guest = attr->exclude_host = 0; retry_sample_id: attr->sample_id_all = top->sample_id_all_avail ? 1 : 0; try_again: @@ -868,12 +871,20 @@ try_again: if (err == EPERM || err == EACCES) { ui__error_paranoid(); goto out_err; - } else if (err == EINVAL && top->sample_id_all_avail) { - /* - * Old kernel, no attr->sample_id_type_all field - */ - top->sample_id_all_avail = false; - goto retry_sample_id; + } else if (err == EINVAL) { + if (!top->exclude_guest_missing && + (attr->exclude_guest || attr->exclude_host)) { + pr_debug("Old kernel, cannot exclude " + "guest or host samples.\n"); + top->exclude_guest_missing = true; + goto fallback_missing_features; + } else if (top->sample_id_all_avail) { + /* + * Old kernel, no attr->sample_id_type_all field + */ + top->sample_id_all_avail = false; + goto retry_sample_id; + } } /* * If it's cycles then fall back to hrtimer diff --git a/tools/perf/perf.h b/tools/perf/perf.h index 64f8bee31ced..16e7d20eee83 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -199,6 +199,7 @@ struct perf_record_opts { bool sample_address; bool sample_time; bool sample_id_all_avail; + bool exclude_guest_missing; bool system_wide; bool period; unsigned int freq; diff --git a/tools/perf/util/top.h b/tools/perf/util/top.h index a248f3c2c60d..f2eab81435ae 100644 --- a/tools/perf/util/top.h +++ b/tools/perf/util/top.h @@ -34,6 +34,7 @@ struct perf_top { bool inherit; bool group; bool sample_id_all_avail; + bool exclude_guest_missing; bool dump_symtab; const char *cpu_list; struct hist_entry *sym_filter_entry; -- cgit v1.2.1 From c0638c247f559e1a16ee79e54df14bca2cb679ea Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Fri, 2 Mar 2012 21:36:51 +0000 Subject: tcp: don't fragment SACKed skbs in tcp_mark_head_lost() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In tcp_mark_head_lost() we should not attempt to fragment a SACKed skb to mark the first portion as lost. This is for two primary reasons: (1) tcp_shifted_skb() coalesces adjacent regions of SACKed skbs. When doing this, it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. But given that skbs can have remainders that do not align to MSS boundaries, this packet count preservation means that for SACKed skbs there is not necessarily a direct linear relationship between tcp_skb_pcount(skb) and skb->len. Thus tcp_mark_head_lost()'s previous attempts to fragment off and mark as lost a prefix of length (packets - oldcnt)*mss from SACKed skbs were leading to occasional failures of the WARN_ON(len > skb->len) in tcp_fragment() (which used to be a BUG_ON(); see the recent "crash in tcp_fragment" thread on netdev). (2) there is no real point in fragmenting off part of a SACKed skb and calling tcp_skb_mark_lost() on it, since tcp_skb_mark_lost() is a NOP for SACKed skbs. Signed-off-by: Neal Cardwell Acked-by: Ilpo Järvinen Acked-by: Yuchung Cheng Acked-by: Nandita Dukkipati Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index ee42d42b2f45..d9b83d198c3d 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2569,6 +2569,7 @@ static void tcp_mark_head_lost(struct sock *sk, int packets, int mark_head) if (cnt > packets) { if ((tcp_is_sack(tp) && !tcp_is_fack(tp)) || + (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED) || (oldcnt >= packets)) break; -- cgit v1.2.1 From b2ccf065f7b23147ed135a41b01d05a332ca6b7e Mon Sep 17 00:00:00 2001 From: Denis 'GNUtoo' Carikli Date: Sun, 26 Feb 2012 19:21:54 +0100 Subject: ASoC: neo1973: fix neo1973 wm8753 initialization The neo1973 driver had wrong codec name which prevented the "sound card" from appearing. Signed-off-by: Denis 'GNUtoo' Carikli Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/samsung/neo1973_wm8753.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c index c6012ff5bd3e..d23b19a59d83 100644 --- a/sound/soc/samsung/neo1973_wm8753.c +++ b/sound/soc/samsung/neo1973_wm8753.c @@ -367,7 +367,7 @@ static struct snd_soc_dai_link neo1973_dai[] = { .platform_name = "samsung-audio", .cpu_dai_name = "s3c24xx-iis", .codec_dai_name = "wm8753-hifi", - .codec_name = "wm8753-codec.0-001a", + .codec_name = "wm8753.0-001a", .init = neo1973_wm8753_init, .ops = &neo1973_hifi_ops, }, @@ -376,7 +376,7 @@ static struct snd_soc_dai_link neo1973_dai[] = { .stream_name = "Voice", .cpu_dai_name = "dfbmcs320-pcm", .codec_dai_name = "wm8753-voice", - .codec_name = "wm8753-codec.0-001a", + .codec_name = "wm8753.0-001a", .ops = &neo1973_voice_ops, }, }; -- cgit v1.2.1 From 24e1511f675b97a76488b89017a40909be731b63 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 17 Feb 2012 15:40:18 +0100 Subject: MAINTAINERS: hand over atmel-mci (sd/mmc interface) Modify MAINTAINERS entry for Atmel SD/MMC drivers. I hand the atmel-mci and at91_mci drivers over to Ludovic. Signed-off-by: Nicolas Ferre Acked-by: Ludovic Desroches Signed-off-by: Chris Ball --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4e41d5255d72..b087b3bca290 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1310,7 +1310,7 @@ F: drivers/atm/ F: include/linux/atm* ATMEL AT91 MCI DRIVER -M: Nicolas Ferre +M: Ludovic Desroches L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.atmel.com/products/AT91/ W: http://www.at91.com/ @@ -1318,7 +1318,7 @@ S: Maintained F: drivers/mmc/host/at91_mci.c ATMEL AT91 / AT32 MCI DRIVER -M: Nicolas Ferre +M: Ludovic Desroches S: Maintained F: drivers/mmc/host/atmel-mci.c F: drivers/mmc/host/atmel-mci-regs.h -- cgit v1.2.1 From c84f15aed29d89995fd50ef37e19c7b88019d78f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 23 Feb 2012 11:22:29 +0100 Subject: mmc: core: fix regression: set default clock gating delay to 0 A recent commit "mmc: core: Use delayed work in clock gating framework" (597dd9d79cfbbb1) introduced a default 200ms delay before clock gating actually takes place. This means that every time an MMC interface becomes idle it first stays on for 200ms before gating its clock. This leads to increased power consumption and is therefore a clear regression. This patch restores the original behaviour by setting the default delay to 0. Users prioritising throughput over power efficiency can still modify the delay via sysfs. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/core/host.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 30055f2b0d44..c3704e293a7b 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -238,10 +238,10 @@ static inline void mmc_host_clk_init(struct mmc_host *host) /* Hold MCI clock for 8 cycles by default */ host->clk_delay = 8; /* - * Default clock gating delay is 200ms. + * Default clock gating delay is 0ms to avoid wasting power. * This value can be tuned by writing into sysfs entry. */ - host->clkgate_delay = 200; + host->clkgate_delay = 0; host->clk_gated = false; INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); spin_lock_init(&host->clk_lock); -- cgit v1.2.1 From 5b6b0ad6e572b32a641116aaa5f897ffebe31e44 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 17 Feb 2012 11:51:49 +0100 Subject: mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5 On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d601e41af282..0be4e2013632 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) imx_data->scratchpad = val; return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) - && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || + host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) val |= SDHCI_CMD_ABORTCMD; if (is_imx6q_usdhc(imx_data)) { -- cgit v1.2.1 From 8f7f6b7e46117edb83d12a508fffa0f013457677 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Feb 2012 11:25:21 +0000 Subject: mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size On a system with large pages (64k in my case), the following BUG is triggered in MMC core: [ 2.338023] BUG: failure at drivers/mmc/core/core.c:221/mmc_start_request()! [ 2.338102] Kernel panic - not syncing: BUG! [ 2.338155] Call trace: [ 2.338228] [] dump_backtrace+0x0/0x120 [ 2.338317] [] dump_stack+0x14/0x1c [ 2.338403] [] panic+0xbc/0x1f0 [ 2.338498] [] mmc_start_request+0x154/0x184 [ 2.338600] [] mmc_start_req+0x110/0x140 [ 2.338701] [] mmc_blk_issue_rw_rq+0x7c/0x39c [ 2.338804] [] mmc_blk_issue_rq+0x1c0/0x468 [ 2.338905] [] mmc_queue_thread+0x68/0x118 [ 2.338995] [] kthread+0x84/0x8c This is because of a 64k request with a max_req_size of 64k-1 bytes. The following patch fixes the problem by limiting the max_blk_count such that max_blk_count * max_blk_size == max_req_size. I couldn't pursuade the compiler to emit a shift instead of a div without encoding the shift explicitly. Signed-off-by: Will Deacon Signed-off-by: Chris Ball --- drivers/mmc/host/mmci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0d955ffaf44e..11e589cd8233 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1271,12 +1271,13 @@ static int __devinit mmci_probe(struct amba_device *dev, /* * Block size can be up to 2048 bytes, but must be a power of two. */ - mmc->max_blk_size = 2048; + mmc->max_blk_size = 1 << 11; /* - * No limit on the number of blocks transferred. + * Limit the number of blocks transferred so that we don't overflow + * the maximum request size. */ - mmc->max_blk_count = mmc->max_req_size; + mmc->max_blk_count = mmc->max_req_size >> 11; spin_lock_init(&host->lock); -- cgit v1.2.1 From e7747475b61fdc2a4a412475a9d64d8c309916e3 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 1 Mar 2012 13:18:05 +0100 Subject: mmc: core: Fixup suspend/resume issues for UHS-I cards Even if cards supports 1.8V I/O voltage those should anyway be initialized at 3.3V I/O according to (e)MMC, SD and SDIO specs. Some eMMC and embedded SDIO devices are able to be initialized at 1.8V as well, but it is better to be safe. Do note that initialization in this context means that the card has been completely powered off, otherwise the card will remain at the last I/O voltage level that were negotitiated. Due to the above being taken care of the suspend/resume issues for UHS-I SD-cards has been fixed. Signed-off-by: Ulf Hansson Acked-by: Philip Rakity Acked-by: Linus Walleij Tested-by: Subhash Jadavani Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 3 +++ drivers/mmc/core/mmc.c | 3 +++ drivers/mmc/core/sd.c | 8 +++----- drivers/mmc/core/sdio.c | 8 ++++++++ 4 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 690255c7d4dc..132378b89d76 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2068,6 +2068,9 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) */ mmc_hw_reset_for_init(host); + /* Initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + /* * sdio_reset sends CMD52 to reset card. Since we do not know * if the card is being re-initialized, just send it. CMD52 diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index a48066344fa8..2b9ed1401dc4 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -816,6 +816,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (!mmc_host_is_spi(host)) mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* Initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 5017f9354ce2..c272c6868ecf 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -911,6 +911,9 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, BUG_ON(!host); WARN_ON(!host->claimed); + /* The initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + err = mmc_sd_get_cid(host, ocr, cid, &rocr); if (err) return err; @@ -1156,11 +1159,6 @@ int mmc_attach_sd(struct mmc_host *host) BUG_ON(!host); WARN_ON(!host->claimed); - /* Make sure we are at 3.3V signalling voltage */ - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false); - if (err) - return err; - /* Disable preset value enable if already set since last time */ if (host->ops->enable_preset_value) { mmc_host_clk_hold(host); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 12cde6ee17f5..2c7c83f832d2 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -585,6 +585,9 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, * Inform the card of the voltage */ if (!powered_resume) { + /* The initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + err = mmc_send_io_op_cond(host, host->ocr, &ocr); if (err) goto err; @@ -996,6 +999,11 @@ static int mmc_sdio_power_restore(struct mmc_host *host) * With these steps taken, mmc_select_voltage() is also required to * restore the correct voltage setting of the card. */ + + /* The initialization should be done at 3.3 V I/O voltage. */ + if (!mmc_card_keep_power(host)) + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + sdio_reset(host); mmc_go_idle(host); mmc_send_if_cond(host, host->ocr_avail); -- cgit v1.2.1 From adb795062f89b8d67d295ee25e04034bccce6779 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Wed, 29 Feb 2012 00:41:12 +0400 Subject: percpu: fix __this_cpu_{sub,inc,dec}_return() definition This patch adds missed "__" prefixes, otherwise these functions works as irq/preemption safe. Reported-by: Torsten Kaiser Signed-off-by: Konstantin Khlebnikov Signed-off-by: Tejun Heo --- include/linux/percpu.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 594c0040fdd8..21638ae14e07 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -722,9 +722,9 @@ do { \ __pcpu_size_call_return2(__this_cpu_add_return_, pcp, val) #endif -#define __this_cpu_sub_return(pcp, val) this_cpu_add_return(pcp, -(val)) -#define __this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1) -#define __this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1) +#define __this_cpu_sub_return(pcp, val) __this_cpu_add_return(pcp, -(val)) +#define __this_cpu_inc_return(pcp) __this_cpu_add_return(pcp, 1) +#define __this_cpu_dec_return(pcp) __this_cpu_add_return(pcp, -1) #define __this_cpu_generic_xchg(pcp, nval) \ ({ typeof(pcp) ret__; \ -- cgit v1.2.1 From 5483f18e986ed5267b923bec12b407845181350b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Mar 2012 15:51:42 -0800 Subject: vfs: move dentry_cmp from to fs/dcache.c It's only used inside fs/dcache.c, and we're going to play games with it for the word-at-a-time patches. This time we really don't even want to export it, because it really is an internal function to fs/dcache.c, and has been since it was introduced. Having it in that extremely hot header file (it's included in pretty much everything, thanks to ) is a disaster for testing different versions, and is utterly pointless. We really should have some kind of header file diet thing, where we figure out which parts of header files are really better off private and only result in more expensive compiles. Signed-off-by: Linus Torvalds --- fs/dcache.c | 20 ++++++++++++++++++++ include/linux/dcache.h | 20 -------------------- 2 files changed, 20 insertions(+), 20 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 138be96e25b6..bcbdb33fcc20 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -137,6 +137,26 @@ int proc_nr_dentry(ctl_table *table, int write, void __user *buffer, } #endif +/* + * Compare 2 name strings, return 0 if they match, otherwise non-zero. + * The strings are both count bytes long, and count is non-zero. + */ +static inline int dentry_cmp(const unsigned char *cs, size_t scount, + const unsigned char *ct, size_t tcount) +{ + if (scount != tcount) + return 1; + + do { + if (*cs != *ct) + return 1; + cs++; + ct++; + tcount--; + } while (tcount); + return 0; +} + static void __d_free(struct rcu_head *head) { struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu); diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 4270bedd2308..ff5f5256d175 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -47,26 +47,6 @@ struct dentry_stat_t { }; extern struct dentry_stat_t dentry_stat; -/* - * Compare 2 name strings, return 0 if they match, otherwise non-zero. - * The strings are both count bytes long, and count is non-zero. - */ -static inline int dentry_cmp(const unsigned char *cs, size_t scount, - const unsigned char *ct, size_t tcount) -{ - if (scount != tcount) - return 1; - - do { - if (*cs != *ct) - return 1; - cs++; - ct++; - tcount--; - } while (tcount); - return 0; -} - /* Name hashing routines. Initial hash value */ /* Hash courtesy of the R5 hash in reiserfs modulo sign bits */ #define init_name_hash() 0 -- cgit v1.2.1 From aaca735f4f188641c4786af8f20ed39fcce3809c Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Thu, 1 Mar 2012 08:12:18 +0000 Subject: bridge: Adjust min age inc for HZ > 256 min age increment needs to round up its min age tick for all HZ values to guarantee message age is increasing. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- net/bridge/br_stp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index dd147d78a588..c9ef3db737d9 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -17,9 +17,9 @@ #include "br_private_stp.h" /* since time values in bpdu are in jiffies and then scaled (1/256) - * before sending, make sure that is at least one. + * before sending, make sure that is at least one STP tick. */ -#define MESSAGE_AGE_INCR ((HZ < 256) ? 1 : (HZ/256)) +#define MESSAGE_AGE_INCR ((HZ / 256) + 1) static const char *const br_port_state_names[] = { [BR_STATE_DISABLED] = "disabled", -- cgit v1.2.1 From 709e1b5cd9e1915ad4f6c470ebf6b55d4a911d8c Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Thu, 1 Mar 2012 08:12:19 +0000 Subject: bridge: message age needs to increase, not decrease. commit bridge: send proper message_age in config BPDU added this gem: bpdu.message_age = (jiffies - root->designated_age) p->designated_age = jiffies + bpdu->message_age; Notice how bpdu->message_age is negated when reassigned to bpdu.message_age. This causes message age to decrease breaking the STP protocol. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- net/bridge/br_stp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index c9ef3db737d9..6751ed4e0c07 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -186,7 +186,7 @@ static void br_record_config_information(struct net_bridge_port *p, p->designated_cost = bpdu->root_path_cost; p->designated_bridge = bpdu->bridge_id; p->designated_port = bpdu->port_id; - p->designated_age = jiffies + bpdu->message_age; + p->designated_age = jiffies - bpdu->message_age; mod_timer(&p->message_age_timer, jiffies + (p->br->max_age - bpdu->message_age)); -- cgit v1.2.1 From a4b64fbe482c7766f7925f03067fc637716bfa3f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 4 Mar 2012 12:32:10 +0000 Subject: rtnetlink: fix rtnl_calcit() and rtnl_dump_ifinfo() nlmsg_parse() might return an error, so test its return value before potential random memory accesses. Errors introduced in commit 115c9b81928 (rtnetlink: Fix problem with buffer allocation) Signed-off-by: Eric Dumazet Cc: Greg Rose Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 606a6e8f3671..f965dce6f20f 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1060,11 +1060,12 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); cb->seq = net->dev_base_seq; - nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, - ifla_policy); + if (nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, + ifla_policy) >= 0) { - if (tb[IFLA_EXT_MASK]) - ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); + if (tb[IFLA_EXT_MASK]) + ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); + } for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) { idx = 0; @@ -1900,10 +1901,11 @@ static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh) u32 ext_filter_mask = 0; u16 min_ifinfo_dump_size = 0; - nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, ifla_policy); - - if (tb[IFLA_EXT_MASK]) - ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); + if (nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, + ifla_policy) >= 0) { + if (tb[IFLA_EXT_MASK]) + ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); + } if (!ext_filter_mask) return NLMSG_GOODSIZE; -- cgit v1.2.1 From 883e0e366209067e690356e58e19bb2e6693b839 Mon Sep 17 00:00:00 2001 From: Nikolai Kondrashov Date: Fri, 2 Mar 2012 22:13:58 +0200 Subject: HID: hid-input: allow array fields out of range Allow array field values out of range as per HID 1.11 specification, section 6.2.25: Rather than returning a single bit for each button in the group, an array returns an index in each field that corresponds to the pressed button (like keyboard scan codes). An out-of range value in and array field is considered no controls asserted. Apparently, "and" above is a typo and should be "an". This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never released. The relevant part of Waltop tablet report descriptors is this: 0x09, 0x42, /* Usage (Tip Switch), */ 0x09, 0x44, /* Usage (Barrel Switch), */ 0x09, 0x46, /* Usage (Tablet Pick), */ 0x15, 0x01, /* Logical Minimum (1), */ 0x25, 0x03, /* Logical Maximum (3), */ 0x75, 0x04, /* Report Size (4), */ 0x95, 0x01, /* Report Count (1), */ 0x80, /* Input, */ This is a regression fix for commit b4b583d ("HID: be more strict when ignoring out-of-range fields"). Signed-off-by: Nikolai Kondrashov Signed-off-by: Jiri Kosina --- drivers/hid/hid-input.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 9333d692a786..627850a54d34 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -986,8 +986,13 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct return; } - /* Ignore out-of-range values as per HID specification, section 5.10 */ - if (value < field->logical_minimum || value > field->logical_maximum) { + /* + * Ignore out-of-range values as per HID specification, + * section 5.10 and 6.2.25 + */ + if ((field->flags & HID_MAIN_ITEM_VARIABLE) && + (value < field->logical_minimum || + value > field->logical_maximum)) { dbg_hid("Ignoring out-of-range value %x\n", value); return; } -- cgit v1.2.1 From 4adf9beda58364497889c06c1badf129a71d48be Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 2 Mar 2012 18:07:21 +0800 Subject: regulator: Fix mask parameter in da9052_reg_update calls If the mask parameter is 0, info->activate_bit bit won't be set by calling da9052_reg_update. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/da9052-regulator.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 3767364452fd..ea4d8f575ac6 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -260,8 +260,8 @@ static int da9052_set_ldo5_6_voltage(struct regulator_dev *rdev, * the LDO activate bit to implment the changes on the * LDO output. */ - return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, - info->activate_bit); + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, + info->activate_bit, info->activate_bit); } static int da9052_set_dcdc_voltage(struct regulator_dev *rdev, @@ -280,8 +280,8 @@ static int da9052_set_dcdc_voltage(struct regulator_dev *rdev, * the DCDC activate bit to implment the changes on the * DCDC output. */ - return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, - info->activate_bit); + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, + info->activate_bit, info->activate_bit); } static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev) -- cgit v1.2.1 From 134d12fae0bb8f3d60dc7440a9e1950bb5427167 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Sun, 4 Mar 2012 12:01:11 +0200 Subject: ARM: OMAP: fix iommu, not mailbox For some weird (freudian?) reason, commit 435792d "ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp" unintentionally changed the mailbox's initcall instead of the iommu's. Fix that. Reported-by: Fernando Guzman Lugo Signed-off-by: Ohad Ben-Cohen Cc: Laurent Pinchart Cc: Joerg Roedel Cc: Tony Lindgren Signed-off-by: Joerg Roedel --- arch/arm/mach-omap2/mailbox.c | 3 +-- arch/arm/mach-omap2/omap-iommu.c | 3 ++- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index a6db1e4f7b6e..609ea2ded7e3 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -412,8 +412,7 @@ static void __exit omap2_mbox_exit(void) platform_driver_unregister(&omap2_mbox_driver); } -/* must be ready before omap3isp is probed */ -subsys_initcall(omap2_mbox_init); +module_init(omap2_mbox_init); module_exit(omap2_mbox_exit); MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index b8822048e409..ac49384d0285 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -150,7 +150,8 @@ err_out: platform_device_put(omap_iommu_pdev[i]); return err; } -module_init(omap_iommu_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { -- cgit v1.2.1 From 182ada1c712a4ebe14d6a023cfab3559b2527d69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 4 Mar 2012 08:31:35 -0800 Subject: iwlwifi: fix wowlan suspend This was broken by the commit 023ca58f1 "iwlwifi: Move the core suspend function to iwl-agn-lib" where for some reason the code changed while moving, from .len[0] = sizeof(*key_data.rsc_tsc), to .len[0] = sizeof(key_data.rsc_tsc), Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index 64cf439035c3..ca78e91de86c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -1240,7 +1240,7 @@ int iwlagn_suspend(struct iwl_priv *priv, .flags = CMD_SYNC, .data[0] = key_data.rsc_tsc, .dataflags[0] = IWL_HCMD_DFL_NOCOPY, - .len[0] = sizeof(key_data.rsc_tsc), + .len[0] = sizeof(*key_data.rsc_tsc), }; ret = iwl_trans_send_cmd(trans(priv), &rsc_tsc_cmd); -- cgit v1.2.1 From d1d81d4c3dd886d5fa25a2c4fa1e39cb89613712 Mon Sep 17 00:00:00 2001 From: Ulrich Weber Date: Mon, 5 Mar 2012 04:52:44 +0000 Subject: bridge: check return value of ipv6_dev_get_saddr() otherwise source IPv6 address of ICMPV6_MGM_QUERY packet might be random junk if IPv6 is disabled on interface or link-local address is not yet ready (DAD). Signed-off-by: Ulrich Weber Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 568d5bf17534..702a1ae9220b 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -446,8 +446,11 @@ static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br, ip6h->nexthdr = IPPROTO_HOPOPTS; ip6h->hop_limit = 1; ipv6_addr_set(&ip6h->daddr, htonl(0xff020000), 0, 0, htonl(1)); - ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0, - &ip6h->saddr); + if (ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0, + &ip6h->saddr)) { + kfree_skb(skb); + return NULL; + } ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest); hopopt = (u8 *)(ip6h + 1); -- cgit v1.2.1 From 9d1dfc06b14df0818d86d6ba6aaec0f641e94990 Mon Sep 17 00:00:00 2001 From: Santosh Nayak Date: Fri, 2 Mar 2012 05:09:05 +0000 Subject: qla3xxx: ethernet: Fix bogus interrupt state flag. In 'ql_adapter_initialize' the first call for 'spin_unlock_irqrestore()' is with hw_flags = 0, which is as good as 'spin_unlock_irq()' (unconditional interrupt enabling). If this is intended, then for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq() Signed-off-by: Santosh Nayak Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qla3xxx.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index 7931531c3a40..e61560e16385 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -3017,7 +3017,6 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) (void __iomem *)port_regs; u32 delay = 10; int status = 0; - unsigned long hw_flags = 0; if (ql_mii_setup(qdev)) return -1; @@ -3228,9 +3227,9 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) value = ql_read_page0_reg(qdev, &port_regs->portStatus); if (value & PORT_STATUS_IC) break; - spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + spin_unlock_irq(&qdev->hw_lock); msleep(500); - spin_lock_irqsave(&qdev->hw_lock, hw_flags); + spin_lock_irq(&qdev->hw_lock); } while (--delay); if (delay == 0) { -- cgit v1.2.1 From 6414fa6a150111750011f477899d370244da4171 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 5 Mar 2012 06:38:42 +0000 Subject: aout: move setup_arg_pages() prior to reading/mapping the binary Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/ia32/ia32_aout.c | 14 +++++++------- fs/binfmt_aout.c | 14 +++++++------- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index fd843877e841..39e49091f648 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) current->mm->free_area_cache = TASK_UNMAPPED_BASE; current->mm->cached_hole_size = 0; + retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT); + if (retval < 0) { + /* Someone check-me: is this error path enough? */ + send_sig(SIGKILL, current, 0); + return retval; + } + install_exec_creds(bprm); current->flags &= ~PF_FORKNOEXEC; @@ -410,13 +417,6 @@ beyond_if: set_brk(current->mm->start_brk, current->mm->brk); - retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT); - if (retval < 0) { - /* Someone check-me: is this error path enough? */ - send_sig(SIGKILL, current, 0); - return retval; - } - current->mm->start_stack = (unsigned long)create_aout_tables((char __user *)bprm->p, bprm); /* start thread */ diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c index a6395bdb26ae..1ff94054d35a 100644 --- a/fs/binfmt_aout.c +++ b/fs/binfmt_aout.c @@ -259,6 +259,13 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) current->mm->free_area_cache = current->mm->mmap_base; current->mm->cached_hole_size = 0; + retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT); + if (retval < 0) { + /* Someone check-me: is this error path enough? */ + send_sig(SIGKILL, current, 0); + return retval; + } + install_exec_creds(bprm); current->flags &= ~PF_FORKNOEXEC; @@ -352,13 +359,6 @@ beyond_if: return retval; } - retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT); - if (retval < 0) { - /* Someone check-me: is this error path enough? */ - send_sig(SIGKILL, current, 0); - return retval; - } - current->mm->start_stack = (unsigned long) create_aout_tables((char __user *) bprm->p, bprm); #ifdef __alpha__ -- cgit v1.2.1 From 835ee7978cb47de94cf70232a694f19295d2993f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 5 Mar 2012 06:39:47 +0000 Subject: VM_GROWS{UP,DOWN} shouldn't be set on shmem VMAs Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- mm/mmap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/mmap.c b/mm/mmap.c index 3f758c7f4c81..22e1a0b2f70c 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1293,6 +1293,8 @@ munmap_back: pgoff = vma->vm_pgoff; vm_flags = vma->vm_flags; } else if (vm_flags & VM_SHARED) { + if (unlikely(vm_flags & (VM_GROWSDOWN|VM_GROWSUP))) + goto free_vma; error = shmem_zero_setup(vma); if (error) goto free_vma; -- cgit v1.2.1 From cd2934a3b3057eb048f8b4fb82e941d24a043207 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 5 Mar 2012 06:40:29 +0000 Subject: flush_tlb_range() needs ->page_table_lock when ->mmap_sem is not held All other callers already hold either ->mmap_sem (exclusive) or ->page_table_lock. And we need it because some page table flushing instanced do work explicitly with ge tables. See e.g. arch/powerpc/mm/tlb_hash32.c, flush_tlb_range() and flush_range() in there. The same goes for uml, with a lot more extensive playing with page tables. Almost all callers are actually fine - flush_tlb_range() may have no need to bother playing with page tables, but it can do so safely; again, this caller is the sole exception - everything else either has exclusive ->mmap_sem on the mm in question, or mm->page_table_lock is held. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 5f34bd8dda34..a876871f6be5 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2277,8 +2277,8 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start, set_page_dirty(page); list_add(&page->lru, &page_list); } - spin_unlock(&mm->page_table_lock); flush_tlb_range(vma, start, end); + spin_unlock(&mm->page_table_lock); mmu_notifier_invalidate_range_end(mm, start, end); list_for_each_entry_safe(page, tmp, &page_list, lru) { page_remove_rmap(page); -- cgit v1.2.1 From cc4ad9072cce2bf0eeae1fb197e42612fbac1f15 Mon Sep 17 00:00:00 2001 From: R Sricharan Date: Fri, 2 Mar 2012 16:31:18 +0530 Subject: ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 While building modules with randconfig the below errors are observed. ERROR: "omap_bus_sync" [drivers/watchdog/sp805_wdt.ko] undefined! ERROR: "omap_bus_sync" [drivers/watchdog/dw_wdt.ko] undefined! ERROR: "omap_bus_sync" [drivers/virtio/virtio_ring.ko] undefined! ERROR: "omap_bus_sync" [drivers/video/sm501fb.ko] undefined! ERROR: "omap_bus_sync" [drivers/usb/mon/usbmon.ko] undefined! ERROR: "omap_bus_sync" [drivers/usb/host/sl811-hcd.ko] undefined! ERROR: "omap_bus_sync" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "omap_bus_sync" [drivers/usb/host/isp1760.ko] undefined! ERROR: "omap_bus_sync" [drivers/usb/host/isp1362-hcd.ko] undefined! ERROR: "omap_bus_sync" [drivers/usb/host/isp116x-hcd.ko] undefined! ERROR: "omap_bus_sync" [drivers/usb/core/usbcore.ko] undefined! ERROR: "omap_bus_sync" [drivers/tty/serial/altera_uart.ko] undefined! ERROR: "omap_bus_sync" [drivers/tty/serial/altera_jtaguart.ko] undefined! ERROR: "omap_bus_sync" [drivers/tty/serial/8250/8250_dw.ko] undefined! ERROR: "omap_bus_sync" [drivers/ssb/ssb.ko] undefined! ERROR: "omap_bus_sync" [drivers/rtc/rtc-cmos.ko] undefined! ERROR: "omap_bus_sync" [drivers/rtc/rtc-bq4802.ko] undefined! ERROR: "omap_bus_sync" [drivers/mtd/nand/tmio_nand.ko] undefined! ERROR: "omap_bus_sync" [drivers/mtd/nand/omap2.ko] undefined! Signed-off-by: R Sricharan Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap4-common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index ebc595091312..70de277f5c15 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -31,6 +31,7 @@ #include "common.h" #include "omap4-sar-layout.h" +#include #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; @@ -55,6 +56,7 @@ void omap_bus_sync(void) isb(); } } +EXPORT_SYMBOL(omap_bus_sync); /* Steal one page physical memory for barrier implementation */ int __init omap_barrier_reserve_memblock(void) -- cgit v1.2.1 From 055bf38d3d6069707e2d555cffdde629b8404ff2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 5 Mar 2012 14:22:16 +0000 Subject: drm, gma500: Fix Cedarview boot failures in 3.3-rc Production GMA3600/3650 hardware turns out to be subtly different to the development platforms. This combined with a minor driver bug is causing the kernel to hang on these platforms. This patch does the following - turn down a couple of messages that were meant to be debug and are causing much confusion - ensure the hotplug interrupt is disabled on Cedartrail systems. - fix a bug where gtt roll mode called psbfb_sync, which tries to sync the 2D engine. On other devices it is harmless as the 2D engine is present but not in use when in gtt roll mode, on Cedartrail it causes a hang Without these changes 3.3-rc hangs on boot on Cedartrail based systems. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/gpu/drm/gma500/cdv_device.c | 2 ++ drivers/gpu/drm/gma500/framebuffer.c | 1 - drivers/gpu/drm/gma500/gtt.c | 9 ++++----- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c index 4a5b099c3bc5..53404af2e748 100644 --- a/drivers/gpu/drm/gma500/cdv_device.c +++ b/drivers/gpu/drm/gma500/cdv_device.c @@ -321,6 +321,8 @@ static int cdv_chip_setup(struct drm_device *dev) cdv_get_core_freq(dev); gma_intel_opregion_init(dev); psb_intel_init_bios(dev); + REG_WRITE(PORT_HOTPLUG_EN, 0); + REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); return 0; } diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c index 830dfdd6bf15..be616735ec91 100644 --- a/drivers/gpu/drm/gma500/framebuffer.c +++ b/drivers/gpu/drm/gma500/framebuffer.c @@ -247,7 +247,6 @@ static struct fb_ops psbfb_roll_ops = { .fb_imageblit = cfb_imageblit, .fb_pan_display = psbfb_pan, .fb_mmap = psbfb_mmap, - .fb_sync = psbfb_sync, .fb_ioctl = psbfb_ioctl, }; diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c index 5d5330f667f1..aff194fbe9f3 100644 --- a/drivers/gpu/drm/gma500/gtt.c +++ b/drivers/gpu/drm/gma500/gtt.c @@ -446,10 +446,9 @@ int psb_gtt_init(struct drm_device *dev, int resume) pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE); gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE) >> PAGE_SHIFT; - /* Some CDV firmware doesn't report this currently. In which case the - system has 64 gtt pages */ + /* CDV doesn't report this. In which case the system has 64 gtt pages */ if (pg->gtt_start == 0 || gtt_pages == 0) { - dev_err(dev->dev, "GTT PCI BAR not initialized.\n"); + dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n"); gtt_pages = 64; pg->gtt_start = dev_priv->pge_ctl; } @@ -461,10 +460,10 @@ int psb_gtt_init(struct drm_device *dev, int resume) if (pg->gatt_pages == 0 || pg->gatt_start == 0) { static struct resource fudge; /* Preferably peppermint */ - /* This can occur on CDV SDV systems. Fudge it in this case. + /* This can occur on CDV systems. Fudge it in this case. We really don't care what imaginary space is being allocated at this point */ - dev_err(dev->dev, "GATT PCI BAR not initialized.\n"); + dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n"); pg->gatt_start = 0x40000000; pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT; /* This is a little confusing but in fact the GTT is providing -- cgit v1.2.1 From 7a90484825680e7831856105f5fef654e6c02701 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 5 Mar 2012 17:48:12 +1100 Subject: md/raid10: fix assembling of arrays with replacement devices. commit 56a2559bb654a (md/raid10: recognise replacements ...) changed 'run' to set ->replacement or ->rdev depending on the 'Replacement' status if the device, but it didn't remove the old unconditional setting of 'rdev'. So it was largely ineffective. So remove that now. Signed-off-by: NeilBrown --- drivers/md/raid10.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index bd06ea21756c..58c44d6453a0 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3260,7 +3260,6 @@ static int run(struct mddev *mddev) disk->rdev = rdev; } - disk->rdev = rdev; disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk -- cgit v1.2.1 From 81caaf2503be8fbb738ea4f124063dcc24958397 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 5 Mar 2012 23:29:51 +0000 Subject: ARM: ecard: ensure fake vma vm_flags is setup Our TLB ops want to check the vma vm_flags to find out whether the mapping is executable. However, we leave this uninitialized in ecard.c. Initialize it with an appropriate value. Reported-by: Al Viro Signed-off-by: Russell King --- arch/arm/kernel/ecard.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 4dd0edab6a65..1651d4950744 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); + vma.vm_flags = VM_EXEC; vma.vm_mm = mm; flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); -- cgit v1.2.1 From c22ab332902333f83766017478c1ef6607ace681 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 5 Mar 2012 14:59:10 -0800 Subject: kmsg_dump: don't run on non-error paths by default Since commit 04c6862c055f ("kmsg_dump: add kmsg_dump() calls to the reboot, halt, poweroff and emergency_restart paths"), kmsg_dump() gets run on normal paths including poweroff and reboot. This is less than ideal given pstore implementations that can only represent single backtraces, since a reboot may overwrite a stored oops before it's been picked up by userspace. In addition, some pstore backends may have low performance and provide a significant delay in reboot as a result. This patch adds a printk.always_kmsg_dump kernel parameter (which can also be changed from userspace). Without it, the code will only be run on failure paths rather than on normal paths. The option can be enabled in environments where there's a desire to attempt to audit whether or not a reboot was cleanly requested or not. Signed-off-by: Matthew Garrett Acked-by: Seiji Aguchi Cc: Seiji Aguchi Cc: David Woodhouse Cc: Marco Stornelli Cc: Artem Bityutskiy Cc: KOSAKI Motohiro Cc: Vivek Goyal Cc: Don Zickus Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 6 ++++++ include/linux/kmsg_dump.h | 9 +++++++-- kernel/printk.c | 6 ++++++ 3 files changed, 19 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 033d4e69b43b..d99fd9c0ec0e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. default: off. + printk.always_kmsg_dump= + Trigger kmsg_dump for cases other than kernel oops or + panics + Format: (1/Y/y=enable, 0/N/n=disable) + default: disabled + printk.time= Show timing data prefixed to each printk message line Format: (1/Y/y=enable, 0/N/n=disable) diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h index fee66317e071..35f7237ec972 100644 --- a/include/linux/kmsg_dump.h +++ b/include/linux/kmsg_dump.h @@ -15,13 +15,18 @@ #include #include +/* + * Keep this list arranged in rough order of priority. Anything listed after + * KMSG_DUMP_OOPS will not be logged by default unless printk.always_kmsg_dump + * is passed to the kernel. + */ enum kmsg_dump_reason { - KMSG_DUMP_OOPS, KMSG_DUMP_PANIC, + KMSG_DUMP_OOPS, + KMSG_DUMP_EMERG, KMSG_DUMP_RESTART, KMSG_DUMP_HALT, KMSG_DUMP_POWEROFF, - KMSG_DUMP_EMERG, }; /** diff --git a/kernel/printk.c b/kernel/printk.c index 13c0a1143f49..32690a0b7a18 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -702,6 +702,9 @@ static bool printk_time = 0; #endif module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR); +static bool always_kmsg_dump; +module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR); + /* Check if we have any console registered that can be called early in boot. */ static int have_callable_console(void) { @@ -1732,6 +1735,9 @@ void kmsg_dump(enum kmsg_dump_reason reason) unsigned long l1, l2; unsigned long flags; + if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump) + return; + /* Theoretically, the log could move on after we do this, but there's not a lot we can do about that. The new messages will overwrite the start of what we dump. */ -- cgit v1.2.1 From f986a499ef6f317d906e6f6f281be966e1237a10 Mon Sep 17 00:00:00 2001 From: Prashanth Nageshappa Date: Mon, 5 Mar 2012 14:59:12 -0800 Subject: kprobes: return proper error code from register_kprobe() register_kprobe() aborts if the address of the new request falls in a prohibited area (such as ftrace pouch, __kprobes annotated functions, non-kernel text addresses, jump label text). We however don't return the right error on this abort, resulting in a silent failure - incorrect adding/reporting of kprobes ('perf probe do_fork+18' or 'perf probe mcount' for instance). In V2 we are incorporating Masami Hiramatsu's feedback. This patch fixes it by returning -EINVAL upon failure. While we are here, rename the label used for exit to be more appropriate. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Prashanth K Nageshappa Acked-by: Masami Hiramatsu Cc: Jason Baron Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kprobes.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 9788c0ec6f43..c62b8546cc90 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1334,8 +1334,10 @@ int __kprobes register_kprobe(struct kprobe *p) if (!kernel_text_address((unsigned long) p->addr) || in_kprobes_functions((unsigned long) p->addr) || ftrace_text_reserved(p->addr, p->addr) || - jump_label_text_reserved(p->addr, p->addr)) - goto fail_with_jump_label; + jump_label_text_reserved(p->addr, p->addr)) { + ret = -EINVAL; + goto cannot_probe; + } /* User can pass only KPROBE_FLAG_DISABLED to register_kprobe */ p->flags &= KPROBE_FLAG_DISABLED; @@ -1352,7 +1354,7 @@ int __kprobes register_kprobe(struct kprobe *p) * its code to prohibit unexpected unloading. */ if (unlikely(!try_module_get(probed_mod))) - goto fail_with_jump_label; + goto cannot_probe; /* * If the module freed .init.text, we couldn't insert @@ -1361,7 +1363,7 @@ int __kprobes register_kprobe(struct kprobe *p) if (within_module_init((unsigned long)p->addr, probed_mod) && probed_mod->state != MODULE_STATE_COMING) { module_put(probed_mod); - goto fail_with_jump_label; + goto cannot_probe; } /* ret will be updated by following code */ } @@ -1409,7 +1411,7 @@ out: return ret; -fail_with_jump_label: +cannot_probe: preempt_enable(); jump_label_unlock(); return ret; -- cgit v1.2.1 From 880641bb9da2473e9ecf6c708d993b29928c1b3c Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Mon, 5 Mar 2012 14:59:12 -0800 Subject: aio: wake up waiters when freeing unused kiocbs Bart Van Assche reported a hung fio process when either hot-removing storage or when interrupting the fio process itself. The (pruned) call trace for the latter looks like so: fio D 0000000000000001 0 6849 6848 0x00000004 ffff880092541b88 0000000000000046 ffff880000000000 ffff88012fa11dc0 ffff88012404be70 ffff880092541fd8 ffff880092541fd8 ffff880092541fd8 ffff880128b894d0 ffff88012404be70 ffff880092541b88 000000018106f24d Call Trace: schedule+0x3f/0x60 io_schedule+0x8f/0xd0 wait_for_all_aios+0xc0/0x100 exit_aio+0x55/0xc0 mmput+0x2d/0x110 exit_mm+0x10d/0x130 do_exit+0x671/0x860 do_group_exit+0x44/0xb0 get_signal_to_deliver+0x218/0x5a0 do_signal+0x65/0x700 do_notify_resume+0x65/0x80 int_signal+0x12/0x17 The problem lies with the allocation batching code. It will opportunistically allocate kiocbs, and then trim back the list of iocbs when there is not enough room in the completion ring to hold all of the events. In the case above, what happens is that the pruning back of events ends up freeing up the last active request and the context is marked as dead, so it is thus responsible for waking up waiters. Unfortunately, the code does not check for this condition, so we end up with a hung task. Signed-off-by: Jeff Moyer Reported-by: Bart Van Assche Tested-by: Bart Van Assche Cc: [3.2.x only] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/aio.c b/fs/aio.c index 969beb0e2231..67e4b9047cc9 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -490,6 +490,8 @@ static void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch) kmem_cache_free(kiocb_cachep, req); ctx->reqs_active--; } + if (unlikely(!ctx->reqs_active && ctx->dead)) + wake_up_all(&ctx->wait); spin_unlock_irq(&ctx->ctx_lock); } -- cgit v1.2.1 From c415c3b47ea2754659d915cca387a20999044163 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 5 Mar 2012 14:59:13 -0800 Subject: vfork: introduce complete_vfork_done() No functional changes. Move the clear-and-complete-vfork_done code into the new trivial helper, complete_vfork_done(). Signed-off-by: Oleg Nesterov Acked-by: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 8 ++------ include/linux/sched.h | 1 + kernel/fork.c | 17 ++++++++++------- 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 92ce83a11e90..dccdcec913e9 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1915,7 +1915,6 @@ static int coredump_wait(int exit_code, struct core_state *core_state) { struct task_struct *tsk = current; struct mm_struct *mm = tsk->mm; - struct completion *vfork_done; int core_waiters = -EBUSY; init_completion(&core_state->startup); @@ -1934,11 +1933,8 @@ static int coredump_wait(int exit_code, struct core_state *core_state) * Make sure nobody is waiting for us to release the VM, * otherwise we can deadlock when we wait on each other */ - vfork_done = tsk->vfork_done; - if (vfork_done) { - tsk->vfork_done = NULL; - complete(vfork_done); - } + if (tsk->vfork_done) + complete_vfork_done(tsk); if (core_waiters) wait_for_completion(&core_state->startup); diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6bfd88..1b25a37f2aee 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2291,6 +2291,7 @@ extern int do_execve(const char *, const char __user * const __user *, const char __user * const __user *, struct pt_regs *); extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *); +extern void complete_vfork_done(struct task_struct *tsk); struct task_struct *fork_idle(int); extern void set_task_comm(struct task_struct *tsk, char *from); diff --git a/kernel/fork.c b/kernel/fork.c index e2cd3e2a5ae8..cf3d96379608 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -668,6 +668,14 @@ struct mm_struct *mm_access(struct task_struct *task, unsigned int mode) return mm; } +void complete_vfork_done(struct task_struct *tsk) +{ + struct completion *vfork_done = tsk->vfork_done; + + tsk->vfork_done = NULL; + complete(vfork_done); +} + /* Please note the differences between mmput and mm_release. * mmput is called whenever we stop holding onto a mm_struct, * error success whatever. @@ -683,8 +691,6 @@ struct mm_struct *mm_access(struct task_struct *task, unsigned int mode) */ void mm_release(struct task_struct *tsk, struct mm_struct *mm) { - struct completion *vfork_done = tsk->vfork_done; - /* Get rid of any futexes when releasing the mm */ #ifdef CONFIG_FUTEX if (unlikely(tsk->robust_list)) { @@ -704,11 +710,8 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm) /* Get rid of any cached register state */ deactivate_mm(tsk, mm); - /* notify parent sleeping on vfork() */ - if (vfork_done) { - tsk->vfork_done = NULL; - complete(vfork_done); - } + if (tsk->vfork_done) + complete_vfork_done(tsk); /* * If we're exiting normally, clear a user-space tid field if -- cgit v1.2.1 From d68b46fe16ad59b3a5f51ec73daaa5dc06753798 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 5 Mar 2012 14:59:13 -0800 Subject: vfork: make it killable Make vfork() killable. Change do_fork(CLONE_VFORK) to do wait_for_completion_killable(). If it fails we do not return to the user-mode and never touch the memory shared with our child. However, in this case we should clear child->vfork_done before return, we use task_lock() in do_fork()->wait_for_vfork_done() and complete_vfork_done() to serialize with each other. Note: now that we use task_lock() we don't really need completion, we could turn task->vfork_done into "task_struct *wake_up_me" but this needs some complications. NOTE: this and the next patches do not affect in-kernel users of CLONE_VFORK, kernel threads run with all signals ignored including SIGKILL/SIGSTOP. However this is obviously the user-visible change. Not only a fatal signal can kill the vforking parent, a sub-thread can do execve or exit_group() and kill the thread sleeping in vfork(). Signed-off-by: Oleg Nesterov Acked-by: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 2 +- kernel/fork.c | 40 ++++++++++++++++++++++++++++++++-------- 2 files changed, 33 insertions(+), 9 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 1b25a37f2aee..b6467711f12e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2372,7 +2372,7 @@ static inline int thread_group_empty(struct task_struct *p) * Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring * subscriptions and synchronises with wait4(). Also used in procfs. Also * pins the final release of task.io_context. Also protects ->cpuset and - * ->cgroup.subsys[]. + * ->cgroup.subsys[]. And ->vfork_done. * * Nests both inside and outside of read_lock(&tasklist_lock). * It must not be nested with write_lock_irq(&tasklist_lock), diff --git a/kernel/fork.c b/kernel/fork.c index cf3d96379608..892c534ce6e3 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -670,10 +670,34 @@ struct mm_struct *mm_access(struct task_struct *task, unsigned int mode) void complete_vfork_done(struct task_struct *tsk) { - struct completion *vfork_done = tsk->vfork_done; + struct completion *vfork; - tsk->vfork_done = NULL; - complete(vfork_done); + task_lock(tsk); + vfork = tsk->vfork_done; + if (likely(vfork)) { + tsk->vfork_done = NULL; + complete(vfork); + } + task_unlock(tsk); +} + +static int wait_for_vfork_done(struct task_struct *child, + struct completion *vfork) +{ + int killed; + + freezer_do_not_count(); + killed = wait_for_completion_killable(vfork); + freezer_count(); + + if (killed) { + task_lock(child); + child->vfork_done = NULL; + task_unlock(child); + } + + put_task_struct(child); + return killed; } /* Please note the differences between mmput and mm_release. @@ -717,7 +741,8 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm) * If we're exiting normally, clear a user-space tid field if * requested. We leave this alone when dying by signal, to leave * the value intact in a core dump, and to save the unnecessary - * trouble otherwise. Userland only wants this done for a sys_exit. + * trouble, say, a killed vfork parent shouldn't touch this mm. + * Userland only wants this done for a sys_exit. */ if (tsk->clear_child_tid) { if (!(tsk->flags & PF_SIGNALED) && @@ -1551,6 +1576,7 @@ long do_fork(unsigned long clone_flags, if (clone_flags & CLONE_VFORK) { p->vfork_done = &vfork; init_completion(&vfork); + get_task_struct(p); } /* @@ -1568,10 +1594,8 @@ long do_fork(unsigned long clone_flags, ptrace_event(trace, nr); if (clone_flags & CLONE_VFORK) { - freezer_do_not_count(); - wait_for_completion(&vfork); - freezer_count(); - ptrace_event(PTRACE_EVENT_VFORK_DONE, nr); + if (!wait_for_vfork_done(p, &vfork)) + ptrace_event(PTRACE_EVENT_VFORK_DONE, nr); } } else { nr = PTR_ERR(p); -- cgit v1.2.1 From 57b59c4a1400fa6c34764eab2e35a8762dc05a09 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 5 Mar 2012 14:59:13 -0800 Subject: coredump_wait: don't call complete_vfork_done() Now that CLONE_VFORK is killable, coredump_wait() no longer needs complete_vfork_done(). zap_threads() should find and kill all tasks with the same ->mm, this includes our parent if ->vfork_done is set. mm_release() becomes the only caller, unexport complete_vfork_done(). Signed-off-by: Oleg Nesterov Acked-by: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 14 ++------------ include/linux/sched.h | 1 - kernel/fork.c | 2 +- 3 files changed, 3 insertions(+), 14 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index dccdcec913e9..153dee14fe55 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1926,19 +1926,9 @@ static int coredump_wait(int exit_code, struct core_state *core_state) core_waiters = zap_threads(tsk, mm, core_state, exit_code); up_write(&mm->mmap_sem); - if (unlikely(core_waiters < 0)) - goto fail; - - /* - * Make sure nobody is waiting for us to release the VM, - * otherwise we can deadlock when we wait on each other - */ - if (tsk->vfork_done) - complete_vfork_done(tsk); - - if (core_waiters) + if (core_waiters > 0) wait_for_completion(&core_state->startup); -fail: + return core_waiters; } diff --git a/include/linux/sched.h b/include/linux/sched.h index b6467711f12e..11fcafaf4ae4 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2291,7 +2291,6 @@ extern int do_execve(const char *, const char __user * const __user *, const char __user * const __user *, struct pt_regs *); extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *); -extern void complete_vfork_done(struct task_struct *tsk); struct task_struct *fork_idle(int); extern void set_task_comm(struct task_struct *tsk, char *from); diff --git a/kernel/fork.c b/kernel/fork.c index 892c534ce6e3..44b0e21af50e 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -668,7 +668,7 @@ struct mm_struct *mm_access(struct task_struct *task, unsigned int mode) return mm; } -void complete_vfork_done(struct task_struct *tsk) +static void complete_vfork_done(struct task_struct *tsk) { struct completion *vfork; -- cgit v1.2.1 From 6e27f63edbd7ab893258e16500171dd1270a1369 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 5 Mar 2012 14:59:14 -0800 Subject: vfork: kill PF_STARTING Previously it was (ab)used by utrace. Then it was wrongly used by the scheduler code. Currently it is not used, kill it before it finds the new erroneous user. Signed-off-by: Oleg Nesterov Acked-by: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 - kernel/fork.c | 9 --------- 2 files changed, 10 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 11fcafaf4ae4..0657368bd78f 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1777,7 +1777,6 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t * /* * Per process flags */ -#define PF_STARTING 0x00000002 /* being created */ #define PF_EXITING 0x00000004 /* getting shut down */ #define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */ #define PF_VCPU 0x00000010 /* I'm a virtual CPU */ diff --git a/kernel/fork.c b/kernel/fork.c index 44b0e21af50e..26a7a6707fa7 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1046,7 +1046,6 @@ static void copy_flags(unsigned long clone_flags, struct task_struct *p) new_flags &= ~(PF_SUPERPRIV | PF_WQ_WORKER); new_flags |= PF_FORKNOEXEC; - new_flags |= PF_STARTING; p->flags = new_flags; } @@ -1579,14 +1578,6 @@ long do_fork(unsigned long clone_flags, get_task_struct(p); } - /* - * We set PF_STARTING at creation in case tracing wants to - * use this to distinguish a fully live task from one that - * hasn't finished SIGSTOP raising yet. Now we clear it - * and set the child going. - */ - p->flags &= ~PF_STARTING; - wake_up_new_task(p); /* forking complete and child started to run, tell ptracer */ -- cgit v1.2.1 From 6027ce497d44dd8eae1a9215789df178f6b422cc Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 5 Mar 2012 14:59:14 -0800 Subject: hung_task: fix the broken rcu_lock_break() logic check_hung_uninterruptible_tasks()->rcu_lock_break() introduced by "softlockup: check all tasks in hung_task" commit ce9dbe24 looks absolutely wrong. - rcu_lock_break() does put_task_struct(). If the task has exited it is not safe to even read its ->state, nothing protects this task_struct. - The TASK_DEAD checks are wrong too. Contrary to the comment, we can't use it to check if the task was unhashed. It can be unhashed without TASK_DEAD, or it can be valid with TASK_DEAD. For example, an autoreaping task can do release_task(current) long before it sets TASK_DEAD in do_exit(). Or, a zombie task can have ->state == TASK_DEAD but release_task() was not called, and in this case we must not break the loop. Change this code to check pid_alive() instead, and do this before we drop the reference to the task_struct. Note: while_each_thread() under rcu_read_lock() is not really safe, it can livelock. This will be fixed later, but fortunately in this case the "max_count" logic saves us anyway. Signed-off-by: Oleg Nesterov Acked-by: Frederic Weisbecker Acked-by: Mandeep Singh Baines Acked-by: Paul E. McKenney Cc: Tetsuo Handa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/hung_task.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/kernel/hung_task.c b/kernel/hung_task.c index 2e48ec0c2e91..c21449f85a2a 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -119,15 +119,20 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout) * For preemptible RCU it is sufficient to call rcu_read_unlock in order * to exit the grace period. For classic RCU, a reschedule is required. */ -static void rcu_lock_break(struct task_struct *g, struct task_struct *t) +static bool rcu_lock_break(struct task_struct *g, struct task_struct *t) { + bool can_cont; + get_task_struct(g); get_task_struct(t); rcu_read_unlock(); cond_resched(); rcu_read_lock(); + can_cont = pid_alive(g) && pid_alive(t); put_task_struct(t); put_task_struct(g); + + return can_cont; } /* @@ -154,9 +159,7 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) goto unlock; if (!--batch_count) { batch_count = HUNG_TASK_BATCHING; - rcu_lock_break(g, t); - /* Exit if t or g was unhashed during refresh. */ - if (t->state == TASK_DEAD || g->state == TASK_DEAD) + if (!rcu_lock_break(g, t)) goto unlock; } /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */ -- cgit v1.2.1 From 7ad12566dc02ca76e0056af58606b5ce0181460f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 5 Mar 2012 14:59:15 -0800 Subject: pps: class_create() returns an ERR_PTR, not NULL class_create() never returns NULLs only ERR_PTRs. Signed-off-by: Dan Carpenter Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/pps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index 2baadd21b7a6..98fbe62694d4 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -369,9 +369,9 @@ static int __init pps_init(void) int err; pps_class = class_create(THIS_MODULE, "pps"); - if (!pps_class) { + if (IS_ERR(pps_class)) { pr_err("failed to allocate class\n"); - return -ENOMEM; + return PTR_ERR(pps_class); } pps_class->dev_attrs = pps_attrs; -- cgit v1.2.1 From 22ea71d7f49c3115e3a9ced5eac109fef26d3559 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 5 Mar 2012 14:59:15 -0800 Subject: c2port: class_create() returns an ERR_PTR class_create() doesn't return a NULL, it only returns ERR_PTRs. Signed-off-by: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/c2port/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index 19fc7c1cb428..f428d86bfc10 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -984,9 +984,9 @@ static int __init c2port_init(void) " - (C) 2007 Rodolfo Giometti\n"); c2port_class = class_create(THIS_MODULE, "c2port"); - if (!c2port_class) { + if (IS_ERR(c2port_class)) { printk(KERN_ERR "c2port: failed to allocate class\n"); - return -ENOMEM; + return PTR_ERR(c2port_class); } c2port_class->dev_attrs = c2port_attrs; -- cgit v1.2.1 From 73737b878767ef441d7cc34ebeeba01dd0a68dd6 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 5 Mar 2012 14:59:16 -0800 Subject: drivers/rtc/rtc-r9701.c: fix crash in r9701_remove() If probing the RTC didn't succeed due to failed RTC register access, the RTC device will be unregistered. Then, when removing the module r9701_remove() causes a kernel crash while trying to unregister a not registered RTC device. Fix this by doing RTC register access test before RTC device registration. Signed-off-by: Anatolij Gustschin Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-r9701.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c index 9beba49c3c5b..2853c2a6f10f 100644 --- a/drivers/rtc/rtc-r9701.c +++ b/drivers/rtc/rtc-r9701.c @@ -125,6 +125,13 @@ static int __devinit r9701_probe(struct spi_device *spi) unsigned char tmp; int res; + tmp = R100CNT; + res = read_regs(&spi->dev, &tmp, 1); + if (res || tmp != 0x20) { + dev_err(&spi->dev, "cannot read RTC register\n"); + return -ENODEV; + } + rtc = rtc_device_register("r9701", &spi->dev, &r9701_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) @@ -132,13 +139,6 @@ static int __devinit r9701_probe(struct spi_device *spi) dev_set_drvdata(&spi->dev, rtc); - tmp = R100CNT; - res = read_regs(&spi->dev, &tmp, 1); - if (res || tmp != 0x20) { - rtc_device_unregister(rtc); - return res; - } - return 0; } -- cgit v1.2.1 From 9ce70c0240d01309b34712f87eda4fbfba3c3764 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 5 Mar 2012 14:59:16 -0800 Subject: memcg: fix deadlock by inverting lrucare nesting We have forgotten the rules of lock nesting: the irq-safe ones must be taken inside the non-irq-safe ones, otherwise we are open to deadlock: CPU0 CPU1 ---- ---- lock(&(&pc->lock)->rlock); local_irq_disable(); lock(&(&zone->lru_lock)->rlock); lock(&(&pc->lock)->rlock); lock(&(&zone->lru_lock)->rlock); To check a different locking issue, I happened to add a spin_lock to memcg's bit_spin_lock in lock_page_cgroup(), and lockdep very quickly complained about __mem_cgroup_commit_charge_lrucare() (on CPU1 above). So delete __mem_cgroup_commit_charge_lrucare(), passing a bool lrucare to __mem_cgroup_commit_charge() instead, taking zone->lru_lock under lock_page_cgroup() in the lrucare case. The original was using spin_lock_irqsave, but we'd be in more trouble if it were ever called at interrupt time: unconditional _irq is enough. And ClearPageLRU before del from lru, SetPageLRU before add to lru: no strong reason, but that is the ordering used consistently elsewhere. Fixes 36b62ad539498d00c2d280a151a ("memcg: simplify corner case handling of LRU"). Signed-off-by: Hugh Dickins Acked-by: Johannes Weiner Cc: Konstantin Khlebnikov Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 72 +++++++++++++++++++++++++++++---------------------------- 1 file changed, 37 insertions(+), 35 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 228d6461c12a..1097d8098f8c 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2408,8 +2408,12 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg, struct page *page, unsigned int nr_pages, struct page_cgroup *pc, - enum charge_type ctype) + enum charge_type ctype, + bool lrucare) { + struct zone *uninitialized_var(zone); + bool was_on_lru = false; + lock_page_cgroup(pc); if (unlikely(PageCgroupUsed(pc))) { unlock_page_cgroup(pc); @@ -2420,6 +2424,21 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg, * we don't need page_cgroup_lock about tail pages, becase they are not * accessed by any other context at this point. */ + + /* + * In some cases, SwapCache and FUSE(splice_buf->radixtree), the page + * may already be on some other mem_cgroup's LRU. Take care of it. + */ + if (lrucare) { + zone = page_zone(page); + spin_lock_irq(&zone->lru_lock); + if (PageLRU(page)) { + ClearPageLRU(page); + del_page_from_lru_list(zone, page, page_lru(page)); + was_on_lru = true; + } + } + pc->mem_cgroup = memcg; /* * We access a page_cgroup asynchronously without lock_page_cgroup(). @@ -2443,9 +2462,18 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg, break; } + if (lrucare) { + if (was_on_lru) { + VM_BUG_ON(PageLRU(page)); + SetPageLRU(page); + add_page_to_lru_list(zone, page, page_lru(page)); + } + spin_unlock_irq(&zone->lru_lock); + } + mem_cgroup_charge_statistics(memcg, PageCgroupCache(pc), nr_pages); unlock_page_cgroup(pc); - WARN_ON_ONCE(PageLRU(page)); + /* * "charge_statistics" updated event counter. Then, check it. * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree. @@ -2643,7 +2671,7 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom); if (ret == -ENOMEM) return ret; - __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype); + __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype, false); return 0; } @@ -2663,35 +2691,6 @@ static void __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr, enum charge_type ctype); -static void -__mem_cgroup_commit_charge_lrucare(struct page *page, struct mem_cgroup *memcg, - enum charge_type ctype) -{ - struct page_cgroup *pc = lookup_page_cgroup(page); - struct zone *zone = page_zone(page); - unsigned long flags; - bool removed = false; - - /* - * In some case, SwapCache, FUSE(splice_buf->radixtree), the page - * is already on LRU. It means the page may on some other page_cgroup's - * LRU. Take care of it. - */ - spin_lock_irqsave(&zone->lru_lock, flags); - if (PageLRU(page)) { - del_page_from_lru_list(zone, page, page_lru(page)); - ClearPageLRU(page); - removed = true; - } - __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype); - if (removed) { - add_page_to_lru_list(zone, page, page_lru(page)); - SetPageLRU(page); - } - spin_unlock_irqrestore(&zone->lru_lock, flags); - return; -} - int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { @@ -2769,13 +2768,16 @@ static void __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *memcg, enum charge_type ctype) { + struct page_cgroup *pc; + if (mem_cgroup_disabled()) return; if (!memcg) return; cgroup_exclude_rmdir(&memcg->css); - __mem_cgroup_commit_charge_lrucare(page, memcg, ctype); + pc = lookup_page_cgroup(page); + __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype, true); /* * Now swap is on-memory. This means this page may be * counted both as mem and swap....double count. @@ -3248,7 +3250,7 @@ int mem_cgroup_prepare_migration(struct page *page, ctype = MEM_CGROUP_CHARGE_TYPE_CACHE; else ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM; - __mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype); + __mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype, false); return ret; } @@ -3332,7 +3334,7 @@ void mem_cgroup_replace_page_cache(struct page *oldpage, * the newpage may be on LRU(or pagevec for LRU) already. We lock * LRU while we overwrite pc->mem_cgroup. */ - __mem_cgroup_commit_charge_lrucare(newpage, memcg, type); + __mem_cgroup_commit_charge(memcg, newpage, 1, pc, type, true); } #ifdef CONFIG_DEBUG_VM -- cgit v1.2.1 From 9354f1b8e6c55c335d1c4fb10d0ae7a041935240 Mon Sep 17 00:00:00 2001 From: Muthu Kumar Date: Mon, 5 Mar 2012 14:59:16 -0800 Subject: floppy/scsi: fix setting of BIO flags Fix setting bio flags in drivers (sd_dif/floppy). Signed-off-by: Muthukumar R Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/floppy.c | 2 +- drivers/scsi/sd_dif.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 9baf11e86362..744f078f4dd8 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3832,7 +3832,7 @@ static int __floppy_read_block_0(struct block_device *bdev) bio.bi_size = size; bio.bi_bdev = bdev; bio.bi_sector = 0; - bio.bi_flags = BIO_QUIET; + bio.bi_flags = (1 << BIO_QUIET); init_completion(&complete); bio.bi_private = &complete; bio.bi_end_io = floppy_rb0_complete; diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 0cb39ff21171..f8fb2d691c0a 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -408,7 +408,7 @@ int sd_dif_prepare(struct request *rq, sector_t hw_sector, unsigned int sector_s kunmap_atomic(sdt, KM_USER0); } - bio->bi_flags |= BIO_MAPPED_INTEGRITY; + bio->bi_flags |= (1 << BIO_MAPPED_INTEGRITY); } return 0; -- cgit v1.2.1 From 9f78ff005a6b6313728247113948450b2adddde8 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 5 Mar 2012 14:59:17 -0800 Subject: debugobjects: Fix selftest for static warnings debugobjects is now printing a warning when a fixup for a NOTAVAILABLE object is run. This causes the selftest to fail like: ODEBUG: selftest warnings failed 4 != 5 We could just increase the number of warnings that the selftest is expecting to see because that is actually what has changed. But, it turns out that fixup_activate() was written with inverted logic and thus a fixup for a static object returned 1 indicating the object had been fixed, and 0 otherwise. Fix the logic to be correct and update the counts to reflect that nothing needed fixing for a static object. Signed-off-by: Stephen Boyd Reported-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/debugobjects.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/lib/debugobjects.c b/lib/debugobjects.c index 77cb245f8e7b..0ab9ae8057f0 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -818,17 +818,9 @@ static int __init fixup_activate(void *addr, enum debug_obj_state state) if (obj->static_init == 1) { debug_object_init(obj, &descr_type_test); debug_object_activate(obj, &descr_type_test); - /* - * Real code should return 0 here ! This is - * not a fixup of some bad behaviour. We - * merily call the debug_init function to keep - * track of the object. - */ - return 1; - } else { - /* Real code needs to emit a warning here */ + return 0; } - return 0; + return 1; case ODEBUG_STATE_ACTIVE: debug_object_deactivate(obj, &descr_type_test); @@ -967,7 +959,7 @@ static void __init debug_objects_selftest(void) obj.static_init = 1; debug_object_activate(&obj, &descr_type_test); - if (check_results(&obj, ODEBUG_STATE_ACTIVE, ++fixups, warnings)) + if (check_results(&obj, ODEBUG_STATE_ACTIVE, fixups, warnings)) goto out; debug_object_init(&obj, &descr_type_test); if (check_results(&obj, ODEBUG_STATE_INIT, ++fixups, ++warnings)) -- cgit v1.2.1 From 7512102cf64d36e3c7444480273623c7aab3563f Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 5 Mar 2012 14:59:18 -0800 Subject: memcg: fix GPF when cgroup removal races with last exit When moving tasks from old memcg (with move_charge_at_immigrate on new memcg), followed by removal of old memcg, hit General Protection Fault in mem_cgroup_lru_del_list() (called from release_pages called from free_pages_and_swap_cache from tlb_flush_mmu from tlb_finish_mmu from exit_mmap from mmput from exit_mm from do_exit). Somewhat reproducible, takes a few hours: the old struct mem_cgroup has been freed and poisoned by SLAB_DEBUG, but mem_cgroup_lru_del_list() is still trying to update its stats, and take page off lru before freeing. A task, or a charge, or a page on lru: each secures a memcg against removal. In this case, the last task has been moved out of the old memcg, and it is exiting: anonymous pages are uncharged one by one from the memcg, as they are zapped from its pagetables, so the charge gets down to 0; but the pages themselves are queued in an mmu_gather for freeing. Most of those pages will be on lru (and force_empty is careful to lru_add_drain_all, to add pages from pagevec to lru first), but not necessarily all: perhaps some have been isolated for page reclaim, perhaps some isolated for other reasons. So, force_empty may find no task, no charge and no page on lru, and let the removal proceed. There would still be no problem if these pages were immediately freed; but typically (and the put_page_testzero protocol demands it) they have to be added back to lru before they are found freeable, then removed from lru and freed. We don't see the issue when adding, because the mem_cgroup_iter() loops keep their own reference to the memcg being scanned; but when it comes to mem_cgroup_lru_del_list(). I believe this was not an issue in v3.2: there, PageCgroupAcctLRU and PageCgroupUsed flags were used (like a trick with mirrors) to deflect view of pc->mem_cgroup to the stable root_mem_cgroup when neither set. 38c5d72f3ebe ("memcg: simplify LRU handling by new rule") mercifully removed those convolutions, but left this General Protection Fault. But it's surprisingly easy to restore the old behaviour: just check PageCgroupUsed in mem_cgroup_lru_add_list() (which decides on which lruvec to add), and reset pc to root_mem_cgroup if page is uncharged. A risky change? just going back to how it worked before; testing, and an audit of uses of pc->mem_cgroup, show no problem. And there's a nice bonus: with mem_cgroup_lru_add_list() itself making sure that an uncharged page goes to root lru, mem_cgroup_reset_owner() no longer has any purpose, and we can safely revert 4e5f01c2b9b9 ("memcg: clear pc->mem_cgroup if necessary"). Calling update_page_reclaim_stat() after add_page_to_lru_list() in swap.c is not strictly necessary: the lru_lock there, with RCU before memcg structures are freed, makes mem_cgroup_get_reclaim_stat_from_page safe without that; but it seems cleaner to rely on one dependency less. Signed-off-by: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Johannes Weiner Cc: Konstantin Khlebnikov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 5 ----- mm/ksm.c | 11 ----------- mm/memcontrol.c | 30 +++++++++++++----------------- mm/migrate.c | 2 -- mm/swap.c | 8 +++++--- mm/swap_state.c | 10 ---------- 6 files changed, 18 insertions(+), 48 deletions(-) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 4d34356fe644..b80de520670b 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -129,7 +129,6 @@ extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg, extern void mem_cgroup_replace_page_cache(struct page *oldpage, struct page *newpage); -extern void mem_cgroup_reset_owner(struct page *page); #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP extern int do_swap_account; #endif @@ -392,10 +391,6 @@ static inline void mem_cgroup_replace_page_cache(struct page *oldpage, struct page *newpage) { } - -static inline void mem_cgroup_reset_owner(struct page *page) -{ -} #endif /* CONFIG_CGROUP_MEM_CONT */ #if !defined(CONFIG_CGROUP_MEM_RES_CTLR) || !defined(CONFIG_DEBUG_VM) diff --git a/mm/ksm.c b/mm/ksm.c index 1925ffbfb27f..310544a379ae 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -1572,16 +1571,6 @@ struct page *ksm_does_need_to_copy(struct page *page, new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address); if (new_page) { - /* - * The memcg-specific accounting when moving - * pages around the LRU lists relies on the - * page's owner (memcg) to be valid. Usually, - * pages are assigned to a new owner before - * being put on the LRU list, but since this - * is not the case here, the stale owner from - * a previous allocation cycle must be reset. - */ - mem_cgroup_reset_owner(new_page); copy_user_highpage(new_page, page, address, vma); SetPageDirty(new_page); diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 1097d8098f8c..d0e57a3cda18 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1042,6 +1042,19 @@ struct lruvec *mem_cgroup_lru_add_list(struct zone *zone, struct page *page, pc = lookup_page_cgroup(page); memcg = pc->mem_cgroup; + + /* + * Surreptitiously switch any uncharged page to root: + * an uncharged page off lru does nothing to secure + * its former mem_cgroup from sudden removal. + * + * Our caller holds lru_lock, and PageCgroupUsed is updated + * under page_cgroup lock: between them, they make all uses + * of pc->mem_cgroup safe. + */ + if (!PageCgroupUsed(pc) && memcg != root_mem_cgroup) + pc->mem_cgroup = memcg = root_mem_cgroup; + mz = page_cgroup_zoneinfo(memcg, page); /* compound_order() is stabilized through lru_lock */ MEM_CGROUP_ZSTAT(mz, lru) += 1 << compound_order(page); @@ -3029,23 +3042,6 @@ void mem_cgroup_uncharge_end(void) batch->memcg = NULL; } -/* - * A function for resetting pc->mem_cgroup for newly allocated pages. - * This function should be called if the newpage will be added to LRU - * before start accounting. - */ -void mem_cgroup_reset_owner(struct page *newpage) -{ - struct page_cgroup *pc; - - if (mem_cgroup_disabled()) - return; - - pc = lookup_page_cgroup(newpage); - VM_BUG_ON(PageCgroupUsed(pc)); - pc->mem_cgroup = root_mem_cgroup; -} - #ifdef CONFIG_SWAP /* * called after __delete_from_swap_cache() and drop "page" account. diff --git a/mm/migrate.c b/mm/migrate.c index df141f60289e..1503b6b54ecb 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -839,8 +839,6 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private, if (!newpage) return -ENOMEM; - mem_cgroup_reset_owner(newpage); - if (page_count(page) == 1) { /* page was freed from under us. So we are done. */ goto out; diff --git a/mm/swap.c b/mm/swap.c index fff1ff7fb9ad..14380e9fbe33 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -652,7 +652,7 @@ EXPORT_SYMBOL(__pagevec_release); void lru_add_page_tail(struct zone* zone, struct page *page, struct page *page_tail) { - int active; + int uninitialized_var(active); enum lru_list lru; const int file = 0; @@ -672,7 +672,6 @@ void lru_add_page_tail(struct zone* zone, active = 0; lru = LRU_INACTIVE_ANON; } - update_page_reclaim_stat(zone, page_tail, file, active); } else { SetPageUnevictable(page_tail); lru = LRU_UNEVICTABLE; @@ -693,6 +692,9 @@ void lru_add_page_tail(struct zone* zone, list_head = page_tail->lru.prev; list_move_tail(&page_tail->lru, list_head); } + + if (!PageUnevictable(page)) + update_page_reclaim_stat(zone, page_tail, file, active); } #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ @@ -710,8 +712,8 @@ static void __pagevec_lru_add_fn(struct page *page, void *arg) SetPageLRU(page); if (active) SetPageActive(page); - update_page_reclaim_stat(zone, page, file, active); add_page_to_lru_list(zone, page, lru); + update_page_reclaim_stat(zone, page, file, active); } /* diff --git a/mm/swap_state.c b/mm/swap_state.c index 470038a91873..ea6b32d61873 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -300,16 +300,6 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, new_page = alloc_page_vma(gfp_mask, vma, addr); if (!new_page) break; /* Out of memory */ - /* - * The memcg-specific accounting when moving - * pages around the LRU lists relies on the - * page's owner (memcg) to be valid. Usually, - * pages are assigned to a new owner before - * being put on the LRU list, but since this - * is not the case here, the stale owner from - * a previous allocation cycle must be reset. - */ - mem_cgroup_reset_owner(new_page); } /* -- cgit v1.2.1 From 62aca403657fe30e5235c5331e9871e676d9ea0a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 5 Mar 2012 14:59:19 -0800 Subject: alpha: fix 32/64-bit bug in futex support Michael Cree said: : : I have noticed some user space problems (pulseaudio crashes in pthread : : code, glibc/nptl test suite failures, java compiler freezes on SMP alpha : : systems) that arise when using a 2.6.39 or later kernel on Alpha. : : Bisecting between 2.6.38 and 2.6.39 (using glibc/nptl test suite as : : criterion for good/bad kernel) eventually leads to: : : : : 8d7718aa082aaf30a0b4989e1f04858952f941bc is the first bad commit : : commit 8d7718aa082aaf30a0b4989e1f04858952f941bc : : Author: Michel Lespinasse : : Date: Thu Mar 10 18:50:58 2011 -0800 : : : : futex: Sanitize futex ops argument types : : : : Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic : : prototypes to use u32 types for the futex as this is the data type the : : futex core code uses all over the place. : : : : Looking at the commit I see there is a change of the uaddr argument in : : the Alpha architecture specific code for futexes from int to u32, but I : : don't see why this should cause a problem. Richard Henderson said: : futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, : u32 oldval, u32 newval) : ... : : "r"(uaddr), "r"((long)oldval), "r"(newval) : : : There is no 32-bit compare instruction. These are implemented by : consistently extending the values to a 64-bit type. Since the : load instruction sign-extends, we want to sign-extend the other : quantity as well (despite the fact it's logically unsigned). : : So: : : - : "r"(uaddr), "r"((long)oldval), "r"(newval) : + : "r"(uaddr), "r"((long)(int)oldval), "r"(newval) : : should do the trick. Michael said: : This fixes the glibc test suite failures and the pulseaudio related : crashes, but it does not fix the java compiiler lockups that I was (and : are still) observing. That is some other problem. Reported-by: Michael Cree Tested-by: Michael Cree Acked-by: Phil Carmody Cc: Richard Henderson Cc: Michel Lespinasse Cc: Ivan Kokshaysky Reviewed-by: Matt Turner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/futex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h index e8a761aee088..f939794363ac 100644 --- a/arch/alpha/include/asm/futex.h +++ b/arch/alpha/include/asm/futex.h @@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " lda $31,3b-2b(%0)\n" " .previous\n" : "+r"(ret), "=&r"(prev), "=&r"(cmp) - : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "r"(uaddr), "r"((long)(int)oldval), "r"(newval) : "memory"); *uval = prev; -- cgit v1.2.1 From 1c641e84719429bbfe62a95ed3545ee7fe24408f Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Mon, 5 Mar 2012 14:59:20 -0800 Subject: mm: thp: fix BUG on mm->nr_ptes Dave Jones reports a few Fedora users hitting the BUG_ON(mm->nr_ptes...) in exit_mmap() recently. Quoting Hugh's discovery and explanation of the SMP race condition: "mm->nr_ptes had unusual locking: down_read mmap_sem plus page_table_lock when incrementing, down_write mmap_sem (or mm_users 0) when decrementing; whereas THP is careful to increment and decrement it under page_table_lock. Now most of those paths in THP also hold mmap_sem for read or write (with appropriate checks on mm_users), but two do not: when split_huge_page() is called by hwpoison_user_mappings(), and when called by add_to_swap(). It's conceivable that the latter case is responsible for the exit_mmap() BUG_ON mm->nr_ptes that has been reported on Fedora." The simplest way to fix it without having to alter the locking is to make split_huge_page() a noop in nr_ptes terms, so by counting the preallocated pagetables that exists for every mapped hugepage. It was an arbitrary choice not to count them and either way is not wrong or right, because they are not used but they're still allocated. Reported-by: Dave Jones Reported-by: Hugh Dickins Signed-off-by: Andrea Arcangeli Acked-by: Hugh Dickins Cc: David Rientjes Cc: Josh Boyer Cc: [3.0.x, 3.1.x, 3.2.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 91d3efb25d15..8f7fc394f636 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -671,6 +671,7 @@ static int __do_huge_pmd_anonymous_page(struct mm_struct *mm, set_pmd_at(mm, haddr, pmd, entry); prepare_pmd_huge_pte(pgtable, mm); add_mm_counter(mm, MM_ANONPAGES, HPAGE_PMD_NR); + mm->nr_ptes++; spin_unlock(&mm->page_table_lock); } @@ -789,6 +790,7 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm, pmd = pmd_mkold(pmd_wrprotect(pmd)); set_pmd_at(dst_mm, addr, dst_pmd, pmd); prepare_pmd_huge_pte(pgtable, dst_mm); + dst_mm->nr_ptes++; ret = 0; out_unlock: @@ -887,7 +889,6 @@ static int do_huge_pmd_wp_page_fallback(struct mm_struct *mm, } kfree(pages); - mm->nr_ptes++; smp_wmb(); /* make pte visible before pmd */ pmd_populate(mm, pmd, pgtable); page_remove_rmap(page); @@ -1047,6 +1048,7 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma, VM_BUG_ON(page_mapcount(page) < 0); add_mm_counter(tlb->mm, MM_ANONPAGES, -HPAGE_PMD_NR); VM_BUG_ON(!PageHead(page)); + tlb->mm->nr_ptes--; spin_unlock(&tlb->mm->page_table_lock); tlb_remove_page(tlb, page); pte_free(tlb->mm, pgtable); @@ -1375,7 +1377,6 @@ static int __split_huge_page_map(struct page *page, pte_unmap(pte); } - mm->nr_ptes++; smp_wmb(); /* make pte visible before pmd */ /* * Up to this point the pmd is present and huge and @@ -1988,7 +1989,6 @@ static void collapse_huge_page(struct mm_struct *mm, set_pmd_at(mm, address, pmd, _pmd); update_mmu_cache(vma, address, _pmd); prepare_pmd_huge_pte(pgtable, mm); - mm->nr_ptes--; spin_unlock(&mm->page_table_lock); #ifndef CONFIG_NUMA -- cgit v1.2.1 From e6ca7b89dc76abf77c80887fed54e0a60c87c0a8 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Mon, 5 Mar 2012 14:59:20 -0800 Subject: memcg: fix mapcount check in move charge code for anonymous page Currently the charge on shared anonyous pages is supposed not to moved in task migration. To implement this, we need to check that mapcount > 1, instread of > 2. So this patch fixes it. Signed-off-by: Naoya Horiguchi Reviewed-by: Daisuke Nishimura Cc: Andrea Arcangeli Cc: KAMEZAWA Hiroyuki Cc: Hillf Danton Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index d0e57a3cda18..5585dc3d3646 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5075,7 +5075,7 @@ static struct page *mc_handle_present_pte(struct vm_area_struct *vma, return NULL; if (PageAnon(page)) { /* we don't move shared anon */ - if (!move_anon() || page_mapcount(page) > 2) + if (!move_anon() || page_mapcount(page) > 1) return NULL; } else if (!move_file()) /* we ignore mapcount for file pages */ -- cgit v1.2.1 From b24823e61bfd93d0e72088e4f5245287582ed289 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Mon, 5 Mar 2012 14:59:21 -0800 Subject: rapidio/tsi721: fix queue wrapping bug in inbound doorbell handler Fix a bug that causes a kernel panic when the number of received doorbells is larger than number of entries in the inbound doorbell queue (current default value = 512). Another possible indication for this bug is large number of spurious doorbells reported by tsi721 driver after reaching the queue size maximum. Signed-off-by: Alexandre Bounine Cc: Chul Kim Cc: Matt Porter Cc: [3.2.x+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 691b1ab1a3d0..30d2072f480b 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -410,13 +410,14 @@ static void tsi721_db_dpc(struct work_struct *work) */ mport = priv->mport; - wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)); - rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE; while (wr_ptr != rd_ptr) { idb_entry = (u64 *)(priv->idb_base + (TSI721_IDB_ENTRY_SIZE * rd_ptr)); rd_ptr++; + rd_ptr %= IDB_QSIZE; idb.msg = *idb_entry; *idb_entry = 0; -- cgit v1.2.1 From f558b275439a9d14a1e2a754484f81ecebf56764 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 5 Mar 2012 16:02:18 -0800 Subject: Revert "ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP" This reverts commit c295fb633e321a7df3b8846c4eaddc5da3e0aaed. This makes existing .config files bloated by selecting in all omaps as noted by Russell King - ARM Linux . Signed-off-by: Tony Lindgren --- arch/arm/Makefile | 4 +++- arch/arm/mach-omap2/Kconfig | 51 +++++++++++++++------------------------------ 2 files changed, 20 insertions(+), 35 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ea69448be0ed..1683bfb9166f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -164,7 +164,9 @@ machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik machine-$(CONFIG_ARCH_OMAP1) := omap1 -machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2 +machine-$(CONFIG_ARCH_OMAP2) := omap2 +machine-$(CONFIG_ARCH_OMAP3) := omap2 +machine-$(CONFIG_ARCH_OMAP4) := omap2 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell machine-$(CONFIG_ARCH_PNX4008) := pnx4008 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index c4ae0a77f7b4..337f98dd8148 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -21,12 +21,16 @@ config ARCH_OMAP2PLUS_TYPICAL Compile a kernel suitable for booting most boards config ARCH_OMAP2 - bool + bool "TI OMAP2" + depends on ARCH_OMAP2PLUS + default y select CPU_V6 select MULTI_IRQ_HANDLER config ARCH_OMAP3 - bool + bool "TI OMAP3" + depends on ARCH_OMAP2PLUS + default y select CPU_V7 select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP @@ -35,7 +39,9 @@ config ARCH_OMAP3 select MULTI_IRQ_HANDLER config ARCH_OMAP4 - bool + bool "TI OMAP4" + default y + depends on ARCH_OMAP2PLUS select CACHE_L2X0 select CPU_V7 select ARM_GIC @@ -50,58 +56,36 @@ config ARCH_OMAP4 select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" - -config SOC_OMAP - bool + depends on ARCH_OMAP2 config SOC_OMAP2420 bool "OMAP2420 support" + depends on ARCH_OMAP2 default y - select SOC_OMAP - select ARCH_OMAP2 select OMAP_DM_TIMER select ARCH_OMAP_OTG config SOC_OMAP2430 bool "OMAP2430 support" + depends on ARCH_OMAP2 default y - select SOC_OMAP - select ARCH_OMAP2 select ARCH_OMAP_OTG config SOC_OMAP3430 bool "OMAP3430 support" + depends on ARCH_OMAP3 default y - select SOC_OMAP - select ARCH_OMAP3 select ARCH_OMAP_OTG config SOC_OMAPTI81XX bool "TI81XX support" + depends on ARCH_OMAP3 default y - select SOC_OMAP - select ARCH_OMAP3 config SOC_OMAPAM33XX bool "AM33XX support" + depends on ARCH_OMAP3 default y - select SOC_OMAP - select ARCH_OMAP3 - -config SOC_OMAP44XX - bool "OMAP44XX support" - default y - select SOC_OMAP - select ARCH_OMAP4 - -config SOC_OMAP_NOOP - bool - depends on !SOC_OMAP - default y - select ARCH_OMAP2 - select ARCH_OMAP3 - select ARCH_OMAP4 - select MACH_OMAP_GENERIC config OMAP_PACKAGE_ZAF bool @@ -128,17 +112,17 @@ config OMAP_PACKAGE_CBS bool comment "OMAP Board Type" + depends on ARCH_OMAP2PLUS config MACH_OMAP_GENERIC bool "Generic OMAP2+ board" + depends on ARCH_OMAP2PLUS select USE_OF default y help Support for generic TI OMAP2+ boards using Flattened Device Tree. More information at Documentation/devicetree -if SOC_OMAP - config MACH_OMAP2_TUSB6010 bool depends on ARCH_OMAP2 && SOC_OMAP2420 @@ -359,7 +343,6 @@ config MACH_OMAP4_PANDA select OMAP_PACKAGE_CBS select REGULATOR_FIXED_VOLTAGE if REGULATOR -endif config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 -- cgit v1.2.1 From dffc9daeec5e7e2a5bfcb7cbb5abf3a9dc64ffe1 Mon Sep 17 00:00:00 2001 From: Tarun Kanti DebBarma Date: Mon, 5 Mar 2012 16:11:00 -0800 Subject: ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support Since omap_dm_timer_write_reg/__omap_dm_timer_write is now modified to use timer->func_base OCP_CFG should not use this wrapper anymore. Instead use __raw_writel() directly and use timer->io_base instead to write to OCP_CFG. The timer->sys_stat is valid only if timer->revision is 1. In the context restore function make this correction. Save the contexts and loss count when timer is stopped. Also, disable the clock. Else, clock usecount would become imbalanced. Signed-off-by: Tarun Kanti DebBarma Tested-by: Omar Ramirez Luna Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index af3b92be8459..0b77fe87e010 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -80,9 +80,9 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, static void omap_timer_restore_context(struct omap_dm_timer *timer) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET, - timer->context.tiocp_cfg); - if (timer->revision > 1) + __raw_writel(timer->context.tiocp_cfg, + timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); + if (timer->revision == 1) __raw_writel(timer->context.tistat, timer->sys_stat); __raw_writel(timer->context.tisr, timer->irq_stat); @@ -357,6 +357,19 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); + if (timer->loses_context && timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + + /* + * Since the register values are computed and written within + * __omap_dm_timer_stop, we need to use read to retrieve the + * context. + */ + timer->context.tclr = + omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + timer->context.tisr = __raw_readl(timer->irq_stat); + omap_dm_timer_disable(timer); return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); -- cgit v1.2.1 From f611b020e74a41fb6460a5d5ca085d0c361b8b2f Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Mon, 5 Mar 2012 16:11:01 -0800 Subject: ARM: OMAP2+: GPMC: Export gpmc_enable_hwecc and gpmc_calculate_ecc To be able to compile kernel/drivers/mtd/nand/omap2.ko as module, that two symbols need to be exported. Otherwise, I get following error message ERROR: "gpmc_calculate_ecc" [drivers/mtd/nand/omap2.ko] undefined! ERROR: "gpmc_enable_hwecc" [drivers/mtd/nand/omap2.ko] undefined! Signed-off-by: Bernhard Walle Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index dfffbbf4c009..00d510858e28 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -888,6 +888,7 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) gpmc_write_reg(GPMC_ECC_CONFIG, val); return 0; } +EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); /** * gpmc_calculate_ecc - generate non-inverted ecc bytes @@ -918,3 +919,4 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) gpmc_ecc_used = -EINVAL; return 0; } +EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); -- cgit v1.2.1 From fb3cfb1ff9745e0c3aab92cc141c1b353839b0ab Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Mon, 5 Mar 2012 16:11:01 -0800 Subject: ARM: OMAP2+: id: Add am33xx SoC type detection Determine SoC type, i.e. whether GP or HS Note: cpu_is_34xx() is true for am33xx also. Doing cpu_is_am33xx() check after cpu_is_34xx() will not achieve what we want due to the above reason. Hence cpu_is_am33xx() is done before cpu_is_34xx() Signed-off-by: Afzal Mohammed Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/control.h | 5 +++++ arch/arm/mach-omap2/id.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 0ba68d3764bc..96c4bcc0a75c 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -338,6 +338,11 @@ #define AM35XX_HECC_SW_RST BIT(3) #define AM35XX_VPFE_PCLK_SW_RST BIT(4) +/* + * CONTROL AM33XX STATUS register + */ +#define AM33XX_CONTROL_STATUS 0x040 + /* * CONTROL OMAP STATUS register to identify OMAP3 features */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 6c5826605eae..134739751107 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -44,6 +44,8 @@ int omap_type(void) if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + } else if (cpu_is_am33xx()) { + val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); } else if (cpu_is_omap44xx()) { -- cgit v1.2.1 From b4c0a8a73b6a767550617339fb9129fbbebf82e3 Mon Sep 17 00:00:00 2001 From: Vaibhav Bedia Date: Mon, 5 Mar 2012 16:11:01 -0800 Subject: ARM: OMAP: sram: Add am33xx SRAM support (minimal) Update SRAM start & size for am33xx SoC's. Note: cpu_is_34xx() is true for am33xx also. Doing cpu_is_am33xx() check after cpu_is_34xx() will not achieve what we want due to the above reason. Hence cpu_is_am33xx() is done before cpu_is_34xx() Signed-off-by: Vaibhav Bedia Signed-off-by: Afzal Mohammed Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/sram.h | 1 + arch/arm/plat-omap/sram.c | 14 ++++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 75aa1b2bef51..227ae2657554 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -101,4 +101,5 @@ static inline void omap_push_sram_idle(void) {} #else #define OMAP4_SRAM_PA 0x40300000 #endif +#define AM33XX_SRAM_PA 0x40300000 #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4243bdcc87bc..596f2224e15a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -86,7 +86,7 @@ static int is_sram_locked(void) __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() && !cpu_is_am33xx()) { __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ @@ -124,7 +124,10 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x800; /* 2K */ } } else { - if (cpu_is_omap34xx()) { + if (cpu_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else if (cpu_is_omap44xx()) { @@ -368,6 +371,11 @@ static inline int omap34xx_sram_init(void) return 0; } +static inline int am33xx_sram_init(void) +{ + return 0; +} + int __init omap_sram_init(void) { omap_detect_sram(); @@ -379,6 +387,8 @@ int __init omap_sram_init(void) omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); + else if (cpu_is_am33xx()) + am33xx_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); -- cgit v1.2.1 From 17e22caccfcefc3f45ab5eaafe7279ada3b3fbd6 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Mon, 5 Mar 2012 16:11:02 -0800 Subject: ARM: omap: pandora: fix usbhs platform data It turned out wrong OMAP HSUSB port was configured on pandora, but still managed to work somehow. This was noticed after enabling in-kernel mux, where USB muxing was causing other devices not to work, because hsusb1 pins (instead of hsusb2) were wrongly remuxed, which are used for other things on pandora. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3pandora.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1644b73017fc..2224b5d873cd 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -343,7 +343,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"), + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -561,13 +561,13 @@ static struct platform_device *omap3pandora_devices[] __initdata = { static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, - .reset_gpio_port[0] = 16, - .reset_gpio_port[1] = -EINVAL, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 16, .reset_gpio_port[2] = -EINVAL }; -- cgit v1.2.1 From 7db74d5e327197289f2eb83c13f8d1b565a21467 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Mon, 5 Mar 2012 16:11:02 -0800 Subject: ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided If platform data is provided by the caller gpio_pendown is put into unused static ads7846_config structure and effectively has no effect. Of course caller can set gpio_pendown field in platform data himself but it seems natural to do this in ads7846_init to remove duplication. Signed-off-by: Igor Grinberg Signed-off-by: Ilya Yanok Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common-board-devices.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index bcb0c5817167..799a617ade30 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -76,13 +76,15 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, gpio_set_debounce(gpio_pendown, gpio_debounce); } - ads7846_config.gpio_pendown = gpio_pendown; - spi_bi->bus_num = bus_num; spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); - if (board_pdata) + if (board_pdata) { + board_pdata->gpio_pendown = gpio_pendown; spi_bi->platform_data = board_pdata; + } else { + ads7846_config.gpio_pendown = gpio_pendown; + } spi_register_board_info(&ads7846_spi_board_info, 1); } -- cgit v1.2.1 From be89cd9db41d7e39e8bebc71aee86938ee675f9c Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 5 Mar 2012 16:11:02 -0800 Subject: ARM: OMAP: don't build hwspinlock in vain Cleanup: don't build mach-omap2/hwspinlock.c if the OMAP hwspinlock driver isn't configured. This will both shorten build time and avoid registering a device which isn't needed. Signed-off-by: Ohad Ben-Cohen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bd76394ccaf8..caca7d460e13 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -268,6 +268,8 @@ obj-y += $(smc91x-m) $(smc91x-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) -obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o +ifneq ($(CONFIG_HWSPINLOCK_OMAP),) +obj-y += hwspinlock.o +endif obj-y += common-board-devices.o twl-common.o -- cgit v1.2.1 From 7bb8308588e59c4d5f1a31fd588d8b7854d08f80 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Mon, 5 Mar 2012 16:11:03 -0800 Subject: ARM: OMAP: clock.c: included linux/debugfs.h twice arch/arm/plat-omap/clock.c: included 'linux/debugfs.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/clock.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 567e4b54f245..56b6f8b7053e 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include -- cgit v1.2.1 From 31fc80a7a1c1df28ffb73a73b1e2c7f9d664435e Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Mon, 5 Mar 2012 16:11:03 -0800 Subject: ARM: OMAP2+: included some headers twice arch/arm/mach-omap2/: included some headers tiwce: - arch/arm/mach-omap2/board-ldp.c: 'linux/gpio.h' - arch/arm/mach-omap2/io.c: 'common.h' - arch/arm/mach-omap2/omap_hwmod_44xx_data.c: 'plat/i2c.h' Remove the duplicates. Signed-off-by: Danny Kukawka Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-ldp.c | 1 - arch/arm/mach-omap2/io.c | 1 - arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 1 - 3 files changed, 3 deletions(-) diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2d2a61f7dcbf..ac42ebeb184b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index eb50c29fb644..9bd07f33eea7 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -43,7 +43,6 @@ #include "clockdomain.h" #include #include -#include "common.h" /* * The machine specific code may provide the extra mapping besides the diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index ef0524c10a84..acb561ea7c11 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include -- cgit v1.2.1 From a90180d193ad56a3c4fb9cd39067f60d7503a4bf Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Mon, 5 Mar 2012 16:11:03 -0800 Subject: ARM: OMAP: Remove definition cpu_is_omap4430() The definition cpu_is_omap4430() always returns 0 even when CONFIG_ARCH_OMAP4 is enabled. This macro should be removed and the macro cpu_is_omap443x() should be used where needed for OMAP4430 devices. Signed-off-by: Jon Hunter Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/cpu.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 6b51086fce18..4f18eaed4511 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -250,7 +250,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap4430(): True for OMAP4430 * cpu_is_omap3505(): True for OMAP3505 * cpu_is_omap3517(): True for OMAP3517 */ @@ -299,7 +298,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap3505() 0 #define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 -#define cpu_is_omap4430() 0 #define cpu_is_omap3630() 0 /* -- cgit v1.2.1 From 44c568a8bb3cd59f27d5cca1b9c6977a002c1913 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Mon, 5 Mar 2012 16:11:03 -0800 Subject: ARM: OMAP: mailbox: trivial whitespace fix Trivial whitespace fix Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ad80112c2275..ad32621aa52e 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -307,7 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) if (!--mbox->use_count) { free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); - flush_work_sync(&mbox->rxq->work); + flush_work_sync(&mbox->rxq->work); mbox_queue_free(mbox->txq); mbox_queue_free(mbox->rxq); } -- cgit v1.2.1 From 33c3f71cf7033ffd108cbab7a75665a5e66a1be0 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Mon, 5 Mar 2012 16:11:04 -0800 Subject: ARM: OMAP1: Fix typo in lcd_dma.c Correct spelling "resulotion" to "resolution" in arch/arm/mach-omap1/lcd_dma.c Signed-off-by: Masanari Iida Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/lcd_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 453809359ba6..4c5ce7d829c2 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -117,7 +117,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " + printk(KERN_ERR "DMA virtual resolution is not supported " "in 1510 mode\n"); BUG(); } -- cgit v1.2.1 From 8eaa7bb0b363707db6d1323e4fbc0783bc55d22d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 5 Mar 2012 16:11:04 -0800 Subject: ARM: OMAP1: Fix section mismatch for omap1_init_early() Fix the following warning: WARNING: vmlinux.o(.text+0x1286c): Section mismatch in reference from the function omap1_init_early() to the function .init.text:omap1_clk_init() The function omap1_init_early() references the function __init omap1_clk_init(). This is often because omap1_init_early lacks a __init annotation or the annotation of omap1_clk_init is wrong. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 8e55b6fb3478..55a8f582d04c 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -118,7 +118,7 @@ void __init omap16xx_map_io(void) /* * Common low-level hardware init for omap1. */ -void omap1_init_early(void) +void __init omap1_init_early(void) { omap_check_revision(); -- cgit v1.2.1 From 5cb917bc4f3882ecee87064483111023086757d3 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Mon, 5 Mar 2012 19:53:50 +0000 Subject: tg3: Fix to use multi queue BQL interfaces Fix tg3 to use BQL multi queue related netdev interfaces since the device supports multi queue. Signed-off-by: Tom Herbert Reported-by: Christoph Lameter Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 423d0235a878..35c2a202d67a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -5352,7 +5352,7 @@ static void tg3_tx(struct tg3_napi *tnapi) } } - netdev_completed_queue(tp->dev, pkts_compl, bytes_compl); + netdev_tx_completed_queue(txq, pkts_compl, bytes_compl); tnapi->tx_cons = sw_idx; @@ -6793,7 +6793,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) } skb_tx_timestamp(skb); - netdev_sent_queue(tp->dev, skb->len); + netdev_tx_sent_queue(txq, skb->len); /* Packets are ready, update Tx producer idx local and on card. */ tw32_tx_mbox(tnapi->prodmbox, entry); @@ -7275,8 +7275,8 @@ static void tg3_free_rings(struct tg3 *tp) dev_kfree_skb_any(skb); } + netdev_tx_reset_queue(netdev_get_tx_queue(tp->dev, j)); } - netdev_reset_queue(tp->dev); } /* Initialize tx/rx rings for packet processing. -- cgit v1.2.1 From bbdc818b270ab47658019fb1d67a0f14e9b17985 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Tue, 28 Feb 2012 10:57:48 +0800 Subject: ARM: pxa: add dummy clock for pxa25x and pxa27x gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the essential component on pxa3xx/pxa95x and arch-mmp. So we need to define dummy clock in pxa25x/pxa27x instead. This regression was introduced by the commit "ARM: pxa: add dummy clock for sa1100-rtc", id a55b5adaf403c4d032e0871ad4ee3367782f4db6. Reported-by: Jonathan Cameron Signed-off-by: Paul Parsons Tested-by: Robert Jarzmik Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/pxa25x.c | 1 + arch/arm/mach-pxa/pxa27x.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 00d6eacab8e4..d8de3e50a78a 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -208,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c1673b3441d4..a3fabc9dfa26 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -229,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; #ifdef CONFIG_PM -- cgit v1.2.1 From 0c7de34be3e1f0c3031f9e0c23d3d7e51db317ba Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Tue, 6 Mar 2012 14:37:04 +0800 Subject: ARM: pxa: remove duplicated registeration on pxa-gpio Both reboot (via reboot(RB_AUTOBOOT)) and suspend freeze on hx4700. Registration of pxa_gpio_syscore_ops is moved into pxa-gpio driver, but it still exists in arch-pxa directory. It resulsts failure on reboot and suspend. Now remove the registration code in arch-pxa. Reported-by: Paul Parsons Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/generic.h | 1 - arch/arm/mach-pxa/pxa25x.c | 1 - arch/arm/mach-pxa/pxa27x.c | 1 - arch/arm/mach-pxa/pxa3xx.c | 1 - arch/arm/mach-pxa/pxa95x.c | 1 - 5 files changed, 5 deletions(-) diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 0d729e6619df..42d5cca66257 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int); #endif extern struct syscore_ops pxa_irq_syscore_ops; -extern struct syscore_ops pxa_gpio_syscore_ops; extern struct syscore_ops pxa2xx_mfp_syscore_ops; extern struct syscore_ops pxa3xx_mfp_syscore_ops; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index d8de3e50a78a..3352b37b60cf 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -368,7 +368,6 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(pxa25x_devices, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index a3fabc9dfa26..6bce78edce7a 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -456,7 +456,6 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4f402afa6609..3918a672238e 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -462,7 +462,6 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa3xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index d082a583df78..5ce434b95e87 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -283,7 +283,6 @@ static int __init pxa95x_init(void) return ret; register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); -- cgit v1.2.1 From af829310e8a914ad17ed61a7b18b14b4f457bca1 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Tue, 6 Mar 2012 14:57:16 +0800 Subject: ARM: pxa: fix invalid mfp pin issue Failure is reported on hx4700 with kernel v3.3-rc1. __mfp_validate: GPIO20 is invalid pin __mfp_validate: GPIO21 is invalid pin __mfp_validate: GPIO15 is invalid pin __mfp_validate: GPIO78 is invalid pin __mfp_validate: GPIO79 is invalid pin __mfp_validate: GPIO80 is invalid pin __mfp_validate: GPIO33 is invalid pin __mfp_validate: GPIO48 is invalid pin __mfp_validate: GPIO49 is invalid pin __mfp_validate: GPIO50 is invalid pin Since pxa_last_gpio is used in mfp-pxa2xx driver. But it's only updated in pxa-gpio driver that run after mfp-pxa2xx driver. So update the pxa_last_gpio first in mfp-pxa2xx driver. Reported-by: Paul Parsons Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/mfp-pxa2xx.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index f14775536b83..29b62afc6f7c 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void) { int i; + /* running before pxa_gpio_probe() */ +#ifdef CONFIG_CPU_PXA26x + pxa_last_gpio = 89; +#else + pxa_last_gpio = 84; +#endif for (i = 0; i <= pxa_last_gpio; i++) gpio_desc[i].valid = 1; @@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void) { int i, gpio; + pxa_last_gpio = 120; /* running before pxa_gpio_probe() */ for (i = 0; i <= pxa_last_gpio; i++) { /* skip GPIO2, 5, 6, 7, 8, they are not * valid pins allow configuration -- cgit v1.2.1 From 8f2392142346f2754c8292a94cc62a157ed1e093 Mon Sep 17 00:00:00 2001 From: Marton Balint Date: Mon, 5 Mar 2012 21:33:23 +0100 Subject: ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c. Raymond helped me to add the necessary pin fixup to make it appear again. In fact, this is basically his patch. It fixes alsa bug #5541. Signed-off-by: Marton Balint Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f286bb8fda13..5e530205bba4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4367,6 +4367,7 @@ enum { ALC882_FIXUP_PB_M5210, ALC882_FIXUP_ACER_ASPIRE_7736, ALC882_FIXUP_ASUS_W90V, + ALC889_FIXUP_CD, ALC889_FIXUP_VAIO_TT, ALC888_FIXUP_EEE1601, ALC882_FIXUP_EAPD, @@ -4494,6 +4495,13 @@ static const struct alc_fixup alc882_fixups[] = { { } } }, + [ALC889_FIXUP_CD] = { + .type = ALC_FIXUP_PINS, + .v.pins = (const struct alc_pincfg[]) { + { 0x1c, 0x993301f0 }, /* CD */ + { } + } + }, [ALC889_FIXUP_VAIO_TT] = { .type = ALC_FIXUP_PINS, .v.pins = (const struct alc_pincfg[]) { @@ -4650,6 +4658,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC882_FIXUP_EAPD), SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3), + SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3", ALC889_FIXUP_CD), SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX), SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD), -- cgit v1.2.1 From 63f32b3893aba641504d744d58ab5ed6f528fc7c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 6 Mar 2012 02:25:15 -0800 Subject: ARM: EXYNOS: fix touchscreen IRQ setup on Universal C210 board Fixes atmel_mxt_ts freeze on Universal C210. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-universal_c210.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 0fc65ffde8ff..38939956c34f 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = { .threshold = 0x28, .voltage = 2800000, /* 2.8V */ .orient = MXT_DIAGONAL, + .irqflags = IRQF_TRIGGER_FALLING, }; static struct i2c_board_info i2c3_devs[] __initdata = { -- cgit v1.2.1 From 1dbd02ec389b11ffc6288695e13c5754e6e07847 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Thu, 1 Mar 2012 17:13:59 -0700 Subject: ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER As done for the other ep93xx machines in: commit 9a6879bd902e2ec605fff4d9fb3247b440a1f66a ARM: ep93xx: convert to MULTI_IRQ_HANDLER Now that there is a generic IRQ handler for multiple VIC devices use it for vision_ep9307 to help building multi platform kernels. Signed-off-by: Hartley Sweeten Acked-by: Ryan Mallon Reviewed-by: Jamie Iles Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/vision_ep9307.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index d5fb44f16d31..d67d0b4feb6f 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -34,6 +34,7 @@ #include #include +#include #include #include #include @@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = vision_init_machine, .restart = ep93xx_restart, -- cgit v1.2.1 From c09ff089aa62380ad904ea785bd713c56720270e Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 5 Mar 2012 20:52:55 -0800 Subject: page_cgroup: fix horrid swap accounting regression Why is memcg's swap accounting so broken? Insane counts, wrong ownership, unfreeable structures, which later get freed and then accessed after free. Turns out to be a tiny a little 3.3-rc1 regression in 9fb4b7cc0724 "page_cgroup: add helper function to get swap_cgroup": the helper function (actually named lookup_swap_cgroup()) returns an address using void* arithmetic, but the structure in question is a short. Signed-off-by: Hugh Dickins Reviewed-by: Bob Liu Cc: Michal Hocko Cc: KAMEZAWA Hiroyuki Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_cgroup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index de1616aa9b1e..1ccbd714059c 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -379,13 +379,15 @@ static struct swap_cgroup *lookup_swap_cgroup(swp_entry_t ent, pgoff_t offset = swp_offset(ent); struct swap_cgroup_ctrl *ctrl; struct page *mappage; + struct swap_cgroup *sc; ctrl = &swap_cgroup_ctrl[swp_type(ent)]; if (ctrlp) *ctrlp = ctrl; mappage = ctrl->map[offset / SC_PER_PAGE]; - return page_address(mappage) + offset % SC_PER_PAGE; + sc = page_address(mappage); + return sc + offset % SC_PER_PAGE; } /** -- cgit v1.2.1 From 5756b76e4db643d8f75174a9a50038523d4b9e32 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 5 Mar 2012 16:49:24 +0000 Subject: vsprintf: make %pV handling compatible with kasprintf() kasprintf() (and potentially other functions that I didn't run across so far) want to evaluate argument lists twice. Caring to do so for the primary list is obviously their job, but they can't reasonably be expected to check the format string for instances of %pV, which however need special handling too: On architectures like x86-64 (as opposed to e.g. ix86), using the same argument list twice doesn't produce the expected results, as an internally managed cursor gets updated during the first run. Fix the problem by always acting on a copy of the original list when handling %pV. Signed-off-by: Jan Beulich Signed-off-by: Linus Torvalds --- lib/vsprintf.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 8e75003d62f6..38e612e66da5 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -891,9 +891,15 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr, case 'U': return uuid_string(buf, end, ptr, spec, fmt); case 'V': - return buf + vsnprintf(buf, end > buf ? end - buf : 0, - ((struct va_format *)ptr)->fmt, - *(((struct va_format *)ptr)->va)); + { + va_list va; + + va_copy(va, *((struct va_format *)ptr)->va); + buf += vsnprintf(buf, end > buf ? end - buf : 0, + ((struct va_format *)ptr)->fmt, va); + va_end(va); + return buf; + } case 'K': /* * %pK cannot be used in IRQ context because its test -- cgit v1.2.1 From 4648dc97af9d496218a05353b0e442b3dfa6aaab Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Mon, 5 Mar 2012 19:35:04 +0000 Subject: tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una This commit fixes tcp_shift_skb_data() so that it does not shift SACKed data below snd_una. This fixes an issue whose symptoms exactly match reports showing tp->sacked_out going negative since 3.3.0-rc4 (see "WARNING: at net/ipv4/tcp_input.c:3418" thread on netdev). Since 2008 (832d11c5cd076abc0aa1eaf7be96c81d1a59ce41) tcp_shift_skb_data() had been shifting SACKed ranges that were below snd_una. It checked that the *end* of the skb it was about to shift from was above snd_una, but did not check that the end of the actual shifted range was above snd_una; this commit adds that check. Shifting SACKed ranges below snd_una is problematic because for such ranges tcp_sacktag_one() short-circuits: it does not declare anything as SACKed and does not increase sacked_out. Before the fixes in commits cc9a672ee522d4805495b98680f4a3db5d0a0af9 and daef52bab1fd26e24e8e9578f8fb33ba1d0cb412, shifting SACKed ranges below snd_una happened to work because tcp_shifted_skb() was always (incorrectly) passing in to tcp_sacktag_one() an skb whose end_seq tcp_shift_skb_data() had already guaranteed was beyond snd_una. Hence tcp_sacktag_one() never short-circuited and always increased tp->sacked_out in this case. After those two fixes, my testing has verified that shifting SACKed ranges below snd_una could cause tp->sacked_out to go negative with the following sequence of events: (1) tcp_shift_skb_data() sees an skb whose end_seq is beyond snd_una, then shifts a prefix of that skb that is below snd_una (2) tcp_shifted_skb() increments the packet count of the already-SACKed prev sk_buff (3) tcp_sacktag_one() sees the end of the new SACKed range is below snd_una, so it short-circuits and doesn't increase tp->sacked_out (5) tcp_clean_rtx_queue() sees the SACKed skb has been ACKed, decrements tp->sacked_out by this "inflated" pcount that was missing a matching increase in tp->sacked_out, and hence tp->sacked_out underflows to a u32 like 0xFFFFFFFF, which casted to s32 is negative. (6) this leads to the warnings seen in the recent "WARNING: at net/ipv4/tcp_input.c:3418" thread on the netdev list; e.g.: tcp_input.c:3418 WARN_ON((int)tp->sacked_out < 0); More generally, I think this bug can be tickled in some cases where two or more ACKs from the receiver are lost and then a DSACK arrives that is immediately above an existing SACKed skb in the write queue. This fix changes tcp_shift_skb_data() to abort this sequence at step (1) in the scenario above by noticing that the bytes are below snd_una and not shifting them. Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index d9b83d198c3d..b5e315f13641 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1585,6 +1585,10 @@ static struct sk_buff *tcp_shift_skb_data(struct sock *sk, struct sk_buff *skb, } } + /* tcp_sacktag_one() won't SACK-tag ranges below snd_una */ + if (!after(TCP_SKB_CB(skb)->seq + len, tp->snd_una)) + goto fallback; + if (!skb_shift(prev, skb, len)) goto fallback; if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack)) -- cgit v1.2.1 From 2a15cd2ff488a9fdb55e5e34060f499853b27c77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Tue, 6 Mar 2012 01:14:12 +0000 Subject: r8169: runtime resume before shutdown. With runtime PM, if the ethernet cable is disconnected, the device is transitioned to D3 state to conserve energy. If the system is shutdown in this state, any register accesses in rtl_shutdown are dropped on the floor. As the device was programmed by .runtime_suspend() to wake on link changes, it is thus brought back up as soon as the link recovers. Resuming every suspended device through the driver core would slow things down and it is not clear how many devices really need it now. Original report and D0 transition patch by Sameer Nanda. Patch has been changed to comply with advices by Rafael J. Wysocki and the PM folks. Reported-by: Sameer Nanda Signed-off-by: Francois Romieu Cc: Rafael J. Wysocki Cc: Hayes Wang Cc: Alan Stern Acked-by: Rafael J. Wysocki Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 1adf17757cea..bbacb3741ec0 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6194,6 +6194,9 @@ static void rtl_shutdown(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct rtl8169_private *tp = netdev_priv(dev); + struct device *d = &pdev->dev; + + pm_runtime_get_sync(d); rtl8169_net_suspend(dev); @@ -6215,6 +6218,8 @@ static void rtl_shutdown(struct pci_dev *pdev) pci_wake_from_d3(pdev, true); pci_set_power_state(pdev, PCI_D3hot); } + + pm_runtime_put_noidle(d); } static struct pci_driver rtl8169_pci_driver = { -- cgit v1.2.1 From 848edc69192a38bf9d261032f248b14f47e6af8b Mon Sep 17 00:00:00 2001 From: Santosh Nayak Date: Tue, 6 Mar 2012 01:22:50 +0000 Subject: netfilter: ebtables: fix wrong name length while copying to user-space user-space ebtables expects 32 bytes-long names, but xt_match names use 29 bytes. We have to copy less 29 bytes and then, make sure we fill the remaining bytes with zeroes. Signed-off-by: Santosh Nayak Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/bridge/netfilter/ebtables.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 8aa4ad0e06af..15e9575f7207 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1335,7 +1335,12 @@ static inline int ebt_make_matchname(const struct ebt_entry_match *m, const char *base, char __user *ubase) { char __user *hlp = ubase + ((char *)m - base); - if (copy_to_user(hlp, m->u.match->name, EBT_FUNCTION_MAXNAMELEN)) + char name[EBT_FUNCTION_MAXNAMELEN] = {}; + + /* ebtables expects 32 bytes long names but xt_match names are 29 bytes + long. Copy 29 bytes and fill remaining bytes with zeroes. */ + strncpy(name, m->u.match->name, sizeof(name)); + if (copy_to_user(hlp, name, EBT_FUNCTION_MAXNAMELEN)) return -EFAULT; return 0; } @@ -1344,7 +1349,10 @@ static inline int ebt_make_watchername(const struct ebt_entry_watcher *w, const char *base, char __user *ubase) { char __user *hlp = ubase + ((char *)w - base); - if (copy_to_user(hlp , w->u.watcher->name, EBT_FUNCTION_MAXNAMELEN)) + char name[EBT_FUNCTION_MAXNAMELEN] = {}; + + strncpy(name, w->u.watcher->name, sizeof(name)); + if (copy_to_user(hlp , name, EBT_FUNCTION_MAXNAMELEN)) return -EFAULT; return 0; } @@ -1355,10 +1363,12 @@ ebt_make_names(struct ebt_entry *e, const char *base, char __user *ubase) int ret; char __user *hlp; const struct ebt_entry_target *t; + char name[EBT_FUNCTION_MAXNAMELEN] = {}; if (e->bitmask == 0) return 0; + strncpy(name, t->u.target->name, sizeof(name)); hlp = ubase + (((char *)e + e->target_offset) - base); t = (struct ebt_entry_target *)(((char *)e) + e->target_offset); @@ -1368,7 +1378,7 @@ ebt_make_names(struct ebt_entry *e, const char *base, char __user *ubase) ret = EBT_WATCHER_ITERATE(e, ebt_make_watchername, base, ubase); if (ret != 0) return ret; - if (copy_to_user(hlp, t->u.target->name, EBT_FUNCTION_MAXNAMELEN)) + if (copy_to_user(hlp, name, EBT_FUNCTION_MAXNAMELEN)) return -EFAULT; return 0; } -- cgit v1.2.1 From 8be619d1e430fd87a02587a2a6830b692cb91b84 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 6 Mar 2012 01:22:51 +0000 Subject: netfilter: ctnetlink: remove incorrect spin_[un]lock_bh on NAT module autoload Since 7d367e0, ctnetlink_new_conntrack is called without holding the nf_conntrack_lock spinlock. Thus, ctnetlink_parse_nat_setup does not require to release that spinlock anymore in the NAT module autoload case. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_netlink.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 30c9d4ca0218..10687692831e 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1041,16 +1041,13 @@ ctnetlink_parse_nat_setup(struct nf_conn *ct, if (!parse_nat_setup) { #ifdef CONFIG_MODULES rcu_read_unlock(); - spin_unlock_bh(&nf_conntrack_lock); nfnl_unlock(); if (request_module("nf-nat-ipv4") < 0) { nfnl_lock(); - spin_lock_bh(&nf_conntrack_lock); rcu_read_lock(); return -EOPNOTSUPP; } nfnl_lock(); - spin_lock_bh(&nf_conntrack_lock); rcu_read_lock(); if (nfnetlink_parse_nat_setup_hook) return -EAGAIN; -- cgit v1.2.1 From a157b9d5b5b626e46eba2ac4e342da8db25cabc4 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 6 Mar 2012 01:22:53 +0000 Subject: netfilter: bridge: fix wrong pointer dereference In adf7ff8, a invalid dereference was added in ebt_make_names. CC [M] net/bridge/netfilter/ebtables.o net/bridge/netfilter/ebtables.c: In function `ebt_make_names': net/bridge/netfilter/ebtables.c:1371:20: warning: `t' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/bridge/netfilter/ebtables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 15e9575f7207..5fe2ff3b01ef 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1368,7 +1368,6 @@ ebt_make_names(struct ebt_entry *e, const char *base, char __user *ubase) if (e->bitmask == 0) return 0; - strncpy(name, t->u.target->name, sizeof(name)); hlp = ubase + (((char *)e + e->target_offset) - base); t = (struct ebt_entry_target *)(((char *)e) + e->target_offset); @@ -1378,6 +1377,7 @@ ebt_make_names(struct ebt_entry *e, const char *base, char __user *ubase) ret = EBT_WATCHER_ITERATE(e, ebt_make_watchername, base, ubase); if (ret != 0) return ret; + strncpy(name, t->u.target->name, sizeof(name)); if (copy_to_user(hlp, name, EBT_FUNCTION_MAXNAMELEN)) return -EFAULT; return 0; -- cgit v1.2.1 From 739e4505a0e8209622dc71743bfa1c804eacf7f4 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 6 Mar 2012 01:22:54 +0000 Subject: bridge: netfilter: don't call iptables on vlan packets if sysctl is off When net.bridge.bridge-nf-filter-vlan-tagged is 0 (default), vlan packets arriving should not be sent to ip(6)tables by bridge netfilter. However, it turns out that we currently always send VLAN packets to netfilter, if .. a), CONFIG_VLAN_8021Q is enabled ; or b), CONFIG_VLAN_8021Q is not set but rx vlan offload is enabled on the bridge port. This is because bridge netfilter treats skb with skb->protocol == ETH_P_IP{V6} as "non-vlan packet". With rx vlan offload on or CONFIG_VLAN_8021Q=y, the vlan header has already been removed here, and we cannot rely on skb->protocol alone. Fix this by only using skb->protocol if the skb has no vlan tag, or if a vlan tag is present and filter-vlan-tagged bridge netfilter sysctl is enabled. We cannot remove the skb->protocol == htons(ETH_P_8021Q) test because the vlan tag is still around in the CONFIG_VLAN_8021Q=n && "ethtool -K $itf rxvlan off" case. reproducer: iptables -t raw -I PREROUTING -i br0 iptables -t raw -I PREROUTING -i br0.1 Then send packets to an ip address configured on br0.1 interface. Even with net.bridge.bridge-nf-filter-vlan-tagged=0, the 1st rule will match instead of the 2nd one. With this patch applied, the 2nd rule will match instead. In the non-local address case, netfilter won't be consulted after this patch unless the sysctl is switched on. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/bridge/br_netfilter.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 84122472656c..dec4f3817133 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -62,6 +62,15 @@ static int brnf_filter_pppoe_tagged __read_mostly = 0; #define brnf_filter_pppoe_tagged 0 #endif +#define IS_IP(skb) \ + (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_IP)) + +#define IS_IPV6(skb) \ + (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_IPV6)) + +#define IS_ARP(skb) \ + (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_ARP)) + static inline __be16 vlan_proto(const struct sk_buff *skb) { if (vlan_tx_tag_present(skb)) @@ -639,8 +648,7 @@ static unsigned int br_nf_pre_routing(unsigned int hook, struct sk_buff *skb, return NF_DROP; br = p->br; - if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) || - IS_PPPOE_IPV6(skb)) { + if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb)) { if (!brnf_call_ip6tables && !br->nf_call_ip6tables) return NF_ACCEPT; @@ -651,8 +659,7 @@ static unsigned int br_nf_pre_routing(unsigned int hook, struct sk_buff *skb, if (!brnf_call_iptables && !br->nf_call_iptables) return NF_ACCEPT; - if (skb->protocol != htons(ETH_P_IP) && !IS_VLAN_IP(skb) && - !IS_PPPOE_IP(skb)) + if (!IS_IP(skb) && !IS_VLAN_IP(skb) && !IS_PPPOE_IP(skb)) return NF_ACCEPT; nf_bridge_pull_encap_header_rcsum(skb); @@ -701,7 +708,7 @@ static int br_nf_forward_finish(struct sk_buff *skb) struct nf_bridge_info *nf_bridge = skb->nf_bridge; struct net_device *in; - if (skb->protocol != htons(ETH_P_ARP) && !IS_VLAN_ARP(skb)) { + if (!IS_ARP(skb) && !IS_VLAN_ARP(skb)) { in = nf_bridge->physindev; if (nf_bridge->mask & BRNF_PKT_TYPE) { skb->pkt_type = PACKET_OTHERHOST; @@ -718,6 +725,7 @@ static int br_nf_forward_finish(struct sk_buff *skb) return 0; } + /* This is the 'purely bridged' case. For IP, we pass the packet to * netfilter with indev and outdev set to the bridge device, * but we are still able to filter on the 'real' indev/outdev @@ -744,11 +752,9 @@ static unsigned int br_nf_forward_ip(unsigned int hook, struct sk_buff *skb, if (!parent) return NF_DROP; - if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) || - IS_PPPOE_IP(skb)) + if (IS_IP(skb) || IS_VLAN_IP(skb) || IS_PPPOE_IP(skb)) pf = PF_INET; - else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) || - IS_PPPOE_IPV6(skb)) + else if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb)) pf = PF_INET6; else return NF_ACCEPT; @@ -795,7 +801,7 @@ static unsigned int br_nf_forward_arp(unsigned int hook, struct sk_buff *skb, if (!brnf_call_arptables && !br->nf_call_arptables) return NF_ACCEPT; - if (skb->protocol != htons(ETH_P_ARP)) { + if (!IS_ARP(skb)) { if (!IS_VLAN_ARP(skb)) return NF_ACCEPT; nf_bridge_pull_encap_header(skb); @@ -853,11 +859,9 @@ static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff *skb, if (!realoutdev) return NF_DROP; - if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) || - IS_PPPOE_IP(skb)) + if (IS_IP(skb) || IS_VLAN_IP(skb) || IS_PPPOE_IP(skb)) pf = PF_INET; - else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) || - IS_PPPOE_IPV6(skb)) + else if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb)) pf = PF_INET6; else return NF_ACCEPT; -- cgit v1.2.1 From 741385119706d4370eb7899c5ca96ad125c520e5 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 6 Mar 2012 01:22:55 +0000 Subject: netfilter: nf_conntrack: fix early_drop with reliable event delivery If reliable event delivery is enabled and ctnetlink fails to deliver the destroy event in early_drop, the conntrack subsystem cannot drop any the candidate flow that was planned to be evicted. Reported-by: Kerin Millar Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index ed86a3be678e..fa4b82c8ae80 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -635,8 +635,12 @@ static noinline int early_drop(struct net *net, unsigned int hash) if (del_timer(&ct->timeout)) { death_by_timeout((unsigned long)ct); - dropped = 1; - NF_CT_STAT_INC_ATOMIC(net, early_drop); + /* Check if we indeed killed this entry. Reliable event + delivery may have inserted it into the dying list. */ + if (test_bit(IPS_DYING_BIT, &ct->status)) { + dropped = 1; + NF_CT_STAT_INC_ATOMIC(net, early_drop); + } } nf_ct_put(ct); return dropped; -- cgit v1.2.1 From 1d4526e037ad9788b5d164862d629fa7c4c5f27b Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Tue, 6 Mar 2012 03:05:14 +0000 Subject: mlx4_core: remove buggy sched_queue masking Fixes a bug introduced by commit fe9a2603c, where the priority bits in the schedule queue field were masked out. Signed-off-by: Amir Vadai Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/qp.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index 738f950a1ce5..fb2b36759cbf 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -151,11 +151,6 @@ static int __mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt, context->log_page_size = mtt->page_shift - MLX4_ICM_PAGE_SHIFT; } - port = ((context->pri_path.sched_queue >> 6) & 1) + 1; - if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH) - context->pri_path.sched_queue = (context->pri_path.sched_queue & - 0xc3); - *(__be32 *) mailbox->buf = cpu_to_be32(optpar); memcpy(mailbox->buf + 8, context, sizeof *context); -- cgit v1.2.1 From e48f814e6366d36a0495f6aa2838a064304f6406 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 6 Mar 2012 11:49:22 -0800 Subject: ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected Otherwise we get the following warning: arch/arm/mach-omap2/io.c:53:24: warning: 'omap24xx_io_desc' defined but not used [-Wunused-variable] Reported-by: Russell King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 9bd07f33eea7..3fbb0c0b84a4 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -49,7 +49,7 @@ * default mapping provided here. */ -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) static struct map_desc omap24xx_io_desc[] __initdata = { { .virtual = L3_24XX_VIRT, -- cgit v1.2.1 From 49b87c6db100cf9802be22a1b83a72cbcadaa76c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 6 Mar 2012 11:49:28 -0800 Subject: ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set Otherwise we get: arch/arm/mach-omap2/board-n8x0.c:39:12: warning: 'slot1_cover_open' defined but not used [-Wunused-variable] arch/arm/mach-omap2/board-n8x0.c:40:12: warning: 'slot2_cover_open' defined but not used [-Wunused-variable] arch/arm/mach-omap2/board-n8x0.c:41:23: warning: 'mmc_device' defined but not used [-Wunused-variable] Reported-by: Russell King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-n8x0.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad23..6bb67461a11c 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -36,10 +36,6 @@ #include "mux.h" -static int slot1_cover_open; -static int slot2_cover_open; -static struct device *mmc_device; - #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 #define TUSB6010_GPIO_INT 58 @@ -211,6 +207,10 @@ static struct omap_onenand_platform_data board_onenand_data[] = { #define N810_EMMC_VSD_GPIO 23 #define N810_EMMC_VIO_GPIO 9 +static int slot1_cover_open; +static int slot2_cover_open; +static struct device *mmc_device; + static int n8x0_mmc_switch_slot(struct device *dev, int slot) { #ifdef CONFIG_MMC_DEBUG -- cgit v1.2.1 From 1f3b372b3c1018fad960015cbfdf8de9251d14db Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 6 Mar 2012 11:38:01 -0800 Subject: ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices() Fix the below warning by making omap2_init_processor_devices() __init. It is called by an __init function and calls only __init functions, so it should also be init. WARNING: arch/arm/mach-omap2/built-in.o(.text+0x183c): Section mismatch in reference from the function omap2_init_processor_devices() to the function .init.text:_init_omap_device() The function omap2_init_processor_devices() references the function __init _init_omap_device(). This is often because omap2_init_processor_devices lacks a __init annotation or the annotation of _init_omap_device is wrong. Reported-by: Russell King Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe915149..d00c39eefb1e 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -49,7 +49,7 @@ static int _init_omap_device(char *name) /* * Build omap_devices for processors and bus. */ -static void omap2_init_processor_devices(void) +static void __init omap2_init_processor_devices(void) { _init_omap_device("mpu"); if (omap3_has_iva()) -- cgit v1.2.1 From f637d577cfe7b9fabf09a7e6a3c59f62b3225cd5 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Mon, 5 Mar 2012 22:56:36 +0000 Subject: cxgb4: Add support for Chelsio's T480-CR and T440-LP-CR adapters This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index e83d12c7bf20..9d76e59d9526 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -196,6 +196,8 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { CH_DEVICE(0x4408, 4), CH_DEVICE(0x4409, 4), CH_DEVICE(0x440a, 4), + CH_DEVICE(0x440d, 4), + CH_DEVICE(0x440e, 4), { 0, } }; -- cgit v1.2.1 From 79421b4eaef12f0ce392ed5229aff6401ed4196c Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Mon, 5 Mar 2012 22:56:37 +0000 Subject: cxgb4vf: Add support for Chelsio's T480-CR and T440-LP-CR adapters This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index e53365a71484..d963c1d57f71 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -2892,6 +2892,8 @@ static struct pci_device_id cxgb4vf_pci_tbl[] = { CH_DEVICE(0x4808, 0), /* T420-cx */ CH_DEVICE(0x4809, 0), /* T420-bt */ CH_DEVICE(0x480a, 0), /* T404-bt */ + CH_DEVICE(0x480d, 0), /* T480-cr */ + CH_DEVICE(0x480e, 0), /* T440-lp-cr */ { 0, } }; -- cgit v1.2.1 From bb1dbe7cfd62e35f6f25e94729458b9047e3f555 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 6 Mar 2012 12:00:25 -0800 Subject: ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled When CONFIG_HOTPLUG_CPU=n, there are unused functions in wakeupgen: arch/arm/mach-omap2/omap-wakeupgen.c:181: warning: 'wakeupgen_irqmask_all' defined but not used Fix this by moving all the functions only used when CONFIG_HOTPLUG_CPU=y together and wrapping in an #ifdef. No functional changes. Reported-by: Russell King Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-wakeupgen.c | 53 +++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 25 deletions(-) diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index d3d8971d7f30..42cd7fb52414 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -43,7 +43,6 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; -static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); static DEFINE_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[NR_IRQS]; @@ -67,14 +66,6 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx) __raw_writel(val, sar_base + offset + (idx * 4)); } -static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - wakeupgen_writel(reg, i, cpu); -} - static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) { unsigned int spi_irq; @@ -130,22 +121,6 @@ static void _wakeupgen_set(unsigned int irq, unsigned int cpu) wakeupgen_writel(val, i, cpu); } -static void _wakeupgen_save_masks(unsigned int cpu) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); -} - -static void _wakeupgen_restore_masks(unsigned int cpu) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); -} - /* * Architecture specific Mask extension */ @@ -170,6 +145,33 @@ static void wakeupgen_unmask(struct irq_data *d) spin_unlock_irqrestore(&wakeupgen_lock, flags); } +#ifdef CONFIG_HOTPLUG_CPU +static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); + +static void _wakeupgen_save_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); +} + +static void _wakeupgen_restore_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); +} + +static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(reg, i, cpu); +} + /* * Mask or unmask all interrupts on given CPU. * 0 = Mask all interrupts on the 'cpu' @@ -191,6 +193,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) } spin_unlock_irqrestore(&wakeupgen_lock, flags); } +#endif #ifdef CONFIG_CPU_PM /* -- cgit v1.2.1 From 34efc283a56adaef5756ac93065f46608674ea7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sjur=20Br=C3=A6ndeland?= Date: Sun, 4 Mar 2012 08:38:58 +0000 Subject: caif-hsi: Set default MTU to 4096 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Default MTU for CAIF HSI was wrongly set to 15 * 4092 bytes. The patch sets default MTU size to 4096. Signed-off-by: Sjur Brændeland Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 0a4fc62a381d..c998e1afebc6 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -978,7 +978,7 @@ static void cfhsi_setup(struct net_device *dev) dev->netdev_ops = &cfhsi_ops; dev->type = ARPHRD_CAIF; dev->flags = IFF_POINTOPOINT | IFF_NOARP; - dev->mtu = CFHSI_MAX_PAYLOAD_SZ; + dev->mtu = CFHSI_MAX_CAIF_FRAME_SZ; dev->tx_queue_len = 0; dev->destructor = free_netdev; skb_queue_head_init(&cfhsi->qhead); -- cgit v1.2.1 From ce8fea7aa4ad9e3b40999a08622ef27c77159659 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 6 Mar 2012 12:28:52 -0800 Subject: mmap: EINVAL not ENOMEM when rejecting VM_GROWS Currently error is -ENOMEM when rejecting VM_GROWSDOWN|VM_GROWSUP from shared anonymous: hoist the file case's -EINVAL up for both. Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/mmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index 22e1a0b2f70c..09ce2cae07ca 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1266,8 +1266,9 @@ munmap_back: vma->vm_pgoff = pgoff; INIT_LIST_HEAD(&vma->anon_vma_chain); + error = -EINVAL; /* when rejecting VM_GROWSDOWN|VM_GROWSUP */ + if (file) { - error = -EINVAL; if (vm_flags & (VM_GROWSDOWN|VM_GROWSUP)) goto free_vma; if (vm_flags & VM_DENYWRITE) { -- cgit v1.2.1 From d6ddef9e641d1229d4ec841dc75ae703171c3e92 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Mon, 5 Mar 2012 14:45:17 +0000 Subject: IPv6: Fix not join all-router mcast group when forwarding set. When forwarding was set and a new net device is register, we need add this device to the all-router mcast group. Signed-off-by: Li Wei Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index c02280a4d126..6b8ebc5da0e1 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -434,6 +434,10 @@ static struct inet6_dev * ipv6_add_dev(struct net_device *dev) /* Join all-node multicast group */ ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes); + /* Join all-router multicast group if forwarding is set */ + if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST)) + ipv6_dev_mc_inc(dev, &in6addr_linklocal_allrouters); + return ndev; } -- cgit v1.2.1 From 651a68ea2ce9738b84e928836053b2e0fb5db2ba Mon Sep 17 00:00:00 2001 From: Ben Pfaff Date: Tue, 6 Mar 2012 15:04:04 -0800 Subject: openvswitch: Honor dp_ifindex, when specified, for vport lookup by name. When OVS_VPORT_ATTR_NAME is specified and dp_ifindex is nonzero, the logical behavior would be for the vport name lookup scope to be limited to the specified datapath, but in fact the dp_ifindex value was ignored. This commit causes the search scope to be honored. Signed-off-by: Ben Pfaff Signed-off-by: Jesse Gross --- net/openvswitch/datapath.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index ce64c18b8c79..2c030505b335 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -1521,6 +1521,9 @@ static struct vport *lookup_vport(struct ovs_header *ovs_header, vport = ovs_vport_locate(nla_data(a[OVS_VPORT_ATTR_NAME])); if (!vport) return ERR_PTR(-ENODEV); + if (ovs_header->dp_ifindex && + ovs_header->dp_ifindex != get_dpifindex(vport->dp)) + return ERR_PTR(-ENODEV); return vport; } else if (a[OVS_VPORT_ATTR_PORT_NO]) { u32 port_no = nla_get_u32(a[OVS_VPORT_ATTR_PORT_NO]); -- cgit v1.2.1 From 3223d007a3f9ddbd68424adf628e740dd87c564f Mon Sep 17 00:00:00 2001 From: Yuan Jiangli Date: Tue, 6 Mar 2012 12:51:12 -0600 Subject: ARM: OMAP3+: PM: VP: fix integer truncation error commit 2f34ce81b8c05c900e45bd88595cc154f7bb5957 (OMAP3: PM: Adding voltage driver support.) introduced runtime computation of waittime to handle all potential sys clocks available. In the voltage processor, the SPMSUpdateWait is calculated based on the slew rate and the voltage step (SMPSUpdateWait = slew rate * Voltage Step). After the voltage processor receives the SMPS_Ack signal, the Voltage Controller will wait for SMPSUpdateWait clock cycles for the voltage to settle to the new value. For all practical purposes, the waittime parameter is the OMAP hardware translation of what the slew rate on the PMIC is. As an example, with TPS62361 on OMAP4460, step_size = 10000 slew_rate = 32000 sys_clk_rate = 38400 Our current computation results in the following: = ((step_size / slew_rate) * sys_clk_rate) / 1000 = ((10000 / 32000) * 38400 / 1000 = 0 Fix the same using DIV_ROUND_UP as an extra wait clock cycle is better than lesser clock cycle. For the above example, this translates to: = (10000 * 38400) / (1000 * 32000) = 12 Acked-by: Jon Hunter [nm@ti.com: slightly better implementation] Signed-off-by: Nishanth Menon Signed-off-by: Yuan Jiangli Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/vp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 0df88820978d..f95c1bad9dc6 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -61,8 +61,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm) vddmin = voltdm->pmic->vp_vddmin; vddmax = voltdm->pmic->vp_vddmax; - waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * - sys_clk_rate) / 1000; + waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate, + 1000 * voltdm->pmic->slew_rate); vstepmin = voltdm->pmic->vp_vstepmin; vstepmax = voltdm->pmic->vp_vstepmax; -- cgit v1.2.1 From 52abb700e16a9aa4cbc03f3d7f80206cbbc80680 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 6 Mar 2012 23:18:54 +0100 Subject: genirq: Clear action->thread_mask if IRQ_ONESHOT is not set Xommit ac5637611(genirq: Unmask oneshot irqs when thread was not woken) fails to unmask when a !IRQ_ONESHOT threaded handler is handled by handle_level_irq. This happens because thread_mask is or'ed unconditionally in irq_wake_thread(), but for !IRQ_ONESHOT interrupts never cleared. So the check for !desc->thread_active fails and keeps the interrupt disabled. Keep the thread_mask zero for !IRQ_ONESHOT interrupts. Document the thread_mask magic while at it. Reported-and-tested-by: Sven Joachim Reported-and-tested-by: Stefan Lippers-Hollmann Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- kernel/irq/manage.c | 44 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 6 deletions(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 32313c084442..0f0d4704ddd8 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -985,6 +985,11 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) /* add new interrupt at end of irq queue */ do { + /* + * Or all existing action->thread_mask bits, + * so we can find the next zero bit for this + * new action. + */ thread_mask |= old->thread_mask; old_ptr = &old->next; old = *old_ptr; @@ -993,14 +998,41 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) } /* - * Setup the thread mask for this irqaction. Unlikely to have - * 32 resp 64 irqs sharing one line, but who knows. + * Setup the thread mask for this irqaction for ONESHOT. For + * !ONESHOT irqs the thread mask is 0 so we can avoid a + * conditional in irq_wake_thread(). */ - if (new->flags & IRQF_ONESHOT && thread_mask == ~0UL) { - ret = -EBUSY; - goto out_mask; + if (new->flags & IRQF_ONESHOT) { + /* + * Unlikely to have 32 resp 64 irqs sharing one line, + * but who knows. + */ + if (thread_mask == ~0UL) { + ret = -EBUSY; + goto out_mask; + } + /* + * The thread_mask for the action is or'ed to + * desc->thread_active to indicate that the + * IRQF_ONESHOT thread handler has been woken, but not + * yet finished. The bit is cleared when a thread + * completes. When all threads of a shared interrupt + * line have completed desc->threads_active becomes + * zero and the interrupt line is unmasked. See + * handle.c:irq_wake_thread() for further information. + * + * If no thread is woken by primary (hard irq context) + * interrupt handlers, then desc->threads_active is + * also checked for zero to unmask the irq line in the + * affected hard irq flow handlers + * (handle_[fasteoi|level]_irq). + * + * The new action gets the first zero bit of + * thread_mask assigned. See the loop above which or's + * all existing action->thread_mask bits. + */ + new->thread_mask = 1 << ffz(thread_mask); } - new->thread_mask = 1 << ffz(thread_mask); if (!shared) { init_waitqueue_head(&desc->wait_for_threads); -- cgit v1.2.1 From 83cd904d271ba960c53f3adbb037f3486518f1e6 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 4 Mar 2012 19:52:03 -0500 Subject: mm: fix find_vma_prev Commit 6bd4837de96e ("mm: simplify find_vma_prev()") broke memory management on PA-RISC. After application of the patch, programs that allocate big arrays on the stack crash with segfault, for example, this will crash if compiled without optimization: int main() { char array[200000]; array[199999] = 0; return 0; } The reason is that PA-RISC has up-growing stack and the stack is usually the last memory area. In the above example, a page fault happens above the stack. Previously, if we passed too high address to find_vma_prev, it returned NULL and stored the last VMA in *pprev. After "simplify find_vma_prev" change, it stores NULL in *pprev. Consequently, the stack area is not found and it is not expanded, as it used to be before the change. This patch restores the old behavior and makes it return the last VMA in *pprev if the requested address is higher than address of any other VMA. Signed-off-by: Mikulas Patocka Acked-by: KOSAKI Motohiro Signed-off-by: Linus Torvalds --- mm/mmap.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index 09ce2cae07ca..da15a79b1441 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1608,7 +1608,6 @@ EXPORT_SYMBOL(find_vma); /* * Same as find_vma, but also return a pointer to the previous VMA in *pprev. - * Note: pprev is set to NULL when return value is NULL. */ struct vm_area_struct * find_vma_prev(struct mm_struct *mm, unsigned long addr, @@ -1617,7 +1616,16 @@ find_vma_prev(struct mm_struct *mm, unsigned long addr, struct vm_area_struct *vma; vma = find_vma(mm, addr); - *pprev = vma ? vma->vm_prev : NULL; + if (vma) { + *pprev = vma->vm_prev; + } else { + struct rb_node *rb_node = mm->mm_rb.rb_node; + *pprev = NULL; + while (rb_node) { + *pprev = rb_entry(rb_node, struct vm_area_struct, vm_rb); + rb_node = rb_node->rb_right; + } + } return vma; } -- cgit v1.2.1 From 097d59106a8e4b42d07c9892fdd7790f1659c6ff Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 6 Mar 2012 18:23:36 -0800 Subject: vm: avoid using find_vma_prev() unnecessarily Several users of "find_vma_prev()" were not in fact interested in the previous vma if there was no primary vma to be found either. And in those cases, we're much better off just using the regular "find_vma()", and then "prev" can be looked up by just checking vma->vm_prev. The find_vma_prev() semantics are fairly subtle (see Mikulas' recent commit 83cd904d271b: "mm: fix find_vma_prev"), and the whole "return prev by reference" means that it generates worse code too. Thus this "let's avoid using this inconvenient and clearly too subtle interface when we don't really have to" patch. Cc: Mikulas Patocka Cc: KOSAKI Motohiro Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 4 +++- mm/mempolicy.c | 3 ++- mm/mlock.c | 3 ++- mm/mprotect.c | 3 ++- 4 files changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f581a18c0d4d..83e7141c3982 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -333,13 +333,15 @@ try_again: * Lookup failure means no vma is above this address, * i.e. return with success: */ - if (!(vma = find_vma_prev(mm, addr, &prev_vma))) + vma = find_vma(mm, add); + if (!vma) return addr; /* * new region fits between prev_vma->vm_end and * vma->vm_start, use it: */ + prev_vma = vma->vm_prev; if (addr + len <= vma->vm_start && (!prev_vma || (addr >= prev_vma->vm_end))) { /* remember the address as a hint for next time */ diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 06b145fb64ab..47296fee23db 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -640,10 +640,11 @@ static int mbind_range(struct mm_struct *mm, unsigned long start, unsigned long vmstart; unsigned long vmend; - vma = find_vma_prev(mm, start, &prev); + vma = find_vma(mm, start); if (!vma || vma->vm_start > start) return -EFAULT; + prev = vma->vm_prev; if (start > vma->vm_start) prev = vma; diff --git a/mm/mlock.c b/mm/mlock.c index 4f4f53bdc65d..ef726e8aa8e9 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -385,10 +385,11 @@ static int do_mlock(unsigned long start, size_t len, int on) return -EINVAL; if (end == start) return 0; - vma = find_vma_prev(current->mm, start, &prev); + vma = find_vma(current->mm, start); if (!vma || vma->vm_start > start) return -ENOMEM; + prev = vma->vm_prev; if (start > vma->vm_start) prev = vma; diff --git a/mm/mprotect.c b/mm/mprotect.c index 5a688a2756be..f437d054c3bf 100644 --- a/mm/mprotect.c +++ b/mm/mprotect.c @@ -262,10 +262,11 @@ SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len, down_write(¤t->mm->mmap_sem); - vma = find_vma_prev(current->mm, start, &prev); + vma = find_vma(current->mm, start); error = -ENOMEM; if (!vma) goto out; + prev = vma->vm_prev; if (unlikely(grows & PROT_GROWSDOWN)) { if (vma->vm_start >= end) goto out; -- cgit v1.2.1 From bb60424af517d6e6148505fb5ef256caa91b5b43 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 1 Mar 2012 12:30:42 -0800 Subject: ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance commit e4b0b2cbbb (ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators) added regulators which are registered during gpmc_smsc911x_init(). However, some platforms (OMAP3/Overo) have more than one instance of the SMSC911x and result in attempting to register the same regulator more than once which causes a panic(). Fix this by only registering the regulator when the platform_data id field is zero, indicating its the first instance. Cc: Matt Porter Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-smsc911x.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index bbb870c04a5e..5e5880d6d099 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -101,10 +101,13 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; - ret = platform_device_register(&gpmc_smsc911x_regulator); - if (ret < 0) { - pr_err("Unable to register smsc911x regulators: %d\n", ret); - return; + if (!gpmc_cfg->id) { + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", + ret); + return; + } } if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { -- cgit v1.2.1 From 55062d061790b43aee01ab3f9ac57b8596254f19 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 6 Mar 2012 18:48:13 -0800 Subject: x86: fix typo in recent find_vma_prev purge It turns out that test-compiling this file on x86-64 doesn't really help, because much of it is x86-32-specific. And so I hadn't noticed the slightly over-eager removal of the 'r' from 'addr' variable despite thinking I had tested it. Signed-off-by: Linus "oopsie" Torvalds --- arch/x86/mm/hugetlbpage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 83e7141c3982..8ecbb4bba4b3 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -333,7 +333,7 @@ try_again: * Lookup failure means no vma is above this address, * i.e. return with success: */ - vma = find_vma(mm, add); + vma = find_vma(mm, addr); if (!vma) return addr; -- cgit v1.2.1 From 526af6eb4dc71302f59806e2ccac7793963a7fe0 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 7 Mar 2012 08:25:20 +0100 Subject: ALSA: hda/realtek - Apply the coef-setup only to ALC269VB The coef setup in alc269_fill_coef() was designed only for ALC269VB model, and this has some bad effects for other ALC269 variants, such as turning off the external mic input. Apply it only to ALC269VB. Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5e530205bba4..22c73b78ac6f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2068,12 +2068,16 @@ static int alc_build_controls(struct hda_codec *codec) */ static void alc_init_special_input_src(struct hda_codec *codec); +static int alc269_fill_coef(struct hda_codec *codec); static int alc_init(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; unsigned int i; + if (codec->vendor_id == 0x10ec0269) + alc269_fill_coef(codec); + alc_fix_pll(codec); alc_auto_init_amp(codec, spec->init_amp); @@ -5476,8 +5480,12 @@ static const struct alc_model_fixup alc269_fixup_models[] = { static int alc269_fill_coef(struct hda_codec *codec) { + struct alc_spec *spec = codec->spec; int val; + if (spec->codec_variant != ALC269_TYPE_ALC269VB) + return 0; + if ((alc_get_coef0(codec) & 0x00ff) < 0x015) { alc_write_coef_idx(codec, 0xf, 0x960b); alc_write_coef_idx(codec, 0xe, 0x8817); -- cgit v1.2.1 From 19d57d3a145e94349abf805eed2316ef720d86c2 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Tue, 6 Mar 2012 10:19:19 -0800 Subject: Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use The message count field uses three bits of storage, not two. Signed-off-by: Jason Gerecke Acked-by: Chris Bagwell Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 88672ec296c1..cd3ed29e0801 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -926,7 +926,7 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned char *data = wacom->data; - int count = data[1] & 0x03; + int count = data[1] & 0x07; int i; if (data[0] != 0x02) -- cgit v1.2.1 From 5727347180ebc6b4a866fcbe00dcb39cc03acb37 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 6 Mar 2012 17:33:17 +0100 Subject: ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode On ARM, the PMU does not stop counting after an overflow and therefore IRQ latency affects the new counter value read by the kernel. This is significant for non-sampling runs where it is possible for the new value to overtake the previous one, causing the delta to be out by up to max_period events. Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency") attempted to fix this problem by allowing interrupt handlers to pass an overflow flag to the event update function, causing the overflow calculation to assume that the counter passed through zero when going from prev to new. Unfortunately, this doesn't work when overflow occurs on the perf_task_tick path because we have the flag cleared and end up computing a large negative delta. This patch removes the overflow flag from armpmu_event_update and instead limits the sample_period to half of the max_period for non-sampling profiling runs. Cc: Signed-off-by: Ming Lei Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pmu.h | 2 +- arch/arm/kernel/perf_event.c | 22 +++++++++++----------- arch/arm/kernel/perf_event_v6.c | 2 +- arch/arm/kernel/perf_event_v7.c | 2 +- arch/arm/kernel/perf_event_xscale.c | 4 ++-- 5 files changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index b5a5be2536c1..90114faa9f3c 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow); + int idx); int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5bb91bf3d47f..56173ae16448 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event, u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow) + int idx) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); u64 delta, prev_raw_count, new_raw_count; @@ -193,13 +193,7 @@ again: new_raw_count) != prev_raw_count) goto again; - new_raw_count &= armpmu->max_period; - prev_raw_count &= armpmu->max_period; - - if (overflow) - delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; - else - delta = new_raw_count - prev_raw_count; + delta = (new_raw_count - prev_raw_count) & armpmu->max_period; local64_add(delta, &event->count); local64_sub(delta, &hwc->period_left); @@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); } static void @@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags) if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } @@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event) hwc->config_base |= (unsigned long)mapping; if (!hwc->sample_period) { - hwc->sample_period = armpmu->max_period; + /* + * For non-sampling runs, limit the sample_period to half + * of the counter width. That way, the new counter value + * is far less likely to overtake the previous one unless + * you have some serious IRQ latency issues. + */ + hwc->sample_period = armpmu->max_period >> 1; hwc->last_period = hwc->sample_period; local64_set(&hwc->period_left, hwc->sample_period); } diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 533be9930ec2..88bf15253fbd 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -524,7 +524,7 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 6933244c68f9..6f488610f8fc 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -963,7 +963,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 3b99d8269829..831e019b017c 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -259,7 +259,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -596,7 +596,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; -- cgit v1.2.1 From 99c1745b9c76910e195889044f914b4898b7c9a5 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 6 Mar 2012 17:34:22 +0100 Subject: ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU When disabling a counter on an ARMv7 PMU, we should also clear the overflow flag in case an overflow occurred whilst stopping the counter. This prevents a spurious overflow being picked up later and leading to either false accounting or a NULL dereference. Cc: Reported-by: Ming Lei Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event_v7.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 6f488610f8fc..050cc8bf7246 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx) counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); + isb(); + /* Clear the overflow flag in case an interrupt is pending. */ + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter))); + isb(); + return idx; } -- cgit v1.2.1 From f6f5a30c834135c9f2fa10400c59ebbdd9188567 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 6 Mar 2012 17:34:50 +0100 Subject: ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers The PMU IRQ handlers in perf assume that if a counter has overflowed then perf must be responsible. In the paranoid world of crazy hardware, this could be false, so check that we do have a valid event before attempting to dereference NULL in the interrupt path. Cc: Signed-off-by: Ming Lei Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event_v6.c | 20 ++------------------ arch/arm/kernel/perf_event_v7.c | 4 ++++ arch/arm/kernel/perf_event_xscale.c | 6 ++++++ 3 files changed, 12 insertions(+), 18 deletions(-) diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 88bf15253fbd..b78af0cc6ef3 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static int counter_is_active(unsigned long pmcr, int idx) -{ - unsigned long mask = 0; - if (idx == ARMV6_CYCLE_COUNTER) - mask = ARMV6_PMCR_CCOUNT_IEN; - else if (idx == ARMV6_COUNTER0) - mask = ARMV6_PMCR_COUNT0_IEN; - else if (idx == ARMV6_COUNTER1) - mask = ARMV6_PMCR_COUNT1_IEN; - - if (mask) - return pmcr & mask; - - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return 0; -} - static irqreturn_t armv6pmu_handle_irq(int irq_num, void *dev) @@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num, struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!counter_is_active(pmcr, idx)) + /* Ignore if we don't have an event. */ + if (!event) continue; /* diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 050cc8bf7246..4d7095af2ab3 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -960,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + /* Ignore if we don't have an event. */ + if (!event) + continue; + /* * We have a single interrupt for all counters. Check that * each counter has overflowed before we process it. diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 831e019b017c..a5bbd360cc4b 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -255,6 +255,9 @@ xscale1pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + if (!event) + continue; + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) continue; @@ -592,6 +595,9 @@ xscale2pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + if (!event) + continue; + if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) continue; -- cgit v1.2.1 From 3f31ae121348afd9ed39700ea2a63c17cd7eeed1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 6 Mar 2012 17:35:55 +0100 Subject: ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs xscale2 PMUs indicate overflow not via the PMU control register, but by a separate overflow FLAG register instead. This patch fixes the xscale2 PMU code to use this register to detect to overflow and ensures that we clear any pending overflow when disabling a counter. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event_xscale.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index a5bbd360cc4b..71a21e6712f5 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -598,7 +598,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) if (!event) continue; - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx)) continue; hwc = &event->hw; @@ -669,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) static void xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) { - unsigned long flags, ien, evtsel; + unsigned long flags, ien, evtsel, of_flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); @@ -678,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) switch (idx) { case XSCALE_CYCLE_COUNTER: ien &= ~XSCALE2_CCOUNT_INT_EN; + of_flags = XSCALE2_CCOUNT_OVERFLOW; break; case XSCALE_COUNTER0: ien &= ~XSCALE2_COUNT0_INT_EN; evtsel &= ~XSCALE2_COUNT0_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + of_flags = XSCALE2_COUNT0_OVERFLOW; break; case XSCALE_COUNTER1: ien &= ~XSCALE2_COUNT1_INT_EN; evtsel &= ~XSCALE2_COUNT1_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + of_flags = XSCALE2_COUNT1_OVERFLOW; break; case XSCALE_COUNTER2: ien &= ~XSCALE2_COUNT2_INT_EN; evtsel &= ~XSCALE2_COUNT2_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + of_flags = XSCALE2_COUNT2_OVERFLOW; break; case XSCALE_COUNTER3: ien &= ~XSCALE2_COUNT3_INT_EN; evtsel &= ~XSCALE2_COUNT3_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + of_flags = XSCALE2_COUNT3_OVERFLOW; break; default: WARN_ONCE(1, "invalid counter number (%d)\n", idx); @@ -707,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); + xscale2pmu_write_overflow_flags(of_flags); raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -- cgit v1.2.1 From a0feb6db0fe03326d7d2c7a4615ce3289615c023 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 6 Mar 2012 17:37:45 +0100 Subject: ARM: 7358/1: perf: add PMU hotplug notifier When a CPU is taken out of reset, either cold booted or hotplugged in, some of its PMU registers can contain UNKNOWN values. This patch adds a hotplug notifier to ARM core perf code so that upon CPU restart the PMU unit is reset and becomes ready to use again. Signed-off-by: Lorenzo Pieralisi Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 56173ae16448..b2abfa18f137 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu) armpmu->type = ARM_PMU_DEVICE_CPU; } +/* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit pmu_cpu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata pmu_cpu_notifier = { + .notifier_call = pmu_cpu_notify, +}; + /* * CPU PMU identification and registration. */ @@ -730,6 +752,7 @@ init_hw_perf_events(void) pr_info("enabled with %s PMU driver, %d counters available\n", cpu_pmu->name, cpu_pmu->num_events); cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&pmu_cpu_notifier); armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); -- cgit v1.2.1 From 0be70439f2dcf4a2048e4b02f23f2c239b35a110 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Wed, 7 Mar 2012 11:28:57 +0100 Subject: drm/radeon: fix a semaphore deadlock on pre cayman asics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The out of order execution of semaphore commands on pre cayman asics doesn't work correctly and can cause deadlocks, so turn it off for now. Signed-off-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 3 +++ drivers/gpu/drm/radeon/r600d.h | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index fbcd84803b60..17ca72ce3027 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2362,6 +2362,9 @@ void r600_semaphore_ring_emit(struct radeon_device *rdev, uint64_t addr = semaphore->gpu_addr; unsigned sel = emit_wait ? PACKET3_SEM_SEL_WAIT : PACKET3_SEM_SEL_SIGNAL; + if (rdev->family < CHIP_CAYMAN) + sel |= PACKET3_SEM_WAIT_ON_SIGNAL; + radeon_ring_write(ring, PACKET3(PACKET3_MEM_SEMAPHORE, 1)); radeon_ring_write(ring, addr & 0xffffffff); radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel); diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 3ee1fd7ef394..9b23670716f1 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -831,6 +831,7 @@ #define PACKET3_STRMOUT_BUFFER_UPDATE 0x34 #define PACKET3_INDIRECT_BUFFER_MP 0x38 #define PACKET3_MEM_SEMAPHORE 0x39 +# define PACKET3_SEM_WAIT_ON_SIGNAL (0x1 << 12) # define PACKET3_SEM_SEL_SIGNAL (0x6 << 29) # define PACKET3_SEM_SEL_WAIT (0x7 << 29) #define PACKET3_MPEG_INDEX 0x3A -- cgit v1.2.1 From aaefcd4284a5399641ed02ac3e696b5e50ce185e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 6 Mar 2012 10:44:40 +0000 Subject: drm/radeon: deal with errors from framebuffer init path. We've been getting occasional oops running a 32-bit kernel on a certain system in our RHEL test hw. It appears that we fail to get sufficent ioremap space for the framebuffer, and this leads to an oops. This patch should fix the oops and leave a message in the logs we can check for. A future fix would probably to resize the console to a size that we can ioremap. Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 18 +++++++++++++++--- drivers/gpu/drm/radeon/radeon_fb.c | 11 ++++++++++- drivers/gpu/drm/radeon/radeon_mode.h | 2 +- 3 files changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8c49fef1ce78..3d314338d843 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -1078,15 +1078,21 @@ static const struct drm_framebuffer_funcs radeon_fb_funcs = { .create_handle = radeon_user_framebuffer_create_handle, }; -void +int radeon_framebuffer_init(struct drm_device *dev, struct radeon_framebuffer *rfb, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *obj) { + int ret; rfb->obj = obj; - drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs); + ret = drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs); + if (ret) { + rfb->obj = NULL; + return ret; + } drm_helper_mode_fill_fb_struct(&rfb->base, mode_cmd); + return 0; } static struct drm_framebuffer * @@ -1096,6 +1102,7 @@ radeon_user_framebuffer_create(struct drm_device *dev, { struct drm_gem_object *obj; struct radeon_framebuffer *radeon_fb; + int ret; obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]); if (obj == NULL) { @@ -1108,7 +1115,12 @@ radeon_user_framebuffer_create(struct drm_device *dev, if (radeon_fb == NULL) return ERR_PTR(-ENOMEM); - radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj); + ret = radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj); + if (ret) { + kfree(radeon_fb); + drm_gem_object_unreference_unlocked(obj); + return NULL; + } return &radeon_fb->base; } diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index cf2bf35b56b8..195471cf65d3 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -209,6 +209,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev, sizes->surface_depth); ret = radeonfb_create_pinned_object(rfbdev, &mode_cmd, &gobj); + if (ret) { + DRM_ERROR("failed to create fbcon object %d\n", ret); + return ret; + } + rbo = gem_to_radeon_bo(gobj); /* okay we have an object now allocate the framebuffer */ @@ -220,7 +225,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev, info->par = rfbdev; - radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj); + ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj); + if (ret) { + DRM_ERROR("failed to initalise framebuffer %d\n", ret); + goto out_unref; + } fb = &rfbdev->rfb.base; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 4330e3253573..8a85598fb242 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -649,7 +649,7 @@ extern void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, int regno); extern void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, int regno); -void radeon_framebuffer_init(struct drm_device *dev, +int radeon_framebuffer_init(struct drm_device *dev, struct radeon_framebuffer *rfb, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *obj); -- cgit v1.2.1 From 4293f20c19f44ca66e5ac836b411d25e14b9f185 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 7 Mar 2012 08:21:19 -0800 Subject: Revert "CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume" This reverts commit 8f2f748b0656257153bcf0941df8d6060acc5ca6. It causes some odd regression that we have not figured out, and it's too late in the -rc series to try to figure it out now. As reported by Konstantin Khlebnikov, it causes consistent hangs on his laptop (Thinkpad x220: 2x cores + HT). They can be avoided by adding calls to "rebuild_sched_domains();" in cpuset_cpu_[in]active() for the CPU_{ONLINE/DOWN_FAILED/DOWN_PREPARE}_FROZEN cases, but it's not at all clear why, and it makes no sense. Konstantin's config doesn't even have CONFIG_CPUSETS enabled, just to make things even more interesting. So it's not the cpusets, it's just the scheduling domains. So until this is understood, revert. Bisected-reported-and-tested-by: Konstantin Khlebnikov Acked-by: Peter Zijlstra Acked-by: Ingo Molnar Acked-by: Srivatsa S. Bhat Signed-off-by: Linus Torvalds --- kernel/sched/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 33a0676ea744..b342f57879e6 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6728,7 +6728,7 @@ int __init sched_create_sysfs_power_savings_entries(struct device *dev) static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action, void *hcpu) { - switch (action) { + switch (action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: case CPU_DOWN_FAILED: cpuset_update_active_cpus(); @@ -6741,7 +6741,7 @@ static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action, static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action, void *hcpu) { - switch (action) { + switch (action & ~CPU_TASKS_FROZEN) { case CPU_DOWN_PREPARE: cpuset_update_active_cpus(); return NOTIFY_OK; -- cgit v1.2.1 From 4cd7c0a03ea44ef88fa0d3901d671798d23cbc35 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 7 Mar 2012 11:19:31 -0500 Subject: C6X: fix KSTK_EIP and KSTK_ESP macros There was a latent typo in the C6X KSTK_EIP and KSTK_ESP macros which caused a problem with a new patch which used them. The broken definitions were of the form: #define KSTK_FOO(tsk) (task_pt_regs(task)->foo) Note the use of task vs tsk. This actually worked before because the only place in the kernel which used these macros passed in a local pointer named task. Signed-off-by: Mark Salter --- arch/c6x/include/asm/processor.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/c6x/include/asm/processor.h b/arch/c6x/include/asm/processor.h index 8154c4ee8c9c..77ecbded1f37 100644 --- a/arch/c6x/include/asm/processor.h +++ b/arch/c6x/include/asm/processor.h @@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); extern unsigned long get_wchan(struct task_struct *p); -#define KSTK_EIP(tsk) (task_pt_regs(task)->pc) -#define KSTK_ESP(tsk) (task_pt_regs(task)->sp) +#define KSTK_EIP(task) (task_pt_regs(task)->pc) +#define KSTK_ESP(task) (task_pt_regs(task)->sp) #define cpu_relax() do { } while (0) -- cgit v1.2.1 From 4de86126a712ba83fa038d277c8282f7ed466a4b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 5 Mar 2012 08:32:00 -0500 Subject: hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000 These are fully compatible with Jedec JC 42.4 as far as I can see. Signed-off-by: Jean Delvare Cc: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck --- Documentation/hwmon/jc42 | 6 ++++++ drivers/hwmon/Kconfig | 3 ++- drivers/hwmon/jc42.c | 10 ++++++++++ 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index a22ecf48f255..e7133750286f 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -48,6 +48,12 @@ Supported chips: Datasheets: http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf + * ST Microelectronics STTS2002, STTS3000 + Prefix: 'stts2002', 'stts3000' + Addresses scanned: I2C 0x18 - 0x1f + Datasheets: + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf * JEDEC JC 42.4 compliant temperature sensor chips Prefix: 'jc42' Addresses scanned: I2C 0x18 - 0x1f diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 02260406b9e4..91a51aff5363 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -498,7 +498,8 @@ config SENSORS_JC42 temperature sensors, which are used on many DDR3 memory modules for mobile devices and servers. Support will include, but not be limited to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, - MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3. + MCP9843, SE97, SE98, STTS424(E), STTS2002, STTS3000, TSE2002B3, and + TS3000B3. This driver can also be built as a module. If so, the module will be called jc42. diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 28c09eead36b..08430ecb306a 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -113,6 +113,12 @@ static const unsigned short normal_i2c[] = { #define STTS424E_DEVID 0x0000 #define STTS424E_DEVID_MASK 0xfffe +#define STTS2002_DEVID 0x0300 +#define STTS2002_DEVID_MASK 0xffff + +#define STTS3000_DEVID 0x0200 +#define STTS3000_DEVID_MASK 0xffff + static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 }; struct jc42_chips { @@ -133,6 +139,8 @@ static struct jc42_chips jc42_chips[] = { { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK }, { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK }, { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK }, + { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK }, + { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; /* Each client has this additional data */ @@ -171,6 +179,8 @@ static const struct i2c_device_id jc42_id[] = { { "se97b", 0 }, { "se98", 0 }, { "stts424", 0 }, + { "stts2002", 0 }, + { "stts3000", 0 }, { "tse2002b3", 0 }, { "ts3000b3", 0 }, { } -- cgit v1.2.1 From 7cb3c44fb1f7999e4c53b6a52de6bc25da6de079 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 4 Mar 2012 08:10:57 -0800 Subject: hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes There are up to three POUT alarm attributes, not two, since cap_alarm was added. Reported-by: Michele Petracca Cc: stable@vger.kernel.org # 3.0+ [3.0 will need backport] Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 00460d8d8423..d89b33967a85 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -54,7 +54,8 @@ lcrit_alarm, crit_alarm */ #define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm, crit_alarm */ -#define PMBUS_POUT_BOOLEANS_PER_PAGE 2 /* alarm, crit_alarm */ +#define PMBUS_POUT_BOOLEANS_PER_PAGE 3 /* cap_alarm, alarm, crit_alarm + */ #define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */ #define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm, lcrit_alarm, crit_alarm */ -- cgit v1.2.1 From 7ad6307ad6968ce25cecf209d4822d4c722be030 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 7 Mar 2012 03:58:55 -0800 Subject: hwmon: (zl6100) Maintain delay parameter in driver instance data A global delay parameter has the side effect of being overwritten with 0 if a single ZL2004 or ZL6105 is instantiated. If other chips supported by the same driver are in the system, this will result in access errors for those chips. To solve the problem, keep a per-instance copy of the delay parameter, and do not change the original parameter. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.1+ Acked-by: Jean Delvare --- drivers/hwmon/pmbus/zl6100.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c index 48c7b4a716ae..880b90cf4d32 100644 --- a/drivers/hwmon/pmbus/zl6100.c +++ b/drivers/hwmon/pmbus/zl6100.c @@ -33,6 +33,7 @@ enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 }; struct zl6100_data { int id; ktime_t access; /* chip access time */ + int delay; /* Delay between chip accesses in uS */ struct pmbus_driver_info info; }; @@ -52,10 +53,10 @@ MODULE_PARM_DESC(delay, "Delay between chip accesses in uS"); /* Some chips need a delay between accesses */ static inline void zl6100_wait(const struct zl6100_data *data) { - if (delay) { + if (data->delay) { s64 delta = ktime_us_delta(ktime_get(), data->access); - if (delta < delay) - udelay(delay - delta); + if (delta < data->delay) + udelay(data->delay - delta); } } @@ -207,8 +208,9 @@ static int zl6100_probe(struct i2c_client *client, * can be cleared later for additional chips if tests show that it * is not needed (in other words, better be safe than sorry). */ + data->delay = delay; if (data->id == zl2004 || data->id == zl6105) - delay = 0; + data->delay = 0; /* * Since there was a direct I2C device access above, wait before -- cgit v1.2.1 From 1bd612a25855f4cc9345052b53d7da697dba6358 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 5 Mar 2012 11:13:52 -0800 Subject: hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 Also update IDT datasheet locations. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare --- Documentation/hwmon/jc42 | 20 ++++++++++++++------ drivers/hwmon/Kconfig | 6 +++--- drivers/hwmon/jc42.c | 20 ++++++++++++++++++-- 3 files changed, 35 insertions(+), 11 deletions(-) diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index e7133750286f..52729a756c1b 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -7,21 +7,29 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf - * IDT TSE2002B3, TS3000B3 - Prefix: 'tse2002b3', 'ts3000b3' + * Atmel AT30TS00 + Prefix: 'at30ts00' Addresses scanned: I2C 0x18 - 0x1f Datasheets: - http://www.idt.com/products/getdoc.cfm?docid=18715691 - http://www.idt.com/products/getdoc.cfm?docid=18715692 + http://www.atmel.com/Images/doc8585.pdf + * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2 + Prefix: 'tse2002', 'ts3000' + Addresses scanned: I2C 0x18 - 0x1f + Datasheets: + http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf + http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf + http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf + http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf * Maxim MAX6604 Prefix: 'max6604' Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf - * Microchip MCP9805, MCP98242, MCP98243, MCP9843 - Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' + * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843 + Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' Addresses scanned: I2C 0x18 - 0x1f Datasheets: + http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 91a51aff5363..dad895fec62a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -497,9 +497,9 @@ config SENSORS_JC42 If you say yes here, you get support for JEDEC JC42.4 compliant temperature sensors, which are used on many DDR3 memory modules for mobile devices and servers. Support will include, but not be limited - to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, - MCP9843, SE97, SE98, STTS424(E), STTS2002, STTS3000, TSE2002B3, and - TS3000B3. + to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, + MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002, + STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. This driver can also be built as a module. If so, the module will be called jc42. diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 08430ecb306a..b927ee5ccdd7 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -64,6 +64,7 @@ static const unsigned short normal_i2c[] = { /* Manufacturer IDs */ #define ADT_MANID 0x11d4 /* Analog Devices */ +#define ATMEL_MANID 0x001f /* Atmel */ #define MAX_MANID 0x004d /* Maxim */ #define IDT_MANID 0x00b3 /* IDT */ #define MCP_MANID 0x0054 /* Microchip */ @@ -77,15 +78,25 @@ static const unsigned short normal_i2c[] = { #define ADT7408_DEVID 0x0801 #define ADT7408_DEVID_MASK 0xffff +/* Atmel */ +#define AT30TS00_DEVID 0x8201 +#define AT30TS00_DEVID_MASK 0xffff + /* IDT */ #define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */ #define TS3000B3_DEVID_MASK 0xffff +#define TS3000GB2_DEVID 0x2912 /* Also matches TSE2002GB2 */ +#define TS3000GB2_DEVID_MASK 0xffff + /* Maxim */ #define MAX6604_DEVID 0x3e00 #define MAX6604_DEVID_MASK 0xffff /* Microchip */ +#define MCP9804_DEVID 0x0200 +#define MCP9804_DEVID_MASK 0xfffc + #define MCP98242_DEVID 0x2000 #define MCP98242_DEVID_MASK 0xfffc @@ -129,8 +140,11 @@ struct jc42_chips { static struct jc42_chips jc42_chips[] = { { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, + { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK }, { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK }, + { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK }, { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK }, + { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK }, { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK }, { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK }, { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK }, @@ -167,10 +181,12 @@ static struct jc42_data *jc42_update_device(struct device *dev); static const struct i2c_device_id jc42_id[] = { { "adt7408", 0 }, + { "at30ts00", 0 }, { "cat94ts02", 0 }, { "cat6095", 0 }, { "jc42", 0 }, { "max6604", 0 }, + { "mcp9804", 0 }, { "mcp9805", 0 }, { "mcp98242", 0 }, { "mcp98243", 0 }, @@ -181,8 +197,8 @@ static const struct i2c_device_id jc42_id[] = { { "stts424", 0 }, { "stts2002", 0 }, { "stts3000", 0 }, - { "tse2002b3", 0 }, - { "ts3000b3", 0 }, + { "tse2002", 0 }, + { "ts3000", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, jc42_id); -- cgit v1.2.1 From 902c6a96a7cb9c50d2a8aed1788efad0a5d8f04c Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 7 Mar 2012 19:09:34 +0000 Subject: dm ioctl: do not leak argv if target message only contains whitespace If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: Jesper Juhl Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 31c2dc25886d..1ce84ed0b765 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1437,7 +1437,7 @@ static int target_message(struct dm_ioctl *param, size_t param_size) if (!argc) { DMWARN("Empty message received."); - goto out; + goto out_argv; } table = dm_get_live_table(md); -- cgit v1.2.1 From 0c535e0d6f463365c29623350dbd91642363c39b Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Wed, 7 Mar 2012 19:09:37 +0000 Subject: dm io: fix discard support This patch fixes a crash by recognising discards in dm_io. Currently dm_mirror can send REQ_DISCARD bios if running over a discard-enabled device and without support in dm_io the system crashes badly. BUG: unable to handle kernel paging request at 00800000 IP: __bio_add_page.part.17+0xf5/0x1e0 ... bio_add_page+0x56/0x70 dispatch_io+0x1cf/0x240 [dm_mod] ? km_get_page+0x50/0x50 [dm_mod] ? vm_next_page+0x20/0x20 [dm_mod] ? mirror_flush+0x130/0x130 [dm_mirror] dm_io+0xdc/0x2b0 [dm_mod] ... Introduced in 2.6.38-rc1 by commit 5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4 (dm raid1: support discard). Signed-off-by: Milan Broz Cc: stable@kernel.org Acked-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-io.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index ad2eba40e319..ea5dd289fe2a 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -296,6 +296,8 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, unsigned offset; unsigned num_bvecs; sector_t remaining = where->count; + struct request_queue *q = bdev_get_queue(where->bdev); + sector_t discard_sectors; /* * where->count may be zero if rw holds a flush and we need to @@ -305,9 +307,12 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, /* * Allocate a suitably sized-bio. */ - num_bvecs = dm_sector_div_up(remaining, - (PAGE_SIZE >> SECTOR_SHIFT)); - num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), num_bvecs); + if (rw & REQ_DISCARD) + num_bvecs = 1; + else + num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), + dm_sector_div_up(remaining, (PAGE_SIZE >> SECTOR_SHIFT))); + bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios); bio->bi_sector = where->sector + (where->count - remaining); bio->bi_bdev = where->bdev; @@ -315,10 +320,14 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, bio->bi_destructor = dm_bio_destructor; store_io_and_region_in_bio(bio, io, region); - /* - * Try and add as many pages as possible. - */ - while (remaining) { + if (rw & REQ_DISCARD) { + discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining); + bio->bi_size = discard_sectors << SECTOR_SHIFT; + remaining -= discard_sectors; + } else while (remaining) { + /* + * Try and add as many pages as possible. + */ dp->get_page(dp, &page, &len, &offset); len = min(len, to_bytes(remaining)); if (!bio_add_page(bio, page, len, offset)) -- cgit v1.2.1 From 1212268fd9816e3b8801e57b896fceaec71969ad Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 7 Mar 2012 19:09:39 +0000 Subject: dm flakey: fix crash on read when corrupt_bio_byte not set The following BUG is hit on the first read that is submitted to a dm flakey test device while the device is "down" if the corrupt_bio_byte feature wasn't requested when the device's table was loaded. Example DM table that will hit this BUG: 0 2097152 flakey 8:0 2048 0 30 This bug was introduced by commit a3998799fb4df0b0af8271a7d50c4269032397aa (dm flakey: add corrupt_bio_byte feature) in v3.1-rc1. BUG: unable to handle kernel paging request at ffff8801cfce3fff IP: [] corrupt_bio_data+0x6e/0xae [dm_flakey] PGD 1606063 PUD 0 Oops: 0002 [#1] SMP ... Call Trace: [] flakey_end_io+0x42/0x48 [dm_flakey] [] clone_endio+0x54/0xb6 [dm_mod] [] bio_endio+0x2d/0x2f [] req_bio_endio+0x96/0x9f [] blk_update_request+0x1dc/0x3a9 [] ? rcu_read_unlock+0x21/0x23 [] blk_update_bidi_request+0x20/0x6e [] blk_end_bidi_request+0x1f/0x5d [] blk_end_request+0x10/0x12 [] scsi_io_completion+0x1e5/0x4b1 [] scsi_finish_command+0xec/0xf5 [] scsi_softirq_done+0xff/0x108 [] blk_done_softirq+0x84/0x98 [] __do_softirq+0xe3/0x1d5 [] ? _raw_spin_lock+0x62/0x69 [] ? handle_irq_event+0x4c/0x61 [] call_softirq+0x1c/0x30 [] do_softirq+0x4b/0xa3 [] irq_exit+0x53/0xca [] do_IRQ+0x9d/0xb4 [] common_interrupt+0x73/0x73 ... Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Alasdair G Kergon --- drivers/md/dm-flakey.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index 9fb18c147825..b280c433e4a0 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -323,7 +323,7 @@ static int flakey_end_io(struct dm_target *ti, struct bio *bio, * Corrupt successful READs while in down state. * If flags were specified, only corrupt those that match. */ - if (!error && bio_submitted_while_down && + if (fc->corrupt_bio_byte && !error && bio_submitted_while_down && (bio_data_dir(bio) == READ) && (fc->corrupt_bio_rw == READ) && all_corrupt_bio_flags_match(bio, fc)) corrupt_bio_data(bio, fc); -- cgit v1.2.1 From 1f3db25d8be4ac50b897b39609802183ea68a514 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 7 Mar 2012 19:09:41 +0000 Subject: dm thin metadata: remove incorrect close_device on creation error paths The __open_device() error paths in __create_thin() and __create_snap() incorrectly call __close_device() even if td was not initialized by __open_device(). Remove this. Also document __open_device() return values, remove a redundant td->changed = 1 in __create_thin(), and insert an additional safeguard against creating an already-existing device. Signed-off-by: Mike Snitzer Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-thin-metadata.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 59c4f0446ffa..13d964636d57 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -789,6 +789,11 @@ int dm_pool_metadata_close(struct dm_pool_metadata *pmd) return 0; } +/* + * __open_device: Returns @td corresponding to device with id @dev, + * creating it if @create is set and incrementing @td->open_count. + * On failure, @td is undefined. + */ static int __open_device(struct dm_pool_metadata *pmd, dm_thin_id dev, int create, struct dm_thin_device **td) @@ -799,10 +804,16 @@ static int __open_device(struct dm_pool_metadata *pmd, struct disk_device_details details_le; /* - * Check the device isn't already open. + * If the device is already open, return it. */ list_for_each_entry(td2, &pmd->thin_devices, list) if (td2->id == dev) { + /* + * May not create an already-open device. + */ + if (create) + return -EEXIST; + td2->open_count++; *td = td2; return 0; @@ -817,6 +828,9 @@ static int __open_device(struct dm_pool_metadata *pmd, if (r != -ENODATA || !create) return r; + /* + * Create new device. + */ changed = 1; details_le.mapped_blocks = 0; details_le.transaction_id = cpu_to_le64(pmd->trans_id); @@ -882,12 +896,10 @@ static int __create_thin(struct dm_pool_metadata *pmd, r = __open_device(pmd, dev, 1, &td); if (r) { - __close_device(td); dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root); dm_btree_del(&pmd->bl_info, dev_root); return r; } - td->changed = 1; __close_device(td); return r; @@ -967,14 +979,14 @@ static int __create_snap(struct dm_pool_metadata *pmd, goto bad; r = __set_snapshot_details(pmd, td, origin, pmd->time); + __close_device(td); + if (r) goto bad; - __close_device(td); return 0; bad: - __close_device(td); dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root); dm_btree_remove(&pmd->details_info, pmd->details_root, &key, &pmd->details_root); -- cgit v1.2.1 From 4469a5f387fdde956894137751a41473618a4a52 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Wed, 7 Mar 2012 19:09:43 +0000 Subject: dm thin metadata: unlock superblock in init_pmd error path If dm_sm_disk_create() fails the superblock must be unlocked. Signed-off-by: Joe Thornber Acked-by: Mike Snitzer Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-thin-metadata.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 13d964636d57..05b7ffc030ed 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -385,6 +385,7 @@ static int init_pmd(struct dm_pool_metadata *pmd, data_sm = dm_sm_disk_create(tm, nr_blocks); if (IS_ERR(data_sm)) { DMERR("sm_disk_create failed"); + dm_tm_unlock(tm, sblock); r = PTR_ERR(data_sm); goto bad; } -- cgit v1.2.1 From af63bcb817cf708f53bcae6edc2e3fb7dd7d8051 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Wed, 7 Mar 2012 19:09:44 +0000 Subject: dm thin metadata: decrement counter after removing mapped block Correct the number of mapped sectors shown on a thin device's status line by decrementing td->mapped_blocks in __remove() each time a block is removed. Signed-off-by: Joe Thornber Acked-by: Mike Snitzer Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-thin-metadata.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 05b7ffc030ed..237571af77fd 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1224,6 +1224,8 @@ static int __remove(struct dm_thin_device *td, dm_block_t block) if (r) return r; + td->mapped_blocks--; + td->changed = 1; pmd->need_commit = 1; return 0; -- cgit v1.2.1 From 3aa3b2b2b1edb813dc5342d0108befc39541542d Mon Sep 17 00:00:00 2001 From: Jonathan E Brassow Date: Wed, 7 Mar 2012 19:09:47 +0000 Subject: dm raid: set MD_CHANGE_DEVS when rebuilding The 'rebuild' parameter is used to rebuild individual devices in an array (e.g. resynchronize a RAID1 device or recalculate a parity device in higher RAID). The MD_CHANGE_DEVS flag must be set when this parameter is given in order to write out the superblocks and make the change take immediate effect. The code that handles new devices in super_load already sets MD_CHANGE_DEVS and 'FirstUse'. (The 'FirstUse' flag was being set as a special case for rebuilds in super_init_validation.) Add a condition for rebuilds in super_load to take care of both flags without the special case in 'super_init_validation'. Signed-off-by: Jonathan Brassow Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-raid.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index 86cb7e5d83d5..f53bb389c18f 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -668,7 +668,14 @@ static int super_load(struct md_rdev *rdev, struct md_rdev *refdev) return ret; sb = page_address(rdev->sb_page); - if (sb->magic != cpu_to_le32(DM_RAID_MAGIC)) { + + /* + * Two cases that we want to write new superblocks and rebuild: + * 1) New device (no matching magic number) + * 2) Device specified for rebuild (!In_sync w/ offset == 0) + */ + if ((sb->magic != cpu_to_le32(DM_RAID_MAGIC)) || + (!test_bit(In_sync, &rdev->flags) && !rdev->recovery_offset)) { super_sync(rdev->mddev, rdev); set_bit(FirstUse, &rdev->flags); @@ -745,11 +752,8 @@ static int super_init_validation(struct mddev *mddev, struct md_rdev *rdev) */ rdev_for_each(r, t, mddev) { if (!test_bit(In_sync, &r->flags)) { - if (!test_bit(FirstUse, &r->flags)) - DMERR("Superblock area of " - "rebuild device %d should have been " - "cleared.", r->raid_disk); - set_bit(FirstUse, &r->flags); + DMINFO("Device %d specified for rebuild: " + "Clearing superblock", r->raid_disk); rebuilds++; } else if (test_bit(FirstUse, &r->flags)) new_devs++; -- cgit v1.2.1 From 0ca93de9b789e0eb05e103f0c04de72df13da73a Mon Sep 17 00:00:00 2001 From: Jonathan E Brassow Date: Wed, 7 Mar 2012 19:09:48 +0000 Subject: dm raid: fix flush support Fix dm-raid flush support. Both md and dm have support for flush, but the dm-raid target forgot to set the flag to indicate that flushes should be passed on. (Important for data integrity e.g. with writeback cache enabled.) Signed-off-by: Jonathan Brassow Acked-by: Mike Snitzer Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-raid.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index f53bb389c18f..787022c18187 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -975,6 +975,7 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv) INIT_WORK(&rs->md.event_work, do_table_event); ti->private = rs; + ti->num_flush_requests = 1; mutex_lock(&rs->md.reconfig_mutex); ret = md_run(&rs->md); -- cgit v1.2.1 From c4632aed3e5b134c55b54af19db49662959384c1 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 7 Mar 2012 16:39:05 +0530 Subject: regulator: tps65910: Configure correct value for VDDCTRL vout reg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As per datasheet, the voltage output is defined as from SEL[6:0] = 3 to 64 (dec) Vout= (SEL[6:0] × 12.5 mV + 562.5 mV) The list_voltage returns the vout as 600mV + selector * 12.5mV and so equivalent VSEL is selector + 3. Adding 3 on selector when configuring VSEL register for VDDCTRL output. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/tps65910-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 5c15ba01e9c7..40ecf5165899 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -662,7 +662,7 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel); break; case TPS65911_REG_VDDCTRL: - vsel = selector; + vsel = selector + 3; tps65910_reg_write(pmic, TPS65911_VDDCTRL_OP, vsel); } -- cgit v1.2.1 From 81e5d41d7ed4f6c61ba3d2414f4f9ddf6d934ebb Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Tue, 6 Mar 2012 15:05:46 -0800 Subject: openvswitch: Fix checksum update for actions on UDP packets. When modifying IP addresses or ports on a UDP packet we don't correctly follow the rules for unchecksummed packets. This meant that packets without a checksum can be given a incorrect new checksum and packets with a checksum can become marked as being unchecksummed. This fixes it to handle those requirements. Signed-off-by: Jesse Gross --- net/openvswitch/actions.c | 44 ++++++++++++++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 12 deletions(-) diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index 2725d1bdf291..48badffaafc1 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2007-2011 Nicira Networks. + * Copyright (c) 2007-2012 Nicira Networks. * * This program is free software; you can redistribute it and/or * modify it under the terms of version 2 of the GNU General Public @@ -145,9 +145,16 @@ static void set_ip_addr(struct sk_buff *skb, struct iphdr *nh, inet_proto_csum_replace4(&tcp_hdr(skb)->check, skb, *addr, new_addr, 1); } else if (nh->protocol == IPPROTO_UDP) { - if (likely(transport_len >= sizeof(struct udphdr))) - inet_proto_csum_replace4(&udp_hdr(skb)->check, skb, - *addr, new_addr, 1); + if (likely(transport_len >= sizeof(struct udphdr))) { + struct udphdr *uh = udp_hdr(skb); + + if (uh->check || skb->ip_summed == CHECKSUM_PARTIAL) { + inet_proto_csum_replace4(&uh->check, skb, + *addr, new_addr, 1); + if (!uh->check) + uh->check = CSUM_MANGLED_0; + } + } } csum_replace4(&nh->check, *addr, new_addr); @@ -197,8 +204,22 @@ static void set_tp_port(struct sk_buff *skb, __be16 *port, skb->rxhash = 0; } -static int set_udp_port(struct sk_buff *skb, - const struct ovs_key_udp *udp_port_key) +static void set_udp_port(struct sk_buff *skb, __be16 *port, __be16 new_port) +{ + struct udphdr *uh = udp_hdr(skb); + + if (uh->check && skb->ip_summed != CHECKSUM_PARTIAL) { + set_tp_port(skb, port, new_port, &uh->check); + + if (!uh->check) + uh->check = CSUM_MANGLED_0; + } else { + *port = new_port; + skb->rxhash = 0; + } +} + +static int set_udp(struct sk_buff *skb, const struct ovs_key_udp *udp_port_key) { struct udphdr *uh; int err; @@ -210,16 +231,15 @@ static int set_udp_port(struct sk_buff *skb, uh = udp_hdr(skb); if (udp_port_key->udp_src != uh->source) - set_tp_port(skb, &uh->source, udp_port_key->udp_src, &uh->check); + set_udp_port(skb, &uh->source, udp_port_key->udp_src); if (udp_port_key->udp_dst != uh->dest) - set_tp_port(skb, &uh->dest, udp_port_key->udp_dst, &uh->check); + set_udp_port(skb, &uh->dest, udp_port_key->udp_dst); return 0; } -static int set_tcp_port(struct sk_buff *skb, - const struct ovs_key_tcp *tcp_port_key) +static int set_tcp(struct sk_buff *skb, const struct ovs_key_tcp *tcp_port_key) { struct tcphdr *th; int err; @@ -328,11 +348,11 @@ static int execute_set_action(struct sk_buff *skb, break; case OVS_KEY_ATTR_TCP: - err = set_tcp_port(skb, nla_data(nested_attr)); + err = set_tcp(skb, nla_data(nested_attr)); break; case OVS_KEY_ATTR_UDP: - err = set_udp_port(skb, nla_data(nested_attr)); + err = set_udp(skb, nla_data(nested_attr)); break; } -- cgit v1.2.1 From d9a5f4dd437ceb007e1f118e90ba5587a5e04d20 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 7 Mar 2012 17:28:01 -0800 Subject: ARM: OMAP2+: Fix build issues with missing include of linux/bug.h Otherwise we can get the following if bug.h is not included from kernel.h: arch/arm/mach-omap2/powerdomain-common.c: In function 'omap2_pwrdm_get_mem_bank_onstate_mask': arch/arm/mach-omap2/powerdomain-common.c:64:3: error: implicit declaration of function 'WARN_ON' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Signed-off-by: Tony Lindgren Signed-off-by: Olof Johansson --- arch/arm/mach-omap2/clkt_clksel.c | 1 + arch/arm/mach-omap2/powerdomain-common.c | 1 + arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 1 + arch/arm/mach-omap2/powerdomains3xxx_data.c | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index e25364de028a..04d551b1f7f7 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -43,6 +43,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index f97afff68d6d..c0aeabfcf009 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -13,6 +13,7 @@ #include #include +#include #include "pm.h" #include "cm.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index 6a17e4ca1d79..0f0a9f1592fe 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -15,6 +15,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 8ef26daeed68..b7ea468eea32 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -13,6 +13,7 @@ #include #include +#include #include -- cgit v1.2.1 From 6028505c29dc89a3140df64a53d0d12038a87fed Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 7 Mar 2012 18:54:24 -0800 Subject: ARM: OMAP2+: Fix section warnings for hsmmc_init_one Otherwise we can get the following error depending on the compiler: WARNING: arch/arm/mach-omap2/built-in.o(.text+0xafe0): Section mismatch in reference from the function omap_hsmmc_init_one() to the function .init.text:omap_hsmmc_pdata_init() The function omap_hsmmc_init_one() references the function __init omap_hsmmc_pdata_init(). This is often because omap_hsmmc_init_one lacks a __init annotation or the annotation of omap_hsmmc_pdata_init is wrong. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a97876da7fad..8121720e942f 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -465,7 +465,7 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -static void omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, +static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; -- cgit v1.2.1 From 09c1d446fe0e2e3f34b366a6b3c1b19efa1522af Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 6 Mar 2012 19:46:41 +0000 Subject: ehea: restore multicast and rx_errors fields Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet Cc: Anton Blanchard Cc: Thadeu Lima de Souza Cascardo Acked-by: Thadeu Lima de Souza Cascardo Tested-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 5d5fb2627184..e6893cdfd13b 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -336,7 +336,9 @@ static struct rtnl_link_stats64 *ehea_get_stats64(struct net_device *dev, stats->tx_bytes = tx_bytes; stats->rx_packets = rx_packets; - return &port->stats; + stats->multicast = port->stats.multicast; + stats->rx_errors = port->stats.rx_errors; + return stats; } static void ehea_update_stats(struct work_struct *work) -- cgit v1.2.1 From d9e179ecec0805c41b17f9a0c3b925d415677772 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Tue, 6 Mar 2012 22:25:14 +0000 Subject: bridge: br_log_state() s/entering/entered/ When br_log_state() is reporting state it should say "entered" istead of "entering" since state at this point is already changed. Signed-off-by: Paulius Zaleckas Signed-off-by: David S. Miller --- net/bridge/br_stp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index 6751ed4e0c07..8c836d96ba76 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -31,7 +31,7 @@ static const char *const br_port_state_names[] = { void br_log_state(const struct net_bridge_port *p) { - br_info(p->br, "port %u(%s) entering %s state\n", + br_info(p->br, "port %u(%s) entered %s state\n", (unsigned) p->port_no, p->dev->name, br_port_state_names[p->state]); } -- cgit v1.2.1 From 5200959b833ddacf28b6ffce8c331dfd6e0ca797 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Tue, 6 Mar 2012 22:25:22 +0000 Subject: bridge: fix state reporting when port is disabled Now we have: eth0: link *down* br0: port 1(eth0) entered *forwarding* state br_log_state(p) should be called *after* p->state is set to BR_STATE_DISABLED. Reported-by: Zilvinas Valinskas Signed-off-by: Paulius Zaleckas Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_stp_if.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c index 19308e305d85..f494496373d6 100644 --- a/net/bridge/br_stp_if.c +++ b/net/bridge/br_stp_if.c @@ -98,14 +98,13 @@ void br_stp_disable_port(struct net_bridge_port *p) struct net_bridge *br = p->br; int wasroot; - br_log_state(p); - wasroot = br_is_root_bridge(br); br_become_designated_port(p); p->state = BR_STATE_DISABLED; p->topology_change_ack = 0; p->config_pending = 0; + br_log_state(p); br_ifinfo_notify(RTM_NEWLINK, p); del_timer(&p->message_age_timer); -- cgit v1.2.1 From 783154573236f46b730b2eea17d2e6e04bdb3251 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 7 Mar 2012 00:02:04 +0000 Subject: atl1c: set ATL1C_WORK_EVENT_RESET bit correctly ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 1ff3c6df35a2..47a9bb2c813c 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1710,7 +1710,7 @@ static irqreturn_t atl1c_intr(int irq, void *data) "atl1c hardware error (status = 0x%x)\n", status & ISR_ERROR); /* reset MAC */ - adapter->work_event |= ATL1C_WORK_EVENT_RESET; + set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event); schedule_work(&adapter->common_task); return IRQ_HANDLED; } -- cgit v1.2.1 From dcf353b17007841f91e1735e33790508c84c9ad0 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 7 Mar 2012 05:56:35 +0000 Subject: mlx4_core: fix bug in modify_cq wrapper for resize flow. The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index bfdb7af19e49..8752e6e08169 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2255,8 +2255,7 @@ int mlx4_MODIFY_CQ_wrapper(struct mlx4_dev *dev, int slave, if (vhcr->op_modifier == 0) { err = handle_resize(dev, slave, vhcr, inbox, outbox, cmd, cq); - if (err) - goto ex_put; + goto ex_put; } err = mlx4_DMA_wrapper(dev, slave, vhcr, inbox, outbox, cmd); -- cgit v1.2.1 From 5faa5df1fa2024bd750089ff21dcc4191798263d Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 6 Mar 2012 21:20:26 +0000 Subject: inetpeer: Invalidate the inetpeer tree along with the routing cache We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- include/net/inetpeer.h | 3 ++ net/ipv4/inetpeer.c | 80 +++++++++++++++++++++++++++++++++++++++++++++++++- net/ipv4/route.c | 1 + 3 files changed, 83 insertions(+), 1 deletion(-) diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h index 06b795dd5906..ff04a33acf00 100644 --- a/include/net/inetpeer.h +++ b/include/net/inetpeer.h @@ -41,6 +41,7 @@ struct inet_peer { u32 pmtu_orig; u32 pmtu_learned; struct inetpeer_addr_base redirect_learned; + struct list_head gc_list; /* * Once inet_peer is queued for deletion (refcnt == -1), following fields * are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp @@ -96,6 +97,8 @@ static inline struct inet_peer *inet_getpeer_v6(const struct in6_addr *v6daddr, extern void inet_putpeer(struct inet_peer *p); extern bool inet_peer_xrlim_allow(struct inet_peer *peer, int timeout); +extern void inetpeer_invalidate_tree(int family); + /* * temporary check to make sure we dont access rid, ip_id_count, tcp_ts, * tcp_ts_stamp if no refcount is taken on inet_peer diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c index bf4a9c4808e1..deea2e96b7f2 100644 --- a/net/ipv4/inetpeer.c +++ b/net/ipv4/inetpeer.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -66,6 +67,11 @@ static struct kmem_cache *peer_cachep __read_mostly; +static LIST_HEAD(gc_list); +static const int gc_delay = 60 * HZ; +static struct delayed_work gc_work; +static DEFINE_SPINLOCK(gc_lock); + #define node_height(x) x->avl_height #define peer_avl_empty ((struct inet_peer *)&peer_fake_node) @@ -102,6 +108,50 @@ int inet_peer_threshold __read_mostly = 65536 + 128; /* start to throw entries m int inet_peer_minttl __read_mostly = 120 * HZ; /* TTL under high load: 120 sec */ int inet_peer_maxttl __read_mostly = 10 * 60 * HZ; /* usual time to live: 10 min */ +static void inetpeer_gc_worker(struct work_struct *work) +{ + struct inet_peer *p, *n; + LIST_HEAD(list); + + spin_lock_bh(&gc_lock); + list_replace_init(&gc_list, &list); + spin_unlock_bh(&gc_lock); + + if (list_empty(&list)) + return; + + list_for_each_entry_safe(p, n, &list, gc_list) { + + if(need_resched()) + cond_resched(); + + if (p->avl_left != peer_avl_empty) { + list_add_tail(&p->avl_left->gc_list, &list); + p->avl_left = peer_avl_empty; + } + + if (p->avl_right != peer_avl_empty) { + list_add_tail(&p->avl_right->gc_list, &list); + p->avl_right = peer_avl_empty; + } + + n = list_entry(p->gc_list.next, struct inet_peer, gc_list); + + if (!atomic_read(&p->refcnt)) { + list_del(&p->gc_list); + kmem_cache_free(peer_cachep, p); + } + } + + if (list_empty(&list)) + return; + + spin_lock_bh(&gc_lock); + list_splice(&list, &gc_list); + spin_unlock_bh(&gc_lock); + + schedule_delayed_work(&gc_work, gc_delay); +} /* Called from ip_output.c:ip_init */ void __init inet_initpeers(void) @@ -126,6 +176,7 @@ void __init inet_initpeers(void) 0, SLAB_HWCACHE_ALIGN | SLAB_PANIC, NULL); + INIT_DELAYED_WORK_DEFERRABLE(&gc_work, inetpeer_gc_worker); } static int addr_compare(const struct inetpeer_addr *a, @@ -449,7 +500,7 @@ relookup: p->pmtu_orig = 0; p->redirect_genid = 0; memset(&p->redirect_learned, 0, sizeof(p->redirect_learned)); - + INIT_LIST_HEAD(&p->gc_list); /* Link the node. */ link_to_pool(p, base); @@ -509,3 +560,30 @@ bool inet_peer_xrlim_allow(struct inet_peer *peer, int timeout) return rc; } EXPORT_SYMBOL(inet_peer_xrlim_allow); + +void inetpeer_invalidate_tree(int family) +{ + struct inet_peer *old, *new, *prev; + struct inet_peer_base *base = family_to_base(family); + + write_seqlock_bh(&base->lock); + + old = base->root; + if (old == peer_avl_empty_rcu) + goto out; + + new = peer_avl_empty_rcu; + + prev = cmpxchg(&base->root, old, new); + if (prev == old) { + base->total = 0; + spin_lock(&gc_lock); + list_add_tail(&prev->gc_list, &gc_list); + spin_unlock(&gc_lock); + schedule_delayed_work(&gc_work, gc_delay); + } + +out: + write_sequnlock_bh(&base->lock); +} +EXPORT_SYMBOL(inetpeer_invalidate_tree); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index bcacf54e5418..23ce0c1287ab 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -938,6 +938,7 @@ static void rt_cache_invalidate(struct net *net) get_random_bytes(&shuffle, sizeof(shuffle)); atomic_add(shuffle + 1U, &net->ipv4.rt_genid); redirect_genid++; + inetpeer_invalidate_tree(AF_INET); } /* -- cgit v1.2.1 From ac3f48de09d8f4b73397047e413fadff7f65cfa7 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 6 Mar 2012 21:21:10 +0000 Subject: route: Remove redirect_genid As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- include/net/inetpeer.h | 1 - net/ipv4/inetpeer.c | 1 - net/ipv4/route.c | 11 ++--------- 3 files changed, 2 insertions(+), 11 deletions(-) diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h index ff04a33acf00..b94765e38e80 100644 --- a/include/net/inetpeer.h +++ b/include/net/inetpeer.h @@ -35,7 +35,6 @@ struct inet_peer { u32 metrics[RTAX_MAX]; u32 rate_tokens; /* rate limiting for ICMP */ - int redirect_genid; unsigned long rate_last; unsigned long pmtu_expires; u32 pmtu_orig; diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c index deea2e96b7f2..d4d61b694fab 100644 --- a/net/ipv4/inetpeer.c +++ b/net/ipv4/inetpeer.c @@ -498,7 +498,6 @@ relookup: p->rate_last = 0; p->pmtu_expires = 0; p->pmtu_orig = 0; - p->redirect_genid = 0; memset(&p->redirect_learned, 0, sizeof(p->redirect_learned)); INIT_LIST_HEAD(&p->gc_list); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 23ce0c1287ab..019774796174 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -132,7 +132,6 @@ static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ; static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20; static int ip_rt_min_advmss __read_mostly = 256; static int rt_chain_length_max __read_mostly = 20; -static int redirect_genid; static struct delayed_work expires_work; static unsigned long expires_ljiffies; @@ -937,7 +936,6 @@ static void rt_cache_invalidate(struct net *net) get_random_bytes(&shuffle, sizeof(shuffle)); atomic_add(shuffle + 1U, &net->ipv4.rt_genid); - redirect_genid++; inetpeer_invalidate_tree(AF_INET); } @@ -1486,10 +1484,8 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, peer = rt->peer; if (peer) { - if (peer->redirect_learned.a4 != new_gw || - peer->redirect_genid != redirect_genid) { + if (peer->redirect_learned.a4 != new_gw) { peer->redirect_learned.a4 = new_gw; - peer->redirect_genid = redirect_genid; atomic_inc(&__rt_peer_genid); } check_peer_redir(&rt->dst, peer); @@ -1794,8 +1790,6 @@ static void ipv4_validate_peer(struct rtable *rt) if (peer) { check_peer_pmtu(&rt->dst, peer); - if (peer->redirect_genid != redirect_genid) - peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) check_peer_redir(&rt->dst, peer); @@ -1959,8 +1953,7 @@ static void rt_init_metrics(struct rtable *rt, const struct flowi4 *fl4, dst_init_metrics(&rt->dst, peer->metrics, false); check_peer_pmtu(&rt->dst, peer); - if (peer->redirect_genid != redirect_genid) - peer->redirect_learned.a4 = 0; + if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { rt->rt_gateway = peer->redirect_learned.a4; -- cgit v1.2.1 From 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Wed, 7 Mar 2012 10:19:28 +0000 Subject: net/usbnet: avoid recursive locking in usbnet_stop() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit |kernel BUG at kernel/rtmutex.c:724! |[] (rt_spin_lock_slowlock+0x108/0x2bc) from [] (defer_bh+0x1c/0xb4) |[] (defer_bh+0x1c/0xb4) from [] (rx_complete+0x14c/0x194) |[] (rx_complete+0x14c/0x194) from [] (usb_hcd_giveback_urb+0xa0/0xf0) |[] (usb_hcd_giveback_urb+0xa0/0xf0) from [] (musb_giveback+0x34/0x40) |[] (musb_giveback+0x34/0x40) from [] (musb_advance_schedule+0xb4/0x1c0) |[] (musb_advance_schedule+0xb4/0x1c0) from [] (musb_cleanup_urb.isra.9+0x80/0x8c) |[] (musb_cleanup_urb.isra.9+0x80/0x8c) from [] (musb_urb_dequeue+0xec/0x108) |[] (musb_urb_dequeue+0xec/0x108) from [] (unlink1+0xbc/0xcc) |[] (unlink1+0xbc/0xcc) from [] (usb_hcd_unlink_urb+0x54/0xa8) |[] (usb_hcd_unlink_urb+0x54/0xa8) from [] (unlink_urbs.isra.17+0x2c/0x58) |[] (unlink_urbs.isra.17+0x2c/0x58) from [] (usbnet_terminate_urbs+0x94/0x10c) |[] (usbnet_terminate_urbs+0x94/0x10c) from [] (usbnet_stop+0x100/0x15c) |[] (usbnet_stop+0x100/0x15c) from [] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: Aníbal Almeida Pinto Signed-off-by: Sebastian Andrzej Siewior Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index fae0fbd8bc88..81b96e303757 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -589,6 +589,7 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) entry = (struct skb_data *) skb->cb; urb = entry->urb; + spin_unlock_irqrestore(&q->lock, flags); // during some PM-driven resume scenarios, // these (async) unlinks complete immediately retval = usb_unlink_urb (urb); @@ -596,6 +597,7 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) netdev_dbg(dev->net, "unlink urb err, %d\n", retval); else count++; + spin_lock_irqsave(&q->lock, flags); } spin_unlock_irqrestore (&q->lock, flags); return count; -- cgit v1.2.1 From cf00790dea6f210ddd01a6656da58c7c9a4ea0e4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Wed, 7 Mar 2012 23:33:00 +0100 Subject: drm/radeon/kms: set SX_MISC in the r6xx blit code (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mesa may set it to 1, causing all primitives to be killed. v2: also update the r7xx code Signed-off-by: Marek Olšák Reviewed-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit_shaders.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600_blit_shaders.c b/drivers/gpu/drm/radeon/r600_blit_shaders.c index 2d1f6c5ee2a7..73e2c7c6edbc 100644 --- a/drivers/gpu/drm/radeon/r600_blit_shaders.c +++ b/drivers/gpu/drm/radeon/r600_blit_shaders.c @@ -313,6 +313,10 @@ const u32 r6xx_default_state[] = 0x00000000, /* VGT_REUSE_OFF */ 0x00000000, /* VGT_VTX_CNT_EN */ + 0xc0016900, + 0x000000d4, + 0x00000000, /* SX_MISC */ + 0xc0016900, 0x000002c8, 0x00000000, /* VGT_STRMOUT_BUFFER_EN */ @@ -625,6 +629,10 @@ const u32 r7xx_default_state[] = 0x00000000, /* VGT_REUSE_OFF */ 0x00000000, /* VGT_VTX_CNT_EN */ + 0xc0016900, + 0x000000d4, + 0x00000000, /* SX_MISC */ + 0xc0016900, 0x000002c8, 0x00000000, /* VGT_STRMOUT_BUFFER_EN */ -- cgit v1.2.1 From 38aa4a568ba4c3ccba83e862a01e3e60e3b811ee Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 7 Mar 2012 19:05:01 -0500 Subject: drm/radeon/kms: fix hdmi duallink checks All pre-SI chips are limited to 165 Mhz for single link. Code in question will be re-enabled when SI support is added. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755 https://bugzilla.kernel.org/show_bug.cgi?id=42887 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- drivers/gpu/drm/radeon/radeon_encoders.c | 6 ++---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 8b3d8ed52ff6..8c9a8115b632 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1057,7 +1057,7 @@ static int radeon_dvi_mode_valid(struct drm_connector *connector, (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B)) return MODE_OK; else if (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_A) { - if (ASIC_IS_DCE3(rdev)) { + if (0) { /* HDMI 1.3+ supports max clock of 340 Mhz */ if (mode->clock > 340000) return MODE_CLOCK_HIGH; diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 9419c51bcf50..26e92708d114 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -307,8 +307,6 @@ void radeon_panel_mode_fixup(struct drm_encoder *encoder, bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder, u32 pixel_clock) { - struct drm_device *dev = encoder->dev; - struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *dig_connector; @@ -326,7 +324,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder, case DRM_MODE_CONNECTOR_HDMIB: if (radeon_connector->use_digital) { /* HDMI 1.3 supports up to 340 Mhz over single link */ - if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) { + if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) { if (pixel_clock > 340000) return true; else @@ -348,7 +346,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder, return false; else { /* HDMI 1.3 supports up to 340 Mhz over single link */ - if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) { + if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) { if (pixel_clock > 340000) return true; else -- cgit v1.2.1 From 6b7f000eb6a0b81d7a809833edb7a457eedf8512 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 8 Mar 2012 08:58:13 +0000 Subject: x86/amd: iommu_set_device_table() must not be __init This function is called from enable_iommus(), which in turn is used from amd_iommu_resume(). Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index bdea288dc185..a35e98ad9725 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -275,7 +275,7 @@ static void iommu_set_exclusion_range(struct amd_iommu *iommu) } /* Programs the physical address of the device table into the IOMMU hardware */ -static void __init iommu_set_device_table(struct amd_iommu *iommu) +static void iommu_set_device_table(struct amd_iommu *iommu) { u64 entry; -- cgit v1.2.1 From 8de5d6f19bbe7c77676a62ab52be901aa10d6b54 Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Thu, 8 Mar 2012 15:38:04 +0100 Subject: ALSA: hdspm - Provide ioctl_compat snd_hdspm uses its own ioctls to acquire config- and status information. Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdspm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index cc9f6c83d661..bc030a2088da 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6333,6 +6333,7 @@ static int __devinit snd_hdspm_create_hwdep(struct snd_card *card, hw->ops.open = snd_hdspm_hwdep_dummy_op; hw->ops.ioctl = snd_hdspm_hwdep_ioctl; + hw->ops.ioctl_compat = snd_hdspm_hwdep_ioctl; hw->ops.release = snd_hdspm_hwdep_dummy_op; return 0; -- cgit v1.2.1 From 48546cc0a5c2deac67c9a3cafa3889871b25a4c0 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 8 Mar 2012 01:48:36 -0800 Subject: ARM: S3C2440: Fixed build error for s3c244x Fixed following: arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart': arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1 make: *** [arch/arm/mach-s3c24xx] Error 2 Signed-off-by: Kukjin Kim Signed-off-by: Olof Johansson --- arch/arm/mach-s3c2440/s3c244x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 744930a870eb..d15852f642b7 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -207,3 +207,4 @@ void s3c244x_restart(char mode, const char *cmd) /* we'll take a jump through zero as a poor second */ soft_restart(0); +} -- cgit v1.2.1 From 4647ca5761f5534470e98d06494403a2fd0d7b32 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 8 Mar 2012 10:20:14 -0800 Subject: ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Found few more with randconfig generated .configs: In file included from arch/arm/mach-omap2/prm-regbits-34xx.h:17, from arch/arm/mach-omap2/vc.c:18: arch/arm/mach-omap2/prm2xxx_3xxx.h: In function ‘omap2_prm_read_mod_reg’: arch/arm/mach-omap2/prm2xxx_3xxx.h:239: error: implicit declaration of function ‘WARN’ In file included from arch/arm/mach-omap2/powerdomain44xx.c:22: arch/arm/mach-omap2/prm2xxx_3xxx.h: In function ‘omap2_prm_read_mod_reg’: arch/arm/mach-omap2/prm2xxx_3xxx.h:239: error: implicit declaration of function ‘WARN’ This is because omap2_prm functions are currently just stubs for omap4 only builds. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/powerdomain44xx.c | 1 + arch/arm/mach-omap2/vc.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c index a7880af4b3d9..601325b852a4 100644 --- a/arch/arm/mach-omap2/powerdomain44xx.c +++ b/arch/arm/mach-omap2/powerdomain44xx.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "powerdomain.h" #include diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 175b7d86d86a..84da34f9a7cf 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -10,6 +10,7 @@ #include #include #include +#include #include -- cgit v1.2.1 From d31b20fcc89efa8c5d3f5ea2720e08a286b69a36 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Wed, 7 Mar 2012 10:02:00 +0000 Subject: net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver Signed-off-by: Haiyang Zhang Signed-off-by: K. Y. Srinivasan Cc: Olaf Hering Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 466c58a7353d..bf01841bda5b 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -313,7 +313,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, static void netvsc_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { - strcpy(info->driver, "hv_netvsc"); + strcpy(info->driver, KBUILD_MODNAME); strcpy(info->version, HV_DRV_VERSION); strcpy(info->fw_version, "N/A"); } @@ -485,7 +485,7 @@ MODULE_DEVICE_TABLE(vmbus, id_table); /* The one and only one */ static struct hv_driver netvsc_drv = { - .name = "netvsc", + .name = KBUILD_MODNAME, .id_table = id_table, .probe = netvsc_probe, .remove = netvsc_remove, -- cgit v1.2.1 From 8cd5c8661df33674daa67bf552a73497eeeba710 Mon Sep 17 00:00:00 2001 From: David Brown Date: Fri, 9 Mar 2012 11:39:32 -0800 Subject: MAINTAINERS: new git entry for arm/mach-msm The msm git tree moved to git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git Signed-off-by: David Brown Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index b087b3bca290..3321d75c6c7f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -962,7 +962,7 @@ F: drivers/tty/serial/msm_serial.c F: drivers/platform/msm/ F: drivers/*/pm8???-* F: include/linux/mfd/pm8xxx/ -T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git S: Maintained ARM/TOSA MACHINE SUPPORT -- cgit v1.2.1 From a7f4255f906f60f72e00aad2fb000939449ff32e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 9 Mar 2012 20:55:10 +0100 Subject: x86: Derandom delay_tsc for 64 bit Commit f0fbf0abc093 ("x86: integrate delay functions") converted delay_tsc() into a random delay generator for 64 bit. The reason is that it merged the mostly identical versions of delay_32.c and delay_64.c. Though the subtle difference of the result was: static void delay_tsc(unsigned long loops) { - unsigned bclock, now; + unsigned long bclock, now; Now the function uses rdtscl() which returns the lower 32bit of the TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64 bit this fails when the lower 32bit are close to wrap around when bclock is read, because the following check if ((now - bclock) >= loops) break; evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0 because the unsigned long (now - bclock) of these values results in 0xffffffff00000001 which is definitely larger than the loops value. That explains Tvortkos observation: "Because I am seeing udelay(500) (_occasionally_) being short, and that by delaying for some duration between 0us (yep) and 491us." Make those variables explicitely u32 again, so this works for both 32 and 64 bit. Reported-by: Tvrtko Ursulin Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org # >= 2.6.27 Signed-off-by: Linus Torvalds --- arch/x86/lib/delay.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c index fc45ba887d05..e395693abdb1 100644 --- a/arch/x86/lib/delay.c +++ b/arch/x86/lib/delay.c @@ -48,9 +48,9 @@ static void delay_loop(unsigned long loops) } /* TSC based delay: */ -static void delay_tsc(unsigned long loops) +static void delay_tsc(unsigned long __loops) { - unsigned long bclock, now; + u32 bclock, now, loops = __loops; int cpu; preempt_disable(); -- cgit v1.2.1 From be22aece684f5a700e6247b9861c3759d5798a3c Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 9 Mar 2012 13:37:32 -0800 Subject: memcg: revert fix to mapcount check for this release Respectfully revert commit e6ca7b89dc76 "memcg: fix mapcount check in move charge code for anonymous page" for the 3.3 release, so that it behaves exactly like releases 2.6.35 through 3.2 in this respect. Horiguchi-san's commit is correct in itself, 1 makes much more sense than 2 in that check; but it does not go far enough - swapcount should be considered too - if we really want such a check at all. We appear to have reached agreement now, and expect that 3.4 will remove the mapcount check, but had better not make 3.3 different. Signed-off-by: Hugh Dickins Reviewed-by: Naoya Horiguchi Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 5585dc3d3646..d0e57a3cda18 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5075,7 +5075,7 @@ static struct page *mc_handle_present_pte(struct vm_area_struct *vma, return NULL; if (PageAnon(page)) { /* we don't move shared anon */ - if (!move_anon() || page_mapcount(page) > 1) + if (!move_anon() || page_mapcount(page) > 2) return NULL; } else if (!move_file()) /* we ignore mapcount for file pages */ -- cgit v1.2.1 From 86b62a2cb4fc09037bbce2959d2992962396fd7f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 7 Mar 2012 05:16:35 +0000 Subject: aio: fix io_setup/io_destroy race Have ioctx_alloc() return an extra reference, so that caller would drop it on success and not bother with re-grabbing it on failure exit. The current code is obviously broken - io_destroy() from another thread that managed to guess the address io_setup() would've returned would free ioctx right under us; gets especially interesting if aio_context_t * we pass to io_setup() points to PROT_READ mapping, so put_user() fails and we end up doing io_destroy() on kioctx another thread has just got freed... Signed-off-by: Al Viro Acked-by: Benjamin LaHaise Reviewed-by: Jeff Moyer Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/aio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index 67e4b9047cc9..f6578cb22d00 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -273,7 +273,7 @@ static struct kioctx *ioctx_alloc(unsigned nr_events) mm = ctx->mm = current->mm; atomic_inc(&mm->mm_count); - atomic_set(&ctx->users, 1); + atomic_set(&ctx->users, 2); spin_lock_init(&ctx->ctx_lock); spin_lock_init(&ctx->ring_info.ring_lock); init_waitqueue_head(&ctx->wait); @@ -1338,10 +1338,10 @@ SYSCALL_DEFINE2(io_setup, unsigned, nr_events, aio_context_t __user *, ctxp) ret = PTR_ERR(ioctx); if (!IS_ERR(ioctx)) { ret = put_user(ioctx->user_id, ctxp); - if (!ret) + if (!ret) { + put_ioctx(ioctx); return 0; - - get_ioctx(ioctx); /* io_destroy() expects us to hold a ref */ + } io_destroy(ioctx); } -- cgit v1.2.1 From c7b285550544c22bc005ec20978472c9ac7138c6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Mar 2012 17:51:19 +0000 Subject: aio: fix the "too late munmap()" race Current code has put_ioctx() called asynchronously from aio_fput_routine(); that's done *after* we have killed the request that used to pin ioctx, so there's nothing to stop io_destroy() waiting in wait_for_all_aios() from progressing. As the result, we can end up with async call of put_ioctx() being the last one and possibly happening during exit_mmap() or elf_core_dump(), neither of which expects stray munmap() being done to them... We do need to prevent _freeing_ ioctx until aio_fput_routine() is done with that, but that's all we care about - neither io_destroy() nor exit_aio() will progress past wait_for_all_aios() until aio_fput_routine() does really_put_req(), so the ioctx teardown won't be done until then and we don't care about the contents of ioctx past that point. Since actual freeing of these suckers is RCU-delayed, we don't need to bump ioctx refcount when request goes into list for async removal. All we need is rcu_read_lock held just over the ->ctx_lock-protected area in aio_fput_routine(). Signed-off-by: Al Viro Reviewed-by: Jeff Moyer Acked-by: Benjamin LaHaise Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/aio.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index f6578cb22d00..b9d64d89a043 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -228,12 +228,6 @@ static void __put_ioctx(struct kioctx *ctx) call_rcu(&ctx->rcu_head, ctx_rcu_free); } -static inline void get_ioctx(struct kioctx *kioctx) -{ - BUG_ON(atomic_read(&kioctx->users) <= 0); - atomic_inc(&kioctx->users); -} - static inline int try_get_ioctx(struct kioctx *kioctx) { return atomic_inc_not_zero(&kioctx->users); @@ -609,11 +603,16 @@ static void aio_fput_routine(struct work_struct *data) fput(req->ki_filp); /* Link the iocb into the context's free list */ + rcu_read_lock(); spin_lock_irq(&ctx->ctx_lock); really_put_req(ctx, req); + /* + * at that point ctx might've been killed, but actual + * freeing is RCU'd + */ spin_unlock_irq(&ctx->ctx_lock); + rcu_read_unlock(); - put_ioctx(ctx); spin_lock_irq(&fput_lock); } spin_unlock_irq(&fput_lock); @@ -644,7 +643,6 @@ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req) * this function will be executed w/out any aio kthread wakeup. */ if (unlikely(!fput_atomic(req->ki_filp))) { - get_ioctx(ctx); spin_lock(&fput_lock); list_add(&req->ki_list, &fput_head); spin_unlock(&fput_lock); -- cgit v1.2.1 From fde7d9049e55ab85a390be7f415d74c9f62dd0f9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 10 Mar 2012 13:49:52 -0800 Subject: Linux 3.3-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 66d13c917bc7..56d481727c30 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v1.2.1 From d870df6827d883e213811cdcc3f8d3b64dfa8ff8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 8 Mar 2012 20:36:44 +0100 Subject: ARM: davinci: cpufreq: fix compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes: arch/arm/mach-davinci/cpufreq.c: In function davinci_target: arch/arm/mach-davinci/cpufreq.c:98: warning: passing argument 2 of dev_printk from incompatible pointer type Signed-off-by: Uwe Kleine-König Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 5bba7070f271..031048fec9f5 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -95,7 +95,7 @@ static int davinci_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return ret; - dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); + dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); ret = cpufreq_frequency_table_target(policy, pdata->freq_table, freqs.new, relation, &idx); -- cgit v1.2.1 From 30c766bdeccf945615097ca185326c1d7199f023 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 7 Mar 2012 23:03:56 +0100 Subject: ARM: davinci: DA850: move da850_register_pm to .init.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All callers (board-mityomapl138.c and board-da850-evm.c) use it in __init functions only. This fixes: WARNING: vmlinux.o(.text+0xd664): Section mismatch in reference from the function da850_register_pm() to the function .init.text:da8xx_get_mem_ctlr() The function da850_register_pm() references the function __init da8xx_get_mem_ctlr(). This is often because da850_register_pm lacks a __init annotation or the annotation of da8xx_get_mem_ctlr is wrong. Signed-off-by: Uwe Kleine-König Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/da850.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 992c4c410185..b44dc844e15e 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1026,7 +1026,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate) } #endif -int da850_register_pm(struct platform_device *pdev) +int __init da850_register_pm(struct platform_device *pdev) { int ret; struct davinci_pm_config *pdata = pdev->dev.platform_data; -- cgit v1.2.1 From 1dde9f75b658edcd4fb7e00259206d727702ce61 Mon Sep 17 00:00:00 2001 From: Mehnert Date: Tue, 13 Mar 2012 12:13:51 +0100 Subject: iomux-mx25.h slew rate adjusted for LCD __LD pins For some reason (sadly i don't identifying the patch right now) two LCD data lines configured PAD_CTL_SRE_SLOW (wrong slew rate) since Kernel 3.1. MX25_PAD_GPIO_E__LD16 and MX25_PAD_GPIO_F__LD17 This results in an fauly behaviour and strange color effects. To ensure that all LCD data pins configured with the proper slew rate, this patch changes to IOMUX define of all LCD __LDxx pins to PAD_CTL_SRE_FAST. This problem may affect other mx25 platforms like mx25pdk. Sadly i can't test it. Of course this problem shouldn't occur when you done your LCD muxing correctly in the bootloader. Best regards, Torsten Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx25.h | 42 ++++++++++++++--------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index f0726d48df22..c61ec0fc10d4 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -139,15 +139,15 @@ #define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL) @@ -192,54 +192,54 @@ #define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL) #define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL) #define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) -#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) -#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) -#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) -#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) #define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) @@ -468,11 +468,11 @@ #define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) -- cgit v1.2.1