From d66e35fab8789b5dd6f1b8e6f3871ea4f44d32a3 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Sun, 2 Apr 2006 16:58:38 +0100 Subject: [ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS board Patch from Pavel Pisa From: Stefano Fedrigo This adds to the MX1ADS platform the needed code to detect insertion/removal of an MMC/SD card. Tested on a v1.1 board. Signed-off-by: Stefano Fedrigo Signed-off-by: Pavel Pisa Acked-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-imx/mx1ads.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 8ab1b040288c..e34d0df90aed 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -25,6 +25,7 @@ #include #include +#include #include #include "generic.h" @@ -51,11 +52,28 @@ static struct platform_device *devices[] __initdata = { &cs89x0_device, }; +#ifdef CONFIG_MMC_IMX +static int mx1ads_mmc_card_present(void) +{ + /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ + return (SSR(1) & (1 << 20) ? 0 : 1); +} + +static struct imxmmc_platform_data mx1ads_mmc_info = { + .card_present = mx1ads_mmc_card_present, +}; +#endif + static void __init mx1ads_init(void) { #ifdef CONFIG_LEDS imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); +#endif +#ifdef CONFIG_MMC_IMX + /* SD/MMC card detect */ + imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); + imx_set_mmc_info(&mx1ads_mmc_info); #endif platform_add_devices(devices, ARRAY_SIZE(devices)); } -- cgit v1.2.1