From 907f4678c114a125fe4584758681c31bf3d627da Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 12 May 2005 15:03:42 -0400 Subject: [libata ahci] support PCI MSI interrupt vector --- drivers/scsi/ahci.c | 73 +++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 63 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index da5bd33d982d..5e2a1e8b9039 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -152,6 +152,7 @@ struct ahci_sg { struct ahci_host_priv { unsigned long flags; + unsigned int have_msi; /* is PCI MSI enabled? */ u32 cap; /* cache of HOST_CAP register */ u32 port_map; /* cache of HOST_PORTS_IMPL reg */ }; @@ -182,6 +183,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); static u8 ahci_check_err(struct ata_port *ap); static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +static void ahci_remove_one (struct pci_dev *pdev); static Scsi_Host_Template ahci_sht = { .module = THIS_MODULE, @@ -271,7 +273,7 @@ static struct pci_driver ahci_pci_driver = { .name = DRV_NAME, .id_table = ahci_pci_tbl, .probe = ahci_init_one, - .remove = ata_pci_remove_one, + .remove = ahci_remove_one, }; @@ -876,15 +878,19 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) } /* move to PCI layer, integrate w/ MSI stuff */ -static void pci_enable_intx(struct pci_dev *pdev) +static void pci_intx(struct pci_dev *pdev, int enable) { - u16 pci_command; + u16 pci_command, new; pci_read_config_word(pdev, PCI_COMMAND, &pci_command); - if (pci_command & PCI_COMMAND_INTX_DISABLE) { - pci_command &= ~PCI_COMMAND_INTX_DISABLE; + + if (enable) + new = pci_command & ~PCI_COMMAND_INTX_DISABLE; + else + new = pci_command | PCI_COMMAND_INTX_DISABLE; + + if (new != pci_command) pci_write_config_word(pdev, PCI_COMMAND, pci_command); - } } static void ahci_print_info(struct ata_probe_ent *probe_ent) @@ -966,7 +972,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) unsigned long base; void *mmio_base; unsigned int board_idx = (unsigned int) ent->driver_data; - int pci_dev_busy = 0; + int have_msi, pci_dev_busy = 0; int rc; VPRINTK("ENTER\n"); @@ -984,12 +990,17 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out; } - pci_enable_intx(pdev); + if (pci_enable_msi(pdev) == 0) + have_msi = 1; + else { + pci_intx(pdev, 1); + have_msi = 0; + } probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; - goto err_out_regions; + goto err_out_msi; } memset(probe_ent, 0, sizeof(*probe_ent)); @@ -1022,6 +1033,8 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->mmio_base = mmio_base; probe_ent->private_data = hpriv; + hpriv->have_msi = have_msi; + /* initialize adapter */ rc = ahci_host_init(probe_ent); if (rc) @@ -1041,7 +1054,11 @@ err_out_iounmap: iounmap(mmio_base); err_out_free_ent: kfree(probe_ent); -err_out_regions: +err_out_msi: + if (have_msi) + pci_disable_msi(pdev); + else + pci_intx(pdev, 0); pci_release_regions(pdev); err_out: if (!pci_dev_busy) @@ -1049,6 +1066,42 @@ err_out: return rc; } +static void ahci_remove_one (struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host_set *host_set = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host_set->private_data; + struct ata_port *ap; + unsigned int i; + int have_msi; + + for (i = 0; i < host_set->n_ports; i++) { + ap = host_set->ports[i]; + + scsi_remove_host(ap->host); + } + + have_msi = hpriv->have_msi; + free_irq(host_set->irq, host_set); + host_set->ops->host_stop(host_set); + iounmap(host_set->mmio_base); + + for (i = 0; i < host_set->n_ports; i++) { + ap = host_set->ports[i]; + + ata_scsi_release(ap->host); + scsi_host_put(ap->host); + } + + if (have_msi) + pci_disable_msi(pdev); + else + pci_intx(pdev, 0); + pci_release_regions(pdev); + kfree(host_set); + pci_disable_device(pdev); + dev_set_drvdata(dev, NULL); +} static int __init ahci_init(void) { -- cgit v1.2.1 From 6f2f38128170814e151cfedf79532e19cd179567 Mon Sep 17 00:00:00 2001 From: Brad Campbell Date: Thu, 12 May 2005 15:07:47 -0400 Subject: [PATCH] libata basic detection and errata for PATA->SATA bridges This patch works around an issue with WD drives (and possibly others) over SiL PATA->SATA Bridges on SATA controllers locking up with transfers > 200 sectors. Signed-off-by: Brad Campbell --- drivers/scsi/libata-core.c | 35 +++++++++++++++++++++++++++++++++-- include/linux/ata.h | 1 + include/linux/libata.h | 1 + 3 files changed, 35 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0b5d3a5b7eda..8b5a3f00083d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1186,6 +1186,37 @@ err_out: DPRINTK("EXIT, err\n"); } + +static inline u8 ata_dev_knobble(struct ata_port *ap) +{ + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); +} + +/** + * ata_dev_config - Run device specific handlers and check for + * SATA->PATA bridges + * @ap: Bus + * @i: Device + * + * LOCKING: + */ + +void ata_dev_config(struct ata_port *ap, unsigned int i) +{ + /* limit bridge transfers to udma5, 200 sectors */ + if (ata_dev_knobble(ap)) { + printk(KERN_INFO "ata%u(%u): applying bridge limits\n", + ap->id, ap->device->devno); + ap->udma_mask &= ATA_UDMA5; + ap->host->max_sectors = ATA_MAX_SECTORS; + ap->host->hostt->max_sectors = ATA_MAX_SECTORS; + ap->device->flags |= ATA_DFLAG_LOCK_SECTORS; + } + + if (ap->ops->dev_config) + ap->ops->dev_config(ap, &ap->device[i]); +} + /** * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe @@ -1208,8 +1239,7 @@ static int ata_bus_probe(struct ata_port *ap) ata_dev_identify(ap, i); if (ata_dev_present(&ap->device[i])) { found = 1; - if (ap->ops->dev_config) - ap->ops->dev_config(ap, &ap->device[i]); + ata_dev_config(ap,i); } } @@ -4014,6 +4044,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_id_string); +EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); #ifdef CONFIG_PCI diff --git a/include/linux/ata.h b/include/linux/ata.h index f178894edd04..ca5fcadf9981 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -224,6 +224,7 @@ struct ata_taskfile { }; #define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) +#define ata_id_is_sata(id) ((id)[93] == 0) #define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6)) #define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5)) #define ata_id_has_flush(id) ((id)[83] & (1 << 12)) diff --git a/include/linux/libata.h b/include/linux/libata.h index 505160ab472b..d33e70361a7d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -420,6 +420,7 @@ extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, extern unsigned int ata_dev_classify(struct ata_taskfile *tf); extern void ata_dev_id_string(u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); +extern void ata_dev_config(struct ata_port *ap, unsigned int i); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_port *ap); -- cgit v1.2.1 From f497ba735fc9ff4e35a19641143708b3be1c7061 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Thu, 12 May 2005 15:51:01 -0400 Subject: [libata sata_promise] pdc20619 (PATA) support --- drivers/scsi/sata_promise.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 19a13e3590f4..2b5e41f02b8a 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -59,6 +59,7 @@ enum { board_2037x = 0, /* FastTrak S150 TX2plus */ board_20319 = 1, /* FastTrak S150 TX4 */ + board_20619 = 2, /* FastTrak TX4000 */ PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */ @@ -146,6 +147,17 @@ static struct ata_port_info pdc_port_info[] = { .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &pdc_ata_ops, }, + + /* board_20619 */ + { + .sht = &pdc_ata_sht, + .host_flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | + ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_ata_ops, + }, }; static struct pci_device_id pdc_ata_pci_tbl[] = { @@ -169,6 +181,9 @@ static struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20619 }, + { } /* terminate list */ }; @@ -633,6 +648,15 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e case board_2037x: probe_ent->n_ports = 2; break; + case board_20619: + probe_ent->n_ports = 4; + + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); + pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); + + probe_ent->port[2].scr_addr = base + 0x600; + probe_ent->port[3].scr_addr = base + 0x700; + break; default: BUG(); break; @@ -673,7 +697,7 @@ static void __exit pdc_ata_exit(void) MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Promise SATA TX2/TX4 low-level driver"); +MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl); MODULE_VERSION(DRV_VERSION); -- cgit v1.2.1 From 60bf09a366c873aab36e3b3110ee9f5bd89a1a6d Mon Sep 17 00:00:00 2001 From: Narendra Sankar Date: Wed, 25 May 2005 16:51:00 -0700 Subject: [PATCH] sata_svw: Add support for new device IDs BCM5785 (HT1000) is a new southbridge from Serverworks/Broadcom that incorporates 4 SATA ports in a single PCIX function. Functionally these ports are similar to that in older devices like the Apple K2 and the Frodo4/8. This patch adds support for the new PCI device ID along with a blurb on what the various device IDs mean. Additionally in all devices based on this SATA controller, the SATA ports appear as a single PCI function. This is true for older Frodo8 devices as well. Hence the init function should init all the ports present in the detected controller (which could be 4 or 8). Signed-off-by: Narendra Sankar --- drivers/scsi/sata_svw.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 05075bd3a893..116cb3f44cdb 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -343,6 +343,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e void *mmio_base; int pci_dev_busy = 0; int rc; + int i; if (!printed_version++) printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); @@ -420,11 +421,11 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->mwdma_mask = 0x7; probe_ent->udma_mask = 0x7f; - /* We have 4 ports per PCI function */ - k2_sata_setup_port(&probe_ent->port[0], base + 0 * K2_SATA_PORT_OFFSET); - k2_sata_setup_port(&probe_ent->port[1], base + 1 * K2_SATA_PORT_OFFSET); - k2_sata_setup_port(&probe_ent->port[2], base + 2 * K2_SATA_PORT_OFFSET); - k2_sata_setup_port(&probe_ent->port[3], base + 3 * K2_SATA_PORT_OFFSET); + /* different controllers have different number of ports - currently 4 or 8 */ + /* All ports are on the same function. Multi-function device is no + * longer available. This should not be seen in any system. */ + for (i = 0; i < ent->driver_data; i++) + k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET); pci_set_master(pdev); @@ -444,11 +445,17 @@ err_out: return rc; } - +/* 0x240 is device ID for Apple K2 device + * 0x241 is device ID for Serverworks Frodo4 + * 0x242 is device ID for Serverworks Frodo8 + * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA + * controller + * */ static struct pci_device_id k2_sata_pci_tbl[] = { - { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, { } }; -- cgit v1.2.1 From ead5de996fc35f97fa120b414bfc098f1bca29d2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 31 May 2005 11:53:57 -0400 Subject: [libata] ahci: Update for recent ->host_stop() API change --- drivers/scsi/ahci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index ee53b227c01e..eb7940aba400 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -39,7 +39,7 @@ #include #define DRV_NAME "ahci" -#define DRV_VERSION "1.00" +#define DRV_VERSION "1.01" enum { @@ -1086,8 +1086,6 @@ static void ahci_remove_one (struct pci_dev *pdev) have_msi = hpriv->have_msi; free_irq(host_set->irq, host_set); - host_set->ops->host_stop(host_set); - iounmap(host_set->mmio_base); for (i = 0; i < host_set->n_ports; i++) { ap = host_set->ports[i]; @@ -1096,12 +1094,14 @@ static void ahci_remove_one (struct pci_dev *pdev) scsi_host_put(ap->host); } + host_set->ops->host_stop(host_set); + kfree(host_set); + if (have_msi) pci_disable_msi(pdev); else pci_intx(pdev, 0); pci_release_regions(pdev); - kfree(host_set); pci_disable_device(pdev); dev_set_drvdata(dev, NULL); } -- cgit v1.2.1 From 4b0060f4bdec7484e8d1ad68f7b28b3f1c2e6bf8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 4 Jun 2005 00:50:22 -0400 Subject: [libata] ahci: minor PCI MSI cleanup Replace 'have_msi' variable with a bit in the existing 'flags' variable,. AHCI_FLAG_MSI. --- drivers/scsi/ahci.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index eb7940aba400..1799233dcf9f 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -134,6 +134,9 @@ enum { PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + + /* hpriv->flags bits */ + AHCI_FLAG_MSI = (1 << 0), }; struct ahci_cmd_hdr { @@ -153,7 +156,6 @@ struct ahci_sg { struct ahci_host_priv { unsigned long flags; - unsigned int have_msi; /* is PCI MSI enabled? */ u32 cap; /* cache of HOST_CAP register */ u32 port_map; /* cache of HOST_PORTS_IMPL reg */ }; @@ -797,8 +799,6 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) return rc; } } - - hpriv->flags |= HOST_CAP_64; } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { @@ -1036,7 +1036,8 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->mmio_base = mmio_base; probe_ent->private_data = hpriv; - hpriv->have_msi = have_msi; + if (have_msi) + hpriv->flags |= AHCI_FLAG_MSI; /* initialize adapter */ rc = ahci_host_init(probe_ent); @@ -1084,7 +1085,7 @@ static void ahci_remove_one (struct pci_dev *pdev) scsi_remove_host(ap->host); } - have_msi = hpriv->have_msi; + have_msi = hpriv->flags & AHCI_FLAG_MSI; free_irq(host_set->irq, host_set); for (i = 0; i < host_set->n_ports; i++) { -- cgit v1.2.1 From a0ea7328e3f4971bbc2287c344650b08c2cec375 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 4 Jun 2005 01:13:15 -0400 Subject: [libata] ahci: finish ATAPI support (hopefully) --- drivers/scsi/ahci.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 1799233dcf9f..9a547ca9c864 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -50,6 +50,7 @@ enum { AHCI_CMD_SLOT_SZ = 32 * 32, AHCI_RX_FIS_SZ = 256, AHCI_CMD_TBL_HDR = 0x80, + AHCI_CMD_TBL_CDB = 0x40, AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16), AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ + AHCI_RX_FIS_SZ, @@ -510,7 +511,8 @@ static void ahci_fill_sg(struct ata_queued_cmd *qc) static void ahci_qc_prep(struct ata_queued_cmd *qc) { - struct ahci_port_priv *pp = qc->ap->private_data; + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ @@ -522,18 +524,8 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) opts = (qc->n_elem << 16) | cmd_fis_len; if (qc->tf.flags & ATA_TFLAG_WRITE) opts |= AHCI_CMD_WRITE; - - switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: - case ATA_PROT_ATAPI_DMA: + if (is_atapi_taskfile(&qc->tf)) opts |= AHCI_CMD_ATAPI; - break; - - default: - /* do nothing */ - break; - } pp->cmd_slot[0].opts = cpu_to_le32(opts); pp->cmd_slot[0].status = 0; @@ -545,6 +537,10 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) * a SATA Register - Host to Device command FIS. */ ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); + if (opts & AHCI_CMD_ATAPI) { + memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len); + } if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; -- cgit v1.2.1 From 54258a8a2e81b11e486068f1cfab9fe4746b8420 Mon Sep 17 00:00:00 2001 From: Narendra Sankar Date: Tue, 7 Jun 2005 11:55:14 -0700 Subject: [PATCH] sata_svw: bump version number Bump sata_svw.c version number to indicate support for BCM5785(HT1000) Southbridge SATA controller. Signed-off-by: Narendra Sankar diff -uNr linux-2.6.12-rc5/drivers/scsi/sata_svw.c linux-2.6.12-rc5.brcm/drivers/scsi/sata_svw.c --- drivers/scsi/sata_svw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 189744887628..858e07185dbd 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -49,7 +49,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "1.05" +#define DRV_VERSION "1.06" /* Taskfile registers offsets */ #define K2_SATA_TF_CMD_OFFSET 0x00 -- cgit v1.2.1