From 4a9f4c7f632e248f2ca34497b80f7abc0322d482 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Mon, 1 Jul 2013 22:45:02 +0200 Subject: arm: kirkwood: readynas duo v2: Add GMT G762 Fan Controller Now that GMT G762 PWM Fan Controller is available upstream, let's add missing bindings in Netgear ReadyNAS Duo v2 .dts file. Signed-off-by: Arnaud Ebalard Signed-off-by: Jason Cooper --- .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index ad6ade7d9191..cc43d247b1b5 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -52,6 +52,17 @@ }; }; + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + i2c@11000 { status = "okay"; @@ -59,6 +70,15 @@ compatible = "ricoh,rs5c372a"; reg = <0x32>; }; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; }; serial@12000 { -- cgit v1.2.1 From 2344a29a923b95bb28609da4038590c4131160cc Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Thu, 4 Jul 2013 23:16:46 +0200 Subject: ARM: mvebu: Add Netgear ReadyNAS 102 board All hardware parts of the (Armada 370 based) NETGEAR ReadyNAS 102 are supported by mainline kernel (USB 3.0 rear ports, USB 2.0 front port, Gigabit controller and PHY, serial port, leds, buttons, SATA ports, G762 fan controller) except for: - the Intersil ISL12057 I2C RTC Chip, - the Armada NAND controller. Support for both of those is currently work in progress and does not prevent boot. Signed-off-by: Arnaud Ebalard Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-370-netgear-rn102.dts | 179 +++++++++++++++++++++++++ 2 files changed, 180 insertions(+) create mode 100644 arch/arm/boot/dts/armada-370-netgear-rn102.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9a7028..d869d8385540 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ + armada-370-netgear-rn102.dtb \ armada-370-rd.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts new file mode 100644 index 000000000000..d546edc73456 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -0,0 +1,179 @@ +/* + * Device Tree file for NETGEAR ReadyNAS 102 + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "armada-370.dtsi" + +/ { + model = "NETGEAR ReadyNAS 102"; + compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + pinctrl { + power_led_pin: power-led-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <100000>; + status = "okay"; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; + + pcie-controller { + status = "okay"; + + /* Connected to Marvell SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = < &power_led_pin + &sata1_led_pin + &sata2_led_pin + &backup_led_pin >; + pinctrl-names = "default"; + + blue_power_led { + label = "rn102:blue:pwr"; + gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */ + linux,default-trigger = "heartbeat"; + }; + + green_sata1_led { + label = "rn102:green:sata1"; + gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */ + default-state = "on"; + }; + + green_sata2_led { + label = "rn102:green:sata2"; + gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */ + default-state = "on"; + }; + + green_backup_led { + label = "rn102:green:backup"; + gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 30 1>; + }; + + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 6 1>; + }; + + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 26 1>; + }; + }; + +}; -- cgit v1.2.1 From eee47b7c6eb44861fe9a6c7052fd8243a4beaea6 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 17 Jul 2013 18:51:49 +0200 Subject: ARM: Kirkwood: Add support for another ZyXEL NSA310 variant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are a number of variants of the ZyXEL NSA310, with slightly different LEDs, buttons and i2c devices. Add a DTS file to support one more of these variants. Signed-off-by: Andrew Lunn Tested-by: Tibor Hársszegi Signed-off-by: Jason Cooper --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-nsa310-common.dtsi | 107 +++++++++++++++++ arch/arm/boot/dts/kirkwood-nsa310.dts | 100 +--------------- arch/arm/boot/dts/kirkwood-nsa310a.dts | 165 ++++++++++++++++++++++++++ 4 files changed, 274 insertions(+), 99 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-nsa310-common.dtsi create mode 100644 arch/arm/boot/dts/kirkwood-nsa310a.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d869d8385540..3d4b882a0e29 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ + kirkwood-nsa310a.dtb \ kirkwood-sheevaplug.dtb \ kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi new file mode 100644 index 000000000000..8f739c8eb83a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -0,0 +1,107 @@ +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "ZyXEL NSA310"; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; + + serial@12000 { + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; + gpios = <&gpio1 16 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-names = "default"; + + usb0_power_off: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power Off"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 69003598f5fa..62fb0a9acf34 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,10 +1,8 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +/include/ "kirkwood-nsa310-common.dtsi" / { - model = "ZyXEL NSA310"; compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { @@ -41,11 +39,6 @@ marvell,function = "gpio"; }; - pmx_usb_power_off: pmx-usb-power-off { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; @@ -95,20 +88,6 @@ marvell,pins = "mpp46"; marvell,function = "gpio"; }; - - pmx_pwr_off: pmx-pwr-off { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; }; i2c@11000 { @@ -119,57 +98,6 @@ reg = <0x2e>; }; }; - - nand@3000000 { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; - }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_keys { @@ -246,30 +174,4 @@ gpios = <&gpio1 8 0>; }; }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_pwr_off>; - pinctrl-names = "default"; - gpios = <&gpio1 16 0>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_off>; - pinctrl-names = "default"; - - usb0_power_off: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power Off"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 0>; - }; - }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts new file mode 100644 index 000000000000..1070e9d81c5f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -0,0 +1,165 @@ +/dts-v1/; + +/include/ "kirkwood-nsa310-common.dtsi" + +/* + * There are at least two different NSA310 designs. This variant does + * not have the red USB Led. + */ + +/ { + compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-names = "default"; + + pmx_led_esata_green: pmx-led-esata-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_esata_red: pmx-led-esata-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_green: pmx-led-hdd-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_red: pmx-led-hdd-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + }; + + i2c@11000 { + status = "okay"; + + lm85: lm85@2e { + compatible = "lm85"; + reg = <0x2e>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +}; -- cgit v1.2.1 From ca60985c0042ec391fa7e6131b2894ed5638feab Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 30 Jul 2013 16:59:02 +0200 Subject: ARM: mvebu: use correct #interrupt-cells instead of #interrupts-cells The Device Tree information for the GPIO banks of the Armada 370 and Armada XP SOCs was incorrectly using #interrupts-cells instead of controller when using GPIO interrupts, since the GPIO bank DT node wasn't recognized as a valid interrupt controller by the OF code. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 6 +++--- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 4 ++-- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 6 +++--- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 6 +++--- 4 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index fa3dfc6b4c6a..e8deeab34b33 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -78,7 +78,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -89,7 +89,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; }; @@ -100,7 +100,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <91>; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f8eaa383e07f..ab40f961384f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -63,7 +63,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -74,7 +74,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d9335da210c..254bd24191b6 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -64,7 +64,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -75,7 +75,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; }; @@ -86,7 +86,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <91>; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index c7b1f4d5c1c7..9bb9620e425e 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -80,7 +80,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -91,7 +91,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; }; @@ -102,7 +102,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <91>; }; -- cgit v1.2.1 From 97fdd4e18c8eaaa330b3b5399b1ad6795b467df5 Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 6 Aug 2013 15:01:19 +0000 Subject: ARM: kirkwood: use dts pre-processor for nsa310 boards Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-nsa310-common.dtsi | 4 ++-- arch/arm/boot/dts/kirkwood-nsa310.dts | 2 +- arch/arm/boot/dts/kirkwood-nsa310a.dts | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi index 8f739c8eb83a..06267a91de38 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "ZyXEL NSA310"; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 62fb0a9acf34..ebc3ed9f6c8b 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa310-common.dtsi" / { compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index 1070e9d81c5f..ab0212b0e6f5 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa310-common.dtsi" /* * There are at least two different NSA310 designs. This variant does -- cgit v1.2.1 From 3d0ed759ea91a63854a17c61512237bdc491cf5e Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 6 Aug 2013 15:28:38 +0000 Subject: ARM: mvebu: use dts pre-processor for readynas 102 Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index d546edc73456..05e4485a8225 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -11,7 +11,7 @@ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "NETGEAR ReadyNAS 102"; -- cgit v1.2.1 From 5d3b883071763e6448386b875f04fcb201b6e12d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 13 Aug 2013 11:43:15 -0300 Subject: ARM: mvebu: Fix the Armada 370/XP timer compatible strings The "marvell,armada-370-xp-timer" compatible string, together with the "marvell,timer-25Mhz" property are deprecated and should be removed from current DT. Instead, the timer DT nodes are now required to have an appropriate compatible string, which should be either "marvell,armada-370-timer" or "marvell,armada-xp-timer", depending on SoC. The clock property is now required only for Armada 370 so move it accordingly. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 2 -- arch/arm/boot/dts/armada-370.dtsi | 5 +++++ arch/arm/boot/dts/armada-xp.dtsi | 2 +- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 90b117624abb..442c84e3c8da 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -81,10 +81,8 @@ }; timer@20300 { - compatible = "marvell,armada-370-xp-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; - clocks = <&coreclk 2>; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index e8deeab34b33..472433cb4c15 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -104,6 +104,11 @@ interrupts = <91>; }; + timer@20300 { + compatible = "marvell,armada-370-timer"; + clocks = <&coreclk 2>; + }; + coreclk: mvebu-sar@18230 { compatible = "marvell,armada-370-core-clock"; reg = <0x18230 0x08>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 416eb9481844..549151ed6632 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -62,7 +62,7 @@ }; timer@20300 { - marvell,timer-25Mhz; + compatible = "marvell,armada-xp-timer"; }; coreclk: mvebu-sar@18230 { -- cgit v1.2.1