From 9d2c7c75f889a3eefad016c71f651b0796e0a6e9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 8 Mar 2007 23:09:12 +0000 Subject: sata_sil: First step to removing ->post_set_mode Now that we have ata_do_set_mode() available for drivers to use we don't actually need ->post_set_mode() as the driver can wrap set_mode nicely and do stuff before or after (eg PCMCIA needs before), so we can kill off a method in all the structs While I was at it I added kernel-doc to the function involved. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 170d36e6260f..466b05b67115 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "sata_sil" -#define DRV_VERSION "2.1" +#define DRV_VERSION "2.2" enum { SIL_MMIO_BAR = 5, @@ -117,7 +117,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev); static void sil_dev_config(struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static void sil_post_set_mode (struct ata_port *ap); +static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed); static irqreturn_t sil_interrupt(int irq, void *dev_instance); static void sil_freeze(struct ata_port *ap); static void sil_thaw(struct ata_port *ap); @@ -197,7 +197,7 @@ static const struct ata_port_operations sil_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .post_set_mode = sil_post_set_mode, + .set_mode = sil_set_mode, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -297,7 +297,16 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) return cache_line; } -static void sil_post_set_mode (struct ata_port *ap) +/** + * sil_set_mode - wrap set_mode functions + * @ap: port to set up + * @r_failed: returned device when we fail + * + * Wrap the libata method for device setup as after the setup we need + * to inspect the results and do some configuration work + */ + +static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed) { struct ata_host *host = ap->host; struct ata_device *dev; @@ -305,6 +314,11 @@ static void sil_post_set_mode (struct ata_port *ap) void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; u32 tmp, dev_mode[2]; unsigned int i; + int rc; + + rc = ata_do_set_mode(ap, r_failed); + if (rc) + return rc; for (i = 0; i < 2; i++) { dev = &ap->device[i]; @@ -323,6 +337,7 @@ static void sil_post_set_mode (struct ata_port *ap) tmp |= (dev_mode[1] << 4); writel(tmp, addr); readl(addr); /* flush */ + return 0; } static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) -- cgit v1.2.1