From b462c20e2915e6eca2fb812b4f63c94e7e042b9a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 3 Nov 2011 16:15:37 +0900 Subject: ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA The conversion of the S3C64XX GPIOs to the generic Samsung GPIOs mean that rather than using the previous S3C24XX_GPIO_EXTRA configuration the driver now uses SAMSUNG_GPIO_EXTRA. Since SAMSUNG_GPIO_EXTRA requires the arch to include the extra space in ARCH_NR_GPIOs add it on to BOARD_NR_GPIOs (in case boards are relying on the existing reservation). Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/include/mach/gpio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h index 6e34c2f6e670..8b540c42d5dd 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -88,6 +88,6 @@ enum s3c_gpio_number { /* define the number of gpios we need to the one after the GPQ() range */ #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) -#define BOARD_NR_GPIOS 16 +#define BOARD_NR_GPIOS (16 + CONFIG_SAMSUNG_GPIO_EXTRA) #define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) -- cgit v1.2.1 From 4ff13995b512cfadef44e0bf5cb15298d6094519 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 3 Nov 2011 16:15:38 +0900 Subject: ARM: SAMSUNG: Fix GPIO space reservation for S3C64xx platforms The conversion to use SAMSUNG_GPIO_EXTRA rather than S3C24XX_GPIO_EXTRA broke a number of S3C64xx boards which had been using the symbols provided to reserve a range of GPIOs for board specific use. Fix this by adding equivalent symbols for the new shared driver and updating the relevant boards to use the new symbols. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/Kconfig | 6 +++--- arch/arm/plat-samsung/Kconfig | 8 ++++++++ 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 5552e048c2be..4d8c489edc04 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -188,7 +188,7 @@ config SMDK6410_WM1190_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM8350 - select S3C24XX_GPIO_EXTRA64 + select SAMSUNG_GPIO_EXTRA64 select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 @@ -206,7 +206,7 @@ config SMDK6410_WM1192_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM831X - select S3C24XX_GPIO_EXTRA64 + select SAMSUNG_GPIO_EXTRA64 select MFD_WM831X select MFD_WM831X_I2C help @@ -287,7 +287,7 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_WDT select S3C_DEV_RTC select S3C64XX_DEV_SPI - select S3C24XX_GPIO_EXTRA128 + select SAMSUNG_GPIO_EXTRA128 select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 313eb26cfa62..bb0af66bb487 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -88,12 +88,20 @@ config S5P_GPIO_DRVSTR config SAMSUNG_GPIO_EXTRA int "Number of additional GPIO pins" + default 128 if SAMSUNG_GPIO_EXTRA128 + default 64 if SAMSUNG_GPIO_EXTRA64 default 0 help Use additional GPIO space in addition to the GPIO's the SOC provides. This allows expanding the GPIO space for use with GPIO expanders. +config SAMSUNG_GPIO_EXTRA64 + bool + +config SAMSUNG_GPIO_EXTRA128 + bool + config S3C_GPIO_SPACE int "Space between gpio banks" default 0 -- cgit v1.2.1 From aaed44e1672c61b28dcae6e3d7bd5d15aef362f3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 3 Nov 2011 16:28:15 +0900 Subject: ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore The gpio_base for the PMIC on the CPU module was being incorrectly set to be the same as that for the CODEC causing the two GPIO drivers to collide. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/include/mach/crag6410.h | 3 ++- arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index be9074e17dfd..1cc1cc82e754 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -17,7 +17,8 @@ #define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) #define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) #define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) +#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) #endif diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d04b65448510..8b04a46e9f6d 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -500,7 +500,7 @@ static struct wm831x_touch_pdata touch_pdata __initdata = { static struct wm831x_pdata crag_pmic_pdata __initdata = { .wm831x_num = 1, .irq_base = BANFF_PMIC_IRQ_BASE, - .gpio_base = GPIO_BOARD_START + 8, + .gpio_base = BANFF_PMIC_GPIO_BASE, .backup = &banff_backup_pdata, -- cgit v1.2.1 From 8351c7aad45c15647903f70e30a5884258d25b95 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:29:07 +0900 Subject: ARM: S3C64XX: Raise the frequency of the second I2C bus on Cragganmore The S3C I2C driver defaults to a rather low 66kHz, ask for 400kHz for a bit of a speed boost. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 8b04a46e9f6d..d7245ccb99ac 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -634,6 +634,11 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, }; +static struct s3c2410_platform_i2c i2c1_pdata = { + .frequency = 400000, + .bus_num = 1, +}; + static void __init crag6410_map_io(void) { s3c64xx_init_io(NULL, 0); @@ -692,7 +697,7 @@ static void __init crag6410_machine_init(void) s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); s3c_i2c0_set_platdata(&i2c0_pdata); - s3c_i2c1_set_platdata(NULL); + s3c_i2c1_set_platdata(&i2c1_pdata); s3c_fb_set_platdata(&crag6410_lcd_pdata); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); -- cgit v1.2.1 From dcf3580a554757920c799364369a44bf0e6dc6f8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:29:07 +0900 Subject: ARM: S3C64XX: Use software initiated powerdown for Cragganmore Since the two PMICs are independent we initiate a shutdown on each. Signed-off-by: Mark Brown [kgene.kim@samsung.com: fix up conflict] Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d7245ccb99ac..bb81a9fc8221 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -501,6 +501,7 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = { .wm831x_num = 1, .irq_base = BANFF_PMIC_IRQ_BASE, .gpio_base = BANFF_PMIC_GPIO_BASE, + .soft_shutdown = true, .backup = &banff_backup_pdata, @@ -605,6 +606,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .wm831x_num = 2, .irq_base = GLENFARCLAS_PMIC_IRQ_BASE, .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE, + .soft_shutdown = true, .gpio_defaults = { /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */ -- cgit v1.2.1 From 8504a3cb5cbc43dbbec457105d9cead3fc20cd85 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:29:07 +0900 Subject: ARM: S3C64XX: Configure WM1250 EV1 GPIOs on Cragganmore Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index bb81a9fc8221..2b91c877de69 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -37,6 +37,8 @@ #include #include +#include + #include #include @@ -624,6 +626,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; +static struct wm1250_ev1_pdata wm1250_ev1_pdata = { + .gpios = { + [WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12), + [WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12), + [WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13), + [WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14), + [WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8), + }, +}; + static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), @@ -633,7 +645,8 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, - { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27), + .platform_data = &wm1250_ev1_pdata }, }; static struct s3c2410_platform_i2c i2c1_pdata = { -- cgit v1.2.1 From fc716894ac25e81a094adb964b78fde2387411a9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:29:08 +0900 Subject: ARM: S3C64XX: Improve logging of unknown Cragganmore module types As our ID table is populated with hexidecimal values it makes sense to log unknown module IDs in hexidecimal. It's also helpful to display board revisions as 1 based rather than 0 based as that's the numbering system used for the hardware (and what we do when announcing known modules). Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 66668565ee75..003c171ea275 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -154,8 +154,8 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, "Failed to register dev: %d\n", ret); } } else { - dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n", - id, rev); + dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", + id, rev + 1); } return 0; -- cgit v1.2.1 From 3153389b3b923f0e54f01e61d782da022b5e6206 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:29:08 +0900 Subject: ARM: S3C64XX: Run Tobermory interrupts in the default mode No need not to now that generic emulation is provided for the PMIC IRQ controller. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 003c171ea275..6387ced230c9 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -72,7 +72,6 @@ static struct wm8962_pdata wm8962_pdata __initdata = { 0x8000 | WM8962_GPIO_FN_DMICDAT, WM8962_GPIO_FN_IRQ, /* Open drain mode */ }, - .irq_active_low = true, }; static struct wm9081_pdata wm9081_pdata __initdata = { -- cgit v1.2.1 From 3d19f1cd25cfcfba685ef9df7d926c7264b0f8c9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:29:08 +0900 Subject: ARM: S3C64XX: Hook up platform data for Kilchomin module on Cragganmore Now that the WM5100 driver is merged add some initial platform data for the WM5100 on Kilchomin. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 30 ++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 6387ced230c9..c492f75a6b32 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -15,12 +15,41 @@ #include #include +#include #include #include #include #include +static struct wm5100_pdata wm5100_pdata = { + .ldo_ena = S3C64XX_GPN(7), + .irq_flags = IRQF_TRIGGER_HIGH, + .gpio_base = CODEC_GPIO_BASE, + + .in_mode = { + WM5100_IN_DIFF, + WM5100_IN_DIFF, + WM5100_IN_DIFF, + WM5100_IN_SE, + }, + + .hp_pol = CODEC_GPIO_BASE + 3, + .jack_modes = { + { WM5100_MICDET_MICBIAS3, 0, 0 }, + { WM5100_MICDET_MICBIAS2, 1, 1 }, + }, + + .gpio_defaults = { + 0, + 0, + 0, + 0, + 0x2, /* IRQ: CMOS output */ + 0x3, /* CLKOUT: CMOS output */ + }, +}; + static struct wm8996_retune_mobile_config wm8996_retune[] = { { .name = "Sub LPF", @@ -90,6 +119,7 @@ static const struct i2c_board_info wm1254_devs[] = { static const struct i2c_board_info wm1255_devs[] = { { I2C_BOARD_INFO("wm5100", 0x1a), + .platform_data = &wm5100_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, { I2C_BOARD_INFO("wm9081", 0x6c), -- cgit v1.2.1 From c5c32c965dad8456dd2f6e7c1b05183258593e75 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:32:32 +0900 Subject: ARM: S3C64XX: Hook up Littlemill audio card on Cragganmore The Littlemill audio card is an adaptor card which can take any 6220-EV1 CODEC daughtercard. Provide standard support for the use of WM8994 class devices on the Littlemill card, configuring the MFD for WM8958 usage as this part is a superset of all others and the driver will use runtime detection to identify the actually fitted part given the configuration for the superset. Signed-off-by: Mark Brown [kgene.kim@samsung.com: fix up conflict] Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/include/mach/crag6410.h | 5 +++-- arch/arm/mach-s3c64xx/include/mach/irqs.h | 2 +- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 21 +++++++++++++++++++++ arch/arm/mach-s3c64xx/mach-crag6410.c | 6 ++++++ 4 files changed, 31 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index 1cc1cc82e754..5d55ab018b6b 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -15,10 +15,11 @@ #define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START #define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) +#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128) #define PCA935X_GPIO_BASE GPIO_BOARD_START #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) -#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) +#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64) #endif diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 443f85b3c203..96d60e0d9372 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -169,7 +169,7 @@ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) #ifdef CONFIG_MACH_WLF_CRAGG_6410 -#define IRQ_BOARD_NR 128 +#define IRQ_BOARD_NR 160 #elif defined(CONFIG_SMDK6410_WM1190_EV1) #define IRQ_BOARD_NR 64 #elif defined(CONFIG_SMDK6410_WM1192_EV1) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index c492f75a6b32..3fa7ebc83a31 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -14,6 +14,7 @@ #include #include +#include #include #include @@ -133,6 +134,24 @@ static const struct i2c_board_info wm1259_devs[] = { }, }; +static struct wm8994_pdata wm8994_pdata = { + .gpio_base = CODEC_GPIO_BASE, + .gpio_defaults = { + 0x3, /* IRQ out, active high, CMOS */ + }, + .irq_base = CODEC_IRQ_BASE, + .ldo = { + { .supply = "WALLVDD" }, + { .supply = "WALLVDD" }, + }, +}; + +static const struct i2c_board_info wm1277_devs[] = { + { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */ + .platform_data = &wm8994_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; static __devinitdata const struct { u8 id; @@ -154,6 +173,8 @@ static __devinitdata const struct { { .id = 0x3b, .name = "1255-EV1 Kilchoman", .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, { .id = 0x3c, .name = "1273-EV1 Longmorn" }, + { .id = 0x3d, .name = "1277-EV1 Littlemill", + .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 2b91c877de69..b2381c1bb3ba 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -289,6 +289,11 @@ static struct platform_device speyside_wm8962_device = { .id = -1, }; +static struct platform_device littlemill_device = { + .name = "littlemill", + .id = -1, +}; + static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), @@ -341,6 +346,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_backlight_device, &speyside_device, &speyside_wm8962_device, + &littlemill_device, &lowland_device, &wallvdd_device, }; -- cgit v1.2.1 From 51ccd81d9b1220ac1729434ac1ed5b0142001097 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 3 Dec 2011 19:49:26 +0900 Subject: ARM: S3C64XX: Power gate unused domains The S3C64xx CPUs have power gating support with a series of software controllable power domains in the SoC. To take full advantage of these we should implement runtime PM support but since several of the IP blocks have no in tree drivers (and at this point aren't likely to acquire such drivers) we can get some benefit from the hardware much more easily if we just turn those blocks off unconditionally. This will cut down on the leakage these domains generate without interfering with active usage. Do this for: - Domain G: 3D acceleration - Domain V: MFC - Domain I: JPEG and camera interface - Domain P: 2D acceleration, TV encoder and scaler This is easy to reverse if any of these devices do acquire drivers in the future or as part of out of tree patches for them. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/pm.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index b375cd5c47cb..0868d1331912 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -89,6 +89,8 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C64XX_SDMA_SEL), SAVE_ITEM(S3C64XX_MODEM_MIFPCON), + + SAVE_ITEM(S3C64XX_NORMAL_CFG), }; void s3c_pm_configure_extint(void) @@ -181,10 +183,23 @@ static void s3c64xx_pm_prepare(void) static int s3c64xx_pm_init(void) { + u32 val; + pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + /* + * Unconditionally disable power domains that contain only + * blocks which have no mainline driver support. + */ + val = __raw_readl(S3C64XX_NORMAL_CFG); + val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON | + S3C64XX_NORMALCFG_DOMAIN_V_ON | + S3C64XX_NORMALCFG_DOMAIN_I_ON | + S3C64XX_NORMALCFG_DOMAIN_P_ON); + __raw_writel(val, S3C64XX_NORMAL_CFG); + #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); -- cgit v1.2.1 From 8e146f547a5d12498cbbb0190e1b70cca63c1b87 Mon Sep 17 00:00:00 2001 From: Denis Kuzmenko Date: Tue, 6 Dec 2011 20:21:54 +0900 Subject: ARM: S3C2440: Add new LCD (W35i) support for Mini2440 board Signed-off-by: Denis Kuzmenko Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/mach-mini2440.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 91fe0b4c95f1..937eb7818c1a 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -167,6 +167,24 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { .lcdcon5 = (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_HWSWP), }, + /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/ + [3] = { + _LCD_DECLARE( + /* clock */ + 7, + /* xres, margin_right, margin_left, hsync */ + 320, 68, 66, 4, + /* yres, margin_top, margin_bottom, vsync */ + 240, 4, 4, 9, + /* refresh rate */ + 60), + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_HWSWP), + }, }; /* todo - put into gpio header */ -- cgit v1.2.1 From 39cb263eccc974765eed1100d48ac6f0986ef257 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 8 Dec 2011 10:52:19 +0900 Subject: ARM: S3C64XX: Hook up VDDINT on Cragganmore Basic hookup, we do have a GPIO to use to control the voltage but we don't currently use it. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index b2381c1bb3ba..42d3d64947b0 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -380,6 +380,10 @@ static struct regulator_init_data vddarm __initdata = { .driver_data = &vddarm_pdata, }; +static struct regulator_consumer_supply vddint_consumers[] __initdata = { + REGULATOR_SUPPLY("vddint", NULL), +}; + static struct regulator_init_data vddint __initdata = { .constraints = { .name = "VDDINT", @@ -388,6 +392,9 @@ static struct regulator_init_data vddint __initdata = { .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, + .num_consumer_supplies = ARRAY_SIZE(vddint_consumers), + .consumer_supplies = vddint_consumers, + .supply_regulator = "WALLVDD", }; static struct regulator_init_data vddmem __initdata = { -- cgit v1.2.1