From d7e34d12ba877fa77080257d2621c29769333c40 Mon Sep 17 00:00:00 2001 From: Benson Leung Date: Wed, 9 Jan 2013 16:25:11 -0800 Subject: Input: add driver for Cypress APA I2C Trackpad This patch introduces a driver for Cypress All Points Addressable I2C Trackpad, including the ones in 2012 Samsung Chromebooks. This device is compatible with MT protocol type B, providing identifiable contacts. Signed-off-by: Dudley Du Signed-off-by: Daniel Kurtz Signed-off-by: Benson Leung Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/Kconfig | 12 + drivers/input/mouse/Makefile | 1 + drivers/input/mouse/cyapa.c | 804 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 817 insertions(+) create mode 100644 drivers/input/mouse/cyapa.c diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 88954ddae6d9..802bd6a72d73 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -203,6 +203,18 @@ config MOUSE_BCM5974 To compile this driver as a module, choose M here: the module will be called bcm5974. +config MOUSE_CYAPA + tristate "Cypress APA I2C Trackpad support" + depends on I2C + help + This driver adds support for Cypress All Points Addressable (APA) + I2C Trackpads, including the ones used in 2012 Samsung Chromebooks. + + Say Y here if you have a Cypress APA I2C Trackpad. + + To compile this driver as a module, choose M here: the module will be + called cyapa. + config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" depends on ISA diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 323e352189ba..c25efdb3f288 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o +obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c new file mode 100644 index 000000000000..1a14688329be --- /dev/null +++ b/drivers/input/mouse/cyapa.c @@ -0,0 +1,804 @@ +/* + * Cypress APA trackpad with I2C interface + * + * Author: Dudley Du + * Further cleanup and restructuring by: + * Daniel Kurtz + * Benson Leung + * + * Copyright (C) 2011-2012 Cypress Semiconductor, Inc. + * Copyright (C) 2011-2012 Google, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* APA trackpad firmware generation */ +#define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */ + +#define CYAPA_NAME "Cypress APA Trackpad (cyapa)" + +/* commands for read/write registers of Cypress trackpad */ +#define CYAPA_CMD_SOFT_RESET 0x00 +#define CYAPA_CMD_POWER_MODE 0x01 +#define CYAPA_CMD_DEV_STATUS 0x02 +#define CYAPA_CMD_GROUP_DATA 0x03 +#define CYAPA_CMD_GROUP_CMD 0x04 +#define CYAPA_CMD_GROUP_QUERY 0x05 +#define CYAPA_CMD_BL_STATUS 0x06 +#define CYAPA_CMD_BL_HEAD 0x07 +#define CYAPA_CMD_BL_CMD 0x08 +#define CYAPA_CMD_BL_DATA 0x09 +#define CYAPA_CMD_BL_ALL 0x0a +#define CYAPA_CMD_BLK_PRODUCT_ID 0x0b +#define CYAPA_CMD_BLK_HEAD 0x0c + +/* report data start reg offset address. */ +#define DATA_REG_START_OFFSET 0x0000 + +#define BL_HEAD_OFFSET 0x00 +#define BL_DATA_OFFSET 0x10 + +/* + * Operational Device Status Register + * + * bit 7: Valid interrupt source + * bit 6 - 4: Reserved + * bit 3 - 2: Power status + * bit 1 - 0: Device status + */ +#define REG_OP_STATUS 0x00 +#define OP_STATUS_SRC 0x80 +#define OP_STATUS_POWER 0x0c +#define OP_STATUS_DEV 0x03 +#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV) + +/* + * Operational Finger Count/Button Flags Register + * + * bit 7 - 4: Number of touched finger + * bit 3: Valid data + * bit 2: Middle Physical Button + * bit 1: Right Physical Button + * bit 0: Left physical Button + */ +#define REG_OP_DATA1 0x01 +#define OP_DATA_VALID 0x08 +#define OP_DATA_MIDDLE_BTN 0x04 +#define OP_DATA_RIGHT_BTN 0x02 +#define OP_DATA_LEFT_BTN 0x01 +#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \ + OP_DATA_LEFT_BTN) + +/* + * Bootloader Status Register + * + * bit 7: Busy + * bit 6 - 5: Reserved + * bit 4: Bootloader running + * bit 3 - 1: Reserved + * bit 0: Checksum valid + */ +#define REG_BL_STATUS 0x01 +#define BL_STATUS_BUSY 0x80 +#define BL_STATUS_RUNNING 0x10 +#define BL_STATUS_DATA_VALID 0x08 +#define BL_STATUS_CSUM_VALID 0x01 + +/* + * Bootloader Error Register + * + * bit 7: Invalid + * bit 6: Invalid security key + * bit 5: Bootloading + * bit 4: Command checksum + * bit 3: Flash protection error + * bit 2: Flash checksum error + * bit 1 - 0: Reserved + */ +#define REG_BL_ERROR 0x02 +#define BL_ERROR_INVALID 0x80 +#define BL_ERROR_INVALID_KEY 0x40 +#define BL_ERROR_BOOTLOADING 0x20 +#define BL_ERROR_CMD_CSUM 0x10 +#define BL_ERROR_FLASH_PROT 0x08 +#define BL_ERROR_FLASH_CSUM 0x04 + +#define BL_STATUS_SIZE 3 /* length of bootloader status registers */ +#define BLK_HEAD_BYTES 32 + +#define PRODUCT_ID_SIZE 16 +#define QUERY_DATA_SIZE 27 +#define REG_PROTOCOL_GEN_QUERY_OFFSET 20 + +#define REG_OFFSET_DATA_BASE 0x0000 +#define REG_OFFSET_COMMAND_BASE 0x0028 +#define REG_OFFSET_QUERY_BASE 0x002a + +#define CAPABILITY_LEFT_BTN_MASK (0x01 << 3) +#define CAPABILITY_RIGHT_BTN_MASK (0x01 << 4) +#define CAPABILITY_MIDDLE_BTN_MASK (0x01 << 5) +#define CAPABILITY_BTN_MASK (CAPABILITY_LEFT_BTN_MASK | \ + CAPABILITY_RIGHT_BTN_MASK | \ + CAPABILITY_MIDDLE_BTN_MASK) + +#define CYAPA_OFFSET_SOFT_RESET REG_OFFSET_COMMAND_BASE + +#define REG_OFFSET_POWER_MODE (REG_OFFSET_COMMAND_BASE + 1) + +#define PWR_MODE_MASK 0xfc +#define PWR_MODE_FULL_ACTIVE (0x3f << 2) +#define PWR_MODE_IDLE (0x05 << 2) /* default sleep time is 50 ms. */ +#define PWR_MODE_OFF (0x00 << 2) + +#define PWR_STATUS_MASK 0x0c +#define PWR_STATUS_ACTIVE (0x03 << 2) +#define PWR_STATUS_IDLE (0x02 << 2) +#define PWR_STATUS_OFF (0x00 << 2) + +/* + * CYAPA trackpad device states. + * Used in register 0x00, bit1-0, DeviceStatus field. + * Other values indicate device is in an abnormal state and must be reset. + */ +#define CYAPA_DEV_NORMAL 0x03 +#define CYAPA_DEV_BUSY 0x01 + +enum cyapa_state { + CYAPA_STATE_OP, + CYAPA_STATE_BL_IDLE, + CYAPA_STATE_BL_ACTIVE, + CYAPA_STATE_BL_BUSY, + CYAPA_STATE_NO_DEVICE, +}; + + +struct cyapa_touch { + /* + * high bits or x/y position value + * bit 7 - 4: high 4 bits of x position value + * bit 3 - 0: high 4 bits of y position value + */ + u8 xy_hi; + u8 x_lo; /* low 8 bits of x position value. */ + u8 y_lo; /* low 8 bits of y position value. */ + u8 pressure; + /* id range is 1 - 15. It is incremented with every new touch. */ + u8 id; +} __packed; + +/* The touch.id is used as the MT slot id, thus max MT slot is 15 */ +#define CYAPA_MAX_MT_SLOTS 15 + +struct cyapa_reg_data { + /* + * bit 0 - 1: device status + * bit 3 - 2: power mode + * bit 6 - 4: reserved + * bit 7: interrupt valid bit + */ + u8 device_status; + /* + * bit 7 - 4: number of fingers currently touching pad + * bit 3: valid data check bit + * bit 2: middle mechanism button state if exists + * bit 1: right mechanism button state if exists + * bit 0: left mechanism button state if exists + */ + u8 finger_btn; + /* CYAPA reports up to 5 touches per packet. */ + struct cyapa_touch touches[5]; +} __packed; + +/* The main device structure */ +struct cyapa { + enum cyapa_state state; + + struct i2c_client *client; + struct input_dev *input; + char phys[32]; /* device physical location */ + int irq; + bool irq_wake; /* irq wake is enabled */ + + /* read from query data region. */ + char product_id[16]; + u8 btn_capability; + u8 gen; + int max_abs_x; + int max_abs_y; + int physical_size_x; + int physical_size_y; +}; + +static const u8 bl_deactivate[] = { 0x00, 0xff, 0x3b, 0x00, 0x01, 0x02, 0x03, + 0x04, 0x05, 0x06, 0x07 }; +static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04, + 0x05, 0x06, 0x07 }; + +struct cyapa_cmd_len { + u8 cmd; + u8 len; +}; + +static const struct cyapa_cmd_len cyapa_i2c_cmds[] = { + { CYAPA_OFFSET_SOFT_RESET, 1 }, + { REG_OFFSET_COMMAND_BASE + 1, 1 }, + { REG_OFFSET_DATA_BASE, 1 }, + { REG_OFFSET_DATA_BASE, sizeof(struct cyapa_reg_data) }, + { REG_OFFSET_COMMAND_BASE, 0 }, + { REG_OFFSET_QUERY_BASE, QUERY_DATA_SIZE }, + { BL_HEAD_OFFSET, 3 }, + { BL_HEAD_OFFSET, 16 }, + { BL_HEAD_OFFSET, 16 }, + { BL_DATA_OFFSET, 16 }, + { BL_HEAD_OFFSET, 32 }, + { REG_OFFSET_QUERY_BASE, PRODUCT_ID_SIZE }, + { REG_OFFSET_DATA_BASE, 32 } +}; + +static ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len, + u8 *values) +{ + return i2c_smbus_read_i2c_block_data(cyapa->client, reg, len, values); +} + +static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg, + size_t len, const u8 *values) +{ + return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values); +} + +static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx) +{ + u8 cmd = cyapa_i2c_cmds[cmd_idx].cmd; + + return i2c_smbus_read_byte_data(cyapa->client, cmd); +} + +static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value) +{ + u8 cmd = cyapa_i2c_cmds[cmd_idx].cmd; + + return i2c_smbus_write_byte_data(cyapa->client, cmd, value); +} + +static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values) +{ + u8 cmd = cyapa_i2c_cmds[cmd_idx].cmd; + size_t len = cyapa_i2c_cmds[cmd_idx].len; + + return cyapa_i2c_reg_read_block(cyapa, cmd, len, values); +} + +/* + * Query device for its current operating state. + * + */ +static int cyapa_get_state(struct cyapa *cyapa) +{ + int ret; + u8 status[BL_STATUS_SIZE]; + + cyapa->state = CYAPA_STATE_NO_DEVICE; + + /* + * Get trackpad status by reading 3 registers starting from 0. + * If the device is in the bootloader, this will be BL_HEAD. + * If the device is in operation mode, this will be the DATA regs. + * + */ + ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE, + status); + if (ret != BL_STATUS_SIZE) + goto error; + + if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) { + switch (status[REG_OP_STATUS] & OP_STATUS_DEV) { + case CYAPA_DEV_NORMAL: + case CYAPA_DEV_BUSY: + cyapa->state = CYAPA_STATE_OP; + break; + default: + ret = -EAGAIN; + goto error; + } + } else { + if (status[REG_BL_STATUS] & BL_STATUS_BUSY) + cyapa->state = CYAPA_STATE_BL_BUSY; + else if (status[REG_BL_ERROR] & BL_ERROR_BOOTLOADING) + cyapa->state = CYAPA_STATE_BL_ACTIVE; + else + cyapa->state = CYAPA_STATE_BL_IDLE; + } + + return 0; +error: + return (ret < 0) ? ret : -EAGAIN; +} + +/* + * Poll device for its status in a loop, waiting up to timeout for a response. + * + * When the device switches state, it usually takes ~300 ms. + * However, when running a new firmware image, the device must calibrate its + * sensors, which can take as long as 2 seconds. + * + * Note: The timeout has granularity of the polling rate, which is 100 ms. + * + * Returns: + * 0 when the device eventually responds with a valid non-busy state. + * -ETIMEDOUT if device never responds (too many -EAGAIN) + * < 0 other errors + */ +static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout) +{ + int ret; + int tries = timeout / 100; + + ret = cyapa_get_state(cyapa); + while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) { + msleep(100); + ret = cyapa_get_state(cyapa); + } + return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret; +} + +static int cyapa_bl_deactivate(struct cyapa *cyapa) +{ + int ret; + + ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate), + bl_deactivate); + if (ret < 0) + return ret; + + /* wait for bootloader to switch to idle state; should take < 100ms */ + msleep(100); + ret = cyapa_poll_state(cyapa, 500); + if (ret < 0) + return ret; + if (cyapa->state != CYAPA_STATE_BL_IDLE) + return -EAGAIN; + return 0; +} + +/* + * Exit bootloader + * + * Send bl_exit command, then wait 50 - 100 ms to let device transition to + * operational mode. If this is the first time the device's firmware is + * running, it can take up to 2 seconds to calibrate its sensors. So, poll + * the device's new state for up to 2 seconds. + * + * Returns: + * -EIO failure while reading from device + * -EAGAIN device is stuck in bootloader, b/c it has invalid firmware + * 0 device is supported and in operational mode + */ +static int cyapa_bl_exit(struct cyapa *cyapa) +{ + int ret; + + ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit); + if (ret < 0) + return ret; + + /* + * Wait for bootloader to exit, and operation mode to start. + * Normally, this takes at least 50 ms. + */ + usleep_range(50000, 100000); + /* + * In addition, when a device boots for the first time after being + * updated to new firmware, it must first calibrate its sensors, which + * can take up to an additional 2 seconds. + */ + ret = cyapa_poll_state(cyapa, 2000); + if (ret < 0) + return ret; + if (cyapa->state != CYAPA_STATE_OP) + return -EAGAIN; + + return 0; +} + +/* + * Set device power mode + * + */ +static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode) +{ + struct device *dev = &cyapa->client->dev; + int ret; + u8 power; + + if (cyapa->state != CYAPA_STATE_OP) + return 0; + + ret = cyapa_read_byte(cyapa, CYAPA_CMD_POWER_MODE); + if (ret < 0) + return ret; + + power = ret & ~PWR_MODE_MASK; + power |= power_mode & PWR_MODE_MASK; + ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power); + if (ret < 0) + dev_err(dev, "failed to set power_mode 0x%02x err = %d\n", + power_mode, ret); + return ret; +} + +static int cyapa_get_query_data(struct cyapa *cyapa) +{ + u8 query_data[QUERY_DATA_SIZE]; + int ret; + + if (cyapa->state != CYAPA_STATE_OP) + return -EBUSY; + + ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_QUERY, query_data); + if (ret < 0) + return ret; + if (ret != QUERY_DATA_SIZE) + return -EIO; + + memcpy(&cyapa->product_id[0], &query_data[0], 5); + cyapa->product_id[5] = '-'; + memcpy(&cyapa->product_id[6], &query_data[5], 6); + cyapa->product_id[12] = '-'; + memcpy(&cyapa->product_id[13], &query_data[11], 2); + cyapa->product_id[15] = '\0'; + + cyapa->btn_capability = query_data[19] & CAPABILITY_BTN_MASK; + + cyapa->gen = query_data[20] & 0x0f; + + cyapa->max_abs_x = ((query_data[21] & 0xf0) << 4) | query_data[22]; + cyapa->max_abs_y = ((query_data[21] & 0x0f) << 8) | query_data[23]; + + cyapa->physical_size_x = + ((query_data[24] & 0xf0) << 4) | query_data[25]; + cyapa->physical_size_y = + ((query_data[24] & 0x0f) << 8) | query_data[26]; + + return 0; +} + +/* + * Check if device is operational. + * + * An operational device is responding, has exited bootloader, and has + * firmware supported by this driver. + * + * Returns: + * -EBUSY no device or in bootloader + * -EIO failure while reading from device + * -EAGAIN device is still in bootloader + * if ->state = CYAPA_STATE_BL_IDLE, device has invalid firmware + * -EINVAL device is in operational mode, but not supported by this driver + * 0 device is supported + */ +static int cyapa_check_is_operational(struct cyapa *cyapa) +{ + struct device *dev = &cyapa->client->dev; + static const char unique_str[] = "CYTRA"; + int ret; + + ret = cyapa_poll_state(cyapa, 2000); + if (ret < 0) + return ret; + switch (cyapa->state) { + case CYAPA_STATE_BL_ACTIVE: + ret = cyapa_bl_deactivate(cyapa); + if (ret) + return ret; + + /* Fallthrough state */ + case CYAPA_STATE_BL_IDLE: + ret = cyapa_bl_exit(cyapa); + if (ret) + return ret; + + /* Fallthrough state */ + case CYAPA_STATE_OP: + ret = cyapa_get_query_data(cyapa); + if (ret < 0) + return ret; + + /* only support firmware protocol gen3 */ + if (cyapa->gen != CYAPA_GEN3) { + dev_err(dev, "unsupported protocol version (%d)", + cyapa->gen); + return -EINVAL; + } + + /* only support product ID starting with CYTRA */ + if (memcmp(cyapa->product_id, unique_str, + sizeof(unique_str) - 1) != 0) { + dev_err(dev, "unsupported product ID (%s)\n", + cyapa->product_id); + return -EINVAL; + } + return 0; + + default: + return -EIO; + } + return 0; +} + +static irqreturn_t cyapa_irq(int irq, void *dev_id) +{ + struct cyapa *cyapa = dev_id; + struct device *dev = &cyapa->client->dev; + struct input_dev *input = cyapa->input; + struct cyapa_reg_data data; + int i; + int ret; + int num_fingers; + + if (device_may_wakeup(dev)) + pm_wakeup_event(dev, 0); + + ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data); + if (ret != sizeof(data)) + goto out; + + if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC || + (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL || + (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) { + goto out; + } + + num_fingers = (data.finger_btn >> 4) & 0x0f; + for (i = 0; i < num_fingers; i++) { + const struct cyapa_touch *touch = &data.touches[i]; + /* Note: touch->id range is 1 to 15; slots are 0 to 14. */ + int slot = touch->id - 1; + + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, + ((touch->xy_hi & 0xf0) << 4) | touch->x_lo); + input_report_abs(input, ABS_MT_POSITION_Y, + ((touch->xy_hi & 0x0f) << 8) | touch->y_lo); + input_report_abs(input, ABS_MT_PRESSURE, touch->pressure); + } + + input_mt_sync_frame(input); + + if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK) + input_report_key(input, BTN_LEFT, + data.finger_btn & OP_DATA_LEFT_BTN); + + if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK) + input_report_key(input, BTN_MIDDLE, + data.finger_btn & OP_DATA_MIDDLE_BTN); + + if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK) + input_report_key(input, BTN_RIGHT, + data.finger_btn & OP_DATA_RIGHT_BTN); + + input_sync(input); + +out: + return IRQ_HANDLED; +} + +static int cyapa_create_input_dev(struct cyapa *cyapa) +{ + struct device *dev = &cyapa->client->dev; + int ret; + struct input_dev *input; + + if (!cyapa->physical_size_x || !cyapa->physical_size_y) + return -EINVAL; + + input = cyapa->input = input_allocate_device(); + if (!input) { + dev_err(dev, "allocate memory for input device failed\n"); + return -ENOMEM; + } + + input->name = CYAPA_NAME; + input->phys = cyapa->phys; + input->id.bustype = BUS_I2C; + input->id.version = 1; + input->id.product = 0; /* means any product in eventcomm. */ + input->dev.parent = &cyapa->client->dev; + + input_set_drvdata(input, cyapa); + + __set_bit(EV_ABS, input->evbit); + + /* finger position */ + input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0, + 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0, + 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0); + + input_abs_set_res(input, ABS_MT_POSITION_X, + cyapa->max_abs_x / cyapa->physical_size_x); + input_abs_set_res(input, ABS_MT_POSITION_Y, + cyapa->max_abs_y / cyapa->physical_size_y); + + if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK) + __set_bit(BTN_LEFT, input->keybit); + if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK) + __set_bit(BTN_MIDDLE, input->keybit); + if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK) + __set_bit(BTN_RIGHT, input->keybit); + + if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK) + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + + /* handle pointer emulation and unused slots in core */ + ret = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED); + if (ret) { + dev_err(dev, "allocate memory for MT slots failed, %d\n", ret); + goto err_free_device; + } + + /* Register the device in input subsystem */ + ret = input_register_device(input); + if (ret) { + dev_err(dev, "input device register failed, %d\n", ret); + goto err_free_device; + } + return 0; + +err_free_device: + input_free_device(input); + cyapa->input = NULL; + return ret; +} + +static int cyapa_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int ret; + struct cyapa *cyapa; + struct device *dev = &client->dev; + + cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL); + if (!cyapa) { + dev_err(dev, "allocate memory for cyapa failed\n"); + return -ENOMEM; + } + + cyapa->gen = CYAPA_GEN3; + cyapa->client = client; + i2c_set_clientdata(client, cyapa); + sprintf(cyapa->phys, "i2c-%d-%04x/input0", client->adapter->nr, + client->addr); + + cyapa->state = CYAPA_STATE_NO_DEVICE; + ret = cyapa_check_is_operational(cyapa); + if (ret) { + dev_err(dev, "device not operational, %d\n", ret); + goto err_mem_free; + } + + ret = cyapa_create_input_dev(cyapa); + if (ret) { + dev_err(dev, "create input_dev instance failed, %d\n", ret); + goto err_mem_free; + } + + ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); + if (ret) { + dev_err(dev, "set active power failed, %d\n", ret); + goto err_unregister_device; + } + + cyapa->irq = client->irq; + ret = request_threaded_irq(cyapa->irq, + NULL, + cyapa_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "cyapa", + cyapa); + if (ret) { + dev_err(dev, "IRQ request failed: %d\n, ", ret); + goto err_unregister_device; + } + + return 0; + +err_unregister_device: + input_unregister_device(cyapa->input); +err_mem_free: + kfree(cyapa); + + return ret; +} + +static int cyapa_remove(struct i2c_client *client) +{ + struct cyapa *cyapa = i2c_get_clientdata(client); + + free_irq(cyapa->irq, cyapa); + input_unregister_device(cyapa->input); + cyapa_set_power_mode(cyapa, PWR_MODE_OFF); + kfree(cyapa); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cyapa_suspend(struct device *dev) +{ + int ret; + u8 power_mode; + struct cyapa *cyapa = dev_get_drvdata(dev); + + disable_irq(cyapa->irq); + + /* + * Set trackpad device to idle mode if wakeup is allowed, + * otherwise turn off. + */ + power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE + : PWR_MODE_OFF; + ret = cyapa_set_power_mode(cyapa, power_mode); + if (ret < 0) + dev_err(dev, "set power mode failed, %d\n", ret); + + if (device_may_wakeup(dev)) + cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0); + return 0; +} + +static int cyapa_resume(struct device *dev) +{ + int ret; + struct cyapa *cyapa = dev_get_drvdata(dev); + + if (device_may_wakeup(dev) && cyapa->irq_wake) + disable_irq_wake(cyapa->irq); + + ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); + if (ret) + dev_warn(dev, "resume active power failed, %d\n", ret); + + enable_irq(cyapa->irq); + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(cyapa_pm_ops, cyapa_suspend, cyapa_resume); + +static const struct i2c_device_id cyapa_id_table[] = { + { "cyapa", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, cyapa_id_table); + +static struct i2c_driver cyapa_driver = { + .driver = { + .name = "cyapa", + .owner = THIS_MODULE, + .pm = &cyapa_pm_ops, + }, + + .probe = cyapa_probe, + .remove = cyapa_remove, + .id_table = cyapa_id_table, +}; + +module_i2c_driver(cyapa_driver); + +MODULE_DESCRIPTION("Cypress APA I2C Trackpad Driver"); +MODULE_AUTHOR("Dudley Du "); +MODULE_LICENSE("GPL"); -- cgit v1.2.1