From 6ad819b06ddf13a5a1d995eb26555903f6c3b71a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 9 Jun 2012 12:10:19 +0300 Subject: [SCSI] arcmsr: fix misuse of | instead of & ARCMSR_ARC1880_DiagWrite_ENABLE is 0x00000080 so (x | 0x00000080) is never zero. The intent here was to test that loop until ARCMSR_ARC1880_DiagWrite_ENABLE was turned on, but because the test was wrong, we would do five loops regardless of whether it succeed or not. Also I simplified the condition a little by removing the unused assignement. Signed-off-by: Dan Carpenter Acked-by: Nick Cheng Signed-off-by: James Bottomley --- drivers/scsi/arcmsr/arcmsr_hba.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index cbde1dca45ad..def24a1079ad 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -2821,7 +2821,7 @@ static void arcmsr_hardware_reset(struct AdapterControlBlock *acb) int i, count = 0; struct MessageUnit_A __iomem *pmuA = acb->pmuA; struct MessageUnit_C __iomem *pmuC = acb->pmuC; - u32 temp = 0; + /* backup pci config data */ printk(KERN_NOTICE "arcmsr%d: executing hw bus reset .....\n", acb->host->host_no); for (i = 0; i < 64; i++) { @@ -2839,7 +2839,7 @@ static void arcmsr_hardware_reset(struct AdapterControlBlock *acb) writel(0x2, &pmuC->write_sequence); writel(0x7, &pmuC->write_sequence); writel(0xD, &pmuC->write_sequence); - } while ((((temp = readl(&pmuC->host_diagnostic)) | ARCMSR_ARC1880_DiagWrite_ENABLE) == 0) && (count < 5)); + } while (((readl(&pmuC->host_diagnostic) & ARCMSR_ARC1880_DiagWrite_ENABLE) == 0) && (count < 5)); writel(ARCMSR_ARC1880_RESET_ADAPTER, &pmuC->host_diagnostic); } else { pci_write_config_byte(acb->pdev, 0x84, 0x20); -- cgit v1.2.1