From 4e38b745af76cdd93bca33258e1e33a23458f92c Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 31 Oct 2012 16:07:43 +0800 Subject: ASoC: si476x: Add missing break for SNDRV_PCM_FORMAT_S8 switch case Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/si476x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/si476x.c b/sound/soc/codecs/si476x.c index f2d61a187830..566ea3256e2d 100644 --- a/sound/soc/codecs/si476x.c +++ b/sound/soc/codecs/si476x.c @@ -159,6 +159,7 @@ static int si476x_codec_hw_params(struct snd_pcm_substream *substream, switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: width = SI476X_PCM_FORMAT_S8; + break; case SNDRV_PCM_FORMAT_S16_LE: width = SI476X_PCM_FORMAT_S16_LE; break; -- cgit v1.2.1 From 85dfb745ee40232876663ae206cba35f24ab2a40 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 18 Feb 2013 16:24:20 +0100 Subject: af_key: initialize satype in key_notify_policy_flush() This field was left uninitialized. Some user daemons perform check against this field. Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- net/key/af_key.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/key/af_key.c b/net/key/af_key.c index 9ef79851f297..d5a4a796f025 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2694,6 +2694,7 @@ static int key_notify_policy_flush(const struct km_event *c) hdr->sadb_msg_pid = c->portid; hdr->sadb_msg_version = PF_KEY_V2; hdr->sadb_msg_errno = (uint8_t) 0; + hdr->sadb_msg_satype = SADB_SATYPE_UNSPEC; hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t)); pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net); return 0; -- cgit v1.2.1 From 75da01e127f7db3b23effa6118336d303e7572a7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Thu, 31 Jan 2013 11:25:52 +0000 Subject: ARM: KVM: vgic: force EOIed LRs to the empty state The VGIC doesn't guarantee that an EOIed LR that has been configured to generate a maintenance interrupt will appear as empty. While the code recovers from this situation, it is better to clean the LR and flag it as empty so it can be quickly recycled. Signed-off-by: Marc Zyngier --- arch/arm/kvm/vgic.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c index c9a17316e9fe..76ea1aa5e7d2 100644 --- a/arch/arm/kvm/vgic.c +++ b/arch/arm/kvm/vgic.c @@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) lr, irq, vgic_cpu->vgic_lr[lr]); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT; - - goto out; + return true; } /* Try to use another LR for this interrupt */ @@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) vgic_cpu->vgic_irq_lr_map[irq] = lr; set_bit(lr, vgic_cpu->lr_used); -out: if (!vgic_irq_is_edge(vcpu, irq)) vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI; @@ -1054,6 +1052,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) } else { vgic_cpu_irq_clear(vcpu, irq); } + + /* + * Despite being EOIed, the LR may not have + * been marked as empty. + */ + set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr); + vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT; } } -- cgit v1.2.1 From 33c83cb3c1d84b76c8270abe5487e77f83a81b22 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 1 Feb 2013 18:28:30 +0000 Subject: ARM: KVM: vgic: take distributor lock on sync_hwstate path Now that the maintenance interrupt handling is actually out of the handler itself, the code becomes quite racy as we can get preempted while we process the state. Wrapping this code around the distributor lock ensures that we're not preempted and relatively race-free. Signed-off-by: Marc Zyngier --- arch/arm/kvm/vgic.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c index 76ea1aa5e7d2..0e4cfe123b38 100644 --- a/arch/arm/kvm/vgic.c +++ b/arch/arm/kvm/vgic.c @@ -1016,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr); - /* - * We do not need to take the distributor lock here, since the only - * action we perform is clearing the irq_active_bit for an EOIed - * level interrupt. There is a potential race with - * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we - * check if the interrupt is already active. Two possibilities: - * - * - The queuing is occurring on the same vcpu: cannot happen, - * as we're already in the context of this vcpu, and - * executing the handler - * - The interrupt has been migrated to another vcpu, and we - * ignore this interrupt for this run. Big deal. It is still - * pending though, and will get considered when this vcpu - * exits. - */ if (vgic_cpu->vgic_misr & GICH_MISR_EOI) { /* * Some level interrupts have been EOIed. Clear their @@ -1069,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) } /* - * Sync back the VGIC state after a guest run. We do not really touch - * the distributor here (the irq_pending_on_cpu bit is safe to set), - * so there is no need for taking its lock. + * Sync back the VGIC state after a guest run. The distributor lock is + * needed so we don't get preempted in the middle of the state processing. */ static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) { @@ -1117,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu) void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) { + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + if (!irqchip_in_kernel(vcpu->kvm)) return; + spin_lock(&dist->lock); __kvm_vgic_sync_hwstate(vcpu); + spin_unlock(&dist->lock); } int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu) -- cgit v1.2.1 From 8af294b472067e9034fe288d912455cc0961d1b9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 22 Feb 2013 17:48:15 +0000 Subject: ASoC: dapm: Fix handling of loops Currently if a path loops back on itself we correctly skip over it to avoid going into an infinite loop but this causes us to ignore the need to power up the path as we don't count the loop for the purposes of counting inputs and outputs. This means that internal loopbacks within a device that have powered devices on them won't be powered up. Fix this by treating any path that is currently in the process of being recursed as having a single input or output so that it is counted for the purposes of power decisions. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- include/sound/soc-dapm.h | 1 + sound/soc/soc-dapm.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index e1ef63d4a5c4..44a30b108683 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -488,6 +488,7 @@ struct snd_soc_dapm_path { /* status */ u32 connect:1; /* source and sink widgets are connected */ u32 walked:1; /* path has been walked */ + u32 walking:1; /* path is in the process of being walked */ u32 weak:1; /* path ignored for power management */ int (*connected)(struct snd_soc_dapm_widget *source, diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 258acadb9e7d..f3255517de79 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -821,6 +821,7 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, (widget->id == snd_soc_dapm_line && !list_empty(&widget->sources))) { widget->outputs = snd_soc_dapm_suspend_check(widget); + path->walking = 0; return widget->outputs; } } @@ -831,6 +832,9 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, if (path->weak) continue; + if (path->walking) + return 1; + if (path->walked) continue; @@ -838,6 +842,7 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, if (path->sink && path->connect) { path->walked = 1; + path->walking = 1; /* do we need to add this widget to the list ? */ if (list) { @@ -847,11 +852,14 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, dev_err(widget->dapm->dev, "ASoC: could not add widget %s\n", widget->name); + path->walking = 0; return con; } } con += is_connected_output_ep(path->sink, list); + + path->walking = 0; } } @@ -931,6 +939,9 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, if (path->weak) continue; + if (path->walking) + return 1; + if (path->walked) continue; @@ -938,6 +949,7 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, if (path->source && path->connect) { path->walked = 1; + path->walking = 1; /* do we need to add this widget to the list ? */ if (list) { @@ -947,11 +959,14 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, dev_err(widget->dapm->dev, "ASoC: could not add widget %s\n", widget->name); + path->walking = 0; return con; } } con += is_connected_input_ep(path->source, list); + + path->walking = 0; } } -- cgit v1.2.1 From 27a737ff7cb062fb9cbceba9b44d60aa74862bfa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Mar 2013 23:17:08 +0100 Subject: mac80211: always synchronize_net() during station removal If there are keys left during station removal, then a synchronize_net() will be done (for each key, I have a patch to address this for 3.10), otherwise it won't be done at all which causes issues because the station could be used for TX while it's being removed from the driver -- that might confuse the driver. Fix this by always doing synchronize_net() if no key was present any more. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index a79ce820cb50..238a0cca320e 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -766,6 +766,7 @@ int __must_check __sta_info_destroy(struct sta_info *sta) struct ieee80211_local *local; struct ieee80211_sub_if_data *sdata; int ret, i; + bool have_key = false; might_sleep(); @@ -793,12 +794,19 @@ int __must_check __sta_info_destroy(struct sta_info *sta) list_del_rcu(&sta->list); mutex_lock(&local->key_mtx); - for (i = 0; i < NUM_DEFAULT_KEYS; i++) + for (i = 0; i < NUM_DEFAULT_KEYS; i++) { __ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i])); - if (sta->ptk) + have_key = true; + } + if (sta->ptk) { __ieee80211_key_free(key_mtx_dereference(local, sta->ptk)); + have_key = true; + } mutex_unlock(&local->key_mtx); + if (!have_key) + synchronize_net(); + sta->dead = true; local->num_sta--; -- cgit v1.2.1 From 021fcdc13acbab78589325ae2db0b384b4ee7222 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Thu, 7 Mar 2013 11:08:29 +0200 Subject: cfg80211: fix inconsistency in trace for rdev_set_mac_acl There is NETDEV_ENTRY that was incorrectly assigned as WIPHY_ASSIGN, fix it. Signed-off-by: Vladimir Kondratiev Signed-off-by: Johannes Berg --- net/wireless/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index b7a531380e19..6847d043edea 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1778,7 +1778,7 @@ TRACE_EVENT(rdev_set_mac_acl, ), TP_fast_assign( WIPHY_ASSIGN; - WIPHY_ASSIGN; + NETDEV_ASSIGN; __entry->acl_policy = params->acl_policy; ), TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d", -- cgit v1.2.1 From 1345ee6a6d90813f972379fad8b75f17026fc8b2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Mar 2013 10:31:05 +0100 Subject: cfg80211: fix potential BSS memory leak and update In the odd case that while updating information from a beacon, a BSS was found that is part of a hidden group, we drop the new information. In this case, however, we leak the IE buffer from the update, and erroneously update the entry's timestamp so it will never time out. Fix both these issues. Cc: Larry Finger Signed-off-by: Johannes Berg --- net/wireless/scan.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 674aadca0079..e93bd31d23bb 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -698,11 +698,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR); if (found) { - found->pub.beacon_interval = tmp->pub.beacon_interval; - found->pub.signal = tmp->pub.signal; - found->pub.capability = tmp->pub.capability; - found->ts = tmp->ts; - /* Update IEs */ if (rcu_access_pointer(tmp->pub.proberesp_ies)) { const struct cfg80211_bss_ies *old; @@ -723,6 +718,8 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, if (found->pub.hidden_beacon_bss && !list_empty(&found->hidden_list)) { + const struct cfg80211_bss_ies *f; + /* * The found BSS struct is one of the probe * response members of a group, but we're @@ -732,6 +729,10 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, * SSID to showing it, which is confusing so * drop this information. */ + + f = rcu_access_pointer(tmp->pub.beacon_ies); + kfree_rcu((struct cfg80211_bss_ies *)f, + rcu_head); goto drop; } @@ -761,6 +762,11 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); } + + found->pub.beacon_interval = tmp->pub.beacon_interval; + found->pub.signal = tmp->pub.signal; + found->pub.capability = tmp->pub.capability; + found->ts = tmp->ts; } else { struct cfg80211_internal_bss *new; struct cfg80211_internal_bss *hidden; -- cgit v1.2.1 From 07e5a5f5ab7474589c15fc5d88e4f7fc43979530 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Mar 2013 13:22:05 +0100 Subject: mac80211: fix crash with P2P Device returning action frames If a P2P Device interface receives an unhandled action frame, we attempt to return it. This crashes because it doesn't have a channel context. Fix the crash by using status->band and properly mark the return frame as an off-channel frame. Reported-by: Ilan Peer Reviewed-by: Ilan Peer Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index bb73ed2d20b9..c6844ad080be 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2675,7 +2675,19 @@ ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx) memset(nskb->cb, 0, sizeof(nskb->cb)); - ieee80211_tx_skb(rx->sdata, nskb); + if (rx->sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(nskb); + + info->flags = IEEE80211_TX_CTL_TX_OFFCHAN | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK | + IEEE80211_TX_CTL_NO_CCK_RATE; + if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) + info->hw_queue = + local->hw.offchannel_tx_hw_queue; + } + + __ieee80211_tx_skb_tid_band(rx->sdata, nskb, 7, + status->band); } dev_kfree_skb(rx->skb); return RX_QUEUED; -- cgit v1.2.1 From 63981a4096081f3a35351f56fa89e91f493c02c7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 22 Jan 2013 10:58:21 +0100 Subject: MIPS: compat: Return same error ENOSYS as native for invalid operation. The pains for multiplexed syscalls. Noticed by Al Viro . Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 8eeee1c860c0..db9655f08892 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -171,7 +171,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, err = compat_sys_shmctl(first, second, compat_ptr(ptr)); break; default: - err = -EINVAL; + err = -ENOSYS; break; } -- cgit v1.2.1 From e744109fce4b9581acdc23287667e240bcd239b7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 3 Mar 2013 11:39:35 +0000 Subject: MIPS: Use CONFIG_CPU_MIPSR2 in csum_partial.S The csum_partial implementation contain optimalizations for the MIPS R2 instruction set. This optimization is never enabled however because the if directive uses the CPU_MIPSR2 constant which is not defined anywhere. Use the CONFIG_CPU_MIPSR2 constant instead. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4971/ Signed-off-by: Ralf Baechle --- arch/mips/lib/csum_partial.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 507147aebd41..a6adffbb4e5f 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -270,7 +270,7 @@ LEAF(csum_partial) #endif /* odd buffer alignment? */ -#ifdef CPU_MIPSR2 +#ifdef CONFIG_CPU_MIPSR2 wsbh v1, sum movn sum, v1, t7 #else @@ -670,7 +670,7 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) addu sum, v1 #endif -#ifdef CPU_MIPSR2 +#ifdef CONFIG_CPU_MIPSR2 wsbh v1, sum movn sum, v1, odd #else -- cgit v1.2.1 From 0c81157b46c533139d6be721d41617020c59a2c3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 26 Feb 2013 14:35:23 -0800 Subject: MIPS: Fix logic errors in bitops.c commit 92d11594f6 (MIPS: Remove irqflags.h dependency from bitops.h) factored some of the bitops code out into a separate file (arch/mips/lib/bitops.c). Unfortunately the logic converting a bit mask into a boolean result was lost in some of the functions. We had: int res; unsigned long shifted_result_bit; . . . res = shifted_result_bit; return res; Which truncates off the high 32 bits (thus yielding an incorrect value) on 64-bit systems. The manifestation of this is that a non-SMP 64-bit kernel will not boot as the bitmap operations in bootmem.c are all screwed up. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: Jim Quinlan Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4965/ Signed-off-by: Ralf Baechle --- arch/mips/lib/bitops.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c index 81f1dcfdcab8..a64daee740ee 100644 --- a/arch/mips/lib/bitops.c +++ b/arch/mips/lib/bitops.c @@ -90,12 +90,12 @@ int __mips_test_and_set_bit(unsigned long nr, unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a |= mask; raw_local_irq_restore(flags); return res; @@ -116,12 +116,12 @@ int __mips_test_and_set_bit_lock(unsigned long nr, unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a |= mask; raw_local_irq_restore(flags); return res; @@ -141,12 +141,12 @@ int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a &= ~mask; raw_local_irq_restore(flags); return res; @@ -166,12 +166,12 @@ int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr) unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a ^= mask; raw_local_irq_restore(flags); return res; -- cgit v1.2.1 From 9f91e5064c6c24d6ccd760a6b6120de4560d9829 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 21 Feb 2013 15:38:19 +0900 Subject: MIPS: VR4133: Fix probe for LL/SC. Signed-off-by: Yoichi Yuasa Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4963/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 6bfccc227a95..d069a19112e8 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -580,6 +580,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) c->tlbsize = 48; break; case PRID_IMP_VR41XX: + set_isa(c, MIPS_CPU_ISA_III); + c->options = R4K_OPTS; + c->tlbsize = 32; switch (c->processor_id & 0xf0) { case PRID_REV_VR4111: c->cputype = CPU_VR4111; @@ -604,6 +607,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "NEC VR4131"; } else { c->cputype = CPU_VR4133; + c->options |= MIPS_CPU_LLSC; __cpu_name[cpu] = "NEC VR4133"; } break; @@ -613,9 +617,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "NEC Vr41xx"; break; } - set_isa(c, MIPS_CPU_ISA_III); - c->options = R4K_OPTS; - c->tlbsize = 32; break; case PRID_IMP_R4300: c->cputype = CPU_R4300; -- cgit v1.2.1 From 383c97b4587665d47d08dff37ec85b44be760505 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 4 Mar 2013 04:17:21 +0000 Subject: MIPS: Add dependencies for HAVE_ARCH_TRANSPARENT_HUGEPAGE The MIPS implementation of transparent huge-pages (THP) is 64-bit only, and of course also requires that the CPU supports huge-pages. Currently it's entirely possible to enable THP in other configurations, which then fail to build due to pfn_pmd() not being defined. Signed-off-by: Ben Hutchings Cc: linux-mips@linux-mips.org Acked-by: David Daney Patchwork: https://patchwork.linux-mips.org/patch/4972/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ae9c716c46bb..e8e10b794b87 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -18,7 +18,7 @@ config MIPS select HAVE_KRETPROBES select HAVE_DEBUG_KMEMLEAK select ARCH_BINFMT_ELF_RANDOMIZE_PIE - select HAVE_ARCH_TRANSPARENT_HUGEPAGE + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT select RTC_LIB if !MACH_LOONGSON select GENERIC_ATOMIC64 if !64BIT select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE -- cgit v1.2.1 From 631b0af98c1efb160f02154743ae9f13fe03e347 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 5 Mar 2013 13:20:20 +0100 Subject: MIPS: Get rid of CONFIG_CPU_HAS_LLSC again Commit f7ade3c168e4f437c11f57be012992bbb0e3075c ("MIPS: Get rid of CONFIG_CPU_HAS_LLSC") did what it promised to do. But since then that macro and its Kconfig symbol popped up again. Get rid of those again. Signed-off-by: Paul Bolle Cc: Jonas Gorski Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4978/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 - arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h | 4 ---- 2 files changed, 5 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e8e10b794b87..1a166d98773e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1493,7 +1493,6 @@ config CPU_XLP select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM - select CPU_HAS_LLSC select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC select CPU_HAS_PREFETCH diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h index d9c828419037..b40f37fb3dee 100644 --- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h @@ -28,11 +28,7 @@ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ -#ifdef CONFIG_CPU_HAS_LLSC -#define cpu_has_llsc 1 -#else #define cpu_has_llsc 0 -#endif /* #define cpu_has_vtag_icache ? */ /* #define cpu_has_dc_aliases ? */ /* #define cpu_has_ic_fills_f_dc ? */ -- cgit v1.2.1 From f4cdb6a00c148e7724ada0998643b293a52b5f62 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 12 Mar 2013 16:06:07 +0100 Subject: MIPS: SEAD3: Enable LL/SC. All synthesizable CPU cores that could be loaded into a SEAD3's FPGA are MIPS32 or MIPS64 CPUs that have ll/sc. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h index b40f37fb3dee..193c0912d38e 100644 --- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h @@ -28,7 +28,7 @@ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ -#define cpu_has_llsc 0 +#define cpu_has_llsc 1 /* #define cpu_has_vtag_icache ? */ /* #define cpu_has_dc_aliases ? */ /* #define cpu_has_ic_fills_f_dc ? */ -- cgit v1.2.1 From c6432ea9cc043994d5b7dcb3ad86a087777cb40c Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Mon, 11 Mar 2013 17:27:02 +0000 Subject: regmap: Initialize `map->debugfs' before regcache In the rbtree code we are exposing statistics relating to the number of nodes/registers of the rbtree cache for each of the devices. Ensure that `map->debugfs' has been initialized before we attempt to initialize the debugfs entry for the rbtree cache. Signed-off-by: Dimitris Papastamos Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/base/regmap/regmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 3d2367501fd0..50ef277ea4b6 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -710,12 +710,12 @@ skip_format_initialization: } } + regmap_debugfs_init(map, config->name); + ret = regcache_init(map, config); if (ret != 0) goto err_range; - regmap_debugfs_init(map, config->name); - /* Add a devres resource for dev_get_regmap() */ m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL); if (!m) { -- cgit v1.2.1 From f4b828128ab64fd9dc5eec9525b38fbfeafa5c0e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 12 Mar 2013 00:23:15 +0800 Subject: ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff() 'file' is malloced in wm_adsp_load_coeff() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index f3f7e75f8628..9af1bddc4c62 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -828,7 +828,8 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp) &buf_list); if (!buf) { adsp_err(dsp, "Out of memory\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out_fw; } adsp_dbg(dsp, "%s.%d: Writing %d bytes at %x\n", @@ -865,7 +866,7 @@ out_fw: wm_adsp_buf_free(&buf_list); out: kfree(file); - return 0; + return ret; } int wm_adsp1_init(struct wm_adsp *adsp) -- cgit v1.2.1 From e8b18addee32d1f389573b4c116e67ae230216ad Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 12 Mar 2013 00:35:14 +0800 Subject: ASoC: core: fix possible memory leak in snd_soc_bytes_put() 'data' is malloced in snd_soc_bytes_put() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index b7e84a7cd9ee..93341deaa4b9 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3140,7 +3140,7 @@ int snd_soc_bytes_put(struct snd_kcontrol *kcontrol, if (params->mask) { ret = regmap_read(codec->control_data, params->base, &val); if (ret != 0) - return ret; + goto out; val &= params->mask; @@ -3158,13 +3158,15 @@ int snd_soc_bytes_put(struct snd_kcontrol *kcontrol, ((u32 *)data)[0] |= cpu_to_be32(val); break; default: - return -EINVAL; + ret = -EINVAL; + goto out; } } ret = regmap_raw_write(codec->control_data, params->base, data, len); +out: kfree(data); return ret; -- cgit v1.2.1 From b6e51600f4e983e757b1b6942becaa1ae7d82e67 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sun, 10 Mar 2013 19:33:03 +0100 Subject: ASoC: imx-ssi: Fix occasional AC97 reset failure Signed-off-by: Sascha Hauer Signed-off-by: Markus Pargmann Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/fsl/imx-ssi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 55464a5b0706..810c7eeb7b03 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -496,6 +496,8 @@ static void imx_ssi_ac97_reset(struct snd_ac97 *ac97) if (imx_ssi->ac97_reset) imx_ssi->ac97_reset(ac97); + /* First read sometimes fails, do a dummy read */ + imx_ssi_ac97_read(ac97, 0); } static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97) @@ -504,6 +506,9 @@ static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97) if (imx_ssi->ac97_warm_reset) imx_ssi->ac97_warm_reset(ac97); + + /* First read sometimes fails, do a dummy read */ + imx_ssi_ac97_read(ac97, 0); } struct snd_ac97_bus_ops soc_ac97_ops = { -- cgit v1.2.1 From 34913fd950dc1817d466d76bdccd63443fdcbb12 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sun, 10 Mar 2013 19:33:06 +0100 Subject: ASoC: pcm030 audio fabric: remove __init from probe Remove probe function from the init section. Signed-off-by: Markus Pargmann Signed-off-by: Mark Brown --- sound/soc/fsl/pcm030-audio-fabric.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c index 8e52c1485df3..eb4373840bb6 100644 --- a/sound/soc/fsl/pcm030-audio-fabric.c +++ b/sound/soc/fsl/pcm030-audio-fabric.c @@ -51,7 +51,7 @@ static struct snd_soc_card pcm030_card = { .num_links = ARRAY_SIZE(pcm030_fabric_dai), }; -static int __init pcm030_fabric_probe(struct platform_device *op) +static int pcm030_fabric_probe(struct platform_device *op) { struct device_node *np = op->dev.of_node; struct device_node *platform_np; -- cgit v1.2.1 From d558c4733759e077cf449246983a5d1fe97fc434 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 8 Mar 2013 11:51:19 +0530 Subject: spi: slink-tegra20: move runtime pm calls to transfer_one_message The prepare_transfer_hardware() is called in atomic context and calling synchronous runtime pm calls can create scheduling deadlock. Therefore, in place of calling runtime PM calls from prepare/unprepare message transfer, calling this in transfer_one_message(). Signed-off-by: Laxman Dewangan Tested-by: Stephen Warren Signed-off-by: Mark Brown --- drivers/spi/spi-tegra20-slink.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index b8698b389ef3..a829563f4713 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -858,21 +858,6 @@ static int tegra_slink_setup(struct spi_device *spi) return 0; } -static int tegra_slink_prepare_transfer(struct spi_master *master) -{ - struct tegra_slink_data *tspi = spi_master_get_devdata(master); - - return pm_runtime_get_sync(tspi->dev); -} - -static int tegra_slink_unprepare_transfer(struct spi_master *master) -{ - struct tegra_slink_data *tspi = spi_master_get_devdata(master); - - pm_runtime_put(tspi->dev); - return 0; -} - static int tegra_slink_transfer_one_message(struct spi_master *master, struct spi_message *msg) { @@ -885,6 +870,12 @@ static int tegra_slink_transfer_one_message(struct spi_master *master, msg->status = 0; msg->actual_length = 0; + ret = pm_runtime_get_sync(tspi->dev); + if (ret < 0) { + dev_err(tspi->dev, "runtime get failed: %d\n", ret); + goto done; + } + single_xfer = list_is_singular(&msg->transfers); list_for_each_entry(xfer, &msg->transfers, transfer_list) { INIT_COMPLETION(tspi->xfer_completion); @@ -921,6 +912,8 @@ static int tegra_slink_transfer_one_message(struct spi_master *master, exit: tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND); tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2); + pm_runtime_put(tspi->dev); +done: msg->status = ret; spi_finalize_current_message(master); return ret; @@ -1148,9 +1141,7 @@ static int tegra_slink_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; master->setup = tegra_slink_setup; - master->prepare_transfer_hardware = tegra_slink_prepare_transfer; master->transfer_one_message = tegra_slink_transfer_one_message; - master->unprepare_transfer_hardware = tegra_slink_unprepare_transfer; master->num_chipselect = MAX_CHIP_SELECT; master->bus_num = -1; -- cgit v1.2.1 From 4a25b680b1e84cf97c740c8005e2c6655d6cfa7f Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Tue, 12 Mar 2013 00:13:36 +0100 Subject: spi/bcm63xx: Remove unused variable This fixes the following warning: drivers/spi/spi-bcm63xx.c: In function 'bcm63xx_spi_setup': drivers/spi/spi-bcm63xx.c:157:6: warning: unused variable 'ret' Signed-off-by: Kevin Cernekee Acked-by: Florian Fainelli Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 9578af782a77..0415a32cce33 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -152,7 +152,6 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi, static int bcm63xx_spi_setup(struct spi_device *spi) { struct bcm63xx_spi *bs; - int ret; bs = spi_master_get_devdata(spi->master); -- cgit v1.2.1 From b435ff212e91bddc2d12e6638a4d846d5f60daa6 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Tue, 12 Mar 2013 00:13:37 +0100 Subject: spi/bcm63xx: don't disable non enabled clocks in probe error path When msg_ctl_width is set to an invalid value we try to disable the clock despite it never being enabled. Fix it by jumping to the correct label. Signed-off-by: Jonas Gorski Acked-by: Florian Fainelli Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 0415a32cce33..d7df435d962e 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -489,7 +489,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) default: dev_err(dev, "unsupported MSG_CTL width: %d\n", bs->msg_ctl_width); - goto out_clk_disable; + goto out_err; } /* Initialize hardware */ -- cgit v1.2.1 From 13872ebb915b547b3c0a1fc04f549a1475bb7989 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 13 Mar 2013 04:10:57 -0600 Subject: ARM: OMAP1: fix USB host on 1710 There is a long-standing bug that OHCI USB host controller does not respond on 1710, because of wrong clock definitions. See e.g. http://marc.info/?l=linux-omap&m=119634441229321&w=2. All register reads return just zeroes: [ 1.896606] ohci ohci: OMAP OHCI [ 1.912597] ohci ohci: new USB bus registered, assigned bus number 1 [ 1.933776] ohci ohci: irq 38, io mem 0xfffba000 [ 2.012573] ohci ohci: init err (00000000 0000) [ 2.030334] ohci ohci: can't start [ 2.046661] ohci ohci: startup error -75 [ 2.063201] ohci ohci: USB bus 1 deregistered After some experiments, it seems that when changing the usb_dc_ck / SOFT_REQ enable bit from USB_REQ_EN_SHIFT to SOFT_USB_OTG_DPLL_REQ_SHIFT (like done also on 7XX), the USB appears to work: [ 2.183959] ohci ohci: OMAP OHCI [ 2.198242] ohci ohci: new USB bus registered, assigned bus number 1 [ 2.215820] ohci ohci: irq 38, io mem 0xfffba000 [ 2.324798] hub 1-0:1.0: USB hub found [ 2.361267] hub 1-0:1.0: 3 ports detected The patch is tested on Nokia 770. Signed-off-by: Aaro Koskinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/clock_data.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index cb7c6ae2e3fc..6c4f766365a2 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = { }; static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = USB_REQ_EN_SHIFT, -}; - -static struct clk usb_dc_ck7xx = { .name = "usb_dc_ck", .ops = &clkops_generic, /* Direct from ULPD, no parent */ @@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), CLK(NULL, "mclk", &mclk_16xx, CK_16XX), CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), -- cgit v1.2.1 From 71b37071f02e20345dcc0d570c69896da795e1e6 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 13 Mar 2013 04:11:23 -0600 Subject: ARM: OMAP4: clock data: lock USB DPLL on boot Some versions of the u-boot bootloader do not lock the USB DPLL and when the USB DPLL is not locked, then it is observed that the L3INIT power domain does not transition to retention state during kernel suspend on OMAP4 devices. Fix this by locking the USB DPLL at 960 MHz on kernel boot. Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cclock44xx_data.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 3d58f335f173..015bcdc34b4a 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -52,6 +52,13 @@ */ #define OMAP4_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section + * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred + * locked frequency for the USB DPLL is 960MHz. + */ +#define OMAP4_DPLL_USB_DEFFREQ 960000000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -1705,5 +1712,13 @@ int __init omap4xxx_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + /* + * Lock USB DPLL on OMAP4 devices so that the L3INIT power + * domain can transition to retention state when not in use. + */ + rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + return 0; } -- cgit v1.2.1 From 092bc089c249de0fa0f0c98b28dea6e5f1367b6e Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Mon, 11 Mar 2013 21:49:00 +0200 Subject: ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb For some unknown reason, allowing hwmod to control MIDLEMODE causes core_pwrdm to not hit idle states for musb in DM3730 at least. I've verified that setting any MIDLEMODE value other than "force standby" before enabling the device causes subsequent suspend attempts to fail with core_pwrdm not entering idle states, even if the driver is unloaded and "force standby" is restored before suspend attempt. To recover from this, soft reset can be used, but that's not suitable solution for suspend. Keeping the register set at force standby (reset value) makes it work and device still functions properly, as musb has driver-controlled OTG_FORCESTDBY register that controls MSTANDBY signal. Note that TI PSP kernels also have similar workarounds. This patch also fixes HWMOD_SWSUP_MSTANDBY documentation to match the actual flag name. Signed-off-by: Grazvydas Ignotas Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 7 +++++-- arch/arm/mach-omap2/omap_hwmod.h | 9 +++++++-- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 7 ++++++- 3 files changed, 18 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c2c798c08c2b..a202a4785104 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if (oh->flags & HWMOD_FORCE_MSTANDBY) { + idlemode = HWMOD_IDLEMODE_FORCE; + } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) @@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if ((oh->flags & HWMOD_SWSUP_MSTANDBY) || + (oh->flags & HWMOD_FORCE_MSTANDBY)) { idlemode = HWMOD_IDLEMODE_FORCE; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d43d9b608eda..d5dc935f6060 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm { * * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby + * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and + * out of standby, rather than relying on module smart-standby * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for * SDRAM controller, etc. XXX probably belongs outside the main hwmod file * XXX Should be HWMOD_SETUP_NO_RESET @@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm { * correctly, or this is being abused to deal with some PM latency * issues -- but we're currently suffering from a shortage of * folks who are able to track these issues down properly. + * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device + * is kept in force-standby mode. Failing to do so causes PM problems + * with musb on OMAP3630 at least. Note that musb has a dedicated register + * to control MSTANDBY signal when MIDLEMODE is set to force-standby. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_16BIT_REG (1 << 8) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) +#define HWMOD_FORCE_MSTANDBY (1 << 11) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ac7e03ec952f..5112d04e7b79 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { * Erratum ID: i479 idle_req / idle_ack mechanism potentially * broken when autoidle is enabled * workaround is to disable the autoidle bit at module level. + * + * Enabling the device in any other MIDLEMODE setting but force-idle + * causes core_pwrdm not enter idle states at least on OMAP3630. + * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY + * signal when MIDLEMODE is set to force-idle. */ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE - | HWMOD_SWSUP_MSTANDBY, + | HWMOD_FORCE_MSTANDBY, }; /* usb_otg_hs */ -- cgit v1.2.1 From 92702df3570e1ccfa050e135e50c450502251b79 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 12 Feb 2013 20:28:12 +0000 Subject: ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 17b7e7d33530e2bbd3bdc90f4db09b91cfdde2bb ("ARM: OMAP4: clock/hwmod data: start to remove some IP block control "clocks"") introduced a regression preventing the L3INIT clockdomain of OMAP4 systems from entering idle. This in turn prevented these systems from entering full chip clock-stop. The regression was caused by the incorrect removal of a so-called "optional functional clock" from the OMAP4 clock data. This wasn't caught for two reasons. First, I missed the retention entry failure in the branch test logs: http://www.pwsan.com/omap/testlogs/cleanup_a_3.9/20130126014242/pm/4460pandaes/4460pandaes_log.txt Second, the integration data for the OCP2SCP PHY IP block, added by commit 0c6688753f9912c6a7013549ec31c8844020bbc1 ("ARM: OMAP4: hwmod data: add remaining USB-related IP blocks"), should have associated this clock with the IP block, but did not. Fix by adding back the so-called "optional" functional clock to the clock data, and by linking that clock to the OCP2SCP PHY IP block integration hwmod data. The problem patch was discovered by J, Keerthy . Cc: Keerthy Cc: Benoît Cousson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cclock44xx_data.c | 5 +++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 015bcdc34b4a..0c6834ae1fc4 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -1018,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel, OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK, hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops); +DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0, + OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL); + DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); @@ -1545,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0e47d2e1687c..9e0576569e07 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { { } }; +static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = { + { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" }, +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { }, }, .dev_attr = ocp2scp_dev_attr, + .opt_clks = ocp2scp_usb_phy_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks), }; /* -- cgit v1.2.1 From 8abac3ba51b5525354e9b2ec0eed1c9e95c905d9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 13 Mar 2013 16:38:33 +0100 Subject: regmap: cache Fix regcache-rbtree sync The last register block, which falls into the specified range, is not handled correctly. The formula which calculates the number of register which should be synced is inverse (and off by one). E.g. if all registers in that block should be synced only one is synced, and if only one should be synced all (but one) are synced. To calculate the number of registers that need to be synced we need to subtract the number of the first register in the block from the max register number and add one. This patch updates the code accordingly. The issue was introduced in commit ac8d91c ("regmap: Supply ranges to the sync operations"). Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/base/regmap/regcache-rbtree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index e6732cf7c06e..79f4fca9877a 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -398,7 +398,7 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min, base = 0; if (max < rbnode->base_reg + rbnode->blklen) - end = rbnode->base_reg + rbnode->blklen - max; + end = max - rbnode->base_reg + 1; else end = rbnode->blklen; -- cgit v1.2.1 From a4285b99e0087361c61f51c819633382fa659ea6 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 13 Mar 2013 20:54:34 +0100 Subject: MIPS: Fix inconsistent formatting inside /proc/cpuinfo There is a missing " " inside /proc/cpuinfo. The bad commit was: commit a96102be700f87283f168942cd09a2b30f86f324 Author: Steven J. Hill Date: Fri Dec 7 04:31:36 2012 +0000 MIPS: Add printing of ISA version in cpuinfo. Signed-off-by: John Crispin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4988/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 135c4aadccbe..7a54f74b7818 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -67,7 +67,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpu_has_mips_r) { seq_printf(m, "isa\t\t\t:"); if (cpu_has_mips_1) - seq_printf(m, "%s", "mips1"); + seq_printf(m, "%s", " mips1"); if (cpu_has_mips_2) seq_printf(m, "%s", " mips2"); if (cpu_has_mips_3) -- cgit v1.2.1 From 67e753ca41782913d805ff4a8a2b0f60b26b7915 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Thu, 14 Mar 2013 10:49:23 +0200 Subject: UBIFS: make space fixup work in the remount case The UBIFS space fixup is a useful feature which allows to fixup the "broken" flash space at the time of the first mount. The "broken" space is usually the result of using a "dumb" industrial flasher which is not able to skip empty NAND pages and just writes all 0xFFs to the empty space, which has grave side-effects for UBIFS when UBIFS trise to write useful data to those empty pages. The fix-up feature works roughly like this: 1. mkfs.ubifs sets the fixup flag in UBIFS superblock when creating the image (see -F option) 2. when the file-system is mounted for the first time, UBIFS notices the fixup flag and re-writes the entire media atomically, which may take really a lot of time. 3. UBIFS clears the fixup flag in the superblock. This works fine when the file system is mounted R/W for the very first time. But it did not really work in the case when we first mount the file-system R/O, and then re-mount R/W. The reason was that we started the fixup procedure too late, which we cannot really do because we have to fixup the space before it starts being used. Signed-off-by: Artem Bityutskiy Reported-by: Mark Jackson Cc: stable@vger.kernel.org # 3.0+ --- fs/ubifs/super.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index ac838b844936..f21acf0ef01f 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1568,6 +1568,12 @@ static int ubifs_remount_rw(struct ubifs_info *c) c->remounting_rw = 1; c->ro_mount = 0; + if (c->space_fixup) { + err = ubifs_fixup_free_space(c); + if (err) + return err; + } + err = check_free_space(c); if (err) goto out; @@ -1684,12 +1690,6 @@ static int ubifs_remount_rw(struct ubifs_info *c) err = dbg_check_space_info(c); } - if (c->space_fixup) { - err = ubifs_fixup_free_space(c); - if (err) - goto out; - } - mutex_unlock(&c->umount_mutex); return err; -- cgit v1.2.1 From 7f08a89862b96d84c6dfe6c242eb010084e51d3b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 14 Mar 2013 21:26:24 +0100 Subject: ASoC: dapm: Fix pointer dereference in is_connected_output_ep() *path is not yet initialized when we check if the widget is connected. The compiler also warns about this: sound/soc/soc-dapm.c: In function 'is_connected_output_ep': sound/soc/soc-dapm.c:824:18: warning: 'path' may be used uninitialized in this function Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index f3255517de79..ab621b1db105 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -821,7 +821,6 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, (widget->id == snd_soc_dapm_line && !list_empty(&widget->sources))) { widget->outputs = snd_soc_dapm_suspend_check(widget); - path->walking = 0; return widget->outputs; } } -- cgit v1.2.1 From 605c357bb40ce412c086f3a928d07c1d4349b95b Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 15 Mar 2013 19:16:52 -0500 Subject: ARM: ep93xx: Fix wait for UART FIFO to be empty Commit 210dce5f "ARM: ep93xx: properly wait for UART FIFO to be empty" Removed the timeout loop while waiting for the uart transmit fifo to empty. Some bootloaders leave the uart in a state where there might be bytes in the uart that are not transmitted when execution is handed over to the kernel. This results in a deadlocked system while waiting for the fifo to empty. Add back the timeout wait to prevent the deadlock. Increase the wait time to hopefully prevent the decompressor corruption that lead to commit 210dce5f. This corruption was probably due to a slow uart baudrate. The 10* increase in the wait time should be enough for all cases. Signed-off-by: H Hartley Sweeten Acked-by: Florian Fainelli Signed-off-by: Ryan Mallon --- arch/arm/mach-ep93xx/include/mach/uncompress.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index d2afb4dd82ab..b5cc77d2380b 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - /* Transmit fifo not full? */ - while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) - ; + int i; + + for (i = 0; i < 10000; i++) { + /* Transmit fifo not full? */ + if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) + break; + } __raw_writeb(c, PHYS_UART_DATA); } -- cgit v1.2.1 From aabd6a8fa5a933bdf968cd86e34122745c1960e8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sjur=20Br=C3=83=C2=A6ndeland?= Date: Mon, 18 Mar 2013 19:19:14 +1030 Subject: Revert "virtio_console: Initialize guest_connected=true for rproc_serial" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 8078db789a92b10ff6e2d713231b5367e014c53b, and adds a lengthy comment explaining the problem area. The reverted patch caused opening of ports to fail for rproc_serial. In probe guest_connected was set to true, but port_fops_open() fails with -EMFILE if guest_connected already is true. Signed-off-by: Sjur Brændeland Acked-by: Amit Shah Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index e905d5f53051..e6ba6b7887e9 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1436,7 +1436,7 @@ static int add_port(struct ports_device *portdev, u32 id) * rproc_serial does not want the console port, only * the generic port implementation. */ - port->host_connected = port->guest_connected = true; + port->host_connected = true; else if (!use_multiport(port->portdev)) { /* * If we're not using multiport support, @@ -1752,13 +1752,23 @@ static void in_intr(struct virtqueue *vq) port->inbuf = get_inbuf(port); /* - * Don't queue up data when port is closed. This condition + * Normally the port should not accept data when the port is + * closed. For generic serial ports, the host won't (shouldn't) + * send data till the guest is connected. But this condition * can be reached when a console port is not yet connected (no - * tty is spawned) and the host sends out data to console - * ports. For generic serial ports, the host won't - * (shouldn't) send data till the guest is connected. + * tty is spawned) and the other side sends out data over the + * vring, or when a remote devices start sending data before + * the ports are opened. + * + * A generic serial port will discard data if not connected, + * while console ports and rproc-serial ports accepts data at + * any time. rproc-serial is initiated with guest_connected to + * false because port_fops_open expects this. Console ports are + * hooked up with an HVC console and is initialized with + * guest_connected to true. */ - if (!port->guest_connected) + + if (!port->guest_connected && !is_rproc_serial(port->portdev->vdev)) discard_port_data(port); spin_unlock_irqrestore(&port->inbuf_lock, flags); -- cgit v1.2.1 From 63c2b6812f1dc0beda4d6adad0365e048aa693e2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 18 Mar 2013 15:56:10 +0000 Subject: MIPS: Fix code generation for non-DSP capable CPUs Commit 32a7ede (MIPS: dsp: Add assembler support for DSP ASEs) has enabled the use of DSP ASE specific instructions such as rddsp and wrdsp under the idea that all code path that will make use of these two instructions are properly checking for cpu_has_dsp to ensure that the particular CPU we are running on *actually* supports DSP ASE. This commit actually causes the following oops on QEMU Malta emulating a MIPS 24Kc without the DSP ASE implemented: [ 7.960000] Reserved instruction in kernel [ 7.960000] Cpu 0 [ 7.960000] $ 0 : 00000000 00000000 00000014 00000005 [ 7.960000] $ 4 : 8fc2de48 00000001 00000000 8f59ddb0 [ 7.960000] $ 8 : 8f5ceec4 00000018 00000c00 00800000 [ 7.960000] $12 : 00000100 00000200 00000000 00457b84 [ 7.960000] $16 : 00000000 8fc2ba78 8f4ec980 00000001 [ 7.960000] $20 : 80418f90 00000000 00000000 000002dd [ 7.960000] $24 : 0000009c 7730d7b8 [ 7.960000] $28 : 8f59c000 8f59dd38 00000001 80104248 [ 7.960000] Hi : 0000001d [ 7.960000] Lo : 0000000b [ 7.960000] epc : 801041ec thread_saved_pc+0x2c/0x38 [ 7.960000] Not tainted [ 7.960000] ra : 80104248 get_wchan+0x48/0xac [ 7.960000] Status: 1000b703 KERNEL EXL IE [ 7.960000] Cause : 10800028 [ 7.960000] PrId : 00019300 (MIPS 24Kc) [ 7.960000] Modules linked in: [ 7.960000] Process killall (pid: 1574, threadinfo=8f59c000, task=8fd14558, tls=773aa440) [ 7.960000] Stack : 8fc2ba78 8012b008 0000000c 0000001d 00000000 00000000 8f58a380 8f58a380 8fc2ba78 80202668 8f59de78 8f468600 8f59de28 801b2a3c 8f59df00 8f98ba20 74696e69 8f468600 8f59de28 801b7308 0081c007 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8fc2bbb4 00000001 0000001d 0000000b 77f038cc 7fe80648 ffffffff ffffffff 00000000 00000001 0016e000 00000000 ... [ 7.960000] Call Trace: [ 7.960000] [<801041ec>] thread_saved_pc+0x2c/0x38 [ 7.960000] [<80104248>] get_wchan+0x48/0xac The disassembly of thread_saved_pc points to the following: 000006d0 : 6d0: 8c820208 lw v0,520(a0) 6d4: 3c030000 lui v1,0x0 6d8: 24630000 addiu v1,v1,0 6dc: 10430008 beq v0,v1,700 6e0: 00000000 nop 6e4: 3c020000 lui v0,0x0 6e8: 8c43000c lw v1,12(v0) 6ec: 04620004 bltzl v1,700 6f0: 00001021 move v0,zero 6f4: 8c840200 lw a0,512(a0) 6f8: 00031080 sll v0,v1,0x2 6fc: 7c44100a lwx v0,a0(v0) <------------ 700: 03e00008 jr ra 704: 00000000 nop If we specifically disable -mdsp/-mdspr2 for arch/mips/kernel/process.o, we get the following (non-crashing) assembly: 00000708 : 708: 8c820208 lw v0,520(a0) 70c: 3c030000 lui v1,0x0 710: 24630000 addiu v1,v1,0 714: 10430009 beq v0,v1,73c 718: 00000000 nop 71c: 3c020000 lui v0,0x0 720: 8c42000c lw v0,12(v0) 724: 04420005 bltzl v0,73c 728: 00001021 move v0,zero 72c: 8c830200 lw v1,512(a0) 730: 00021080 sll v0,v0,0x2 734: 00431021 addu v0,v0,v1 738: 8c420000 lw v0,0(v0) 73c: 03e00008 jr ra 740: 00000000 nop The specific line that leads a different assembly being produced is: unsigned long thread_saved_pc(struct task_struct *tsk) ... return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; <--- The problem here is that the compiler was given the right to use DSP instructions with the -mdsp / -mdspr2 command-line switches and performed some optimization for us and used DSP ASE instructions where we are not checking that the running CPU actually supports DSP ASE. This patch fixes the issue by partially reverting commit 32a7ede for arch/mips/kernel/Makefile in order to remove the -mdsp / -mdspr2 compiler command-line switches such that we are now guaranteed that the compiler will not optimize using DSP ASE reserved instructions. We also need to fixup the rddsp/wrdsp and m{t,h}{hi,lo}{0,1,2,3} macros in arch/mips/include/asm/mipsregs.h to tell the assembler that we are going to explicitely use DSP ASE reserved instructions. The comment in arch/mips/kernel/Makefile is also updated to reflect that. Signed-off-by: Florian Fainelli Acked-by: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 209 +++++++++++++++++++++++++++++++++++---- arch/mips/kernel/Makefile | 25 ++--- 2 files changed, 196 insertions(+), 38 deletions(-) diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 12b70c25906a..0da44d422f5b 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1166,7 +1166,10 @@ do { \ unsigned int __dspctl; \ \ __asm__ __volatile__( \ + " .set push \n" \ + " .set dsp \n" \ " rddsp %0, %x1 \n" \ + " .set pop \n" \ : "=r" (__dspctl) \ : "i" (mask)); \ __dspctl; \ @@ -1175,30 +1178,198 @@ do { \ #define wrdsp(val, mask) \ do { \ __asm__ __volatile__( \ + " .set push \n" \ + " .set dsp \n" \ " wrdsp %0, %x1 \n" \ + " .set pop \n" \ : \ : "r" (val), "i" (mask)); \ } while (0) -#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) -#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) -#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) -#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;}) - -#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;}) -#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;}) -#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;}) -#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;}) - -#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x)) -#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x)) -#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x)) -#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x)) - -#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x)) -#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x)) -#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x)) -#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x)) +#define mflo0() \ +({ \ + long mflo0; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac0 \n" \ + " .set pop \n" \ + : "=r" (mflo0)); \ + mflo0; \ +}) + +#define mflo1() \ +({ \ + long mflo1; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac1 \n" \ + " .set pop \n" \ + : "=r" (mflo1)); \ + mflo1; \ +}) + +#define mflo2() \ +({ \ + long mflo2; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac2 \n" \ + " .set pop \n" \ + : "=r" (mflo2)); \ + mflo2; \ +}) + +#define mflo3() \ +({ \ + long mflo3; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac3 \n" \ + " .set pop \n" \ + : "=r" (mflo3)); \ + mflo3; \ +}) + +#define mfhi0() \ +({ \ + long mfhi0; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac0 \n" \ + " .set pop \n" \ + : "=r" (mfhi0)); \ + mfhi0; \ +}) + +#define mfhi1() \ +({ \ + long mfhi1; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac1 \n" \ + " .set pop \n" \ + : "=r" (mfhi1)); \ + mfhi1; \ +}) + +#define mfhi2() \ +({ \ + long mfhi2; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac2 \n" \ + " .set pop \n" \ + : "=r" (mfhi2)); \ + mfhi2; \ +}) + +#define mfhi3() \ +({ \ + long mfhi3; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac3 \n" \ + " .set pop \n" \ + : "=r" (mfhi3)); \ + mfhi3; \ +}) + + +#define mtlo0(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac0 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mtlo1(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac1 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mtlo2(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac2 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mtlo3(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac3 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi0(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac0 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi1(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac1 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi2(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac2 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi3(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac3 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) #else diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index f81d98f6184c..de75fb50562b 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -100,29 +100,16 @@ obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o # -# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe -# to enable DSP assembler support here even if the MIPS Release 2 CPU we -# are targetting does not support DSP because all code-paths making use of -# it properly check that the running CPU *actually does* support these -# instructions. +# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not +# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches +# here because the compiler may use DSP ASE instructions (such as lwx) in +# code paths where we cannot check that the CPU we are running on supports it. +# Proper abstraction using HAVE_AS_DSP and macros is done in +# arch/mips/include/asm/mipsregs.h. # ifeq ($(CONFIG_CPU_MIPSR2), y) CFLAGS_DSP = -DHAVE_AS_DSP -# -# Check if assembler supports DSP ASE -# -ifeq ($(call cc-option-yn,-mdsp), y) -CFLAGS_DSP += -mdsp -endif - -# -# Check if assembler supports DSP ASE Rev2 -# -ifeq ($(call cc-option-yn,-mdspr2), y) -CFLAGS_DSP += -mdspr2 -endif - CFLAGS_signal.o = $(CFLAGS_DSP) CFLAGS_signal32.o = $(CFLAGS_DSP) CFLAGS_process.o = $(CFLAGS_DSP) -- cgit v1.2.1 From 97367519d7dac94de566796f034d5f72cbc671f7 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Tue, 19 Mar 2013 13:08:27 +0000 Subject: MIPS: BCM63XX: Make nvram checksum failure non fatal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some vendors modify the nvram layout moving the checksum to a different place or dropping entirely, so reduce the checksum failure to a warning. Reported-by: Álvaro Fernández Rojas Signed-off-by: Jonas Gorski Cc: linux-mips@linux-mips.org Cc: John Crispin Cc: Maxime Bizon Cc: Florian Fainelli Cc: Kevin Cernekee Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 5 +---- arch/mips/bcm63xx/nvram.c | 7 +++---- arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h | 4 +--- 3 files changed, 5 insertions(+), 11 deletions(-) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index ed1949c29508..9aa7d44898ed 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -745,10 +745,7 @@ void __init board_prom_init(void) strcpy(cfe_version, "unknown"); printk(KERN_INFO PFX "CFE version: %s\n", cfe_version); - if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) { - printk(KERN_ERR PFX "invalid nvram checksum\n"); - return; - } + bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET); board_name = bcm63xx_nvram_get_name(); /* find board by name */ diff --git a/arch/mips/bcm63xx/nvram.c b/arch/mips/bcm63xx/nvram.c index 620611680839..a4b8864f9307 100644 --- a/arch/mips/bcm63xx/nvram.c +++ b/arch/mips/bcm63xx/nvram.c @@ -38,7 +38,7 @@ struct bcm963xx_nvram { static struct bcm963xx_nvram nvram; static int mac_addr_used; -int __init bcm63xx_nvram_init(void *addr) +void __init bcm63xx_nvram_init(void *addr) { unsigned int check_len; u32 crc, expected_crc; @@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr) crc = crc32_le(~0, (u8 *)&nvram, check_len); if (crc != expected_crc) - return -EINVAL; - - return 0; + pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n", + expected_crc, crc); } u8 *bcm63xx_nvram_get_name(void) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h index 62d6a3b4d3b7..4e0b6bc1165e 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h @@ -9,10 +9,8 @@ * * Initialized the local nvram copy from the target address and checks * its checksum. - * - * Returns 0 on success. */ -int __init bcm63xx_nvram_init(void *nvram); +void bcm63xx_nvram_init(void *nvram); /** * bcm63xx_nvram_get_name() - returns the board name according to nvram -- cgit v1.2.1 From 1762c5ab7ce5f482aafaf9b6a721e41f073ae3cb Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Tue, 19 Mar 2013 13:20:19 +0000 Subject: Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()" This commit causes a race between PCI scan and SSB fallback SPROM handler registration, causing the wifi to not work on slower systems. The only subsystem touched from board_register_devices is platform device registration, which is safe as an arch init call. This reverts commit d64ed7ada2f689d2c62af1892ca55e47d3653e36 [MIPS: BCM63XX: Call board_register_device from device_initcall()]. Signed-off-by: Jonas Gorski To: linux-mips@linux-mips.org Cc: John Crispin Cc: Maxime Bizon Cc: Florian Fainelli Cc: Kevin Cernekee Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index 314231be788c..35e18e98beb9 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void) return board_register_devices(); } -device_initcall(bcm63xx_register_devices); +arch_initcall(bcm63xx_register_devices); -- cgit v1.2.1 From 2a1486981c1317dc4f4aad568f2cc6e49dfb8c82 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 19 Mar 2013 14:00:53 +0000 Subject: Fix breakage in MIPS siginfo handling MIPS's siginfo handling has been broken since this commit: commit 574c4866e33d648520a8bd5bf6f573ea6e554e88 Author: Al Viro Date: Sun Nov 25 22:24:19 2012 -0500 consolidate kernel-side struct sigaction declarations for 64-bit BE MIPS CPUs. The UAPI variant looks like this: struct sigaction { unsigned int sa_flags; __sighandler_t sa_handler; sigset_t sa_mask; }; but the core kernel's variant looks like this: struct sigaction { #ifndef __ARCH_HAS_ODD_SIGACTION __sighandler_t sa_handler; unsigned long sa_flags; #else unsigned long sa_flags; __sighandler_t sa_handler; #endif #ifdef __ARCH_HAS_SA_RESTORER __sigrestore_t sa_restorer; #endif sigset_t sa_mask; }; The problem is that sa_flags has been changed from an unsigned int to an unsigned long. Fix this by making sa_flags unsigned int if __ARCH_HAS_ODD_SIGACTION is defined. Whilst we're at it, rename __ARCH_HAS_ODD_SIGACTION to __ARCH_HAS_IRIX_SIGACTION. Signed-off-by: David Howells Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Al Viro Signed-off-by: Ralf Baechle --- arch/mips/include/asm/signal.h | 2 +- include/linux/compat.h | 4 ++-- include/linux/signal.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h index 197f6367c201..8efe5a9e2c3e 100644 --- a/arch/mips/include/asm/signal.h +++ b/arch/mips/include/asm/signal.h @@ -21,6 +21,6 @@ #include #include -#define __ARCH_HAS_ODD_SIGACTION +#define __ARCH_HAS_IRIX_SIGACTION #endif /* _ASM_SIGNAL_H */ diff --git a/include/linux/compat.h b/include/linux/compat.h index 76a87fb57ac2..377cd8c3395e 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -141,11 +141,11 @@ typedef struct { } compat_sigset_t; struct compat_sigaction { -#ifndef __ARCH_HAS_ODD_SIGACTION +#ifndef __ARCH_HAS_IRIX_SIGACTION compat_uptr_t sa_handler; compat_ulong_t sa_flags; #else - compat_ulong_t sa_flags; + compat_uint_t sa_flags; compat_uptr_t sa_handler; #endif #ifdef __ARCH_HAS_SA_RESTORER diff --git a/include/linux/signal.h b/include/linux/signal.h index a2dcb94ea49d..9475c5cb28bc 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -250,11 +250,11 @@ extern int show_unhandled_signals; extern int sigsuspend(sigset_t *); struct sigaction { -#ifndef __ARCH_HAS_ODD_SIGACTION +#ifndef __ARCH_HAS_IRIX_SIGACTION __sighandler_t sa_handler; unsigned long sa_flags; #else - unsigned long sa_flags; + unsigned int sa_flags; __sighandler_t sa_handler; #endif #ifdef __ARCH_HAS_SA_RESTORER -- cgit v1.2.1 From b7d44d9487a11e835de10908f4ab30b4290c0b7f Mon Sep 17 00:00:00 2001 From: Satoru Takeuchi Date: Wed, 20 Mar 2013 11:28:51 +1030 Subject: hw_random: free rng_buffer at module exit rng-core module allocates rng_buffer by kmalloc() since commit f7f154f1246ccc5a0a7e9ce50932627d60a0c878. But this buffer won't be freed and there is a memory leak possibility at module exit. Signed-off-by: Satoru Takeuchi Signed-off-by: Rusty Russell --- drivers/char/hw_random/core.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 69ae5972713c..a0f7724852eb 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -380,6 +380,15 @@ void hwrng_unregister(struct hwrng *rng) } EXPORT_SYMBOL_GPL(hwrng_unregister); +static void __exit hwrng_exit(void) +{ + mutex_lock(&rng_mutex); + BUG_ON(current_rng); + kfree(rng_buffer); + mutex_unlock(&rng_mutex); +} + +module_exit(hwrng_exit); MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver"); MODULE_LICENSE("GPL"); -- cgit v1.2.1 From 4480764f57ba494e3f64003e13223c0b5ec6a2ca Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 19 Mar 2013 14:58:43 -0700 Subject: ASoC:: max98090: Remove executable bit Source files shouldn't have the executable bit set. Signed-off-by: Joe Perches Signed-off-by: Mark Brown --- include/sound/max98090.h | 0 sound/soc/codecs/max98090.c | 0 sound/soc/codecs/max98090.h | 0 3 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 include/sound/max98090.h mode change 100755 => 100644 sound/soc/codecs/max98090.c mode change 100755 => 100644 sound/soc/codecs/max98090.h diff --git a/include/sound/max98090.h b/include/sound/max98090.h old mode 100755 new mode 100644 diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c old mode 100755 new mode 100644 diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h old mode 100755 new mode 100644 -- cgit v1.2.1 From 59d9cc2a5073ab4b8c8f8bdbacf230a538abc55d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 18 Mar 2013 18:57:23 +0100 Subject: ASoC: spear_pcm: Update to new pcm_new() API Commit 552d1ef6 ("ASoC: core - Optimise and refactor pcm_new() to pass only rtd") updated the pcm_new() callback to take the rtd as the only parameter. The spear PCM driver (which was merged much later) still uses the old API. This patch updates the driver to the new API. Signed-off-by: Lars-Peter Clausen Acked-by: Rajeev Kumar Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/spear/spear_pcm.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c index 9b76cc5a1148..5e7aebe1e664 100644 --- a/sound/soc/spear/spear_pcm.c +++ b/sound/soc/spear/spear_pcm.c @@ -149,9 +149,9 @@ static void spear_pcm_free(struct snd_pcm *pcm) static u64 spear_pcm_dmamask = DMA_BIT_MASK(32); -static int spear_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, struct snd_pcm *pcm) +static int spear_pcm_new(struct snd_soc_pcm_runtime *rtd) { + struct snd_card *card = rtd->card->snd_card; int ret; if (!card->dev->dma_mask) @@ -159,16 +159,16 @@ static int spear_pcm_new(struct snd_card *card, if (!card->dev->coherent_dma_mask) card->dev->coherent_dma_mask = DMA_BIT_MASK(32); - if (dai->driver->playback.channels_min) { - ret = spear_pcm_preallocate_dma_buffer(pcm, + if (rtd->cpu_dai->driver->playback.channels_min) { + ret = spear_pcm_preallocate_dma_buffer(rtd->pcm, SNDRV_PCM_STREAM_PLAYBACK, spear_pcm_hardware.buffer_bytes_max); if (ret) return ret; } - if (dai->driver->capture.channels_min) { - ret = spear_pcm_preallocate_dma_buffer(pcm, + if (rtd->cpu_dai->driver->capture.channels_min) { + ret = spear_pcm_preallocate_dma_buffer(rtd->pcm, SNDRV_PCM_STREAM_CAPTURE, spear_pcm_hardware.buffer_bytes_max); if (ret) -- cgit v1.2.1 From f7ba716f1e704a00d682a8697108f9c86497c551 Mon Sep 17 00:00:00 2001 From: Silviu-Mihai Popescu Date: Sat, 16 Mar 2013 13:45:34 +0200 Subject: ASoC: core: fix invalid free of devm_ allocated data The objects allocated by devm_* APIs are managed by devres and are freed when the device is detached. Hence there is no need to use kfree() explicitly. Signed-off-by: Silviu-Mihai Popescu Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 93341deaa4b9..507d251916af 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -4199,7 +4199,6 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card, dev_err(card->dev, "ASoC: Property '%s' index %d could not be read: %d\n", propname, 2 * i, ret); - kfree(routes); return -EINVAL; } ret = of_property_read_string_index(np, propname, @@ -4208,7 +4207,6 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card, dev_err(card->dev, "ASoC: Property '%s' index %d could not be read: %d\n", propname, (2 * i) + 1, ret); - kfree(routes); return -EINVAL; } } -- cgit v1.2.1 From bec964ed3b2549086e1fdfbf7f1ce8c22f89baa4 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 20 Mar 2013 10:50:50 +0100 Subject: NFC: llcp: Detach socket from process context only when releasing the socket Calling sock_orphan when e.g. the NFC adapter is removed can lead to kernel crashes when e.g. a connection less client is sleeping on the Rx workqueue, waiting for data to show up. Signed-off-by: Samuel Ortiz --- net/nfc/llcp/llcp.c | 6 ------ net/nfc/llcp/sock.c | 2 -- 2 files changed, 8 deletions(-) diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index b530afadd76c..336813ff8cd5 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -107,8 +107,6 @@ static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen, accept_sk->sk_state_change(sk); bh_unlock_sock(accept_sk); - - sock_orphan(accept_sk); } if (listen == true) { @@ -134,8 +132,6 @@ static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen, bh_unlock_sock(sk); - sock_orphan(sk); - sk_del_node_init(sk); } @@ -164,8 +160,6 @@ static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen, bh_unlock_sock(sk); - sock_orphan(sk); - sk_del_node_init(sk); } diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index 5c7cdf3f2a83..e488e440186a 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -464,8 +464,6 @@ static int llcp_sock_release(struct socket *sock) nfc_llcp_accept_unlink(accept_sk); release_sock(accept_sk); - - sock_orphan(accept_sk); } } -- cgit v1.2.1 From 0017c0b57500606aab894cdb02fdf3380ddd60ee Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 11 Mar 2013 10:32:16 +0100 Subject: xfrm: Fix replay notification for esn. We may miscalculate the sequence number difference from the last time we send a notification if a sequence number wrap occured in the meantime. We fix this by adding a separate replay notify function for esn. Here we take the high bits of the sequence number into account to calculate the difference. Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_replay.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 67 insertions(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index 35754cc8a9e5..a3906737f49e 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -334,6 +334,72 @@ static void xfrm_replay_notify_bmp(struct xfrm_state *x, int event) x->xflags &= ~XFRM_TIME_DEFER; } +static void xfrm_replay_notify_esn(struct xfrm_state *x, int event) +{ + u32 seq_diff, oseq_diff; + struct km_event c; + struct xfrm_replay_state_esn *replay_esn = x->replay_esn; + struct xfrm_replay_state_esn *preplay_esn = x->preplay_esn; + + /* we send notify messages in case + * 1. we updated on of the sequence numbers, and the seqno difference + * is at least x->replay_maxdiff, in this case we also update the + * timeout of our timer function + * 2. if x->replay_maxage has elapsed since last update, + * and there were changes + * + * The state structure must be locked! + */ + + switch (event) { + case XFRM_REPLAY_UPDATE: + if (!x->replay_maxdiff) + break; + + if (replay_esn->seq_hi == preplay_esn->seq_hi) + seq_diff = replay_esn->seq - preplay_esn->seq; + else + seq_diff = UINT_MAX - preplay_esn->seq + + replay_esn->seq; + + if (replay_esn->oseq_hi == preplay_esn->oseq_hi) + oseq_diff = replay_esn->oseq - preplay_esn->oseq; + else + oseq_diff = UINT_MAX - preplay_esn->oseq + + replay_esn->oseq; + + if (seq_diff < x->replay_maxdiff && + oseq_diff < x->replay_maxdiff) { + + if (x->xflags & XFRM_TIME_DEFER) + event = XFRM_REPLAY_TIMEOUT; + else + return; + } + + break; + + case XFRM_REPLAY_TIMEOUT: + if (memcmp(x->replay_esn, x->preplay_esn, + xfrm_replay_state_esn_len(replay_esn)) == 0) { + x->xflags |= XFRM_TIME_DEFER; + return; + } + + break; + } + + memcpy(x->preplay_esn, x->replay_esn, + xfrm_replay_state_esn_len(replay_esn)); + c.event = XFRM_MSG_NEWAE; + c.data.aevent = event; + km_state_notify(x, &c); + + if (x->replay_maxage && + !mod_timer(&x->rtimer, jiffies + x->replay_maxage)) + x->xflags &= ~XFRM_TIME_DEFER; +} + static int xfrm_replay_overflow_esn(struct xfrm_state *x, struct sk_buff *skb) { int err = 0; @@ -510,7 +576,7 @@ static struct xfrm_replay xfrm_replay_esn = { .advance = xfrm_replay_advance_esn, .check = xfrm_replay_check_esn, .recheck = xfrm_replay_recheck_esn, - .notify = xfrm_replay_notify_bmp, + .notify = xfrm_replay_notify_esn, .overflow = xfrm_replay_overflow_esn, }; -- cgit v1.2.1 From cc904c7188c29847817f35e6966fec3014c7479b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 14 Mar 2013 08:35:06 +0200 Subject: iwlwifi: fix length check in multi-TB HCMD As reported by Ben Hutchings, there was a harmless issue in the checks being done on the lengths of the TBs while building the TFD for a multi-TB host command. Cc: stable@vger@kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 8595c16f74de..cb5c6792e3a8 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1264,7 +1264,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { int copy = 0; - if (!cmd->len) + if (!cmd->len[i]) continue; /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */ -- cgit v1.2.1 From 4620020b5d7ca34d1c03fa98b0ca457320cb7d71 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 13 Mar 2013 16:38:32 +0200 Subject: iwlwifi: set rfkill in internal state of the transport We didn't update the internal of the PCIe transport when we read the RFkill state directly. Fix that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/trans.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 17bedc50e753..12c4f31ca8fb 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -475,6 +475,10 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, /* If platform's RF_KILL switch is NOT set to KILL */ hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill && !run_in_rfkill) return -ERFKILL; @@ -641,6 +645,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) { + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); bool hw_rfkill; int err; @@ -656,6 +661,10 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) iwl_enable_rfkill_int(trans); hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); return 0; @@ -694,6 +703,10 @@ static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans, * op_mode. */ hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); } } -- cgit v1.2.1 From 2d5d50ee596361566f7f84300117cba7d7672bc5 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 31 Jan 2013 15:03:55 +0200 Subject: iwlwifi: dvm: don't send HCMD in restart flow There is a race between the restart flow and the workers. The workers are cancelled after the fw is already killed and might send HCMD when there is fw to handle them. Simply check that there is a fw to which the HCMD can be sent before actually sending it. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/lib.c | 9 +++++++++ drivers/net/wireless/iwlwifi/dvm/ucode.c | 4 ++-- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c index 86ea5f4c3939..44ca0e57f9f7 100644 --- a/drivers/net/wireless/iwlwifi/dvm/lib.c +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -1261,6 +1261,15 @@ int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) return -EIO; } + /* + * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag + * in iwl_down but cancel the workers only later. + */ + if (!priv->ucode_loaded) { + IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id); + return -EIO; + } + /* * Synchronous commands from this op-mode must hold * the mutex, this ensures we don't try to send two diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index 736fe9bb140e..1a4ac9236a44 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -367,6 +367,8 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return -EIO; } + priv->ucode_loaded = true; + if (ucode_type != IWL_UCODE_WOWLAN) { /* delay a bit to give rfkill time to run */ msleep(5); @@ -380,8 +382,6 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return ret; } - priv->ucode_loaded = true; - return 0; } -- cgit v1.2.1 From b3155155440190de78fb501953136a6c5b82e327 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Wed, 20 Mar 2013 16:00:16 +0100 Subject: NFC: llcp: Remove possible double call to kfree_skb kfree_skb was called twice when the socket receive queue is full Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- net/nfc/llcp/llcp.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index 336813ff8cd5..ee25f25f0cd6 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -821,7 +821,6 @@ static void nfc_llcp_recv_ui(struct nfc_llcp_local *local, skb_get(skb); } else { pr_err("Receive queue is full\n"); - kfree_skb(skb); } nfc_llcp_sock_put(llcp_sock); @@ -1022,7 +1021,6 @@ static void nfc_llcp_recv_hdlc(struct nfc_llcp_local *local, skb_get(skb); } else { pr_err("Receive queue is full\n"); - kfree_skb(skb); } } -- cgit v1.2.1 From ce1eadda6badef9e4e3460097ede674fca47383d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 Mar 2013 20:26:57 +0100 Subject: cfg80211: fix wdev tracing crash Arend reported a crash in tracing if the driver returns an ERR_PTR() value from the add_virtual_intf() callback. This is due to the tracing then still attempting to dereference the "pointer", fix this by using IS_ERR_OR_NULL(). Reported-by: Arend van Spriel Tested-by: Arend van Spriel Signed-off-by: Johannes Berg --- net/wireless/trace.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 6847d043edea..7586de77a2f8 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -27,7 +27,8 @@ #define WIPHY_PR_ARG __entry->wiphy_name #define WDEV_ENTRY __field(u32, id) -#define WDEV_ASSIGN (__entry->id) = (wdev ? wdev->identifier : 0) +#define WDEV_ASSIGN (__entry->id) = (!IS_ERR_OR_NULL(wdev) \ + ? wdev->identifier : 0) #define WDEV_PR_FMT "wdev(%u)" #define WDEV_PR_ARG (__entry->id) -- cgit v1.2.1 From 8b305780ed0c49a49c6bd58a4372fd6b22a5a71e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Mar 2013 22:25:17 +0100 Subject: mac80211: fix virtual monitor interface locking The virtual monitor interface has a locking issue, it calls into the channel context code with the iflist mutex held which isn't allowed since it is usually acquired the other way around. The mutex is still required for the interface iteration, but need not be held across the channel calls. Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index baaa8608e52d..3bfe2612c8c2 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -349,21 +349,19 @@ static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata) static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; - int ret = 0; + int ret; if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF)) return 0; - mutex_lock(&local->iflist_mtx); + ASSERT_RTNL(); if (local->monitor_sdata) - goto out_unlock; + return 0; sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL); - if (!sdata) { - ret = -ENOMEM; - goto out_unlock; - } + if (!sdata) + return -ENOMEM; /* set up data */ sdata->local = local; @@ -377,13 +375,13 @@ static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) if (WARN_ON(ret)) { /* ok .. stupid driver, it asked for this! */ kfree(sdata); - goto out_unlock; + return ret; } ret = ieee80211_check_queues(sdata); if (ret) { kfree(sdata); - goto out_unlock; + return ret; } ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef, @@ -391,13 +389,14 @@ static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) if (ret) { drv_remove_interface(local, sdata); kfree(sdata); - goto out_unlock; + return ret; } + mutex_lock(&local->iflist_mtx); rcu_assign_pointer(local->monitor_sdata, sdata); - out_unlock: mutex_unlock(&local->iflist_mtx); - return ret; + + return 0; } static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) @@ -407,14 +406,20 @@ static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF)) return; + ASSERT_RTNL(); + mutex_lock(&local->iflist_mtx); sdata = rcu_dereference_protected(local->monitor_sdata, lockdep_is_held(&local->iflist_mtx)); - if (!sdata) - goto out_unlock; + if (!sdata) { + mutex_unlock(&local->iflist_mtx); + return; + } rcu_assign_pointer(local->monitor_sdata, NULL); + mutex_unlock(&local->iflist_mtx); + synchronize_net(); ieee80211_vif_release_channel(sdata); @@ -422,8 +427,6 @@ static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) drv_remove_interface(local, sdata); kfree(sdata); - out_unlock: - mutex_unlock(&local->iflist_mtx); } /* -- cgit v1.2.1 From 383efcd00053ec40023010ce5034bd702e7ab373 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 18 Mar 2013 12:22:34 -0700 Subject: sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s try_to_wake_up_local() should only be invoked to wake up another task in the same runqueue and BUG_ON()s are used to enforce the rule. Missing try_to_wake_up_local() can stall workqueue execution but such stalls are likely to be finite either by another work item being queued or the one blocked getting unblocked. There's no reason to trigger BUG while holding rq lock crashing the whole system. Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s. Signed-off-by: Tejun Heo Acked-by: Steven Rostedt Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20130318192234.GD3042@htj.dyndns.org Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index b7b03cd2d4cd..306943f531a3 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1488,8 +1488,10 @@ static void try_to_wake_up_local(struct task_struct *p) { struct rq *rq = task_rq(p); - BUG_ON(rq != this_rq()); - BUG_ON(p == current); + if (WARN_ON_ONCE(rq != this_rq()) || + WARN_ON_ONCE(p == current)) + return; + lockdep_assert_held(&rq->lock); if (!raw_spin_trylock(&p->pi_lock)) { -- cgit v1.2.1 From 0e48026ae7abf871e51eaa9183c81ab5bef4c267 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 19 Mar 2013 16:10:38 +0100 Subject: perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer() This patch fixes an uninitialized pt_regs struct in drain BTS function. The pt_regs struct is propagated all the way to the code_get_segment() function from perf_instruction_pointer() and may get garbage. We cannot simply inherit the actual pt_regs from the interrupt because BTS must be flushed on context-switch or when the associated event is disabled. And there we do not have a pt_regs handy. Setting pt_regs to all zeroes may not be the best option but it is not clear what else to do given where the drain_bts_buffer() is called from. In V2, we move the memset() later in the code to avoid doing it when we end up returning early without doing the actual BTS processing. Also dropped the reg.val initialization because it is redundant with the memset() as suggested by PeterZ. Signed-off-by: Stephane Eranian Acked-by: Peter Zijlstra Cc: peterz@infradead.org Cc: sqazi@google.com Cc: ak@linux.intel.com Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/20130319151038.GA25439@quad Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_ds.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 826054a4f2ee..f71c9f09fd4b 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -314,10 +314,11 @@ int intel_pmu_drain_bts_buffer(void) if (top <= at) return 0; + memset(®s, 0, sizeof(regs)); + ds->bts_index = ds->bts_buffer_base; perf_sample_data_init(&data, 0, event->hw.last_period); - regs.ip = 0; /* * Prepare a generic sample, i.e. fill in the invariant fields. -- cgit v1.2.1 From dd9c086d9f507d02d5ba4d7c5eef4bb9518088b8 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Mon, 18 Mar 2013 14:33:28 +0100 Subject: perf: Fix ring_buffer perf_output_space() boundary calculation This patch fixes a flaw in perf_output_space(). In case the size of the space needed is bigger than the actual buffer size, there may be situations where the function would return true (i.e., there is space) when it should not. head > offset due to rounding of the masking logic. The problem can be tested by activating BTS on Intel processors. A BTS record can be as big as 16 pages. The following command fails: $ perf record -m 4 -c 1 -e branches:u my_test_program You will get a buffer corruption with this. Perf report won't be able to parse the perf.data. The fix is to first check that the requested space is smaller than the buffer size. If so, then the masking logic will work fine. If not, then there is no chance the record can be saved and it will be gracefully handled by upper code layers. [ In v2, we also make the logic for the writable more explicit by renaming it to rb->overwrite because it tells whether or not the buffer can overwrite its tail (suggested by PeterZ). ] Signed-off-by: Stephane Eranian Acked-by: Peter Zijlstra Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: fweisbec@gmail.com Link: http://lkml.kernel.org/r/20130318133327.GA3056@quad Signed-off-by: Ingo Molnar --- kernel/events/internal.h | 2 +- kernel/events/ring_buffer.c | 22 ++++++++++++++++++---- 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/kernel/events/internal.h b/kernel/events/internal.h index d56a64c99a8b..eb675c4d59df 100644 --- a/kernel/events/internal.h +++ b/kernel/events/internal.h @@ -16,7 +16,7 @@ struct ring_buffer { int page_order; /* allocation order */ #endif int nr_pages; /* nr of data pages */ - int writable; /* are we writable */ + int overwrite; /* can overwrite itself */ atomic_t poll; /* POLL_ for wakeups */ diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c index 23cb34ff3973..97fddb09762b 100644 --- a/kernel/events/ring_buffer.c +++ b/kernel/events/ring_buffer.c @@ -18,12 +18,24 @@ static bool perf_output_space(struct ring_buffer *rb, unsigned long tail, unsigned long offset, unsigned long head) { - unsigned long mask; + unsigned long sz = perf_data_size(rb); + unsigned long mask = sz - 1; - if (!rb->writable) + /* + * check if user-writable + * overwrite : over-write its own tail + * !overwrite: buffer possibly drops events. + */ + if (rb->overwrite) return true; - mask = perf_data_size(rb) - 1; + /* + * verify that payload is not bigger than buffer + * otherwise masking logic may fail to detect + * the "not enough space" condition + */ + if ((head - offset) > sz) + return false; offset = (offset - tail) & mask; head = (head - tail) & mask; @@ -212,7 +224,9 @@ ring_buffer_init(struct ring_buffer *rb, long watermark, int flags) rb->watermark = max_size / 2; if (flags & RING_BUFFER_WRITABLE) - rb->writable = 1; + rb->overwrite = 0; + else + rb->overwrite = 1; atomic_set(&rb->refcount, 1); -- cgit v1.2.1 From 6c43a519610a5e11af5be707ad88391ce86129ba Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 20 Mar 2013 09:45:22 +0100 Subject: drivers/Kconfig: add several missing GENERIC_HARDIRQS dependencies With this patch an allmodconfig finally builds on s390 again. Fixes these build errors: ERROR: "devm_request_threaded_irq" [drivers/spi/spi-altera.ko] undefined! ERROR: "devm_request_threaded_irq" [drivers/media/platform/sh_veu.ko] undefined! ERROR: "devm_request_threaded_irq" [drivers/dma/dw_dmac.ko] undefined! Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/dma/Kconfig | 1 + drivers/media/platform/Kconfig | 2 +- drivers/spi/Kconfig | 3 ++- 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 80b69971cf28..aeaea32bcfda 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -83,6 +83,7 @@ config INTEL_IOP_ADMA config DW_DMAC tristate "Synopsys DesignWare AHB DMA support" + depends on GENERIC_HARDIRQS select DMA_ENGINE default y if CPU_AT32AP7000 help diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 05d7b6333461..a0639e779973 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -204,7 +204,7 @@ config VIDEO_SAMSUNG_EXYNOS_GSC config VIDEO_SH_VEU tristate "SuperH VEU mem2mem video processing driver" - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f80eee74a311..2be0de920d67 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -55,6 +55,7 @@ comment "SPI Master Controller Drivers" config SPI_ALTERA tristate "Altera SPI Controller" + depends on GENERIC_HARDIRQS select SPI_BITBANG help This is the driver for the Altera SPI Controller. @@ -310,7 +311,7 @@ config SPI_PXA2XX_DMA config SPI_PXA2XX tristate "PXA2xx SSP SPI master" - depends on ARCH_PXA || PCI || ACPI + depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS select PXA_SSP if ARCH_PXA help This enables using a PXA2xx or Sodaville SSP port as a SPI master -- cgit v1.2.1 From 3bff6038f1938d2541943dfde604a9b92f347650 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 18 Mar 2013 16:01:30 +0100 Subject: s390/scm_block: fix printk format string Use hex digits when referring to scm addresses. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/block/scm_blk.c | 4 ++-- drivers/s390/block/scm_drv.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c index 5ac9c935c151..713f0185f96d 100644 --- a/drivers/s390/block/scm_blk.c +++ b/drivers/s390/block/scm_blk.c @@ -307,7 +307,7 @@ static void scm_blk_handle_error(struct scm_request *scmrq) case EQC_WR_PROHIBIT: spin_lock_irqsave(&bdev->lock, flags); if (bdev->state != SCM_WR_PROHIBIT) - pr_info("%lu: Write access to the SCM increment is suspended\n", + pr_info("%lx: Write access to the SCM increment is suspended\n", (unsigned long) bdev->scmdev->address); bdev->state = SCM_WR_PROHIBIT; spin_unlock_irqrestore(&bdev->lock, flags); @@ -445,7 +445,7 @@ void scm_blk_set_available(struct scm_blk_dev *bdev) spin_lock_irqsave(&bdev->lock, flags); if (bdev->state == SCM_WR_PROHIBIT) - pr_info("%lu: Write access to the SCM increment is restored\n", + pr_info("%lx: Write access to the SCM increment is restored\n", (unsigned long) bdev->scmdev->address); bdev->state = SCM_OPER; spin_unlock_irqrestore(&bdev->lock, flags); diff --git a/drivers/s390/block/scm_drv.c b/drivers/s390/block/scm_drv.c index 5f6180d6ff08..c98cf52d78d1 100644 --- a/drivers/s390/block/scm_drv.c +++ b/drivers/s390/block/scm_drv.c @@ -19,7 +19,7 @@ static void scm_notify(struct scm_device *scmdev, enum scm_event event) switch (event) { case SCM_CHANGE: - pr_info("%lu: The capabilities of the SCM increment changed\n", + pr_info("%lx: The capabilities of the SCM increment changed\n", (unsigned long) scmdev->address); SCM_LOG(2, "State changed"); SCM_LOG_STATE(2, scmdev); -- cgit v1.2.1 From 94f9852de86447088e8e3c12d8b5a8f996acee32 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 20 Mar 2013 13:40:54 +0100 Subject: s390/scm_blk: fix error return code in scm_blk_init() Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/block/scm_blk.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c index 713f0185f96d..e9b9c8392832 100644 --- a/drivers/s390/block/scm_blk.c +++ b/drivers/s390/block/scm_blk.c @@ -463,12 +463,15 @@ static int __init scm_blk_init(void) goto out; scm_major = ret; - if (scm_alloc_rqs(nr_requests)) + ret = scm_alloc_rqs(nr_requests); + if (ret) goto out_unreg; scm_debug = debug_register("scm_log", 16, 1, 16); - if (!scm_debug) + if (!scm_debug) { + ret = -ENOMEM; goto out_free; + } debug_register_view(scm_debug, &debug_hex_ascii_view); debug_set_level(scm_debug, 2); -- cgit v1.2.1 From b7fef2dd7217d9e3f35c948e87297451e55c9709 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 21 Mar 2013 08:24:11 +0100 Subject: s390/uaccess: fix clear_user_pt() The page table walker variant of clear_user() is supposed to copy the contents of the empty zero page to user space. However since 238ec4ef "[S390] zero page cache synonyms" empty_zero_page is not anymore the page itself but contains the pointer to the empty zero pages. Therefore the page table walker variant of clear_user() copied the address of the first empty zero page and afterwards more or less random data to user space instead of clearing the given user space range. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/lib/uaccess_pt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index dff631d34b45..6771fdd89377 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -197,7 +197,7 @@ size_t copy_to_user_pt(size_t n, void __user *to, const void *from) static size_t clear_user_pt(size_t n, void __user *to) { - void *zpage = &empty_zero_page; + void *zpage = (void *) empty_zero_page; long done, size, ret; done = 0; -- cgit v1.2.1 From 1fcbba3d65dff8ce9d25e644fcc86fa8c629de7d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 21 Mar 2013 13:07:18 +0100 Subject: s390/3270: fix minor_start issue The 3270 device nodes 227/0 and 228/0 are special. 227/0 is never used, and 228/0 is used to redirect full screen applications from /dev/3270/tub to the real device node of the 3270 terminal. To keep the device names /dev/3270/tty consistent with the minor number the device driver sets minor_start to 0 and skips minor 0. That makes the tty index equivalent to the minor number. But doing so seems to causes problems with init scripts. A better solution is to set minor_start to the correct value of 1 and set name_base to 1 as well. tty_register_device will then automatically create the correct tty name. Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tty3270.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index b907dba24025..cee69dac3e18 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -915,7 +915,7 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty) int i, rc; /* Check if the tty3270 is already there. */ - view = raw3270_find_view(&tty3270_fn, tty->index); + view = raw3270_find_view(&tty3270_fn, tty->index + RAW3270_FIRSTMINOR); if (!IS_ERR(view)) { tp = container_of(view, struct tty3270, view); tty->driver_data = tp; @@ -927,15 +927,16 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty) tp->inattr = TF_INPUT; return tty_port_install(&tp->port, driver, tty); } - if (tty3270_max_index < tty->index) - tty3270_max_index = tty->index; + if (tty3270_max_index < tty->index + 1) + tty3270_max_index = tty->index + 1; /* Allocate tty3270 structure on first open. */ tp = tty3270_alloc_view(); if (IS_ERR(tp)) return PTR_ERR(tp); - rc = raw3270_add_view(&tp->view, &tty3270_fn, tty->index); + rc = raw3270_add_view(&tp->view, &tty3270_fn, + tty->index + RAW3270_FIRSTMINOR); if (rc) { tty3270_free_view(tp); return rc; @@ -1846,12 +1847,12 @@ static const struct tty_operations tty3270_ops = { void tty3270_create_cb(int minor) { - tty_register_device(tty3270_driver, minor, NULL); + tty_register_device(tty3270_driver, minor - RAW3270_FIRSTMINOR, NULL); } void tty3270_destroy_cb(int minor) { - tty_unregister_device(tty3270_driver, minor); + tty_unregister_device(tty3270_driver, minor - RAW3270_FIRSTMINOR); } struct raw3270_notifier tty3270_notifier = @@ -1884,7 +1885,8 @@ static int __init tty3270_init(void) driver->driver_name = "tty3270"; driver->name = "3270/tty"; driver->major = IBM_TTY3270_MAJOR; - driver->minor_start = 0; + driver->minor_start = RAW3270_FIRSTMINOR; + driver->name_base = RAW3270_FIRSTMINOR; driver->type = TTY_DRIVER_TYPE_SYSTEM; driver->subtype = SYSTEM_TYPE_TTY; driver->init_termios = tty_std_termios; -- cgit v1.2.1 From bc8ce4afd7ee7e1421c935d24b1f879f82afdd4e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 20 Mar 2013 17:02:02 -0600 Subject: regmap: don't corrupt work buffer in _regmap_raw_write() _regmap_raw_write() contains code to call regcache_write() to write values to the cache. That code calls memcpy() to copy the value data to the start of the work_buf. However, at least when _regmap_raw_write() is called from _regmap_bus_raw_write(), the value data is in the work_buf, and this memcpy() operation may over-write part of that value data, depending on the value of reg_bytes + pad_bytes. At least when using reg_bytes==1 and pad_bytes==0, corruption of the value data does occur. To solve this, remove the memcpy() operation, and modify the subsequent .parse_val() call to parse the original value buffer directly. At least in the case of 8-bit register address and 16-bit values, and writes of single registers at a time, this memcpy-then-parse combination used to cancel each-other out; for a work-buffer containing xx 89 03, the memcpy changed it to 89 03 03, and the parse_val changed it back to 89 89 03, thus leaving the value uncorrupted. This appears completely accidental though. Since commit 8a819ff "regmap: core: Split out in place value parsing", .parse_val only returns the parsed value, and does not modify the buffer, and hence does not (accidentally) undo the corruption caused by memcpy(). This caused bogus values to get written to HW, thus preventing e.g. audio playback on systems with a WM8903 CODEC. This patch fixes that. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 3d2367501fd0..89a920510e1d 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -943,8 +943,7 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg, unsigned int ival; int val_bytes = map->format.val_bytes; for (i = 0; i < val_len / val_bytes; i++) { - memcpy(map->work_buf, val + (i * val_bytes), val_bytes); - ival = map->format.parse_val(map->work_buf); + ival = map->format.parse_val(val + (i * val_bytes)); ret = regcache_write(map, reg + (i * map->reg_stride), ival); if (ret) { -- cgit v1.2.1 From 417a1178f1bf3cdc606376b3ded3a22489fbb3eb Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 15 Mar 2013 11:26:15 +0100 Subject: ASoC: dma-sh7760: Fix compile error The dma-sh7760 currently fails with the following compile error: sound/soc/sh/dma-sh7760.c:346:2: error: unknown field 'pcm_ops' specified in initializer sound/soc/sh/dma-sh7760.c:346:2: warning: initialization from incompatible pointer type sound/soc/sh/dma-sh7760.c:347:2: error: unknown field 'pcm_new' specified in initializer sound/soc/sh/dma-sh7760.c:347:2: warning: initialization makes integer from pointer without a cast sound/soc/sh/dma-sh7760.c:348:2: error: unknown field 'pcm_free' specified in initializer sound/soc/sh/dma-sh7760.c:348:2: warning: initialization from incompatible pointer type sound/soc/sh/dma-sh7760.c: In function 'sh7760_soc_platform_probe': sound/soc/sh/dma-sh7760.c:353:2: warning: passing argument 2 of 'snd_soc_register_platform' from incompatible pointer type include/sound/soc.h:368:5: note: expected 'struct snd_soc_platform_driver *' but argument is of type 'struct snd_soc_platform *' This is due the misnaming of the snd_soc_platform_driver type name and 'ops' field. The issue was introduced in commit f0fba2a("ASoC: multi-component - ASoC Multi-Component Support"). Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/sh/dma-sh7760.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c index 19eff8fc4fdd..1a8b03e4b41b 100644 --- a/sound/soc/sh/dma-sh7760.c +++ b/sound/soc/sh/dma-sh7760.c @@ -342,8 +342,8 @@ static int camelot_pcm_new(struct snd_soc_pcm_runtime *rtd) return 0; } -static struct snd_soc_platform sh7760_soc_platform = { - .pcm_ops = &camelot_pcm_ops, +static struct snd_soc_platform_driver sh7760_soc_platform = { + .ops = &camelot_pcm_ops, .pcm_new = camelot_pcm_new, .pcm_free = camelot_pcm_free, }; -- cgit v1.2.1 From e651eab0af88aa7a281fe9e8c36c0846552aa7fc Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Mon, 18 Mar 2013 12:24:04 +0100 Subject: ARM: 7677/1: LPAE: Fix mapping in alloc_init_section for unaligned addresses With LPAE enabled, alloc_init_section() does not map the entire address space for unaligned addresses. The issue also reproduced with CMA + LPAE. CMA tries to map 16MB with page granularity mappings during boot. alloc_init_pte() is called and out of 16MB, only 2MB gets mapped and rest remains unaccessible. Because of this OMAP5 boot is broken with CMA + LPAE enabled. Fix the issue by ensuring that the entire addresses are mapped. Signed-off-by: R Sricharan Cc: Catalin Marinas Cc: Christoffer Dall Cc: Santosh Shilimkar Tested-by: Laura Abbott Acked-by: Catalin Marinas Acked-by: Christoffer Dall Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 73 +++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 47 insertions(+), 26 deletions(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e95a996ab78f..78978945492a 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init alloc_init_section(pud_t *pud, unsigned long addr, - unsigned long end, phys_addr_t phys, - const struct mem_type *type) +static void __init map_init_section(pmd_t *pmd, unsigned long addr, + unsigned long end, phys_addr_t phys, + const struct mem_type *type) { - pmd_t *pmd = pmd_offset(pud, addr); - +#ifndef CONFIG_ARM_LPAE /* - * Try a section mapping - end, addr and phys must all be aligned - * to a section boundary. Note that PMDs refer to the individual - * L1 entries, whereas PGDs refer to a group of L1 entries making - * up one logical pointer to an L2 table. + * In classic MMU format, puds and pmds are folded in to + * the pgds. pmd_offset gives the PGD entry. PGDs refer to a + * group of L1 entries making up one logical pointer to + * an L2 table (2MB), where as PMDs refer to the individual + * L1 entries (1MB). Hence increment to get the correct + * offset for odd 1MB sections. + * (See arch/arm/include/asm/pgtable-2level.h) */ - if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) { - pmd_t *p = pmd; - -#ifndef CONFIG_ARM_LPAE - if (addr & SECTION_SIZE) - pmd++; + if (addr & SECTION_SIZE) + pmd++; #endif + do { + *pmd = __pmd(phys | type->prot_sect); + phys += SECTION_SIZE; + } while (pmd++, addr += SECTION_SIZE, addr != end); - do { - *pmd = __pmd(phys | type->prot_sect); - phys += SECTION_SIZE; - } while (pmd++, addr += SECTION_SIZE, addr != end); + flush_pmd_entry(pmd); +} - flush_pmd_entry(p); - } else { +static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, + unsigned long end, phys_addr_t phys, + const struct mem_type *type) +{ + pmd_t *pmd = pmd_offset(pud, addr); + unsigned long next; + + do { /* - * No need to loop; pte's aren't interested in the - * individual L1 entries. + * With LPAE, we must loop over to map + * all the pmds for the given range. */ - alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type); - } + next = pmd_addr_end(addr, end); + + /* + * Try a section mapping - addr, next and phys must all be + * aligned to a section boundary. + */ + if (type->prot_sect && + ((addr | next | phys) & ~SECTION_MASK) == 0) { + map_init_section(pmd, addr, next, phys, type); + } else { + alloc_init_pte(pmd, addr, next, + __phys_to_pfn(phys), type); + } + + phys += next - addr; + + } while (pmd++, addr = next, addr != end); } static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, @@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, do { next = pud_addr_end(addr, end); - alloc_init_section(pud, addr, next, phys, type); + alloc_init_pmd(pud, addr, next, phys, type); phys += next - addr; } while (pud++, addr = next, addr != end); } -- cgit v1.2.1 From c40e3641670eb6ebfdb71d4b0c775416ef95f4f0 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 18 Mar 2013 19:44:14 +0100 Subject: ARM: 7679/1: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n Don't advertise support for the SDIV/UDIV thumb instructions if the kernel is not compiled with support for thumb userspace. This is in line with how we remove the THUMB hwcap in these configurations. Acked-by: Will Deacon Cc: Stepan Moskovchenko Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3f6cbb2e3eda..e2c8bbffb0b1 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -484,7 +484,7 @@ static void __init setup_processor(void) list->elf_name, ENDIANNESS); elf_hwcap = list->elf_hwcap; #ifndef CONFIG_ARM_THUMB - elf_hwcap &= ~HWCAP_THUMB; + elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); #endif feat_v6_fixup(); -- cgit v1.2.1 From 8164f7af88d9ad3a757bd14f634b23997ee77f6b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 18 Mar 2013 19:44:15 +0100 Subject: ARM: 7680/1: Detect support for SDIV/UDIV from ISAR0 register The ISAR0 register indicates support for the SDIV and UDIV instructions in both the Thumb and ARM instruction set. Read the register to detect the supported instructions and update the elf_hwcap mask as appropriate. This is better than adding more and more cpuid checks in proc-v7.S for each new cpu variant that supports these instructions. Acked-by: Will Deacon Cc: Stepan Moskovchenko Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 20 ++++++++++++++++++++ arch/arm/mm/proc-v7.S | 4 ++-- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index e2c8bbffb0b1..f3ac13f69b7a 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -353,6 +353,23 @@ void __init early_print(const char *str, ...) printk("%s", buf); } +static void __init cpuid_init_hwcaps(void) +{ + unsigned int divide_instrs; + + if (cpu_architecture() < CPU_ARCH_ARMv7) + return; + + divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24; + + switch (divide_instrs) { + case 2: + elf_hwcap |= HWCAP_IDIVA; + case 1: + elf_hwcap |= HWCAP_IDIVT; + } +} + static void __init feat_v6_fixup(void) { int id = read_cpuid_id(); @@ -483,6 +500,9 @@ static void __init setup_processor(void) snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c", list->elf_name, ENDIANNESS); elf_hwcap = list->elf_hwcap; + + cpuid_init_hwcaps(); + #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); #endif diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3a3c015f8d5c..bcd3d48922fb 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -420,7 +420,7 @@ __v7_pj4b_proc_info: __v7_ca7mp_proc_info: .long 0x410fc070 .long 0xff0ffff0 - __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + __v7_proc __v7_ca7mp_setup .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info /* @@ -430,7 +430,7 @@ __v7_ca7mp_proc_info: __v7_ca15mp_proc_info: .long 0x410fc0f0 .long 0xff0ffff0 - __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV + __v7_proc __v7_ca15mp_setup .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* -- cgit v1.2.1 From 120ecfafabec382c4feb79ff159ef42a39b6d33b Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Mon, 18 Mar 2013 19:44:16 +0100 Subject: ARM: 7678/1: Work around faulty ISAR0 register in some Krait CPUs Some early versions of the Krait CPU design incorrectly indicate that they only support the UDIV and SDIV instructions in Thumb mode when they actually support them in ARM and Thumb mode. It seems that these CPUs follow the DDI0406B ARM ARM which has two possible values for the divide instructions field, instead of the DDI0406C document which has three possible values. Work around this problem by checking the MIDR against Krait CPUs with this faulty ISAR0 register and force the hwcaps to indicate support in both modes. [sboyd: Rewrote commit text to reflect real reasoning now that we autodetect udiv/sdiv] Signed-off-by: Stepan Moskovchenko Acked-by: Will Deacon Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index bcd3d48922fb..f584d3f5b37c 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -433,6 +433,21 @@ __v7_ca15mp_proc_info: __v7_proc __v7_ca15mp_setup .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info + /* + * Qualcomm Inc. Krait processors. + */ + .type __krait_proc_info, #object +__krait_proc_info: + .long 0x510f0400 @ Required ID value + .long 0xff0ffc00 @ Mask for ID + /* + * Some Krait processors don't indicate support for SDIV and UDIV + * instructions in the ARM instruction set, even though they actually + * do support them. + */ + __v7_proc __v7_setup, hwcaps = HWCAP_IDIV + .size __krait_proc_info, . - __krait_proc_info + /* * Match any ARMv7 processor core. */ -- cgit v1.2.1 From 68a154fc53ddd3f7b33e482847a411bf54a50855 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 20 Mar 2013 17:30:30 +0100 Subject: ARM: 7681/1: hw_breakpoint: use warn_once to avoid spam from reset_ctrl_regs() CPU debug features like hardware break, watchpoints can be used only when the debug mode is enabled and available. Unfortunately on OMAP4 based devices, after a CPU power cycle, the debug feature gets disabled which leads to a flood of messages coming from reset_ctrl_regs() which gets called on every CPU_PM_EXIT with CPUidle enabled. So make use of warn_once() so that system is usable. Thanks to Will for pointers and Lokesh for the analysis of the issue. Tested-by: Lokesh Vutla Signed-off-by: Santosh Shilimkar Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 96093b75ab90..5dc1aa6f0f7d 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused) } if (err) { - pr_warning("CPU %d debug is powered down!\n", cpu); + pr_warn_once("CPU %d debug is powered down!\n", cpu); cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); return; } @@ -987,7 +987,7 @@ clear_vcr: isb(); if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { - pr_warning("CPU %d failed to disable vector catch\n", cpu); + pr_warn_once("CPU %d failed to disable vector catch\n", cpu); return; } @@ -1007,7 +1007,7 @@ clear_vcr: } if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { - pr_warning("CPU %d failed to clear debug register pairs\n", cpu); + pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu); return; } -- cgit v1.2.1 From 4080d2d11a2d572228c2b8d02406e997b87ba6a5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 14 Mar 2013 20:31:37 -0700 Subject: ARM: msm: Stop counting before reprogramming clockevent If the clockevent is forcibly reprogrammed to have a different match value we mistakenly assume the timer is not ticking and program a new match value while the timer is running. Although we clear the timer before programming a new match, it's better to stop the timer before clearing it so that we're sure the proper amount of ticks are counted. Failure to do so can lead to missed ticks and system hangs. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/timer.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 2969027f02fa..f9fd77e8f1f5 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles, { u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); + ctrl &= ~TIMER_ENABLE_EN; + writel_relaxed(ctrl, event_base + TIMER_ENABLE); + + writel_relaxed(ctrl, event_base + TIMER_CLEAR); writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); return 0; -- cgit v1.2.1 From f9f475292dbb0e7035fb6661d1524761ea0888d9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 Mar 2013 15:04:07 +0100 Subject: cfg80211: always check for scan end on P2P device If a P2P device wdev is removed while it has a scan, then the scan completion might crash later as it is already freed by that time. To avoid the crash always check the scan completion when the P2P device is being removed for some reason. If the driver already canceled it, don't want and free it, otherwise warn and leak it to avoid later crashes. In order to do this, locking needs to be changed away from the rdev mutex (which can't always be guaranteed). For now, use the sched_scan_mtx instead, I'll rename it to just scan_mtx in a later patch. Signed-off-by: Johannes Berg --- net/wireless/core.c | 64 ++++++++++++++++++++++++++++++++++++------------- net/wireless/core.h | 3 +++ net/wireless/nl80211.c | 52 +++++++++++++++++++++------------------- net/wireless/scan.c | 8 ++++--- net/wireless/sme.c | 6 +++-- net/wireless/wext-sme.c | 6 +++++ 6 files changed, 92 insertions(+), 47 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 922002105062..11743d48cbc2 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -212,6 +212,39 @@ static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data) rdev_rfkill_poll(rdev); } +void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev) +{ + lockdep_assert_held(&rdev->devlist_mtx); + lockdep_assert_held(&rdev->sched_scan_mtx); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)) + return; + + if (!wdev->p2p_started) + return; + + rdev_stop_p2p_device(rdev, wdev); + wdev->p2p_started = false; + + rdev->opencount--; + + if (rdev->scan_req && rdev->scan_req->wdev == wdev) { + bool busy = work_busy(&rdev->scan_done_wk); + + /* + * If the work isn't pending or running (in which case it would + * be waiting for the lock we hold) the driver didn't properly + * cancel the scan when the interface was removed. In this case + * warn and leak the scan request object to not crash later. + */ + WARN_ON(!busy); + + rdev->scan_req->aborted = true; + ___cfg80211_scan_done(rdev, !busy); + } +} + static int cfg80211_rfkill_set_block(void *data, bool blocked) { struct cfg80211_registered_device *rdev = data; @@ -221,7 +254,8 @@ static int cfg80211_rfkill_set_block(void *data, bool blocked) return 0; rtnl_lock(); - mutex_lock(&rdev->devlist_mtx); + + /* read-only iteration need not hold the devlist_mtx */ list_for_each_entry(wdev, &rdev->wdev_list, list) { if (wdev->netdev) { @@ -231,18 +265,18 @@ static int cfg80211_rfkill_set_block(void *data, bool blocked) /* otherwise, check iftype */ switch (wdev->iftype) { case NL80211_IFTYPE_P2P_DEVICE: - if (!wdev->p2p_started) - break; - rdev_stop_p2p_device(rdev, wdev); - wdev->p2p_started = false; - rdev->opencount--; + /* but this requires it */ + mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); + cfg80211_stop_p2p_device(rdev, wdev); + mutex_unlock(&rdev->sched_scan_mtx); + mutex_unlock(&rdev->devlist_mtx); break; default: break; } } - mutex_unlock(&rdev->devlist_mtx); rtnl_unlock(); return 0; @@ -745,17 +779,13 @@ static void wdev_cleanup_work(struct work_struct *work) wdev = container_of(work, struct wireless_dev, cleanup_work); rdev = wiphy_to_dev(wdev->wiphy); - cfg80211_lock_rdev(rdev); + mutex_lock(&rdev->sched_scan_mtx); if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) { rdev->scan_req->aborted = true; ___cfg80211_scan_done(rdev, true); } - cfg80211_unlock_rdev(rdev); - - mutex_lock(&rdev->sched_scan_mtx); - if (WARN_ON(rdev->sched_scan_req && rdev->sched_scan_req->dev == wdev->netdev)) { __cfg80211_stop_sched_scan(rdev, false); @@ -781,21 +811,19 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev) return; mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); list_del_rcu(&wdev->list); rdev->devlist_generation++; switch (wdev->iftype) { case NL80211_IFTYPE_P2P_DEVICE: - if (!wdev->p2p_started) - break; - rdev_stop_p2p_device(rdev, wdev); - wdev->p2p_started = false; - rdev->opencount--; + cfg80211_stop_p2p_device(rdev, wdev); break; default: WARN_ON_ONCE(1); break; } + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); } EXPORT_SYMBOL(cfg80211_unregister_wdev); @@ -937,6 +965,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, cfg80211_update_iface_num(rdev, wdev->iftype, 1); cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); switch (wdev->iftype) { #ifdef CONFIG_CFG80211_WEXT @@ -968,6 +997,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, break; } wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); rdev->opencount++; mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); diff --git a/net/wireless/core.h b/net/wireless/core.h index 3aec0e429d8a..5845c2b37aa8 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -503,6 +503,9 @@ int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev, void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype, int num); +void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev); + #define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10 #ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d44ab216c0ec..58e13a8c95f9 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4702,14 +4702,19 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) if (!rdev->ops->scan) return -EOPNOTSUPP; - if (rdev->scan_req) - return -EBUSY; + mutex_lock(&rdev->sched_scan_mtx); + if (rdev->scan_req) { + err = -EBUSY; + goto unlock; + } if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) { n_channels = validate_scan_freqs( info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]); - if (!n_channels) - return -EINVAL; + if (!n_channels) { + err = -EINVAL; + goto unlock; + } } else { enum ieee80211_band band; n_channels = 0; @@ -4723,23 +4728,29 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) n_ssids++; - if (n_ssids > wiphy->max_scan_ssids) - return -EINVAL; + if (n_ssids > wiphy->max_scan_ssids) { + err = -EINVAL; + goto unlock; + } if (info->attrs[NL80211_ATTR_IE]) ie_len = nla_len(info->attrs[NL80211_ATTR_IE]); else ie_len = 0; - if (ie_len > wiphy->max_scan_ie_len) - return -EINVAL; + if (ie_len > wiphy->max_scan_ie_len) { + err = -EINVAL; + goto unlock; + } request = kzalloc(sizeof(*request) + sizeof(*request->ssids) * n_ssids + sizeof(*request->channels) * n_channels + ie_len, GFP_KERNEL); - if (!request) - return -ENOMEM; + if (!request) { + err = -ENOMEM; + goto unlock; + } if (n_ssids) request->ssids = (void *)&request->channels[n_channels]; @@ -4876,6 +4887,8 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) kfree(request); } + unlock: + mutex_unlock(&rdev->sched_scan_mtx); return err; } @@ -7749,20 +7762,9 @@ static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info) if (!rdev->ops->stop_p2p_device) return -EOPNOTSUPP; - if (!wdev->p2p_started) - return 0; - - rdev_stop_p2p_device(rdev, wdev); - wdev->p2p_started = false; - - mutex_lock(&rdev->devlist_mtx); - rdev->opencount--; - mutex_unlock(&rdev->devlist_mtx); - - if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) { - rdev->scan_req->aborted = true; - ___cfg80211_scan_done(rdev, true); - } + mutex_lock(&rdev->sched_scan_mtx); + cfg80211_stop_p2p_device(rdev, wdev); + mutex_unlock(&rdev->sched_scan_mtx); return 0; } @@ -8486,7 +8488,7 @@ static int nl80211_add_scan_req(struct sk_buff *msg, struct nlattr *nest; int i; - ASSERT_RDEV_LOCK(rdev); + lockdep_assert_held(&rdev->sched_scan_mtx); if (WARN_ON(!req)) return 0; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index e93bd31d23bb..fd99ea495b7e 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -169,7 +169,7 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak) union iwreq_data wrqu; #endif - ASSERT_RDEV_LOCK(rdev); + lockdep_assert_held(&rdev->sched_scan_mtx); request = rdev->scan_req; @@ -230,9 +230,9 @@ void __cfg80211_scan_done(struct work_struct *wk) rdev = container_of(wk, struct cfg80211_registered_device, scan_done_wk); - cfg80211_lock_rdev(rdev); + mutex_lock(&rdev->sched_scan_mtx); ___cfg80211_scan_done(rdev, false); - cfg80211_unlock_rdev(rdev); + mutex_unlock(&rdev->sched_scan_mtx); } void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) @@ -1062,6 +1062,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, if (IS_ERR(rdev)) return PTR_ERR(rdev); + mutex_lock(&rdev->sched_scan_mtx); if (rdev->scan_req) { err = -EBUSY; goto out; @@ -1168,6 +1169,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, dev_hold(dev); } out: + mutex_unlock(&rdev->sched_scan_mtx); kfree(creq); cfg80211_unlock_rdev(rdev); return err; diff --git a/net/wireless/sme.c b/net/wireless/sme.c index f432bd3755b1..09d994d192ff 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -85,6 +85,7 @@ static int cfg80211_conn_scan(struct wireless_dev *wdev) ASSERT_RTNL(); ASSERT_RDEV_LOCK(rdev); ASSERT_WDEV_LOCK(wdev); + lockdep_assert_held(&rdev->sched_scan_mtx); if (rdev->scan_req) return -EBUSY; @@ -320,11 +321,9 @@ void cfg80211_sme_scan_done(struct net_device *dev) { struct wireless_dev *wdev = dev->ieee80211_ptr; - mutex_lock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx); wdev_lock(wdev); __cfg80211_sme_scan_done(dev); wdev_unlock(wdev); - mutex_unlock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx); } void cfg80211_sme_rx_auth(struct net_device *dev, @@ -924,9 +923,12 @@ int cfg80211_connect(struct cfg80211_registered_device *rdev, int err; mutex_lock(&rdev->devlist_mtx); + /* might request scan - scan_mtx -> wdev_mtx dependency */ + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(dev->ieee80211_ptr); err = __cfg80211_connect(rdev, dev, connect, connkeys, NULL); wdev_unlock(dev->ieee80211_ptr); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); return err; diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c index fb9622f6d99c..e79cb5c0655a 100644 --- a/net/wireless/wext-sme.c +++ b/net/wireless/wext-sme.c @@ -89,6 +89,7 @@ int cfg80211_mgd_wext_siwfreq(struct net_device *dev, cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); if (wdev->sme_state != CFG80211_SME_IDLE) { @@ -135,6 +136,7 @@ int cfg80211_mgd_wext_siwfreq(struct net_device *dev, err = cfg80211_mgd_wext_connect(rdev, wdev); out: wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); return err; @@ -190,6 +192,7 @@ int cfg80211_mgd_wext_siwessid(struct net_device *dev, cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); err = 0; @@ -223,6 +226,7 @@ int cfg80211_mgd_wext_siwessid(struct net_device *dev, err = cfg80211_mgd_wext_connect(rdev, wdev); out: wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); return err; @@ -285,6 +289,7 @@ int cfg80211_mgd_wext_siwap(struct net_device *dev, cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); if (wdev->sme_state != CFG80211_SME_IDLE) { @@ -313,6 +318,7 @@ int cfg80211_mgd_wext_siwap(struct net_device *dev, err = cfg80211_mgd_wext_connect(rdev, wdev); out: wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); return err; -- cgit v1.2.1 From 370bd005937c0e00f9104a602f9fe1dd6b21b54b Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Tue, 19 Mar 2013 17:50:50 -0700 Subject: mac80211: Don't restart sta-timer if not associated. I found another crash when deleting lots of virtual stations in a congested environment. I think the problem is that the ieee80211_mlme_notify_scan_completed could call ieee80211_restart_sta_timer for a stopped interface that was about to be deleted. With the following patch I am unable to reproduce the crash. Signed-off-by: Ben Greear [move check, also make the same change in mesh] Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 3 ++- net/mac80211/mlme.c | 6 ++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 29ce2aa87e7b..4749b3858695 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -1060,7 +1060,8 @@ void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) - if (ieee80211_vif_is_mesh(&sdata->vif)) + if (ieee80211_vif_is_mesh(&sdata->vif) && + ieee80211_sdata_running(sdata)) ieee80211_queue_work(&local->hw, &sdata->work); rcu_read_unlock(); } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 141577412d84..82cc30318a86 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3608,8 +3608,10 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) /* Restart STA timers */ rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) - ieee80211_restart_sta_timer(sdata); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (ieee80211_sdata_running(sdata)) + ieee80211_restart_sta_timer(sdata); + } rcu_read_unlock(); } -- cgit v1.2.1 From 799ef90c55e692e096d8bd9e5871b95264b1e9ba Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 20 Mar 2013 22:59:11 +0100 Subject: xfrm: Fix esn sequence number diff calculation in xfrm_replay_notify_esn() Commit 0017c0b "xfrm: Fix replay notification for esn." is off by one for the sequence number wrapped case as UINT_MAX is 0xffffffff, not 0x100000000. ;) Just calculate the diff like done everywhere else in the file. Signed-off-by: Mathias Krause Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_replay.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index a3906737f49e..8dafe6d3c6e4 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -359,14 +359,12 @@ static void xfrm_replay_notify_esn(struct xfrm_state *x, int event) if (replay_esn->seq_hi == preplay_esn->seq_hi) seq_diff = replay_esn->seq - preplay_esn->seq; else - seq_diff = UINT_MAX - preplay_esn->seq - + replay_esn->seq; + seq_diff = ~preplay_esn->seq + replay_esn->seq + 1; if (replay_esn->oseq_hi == preplay_esn->oseq_hi) oseq_diff = replay_esn->oseq - preplay_esn->oseq; else - oseq_diff = UINT_MAX - preplay_esn->oseq - + replay_esn->oseq; + oseq_diff = ~preplay_esn->oseq + replay_esn->oseq + 1; if (seq_diff < x->replay_maxdiff && oseq_diff < x->replay_maxdiff) { -- cgit v1.2.1 From 3fbd45ca8d1c98f3c2582ef8bc70ade42f70947b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 25 Mar 2013 11:51:14 +0100 Subject: mac80211: fix remain-on-channel cancel crash If a ROC item is canceled just as it expires, the work struct may be scheduled while it is running (and waiting for the mutex). This results in it being run after being freed, which obviously crashes. To fix this don't free it when aborting is requested but instead mark it as "to be freed", which makes the work a no-op and allows freeing it outside. Cc: stable@vger.kernel.org [3.6+] Reported-by: Jouni Malinen Tested-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 6 ++++-- net/mac80211/ieee80211_i.h | 3 ++- net/mac80211/offchannel.c | 23 +++++++++++++++++------ 3 files changed, 23 insertions(+), 9 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index fb306814576a..a6893602f87a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2582,7 +2582,7 @@ static int ieee80211_cancel_roc(struct ieee80211_local *local, list_del(&dep->list); mutex_unlock(&local->mtx); - ieee80211_roc_notify_destroy(dep); + ieee80211_roc_notify_destroy(dep, true); return 0; } @@ -2622,7 +2622,7 @@ static int ieee80211_cancel_roc(struct ieee80211_local *local, ieee80211_start_next_roc(local); mutex_unlock(&local->mtx); - ieee80211_roc_notify_destroy(found); + ieee80211_roc_notify_destroy(found, true); } else { /* work may be pending so use it all the time */ found->abort = true; @@ -2632,6 +2632,8 @@ static int ieee80211_cancel_roc(struct ieee80211_local *local, /* work will clean up etc */ flush_delayed_work(&found->work); + WARN_ON(!found->to_be_freed); + kfree(found); } return 0; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 388580a1bada..7bdefd901f9d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -309,6 +309,7 @@ struct ieee80211_roc_work { struct ieee80211_channel *chan; bool started, abort, hw_begun, notified; + bool to_be_freed; unsigned long hw_start_time; @@ -1347,7 +1348,7 @@ void ieee80211_offchannel_return(struct ieee80211_local *local); void ieee80211_roc_setup(struct ieee80211_local *local); void ieee80211_start_next_roc(struct ieee80211_local *local); void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata); -void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc); +void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free); void ieee80211_sw_roc_work(struct work_struct *work); void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc); diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index cc79b4a2e821..430bd254e496 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -297,10 +297,13 @@ void ieee80211_start_next_roc(struct ieee80211_local *local) } } -void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc) +void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free) { struct ieee80211_roc_work *dep, *tmp; + if (WARN_ON(roc->to_be_freed)) + return; + /* was never transmitted */ if (roc->frame) { cfg80211_mgmt_tx_status(&roc->sdata->wdev, @@ -316,9 +319,12 @@ void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc) GFP_KERNEL); list_for_each_entry_safe(dep, tmp, &roc->dependents, list) - ieee80211_roc_notify_destroy(dep); + ieee80211_roc_notify_destroy(dep, true); - kfree(roc); + if (free) + kfree(roc); + else + roc->to_be_freed = true; } void ieee80211_sw_roc_work(struct work_struct *work) @@ -331,6 +337,9 @@ void ieee80211_sw_roc_work(struct work_struct *work) mutex_lock(&local->mtx); + if (roc->to_be_freed) + goto out_unlock; + if (roc->abort) goto finish; @@ -370,7 +379,7 @@ void ieee80211_sw_roc_work(struct work_struct *work) finish: list_del(&roc->list); started = roc->started; - ieee80211_roc_notify_destroy(roc); + ieee80211_roc_notify_destroy(roc, !roc->abort); if (started) { drv_flush(local, false); @@ -410,7 +419,7 @@ static void ieee80211_hw_roc_done(struct work_struct *work) list_del(&roc->list); - ieee80211_roc_notify_destroy(roc); + ieee80211_roc_notify_destroy(roc, true); /* if there's another roc, start it now */ ieee80211_start_next_roc(local); @@ -460,12 +469,14 @@ void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata) list_for_each_entry_safe(roc, tmp, &tmp_list, list) { if (local->ops->remain_on_channel) { list_del(&roc->list); - ieee80211_roc_notify_destroy(roc); + ieee80211_roc_notify_destroy(roc, true); } else { ieee80211_queue_delayed_work(&local->hw, &roc->work, 0); /* work will clean up etc */ flush_delayed_work(&roc->work); + WARN_ON(!roc->to_be_freed); + kfree(roc); } } -- cgit v1.2.1 From 130549fed828cc34c22624c6195afcf9e7ae56fe Mon Sep 17 00:00:00 2001 From: Gao feng Date: Thu, 21 Mar 2013 19:48:41 +0000 Subject: netfilter: reset nf_trace in nf_reset We forgot to clear the nf_trace of sk_buff in nf_reset, When we use veth device, this nf_trace information will be leaked from one net namespace to another net namespace. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso --- include/linux/skbuff.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 441f5bfdab8e..72b396751de7 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2641,6 +2641,9 @@ static inline void nf_reset(struct sk_buff *skb) nf_bridge_put(skb->nf_bridge); skb->nf_bridge = NULL; #endif +#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE) + skb->nf_trace = 0; +#endif } /* Note: This doesn't put any conntrack and bridge info in dst. */ -- cgit v1.2.1 From 558724a5b2a73ad0c7638e21e8dffc419d267b6c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 22 Mar 2013 01:28:18 +0000 Subject: netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_queue_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c index 1cb48540f86a..42680b2baa11 100644 --- a/net/netfilter/nfnetlink_queue_core.c +++ b/net/netfilter/nfnetlink_queue_core.c @@ -1062,8 +1062,10 @@ static int __init nfnetlink_queue_init(void) #ifdef CONFIG_PROC_FS if (!proc_create("nfnetlink_queue", 0440, - proc_net_netfilter, &nfqnl_file_ops)) + proc_net_netfilter, &nfqnl_file_ops)) { + status = -ENOMEM; goto cleanup_subsys; + } #endif register_netdevice_notifier(&nfqnl_dev_notifier); -- cgit v1.2.1 From deadcfc3324410726cd6a663fb4fc46be595abe7 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 23 Mar 2013 16:57:59 +0100 Subject: netfilter: nfnetlink_acct: return -EINVAL if object name is empty If user-space tries to create accounting object with an empty name, then return -EINVAL. Reported-by: Michael Zintakis Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_acct.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/nfnetlink_acct.c b/net/netfilter/nfnetlink_acct.c index 589d686f0b4c..dc3fd5d44464 100644 --- a/net/netfilter/nfnetlink_acct.c +++ b/net/netfilter/nfnetlink_acct.c @@ -49,6 +49,8 @@ nfnl_acct_new(struct sock *nfnl, struct sk_buff *skb, return -EINVAL; acct_name = nla_data(tb[NFACCT_NAME]); + if (strlen(acct_name) == 0) + return -EINVAL; list_for_each_entry(nfacct, &nfnl_acct_list, head) { if (strncmp(nfacct->name, acct_name, NFACCT_NAME_MAX) != 0) -- cgit v1.2.1 From 382a103b2b528a3085cde4ac56fc69d92a828b72 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 22 Mar 2013 22:30:09 +0100 Subject: mac80211: fix idle handling sequence Corey Richardson reported that my idle handling cleanup (commit fd0f979a1b, "mac80211: simplify idle handling") broke ath9k_htc. The reason appears to be that it wants to go out of idle before switching channels. To fix it, reimplement that sequence. Reported-by: Corey Richardson Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 17 ++++++++++++++--- net/mac80211/ieee80211_i.h | 1 + net/mac80211/iface.c | 2 +- 3 files changed, 16 insertions(+), 4 deletions(-) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 78c0d90dd641..931be419ab5a 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -63,6 +63,7 @@ ieee80211_new_chanctx(struct ieee80211_local *local, enum ieee80211_chanctx_mode mode) { struct ieee80211_chanctx *ctx; + u32 changed; int err; lockdep_assert_held(&local->chanctx_mtx); @@ -76,6 +77,13 @@ ieee80211_new_chanctx(struct ieee80211_local *local, ctx->conf.rx_chains_dynamic = 1; ctx->mode = mode; + /* acquire mutex to prevent idle from changing */ + mutex_lock(&local->mtx); + /* turn idle off *before* setting channel -- some drivers need that */ + changed = ieee80211_idle_off(local); + if (changed) + ieee80211_hw_config(local, changed); + if (!local->use_chanctx) { local->_oper_channel_type = cfg80211_get_chandef_type(chandef); @@ -85,14 +93,17 @@ ieee80211_new_chanctx(struct ieee80211_local *local, err = drv_add_chanctx(local, ctx); if (err) { kfree(ctx); - return ERR_PTR(err); + ctx = ERR_PTR(err); + + ieee80211_recalc_idle(local); + goto out; } } + /* and keep the mutex held until the new chanctx is on the list */ list_add_rcu(&ctx->list, &local->chanctx_list); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); + out: mutex_unlock(&local->mtx); return ctx; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 7bdefd901f9d..5672533a0832 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1362,6 +1362,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, enum nl80211_iftype type); void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata); void ieee80211_remove_interfaces(struct ieee80211_local *local); +u32 ieee80211_idle_off(struct ieee80211_local *local); void ieee80211_recalc_idle(struct ieee80211_local *local); void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata, const int offset); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 3bfe2612c8c2..58150f877ec3 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -78,7 +78,7 @@ void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER); } -static u32 ieee80211_idle_off(struct ieee80211_local *local) +u32 ieee80211_idle_off(struct ieee80211_local *local) { if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) return 0; -- cgit v1.2.1 From 0f49d64c95944f5701216e900b89aab749edcda2 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Wed, 20 Mar 2013 17:56:23 -0700 Subject: mwifiex: reset skb->data after processing PCIe sleep confirm cmd respose This patch is a bug fix for an issue wherein power save was not working for PCIe. This happens because for processing power save sleep confirm command we pull skb so that skb->data points ahead of interface header. We use same skb to get other cmda responses as well. So if we don't push skb after processing cmd response, it results into reduction in skb->len and finally skb->len reaches zero. This causes failure in processing sleep command response. Fix this by pushing skb by INTF_HEADER_LEN at the end of command response processing. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 5c395e2e6a2b..feb204613397 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1508,6 +1508,7 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) } memcpy(adapter->upld_buf, skb->data, min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); + skb_push(skb, INTF_HEADER_LEN); if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, PCI_DMA_FROMDEVICE)) return -1; -- cgit v1.2.1 From 01bdcb626f80838f55ec2af993daef50b9c59c49 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Mon, 25 Mar 2013 11:00:26 -0700 Subject: bnx2fc: Make the fcoe_cltr the SCSI host parent The fcoemon userspace daemon is searching for the a hostX under the the /sys/bus/fcoe/devices/ctlrX/ entries. When interfaces created using fcoe_sysfs and fcoe.ko this linkage is setup correctly, but bnx2fc is not doing the same thing and therefore fcoemon does not create the fcoe interface for bnx2fc. This patch sets up the correct linkage for bnx2fc such that fcoemon will work correctly with fcoe_sysfs and bnx2fc. Signed-off-by: Robert Love Acked-by: Bhanu Prakash Gollapudi --- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 2daf4b0da434..cc4791cf575b 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -2133,6 +2133,7 @@ static int _bnx2fc_create(struct net_device *netdev, } ctlr = bnx2fc_to_ctlr(interface); + cdev = fcoe_ctlr_to_ctlr_dev(ctlr); interface->vlan_id = vlan_id; interface->timer_work_queue = @@ -2143,7 +2144,7 @@ static int _bnx2fc_create(struct net_device *netdev, goto ifput_err; } - lport = bnx2fc_if_create(interface, &interface->hba->pcidev->dev, 0); + lport = bnx2fc_if_create(interface, &cdev->dev, 0); if (!lport) { printk(KERN_ERR PFX "Failed to create interface (%s)\n", netdev->name); @@ -2159,8 +2160,6 @@ static int _bnx2fc_create(struct net_device *netdev, /* Make this master N_port */ ctlr->lp = lport; - cdev = fcoe_ctlr_to_ctlr_dev(ctlr); - if (link_state == BNX2FC_CREATE_LINK_UP) cdev->enabled = FCOE_CTLR_ENABLED; else -- cgit v1.2.1 From f9c4358edb285cead00a0d6cf0644c84ee773026 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Mon, 25 Mar 2013 11:00:27 -0700 Subject: fcoe: Fix deadlock between create and destroy paths We can deadlock (s_active and fcoe_config_mutex) if a port is being destroyed at the same time one is being created. [ 4200.503113] ====================================================== [ 4200.503114] [ INFO: possible circular locking dependency detected ] [ 4200.503116] 3.8.0-rc5+ #8 Not tainted [ 4200.503117] ------------------------------------------------------- [ 4200.503118] kworker/3:2/2492 is trying to acquire lock: [ 4200.503119] (s_active#292){++++.+}, at: [] sysfs_addrm_finish+0x3b/0x70 [ 4200.503127] but task is already holding lock: [ 4200.503128] (fcoe_config_mutex){+.+.+.}, at: [] fcoe_destroy_work+0xe8/0x120 [fcoe] [ 4200.503133] which lock already depends on the new lock. [ 4200.503135] the existing dependency chain (in reverse order) is: [ 4200.503136] -> #1 (fcoe_config_mutex){+.+.+.}: [ 4200.503139] [] lock_acquire+0xa1/0x140 [ 4200.503143] [] mutex_lock_nested+0x6e/0x360 [ 4200.503146] [] fcoe_enable+0x1d/0xb0 [fcoe] [ 4200.503148] [] fcoe_ctlr_enabled+0x2d/0x50 [fcoe] [ 4200.503151] [] store_ctlr_enabled+0x38/0x90 [libfcoe] [ 4200.503154] [] dev_attr_store+0x18/0x30 [ 4200.503157] [] sysfs_write_file+0xe0/0x150 [ 4200.503160] [] vfs_write+0xac/0x180 [ 4200.503162] [] sys_write+0x52/0xa0 [ 4200.503164] [] system_call_fastpath+0x16/0x1b [ 4200.503167] -> #0 (s_active#292){++++.+}: [ 4200.503170] [] __lock_acquire+0x135f/0x1c90 [ 4200.503172] [] lock_acquire+0xa1/0x140 [ 4200.503174] [] sysfs_deactivate+0x116/0x160 [ 4200.503176] [] sysfs_addrm_finish+0x3b/0x70 [ 4200.503178] [] sysfs_hash_and_remove+0x5b/0xb0 [ 4200.503180] [] sysfs_remove_group+0x61/0x100 [ 4200.503183] [] device_remove_groups+0x3b/0x60 [ 4200.503185] [] device_remove_attrs+0x44/0x80 [ 4200.503187] [] device_del+0x127/0x1c0 [ 4200.503189] [] device_unregister+0x22/0x60 [ 4200.503191] [] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe] [ 4200.503194] [] fcoe_interface_cleanup+0x6c/0xa0 [fcoe] [ 4200.503196] [] fcoe_destroy_work+0x105/0x120 [fcoe] [ 4200.503198] [] process_one_work+0x1a1/0x580 [ 4200.503203] [] worker_thread+0x15e/0x440 [ 4200.503205] [] kthread+0xea/0xf0 [ 4200.503207] [] ret_from_fork+0x7c/0xb0 [ 4200.503209] other info that might help us debug this: [ 4200.503211] Possible unsafe locking scenario: [ 4200.503212] CPU0 CPU1 [ 4200.503213] ---- ---- [ 4200.503214] lock(fcoe_config_mutex); [ 4200.503215] lock(s_active#292); [ 4200.503218] lock(fcoe_config_mutex); [ 4200.503219] lock(s_active#292); [ 4200.503221] *** DEADLOCK *** [ 4200.503223] 3 locks held by kworker/3:2/2492: [ 4200.503224] #0: (fcoe){.+.+.+}, at: [] process_one_work+0x13b/0x580 [ 4200.503228] #1: ((&port->destroy_work)){+.+.+.}, at: [] process_one_work+0x13b/0x580 [ 4200.503232] #2: (fcoe_config_mutex){+.+.+.}, at: [] fcoe_destroy_work+0xe8/0x120 [fcoe] [ 4200.503236] stack backtrace: [ 4200.503238] Pid: 2492, comm: kworker/3:2 Not tainted 3.8.0-rc5+ #8 [ 4200.503240] Call Trace: [ 4200.503243] [] print_circular_bug+0x1fb/0x20c [ 4200.503246] [] __lock_acquire+0x135f/0x1c90 [ 4200.503248] [] ? debug_check_no_locks_freed+0x9a/0x180 [ 4200.503250] [] lock_acquire+0xa1/0x140 [ 4200.503253] [] ? sysfs_addrm_finish+0x3b/0x70 [ 4200.503255] [] sysfs_deactivate+0x116/0x160 [ 4200.503258] [] ? sysfs_addrm_finish+0x3b/0x70 [ 4200.503260] [] sysfs_addrm_finish+0x3b/0x70 [ 4200.503262] [] sysfs_hash_and_remove+0x5b/0xb0 [ 4200.503265] [] sysfs_remove_group+0x61/0x100 [ 4200.503273] [] device_remove_groups+0x3b/0x60 [ 4200.503275] [] device_remove_attrs+0x44/0x80 [ 4200.503277] [] device_del+0x127/0x1c0 [ 4200.503279] [] device_unregister+0x22/0x60 [ 4200.503282] [] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe] [ 4200.503285] [] fcoe_interface_cleanup+0x6c/0xa0 [fcoe] [ 4200.503287] [] fcoe_destroy_work+0x105/0x120 [fcoe] [ 4200.503290] [] process_one_work+0x1a1/0x580 [ 4200.503292] [] ? process_one_work+0x13b/0x580 [ 4200.503295] [] ? fcoe_if_destroy+0x230/0x230 [fcoe] [ 4200.503297] [] worker_thread+0x15e/0x440 [ 4200.503299] [] ? busy_worker_rebind_fn+0x100/0x100 [ 4200.503301] [] kthread+0xea/0xf0 [ 4200.503304] [] ? kthread_create_on_node+0x160/0x160 [ 4200.503306] [] ret_from_fork+0x7c/0xb0 [ 4200.503308] [] ? kthread_create_on_node+0x160/0x160 Signed-off-by: Robert Love Tested-by: Jack Morgan --- drivers/scsi/fcoe/fcoe.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index b5d92fc93c70..9bfdc9a3f897 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -490,7 +490,6 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe) { struct net_device *netdev = fcoe->netdev; struct fcoe_ctlr *fip = fcoe_to_ctlr(fcoe); - struct fcoe_ctlr_device *ctlr_dev = fcoe_ctlr_to_ctlr_dev(fip); rtnl_lock(); if (!fcoe->removed) @@ -501,7 +500,6 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe) /* tear-down the FCoE controller */ fcoe_ctlr_destroy(fip); scsi_host_put(fip->lp->host); - fcoe_ctlr_device_delete(ctlr_dev); dev_put(netdev); module_put(THIS_MODULE); } @@ -2194,6 +2192,8 @@ out_nodev: */ static void fcoe_destroy_work(struct work_struct *work) { + struct fcoe_ctlr_device *cdev; + struct fcoe_ctlr *ctlr; struct fcoe_port *port; struct fcoe_interface *fcoe; struct Scsi_Host *shost; @@ -2224,10 +2224,15 @@ static void fcoe_destroy_work(struct work_struct *work) mutex_lock(&fcoe_config_mutex); fcoe = port->priv; + ctlr = fcoe_to_ctlr(fcoe); + cdev = fcoe_ctlr_to_ctlr_dev(ctlr); + fcoe_if_destroy(port->lport); fcoe_interface_cleanup(fcoe); mutex_unlock(&fcoe_config_mutex); + + fcoe_ctlr_device_delete(cdev); } /** @@ -2335,7 +2340,9 @@ static int _fcoe_create(struct net_device *netdev, enum fip_state fip_mode, rc = -EIO; rtnl_unlock(); fcoe_interface_cleanup(fcoe); - goto out_nortnl; + mutex_unlock(&fcoe_config_mutex); + fcoe_ctlr_device_delete(ctlr_dev); + goto out; } /* Make this the "master" N_Port */ @@ -2375,8 +2382,8 @@ static int _fcoe_create(struct net_device *netdev, enum fip_state fip_mode, out_nodev: rtnl_unlock(); -out_nortnl: mutex_unlock(&fcoe_config_mutex); +out: return rc; } -- cgit v1.2.1 From 8a9a71381208b2364a2d12b0d257ae333917a1bc Mon Sep 17 00:00:00 2001 From: Robert Love Date: Mon, 25 Mar 2013 11:00:27 -0700 Subject: libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer initialization Currently libfcoe is doing some libfc discovery layer initialization outside of libfc. This patch moves this code into libfc and sets up a split in discovery (one time) initialization code and (re-configurable) settings that will come in the next patch. Signed-off-by: Robert Love Tested-by: Jack Morgan Reviewed-by: Bhanu Prakash Gollapudi --- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +- drivers/scsi/fcoe/fcoe_ctlr.c | 11 ++++++----- drivers/scsi/libfc/fc_disc.c | 5 +++-- include/scsi/libfc.h | 2 +- 4 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index cc4791cf575b..b867b1bfa908 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -939,7 +939,7 @@ static int bnx2fc_libfc_config(struct fc_lport *lport) fc_elsct_init(lport); fc_exch_init(lport); fc_rport_init(lport); - fc_disc_init(lport); + fc_disc_init(lport, lport); return 0; } diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 08c3bc398da2..ba2f977a6e1d 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -2826,6 +2826,8 @@ unlock: int fcoe_libfc_config(struct fc_lport *lport, struct fcoe_ctlr *fip, const struct libfc_function_template *tt, int init_fcp) { + void *priv = lport; + /* Set the function pointers set by the LLDD */ memcpy(&lport->tt, tt, sizeof(*tt)); if (init_fcp && fc_fcp_init(lport)) @@ -2842,12 +2844,11 @@ int fcoe_libfc_config(struct fc_lport *lport, struct fcoe_ctlr *fip, lport->tt.disc_start = fcoe_ctlr_disc_start; lport->tt.disc_stop = fcoe_ctlr_disc_stop; lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final; - mutex_init(&lport->disc.disc_mutex); - INIT_LIST_HEAD(&lport->disc.rports); - lport->disc.priv = fip; - } else { - fc_disc_init(lport); + priv = fip; } + + fc_disc_init(lport, priv); + return 0; } EXPORT_SYMBOL_GPL(fcoe_libfc_config); diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 8e561e6a557c..141c54b97082 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -714,8 +714,9 @@ static void fc_disc_stop_final(struct fc_lport *lport) /** * fc_disc_init() - Initialize the discovery layer for a local port * @lport: The local port that needs the discovery layer to be initialized + * @priv: Private data structre for users of the discovery layer */ -int fc_disc_init(struct fc_lport *lport) +int fc_disc_init(struct fc_lport *lport, void *priv) { struct fc_disc *disc; @@ -736,7 +737,7 @@ int fc_disc_init(struct fc_lport *lport) mutex_init(&disc->disc_mutex); INIT_LIST_HEAD(&disc->rports); - disc->priv = lport; + disc->priv = priv; return 0; } diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 399162b50a8d..add2a498bd44 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -1074,7 +1074,7 @@ void fc_rport_terminate_io(struct fc_rport *); /* * DISCOVERY LAYER *****************************/ -int fc_disc_init(struct fc_lport *); +int fc_disc_init(struct fc_lport *, void *); static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc) { -- cgit v1.2.1 From 0807619d3c64d935c257a377ac86982c777f969c Mon Sep 17 00:00:00 2001 From: Robert Love Date: Mon, 25 Mar 2013 11:00:28 -0700 Subject: libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config} Split discovery initialization in code that is setup once (fcoe_disc_init) and code that can be re-configured (fcoe_disc_config). Signed-off-by: Robert Love Tested-by: Jack Morgan Reviewed-by: Bhanu Prakash Gollapudi --- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 3 ++- drivers/scsi/fcoe/fcoe_ctlr.c | 3 ++- drivers/scsi/libfc/fc_disc.c | 25 +++++++++++++++++-------- include/scsi/libfc.h | 3 ++- 4 files changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index b867b1bfa908..90bc7bd00966 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -939,7 +939,8 @@ static int bnx2fc_libfc_config(struct fc_lport *lport) fc_elsct_init(lport); fc_exch_init(lport); fc_rport_init(lport); - fc_disc_init(lport, lport); + fc_disc_init(lport); + fc_disc_config(lport, lport); return 0; } diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index ba2f977a6e1d..34ee56cf4bcc 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -2847,7 +2847,8 @@ int fcoe_libfc_config(struct fc_lport *lport, struct fcoe_ctlr *fip, priv = fip; } - fc_disc_init(lport, priv); + fc_disc_init(lport); + fc_disc_config(lport, priv); return 0; } diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 141c54b97082..880a9068ca12 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -712,13 +712,13 @@ static void fc_disc_stop_final(struct fc_lport *lport) } /** - * fc_disc_init() - Initialize the discovery layer for a local port - * @lport: The local port that needs the discovery layer to be initialized + * fc_disc_config() - Configure the discovery layer for a local port + * @lport: The local port that needs the discovery layer to be configured * @priv: Private data structre for users of the discovery layer */ -int fc_disc_init(struct fc_lport *lport, void *priv) +void fc_disc_config(struct fc_lport *lport, void *priv) { - struct fc_disc *disc; + struct fc_disc *disc = &lport->disc; if (!lport->tt.disc_start) lport->tt.disc_start = fc_disc_start; @@ -733,12 +733,21 @@ int fc_disc_init(struct fc_lport *lport, void *priv) lport->tt.disc_recv_req = fc_disc_recv_req; disc = &lport->disc; - INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout); - mutex_init(&disc->disc_mutex); - INIT_LIST_HEAD(&disc->rports); disc->priv = priv; +} +EXPORT_SYMBOL(fc_disc_config); - return 0; +/** + * fc_disc_init() - Initialize the discovery layer for a local port + * @lport: The local port that needs the discovery layer to be initialized + */ +void fc_disc_init(struct fc_lport *lport) +{ + struct fc_disc *disc = &lport->disc; + + INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout); + mutex_init(&disc->disc_mutex); + INIT_LIST_HEAD(&disc->rports); } EXPORT_SYMBOL(fc_disc_init); diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index add2a498bd44..e1379b4e8faf 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -1074,7 +1074,8 @@ void fc_rport_terminate_io(struct fc_rport *); /* * DISCOVERY LAYER *****************************/ -int fc_disc_init(struct fc_lport *, void *); +void fc_disc_init(struct fc_lport *); +void fc_disc_config(struct fc_lport *, void *); static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc) { -- cgit v1.2.1 From 0db0e377ab5be5d507a2fca3d78215cd2e83b974 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Mon, 25 Mar 2013 11:00:28 -0700 Subject: libfcoe: Fix fcoe_sysfs VN2VN mode The libfc discovery layer is being initialized in the 'create' paths for both legacy libfcoe module parameters and fcoe_sysfs control interfaces. The problem is that for VN2VN mode the discovery layer is initialized as if it were in 'fabric' mode and it is not re-configured when the mode is changed to 'vn2vn'. This patch splits out code that needs to be initialized once and code that can, and should be, re-configured when the mode changes. Additionally this patch makes that change so that the discovery layer can be reconfigured to the libfcoe implementation when in 'vn2vn' mode. Signed-off-by: Robert Love Tested-by: Jack Morgan Reviewed-by: Bhanu Prakash Gollapudi --- drivers/scsi/fcoe/fcoe_ctlr.c | 60 ++++++++++++++++++++++++++++++++----------- 1 file changed, 45 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 34ee56cf4bcc..a76247201be5 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -2814,6 +2814,47 @@ unlock: fc_lport_set_local_id(fip->lp, new_port_id); } +/** + * fcoe_ctlr_mode_set() - Set or reset the ctlr's mode + * @lport: The local port to be (re)configured + * @fip: The FCoE controller whose mode is changing + * @fip_mode: The new fip mode + * + * Note that the we shouldn't be changing the libfc discovery settings + * (fc_disc_config) while an lport is going through the libfc state + * machine. The mode can only be changed when a fcoe_ctlr device is + * disabled, so that should ensure that this routine is only called + * when nothing is happening. + */ +void fcoe_ctlr_mode_set(struct fc_lport *lport, struct fcoe_ctlr *fip, + enum fip_state fip_mode) +{ + void *priv; + + WARN_ON(lport->state != LPORT_ST_RESET && + lport->state != LPORT_ST_DISABLED); + + if (fip_mode == FIP_MODE_VN2VN) { + lport->rport_priv_size = sizeof(struct fcoe_rport); + lport->point_to_multipoint = 1; + lport->tt.disc_recv_req = fcoe_ctlr_disc_recv; + lport->tt.disc_start = fcoe_ctlr_disc_start; + lport->tt.disc_stop = fcoe_ctlr_disc_stop; + lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final; + priv = fip; + } else { + lport->rport_priv_size = 0; + lport->point_to_multipoint = 0; + lport->tt.disc_recv_req = NULL; + lport->tt.disc_start = NULL; + lport->tt.disc_stop = NULL; + lport->tt.disc_stop_final = NULL; + priv = lport; + } + + fc_disc_config(lport, priv); +} + /** * fcoe_libfc_config() - Sets up libfc related properties for local port * @lport: The local port to configure libfc for @@ -2826,8 +2867,6 @@ unlock: int fcoe_libfc_config(struct fc_lport *lport, struct fcoe_ctlr *fip, const struct libfc_function_template *tt, int init_fcp) { - void *priv = lport; - /* Set the function pointers set by the LLDD */ memcpy(&lport->tt, tt, sizeof(*tt)); if (init_fcp && fc_fcp_init(lport)) @@ -2835,21 +2874,9 @@ int fcoe_libfc_config(struct fc_lport *lport, struct fcoe_ctlr *fip, fc_exch_init(lport); fc_elsct_init(lport); fc_lport_init(lport); - if (fip->mode == FIP_MODE_VN2VN) - lport->rport_priv_size = sizeof(struct fcoe_rport); fc_rport_init(lport); - if (fip->mode == FIP_MODE_VN2VN) { - lport->point_to_multipoint = 1; - lport->tt.disc_recv_req = fcoe_ctlr_disc_recv; - lport->tt.disc_start = fcoe_ctlr_disc_start; - lport->tt.disc_stop = fcoe_ctlr_disc_stop; - lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final; - priv = fip; - } - fc_disc_init(lport); - fc_disc_config(lport, priv); - + fcoe_ctlr_mode_set(lport, fip, fip->mode); return 0; } EXPORT_SYMBOL_GPL(fcoe_libfc_config); @@ -2877,6 +2904,7 @@ EXPORT_SYMBOL(fcoe_fcf_get_selected); void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev) { struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev); + struct fc_lport *lport = ctlr->lp; mutex_lock(&ctlr->ctlr_mutex); switch (ctlr_dev->mode) { @@ -2890,5 +2918,7 @@ void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev) } mutex_unlock(&ctlr->ctlr_mutex); + + fcoe_ctlr_mode_set(lport, ctlr, ctlr->mode); } EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode); -- cgit v1.2.1 From bd17381372c0740c43a9addf0d80271f647f2b38 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 25 Mar 2013 11:24:10 +0100 Subject: drm/i915: duct-tape locking when eDP init fails Thanks to apple gpu mux fail we detect an eDP output, but can't read anything over dp aux. In the resulting failure path we then hit a paranoid WARN about potential locking. Since the WARN is pretty useful for normal operation just paper over it in the failure case by grabbing the demanded (but for init/teardown not really required) lock. I've checked our driver unload code and we already don't hold the kms lock when calling drm_mode_config_cleanup. So this won't lead to a new deadlock when reloading i915.ko. v2: Make it compile. Reported-by: Dave Airlie Cc: Dave Airlie Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d7d4afe01341..8fc93f90a7cd 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2559,12 +2559,15 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder) { struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); struct intel_dp *intel_dp = &intel_dig_port->dp; + struct drm_device *dev = intel_dp_to_dev(intel_dp); i2c_del_adapter(&intel_dp->adapter); drm_encoder_cleanup(encoder); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); + mutex_lock(&dev->mode_config.mutex); ironlake_panel_vdd_off_sync(intel_dp); + mutex_unlock(&dev->mode_config.mutex); } kfree(intel_dig_port); } -- cgit v1.2.1 From 2f3edfd7e27ad4206acbc2ae99c9df5f46353024 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 26 Mar 2013 16:46:07 +0800 Subject: ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill There is a sync issue with hotplug operation. It's possible that when imx_cpu_kill gets running on primary core, the imx_cpu_die execution on the core which is to be killed hasn't been finished yet. The problem will very likely be hit when running suspend without no_console_suspend setting on kernel cmdline. It uses cpu jumping argument register to sync imx_cpu_die and imx_cpu_kill. The register will be set in imx_cpu_die and imx_cpu_kill will wait for the register being cleared to actually kill the cpu. Signed-off-by: Shawn Guo Cc: --- arch/arm/mach-imx/common.h | 2 ++ arch/arm/mach-imx/hotplug.c | 12 ++++++++++++ arch/arm/mach-imx/src.c | 12 ++++++++++++ 3 files changed, 26 insertions(+) diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5a800bfcec5b..5bf4a97ab241 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *); extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); +extern u32 imx_get_cpu_arg(int cpu); +extern void imx_set_cpu_arg(int cpu, u32 arg); extern void v7_cpu_resume(void); extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 7bc5fe15dda2..361a253e2b63 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); + /* + * We use the cpu jumping argument register to sync with + * imx_cpu_kill() which is running on cpu0 and waiting for + * the register being cleared to kill the cpu. + */ + imx_set_cpu_arg(cpu, ~0); cpu_do_idle(); } int imx_cpu_kill(unsigned int cpu) { + unsigned long timeout = jiffies + msecs_to_jiffies(50); + + while (imx_get_cpu_arg(cpu) == 0) + if (time_after(jiffies, timeout)) + return 0; imx_enable_cpu(cpu, false); + imx_set_cpu_arg(cpu, 0); return 1; } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index e15f1555c59b..09a742f8c7ab 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr) src_base + SRC_GPR1 + cpu * 8); } +u32 imx_get_cpu_arg(int cpu) +{ + cpu = cpu_logical_map(cpu); + return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4); +} + +void imx_set_cpu_arg(int cpu, u32 arg) +{ + cpu = cpu_logical_map(cpu); + writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); +} + void imx_src_prepare_restart(void) { u32 val; -- cgit v1.2.1 From 39a352a5b5896403ad4ce842a9bc3845a01c02cd Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 26 Mar 2013 14:35:57 +0100 Subject: NFC: llcp: Keep the connected socket parent pointer alive And avoid decreasing the ack log twice when dequeueing connected LLCP sockets. Signed-off-by: Samuel Ortiz --- net/nfc/llcp/sock.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index e488e440186a..8f025746f337 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -270,7 +270,9 @@ struct sock *nfc_llcp_accept_dequeue(struct sock *parent, } if (sk->sk_state == LLCP_CONNECTED || !newsock) { - nfc_llcp_accept_unlink(sk); + list_del_init(&lsk->accept_queue); + sock_put(sk); + if (newsock) sock_graft(sk, newsock); -- cgit v1.2.1 From 0eaa6cca1f75e12e4f5ec62cbe887330fe3b5fe9 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Tue, 26 Mar 2013 14:41:05 +0900 Subject: ASoC: core: Fix to check return value of snd_soc_update_bits_locked() It can be 0 or 1 return value of snd_soc_update_bits_locked() when it is success. So just check return value is negative. Signed-off-by: Joonyoung Shim Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 507d251916af..ff4b45a5d796 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2963,7 +2963,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, val = val << shift; ret = snd_soc_update_bits_locked(codec, reg, val_mask, val); - if (ret != 0) + if (ret < 0) return ret; if (snd_soc_volsw_is_stereo(mc)) { -- cgit v1.2.1 From 904c680c7bf016a8619a045850937427f8d7368c Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 26 Mar 2013 11:33:16 -0600 Subject: vfio-pci: Fix possible integer overflow The VFIO_DEVICE_SET_IRQS ioctl takes a start and count parameter, both of which are unsigned. We attempt to bounds check these, but fail to account for the case where start is a very large number, allowing start + count to wrap back into the valid range. Bounds check both start and start + count. Reported-by: Dan Carpenter Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index 8189cb6a86af..7abc5c81af2c 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -346,6 +346,7 @@ static long vfio_pci_ioctl(void *device_data, if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) { size_t size; + int max = vfio_pci_get_irq_count(vdev, hdr.index); if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL) size = sizeof(uint8_t); @@ -355,7 +356,7 @@ static long vfio_pci_ioctl(void *device_data, return -EINVAL; if (hdr.argsz - minsz < hdr.count * size || - hdr.count > vfio_pci_get_irq_count(vdev, hdr.index)) + hdr.start >= max || hdr.start + hdr.count > max) return -EINVAL; data = memdup_user((void __user *)(arg + minsz), -- cgit v1.2.1 From 64a817cfbded8674f345d1117b117f942a351a69 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 26 Mar 2013 14:11:13 -0400 Subject: nfsd4: reject "negative" acl lengths MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since we only enforce an upper bound, not a lower bound, a "negative" length can get through here. The symptom seen was a warning when we attempt to a kmalloc with an excessive size. Reported-by: Toralf Förster Cc: stable@kernel.org Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4xdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 01168865dd37..a2720071f282 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -264,7 +264,7 @@ nfsd4_decode_fattr(struct nfsd4_compoundargs *argp, u32 *bmval, iattr->ia_valid |= ATTR_SIZE; } if (bmval[0] & FATTR4_WORD0_ACL) { - int nace; + u32 nace; struct nfs4_ace *ace; READ_BUF(4); len += 4; -- cgit v1.2.1 From 637f44d24f8868ee5a597a99e7874fdd150d4cba Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 25 Mar 2013 15:40:05 -0400 Subject: drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) commit f40ebd6bcbbd0d30591f42dc16be52b5086a366b Author: Patrik Jakobsson Date: Tue Mar 5 14:24:48 2013 +0100 drm/i915: Turn off hsync and vsync on ADPA when disabling crt properly disabled the hsync/vsync logic at disable time, but neglected to re-enable them at enable time. v2: In the enable hook, restore the connector's expected DPMS level instead of forcing ON. Do this by stashing a back pointer to the connector in the crt (suggested by danvet) since otherwise it's awkward to look up. Signed-off-by: Adam Jackson Cc: stable@vger.kernel.org [danvet: Added more verbose commit citation and cc: stable tag. Also, make it compile. Then self-lart and try to assign the right pointer.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 32a3693905ec..1ce45a0a2d3e 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -45,6 +45,9 @@ struct intel_crt { struct intel_encoder base; + /* DPMS state is stored in the connector, which we need in the + * encoder's enable/disable callbacks */ + struct intel_connector *connector; bool force_hotplug_required; u32 adpa_reg; }; @@ -81,29 +84,6 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder, return true; } -static void intel_disable_crt(struct intel_encoder *encoder) -{ - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; - struct intel_crt *crt = intel_encoder_to_crt(encoder); - u32 temp; - - temp = I915_READ(crt->adpa_reg); - temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; - temp &= ~ADPA_DAC_ENABLE; - I915_WRITE(crt->adpa_reg, temp); -} - -static void intel_enable_crt(struct intel_encoder *encoder) -{ - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; - struct intel_crt *crt = intel_encoder_to_crt(encoder); - u32 temp; - - temp = I915_READ(crt->adpa_reg); - temp |= ADPA_DAC_ENABLE; - I915_WRITE(crt->adpa_reg, temp); -} - /* Note: The caller is required to filter out dpms modes not supported by the * platform. */ static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode) @@ -135,6 +115,19 @@ static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode) I915_WRITE(crt->adpa_reg, temp); } +static void intel_disable_crt(struct intel_encoder *encoder) +{ + intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF); +} + +static void intel_enable_crt(struct intel_encoder *encoder) +{ + struct intel_crt *crt = intel_encoder_to_crt(encoder); + + intel_crt_set_dpms(encoder, crt->connector->base.dpms); +} + + static void intel_crt_dpms(struct drm_connector *connector, int mode) { struct drm_device *dev = connector->dev; @@ -746,6 +739,7 @@ void intel_crt_init(struct drm_device *dev) } connector = &intel_connector->base; + crt->connector = intel_connector; drm_connector_init(dev, &intel_connector->base, &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); -- cgit v1.2.1 From fffe01f7a768d07cc50ace71abe28fbf2f786a43 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 26 Mar 2013 17:25:54 -0400 Subject: PCI: Add PCI ROM helper for platform-provided ROM images MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It turns out that some UEFI systems provide apparently an apparently valid PCI ROM BAR that turns out to contain garbage, so the attempt in 547b52463 to prefer the ROM from the BAR actually breaks a different set of machines. As Linus pointed out, the graphics drivers are probably in the best position to make this judgement, so this basically reverts 547b52463 and f9a37be0f and adds a new helper function. Followup patches will add support to nouveau and radeon for probing this ROM source if they can't find a ROM from some other source. [bhelgaas: added reporter and bugzilla pointers, s/f4eb5ff05/547b52463] Reference: https://bugzilla.redhat.com/show_bug.cgi?id=927451 Reference: http://lkml.kernel.org/r/kg69ef$vdb$1@ger.gmane.org Reported-by: Mantas Mikulėnas Reported-by: Chris Murphy Signed-off-by: Matthew Garrett Signed-off-by: Bjorn Helgaas --- drivers/pci/rom.c | 67 +++++++++++++++++++++++++---------------------------- include/linux/pci.h | 1 + 2 files changed, 32 insertions(+), 36 deletions(-) diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index b41ac7756a4b..c5d0a08a8747 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -100,27 +100,6 @@ size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size) return min((size_t)(image - rom), size); } -static loff_t pci_find_rom(struct pci_dev *pdev, size_t *size) -{ - struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; - loff_t start; - - /* assign the ROM an address if it doesn't have one */ - if (res->parent == NULL && pci_assign_resource(pdev, PCI_ROM_RESOURCE)) - return 0; - start = pci_resource_start(pdev, PCI_ROM_RESOURCE); - *size = pci_resource_len(pdev, PCI_ROM_RESOURCE); - - if (*size == 0) - return 0; - - /* Enable ROM space decodes */ - if (pci_enable_rom(pdev)) - return 0; - - return start; -} - /** * pci_map_rom - map a PCI ROM to kernel space * @pdev: pointer to pci device struct @@ -135,7 +114,7 @@ static loff_t pci_find_rom(struct pci_dev *pdev, size_t *size) void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) { struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; - loff_t start = 0; + loff_t start; void __iomem *rom; /* @@ -154,21 +133,21 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) return (void __iomem *)(unsigned long) pci_resource_start(pdev, PCI_ROM_RESOURCE); } else { - start = pci_find_rom(pdev, size); - } - } + /* assign the ROM an address if it doesn't have one */ + if (res->parent == NULL && + pci_assign_resource(pdev,PCI_ROM_RESOURCE)) + return NULL; + start = pci_resource_start(pdev, PCI_ROM_RESOURCE); + *size = pci_resource_len(pdev, PCI_ROM_RESOURCE); + if (*size == 0) + return NULL; - /* - * Some devices may provide ROMs via a source other than the BAR - */ - if (!start && pdev->rom && pdev->romlen) { - *size = pdev->romlen; - return phys_to_virt(pdev->rom); + /* Enable ROM space decodes */ + if (pci_enable_rom(pdev)) + return NULL; + } } - if (!start) - return NULL; - rom = ioremap(start, *size); if (!rom) { /* restore enable if ioremap fails */ @@ -202,8 +181,7 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom) if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) return; - if (!pdev->rom || !pdev->romlen) - iounmap(rom); + iounmap(rom); /* Disable again before continuing, leave enabled if pci=rom */ if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW))) @@ -227,7 +205,24 @@ void pci_cleanup_rom(struct pci_dev *pdev) } } +/** + * pci_platform_rom - provides a pointer to any ROM image provided by the + * platform + * @pdev: pointer to pci device struct + * @size: pointer to receive size of pci window over ROM + */ +void __iomem *pci_platform_rom(struct pci_dev *pdev, size_t *size) +{ + if (pdev->rom && pdev->romlen) { + *size = pdev->romlen; + return phys_to_virt((phys_addr_t)pdev->rom); + } + + return NULL; +} + EXPORT_SYMBOL(pci_map_rom); EXPORT_SYMBOL(pci_unmap_rom); EXPORT_SYMBOL_GPL(pci_enable_rom); EXPORT_SYMBOL_GPL(pci_disable_rom); +EXPORT_SYMBOL(pci_platform_rom); diff --git a/include/linux/pci.h b/include/linux/pci.h index 2461033a7987..710067f3618c 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -916,6 +916,7 @@ void pci_disable_rom(struct pci_dev *pdev); void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size); void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom); size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size); +void __iomem __must_check *pci_platform_rom(struct pci_dev *pdev, size_t *size); /* Power management related routines */ int pci_save_state(struct pci_dev *dev); -- cgit v1.2.1 From ff931c821bab6713a52b768b0cd7ee7e90713b36 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 21 Mar 2013 16:34:52 +0530 Subject: ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [] lr : [] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [] (__kmalloc+0x1d4/0x248) from [] (__clk_init+0x2e0/0x364) [ 0.000000] [] (__clk_init+0x2e0/0x364) from [] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [] (omap4xxx_clk_init+0xbc/0x140) from [] (setup_arch+0x15c/0x284) [ 0.000000] [] (setup_arch+0x15c/0x284) from [] (start_kernel+0x7c/0x334) [ 0.000000] [] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber Reported-by: Tony Lindgren Signed-off-by: Rajendra Nayak Acked-by: Santosh Shilimkar Reviewed-by: Mike Turquette Acked-by: Paul Walmsley Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 3 +++ arch/arm/mach-omap2/io.c | 18 ++++++++++++------ arch/arm/mach-omap2/timer.c | 4 ++++ 3 files changed, 19 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 40f4a03d728f..d6ba13e1c540 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -293,5 +293,8 @@ extern void omap_reserve(void); struct omap_hwmod; extern int omap_dss_reset(struct omap_hwmod *); +/* SoC specific clock initializer */ +extern int (*omap_clk_init)(void); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2c3fdd65387b..5c445ca1e271 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -54,6 +54,12 @@ #include "prm3xxx.h" #include "prm44xx.h" +/* + * omap_clk_init: points to a function that does the SoC-specific + * clock initializations + */ +int (*omap_clk_init)(void); + /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -397,7 +403,7 @@ void __init omap2420_init_early(void) omap242x_clockdomains_init(); omap2420_hwmod_init(); omap_hwmod_init_postsetup(); - omap2420_clk_init(); + omap_clk_init = omap2420_clk_init; } void __init omap2420_init_late(void) @@ -427,7 +433,7 @@ void __init omap2430_init_early(void) omap243x_clockdomains_init(); omap2430_hwmod_init(); omap_hwmod_init_postsetup(); - omap2430_clk_init(); + omap_clk_init = omap2430_clk_init; } void __init omap2430_init_late(void) @@ -462,7 +468,7 @@ void __init omap3_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3430_init_early(void) @@ -500,7 +506,7 @@ void __init ti81xx_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3_init_late(void) @@ -568,7 +574,7 @@ void __init am33xx_init_early(void) am33xx_clockdomains_init(); am33xx_hwmod_init(); omap_hwmod_init_postsetup(); - am33xx_clk_init(); + omap_clk_init = am33xx_clk_init; } #endif @@ -593,7 +599,7 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); - omap4xxx_clk_init(); + omap_clk_init = omap4xxx_clk_init; } void __init omap4430_init_late(void) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2bdd4cf17a8f..f62b509ed08d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void) clksrc_nr, clksrc_src) \ void __init omap##name##_gptimer_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ @@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void) \ clksrc_nr, clksrc_src) \ void __init omap##name##_sync32k_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ -- cgit v1.2.1 From 2ab3a749eb14c96eaf453afe6e678c9c1dab1637 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 5 Mar 2013 09:06:58 +0100 Subject: gpio-ich: Fix value returned by ichx_gpio_request Per Documentation/gpio.txt, gpio_request callbacks should return 0 on success or a negative value on error. So it is not clear what was meant by letting ichx_gpio_request return 1 in some cases, nor how a caller would interpret it. Align the code with the comment above it and consider pins as available by default. Signed-off-by: Jean Delvare Cc: Grant Likely Acked-by: Peter Tyser Signed-off-by: Linus Walleij --- drivers/gpio/gpio-ich.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c index f9dbd503fc40..de3c317bd3e2 100644 --- a/drivers/gpio/gpio-ich.c +++ b/drivers/gpio/gpio-ich.c @@ -214,7 +214,7 @@ static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr) * If it can't be trusted, assume that the pin can be used as a GPIO. */ if (ichx_priv.desc->use_sel_ignore[nr / 32] & (1 << (nr & 0x1f))) - return 1; + return 0; return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV; } -- cgit v1.2.1 From d6b057b5dbba97e6ba13aace5270babd7c8b658c Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:35 +0000 Subject: e1000: ethtool: Add missing dma_mapping_error-call in e1000_setup_desc_rings After dma_map_single, dma_mapping_error must be called. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 43462d596a4e..ffd287196bf8 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -1053,6 +1053,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) txdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) { + ret_val = 4; + goto err_nomem; + } tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma); tx_desc->lower.data = cpu_to_le32(skb->len); tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | @@ -1069,7 +1073,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer), GFP_KERNEL); if (!rxdr->buffer_info) { - ret_val = 4; + ret_val = 5; goto err_nomem; } @@ -1077,7 +1081,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, GFP_KERNEL); if (!rxdr->desc) { - ret_val = 5; + ret_val = 6; goto err_nomem; } memset(rxdr->desc, 0, rxdr->size); @@ -1101,7 +1105,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL); if (!skb) { - ret_val = 6; + ret_val = 7; goto err_nomem; } skb_reserve(skb, NET_IP_ALIGN); @@ -1110,6 +1114,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, E1000_RXBUFFER_2048, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) { + ret_val = 8; + goto err_nomem; + } rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma); memset(skb->data, 0x00, skb->len); } -- cgit v1.2.1 From 065946c65a61943b4c609a0a1b1bac6742b3b593 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:41 +0000 Subject: ixgb: Add missing dma_mapping_error-call in ixgb_alloc_rx_buffers After dma_map_single, dma_mapping_error must be called. It seems safe to not free the skb allocated in this function, as the skb can be reused later. Additionally this patch fixes one coding-style error. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index ea4808373435..b5f94abe3cff 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -2159,6 +2159,10 @@ map_skb: skb->data, adapter->rx_buffer_len, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } rx_desc = IXGB_RX_DESC(*rx_ring, i); rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); @@ -2168,7 +2172,8 @@ map_skb: rx_desc->status = 0; - if (++i == rx_ring->count) i = 0; + if (++i == rx_ring->count) + i = 0; buffer_info = &rx_ring->buffer_info[i]; } -- cgit v1.2.1 From 9afd9b7090225d78ef56423a2ff65354dc38f1b1 Mon Sep 17 00:00:00 2001 From: Gabriel Fernandez Date: Mon, 18 Mar 2013 11:45:05 +0100 Subject: gpio: stmpe: pass DT node to irqdomain The irq domain was implemented but the device tree node was not transmitted to irq_domain_add_simple(). Cc: stable@vger.kernel.org Signed-off-by: Gabriel Fernandez Signed-off-by: Linus Walleij --- drivers/gpio/gpio-stmpe.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index 770476a9da87..3ce5bc38ac31 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -307,11 +307,15 @@ static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = { .xlate = irq_domain_xlate_twocell, }; -static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio) +static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio, + struct device_node *np) { - int base = stmpe_gpio->irq_base; + int base = 0; - stmpe_gpio->domain = irq_domain_add_simple(NULL, + if (!np) + base = stmpe_gpio->irq_base; + + stmpe_gpio->domain = irq_domain_add_simple(np, stmpe_gpio->chip.ngpio, base, &stmpe_gpio_irq_simple_ops, stmpe_gpio); if (!stmpe_gpio->domain) { @@ -346,6 +350,9 @@ static int stmpe_gpio_probe(struct platform_device *pdev) stmpe_gpio->chip = template_chip; stmpe_gpio->chip.ngpio = stmpe->num_gpios; stmpe_gpio->chip.dev = &pdev->dev; +#ifdef CONFIG_OF + stmpe_gpio->chip.of_node = np; +#endif stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1; if (pdata) @@ -366,7 +373,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev) goto out_free; if (irq >= 0) { - ret = stmpe_gpio_irq_init(stmpe_gpio); + ret = stmpe_gpio_irq_init(stmpe_gpio, np); if (ret) goto out_disable; -- cgit v1.2.1 From 37287fae7e4506fb0822523587c769783164cdd6 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:46 +0000 Subject: e1000e: Add missing dma_mapping_error-call in e1000_alloc_jumbo_rx_buffers After dma_map_page, dma_mapping_error must be called. It seems safe to not free the skb/page allocated in this function, as the skb/page can be reused later. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 948b86ffa4f0..7e615e2bf7e6 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -848,11 +848,16 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, buffer_info->page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } + } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); -- cgit v1.2.1 From f901b6bc404b67d96eca739857c097e022727b71 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 27 Mar 2013 11:36:42 +0100 Subject: can: sja1000: fix define conflict on SH Thias patch fixes a define conflict between the SH architecture and the sja1000 driver: drivers/net/can/sja1000/sja1000.h:59:0: warning: "REG_SR" redefined [enabled by default] arch/sh/include/asm/ptrace_32.h:25:0: note: this is the location of the previous definition A SJA1000_ prefix is added to the offending sja1000 define only, to make a minimal patch suited for stable. A later patch will add a SJA1000_ prefix to all defines in sja1000.h. Cc: linux-stable Reported-by: Fengguang Wu Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/plx_pci.c | 4 ++-- drivers/net/can/sja1000/sja1000.c | 6 +++--- drivers/net/can/sja1000/sja1000.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index a042cdc260dc..3c18d7d000ed 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -348,7 +348,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) */ if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) == REG_CR_BASICCAN_INITIAL && - (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) && + (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) && (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL)) flag = 1; @@ -360,7 +360,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) * See states on p. 23 of the Datasheet. */ if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL && - priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL && + priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL && priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL) return flag; diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index daf4013a8fc7..e4df307eaa90 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -92,7 +92,7 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) */ spin_lock_irqsave(&priv->cmdreg_lock, flags); priv->write_reg(priv, REG_CMR, val); - priv->read_reg(priv, REG_SR); + priv->read_reg(priv, SJA1000_REG_SR); spin_unlock_irqrestore(&priv->cmdreg_lock, flags); } @@ -502,7 +502,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) { n++; - status = priv->read_reg(priv, REG_SR); + status = priv->read_reg(priv, SJA1000_REG_SR); /* check for absent controller due to hw unplug */ if (status == 0xFF && sja1000_is_absent(priv)) return IRQ_NONE; @@ -530,7 +530,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) /* receive interrupt */ while (status & SR_RBS) { sja1000_rx(dev); - status = priv->read_reg(priv, REG_SR); + status = priv->read_reg(priv, SJA1000_REG_SR); /* check for absent controller */ if (status == 0xFF && sja1000_is_absent(priv)) return IRQ_NONE; diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h index afa99847a510..aa48e053da27 100644 --- a/drivers/net/can/sja1000/sja1000.h +++ b/drivers/net/can/sja1000/sja1000.h @@ -56,7 +56,7 @@ /* SJA1000 registers - manual section 6.4 (Pelican Mode) */ #define REG_MOD 0x00 #define REG_CMR 0x01 -#define REG_SR 0x02 +#define SJA1000_REG_SR 0x02 #define REG_IR 0x03 #define REG_IER 0x04 #define REG_ALC 0x0B -- cgit v1.2.1 From f951b6587b94df2abb8c7a2425f7dcdb4fe647dc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Mar 2013 13:08:44 +0000 Subject: regmap: async: Add missing return Let's only write once... Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 3d2367501fd0..dd82acfbcf4e 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1036,6 +1036,8 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg, kfree(async->work_buf); kfree(async); } + + return ret; } trace_regmap_hw_write_start(map->dev, reg, -- cgit v1.2.1 From 9beb09f1cadf33145c307c504f844ae24686c872 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 4 Mar 2013 20:44:39 -0800 Subject: fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings The lcdc B side horizon output is shifted if sh_mobile_lcdc_pan() was called. This patch fixup this issue. It is tested on R8A7740 Armadillo800eva HDMI output. Special thanks to Fukushima-san, and Sano-san Reported-by: Osamu Fukushima Signed-off-by: Hideyuki Sano Signed-off-by: Kuninori Morimoto Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/video/sh_mobile_lcdcfb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 63203acef812..0264704a52be 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -858,6 +858,7 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch) tmp = ((mode->xres & 7) << 24) | ((display_h_total & 7) << 16) | ((mode->hsync_len & 7) << 8) | (hsync_pos & 7); lcdc_write_chan(ch, LDHAJR, tmp); + lcdc_write_chan_mirror(ch, LDHAJR, tmp); } static void sh_mobile_lcdc_overlay_setup(struct sh_mobile_lcdc_overlay *ovl) -- cgit v1.2.1 From 3fd33497f80aa528ded0db2851b48638635d5caa Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 27 Mar 2013 12:47:13 +0100 Subject: can: sja1000: limit PEAK PCAN-PC Card to HAS_IOPORT This patch limits the PEAK PCAN-PC Card driver to systems with ioports. Fixes a compile time breakage on SH: drivers/net/can/sja1000/peak_pcmcia.c:626:2: error: implicit declaration of function 'ioport_unmap' Reported-by: Fengguang Wu Cc: Paul Mundt Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index b39ca5b3ea7f..ff2ba86cd4a4 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -46,6 +46,7 @@ config CAN_EMS_PCI config CAN_PEAK_PCMCIA tristate "PEAK PCAN-PC Card" depends on PCMCIA + depends on HAS_IOPORT ---help--- This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) from PEAK-System (http://www.peak-system.com). To compile this -- cgit v1.2.1 From 27b7c63a7c509d797c151e95a641e1d94d94bbd9 Mon Sep 17 00:00:00 2001 From: Lauri Kasanen Date: Wed, 27 Mar 2013 15:04:55 +0200 Subject: drm/i915: Fix build failure ERROR: "__build_bug_on_failed" [drivers/gpu/drm/i915/i915.ko] undefined! Originally reported at http://www.gossamer-threads.com/lists/linux/kernel/1631803 FDO bug #62775 This needs to be backported to both 3.7 and 3.8 stable trees. Doesn't apply straight, but it's a quick change. Signed-off-by: Lauri Kasanen Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62775 Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 3b11ab0fbc96..9a48e1a2d417 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -57,7 +57,7 @@ eb_create(struct drm_i915_gem_execbuffer2 *args) if (eb == NULL) { int size = args->buffer_count; int count = PAGE_SIZE / sizeof(struct hlist_head) / 2; - BUILD_BUG_ON(!is_power_of_2(PAGE_SIZE / sizeof(struct hlist_head))); + BUILD_BUG_ON_NOT_POWER_OF_2(PAGE_SIZE / sizeof(struct hlist_head)); while (count > 2*size) count >>= 1; eb = kzalloc(count*sizeof(struct hlist_head) + -- cgit v1.2.1 From 54683441a92ebe20c5282465ea6f21e5e74d2974 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 Mar 2013 10:52:11 -0400 Subject: Revert "brcmsmac: support 4313iPA" This reverts commit b6fc28a158076ca2764edc9a6d1e1402f56e1c0c. This commit is reported to cause a regression in the support for some revisions of 4313 ePA devices. http://marc.info/?l=linux-wireless&m=136360340200943&w=2 Conflicts: drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c Reported-by: David Herrmann Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c | 369 ++++++++------------- .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c | 64 ++-- 2 files changed, 162 insertions(+), 271 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 21a824232478..18d37645e2cd 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -1137,9 +1137,8 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi, gain0_15 = ((biq1 & 0xf) << 12) | ((tia & 0xf) << 8) | ((lna2 & 0x3) << 6) | - ((lna2 & 0x3) << 4) | - ((lna1 & 0x3) << 2) | - ((lna1 & 0x3) << 0); + ((lna2 & + 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0); mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0); mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0); @@ -1157,8 +1156,6 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi, } mod_phy_reg(pi, 0x44d, (0x1 << 0), (!trsw) << 0); - mod_phy_reg(pi, 0x4b1, (0x3 << 11), lna1 << 11); - mod_phy_reg(pi, 0x4e6, (0x3 << 3), lna1 << 3); } @@ -1331,43 +1328,6 @@ static u32 wlc_lcnphy_measure_digital_power(struct brcms_phy *pi, u16 nsamples) return (iq_est.i_pwr + iq_est.q_pwr) / nsamples; } -static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain, - u16 tia_gain, u16 lna2_gain) -{ - u32 i_thresh_l, q_thresh_l; - u32 i_thresh_h, q_thresh_h; - struct lcnphy_iq_est iq_est_h, iq_est_l; - - wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain, - lna2_gain, 0); - - wlc_lcnphy_rx_gain_override_enable(pi, true); - wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0); - udelay(500); - write_radio_reg(pi, RADIO_2064_REG112, 0); - if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l)) - return false; - - wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0); - udelay(500); - write_radio_reg(pi, RADIO_2064_REG112, 0); - if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h)) - return false; - - i_thresh_l = (iq_est_l.i_pwr << 1); - i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr; - - q_thresh_l = (iq_est_l.q_pwr << 1); - q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr; - if ((iq_est_h.i_pwr > i_thresh_l) && - (iq_est_h.i_pwr < i_thresh_h) && - (iq_est_h.q_pwr > q_thresh_l) && - (iq_est_h.q_pwr < q_thresh_h)) - return true; - - return false; -} - static bool wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, const struct lcnphy_rx_iqcomp *iqcomp, @@ -1382,8 +1342,8 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old, rfoverride3_old, rfoverride3val_old, rfoverride4_old, rfoverride4val_old, afectrlovr_old, afectrlovrval_old; - int tia_gain, lna2_gain, biq1_gain; - bool set_gain; + int tia_gain; + u32 received_power, rx_pwr_threshold; u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl; u16 values_to_save[11]; s16 *ptr; @@ -1408,134 +1368,126 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, goto cal_done; } - WARN_ON(module != 1); - tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); - wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); - - for (i = 0; i < 11; i++) - values_to_save[i] = - read_radio_reg(pi, rxiq_cal_rf_reg[i]); - Core1TxControl_old = read_phy_reg(pi, 0x631); - - or_phy_reg(pi, 0x631, 0x0015); - - RFOverride0_old = read_phy_reg(pi, 0x44c); - RFOverrideVal0_old = read_phy_reg(pi, 0x44d); - rfoverride2_old = read_phy_reg(pi, 0x4b0); - rfoverride2val_old = read_phy_reg(pi, 0x4b1); - rfoverride3_old = read_phy_reg(pi, 0x4f9); - rfoverride3val_old = read_phy_reg(pi, 0x4fa); - rfoverride4_old = read_phy_reg(pi, 0x938); - rfoverride4val_old = read_phy_reg(pi, 0x939); - afectrlovr_old = read_phy_reg(pi, 0x43b); - afectrlovrval_old = read_phy_reg(pi, 0x43c); - old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); - old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); - - tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); - if (tx_gain_override_old) { - wlc_lcnphy_get_tx_gain(pi, &old_gains); - tx_gain_index_old = pi_lcn->lcnphy_current_index; - } - - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); + if (module == 1) { - mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); + tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); + wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); - mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); + for (i = 0; i < 11; i++) + values_to_save[i] = + read_radio_reg(pi, rxiq_cal_rf_reg[i]); + Core1TxControl_old = read_phy_reg(pi, 0x631); + + or_phy_reg(pi, 0x631, 0x0015); + + RFOverride0_old = read_phy_reg(pi, 0x44c); + RFOverrideVal0_old = read_phy_reg(pi, 0x44d); + rfoverride2_old = read_phy_reg(pi, 0x4b0); + rfoverride2val_old = read_phy_reg(pi, 0x4b1); + rfoverride3_old = read_phy_reg(pi, 0x4f9); + rfoverride3val_old = read_phy_reg(pi, 0x4fa); + rfoverride4_old = read_phy_reg(pi, 0x938); + rfoverride4val_old = read_phy_reg(pi, 0x939); + afectrlovr_old = read_phy_reg(pi, 0x43b); + afectrlovrval_old = read_phy_reg(pi, 0x43c); + old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); + old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); + + tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); + if (tx_gain_override_old) { + wlc_lcnphy_get_tx_gain(pi, &old_gains); + tx_gain_index_old = pi_lcn->lcnphy_current_index; + } - write_radio_reg(pi, RADIO_2064_REG116, 0x06); - write_radio_reg(pi, RADIO_2064_REG12C, 0x07); - write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); - write_radio_reg(pi, RADIO_2064_REG098, 0x03); - write_radio_reg(pi, RADIO_2064_REG00B, 0x7); - mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); - write_radio_reg(pi, RADIO_2064_REG01D, 0x01); - write_radio_reg(pi, RADIO_2064_REG114, 0x01); - write_radio_reg(pi, RADIO_2064_REG02E, 0x10); - write_radio_reg(pi, RADIO_2064_REG12A, 0x08); - - mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); - mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); - mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); - mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); - write_phy_reg(pi, 0x6da, 0xffff); - or_phy_reg(pi, 0x6db, 0x3); + mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); - wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); - set_gain = false; - - lna2_gain = 3; - while ((lna2_gain >= 0) && !set_gain) { - tia_gain = 4; - - while ((tia_gain >= 0) && !set_gain) { - biq1_gain = 6; - - while ((biq1_gain >= 0) && !set_gain) { - set_gain = wlc_lcnphy_rx_iq_cal_gain(pi, - (u16) - biq1_gain, - (u16) - tia_gain, - (u16) - lna2_gain); - biq1_gain -= 1; - } + write_radio_reg(pi, RADIO_2064_REG116, 0x06); + write_radio_reg(pi, RADIO_2064_REG12C, 0x07); + write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); + write_radio_reg(pi, RADIO_2064_REG098, 0x03); + write_radio_reg(pi, RADIO_2064_REG00B, 0x7); + mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); + write_radio_reg(pi, RADIO_2064_REG01D, 0x01); + write_radio_reg(pi, RADIO_2064_REG114, 0x01); + write_radio_reg(pi, RADIO_2064_REG02E, 0x10); + write_radio_reg(pi, RADIO_2064_REG12A, 0x08); + + mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); + mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); + + mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); + + wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0); + write_phy_reg(pi, 0x6da, 0xffff); + or_phy_reg(pi, 0x6db, 0x3); + wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); + wlc_lcnphy_rx_gain_override_enable(pi, true); + + tia_gain = 8; + rx_pwr_threshold = 950; + while (tia_gain > 0) { tia_gain -= 1; + wlc_lcnphy_set_rx_gain_by_distribution(pi, + 0, 0, 2, 2, + (u16) + tia_gain, 1, 0); + udelay(500); + + received_power = + wlc_lcnphy_measure_digital_power(pi, 2000); + if (received_power < rx_pwr_threshold) + break; } - lna2_gain -= 1; - } + result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff); - if (set_gain) - result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024); - else - result = false; + wlc_lcnphy_stop_tx_tone(pi); - wlc_lcnphy_stop_tx_tone(pi); + write_phy_reg(pi, 0x631, Core1TxControl_old); - write_phy_reg(pi, 0x631, Core1TxControl_old); - - write_phy_reg(pi, 0x44c, RFOverrideVal0_old); - write_phy_reg(pi, 0x44d, RFOverrideVal0_old); - write_phy_reg(pi, 0x4b0, rfoverride2_old); - write_phy_reg(pi, 0x4b1, rfoverride2val_old); - write_phy_reg(pi, 0x4f9, rfoverride3_old); - write_phy_reg(pi, 0x4fa, rfoverride3val_old); - write_phy_reg(pi, 0x938, rfoverride4_old); - write_phy_reg(pi, 0x939, rfoverride4val_old); - write_phy_reg(pi, 0x43b, afectrlovr_old); - write_phy_reg(pi, 0x43c, afectrlovrval_old); - write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); - write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); + write_phy_reg(pi, 0x44c, RFOverrideVal0_old); + write_phy_reg(pi, 0x44d, RFOverrideVal0_old); + write_phy_reg(pi, 0x4b0, rfoverride2_old); + write_phy_reg(pi, 0x4b1, rfoverride2val_old); + write_phy_reg(pi, 0x4f9, rfoverride3_old); + write_phy_reg(pi, 0x4fa, rfoverride3val_old); + write_phy_reg(pi, 0x938, rfoverride4_old); + write_phy_reg(pi, 0x939, rfoverride4val_old); + write_phy_reg(pi, 0x43b, afectrlovr_old); + write_phy_reg(pi, 0x43c, afectrlovrval_old); + write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); + write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); - wlc_lcnphy_clear_trsw_override(pi); + wlc_lcnphy_clear_trsw_override(pi); - mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); + mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); - for (i = 0; i < 11; i++) - write_radio_reg(pi, rxiq_cal_rf_reg[i], - values_to_save[i]); + for (i = 0; i < 11; i++) + write_radio_reg(pi, rxiq_cal_rf_reg[i], + values_to_save[i]); - if (tx_gain_override_old) - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); - else - wlc_lcnphy_disable_tx_gain_override(pi); + if (tx_gain_override_old) + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); + else + wlc_lcnphy_disable_tx_gain_override(pi); - wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); - wlc_lcnphy_rx_gain_override_enable(pi, false); + wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); + wlc_lcnphy_rx_gain_override_enable(pi, false); + } cal_done: kfree(ptr); @@ -1829,17 +1781,6 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel) write_radio_reg(pi, RADIO_2064_REG038, 3); write_radio_reg(pi, RADIO_2064_REG091, 7); } - - if (!(pi->sh->boardflags & BFL_FEM)) { - u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc, - 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0}; - - write_radio_reg(pi, RADIO_2064_REG02A, 0xf); - write_radio_reg(pi, RADIO_2064_REG091, 0x3); - write_radio_reg(pi, RADIO_2064_REG038, 0x3); - - write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]); - } } static int @@ -2034,16 +1975,6 @@ wlc_lcnphy_set_tssi_mux(struct brcms_phy *pi, enum lcnphy_tssi_mode pos) } else { mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); - mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2); - mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4); - mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); - mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77); - mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1); - mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7); - mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1); - mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4); } } else { mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2); @@ -2130,14 +2061,12 @@ static void wlc_lcnphy_pwrctrl_rssiparams(struct brcms_phy *pi) (auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12)); mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5)); - mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0)); } static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) { struct phytbl_info tab; u32 rfseq, ind; - u8 tssi_sel; tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; @@ -2159,13 +2088,7 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4); - if (pi->sh->boardflags & BFL_FEM) { - tssi_sel = 0x1; - wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT); - } else { - tssi_sel = 0xe; - wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_POST_PA); - } + wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT); mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14); mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15); @@ -2201,10 +2124,9 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0); if (LCNREV_IS(pi->pubpi.phy_rev, 2)) { - mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel); + mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe); mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4); } else { - mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1); mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3); } @@ -2251,10 +2173,6 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8); - mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0); - mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); - wlc_lcnphy_pwrctrl_rssiparams(pi); } @@ -2873,8 +2791,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) read_radio_reg(pi, RADIO_2064_REG007) & 1; u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10; u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4; - u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi); - idleTssi = read_phy_reg(pi, 0x4ab); suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) & MCTL_EN_MAC)); @@ -2892,12 +2808,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4); mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2); wlc_lcnphy_tssi_setup(pi); - - mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0)); - mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6)); - - wlc_lcnphy_set_bbmult(pi, 0x0); - wlc_phy_do_dummy_tx(pi, true, OFF); idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0)) >> 0); @@ -2919,7 +2829,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12); - wlc_lcnphy_set_bbmult(pi, SAVE_bbmult); wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old); wlc_lcnphy_set_tx_gain(pi, &old_gains); wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl); @@ -3133,11 +3042,6 @@ static void wlc_lcnphy_tx_pwr_ctrl_init(struct brcms_phy_pub *ppi) wlc_lcnphy_write_table(pi, &tab); tab.tbl_offset++; } - mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0); - mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0); - mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8); - mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4); - mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2); mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7); @@ -3939,6 +3843,7 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) target_gains.pad_gain = 21; target_gains.dac_gain = 0; wlc_lcnphy_set_tx_gain(pi, &target_gains); + wlc_lcnphy_set_tx_pwr_by_index(pi, 16); if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) { @@ -3949,7 +3854,6 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) lcnphy_recal ? LCNPHY_CAL_RECAL : LCNPHY_CAL_FULL), false); } else { - wlc_lcnphy_set_tx_pwr_by_index(pi, 16); wlc_lcnphy_tx_iqlo_soft_cal_full(pi); } @@ -4374,22 +4278,17 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi, if (CHSPEC_IS5G(pi->radio_chanspec)) pa_gain = 0x70; else - pa_gain = 0x60; + pa_gain = 0x70; if (pi->sh->boardflags & BFL_FEM) pa_gain = 0x10; - tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; tab.tbl_len = 1; tab.tbl_ptr = &val; for (j = 0; j < 128; j++) { - if (pi->sh->boardflags & BFL_FEM) - gm_gain = gain_table[j].gm; - else - gm_gain = 15; - + gm_gain = gain_table[j].gm; val = (((u32) pa_gain << 24) | (gain_table[j].pad << 16) | (gain_table[j].pga << 8) | gm_gain); @@ -4600,10 +4499,7 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) write_phy_reg(pi, 0x4ea, 0x4688); - if (pi->sh->boardflags & BFL_FEM) - mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); - else - mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0); + mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6); @@ -4614,13 +4510,6 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) wlc_lcnphy_rcal(pi); wlc_lcnphy_rc_cal(pi); - - if (!(pi->sh->boardflags & BFL_FEM)) { - write_radio_reg(pi, RADIO_2064_REG032, 0x6f); - write_radio_reg(pi, RADIO_2064_REG033, 0x19); - write_radio_reg(pi, RADIO_2064_REG039, 0xe); - } - } static void wlc_lcnphy_radio_init(struct brcms_phy *pi) @@ -4650,20 +4539,22 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi) wlc_lcnphy_write_table(pi, &tab); } - if (!(pi->sh->boardflags & BFL_FEM)) { - tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; - tab.tbl_width = 16; - tab.tbl_ptr = &val; - tab.tbl_len = 1; + tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; + tab.tbl_width = 16; + tab.tbl_ptr = &val; + tab.tbl_len = 1; - val = 150; - tab.tbl_offset = 0; - wlc_lcnphy_write_table(pi, &tab); + val = 114; + tab.tbl_offset = 0; + wlc_lcnphy_write_table(pi, &tab); - val = 220; - tab.tbl_offset = 1; - wlc_lcnphy_write_table(pi, &tab); - } + val = 130; + tab.tbl_offset = 1; + wlc_lcnphy_write_table(pi, &tab); + + val = 6; + tab.tbl_offset = 8; + wlc_lcnphy_write_table(pi, &tab); if (CHSPEC_IS2G(pi->radio_chanspec)) { if (pi->sh->boardflags & BFL_FEM) @@ -5055,7 +4946,6 @@ void wlc_phy_chanspec_set_lcnphy(struct brcms_phy *pi, u16 chanspec) wlc_lcnphy_load_tx_iir_filter(pi, true, 3); mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3); - wlc_lcnphy_tssi_setup(pi); } void wlc_phy_detach_lcnphy(struct brcms_phy *pi) @@ -5094,7 +4984,8 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi) if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) return false; - if (LCNREV_IS(pi->pubpi.phy_rev, 1)) { + if ((pi->sh->boardflags & BFL_FEM) && + (LCNREV_IS(pi->pubpi.phy_rev, 1))) { if (pi_lcn->lcnphy_tempsense_option == 3) { pi->hwpwrctrl = true; pi->hwpwrctrl_capable = true; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c index b7e95acc2084..622c01ca72c5 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c @@ -1992,70 +1992,70 @@ static const u16 dot11lcn_sw_ctrl_tbl_4313_epa_rev0[] = { }; static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = { - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, }; static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = { -- cgit v1.2.1 From e67dd874e60529dbd2e8232babb1e23479ba2ffa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 19 Mar 2013 07:52:48 +0100 Subject: b43: N-PHY: increase initial value of "mind" in RSSI calibration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're using "mind" variable to find the VCM that got the best polling results. For each VCM we calculte "currd" which is compared to the "mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a value smaller than 40 makes no sense, so increase the initial value. This fixes a regression introduced in 3.4 by commit: e0c9a0219a8f542e3946fe972a68aacf8c3f906c (my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s) Signed-off-by: Rafał Miłecki Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_n.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 3c35382ee6c2..e014a7a8154d 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -1615,7 +1615,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev) } for (i = 0; i < 4; i += 2) { s32 curr; - s32 mind = 40; + s32 mind = 0x100000; s32 minpoll = 249; u8 minvcm = 0; if (2 * core != i) @@ -1799,7 +1799,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type) } for (i = 0; i < 4; i++) { - s32 mind = 40; + s32 mind = 0x100000; u8 minvcm = 0; s32 minpoll = 249; s32 curr; -- cgit v1.2.1 From b251412db99ccd4495ce372fec7daee27bf06923 Mon Sep 17 00:00:00 2001 From: "Iestyn C. Elfick" Date: Wed, 20 Mar 2013 14:02:31 -0500 Subject: b43: A fix for DMA transmission sequence errors Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected. This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair. Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs. Tested-by: Chris Vine Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 65 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 53 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 38bc5a7997ff..122146943bf2 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1487,8 +1487,12 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, const struct b43_dma_ops *ops; struct b43_dmaring *ring; struct b43_dmadesc_meta *meta; + static const struct b43_txstatus fake; /* filled with 0 */ + const struct b43_txstatus *txstat; int slot, firstused; bool frame_succeed; + int skip; + static u8 err_out1, err_out2; ring = parse_cookie(dev, status->cookie, &slot); if (unlikely(!ring)) @@ -1501,13 +1505,36 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, firstused = ring->current_slot - ring->used_slots + 1; if (firstused < 0) firstused = ring->nr_slots + firstused; + + skip = 0; if (unlikely(slot != firstused)) { /* This possibly is a firmware bug and will result in - * malfunction, memory leaks and/or stall of DMA functionality. */ - b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. " - "Expected %d, but got %d\n", - ring->index, firstused, slot); - return; + * malfunction, memory leaks and/or stall of DMA functionality. + */ + if (slot == next_slot(ring, next_slot(ring, firstused))) { + /* If a single header/data pair was missed, skip over + * the first two slots in an attempt to recover. + */ + slot = firstused; + skip = 2; + if (!err_out1) { + /* Report the error once. */ + b43dbg(dev->wl, + "Skip on DMA ring %d slot %d.\n", + ring->index, slot); + err_out1 = 1; + } + } else { + /* More than a single header/data pair were missed. + * Report this error once. + */ + if (!err_out2) + b43dbg(dev->wl, + "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n", + ring->index, firstused, slot); + err_out2 = 1; + return; + } } ops = ring->ops; @@ -1522,11 +1549,13 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, slot, firstused, ring->index); break; } + if (meta->skb) { struct b43_private_tx_info *priv_info = - b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); + b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); - unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1); + unmap_descbuffer(ring, meta->dmaaddr, + meta->skb->len, 1); kfree(priv_info->bouncebuffer); priv_info->bouncebuffer = NULL; } else { @@ -1538,8 +1567,9 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, struct ieee80211_tx_info *info; if (unlikely(!meta->skb)) { - /* This is a scatter-gather fragment of a frame, so - * the skb pointer must not be NULL. */ + /* This is a scatter-gather fragment of a frame, + * so the skb pointer must not be NULL. + */ b43dbg(dev->wl, "TX status unexpected NULL skb " "at slot %d (first=%d) on ring %d\n", slot, firstused, ring->index); @@ -1550,9 +1580,18 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, /* * Call back to inform the ieee80211 subsystem about - * the status of the transmission. + * the status of the transmission. When skipping over + * a missed TX status report, use a status structure + * filled with zeros to indicate that the frame was not + * sent (frame_count 0) and not acknowledged */ - frame_succeed = b43_fill_txstatus_report(dev, info, status); + if (unlikely(skip)) + txstat = &fake; + else + txstat = status; + + frame_succeed = b43_fill_txstatus_report(dev, info, + txstat); #ifdef CONFIG_B43_DEBUG if (frame_succeed) ring->nr_succeed_tx_packets++; @@ -1580,12 +1619,14 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, /* Everything unmapped and free'd. So it's not used anymore. */ ring->used_slots--; - if (meta->is_last_fragment) { + if (meta->is_last_fragment && !skip) { /* This is the last scatter-gather * fragment of the frame. We are done. */ break; } slot = next_slot(ring, slot); + if (skip > 0) + --skip; } if (ring->stopped) { B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME); -- cgit v1.2.1 From 7fc0357479eeff4ca808c4d8c09bc7631f576b8d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 25 Mar 2013 11:27:46 -0700 Subject: ath9k: avoid queueing hw check work when suspended The following issue was reported. WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x32/0x40 [mac80211]() Hardware name: iMac12,1 queueing ieee80211 work while going to suspend Pid: 0, comm: swapper/0 Tainted: PF O 3.8.2-206.fc18.x86_64 #1 Call Trace: Mar 16 09:39:17 Parags-iMac kernel: [ 3993.642992] [] warn_slowpath_common+0x7f/0xc0 [] ? ath_start_rx_poll+0x70/0x70 [ath9k] ] warn_slowpath_fmt+0x46/0x50 [] ieee80211_can_queue_work.isra.7+0x32/0x40 Fix this by avoiding to queue the work if our device has already been marked as suspended or stopped. Reported-by: Parag Warudkar Tested-by: Parag Warudkar Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/link.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index 39c84ecf6a42..7fdac6c7b3ea 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -170,7 +170,8 @@ void ath_rx_poll(unsigned long data) { struct ath_softc *sc = (struct ath_softc *)data; - ieee80211_queue_work(sc->hw, &sc->hw_check_work); + if (!test_bit(SC_OP_INVALID, &sc->sc_flags)) + ieee80211_queue_work(sc->hw, &sc->hw_check_work); } /* -- cgit v1.2.1 From ace5af39866da7d45f43774150dace19a73716d6 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 26 Mar 2013 17:35:23 +0000 Subject: iwlegacy: 4965-rs: avoid null pointer dereference error il4965_rs_initialize_lq checks to see if sta is null, however, before that check il4965_rs_use_green dereferences sta when intializing use_green. Avoid a potential null pointer dereference error by only calling il4965_rs_use_green after we are sure sta is not null. Smatch analysis: drivers/net/wireless/iwlegacy/4965-rs.c:2160 il4965_rs_initialize_lq() warn: variable dereferenced before check 'sta' (see line 2155) Signed-off-by: Colin Ian King Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/4965-rs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index e8324b5e5bfe..6c7493c2d698 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -2152,7 +2152,7 @@ il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf, int rate_idx; int i; u32 rate; - u8 use_green = il4965_rs_use_green(il, sta); + u8 use_green; u8 active_tbl = 0; u8 valid_tx_ant; struct il_station_priv *sta_priv; @@ -2160,6 +2160,7 @@ il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf, if (!sta || !lq_sta) return; + use_green = il4965_rs_use_green(il, sta); sta_priv = (void *)sta->drv_priv; i = lq_sta->last_txrate_idx; -- cgit v1.2.1 From 8ac3e99e693cb876776646c07f0a954a17ee3017 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 26 Mar 2013 14:40:51 -0500 Subject: libertas: drop maintainership Would be better maintained by somebody who actualy has time for it. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 95616582c728..92efc747e726 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5043,9 +5043,8 @@ S: Maintained F: drivers/net/ethernet/marvell/sk* MARVELL LIBERTAS WIRELESS DRIVER -M: Dan Williams L: libertas-dev@lists.infradead.org -S: Maintained +S: Orphan F: drivers/net/wireless/libertas/ MARVELL MV643XX ETHERNET DRIVER -- cgit v1.2.1 From 2e1253d640eb7f8707d2591c93097c1e9f9c71d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 27 Mar 2013 08:37:08 +0100 Subject: b43: N-PHY: use more bits for offset in RSSI calibration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When calculating "offset" for final RSSI calibration we're using numbers bigger than s8 can hold. We have for example: offset[j] = 232 - poll_results[j]; formula. If poll_results[j] is small enough (it usually is) we treat number's bit as a sign bit. For example 232 - 1 becomes: 0xE8 - 0x1 = 0xE7, which is not 231 but -25. This code was introduced in e0c9a0219a8f542e3946fe972a68aacf8c3f906c and caused stability regression on some cards, for ex. BCM4322. Signed-off-by: Rafał Miłecki Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_n.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index e014a7a8154d..e8486c1e091a 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -1564,7 +1564,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev) u16 clip_off[2] = { 0xFFFF, 0xFFFF }; u8 vcm_final = 0; - s8 offset[4]; + s32 offset[4]; s32 results[8][4] = { }; s32 results_min[4] = { }; s32 poll_results[4] = { }; @@ -1732,7 +1732,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type) u8 regs_save_radio[2]; u16 regs_save_phy[2]; - s8 offset[4]; + s32 offset[4]; u8 core; u8 rail; -- cgit v1.2.1 From 5389090b59f7f72a30e25f5fd1fc560340543970 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 27 Mar 2013 03:57:10 +0000 Subject: netfilter: nf_conntrack: fix error return code Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in function nf_conntrack_standalone_init(). Signed-off-by: Wei Yongjun Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_standalone.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 6bcce401fd1c..fedee3943661 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -568,6 +568,7 @@ static int __init nf_conntrack_standalone_init(void) register_net_sysctl(&init_net, "net", nf_ct_netfilter_table); if (!nf_ct_netfilter_header) { pr_err("nf_conntrack: can't register to sysctl.\n"); + ret = -ENOMEM; goto out_sysctl; } #endif -- cgit v1.2.1 From 14109a59caf93e6eae726a34bf2f0897508ec8c1 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Tue, 26 Mar 2013 16:12:03 +0000 Subject: enet: fec: fix fail resume from suspend state Without this patch 1. boot with nfs (no_console_suspend) 2. echo mem >/sys/power/state 3. wakeup by wakesource 4. print "eth0: tx queue full" This fix above problem by reinit bd queue at restart function Signed-off-by: Frank Li Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 82 ++++++++++++++++++++++-------------- 1 file changed, 50 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 911d0253dbb2..f292c3aa423f 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -345,6 +345,53 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +/* Init RX & TX buffer descriptors + */ +static void fec_enet_bd_init(struct net_device *dev) +{ + struct fec_enet_private *fep = netdev_priv(dev); + struct bufdesc *bdp; + unsigned int i; + + /* Initialize the receive buffer descriptors. */ + bdp = fep->rx_bd_base; + for (i = 0; i < RX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. */ + if (bdp->cbd_bufaddr) + bdp->cbd_sc = BD_ENET_RX_EMPTY; + else + bdp->cbd_sc = 0; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); + } + + /* Set the last buffer to wrap */ + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); + bdp->cbd_sc |= BD_SC_WRAP; + + fep->cur_rx = fep->rx_bd_base; + + /* ...and the same for transmit */ + bdp = fep->tx_bd_base; + fep->cur_tx = bdp; + for (i = 0; i < TX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. */ + bdp->cbd_sc = 0; + if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) { + dev_kfree_skb_any(fep->tx_skbuff[i]); + fep->tx_skbuff[i] = NULL; + } + bdp->cbd_bufaddr = 0; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); + } + + /* Set the last buffer to wrap */ + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); + bdp->cbd_sc |= BD_SC_WRAP; + fep->dirty_tx = bdp; +} + /* This function is called to start or restart the FEC during a link * change. This only happens when switching between half and full * duplex. @@ -388,6 +435,8 @@ fec_restart(struct net_device *ndev, int duplex) /* Set maximum receive buffer size. */ writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); + fec_enet_bd_init(ndev); + /* Set receive and transmit descriptor base. */ writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); if (fep->bufdesc_ex) @@ -397,7 +446,6 @@ fec_restart(struct net_device *ndev, int duplex) writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); - fep->cur_rx = fep->rx_bd_base; for (i = 0; i <= TX_RING_MOD_MASK; i++) { if (fep->tx_skbuff[i]) { @@ -1597,8 +1645,6 @@ static int fec_enet_init(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); struct bufdesc *cbd_base; - struct bufdesc *bdp; - unsigned int i; /* Allocate memory for buffer descriptors. */ cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, @@ -1608,6 +1654,7 @@ static int fec_enet_init(struct net_device *ndev) return -ENOMEM; } + memset(cbd_base, 0, PAGE_SIZE); spin_lock_init(&fep->hw_lock); fep->netdev = ndev; @@ -1631,35 +1678,6 @@ static int fec_enet_init(struct net_device *ndev) writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK); netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT); - /* Initialize the receive buffer descriptors. */ - bdp = fep->rx_bd_base; - for (i = 0; i < RX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. */ - bdp->cbd_sc = 0; - bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); - } - - /* Set the last buffer to wrap */ - bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); - bdp->cbd_sc |= BD_SC_WRAP; - - /* ...and the same for transmit */ - bdp = fep->tx_bd_base; - fep->cur_tx = bdp; - for (i = 0; i < TX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. */ - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); - } - - /* Set the last buffer to wrap */ - bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); - bdp->cbd_sc |= BD_SC_WRAP; - fep->dirty_tx = bdp; - fec_restart(ndev, 0); return 0; -- cgit v1.2.1 From fcca143d696092110ae1e361866576804fe887f3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 27 Mar 2013 03:22:45 +0000 Subject: rtnetlink: fix error return code in rtnl_link_fill() Fix to return a negative error code from the error handling case instead of 0(possible overwrite to 0 by ops->fill_xstats call), as returned elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 5fb8d7e47294..b65441da74ab 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -496,8 +496,10 @@ static int rtnl_link_fill(struct sk_buff *skb, const struct net_device *dev) } if (ops->fill_info) { data = nla_nest_start(skb, IFLA_INFO_DATA); - if (data == NULL) + if (data == NULL) { + err = -EMSGSIZE; goto err_cancel_link; + } err = ops->fill_info(skb, dev); if (err < 0) goto err_cancel_data; -- cgit v1.2.1 From b56d6b3fca6d1214dbc9c5655f26e5d4ec04afc8 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 27 Mar 2013 04:41:59 +0000 Subject: drivers: net: ethernet: cpsw: use netif_wake_queue() while restarting tx queue To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index df32a090d08e..80cad06e5eb2 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -436,7 +436,7 @@ void cpsw_tx_handler(void *token, int len, int status) * queue is stopped then start the queue as we have free desc for tx */ if (unlikely(netif_queue_stopped(ndev))) - netif_start_queue(ndev); + netif_wake_queue(ndev); cpts_tx_timestamp(priv->cpts, skb); priv->stats.tx_packets++; priv->stats.tx_bytes += len; -- cgit v1.2.1 From 7e51cde276ca820d526c6c21cf8147df595a36bf Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 27 Mar 2013 04:42:00 +0000 Subject: drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index ae1b77aa199f..72300bc9e378 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1053,7 +1053,7 @@ static void emac_tx_handler(void *token, int len, int status) * queue is stopped then start the queue as we have free desc for tx */ if (unlikely(netif_queue_stopped(ndev))) - netif_start_queue(ndev); + netif_wake_queue(ndev); ndev->stats.tx_packets++; ndev->stats.tx_bytes += len; dev_kfree_skb_any(skb); -- cgit v1.2.1 From ea872d7712528ad991bdabb63515bc00ee10993e Mon Sep 17 00:00:00 2001 From: Sergey Popovich Date: Wed, 27 Mar 2013 05:41:59 +0000 Subject: sch: add missing u64 in psched_ratecfg_precompute() It seems that commit commit 292f1c7ff6cc10516076ceeea45ed11833bb71c7 Author: Jiri Pirko Date: Tue Feb 12 00:12:03 2013 +0000 sch: make htb_rate_cfg and functions around that generic adds little regression. Before: # tc qdisc add dev eth0 root handle 1: htb default ffff # tc class add dev eth0 classid 1:ffff htb rate 5Gbit # tc -s class show dev eth0 class htb 1:ffff root prio 0 rate 5000Mbit ceil 5000Mbit burst 625b cburst 625b Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 lended: 0 borrowed: 0 giants: 0 tokens: 31 ctokens: 31 After: # tc qdisc add dev eth0 root handle 1: htb default ffff # tc class add dev eth0 classid 1:ffff htb rate 5Gbit # tc -s class show dev eth0 class htb 1:ffff root prio 0 rate 1544Mbit ceil 1544Mbit burst 625b cburst 625b Sent 5073 bytes 41 pkt (dropped 0, overlimits 0 requeues 0) rate 1976bit 2pps backlog 0b 0p requeues 0 lended: 41 borrowed: 0 giants: 0 tokens: 1802 ctokens: 1802 This probably due to lost u64 cast of rate parameter in psched_ratecfg_precompute() (net/sched/sch_generic.c). Signed-off-by: Sergey Popovich Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index ffad48109a22..eac7e0ee23c1 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -904,7 +904,7 @@ void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate) u64 mult; int shift; - r->rate_bps = rate << 3; + r->rate_bps = (u64)rate << 3; r->shift = 0; r->mult = 1; /* -- cgit v1.2.1 From 715230a44310a8cf66fbfb5a46f9a62a9b2de424 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 27 Mar 2013 06:40:50 +0000 Subject: tg3: fix length overflow in VPD firmware parsing Commit 184b89044fb6e2a74611dafa69b1dce0d98612c6 ("tg3: Use VPD fw version when present") introduced VPD parsing that contained a potential length overflow. Limit the hardware's reported firmware string length (max 255 bytes) to stay inside the driver's firmware string length (32 bytes). On overflow, truncate the formatted firmware string instead of potentially overwriting portions of the tg3 struct. http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf Signed-off-by: Kees Cook Reported-by: Oded Horovitz Reported-by: Brad Spengler Cc: stable@vger.kernel.org Cc: Matt Carlson Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 67d2663b3974..17a972734ba7 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14604,8 +14604,11 @@ static void tg3_read_vpd(struct tg3 *tp) if (j + len > block_end) goto partno; - memcpy(tp->fw_ver, &vpd_data[j], len); - strncat(tp->fw_ver, " bc ", vpdlen - len - 1); + if (len >= sizeof(tp->fw_ver)) + len = sizeof(tp->fw_ver) - 1; + memset(tp->fw_ver, 0, sizeof(tp->fw_ver)); + snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len, + &vpd_data[j]); } partno: -- cgit v1.2.1 From 24f11a5cf538a8fcc10d61f457e9a2094fb965b4 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Wed, 27 Mar 2013 06:54:00 +0000 Subject: line up comment for ndo_bridge_getlink Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b3d00fa4b314..8bfa95600e48 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -895,7 +895,7 @@ struct netdev_fcoe_hbainfo { * * int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh) * int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, - * struct net_device *dev) + * struct net_device *dev, u32 filter_mask) * * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier); * Called to change device carrier. Soft-devices (like dummy, team, etc) -- cgit v1.2.1 From e73081d9afd4b5fe285d2a585a73d9c6f73ab0dd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Mar 2013 10:26:15 +0000 Subject: ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT This fixes a regression introduced by commit: 05ec260 mfd:db8500-prcmu: update resource passing All DBx5x0 based SoCs have access to two Tightly Coupled Memory (TCM) locations based on the PRCMU itself. One area from program memory (TCPM) and one for data memory (TCDM). The PRCMU needs to know where these are in order to function correctly. However, these are currently passed though platform device resources, which can only be obtained if Device Tree booting isn't in use. Thus we must also support them in DT by supplying them through the PRCMU node. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/boot/dts/dbx5x0.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9de93096601a..aaa63d0a8096 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -191,8 +191,8 @@ prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>; - reg-names = "prcmu"; + reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.1 From 26135256d3e7d4d12c6268623edc1740888c041f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 27 Mar 2013 10:47:38 +0000 Subject: ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back This fixes a regression introduced during the v3.9 merge window. Now MMCI on/off functionality is using the regulator framework from the MMCI driver, if we provide the ios_handler call-back we essentially duplicate functionality, which causes a large mess and lots of booting issues. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 051b62c27102..7f2cb6c5e2c1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif struct mmci_platform_data mop500_sdi0_data = { - .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | -- cgit v1.2.1 From 265c3c0a64df50c0e8fe55cfe8af8851ed5feca5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 27 Mar 2013 14:13:53 +0000 Subject: ARM: ux500: Enable the clock controlling Ethernet on Snowball This fixes a regression introduced by common clk enablement. On some u8500 based boards, the FMSC clock which is usually used for flash, is wired up to the SMSC911x Ethernet driver. However, the SMSC911x doesn't have common clk support yet, rendering it unusable. Prior to the introduction of common clk the FMSC clock was default on; however, common clk disables all clocks by default and insists drivers take responsibility to enable theirs. This fix enables the FMSC clock on Snowball, subsequently turning on the SMSC911x Ethernet chip. It will be removed when the driver is compatible with common clk. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 12 ++++++++++++ arch/arm/mach-ux500/board-mop500.h | 1 + arch/arm/mach-ux500/cpu-db8500.c | 5 +++-- 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index b03457881c4b..87d2d7b38ce9 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } +void mop500_snowball_ethernet_clock_enable(void) +{ + struct clk *clk; + + clk = clk_get_sys("fsmc", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, @@ -683,6 +693,8 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); + mop500_snowball_ethernet_clock_enable(); + /* This board has full regulator constraints */ regulator_has_full_constraints(); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index eaa605f5d90d..d38951be70df 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); +void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 19235cf7bbe3..f1a581844372 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -312,9 +312,10 @@ static void __init u8500_init_machine(void) /* Pinmaps must be in place before devices register */ if (of_machine_is_compatible("st-ericsson,mop500")) mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + mop500_snowball_ethernet_clock_enable(); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} /* TODO: Add pinmaps for ccu9540 board. */ -- cgit v1.2.1 From 8abbbaf6adb46157b6bd416f7616b555cc6a332f Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 27 Mar 2013 21:42:00 +0100 Subject: drm: don't unlock in the addfb error paths We don't grab the modeset locks any more since commit 468174f748603497e73dba9b5c6d1d9f71121486 Author: Daniel Vetter Date: Tue Dec 11 00:09:12 2012 +0100 drm: push modeset_lock_all into ->fb_create driver callbacks Reported-by: Ray Strode Cc: Ray Strode Cc: Dave Airlie Acked-by: Dave Airlie Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_crtc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 792c3e3795ca..dd64a06dc5b4 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2326,7 +2326,6 @@ int drm_mode_addfb(struct drm_device *dev, fb = dev->mode_config.funcs->fb_create(dev, file_priv, &r); if (IS_ERR(fb)) { DRM_DEBUG_KMS("could not create framebuffer\n"); - drm_modeset_unlock_all(dev); return PTR_ERR(fb); } @@ -2506,7 +2505,6 @@ int drm_mode_addfb2(struct drm_device *dev, fb = dev->mode_config.funcs->fb_create(dev, file_priv, r); if (IS_ERR(fb)) { DRM_DEBUG_KMS("could not create framebuffer\n"); - drm_modeset_unlock_all(dev); return PTR_ERR(fb); } -- cgit v1.2.1 From fa40ef208c955bfe21f53913f51f297ac3237e95 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 27 Mar 2013 16:39:01 +0000 Subject: ASoC: compress: Cancel delayed power down if needed When a new stream is being opened it is necessary to cancel any delayed power down of the audio. [Fixed unused variable -- broonie] Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-compress.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index b5b3db71e253..ed0bfb0ddb96 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -211,19 +211,27 @@ static int soc_compr_set_params(struct snd_compr_stream *cstream, if (platform->driver->compr_ops && platform->driver->compr_ops->set_params) { ret = platform->driver->compr_ops->set_params(cstream, params); if (ret < 0) - goto out; + goto err; } if (rtd->dai_link->compr_ops && rtd->dai_link->compr_ops->set_params) { ret = rtd->dai_link->compr_ops->set_params(cstream); if (ret < 0) - goto out; + goto err; } snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, SND_SOC_DAPM_STREAM_START); -out: + /* cancel any delayed stream shutdown that is pending */ + rtd->pop_wait = 0; + mutex_unlock(&rtd->pcm_mutex); + + cancel_delayed_work_sync(&rtd->delayed_work); + + return ret; + +err: mutex_unlock(&rtd->pcm_mutex); return ret; } -- cgit v1.2.1 From b8730b403aee94db4631bfefb546a6ce8c287dc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 20:49:58 +0100 Subject: iwlwifi: dvm: fix the passive-no-RX workaround Alex Romosan reported that since the mac80211 changes in "mac80211: start auth/assoc timeout on frame status" and the subsequent fixes in "mac80211: fix auth/assoc timeout handling" (commits 1672c0e31917 and 89afe614c0c) there's sometimes an issue connecting to a 5 GHz network with the iwlwifi DVM driver. The reason appears to be that since these commits any bad TX status makes mac80211 immediately try again, causing all of the authentication attempts to be quickly rejected by the firmware as it hasn't heard a beacon yet. Before, it would wait for the timeout regardless of status. To fix this, invoke the passive-no-RX workaround when not associated yet as well. This will cause the first frame to get lost, but then the driver will stop the queues and the second attempt will only be transmitted after hearing a beacon, thus delaying it appropriately to not make the firmware reject it again. Reported-by: Alex Romosan Tested-by: Alex Romosan Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 18 ++++++++---------- drivers/net/wireless/iwlwifi/dvm/tx.c | 2 +- 2 files changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 23be948cf162..a82b6b39d4ff 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1419,6 +1419,14 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); + if (changes & BSS_CHANGED_IDLE && bss_conf->idle) { + /* + * If we go idle, then clearly no "passive-no-rx" + * workaround is needed any more, this is a reset. + */ + iwlagn_lift_passive_no_rx(priv); + } + if (unlikely(!iwl_is_ready(priv))) { IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); mutex_unlock(&priv->mutex); @@ -1450,16 +1458,6 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, priv->timestamp = bss_conf->sync_tsf; ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; } else { - /* - * If we disassociate while there are pending - * frames, just wake up the queues and let the - * frames "escape" ... This shouldn't really - * be happening to start with, but we should - * not get stuck in this case either since it - * can happen if userspace gets confused. - */ - iwlagn_lift_passive_no_rx(priv); - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; if (ctx->ctxid == IWL_RXON_CTX_BSS) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 6aec2df3bb27..d1a670d7b10c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1192,7 +1192,7 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, memset(&info->status, 0, sizeof(info->status)); if (status == TX_STATUS_FAIL_PASSIVE_NO_RX && - iwl_is_associated_ctx(ctx) && ctx->vif && + ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) { /* block and stop all queues */ priv->passive_no_rx = true; -- cgit v1.2.1 From 2992714d431976c4b154875bd18ba61bf4df3b93 Mon Sep 17 00:00:00 2001 From: Eric Hutter Date: Mon, 18 Mar 2013 19:48:56 +0100 Subject: ARM: kirkwood: Fix chip-delay for GoFlex Net This fixes "Too few good blocks within range" issues on GoFlex Net by setting chip-delay to 40. The basic problem was discussed at http://forum.doozan.com/read.php?2,7451 Signed-off-by: Eric Hutter Acked-by: Andrew Lunn Cc: # v3.6.x Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-goflexnet.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index bd83b8fc7c83..c3573be7b92c 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -77,6 +77,7 @@ }; nand@3000000 { + chip-delay = <40>; status = "okay"; partition@0 { -- cgit v1.2.1 From 7f23f62fc31c5c97947414c0937a72e08a947a41 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 20 Mar 2013 16:09:35 +0100 Subject: arm: mvebu: Use local interrupt only for the timer 0 The commit 3a6f08a37 "arm: mvebu: Add support for local interrupt", managed the 28th first interrupts as local interrupt to match the hardware specification. Among these interrupts there are the Gigabits Ethernet ones used by the mvneta driver. Unfortunately the state of the percpu_irq API prevents the driver to use it. Indeed the interrupts have to be freed when the .stop() function is called. As the free_percpu_irq() function don't disable the interrupt line, we have to do it on each CPU before calling this. The function disable_percpu_irq() only disable the percpu on the current CPU and there is no function which allows to disable a percpu irq on a given CPU. Waiting for the extension of the percpu_irq API, this fix allows to use again the mvneta driver. Signed-off-by: Gregory CLEMENT Tested-by: Thomas Petazzoni Tested-by: Masami Hiramatsu Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/irq-armada-370-xp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c index 274ff58271de..6a9195e10579 100644 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c @@ -44,6 +44,8 @@ #define ARMADA_370_XP_MAX_PER_CPU_IRQS (28) +#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5) + #define ACTIVE_DOORBELLS (8) static DEFINE_RAW_SPINLOCK(irq_controller_lock); @@ -62,7 +64,7 @@ static void armada_370_xp_irq_mask(struct irq_data *d) #ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) writel(hwirq, main_int_base + ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS); else @@ -79,7 +81,7 @@ static void armada_370_xp_irq_unmask(struct irq_data *d) #ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) writel(hwirq, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); else @@ -147,7 +149,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h, writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); irq_set_status_flags(virq, IRQ_LEVEL); - if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) { + if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) { irq_set_percpu_devid(virq); irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, handle_percpu_devid_irq); -- cgit v1.2.1 From 0d0644ebc63bce3784ebea28d0355071b4e90525 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Sat, 23 Mar 2013 13:56:58 +0100 Subject: ARM: Kirkwood: fix unused mvsdio gpio pins mvsdio_platform_data allows to pass card detect and write protect gpio numbers to the driver. Some kirkwood boards don't use both pins as they are not connected, and don't set the corresponding value in platform_data. This will leave the unset values in platform_data initialized as 0, which is in fact a valid gpio pin. mvsdio will grab that pin and configure it as gpio, which in turn breaks nand controller as mpp0 also carries nand_io2. This patch fixes the above by initializing unused gpio functions in the platform_data with an invalid (-1) value. Signed-off-by: Sebastian Hesselbarth Reported-by: Soeren Moch Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/guruplug-setup.c | 2 ++ arch/arm/mach-kirkwood/openrd-setup.c | 1 + arch/arm/mach-kirkwood/rd88f6281-setup.c | 1 + 3 files changed, 4 insertions(+) diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 1c6e736cbbf8..08dd739aa709 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = { static struct mvsdio_platform_data guruplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ + .gpio_card_detect = -1, + .gpio_write_protect = -1, }; static struct gpio_led guruplug_led_pins[] = { diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 8ddd69fdc937..6a6eb548307d 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = { static struct mvsdio_platform_data openrd_mvsdio_data = { .gpio_card_detect = 29, /* MPP29 used as SD card detect */ + .gpio_write_protect = -1, }; static unsigned int openrd_mpp_config[] __initdata = { diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index c7d93b48926b..d24223166e06 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = { static struct mvsdio_platform_data rd88f6281_mvsdio_data = { .gpio_card_detect = 28, + .gpio_write_protect = -1, }; static unsigned int rd88f6281_mpp_config[] __initdata = { -- cgit v1.2.1 From 835f6322c691600da5b7fb526f07b1d21d0c88ef Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Tue, 26 Mar 2013 21:44:46 +0000 Subject: arm: orion5x: fix orion5x.dtsi gpio parameters orion5x.dtsi is missing the gpio alias as well as including a typo ('ngpio' instead of 'ngpios') that prevented the orion-gpio driver from loading. Also missing were the interrupt-controller properties. This patches resolves those glitches. Signed-off-by: Alexander Clouter Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/orion5x.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 8aad00f81ed9..7c2a3263c166 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -13,6 +13,9 @@ compatible = "marvell,orion5x"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -32,7 +35,9 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <6>, <7>, <8>, <9>; }; -- cgit v1.2.1 From e0656a9cbbd0444aaec493ed8a9420d07c356639 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Tue, 26 Mar 2013 21:44:49 +0000 Subject: arm: orion5x: correct IRQ used in dtsi for mv_cesa The crypto functionality in the orion5x dtsi uses the Ethernet IRQ and so things do not work and there is much grumbling at boot time. The IRQ for the crypto should be 28, and not 22, and that is what this patch corrects. Signed-off-by: Alexander Clouter Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/orion5x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 7c2a3263c166..f7bec3b1ba32 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -96,7 +96,7 @@ reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; - interrupts = <22>; + interrupts = <28>; status = "okay"; }; }; -- cgit v1.2.1 From 879d68a445dd7073a8c022fcdd21dc27eca7f192 Mon Sep 17 00:00:00 2001 From: Ryan Press Date: Tue, 26 Mar 2013 16:32:31 -0700 Subject: arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. The previous configuration used the wrong "clk" pin. Without this change mv_sdio worked because the bootloader would set the pin up, but with a bootloader that does not set the pin, mv_sdio fails to detect any card. I have tested this change using a mwifiex_sdio wireless network adapter over the SDIO interface. Signed-off-by: Ryan Press Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-mirabox.dts | 2 +- arch/arm/boot/dts/armada-370.dtsi | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index dd0c57dd9f30..3234875824dc 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -54,7 +54,7 @@ }; mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins2>; + pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 8188d138020e..a195debb67d3 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -59,6 +59,12 @@ "mpp50", "mpp51", "mpp52"; marvell,function = "sd0"; }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { -- cgit v1.2.1 From 91c5746425aed8f7188a351f1224a26aa232e4b3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 27 Mar 2013 18:28:41 +0000 Subject: aoe: reserve enough headroom on skbs Some network drivers use a non default hard_header_len Transmitted skb should take into account dev->hard_header_len, or risk crashes or expensive reallocations. In the case of aoe, lets reserve MAX_HEADER bytes. David reported a crash in defxx driver, solved by this patch. Reported-by: David Oostdyk Tested-by: David Oostdyk Signed-off-by: Eric Dumazet Cc: Ed Cashin Signed-off-by: David S. Miller --- drivers/block/aoe/aoecmd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 25ef5c014fca..92b6d7c51e39 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -51,8 +51,9 @@ new_skb(ulong len) { struct sk_buff *skb; - skb = alloc_skb(len, GFP_ATOMIC); + skb = alloc_skb(len + MAX_HEADER, GFP_ATOMIC); if (skb) { + skb_reserve(skb, MAX_HEADER); skb_reset_mac_header(skb); skb_reset_network_header(skb); skb->protocol = __constant_htons(ETH_P_AOE); -- cgit v1.2.1 From b43decd2c513ae44a5462a1a4c2622f0fa77c9e0 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Sun, 24 Mar 2013 15:36:38 +0100 Subject: drm/nouveau: fix handling empty channel list in ioctl's If there are no channels, chan would never end up being NULL, and so the null pointer check would fail. Solve this by initializing chan to NULL, and iterating over temp instead. Fixes oops when running intel-gpu-tools/tests/kms_flip, which attempts to do some intel ioctl's on a nouveau device. Signed-off-by: Maarten Lankhorst Cc: stable@vger.kernel.org [3.7+] Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_abi16.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c index 3b6dc883e150..5eb3e0da7c6e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_abi16.c +++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c @@ -391,7 +391,7 @@ nouveau_abi16_ioctl_notifierobj_alloc(ABI16_IOCTL_ARGS) struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_device *device = nv_device(drm->device); struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev); - struct nouveau_abi16_chan *chan, *temp; + struct nouveau_abi16_chan *chan = NULL, *temp; struct nouveau_abi16_ntfy *ntfy; struct nouveau_object *object; struct nv_dma_class args = {}; @@ -404,10 +404,11 @@ nouveau_abi16_ioctl_notifierobj_alloc(ABI16_IOCTL_ARGS) if (unlikely(nv_device(abi16->device)->card_type >= NV_C0)) return nouveau_abi16_put(abi16, -EINVAL); - list_for_each_entry_safe(chan, temp, &abi16->channels, head) { - if (chan->chan->handle == (NVDRM_CHAN | info->channel)) + list_for_each_entry(temp, &abi16->channels, head) { + if (temp->chan->handle == (NVDRM_CHAN | info->channel)) { + chan = temp; break; - chan = NULL; + } } if (!chan) @@ -459,17 +460,18 @@ nouveau_abi16_ioctl_gpuobj_free(ABI16_IOCTL_ARGS) { struct drm_nouveau_gpuobj_free *fini = data; struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev); - struct nouveau_abi16_chan *chan, *temp; + struct nouveau_abi16_chan *chan = NULL, *temp; struct nouveau_abi16_ntfy *ntfy; int ret; if (unlikely(!abi16)) return -ENOMEM; - list_for_each_entry_safe(chan, temp, &abi16->channels, head) { - if (chan->chan->handle == (NVDRM_CHAN | fini->channel)) + list_for_each_entry(temp, &abi16->channels, head) { + if (temp->chan->handle == (NVDRM_CHAN | fini->channel)) { + chan = temp; break; - chan = NULL; + } } if (!chan) -- cgit v1.2.1 From e4604d8fe8492f8120cf92d4b60b3cc90ba87bd0 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Sun, 24 Mar 2013 12:56:30 +0100 Subject: drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() Op 23-03-13 12:47, Peter Hurley schreef: > On Tue, 2013-03-19 at 11:13 -0400, Peter Hurley wrote: >> On vanilla 3.9.0-rc3, I get this 100% repeatable oops after login when >> the user X session is coming up: > Perhaps I wasn't clear that this happens on every boot and is a > regression from 3.8 > > I'd be happy to help resolve this but time is of the essence; it would > be a shame to have to revert all of this for 3.9 Well it broke on my system too, so it was easy to fix. I didn't even need gdm to trigger it! >8---- This fixes regression caused by 1d7c71a3e2f7 (drm/nouveau/disp: port vblank handling to event interface), which causes a oops in the following way: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<0000000000000001>] 0x0 PGD 0 Oops: 0010 [#1] PREEMPT SMP Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables ...... CPU 3 Pid: 0, comm: swapper/3 Not tainted 3.9.0-rc3-xeon #rc3 Dell Inc. Precision WorkStation T5400 /0RW203 RIP: 0010:[<0000000000000001>] [<0000000000000001>] 0x0 RSP: 0018:ffff8802afcc3d80 EFLAGS: 00010087 RAX: ffff88029f6e5808 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000096 RSI: 0000000000000001 RDI: ffff88029f6e5808 RBP: ffff8802afcc3dc8 R08: 0000000000000000 R09: 0000000000000004 R10: 000000000000002c R11: ffff88029e559a98 R12: ffff8802a376cb78 R13: ffff88029f6e57e0 R14: ffff88029f6e57f8 R15: ffff88029f6e5808 FS: 0000000000000000(0000) GS:ffff8802afcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000001 CR3: 000000029fa67000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/3 (pid: 0, threadinfo ffff8802a355e000, task ffff8802a3535c40) Stack: ffffffffa0159d8a 0000000000000082 ffff88029f6e5820 0000000000000001 ffff88029f71aa00 0000000000000000 0000000000000000 0000000004000000 0000000004000000 ffff8802afcc3e38 ffffffffa01843b5 ffff8802afcc3df8 Call Trace: [] ? nouveau_event_trigger+0xaa/0xe0 [nouveau] [] nv50_disp_intr+0xc5/0x200 [nouveau] [] ? _raw_spin_unlock_irqrestore+0x2c/0x50 [] ? notifier_call_chain+0x4d/0x70 [] nouveau_mc_intr+0xb5/0x110 [nouveau] [] nouveau_irq_handler+0x6f/0x80 [nouveau] [] handle_irq_event_percpu+0x75/0x260 [] handle_irq_event+0x48/0x70 [] handle_fasteoi_irq+0x5a/0x100 [] handle_irq+0x22/0x40 [] do_IRQ+0x5a/0xd0 [] common_interrupt+0x6d/0x6d [] ? native_safe_halt+0x6/0x10 [] default_idle+0x3d/0x170 [] cpu_idle+0x116/0x130 [] start_secondary+0x251/0x258 Code: Bad RIP value. RIP [<0000000000000001>] 0x0 RSP CR2: 0000000000000001 ---[ end trace 907323cb8ce6f301 ]--- Signed-off-by: Maarten Lankhorst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 32 ++++++++++++++++++++------------ drivers/gpu/drm/nouveau/nouveau_drm.h | 2 +- 2 files changed, 21 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index d1099365bfc1..c95decf543e9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -71,12 +71,26 @@ module_param_named(modeset, nouveau_modeset, int, 0400); static struct drm_driver driver; +static int +nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head) +{ + struct nouveau_drm *drm = + container_of(event, struct nouveau_drm, vblank[head]); + drm_handle_vblank(drm->dev, head); + return NVKM_EVENT_KEEP; +} + static int nouveau_drm_vblank_enable(struct drm_device *dev, int head) { struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_disp *pdisp = nouveau_disp(drm->device); - nouveau_event_get(pdisp->vblank, head, &drm->vblank); + + if (WARN_ON_ONCE(head > ARRAY_SIZE(drm->vblank))) + return -EIO; + WARN_ON_ONCE(drm->vblank[head].func); + drm->vblank[head].func = nouveau_drm_vblank_handler; + nouveau_event_get(pdisp->vblank, head, &drm->vblank[head]); return 0; } @@ -85,16 +99,11 @@ nouveau_drm_vblank_disable(struct drm_device *dev, int head) { struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_disp *pdisp = nouveau_disp(drm->device); - nouveau_event_put(pdisp->vblank, head, &drm->vblank); -} - -static int -nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head) -{ - struct nouveau_drm *drm = - container_of(event, struct nouveau_drm, vblank); - drm_handle_vblank(drm->dev, head); - return NVKM_EVENT_KEEP; + if (drm->vblank[head].func) + nouveau_event_put(pdisp->vblank, head, &drm->vblank[head]); + else + WARN_ON_ONCE(1); + drm->vblank[head].func = NULL; } static u64 @@ -292,7 +301,6 @@ nouveau_drm_load(struct drm_device *dev, unsigned long flags) dev->dev_private = drm; drm->dev = dev; - drm->vblank.func = nouveau_drm_vblank_handler; INIT_LIST_HEAD(&drm->clients); spin_lock_init(&drm->tile.lock); diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h b/drivers/gpu/drm/nouveau/nouveau_drm.h index b25df374c901..9c39bafbef2c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.h +++ b/drivers/gpu/drm/nouveau/nouveau_drm.h @@ -113,7 +113,7 @@ struct nouveau_drm { struct nvbios vbios; struct nouveau_display *display; struct backlight_device *backlight; - struct nouveau_eventh vblank; + struct nouveau_eventh vblank[4]; /* power management */ struct nouveau_pm *pm; -- cgit v1.2.1 From 5b4617d82020addf244c8c5206270e49ef9933d6 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 28 Mar 2013 00:07:29 +0400 Subject: HID: fix Masterkit MA901 hid quirks This patch reverts commit 0322bd3980 ("usb hid quirks for Masterkit MA901 usb radio") and adds checks in hid_ignore() for Masterkit MA901 usb radio device. This usb radio device shares USB ID with many Atmel V-USB (and probably other) devices so patch sorts things out by checking name, vendor, product of hid device. Signed-off-by: Alexey Klimov Acked-by: Mauro Carvalho Chehab Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 13 ++++++++++++- drivers/hid/hid-ids.h | 5 ++--- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 512b01c04ea7..aa341d135867 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2077,7 +2077,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) }, { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) }, { HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) }, { HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) }, @@ -2244,6 +2243,18 @@ bool hid_ignore(struct hid_device *hdev) hdev->product <= USB_DEVICE_ID_VELLEMAN_K8061_LAST)) return true; break; + case USB_VENDOR_ID_ATMEL_V_USB: + /* Masterkit MA901 usb radio based on Atmel tiny85 chip and + * it has the same USB ID as many Atmel V-USB devices. This + * usb radio is handled by radio-ma901.c driver so we want + * ignore the hid. Check the name, bus, product and ignore + * if we have MA901 usb radio. + */ + if (hdev->product == USB_DEVICE_ID_ATMEL_V_USB && + hdev->bus == BUS_USB && + strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0) + return true; + break; } if (hdev->type == HID_TYPE_USBMOUSE && diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index c4388776f4e4..5309fd5eb0eb 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -158,6 +158,8 @@ #define USB_VENDOR_ID_ATMEL 0x03eb #define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c #define USB_DEVICE_ID_ATMEL_MXT_DIGITIZER 0x2118 +#define USB_VENDOR_ID_ATMEL_V_USB 0x16c0 +#define USB_DEVICE_ID_ATMEL_V_USB 0x05df #define USB_VENDOR_ID_AUREAL 0x0755 #define USB_DEVICE_ID_AUREAL_W01RN 0x2626 @@ -557,9 +559,6 @@ #define USB_VENDOR_ID_MADCATZ 0x0738 #define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540 -#define USB_VENDOR_ID_MASTERKIT 0x16c0 -#define USB_DEVICE_ID_MASTERKIT_MA901RADIO 0x05df - #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 #define USB_DEVICE_ID_MCC_PMD1208LS 0x007a -- cgit v1.2.1 From 30b29537bcba070b3df8d7d24c1975676a1a6a4f Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 28 Mar 2013 00:08:19 +0400 Subject: media: radio-ma901: return ENODEV in probe if usb_device doesn't match Masterkit MA901 usb radio device shares USB ID with Atmel V-USB devices. This patch adds additional checks in usb_ma901radio_probe() and if product or manufacturer doesn't match we return -ENODEV and don't continue. This allows hid drivers to handle not MA901 device. Signed-off-by: Alexey Klimov Acked-by: Mauro Carvalho Chehab Signed-off-by: Jiri Kosina --- drivers/media/radio/radio-ma901.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/radio/radio-ma901.c b/drivers/media/radio/radio-ma901.c index c61f590029ad..348dafc0318a 100644 --- a/drivers/media/radio/radio-ma901.c +++ b/drivers/media/radio/radio-ma901.c @@ -347,9 +347,20 @@ static void usb_ma901radio_release(struct v4l2_device *v4l2_dev) static int usb_ma901radio_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct usb_device *dev = interface_to_usbdev(intf); struct ma901radio_device *radio; int retval = 0; + /* Masterkit MA901 usb radio has the same USB ID as many others + * Atmel V-USB devices. Let's make additional checks to be sure + * that this is our device. + */ + + if (dev->product && dev->manufacturer && + (strncmp(dev->product, "MA901", 5) != 0 + || strncmp(dev->manufacturer, "www.masterkit.ru", 16) != 0)) + return -ENODEV; + radio = kzalloc(sizeof(struct ma901radio_device), GFP_KERNEL); if (!radio) { dev_err(&intf->dev, "kzalloc for ma901radio_device failed\n"); -- cgit v1.2.1 From 35e5cbc0af240778e61113286c019837e06aeec6 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 29 Mar 2013 15:39:16 +0100 Subject: reiserfs: Fix warning and inode leak when deleting inode with xattrs After commit 21d8a15a (lookup_one_len: don't accept . and ..) reiserfs started failing to delete xattrs from inode. This was due to a buggy test for '.' and '..' in fill_with_dentries() which resulted in passing '.' and '..' entries to lookup_one_len() in some cases. That returned error and so we failed to iterate over all xattrs of and inode. Fix the test in fill_with_dentries() along the lines of the one in lookup_one_len(). Reported-by: Pawel Zawora CC: stable@vger.kernel.org Signed-off-by: Jan Kara --- fs/reiserfs/xattr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index c196369fe408..4cce1d9552fb 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -187,8 +187,8 @@ fill_with_dentries(void *buf, const char *name, int namelen, loff_t offset, if (dbuf->count == ARRAY_SIZE(dbuf->dentries)) return -ENOSPC; - if (name[0] == '.' && (name[1] == '\0' || - (name[1] == '.' && name[2] == '\0'))) + if (name[0] == '.' && (namelen < 2 || + (namelen == 2 && name[1] == '.'))) return 0; dentry = lookup_one_len(name, dbuf->xadir, namelen); -- cgit v1.2.1 From 9cfe8b156c21cf340b3a10ecb3022fbbc1c39185 Mon Sep 17 00:00:00 2001 From: Mirko Lindner Date: Tue, 26 Mar 2013 06:38:35 +0000 Subject: sky2: Receive Overflows not counted The sky2 driver doesn't count the Receive Overflows because the MAC interrupt for this event is not set in the MAC's interrupt mask. The MAC's interrupt mask is set only for Transmit FIFO Underruns. Fix: The correct setting should be (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) Otherwise the Receive Overflow event will not generate any interrupt. The Receive Overflow interrupt is handled correctly Signed-off-by: Mirko Lindner Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index 615ac63ea860..ec6dcd80152b 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2074,7 +2074,7 @@ enum { GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ -#define GMAC_DEF_MSK GM_IS_TX_FF_UR +#define GMAC_DEF_MSK (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) }; /* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ -- cgit v1.2.1 From 74f9f42c1c1650e74fb464f76644c9041f996851 Mon Sep 17 00:00:00 2001 From: Mirko Lindner Date: Tue, 26 Mar 2013 06:38:42 +0000 Subject: sky2: Threshold for Pause Packet is set wrong The sky2 driver sets the Rx Upper Threshold for Pause Packet generation to a wrong value which leads to only 2kB of RAM remaining space. This can lead to Rx overflow errors even with activated flow-control. Fix: We should increase the value to 8192/8 Signed-off-by: Mirko Lindner Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index fc07ca35721b..6a0e671fcecd 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1067,7 +1067,7 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space) sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp); sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2); - tp = space - 2048/8; + tp = space - 8192/8; sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp); sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4); } else { -- cgit v1.2.1 From 1c4a154e5253687c51123956dfcee9e9dfa8542d Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Tue, 26 Mar 2013 08:13:34 +0000 Subject: ipv6: don't accept node local multicast traffic from the wire Erik Hugne's errata proposal (Errata ID: 3480) to RFC4291 has been verified: http://www.rfc-editor.org/errata_search.php?eid=3480 We have to check for pkt_type and loopback flag because either the packets are allowed to travel over the loopback interface (in which case pkt_type is PACKET_HOST and IFF_LOOPBACK flag is set) or they travel over a non-loopback interface back to us (in which case PACKET_TYPE is PACKET_LOOPBACK and IFF_LOOPBACK flag is not set). Cc: Erik Hugne Cc: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/ip6_input.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index e33fe0ab2568..2bab2aa59745 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -118,6 +118,18 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt ipv6_addr_loopback(&hdr->daddr)) goto err; + /* RFC4291 Errata ID: 3480 + * Interface-Local scope spans only a single interface on a + * node and is useful only for loopback transmission of + * multicast. Packets with interface-local scope received + * from another node must be discarded. + */ + if (!(skb->pkt_type == PACKET_LOOPBACK || + dev->flags & IFF_LOOPBACK) && + ipv6_addr_is_multicast(&hdr->daddr) && + IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1) + goto err; + /* RFC4291 2.7 * Nodes must not originate a packet to a multicast address whose scope * field contains the reserved value 0; if such a packet is received, it -- cgit v1.2.1 From 1bc7db16782c2a581fb4d53ca853631050f31611 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 27 Mar 2013 03:32:41 +0000 Subject: bonding: fix disabling of arp_interval and miimon Currently if either arp_interval or miimon is disabled, they both get disabled, and upon disabling they get executed once more which is not the proper behaviour. Also when doing a no-op and disabling an already disabled one, the other again gets disabled. Also fix the error messages with the proper valid ranges, and a small typo fix in the up delay error message (outputting "down delay", instead of "up delay"). Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 92 +++++++++++++++++++++------------------- 1 file changed, 48 insertions(+), 44 deletions(-) diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index db103e03ba05..ea7a388f4843 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -527,7 +527,7 @@ static ssize_t bonding_store_arp_interval(struct device *d, goto out; } if (new_value < 0) { - pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n", + pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n", bond->dev->name, new_value, INT_MAX); ret = -EINVAL; goto out; @@ -542,14 +542,15 @@ static ssize_t bonding_store_arp_interval(struct device *d, pr_info("%s: Setting ARP monitoring interval to %d.\n", bond->dev->name, new_value); bond->params.arp_interval = new_value; - if (bond->params.miimon) { - pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", - bond->dev->name, bond->dev->name); - bond->params.miimon = 0; - } - if (!bond->params.arp_targets[0]) { - pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", - bond->dev->name); + if (new_value) { + if (bond->params.miimon) { + pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", + bond->dev->name, bond->dev->name); + bond->params.miimon = 0; + } + if (!bond->params.arp_targets[0]) + pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", + bond->dev->name); } if (bond->dev->flags & IFF_UP) { /* If the interface is up, we may need to fire off @@ -557,10 +558,13 @@ static ssize_t bonding_store_arp_interval(struct device *d, * timer will get fired off when the open function * is called. */ - cancel_delayed_work_sync(&bond->mii_work); - queue_delayed_work(bond->wq, &bond->arp_work, 0); + if (!new_value) { + cancel_delayed_work_sync(&bond->arp_work); + } else { + cancel_delayed_work_sync(&bond->mii_work); + queue_delayed_work(bond->wq, &bond->arp_work, 0); + } } - out: rtnl_unlock(); return ret; @@ -702,7 +706,7 @@ static ssize_t bonding_store_downdelay(struct device *d, } if (new_value < 0) { pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; } else { @@ -757,8 +761,8 @@ static ssize_t bonding_store_updelay(struct device *d, goto out; } if (new_value < 0) { - pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; } else { @@ -968,37 +972,37 @@ static ssize_t bonding_store_miimon(struct device *d, } if (new_value < 0) { pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; - } else { - pr_info("%s: Setting MII monitoring interval to %d.\n", - bond->dev->name, new_value); - bond->params.miimon = new_value; - if (bond->params.updelay) - pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n", - bond->dev->name, - bond->params.updelay * bond->params.miimon); - if (bond->params.downdelay) - pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n", - bond->dev->name, - bond->params.downdelay * bond->params.miimon); - if (bond->params.arp_interval) { - pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n", - bond->dev->name); - bond->params.arp_interval = 0; - if (bond->params.arp_validate) { - bond->params.arp_validate = - BOND_ARP_VALIDATE_NONE; - } - } - - if (bond->dev->flags & IFF_UP) { - /* If the interface is up, we may need to fire off - * the MII timer. If the interface is down, the - * timer will get fired off when the open function - * is called. - */ + } + pr_info("%s: Setting MII monitoring interval to %d.\n", + bond->dev->name, new_value); + bond->params.miimon = new_value; + if (bond->params.updelay) + pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.updelay * bond->params.miimon); + if (bond->params.downdelay) + pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.downdelay * bond->params.miimon); + if (new_value && bond->params.arp_interval) { + pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n", + bond->dev->name); + bond->params.arp_interval = 0; + if (bond->params.arp_validate) + bond->params.arp_validate = BOND_ARP_VALIDATE_NONE; + } + if (bond->dev->flags & IFF_UP) { + /* If the interface is up, we may need to fire off + * the MII timer. If the interface is down, the + * timer will get fired off when the open function + * is called. + */ + if (!new_value) { + cancel_delayed_work_sync(&bond->mii_work); + } else { cancel_delayed_work_sync(&bond->arp_work); queue_delayed_work(bond->wq, &bond->mii_work, 0); } -- cgit v1.2.1 From ff7f3efb9abf986f4ecd8793a9593f7ca4d6431a Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 29 Mar 2013 13:50:21 -0400 Subject: tile: expect new initramfs name from hypervisor file system The current Tilera boot infrastructure now provides the initramfs to Linux as a Tilera-hypervisor file named "initramfs", rather than "initramfs.cpio.gz", as before. (This makes it reasonable to use other compression techniques than gzip on the file without having to worry about the name causing confusion.) Adapt to use the new name, but also fall back to checking for the old name. Cc'ing to stable so that older kernels will remain compatible with newer Tilera boot infrastructure. Signed-off-by: Chris Metcalf Cc: stable@vger.kernel.org --- arch/tile/kernel/setup.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index d1e15f7b59c6..7a5aa1a7864e 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -1004,15 +1004,8 @@ void __cpuinit setup_cpu(int boot) #ifdef CONFIG_BLK_DEV_INITRD -/* - * Note that the kernel can potentially support other compression - * techniques than gz, though we don't do so by default. If we ever - * decide to do so we can either look for other filename extensions, - * or just allow a file with this name to be compressed with an - * arbitrary compressor (somewhat counterintuitively). - */ static int __initdata set_initramfs_file; -static char __initdata initramfs_file[128] = "initramfs.cpio.gz"; +static char __initdata initramfs_file[128] = "initramfs"; static int __init setup_initramfs_file(char *str) { @@ -1026,9 +1019,9 @@ static int __init setup_initramfs_file(char *str) early_param("initramfs_file", setup_initramfs_file); /* - * We look for an "initramfs.cpio.gz" file in the hvfs. - * If there is one, we allocate some memory for it and it will be - * unpacked to the initramfs. + * We look for a file called "initramfs" in the hvfs. If there is one, we + * allocate some memory for it and it will be unpacked to the initramfs. + * If it's compressed, the initd code will uncompress it first. */ static void __init load_hv_initrd(void) { @@ -1038,10 +1031,16 @@ static void __init load_hv_initrd(void) fd = hv_fs_findfile((HV_VirtAddr) initramfs_file); if (fd == HV_ENOENT) { - if (set_initramfs_file) + if (set_initramfs_file) { pr_warning("No such hvfs initramfs file '%s'\n", initramfs_file); - return; + return; + } else { + /* Try old backwards-compatible name. */ + fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz"); + if (fd == HV_ENOENT) + return; + } } BUG_ON(fd < 0); stat = hv_fs_fstat(fd); -- cgit v1.2.1 From 50eab0503a7579ada512e4968738b7c9737cf36e Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Wed, 27 Mar 2013 23:42:41 +0000 Subject: net: fix the use of this_cpu_ptr flush_tasklet is not percpu var, and percpu is percpu var, and this_cpu_ptr(&info->cache->percpu->flush_tasklet) is not equal to &this_cpu_ptr(info->cache->percpu)->flush_tasklet 1f743b076(use this_cpu_ptr per-cpu helper) introduced this bug. Signed-off-by: Li RongQing Signed-off-by: David S. Miller --- net/core/flow.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/flow.c b/net/core/flow.c index c56ea6f7f6c7..2bfd081c59f7 100644 --- a/net/core/flow.c +++ b/net/core/flow.c @@ -328,7 +328,7 @@ static void flow_cache_flush_per_cpu(void *data) struct flow_flush_info *info = data; struct tasklet_struct *tasklet; - tasklet = this_cpu_ptr(&info->cache->percpu->flush_tasklet); + tasklet = &this_cpu_ptr(info->cache->percpu)->flush_tasklet; tasklet->data = (unsigned long)info; tasklet_schedule(tasklet); } -- cgit v1.2.1 From 4c51e53689569398d656e631c17308d9b8e84650 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 28 Mar 2013 02:34:41 +0000 Subject: smsc75xx: fix jumbo frame support This patch enables RX of jumbo frames for LAN7500. Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count). With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header). Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 9abe51710f22..1a15ec14c386 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -914,8 +914,12 @@ static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size) static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu) { struct usbnet *dev = netdev_priv(netdev); + int ret; + + if (new_mtu > MAX_SINGLE_PACKET_SIZE) + return -EINVAL; - int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu); + ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN); if (ret < 0) { netdev_warn(dev->net, "Failed to set mac rx frame length\n"); return ret; @@ -1324,7 +1328,7 @@ static int smsc75xx_reset(struct usbnet *dev) netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf); - ret = smsc75xx_set_rx_max_frame_length(dev, 1514); + ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN); if (ret < 0) { netdev_warn(dev->net, "Failed to set max rx frame length\n"); return ret; @@ -2134,8 +2138,8 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT)) dev->net->stats.rx_frame_errors++; } else { - /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ - if (unlikely(size > (ETH_FRAME_LEN + 12))) { + /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */ + if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) { netif_dbg(dev, rx_err, dev->net, "size err rx_cmd_a=0x%08x\n", rx_cmd_a); -- cgit v1.2.1 From a561cf7edf9863198bfccecfc5cfe26d951ebd20 Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Wed, 27 Mar 2013 23:13:26 +0000 Subject: net: core: Remove redundant call to 'nf_reset' in 'dev_forward_skb' 'nf_reset' is called just prior calling 'netif_rx'. No need to call it twice. Reported-by: Igor Michailov Signed-off-by: Shmulik Ladkani Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index b13e5c766c11..6591440cc03d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1624,7 +1624,6 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb) } skb_orphan(skb); - nf_reset(skb); if (unlikely(!is_skb_forwardable(dev, skb))) { atomic_long_inc(&dev->rx_dropped); -- cgit v1.2.1 From dc574f1d52d893f516f3786ff7635450bac00eef Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 28 Mar 2013 11:32:44 +0000 Subject: net: calxedaxgmac: fix rx ring handling when OOM If skb allocation for the rx ring fails repeatedly, we can reach a point were the ring is empty. In this condition, the driver is out of sync with the h/w. While this has always been possible, the removal of the skb recycling seems to have made triggering this problem easier. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index a170065b5973..bb1e80bfa78a 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1141,6 +1141,9 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit) struct sk_buff *skb; int frame_len; + if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ)) + break; + entry = priv->rx_tail; p = priv->dma_rx + entry; if (desc_get_owner(p)) -- cgit v1.2.1 From e6c3827dcfe53dd78b824d2ee4007a216ada739e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 28 Mar 2013 11:32:45 +0000 Subject: net: calxedaxgmac: Wake-on-LAN fixes WOL is broken because the magic packet status bit is getting set rather than the enable bit. The PMT interrupt is not getting serviced because the PMT interrupt is also enabled on the global interrupt, but not cleared by the global interrupt and the global interrupt is higher priority. This fixes both of these issues to get WOL working. There's still a problem with receive after resume, but at least now we can wake-up. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index bb1e80bfa78a..b0ebc9f6d55e 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -163,6 +163,7 @@ #define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ /* XGMAC_INT_STAT reg */ +#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */ #define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */ #define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */ @@ -960,6 +961,9 @@ static int xgmac_hw_init(struct net_device *dev) writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS); writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA); + /* Mask power mgt interrupt */ + writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT); + /* XGMAC requires AXI bus init. This is a 'magic number' for now */ writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS); @@ -1828,7 +1832,7 @@ static void xgmac_pmt(void __iomem *ioaddr, unsigned long mode) unsigned int pmt = 0; if (mode & WAKE_MAGIC) - pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT; + pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN; if (mode & WAKE_UCAST) pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST; -- cgit v1.2.1 From cd68ddd4c29ab523440299f24ff2417fe7a0dca6 Mon Sep 17 00:00:00 2001 From: Vijay Subramanian Date: Thu, 28 Mar 2013 13:52:00 +0000 Subject: net: fq_codel: Fix off-by-one error Currently, we hold a max of sch->limit -1 number of packets instead of sch->limit packets. Fix this off-by-one error. Signed-off-by: Vijay Subramanian Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_fq_codel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index 4e606fcb2534..55786283a3df 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -195,7 +195,7 @@ static int fq_codel_enqueue(struct sk_buff *skb, struct Qdisc *sch) flow->deficit = q->quantum; flow->dropped = 0; } - if (++sch->q.qlen < sch->limit) + if (++sch->q.qlen <= sch->limit) return NET_XMIT_SUCCESS; q->drop_overlimit++; -- cgit v1.2.1 From 188ab1b105c96656f6bcfb49d0d8bb1b1936b632 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Thu, 28 Mar 2013 18:10:50 +0000 Subject: atl1e: drop pci-msi support because of packet corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Usage of pci-msi results in corrupted dma packet transfers to the host. Reported-by: rebelyouth Cc: Huang, Xiong Tested-by: Christian Sünkenberg Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1e/atl1e.h | 1 - drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 19 ++----------------- 2 files changed, 2 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h index 829b5ad71d0d..edfdf6b950e7 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e.h +++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h @@ -438,7 +438,6 @@ struct atl1e_adapter { struct atl1e_hw hw; struct atl1e_hw_stats hw_stats; - bool have_msi; u32 wol; u16 link_speed; u16 link_duplex; diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index 92f4734f860d..f73d5609439a 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -1849,34 +1849,19 @@ static void atl1e_free_irq(struct atl1e_adapter *adapter) struct net_device *netdev = adapter->netdev; free_irq(adapter->pdev->irq, netdev); - - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); } static int atl1e_request_irq(struct atl1e_adapter *adapter) { struct pci_dev *pdev = adapter->pdev; struct net_device *netdev = adapter->netdev; - int flags = 0; int err = 0; - adapter->have_msi = true; - err = pci_enable_msi(pdev); - if (err) { - netdev_dbg(netdev, - "Unable to allocate MSI interrupt Error: %d\n", err); - adapter->have_msi = false; - } - - if (!adapter->have_msi) - flags |= IRQF_SHARED; - err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev); + err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name, + netdev); if (err) { netdev_dbg(adapter->netdev, "Unable to allocate interrupt Error: %d\n", err); - if (adapter->have_msi) - pci_disable_msi(pdev); return err; } netdev_dbg(netdev, "atl1e_request_irq OK\n"); -- cgit v1.2.1 From 8622315e0142eba78ec0a8075b5a6fd481a059a4 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 28 Mar 2013 23:54:08 +0000 Subject: MAINTAINERS: Update netxen_nic maintainers list o Add myself to netxen_nic maintainers list Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 457ff5c52396..6e6d606e13dc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5562,6 +5562,7 @@ F: include/uapi/linux/if_* F: include/uapi/linux/netdevice.h NETXEN (1/10) GbE SUPPORT +M: Manish Chopra M: Sony Chacko M: Rajesh Borundia L: netdev@vger.kernel.org -- cgit v1.2.1 From 00cfec37484761a44a3b6f4675a54caa618210ae Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 Mar 2013 03:01:22 +0000 Subject: net: add a synchronize_net() in netdev_rx_handler_unregister() commit 35d48903e97819 (bonding: fix rx_handler locking) added a race in bonding driver, reported by Steven Rostedt who did a very good diagnosis : I'm currently debugging a crash in an old 3.0-rt kernel that one of our customers is seeing. The bug happens with a stress test that loads and unloads the bonding module in a loop (I don't know all the details as I'm not the one that is directly interacting with the customer). But the bug looks to be something that may still be present and possibly present in mainline too. It will just be much harder to trigger it in mainline. In -rt, interrupts are threads, and can schedule in and out just like any other thread. Note, mainline now supports interrupt threads so this may be easily reproducible in mainline as well. I don't have the ability to tell the customer to try mainline or other kernels, so my hands are somewhat tied to what I can do. But according to a core dump, I tracked down that the eth irq thread crashed in bond_handle_frame() here: slave = bond_slave_get_rcu(skb->dev); bond = slave->bond; <--- BUG the slave returned was NULL and accessing slave->bond caused a NULL pointer dereference. Looking at the code that unregisters the handler: void netdev_rx_handler_unregister(struct net_device *dev) { ASSERT_RTNL(); RCU_INIT_POINTER(dev->rx_handler, NULL); RCU_INIT_POINTER(dev->rx_handler_data, NULL); } Which is basically: dev->rx_handler = NULL; dev->rx_handler_data = NULL; And looking at __netif_receive_skb() we have: rx_handler = rcu_dereference(skb->dev->rx_handler); if (rx_handler) { if (pt_prev) { ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = NULL; } switch (rx_handler(&skb)) { My question to all of you is, what stops this interrupt from happening while the bonding module is unloading? What happens if the interrupt triggers and we have this: CPU0 CPU1 ---- ---- rx_handler = skb->dev->rx_handler netdev_rx_handler_unregister() { dev->rx_handler = NULL; dev->rx_handler_data = NULL; rx_handler() bond_handle_frame() { slave = skb->dev->rx_handler; bond = slave->bond; <-- NULL pointer dereference!!! What protection am I missing in the bond release handler that would prevent the above from happening? We can fix bug this in two ways. First is adding a test in bond_handle_frame() and others to check if rx_handler_data is NULL. A second way is adding a synchronize_net() in netdev_rx_handler_unregister() to make sure that a rcu protected reader has the guarantee to see a non NULL rx_handler_data. The second way is better as it avoids an extra test in fast path. Reported-by: Steven Rostedt Signed-off-by: Eric Dumazet Cc: Jiri Pirko Cc: Paul E. McKenney Acked-by: Steven Rostedt Reviewed-by: Paul E. McKenney Signed-off-by: David S. Miller --- net/core/dev.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index 6591440cc03d..13e6447f0398 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3313,6 +3313,7 @@ int netdev_rx_handler_register(struct net_device *dev, if (dev->rx_handler) return -EBUSY; + /* Note: rx_handler_data must be set before rx_handler */ rcu_assign_pointer(dev->rx_handler_data, rx_handler_data); rcu_assign_pointer(dev->rx_handler, rx_handler); @@ -3333,6 +3334,11 @@ void netdev_rx_handler_unregister(struct net_device *dev) ASSERT_RTNL(); RCU_INIT_POINTER(dev->rx_handler, NULL); + /* a reader seeing a non NULL rx_handler in a rcu_read_lock() + * section has a guarantee to see a non NULL rx_handler_data + * as well. + */ + synchronize_net(); RCU_INIT_POINTER(dev->rx_handler_data, NULL); } EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister); -- cgit v1.2.1 From 14bc435ea54cb888409efb54fc6b76c13ef530e9 Mon Sep 17 00:00:00 2001 From: "Max.Nekludov@us.elster.com" Date: Fri, 29 Mar 2013 05:27:36 +0000 Subject: ks8851: Fix interpretation of rxlen field. According to the Datasheet (page 52): 15-12 Reserved 11-0 RXBC Receive Byte Count This field indicates the present received frame byte size. The code has a bug: rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied Signed-off-by: Max Nekludov Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index 33bcb63d56a2..8fb481252e2c 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -528,7 +528,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) for (; rxfc != 0; rxfc--) { rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; - rxlen = rxh >> 16; + rxlen = (rxh >> 16) & 0xfff; netif_dbg(ks, rx_status, ks->netdev, "rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen); -- cgit v1.2.1 From 165b1b8bbc17c9469b053bab78b11b7cbce6d161 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Fri, 29 Mar 2013 16:30:07 +0530 Subject: virtio: console: rename cvq_lock to c_ivq_lock The cvq_lock was taken for the c_ivq. Rename the lock to make that obvious. We'll also add a lock around the c_ovq in the next commit, so there's no ambiguity. Signed-off-by: Amit Shah Reviewed-by: Asias He Reviewed-by: Wanlong Gao Signed-off-by: Rusty Russell Cc: stable@kernel.org --- drivers/char/virtio_console.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index e6ba6b7887e9..2dd9134faa27 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -149,7 +149,7 @@ struct ports_device { spinlock_t ports_lock; /* To protect the vq operations for the control channel */ - spinlock_t cvq_lock; + spinlock_t c_ivq_lock; /* The current config space is stored here */ struct virtio_console_config config; @@ -1709,23 +1709,23 @@ static void control_work_handler(struct work_struct *work) portdev = container_of(work, struct ports_device, control_work); vq = portdev->c_ivq; - spin_lock(&portdev->cvq_lock); + spin_lock(&portdev->c_ivq_lock); while ((buf = virtqueue_get_buf(vq, &len))) { - spin_unlock(&portdev->cvq_lock); + spin_unlock(&portdev->c_ivq_lock); buf->len = len; buf->offset = 0; handle_control_message(portdev, buf); - spin_lock(&portdev->cvq_lock); + spin_lock(&portdev->c_ivq_lock); if (add_inbuf(portdev->c_ivq, buf) < 0) { dev_warn(&portdev->vdev->dev, "Error adding buffer to queue\n"); free_buf(buf, false); } } - spin_unlock(&portdev->cvq_lock); + spin_unlock(&portdev->c_ivq_lock); } static void out_intr(struct virtqueue *vq) @@ -1996,10 +1996,11 @@ static int virtcons_probe(struct virtio_device *vdev) if (multiport) { unsigned int nr_added_bufs; - spin_lock_init(&portdev->cvq_lock); + spin_lock_init(&portdev->c_ivq_lock); INIT_WORK(&portdev->control_work, &control_work_handler); - nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock); + nr_added_bufs = fill_queue(portdev->c_ivq, + &portdev->c_ivq_lock); if (!nr_added_bufs) { dev_err(&vdev->dev, "Error allocating buffers for control queue\n"); @@ -2150,7 +2151,7 @@ static int virtcons_restore(struct virtio_device *vdev) return ret; if (use_multiport(portdev)) - fill_queue(portdev->c_ivq, &portdev->cvq_lock); + fill_queue(portdev->c_ivq, &portdev->c_ivq_lock); list_for_each_entry(port, &portdev->ports, list) { port->in_vq = portdev->in_vqs[port->id]; -- cgit v1.2.1 From 9ba5c80b1aea8648a3efe5f22dc1f7cacdfbeeb8 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Fri, 29 Mar 2013 16:30:08 +0530 Subject: virtio: console: add locking around c_ovq operations When multiple ovq operations are being performed (lots of open/close operations on virtio_console fds), the __send_control_msg() function can get confused without locking. A simple recipe to cause badness is: * create a QEMU VM with two virtio-serial ports * in the guest, do while true;do echo abc >/dev/vport0p1;done while true;do echo edf >/dev/vport0p2;done In one run, this caused a panic in __send_control_msg(). In another, I got virtio_console virtio0: control-o:id 0 is not a head! This also results repeated messages similar to these on the host: qemu-kvm: virtio-serial-bus: Unexpected port id 478762112 for device virtio-serial-bus.0 qemu-kvm: virtio-serial-bus: Unexpected port id 478762368 for device virtio-serial-bus.0 Reported-by: FuXiangChun Signed-off-by: Amit Shah Reviewed-by: Wanlong Gao Reviewed-by: Asias He Signed-off-by: Rusty Russell Cc: stable@kernel.org --- drivers/char/virtio_console.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 2dd9134faa27..ce5f3fc25d6d 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -150,6 +150,7 @@ struct ports_device { /* To protect the vq operations for the control channel */ spinlock_t c_ivq_lock; + spinlock_t c_ovq_lock; /* The current config space is stored here */ struct virtio_console_config config; @@ -569,11 +570,14 @@ static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id, vq = portdev->c_ovq; sg_init_one(sg, &cpkt, sizeof(cpkt)); + + spin_lock(&portdev->c_ovq_lock); if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) == 0) { virtqueue_kick(vq); while (!virtqueue_get_buf(vq, &len)) cpu_relax(); } + spin_unlock(&portdev->c_ovq_lock); return 0; } @@ -1997,6 +2001,7 @@ static int virtcons_probe(struct virtio_device *vdev) unsigned int nr_added_bufs; spin_lock_init(&portdev->c_ivq_lock); + spin_lock_init(&portdev->c_ovq_lock); INIT_WORK(&portdev->control_work, &control_work_handler); nr_added_bufs = fill_queue(portdev->c_ivq, -- cgit v1.2.1 From a3d9052c6296ad3398d3ad649c3c682c3e7ecfa6 Mon Sep 17 00:00:00 2001 From: Mac Lin Date: Mon, 25 Mar 2013 17:23:33 +0800 Subject: ARM: cns3xxx: fix mapping of private memory region Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), the Cavium CNS3xxx cannot boot anymore. This is caused by the pre-defined iotable mappings is not in the vmalloc region. This patch move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region. Signed-off-by: Mac Lin Signed-off-by: Anton Vorontsov Cc: stable@vger.kernel.org [v3.3+] --- arch/arm/mach-cns3xxx/core.c | 16 +++------------- arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 16 ++++++++-------- 2 files changed, 11 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index e698f26cc0cb..52e4bb5cf12d 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -22,19 +22,9 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { { - .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE), - .length = SZ_4K, + .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE), + .length = SZ_8K, .type = MT_DEVICE, }, { .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT, diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h index 191c8e57f289..b1021aafa481 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -94,10 +94,10 @@ #define RTC_INTR_STS_OFFSET 0x34 #define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */ -#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */ +#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */ #define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */ -#define CNS3XXX_PM_BASE_VIRT 0xFFF08000 +#define CNS3XXX_PM_BASE_VIRT 0xFB001000 #define PM_CLK_GATE_OFFSET 0x00 #define PM_SOFT_RST_OFFSET 0x04 @@ -109,7 +109,7 @@ #define PM_PLL_HM_PD_OFFSET 0x1C #define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */ -#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000 +#define CNS3XXX_UART0_BASE_VIRT 0xFB002000 #define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ #define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 @@ -130,7 +130,7 @@ #define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 #define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ -#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800 +#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000 #define TIMER1_COUNTER_OFFSET 0x00 #define TIMER1_AUTO_RELOAD_OFFSET 0x04 @@ -227,16 +227,16 @@ * Testchip peripheral and fpga gic regions */ #define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */ -#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000 +#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000 #define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */ -#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100 +#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100) #define CNS3XXX_TC11MP_TWD_BASE 0x90000600 -#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600 +#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600) #define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */ -#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000 +#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000) #define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ #define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 -- cgit v1.2.1 From 90e0970f8788cef2c8f5183af5a98f4f94600faf Mon Sep 17 00:00:00 2001 From: Artem Savkov Date: Sat, 30 Mar 2013 21:20:14 +0400 Subject: cfg80211: sched_scan_mtx lock in cfg80211_conn_work() Introduced in f9f475292dbb0e7035fb6661d1524761ea0888d9 ("cfg80211: always check for scan end on P2P device") cfg80211_conn_scan() which requires sched_scan_mtx to be held can be called from cfg80211_conn_work(). Without this we are hitting multiple warnings like the following: WARNING: at net/wireless/sme.c:88 cfg80211_conn_scan+0x1dc/0x3a0 [cfg80211]() Hardware name: 0578A21 Modules linked in: ... Pid: 620, comm: kworker/3:1 Not tainted 3.9.0-rc4-next-20130328+ #326 Call Trace: [] warn_slowpath_common+0x72/0xa0 [] warn_slowpath_null+0x22/0x30 [] cfg80211_conn_scan+0x1dc/0x3a0 [cfg80211] [] cfg80211_conn_do_work+0x94/0x380 [cfg80211] [] cfg80211_conn_work+0xa2/0x130 [cfg80211] [] process_one_work+0x198/0x450 Signed-off-by: Artem Savkov Signed-off-by: Johannes Berg --- net/wireless/sme.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 09d994d192ff..482c70e70127 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -224,6 +224,7 @@ void cfg80211_conn_work(struct work_struct *work) rtnl_lock(); cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); list_for_each_entry(wdev, &rdev->wdev_list, list) { wdev_lock(wdev); @@ -248,6 +249,7 @@ void cfg80211_conn_work(struct work_struct *work) wdev_unlock(wdev); } + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); rtnl_unlock(); -- cgit v1.2.1 From 9593b0b1179c526436f14849a9587fd2aae12040 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 28 Mar 2013 10:39:28 +0100 Subject: NFC: microread: Fix build failure due to a new MEI bus API uuid device_id field is removed and mei_device is renamed mei_cl_device. Signed-off-by: Samuel Ortiz --- drivers/nfc/microread/mei.c | 38 +++++++++++++++++--------------------- 1 file changed, 17 insertions(+), 21 deletions(-) diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index eef38cfd812e..ca33ae193935 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include @@ -32,9 +32,6 @@ #define MICROREAD_DRIVER_NAME "microread" -#define MICROREAD_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, \ - 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) - struct mei_nfc_hdr { u8 cmd; u8 status; @@ -48,7 +45,7 @@ struct mei_nfc_hdr { #define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD) struct microread_mei_phy { - struct mei_device *mei_device; + struct mei_cl_device *device; struct nfc_hci_dev *hdev; int powered; @@ -105,14 +102,14 @@ static int microread_mei_write(void *phy_id, struct sk_buff *skb) MEI_DUMP_SKB_OUT("mei frame sent", skb); - r = mei_send(phy->device, skb->data, skb->len); + r = mei_cl_send(phy->device, skb->data, skb->len); if (r > 0) r = 0; return r; } -static void microread_event_cb(struct mei_device *device, u32 events, +static void microread_event_cb(struct mei_cl_device *device, u32 events, void *context) { struct microread_mei_phy *phy = context; @@ -120,7 +117,7 @@ static void microread_event_cb(struct mei_device *device, u32 events, if (phy->hard_fault != 0) return; - if (events & BIT(MEI_EVENT_RX)) { + if (events & BIT(MEI_CL_EVENT_RX)) { struct sk_buff *skb; int reply_size; @@ -128,7 +125,7 @@ static void microread_event_cb(struct mei_device *device, u32 events, if (!skb) return; - reply_size = mei_recv(device, skb->data, MEI_NFC_MAX_READ); + reply_size = mei_cl_recv(device, skb->data, MEI_NFC_MAX_READ); if (reply_size < MEI_NFC_HEADER_SIZE) { kfree(skb); return; @@ -149,8 +146,8 @@ static struct nfc_phy_ops mei_phy_ops = { .disable = microread_mei_disable, }; -static int microread_mei_probe(struct mei_device *device, - const struct mei_id *id) +static int microread_mei_probe(struct mei_cl_device *device, + const struct mei_cl_device_id *id) { struct microread_mei_phy *phy; int r; @@ -164,9 +161,9 @@ static int microread_mei_probe(struct mei_device *device, } phy->device = device; - mei_set_clientdata(device, phy); + mei_cl_set_drvdata(device, phy); - r = mei_register_event_cb(device, microread_event_cb, phy); + r = mei_cl_register_event_cb(device, microread_event_cb, phy); if (r) { pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); goto err_out; @@ -186,9 +183,9 @@ err_out: return r; } -static int microread_mei_remove(struct mei_device *device) +static int microread_mei_remove(struct mei_cl_device *device) { - struct microread_mei_phy *phy = mei_get_clientdata(device); + struct microread_mei_phy *phy = mei_cl_get_drvdata(device); pr_info("Removing microread\n"); @@ -202,16 +199,15 @@ static int microread_mei_remove(struct mei_device *device) return 0; } -static struct mei_id microread_mei_tbl[] = { - { MICROREAD_DRIVER_NAME, MICROREAD_UUID }, +static struct mei_cl_device_id microread_mei_tbl[] = { + { MICROREAD_DRIVER_NAME }, /* required last entry */ { } }; - MODULE_DEVICE_TABLE(mei, microread_mei_tbl); -static struct mei_driver microread_driver = { +static struct mei_cl_driver microread_driver = { .id_table = microread_mei_tbl, .name = MICROREAD_DRIVER_NAME, @@ -225,7 +221,7 @@ static int microread_mei_init(void) pr_debug(DRIVER_DESC ": %s\n", __func__); - r = mei_driver_register(µread_driver); + r = mei_cl_driver_register(µread_driver); if (r) { pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n"); return r; @@ -236,7 +232,7 @@ static int microread_mei_init(void) static void microread_mei_exit(void) { - mei_driver_unregister(µread_driver); + mei_cl_driver_unregister(µread_driver); } module_init(microread_mei_init); -- cgit v1.2.1 From 1e1b812bbe1069fc8e2e372dca7d5f541c7a8ceb Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 09:50:07 +0000 Subject: sh_eth: fix handling of no LINK signal The code handling the absent LINK signal (or the absent PSR register -- which reflects the state of this signal) is quite naive and has probably never really worked. It's probably enough to say that this code is executed only on the LINK change interrupt (sic!) but even if we actually have the signal and choose to ignore it (it might be connected to PHY's link/activity LED output as on the Renesas BOCK-W board), sh_eth_adjust_link() on which this code relies to update 'mdp->link' gets executed later than the LINK change interrupt where it is checked, and so RX/TX never get enabled via ECMR register. So, ignore the LINK changed interrupt iff LINK signal is absent (or just chosen not to be used) or PSR register is absent, and enable/disable RX/TX directly in sh_eth_adjust_link() in this case. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index bf5e3cf97c4d..1ca8b2b10adc 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1216,10 +1216,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) if (felic_stat & ECSR_LCHNG) { /* Link Changed */ if (mdp->cd->no_psr || mdp->no_ether_link) { - if (mdp->link == PHY_DOWN) - link_stat = 0; - else - link_stat = PHY_ST_LINK; + goto ignore_link; } else { link_stat = (sh_eth_read(ndev, PSR)); if (mdp->ether_link_active_low) @@ -1242,6 +1239,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) } } +ignore_link: if (intr_status & EESR_TWB) { /* Write buck end. unused write back interrupt */ if (intr_status & EESR_TABT) /* Transmit Abort int */ @@ -1392,12 +1390,16 @@ static void sh_eth_adjust_link(struct net_device *ndev) (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; mdp->link = phydev->link; + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_enable(ndev); } } else if (mdp->link) { new_state = 1; mdp->link = PHY_DOWN; mdp->speed = 0; mdp->duplex = -1; + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_disable(ndev); } if (new_state && netif_msg_link(mdp)) -- cgit v1.2.1 From 3893b27345ac0ff13c1b9ec20ad50966b810997e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 09:54:20 +0000 Subject: sh_eth: workaround for spurious ECI interrupt At least on Renesas R8A7778, EESR.ECI interrupt seems to fire regardless of its mask in EESIPR register. I can 100% reproduce it with the following scenario: target is booted with 'ip=on' option, and so IP-Config opens SoC Ether device but doesn't get a proper reply and then succeeds with on-board SMC chip; then I login and try to bring up the SoC Ether device with 'ifconfig', and I get an ECI interrupt once request_irq() is called by sh_eth_open() (while interrupt mask in EESIPR register is all 0), if that interrupt is accompanied by a pending EESR.FRC (frame receive completion) interrupt, I get kernel oops in sh_eth_rx() because sh_eth_ring_init() hasn't been called yet! The solution I worked out is the following: in sh_eth_interrupt(), mask the interrupt status from EESR register with the interrupt mask from EESIPR register in order not to handle the disabled interrupts -- but forcing EESIPR.M_ECI bit in this mask set because we always need to fully handle EESR.ECI interrupt in sh_eth_error() in order to quench it (as it doesn't get cleared by just writing 1 to the this bit as all the other interrupts). While at it, remove unneeded initializer for 'intr_status' variable and give it *unsigned long* type, matching the type of sh_eth_read()'s result; fix comment. Signed-off-by: Sergei Shtylyov Reviewed-by: Max Filippov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 1ca8b2b10adc..44f7904e5054 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1324,12 +1324,18 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_cpu_data *cd = mdp->cd; irqreturn_t ret = IRQ_NONE; - u32 intr_status = 0; + unsigned long intr_status; spin_lock(&mdp->lock); - /* Get interrpt stat */ + /* Get interrupt status */ intr_status = sh_eth_read(ndev, EESR); + /* Mask it with the interrupt mask, forcing ECI interrupt to be always + * enabled since it's the one that comes thru regardless of the mask, + * and we need to fully handle it in sh_eth_error() in order to quench + * it as it doesn't get cleared by just writing 1 to the ECI bit... + */ + intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI; /* Clear interrupt */ if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF | EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF | -- cgit v1.2.1 From 3340d2aae3433ad9147f6bf0adc452b324e31591 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 10:11:04 +0000 Subject: sh_eth: make 'link' field of 'struct sh_eth_private' *int* The 'link' field of 'struct sh_eth_private' has type 'enum phy_state' while the 'link' field of 'struct phy_device' is merely *int* (having values 0 and 1) and the former field gets assigned from the latter. Make the field match, getting rid of incorrectly used PHY_DOWN value in assignments/comparisons. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 8 ++++---- drivers/net/ethernet/renesas/sh_eth.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 44f7904e5054..6ed333fe5c04 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1377,7 +1377,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) struct phy_device *phydev = mdp->phydev; int new_state = 0; - if (phydev->link != PHY_DOWN) { + if (phydev->link) { if (phydev->duplex != mdp->duplex) { new_state = 1; mdp->duplex = phydev->duplex; @@ -1391,7 +1391,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) if (mdp->cd->set_rate) mdp->cd->set_rate(ndev); } - if (mdp->link == PHY_DOWN) { + if (!mdp->link) { sh_eth_write(ndev, (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; @@ -1401,7 +1401,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) } } else if (mdp->link) { new_state = 1; - mdp->link = PHY_DOWN; + mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; if (mdp->cd->no_psr || mdp->no_ether_link) @@ -1422,7 +1422,7 @@ static int sh_eth_phy_init(struct net_device *ndev) snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, mdp->mii_bus->id , mdp->phy_id); - mdp->link = PHY_DOWN; + mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index e6655678458e..828be4515008 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -723,7 +723,7 @@ struct sh_eth_private { u32 phy_id; /* PHY ID */ struct mii_bus *mii_bus; /* MDIO bus control */ struct phy_device *phydev; /* PHY device control */ - enum phy_state link; + int link; phy_interface_t phy_interface; int msg_enable; int speed; -- cgit v1.2.1 From 6741f40d198c6a5feb23653a1efd4ca47f93d83d Mon Sep 17 00:00:00 2001 From: Joseph CHANG Date: Thu, 28 Mar 2013 23:13:42 +0000 Subject: DM9000B: driver initialization upgrade Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by: Joseph CHANG Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 214 +++++++++++++++++----------------- drivers/net/ethernet/davicom/dm9000.h | 11 +- 2 files changed, 120 insertions(+), 105 deletions(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 8cdf02503d13..9eada8e86078 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -257,6 +257,107 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count) tmp = readl(reg); } +/* + * Sleep, either by using msleep() or if we are suspending, then + * use mdelay() to sleep. + */ +static void dm9000_msleep(board_info_t *db, unsigned int ms) +{ + if (db->in_suspend) + mdelay(ms); + else + msleep(ms); +} + +/* Read a word from phyxcer */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned int reg_save; + int ret; + + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Issue phyxcer read command */ + iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait read complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + mutex_unlock(&db->addr_lock); + + dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); + return ret; +} + +/* Write a word to phyxcer */ +static void +dm9000_phy_write(struct net_device *dev, + int phyaddr_unused, int reg, int value) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned long reg_save; + + dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, value); + iow(db, DM9000_EPDRH, value >> 8); + + /* Issue phyxcer write command */ + iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait write complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + + spin_unlock_irqrestore(&db->lock, flags); + mutex_unlock(&db->addr_lock); +} + /* dm9000_set_io * * select the specified set of io routines to use with the @@ -795,6 +896,9 @@ dm9000_init_dm9000(struct net_device *dev) iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */ + ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; /* if wol is needed, then always set NCR_WAKEEN otherwise we end @@ -1201,109 +1305,6 @@ dm9000_open(struct net_device *dev) return 0; } -/* - * Sleep, either by using msleep() or if we are suspending, then - * use mdelay() to sleep. - */ -static void dm9000_msleep(board_info_t *db, unsigned int ms) -{ - if (db->in_suspend) - mdelay(ms); - else - msleep(ms); -} - -/* - * Read a word from phyxcer - */ -static int -dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned int reg_save; - int ret; - - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - dm9000_msleep(db, 1); /* Wait read complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ - - /* The read data keeps on REG_0D & REG_0E */ - ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - mutex_unlock(&db->addr_lock); - - dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); - return ret; -} - -/* - * Write a word to phyxcer - */ -static void -dm9000_phy_write(struct net_device *dev, - int phyaddr_unused, int reg, int value) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned long reg_save; - - dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - /* Fill the written data into REG_0D & REG_0E */ - iow(db, DM9000_EPDRL, value); - iow(db, DM9000_EPDRH, value >> 8); - - iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock, flags); - - dm9000_msleep(db, 1); /* Wait write complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - - spin_unlock_irqrestore(&db->lock, flags); - mutex_unlock(&db->addr_lock); -} - static void dm9000_shutdown(struct net_device *dev) { @@ -1502,7 +1503,12 @@ dm9000_probe(struct platform_device *pdev) db->flags |= DM9000_PLATF_SIMPLE_PHY; #endif - dm9000_reset(db); + /* Fixing bug on dm9000_probe, takeover dm9000_reset(db), + * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo + * while probe stage. + */ + + iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST); /* try multiple times, DM9000 sometimes gets the read wrong */ for (i = 0; i < 8; i++) { diff --git a/drivers/net/ethernet/davicom/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h index 55688bd1a3ef..9ce058adabab 100644 --- a/drivers/net/ethernet/davicom/dm9000.h +++ b/drivers/net/ethernet/davicom/dm9000.h @@ -69,7 +69,9 @@ #define NCR_WAKEEN (1<<6) #define NCR_FCOL (1<<4) #define NCR_FDX (1<<3) -#define NCR_LBK (3<<1) + +#define NCR_RESERVED (3<<1) +#define NCR_MAC_LBK (1<<1) #define NCR_RST (1<<0) #define NSR_SPEED (1<<7) @@ -167,5 +169,12 @@ #define ISR_LNKCHNG (1<<5) #define ISR_UNDERRUN (1<<4) +/* Davicom MII registers. + */ + +#define MII_DM_DSPCR 0x1b /* DSP Control Register */ + +#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */ + #endif /* _DM9000X_H_ */ -- cgit v1.2.1 From 375981f2e14868be16cafbffd34a4f16a6ee01c6 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Wed, 13 Mar 2013 12:13:30 +0530 Subject: spi/s3c64xx: modified error interrupt handling and init The status of the interrupt is available in the status register, so reading the clear pending register and writing back the same value will not actually clear the pending interrupts. This patch modifies the interrupt handler to read the status register and clear the corresponding pending bit in the clear pending register. Modified the hwInit function to clear all the pending interrupts. Signed-off-by: Girish K S Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-s3c64xx.c | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index e862ab8853aa..4188b2faac5c 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -994,25 +994,30 @@ static irqreturn_t s3c64xx_spi_irq(int irq, void *data) { struct s3c64xx_spi_driver_data *sdd = data; struct spi_master *spi = sdd->master; - unsigned int val; + unsigned int val, clr = 0; - val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR); + val = readl(sdd->regs + S3C64XX_SPI_STATUS); - val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR | - S3C64XX_SPI_PND_RX_UNDERRUN_CLR | - S3C64XX_SPI_PND_TX_OVERRUN_CLR | - S3C64XX_SPI_PND_TX_UNDERRUN_CLR; - - writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR); - - if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR) + if (val & S3C64XX_SPI_ST_RX_OVERRUN_ERR) { + clr = S3C64XX_SPI_PND_RX_OVERRUN_CLR; dev_err(&spi->dev, "RX overrun\n"); - if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR) + } + if (val & S3C64XX_SPI_ST_RX_UNDERRUN_ERR) { + clr |= S3C64XX_SPI_PND_RX_UNDERRUN_CLR; dev_err(&spi->dev, "RX underrun\n"); - if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR) + } + if (val & S3C64XX_SPI_ST_TX_OVERRUN_ERR) { + clr |= S3C64XX_SPI_PND_TX_OVERRUN_CLR; dev_err(&spi->dev, "TX overrun\n"); - if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR) + } + if (val & S3C64XX_SPI_ST_TX_UNDERRUN_ERR) { + clr |= S3C64XX_SPI_PND_TX_UNDERRUN_CLR; dev_err(&spi->dev, "TX underrun\n"); + } + + /* Clear the pending irq by setting and then clearing it */ + writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR); + writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR); return IRQ_HANDLED; } @@ -1036,9 +1041,13 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) writel(0, regs + S3C64XX_SPI_MODE_CFG); writel(0, regs + S3C64XX_SPI_PACKET_CNT); - /* Clear any irq pending bits */ - writel(readl(regs + S3C64XX_SPI_PENDING_CLR), - regs + S3C64XX_SPI_PENDING_CLR); + /* Clear any irq pending bits, should set and clear the bits */ + val = S3C64XX_SPI_PND_RX_OVERRUN_CLR | + S3C64XX_SPI_PND_RX_UNDERRUN_CLR | + S3C64XX_SPI_PND_TX_OVERRUN_CLR | + S3C64XX_SPI_PND_TX_UNDERRUN_CLR; + writel(val, regs + S3C64XX_SPI_PENDING_CLR); + writel(0, regs + S3C64XX_SPI_PENDING_CLR); writel(0, regs + S3C64XX_SPI_SWAP_CFG); -- cgit v1.2.1 From b0b36b861e434ee1c1a64cb39259e262f79af62e Mon Sep 17 00:00:00 2001 From: Bryan Freed Date: Wed, 13 Mar 2013 11:17:40 -0700 Subject: spi: Unlock a spinlock before calling into the controller driver. spi_pump_messages() calls into a controller driver with unprepare_transfer_hardware() which is documented as "This may sleep". As in the prepare_transfer_hardware() call below, we should release the queue_lock spinlock before making the call. Rework the logic a bit to hold queue_lock to protect the 'busy' flag, then release it to call unprepare_transfer_hardware(). Signed-off-by: Bryan Freed Reviewed-by: Doug Anderson Signed-off-by: Doug Anderson Acked-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/spi/spi.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index f996c600eb8c..5b96250b0628 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -543,17 +543,16 @@ static void spi_pump_messages(struct kthread_work *work) /* Lock queue and check for queue work */ spin_lock_irqsave(&master->queue_lock, flags); if (list_empty(&master->queue) || !master->running) { - if (master->busy && master->unprepare_transfer_hardware) { - ret = master->unprepare_transfer_hardware(master); - if (ret) { - spin_unlock_irqrestore(&master->queue_lock, flags); - dev_err(&master->dev, - "failed to unprepare transfer hardware\n"); - return; - } + if (!master->busy) { + spin_unlock_irqrestore(&master->queue_lock, flags); + return; } master->busy = false; spin_unlock_irqrestore(&master->queue_lock, flags); + if (master->unprepare_transfer_hardware && + master->unprepare_transfer_hardware(master)) + dev_err(&master->dev, + "failed to unprepare transfer hardware\n"); return; } -- cgit v1.2.1 From 1ad849aee5f53353ed88d9cd3d68a51b03a7d44f Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Wed, 13 Mar 2013 14:57:43 +0100 Subject: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts Some SPI slave devices require asserted chip select signal across multiple transfer segments of an SPI message. Currently the driver always de-asserts the internal SS signal for every single transfer segment of the message and ignores the 'cs_change' flag of the transfer description. Disable the internal chip select (SS) only if this is needed and indicated by the 'cs_change' flag. Without this change, each partial transfer of a surrounding multi-part SPI transaction might erroneously change the SS signal, which might prevent slaves from answering the request that was sent in a previous transfer segment because the transaction could be considered aborted (SS was de-asserted before reading the response). Reported-by: Gerhard Sittig Signed-off-by: Anatolij Gustschin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-mpc512x-psc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index 89480b281d74..3e490ee7f275 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -164,7 +164,7 @@ static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi, for (i = count; i > 0; i--) { data = tx_buf ? *tx_buf++ : 0; - if (len == EOFBYTE) + if (len == EOFBYTE && t->cs_change) setbits32(&fifo->txcmd, MPC512x_PSC_FIFO_EOF); out_8(&fifo->txdata_8, data); len--; -- cgit v1.2.1 From 8f08d6667287241f6818d35e02b223fb5df97cf1 Mon Sep 17 00:00:00 2001 From: Nigel Roberts Date: Mon, 1 Apr 2013 23:03:22 +1100 Subject: ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED In the conversion to pinctrl, an error in the pins for the rebuild LED was introduced. This patch assigns the correct pins and includes the correct name for the LED in kirkwood-iomega_ix2_200.dts. Signed-off-by: Nigel Roberts Cc: # v3.8.x Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 93c3afbef9ee..3694e94f6e99 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -96,11 +96,11 @@ marvell,function = "gpio"; }; pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 { - marvell,pins = "mpp44"; + marvell,pins = "mpp46"; marvell,function = "gpio"; }; pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 { - marvell,pins = "mpp45"; + marvell,pins = "mpp47"; marvell,function = "gpio"; }; @@ -157,14 +157,14 @@ gpios = <&gpio0 16 0>; linux,default-trigger = "default-on"; }; - health_led1 { + rebuild_led { + label = "status:white:rebuild_led"; + gpios = <&gpio1 4 0>; + }; + health_led { label = "status:red:health_led"; gpios = <&gpio1 5 0>; }; - health_led2 { - label = "status:white:health_led"; - gpios = <&gpio1 4 0>; - }; backup_led { label = "status:blue:backup_led"; gpios = <&gpio0 15 0>; -- cgit v1.2.1 From 2cfda637e29ce9e3df31b59f64516b2e571cc985 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 1 Apr 2013 11:48:59 -0600 Subject: EISA/PCI: Fix bus res reference Matthew found that 3.8.3 is having problems with an old (ancient) PCI-to-EISA bridge, the Intel 82375. It worked with the 3.2 kernel. He identified the 82375, but doesn't assign the struct resource *res pointer inside the struct eisa_root_device, and panics. pci_eisa_init() was using bus->resource[] directly instead of pci_bus_resource_n(). The bus->resource[] array is a PCI-internal implementation detail, and after commit 45ca9e97 (PCI: add helpers for building PCI bus resource lists) and commit 0efd5aab (PCI: add struct pci_host_bridge_window with CPU/bus address offset), bus->resource[] is not used for PCI root buses any more. The 82375 is a subtractive-decode PCI device, so handle it the same way we handle PCI-PCI bridges in subtractive-decode mode in pci_read_bridge_bases(). [bhelgaas: changelog] Reported-by: Matthew Whitehead Tested-by: Matthew Whitehead Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # v3.3+ --- drivers/eisa/pci_eisa.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c index cdae207028a7..ef5c3ec87432 100644 --- a/drivers/eisa/pci_eisa.c +++ b/drivers/eisa/pci_eisa.c @@ -22,7 +22,8 @@ static struct eisa_root_device pci_eisa_root; static int __init pci_eisa_init(struct pci_dev *pdev, const struct pci_device_id *ent) { - int rc; + int rc, i; + struct resource *res, *bus_res = NULL; if ((rc = pci_enable_device (pdev))) { printk (KERN_ERR "pci_eisa : Could not enable device %s\n", @@ -30,9 +31,30 @@ static int __init pci_eisa_init(struct pci_dev *pdev, return rc; } + /* + * The Intel 82375 PCI-EISA bridge is a subtractive-decode PCI + * device, so the resources available on EISA are the same as those + * available on the 82375 bus. This works the same as a PCI-PCI + * bridge in subtractive-decode mode (see pci_read_bridge_bases()). + * We assume other PCI-EISA bridges are similar. + * + * eisa_root_register() can only deal with a single io port resource, + * so we use the first valid io port resource. + */ + pci_bus_for_each_resource(pdev->bus, res, i) + if (res && (res->flags & IORESOURCE_IO)) { + bus_res = res; + break; + } + + if (!bus_res) { + dev_err(&pdev->dev, "No resources available\n"); + return -1; + } + pci_eisa_root.dev = &pdev->dev; - pci_eisa_root.res = pdev->bus->resource[0]; - pci_eisa_root.bus_base_addr = pdev->bus->resource[0]->start; + pci_eisa_root.res = bus_res; + pci_eisa_root.bus_base_addr = bus_res->start; pci_eisa_root.slots = EISA_MAX_SLOTS; pci_eisa_root.dma_mask = pdev->dma_mask; dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root); -- cgit v1.2.1 From c5fb301ae83bec6892e54984e6ec765c47df8e10 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 27 Mar 2013 21:28:05 -0700 Subject: EISA/PCI: Init EISA early, before PNP Matthew reported kernels fail the pci_eisa probe and are later successful with the virtual_eisa_root_init force probe without slot0. The reason for that is: PNP probing is before pci_eisa_init gets called as pci_eisa_init is called via pci_driver. pnp 00:0f has 0xc80 - 0xc84 reserved. [ 9.700409] pnp 00:0f: [io 0x0c80-0x0c84] so eisa_probe will fail from pci_eisa_init ==>eisa_root_register ==>eisa_probe path. as force_probe is not set in pci_eisa_root, it will bail early when slot0 is not probed and initialized. Try to use subsys_initcall_sync instead, and will keep following sequence: pci_subsys_init pci_eisa_init_early pnpacpi_init/isapnp_init After this patch EISA can be initialized properly, and PNP overlapping resource will not be reserved. [ 10.104434] system 00:0f: [io 0x0c80-0x0c84] could not be reserved Reported-by: Matthew Whitehead Tested-by: Matthew Whitehead Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org --- drivers/eisa/pci_eisa.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c index ef5c3ec87432..6c3fca97d346 100644 --- a/drivers/eisa/pci_eisa.c +++ b/drivers/eisa/pci_eisa.c @@ -19,8 +19,7 @@ /* There is only *one* pci_eisa device per machine, right ? */ static struct eisa_root_device pci_eisa_root; -static int __init pci_eisa_init(struct pci_dev *pdev, - const struct pci_device_id *ent) +static int __init pci_eisa_init(struct pci_dev *pdev) { int rc, i; struct resource *res, *bus_res = NULL; @@ -67,22 +66,26 @@ static int __init pci_eisa_init(struct pci_dev *pdev, return 0; } -static struct pci_device_id pci_eisa_pci_tbl[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 }, - { 0, } -}; +/* + * We have to call pci_eisa_init_early() before pnpacpi_init()/isapnp_init(). + * Otherwise pnp resource will get enabled early and could prevent eisa + * to be initialized. + * Also need to make sure pci_eisa_init_early() is called after + * x86/pci_subsys_init(). + * So need to use subsys_initcall_sync with it. + */ +static int __init pci_eisa_init_early(void) +{ + struct pci_dev *dev = NULL; + int ret; -static struct pci_driver __refdata pci_eisa_driver = { - .name = "pci_eisa", - .id_table = pci_eisa_pci_tbl, - .probe = pci_eisa_init, -}; + for_each_pci_dev(dev) + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_EISA) { + ret = pci_eisa_init(dev); + if (ret) + return ret; + } -static int __init pci_eisa_init_module (void) -{ - return pci_register_driver (&pci_eisa_driver); + return 0; } - -device_initcall(pci_eisa_init_module); -MODULE_DEVICE_TABLE(pci, pci_eisa_pci_tbl); +subsys_initcall_sync(pci_eisa_init_early); -- cgit v1.2.1 From 0f1bc12e9eddaba2baf52d020d37670dbabe3702 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 14 Mar 2013 16:27:05 +0100 Subject: clk: tegra: Allow PLLE training to succeed Under some circumstances the PLLE needs to be retrained, in which case access to the PMC registers is required. Fix this by passing a pointer to the PMC registers instead of NULL when registering the PLLE clock. Signed-off-by: Thierry Reding Acked-By: Peter De Schrijver Signed-off-by: Mike Turquette --- drivers/clk/tegra/clk-tegra20.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 1e2de7305362..f873dcefe0de 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -703,7 +703,7 @@ static void tegra20_pll_init(void) clks[pll_a_out0] = clk; /* PLLE */ - clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, NULL, + clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, pmc_base, 0, 100000000, &pll_e_params, 0, pll_e_freq_table, NULL); clk_register_clkdev(clk, "pll_e", NULL); -- cgit v1.2.1 From 901ceba4e81e9dd6b4a3c4c37ee22000a6c5c65f Mon Sep 17 00:00:00 2001 From: Stone Piao Date: Fri, 29 Mar 2013 19:21:21 -0700 Subject: mwifiex: limit channel number not to overflow memory Limit the channel number in scan request, or the driver scan config structure memory will be overflowed. Cc: # 3.5+ Signed-off-by: Stone Piao Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a44023a7bd57..8aaf56ade4d9 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1892,7 +1892,8 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, } } - for (i = 0; i < request->n_channels; i++) { + for (i = 0; i < min_t(u32, request->n_channels, + MWIFIEX_USER_SCAN_CHAN_MAX); i++) { chan = request->channels[i]; priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value; priv->user_scan_cfg->chan_list[i].radio_type = chan->band; -- cgit v1.2.1 From 121cdf08cc854bda4892d2c755e32ef424772ac2 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 26 Mar 2013 17:25:55 -0400 Subject: nouveau: Attempt to use platform-provided ROM image Some platforms only provide their PCI ROM via a platform-specific interface. Fall back to attempting that if all other sources fail. Signed-off-by: Matthew Garrett Signed-off-by: Bjorn Helgaas --- drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c index e816f06637a7..0e2c1a4f1659 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c @@ -248,6 +248,22 @@ nouveau_bios_shadow_pci(struct nouveau_bios *bios) } } +static void +nouveau_bios_shadow_platform(struct nouveau_bios *bios) +{ + struct pci_dev *pdev = nv_device(bios)->pdev; + size_t size; + + void __iomem *rom = pci_platform_rom(pdev, &size); + if (rom && size) { + bios->data = kmalloc(size, GFP_KERNEL); + if (bios->data) { + memcpy_fromio(bios->data, rom, size); + bios->size = size; + } + } +} + static int nouveau_bios_score(struct nouveau_bios *bios, const bool writeable) { @@ -288,6 +304,7 @@ nouveau_bios_shadow(struct nouveau_bios *bios) { "PROM", nouveau_bios_shadow_prom, false, 0, 0, NULL }, { "ACPI", nouveau_bios_shadow_acpi, true, 0, 0, NULL }, { "PCIROM", nouveau_bios_shadow_pci, true, 0, 0, NULL }, + { "PLATFORM", nouveau_bios_shadow_platform, true, 0, 0, NULL }, {} }; struct methods *mthd, *best; -- cgit v1.2.1 From 06a08570085b3b20c45f45dc66dc46851ecbcb5b Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 26 Mar 2013 17:25:56 -0400 Subject: radeon: Attempt to use platform-provided ROM image Some platforms only provide their PCI ROM via a platform-specific interface. Fall back to attempting that if all other sources fail. Signed-off-by: Matthew Garrett Signed-off-by: Bjorn Helgaas --- drivers/gpu/drm/radeon/radeon_bios.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index b8015913d382..fa3c56fba294 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -99,6 +99,29 @@ static bool radeon_read_bios(struct radeon_device *rdev) return true; } +static bool radeon_read_platform_bios(struct radeon_device *rdev) +{ + uint8_t __iomem *bios; + size_t size; + + rdev->bios = NULL; + + bios = pci_platform_rom(rdev->pdev, &size); + if (!bios) { + return false; + } + + if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) { + return false; + } + rdev->bios = kmemdup(bios, size, GFP_KERNEL); + if (rdev->bios == NULL) { + return false; + } + + return true; +} + #ifdef CONFIG_ACPI /* ATRM is used to get the BIOS on the discrete cards in * dual-gpu systems. @@ -620,6 +643,9 @@ bool radeon_get_bios(struct radeon_device *rdev) if (r == false) { r = radeon_read_disabled_bios(rdev); } + if (r == false) { + r = radeon_read_platform_bios(rdev); + } if (r == false || rdev->bios == NULL) { DRM_ERROR("Unable to locate a BIOS ROM\n"); rdev->bios = NULL; -- cgit v1.2.1 From c1681bf8a7b1b98edee8b862a42c19c4e53205fd Mon Sep 17 00:00:00 2001 From: Anatol Pomozov Date: Mon, 1 Apr 2013 09:47:56 -0700 Subject: loop: prevent bdev freeing while device in use struct block_device lifecycle is defined by its inode (see fs/block_dev.c) - block_device allocated first time we access /dev/loopXX and deallocated on bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile" we want that block_device stay alive until we destroy the loop device with "losetup -d". But because we do not hold /dev/loopXX inode its counter goes 0, and inode/bdev can be destroyed at any moment. Usually it happens at memory pressure or when user drops inode cache (like in the test below). When later in loop_clr_fd() we want to use bdev we have use-after-free error with following stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000280 bd_set_size+0x10/0xa0 loop_clr_fd+0x1f8/0x420 [loop] lo_ioctl+0x200/0x7e0 [loop] lo_compat_ioctl+0x47/0xe0 [loop] compat_blkdev_ioctl+0x341/0x1290 do_filp_open+0x42/0xa0 compat_sys_ioctl+0xc1/0xf20 do_sys_open+0x16e/0x1d0 sysenter_dispatch+0x7/0x1a To prevent use-after-free we need to grab the device in loop_set_fd() and put it later in loop_clr_fd(). The issue is reprodusible on current Linus head and v3.3. Here is the test: dd if=/dev/zero of=loop.file bs=1M count=1 while [ true ]; do losetup /dev/loop0 loop.file echo 2 > /proc/sys/vm/drop_caches losetup -d /dev/loop0 done [ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every time we call loop_set_fd() we check that loop_device->lo_state is Lo_unbound and set it to Lo_bound If somebody will try to set_fd again it will get EBUSY. And if we try to loop_clr_fd() on unbound loop device we'll get ENXIO. loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under loop_device->lo_ctl_mutex. ] Signed-off-by: Anatol Pomozov Cc: Al Viro Signed-off-by: Linus Torvalds --- drivers/block/loop.c | 9 ++++++++- fs/block_dev.c | 1 + 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index fe5f6403417f..2c127f9c3f3b 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -922,6 +922,11 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, lo->lo_flags |= LO_FLAGS_PARTSCAN; if (lo->lo_flags & LO_FLAGS_PARTSCAN) ioctl_by_bdev(bdev, BLKRRPART, 0); + + /* Grab the block_device to prevent its destruction after we + * put /dev/loopXX inode. Later in loop_clr_fd() we bdput(bdev). + */ + bdgrab(bdev); return 0; out_clr: @@ -1031,8 +1036,10 @@ static int loop_clr_fd(struct loop_device *lo) memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE); memset(lo->lo_crypt_name, 0, LO_NAME_SIZE); memset(lo->lo_file_name, 0, LO_NAME_SIZE); - if (bdev) + if (bdev) { + bdput(bdev); invalidate_bdev(bdev); + } set_capacity(lo->lo_disk, 0); loop_sysfs_exit(lo); if (bdev) { diff --git a/fs/block_dev.c b/fs/block_dev.c index aea605c98ba6..aae187a7f94a 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -551,6 +551,7 @@ struct block_device *bdgrab(struct block_device *bdev) ihold(bdev->bd_inode); return bdev; } +EXPORT_SYMBOL(bdgrab); long nr_blockdev_pages(void) { -- cgit v1.2.1 From da259465d7526804b21d274281fb4d60b4216c82 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 2 Apr 2013 01:25:09 +0200 Subject: USB / PM: Don't try to hide PM QoS flags from usb_port_device_release() Remove the call to dev_pm_qos_hide_flags(), added by commit 6e30d7cb "usb: Add driver/usb/core/(port.c,hub.h) files", from usb_port_device_release(), because (1) it is completely unnecessary (the flags have been removed already by the PM core during the unregistration of the device object) and (2) it triggers a NULL pointer dereference in sysfs_find_dirent() (dev->kobj.sd is NULL at this point). Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman --- drivers/usb/core/port.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 797f9d514732..65d4e55552c6 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -67,7 +67,6 @@ static void usb_port_device_release(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); - dev_pm_qos_hide_flags(dev); kfree(port_dev); } -- cgit v1.2.1 From 0f703069296664eb7c649c837cc8bb936c3ef07f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 2 Apr 2013 01:25:24 +0200 Subject: PM / QoS: Avoid possible deadlock related to sysfs access Commit b81ea1b (PM / QoS: Fix concurrency issues and memory leaks in device PM QoS) put calls to pm_qos_sysfs_add_latency(), pm_qos_sysfs_add_flags(), pm_qos_sysfs_remove_latency(), and pm_qos_sysfs_remove_flags() under dev_pm_qos_mtx, which was a mistake, because it may lead to deadlocks in some situations. For example, if pm_qos_remote_wakeup_store() is run in parallel with dev_pm_qos_constraints_destroy(), they may deadlock in the following way: ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0-rc4-next-20130328-sasha-00014-g91a3267 #319 Tainted: G W ------------------------------------------------------- trinity-child6/12371 is trying to acquire lock: (s_active#54){++++.+}, at: [] sysfs_addrm_finish+0x31/0x60 but task is already holding lock: (dev_pm_qos_mtx){+.+.+.}, at: [] dev_pm_qos_constraints_destroy+0x23/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (dev_pm_qos_mtx){+.+.+.}: [] lock_acquire+0x1aa/0x240 [] __mutex_lock_common+0x59/0x5e0 [] mutex_lock_nested+0x3f/0x50 [] dev_pm_qos_update_flags+0x3f/0xc0 [] pm_qos_remote_wakeup_store+0x3f/0x70 [] dev_attr_store+0x13/0x20 [] sysfs_write_file+0xfa/0x150 [] __kernel_write+0x81/0x150 [] write_pipe_buf+0x4d/0x80 [] splice_from_pipe_feed+0x7c/0x120 [] __splice_from_pipe+0x45/0x80 [] splice_from_pipe+0x4c/0x70 [] default_file_splice_write+0x18/0x30 [] do_splice_from+0x83/0xb0 [] direct_splice_actor+0x1e/0x20 [] splice_direct_to_actor+0xe7/0x200 [] do_splice_direct+0x4c/0x70 [] do_sendfile+0x169/0x300 [] SyS_sendfile64+0x64/0xb0 [] tracesys+0xe1/0xe6 -> #0 (s_active#54){++++.+}: [] __lock_acquire+0x15bf/0x1e50 [] lock_acquire+0x1aa/0x240 [] sysfs_deactivate+0x122/0x1a0 [] sysfs_addrm_finish+0x31/0x60 [] sysfs_hash_and_remove+0x7f/0xb0 [] sysfs_unmerge_group+0x51/0x70 [] pm_qos_sysfs_remove_flags+0x14/0x20 [] __dev_pm_qos_hide_flags+0x30/0x70 [] dev_pm_qos_constraints_destroy+0x35/0x250 [] dpm_sysfs_remove+0x11/0x50 [] device_del+0x3f/0x1b0 [] device_unregister+0x48/0x60 [] usb_hub_remove_port_device+0x1c/0x20 [] hub_disconnect+0xdd/0x160 [] usb_unbind_interface+0x67/0x170 [] __device_release_driver+0x87/0xe0 [] device_release_driver+0x29/0x40 [] bus_remove_device+0x148/0x160 [] device_del+0x14f/0x1b0 [] usb_disable_device+0xf9/0x280 [] usb_set_configuration+0x268/0x840 [] usb_remove_store+0x4c/0x80 [] dev_attr_store+0x13/0x20 [] sysfs_write_file+0xfa/0x150 [] do_loop_readv_writev+0x4d/0x90 [] do_readv_writev+0xf9/0x1e0 [] vfs_writev+0x3a/0x60 [] SyS_writev+0x50/0xd0 [] tracesys+0xe1/0xe6 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(dev_pm_qos_mtx); lock(s_active#54); lock(dev_pm_qos_mtx); lock(s_active#54); *** DEADLOCK *** To avoid that, remove the calls to functions mentioned above from under dev_pm_qos_mtx and introduce a separate lock to prevent races between functions that add or remove device PM QoS sysfs attributes from happening. Reported-by: Sasha Levin Signed-off-by: Rafael J. Wysocki --- drivers/base/power/qos.c | 60 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 5f74587ef258..71671c42ef45 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -46,6 +46,7 @@ #include "power.h" static DEFINE_MUTEX(dev_pm_qos_mtx); +static DEFINE_MUTEX(dev_pm_qos_sysfs_mtx); static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers); @@ -216,12 +217,17 @@ void dev_pm_qos_constraints_destroy(struct device *dev) struct pm_qos_constraints *c; struct pm_qos_flags *f; - mutex_lock(&dev_pm_qos_mtx); + mutex_lock(&dev_pm_qos_sysfs_mtx); /* * If the device's PM QoS resume latency limit or PM QoS flags have been * exposed to user space, they have to be hidden at this point. */ + pm_qos_sysfs_remove_latency(dev); + pm_qos_sysfs_remove_flags(dev); + + mutex_lock(&dev_pm_qos_mtx); + __dev_pm_qos_hide_latency_limit(dev); __dev_pm_qos_hide_flags(dev); @@ -254,6 +260,8 @@ void dev_pm_qos_constraints_destroy(struct device *dev) out: mutex_unlock(&dev_pm_qos_mtx); + + mutex_unlock(&dev_pm_qos_sysfs_mtx); } /** @@ -558,6 +566,14 @@ static void __dev_pm_qos_drop_user_request(struct device *dev, kfree(req); } +static void dev_pm_qos_drop_user_request(struct device *dev, + enum dev_pm_qos_req_type type) +{ + mutex_lock(&dev_pm_qos_mtx); + __dev_pm_qos_drop_user_request(dev, type); + mutex_unlock(&dev_pm_qos_mtx); +} + /** * dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space. * @dev: Device whose PM QoS latency limit is to be exposed to user space. @@ -581,6 +597,8 @@ int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value) return ret; } + mutex_lock(&dev_pm_qos_sysfs_mtx); + mutex_lock(&dev_pm_qos_mtx); if (IS_ERR_OR_NULL(dev->power.qos)) @@ -591,26 +609,27 @@ int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value) if (ret < 0) { __dev_pm_qos_remove_request(req); kfree(req); + mutex_unlock(&dev_pm_qos_mtx); goto out; } - dev->power.qos->latency_req = req; + + mutex_unlock(&dev_pm_qos_mtx); + ret = pm_qos_sysfs_add_latency(dev); if (ret) - __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY); + dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY); out: - mutex_unlock(&dev_pm_qos_mtx); + mutex_unlock(&dev_pm_qos_sysfs_mtx); return ret; } EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit); static void __dev_pm_qos_hide_latency_limit(struct device *dev) { - if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req) { - pm_qos_sysfs_remove_latency(dev); + if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req) __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY); - } } /** @@ -619,9 +638,15 @@ static void __dev_pm_qos_hide_latency_limit(struct device *dev) */ void dev_pm_qos_hide_latency_limit(struct device *dev) { + mutex_lock(&dev_pm_qos_sysfs_mtx); + + pm_qos_sysfs_remove_latency(dev); + mutex_lock(&dev_pm_qos_mtx); __dev_pm_qos_hide_latency_limit(dev); mutex_unlock(&dev_pm_qos_mtx); + + mutex_unlock(&dev_pm_qos_sysfs_mtx); } EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit); @@ -649,6 +674,8 @@ int dev_pm_qos_expose_flags(struct device *dev, s32 val) } pm_runtime_get_sync(dev); + mutex_lock(&dev_pm_qos_sysfs_mtx); + mutex_lock(&dev_pm_qos_mtx); if (IS_ERR_OR_NULL(dev->power.qos)) @@ -659,16 +686,19 @@ int dev_pm_qos_expose_flags(struct device *dev, s32 val) if (ret < 0) { __dev_pm_qos_remove_request(req); kfree(req); + mutex_unlock(&dev_pm_qos_mtx); goto out; } - dev->power.qos->flags_req = req; + + mutex_unlock(&dev_pm_qos_mtx); + ret = pm_qos_sysfs_add_flags(dev); if (ret) - __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS); + dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS); out: - mutex_unlock(&dev_pm_qos_mtx); + mutex_unlock(&dev_pm_qos_sysfs_mtx); pm_runtime_put(dev); return ret; } @@ -676,10 +706,8 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_expose_flags); static void __dev_pm_qos_hide_flags(struct device *dev) { - if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req) { - pm_qos_sysfs_remove_flags(dev); + if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req) __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS); - } } /** @@ -689,9 +717,15 @@ static void __dev_pm_qos_hide_flags(struct device *dev) void dev_pm_qos_hide_flags(struct device *dev) { pm_runtime_get_sync(dev); + mutex_lock(&dev_pm_qos_sysfs_mtx); + + pm_qos_sysfs_remove_flags(dev); + mutex_lock(&dev_pm_qos_mtx); __dev_pm_qos_hide_flags(dev); mutex_unlock(&dev_pm_qos_mtx); + + mutex_unlock(&dev_pm_qos_sysfs_mtx); pm_runtime_put(dev); } EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags); -- cgit v1.2.1 From 5faaa035ddc16d3d2e31c0bfc1c4756b6869dbcc Mon Sep 17 00:00:00 2001 From: Rajagopal Venkat Date: Thu, 21 Mar 2013 13:28:25 +0000 Subject: PM / devfreq: Fix compiler warnings for CONFIG_PM_DEVFREQ unset Fix compiler warnings generated when devfreq is not enabled (CONFIG_PM_DEVFREQ is not set). Signed-off-by: Rajagopal Venkat Acked-by: MyungJoo Ham Signed-off-by: Rafael J. Wysocki --- include/linux/devfreq.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index e83ef39b3bea..fe8c4476f7e4 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -213,7 +213,7 @@ struct devfreq_simple_ondemand_data { #endif #else /* !CONFIG_PM_DEVFREQ */ -static struct devfreq *devfreq_add_device(struct device *dev, +static inline struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, const char *governor_name, void *data) @@ -221,34 +221,34 @@ static struct devfreq *devfreq_add_device(struct device *dev, return NULL; } -static int devfreq_remove_device(struct devfreq *devfreq) +static inline int devfreq_remove_device(struct devfreq *devfreq) { return 0; } -static int devfreq_suspend_device(struct devfreq *devfreq) +static inline int devfreq_suspend_device(struct devfreq *devfreq) { return 0; } -static int devfreq_resume_device(struct devfreq *devfreq) +static inline int devfreq_resume_device(struct devfreq *devfreq) { return 0; } -static struct opp *devfreq_recommended_opp(struct device *dev, +static inline struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { - return -EINVAL; + return ERR_PTR(-EINVAL); } -static int devfreq_register_opp_notifier(struct device *dev, +static inline int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq) { return -EINVAL; } -static int devfreq_unregister_opp_notifier(struct device *dev, +static inline int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq) { return -EINVAL; -- cgit v1.2.1 From f5c3ef21db149ba573a3f079df287f3d8b05ee13 Mon Sep 17 00:00:00 2001 From: Paolo Pisati Date: Thu, 28 Mar 2013 09:24:29 +0000 Subject: cpufreq: check OF node /cpus presence before dereferencing it Check for the presence of the '/cpus' OF node before dereferencing it blindly: [ 4.181793] Unable to handle kernel NULL pointer dereference at virtual address 0000001c [ 4.181793] pgd = c0004000 [ 4.181823] [0000001c] *pgd=00000000 [ 4.181823] Internal error: Oops: 5 [#1] SMP ARM [ 4.181823] Modules linked in: [ 4.181823] CPU: 1 Tainted: G W (3.8.0-15-generic #25~hbankD) [ 4.181854] PC is at of_get_next_child+0x64/0x70 [ 4.181854] LR is at of_get_next_child+0x24/0x70 [ 4.181854] pc : [] lr : [] psr: 60000113 [ 4.181854] sp : ed891ec0 ip : ed891ec0 fp : ed891ed4 [ 4.181884] r10: c04dafd0 r9 : c098690c r8 : c0936208 [ 4.181884] r7 : ed890000 r6 : c0a63d00 r5 : 00000000 r4 : 00000000 [ 4.181884] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : c0b2acc8 [ 4.181884] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 4.181884] Control: 10c5387d Table: adcb804a DAC: 00000015 [ 4.181915] Process swapper/0 (pid: 1, stack limit = 0xed890238) [ 4.181915] Stack: (0xed891ec0 to 0xed892000) [ 4.181915] 1ec0: c09b7b70 00000007 ed891efc ed891ed8 c04daff4 c04fd9c0 00000000 c09b7b70 [ 4.181915] 1ee0: 00000007 c0a63d00 ed890000 c0936208 ed891f54 ed891f00 c00088e0 c04dafdc [ 4.181945] 1f00: ed891f54 ed891f10 c006e940 00000000 00000000 00000007 00000007 c08a4914 [ 4.181945] 1f20: 00000000 c07dbd30 c0a63d00 c09b7b70 00000007 c0a63d00 000000bc c0936208 [ 4.181945] 1f40: c098690c c0986914 ed891f94 ed891f58 c0936a40 c00087bc 00000007 00000007 [ 4.181976] 1f60: c0936208 be8bda20 b6eea010 c0a63d00 c064547c 00000000 00000000 00000000 [ 4.181976] 1f80: 00000000 00000000 ed891fac ed891f98 c0645498 c09368c8 00000000 00000000 [ 4.181976] 1fa0: 00000000 ed891fb0 c0014658 c0645488 00000000 00000000 00000000 00000000 [ 4.182006] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.182006] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.182037] [] (of_get_next_child+0x64/0x70) from [] (cpu0_cpufreq_driver_init+0x24/0x284) [ 4.182067] [] (cpu0_cpufreq_driver_init+0x24/0x284) from [] (do_one_initcall+0x130/0x1b0) [ 4.182067] [] (do_one_initcall+0x130/0x1b0) from [] (kernel_init_freeable+0x184/0x24c) [ 4.182098] [] (kernel_init_freeable+0x184/0x24c) from [] (kernel_init+0x1c/0xf4) [ 4.182128] [] (kernel_init+0x1c/0xf4) from [] (ret_from_fork+0x14/0x20) [ 4.182128] Code: f57ff04f e320f004 e89da830 e89da830 (e595001c) [ 4.182128] ---[ end trace 634903a22e8609cb ]--- [ 4.182189] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.182189] [ 4.642395] CPU0: stopping [rjw: Changelog] Signed-off-by: Paolo Pisati Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-cpu0.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 4e5b7fb8927c..37d23a0f8c56 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -178,10 +178,16 @@ static struct cpufreq_driver cpu0_cpufreq_driver = { static int cpu0_cpufreq_probe(struct platform_device *pdev) { - struct device_node *np; + struct device_node *np, *parent; int ret; - for_each_child_of_node(of_find_node_by_path("/cpus"), np) { + parent = of_find_node_by_path("/cpus"); + if (!parent) { + pr_err("failed to find OF /cpus\n"); + return -ENOENT; + } + + for_each_child_of_node(parent, np) { if (of_get_property(np, "operating-points", NULL)) break; } -- cgit v1.2.1 From 29896178cff0cd6e4ee78edc26158cc197a6b504 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 1 Apr 2013 00:21:08 +0000 Subject: ACPI / SPI: Use parent's ACPI_HANDLE() in acpi_register_spi_devices() The ACPI handle of struct spi_master's dev member should not be set, because this causes that struct spi_master to be associated with the ACPI device node corresponding to its parent as the second "physical_device", which is incorrect (this happens during the registration of struct spi_master). Consequently, acpi_register_spi_devices() should use the ACPI handle of the parent of the struct spi_master it is called for rather than that struct spi_master's ACPI handle (which should be NULL). Make that happen and modify the spi-pxa2xx driver, which currently is the only driver for ACPI-enumerated SPI controller chips, not to set the ACPI handle for the struct spi_master it creates. Signed-off-by: Rafael J. Wysocki Acked-by: Mika Westerberg Acked-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 1 - drivers/spi/spi.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 90b27a3508a6..810413883c79 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1168,7 +1168,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) master->dev.parent = &pdev->dev; master->dev.of_node = pdev->dev.of_node; - ACPI_HANDLE_SET(&master->dev, ACPI_HANDLE(&pdev->dev)); /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index f996c600eb8c..5e073d897edb 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -984,7 +984,7 @@ static void acpi_register_spi_devices(struct spi_master *master) acpi_status status; acpi_handle handle; - handle = ACPI_HANDLE(&master->dev); + handle = ACPI_HANDLE(master->dev.parent); if (!handle) return; -- cgit v1.2.1 From ea81531de23cf92085e0601178fae920141caa5d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 21 Mar 2013 12:50:39 +0100 Subject: s390/uaccess: fix page table walk When translating user space addresses to kernel addresses the follow_table() function had two bugs: - PROT_NONE mappings could be read accessed via the kernel mapping. That is e.g. putting a filename into a user page, then protecting the page with PROT_NONE and afterwards issuing the "open" syscall with a pointer to the filename would incorrectly succeed. - when walking the page tables it used the pgd/pud/pmd/pte primitives which with dynamic page tables give no indication which real level of page tables is being walked (region2, region3, segment or page table). So in case of an exception the translation exception code passed to __handle_fault() is not necessarily correct. This is not really an issue since __handle_fault() doesn't evaluate the code. Only in case of e.g. a SIGBUS this code gets passed to user space. If user space can do something sane with the value is a different question though. To fix these issues don't use any Linux primitives. Only walk the page tables like the hardware would do it, however we leave quite some checks away since we know that we only have full size page tables and each index is within bounds. In theory this should fix all issues... Signed-off-by: Heiko Carstens Reviewed-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 1 + arch/s390/lib/uaccess_pt.c | 81 +++++++++++++++++++++++++++-------------- 2 files changed, 55 insertions(+), 27 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 4a2930844d43..1686d8f0f878 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -344,6 +344,7 @@ extern unsigned long MODULES_END; #define _REGION3_ENTRY_CO 0x100 /* change-recording override */ /* Bits in the segment table entry */ +#define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address */ #define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */ #define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */ #define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */ diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 6771fdd89377..466fb3383960 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -77,42 +77,69 @@ static size_t copy_in_kernel(size_t count, void __user *to, * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address * contains the (negative) exception code. */ -static __always_inline unsigned long follow_table(struct mm_struct *mm, - unsigned long addr, int write) +#ifdef CONFIG_64BIT +static unsigned long follow_table(struct mm_struct *mm, + unsigned long address, int write) { - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *ptep; + unsigned long *table = (unsigned long *)__pa(mm->pgd); + + switch (mm->context.asce_bits & _ASCE_TYPE_MASK) { + case _ASCE_TYPE_REGION1: + table = table + ((address >> 53) & 0x7ff); + if (unlikely(*table & _REGION_ENTRY_INV)) + return -0x39UL; + table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); + case _ASCE_TYPE_REGION2: + table = table + ((address >> 42) & 0x7ff); + if (unlikely(*table & _REGION_ENTRY_INV)) + return -0x3aUL; + table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); + case _ASCE_TYPE_REGION3: + table = table + ((address >> 31) & 0x7ff); + if (unlikely(*table & _REGION_ENTRY_INV)) + return -0x3bUL; + table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); + case _ASCE_TYPE_SEGMENT: + table = table + ((address >> 20) & 0x7ff); + if (unlikely(*table & _SEGMENT_ENTRY_INV)) + return -0x10UL; + if (unlikely(*table & _SEGMENT_ENTRY_LARGE)) { + if (write && (*table & _SEGMENT_ENTRY_RO)) + return -0x04UL; + return (*table & _SEGMENT_ENTRY_ORIGIN_LARGE) + + (address & ~_SEGMENT_ENTRY_ORIGIN_LARGE); + } + table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN); + } + table = table + ((address >> 12) & 0xff); + if (unlikely(*table & _PAGE_INVALID)) + return -0x11UL; + if (write && (*table & _PAGE_RO)) + return -0x04UL; + return (*table & PAGE_MASK) + (address & ~PAGE_MASK); +} - pgd = pgd_offset(mm, addr); - if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) - return -0x3aUL; +#else /* CONFIG_64BIT */ - pud = pud_offset(pgd, addr); - if (pud_none(*pud) || unlikely(pud_bad(*pud))) - return -0x3bUL; +static unsigned long follow_table(struct mm_struct *mm, + unsigned long address, int write) +{ + unsigned long *table = (unsigned long *)__pa(mm->pgd); - pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd)) + table = table + ((address >> 20) & 0x7ff); + if (unlikely(*table & _SEGMENT_ENTRY_INV)) return -0x10UL; - if (pmd_large(*pmd)) { - if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO)) - return -0x04UL; - return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK); - } - if (unlikely(pmd_bad(*pmd))) - return -0x10UL; - - ptep = pte_offset_map(pmd, addr); - if (!pte_present(*ptep)) + table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN); + table = table + ((address >> 12) & 0xff); + if (unlikely(*table & _PAGE_INVALID)) return -0x11UL; - if (write && (!pte_write(*ptep) || !pte_dirty(*ptep))) + if (write && (*table & _PAGE_RO)) return -0x04UL; - - return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK); + return (*table & PAGE_MASK) + (address & ~PAGE_MASK); } +#endif /* CONFIG_64BIT */ + static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, size_t n, int write_user) { -- cgit v1.2.1 From 765a0cac566c938821ae26efb4aa53b7502ee82c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 23 Mar 2013 10:29:01 +0100 Subject: s390/mm: provide emtpy check_pgt_cache() function All architectures need to provide a check_pgt_cache() function. The s390 one got lost somewhere. So reintroduce it to prevent future compile errors e.g. if Thomas Gleixner's idle loop rework patches get merged. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 1686d8f0f878..4a5443118cfb 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -1532,7 +1532,8 @@ extern int s390_enable_sie(void); /* * No page table caches to initialise */ -#define pgtable_cache_init() do { } while (0) +static inline void pgtable_cache_init(void) { } +static inline void check_pgt_cache(void) { } #include -- cgit v1.2.1 From 2ef5692efad330b67a234e2c49edad38538751e7 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Thu, 28 Mar 2013 05:20:22 -0400 Subject: ALSA: hda - bug fix on return value when getting HDMI ELD info In function snd_hdmi_get_eld(), the variable 'ret' should be initialized to 0. Otherwise it will be returned uninitialized as non-zero after ELD info is got successfully. Thus hdmi_present_sense() will always assume ELD info is invalid by mistake, and /proc file system cannot show the proper ELD info. Signed-off-by: Mengdong Lin Cc: stable@vger.kernel.org Acked-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_eld.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index 7dd846380a50..d0d7ac1e99d2 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -320,7 +320,7 @@ int snd_hdmi_get_eld(struct hda_codec *codec, hda_nid_t nid, unsigned char *buf, int *eld_size) { int i; - int ret; + int ret = 0; int size; /* -- cgit v1.2.1 From 10250911c6f3531e9c2f4f1c6017782bc9bcd6d4 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Thu, 28 Mar 2013 05:21:28 -0400 Subject: ALSA: hda - bug fix on HDMI ELD debug message This patch let ELD debug message show 'pin_eld->monitor_present' which reflects the real pin response to verb GET_PIN_SENSE. 'eld->monitor_present' should not be used here because 'eld' is a temp structure now and so its "monitor_present" is not set. Signed-off-by: Mengdong Lin Acked-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 78e1827d0a95..de8ac5c07fd0 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1196,7 +1196,7 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) _snd_printd(SND_PR_VERBOSE, "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", - codec->addr, pin_nid, eld->monitor_present, eld->eld_valid); + codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid); if (eld->eld_valid) { if (snd_hdmi_get_eld(codec, pin_nid, eld->eld_buffer, -- cgit v1.2.1 From d3dde52209ab571e4e2ec26c66f85ad1355f7475 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 28 Mar 2013 21:54:03 +0200 Subject: crypto: gcm - fix assumption that assoc has one segment rfc4543(gcm(*)) code for GMAC assumes that assoc scatterlist always contains only one segment and only makes use of this first segment. However ipsec passes assoc with three segments when using 'extended sequence number' thus in this case rfc4543(gcm(*)) fails to function correctly. Patch fixes this issue. Reported-by: Chaoxing Lin Tested-by: Chaoxing Lin Cc: stable@vger.kernel.org Signed-off-by: Jussi Kivilinna Signed-off-by: Herbert Xu --- crypto/gcm.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index 137ad1ec5438..13ccbda34ff9 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -44,6 +44,7 @@ struct crypto_rfc4543_ctx { struct crypto_rfc4543_req_ctx { u8 auth_tag[16]; + u8 assocbuf[32]; struct scatterlist cipher[1]; struct scatterlist payload[2]; struct scatterlist assoc[2]; @@ -1133,9 +1134,19 @@ static struct aead_request *crypto_rfc4543_crypt(struct aead_request *req, scatterwalk_crypto_chain(payload, dst, vdst == req->iv + 8, 2); assoclen += 8 + req->cryptlen - (enc ? 0 : authsize); - sg_init_table(assoc, 2); - sg_set_page(assoc, sg_page(req->assoc), req->assoc->length, - req->assoc->offset); + if (req->assoc->length == req->assoclen) { + sg_init_table(assoc, 2); + sg_set_page(assoc, sg_page(req->assoc), req->assoc->length, + req->assoc->offset); + } else { + BUG_ON(req->assoclen > sizeof(rctx->assocbuf)); + + scatterwalk_map_and_copy(rctx->assocbuf, req->assoc, 0, + req->assoclen, 0); + + sg_init_table(assoc, 2); + sg_set_buf(assoc, rctx->assocbuf, req->assoclen); + } scatterwalk_crypto_chain(assoc, payload, 0, 2); aead_request_set_tfm(subreq, ctx->child); -- cgit v1.2.1 From 477fc03f5baaf5906ce04beba7dbcd0e5d1e9b30 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 29 Mar 2013 03:40:00 +0200 Subject: fbmon: use VESA_DMT_VSYNC_HIGH to fix typo VESA_DMT_VSYNC_HIGH should be used instead of VESA_DMT_HSYNC_HIGH, because FB_SYNC_VERT_HIGH_ACT is related to vsync, not to hsync. Signed-off-by: Jingoo Han Acked-by: Steffen Trumtrar Signed-off-by: Tomi Valkeinen --- drivers/video/fbmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c index 94ad0f71383c..7f6709991a5c 100644 --- a/drivers/video/fbmon.c +++ b/drivers/video/fbmon.c @@ -1400,7 +1400,7 @@ int fb_videomode_from_videomode(const struct videomode *vm, fbmode->vmode = 0; if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH) fbmode->sync |= FB_SYNC_HOR_HIGH_ACT; - if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH) + if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH) fbmode->sync |= FB_SYNC_VERT_HIGH_ACT; if (vm->data_flags & DISPLAY_FLAGS_INTERLACED) fbmode->vmode |= FB_VMODE_INTERLACED; -- cgit v1.2.1 From 090da752cdd6f0786eee68c8dea8db7c8abd3798 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Sat, 30 Mar 2013 04:53:00 +0200 Subject: video:uvesafb: Fix dereference NULL pointer code path platform_device_alloc could failed and return NULL, we should check this before call platform_device_put. Signed-off-by: Wang YanQing Signed-off-by: Tomi Valkeinen --- drivers/video/uvesafb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index b75db0186488..d4284458377e 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -1973,7 +1973,8 @@ static int uvesafb_init(void) err = -ENOMEM; if (err) { - platform_device_put(uvesafb_device); + if (uvesafb_device) + platform_device_put(uvesafb_device); platform_driver_unregister(&uvesafb_driver); cn_del_callback(&uvesafb_cn_id); return err; -- cgit v1.2.1 From beb0ff390e208e71668a1389e3db02631a88cff5 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 2 Apr 2013 12:26:15 +0000 Subject: cpufreq: Correct header guards typo It should be "governor". Signed-off-by: Borislav Petkov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_governor.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index 46bde01eee62..cc4bd2f6838a 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -14,8 +14,8 @@ * published by the Free Software Foundation. */ -#ifndef _CPUFREQ_GOVERNER_H -#define _CPUFREQ_GOVERNER_H +#ifndef _CPUFREQ_GOVERNOR_H +#define _CPUFREQ_GOVERNOR_H #include #include @@ -175,4 +175,4 @@ bool need_load_eval(struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate); int cpufreq_governor_dbs(struct dbs_data *dbs_data, struct cpufreq_policy *policy, unsigned int event); -#endif /* _CPUFREQ_GOVERNER_H */ +#endif /* _CPUFREQ_GOVERNOR_H */ -- cgit v1.2.1 From b34bb1ee71158d5b0f9028fb98afd026202bcfe9 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 1 Apr 2013 00:25:03 +0000 Subject: ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices() The ACPI handle of struct i2c_adapter's dev member should not be set, because this causes that struct i2c_adapter to be associated with the ACPI device node corresponding to its parent as the second "physical_device", which is incorrect (this happens during the registration of struct i2c_adapter). Consequently, acpi_i2c_register_devices() should use the ACPI handle of the parent of the struct i2c_adapter it is called for rather than the struct i2c_adapter's ACPI handle (which should be NULL). Make that happen and modify the i2c-designware-platdrv driver, which currently is the only driver for ACPI-enumerated I2C controller chips, not to set the ACPI handle for the struct i2c_adapter it creates. Signed-off-by: Rafael J. Wysocki Reviewed-by: Aaron Lu Acked-by: Mika Westerberg Acked-by: Wolfram Sang --- drivers/acpi/acpi_i2c.c | 2 +- drivers/i2c/busses/i2c-designware-platdrv.c | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c index 82045e3f5cac..a82c7626aa9b 100644 --- a/drivers/acpi/acpi_i2c.c +++ b/drivers/acpi/acpi_i2c.c @@ -90,7 +90,7 @@ void acpi_i2c_register_devices(struct i2c_adapter *adapter) acpi_handle handle; acpi_status status; - handle = ACPI_HANDLE(&adapter->dev); + handle = ACPI_HANDLE(adapter->dev.parent); if (!handle) return; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0ceb6e1b0f65..e3085c487ace 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -182,7 +182,6 @@ static int dw_i2c_probe(struct platform_device *pdev) adap->algo = &i2c_dw_algo; adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; - ACPI_HANDLE_SET(&adap->dev, ACPI_HANDLE(&pdev->dev)); r = i2c_add_numbered_adapter(adap); if (r) { -- cgit v1.2.1 From 6240a10dc55a954ce05a86d2f4bc27e473b6352c Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Tue, 2 Apr 2013 01:56:54 +0200 Subject: cpuidle / ACPI: recover percpu ACPI processor cstate Commit ac3ebafa81af76d6 "ACPI / idle: remove usage of the statedata" changed the percpu processor cstate to a unified cstate in ACPI idle. That caused all our NHM boxes to boot hang or panic. 2178751 Task dump for CPU 1: 2178752 swapper/1 R running task 6736 0 1 0x00000000 2178753 ffff8801e8029dc8 ffffffff8101cf96 ffff8801e8029e28 ffffffff813d294b 2178754 0000000000000f99 0000000000000003 00000000003cf654 0000000025c17d03 2178755 ffff8801e8029e38 ffff8801e74fc000 00000002590dc5c4 ffffffff8163cdb0 2178756 Call Trace: 2178757 [] ? acpi_processor_ffh_cstate_enter+0x2d/0x2f 2178758 [] acpi_idle_enter_bm+0x1b1/0x236 2178759 [] ? disable_cpuidle+0x10/0x10 2178760 [] cpuidle_enter+0x12/0x14 2178761 [] cpuidle_wrap_enter+0x2f/0x6d 2178762 [] cpuidle_enter_tk+0x10/0x12 2178763 [] cpuidle_enter_state+0x12/0x3a 2178764 [] cpuidle_idle_call+0xe8/0x161 2178765 [] cpu_idle+0x5e/0xa4 2178766 [] start_secondary+0x1a9/0x1ad 2178767 Task dump for CPU 2: In fact, the ACPI idle is based on the assumption of difference percpu cstate structures that are necessary for the implementation to work cprrectly. A unique acpi_processor_cx is not sifficient by far. This patch is just a quick fix re-introducing the percpu cstates. If someone really wants to unify the ACPI cstates, please make sure that the whole software infrastructure is changed and take hardware as well as many different kinds of BIOS settings into account. [rjw: Changelog] Reported-by: LKP project Reported-by: Xie ChanglongX Tested-by: Yinghai Lu Signed-off-by: Alex Shi Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index fc95308e9a11..ee255c60bdac 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -66,7 +66,8 @@ module_param(latency_factor, uint, 0644); static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device); -static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX]; +static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], + acpi_cstate); static int disabled_by_idle_boot_param(void) { @@ -722,7 +723,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct acpi_processor *pr; - struct acpi_processor_cx *cx = acpi_cstate[index]; + struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); pr = __this_cpu_read(processors); @@ -745,7 +746,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, */ static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) { - struct acpi_processor_cx *cx = acpi_cstate[index]; + struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); ACPI_FLUSH_CPU_CACHE(); @@ -775,7 +776,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct acpi_processor *pr; - struct acpi_processor_cx *cx = acpi_cstate[index]; + struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); pr = __this_cpu_read(processors); @@ -833,7 +834,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct acpi_processor *pr; - struct acpi_processor_cx *cx = acpi_cstate[index]; + struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); pr = __this_cpu_read(processors); @@ -960,7 +961,7 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) continue; #endif - acpi_cstate[count] = cx; + per_cpu(acpi_cstate[count], dev->cpu) = cx; count++; if (count == CPUIDLE_STATE_MAX) -- cgit v1.2.1 From fcd99434fb5c137274d2e15dd2a6a7455f0f29ff Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 2 Apr 2013 05:15:16 +0000 Subject: bonding: get netdev_rx_handler_unregister out of locks Now that netdev_rx_handler_unregister contains synchronize_net(), we need to call it outside of bond->lock, cause it might sleep. Also, remove the already unneded synchronize_net(). Signed-off-by: Veaceslav Falico Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6bbd90e1123c..a51241b2e621 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1976,12 +1976,11 @@ static int __bond_release_one(struct net_device *bond_dev, return -EINVAL; } + write_unlock_bh(&bond->lock); /* unregister rx_handler early so bond_handle_frame wouldn't be called * for this slave anymore. */ netdev_rx_handler_unregister(slave_dev); - write_unlock_bh(&bond->lock); - synchronize_net(); write_lock_bh(&bond->lock); if (!all && !bond->params.fail_over_mac) { -- cgit v1.2.1 From bab6a9eac05360db25c81b0090f6b1195dd986cc Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Tue, 2 Apr 2013 16:49:45 +0300 Subject: net/mlx4_en: Fix setting initial MAC address Commit 6bbb6d9 "net/mlx4_en: Optimize Rx fast path filter checks" introduced a regression under which the MAC address read from the card was not converted correctly (the most significant byte was not handled), fix that. Reviewed-by: Or Gerlitz Signed-off-by: Yan Burman Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index f278b10ef714..30d78f806dc3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -411,8 +411,8 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac) { - unsigned int i; - for (i = ETH_ALEN - 1; i; --i) { + int i; + for (i = ETH_ALEN - 1; i >= 0; --i) { dst_mac[i] = src_mac & 0xff; src_mac >>= 8; } -- cgit v1.2.1 From 2dc958fa2fe6987e7ab106bd97029a09a82fcd8d Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Mon, 1 Apr 2013 11:40:51 +0400 Subject: ipc: set msg back to -EAGAIN if copy wasn't performed Make sure that msg pointer is set back to error value in case of MSG_COPY flag is set and desired message to copy wasn't found. This garantees that msg is either a error pointer or a copy address. Otherwise the last message in queue will be freed without unlinking from the queue (which leads to memory corruption) and the dummy allocated copy won't be released. Signed-off-by: Stanislav Kinsbursky Signed-off-by: Linus Torvalds --- ipc/msg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/ipc/msg.c b/ipc/msg.c index 31cd1bf6af27..fede1d06ef30 100644 --- a/ipc/msg.c +++ b/ipc/msg.c @@ -872,6 +872,7 @@ long do_msgrcv(int msqid, void __user *buf, size_t bufsz, long msgtyp, goto out_unlock; break; } + msg = ERR_PTR(-EAGAIN); } else break; msg_counter++; -- cgit v1.2.1 From 0b94c57717054811dd836d582585d3fb4856b43f Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 5 Mar 2013 14:55:31 +0530 Subject: DMA: PL330: Add check if device tree compatible This patch register the dma controller with generic dma helpers only in DT case. This also adds some extra error handling in the driver. Signed-off-by: Padmavathi Venna Reported-by: Sachin Kamat Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 38 +++++++++++++++++++++++++++----------- 1 file changed, 27 insertions(+), 11 deletions(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 718153122759..5dbc5946c4c3 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2882,7 +2882,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) { struct dma_pl330_platdata *pdat; struct dma_pl330_dmac *pdmac; - struct dma_pl330_chan *pch; + struct dma_pl330_chan *pch, *_p; struct pl330_info *pi; struct dma_device *pd; struct resource *res; @@ -2984,7 +2984,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) ret = dma_async_device_register(pd); if (ret) { dev_err(&adev->dev, "unable to register DMAC\n"); - goto probe_err2; + goto probe_err3; + } + + if (adev->dev.of_node) { + ret = of_dma_controller_register(adev->dev.of_node, + of_dma_pl330_xlate, pdmac); + if (ret) { + dev_err(&adev->dev, + "unable to register DMA to the generic DT DMA helpers\n"); + } } dev_info(&adev->dev, @@ -2995,16 +3004,21 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan, pi->pcfg.num_peri, pi->pcfg.num_events); - ret = of_dma_controller_register(adev->dev.of_node, - of_dma_pl330_xlate, pdmac); - if (ret) { - dev_err(&adev->dev, - "unable to register DMA to the generic DT DMA helpers\n"); - goto probe_err2; - } - return 0; +probe_err3: + amba_set_drvdata(adev, NULL); + /* Idle the DMAC */ + list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels, + chan.device_node) { + + /* Remove the channel */ + list_del(&pch->chan.device_node); + + /* Flush the channel */ + pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0); + pl330_free_chan_resources(&pch->chan); + } probe_err2: pl330_del(pi); probe_err1: @@ -3023,8 +3037,10 @@ static int pl330_remove(struct amba_device *adev) if (!pdmac) return 0; - of_dma_controller_free(adev->dev.of_node); + if (adev->dev.of_node) + of_dma_controller_free(adev->dev.of_node); + dma_async_device_unregister(&pdmac->ddma); amba_set_drvdata(adev, NULL); /* Idle the DMAC */ -- cgit v1.2.1 From bee980d9e9642e96351fa3ca9077b853ecf62f57 Mon Sep 17 00:00:00 2001 From: Keir Fraser Date: Thu, 28 Mar 2013 10:03:36 -0400 Subject: xen/events: Handle VIRQ_TIMER before any other hardirq in event loop. This avoids any other hardirq handler seeing a very stale jiffies value immediately after wakeup from a long idle period. The one observable symptom of this was a USB keyboard, with software keyboard repeat, which would always repeat a key immediately that it was pressed. This is due to the key press waking the guest, the key handler immediately runs, sees an old jiffies value, and then that jiffies value significantly updated, before the key is unpressed. Reviewed-by: David Vrabel Signed-off-by: Keir Fraser Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/events.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index aa85881d17b2..2647ad8e1f19 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -1316,7 +1316,7 @@ static void __xen_evtchn_do_upcall(void) { int start_word_idx, start_bit_idx; int word_idx, bit_idx; - int i; + int i, irq; int cpu = get_cpu(); struct shared_info *s = HYPERVISOR_shared_info; struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu); @@ -1324,6 +1324,8 @@ static void __xen_evtchn_do_upcall(void) do { xen_ulong_t pending_words; + xen_ulong_t pending_bits; + struct irq_desc *desc; vcpu_info->evtchn_upcall_pending = 0; @@ -1335,6 +1337,17 @@ static void __xen_evtchn_do_upcall(void) * selector flag. xchg_xen_ulong must contain an * appropriate barrier. */ + if ((irq = per_cpu(virq_to_irq, cpu)[VIRQ_TIMER]) != -1) { + int evtchn = evtchn_from_irq(irq); + word_idx = evtchn / BITS_PER_LONG; + pending_bits = evtchn % BITS_PER_LONG; + if (active_evtchns(cpu, s, word_idx) & (1ULL << pending_bits)) { + desc = irq_to_desc(irq); + if (desc) + generic_handle_irq_desc(irq, desc); + } + } + pending_words = xchg_xen_ulong(&vcpu_info->evtchn_pending_sel, 0); start_word_idx = __this_cpu_read(current_word_idx); @@ -1343,7 +1356,6 @@ static void __xen_evtchn_do_upcall(void) word_idx = start_word_idx; for (i = 0; pending_words != 0; i++) { - xen_ulong_t pending_bits; xen_ulong_t words; words = MASK_LSBS(pending_words, word_idx); @@ -1372,8 +1384,7 @@ static void __xen_evtchn_do_upcall(void) do { xen_ulong_t bits; - int port, irq; - struct irq_desc *desc; + int port; bits = MASK_LSBS(pending_bits, bit_idx); -- cgit v1.2.1 From b22227944b8fe92b19150b4c36421e37979d9a16 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 29 Mar 2013 10:20:56 -0400 Subject: xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables. Occassionaly on a DL380 G4 the guest would crash quite early with this: (XEN) d244:v0: unhandled page fault (ec=0003) (XEN) Pagetable walk from ffffffff84dc7000: (XEN) L4[0x1ff] = 00000000c3f18067 0000000000001789 (XEN) L3[0x1fe] = 00000000c3f14067 000000000000178d (XEN) L2[0x026] = 00000000dc8b2067 0000000000004def (XEN) L1[0x1c7] = 00100000dc8da067 0000000000004dc7 (XEN) domain_crash_sync called from entry.S (XEN) Domain 244 (vcpu#0) crashed on cpu#3: (XEN) ----[ Xen-4.1.3OVM x86_64 debug=n Not tainted ]---- (XEN) CPU: 3 (XEN) RIP: e033:[] (XEN) RFLAGS: 0000000000000216 EM: 1 CONTEXT: pv guest (XEN) rax: 0000000000000000 rbx: ffffffff81785f88 rcx: 000000000000003f (XEN) rdx: 0000000000000000 rsi: 00000000dc8da063 rdi: ffffffff84dc7000 The offending code shows it to be a loop writting the value zero (%rax) in the %rdi (the L4 provided by Xen) register: 0: 44 00 00 add %r8b,(%rax) 3: 31 c0 xor %eax,%eax 5: b9 40 00 00 00 mov $0x40,%ecx a: 66 0f 1f 84 00 00 00 nopw 0x0(%rax,%rax,1) 11: 00 00 13: ff c9 dec %ecx 15:* 48 89 07 mov %rax,(%rdi) <-- trapping instruction 18: 48 89 47 08 mov %rax,0x8(%rdi) 1c: 48 89 47 10 mov %rax,0x10(%rdi) which fails. xen_setup_kernel_pagetable recycles some of the Xen's page-table entries when it has switched over to its Linux page-tables. Right before try to clear the page, we make a hypercall to change it from _RO to _RW and that works (otherwise we would hit an BUG()). And the _RW flag is set for that page: (XEN) L1[0x1c7] = 001000004885f067 0000000000004dc7 The error code is 3, so PFEC_page_present and PFEC_write_access, so page is present (correct), and we tried to write to the page, but a violation occurred. The one theory is that the the page entries in hardware (which are cached) are not up to date with what we just set. Especially as we have just done an CR3 write and flushed the multicalls. This patch does solve the problem by flusing out the TLB page entry after changing it from _RO to _RW and we don't hit this issue anymore. Fixed-Oracle-Bug: 16243091 [ON OCCASIONS VM START GOES INTO 'CRASH' STATE: CLEAR_PAGE+0X12 ON HP DL380 G4] Reported-and-Tested-by: Saar Maoz Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/mmu.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 6afbb2ca9a0a..a4ea92477e01 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1748,14 +1748,18 @@ static void *m2v(phys_addr_t maddr) } /* Set the page permissions on an identity-mapped pages */ -static void set_page_prot(void *addr, pgprot_t prot) +static void set_page_prot_flags(void *addr, pgprot_t prot, unsigned long flags) { unsigned long pfn = __pa(addr) >> PAGE_SHIFT; pte_t pte = pfn_pte(pfn, prot); - if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0)) + if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, flags)) BUG(); } +static void set_page_prot(void *addr, pgprot_t prot) +{ + return set_page_prot_flags(addr, prot, UVMF_NONE); +} #ifdef CONFIG_X86_32 static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn) { @@ -1839,12 +1843,12 @@ static void __init check_pt_base(unsigned long *pt_base, unsigned long *pt_end, unsigned long addr) { if (*pt_base == PFN_DOWN(__pa(addr))) { - set_page_prot((void *)addr, PAGE_KERNEL); + set_page_prot_flags((void *)addr, PAGE_KERNEL, UVMF_INVLPG); clear_page((void *)addr); (*pt_base)++; } if (*pt_end == PFN_DOWN(__pa(addr))) { - set_page_prot((void *)addr, PAGE_KERNEL); + set_page_prot_flags((void *)addr, PAGE_KERNEL, UVMF_INVLPG); clear_page((void *)addr); (*pt_end)--; } -- cgit v1.2.1 From f0f6ee1f70c4eaab9d52cf7d255df4bd89f8d1c2 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Mon, 1 Apr 2013 03:01:32 +0000 Subject: cbq: incorrect processing of high limits currently cbq works incorrectly for limits > 10% real link bandwidth, and practically does not work for limits > 50% real link bandwidth. Below are results of experiments taken on 1 Gbit link In shaper | Actual Result -----------+--------------- 100M | 108 Mbps 200M | 244 Mbps 300M | 412 Mbps 500M | 893 Mbps This happen because of q->now changes incorrectly in cbq_dequeue(): when it is called before real end of packet transmitting, L2T is greater than real time delay, q_now gets an extra boost but never compensate it. To fix this problem we prevent change of q->now until its synchronization with real time. Signed-off-by: Vasily Averin Reviewed-by: Alexey Kuznetsov Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_cbq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 13aa47aa2ffb..1bc210ffcba2 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -962,8 +962,11 @@ cbq_dequeue(struct Qdisc *sch) cbq_update(q); if ((incr -= incr2) < 0) incr = 0; + q->now += incr; + } else { + if (now > q->now) + q->now = now; } - q->now += incr; q->now_rt = now; for (;;) { -- cgit v1.2.1 From 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f Mon Sep 17 00:00:00 2001 From: Balakumaran Kannan Date: Tue, 2 Apr 2013 16:15:05 +0530 Subject: net IPv6 : Fix broken IPv6 routing table after loopback down-up IPv6 Routing table becomes broken once we do ifdown, ifup of the loopback(lo) interface. After down-up, routes of other interface's IPv6 addresses through 'lo' are lost. IPv6 addresses assigned to all interfaces are routed through 'lo' for internal communication. Once 'lo' is down, those routing entries are removed from routing table. But those removed entries are not being re-created properly when 'lo' is brought up. So IPv6 addresses of other interfaces becomes unreachable from the same machine. Also this breaks communication with other machines because of NDISC packet processing failure. This patch fixes this issue by reading all interface's IPv6 addresses and adding them to IPv6 routing table while bringing up 'lo'. ==Testing== Before applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ After applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ Signed-off-by: Balakumaran Kannan Signed-off-by: Maruthi Thotad Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 26512250e095..a459c4f5b769 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2529,6 +2529,9 @@ static void sit_add_v4_addrs(struct inet6_dev *idev) static void init_loopback(struct net_device *dev) { struct inet6_dev *idev; + struct net_device *sp_dev; + struct inet6_ifaddr *sp_ifa; + struct rt6_info *sp_rt; /* ::1 */ @@ -2540,6 +2543,30 @@ static void init_loopback(struct net_device *dev) } add_addr(idev, &in6addr_loopback, 128, IFA_HOST); + + /* Add routes to other interface's IPv6 addresses */ + for_each_netdev(dev_net(dev), sp_dev) { + if (!strcmp(sp_dev->name, dev->name)) + continue; + + idev = __in6_dev_get(sp_dev); + if (!idev) + continue; + + read_lock_bh(&idev->lock); + list_for_each_entry(sp_ifa, &idev->addr_list, if_list) { + + if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE)) + continue; + + sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0); + + /* Failure cases are ignored */ + if (!IS_ERR(sp_rt)) + ip6_ins_rt(sp_rt); + } + read_unlock_bh(&idev->lock); + } } static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr) -- cgit v1.2.1 From 990454b5a48babde44a23c0f22bae5523f4fdf13 Mon Sep 17 00:00:00 2001 From: Reilly Grant Date: Mon, 1 Apr 2013 11:41:52 -0700 Subject: VSOCK: Handle changes to the VMCI context ID. The VMCI context ID of a virtual machine may change at any time. There is a VMCI event which signals this but datagrams may be processed before this is handled. It is therefore necessary to be flexible about the destination context ID of any datagrams received. (It can be assumed to be correct because it is provided by the hypervisor.) The context ID on existing sockets should be updated to reflect how the hypervisor is currently referring to the system. Signed-off-by: Reilly Grant Acked-by: Andy King Signed-off-by: David S. Miller --- net/vmw_vsock/af_vsock.c | 6 +++--- net/vmw_vsock/vmci_transport.c | 31 ++++++++++++++++++++----------- net/vmw_vsock/vsock_addr.c | 10 ---------- net/vmw_vsock/vsock_addr.h | 2 -- 4 files changed, 23 insertions(+), 26 deletions(-) diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index ca511c4f388a..d8079daf1bde 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -207,7 +207,7 @@ static struct sock *__vsock_find_bound_socket(struct sockaddr_vm *addr) struct vsock_sock *vsk; list_for_each_entry(vsk, vsock_bound_sockets(addr), bound_table) - if (vsock_addr_equals_addr_any(addr, &vsk->local_addr)) + if (addr->svm_port == vsk->local_addr.svm_port) return sk_vsock(vsk); return NULL; @@ -220,8 +220,8 @@ static struct sock *__vsock_find_connected_socket(struct sockaddr_vm *src, list_for_each_entry(vsk, vsock_connected_sockets(src, dst), connected_table) { - if (vsock_addr_equals_addr(src, &vsk->remote_addr) - && vsock_addr_equals_addr(dst, &vsk->local_addr)) { + if (vsock_addr_equals_addr(src, &vsk->remote_addr) && + dst->svm_port == vsk->local_addr.svm_port) { return sk_vsock(vsk); } } diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c index a70ace83a153..1f6508e249ae 100644 --- a/net/vmw_vsock/vmci_transport.c +++ b/net/vmw_vsock/vmci_transport.c @@ -464,19 +464,16 @@ static struct sock *vmci_transport_get_pending( struct vsock_sock *vlistener; struct vsock_sock *vpending; struct sock *pending; + struct sockaddr_vm src; + + vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port); vlistener = vsock_sk(listener); list_for_each_entry(vpending, &vlistener->pending_links, pending_links) { - struct sockaddr_vm src; - struct sockaddr_vm dst; - - vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port); - vsock_addr_init(&dst, pkt->dg.dst.context, pkt->dst_port); - if (vsock_addr_equals_addr(&src, &vpending->remote_addr) && - vsock_addr_equals_addr(&dst, &vpending->local_addr)) { + pkt->dst_port == vpending->local_addr.svm_port) { pending = sk_vsock(vpending); sock_hold(pending); goto found; @@ -739,10 +736,15 @@ static int vmci_transport_recv_stream_cb(void *data, struct vmci_datagram *dg) */ bh_lock_sock(sk); - if (!sock_owned_by_user(sk) && sk->sk_state == SS_CONNECTED) - vmci_trans(vsk)->notify_ops->handle_notify_pkt( - sk, pkt, true, &dst, &src, - &bh_process_pkt); + if (!sock_owned_by_user(sk)) { + /* The local context ID may be out of date, update it. */ + vsk->local_addr.svm_cid = dst.svm_cid; + + if (sk->sk_state == SS_CONNECTED) + vmci_trans(vsk)->notify_ops->handle_notify_pkt( + sk, pkt, true, &dst, &src, + &bh_process_pkt); + } bh_unlock_sock(sk); @@ -902,6 +904,9 @@ static void vmci_transport_recv_pkt_work(struct work_struct *work) lock_sock(sk); + /* The local context ID may be out of date. */ + vsock_sk(sk)->local_addr.svm_cid = pkt->dg.dst.context; + switch (sk->sk_state) { case SS_LISTEN: vmci_transport_recv_listen(sk, pkt); @@ -958,6 +963,10 @@ static int vmci_transport_recv_listen(struct sock *sk, pending = vmci_transport_get_pending(sk, pkt); if (pending) { lock_sock(pending); + + /* The local context ID may be out of date. */ + vsock_sk(pending)->local_addr.svm_cid = pkt->dg.dst.context; + switch (pending->sk_state) { case SS_CONNECTING: err = vmci_transport_recv_connecting_server(sk, diff --git a/net/vmw_vsock/vsock_addr.c b/net/vmw_vsock/vsock_addr.c index b7df1aea7c59..ec2611b4ea0e 100644 --- a/net/vmw_vsock/vsock_addr.c +++ b/net/vmw_vsock/vsock_addr.c @@ -64,16 +64,6 @@ bool vsock_addr_equals_addr(const struct sockaddr_vm *addr, } EXPORT_SYMBOL_GPL(vsock_addr_equals_addr); -bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr, - const struct sockaddr_vm *other) -{ - return (addr->svm_cid == VMADDR_CID_ANY || - other->svm_cid == VMADDR_CID_ANY || - addr->svm_cid == other->svm_cid) && - addr->svm_port == other->svm_port; -} -EXPORT_SYMBOL_GPL(vsock_addr_equals_addr_any); - int vsock_addr_cast(const struct sockaddr *addr, size_t len, struct sockaddr_vm **out_addr) { diff --git a/net/vmw_vsock/vsock_addr.h b/net/vmw_vsock/vsock_addr.h index cdfbcefdf843..9ccd5316eac0 100644 --- a/net/vmw_vsock/vsock_addr.h +++ b/net/vmw_vsock/vsock_addr.h @@ -24,8 +24,6 @@ bool vsock_addr_bound(const struct sockaddr_vm *addr); void vsock_addr_unbind(struct sockaddr_vm *addr); bool vsock_addr_equals_addr(const struct sockaddr_vm *addr, const struct sockaddr_vm *other); -bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr, - const struct sockaddr_vm *other); int vsock_addr_cast(const struct sockaddr *addr, size_t len, struct sockaddr_vm **out_addr); -- cgit v1.2.1 From a8ec3a662921220fc058ed6f7f3674697876d218 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Tue, 2 Apr 2013 09:56:10 -0400 Subject: drm: correctly restore mappings if drm_open fails If first drm_open fails, the error-handling path will incorrectly restore inode's mapping to NULL. This can cause the crash later on. Fix by separately storing away mapping pointers that drm_open can touch and restore each from its own respective variable if the call fails. Fixes: https://bugzilla.novell.com/show_bug.cgi?id=807850 (thanks to Michal Hocko for investigating investigating and finding the root cause of the bug) Reference: http://lists.freedesktop.org/archives/dri-devel/2013-March/036564.html v2: Use one variable to store file and inode mapping since they are the same at the function entry. Fix spelling mistakes in commit message. v3: Add reference to the original bug report. Reported-by: Marco Munderloh Tested-by: Marco Munderloh Signed-off-by: Ilija Hadzic Cc: Michal Hocko Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fops.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 13fdcd10a605..429e07d0b0f1 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -123,6 +123,7 @@ int drm_open(struct inode *inode, struct file *filp) int retcode = 0; int need_setup = 0; struct address_space *old_mapping; + struct address_space *old_imapping; minor = idr_find(&drm_minors_idr, minor_id); if (!minor) @@ -137,6 +138,7 @@ int drm_open(struct inode *inode, struct file *filp) if (!dev->open_count++) need_setup = 1; mutex_lock(&dev->struct_mutex); + old_imapping = inode->i_mapping; old_mapping = dev->dev_mapping; if (old_mapping == NULL) dev->dev_mapping = &inode->i_data; @@ -159,8 +161,8 @@ int drm_open(struct inode *inode, struct file *filp) err_undo: mutex_lock(&dev->struct_mutex); - filp->f_mapping = old_mapping; - inode->i_mapping = old_mapping; + filp->f_mapping = old_imapping; + inode->i_mapping = old_imapping; iput(container_of(dev->dev_mapping, struct inode, i_data)); dev->dev_mapping = old_mapping; mutex_unlock(&dev->struct_mutex); -- cgit v1.2.1 From b62d7946b2dd04e07734313a450cb0a8b440f206 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Tue, 2 Apr 2013 19:37:11 +0200 Subject: MAINTAINERS: Add maintainer for LPC32xx This patch adds Roland Stigge as maintainer for NXP LPC32xx. Signed-off-by: Roland Stigge Signed-off-by: Olof Johansson --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4cf5fd334a06..d596a3f6345a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4935,6 +4935,12 @@ W: logfs.org S: Maintained F: fs/logfs/ +LPC32XX MACHINE SUPPORT +M: Roland Stigge +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-lpc32xx/ + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Nagalakshmi Nandigama M: Sreekanth Reddy -- cgit v1.2.1 From 8b4b9f27e57584f3d90e0bb84cf800ad81cfe3a1 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 15 Feb 2013 12:21:43 -0500 Subject: x86: remove the x32 syscall bitmask from syscall_get_nr() Commit fca460f95e928bae373daa8295877b6905bc62b8 simplified the x32 implementation by creating a syscall bitmask, equal to 0x40000000, that could be applied to x32 syscalls such that the masked syscall number would be the same as a x86_64 syscall. While that patch was a nice way to simplify the code, it went a bit too far by adding the mask to syscall_get_nr(); returning the masked syscall numbers can cause confusion with callers that expect syscall numbers matching the x32 ABI, e.g. unmasked syscall numbers. This patch fixes this by simply removing the mask from syscall_get_nr() while preserving the other changes from the original commit. While there are several syscall_get_nr() callers in the kernel, most simply check that the syscall number is greater than zero, in this case this patch will have no effect. Of those remaining callers, they appear to be few, seccomp and ftrace, and from my testing of seccomp without this patch the original commit definitely breaks things; the seccomp filter does not correctly filter the syscalls due to the difference in syscall numbers in the BPF filter and the value from syscall_get_nr(). Applying this patch restores the seccomp BPF filter functionality on x32. I've tested this patch with the seccomp BPF filters as well as ftrace and everything looks reasonable to me; needless to say general usage seemed fine as well. Signed-off-by: Paul Moore Link: http://lkml.kernel.org/r/20130215172143.12549.10292.stgit@localhost Cc: Cc: Will Drewry Cc: H. Peter Anvin Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/syscall.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h index 1ace47b62592..2e188d68397c 100644 --- a/arch/x86/include/asm/syscall.h +++ b/arch/x86/include/asm/syscall.h @@ -29,13 +29,13 @@ extern const unsigned long sys_call_table[]; */ static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs) { - return regs->orig_ax & __SYSCALL_MASK; + return regs->orig_ax; } static inline void syscall_rollback(struct task_struct *task, struct pt_regs *regs) { - regs->ax = regs->orig_ax & __SYSCALL_MASK; + regs->ax = regs->orig_ax; } static inline long syscall_get_error(struct task_struct *task, -- cgit v1.2.1 From af0d9187f66db2711f94dc20d5a06ec9ba5845b3 Mon Sep 17 00:00:00 2001 From: Asias He Date: Tue, 2 Apr 2013 23:31:37 +0800 Subject: tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access In vhost_scsi_handle_vq: tv_tpg = vs->vs_tpg[target]; if (!tv_tpg) { .... return } tv_cmd = vhost_scsi_allocate_cmd(tv_tpg, &v_req, 1) vs->vs_tpg[target] might change after the NULL check and 2) the above line might access tv_tpg from vs->vs_tpg[target]. To prevent 2), use ACCESS_ONCE. Thanks mst for catching this up! Signed-off-by: Asias He Acked-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 2968b4934659..dd9614eb2577 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -661,7 +661,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, /* Extract the tpgt */ target = v_req.lun[1]; - tv_tpg = vs->vs_tpg[target]; + tv_tpg = ACCESS_ONCE(vs->vs_tpg[target]); /* Target does not exist, fail the request */ if (unlikely(!tv_tpg)) { -- cgit v1.2.1 From b8178f130e25c1bdac1c33e0996f1ff6e20ec08e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 1 Apr 2013 15:47:39 -0600 Subject: Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" This reverts commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6. Conflicts: drivers/acpi/pci_root.c This commit broke some pre-1.1 PCIe devices by leaving them with ASPM enabled. Previously, we had disabled ASPM on these devices because many of them don't implement it correctly (per 149e1637). Requesting _OSC control early means that aspm_disabled may be set before we scan the PCI bus and configure link ASPM state. But the ASPM configuration currently skips the check for pre-PCIe 1.1 devices when aspm_disabled is set, like this: acpi_pci_root_add acpi_pci_osc_support if (flags != base_flags) pcie_no_aspm aspm_disabled = 1 pci_acpi_scan_root ... pcie_aspm_init_link_state pcie_aspm_sanity_check if (!aspm_disabled) /* check for pre-PCIe 1.1 device */ Therefore, setting aspm_disabled early means that we leave ASPM enabled on these pre-PCIe 1.1 devices, which is a regression for some devices. The best fix would be to clean up the ASPM init so we can evaluate _OSC before scanning the bug (that way boot-time and hot-add discovery will work the same), but that requires significant rework. For now, we'll just revert the _OSC change as the lowest-risk fix. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=55211 Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki Acked-by: Yinghai Lu CC: stable@vger.kernel.org # v3.8+ --- drivers/acpi/pci_root.c | 76 ++++++++++++++++++++++++------------------------- 1 file changed, 37 insertions(+), 39 deletions(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 0ac546d5e53f..c740364d4abe 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -415,7 +415,6 @@ static int acpi_pci_root_add(struct acpi_device *device, struct acpi_pci_root *root; struct acpi_pci_driver *driver; u32 flags, base_flags; - bool is_osc_granted = false; root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL); if (!root) @@ -476,6 +475,30 @@ static int acpi_pci_root_add(struct acpi_device *device, flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT; acpi_pci_osc_support(root, flags); + /* + * TBD: Need PCI interface for enumeration/configuration of roots. + */ + + mutex_lock(&acpi_pci_root_lock); + list_add_tail(&root->node, &acpi_pci_roots); + mutex_unlock(&acpi_pci_root_lock); + + /* + * Scan the Root Bridge + * -------------------- + * Must do this prior to any attempt to bind the root device, as the + * PCI namespace does not get created until this call is made (and + * thus the root bridge's pci_dev does not exist). + */ + root->bus = pci_acpi_scan_root(root); + if (!root->bus) { + printk(KERN_ERR PREFIX + "Bus %04x:%02x not present in PCI namespace\n", + root->segment, (unsigned int)root->secondary.start); + result = -ENODEV; + goto out_del_root; + } + /* Indicate support for various _OSC capabilities. */ if (pci_ext_cfg_avail()) flags |= OSC_EXT_PCI_CONFIG_SUPPORT; @@ -494,6 +517,7 @@ static int acpi_pci_root_add(struct acpi_device *device, flags = base_flags; } } + if (!pcie_ports_disabled && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) { flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL @@ -514,54 +538,28 @@ static int acpi_pci_root_add(struct acpi_device *device, status = acpi_pci_osc_control_set(device->handle, &flags, OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); if (ACPI_SUCCESS(status)) { - is_osc_granted = true; dev_info(&device->dev, "ACPI _OSC control (0x%02x) granted\n", flags); + if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { + /* + * We have ASPM control, but the FADT indicates + * that it's unsupported. Clear it. + */ + pcie_clear_aspm(root->bus); + } } else { - is_osc_granted = false; dev_info(&device->dev, "ACPI _OSC request failed (%s), " "returned control mask: 0x%02x\n", acpi_format_exception(status), flags); + pr_info("ACPI _OSC control for PCIe not granted, " + "disabling ASPM\n"); + pcie_no_aspm(); } } else { dev_info(&device->dev, - "Unable to request _OSC control " - "(_OSC support mask: 0x%02x)\n", flags); - } - - /* - * TBD: Need PCI interface for enumeration/configuration of roots. - */ - - mutex_lock(&acpi_pci_root_lock); - list_add_tail(&root->node, &acpi_pci_roots); - mutex_unlock(&acpi_pci_root_lock); - - /* - * Scan the Root Bridge - * -------------------- - * Must do this prior to any attempt to bind the root device, as the - * PCI namespace does not get created until this call is made (and - * thus the root bridge's pci_dev does not exist). - */ - root->bus = pci_acpi_scan_root(root); - if (!root->bus) { - printk(KERN_ERR PREFIX - "Bus %04x:%02x not present in PCI namespace\n", - root->segment, (unsigned int)root->secondary.start); - result = -ENODEV; - goto out_del_root; - } - - /* ASPM setting */ - if (is_osc_granted) { - if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) - pcie_clear_aspm(root->bus); - } else { - pr_info("ACPI _OSC control for PCIe not granted, " - "disabling ASPM\n"); - pcie_no_aspm(); + "Unable to request _OSC control " + "(_OSC support mask: 0x%02x)\n", flags); } pci_acpi_add_bus_pm_notifier(device, root->bus); -- cgit v1.2.1 From 6e0eda3c389887168455b92b6f7b48f552227067 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 14 Mar 2013 18:49:37 +0400 Subject: PCI: Don't try to disable Bus Master on disconnected PCI devices This is a fix for commit 7897e60227 ("PCI: Disable Bus Master unconditionally in pci_device_shutdown()"). Vivek reported that with this commit, kexec failed because none of his SATA disks came up. A ->shutdown() callback might put the device in D3cold, which means config space is no longer available. [bhelgaas: changelog] Link: https://lkml.org/lkml/2013/3/12/529 Reported-and-Tested-by: Vivek Goyal Signed-off-by: Konstantin Khlebnikov Signed-off-by: Bjorn Helgaas Cc: Rafael J. Wysocki --- drivers/pci/pci-driver.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 1fa1e482a999..79277fb36c6b 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -390,9 +390,10 @@ static void pci_device_shutdown(struct device *dev) /* * Turn off Bus Master bit on the device to tell it to not - * continue to do DMA + * continue to do DMA. Don't touch devices in D3cold or unknown states. */ - pci_clear_master(pci_dev); + if (pci_dev->current_state <= PCI_D3hot) + pci_clear_master(pci_dev); } #ifdef CONFIG_PM -- cgit v1.2.1 From 55985e15b80beb339d3e332f00a26003deff14e6 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 2 Apr 2013 01:29:29 +0200 Subject: ARM: mxs: Slow down the I2C clock speed Slow down the I2C clock speed on M28 and SPS1 as it turns out the I2C block in i.MX28 can not operate stable enough with the bus running at 400kHz. Note that the driver used by Freescale runs the bus at 250kHz when 400kHz speed is selected, but the mainline Linux kernel runs the bus at actual 400kHz and that's where it is occasionally unstable. Play safe and run the bus at 100kHz. Signed-off-by: Marek Vasut Cc: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-m28evk.dts | 1 - arch/arm/boot/dts/imx28-sps1.dts | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 6ce3d17c3a29..fd36e1cca104 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -152,7 +152,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index e6cde8aa7fff..6c6a5442800a 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -70,7 +70,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; rtc: rtc@51 { -- cgit v1.2.1 From 906b1c394d0906a154fbdc904ca506bceb515756 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Sat, 30 Mar 2013 10:23:12 +0000 Subject: netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths The bitmask used for the prefix mangling was being calculated incorrectly, leading to the wrong part of the address being replaced when the prefix length wasn't a multiple of 32. Signed-off-by: Matthias Schiffer Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/ip6t_NPT.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/netfilter/ip6t_NPT.c b/net/ipv6/netfilter/ip6t_NPT.c index 33608c610276..cb631143721c 100644 --- a/net/ipv6/netfilter/ip6t_NPT.c +++ b/net/ipv6/netfilter/ip6t_NPT.c @@ -57,7 +57,7 @@ static bool ip6t_npt_map_pfx(const struct ip6t_npt_tginfo *npt, if (pfx_len - i >= 32) mask = 0; else - mask = htonl(~((1 << (pfx_len - i)) - 1)); + mask = htonl((1 << (i - pfx_len + 32)) - 1); idx = i / 32; addr->s6_addr32[idx] &= mask; -- cgit v1.2.1 From e66cd5372d09d58002b2779a3bcdc564d6348883 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 3 Apr 2013 13:17:20 +0200 Subject: ACPI / BGRT: Don't let users configure BGRT on non X86 systems Fengguang Wu's 0-Day kernel build testing backend found the following build error for an allmodconfig build on ia64: drivers/built-in.o: In function `show_yoffset': >> bgrt.c:(.text+0xe5a71): undefined reference to `bgrt_tab' >> bgrt.c:(.text+0xe5a91): undefined reference to `bgrt_tab' drivers/built-in.o: In function `show_xoffset': >> bgrt.c:(.text+0xe5b51): undefined reference to `bgrt_tab' >> bgrt.c:(.text+0xe5b71): undefined reference to `bgrt_tab' drivers/built-in.o: In function `show_type': >> bgrt.c:(.text+0xe5c31): undefined reference to `bgrt_tab' drivers/built-in.o:bgrt.c:(.text+0xe5c51): more undefined references to `bgrt_tab' follow drivers/built-in.o: In function `bgrt_init': bgrt.c:(.init.text+0x8931): undefined reference to `bgrt_image' bgrt.c:(.init.text+0x8932): undefined reference to `bgrt_image_size' bgrt.c:(.init.text+0x8950): undefined reference to `bgrt_image' bgrt.c:(.init.text+0x8960): undefined reference to `bgrt_image_size' The problem is that all these undefined names are provided by arch/x86/platform/efi/efi-bgrt.c - which is obviously not available to the ia64 build. It doesn't seem useful to provide the BGRT support for Itanium (many systems are headless and have no graphics at all). So just don't let users configure this driver on non-X86 machines. Reported-by: Fengguang Wu Acked-by: H. Peter Anvin Signed-off-by: Tony Luck Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 92ed9692c47e..4bf68c8d4797 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -396,7 +396,7 @@ config ACPI_CUSTOM_METHOD config ACPI_BGRT bool "Boottime Graphics Resource Table support" - depends on EFI + depends on EFI && X86 help This driver adds support for exposing the ACPI Boottime Graphics Resource Table, which allows the operating system to obtain -- cgit v1.2.1 From 690a863ff03d9a29ace2b752b8f802fba78a842f Mon Sep 17 00:00:00 2001 From: Torstein Hegge Date: Tue, 26 Mar 2013 22:10:05 +0100 Subject: ALSA: usb: Work around CM6631 sample rate change bug The C-Media CM6631 USB receiver doesn't respond to changes in sample rate while the interface is active. The same behavior is observed in other UAC2 hardware like the VIA VT1731. Reset the interface after setting the sampling frequency on sample rate changes, to ensure that the sample rate set by snd_usb_init_sample_rate() is used. Otherwise, the device will try to use the sample rate of the previous stream, causing distorted sound on sample rate changes. The reset is performed for all UAC2 devices, as it should not affect a standards compliant device, but it is only necessary for C-Media CM6631, VIA VT1731 and possibly others. Failure to read sample rate from the device is not handled as an error in set_sample_rate_v2(), as (permanent or intermittent) failure to read sample rate isn't essential for a successful sample rate set. Signed-off-by: Torstein Hegge Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/clock.c | 45 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 35 insertions(+), 10 deletions(-) diff --git a/sound/usb/clock.c b/sound/usb/clock.c index 5e634a2eb282..9e2703a25156 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -253,7 +253,7 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, { struct usb_device *dev = chip->dev; unsigned char data[4]; - int err, crate; + int err, cur_rate, prev_rate; int clock = snd_usb_clock_find_source(chip, fmt->clock); if (clock < 0) @@ -266,6 +266,19 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, return -ENXIO; } + err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), + data, sizeof(data)); + if (err < 0) { + snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n", + dev->devnum, iface, fmt->altsetting); + prev_rate = 0; + } else { + prev_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24); + } + data[0] = rate; data[1] = rate >> 8; data[2] = rate >> 16; @@ -280,19 +293,31 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, return err; } - if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), - data, sizeof(data))) < 0) { + err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), + data, sizeof(data)); + if (err < 0) { snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n", dev->devnum, iface, fmt->altsetting); - return err; + cur_rate = 0; + } else { + cur_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24); } - crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24); - if (crate != rate) - snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate); + if (cur_rate != rate) { + snd_printd(KERN_WARNING + "current rate %d is different from the runtime rate %d\n", + cur_rate, rate); + } + + /* Some devices doesn't respond to sample rate changes while the + * interface is active. */ + if (rate != prev_rate) { + usb_set_interface(dev, iface, 0); + usb_set_interface(dev, iface, fmt->altsetting); + } return 0; } -- cgit v1.2.1 From 698613b63817f2f6ca79831cd1c37aae67025323 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Apr 2013 16:33:26 +0100 Subject: ARM: iWMMXt: always enable iWMMXt support with PJ4 CPUs Jason Cooper reports these build errors: arch/arm/kernel/built-in.o: In function `iwmmxt_do': /.../arch/arm/kernel/pj4-cp0.c:36: undefined reference to `iwmmxt_task_release' /.../arch/arm/kernel/pj4-cp0.c:40: undefined reference to `iwmmxt_task_switch' make: *** [vmlinux] Error 1 This is caused because the PJ4 code explicitly references the iWMMXt code, but doesn't require it to be built. Fix this by ensuring that iWMMXt is always enabled with PJ4. Reported-by: Jason Cooper Signed-off-by: Russell King --- arch/arm/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 13b739469c51..12ea3b3d49a9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1183,9 +1183,9 @@ config ARM_NR_BANKS default 8 config IWMMXT - bool "Enable iWMMXt support" + bool "Enable iWMMXt support" if !CPU_PJ4 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. -- cgit v1.2.1 From 6e7aceeb7c70b9ebad79bcfe91fcf738826e8e6d Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 25 Mar 2013 17:02:48 +0100 Subject: ARM: 7682/1: cache-l2x0: fix masking of RTL revision numbering and set_debug init Commit b8db6b8 (ARM: 7547/4: cache-l2x0: add support for Aurora L2 cache ctrl) moved the masking of the part ID which caused the RTL version to be lost. Commit 6248d06 (ARM: 7545/1: cache-l2x0: make outer_cache_fns a field of l2x0_of_data) changed how .set_debug is initialized. Both commits break commit 74ddcdb (ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier) which uses the RTL version to conditionally set .set_debug function pointer. Commit b8db6b8 also caused the printed cache ID to be missing the version information. Fix this by reverting how the part number is masked so the RTL version info is maintained. The cache-id-part DT property does not set the RTL bits so masking them should have no effect. Also, re-arrange the order of the function pointer init so the .set_debug function can be overridden. Reported-by: Paolo Pisati Signed-off-by: Rob Herring Cc: Gregory CLEMENT Cc: Yehuda Yitschak Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c2f37390308a..c465faca51b0 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id) int lockregs; int i; - switch (cache_id) { + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: lockregs = 8; break; @@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) if (cache_id_part_number_from_dt) cache_id = cache_id_part_number_from_dt; else - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID) - & L2X0_CACHE_ID_PART_MASK; + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; /* Determine the number of ways */ - switch (cache_id) { + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: if (aux & (1 << 16)) ways = 16; @@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = { .flush_all = l2x0_flush_all, .inv_all = l2x0_inv_all, .disable = l2x0_disable, - .set_debug = pl310_set_debug, }, }; @@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data->save(); of_init = true; - l2x0_init(l2x0_base, aux_val, aux_mask); - memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); + l2x0_init(l2x0_base, aux_val, aux_mask); return 0; } -- cgit v1.2.1 From 93dc68876b608da041fe40ed39424b0fcd5aa2fb Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 26 Mar 2013 23:35:04 +0100 Subject: ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations) On Cortex-A15 (r0p0..r3p2) the TLBI/DSB are not adequately shooting down all use of the old entries. This patch implements the erratum workaround which consists of: 1. Dummy TLBIMVAIS and DSB on the CPU doing the TLBI operation. 2. Send IPI to the CPUs that are running the same mm (and ASID) as the one being invalidated (or all the online CPUs for global pages). 3. CPU receiving the IPI executes a DMB and CLREX (part of the exception return code already). Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 10 ++++++ arch/arm/include/asm/highmem.h | 7 ++++ arch/arm/include/asm/mmu_context.h | 2 ++ arch/arm/include/asm/tlbflush.h | 15 +++++++++ arch/arm/kernel/smp_tlb.c | 66 ++++++++++++++++++++++++++++++++++++++ arch/arm/mm/context.c | 3 +- 6 files changed, 102 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 12ea3b3d49a9..1cacda426a0e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420 to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. +config ARM_ERRATA_798181 + bool "ARM errata: TLBI/DSB failure on Cortex-A15" + depends on CPU_V7 && SMP + help + On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not + adequately shooting down all use of the old entries. This + option enables the Linux kernel workaround for this erratum + which sends an IPI to the CPUs that are running the same ASID + as the one being invalidated. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 8c5e828f484d..91b99abe7a95 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page); #endif #endif +/* + * Needed to be able to broadcast the TLB invalidation for kmap. + */ +#ifdef CONFIG_ARM_ERRATA_798181 +#undef ARCH_NEEDS_KMAP_HIGH_GET +#endif + #ifdef ARCH_NEEDS_KMAP_HIGH_GET extern void *kmap_high_get(struct page *page); #else diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 863a6611323c..a7b85e0d0cc1 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm); void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); #define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; }) +DECLARE_PER_CPU(atomic64_t, active_asids); + #else /* !CONFIG_CPU_HAS_ASID */ #ifdef CONFIG_MMU diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 4db8c8820f0d..9e9c041358ca 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void) isb(); } +#ifdef CONFIG_ARM_ERRATA_798181 +static inline void dummy_flush_tlb_a15_erratum(void) +{ + /* + * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0. + */ + asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0)); + dsb(); +} +#else +static inline void dummy_flush_tlb_a15_erratum(void) +{ +} +#endif + /* * flush_pmd_entry * diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index bd0300531399..e82e1d248772 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -12,6 +12,7 @@ #include #include +#include /**********************************************************************/ @@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored) local_flush_bp_all(); } +#ifdef CONFIG_ARM_ERRATA_798181 +static int erratum_a15_798181(void) +{ + unsigned int midr = read_cpuid_id(); + + /* Cortex-A15 r0p0..r3p2 affected */ + if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) + return 0; + return 1; +} +#else +static int erratum_a15_798181(void) +{ + return 0; +} +#endif + +static void ipi_flush_tlb_a15_erratum(void *arg) +{ + dmb(); +} + +static void broadcast_tlb_a15_erratum(void) +{ + if (!erratum_a15_798181()) + return; + + dummy_flush_tlb_a15_erratum(); + smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum, + NULL, 1); +} + +static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm) +{ + int cpu; + cpumask_t mask = { CPU_BITS_NONE }; + + if (!erratum_a15_798181()) + return; + + dummy_flush_tlb_a15_erratum(); + for_each_online_cpu(cpu) { + if (cpu == smp_processor_id()) + continue; + /* + * We only need to send an IPI if the other CPUs are running + * the same ASID as the one being invalidated. There is no + * need for locking around the active_asids check since the + * switch_mm() function has at least one dmb() (as required by + * this workaround) in case a context switch happens on + * another CPU after the condition below. + */ + if (atomic64_read(&mm->context.id) == + atomic64_read(&per_cpu(active_asids, cpu))) + cpumask_set_cpu(cpu, &mask); + } + smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1); +} + void flush_tlb_all(void) { if (tlb_ops_need_broadcast()) on_each_cpu(ipi_flush_tlb_all, NULL, 1); else local_flush_tlb_all(); + broadcast_tlb_a15_erratum(); } void flush_tlb_mm(struct mm_struct *mm) @@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm) on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1); else local_flush_tlb_mm(mm); + broadcast_tlb_mm_a15_erratum(mm); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) @@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) &ta, 1); } else local_flush_tlb_page(vma, uaddr); + broadcast_tlb_mm_a15_erratum(vma->vm_mm); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr) on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); } else local_flush_tlb_kernel_page(kaddr); + broadcast_tlb_a15_erratum(); } void flush_tlb_range(struct vm_area_struct *vma, @@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma, &ta, 1); } else local_flush_tlb_range(vma, start, end); + broadcast_tlb_mm_a15_erratum(vma->vm_mm); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) @@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); } else local_flush_tlb_kernel_range(start, end); + broadcast_tlb_a15_erratum(); } void flush_bp_all(void) diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index a5a4b2bc42ba..2ac37372ef52 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock); static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION); static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS); -static DEFINE_PER_CPU(atomic64_t, active_asids); +DEFINE_PER_CPU(atomic64_t, active_asids); static DEFINE_PER_CPU(u64, reserved_asids); static cpumask_t tlb_flush_pending; @@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { local_flush_bp_all(); local_flush_tlb_all(); + dummy_flush_tlb_a15_erratum(); } atomic64_set(&per_cpu(active_asids, cpu), asid); -- cgit v1.2.1 From 6f3d90e55660ba42301b5e9c7eed332cc9f70fd7 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 28 Mar 2013 11:17:55 +0100 Subject: ARM: 7685/1: delay: use private ticks_per_jiffy field for timer-based delay ops Commit 70264367a243 ("ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock") fixed a problem with our timer-based delay loop, where loops_per_jiffy is scaled by cpufreq yet used directly by the timer delay ops. This patch fixes the problem in a more elegant way by keeping a private ticks_per_jiffy field in the delay ops, independent of loops_per_jiffy and therefore not subject to scaling. The loop-based delay continues to use loops_per_jiffy directly, as it should. Acked-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/delay.h | 2 +- arch/arm/kernel/smp.c | 3 --- arch/arm/lib/delay.c | 8 +++++--- 3 files changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index 720799fd3a81..dff714d886d5 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -24,7 +24,7 @@ extern struct arm_delay_ops { void (*delay)(unsigned long); void (*const_udelay)(unsigned long); void (*udelay)(unsigned long); - bool const_clock; + unsigned long ticks_per_jiffy; } arm_delay_ops; #define __delay(n) arm_delay_ops.delay(n) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 79078edbb9bc..1f2ccccaf009 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb, if (freq->flags & CPUFREQ_CONST_LOOPS) return NOTIFY_OK; - if (arm_delay_ops.const_clock) - return NOTIFY_OK; - if (!per_cpu(l_p_j_ref, cpu)) { per_cpu(l_p_j_ref, cpu) = per_cpu(cpu_data, cpu).loops_per_jiffy; diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 6b93f6a1a3c7..64dbfa57204a 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles) static void __timer_const_udelay(unsigned long xloops) { unsigned long long loops = xloops; - loops *= loops_per_jiffy; + loops *= arm_delay_ops.ticks_per_jiffy; __timer_delay(loops >> UDELAY_SHIFT); } @@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer) pr_info("Switching to timer-based delay loop\n"); delay_timer = timer; lpj_fine = timer->freq / HZ; - loops_per_jiffy = lpj_fine; + + /* cpufreq may scale loops_per_jiffy, so keep a private copy */ + arm_delay_ops.ticks_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; - arm_delay_ops.const_clock = true; + delay_calibrated = true; } else { pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); -- cgit v1.2.1 From b21e023ba4003fe4b5c32540e4aee5991c019e92 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 2 Apr 2013 22:11:46 +0100 Subject: ARM: 7689/1: add unwind annotations to ftrace asm Add unwind annotations to the ftrace assembly code so that the function tracer's stacktracing options (func_stack_trace, etc.) work when CONFIG_ARM_UNWIND is enabled. Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 3248cde504ed..fefd7f971437 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old) */ .macro mcount_enter +/* + * This pad compensates for the push {lr} at the call site. Note that we are + * unable to unwind through a function which does not otherwise save its lr. + */ + UNWIND(.pad #4) stmdb sp!, {r0-r3, lr} + UNWIND(.save {r0-r3, lr}) .endm .macro mcount_get_lr reg @@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old) .endm ENTRY(__gnu_mcount_nc) +UNWIND(.fnstart) #ifdef CONFIG_DYNAMIC_FTRACE mov ip, lr ldmia sp!, {lr} @@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc) #else __mcount #endif +UNWIND(.fnend) ENDPROC(__gnu_mcount_nc) #ifdef CONFIG_DYNAMIC_FTRACE ENTRY(ftrace_caller) +UNWIND(.fnstart) __ftrace_caller +UNWIND(.fnend) ENDPROC(ftrace_caller) #endif #ifdef CONFIG_FUNCTION_GRAPH_TRACER ENTRY(ftrace_graph_caller) +UNWIND(.fnstart) __ftrace_graph_caller +UNWIND(.fnend) ENDPROC(ftrace_graph_caller) #endif -- cgit v1.2.1 From 4e1db26a0b42e2b6e27c05d68adcc01709c2eed2 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 3 Apr 2013 12:24:45 +0100 Subject: ARM: 7690/1: mm: fix CONFIG_LPAE typos CONFIG_LPAE doesn't exist: the correct option is CONFIG_ARM_LPAE, so fix up the two typos under arch/arm/. The fix to head.S is slightly scary, but this is just for setting up an early io-mapping for the serial port when running on a big-endian, LPAE system. Since these systems don't exist in the wild (at least, I have no access to one outside of kvmtool, which doesn't provide a serial port suitable for earlyprintk), then we can revisit the code later if it causes any problems. Signed-off-by: Paul Bolle Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/head.S | 2 +- arch/arm/kernel/setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index e0eb9a1cae77..8bac553fe213 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -267,7 +267,7 @@ __create_page_tables: addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] -#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) +#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) sub r4, r4, #4 @ Fixup page table pointer @ for 64-bit descriptors #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index f3ac13f69b7a..d343a6c3a6d1 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -544,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size) size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); -#ifndef CONFIG_LPAE +#ifndef CONFIG_ARM_LPAE if (bank->start + size < bank->start) { printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " "32-bit physical address space\n", (long long)start); -- cgit v1.2.1 From 8cde7ad17e4f4ff8d12ff60dd09c0a291cb0b61c Mon Sep 17 00:00:00 2001 From: Zheng Liu Date: Wed, 3 Apr 2013 12:27:18 -0400 Subject: ext4: fix big-endian bugs which could cause fs corruptions When an extent was zeroed out, we forgot to do convert from cpu to le16. It could make us hit a BUG_ON when we try to write dirty pages out. So fix it. [ Also fix a bug found by Dmitry Monakhov where we were missing le32_to_cpu() calls in the new indirect punch hole code. There are a number of other big endian warnings found by static code analyzers, but we'll wait for the next merge window to fix them all up. These fixes are designed to be Obviously Correct by code inspection, and easy to demonstrate that it won't make any difference (and hence, won't introduce any bugs) on little endian architectures such as x86. --tytso ] Signed-off-by: Zheng Liu Signed-off-by: "Theodore Ts'o" Reported-by: CAI Qian Reported-by: Christian Kujau Cc: Dmitry Monakhov --- fs/ext4/extents.c | 11 +++++++---- fs/ext4/indirect.c | 4 ++-- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 56efcaadf848..9c6d06dcef8b 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2999,20 +2999,23 @@ static int ext4_split_extent_at(handle_t *handle, if (split_flag & EXT4_EXT_DATA_VALID1) { err = ext4_ext_zeroout(inode, ex2); zero_ex.ee_block = ex2->ee_block; - zero_ex.ee_len = ext4_ext_get_actual_len(ex2); + zero_ex.ee_len = cpu_to_le16( + ext4_ext_get_actual_len(ex2)); ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex2)); } else { err = ext4_ext_zeroout(inode, ex); zero_ex.ee_block = ex->ee_block; - zero_ex.ee_len = ext4_ext_get_actual_len(ex); + zero_ex.ee_len = cpu_to_le16( + ext4_ext_get_actual_len(ex)); ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex)); } } else { err = ext4_ext_zeroout(inode, &orig_ex); zero_ex.ee_block = orig_ex.ee_block; - zero_ex.ee_len = ext4_ext_get_actual_len(&orig_ex); + zero_ex.ee_len = cpu_to_le16( + ext4_ext_get_actual_len(&orig_ex)); ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(&orig_ex)); } @@ -3272,7 +3275,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, if (err) goto out; zero_ex.ee_block = ex->ee_block; - zero_ex.ee_len = ext4_ext_get_actual_len(ex); + zero_ex.ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex)); ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex)); err = ext4_ext_get_access(handle, inode, path + depth); diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c index b505a145a593..a04183127ef0 100644 --- a/fs/ext4/indirect.c +++ b/fs/ext4/indirect.c @@ -1539,9 +1539,9 @@ static int free_hole_blocks(handle_t *handle, struct inode *inode, blk = *i_data; if (level > 0) { ext4_lblk_t first2; - bh = sb_bread(inode->i_sb, blk); + bh = sb_bread(inode->i_sb, le32_to_cpu(blk)); if (!bh) { - EXT4_ERROR_INODE_BLOCK(inode, blk, + EXT4_ERROR_INODE_BLOCK(inode, le32_to_cpu(blk), "Read failure"); return -EIO; } -- cgit v1.2.1 From a9b977ecd3dbc5d4f0fe0b3d5c66d284859b1f2a Mon Sep 17 00:00:00 2001 From: Prathyush K Date: Tue, 2 Apr 2013 16:53:01 +0530 Subject: ASoC: Samsung: return error if drvdata is not set This patch fixes a possible crash in case drvdata for the secondary device is not set. Signed-off-by: Prathyush K Signed-off-by: Padmavathi Venna Signed-off-by: Mark Brown --- sound/soc/samsung/i2s.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index d7231e336a7c..f1fc06419560 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1107,6 +1107,10 @@ static int samsung_i2s_probe(struct platform_device *pdev) if (samsung_dai_type == TYPE_SEC) { sec_dai = dev_get_drvdata(&pdev->dev); + if (!sec_dai) { + dev_err(&pdev->dev, "Unable to get drvdata\n"); + return -EFAULT; + } snd_soc_register_dai(&sec_dai->pdev->dev, &sec_dai->i2s_dai_drv); asoc_dma_platform_register(&pdev->dev); -- cgit v1.2.1 From c6f9b1eb0e5df468891eff17f981b76c86f95f3a Mon Sep 17 00:00:00 2001 From: Prathyush K Date: Tue, 2 Apr 2013 16:53:02 +0530 Subject: ASoC: Samsung: set drvdata before adding secondary device Currently, a new platform device is created for secondary device by calling platform_device_register_resndata and then the drvdata is set for this device. The following patch has been added to driver core: "driver core: fix possible missing of device probe". This results in the added device getting probed immediately but the drvdata for the secondary device is not yet set. This patch removes the platform_device_register_resndata call and instead calls platform_device_alloc, platform_set_drvdata and platform_device_add which fixes the above issue. Signed-off-by: Prathyush K Signed-off-by: Padmavathi Venna Signed-off-by: Mark Brown --- sound/soc/samsung/i2s.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index f1fc06419560..6bbeb0bf1a73 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -972,6 +972,7 @@ static const struct snd_soc_dai_ops samsung_i2s_dai_ops = { static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec) { struct i2s_dai *i2s; + int ret; i2s = devm_kzalloc(&pdev->dev, sizeof(struct i2s_dai), GFP_KERNEL); if (i2s == NULL) @@ -996,15 +997,17 @@ static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec) i2s->i2s_dai_drv.capture.channels_max = 2; i2s->i2s_dai_drv.capture.rates = SAMSUNG_I2S_RATES; i2s->i2s_dai_drv.capture.formats = SAMSUNG_I2S_FMTS; + dev_set_drvdata(&i2s->pdev->dev, i2s); } else { /* Create a new platform_device for Secondary */ - i2s->pdev = platform_device_register_resndata(NULL, - "samsung-i2s-sec", -1, NULL, 0, NULL, 0); + i2s->pdev = platform_device_alloc("samsung-i2s-sec", -1); if (IS_ERR(i2s->pdev)) return NULL; - } - /* Pre-assign snd_soc_dai_set_drvdata */ - dev_set_drvdata(&i2s->pdev->dev, i2s); + platform_set_drvdata(i2s->pdev, i2s); + ret = platform_device_add(i2s->pdev); + if (ret < 0) + return NULL; + } return i2s; } -- cgit v1.2.1 From 5aa995e83ac7727b7705431e6eb2b317c59b95ba Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 3 Apr 2013 11:00:01 +0200 Subject: ASoC: tegra: Don't claim to support PCM pause and resume The tegra dmaengine driver does not support pausing and resuming a DMA stream. The tegra PCM driver still claims to support pause and resume though and implements them by stopping and restarting the stream. This is not what an application using pause/resume would expect. Usually applications have support for working around PCMs which do not support suspend and resume, so don't set the SNDRV_PCM_INFO_PAUSE and SNDRV_PCM_INFO_RESUME flags for the tegra PCM and use the default snd_dmaengine_pcm_trigger callback. Signed-off-by: Lars-Peter Clausen Reviewed-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Mark Brown --- sound/soc/tegra/tegra_pcm.c | 24 +----------------------- 1 file changed, 1 insertion(+), 23 deletions(-) diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c index c925ab0adeb6..5e2c55c5b255 100644 --- a/sound/soc/tegra/tegra_pcm.c +++ b/sound/soc/tegra/tegra_pcm.c @@ -43,8 +43,6 @@ static const struct snd_pcm_hardware tegra_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_INTERLEAVED, .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels_min = 2, @@ -127,26 +125,6 @@ static int tegra_pcm_hw_free(struct snd_pcm_substream *substream) return 0; } -static int tegra_pcm_trigger(struct snd_pcm_substream *substream, int cmd) -{ - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - return snd_dmaengine_pcm_trigger(substream, - SNDRV_PCM_TRIGGER_START); - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - return snd_dmaengine_pcm_trigger(substream, - SNDRV_PCM_TRIGGER_STOP); - default: - return -EINVAL; - } - return 0; -} - static int tegra_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma) { @@ -164,7 +142,7 @@ static struct snd_pcm_ops tegra_pcm_ops = { .ioctl = snd_pcm_lib_ioctl, .hw_params = tegra_pcm_hw_params, .hw_free = tegra_pcm_hw_free, - .trigger = tegra_pcm_trigger, + .trigger = snd_dmaengine_pcm_trigger, .pointer = snd_dmaengine_pcm_pointer, .mmap = tegra_pcm_mmap, }; -- cgit v1.2.1 From 21de979ecfc7b7f9442f8aea9a54b3ab670d0151 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 1 Apr 2013 12:44:45 -0700 Subject: mwifiex: complete last internal scan We are waiting on first scan command of internal scan request before association, so we should complete on last internal scan command response. Cc: # 3.8 Tested-by: Daniel Drake Tested-by: Marco Cesarano Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/scan.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index d215b4d3c51b..e7f6deaf715e 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1393,8 +1393,10 @@ int mwifiex_scan_networks(struct mwifiex_private *priv, queue_work(adapter->workqueue, &adapter->main_work); /* Perform internal scan synchronously */ - if (!priv->scan_request) + if (!priv->scan_request) { + dev_dbg(adapter->dev, "wait internal scan\n"); mwifiex_wait_queue_complete(adapter, cmd_node); + } } else { spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); @@ -1793,7 +1795,12 @@ check_next_scan: /* Need to indicate IOCTL complete */ if (adapter->curr_cmd->wait_q_enabled) { adapter->cmd_wait_q.status = 0; - mwifiex_complete_cmd(adapter, adapter->curr_cmd); + if (!priv->scan_request) { + dev_dbg(adapter->dev, + "complete internal scan\n"); + mwifiex_complete_cmd(adapter, + adapter->curr_cmd); + } } if (priv->report_scan_result) priv->report_scan_result = false; -- cgit v1.2.1 From 992f6068f09b3d711ffe247701287a2ee87842cb Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 2 Apr 2013 21:06:17 +0200 Subject: brcmfmac: fix tkip mic tx/rx ap swap bug. tx and rx michael tkip keys are always swapped in case being configured per mac. This is wrong for AP. The swap should only be done for STA mode. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 2af9c0f0798d..3bc47eaf167a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -1891,8 +1891,10 @@ static s32 brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev, u8 key_idx, const u8 *mac_addr, struct key_params *params) { + struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_wsec_key key; s32 err = 0; + u8 keybuf[8]; memset(&key, 0, sizeof(key)); key.index = (u32) key_idx; @@ -1916,8 +1918,9 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(CONN, "Setting the key index %d\n", key.index); memcpy(key.data, params->key, key.len); - if (params->cipher == WLAN_CIPHER_SUITE_TKIP) { - u8 keybuf[8]; + if ((ifp->vif->mode != WL_MODE_AP) && + (params->cipher == WLAN_CIPHER_SUITE_TKIP)) { + brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); memcpy(keybuf, &key.data[24], sizeof(keybuf)); memcpy(&key.data[24], &key.data[16], sizeof(keybuf)); memcpy(&key.data[16], keybuf, sizeof(keybuf)); @@ -2013,7 +2016,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, break; case WLAN_CIPHER_SUITE_TKIP: if (ifp->vif->mode != WL_MODE_AP) { - brcmf_dbg(CONN, "Swapping key\n"); + brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); memcpy(keybuf, &key.data[24], sizeof(keybuf)); memcpy(&key.data[24], &key.data[16], sizeof(keybuf)); memcpy(&key.data[16], keybuf, sizeof(keybuf)); -- cgit v1.2.1 From 5c33a9420499e384a5b7c2262b17fd608ec76472 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 2 Apr 2013 21:06:18 +0200 Subject: brcmfmac: fix stopping AP. on stop_ap the dongle was not properly shutdown. As a result it was not possible to restart AP or STA after AP operation without restarting the device. This patch will fix that. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 25 +++++++++++++--------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 3bc47eaf167a..b9dbf2c0f63c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3827,8 +3827,9 @@ exit: static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - s32 err = -EPERM; + s32 err; struct brcmf_fil_bss_enable_le bss_enable; + struct brcmf_join_params join_params; brcmf_dbg(TRACE, "Enter\n"); @@ -3836,16 +3837,21 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) /* Due to most likely deauths outstanding we sleep */ /* first to make sure they get processed by fw. */ msleep(400); - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0); - if (err < 0) { - brcmf_err("setting AP mode failed %d\n", err); - goto exit; - } + + memset(&join_params, 0, sizeof(join_params)); + err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, + &join_params, sizeof(join_params)); + if (err < 0) + brcmf_err("SET SSID error (%d)\n", err); err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); - if (err < 0) { + if (err < 0) brcmf_err("BRCMF_C_UP error %d\n", err); - goto exit; - } + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0); + if (err < 0) + brcmf_err("setting AP mode failed %d\n", err); + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 0); + if (err < 0) + brcmf_err("setting INFRA mode failed %d\n", err); } else { bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); bss_enable.enable = cpu_to_le32(0); @@ -3858,7 +3864,6 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); -exit: return err; } -- cgit v1.2.1 From c5bf53a826d22c284e6e1d309d32c388684e26a7 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 2 Apr 2013 21:06:19 +0200 Subject: brcmfmac: fix returning cipher_suite for get_key operation. When multiple cipher suites have been programmed then the lowest suite is to be retured. This fixes issue when AP mode is using CCMP and TKIP WPA combination where rekeying will fail. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index b9dbf2c0f63c..ec46ffff5409 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2121,8 +2121,7 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, err = -EAGAIN; goto done; } - switch (wsec & ~SES_OW_ENABLED) { - case WEP_ENABLED: + if (wsec & WEP_ENABLED) { sec = &profile->sec; if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP40) { params.cipher = WLAN_CIPHER_SUITE_WEP40; @@ -2131,16 +2130,13 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, params.cipher = WLAN_CIPHER_SUITE_WEP104; brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n"); } - break; - case TKIP_ENABLED: + } else if (wsec & TKIP_ENABLED) { params.cipher = WLAN_CIPHER_SUITE_TKIP; brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n"); - break; - case AES_ENABLED: + } else if (wsec & AES_ENABLED) { params.cipher = WLAN_CIPHER_SUITE_AES_CMAC; brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n"); - break; - default: + } else { brcmf_err("Invalid algo (0x%x)\n", wsec); err = -EINVAL; goto done; -- cgit v1.2.1 From 3eaa956c5b18b9c955ae5a4e6e6909cae23f38e0 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Tue, 2 Apr 2013 21:06:20 +0200 Subject: brcmfmac: do not proceed if fail to download nvram to dongle Nvram contains critical initialization parameter for firmware to run. Host driver should not proceed if nvram fails to be downloaded to dongle. Reviewed-by: Piotr Haber Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 4469321c0eb3..35fc68be158d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -3317,15 +3317,15 @@ static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) goto err; } - /* External image takes precedence if specified */ if (brcmf_sdbrcm_download_code_file(bus)) { brcmf_err("dongle image file download failed\n"); goto err; } - /* External nvram takes precedence if specified */ - if (brcmf_sdbrcm_download_nvram(bus)) + if (brcmf_sdbrcm_download_nvram(bus)) { brcmf_err("dongle nvram file download failed\n"); + goto err; + } /* Take arm out of reset */ if (brcmf_sdbrcm_download_state(bus, false)) { -- cgit v1.2.1 From f50b1cd37446ad32c432f0f73bbed67a1c076eae Mon Sep 17 00:00:00 2001 From: Robert Shade Date: Tue, 2 Apr 2013 19:52:45 -0400 Subject: ath9k: Re-enable interrupts after a channel change failure ath_complete_reset will not be called if ath9k_hw_reset is unsuccessful, so we need to re-enable intertupts to balence the previous ath_prepare_reset call. Also schedule a reset as a best effort method to recover the chip from whatever state caused the channel change failure. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=55771 Signed-off-by: Robert Shade Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6e66f9c6782b..988372d218a4 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -280,6 +280,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) if (r) { ath_err(common, "Unable to reset channel, reset status %d\n", r); + + ath9k_hw_enable_interrupts(ah); + ath9k_queue_reset(sc, RESET_TYPE_BB_HANG); + goto out; } -- cgit v1.2.1 From 5448bd8ca139bf8f82b93e10acbc2691cd983a45 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 2 Apr 2013 18:39:53 +0200 Subject: tty: Documentation: fix a path in a DocBook template A wrong path to a driver breaks DocBook built. Signed-off-by: Guennadi Liakhovetski Acked-by: Randy Dunlap Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/device-drivers.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 7514dbf0a679..c36892c072da 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -227,7 +227,7 @@ X!Isound/sound_firmware.c 16x50 UART Driver !Edrivers/tty/serial/serial_core.c -!Edrivers/tty/serial/8250/8250.c +!Edrivers/tty/serial/8250/8250_core.c -- cgit v1.2.1 From 83589b30f1e1dc9898986293c9336b8ce1705dec Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Mon, 18 Feb 2013 12:56:28 -0700 Subject: rt2x00: rt2x00pci_regbusy_read() - only print register access failure once BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: "John W. Linville" Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Tim Gardner Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index a0c8caef3b0a..b1c673ecada1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -52,8 +52,8 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, udelay(REGISTER_BUSY_DELAY); } - ERROR(rt2x00dev, "Indirect register access failed: " - "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + printk_once(KERN_ERR "%s() Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg); *reg = ~0; return 0; -- cgit v1.2.1 From 69a2bac8984c4e6dba78b330ed183fd580c65e99 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 29 Mar 2013 15:52:27 +0100 Subject: rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCs The rt2800pci driver supports the built-in wireless MAC of the Ralink RT3x5x SoCs. However building the driver for these SoCs leads to the following error: LD init/built-in.o drivers/built-in.o: In function `rt2800pci_rxdone_tasklet': <...>/drivers/net/wireless/rt2x00/rt2800pci.c:1012: undefined reference to `rt2x00pci_rxdone' drivers/built-in.o:(.rodata+0x4780): undefined reference to `rt2x00pci_initialize' drivers/built-in.o:(.rodata+0x4784): undefined reference to `rt2x00pci_uninitialize' drivers/built-in.o:(.rodata+0x47bc): undefined reference to `rt2x00pci_flush_queue' drivers/built-in.o:(.rodata+0x4818): undefined reference to `rt2x00pci_regbusy_read' make[5]: *** [vmlinux] Error 1 The missing functions are provided by the rt2x00pci module. This module is only selected by the rt2800pci driver if PCI support is enabled in the kernel, because some parts of the rt2x00pci code depends on PCI support. PCI support is not available on the RT3x5x SoCs because those have no PCI host controller at all. Move the non PCI specific code from rt2x00pci into a separate module. This makes it possible to use that code even if PCI support is disabled. The affected functions are used by all of the rt2x00 PCI drivers so select the new module for those drivers. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 7 + drivers/net/wireless/rt2x00/Makefile | 1 + drivers/net/wireless/rt2x00/rt2400pci.c | 1 + drivers/net/wireless/rt2x00/rt2500pci.c | 1 + drivers/net/wireless/rt2x00/rt2800pci.c | 1 + drivers/net/wireless/rt2x00/rt2x00mmio.c | 216 +++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00mmio.h | 119 +++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00pci.c | 176 ------------------------- drivers/net/wireless/rt2x00/rt2x00pci.h | 88 ------------- drivers/net/wireless/rt2x00/rt61pci.c | 1 + 10 files changed, 347 insertions(+), 264 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2x00mmio.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00mmio.h diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 2bf4efa33186..76cd47eb901e 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -20,6 +20,7 @@ if RT2X00 config RT2400PCI tristate "Ralink rt2400 (PCI/PCMCIA) support" depends on PCI + select RT2X00_LIB_MMIO select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -31,6 +32,7 @@ config RT2400PCI config RT2500PCI tristate "Ralink rt2500 (PCI/PCMCIA) support" depends on PCI + select RT2X00_LIB_MMIO select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -43,6 +45,7 @@ config RT61PCI tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI + select RT2X00_LIB_MMIO select RT2X00_LIB_FIRMWARE select RT2X00_LIB_CRYPTO select CRC_ITU_T @@ -57,6 +60,7 @@ config RT2800PCI tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support" depends on PCI || SOC_RT288X || SOC_RT305X select RT2800_LIB + select RT2X00_LIB_MMIO select RT2X00_LIB_PCI if PCI select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X select RT2X00_LIB_FIRMWARE @@ -185,6 +189,9 @@ endif config RT2800_LIB tristate +config RT2X00_LIB_MMIO + tristate + config RT2X00_LIB_PCI tristate select RT2X00_LIB diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 349d5b8284a4..f069d8bc5b67 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -9,6 +9,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o +obj-$(CONFIG_RT2X00_LIB_MMIO) += rt2x00mmio.o obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 221beaaa83f1..dcfb54e0c516 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -34,6 +34,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt2400pci.h" diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 39edc59e8d03..e1d2dc9ed28a 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -34,6 +34,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt2500pci.h" diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index ded73da4de0b..ba5a05625aaa 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -41,6 +41,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt2x00soc.h" #include "rt2800lib.h" diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.c b/drivers/net/wireless/rt2x00/rt2x00mmio.c new file mode 100644 index 000000000000..d84a680ba0c9 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00mmio.c @@ -0,0 +1,216 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00mmio + Abstract: rt2x00 generic mmio device routines. + */ + +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00mmio.h" + +/* + * Register access. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg) +{ + unsigned int i; + + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return 0; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, offset, reg); + if (!rt2x00_get_field32(*reg, field)) + return 1; + udelay(REGISTER_BUSY_DELAY); + } + + printk_once(KERN_ERR "%s() Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg); + *reg = ~0; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read); + +bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue = rt2x00dev->rx; + struct queue_entry *entry; + struct queue_entry_priv_pci *entry_priv; + struct skb_frame_desc *skbdesc; + int max_rx = 16; + + while (--max_rx) { + entry = rt2x00queue_get_entry(queue, Q_INDEX); + entry_priv = entry->priv_data; + + if (rt2x00dev->ops->lib->get_entry_state(entry)) + break; + + /* + * Fill in desc fields of the skb descriptor + */ + skbdesc = get_skb_frame_desc(entry->skb); + skbdesc->desc = entry_priv->desc; + skbdesc->desc_len = entry->queue->desc_size; + + /* + * DMA is already done, notify rt2x00lib that + * it finished successfully. + */ + rt2x00lib_dmastart(entry); + rt2x00lib_dmadone(entry); + + /* + * Send the frame to rt2x00lib for further processing. + */ + rt2x00lib_rxdone(entry, GFP_ATOMIC); + } + + return !max_rx; +} +EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); + +void rt2x00pci_flush_queue(struct data_queue *queue, bool drop) +{ + unsigned int i; + + for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++) + msleep(10); +} +EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue); + +/* + * Device initialization handlers. + */ +static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + struct queue_entry_priv_pci *entry_priv; + void *addr; + dma_addr_t dma; + unsigned int i; + + /* + * Allocate DMA memory for descriptor and buffer. + */ + addr = dma_alloc_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + &dma, GFP_KERNEL); + if (!addr) + return -ENOMEM; + + memset(addr, 0, queue->limit * queue->desc_size); + + /* + * Initialize all queue entries to contain valid addresses. + */ + for (i = 0; i < queue->limit; i++) { + entry_priv = queue->entries[i].priv_data; + entry_priv->desc = addr + i * queue->desc_size; + entry_priv->desc_dma = dma + i * queue->desc_size; + } + + return 0; +} + +static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + struct queue_entry_priv_pci *entry_priv = + queue->entries[0].priv_data; + + if (entry_priv->desc) + dma_free_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + entry_priv->desc, entry_priv->desc_dma); + entry_priv->desc = NULL; +} + +int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + int status; + + /* + * Allocate DMA + */ + queue_for_each(rt2x00dev, queue) { + status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue); + if (status) + goto exit; + } + + /* + * Register interrupt handler. + */ + status = request_irq(rt2x00dev->irq, + rt2x00dev->ops->lib->irq_handler, + IRQF_SHARED, rt2x00dev->name, rt2x00dev); + if (status) { + ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", + rt2x00dev->irq, status); + goto exit; + } + + return 0; + +exit: + queue_for_each(rt2x00dev, queue) + rt2x00pci_free_queue_dma(rt2x00dev, queue); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00pci_initialize); + +void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + + /* + * Free irq line. + */ + free_irq(rt2x00dev->irq, rt2x00dev); + + /* + * Free DMA + */ + queue_for_each(rt2x00dev, queue) + rt2x00pci_free_queue_dma(rt2x00dev, queue); +} +EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize); + +/* + * rt2x00mmio module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 mmio library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.h b/drivers/net/wireless/rt2x00/rt2x00mmio.h new file mode 100644 index 000000000000..4ecaf60175bf --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00mmio.h @@ -0,0 +1,119 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00mmio + Abstract: Data structures for the rt2x00mmio module. + */ + +#ifndef RT2X00MMIO_H +#define RT2X00MMIO_H + +#include + +/* + * Register access. + */ +static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + *value = readl(rt2x00dev->csr.base + offset); +} + +static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + memcpy_fromio(value, rt2x00dev->csr.base + offset, length); +} + +static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + writel(value, rt2x00dev->csr.base + offset); +} + +static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, + const u32 length) +{ + __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2); +} + +/** + * rt2x00pci_regbusy_read - Read from register with busy check + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @field: Field to check if register is busy + * @reg: Pointer to where register contents should be stored + * + * This function will read the given register, and checks if the + * register is busy. If it is, it will sleep for a couple of + * microseconds before reading the register again. If the register + * is not read after a certain timeout, this function will return + * FALSE. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg); + +/** + * struct queue_entry_priv_pci: Per entry PCI specific information + * + * @desc: Pointer to device descriptor + * @desc_dma: DMA pointer to &desc. + * @data: Pointer to device's entry memory. + * @data_dma: DMA pointer to &data. + */ +struct queue_entry_priv_pci { + __le32 *desc; + dma_addr_t desc_dma; +}; + +/** + * rt2x00pci_rxdone - Handle RX done events + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * + * Returns true if there are still rx frames pending and false if all + * pending rx frames were processed. + */ +bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); + +/** + * rt2x00pci_flush_queue - Flush data queue + * @queue: Data queue to stop + * @drop: True to drop all pending frames. + * + * This will wait for a maximum of 100ms, waiting for the queues + * to become empty. + */ +void rt2x00pci_flush_queue(struct data_queue *queue, bool drop); + +/* + * Device initialization handlers. + */ +int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev); +void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev); + +#endif /* RT2X00MMIO_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index b1c673ecada1..e87865e33113 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -32,182 +32,6 @@ #include "rt2x00.h" #include "rt2x00pci.h" -/* - * Register access. - */ -int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg) -{ - unsigned int i; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, offset, reg); - if (!rt2x00_get_field32(*reg, field)) - return 1; - udelay(REGISTER_BUSY_DELAY); - } - - printk_once(KERN_ERR "%s() Indirect register access failed: " - "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg); - *reg = ~0; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read); - -bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue = rt2x00dev->rx; - struct queue_entry *entry; - struct queue_entry_priv_pci *entry_priv; - struct skb_frame_desc *skbdesc; - int max_rx = 16; - - while (--max_rx) { - entry = rt2x00queue_get_entry(queue, Q_INDEX); - entry_priv = entry->priv_data; - - if (rt2x00dev->ops->lib->get_entry_state(entry)) - break; - - /* - * Fill in desc fields of the skb descriptor - */ - skbdesc = get_skb_frame_desc(entry->skb); - skbdesc->desc = entry_priv->desc; - skbdesc->desc_len = entry->queue->desc_size; - - /* - * DMA is already done, notify rt2x00lib that - * it finished successfully. - */ - rt2x00lib_dmastart(entry); - rt2x00lib_dmadone(entry); - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, GFP_ATOMIC); - } - - return !max_rx; -} -EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); - -void rt2x00pci_flush_queue(struct data_queue *queue, bool drop) -{ - unsigned int i; - - for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++) - msleep(10); -} -EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue); - -/* - * Device initialization handlers. - */ -static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) -{ - struct queue_entry_priv_pci *entry_priv; - void *addr; - dma_addr_t dma; - unsigned int i; - - /* - * Allocate DMA memory for descriptor and buffer. - */ - addr = dma_alloc_coherent(rt2x00dev->dev, - queue->limit * queue->desc_size, - &dma, GFP_KERNEL); - if (!addr) - return -ENOMEM; - - memset(addr, 0, queue->limit * queue->desc_size); - - /* - * Initialize all queue entries to contain valid addresses. - */ - for (i = 0; i < queue->limit; i++) { - entry_priv = queue->entries[i].priv_data; - entry_priv->desc = addr + i * queue->desc_size; - entry_priv->desc_dma = dma + i * queue->desc_size; - } - - return 0; -} - -static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) -{ - struct queue_entry_priv_pci *entry_priv = - queue->entries[0].priv_data; - - if (entry_priv->desc) - dma_free_coherent(rt2x00dev->dev, - queue->limit * queue->desc_size, - entry_priv->desc, entry_priv->desc_dma); - entry_priv->desc = NULL; -} - -int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - int status; - - /* - * Allocate DMA - */ - queue_for_each(rt2x00dev, queue) { - status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue); - if (status) - goto exit; - } - - /* - * Register interrupt handler. - */ - status = request_irq(rt2x00dev->irq, - rt2x00dev->ops->lib->irq_handler, - IRQF_SHARED, rt2x00dev->name, rt2x00dev); - if (status) { - ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", - rt2x00dev->irq, status); - goto exit; - } - - return 0; - -exit: - queue_for_each(rt2x00dev, queue) - rt2x00pci_free_queue_dma(rt2x00dev, queue); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00pci_initialize); - -void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - /* - * Free irq line. - */ - free_irq(rt2x00dev->irq, rt2x00dev); - - /* - * Free DMA - */ - queue_for_each(rt2x00dev, queue) - rt2x00pci_free_queue_dma(rt2x00dev, queue); -} -EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize); - /* * PCI driver handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index e2c99f2b9a14..60d90b20f8b9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -35,94 +35,6 @@ */ #define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) -/* - * Register access. - */ -static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - *value = readl(rt2x00dev->csr.base + offset); -} - -static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - memcpy_fromio(value, rt2x00dev->csr.base + offset, length); -} - -static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - writel(value, rt2x00dev->csr.base + offset); -} - -static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, - const u32 length) -{ - __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2); -} - -/** - * rt2x00pci_regbusy_read - Read from register with busy check - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @field: Field to check if register is busy - * @reg: Pointer to where register contents should be stored - * - * This function will read the given register, and checks if the - * register is busy. If it is, it will sleep for a couple of - * microseconds before reading the register again. If the register - * is not read after a certain timeout, this function will return - * FALSE. - */ -int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg); - -/** - * struct queue_entry_priv_pci: Per entry PCI specific information - * - * @desc: Pointer to device descriptor - * @desc_dma: DMA pointer to &desc. - * @data: Pointer to device's entry memory. - * @data_dma: DMA pointer to &data. - */ -struct queue_entry_priv_pci { - __le32 *desc; - dma_addr_t desc_dma; -}; - -/** - * rt2x00pci_rxdone - Handle RX done events - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * - * Returns true if there are still rx frames pending and false if all - * pending rx frames were processed. - */ -bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00pci_flush_queue - Flush data queue - * @queue: Data queue to stop - * @drop: True to drop all pending frames. - * - * This will wait for a maximum of 100ms, waiting for the queues - * to become empty. - */ -void rt2x00pci_flush_queue(struct data_queue *queue, bool drop); - -/* - * Device initialization handlers. - */ -int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev); - /* * PCI driver handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f95792cfcf89..9e3c8ff53e3f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -35,6 +35,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt61pci.h" -- cgit v1.2.1 From 6d4f0139d642c45411a47879325891ce2a7c164a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 27 Feb 2013 11:41:41 -0800 Subject: misc/vmw_vmci: Add dependency on CONFIG_NET Building the vmw_vmci driver with CONFIG_NET undefined results in: drivers/built-in.o: In function `__qp_memcpy_from_queue.isra.13': vmci_queue_pair.c:(.text+0x1671a8): undefined reference to `memcpy_toiovec' drivers/built-in.o: In function `__qp_memcpy_to_queue.isra.14': vmci_queue_pair.c:(.text+0x167341): undefined reference to `memcpy_fromiovec' make[1]: [vmlinux] Error 1 (ignored) since memcpy_toiovec and memcpy_fromiovec are defined in the networking code. Add the missing dependency. Signed-off-by: Guenter Roeck Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vmw_vmci/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig index 39c2ecadb273..ea98f7e9ccd1 100644 --- a/drivers/misc/vmw_vmci/Kconfig +++ b/drivers/misc/vmw_vmci/Kconfig @@ -4,7 +4,7 @@ config VMWARE_VMCI tristate "VMware VMCI Driver" - depends on X86 && PCI + depends on X86 && PCI && NET help This is VMware's Virtual Machine Communication Interface. It enables high-speed communication between host and guest in a virtual -- cgit v1.2.1 From c678ef5286ddb5cf70384ad5af286b0afc9b73e1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 3 Apr 2013 21:53:57 +0200 Subject: block: avoid using uninitialized value in from queue_var_store As found by gcc-4.8, the QUEUE_SYSFS_BIT_FNS macro creates functions that use a value generated by queue_var_store independent of whether that value was set or not. block/blk-sysfs.c: In function 'queue_store_nonrot': block/blk-sysfs.c:244:385: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] Unlike most other such warnings, this one is not a false positive, writing any non-number string into the sysfs files indeed has an undefined result, rather than returning an error. Signed-off-by: Arnd Bergmann Signed-off-by: Jens Axboe --- block/blk-sysfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 6206a934eb8c..5efc5a647183 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -229,6 +229,8 @@ queue_store_##name(struct request_queue *q, const char *page, size_t count) \ unsigned long val; \ ssize_t ret; \ ret = queue_var_store(&val, page, count); \ + if (ret < 0) \ + return ret; \ if (neg) \ val = !val; \ \ -- cgit v1.2.1 From d0d096b1d8b97172cee953f1a00b7d4379d398da Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 3 Apr 2013 19:53:07 +0530 Subject: mtip32xx: recovery from command timeout To recover from command timeouts, reset the device. In addition to that improved timeout handling of PIO commands. Signed-off-by: Sam Bradshaw Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 177 +++++++++++++++++++------------------- 1 file changed, 87 insertions(+), 90 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 92250af84e7d..30f233634650 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -243,40 +243,31 @@ static inline void release_slot(struct mtip_port *port, int tag) /* * Reset the HBA (without sleeping) * - * Just like hba_reset, except does not call sleep, so can be - * run from interrupt/tasklet context. - * * @dd Pointer to the driver data structure. * * return value * 0 The reset was successful. * -1 The HBA Reset bit did not clear. */ -static int hba_reset_nosleep(struct driver_data *dd) +static int mtip_hba_reset(struct driver_data *dd) { unsigned long timeout; - /* Chip quirk: quiesce any chip function */ - mdelay(10); - /* Set the reset bit */ writel(HOST_RESET, dd->mmio + HOST_CTL); /* Flush */ readl(dd->mmio + HOST_CTL); - /* - * Wait 10ms then spin for up to 1 second - * waiting for reset acknowledgement - */ - timeout = jiffies + msecs_to_jiffies(1000); - mdelay(10); - while ((readl(dd->mmio + HOST_CTL) & HOST_RESET) - && time_before(jiffies, timeout)) - mdelay(1); + /* Spin for up to 2 seconds, waiting for reset acknowledgement */ + timeout = jiffies + msecs_to_jiffies(2000); + do { + mdelay(10); + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) + return -1; - if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) - return -1; + } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET) + && time_before(jiffies, timeout)); if (readl(dd->mmio + HOST_CTL) & HOST_RESET) return -1; @@ -481,7 +472,7 @@ static void mtip_restart_port(struct mtip_port *port) dev_warn(&port->dd->pdev->dev, "PxCMD.CR not clear, escalating reset\n"); - if (hba_reset_nosleep(port->dd)) + if (mtip_hba_reset(port->dd)) dev_err(&port->dd->pdev->dev, "HBA reset escalation failed.\n"); @@ -527,6 +518,26 @@ static void mtip_restart_port(struct mtip_port *port) } +static int mtip_device_reset(struct driver_data *dd) +{ + int rv = 0; + + if (mtip_check_surprise_removal(dd->pdev)) + return 0; + + if (mtip_hba_reset(dd) < 0) + rv = -EFAULT; + + mdelay(1); + mtip_init_port(dd->port); + mtip_start_port(dd->port); + + /* Enable interrupts on the HBA. */ + writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, + dd->mmio + HOST_CTL); + return rv; +} + /* * Helper function for tag logging */ @@ -632,7 +643,7 @@ static void mtip_timeout_function(unsigned long int data) if (cmdto_cnt) { print_tags(port->dd, "timed out", tagaccum, cmdto_cnt); if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { - mtip_restart_port(port); + mtip_device_reset(port->dd); wake_up_interruptible(&port->svc_wait); } clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); @@ -1283,11 +1294,11 @@ static int mtip_exec_internal_command(struct mtip_port *port, int rv = 0, ready2go = 1; struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL]; unsigned long to; + struct driver_data *dd = port->dd; /* Make sure the buffer is 8 byte aligned. This is asic specific. */ if (buffer & 0x00000007) { - dev_err(&port->dd->pdev->dev, - "SG buffer is not 8 byte aligned\n"); + dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n"); return -EFAULT; } @@ -1300,23 +1311,21 @@ static int mtip_exec_internal_command(struct mtip_port *port, mdelay(100); } while (time_before(jiffies, to)); if (!ready2go) { - dev_warn(&port->dd->pdev->dev, + dev_warn(&dd->pdev->dev, "Internal cmd active. new cmd [%02X]\n", fis->command); return -EBUSY; } set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); port->ic_pause_timer = 0; - if (fis->command == ATA_CMD_SEC_ERASE_UNIT) - clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); - else if (fis->command == ATA_CMD_DOWNLOAD_MICRO) - clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); if (atomic == GFP_KERNEL) { if (fis->command != ATA_CMD_STANDBYNOW1) { /* wait for io to complete if non atomic */ if (mtip_quiesce_io(port, 5000) < 0) { - dev_warn(&port->dd->pdev->dev, + dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n"); release_slot(port, MTIP_TAG_INTERNAL); clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); @@ -1361,58 +1370,84 @@ static int mtip_exec_internal_command(struct mtip_port *port, /* Issue the command to the hardware */ mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL); - /* Poll if atomic, wait_for_completion otherwise */ if (atomic == GFP_KERNEL) { /* Wait for the command to complete or timeout. */ - if (wait_for_completion_timeout( + if (wait_for_completion_interruptible_timeout( &wait, - msecs_to_jiffies(timeout)) == 0) { - dev_err(&port->dd->pdev->dev, - "Internal command did not complete [%d] " - "within timeout of %lu ms\n", - atomic, timeout); - if (mtip_check_surprise_removal(port->dd->pdev) || + msecs_to_jiffies(timeout)) <= 0) { + if (rv == -ERESTARTSYS) { /* interrupted */ + dev_err(&dd->pdev->dev, + "Internal command [%02X] was interrupted after %lu ms\n", + fis->command, timeout); + rv = -EINTR; + goto exec_ic_exit; + } else if (rv == 0) /* timeout */ + dev_err(&dd->pdev->dev, + "Internal command did not complete [%02X] within timeout of %lu ms\n", + fis->command, timeout); + else + dev_err(&dd->pdev->dev, + "Internal command [%02X] wait returned code [%d] after %lu ms - unhandled\n", + fis->command, rv, timeout); + + if (mtip_check_surprise_removal(dd->pdev) || test_bit(MTIP_DDF_REMOVE_PENDING_BIT, - &port->dd->dd_flag)) { + &dd->dd_flag)) { + dev_err(&dd->pdev->dev, + "Internal command [%02X] wait returned due to SR\n", + fis->command); rv = -ENXIO; goto exec_ic_exit; } + mtip_device_reset(dd); /* recover from timeout issue */ rv = -EAGAIN; + goto exec_ic_exit; } } else { + u32 hba_stat, port_stat; + /* Spin for checking if command still outstanding */ timeout = jiffies + msecs_to_jiffies(timeout); while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL)) && time_before(jiffies, timeout)) { - if (mtip_check_surprise_removal(port->dd->pdev)) { + if (mtip_check_surprise_removal(dd->pdev)) { rv = -ENXIO; goto exec_ic_exit; } if ((fis->command != ATA_CMD_STANDBYNOW1) && test_bit(MTIP_DDF_REMOVE_PENDING_BIT, - &port->dd->dd_flag)) { + &dd->dd_flag)) { rv = -ENXIO; goto exec_ic_exit; } - if (readl(port->mmio + PORT_IRQ_STAT) & PORT_IRQ_ERR) { - atomic_inc(&int_cmd->active); /* error */ - break; + port_stat = readl(port->mmio + PORT_IRQ_STAT); + if (!port_stat) + continue; + + if (port_stat & PORT_IRQ_ERR) { + dev_err(&dd->pdev->dev, + "Internal command [%02X] failed\n", + fis->command); + mtip_device_reset(dd); + rv = -EIO; + goto exec_ic_exit; + } else { + writel(port_stat, port->mmio + PORT_IRQ_STAT); + hba_stat = readl(dd->mmio + HOST_IRQ_STAT); + if (hba_stat) + writel(hba_stat, + dd->mmio + HOST_IRQ_STAT); } + break; } } - if (atomic_read(&int_cmd->active) > 1) { - dev_err(&port->dd->pdev->dev, - "Internal command [%02X] failed\n", fis->command); - rv = -EIO; - } if (readl(port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL)) { rv = -ENXIO; - if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, - &port->dd->dd_flag)) { - mtip_restart_port(port); + if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { + mtip_device_reset(dd); rv = -EAGAIN; } } @@ -1724,7 +1759,8 @@ static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, * -EINVAL Invalid parameters passed in, trim not supported * -EIO Error submitting trim request to hw */ -static int mtip_send_trim(struct driver_data *dd, unsigned int lba, unsigned int len) +static int mtip_send_trim(struct driver_data *dd, unsigned int lba, + unsigned int len) { int i, rv = 0; u64 tlba, tlen, sect_left; @@ -1810,45 +1846,6 @@ static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors) return (bool) !!port->identify_valid; } -/* - * Reset the HBA. - * - * Resets the HBA by setting the HBA Reset bit in the Global - * HBA Control register. After setting the HBA Reset bit the - * function waits for 1 second before reading the HBA Reset - * bit to make sure it has cleared. If HBA Reset is not clear - * an error is returned. Cannot be used in non-blockable - * context. - * - * @dd Pointer to the driver data structure. - * - * return value - * 0 The reset was successful. - * -1 The HBA Reset bit did not clear. - */ -static int mtip_hba_reset(struct driver_data *dd) -{ - mtip_deinit_port(dd->port); - - /* Set the reset bit */ - writel(HOST_RESET, dd->mmio + HOST_CTL); - - /* Flush */ - readl(dd->mmio + HOST_CTL); - - /* Wait for reset to clear */ - ssleep(1); - - /* Check the bit has cleared */ - if (readl(dd->mmio + HOST_CTL) & HOST_RESET) { - dev_err(&dd->pdev->dev, - "Reset bit did not clear.\n"); - return -1; - } - - return 0; -} - /* * Display the identify command data. * -- cgit v1.2.1 From 6b06d35f3f63dbfde71c792b8584225f3d1fc7f2 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 3 Apr 2013 19:54:35 +0530 Subject: mtip32xx: return 0 from pci probe in case of rebuild Fix to return 0 from pci probe in case of rebuild. If not, pci consider probe has failed, and crash during rmmod. Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 30f233634650..ce4e47dcc153 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -4302,6 +4302,8 @@ static int mtip_pci_probe(struct pci_dev *pdev, instance++; if (rv != MTIP_FTL_REBUILD_MAGIC) set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); + else + rv = 0; /* device in rebuild state, return 0 from probe */ goto done; block_initialize_err: -- cgit v1.2.1 From 0caff00390db41c98976e65f2ebc3eeaa4861358 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 3 Apr 2013 19:56:21 +0530 Subject: mtip32xx: Add debugfs entry device_status This patch adds a new debugfs entry 'device_status' in /sys/kernel/debug/rssd. The value of this entry shows devices online and those in the process of removing. Signed-off-by: Sam Bradshaw Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 148 ++++++++++++++++++++++++++++++++++++-- drivers/block/mtip32xx/mtip32xx.h | 18 +++-- 2 files changed, 154 insertions(+), 12 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index ce4e47dcc153..8517af8c0fcb 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -81,12 +81,17 @@ /* Device instance number, incremented each time a device is probed. */ static int instance; +struct list_head online_list; +struct list_head removing_list; +spinlock_t dev_lock; + /* * Global variable used to hold the major block device number * allocated in mtip_init(). */ static int mtip_major; static struct dentry *dfs_parent; +static struct dentry *dfs_device_status; static u32 cpu_use[NR_CPUS]; @@ -2707,6 +2712,100 @@ static ssize_t mtip_hw_show_status(struct device *dev, static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL); +/* debugsfs entries */ + +static ssize_t show_device_status(struct device_driver *drv, char *buf) +{ + int size = 0; + struct driver_data *dd, *tmp; + unsigned long flags; + char id_buf[42]; + u16 status = 0; + + spin_lock_irqsave(&dev_lock, flags); + size += sprintf(&buf[size], "Devices Present:\n"); + list_for_each_entry_safe(dd, tmp, &online_list, online_list) { + if (dd && dd->pdev) { + if (dd->port && + dd->port->identify && + dd->port->identify_valid) { + strlcpy(id_buf, + (char *) (dd->port->identify + 10), 21); + status = *(dd->port->identify + 141); + } else { + memset(id_buf, 0, 42); + status = 0; + } + + if (dd->port && + test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) { + size += sprintf(&buf[size], + " device %s %s (ftl rebuild %d %%)\n", + dev_name(&dd->pdev->dev), + id_buf, + status); + } else { + size += sprintf(&buf[size], + " device %s %s\n", + dev_name(&dd->pdev->dev), + id_buf); + } + } + } + + size += sprintf(&buf[size], "Devices Being Removed:\n"); + list_for_each_entry_safe(dd, tmp, &removing_list, remove_list) { + if (dd && dd->pdev) { + if (dd->port && + dd->port->identify && + dd->port->identify_valid) { + strlcpy(id_buf, + (char *) (dd->port->identify+10), 21); + status = *(dd->port->identify + 141); + } else { + memset(id_buf, 0, 42); + status = 0; + } + + if (dd->port && + test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) { + size += sprintf(&buf[size], + " device %s %s (ftl rebuild %d %%)\n", + dev_name(&dd->pdev->dev), + id_buf, + status); + } else { + size += sprintf(&buf[size], + " device %s %s\n", + dev_name(&dd->pdev->dev), + id_buf); + } + } + } + spin_unlock_irqrestore(&dev_lock, flags); + + return size; +} + +static ssize_t mtip_hw_read_device_status(struct file *f, char __user *ubuf, + size_t len, loff_t *offset) +{ + int size = *offset; + char buf[MTIP_DFS_MAX_BUF_SIZE]; + + if (!len || *offset) + return 0; + + size += show_device_status(NULL, buf); + + *offset = size <= len ? size : len; + size = copy_to_user(ubuf, buf, *offset); + if (size) + return -EFAULT; + + return *offset; +} + static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, size_t len, loff_t *offset) { @@ -2801,6 +2900,13 @@ static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, return *offset; } +static const struct file_operations mtip_device_status_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = mtip_hw_read_device_status, + .llseek = no_llseek, +}; + static const struct file_operations mtip_regs_fops = { .owner = THIS_MODULE, .open = simple_open, @@ -4158,6 +4264,7 @@ static int mtip_pci_probe(struct pci_dev *pdev, const struct cpumask *node_mask; int cpu, i = 0, j = 0; int my_node = NUMA_NO_NODE; + unsigned long flags; /* Allocate memory for this devices private data. */ my_node = pcibus_to_node(pdev->bus); @@ -4215,6 +4322,9 @@ static int mtip_pci_probe(struct pci_dev *pdev, dd->pdev = pdev; dd->numa_node = my_node; + INIT_LIST_HEAD(&dd->online_list); + INIT_LIST_HEAD(&dd->remove_list); + memset(dd->workq_name, 0, 32); snprintf(dd->workq_name, 31, "mtipq%d", dd->instance); @@ -4304,6 +4414,12 @@ static int mtip_pci_probe(struct pci_dev *pdev, set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); else rv = 0; /* device in rebuild state, return 0 from probe */ + + /* Add to online list even if in ftl rebuild */ + spin_lock_irqsave(&dev_lock, flags); + list_add(&dd->online_list, &online_list); + spin_unlock_irqrestore(&dev_lock, flags); + goto done; block_initialize_err: @@ -4337,9 +4453,15 @@ static void mtip_pci_remove(struct pci_dev *pdev) { struct driver_data *dd = pci_get_drvdata(pdev); int counter = 0; + unsigned long flags; set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag); + spin_lock_irqsave(&dev_lock, flags); + list_del_init(&dd->online_list); + list_add(&dd->remove_list, &removing_list); + spin_unlock_irqrestore(&dev_lock, flags); + if (mtip_check_surprise_removal(pdev)) { while (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) { counter++; @@ -4365,6 +4487,10 @@ static void mtip_pci_remove(struct pci_dev *pdev) pci_disable_msi(pdev); + spin_lock_irqsave(&dev_lock, flags); + list_del_init(&dd->remove_list); + spin_unlock_irqrestore(&dev_lock, flags); + kfree(dd); pcim_iounmap_regions(pdev, 1 << MTIP_ABAR); } @@ -4512,6 +4638,11 @@ static int __init mtip_init(void) pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); + spin_lock_init(&dev_lock); + + INIT_LIST_HEAD(&online_list); + INIT_LIST_HEAD(&removing_list); + /* Allocate a major block device number to use with this driver. */ error = register_blkdev(0, MTIP_DRV_NAME); if (error <= 0) { @@ -4521,11 +4652,18 @@ static int __init mtip_init(void) } mtip_major = error; - if (!dfs_parent) { - dfs_parent = debugfs_create_dir("rssd", NULL); - if (IS_ERR_OR_NULL(dfs_parent)) { - pr_warn("Error creating debugfs parent\n"); - dfs_parent = NULL; + dfs_parent = debugfs_create_dir("rssd", NULL); + if (IS_ERR_OR_NULL(dfs_parent)) { + pr_warn("Error creating debugfs parent\n"); + dfs_parent = NULL; + } + if (dfs_parent) { + dfs_device_status = debugfs_create_file("device_status", + S_IRUGO, dfs_parent, NULL, + &mtip_device_status_fops); + if (IS_ERR_OR_NULL(dfs_device_status)) { + pr_err("Error creating device_status node\n"); + dfs_device_status = NULL; } } diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 3bffff5f670c..8e8334c9dd0f 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -129,9 +129,9 @@ enum { MTIP_PF_EH_ACTIVE_BIT = 1, /* error handling */ MTIP_PF_SE_ACTIVE_BIT = 2, /* secure erase */ MTIP_PF_DM_ACTIVE_BIT = 3, /* download microcde */ - MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) | \ - (1 << MTIP_PF_EH_ACTIVE_BIT) | \ - (1 << MTIP_PF_SE_ACTIVE_BIT) | \ + MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) | + (1 << MTIP_PF_EH_ACTIVE_BIT) | + (1 << MTIP_PF_SE_ACTIVE_BIT) | (1 << MTIP_PF_DM_ACTIVE_BIT)), MTIP_PF_SVC_THD_ACTIVE_BIT = 4, @@ -144,9 +144,9 @@ enum { MTIP_DDF_REMOVE_PENDING_BIT = 1, MTIP_DDF_OVER_TEMP_BIT = 2, MTIP_DDF_WRITE_PROTECT_BIT = 3, - MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \ - (1 << MTIP_DDF_SEC_LOCK_BIT) | \ - (1 << MTIP_DDF_OVER_TEMP_BIT) | \ + MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | + (1 << MTIP_DDF_SEC_LOCK_BIT) | + (1 << MTIP_DDF_OVER_TEMP_BIT) | (1 << MTIP_DDF_WRITE_PROTECT_BIT)), MTIP_DDF_CLEANUP_BIT = 5, @@ -180,7 +180,7 @@ struct mtip_work { #define MTIP_TRIM_TIMEOUT_MS 240000 #define MTIP_MAX_TRIM_ENTRIES 8 -#define MTIP_MAX_TRIM_ENTRY_LEN 0xfff8 +#define MTIP_MAX_TRIM_ENTRY_LEN 0xfff8 struct mtip_trim_entry { u32 lba; /* starting lba of region */ @@ -501,6 +501,10 @@ struct driver_data { atomic_t irq_workers_active; int isr_binding; + + struct list_head online_list; /* linkage for online list */ + + struct list_head remove_list; /* linkage for removing list */ }; #endif -- cgit v1.2.1 From 1f66396682a0be92e1c141bff4b006d7654832e1 Mon Sep 17 00:00:00 2001 From: Alexey Pelykh Date: Wed, 3 Apr 2013 14:31:46 -0400 Subject: OMAP/serial: Revert bad fix of Rx FIFO threshold granularity Partially reverts 1776fd059c40907297d6c26c51876575d63fd9e2 that introduced regression reported by Paul Walmsley. This commit restores setting granularity in SCR register and adds note about comments below being inconsistent with actual code. Signed-off-by: Alexey Pelykh Tested-by: Paul Walmsley Cc: Kevin Hilman Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 4dc41408ecb7..30d4f7a783cd 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -886,6 +886,17 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); /* FIFO ENABLE, DMA MODE */ + up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; + /* + * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK + * sets Enables the granularity of 1 for TRIGGER RX + * level. Along with setting RX FIFO trigger level + * to 1 (as noted below, 16 characters) and TLR[3:0] + * to zero this will result RX FIFO threshold level + * to 1 character, instead of 16 as noted in comment + * below. + */ + /* Set receive FIFO threshold to 16 characters and * transmit FIFO threshold to 16 spaces */ -- cgit v1.2.1 From 24ad0ef9c8b946ed2abe681e4e44f4a1e643d882 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 28 Mar 2013 11:07:29 +0000 Subject: PCI/ACPI: Always resume devices on ACPI wakeup notifications It turns out that the _Lxx control methods provided by some BIOSes clear the PME Status bit of PCI devices they handle, which means that pci_acpi_wake_dev() cannot really use that bit to check whether or not the device has signalled wakeup. One symptom of the problem is, for example, that when an affected PCI USB controller is runtime-suspended, then plugging in a new USB device into one of the controller's ports will not wake up the controller, which should happen. For this reason, make pci_acpi_wake_dev() always attempt to resume the device it is called for regardless of the device's PME Status bit value (that bit still has to be cleared if set at this point, though). Reported-by: Sarah Sharp Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas Acked-by: Matthew Garrett CC: stable@vger.kernel.org # v3.7+ --- drivers/pci/pci-acpi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index dee5dddaa292..5147c210df52 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -53,14 +53,15 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) return; } - if (!pci_dev->pm_cap || !pci_dev->pme_support - || pci_check_pme_status(pci_dev)) { - if (pci_dev->pme_poll) - pci_dev->pme_poll = false; + /* Clear PME Status if set. */ + if (pci_dev->pme_support) + pci_check_pme_status(pci_dev); - pci_wakeup_event(pci_dev); - pm_runtime_resume(&pci_dev->dev); - } + if (pci_dev->pme_poll) + pci_dev->pme_poll = false; + + pci_wakeup_event(pci_dev); + pm_runtime_resume(&pci_dev->dev); if (pci_dev->subordinate) pci_pme_wakeup_bus(pci_dev->subordinate); -- cgit v1.2.1 From de7d5f729c72638f41d7c17487bccb1c570ff144 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 30 Mar 2013 23:38:02 +0100 Subject: PCI/PM: Disable runtime PM of PCIe ports The runtime PM of PCIe ports turns out to be quite fragile, as in some cases things work while in some other cases they don't and we don't seem to have a good way to determine whether or not they are going to work in advance. For this reason, avoid enabling runtime PM for PCIe ports by keeping their runtime PM reference counters always above 0 for the time being. When a PCIe port is suspended, it can no longer report events like hotplug, so hotplug below the port may not work, as in the bug report below. [bhelgaas: changelog, stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v3.6+ --- drivers/pci/pcie/portdrv_pci.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 08c243ab034e..ed4d09498337 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -184,14 +184,6 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { #define PCIE_PORTDRV_PM_OPS NULL #endif /* !PM */ -/* - * PCIe port runtime suspend is broken for some chipsets, so use a - * black list to disable runtime PM for these chipsets. - */ -static const struct pci_device_id port_runtime_pm_black_list[] = { - { /* end: all zeroes */ } -}; - /* * pcie_portdrv_probe - Probe PCI-Express port devices * @dev: PCI-Express port device being probed @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci_dev *dev, * it by default. */ dev->d3cold_allowed = false; - if (!pci_match_id(port_runtime_pm_black_list, dev)) - pm_runtime_put_noidle(&dev->dev); - return 0; } static void pcie_portdrv_remove(struct pci_dev *dev) { - if (!pci_match_id(port_runtime_pm_black_list, dev)) - pm_runtime_get_noresume(&dev->dev); pcie_port_device_remove(dev); pci_disable_device(dev); } -- cgit v1.2.1 From d8668fcb0b257d9fdcfbe5c172a99b8d85e1cd82 Mon Sep 17 00:00:00 2001 From: Shan Hai Date: Mon, 18 Mar 2013 10:30:43 +0800 Subject: libata: Use integer return value for atapi_command_packet_set The function returns type of ATAPI drives so it should return integer value. The commit 4dce8ba94c7 (libata: Use 'bool' return value for ata_id_XXX) since v2.6.39 changed the type of return value from int to bool, the change would cause all of the ATAPI class drives to be treated as TYPE_TAPE and the max_sectors of the drives to be set to 65535 because of the commit f8d8e5799b7(libata: increase 128 KB / cmd limit for ATAPI tape drives), for the function would return true for all ATAPI class drives and the TYPE_TAPE is defined as 0x01. Cc: stable@vger.kernel.org Signed-off-by: Shan Hai Signed-off-by: Jeff Garzik --- include/linux/ata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ata.h b/include/linux/ata.h index 8f7a3d68371a..ee0bd9524055 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -954,7 +954,7 @@ static inline int atapi_cdb_len(const u16 *dev_id) } } -static inline bool atapi_command_packet_set(const u16 *dev_id) +static inline int atapi_command_packet_set(const u16 *dev_id) { return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f; } -- cgit v1.2.1 From a32450e127fc6e5ca6d958ceb3cfea4d30a00846 Mon Sep 17 00:00:00 2001 From: Shan Hai Date: Mon, 18 Mar 2013 10:30:44 +0800 Subject: libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive The Slimtype DVD A DS8A8SH drive locks up when max sector is smaller than 65535, and the blow backtrace is observed on locking up: INFO: task flush-8:32:1130 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:32 D ffffffff8180cf60 0 1130 2 0x00000000 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000 Call Trace: [] schedule+0x5d/0x70 [] io_schedule+0x8c/0xd0 [] get_request+0x731/0x7d0 [] ? cfq_allow_merge+0x50/0x90 [] ? wake_up_bit+0x40/0x40 [] ? bio_attempt_back_merge+0x33/0x110 [] blk_queue_bio+0x23a/0x3f0 [] generic_make_request+0xc6/0x120 [] submit_bio+0x138/0x160 [] ? bio_alloc_bioset+0x96/0x120 [] submit_bh+0x1f1/0x220 [] __block_write_full_page+0x228/0x340 [] ? attach_nobh_buffers+0xc0/0xc0 [] ? I_BDEV+0x10/0x10 [] ? I_BDEV+0x10/0x10 [] block_write_full_page_endio+0xe6/0x100 [] block_write_full_page+0x15/0x20 [] blkdev_writepage+0x18/0x20 [] __writepage+0x17/0x40 [] write_cache_pages+0x34a/0x4a0 [] ? set_page_dirty+0x70/0x70 [] generic_writepages+0x51/0x80 [] do_writepages+0x20/0x50 [] __writeback_single_inode+0xa6/0x2b0 [] writeback_sb_inodes+0x311/0x4d0 [] __writeback_inodes_wb+0x86/0xd0 [] wb_writeback+0x1a3/0x330 [] ? _raw_spin_lock_irqsave+0x3f/0x50 [] ? get_nr_inodes+0x52/0x70 [] wb_do_writeback+0x1dc/0x260 [] ? schedule_timeout+0x204/0x240 [] bdi_writeback_thread+0x102/0x2b0 [] ? wb_do_writeback+0x260/0x260 [] kthread+0xc0/0xd0 [] ? kthread_worker_fn+0x1b0/0x1b0 [] ret_from_fork+0x7c/0xb0 [] ? kthread_worker_fn+0x1b0/0x1b0 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" It was previously working by accident, since another bug introduced by 4dce8ba94c7 (libata: Use 'bool' return value for ata_id_XXX) caused all drives to use maxsect=65535. Cc: stable@vger.kernel.org Signed-off-by: Shan Hai Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++++ include/linux/libata.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 497adea1f0d6..0075944a64dc 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2439,6 +2439,9 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); + if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48) + dev->max_sectors = ATA_MAX_SECTORS_LBA48; + if (ap->ops->dev_config) ap->ops->dev_config(dev); @@ -4100,6 +4103,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, + { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, /* Devices we expect to fail diagnostics */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 91c9d109e5f1..eae7a053dc51 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -398,6 +398,7 @@ enum { ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */ ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */ ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */ + ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.1 From b55f84e2d527182e7c611d466cd0bb6ddce201de Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Wed, 6 Mar 2013 10:49:05 -0500 Subject: ata_piix: Fix DVD not dectected at some Haswell platforms There is a quirk patch 5e5a4f5d5a08c9c504fe956391ac3dae2c66556d "ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge chipsets(v2)" fixing the 4 ports IDE controller 32bit PIO mode. We've hit a problem with DVD not recognized on Haswell Desktop platform which includes Lynx Point 2-port SATA controller. This quirk patch disables 32bit PIO on this controller in IDE mode. v2: Change spelling error in statememnt pointed by Sergei Shtylyov. v3: Change comment statememnt and spliting line over 80 characters pointed by Libor Pechacek and also rebase the patch against 3.8-rc7 kernel. Tested-by: Lee, Chun-Yi Signed-off-by: Youquan Song Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index ffdd32d22602..2f48123d74c4 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -150,6 +150,7 @@ enum piix_controller_ids { tolapai_sata, piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ ich8_sata_snb, + ich8_2port_sata_snb, }; struct piix_map_db { @@ -304,7 +305,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Lynx Point) */ - { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point-LP) */ @@ -439,6 +440,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich8m_apple_sata] = &ich8m_apple_map_db, [tolapai_sata] = &tolapai_map_db, [ich8_sata_snb] = &ich8_map_db, + [ich8_2port_sata_snb] = &ich8_2port_map_db, }; static struct pci_bits piix_enable_bits[] = { @@ -1242,6 +1244,16 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + + [ich8_2port_sata_snb] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR + | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, }; #define AHCI_PCI_BAR 5 -- cgit v1.2.1 From 8e725c7f8a60feaa88edacd4dee2c754d5ae7706 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 29 Mar 2013 11:54:55 +0000 Subject: libata: fix DMA to stack in reading devslp_timing parameters Commit 803739d25c2343da6d2f95eebdcbc08bf67097d4 ("[libata] replace sata_settings with devslp_timing"), which was also Cc: stable, used a stack buffer to receive data from ata_read_log_page(), which triggers the following warning: ahci 0000:00:1f.2: DMA-API: device driver maps memory fromstack [addr=ffff880140469948] Fix this by using ap->sector_buf instead of a stack buffer. Signed-off-by: David Woodhouse Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 0075944a64dc..63c743baf920 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2329,7 +2329,7 @@ int ata_dev_configure(struct ata_device *dev) * from SATA Settings page of Identify Device Data Log. */ if (ata_id_has_devslp(dev->id)) { - u8 sata_setting[ATA_SECT_SIZE]; + u8 *sata_setting = ap->sector_buf; int i, j; dev->flags |= ATA_DFLAG_DEVSLP; -- cgit v1.2.1 From 6d3bfc7be6f80d0c6ee6800d58d573343bf6e260 Mon Sep 17 00:00:00 2001 From: Krzysztof Mazur Date: Wed, 27 Mar 2013 13:51:14 +0100 Subject: [libata] Fix HDIO_DRIVE_* ioctl() Linux 3.9 regression On Mon, Mar 25, 2013 at 06:26:50PM +0100, Ronald wrote: > In reply to [1]: I have the same issue. Git bisect took 50+ rebuilds xD > > Smartd does not work anymore since 84a9a8cd9 ([libata] Set proper SK > when CK_COND is set.). > [1] http://www.spinics.net/lists/linux-ide/msg45268.html It seems that the SAM_STAT_CHECK_CONDITION is not cleared causing -EIO, because that patch modified sensebuf and the check for clearing SAM_STAT_CHECK_CONDITION is no longer valid. Fix that. Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 318b41358187..ff44787e5a45 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -532,8 +532,8 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) struct scsi_sense_hdr sshdr; scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sshdr); - if (sshdr.sense_key == 0 && - sshdr.asc == 0 && sshdr.ascq == 0) + if (sshdr.sense_key == RECOVERED_ERROR && + sshdr.asc == 0 && sshdr.ascq == 0x1d) cmd_result &= ~SAM_STAT_CHECK_CONDITION; } @@ -618,8 +618,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) struct scsi_sense_hdr sshdr; scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sshdr); - if (sshdr.sense_key == 0 && - sshdr.asc == 0 && sshdr.ascq == 0) + if (sshdr.sense_key == RECOVERED_ERROR && + sshdr.asc == 0 && sshdr.ascq == 0x1d) cmd_result &= ~SAM_STAT_CHECK_CONDITION; } -- cgit v1.2.1 From 1d87caa69c04008e09f5ff47b5e6acb6116febc7 Mon Sep 17 00:00:00 2001 From: Rainer Koenig Date: Thu, 4 Apr 2013 08:40:38 +0200 Subject: ALSA: hda - Enabling Realtek ALC 671 codec * Added the device ID to the modalias list and assinged ALC662 patches for it * Added 4 port support for the device ID 0671 in alc662_parse_auto_config Signed-off-by: Rainer Koenig Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 563c24df4d6f..f15c36bde540 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3440,7 +3440,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec) const hda_nid_t *ssids; if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 || - codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670) + codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670 || + codec->vendor_id == 0x10ec0671) ssids = alc663_ssids; else ssids = alc662_ssids; @@ -3894,6 +3895,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 }, { .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 }, { .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 }, + { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 }, { .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 }, { .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 }, -- cgit v1.2.1 From c66bb3f075cfe2d17b2427e96e043622db02759c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 4 Apr 2013 09:03:41 +0200 Subject: mtip32xx: fix two smatch warnings Dan reports: New smatch warnings: drivers/block/mtip32xx/mtip32xx.c:2728 show_device_status() warn: variable dereferenced before check 'dd' (see line 2727) drivers/block/mtip32xx/mtip32xx.c:2758 show_device_status() warn: variable dereferenced before check 'dd' (see line 2757) which are checking if dd == NULL, in a list_for_each_entry() type loop. Get rid of the check, dd can never be NULL here. Reported-by: Dan Carpenter Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 8517af8c0fcb..32c678028e53 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2725,7 +2725,7 @@ static ssize_t show_device_status(struct device_driver *drv, char *buf) spin_lock_irqsave(&dev_lock, flags); size += sprintf(&buf[size], "Devices Present:\n"); list_for_each_entry_safe(dd, tmp, &online_list, online_list) { - if (dd && dd->pdev) { + if (dd->pdev) { if (dd->port && dd->port->identify && dd->port->identify_valid) { @@ -2755,7 +2755,7 @@ static ssize_t show_device_status(struct device_driver *drv, char *buf) size += sprintf(&buf[size], "Devices Being Removed:\n"); list_for_each_entry_safe(dd, tmp, &removing_list, remove_list) { - if (dd && dd->pdev) { + if (dd->pdev) { if (dd->port && dd->port->identify && dd->port->identify_valid) { -- cgit v1.2.1 From f1a9a149abc86903e81dd1b2e720f3f89874384b Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 2 Apr 2013 11:11:52 +0200 Subject: HID: magicmouse: fix race between input_register() and probe() Since kernel 3.7, it appears that the input registration occured before the end of magicmouse_setup_input(). This is shown by receiving a lot of "EV_SYN SYN_REPORT 1" instead of normal "EV_SYN SYN_REPORT 0". This value means that the output buffer is full, and the user space is loosing events. Using .input_configured guarantees that the race is not occuring, and that the call of "input_set_events_per_packet(input, 60)" is taken into account by input_register(). Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=908604 Cc: stable@vger.kernel.org Reported-and-Tested-By: Clarke Wixon Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index f7f113ba083e..a8ce44296cfd 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -462,6 +462,21 @@ static int magicmouse_input_mapping(struct hid_device *hdev, return 0; } +static void magicmouse_input_configured(struct hid_device *hdev, + struct hid_input *hi) + +{ + struct magicmouse_sc *msc = hid_get_drvdata(hdev); + + int ret = magicmouse_setup_input(msc->input, hdev); + if (ret) { + hid_err(hdev, "magicmouse setup input failed (%d)\n", ret); + /* clean msc->input to notify probe() of the failure */ + msc->input = NULL; + } +} + + static int magicmouse_probe(struct hid_device *hdev, const struct hid_device_id *id) { @@ -493,15 +508,10 @@ static int magicmouse_probe(struct hid_device *hdev, goto err_free; } - /* We do this after hid-input is done parsing reports so that - * hid-input uses the most natural button and axis IDs. - */ - if (msc->input) { - ret = magicmouse_setup_input(msc->input, hdev); - if (ret) { - hid_err(hdev, "magicmouse setup input failed (%d)\n", ret); - goto err_stop_hw; - } + if (!msc->input) { + hid_err(hdev, "magicmouse input not registered\n"); + ret = -ENOMEM; + goto err_stop_hw; } if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE) @@ -568,6 +578,7 @@ static struct hid_driver magicmouse_driver = { .remove = magicmouse_remove, .raw_event = magicmouse_raw_event, .input_mapping = magicmouse_input_mapping, + .input_configured = magicmouse_input_configured, }; module_hid_driver(magicmouse_driver); -- cgit v1.2.1 From 57c7310b8eb96b0fe3b0aaa8dc194adbae03bef3 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Tue, 5 Mar 2013 16:01:47 -0500 Subject: GFS2: use kmalloc for lvb bitmap The temp lvb bitmap was on the stack, which could be an alignment problem for __set_bit_le. Use kmalloc for it instead. Signed-off-by: David Teigland Signed-off-by: Steven Whitehouse --- fs/gfs2/incore.h | 1 + fs/gfs2/lock_dlm.c | 31 ++++++++++++++++++------------- 2 files changed, 19 insertions(+), 13 deletions(-) diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h index 156e42ec84ea..5c29216e9cc1 100644 --- a/fs/gfs2/incore.h +++ b/fs/gfs2/incore.h @@ -588,6 +588,7 @@ struct lm_lockstruct { struct dlm_lksb ls_control_lksb; /* control_lock */ char ls_control_lvb[GDLM_LVB_SIZE]; /* control_lock lvb */ struct completion ls_sync_wait; /* {control,mounted}_{lock,unlock} */ + char *ls_lvb_bits; spinlock_t ls_recover_spin; /* protects following fields */ unsigned long ls_recover_flags; /* DFL_ */ diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index 9802de0f85e6..b15bb45911ca 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -580,7 +580,6 @@ static void gfs2_control_func(struct work_struct *work) { struct gfs2_sbd *sdp = container_of(work, struct gfs2_sbd, sd_control_work.work); struct lm_lockstruct *ls = &sdp->sd_lockstruct; - char lvb_bits[GDLM_LVB_SIZE]; uint32_t block_gen, start_gen, lvb_gen, flags; int recover_set = 0; int write_lvb = 0; @@ -634,7 +633,7 @@ static void gfs2_control_func(struct work_struct *work) return; } - control_lvb_read(ls, &lvb_gen, lvb_bits); + control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits); spin_lock(&ls->ls_recover_spin); if (block_gen != ls->ls_recover_block || @@ -664,10 +663,10 @@ static void gfs2_control_func(struct work_struct *work) ls->ls_recover_result[i] = 0; - if (!test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET)) + if (!test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET)) continue; - __clear_bit_le(i, lvb_bits + JID_BITMAP_OFFSET); + __clear_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET); write_lvb = 1; } } @@ -691,7 +690,7 @@ static void gfs2_control_func(struct work_struct *work) continue; if (ls->ls_recover_submit[i] < start_gen) { ls->ls_recover_submit[i] = 0; - __set_bit_le(i, lvb_bits + JID_BITMAP_OFFSET); + __set_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET); } } /* even if there are no bits to set, we need to write the @@ -705,7 +704,7 @@ static void gfs2_control_func(struct work_struct *work) spin_unlock(&ls->ls_recover_spin); if (write_lvb) { - control_lvb_write(ls, start_gen, lvb_bits); + control_lvb_write(ls, start_gen, ls->ls_lvb_bits); flags = DLM_LKF_CONVERT | DLM_LKF_VALBLK; } else { flags = DLM_LKF_CONVERT; @@ -725,7 +724,7 @@ static void gfs2_control_func(struct work_struct *work) */ for (i = 0; i < recover_size; i++) { - if (test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET)) { + if (test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET)) { fs_info(sdp, "recover generation %u jid %d\n", start_gen, i); gfs2_recover_set(sdp, i); @@ -758,7 +757,6 @@ static void gfs2_control_func(struct work_struct *work) static int control_mount(struct gfs2_sbd *sdp) { struct lm_lockstruct *ls = &sdp->sd_lockstruct; - char lvb_bits[GDLM_LVB_SIZE]; uint32_t start_gen, block_gen, mount_gen, lvb_gen; int mounted_mode; int retries = 0; @@ -857,7 +855,7 @@ locks_done: * lvb_gen will be non-zero. */ - control_lvb_read(ls, &lvb_gen, lvb_bits); + control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits); if (lvb_gen == 0xFFFFFFFF) { /* special value to force mount attempts to fail */ @@ -887,7 +885,7 @@ locks_done: * and all lvb bits to be clear (no pending journal recoveries.) */ - if (!all_jid_bits_clear(lvb_bits)) { + if (!all_jid_bits_clear(ls->ls_lvb_bits)) { /* journals need recovery, wait until all are clear */ fs_info(sdp, "control_mount wait for journal recovery\n"); goto restart; @@ -949,7 +947,6 @@ static int dlm_recovery_wait(void *word) static int control_first_done(struct gfs2_sbd *sdp) { struct lm_lockstruct *ls = &sdp->sd_lockstruct; - char lvb_bits[GDLM_LVB_SIZE]; uint32_t start_gen, block_gen; int error; @@ -991,8 +988,8 @@ restart: memset(ls->ls_recover_result, 0, ls->ls_recover_size*sizeof(uint32_t)); spin_unlock(&ls->ls_recover_spin); - memset(lvb_bits, 0, sizeof(lvb_bits)); - control_lvb_write(ls, start_gen, lvb_bits); + memset(ls->ls_lvb_bits, 0, GDLM_LVB_SIZE); + control_lvb_write(ls, start_gen, ls->ls_lvb_bits); error = mounted_lock(sdp, DLM_LOCK_PR, DLM_LKF_CONVERT); if (error) @@ -1022,6 +1019,12 @@ static int set_recover_size(struct gfs2_sbd *sdp, struct dlm_slot *slots, uint32_t old_size, new_size; int i, max_jid; + if (!ls->ls_lvb_bits) { + ls->ls_lvb_bits = kzalloc(GDLM_LVB_SIZE, GFP_NOFS); + if (!ls->ls_lvb_bits) + return -ENOMEM; + } + max_jid = 0; for (i = 0; i < num_slots; i++) { if (max_jid < slots[i].slot - 1) @@ -1057,6 +1060,7 @@ static int set_recover_size(struct gfs2_sbd *sdp, struct dlm_slot *slots, static void free_recover_size(struct lm_lockstruct *ls) { + kfree(ls->ls_lvb_bits); kfree(ls->ls_recover_submit); kfree(ls->ls_recover_result); ls->ls_recover_submit = NULL; @@ -1205,6 +1209,7 @@ static int gdlm_mount(struct gfs2_sbd *sdp, const char *table) ls->ls_recover_size = 0; ls->ls_recover_submit = NULL; ls->ls_recover_result = NULL; + ls->ls_lvb_bits = NULL; error = set_recover_size(sdp, NULL, 0); if (error) -- cgit v1.2.1 From 4146c3d469dc400eefa253fb37aa1e74fb5e41f8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Thu, 7 Mar 2013 23:42:52 +0900 Subject: GFS2: use memchr_inv Use memchr_inv to verify that the specified memory range is cleared. Signed-off-by: Akinobu Mita Cc: Steven Whitehouse Cc: cluster-devel@redhat.com Cc: Christine Caulfield Cc: David Teigland --- fs/gfs2/lock_dlm.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index b15bb45911ca..c8423d6de6c3 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -483,12 +483,8 @@ static void control_lvb_write(struct lm_lockstruct *ls, uint32_t lvb_gen, static int all_jid_bits_clear(char *lvb) { - int i; - for (i = JID_BITMAP_OFFSET; i < GDLM_LVB_SIZE; i++) { - if (lvb[i]) - return 0; - } - return 1; + return !memchr_inv(lvb + JID_BITMAP_OFFSET, 0, + GDLM_LVB_SIZE - JID_BITMAP_OFFSET); } static void sync_wait_cb(void *arg) -- cgit v1.2.1 From 441362d06be349430d06e37286adce4b90e6ce96 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 11 Mar 2013 23:01:37 +0800 Subject: GFS2: return error if malloc failed in gfs2_rs_alloc() The error code in gfs2_rs_alloc() is set to ENOMEM when error but never be used, instead, gfs2_rs_alloc() always return 0. Fix to return 'error'. Signed-off-by: Wei Yongjun Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index d1f51fd73f86..70d1cd0b5f3b 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -576,7 +576,7 @@ int gfs2_rs_alloc(struct gfs2_inode *ip) RB_CLEAR_NODE(&ip->i_res->rs_node); out: up_write(&ip->i_rw_mutex); - return 0; + return error; } static void dump_rs(struct seq_file *seq, const struct gfs2_blkreserv *rs) -- cgit v1.2.1 From c2952d202f710d326ac36a8ea6bd216b20615ec8 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 14 Mar 2013 15:49:59 +0000 Subject: GFS2: Fix unlock of fcntl locks during withdrawn state When withdraw occurs, we need to continue to allow unlocks of fcntl locks to occur, however these will only be local, since the node has withdrawn from the cluster. This prevents triggering a VFS level bug trap due to locks remaining when a file is closed. Signed-off-by: Steven Whitehouse --- fs/gfs2/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index 019f45e45097..d79c2dadc536 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -923,8 +923,11 @@ static int gfs2_lock(struct file *file, int cmd, struct file_lock *fl) cmd = F_SETLK; fl->fl_type = F_UNLCK; } - if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) + if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) { + if (fl->fl_type == F_UNLCK) + posix_lock_file_wait(file, fl); return -EIO; + } if (IS_GETLK(cmd)) return dlm_posix_get(ls->ls_dlm, ip->i_no_addr, file, fl); else if (fl->fl_type == F_UNLCK) -- cgit v1.2.1 From aeb3a97222832e5457c4b72d72235098ce4bfe8d Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Thu, 4 Apr 2013 11:47:13 +0200 Subject: ALSA: hda - fix typo in proc output Rename "Digitial In" to "Digital In". This function is only used for proc output, so should not cause any problems to change. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index ecdf30eb5879..4aba7646dd9c 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -173,7 +173,7 @@ const char *snd_hda_get_jack_type(u32 cfg) "Line Out", "Speaker", "HP Out", "CD", "SPDIF Out", "Digital Out", "Modem Line", "Modem Hand", "Line In", "Aux", "Mic", "Telephony", - "SPDIF In", "Digitial In", "Reserved", "Other" + "SPDIF In", "Digital In", "Reserved", "Other" }; return jack_types[(cfg & AC_DEFCFG_DEVICE) -- cgit v1.2.1 From 8fc24426f15d967d585af7062b7be3c46bbce571 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 4 Apr 2013 15:35:24 +0200 Subject: Revert "ALSA: hda - Allow power_save_controller option override DCAPS" This reverts commit 6ab317419c62850a71e2adfd1573e5ee87d8774f. The commit [6ab317419c: ALSA: hda - Allow power_save_controller option override DCAPS] changed the behavior of power_save_controller so that it can override the driver capability. This assumed that this option is rarely changed dynamically unlike power_save option. Too naive. It turned out that the user-space power-management tool tries to set power_save_controller option to 1 together with power_save option without knowing what's actually doing. This enabled forcibly the runtime PM of the controller, which is known to be broken om many chips thus disabled as default. So, the only sane fix is to revert this commit again. It was intended to ease debugging/testing for runtime PM enablement, but obviously we need another way for it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=56171 Reported-and-tested-by: Nikita Tsukanov Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 5 ++--- sound/pci/hda/hda_intel.c | 6 ++---- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 4499bd948860..95731a08f257 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) power_save - Automatic power-saving timeout (in second, 0 = disable) - power_save_controller - Support runtime D3 of HD-audio controller - (-1 = on for supported chip (default), false = off, - true = force to on even for unsupported hardware) + power_save_controller - Reset HD-audio controller in power-saving mode + (default = on) align_buffer_size - Force rounding of buffer/period sizes to multiples of 128 bytes. This is more efficient in terms of memory access but isn't required by the HDA spec and prevents diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 418bfc0eb0a3..bcd40ee488e3 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -134,8 +134,8 @@ MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " * this may give more power-saving, but will take longer time to * wake up. */ -static int power_save_controller = -1; -module_param(power_save_controller, bint, 0644); +static bool power_save_controller = 1; +module_param(power_save_controller, bool, 0644); MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode."); #endif /* CONFIG_PM */ @@ -2931,8 +2931,6 @@ static int azx_runtime_idle(struct device *dev) struct snd_card *card = dev_get_drvdata(dev); struct azx *chip = card->private_data; - if (power_save_controller > 0) - return 0; if (!power_save_controller || !(chip->driver_caps & AZX_DCAPS_PM_RUNTIME)) return -EBUSY; -- cgit v1.2.1 From b6a9b7f6b1f21735a7456d534dc0e68e61359d2c Mon Sep 17 00:00:00 2001 From: Jan Stancek Date: Thu, 4 Apr 2013 11:35:10 -0700 Subject: mm: prevent mmap_cache race in find_vma() find_vma() can be called by multiple threads with read lock held on mm->mmap_sem and any of them can update mm->mmap_cache. Prevent compiler from re-fetching mm->mmap_cache, because other readers could update it in the meantime: thread 1 thread 2 | find_vma() | find_vma() struct vm_area_struct *vma = NULL; | vma = mm->mmap_cache; | if (!(vma && vma->vm_end > addr | && vma->vm_start <= addr)) { | | mm->mmap_cache = vma; return vma; | ^^ compiler may optimize this | local variable out and re-read | mm->mmap_cache | This issue can be reproduced with gcc-4.8.0-1 on s390x by running mallocstress testcase from LTP, which triggers: kernel BUG at mm/rmap.c:1088! Call Trace: ([<000003d100c57000>] 0x3d100c57000) [<000000000023a1c0>] do_wp_page+0x2fc/0xa88 [<000000000023baae>] handle_pte_fault+0x41a/0xac8 [<000000000023d832>] handle_mm_fault+0x17a/0x268 [<000000000060507a>] do_protection_exception+0x1e2/0x394 [<0000000000603a04>] pgm_check_handler+0x138/0x13c [<000003fffcf1f07a>] 0x3fffcf1f07a Last Breaking-Event-Address: [<000000000024755e>] page_add_new_anon_rmap+0xc2/0x168 Thanks to Jakub Jelinek for his insight on gcc and helping to track this down. Signed-off-by: Jan Stancek Acked-by: David Rientjes Signed-off-by: Hugh Dickins Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- mm/mmap.c | 2 +- mm/nommu.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index 6466699b16cb..0db0de1c2fbe 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1940,7 +1940,7 @@ struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr) /* Check the cache first. */ /* (Cache hit rate is typically around 35%.) */ - vma = mm->mmap_cache; + vma = ACCESS_ONCE(mm->mmap_cache); if (!(vma && vma->vm_end > addr && vma->vm_start <= addr)) { struct rb_node *rb_node; diff --git a/mm/nommu.c b/mm/nommu.c index e19328087534..2f3ea749c318 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -821,7 +821,7 @@ struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr) struct vm_area_struct *vma; /* check the cache first */ - vma = mm->mmap_cache; + vma = ACCESS_ONCE(mm->mmap_cache); if (vma && vma->vm_start <= addr && vma->vm_end > addr) return vma; -- cgit v1.2.1 From e2409d83434d77874b461b78af6a19cd6e6a1280 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Sun, 31 Mar 2013 17:02:04 +0000 Subject: r8169: fix auto speed down issue It would cause no link after suspending or shutdowning when the nic changes the speed to 10M and connects to a link partner which forces the speed to 100M. Check the link partner ability to determine which speed to set. Signed-off-by: Hayes Wang Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 28fb50a1e9c3..4ecbe64a758d 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3818,6 +3818,30 @@ static void rtl_init_mdio_ops(struct rtl8169_private *tp) } } +static void rtl_speed_down(struct rtl8169_private *tp) +{ + u32 adv; + int lpa; + + rtl_writephy(tp, 0x1f, 0x0000); + lpa = rtl_readphy(tp, MII_LPA); + + if (lpa & (LPA_10HALF | LPA_10FULL)) + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full; + else if (lpa & (LPA_100HALF | LPA_100FULL)) + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; + else + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | + (tp->mii.supports_gmii ? + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full : 0); + + rtl8169_set_speed(tp->dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL, + adv); +} + static void rtl_wol_suspend_quirk(struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; @@ -3848,9 +3872,7 @@ static bool rtl_wol_pll_power_down(struct rtl8169_private *tp) if (!(__rtl8169_get_wol(tp) & WAKE_ANY)) return false; - rtl_writephy(tp, 0x1f, 0x0000); - rtl_writephy(tp, MII_BMCR, 0x0000); - + rtl_speed_down(tp); rtl_wol_suspend_quirk(tp); return true; -- cgit v1.2.1 From 4543fbefe6e06a9e40d9f2b28d688393a299f079 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 2 Apr 2013 17:10:07 -0400 Subject: net: count hw_addr syncs so that unsync works properly. A few drivers use dev_uc_sync/unsync to synchronize the address lists from master down to slave/lower devices. In some cases (bond/team) a single address list is synched down to multiple devices. At the time of unsync, we have a leak in these lower devices, because "synced" is treated as a boolean and the address will not be unsynced for anything after the first device/call. Treat "synced" as a count (same as refcount) and allow all unsync calls to work. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- net/core/dev_addr_lists.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 8bfa95600e48..6151e903eef0 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -210,9 +210,9 @@ struct netdev_hw_addr { #define NETDEV_HW_ADDR_T_SLAVE 3 #define NETDEV_HW_ADDR_T_UNICAST 4 #define NETDEV_HW_ADDR_T_MULTICAST 5 - bool synced; bool global_use; int refcount; + int synced; struct rcu_head rcu_head; }; diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index bd2eb9d3e369..abdc9e6ef33e 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -37,7 +37,7 @@ static int __hw_addr_create_ex(struct netdev_hw_addr_list *list, ha->type = addr_type; ha->refcount = 1; ha->global_use = global; - ha->synced = false; + ha->synced = 0; list_add_tail_rcu(&ha->list, &list->list); list->count++; @@ -165,7 +165,7 @@ int __hw_addr_sync(struct netdev_hw_addr_list *to_list, addr_len, ha->type); if (err) break; - ha->synced = true; + ha->synced++; ha->refcount++; } else if (ha->refcount == 1) { __hw_addr_del(to_list, ha->addr, addr_len, ha->type); @@ -186,7 +186,7 @@ void __hw_addr_unsync(struct netdev_hw_addr_list *to_list, if (ha->synced) { __hw_addr_del(to_list, ha->addr, addr_len, ha->type); - ha->synced = false; + ha->synced--; __hw_addr_del(from_list, ha->addr, addr_len, ha->type); } -- cgit v1.2.1 From 31d1670e73f4911fe401273a8f576edc9c2b5fea Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Tue, 2 Apr 2013 14:36:46 +0000 Subject: atl1e: limit gso segment size to prevent generation of wrong ip length fields The limit of 0x3c00 is taken from the windows driver. Suggested-by: Huang, Xiong Cc: Huang, Xiong Cc: Eric Dumazet Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1e/atl1e.h | 2 +- drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h index edfdf6b950e7..b5fd934585e9 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e.h +++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h @@ -186,7 +186,7 @@ struct atl1e_tpd_desc { /* how about 0x2000 */ #define MAX_TX_BUF_LEN 0x2000 #define MAX_TX_BUF_SHIFT 13 -/*#define MAX_TX_BUF_LEN 0x3000 */ +#define MAX_TSO_SEG_SIZE 0x3c00 /* rrs word 1 bit 0:31 */ #define RRS_RX_CSUM_MASK 0xFFFF diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index f73d5609439a..ac25f05ff68f 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -2329,6 +2329,7 @@ static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_WORK(&adapter->reset_task, atl1e_reset_task); INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task); + netif_set_gso_max_size(netdev, MAX_TSO_SEG_SIZE); err = register_netdev(netdev); if (err) { netdev_err(netdev, "register netdevice failed\n"); -- cgit v1.2.1 From 4de79c737b200492195ebc54a887075327e1ec1d Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Wed, 3 Apr 2013 05:46:33 +0000 Subject: bonding: remove sysfs before removing devices We have a race condition if we try to rmmod bonding and simultaneously add a bond master through sysfs. In bonding_exit() we first remove the devices (through rtnl_link_unregister() ) and only after that we remove the sysfs. If we manage to add a device through sysfs after that the devices were removed - we'll end up with that device/sysfs structure and with the module unloaded. Fix this by first removing the sysfs and only after that calling rtnl_link_unregister(). Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a51241b2e621..171b10f167a5 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4902,8 +4902,8 @@ static void __exit bonding_exit(void) bond_destroy_debugfs(); - rtnl_link_unregister(&bond_link_ops); unregister_pernet_subsys(&bond_net_ops); + rtnl_link_unregister(&bond_link_ops); #ifdef CONFIG_NET_POLL_CONTROLLER /* -- cgit v1.2.1 From 25da0e3e9d3fb2b522bc2a598076735850310eb1 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 3 Apr 2013 16:13:35 +0000 Subject: Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" This reverts commit 14134f6584212d585b310ce95428014b653dfaf6. The problem that the above patch was meant to address is that af_unix messages are not being coallesced because we are sending unnecesarry credentials. Not sending credentials in maybe_add_creds totally breaks unconnected unix domain sockets that wish to send credentails to other sockets. In practice this break some versions of udev because they receive a message and the sending uid is bogus so they drop the message. Reported-by: Sven Joachim Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- net/unix/af_unix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 971282b6f6a3..f153a8d6e339 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1412,8 +1412,8 @@ static void maybe_add_creds(struct sk_buff *skb, const struct socket *sock, if (UNIXCB(skb).cred) return; if (test_bit(SOCK_PASSCRED, &sock->flags) || - (other->sk_socket && - test_bit(SOCK_PASSCRED, &other->sk_socket->flags))) { + !other->sk_socket || + test_bit(SOCK_PASSCRED, &other->sk_socket->flags)) { UNIXCB(skb).pid = get_pid(task_tgid(current)); UNIXCB(skb).cred = get_current_cred(); } -- cgit v1.2.1 From 0e82e7f6dfeec1013339612f74abc2cdd29d43d2 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 3 Apr 2013 16:14:47 +0000 Subject: af_unix: If we don't care about credentials coallesce all messages It was reported that the following LSB test case failed https://lsbbugs.linuxfoundation.org/attachment.cgi?id=2144 because we were not coallescing unix stream messages when the application was expecting us to. The problem was that the first send was before the socket was accepted and thus sock->sk_socket was NULL in maybe_add_creds, and the second send after the socket was accepted had a non-NULL value for sk->socket and thus we could tell the credentials were not needed so we did not bother. The unnecessary credentials on the first message cause unix_stream_recvmsg to start verifying that all messages had the same credentials before coallescing and then the coallescing failed because the second message had no credentials. Ignoring credentials when we don't care in unix_stream_recvmsg fixes a long standing pessimization which would fail to coallesce messages when reading from a unix stream socket if the senders were different even if we did not care about their credentials. I have tested this and verified that the in the LSB test case mentioned above that the messages do coallesce now, while the were failing to coallesce without this change. Reported-by: Karel Srot Reported-by: Ding Tianhong Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- net/unix/af_unix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index f153a8d6e339..2db702d82e7d 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1993,7 +1993,7 @@ again: if ((UNIXCB(skb).pid != siocb->scm->pid) || (UNIXCB(skb).cred != siocb->scm->cred)) break; - } else { + } else if (test_bit(SOCK_PASSCRED, &sock->flags)) { /* Copy credentials */ scm_set_cred(siocb->scm, UNIXCB(skb).pid, UNIXCB(skb).cred); check_creds = 1; -- cgit v1.2.1 From f01fc1a82c2ee68726b400fadb156bd623b5f2f1 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 3 Apr 2013 16:50:54 +0000 Subject: ixgbe: fix registration order of driver and DCA nofitication ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable Signed-off-by: Jakub Kicinski Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index db5611ae407e..79f4a26ea6cc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7922,12 +7922,19 @@ static int __init ixgbe_init_module(void) ixgbe_dbg_init(); #endif /* CONFIG_DEBUG_FS */ + ret = pci_register_driver(&ixgbe_driver); + if (ret) { +#ifdef CONFIG_DEBUG_FS + ixgbe_dbg_exit(); +#endif /* CONFIG_DEBUG_FS */ + return ret; + } + #ifdef CONFIG_IXGBE_DCA dca_register_notify(&dca_notifier); #endif - ret = pci_register_driver(&ixgbe_driver); - return ret; + return 0; } module_init(ixgbe_init_module); -- cgit v1.2.1 From 34e2ed34a035de07277cca817fe8264324398141 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 4 Apr 2013 08:33:00 +0000 Subject: net: ipv4: notify when address lifetime changes if userspace changes lifetime of address, send netlink notification and call notifier. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index f678507bc829..96083b7a436b 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -802,8 +802,10 @@ static int inet_rtm_newaddr(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg if (nlh->nlmsg_flags & NLM_F_EXCL || !(nlh->nlmsg_flags & NLM_F_REPLACE)) return -EEXIST; - - set_ifa_lifetime(ifa_existing, valid_lft, prefered_lft); + ifa = ifa_existing; + set_ifa_lifetime(ifa, valid_lft, prefered_lft); + rtmsg_ifa(RTM_NEWADDR, ifa, nlh, NETLINK_CB(skb).portid); + blocking_notifier_call_chain(&inetaddr_chain, NETDEV_UP, ifa); } return 0; } -- cgit v1.2.1 From 868211db6df96ddae411fcd800502725beef8387 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 4 Apr 2013 22:32:10 +0200 Subject: ALSA: hda/generic - fix uninitialized variable changed is not initialized in path_power_down_sync, but it is expected to be false in case no change happened in the loop. So set it to false. Signed-off-by: Jiri Slaby Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 43c2ea539561..2dbe767be16b 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -740,7 +740,7 @@ EXPORT_SYMBOL_HDA(snd_hda_activate_path); static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path) { struct hda_gen_spec *spec = codec->spec; - bool changed; + bool changed = false; int i; if (!spec->power_down_unused || path->active) -- cgit v1.2.1 From b39599b7cb8f295205b04827ff82e3afec687cde Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 6 Mar 2013 16:56:48 -0600 Subject: remoteproc: fix the error check for idr_alloc The new idr_alloc interface returns the allocated id back on success, so fix the error path to check for negative values. This was missed out in the newer idr interface adoption patch, 15fc611 "remoteproc: convert to idr_alloc()". Signed-off-by: Suman Anna Acked-by: Tejun Heo Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/remoteproc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 29387df4bfc9..fb0fb342bf96 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -217,7 +217,7 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i) * TODO: support predefined notifyids (via resource table) */ ret = idr_alloc(&rproc->notifyids, rvring, 0, 0, GFP_KERNEL); - if (ret) { + if (ret < 0) { dev_err(dev, "idr_alloc failed: %d\n", ret); dma_free_coherent(dev->parent, size, va, dma); return ret; -- cgit v1.2.1 From 1cd425b660bd5b4f41b9175b0b7bf3828ce88144 Mon Sep 17 00:00:00 2001 From: Dmitry Tarnyagin Date: Sun, 10 Feb 2013 12:39:04 +0100 Subject: remoteproc/ste: fix memory leak on shutdown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes coherent memory leakage, caused by non-deallocated firmware image chunk. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Tarnyagin Signed-off-by: Sjur Brændeland Acked-by: Ido Yariv [slightly edit subject and commit log] Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/ste_modem_rproc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c index a7743c069339..fb95c4220052 100644 --- a/drivers/remoteproc/ste_modem_rproc.c +++ b/drivers/remoteproc/ste_modem_rproc.c @@ -240,6 +240,8 @@ static int sproc_drv_remove(struct platform_device *pdev) /* Unregister as remoteproc device */ rproc_del(sproc->rproc); + dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE, + sproc->fw_addr, sproc->fw_dma_addr); rproc_put(sproc->rproc); mdev->drv_data = NULL; @@ -297,10 +299,13 @@ static int sproc_probe(struct platform_device *pdev) /* Register as a remoteproc device */ err = rproc_add(rproc); if (err) - goto free_rproc; + goto free_mem; return 0; +free_mem: + dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE, + sproc->fw_addr, sproc->fw_dma_addr); free_rproc: /* Reset device data upon error */ mdev->drv_data = NULL; -- cgit v1.2.1 From cde42e076c1cdd69a1f955d66ff6596bad3d2105 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sjur=20Br=C3=A6ndeland?= Date: Thu, 21 Feb 2013 18:15:32 +0100 Subject: remoteproc: fix error path of handle_vdev MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the vdev entry from the list before freeing it, otherwise rproc->vdevs will explode. Cc: stable@vger.kernel.org Signed-off-by: Sjur Brændeland Acked-by: Ido Yariv [edit subject, minor commit log edit, cc stable] Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/remoteproc_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index fb0fb342bf96..8edb4aed5d36 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -366,10 +366,12 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc, /* it is now safe to add the virtio device */ ret = rproc_add_virtio_dev(rvdev, rsc->id); if (ret) - goto free_rvdev; + goto remove_rvdev; return 0; +remove_rvdev: + list_del(&rvdev->node); free_rvdev: kfree(rvdev); return ret; -- cgit v1.2.1 From d47cbd5bcee7c7a08fc0283dda465375fa1b1fda Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 5 Apr 2013 14:06:35 +0200 Subject: crypto: ux500 - add missing comma Commit 4f31f5b19eb0418a847b989abc9ac22af1991fe2 "PM / crypto / ux500: Use struct dev_pm_ops for power management" add a new line to the driver struct but missed to add a trailing comma, causing build errors when crypto is selected. This adds the missing comma. This was not noticed until now because the crypto block is not in the ux500 defconfig. A separate patch will be submitted to fix this. Cc: # 3.8.x Cc: Rafael J. Wysocki Cc: Magnus Myrstedt Signed-off-by: Linus Walleij Signed-off-by: Herbert Xu --- drivers/crypto/ux500/cryp/cryp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index 8bc5fef07e7a..22c9063e0120 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -1750,7 +1750,7 @@ static struct platform_driver cryp_driver = { .shutdown = ux500_cryp_shutdown, .driver = { .owner = THIS_MODULE, - .name = "cryp1" + .name = "cryp1", .pm = &ux500_cryp_pm, } }; -- cgit v1.2.1 From ad8c396936e328f5344e1881afde9e28d5f2045f Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 2 Apr 2013 22:59:29 +0000 Subject: MIPS: Unbreak function tracer for 64-bit kernel. Commit 58b69401c797 [MIPS: Function tracer: Fix broken function tracing] completely broke the function tracer for 64-bit kernels. The symptom is a system hang very early in the boot process. The fix: Remove/fix $sp adjustments for 64-bit case. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: Al Cooper Cc: viric@viric.name Cc: stable@vger.kernel.org # 3.8.x Signed-off-by: Ralf Baechle --- arch/mips/kernel/mcount.S | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index 165867673357..33d067148e61 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -46,10 +46,9 @@ PTR_L a5, PT_R9(sp) PTR_L a6, PT_R10(sp) PTR_L a7, PT_R11(sp) -#else - PTR_ADDIU sp, PT_SIZE #endif -.endm + PTR_ADDIU sp, PT_SIZE + .endm .macro RETURN_BACK jr ra @@ -68,7 +67,11 @@ NESTED(ftrace_caller, PT_SIZE, ra) .globl _mcount _mcount: b ftrace_stub - addiu sp,sp,8 +#ifdef CONFIG_32BIT + addiu sp,sp,8 +#else + nop +#endif /* When tracing is activated, it calls ftrace_caller+8 (aka here) */ lw t1, function_trace_stop -- cgit v1.2.1 From 143f0f659986f921731ab340d9415be479762c1a Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 4 Apr 2013 12:47:01 +0000 Subject: MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" Commit 7517de348663b08a808aff44b5300e817157a568 ("MIPS: Alchemy: Redo PCI as platform driver") added a reference to CONFIG_DEBUG_PCI. Change it to CONFIG_PCI_DEBUG, as that is a valid Kconfig macro. Also add a newline to a debugging printk that this fix enables. Signed-off-by: Paul Bolle Cc: Sergei Shtylyov Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-alchemy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index 38a80c83fd67..d1faece21b6a 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -19,7 +19,7 @@ #include #include -#ifdef CONFIG_DEBUG_PCI +#ifdef CONFIG_PCI_DEBUG #define DBG(x...) printk(KERN_DEBUG x) #else #define DBG(x...) do {} while (0) @@ -162,7 +162,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, if (status & (1 << 29)) { *data = 0xffffffff; error = -1; - DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d", + DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n", access_type, bus->number, device); } else if ((status >> 28) & 0xf) { DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n", -- cgit v1.2.1 From aaa9fad32fa80878e6935c5668098c9b55b31458 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 25 Mar 2013 09:39:54 +0000 Subject: MIPS: Kconfig: Rename SNIPROM too CONFIG_SNIPROM was renamed to CONFIG_FW_SNIPROM in v3.8. Let's rename SNIPROM itself too. Signed-off-by: Paul Bolle Cc: linux-mips@linux-mips.org; Cc: linux-kernel@vger.kernel.org Cc: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cd2e21ff562a..b2df47604759 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -657,7 +657,7 @@ config SNI_RM bool "SNI RM200/300/400" select FW_ARC if CPU_LITTLE_ENDIAN select FW_ARC32 if CPU_LITTLE_ENDIAN - select SNIPROM if CPU_BIG_ENDIAN + select FW_SNIPROM if CPU_BIG_ENDIAN select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select CEVT_R4K @@ -1144,7 +1144,7 @@ config DEFAULT_SGI_PARTITION config FW_ARC32 bool -config SNIPROM +config FW_SNIPROM bool config BOOT_ELF32 -- cgit v1.2.1 From ed1197f9317c960a199f491779e056c572506dd3 Mon Sep 17 00:00:00 2001 From: EunBong Song Date: Sun, 24 Mar 2013 22:18:35 +0000 Subject: MIPS: Fix build error cavium-octeon without CONFIG_SMP Singed-off-by: EunBong Song Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index c594a3d4f743..b0baa299f899 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -174,7 +174,10 @@ static int octeon_kexec_prepare(struct kimage *image) static void octeon_generic_shutdown(void) { - int cpu, i; + int i; +#ifdef CONFIG_SMP + int cpu; +#endif struct cvmx_bootmem_desc *bootmem_desc; void *named_block_array_ptr; -- cgit v1.2.1 From adb3789264c4e8567113a0e764ad30ce6e8737f3 Mon Sep 17 00:00:00 2001 From: Deng-Cheng Zhu Date: Mon, 1 Apr 2013 18:14:28 +0000 Subject: MIPS: Fix ISA level which causes secondary cache init bypassing and more The commit a96102be70 introduced set_isa() where compatible ISA info is also set aside from the one gets passed in. It means, for example, 1004K will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like the following inappropriate: if (c->isa_level == MIPS_CPU_ISA_M32R1 || c->isa_level == MIPS_CPU_ISA_M32R2 || c->isa_level == MIPS_CPU_ISA_M64R1 || c->isa_level == MIPS_CPU_ISA_M64R2) This patch fixes it. Signed-off-by: Deng-Cheng Zhu Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 6 ++---- arch/mips/kernel/traps.c | 2 +- arch/mips/mm/c-r4k.c | 6 ++---- arch/mips/mm/sc-mips.c | 6 ++---- 4 files changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 6bfccc227a95..ed80c3844345 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -1226,10 +1226,8 @@ __cpuinit void cpu_probe(void) if (c->options & MIPS_CPU_FPU) { c->fpu_id = cpu_get_fpu_id(); - if (c->isa_level == MIPS_CPU_ISA_M32R1 || - c->isa_level == MIPS_CPU_ISA_M32R2 || - c->isa_level == MIPS_CPU_ISA_M64R1 || - c->isa_level == MIPS_CPU_ISA_M64R2) { + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | + MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) { if (c->fpu_id & MIPS_FPIR_3D) c->ases |= MIPS_ASE_MIPS3D; } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index a200b5bdbb87..c3abb88170fc 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1571,7 +1571,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) #ifdef CONFIG_64BIT status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX; #endif - if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) + if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV) status_set |= ST0_XX; if (cpu_has_dsp) status_set |= ST0_MX; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index ecca559b8d7b..2078915eacb9 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1247,10 +1247,8 @@ static void __cpuinit setup_scache(void) return; default: - if (c->isa_level == MIPS_CPU_ISA_M32R1 || - c->isa_level == MIPS_CPU_ISA_M32R2 || - c->isa_level == MIPS_CPU_ISA_M64R1 || - c->isa_level == MIPS_CPU_ISA_M64R2) { + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | + MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) { #ifdef CONFIG_MIPS_CPU_SCACHE if (mips_sc_init ()) { scache_size = c->scache.ways * c->scache.sets * c->scache.linesz; diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 93d937b4b1ba..df96da7e939b 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -98,10 +98,8 @@ static inline int __init mips_sc_probe(void) c->scache.flags |= MIPS_CACHE_NOT_PRESENT; /* Ignore anything but MIPSxx processors */ - if (c->isa_level != MIPS_CPU_ISA_M32R1 && - c->isa_level != MIPS_CPU_ISA_M32R2 && - c->isa_level != MIPS_CPU_ISA_M64R1 && - c->isa_level != MIPS_CPU_ISA_M64R2) + if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | + MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2))) return 0; /* Does this MIPS32/MIPS64 CPU have a config2 register? */ -- cgit v1.2.1 From 80fa8181aabeb10389c8810f97e2737eb084ce8f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 25 Mar 2013 13:43:14 +0100 Subject: MIPS: Delete definition of SA_RESTORER. SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever supported its use and no libc was using it, so the entire sa-restorer functionality was removed with lmo commit 39bffc12c3580ab [Zap sa_restorer.] for 2.5.48 retaining only the SA_RESTORER definition as a reminder to avoid accidental reuse of the mask bit. Upstream cdef9602fbf1871a43f0f1b5cea10dd0f275167d [signal: always clear sa_restorer on execve] adds code that assumes sa_sigaction has an sa_restorer field, if SA_RESTORER is defined which would break MIPS. So remove the SA_RESTORER definition before the v3.8.4 merge. Signed-off-by: Ralf Baechle (cherry picked from commit 17da8d63add23830892ac4dc2cbb3b5d4ffb79a8) --- arch/mips/include/uapi/asm/signal.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h index d6b18b4d0f3a..addb9f556b71 100644 --- a/arch/mips/include/uapi/asm/signal.h +++ b/arch/mips/include/uapi/asm/signal.h @@ -72,6 +72,12 @@ typedef unsigned long old_sigset_t; /* at least 32 bits */ * * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single * Unix names RESETHAND and NODEFER respectively. + * + * SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever + * supported its use and no libc was using it, so the entire sa-restorer + * functionality was removed with lmo commit 39bffc12c3580ab for 2.5.48 + * retaining only the SA_RESTORER definition as a reminder to avoid + * accidental reuse of the mask bit. */ #define SA_ONSTACK 0x08000000 #define SA_RESETHAND 0x80000000 @@ -84,8 +90,6 @@ typedef unsigned long old_sigset_t; /* at least 32 bits */ #define SA_NOMASK SA_NODEFER #define SA_ONESHOT SA_RESETHAND -#define SA_RESTORER 0x04000000 /* Only for o32 */ - #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 -- cgit v1.2.1 From b844fe691897221ad0d5e0279c8ea9e3e4a46982 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 5 Apr 2013 15:36:32 +0100 Subject: dm cache: fix writes to cache device in writethrough mode The dm-cache writethrough strategy introduced by commit e2e74d617eadc15 ("dm cache: fix race in writethrough implementation") issues a bio to the origin device, remaps and then issues the bio to the cache device. This more conservative in-series approach was selected to favor correctness over performance (of the previous parallel writethrough). However, this in-series implementation that reuses the same bio to write both the origin and cache device didn't take into account that the block layer's req_bio_endio() modifies a completing bio's bi_sector and bi_size. So the new writethrough strategy needs to preserve these bio fields, and restore them before submission to the cache device, otherwise nothing gets written to the cache (because bi_size is 0). This patch adds a struct dm_bio_details field to struct per_bio_data, and uses dm_bio_record() and dm_bio_restore() to ensure the bio is restored before reissuing to the cache device. Adding such a large structure to the per_bio_data is not ideal but we can improve this later, for now correctness is the important thing. This problem initially went unnoticed because the dm-cache test-suite uses a linear DM device for the dm-cache device's origin device. Writethrough worked as expected because DM submits a *clone* of the original bio, so the original bio which was reused for the cache was never touched. Signed-off-by: Darrick J. Wong Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-cache-target.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 66120bd46d15..1ab122a75764 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -6,6 +6,7 @@ #include "dm.h" #include "dm-bio-prison.h" +#include "dm-bio-record.h" #include "dm-cache-metadata.h" #include @@ -205,6 +206,7 @@ struct per_bio_data { struct cache *cache; dm_cblock_t cblock; bio_end_io_t *saved_bi_end_io; + struct dm_bio_details bio_details; }; struct dm_cache_migration { @@ -643,6 +645,7 @@ static void writethrough_endio(struct bio *bio, int err) return; } + dm_bio_restore(&pb->bio_details, bio); remap_to_cache(pb->cache, bio, pb->cblock); /* @@ -667,6 +670,7 @@ static void remap_to_origin_then_cache(struct cache *cache, struct bio *bio, pb->cache = cache; pb->cblock = cblock; pb->saved_bi_end_io = bio->bi_end_io; + dm_bio_record(&pb->bio_details, bio); bio->bi_end_io = writethrough_endio; remap_to_origin_clear_discard(pb->cache, bio, oblock); -- cgit v1.2.1 From 19b0092e265fe9ab129902373c3127c0e0be3376 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 5 Apr 2013 15:36:34 +0100 Subject: dm cache: reduce bio front_pad size in writeback mode A recent patch to fix the dm cache target's writethrough mode extended the bio's front_pad to include a 1056-byte struct dm_bio_details. Writeback mode doesn't need this, so this patch reduces the per_bio_data_size to 16 bytes in this case instead of 1096. The dm_bio_details structure was added in "dm cache: fix writes to cache device in writethrough mode" which fixed commit e2e74d617e ("dm cache: fix race in writethrough implementation"). In writeback mode we avoid allocating the writethrough-specific members of the per_bio_data structure (the dm_bio_details structure included). Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-cache-target.c | 47 ++++++++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 13 deletions(-) diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 1ab122a75764..10744091e6ca 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -202,7 +202,11 @@ struct per_bio_data { unsigned req_nr:2; struct dm_deferred_entry *all_io_entry; - /* writethrough fields */ + /* + * writethrough fields. These MUST remain at the end of this + * structure and the 'cache' member must be the first as it + * is used to determine the offsetof the writethrough fields. + */ struct cache *cache; dm_cblock_t cblock; bio_end_io_t *saved_bi_end_io; @@ -515,16 +519,28 @@ static void save_stats(struct cache *cache) /*---------------------------------------------------------------- * Per bio data *--------------------------------------------------------------*/ -static struct per_bio_data *get_per_bio_data(struct bio *bio) + +/* + * If using writeback, leave out struct per_bio_data's writethrough fields. + */ +#define PB_DATA_SIZE_WB (offsetof(struct per_bio_data, cache)) +#define PB_DATA_SIZE_WT (sizeof(struct per_bio_data)) + +static size_t get_per_bio_data_size(struct cache *cache) +{ + return cache->features.write_through ? PB_DATA_SIZE_WT : PB_DATA_SIZE_WB; +} + +static struct per_bio_data *get_per_bio_data(struct bio *bio, size_t data_size) { - struct per_bio_data *pb = dm_per_bio_data(bio, sizeof(struct per_bio_data)); + struct per_bio_data *pb = dm_per_bio_data(bio, data_size); BUG_ON(!pb); return pb; } -static struct per_bio_data *init_per_bio_data(struct bio *bio) +static struct per_bio_data *init_per_bio_data(struct bio *bio, size_t data_size) { - struct per_bio_data *pb = get_per_bio_data(bio); + struct per_bio_data *pb = get_per_bio_data(bio, data_size); pb->tick = false; pb->req_nr = dm_bio_get_target_bio_nr(bio); @@ -558,7 +574,8 @@ static void remap_to_cache(struct cache *cache, struct bio *bio, static void check_if_tick_bio_needed(struct cache *cache, struct bio *bio) { unsigned long flags; - struct per_bio_data *pb = get_per_bio_data(bio); + size_t pb_data_size = get_per_bio_data_size(cache); + struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size); spin_lock_irqsave(&cache->lock, flags); if (cache->need_tick_bio && @@ -637,7 +654,7 @@ static void defer_writethrough_bio(struct cache *cache, struct bio *bio) static void writethrough_endio(struct bio *bio, int err) { - struct per_bio_data *pb = get_per_bio_data(bio); + struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT); bio->bi_end_io = pb->saved_bi_end_io; if (err) { @@ -665,7 +682,7 @@ static void writethrough_endio(struct bio *bio, int err) static void remap_to_origin_then_cache(struct cache *cache, struct bio *bio, dm_oblock_t oblock, dm_cblock_t cblock) { - struct per_bio_data *pb = get_per_bio_data(bio); + struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT); pb->cache = cache; pb->cblock = cblock; @@ -1039,7 +1056,8 @@ static void defer_bio(struct cache *cache, struct bio *bio) static void process_flush_bio(struct cache *cache, struct bio *bio) { - struct per_bio_data *pb = get_per_bio_data(bio); + size_t pb_data_size = get_per_bio_data_size(cache); + struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size); BUG_ON(bio->bi_size); if (!pb->req_nr) @@ -1111,7 +1129,8 @@ static void process_bio(struct cache *cache, struct prealloc *structs, dm_oblock_t block = get_bio_block(cache, bio); struct dm_bio_prison_cell *cell_prealloc, *old_ocell, *new_ocell; struct policy_result lookup_result; - struct per_bio_data *pb = get_per_bio_data(bio); + size_t pb_data_size = get_per_bio_data_size(cache); + struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size); bool discarded_block = is_discarded_oblock(cache, block); bool can_migrate = discarded_block || spare_migration_bandwidth(cache); @@ -1885,7 +1904,6 @@ static int cache_create(struct cache_args *ca, struct cache **result) cache->ti = ca->ti; ti->private = cache; - ti->per_bio_data_size = sizeof(struct per_bio_data); ti->num_flush_bios = 2; ti->flush_supported = true; @@ -1894,6 +1912,7 @@ static int cache_create(struct cache_args *ca, struct cache **result) ti->discard_zeroes_data_unsupported = true; memcpy(&cache->features, &ca->features, sizeof(cache->features)); + ti->per_bio_data_size = get_per_bio_data_size(cache); cache->callbacks.congested_fn = cache_is_congested; dm_table_add_target_callbacks(ti->table, &cache->callbacks); @@ -2096,6 +2115,7 @@ static int cache_map(struct dm_target *ti, struct bio *bio) int r; dm_oblock_t block = get_bio_block(cache, bio); + size_t pb_data_size = get_per_bio_data_size(cache); bool can_migrate = false; bool discarded_block; struct dm_bio_prison_cell *cell; @@ -2112,7 +2132,7 @@ static int cache_map(struct dm_target *ti, struct bio *bio) return DM_MAPIO_REMAPPED; } - pb = init_per_bio_data(bio); + pb = init_per_bio_data(bio, pb_data_size); if (bio->bi_rw & (REQ_FLUSH | REQ_FUA | REQ_DISCARD)) { defer_bio(cache, bio); @@ -2197,7 +2217,8 @@ static int cache_end_io(struct dm_target *ti, struct bio *bio, int error) { struct cache *cache = ti->private; unsigned long flags; - struct per_bio_data *pb = get_per_bio_data(bio); + size_t pb_data_size = get_per_bio_data_size(cache); + struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size); if (pb->tick) { policy_tick(cache->policy); -- cgit v1.2.1 From c10b90d85a5126d25c89cbaa50dc9fdd1c4d001a Mon Sep 17 00:00:00 2001 From: Li Fei Date: Fri, 5 Apr 2013 21:20:36 +0800 Subject: hwspinlock: fix __hwspin_lock_request error path Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put_noidle in such case. In __hwspin_lock_request, module_put is also called before return in pm_runtime_get_sync failed case. Cc: stable@vger.kernel.org Signed-off-by Liu Chuansheng Signed-off-by: Li Fei [edit commit log] Signed-off-by: Ohad Ben-Cohen --- drivers/hwspinlock/hwspinlock_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c index db713c0dfba4..461a0d739d75 100644 --- a/drivers/hwspinlock/hwspinlock_core.c +++ b/drivers/hwspinlock/hwspinlock_core.c @@ -416,6 +416,8 @@ static int __hwspin_lock_request(struct hwspinlock *hwlock) ret = pm_runtime_get_sync(dev); if (ret < 0) { dev_err(dev, "%s: can't power on device\n", __func__); + pm_runtime_put_noidle(dev); + module_put(dev->driver->owner); return ret; } -- cgit v1.2.1 From e24b0bfa2f0446ffaad2661040be23668133aef8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Apr 2013 18:16:34 +0200 Subject: Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR" This reverts commit 0ef1594c017521ea89278e80fe3f80dafb17abde. This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Nicolas Ferre Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-at91rm9200.c | 50 +++++++++++++++++--------------------------- drivers/rtc/rtc-at91rm9200.h | 1 + 2 files changed, 20 insertions(+), 31 deletions(-) diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 0a9f27e094ea..434ebc3a99dc 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -44,7 +44,6 @@ static DECLARE_COMPLETION(at91_rtc_updated); static unsigned int at91_alarm_year = AT91_RTC_EPOCH; static void __iomem *at91_rtc_regs; static int irq; -static u32 at91_rtc_imr; /* * Decode time/date into rtc_time structure @@ -109,11 +108,9 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) cr = at91_rtc_read(AT91_RTC_CR); at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); - at91_rtc_imr |= AT91_RTC_ACKUPD; at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD); wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD); - at91_rtc_imr &= ~AT91_RTC_ACKUPD; at91_rtc_write(AT91_RTC_TIMR, bin2bcd(tm->tm_sec) << 0 @@ -145,7 +142,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); tm->tm_year = at91_alarm_year - 1900; - alrm->enabled = (at91_rtc_imr & AT91_RTC_ALARM) + alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM) ? 1 : 0; dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, @@ -171,7 +168,6 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) tm.tm_sec = alrm->time.tm_sec; at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); - at91_rtc_imr &= ~AT91_RTC_ALARM; at91_rtc_write(AT91_RTC_TIMALR, bin2bcd(tm.tm_sec) << 0 | bin2bcd(tm.tm_min) << 8 @@ -184,7 +180,6 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) if (alrm->enabled) { at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_rtc_imr |= AT91_RTC_ALARM; at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); } @@ -201,12 +196,9 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) if (enabled) { at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_rtc_imr |= AT91_RTC_ALARM; at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); - } else { + } else at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); - at91_rtc_imr &= ~AT91_RTC_ALARM; - } return 0; } @@ -215,10 +207,12 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) */ static int at91_rtc_proc(struct device *dev, struct seq_file *seq) { + unsigned long imr = at91_rtc_read(AT91_RTC_IMR); + seq_printf(seq, "update_IRQ\t: %s\n", - (at91_rtc_imr & AT91_RTC_ACKUPD) ? "yes" : "no"); + (imr & AT91_RTC_ACKUPD) ? "yes" : "no"); seq_printf(seq, "periodic_IRQ\t: %s\n", - (at91_rtc_imr & AT91_RTC_SECEV) ? "yes" : "no"); + (imr & AT91_RTC_SECEV) ? "yes" : "no"); return 0; } @@ -233,7 +227,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) unsigned int rtsr; unsigned long events = 0; - rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_imr; + rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR); if (rtsr) { /* this interrupt is shared! Is it ours? */ if (rtsr & AT91_RTC_ALARM) events |= (RTC_AF | RTC_IRQF); @@ -297,7 +291,6 @@ static int __init at91_rtc_probe(struct platform_device *pdev) at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); - at91_rtc_imr = 0; ret = request_irq(irq, at91_rtc_interrupt, IRQF_SHARED, @@ -336,7 +329,6 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); - at91_rtc_imr = 0; free_irq(irq, pdev); rtc_device_unregister(rtc); @@ -349,35 +341,31 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) /* AT91RM9200 RTC Power management control */ -static u32 at91_rtc_bkpimr; - +static u32 at91_rtc_imr; static int at91_rtc_suspend(struct device *dev) { /* this IRQ is shared with DBGU and other hardware which isn't * necessarily doing PM like we are... */ - at91_rtc_bkpimr = at91_rtc_imr & (AT91_RTC_ALARM|AT91_RTC_SECEV); - if (at91_rtc_bkpimr) { - if (device_may_wakeup(dev)) { + at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR) + & (AT91_RTC_ALARM|AT91_RTC_SECEV); + if (at91_rtc_imr) { + if (device_may_wakeup(dev)) enable_irq_wake(irq); - } else { - at91_rtc_write(AT91_RTC_IDR, at91_rtc_bkpimr); - at91_rtc_imr &= ~at91_rtc_bkpimr; - } -} + else + at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr); + } return 0; } static int at91_rtc_resume(struct device *dev) { - if (at91_rtc_bkpimr) { - if (device_may_wakeup(dev)) { + if (at91_rtc_imr) { + if (device_may_wakeup(dev)) disable_irq_wake(irq); - } else { - at91_rtc_imr |= at91_rtc_bkpimr; - at91_rtc_write(AT91_RTC_IER, at91_rtc_bkpimr); - } + else + at91_rtc_write(AT91_RTC_IER, at91_rtc_imr); } return 0; } diff --git a/drivers/rtc/rtc-at91rm9200.h b/drivers/rtc/rtc-at91rm9200.h index 5f940b6844cb..da1945e5f714 100644 --- a/drivers/rtc/rtc-at91rm9200.h +++ b/drivers/rtc/rtc-at91rm9200.h @@ -64,6 +64,7 @@ #define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ #define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ #define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ +#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ #define AT91_RTC_VER 0x2c /* Valid Entry Register */ #define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -- cgit v1.2.1 From b2c87cae0edb1a99f7dd2751d5beb2cb97926514 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Fri, 22 Mar 2013 10:07:24 -0400 Subject: GFS2: Issue discards in 512b sectors This patch changes GFS2's discard issuing code so that it calls function sb_issue_discard rather than blkdev_issue_discard. The code was calling blkdev_issue_discard and specifying the correct sector offset and sector size, but blkdev_issue_discard expects these values to be in terms of 512 byte sectors, even if the native sector size for the device is different. Calling sb_issue_discard with the BLOCK size instead ensures the correct block-to-512b-sector translation. I verified that "minlen" is specified in blocks, so comparing it to a number of blocks is correct. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 70d1cd0b5f3b..5a51265a4341 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1181,12 +1181,9 @@ int gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset, const struct gfs2_bitmap *bi, unsigned minlen, u64 *ptrimmed) { struct super_block *sb = sdp->sd_vfs; - struct block_device *bdev = sb->s_bdev; - const unsigned int sects_per_blk = sdp->sd_sb.sb_bsize / - bdev_logical_block_size(sb->s_bdev); u64 blk; sector_t start = 0; - sector_t nr_sects = 0; + sector_t nr_blks = 0; int rv; unsigned int x; u32 trimmed = 0; @@ -1206,35 +1203,34 @@ int gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset, if (diff == 0) continue; blk = offset + ((bi->bi_start + x) * GFS2_NBBY); - blk *= sects_per_blk; /* convert to sectors */ while(diff) { if (diff & 1) { - if (nr_sects == 0) + if (nr_blks == 0) goto start_new_extent; - if ((start + nr_sects) != blk) { - if (nr_sects >= minlen) { - rv = blkdev_issue_discard(bdev, - start, nr_sects, + if ((start + nr_blks) != blk) { + if (nr_blks >= minlen) { + rv = sb_issue_discard(sb, + start, nr_blks, GFP_NOFS, 0); if (rv) goto fail; - trimmed += nr_sects; + trimmed += nr_blks; } - nr_sects = 0; + nr_blks = 0; start_new_extent: start = blk; } - nr_sects += sects_per_blk; + nr_blks++; } diff >>= 2; - blk += sects_per_blk; + blk++; } } - if (nr_sects >= minlen) { - rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, 0); + if (nr_blks >= minlen) { + rv = sb_issue_discard(sb, start, nr_blks, GFP_NOFS, 0); if (rv) goto fail; - trimmed += nr_sects; + trimmed += nr_blks; } if (ptrimmed) *ptrimmed = trimmed; -- cgit v1.2.1 From ff802e31b5e60a9a39f70479947a27cea5da701c Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 5 Apr 2013 14:30:13 -0400 Subject: firmware,IB/qib: revert firmware file move Commit e2eed58b4fbf ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: David Woodhouse Signed-off-by: Mike Marciniszyn Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/qib/qib_sd7220.c | 2 +- firmware/Makefile | 2 +- firmware/intel/sd7220.fw.ihex | 513 --------------------------------- firmware/qlogic/sd7220.fw.ihex | 513 +++++++++++++++++++++++++++++++++ 4 files changed, 515 insertions(+), 515 deletions(-) delete mode 100644 firmware/intel/sd7220.fw.ihex create mode 100644 firmware/qlogic/sd7220.fw.ihex diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c index 08a6c6d39e56..911205d3d5a0 100644 --- a/drivers/infiniband/hw/qib/qib_sd7220.c +++ b/drivers/infiniband/hw/qib/qib_sd7220.c @@ -44,7 +44,7 @@ #include "qib.h" #include "qib_7220.h" -#define SD7220_FW_NAME "intel/sd7220.fw" +#define SD7220_FW_NAME "qlogic/sd7220.fw" MODULE_FIRMWARE(SD7220_FW_NAME); /* diff --git a/firmware/Makefile b/firmware/Makefile index 5d8ee1319b5c..cbb09ce9730a 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -82,7 +82,7 @@ fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \ qlogic/12160.bin fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin -fw-shipped-$(CONFIG_INFINIBAND_QIB) += intel/sd7220.fw +fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \ ess/maestro3_assp_minisrc.fw diff --git a/firmware/intel/sd7220.fw.ihex b/firmware/intel/sd7220.fw.ihex deleted file mode 100644 index a33636319112..000000000000 --- a/firmware/intel/sd7220.fw.ihex +++ /dev/null @@ -1,513 +0,0 @@ -:10000000020A29020A87E5E630E6047F0180027FC2 -:1000100000E5E230E4047E0180027E00EE5F6008CD -:1000200053F9F7E4F5FE80087F0A121731120EA289 -:1000300075FC08E4F5FDE5E720E70343F908220035 -:1000400001201100042000755101E4F552F553F52B -:1000500052F57E7F04020438C2360552E552D3942D -:100060000C4005755201D23690070C7407F0A3744A -:10007000FFF0E4F50CA3F0900714F0A3F0750B204B -:10008000F509E4F508E508D39430400302040412AE -:100090000006150BE50870047F0180027F00E5096A -:1000A00070047E0180027E00EE5F6005121871D23E -:1000B0003553E1F7E5084509FFE50B25E025E02488 -:1000C00083F582E43407F583EFF085E220E552D32F -:1000D0009401400D1219F3E054A064407003020330 -:1000E000FB53F9F8909470E4F0E0F510AF09121E9C -:1000F000B3AF08EF4408F582758380E0F529EF443B -:1001000007121A3CF5225440D39400401EE52954AE -:10011000F070211219F3E04480F0E52254306508B4 -:1001200070091219F3E054BFF080091219F37440FA -:10013000F00203FB121A127583AE74FFF0AF087E53 -:1001400000EF4407F582E0FDE50B25E025E0248182 -:10015000F582E43407F583EDF090070EE004F0EF4C -:100160004407F582758398E0F528121A23400C1293 -:1001700019F3E04401121A320203F6AF087E00744C -:1001800080CDEFCD8D82F583E030E00A1219F3E0E7 -:100190004420F00203FB1219F3E054DFF0EE44AE0A -:1001A000121A4330E4030203FB749E121A0520E086 -:1001B000030203FB8F828E83E020E0030203FB1225 -:1001C00019F3E04410F0E5E320E708E508121A3AD5 -:1001D0004404F0AF087E00EF121A3A20E2341219FC -:1001E000F3E04408F0E5E430E6047D0180027D00A0 -:1001F000E57EC3940450047C0180027C00EC4D60D9 -:1002000005C2350203FBEE44D2121A434440F00209 -:1002100003FB1219F3E054F7F0121A127583D2E0BF -:1002200054BFF0900714E004F0E57E7003757E0182 -:10023000AF087E00121A2340121219F3E044011293 -:1002400019F2E05402121A320203FB1219F3E044CD -:10025000021219F2E054FEF0C235EE448A8F82F5A4 -:1002600083E0F517548F4440F07490FCE508440790 -:10027000FDF5828C83E0543F900702F0E054C08D7E -:10028000828C83F07492121A05900703121A197463 -:1002900082121A05900704121A1974B4121A0590E2 -:1002A0000705121A197494FEE5084406121A0AF595 -:1002B0001030E004D2378002C237E510547F8F82BD -:1002C0008E83F0304430121A035480D394004004DB -:1002D000D2398002C2398F828E83E04480F0121AB4 -:1002E000035440D394004004D23A8002C23A8F8231 -:1002F0008E83E04440F07492FEE5084406121A0A28 -:1003000030E704D2388002C2388F828E83E0547F77 -:10031000F0121E46E4F50A20030280033043031264 -:1003200019952002028003304203120C8F303006F0 -:10033000121995120C8F120D471219F3E054FBF0AD -:10034000E50AC39401404643E1081219F3E044046E -:10035000F0E5E420E72A121A127583D2E05408D39C -:10036000940040047F0180027F00E50AC3940140AD -:10037000047E0180027E00EF5E6005121DD78017AB -:10038000121A127583D2E04408F00203FB121A120B -:100390007583D2E054F7F0121E467F0812173174AD -:1003A0008EFE121A128E83E0F51054FEF0E5104412 -:1003B00001FFE508FDED4407F582EFF0E51054FE7E -:1003C000FFED4407F582EF121A11758386E04410A1 -:1003D000121A11E04410F01219F3E054FD4401FF29 -:1003E0001219F3EF121A3230320CE5084408F58284 -:1003F0007583827405F0AF0B1218D774102508F5B9 -:10040000080200850509E509D3940750030200821C -:10041000E57ED3940040047F0180027F00E57EC327 -:1004200094FA50047E0180027E00EE5F6002057E39 -:1004300030350B43E1017F0912173102005853E1B7 -:10044000FE0200588E6A8F6B8C6C8D6D756E017517 -:100450006F01757001E4F573F574F57590072FF071 -:10046000F53CF53EF546F547F53DF53FF56FE56F93 -:10047000700FE56B456A12072A758380743AF08025 -:100480000912072A758380741AF0E4F56EC3743F6D -:10049000956EFF120865758382EFF0121A4D1208EF -:1004A000C6E533F01208FA1208B140E1E56F700BAF -:1004B00012072A7583807436F0800912072A758323 -:1004C000807416F0756E0112072A7583B4E56EF01C -:1004D000121A4D743F256EF582E43400F583E5333E -:1004E000F074BF256EF582E434001208B140D8E400 -:1004F000F570F546F547F56E1208FAF583E0FE1241 -:1005000008C6E07C002400FFEC3EFEAD3BD3EF9D2F -:10051000EE9C50047B0180027B00E57070047A0140 -:1005200080027A00EB5A6006856E46757001D3EF43 -:100530009DEE9C50047F0180027F00E570B40104B1 -:100540007E0180027E00EF5E6003856E47056EE5EA -:100550006E647F70A3E5466005E547B47E0385467B -:1005600047E56F7008854676854777800EC3747FB0 -:100570009546F578C3747F9547F579E56F7037E553 -:10058000466547700C757301757401F53CF53D8047 -:1005900035E4F54EC3E5479546F53CC313F57125A3 -:1005A00046F572C3943F4005E4F53D8040C3743F77 -:1005B0009572F53D8037E5466547700F7573017597 -:1005C0007501F53EF53F754E018022E4F54EC3E519 -:1005D000479546F53EC313F5712546F572D3943F12 -:1005E0005005E4F53F8006E57224C1F53F056FE54F -:1005F0006FC39402500302046EE56D456C70028077 -:1006000004E574457590072FF07F01E53E6004E531 -:100610003C7014E4F53CF53DF53EF53F1208D27010 -:1006200004F00206A4807AE53CC3953E4007E53C11 -:10063000953EFF8006C3E53E953CFFE576D3957970 -:10064000400585767A800385797AE577C395785079 -:100650000585777B800385787BE57BD3957A403071 -:10066000E57B957AF53CF53EC3E57B957A900719D5 -:10067000F0E53CC313F571257AF572C3943F40054C -:10068000E4F53D801FC3743F9572F53DF53F80143E -:10069000E4F53CF53E900719F01208D27003F080A3 -:1006A000037401F01208657583D0E0540FFEAD3C71 -:1006B00070027E07BE0F027E80EEFBEFD39B74803C -:1006C000F898401FE4F53CF53E1208D27003F08024 -:1006D000127401F0E508FBEB4407F5827583D2E064 -:1006E0004410F0E508FBEB4409F58275839EEDF0BC -:1006F000EB4407F5827583CAEDF01208657583CC6B -:10070000EFF022E5084407F5827583BCE054F0F071 -:10071000E5084407F5827583BEE054F0F0E508442F -:1007200007F5827583C0E054F0F0E5084407F582D0 -:1007300022F0900728E0FEA3E0F5828E8322854216 -:100740004285414185404074C02FF58274023EF5D8 -:1007500083E542F074E02FF58274023EF58322E5D2 -:100760004229FDE433FCE53CC39DEC6480F87480D1 -:100770009822F583E0900722541FFDE0FAA3E0F5EC -:10078000828A83EDF022900722E0FCA3E0F5828CC0 -:100790008322900724FFED4407CFF0A3EFF02285DA -:1007A0003838853939853A3A74C02FF58274023E5B -:1007B000F58322900726FFED4407CFF0A3EFF02248 -:1007C000F074A02FF58274023EF5832274C02511C7 -:1007D000F582E43401F5832274002511F582E434B6 -:1007E00002F5832274602511F582E43403F5832237 -:1007F00074802511F582E43403F5832274E0251119 -:10080000F582E43403F5832274402511F582E43443 -:1008100006F5832274802FF58274023EF58322AFA1 -:10082000087E00EF4407F58222F583E5824407F550 -:1008300082E540F02274402511F582E43402F5830C -:100840002274C02511F582E43403F5832274002557 -:1008500011F582E43406F5832274202511F582E433 -:100860003406F58322E508FDED4407F58222E541D3 -:10087000F0E56564014564227E00FB7A00FD7C00A2 -:100880002274202511F582E434022274A02511F58A -:1008900082E4340322853E42853F418F4022853CDD -:1008A00042853D418F402275453F900720E4F0A3EB -:1008B00022F583E532F0056EE56EC3944022F0E543 -:1008C000084406F582227400256EF582E43400F5B2 -:1008D0008322E56D456C90072F22E4F9E53CD39522 -:1008E0003E2274802EF582E43402F583E02274A067 -:1008F0002EF582E43402F583E0227480256EF582C1 -:10090000E43400222542FDE433FC22854242854145 -:100910004185404022ED4C60030209E5EF4E7037FF -:10092000900726120789E0FD1207CCEDF09007280A -:10093000120789E0FD1207D8EDF0120786E0541F78 -:10094000FD120881F583EDF0900724120789E05429 -:100950001FFD120835EDF0EF64044E703790072646 -:10096000120789E0FD1207E4EDF0900728120789CD -:10097000E0FD1207F0EDF0120786E0541FFD1208AB -:100980008BF583EDF0900724120789E0541FFD12C8 -:100990000841EDF0EF64014E70047D0180027D009E -:1009A000EF64024E70047F0180027F00EF4D60789B -:1009B000900726120735E0FF1207FCEF120731E01F -:1009C000FF120808EFF0900722120735E0541FFFCE -:1009D00012084DEFF0900724120735E0541FFF1264 -:1009E0000859EFF0221207CCE4F01207D8E4F01215 -:1009F0000881F583E4F01208357414F01207E4E47A -:100A0000F01207F0E4F012088BF583E4F0120841CD -:100A10007414F01207FCE4F0120808E4F012084D18 -:100A2000E4F01208597414F02253F9F775FC10E43D -:100A3000F5FD75FE30F5FFE5E720E70343F908E52E -:100A4000E620E70B78FFE4F6D8FD53E6FE80097850 -:100A500008E4F6D8FD53E6FE758180E4F5A8D2A837 -:100A6000C2A9D2AFE5E220E50520E602800343E11A -:100A700002E5E220E00E9000007F007E08E4F0A393 -:100A8000DFFCDEFA020ADB43FA01C0E0C0F0C083FB -:100A9000C082C0D0121CE7D0D0D082D083D0F0D09A -:100AA000E053FAFE32021B55E493A3F8E493A3F655 -:100AB00008DFF98029E493A3F85407240CC8C33352 -:100AC000C4540F4420C8834004F456800146F6DF26 -:100AD000E4800B010204081020408090003FE47E77 -:100AE000019360C1A3FF543F30E509541FFEE49316 -:100AF000A360010ECF54C025E060AD40B880FE8CED -:100B0000648D658A668B67E4F569EF4E7003021D9C -:100B100055E4F568E5674566703212072A758390DB -:100B2000E41207297583C2E41207297583C4E4120D -:100B30000870702912072A758392E41207297583B9 -:100B4000C6E41207297583C8E4F0801190072612C5 -:100B50000735E41208707005120732E4F0121D55D3 -:100B6000121EBFE5674566703312072A758390E54C -:100B7000411207297583C2E5411207297583C41202 -:100B8000086E702912072A758392E54012072975AD -:100B900083C6E5401207297583C8800E9007261288 -:100BA000073512086E7006120732E540F0AF697E15 -:100BB00000AD67AC6612044412072A7583CAE0D3FD -:100BC0009400500C0568E568C394055003020B14AB -:100BD000228C608D611208DA7420400D2FF582742A -:100BE000033EF583E53EF0800B2FF58274033EF55E -:100BF00083E53CF0E53CD3953E403CE561456070C3 -:100C000010E9120904E53E120768403B120895807E -:100C100018E53EC39538401D853E38E53E600585A4 -:100C20003F3980038539398F3A120814E53E12079F -:100C3000C0E53FF0228043E5614560701912075F0F -:100C4000400512089E802712090B120814E5421273 -:100C500007C0E541F022E53CC39538401D853C388E -:100C6000E53C6005853D3980038539398F3A1208A6 -:100C700014E53C1207C0E53DF02285383885393946 -:100C8000853A3A120814E5381207C0E539F0227F98 -:100C900006121731121D23120E04120E33E0440AFD -:100CA000F0748EFE120E04120E0BEFF0E52830E504 -:100CB00003D38001C3400575142080037514081206 -:100CC0000E0475838AE514F0B4FF05751280800662 -:100CD000E514C313F512E4F516F57F121936121355 -:100CE000A3E50AC3940150090516E516C394144000 -:100CF000EAE5E420E728120E047583D2E05408D315 -:100D0000940040047F0180027F00E50AC394014003 -:100D1000047E0180027E00EF5E6003121DD7E57F36 -:100D2000C394114014120E047583D2E04480F0E5A0 -:100D3000E420E70F121DD7800A120E047583D2E05B -:100D4000547FF0121D2322748A850882F583E517EB -:100D5000F0120E3AE4F0900702E0120E177583903D -:100D6000EFF07492FEE5084407FFF5828E83E054AD -:100D7000C0FD900703E0543F4D8F828E83F09007B3 -:100D800004E0120E17758382EFF0900705E0FFED87 -:100D90004407F5827583B4EF120E03758380E05427 -:100DA000BFF030370A120E91758394E04480F03022 -:100DB000380A120E91758392E04480F0E52830E401 -:100DC0001A20390A120E04758388E0547FF0203A05 -:100DD0000A120E04758388E054BFF0748CFE120E64 -:100DE000048E83E0540F120E03758386E054BFF027 -:100DF000E5084406120DFD75838AE4F022F582753C -:100E00008382E4F0E5084407F582228E83E0F51042 -:100E100054FEF0E5104401FFE508FDED4407F582BE -:100E200022E515C45407FFE508FDED4408F5827579 -:100E3000838222758380E04440F0E5084408F5820F -:100E400075838A22E51625E025E024AFF582E43497 -:100E50001AF583E493F50D2243E11043E18053E159 -:100E6000FD85E11022E51625E025E024B2F582E4B7 -:100E7000341AF583E49322855582855483E515F071 -:100E800022E5E25420D3940022E5E25440D39400BA -:100E900022E5084406F58222FDE508FBEB4407F550 -:100EA000822253F9F775FE3022EF4E70261207CCDE -:100EB000E0FD90072612077B1207D8E0FD90072877 -:100EC00012077B120881120772120835E09007247E -:100ED000120778EF64044E70291207E4E0FD9007D2 -:100EE0002612077B1207F0E0FD90072812077B12FD -:100EF000088B120772120841E0541FFD900724125C -:100F0000077BEF64014E70047D0180027D00EF6479 -:100F1000024E70047F0180027F00EF4D60351207A2 -:100F2000FCE0FF900726120789EFF0120808E0FFA7 -:100F3000900728120789EFF012084DE0541FFF12A6 -:100F40000786EFF0120859E0541FFF90072412079C -:100F500089EFF022E4F553120E8140047F018002F4 -:100F60007F00120E8940047E0180027E00EE4F70E9 -:100F700003020FF685E11043E10253E10F85E11012 -:100F8000E4F551E5E3543FF552120E89401DAD5290 -:100F9000AF51121118EF600885E11043E140800B5A -:100FA00053E1BF120E5812000680FBE5E3543FF5F3 -:100FB00051E5E4543FF552120E81401DAD52AF5140 -:100FC000121118EF600885E11043E120800B53E116 -:100FD000DF120E5812000680FB120E8140047F01C2 -:100FE00080027F00120E8940047E0180027E00EEA6 -:100FF0004F6003120E5B22120E21EFF012109122AD -:1010000002110002104002109000000000000000D9 -:1010100001200120E4F5571216BD121644E4121007 -:10102000561214B7900726120735E4120731E4F080 -:101030001210561214B7900726120735E541120711 -:1010400031E540F0AF577E00AD567C00120444AF4E -:10105000567E000211EEFF900720A3E0FDE4F55656 -:10106000F540FEFCAB56FA1211517F0F7D18E4F5E6 -:1010700056F540FEFCAB56FA121541AF567E0012F3 -:101080001AFFE4FFF5567D1FF540FEFCAB56FA2231 -:1010900022E4F555E508FD74A0F556ED4407F55733 -:1010A000E52830E503D38001C340057F28EF8004A5 -:1010B0007F14EFC313F554E4F9120E1875838EE014 -:1010C000F510CEEFCEEED394004026E51054FE127C -:1010D0000E9875838EEDF0E5104401FDEB4407F5A5 -:1010E00082EDF0855782855683E030E301091E804A -:1010F000D4C234E9C395544002D2342202000622FD -:10110000303011901000E493F510901010E493F536 -:101110001012109012115022E4FCC3ED9FFAEFF56B -:101120008375820079FFE493CC6CCCA3D9F8DAF60E -:10113000E5E230E4028CE5ED24FFFFEF7582FFF578 -:1011400083E4936C70037F01227F00222211000050 -:10115000228E588F598C5A8D5B8A5C8B5D755E012F -:10116000E4F55FF560F56212072A7583D0E0FFC4ED -:10117000540FF561121EA585595ED3E55E955BE5BA -:101180005A12076B504B1207037583BCE0455E1281 -:1011900007297583BEE0455E1207297583C0E045C7 -:1011A0005EF0AF5FE560120878120AFFAF627E0062 -:1011B000AD5DAC5C120444E561AF5E7E00B4030536 -:1011C000121E218007AD5DAC5C121317055E021183 -:1011D0007A1207037583BCE045401207297583BE68 -:1011E000E045401207297583C0E04540F0228E5843 -:1011F0008F59755A017901755B01E4FB12072A7555 -:1012000083AEE0541AFF120865E0C4135407FEEFE2 -:10121000700CEE6535700790072FE0B4010DAF3507 -:101220007E00120EA9CFEBCF021E60E55964024585 -:101230005870047F0180027F00E559455870047E94 -:101240000180027E00EE4F602385414985404BE5D9 -:10125000594558702CAF5AFECDE9CDFCAB59AA5870 -:10126000120AFFAF5B7E00121E608015AF5B7E002E -:10127000121E60900726120735E549120731E54B2B -:10128000F0E4FDAF35FEFC120915228C648D651269 -:1012900008DA403CE56545647010120904C3E53E78 -:1012A000120769403B1208958018E53EC395384007 -:1012B0001D853E38E53E6005853F39800385393917 -:1012C0008F3A1207A8E53E120753E53FF022803B14 -:1012D000E5654564701112075F400512089E801F86 -:1012E00012073EE541F022E53CC39538401D853CA0 -:1012F00038E53C6005853D3980038539398F3A12E0 -:1013000007A8E53C120753E53DF02212079FE53898 -:10131000120753E539F0228C638D641208DA403CE1 -:10132000E56445637010120904C3E53E1207694085 -:101330003B1208958018E53EC39538401D853E3820 -:10134000E53E6005853F3980038539398F3A1207BC -:10135000A8E53E120753E53FF022803BE564456374 -:10136000701112075F400512089E801F12073EE5AC -:1013700041F022E53CC39538401D853C38E53C6092 -:1013800005853D3980038539398F3A1207A8E53C38 -:10139000120753E53DF02212079FE538120753E587 -:1013A00039F022E50DFEE5088E544405F555751516 -:1013B0000FF582120E7A1217A320310575150380DE -:1013C0000375150BE50AC39401503812142020311F -:1013D0000605150515800415151515E50AC39401B4 -:1013E0005021121420203104051580021515E50A3C -:1013F000C39401500E120E771217A3203105051564 -:10140000120E77E515B408047F0180027F00E51510 -:10141000B407047E0180027E00EE4F6002057F2249 -:10142000855582855483E515F01217A32212072AE9 -:101430007583AE74FF120729E0541AF534E0C41323 -:101440005407F53524FE602424FE603C24047063B8 -:1014500075312DE508FD74B612079274BC90072211 -:1014600012079574901207B37492803C75313AE577 -:1014700008FD74BA12079274C09007221207B6745E -:10148000C41207B374C88020753135E508FD74B8FF -:1014900012079274BEFFED4407900722CFF0A3EF2E -:1014A000F074C21207B374C6FFED4407A3CFF0A3D4 -:1014B000EFF022753401228E588F598C5A8D5B8A39 -:1014C0005C8B5D755E01E4F55F121EA585595ED3E8 -:1014D000E55E955BE55A12076B5057E55D455C701C -:1014E0003012072A758392E55E1207297583C6E5D7 -:1014F0005E1207297583C8E55E120729758390E59A -:101500005E1207297583C2E55E1207297583C480C0 -:1015100003120732E55EF0AF5F7E00AD5DAC5C129A -:101520000444AF5E7E00AD5DAC5C120BD1055E0283 -:1015300014CFAB5DAA5CAD5BAC5AAF59AE58021B81 -:10154000FB8C5C8D5D8A5E8B5F756001E4F561F5F7 -:1015500062F563121EA58F60D3E560955DE55C12B0 -:10156000076B5061E55F455E702712072A7583B6E9 -:10157000E5601207297583B8E5601207297583BAFB -:10158000E560F0AF617E00E56212087A120AFF8022 -:1015900019900724120735E56012072975838EE438 -:1015A0001207297401120729E4F0AF637E00AD5FD2 -:1015B000AC5E120444AF607E00AD5FAC5E12128B75 -:1015C00005600215582290114DE49390072EF012F9 -:1015D000081F7583AEE0541AF5347067EF4407F5C1 -:1015E000827583CEE0FF1313135407F536540FD3DF -:1015F0009400400612142D121BA9E536540F24FE48 -:10160000600C14600C146019240370378010021EE3 -:1016100091121E9112072A7583CEE054EFF0021D3D -:10162000AE121014E4F555121D850555E555C39409 -:101630000540F412072A7583CEE054C7120729E04B -:101640004408F022E4F558F559AF08EF4407F58255 -:101650007583D0E0FDC4540FF55AEF4407F5827549 -:1016600083807401F0120821758382E545F0EF4410 -:1016700007F58275838A74FFF0121A4D12072A75D6 -:1016800083BCE054EF1207297583BEE054EF1207C4 -:10169000297583C0E054EF1207297583BCE044101C -:1016A0001207297583BEE044101207297583C0E034 -:1016B0004410F0AF58E559120878020AFFE4F558D3 -:1016C0007D01F559AF35FEFC12091512072A758305 -:1016D000B674101207297583B87410120729758320 -:1016E000BA74101207297583BC7410120729758308 -:1016F000BE74101207297583C074101207297583F0 -:1017000090E41207297583C2E41207297583C4E4A3 -:10171000120729758392E41207297583C6E412071C -:10172000297583C8E4F0AF58FEE55912087A020A19 -:10173000FFE5E230E46CE5E754C064407064E5091D -:10174000C45430FEE50825E025E054C04EFEEF54B9 -:101750003F4EFDE52BAE2A7802C333CE33CED8F907 -:10176000F5828E83EDF0E52BAE2A7802C333CE33BB -:10177000CED8F9FFF5828E83A3E5FEF08F828E83AB -:10178000A3A3E5FDF08F828E83A3A3A3E5FCF0C3A2 -:10179000E52B94FAE52A94005008052BE52B7002FE -:1017A000052A22E4FFE4F558F556F5577482FC1239 -:1017B0000E048C83E0F510547FF0E5104480120E87 -:1017C00098EDF07E0A120E047583A0E020E026DE7C -:1017D000F40557E55770020556E5142401FDE4337E -:1017E000FCD3E5579DE5569C40D9E50A942050026C -:1017F000050A43E108C231120E047583A6E05512B2 -:1018000065127003D23122C23122900726E0FAA37A -:10181000E0F5828A83E0F541E539C395414026E54C -:10182000399541C39FEE12076B40047C0180027C16 -:1018300000E541643F60047B0180027B00EC5B605B -:101840002905418028C3E5419539C39FEE12076BF6 -:1018500040047F0180027F00E54160047E01800238 -:101860007E00EF5E600415418003853941853A4072 -:1018700022E5E230E460E5E130E25BE50970047FF7 -:101880000180027F00E50870047E0180027E00EE88 -:101890005F604353F9F8E5E230E43BE5E130E22EE6 -:1018A00043FA0253FAFBE4F510909470E510F0E56A -:1018B000E130E2E7909470E06510600343FA0405BC -:1018C00010909470E510F070E612000680E153FA73 -:1018D000FD53FAFB80C0228F54120006E5E130E090 -:1018E000047F0180027F00E57ED3940540047E01E1 -:1018F00080027E00EE4F603D855411E5E220E1322A -:1019000074CE121A0530E7047D0180027D008F82BB -:101910008E83E030E6047F0180027F00EF5D70156A -:101920001215C674CE121A0530E607E04480F04363 -:10193000F98012187122120E44E51625E025E024E4 -:10194000B0F582E4341AF583E493F50FE51625E04B -:1019500025E024B1F582E4341AF583E493F50E1200 -:101960000E65F510E50F54F0120E1775838CEFF02D -:10197000E50F30E00C120E04758386E04440F080E1 -:101980000A120E04758386E054BFF0120E9175831F -:1019900082E50EF0227F05121731120E04120E336B -:1019A0007402F0748EFE120E04120E0BEFF0751519 -:1019B00070120FF72034057515108003751550123D -:1019C0000FF72034047410800274F02515F51512F9 -:1019D0000E21EFF0121091203417E5156430600CE1 -:1019E00074102515F515B48003E4F515120E21EFDA -:1019F000F022F0E50B25E025E02482F582E43407AF -:101A0000F583227488FEE5084407FFF5828E83E0A3 -:101A100022F0E5084407F58222F0E054C08F828E60 -:101A200083F022EF4407F582758386E05410D39447 -:101A30000022F0900715E004F0224406F582758339 -:101A40009EE022FEEF4407F5828E83E022E49007B9 -:101A50002AF0A3F012072A758382E0547F12072927 -:101A6000E04480F01210FC12081F7583A0E020E013 -:101A70001A90072BE004F0700690072AE004F0901B -:101A8000072AE0B410E1A3E0B400DCEE44A6FCEFCA -:101A90004407F5828C83E0F532EE44A8FEEF44075C -:101AA000F5828E83E0F5332201201100042000909E -:101AB00000200F9200210F9400220F9600230F9810 -:101AC00000240F9A00250F9C00260F9E00270FA0D0 -:101AD000012001A2012101A4012201A6012301A8E4 -:101AE000012401AA012501AC012601AE012701B0A4 -:101AF000012801B400280FB640280FB8612801CB97 -:101B0000EFCBCAEECA7F01E4FDEB4A7024E508F58D -:101B10008274B6120829E508F58274B8120829E51E -:101B200008F58274BA1208297E007C00120AFF8030 -:101B300012900726120735E541F090072412073569 -:101B4000E540F012072A75838EE41207297401120A -:101B50000729E4F022E4F526F52753E1FEF52A757E -:101B60002B01F5087F0112173130301C901AA9E4BF -:101B700093F510901FF9E493F510900041E493F56C -:101B800010901ECAE493F5107F02121731120F5401 -:101B90007F03121731120006E5E230E70912100048 -:101BA00030300312110002004712081F7583D0E085 -:101BB000C4540FFD7543017544FF1208AA7404F064 -:101BC000753B01ED14600C14600B14600F2403705E -:101BD0000B800980001208A704F080061208A77481 -:101BE00004F0EE4482FEEF4407F5828E83E5451251 -:101BF00008BE758382E531F002114C8E608F611250 -:101C00001EA5E4FFCEEDCEEED39561E56012076B25 -:101C1000403974202EF582E43403F583E07003FF2D -:101C200080261208E2FDC39F401ECFEDCFEB4A7025 -:101C30000B8D421208EEF5418E40800C1208E2F541 -:101C4000381208EEF5398E3A1E80BC22755801E52F -:101C500035700C1207CCE0F54A1207D8E0F54CE5D8 -:101C600035B4040C1207E4E0F54A1207F0E0F54C35 -:101C7000E535B401047F0180027F00E535B402043C -:101C80007E0180027E00EE4F600C1207FCE0F54AF8 -:101C9000120808E0F54C85414985404B22755B01EF -:101CA000900724120735E0541FFFD3940250048F8D -:101CB000588005EF24FEF558EFC394184005755978 -:101CC000188004EF04F55985435AAF587E00AD598A -:101CD0007C00AB5B7A00121541AF5A7E0012180AE5 -:101CE000AF5B7E00021AFFE5E230E70E121003C27E -:101CF000303030031210FF203328E5E730E70512BB -:101D00000EA2800DE5FEC394205006120EA243F9E8 -:101D100008E5F230E70353F97FE5F15470D39400FE -:101D200050D822120E04758380E4F0E508440712AF -:101D30000DFD758384120E02758386120E02758363 -:101D40008CE054F3120E0375838E120E0275839489 -:101D5000E054FBF02212072A75838EE412072974DF -:101D600001120729E41208BE75838CE04420120892 -:101D7000BEE054DFF07484850882F583E0547FF080 -:101D8000E04480F022755601E4FDF557AF35FEFCC6 -:101D9000120915121C9D121E7A121C4CAF577E00A0 -:101DA000AD567C00120444AF567E000211EE75560B -:101DB00001E4FDF557AF35FEFC120915121C9D120A -:101DC0001E7A121C4CAF577E00AD567C00120444A4 -:101DD000AF567E000211EEE4F516120E44FEE50841 -:101DE0004405FF120E658F828E83F00516E516C33B -:101DF000941440E6E508120E2BE4F022E4F558F5C1 -:101E000059F55AFFFEAD58FC1209157F047E00AD4E -:101E1000587C001209157F027E00AD587C00020933 -:101E200015E53C253EFCE5422400FBE433FAECC317 -:101E30009BEA12076B400B8C42E53D253FF5418F35 -:101E4000402212090B227484F5188508198519821D -:101E5000851883E0547FF0E04480F0E04480F02275 -:101E6000EF4E700B12072A7583D2E054DFF0221276 -:101E7000072A7583D2E04420F02275580190072686 -:101E8000120735E0543FF541120732E0543FF54068 -:101E900022755602E4F557121DFCAF577E00AD5671 -:101EA0007C00020444E4F542F541F540F538F5398B -:101EB000F53A22EF5407FFE5F954F84FF5F9227F80 -:101EC00001E4FE0F0EBEFFFB2201200001042000F2 -:101ED0000000000000000000000000000000000002 -:101EE00000000000000000000000000000000000F2 -:101EF00000000000000000000000000000000000E2 -:101F000000000000000000000000000000000000D1 -:101F100000000000000000000000000000000000C1 -:101F200000000000000000000000000000000000B1 -:101F300000000000000000000000000000000000A1 -:101F40000000000000000000000000000000000091 -:101F50000000000000000000000000000000000081 -:101F60000000000000000000000000000000000071 -:101F70000000000000000000000000000000000061 -:101F80000000000000000000000000000000000051 -:101F90000000000000000000000000000000000041 -:101FA0000000000000000000000000000000000031 -:101FB0000000000000000000000000000000000021 -:101FC0000000000000000000000000000000000011 -:101FD0000000000000000000000000000000000001 -:101FE00000000000000000000000000000000000F1 -:101FF000000000000000000001201100042000810A -:00000001FF diff --git a/firmware/qlogic/sd7220.fw.ihex b/firmware/qlogic/sd7220.fw.ihex new file mode 100644 index 000000000000..a33636319112 --- /dev/null +++ b/firmware/qlogic/sd7220.fw.ihex @@ -0,0 +1,513 @@ +:10000000020A29020A87E5E630E6047F0180027FC2 +:1000100000E5E230E4047E0180027E00EE5F6008CD +:1000200053F9F7E4F5FE80087F0A121731120EA289 +:1000300075FC08E4F5FDE5E720E70343F908220035 +:1000400001201100042000755101E4F552F553F52B +:1000500052F57E7F04020438C2360552E552D3942D +:100060000C4005755201D23690070C7407F0A3744A +:10007000FFF0E4F50CA3F0900714F0A3F0750B204B +:10008000F509E4F508E508D39430400302040412AE +:100090000006150BE50870047F0180027F00E5096A +:1000A00070047E0180027E00EE5F6005121871D23E +:1000B0003553E1F7E5084509FFE50B25E025E02488 +:1000C00083F582E43407F583EFF085E220E552D32F +:1000D0009401400D1219F3E054A064407003020330 +:1000E000FB53F9F8909470E4F0E0F510AF09121E9C +:1000F000B3AF08EF4408F582758380E0F529EF443B +:1001000007121A3CF5225440D39400401EE52954AE +:10011000F070211219F3E04480F0E52254306508B4 +:1001200070091219F3E054BFF080091219F37440FA +:10013000F00203FB121A127583AE74FFF0AF087E53 +:1001400000EF4407F582E0FDE50B25E025E0248182 +:10015000F582E43407F583EDF090070EE004F0EF4C +:100160004407F582758398E0F528121A23400C1293 +:1001700019F3E04401121A320203F6AF087E00744C +:1001800080CDEFCD8D82F583E030E00A1219F3E0E7 +:100190004420F00203FB1219F3E054DFF0EE44AE0A +:1001A000121A4330E4030203FB749E121A0520E086 +:1001B000030203FB8F828E83E020E0030203FB1225 +:1001C00019F3E04410F0E5E320E708E508121A3AD5 +:1001D0004404F0AF087E00EF121A3A20E2341219FC +:1001E000F3E04408F0E5E430E6047D0180027D00A0 +:1001F000E57EC3940450047C0180027C00EC4D60D9 +:1002000005C2350203FBEE44D2121A434440F00209 +:1002100003FB1219F3E054F7F0121A127583D2E0BF +:1002200054BFF0900714E004F0E57E7003757E0182 +:10023000AF087E00121A2340121219F3E044011293 +:1002400019F2E05402121A320203FB1219F3E044CD +:10025000021219F2E054FEF0C235EE448A8F82F5A4 +:1002600083E0F517548F4440F07490FCE508440790 +:10027000FDF5828C83E0543F900702F0E054C08D7E +:10028000828C83F07492121A05900703121A197463 +:1002900082121A05900704121A1974B4121A0590E2 +:1002A0000705121A197494FEE5084406121A0AF595 +:1002B0001030E004D2378002C237E510547F8F82BD +:1002C0008E83F0304430121A035480D394004004DB +:1002D000D2398002C2398F828E83E04480F0121AB4 +:1002E000035440D394004004D23A8002C23A8F8231 +:1002F0008E83E04440F07492FEE5084406121A0A28 +:1003000030E704D2388002C2388F828E83E0547F77 +:10031000F0121E46E4F50A20030280033043031264 +:1003200019952002028003304203120C8F303006F0 +:10033000121995120C8F120D471219F3E054FBF0AD +:10034000E50AC39401404643E1081219F3E044046E +:10035000F0E5E420E72A121A127583D2E05408D39C +:10036000940040047F0180027F00E50AC3940140AD +:10037000047E0180027E00EF5E6005121DD78017AB +:10038000121A127583D2E04408F00203FB121A120B +:100390007583D2E054F7F0121E467F0812173174AD +:1003A0008EFE121A128E83E0F51054FEF0E5104412 +:1003B00001FFE508FDED4407F582EFF0E51054FE7E +:1003C000FFED4407F582EF121A11758386E04410A1 +:1003D000121A11E04410F01219F3E054FD4401FF29 +:1003E0001219F3EF121A3230320CE5084408F58284 +:1003F0007583827405F0AF0B1218D774102508F5B9 +:10040000080200850509E509D3940750030200821C +:10041000E57ED3940040047F0180027F00E57EC327 +:1004200094FA50047E0180027E00EE5F6002057E39 +:1004300030350B43E1017F0912173102005853E1B7 +:10044000FE0200588E6A8F6B8C6C8D6D756E017517 +:100450006F01757001E4F573F574F57590072FF071 +:10046000F53CF53EF546F547F53DF53FF56FE56F93 +:10047000700FE56B456A12072A758380743AF08025 +:100480000912072A758380741AF0E4F56EC3743F6D +:10049000956EFF120865758382EFF0121A4D1208EF +:1004A000C6E533F01208FA1208B140E1E56F700BAF +:1004B00012072A7583807436F0800912072A758323 +:1004C000807416F0756E0112072A7583B4E56EF01C +:1004D000121A4D743F256EF582E43400F583E5333E +:1004E000F074BF256EF582E434001208B140D8E400 +:1004F000F570F546F547F56E1208FAF583E0FE1241 +:1005000008C6E07C002400FFEC3EFEAD3BD3EF9D2F +:10051000EE9C50047B0180027B00E57070047A0140 +:1005200080027A00EB5A6006856E46757001D3EF43 +:100530009DEE9C50047F0180027F00E570B40104B1 +:100540007E0180027E00EF5E6003856E47056EE5EA +:100550006E647F70A3E5466005E547B47E0385467B +:1005600047E56F7008854676854777800EC3747FB0 +:100570009546F578C3747F9547F579E56F7037E553 +:10058000466547700C757301757401F53CF53D8047 +:1005900035E4F54EC3E5479546F53CC313F57125A3 +:1005A00046F572C3943F4005E4F53D8040C3743F77 +:1005B0009572F53D8037E5466547700F7573017597 +:1005C0007501F53EF53F754E018022E4F54EC3E519 +:1005D000479546F53EC313F5712546F572D3943F12 +:1005E0005005E4F53F8006E57224C1F53F056FE54F +:1005F0006FC39402500302046EE56D456C70028077 +:1006000004E574457590072FF07F01E53E6004E531 +:100610003C7014E4F53CF53DF53EF53F1208D27010 +:1006200004F00206A4807AE53CC3953E4007E53C11 +:10063000953EFF8006C3E53E953CFFE576D3957970 +:10064000400585767A800385797AE577C395785079 +:100650000585777B800385787BE57BD3957A403071 +:10066000E57B957AF53CF53EC3E57B957A900719D5 +:10067000F0E53CC313F571257AF572C3943F40054C +:10068000E4F53D801FC3743F9572F53DF53F80143E +:10069000E4F53CF53E900719F01208D27003F080A3 +:1006A000037401F01208657583D0E0540FFEAD3C71 +:1006B00070027E07BE0F027E80EEFBEFD39B74803C +:1006C000F898401FE4F53CF53E1208D27003F08024 +:1006D000127401F0E508FBEB4407F5827583D2E064 +:1006E0004410F0E508FBEB4409F58275839EEDF0BC +:1006F000EB4407F5827583CAEDF01208657583CC6B +:10070000EFF022E5084407F5827583BCE054F0F071 +:10071000E5084407F5827583BEE054F0F0E508442F +:1007200007F5827583C0E054F0F0E5084407F582D0 +:1007300022F0900728E0FEA3E0F5828E8322854216 +:100740004285414185404074C02FF58274023EF5D8 +:1007500083E542F074E02FF58274023EF58322E5D2 +:100760004229FDE433FCE53CC39DEC6480F87480D1 +:100770009822F583E0900722541FFDE0FAA3E0F5EC +:10078000828A83EDF022900722E0FCA3E0F5828CC0 +:100790008322900724FFED4407CFF0A3EFF02285DA +:1007A0003838853939853A3A74C02FF58274023E5B +:1007B000F58322900726FFED4407CFF0A3EFF02248 +:1007C000F074A02FF58274023EF5832274C02511C7 +:1007D000F582E43401F5832274002511F582E434B6 +:1007E00002F5832274602511F582E43403F5832237 +:1007F00074802511F582E43403F5832274E0251119 +:10080000F582E43403F5832274402511F582E43443 +:1008100006F5832274802FF58274023EF58322AFA1 +:10082000087E00EF4407F58222F583E5824407F550 +:1008300082E540F02274402511F582E43402F5830C +:100840002274C02511F582E43403F5832274002557 +:1008500011F582E43406F5832274202511F582E433 +:100860003406F58322E508FDED4407F58222E541D3 +:10087000F0E56564014564227E00FB7A00FD7C00A2 +:100880002274202511F582E434022274A02511F58A +:1008900082E4340322853E42853F418F4022853CDD +:1008A00042853D418F402275453F900720E4F0A3EB +:1008B00022F583E532F0056EE56EC3944022F0E543 +:1008C000084406F582227400256EF582E43400F5B2 +:1008D0008322E56D456C90072F22E4F9E53CD39522 +:1008E0003E2274802EF582E43402F583E02274A067 +:1008F0002EF582E43402F583E0227480256EF582C1 +:10090000E43400222542FDE433FC22854242854145 +:100910004185404022ED4C60030209E5EF4E7037FF +:10092000900726120789E0FD1207CCEDF09007280A +:10093000120789E0FD1207D8EDF0120786E0541F78 +:10094000FD120881F583EDF0900724120789E05429 +:100950001FFD120835EDF0EF64044E703790072646 +:10096000120789E0FD1207E4EDF0900728120789CD +:10097000E0FD1207F0EDF0120786E0541FFD1208AB +:100980008BF583EDF0900724120789E0541FFD12C8 +:100990000841EDF0EF64014E70047D0180027D009E +:1009A000EF64024E70047F0180027F00EF4D60789B +:1009B000900726120735E0FF1207FCEF120731E01F +:1009C000FF120808EFF0900722120735E0541FFFCE +:1009D00012084DEFF0900724120735E0541FFF1264 +:1009E0000859EFF0221207CCE4F01207D8E4F01215 +:1009F0000881F583E4F01208357414F01207E4E47A +:100A0000F01207F0E4F012088BF583E4F0120841CD +:100A10007414F01207FCE4F0120808E4F012084D18 +:100A2000E4F01208597414F02253F9F775FC10E43D +:100A3000F5FD75FE30F5FFE5E720E70343F908E52E +:100A4000E620E70B78FFE4F6D8FD53E6FE80097850 +:100A500008E4F6D8FD53E6FE758180E4F5A8D2A837 +:100A6000C2A9D2AFE5E220E50520E602800343E11A +:100A700002E5E220E00E9000007F007E08E4F0A393 +:100A8000DFFCDEFA020ADB43FA01C0E0C0F0C083FB +:100A9000C082C0D0121CE7D0D0D082D083D0F0D09A +:100AA000E053FAFE32021B55E493A3F8E493A3F655 +:100AB00008DFF98029E493A3F85407240CC8C33352 +:100AC000C4540F4420C8834004F456800146F6DF26 +:100AD000E4800B010204081020408090003FE47E77 +:100AE000019360C1A3FF543F30E509541FFEE49316 +:100AF000A360010ECF54C025E060AD40B880FE8CED +:100B0000648D658A668B67E4F569EF4E7003021D9C +:100B100055E4F568E5674566703212072A758390DB +:100B2000E41207297583C2E41207297583C4E4120D +:100B30000870702912072A758392E41207297583B9 +:100B4000C6E41207297583C8E4F0801190072612C5 +:100B50000735E41208707005120732E4F0121D55D3 +:100B6000121EBFE5674566703312072A758390E54C +:100B7000411207297583C2E5411207297583C41202 +:100B8000086E702912072A758392E54012072975AD +:100B900083C6E5401207297583C8800E9007261288 +:100BA000073512086E7006120732E540F0AF697E15 +:100BB00000AD67AC6612044412072A7583CAE0D3FD +:100BC0009400500C0568E568C394055003020B14AB +:100BD000228C608D611208DA7420400D2FF582742A +:100BE000033EF583E53EF0800B2FF58274033EF55E +:100BF00083E53CF0E53CD3953E403CE561456070C3 +:100C000010E9120904E53E120768403B120895807E +:100C100018E53EC39538401D853E38E53E600585A4 +:100C20003F3980038539398F3A120814E53E12079F +:100C3000C0E53FF0228043E5614560701912075F0F +:100C4000400512089E802712090B120814E5421273 +:100C500007C0E541F022E53CC39538401D853C388E +:100C6000E53C6005853D3980038539398F3A1208A6 +:100C700014E53C1207C0E53DF02285383885393946 +:100C8000853A3A120814E5381207C0E539F0227F98 +:100C900006121731121D23120E04120E33E0440AFD +:100CA000F0748EFE120E04120E0BEFF0E52830E504 +:100CB00003D38001C3400575142080037514081206 +:100CC0000E0475838AE514F0B4FF05751280800662 +:100CD000E514C313F512E4F516F57F121936121355 +:100CE000A3E50AC3940150090516E516C394144000 +:100CF000EAE5E420E728120E047583D2E05408D315 +:100D0000940040047F0180027F00E50AC394014003 +:100D1000047E0180027E00EF5E6003121DD7E57F36 +:100D2000C394114014120E047583D2E04480F0E5A0 +:100D3000E420E70F121DD7800A120E047583D2E05B +:100D4000547FF0121D2322748A850882F583E517EB +:100D5000F0120E3AE4F0900702E0120E177583903D +:100D6000EFF07492FEE5084407FFF5828E83E054AD +:100D7000C0FD900703E0543F4D8F828E83F09007B3 +:100D800004E0120E17758382EFF0900705E0FFED87 +:100D90004407F5827583B4EF120E03758380E05427 +:100DA000BFF030370A120E91758394E04480F03022 +:100DB000380A120E91758392E04480F0E52830E401 +:100DC0001A20390A120E04758388E0547FF0203A05 +:100DD0000A120E04758388E054BFF0748CFE120E64 +:100DE000048E83E0540F120E03758386E054BFF027 +:100DF000E5084406120DFD75838AE4F022F582753C +:100E00008382E4F0E5084407F582228E83E0F51042 +:100E100054FEF0E5104401FFE508FDED4407F582BE +:100E200022E515C45407FFE508FDED4408F5827579 +:100E3000838222758380E04440F0E5084408F5820F +:100E400075838A22E51625E025E024AFF582E43497 +:100E50001AF583E493F50D2243E11043E18053E159 +:100E6000FD85E11022E51625E025E024B2F582E4B7 +:100E7000341AF583E49322855582855483E515F071 +:100E800022E5E25420D3940022E5E25440D39400BA +:100E900022E5084406F58222FDE508FBEB4407F550 +:100EA000822253F9F775FE3022EF4E70261207CCDE +:100EB000E0FD90072612077B1207D8E0FD90072877 +:100EC00012077B120881120772120835E09007247E +:100ED000120778EF64044E70291207E4E0FD9007D2 +:100EE0002612077B1207F0E0FD90072812077B12FD +:100EF000088B120772120841E0541FFD900724125C +:100F0000077BEF64014E70047D0180027D00EF6479 +:100F1000024E70047F0180027F00EF4D60351207A2 +:100F2000FCE0FF900726120789EFF0120808E0FFA7 +:100F3000900728120789EFF012084DE0541FFF12A6 +:100F40000786EFF0120859E0541FFF90072412079C +:100F500089EFF022E4F553120E8140047F018002F4 +:100F60007F00120E8940047E0180027E00EE4F70E9 +:100F700003020FF685E11043E10253E10F85E11012 +:100F8000E4F551E5E3543FF552120E89401DAD5290 +:100F9000AF51121118EF600885E11043E140800B5A +:100FA00053E1BF120E5812000680FBE5E3543FF5F3 +:100FB00051E5E4543FF552120E81401DAD52AF5140 +:100FC000121118EF600885E11043E120800B53E116 +:100FD000DF120E5812000680FB120E8140047F01C2 +:100FE00080027F00120E8940047E0180027E00EEA6 +:100FF0004F6003120E5B22120E21EFF012109122AD +:1010000002110002104002109000000000000000D9 +:1010100001200120E4F5571216BD121644E4121007 +:10102000561214B7900726120735E4120731E4F080 +:101030001210561214B7900726120735E541120711 +:1010400031E540F0AF577E00AD567C00120444AF4E +:10105000567E000211EEFF900720A3E0FDE4F55656 +:10106000F540FEFCAB56FA1211517F0F7D18E4F5E6 +:1010700056F540FEFCAB56FA121541AF567E0012F3 +:101080001AFFE4FFF5567D1FF540FEFCAB56FA2231 +:1010900022E4F555E508FD74A0F556ED4407F55733 +:1010A000E52830E503D38001C340057F28EF8004A5 +:1010B0007F14EFC313F554E4F9120E1875838EE014 +:1010C000F510CEEFCEEED394004026E51054FE127C +:1010D0000E9875838EEDF0E5104401FDEB4407F5A5 +:1010E00082EDF0855782855683E030E301091E804A +:1010F000D4C234E9C395544002D2342202000622FD +:10110000303011901000E493F510901010E493F536 +:101110001012109012115022E4FCC3ED9FFAEFF56B +:101120008375820079FFE493CC6CCCA3D9F8DAF60E +:10113000E5E230E4028CE5ED24FFFFEF7582FFF578 +:1011400083E4936C70037F01227F00222211000050 +:10115000228E588F598C5A8D5B8A5C8B5D755E012F +:10116000E4F55FF560F56212072A7583D0E0FFC4ED +:10117000540FF561121EA585595ED3E55E955BE5BA +:101180005A12076B504B1207037583BCE0455E1281 +:1011900007297583BEE0455E1207297583C0E045C7 +:1011A0005EF0AF5FE560120878120AFFAF627E0062 +:1011B000AD5DAC5C120444E561AF5E7E00B4030536 +:1011C000121E218007AD5DAC5C121317055E021183 +:1011D0007A1207037583BCE045401207297583BE68 +:1011E000E045401207297583C0E04540F0228E5843 +:1011F0008F59755A017901755B01E4FB12072A7555 +:1012000083AEE0541AFF120865E0C4135407FEEFE2 +:10121000700CEE6535700790072FE0B4010DAF3507 +:101220007E00120EA9CFEBCF021E60E55964024585 +:101230005870047F0180027F00E559455870047E94 +:101240000180027E00EE4F602385414985404BE5D9 +:10125000594558702CAF5AFECDE9CDFCAB59AA5870 +:10126000120AFFAF5B7E00121E608015AF5B7E002E +:10127000121E60900726120735E549120731E54B2B +:10128000F0E4FDAF35FEFC120915228C648D651269 +:1012900008DA403CE56545647010120904C3E53E78 +:1012A000120769403B1208958018E53EC395384007 +:1012B0001D853E38E53E6005853F39800385393917 +:1012C0008F3A1207A8E53E120753E53FF022803B14 +:1012D000E5654564701112075F400512089E801F86 +:1012E00012073EE541F022E53CC39538401D853CA0 +:1012F00038E53C6005853D3980038539398F3A12E0 +:1013000007A8E53C120753E53DF02212079FE53898 +:10131000120753E539F0228C638D641208DA403CE1 +:10132000E56445637010120904C3E53E1207694085 +:101330003B1208958018E53EC39538401D853E3820 +:10134000E53E6005853F3980038539398F3A1207BC +:10135000A8E53E120753E53FF022803BE564456374 +:10136000701112075F400512089E801F12073EE5AC +:1013700041F022E53CC39538401D853C38E53C6092 +:1013800005853D3980038539398F3A1207A8E53C38 +:10139000120753E53DF02212079FE538120753E587 +:1013A00039F022E50DFEE5088E544405F555751516 +:1013B0000FF582120E7A1217A320310575150380DE +:1013C0000375150BE50AC39401503812142020311F +:1013D0000605150515800415151515E50AC39401B4 +:1013E0005021121420203104051580021515E50A3C +:1013F000C39401500E120E771217A3203105051564 +:10140000120E77E515B408047F0180027F00E51510 +:10141000B407047E0180027E00EE4F6002057F2249 +:10142000855582855483E515F01217A32212072AE9 +:101430007583AE74FF120729E0541AF534E0C41323 +:101440005407F53524FE602424FE603C24047063B8 +:1014500075312DE508FD74B612079274BC90072211 +:1014600012079574901207B37492803C75313AE577 +:1014700008FD74BA12079274C09007221207B6745E +:10148000C41207B374C88020753135E508FD74B8FF +:1014900012079274BEFFED4407900722CFF0A3EF2E +:1014A000F074C21207B374C6FFED4407A3CFF0A3D4 +:1014B000EFF022753401228E588F598C5A8D5B8A39 +:1014C0005C8B5D755E01E4F55F121EA585595ED3E8 +:1014D000E55E955BE55A12076B5057E55D455C701C +:1014E0003012072A758392E55E1207297583C6E5D7 +:1014F0005E1207297583C8E55E120729758390E59A +:101500005E1207297583C2E55E1207297583C480C0 +:1015100003120732E55EF0AF5F7E00AD5DAC5C129A +:101520000444AF5E7E00AD5DAC5C120BD1055E0283 +:1015300014CFAB5DAA5CAD5BAC5AAF59AE58021B81 +:10154000FB8C5C8D5D8A5E8B5F756001E4F561F5F7 +:1015500062F563121EA58F60D3E560955DE55C12B0 +:10156000076B5061E55F455E702712072A7583B6E9 +:10157000E5601207297583B8E5601207297583BAFB +:10158000E560F0AF617E00E56212087A120AFF8022 +:1015900019900724120735E56012072975838EE438 +:1015A0001207297401120729E4F0AF637E00AD5FD2 +:1015B000AC5E120444AF607E00AD5FAC5E12128B75 +:1015C00005600215582290114DE49390072EF012F9 +:1015D000081F7583AEE0541AF5347067EF4407F5C1 +:1015E000827583CEE0FF1313135407F536540FD3DF +:1015F0009400400612142D121BA9E536540F24FE48 +:10160000600C14600C146019240370378010021EE3 +:1016100091121E9112072A7583CEE054EFF0021D3D +:10162000AE121014E4F555121D850555E555C39409 +:101630000540F412072A7583CEE054C7120729E04B +:101640004408F022E4F558F559AF08EF4407F58255 +:101650007583D0E0FDC4540FF55AEF4407F5827549 +:1016600083807401F0120821758382E545F0EF4410 +:1016700007F58275838A74FFF0121A4D12072A75D6 +:1016800083BCE054EF1207297583BEE054EF1207C4 +:10169000297583C0E054EF1207297583BCE044101C +:1016A0001207297583BEE044101207297583C0E034 +:1016B0004410F0AF58E559120878020AFFE4F558D3 +:1016C0007D01F559AF35FEFC12091512072A758305 +:1016D000B674101207297583B87410120729758320 +:1016E000BA74101207297583BC7410120729758308 +:1016F000BE74101207297583C074101207297583F0 +:1017000090E41207297583C2E41207297583C4E4A3 +:10171000120729758392E41207297583C6E412071C +:10172000297583C8E4F0AF58FEE55912087A020A19 +:10173000FFE5E230E46CE5E754C064407064E5091D +:10174000C45430FEE50825E025E054C04EFEEF54B9 +:101750003F4EFDE52BAE2A7802C333CE33CED8F907 +:10176000F5828E83EDF0E52BAE2A7802C333CE33BB +:10177000CED8F9FFF5828E83A3E5FEF08F828E83AB +:10178000A3A3E5FDF08F828E83A3A3A3E5FCF0C3A2 +:10179000E52B94FAE52A94005008052BE52B7002FE +:1017A000052A22E4FFE4F558F556F5577482FC1239 +:1017B0000E048C83E0F510547FF0E5104480120E87 +:1017C00098EDF07E0A120E047583A0E020E026DE7C +:1017D000F40557E55770020556E5142401FDE4337E +:1017E000FCD3E5579DE5569C40D9E50A942050026C +:1017F000050A43E108C231120E047583A6E05512B2 +:1018000065127003D23122C23122900726E0FAA37A +:10181000E0F5828A83E0F541E539C395414026E54C +:10182000399541C39FEE12076B40047C0180027C16 +:1018300000E541643F60047B0180027B00EC5B605B +:101840002905418028C3E5419539C39FEE12076BF6 +:1018500040047F0180027F00E54160047E01800238 +:101860007E00EF5E600415418003853941853A4072 +:1018700022E5E230E460E5E130E25BE50970047FF7 +:101880000180027F00E50870047E0180027E00EE88 +:101890005F604353F9F8E5E230E43BE5E130E22EE6 +:1018A00043FA0253FAFBE4F510909470E510F0E56A +:1018B000E130E2E7909470E06510600343FA0405BC +:1018C00010909470E510F070E612000680E153FA73 +:1018D000FD53FAFB80C0228F54120006E5E130E090 +:1018E000047F0180027F00E57ED3940540047E01E1 +:1018F00080027E00EE4F603D855411E5E220E1322A +:1019000074CE121A0530E7047D0180027D008F82BB +:101910008E83E030E6047F0180027F00EF5D70156A +:101920001215C674CE121A0530E607E04480F04363 +:10193000F98012187122120E44E51625E025E024E4 +:10194000B0F582E4341AF583E493F50FE51625E04B +:1019500025E024B1F582E4341AF583E493F50E1200 +:101960000E65F510E50F54F0120E1775838CEFF02D +:10197000E50F30E00C120E04758386E04440F080E1 +:101980000A120E04758386E054BFF0120E9175831F +:1019900082E50EF0227F05121731120E04120E336B +:1019A0007402F0748EFE120E04120E0BEFF0751519 +:1019B00070120FF72034057515108003751550123D +:1019C0000FF72034047410800274F02515F51512F9 +:1019D0000E21EFF0121091203417E5156430600CE1 +:1019E00074102515F515B48003E4F515120E21EFDA +:1019F000F022F0E50B25E025E02482F582E43407AF +:101A0000F583227488FEE5084407FFF5828E83E0A3 +:101A100022F0E5084407F58222F0E054C08F828E60 +:101A200083F022EF4407F582758386E05410D39447 +:101A30000022F0900715E004F0224406F582758339 +:101A40009EE022FEEF4407F5828E83E022E49007B9 +:101A50002AF0A3F012072A758382E0547F12072927 +:101A6000E04480F01210FC12081F7583A0E020E013 +:101A70001A90072BE004F0700690072AE004F0901B +:101A8000072AE0B410E1A3E0B400DCEE44A6FCEFCA +:101A90004407F5828C83E0F532EE44A8FEEF44075C +:101AA000F5828E83E0F5332201201100042000909E +:101AB00000200F9200210F9400220F9600230F9810 +:101AC00000240F9A00250F9C00260F9E00270FA0D0 +:101AD000012001A2012101A4012201A6012301A8E4 +:101AE000012401AA012501AC012601AE012701B0A4 +:101AF000012801B400280FB640280FB8612801CB97 +:101B0000EFCBCAEECA7F01E4FDEB4A7024E508F58D +:101B10008274B6120829E508F58274B8120829E51E +:101B200008F58274BA1208297E007C00120AFF8030 +:101B300012900726120735E541F090072412073569 +:101B4000E540F012072A75838EE41207297401120A +:101B50000729E4F022E4F526F52753E1FEF52A757E +:101B60002B01F5087F0112173130301C901AA9E4BF +:101B700093F510901FF9E493F510900041E493F56C +:101B800010901ECAE493F5107F02121731120F5401 +:101B90007F03121731120006E5E230E70912100048 +:101BA00030300312110002004712081F7583D0E085 +:101BB000C4540FFD7543017544FF1208AA7404F064 +:101BC000753B01ED14600C14600B14600F2403705E +:101BD0000B800980001208A704F080061208A77481 +:101BE00004F0EE4482FEEF4407F5828E83E5451251 +:101BF00008BE758382E531F002114C8E608F611250 +:101C00001EA5E4FFCEEDCEEED39561E56012076B25 +:101C1000403974202EF582E43403F583E07003FF2D +:101C200080261208E2FDC39F401ECFEDCFEB4A7025 +:101C30000B8D421208EEF5418E40800C1208E2F541 +:101C4000381208EEF5398E3A1E80BC22755801E52F +:101C500035700C1207CCE0F54A1207D8E0F54CE5D8 +:101C600035B4040C1207E4E0F54A1207F0E0F54C35 +:101C7000E535B401047F0180027F00E535B402043C +:101C80007E0180027E00EE4F600C1207FCE0F54AF8 +:101C9000120808E0F54C85414985404B22755B01EF +:101CA000900724120735E0541FFFD3940250048F8D +:101CB000588005EF24FEF558EFC394184005755978 +:101CC000188004EF04F55985435AAF587E00AD598A +:101CD0007C00AB5B7A00121541AF5A7E0012180AE5 +:101CE000AF5B7E00021AFFE5E230E70E121003C27E +:101CF000303030031210FF203328E5E730E70512BB +:101D00000EA2800DE5FEC394205006120EA243F9E8 +:101D100008E5F230E70353F97FE5F15470D39400FE +:101D200050D822120E04758380E4F0E508440712AF +:101D30000DFD758384120E02758386120E02758363 +:101D40008CE054F3120E0375838E120E0275839489 +:101D5000E054FBF02212072A75838EE412072974DF +:101D600001120729E41208BE75838CE04420120892 +:101D7000BEE054DFF07484850882F583E0547FF080 +:101D8000E04480F022755601E4FDF557AF35FEFCC6 +:101D9000120915121C9D121E7A121C4CAF577E00A0 +:101DA000AD567C00120444AF567E000211EE75560B +:101DB00001E4FDF557AF35FEFC120915121C9D120A +:101DC0001E7A121C4CAF577E00AD567C00120444A4 +:101DD000AF567E000211EEE4F516120E44FEE50841 +:101DE0004405FF120E658F828E83F00516E516C33B +:101DF000941440E6E508120E2BE4F022E4F558F5C1 +:101E000059F55AFFFEAD58FC1209157F047E00AD4E +:101E1000587C001209157F027E00AD587C00020933 +:101E200015E53C253EFCE5422400FBE433FAECC317 +:101E30009BEA12076B400B8C42E53D253FF5418F35 +:101E4000402212090B227484F5188508198519821D +:101E5000851883E0547FF0E04480F0E04480F02275 +:101E6000EF4E700B12072A7583D2E054DFF0221276 +:101E7000072A7583D2E04420F02275580190072686 +:101E8000120735E0543FF541120732E0543FF54068 +:101E900022755602E4F557121DFCAF577E00AD5671 +:101EA0007C00020444E4F542F541F540F538F5398B +:101EB000F53A22EF5407FFE5F954F84FF5F9227F80 +:101EC00001E4FE0F0EBEFFFB2201200001042000F2 +:101ED0000000000000000000000000000000000002 +:101EE00000000000000000000000000000000000F2 +:101EF00000000000000000000000000000000000E2 +:101F000000000000000000000000000000000000D1 +:101F100000000000000000000000000000000000C1 +:101F200000000000000000000000000000000000B1 +:101F300000000000000000000000000000000000A1 +:101F40000000000000000000000000000000000091 +:101F50000000000000000000000000000000000081 +:101F60000000000000000000000000000000000071 +:101F70000000000000000000000000000000000061 +:101F80000000000000000000000000000000000051 +:101F90000000000000000000000000000000000041 +:101FA0000000000000000000000000000000000031 +:101FB0000000000000000000000000000000000021 +:101FC0000000000000000000000000000000000011 +:101FD0000000000000000000000000000000000001 +:101FE00000000000000000000000000000000000F1 +:101FF000000000000000000001201100042000810A +:00000001FF -- cgit v1.2.1 From 124dff01afbdbff251f0385beca84ba1b9adda68 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Fri, 5 Apr 2013 20:42:05 +0200 Subject: netfilter: don't reset nf_trace in nf_reset() Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++++ net/core/dev.c | 1 + 2 files changed, 5 insertions(+) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 72b396751de7..b8292d8cc9fa 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2641,6 +2641,10 @@ static inline void nf_reset(struct sk_buff *skb) nf_bridge_put(skb->nf_bridge); skb->nf_bridge = NULL; #endif +} + +static inline void nf_reset_trace(struct sk_buff *skb) +{ #if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE) skb->nf_trace = 0; #endif diff --git a/net/core/dev.c b/net/core/dev.c index 13e6447f0398..e7d68ed8aafe 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1639,6 +1639,7 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb) skb->mark = 0; secpath_reset(skb); nf_reset(skb); + nf_reset_trace(skb); return netif_rx(skb); } EXPORT_SYMBOL_GPL(dev_forward_skb); -- cgit v1.2.1 From a58e0be6f6b3eb2079b0b8fedc9df6fa86869f1e Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 22 Mar 2013 12:52:59 -0400 Subject: SUNRPC: Remove extra xprt_put() While testing error cases where rpc_new_client() fails, I saw some oopses. If rpc_new_client() fails, it already invokes xprt_put(). Thus __rpc_clone_client() does not need to invoke it again. Introduced by commit 1b63a751 "SUNRPC: Refactor rpc_clone_client()" Fri Sep 14, 2012. Signed-off-by: Chuck Lever Cc: stable@vger.kernel.org [>=3.7] Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index dcc446e7fbf6..9df26b785dc7 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -512,7 +512,7 @@ static struct rpc_clnt *__rpc_clone_client(struct rpc_create_args *args, new = rpc_new_client(args, xprt); if (IS_ERR(new)) { err = PTR_ERR(new); - goto out_put; + goto out_err; } atomic_inc(&clnt->cl_count); @@ -525,8 +525,6 @@ static struct rpc_clnt *__rpc_clone_client(struct rpc_create_args *args, new->cl_chatty = clnt->cl_chatty; return new; -out_put: - xprt_put(xprt); out_err: dprintk("RPC: %s: returned error %d\n", __func__, err); return ERR_PTR(err); -- cgit v1.2.1 From b193d59a4863ea670872d76dc99231ddeb598625 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 4 Apr 2013 15:55:00 -0400 Subject: NFSv4: Fix a memory leak in nfs4_discover_server_trunking When we assign a new rpc_client to clp->cl_rpcclient, we need to destroy the old one. Signed-off-by: Trond Myklebust Cc: Chuck Lever Cc: stable@vger.kernel.org [>=3.7] --- fs/nfs/nfs4state.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 6ace365c6334..d41a3518509f 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1886,7 +1886,13 @@ again: status = PTR_ERR(clnt); break; } - clp->cl_rpcclient = clnt; + /* Note: this is safe because we haven't yet marked the + * client as ready, so we are the only user of + * clp->cl_rpcclient + */ + clnt = xchg(&clp->cl_rpcclient, clnt); + rpc_shutdown_client(clnt); + clnt = clp->cl_rpcclient; goto again; case -NFS4ERR_MINOR_VERS_MISMATCH: -- cgit v1.2.1 From 7b1f1fd1842e6ede25183c267ae733a7f67f00bc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 5 Apr 2013 16:11:11 -0400 Subject: NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list It is unsafe to use list_for_each_entry_safe() here, because when we drop the nn->nfs_client_lock, we pin the _current_ list entry and ensure that it stays in the list, but we don't do the same for the _next_ list entry. Use of list_for_each_entry() is therefore the correct thing to do. Also fix the refcounting in nfs41_walk_client_list(). Finally, ensure that the nfs_client has finished being initialised and, in the case of NFSv4.1, that the session is set up. Signed-off-by: Trond Myklebust Cc: Chuck Lever Cc: Bryan Schumaker Cc: stable@vger.kernel.org [>= 3.7] --- fs/nfs/nfs4client.c | 44 ++++++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 16 deletions(-) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index ac4fc9a8fdbc..c7b346f8cc44 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -300,7 +300,7 @@ int nfs40_walk_client_list(struct nfs_client *new, struct rpc_cred *cred) { struct nfs_net *nn = net_generic(new->cl_net, nfs_net_id); - struct nfs_client *pos, *n, *prev = NULL; + struct nfs_client *pos, *prev = NULL; struct nfs4_setclientid_res clid = { .clientid = new->cl_clientid, .confirm = new->cl_confirm, @@ -308,10 +308,23 @@ int nfs40_walk_client_list(struct nfs_client *new, int status = -NFS4ERR_STALE_CLIENTID; spin_lock(&nn->nfs_client_lock); - list_for_each_entry_safe(pos, n, &nn->nfs_client_list, cl_share_link) { + list_for_each_entry(pos, &nn->nfs_client_list, cl_share_link) { /* If "pos" isn't marked ready, we can't trust the * remaining fields in "pos" */ - if (pos->cl_cons_state < NFS_CS_READY) + if (pos->cl_cons_state > NFS_CS_READY) { + atomic_inc(&pos->cl_count); + spin_unlock(&nn->nfs_client_lock); + + if (prev) + nfs_put_client(prev); + prev = pos; + + status = nfs_wait_client_init_complete(pos); + spin_lock(&nn->nfs_client_lock); + if (status < 0) + continue; + } + if (pos->cl_cons_state != NFS_CS_READY) continue; if (pos->rpc_ops != new->rpc_ops) @@ -423,16 +436,16 @@ int nfs41_walk_client_list(struct nfs_client *new, struct rpc_cred *cred) { struct nfs_net *nn = net_generic(new->cl_net, nfs_net_id); - struct nfs_client *pos, *n, *prev = NULL; + struct nfs_client *pos, *prev = NULL; int status = -NFS4ERR_STALE_CLIENTID; spin_lock(&nn->nfs_client_lock); - list_for_each_entry_safe(pos, n, &nn->nfs_client_list, cl_share_link) { + list_for_each_entry(pos, &nn->nfs_client_list, cl_share_link) { /* If "pos" isn't marked ready, we can't trust the * remaining fields in "pos", especially the client * ID and serverowner fields. Wait for CREATE_SESSION * to finish. */ - if (pos->cl_cons_state < NFS_CS_READY) { + if (pos->cl_cons_state > NFS_CS_READY) { atomic_inc(&pos->cl_count); spin_unlock(&nn->nfs_client_lock); @@ -440,18 +453,17 @@ int nfs41_walk_client_list(struct nfs_client *new, nfs_put_client(prev); prev = pos; - nfs4_schedule_lease_recovery(pos); status = nfs_wait_client_init_complete(pos); - if (status < 0) { - nfs_put_client(pos); - spin_lock(&nn->nfs_client_lock); - continue; + if (status == 0) { + nfs4_schedule_lease_recovery(pos); + status = nfs4_wait_clnt_recover(pos); } - status = pos->cl_cons_state; spin_lock(&nn->nfs_client_lock); if (status < 0) continue; } + if (pos->cl_cons_state != NFS_CS_READY) + continue; if (pos->rpc_ops != new->rpc_ops) continue; @@ -469,17 +481,17 @@ int nfs41_walk_client_list(struct nfs_client *new, continue; atomic_inc(&pos->cl_count); - spin_unlock(&nn->nfs_client_lock); + *result = pos; dprintk("NFS: <-- %s using nfs_client = %p ({%d})\n", __func__, pos, atomic_read(&pos->cl_count)); - - *result = pos; - return 0; + break; } /* No matching nfs_client found. */ spin_unlock(&nn->nfs_client_lock); dprintk("NFS: <-- %s status = %d\n", __func__, status); + if (prev) + nfs_put_client(prev); return status; } #endif /* CONFIG_NFS_V4_1 */ -- cgit v1.2.1 From 918708245e92941df16a634dc201b407d12bcd91 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 3 Apr 2013 15:47:33 +0100 Subject: x86: Fix rebuild with EFI_STUB enabled eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence their .cmd files don't get included by the build machinery, leading to the files always getting rebuilt. Rather than adding the two files individually, take the opportunity and add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment at the top of the file to be shrunk quite a bit. At the same time, remove a pointless flags override line - the variable assigned to was misspelled anyway, and the options added are meaningless for assembly sources. [ hpa: the patch is not minimal, but I am taking it for -urgent anyway since the excess impact of the patch seems to be small enough. ] Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com Cc: Matthew Garrett Cc: Matt Fleming Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 8a84501acb1b..5ef205c5f37b 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o +targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC @@ -29,7 +29,6 @@ VMLINUX_OBJS = $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o \ $(obj)/piggy.o $(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone -$(obj)/efi_stub_$(BITS).o: KBUILD_CLFAGS += -fshort-wchar -mno-red-zone ifeq ($(CONFIG_EFI_STUB), y) VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o @@ -43,7 +42,7 @@ OBJCOPYFLAGS_vmlinux.bin := -R .comment -S $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) -targets += vmlinux.bin.all vmlinux.relocs +targets += $(patsubst $(obj)/%,%,$(VMLINUX_OBJS)) vmlinux.bin.all vmlinux.relocs CMD_RELOCS = arch/x86/tools/relocs quiet_cmd_relocs = RELOCS $@ -- cgit v1.2.1 From f05c124a70a4953a66acbd6d6c601ea1eb5d0fa7 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 5 Apr 2013 14:13:21 -0400 Subject: SUNRPC: Fix a potential memory leak in rpc_new_client If the call to rpciod_up() fails, we currently leak a reference to the struct rpc_xprt. As part of the fix, we also remove the redundant check for xprt!=NULL. This is already taken care of by the callers. Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 9df26b785dc7..d5f35f15af98 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -304,10 +304,8 @@ static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, stru err = rpciod_up(); if (err) goto out_no_rpciod; - err = -EINVAL; - if (!xprt) - goto out_no_xprt; + err = -EINVAL; if (args->version >= program->nrvers) goto out_err; version = program->version[args->version]; @@ -382,10 +380,9 @@ out_no_principal: out_no_stats: kfree(clnt); out_err: - xprt_put(xprt); -out_no_xprt: rpciod_down(); out_no_rpciod: + xprt_put(xprt); return ERR_PTR(err); } -- cgit v1.2.1 From f19799f49d1a03f39d5e53fa1bf05db4820c86c2 Mon Sep 17 00:00:00 2001 From: "wenxiong@linux.vnet.ibm.com" Date: Wed, 27 Feb 2013 12:37:45 -0600 Subject: [SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter Loading ipr modules failed(-22) with msi-x enabled adapter. In ipr_test_msi(), We need to pass the first vector of msix vectors instead of using pdev->irq to request_irq() when adapter enables msix feature. Signed-off-by: Wen Xiong Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index f328089a1060..fadf1528db3d 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -9349,7 +9349,10 @@ static int ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg, struct pci_dev *pdev) int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - rc = request_irq(pdev->irq, ipr_test_intr, 0, IPR_NAME, ioa_cfg); + if (ioa_cfg->intr_flag == IPR_USE_MSIX) + rc = request_irq(ioa_cfg->vectors_info[0].vec, ipr_test_intr, 0, IPR_NAME, ioa_cfg); + else + rc = request_irq(pdev->irq, ipr_test_intr, 0, IPR_NAME, ioa_cfg); if (rc) { dev_err(&pdev->dev, "Can not assign irq %d\n", pdev->irq); return rc; @@ -9371,7 +9374,10 @@ static int ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg, struct pci_dev *pdev) spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - free_irq(pdev->irq, ioa_cfg); + if (ioa_cfg->intr_flag == IPR_USE_MSIX) + free_irq(ioa_cfg->vectors_info[0].vec, ioa_cfg); + else + free_irq(pdev->irq, ioa_cfg); LEAVE; -- cgit v1.2.1 From 95c9f4d4da6c4e445a9dd58c8382356520ea91a0 Mon Sep 17 00:00:00 2001 From: John Gong Date: Wed, 6 Mar 2013 10:43:03 +0800 Subject: [SCSI] libsas: use right function to alloc smp response In fact the disc_resp buffer will be overwrite by smp response, so we never found this typo, correct it by using the right one. Signed-off-by: John Gong Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index aec2e0da5016..588affd6fde7 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -388,7 +388,7 @@ int sas_ex_phy_discover(struct domain_device *dev, int single) if (!disc_req) return -ENOMEM; - disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE); + disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); if (!disc_resp) { kfree(disc_req); return -ENOMEM; -- cgit v1.2.1 From 2b5bebccd282f2527d17ac90cf3ad0d486dd89d8 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Tue, 5 Mar 2013 10:57:56 -0500 Subject: [SCSI] st: Take additional queue ref in st_probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a reference count bug in the SCSI tape driver which can be reproduced with the following: * Boot with slub_debug=FZPU, tape drive attached * echo 1 > /sys/devices/... tape device pci path .../remove * Wait for device removal * echo 1 > /sys/kernel/slab/blkdev_queue/validate * Slub debug complains about corrupted poison pattern In commit 523e1d39 (block: make gendisk hold a reference to its queue) add_disk() and disk_release() were modified to get/put an additional reference on a disk queue to fix a reference counting discrepency between bdev release and SCSI device removal. The ST driver never calls add_disk(), so this commit introduced an extra kref put when the ST driver frees its struct gendisk. Attempts were made to fix this bug at the block level [1] but later abandoned due to floppy driver issues [2]. [1] https://lkml.org/lkml/2012/8/27/354 [2] https://lkml.org/lkml/2012/9/22/113 Signed-off-by: Joe Lawrence Tested-by: Ewan D. Milne Acked-by: Kai Mäkisara Signed-off-by: James Bottomley --- drivers/scsi/st.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 86974471af68..2a32036a9404 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4112,6 +4112,10 @@ static int st_probe(struct device *dev) tpnt->disk = disk; disk->private_data = &tpnt->driver; disk->queue = SDp->request_queue; + /* SCSI tape doesn't register this gendisk via add_disk(). Manually + * take queue reference that release_disk() expects. */ + if (!blk_get_queue(disk->queue)) + goto out_put_disk; tpnt->driver = &st_template; tpnt->device = SDp; @@ -4185,7 +4189,7 @@ static int st_probe(struct device *dev) idr_preload_end(); if (error < 0) { pr_warn("st: idr allocation failed: %d\n", error); - goto out_put_disk; + goto out_put_queue; } tpnt->index = error; sprintf(disk->disk_name, "st%d", tpnt->index); @@ -4211,6 +4215,8 @@ out_remove_devs: spin_lock(&st_index_lock); idr_remove(&st_index_idr, tpnt->index); spin_unlock(&st_index_lock); +out_put_queue: + blk_put_queue(disk->queue); out_put_disk: put_disk(disk); kfree(tpnt); -- cgit v1.2.1 From c4ee22a3708d54d8fb5ee8a23ca08e74abcaedfd Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Thu, 14 Mar 2013 13:52:23 -0500 Subject: [SCSI] ipr: fix addition of abort command to HRRQ free queue The abort command issued by ipr_cancel_op() is being added to the wrong HRRQ free queue after the command returns. Fix it by using the HRRQ pointer in the ipr command struct itself. Signed-off-by: Kleber Sacilotto de Souza Signed-off-by: Wen Xiong Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index fadf1528db3d..21e0a0ae43a8 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5148,7 +5148,7 @@ static int ipr_cancel_op(struct scsi_cmnd *scsi_cmd) ipr_trace; } - list_add_tail(&ipr_cmd->queue, &hrrq->hrrq_free_q); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); if (!ipr_is_naca_model(res)) res->needs_sync_complete = 1; -- cgit v1.2.1 From 9077a944bc3c8bea45a91dc2caa65e96ac4c5f87 Mon Sep 17 00:00:00 2001 From: "wenxiong@linux.vnet.ibm.com" Date: Thu, 14 Mar 2013 13:52:24 -0500 Subject: [SCSI] ipr: dlpar failed when adding an adapter back Reinitialize resource queue prior to freeing resource entries to ensure they are not referenced. This fixes an issue with target_destoy accessing memory after it was freed. Signed-off-by: Wen Xiong Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 21e0a0ae43a8..2197b57fb225 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -9728,6 +9728,7 @@ static void __ipr_remove(struct pci_dev *pdev) spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); flush_work(&ioa_cfg->work_q); + INIT_LIST_HEAD(&ioa_cfg->used_res_q); spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); spin_lock(&ipr_driver_lock); -- cgit v1.2.1 From e9f4f418076f7d08a73667472b5f74a02965221d Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Mon, 25 Mar 2013 02:21:36 -0400 Subject: [SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application." The original patch was not covering all the adapters and firmwares. This commit reverts 3a11711ad00caebee07e262d188cea66f3473c38. Signed-off-by: Joe Carnuccio Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 1 + drivers/scsi/qla2xxx/qla_def.h | 1 - drivers/scsi/qla2xxx/qla_gbl.h | 3 --- drivers/scsi/qla2xxx/qla_init.c | 2 -- drivers/scsi/qla2xxx/qla_mbx.c | 58 ----------------------------------------- 5 files changed, 1 insertion(+), 64 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 1626de52e32a..2bf02147bcce 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -15,6 +15,7 @@ * | Mailbox commands | 0x115b | 0x111a-0x111b | * | | | 0x112c-0x112e | * | | | 0x113a | + * | | | 0x1155-0x1158 | * | Device Discovery | 0x2087 | 0x2020-0x2022, | * | | | 0x2016 | * | Queue Command and IO tracing | 0x3031 | 0x3006-0x300b | diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index c6509911772b..65c5ff75936b 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -863,7 +863,6 @@ typedef struct { #define MBX_1 BIT_1 #define MBX_0 BIT_0 -#define RNID_TYPE_SET_VERSION 0x9 #define RNID_TYPE_ASIC_TEMP 0xC /* diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index eb3ca21a7f17..b310fa97b545 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -357,9 +357,6 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *, dma_addr_t, uint16_t , uint16_t *, extern int qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *); -extern int -qla2x00_set_driver_version(scsi_qla_host_t *, char *); - extern int qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *, uint16_t, uint16_t, uint16_t, uint16_t); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index edf4d14a1335..09eae54387fa 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -619,8 +619,6 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) qla24xx_read_fcp_prio_cfg(vha); - qla2x00_set_driver_version(vha, QLA2XXX_VERSION); - return (rval); } diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 186dd59ce4fa..43345af56431 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3866,64 +3866,6 @@ qla81xx_restart_mpi_firmware(scsi_qla_host_t *vha) return rval; } -int -qla2x00_set_driver_version(scsi_qla_host_t *vha, char *version) -{ - int rval; - mbx_cmd_t mc; - mbx_cmd_t *mcp = &mc; - int len; - uint16_t dwlen; - uint8_t *str; - dma_addr_t str_dma; - struct qla_hw_data *ha = vha->hw; - - if (!IS_FWI2_CAPABLE(ha) || IS_QLA82XX(ha)) - return QLA_FUNCTION_FAILED; - - ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1155, - "Entered %s.\n", __func__); - - str = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &str_dma); - if (!str) { - ql_log(ql_log_warn, vha, 0x1156, - "Failed to allocate driver version param.\n"); - return QLA_MEMORY_ALLOC_FAILED; - } - - memcpy(str, "\x7\x3\x11\x0", 4); - dwlen = str[0]; - len = dwlen * sizeof(uint32_t) - 4; - memset(str + 4, 0, len); - if (len > strlen(version)) - len = strlen(version); - memcpy(str + 4, version, len); - - mcp->mb[0] = MBC_SET_RNID_PARAMS; - mcp->mb[1] = RNID_TYPE_SET_VERSION << 8 | dwlen; - mcp->mb[2] = MSW(LSD(str_dma)); - mcp->mb[3] = LSW(LSD(str_dma)); - mcp->mb[6] = MSW(MSD(str_dma)); - mcp->mb[7] = LSW(MSD(str_dma)); - mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; - mcp->in_mb = MBX_0; - mcp->tov = MBX_TOV_SECONDS; - mcp->flags = 0; - rval = qla2x00_mailbox_command(vha, mcp); - - if (rval != QLA_SUCCESS) { - ql_dbg(ql_dbg_mbx, vha, 0x1157, - "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]); - } else { - ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1158, - "Done %s.\n", __func__); - } - - dma_pool_free(ha->s_dma_pool, str, str_dma); - - return rval; -} - static int qla2x00_read_asic_temperature(scsi_qla_host_t *vha, uint16_t *temp) { -- cgit v1.2.1 From 00876ae85b47cdfe76aa08b1fffb27fd67425f53 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Mon, 25 Mar 2013 02:21:37 -0400 Subject: [SCSI] qla2xxx: Fix crash during firmware dump procedure. System crashes, in initiator mode operation, with qla2xxx_copy_atioqueues() in stack trace when firmware dump is attempted. Check for atio_q_length alone does not indicate if atio_ring is allocated, make explicit check of atio_ring to avoid the crash. Applicable to ISP24xx, ISP25xx, ISP81xx & ISP83xx line of HBAs. Signed-off-by: Arun Easi Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 2 +- drivers/scsi/qla2xxx/qla_init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 2bf02147bcce..fbc305f1c87c 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -402,7 +402,7 @@ qla2xxx_copy_atioqueues(struct qla_hw_data *ha, void *ptr, void *ring; } aq, *aqp; - if (!ha->tgt.atio_q_length) + if (!ha->tgt.atio_ring) return ptr; num_queues = 1; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 09eae54387fa..b59203393cb2 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1397,7 +1397,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) mq_size += ha->max_rsp_queues * (rsp->length * sizeof(response_t)); } - if (ha->tgt.atio_q_length) + if (ha->tgt.atio_ring) mq_size += ha->tgt.atio_q_length * sizeof(request_t); /* Allocate memory for Fibre Channel Event Buffer. */ if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha)) -- cgit v1.2.1 From b03808fdbf98e41391efb732108a6d2fb4e30a76 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Mon, 25 Mar 2013 02:21:38 -0400 Subject: [SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file. Signed-off-by: Giridhar Malavali Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley --- Documentation/scsi/LICENSE.qla2xxx | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx index 27a91cf43d6d..5020b7b5a244 100644 --- a/Documentation/scsi/LICENSE.qla2xxx +++ b/Documentation/scsi/LICENSE.qla2xxx @@ -1,4 +1,4 @@ -Copyright (c) 2003-2012 QLogic Corporation +Copyright (c) 2003-2013 QLogic Corporation QLogic Linux FC-FCoE Driver This program includes a device driver for Linux 3.x. -- cgit v1.2.1 From 4a9fa41bd404b8a572e4af7d2221e423bb729e52 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Mon, 25 Mar 2013 02:21:39 -0400 Subject: [SCSI] qla2xxx: Remove debug code that msleeps for random duration. Signed-off-by: Giridhar Malavali Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 1d82eef4e1eb..b3db9dcc2619 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1938,11 +1938,6 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) "Timer for the VP[%d] has stopped\n", vha->vp_idx); } - /* No pending activities shall be there on the vha now */ - if (ql2xextended_error_logging & ql_dbg_user) - msleep(random32()%10); /* Just to see if something falls on - * the net we have placed below */ - BUG_ON(atomic_read(&vha->vref_count)); qla2x00_free_fcports(vha); -- cgit v1.2.1 From 231ff54e4cc4a6f1ef78fb4e1f94957bbb961aae Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Mon, 25 Mar 2013 02:21:40 -0400 Subject: [SCSI] qla2xxx: Update the driver version to 8.04.00.13-k. Signed-off-by: Giridhar Malavali Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 2b6e478d9e33..ec54036d1e12 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.04.00.08-k" +#define QLA2XXX_VERSION "8.04.00.13-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 4 -- cgit v1.2.1 From 9d85b590057523c2bfe3bea2f62ba9e2701a62db Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 1 Apr 2013 09:44:26 -0500 Subject: [SCSI] ibmvscsi: Fix slave_configure deadlock No locks should be held when calling scsi_adjust_queue_depth so drop the lock in slave_configure prior to calling it. Signed-off-by: Brian King Acked-by: Robert Jennings Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index a044f593e8b9..d0fa4b6c551f 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1899,8 +1899,8 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev) sdev->allow_restart = 1; blk_queue_rq_timeout(sdev->request_queue, 120 * HZ); } - scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); spin_unlock_irqrestore(shost->host_lock, lock_flags); + scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); return 0; } -- cgit v1.2.1 From d4a2618fa77b5e58ec15342972bd3505a1c3f551 Mon Sep 17 00:00:00 2001 From: Lukasz Dorau Date: Wed, 3 Apr 2013 10:27:17 +0200 Subject: [SCSI] libsas: fix handling vacant phy in sas_set_ex_phy() If a result of the SMP discover function is PHY VACANT, the content of discover response structure (dr) is not valid. It sometimes happens that dr->attached_sas_addr can contain even SAS address of other phy. In such case an invalid phy is created, what causes NULL pointer dereference during destruction of expander's phys. So if a result of SMP function is PHY VACANT, the content of discover response structure (dr) must not be copied to phy structure. This patch fixes the following bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [] sysfs_find_dirent+0x12/0x90 Call Trace: [] sysfs_get_dirent+0x35/0x80 [] sysfs_unmerge_group+0x1e/0xb0 [] dpm_sysfs_remove+0x24/0x90 [] device_del+0x44/0x1d0 [] sas_rphy_delete+0x9/0x20 [scsi_transport_sas] [] sas_destruct_devices+0xe6/0x110 [libsas] [] process_one_work+0x16c/0x350 [] worker_thread+0x17a/0x410 [] kthread+0x96/0xa0 [] kernel_thread_helper+0x4/0x10 Signed-off-by: Lukasz Dorau Signed-off-by: Pawel Baldysiak Reviewed-by: Maciej Patelczyk Cc: Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 588affd6fde7..55cbd0180159 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -235,6 +235,17 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) linkrate = phy->linkrate; memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); + /* Handle vacant phy - rest of dr data is not valid so skip it */ + if (phy->phy_state == PHY_VACANT) { + memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + phy->attached_dev_type = NO_DEVICE; + if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) { + phy->phy_id = phy_id; + goto skip; + } else + goto out; + } + phy->attached_dev_type = to_dev_type(dr); if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) goto out; @@ -272,6 +283,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; + skip: if (new_phy) if (sas_phy_add(phy->phy)) { sas_phy_free(phy->phy); -- cgit v1.2.1 From 889d66848b12d891248b03abcb2a42047f8e172a Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Fri, 5 Apr 2013 20:49:46 +0200 Subject: ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_* The usb_control_msg() function expects __u16 types and performs the endianness conversions by itself. However, in three places, a conversion is performed before it is handed over to usb_control_msg(), which leads to a double conversion (= no conversion): * snd_usb_nativeinstruments_boot_quirk() * snd_nativeinstruments_control_get() * snd_nativeinstruments_control_put() Caught by sparse: sound/usb/mixer_quirks.c:512:38: warning: incorrect type in argument 6 (different base types) sound/usb/mixer_quirks.c:512:38: expected unsigned short [unsigned] [usertype] index sound/usb/mixer_quirks.c:512:38: got restricted __le16 [usertype] sound/usb/mixer_quirks.c:543:35: warning: incorrect type in argument 5 (different base types) sound/usb/mixer_quirks.c:543:35: expected unsigned short [unsigned] [usertype] value sound/usb/mixer_quirks.c:543:35: got restricted __le16 [usertype] sound/usb/mixer_quirks.c:543:56: warning: incorrect type in argument 6 (different base types) sound/usb/mixer_quirks.c:543:56: expected unsigned short [unsigned] [usertype] index sound/usb/mixer_quirks.c:543:56: got restricted __le16 [usertype] sound/usb/quirks.c:502:35: warning: incorrect type in argument 5 (different base types) sound/usb/quirks.c:502:35: expected unsigned short [unsigned] [usertype] value sound/usb/quirks.c:502:35: got restricted __le16 [usertype] Signed-off-by: Eldad Zack Acked-by: Daniel Mack Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 4 ++-- sound/usb/quirks.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 497d2741d119..ebe91440a068 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -509,7 +509,7 @@ static int snd_nativeinstruments_control_get(struct snd_kcontrol *kcontrol, else ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, cpu_to_le16(wIndex), + 0, wIndex, &tmp, sizeof(tmp), 1000); up_read(&mixer->chip->shutdown_rwsem); @@ -540,7 +540,7 @@ static int snd_nativeinstruments_control_put(struct snd_kcontrol *kcontrol, else ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - cpu_to_le16(wValue), cpu_to_le16(wIndex), + wValue, wIndex, NULL, 0, 1000); up_read(&mixer->chip->shutdown_rwsem); diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 5325a3869bb7..9c5ab22358b1 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -486,7 +486,7 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) { int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, - cpu_to_le16(1), 0, NULL, 0, 1000); + 1, 0, NULL, 0, 1000); if (ret < 0) return ret; -- cgit v1.2.1 From 8f964525a121f2ff2df948dac908dcc65be21b5b Mon Sep 17 00:00:00 2001 From: Andrew Honig Date: Fri, 29 Mar 2013 09:35:21 -0700 Subject: KVM: Allow cross page reads and writes from cached translations. This patch adds support for kvm_gfn_to_hva_cache_init functions for reads and writes that will cross a page. If the range falls within the same memslot, then this will be a fast operation. If the range is split between two memslots, then the slower kvm_read_guest and kvm_write_guest are used. Tested: Test against kvm_clock unit tests. Signed-off-by: Andrew Honig Signed-off-by: Gleb Natapov --- arch/x86/kvm/lapic.c | 2 +- arch/x86/kvm/x86.c | 13 ++++++------- include/linux/kvm_host.h | 2 +- include/linux/kvm_types.h | 1 + virt/kvm/kvm_main.c | 47 +++++++++++++++++++++++++++++++++++++---------- 5 files changed, 46 insertions(+), 19 deletions(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 02b51dd4e4ad..f77df1c5de6e 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1857,7 +1857,7 @@ int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data) if (!pv_eoi_enabled(vcpu)) return 0; return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data, - addr); + addr, sizeof(u8)); } void kvm_lapic_init(void) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index f19ac0aca60d..e1721324c271 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1823,7 +1823,8 @@ static int kvm_pv_enable_async_pf(struct kvm_vcpu *vcpu, u64 data) return 0; } - if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa)) + if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa, + sizeof(u32))) return 1; vcpu->arch.apf.send_user_only = !(data & KVM_ASYNC_PF_SEND_ALWAYS); @@ -1952,12 +1953,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) gpa_offset = data & ~(PAGE_MASK | 1); - /* Check that the address is 32-byte aligned. */ - if (gpa_offset & (sizeof(struct pvclock_vcpu_time_info) - 1)) - break; - if (kvm_gfn_to_hva_cache_init(vcpu->kvm, - &vcpu->arch.pv_time, data & ~1ULL)) + &vcpu->arch.pv_time, data & ~1ULL, + sizeof(struct pvclock_vcpu_time_info))) vcpu->arch.pv_time_enabled = false; else vcpu->arch.pv_time_enabled = true; @@ -1977,7 +1975,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) return 1; if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.st.stime, - data & KVM_STEAL_VALID_BITS)) + data & KVM_STEAL_VALID_BITS, + sizeof(struct kvm_steal_time))) return 1; vcpu->arch.st.msr_val = data; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index cad77fe09d77..c13958251927 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -518,7 +518,7 @@ int kvm_write_guest(struct kvm *kvm, gpa_t gpa, const void *data, int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc, void *data, unsigned long len); int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc, - gpa_t gpa); + gpa_t gpa, unsigned long len); int kvm_clear_guest_page(struct kvm *kvm, gfn_t gfn, int offset, int len); int kvm_clear_guest(struct kvm *kvm, gpa_t gpa, unsigned long len); struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn); diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h index fa7cc7244cbd..b0bcce0ddc95 100644 --- a/include/linux/kvm_types.h +++ b/include/linux/kvm_types.h @@ -71,6 +71,7 @@ struct gfn_to_hva_cache { u64 generation; gpa_t gpa; unsigned long hva; + unsigned long len; struct kvm_memory_slot *memslot; }; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index adc68feb5c5a..f18013f09e68 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1541,21 +1541,38 @@ int kvm_write_guest(struct kvm *kvm, gpa_t gpa, const void *data, } int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc, - gpa_t gpa) + gpa_t gpa, unsigned long len) { struct kvm_memslots *slots = kvm_memslots(kvm); int offset = offset_in_page(gpa); - gfn_t gfn = gpa >> PAGE_SHIFT; + gfn_t start_gfn = gpa >> PAGE_SHIFT; + gfn_t end_gfn = (gpa + len - 1) >> PAGE_SHIFT; + gfn_t nr_pages_needed = end_gfn - start_gfn + 1; + gfn_t nr_pages_avail; ghc->gpa = gpa; ghc->generation = slots->generation; - ghc->memslot = gfn_to_memslot(kvm, gfn); - ghc->hva = gfn_to_hva_many(ghc->memslot, gfn, NULL); - if (!kvm_is_error_hva(ghc->hva)) + ghc->len = len; + ghc->memslot = gfn_to_memslot(kvm, start_gfn); + ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn, &nr_pages_avail); + if (!kvm_is_error_hva(ghc->hva) && nr_pages_avail >= nr_pages_needed) { ghc->hva += offset; - else - return -EFAULT; - + } else { + /* + * If the requested region crosses two memslots, we still + * verify that the entire region is valid here. + */ + while (start_gfn <= end_gfn) { + ghc->memslot = gfn_to_memslot(kvm, start_gfn); + ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn, + &nr_pages_avail); + if (kvm_is_error_hva(ghc->hva)) + return -EFAULT; + start_gfn += nr_pages_avail; + } + /* Use the slow path for cross page reads and writes. */ + ghc->memslot = NULL; + } return 0; } EXPORT_SYMBOL_GPL(kvm_gfn_to_hva_cache_init); @@ -1566,8 +1583,13 @@ int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc, struct kvm_memslots *slots = kvm_memslots(kvm); int r; + BUG_ON(len > ghc->len); + if (slots->generation != ghc->generation) - kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa); + kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa, ghc->len); + + if (unlikely(!ghc->memslot)) + return kvm_write_guest(kvm, ghc->gpa, data, len); if (kvm_is_error_hva(ghc->hva)) return -EFAULT; @@ -1587,8 +1609,13 @@ int kvm_read_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc, struct kvm_memslots *slots = kvm_memslots(kvm); int r; + BUG_ON(len > ghc->len); + if (slots->generation != ghc->generation) - kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa); + kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa, ghc->len); + + if (unlikely(!ghc->memslot)) + return kvm_read_guest(kvm, ghc->gpa, data, len); if (kvm_is_error_hva(ghc->hva)) return -EFAULT; -- cgit v1.2.1 From c7426bce5933d16b492a34e42ae77e26fceddff6 Mon Sep 17 00:00:00 2001 From: Robert Tivy Date: Thu, 28 Mar 2013 18:41:43 -0700 Subject: remoteproc: fix FW_CONFIG typo Fix obvious typo introduced in commit e121aefa7d9f10eee5cf26ed47129237a05d940b ("remoteproc: fix missing CONFIG_FW_LOADER configurations"). Cc: stable@vger.kernel.org Signed-off-by: Robert Tivy [cc stable, slight subject change] Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index cc1f7bf53fd0..c6d77e20622c 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -4,7 +4,7 @@ menu "Remoteproc drivers" config REMOTEPROC tristate depends on HAS_DMA - select FW_CONFIG + select FW_LOADER select VIRTIO config OMAP_REMOTEPROC -- cgit v1.2.1 From 50a75a8914539c5dcd441c5f54d237a666a426fd Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Sun, 7 Apr 2013 04:53:15 +0000 Subject: ipv6/tcp: Stop processing ICMPv6 redirect messages Tetja Rediske found that if the host receives an ICMPv6 redirect message after sending a SYN+ACK, the connection will be reset. He bisected it down to 093d04d (ipv6: Change skb->data before using icmpv6_notify() to propagate redirect), but the origin of the bug comes from ec18d9a26 (ipv6: Add redirect support to all protocol icmp error handlers.). The bug simply did not trigger prior to 093d04d, because skb->data did not point to the inner IP header and thus icmpv6_notify did not call the correct err_handler. This patch adds the missing "goto out;" in tcp_v6_err. After receiving an ICMPv6 Redirect, we should not continue processing the ICMP in tcp_v6_err, as this may trigger the removal of request-socks or setting sk_err(_soft). Reported-by: Tetja Rediske Signed-off-by: Christoph Paasch Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index f6d629fd6aee..46a5be85be87 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -386,6 +386,7 @@ static void tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, if (dst) dst->ops->redirect(dst, sk, skb); + goto out; } if (type == ICMPV6_PKT_TOOBIG) { -- cgit v1.2.1 From aa8b4be3ac049c8b1df2a87e4d1d902ccfc1f7a9 Mon Sep 17 00:00:00 2001 From: Jay Estabrook Date: Sun, 7 Apr 2013 21:36:09 +1200 Subject: alpha: Add irongate_io to PCI bus resources Fixes a NULL pointer dereference at boot on UP1500. Cc: stable@vger.kernel.org Reviewed-and-Tested-by: Matt Turner Signed-off-by: Jay Estabrook Signed-off-by: Matt Turner Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds --- arch/alpha/kernel/sys_nautilus.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c index 4d4c046f708d..1383f8601a93 100644 --- a/arch/alpha/kernel/sys_nautilus.c +++ b/arch/alpha/kernel/sys_nautilus.c @@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr) extern void free_reserved_mem(void *, void *); extern void pcibios_claim_one_bus(struct pci_bus *); +static struct resource irongate_io = { + .name = "Irongate PCI IO", + .flags = IORESOURCE_IO, +}; static struct resource irongate_mem = { .name = "Irongate PCI MEM", .flags = IORESOURCE_MEM, @@ -209,6 +213,7 @@ nautilus_init_pci(void) irongate = pci_get_bus_and_slot(0, 0); bus->self = irongate; + bus->resource[0] = &irongate_io; bus->resource[1] = &irongate_mem; pci_bus_size_bridges(bus); -- cgit v1.2.1 From cd8d2331756751b6aeb855a3c9cb0a92fbd9c725 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Sun, 7 Apr 2013 21:36:10 +1200 Subject: alpha: makefile: don't enforce small data model for kernel builds Due to all of the goodness being packed into today's kernels, the resulting image isn't as slim as it once was. In light of this, don't pass -msmall-data to gcc, which otherwise results in link failures due to impossible relocations when compiling anything but the most trivial configurations. Cc: Richard Henderson Cc: Ivan Kokshaysky Reviewed-by: Matt Turner Tested-by: Thorsten Kranzkowski Signed-off-by: Will Deacon Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds --- arch/alpha/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile index 4759fe751aa1..2cc3cc519c54 100644 --- a/arch/alpha/Makefile +++ b/arch/alpha/Makefile @@ -12,7 +12,7 @@ NM := $(NM) -B LDFLAGS_vmlinux := -static -N #-relax CHECKFLAGS += -D__alpha__ -m64 -cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data +cflags-y := -pipe -mno-fp-regs -ffixed-8 cflags-y += $(call cc-option, -fno-jump-tables) cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 -- cgit v1.2.1 From e20800fd5cec2a75639a32e956b1cdc023cb87ce Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Sun, 7 Apr 2013 21:36:11 +1200 Subject: alpha: irq: run all handlers with interrupts disabled Linux has expected that interrupt handlers are executed with local interrupts disabled for a while now, so ensure that this is the case on Alpha even for non-device interrupts such as IPIs. Without this patch, secondary boot results in the following backtrace: warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0() trace: __local_bh_enable+0xb8/0xd0 irq_enter+0x74/0xa0 scheduler_ipi+0x50/0x100 handle_ipi+0x84/0x260 do_entint+0x1ac/0x2e0 irq_exit+0x60/0xa0 handle_irq+0x98/0x100 do_entint+0x2c8/0x2e0 ret_from_sys_call+0x0/0x10 load_balance+0x3e4/0x870 cpu_idle+0x24/0x80 rcu_eqs_enter_common.isra.38+0x0/0x120 cpu_idle+0x40/0x80 rest_init+0xc0/0xe0 _stext+0x1c/0x20 A similar dump occurs if you try to reboot using magic-sysrq. Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Reviewed-by: Matt Turner Signed-off-by: Will Deacon Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds --- arch/alpha/kernel/irq.c | 7 ------- arch/alpha/kernel/irq_alpha.c | 9 ++++++++- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index 2872accd2215..7b2be251c30f 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -117,13 +117,6 @@ handle_irq(int irq) return; } - /* - * From here we must proceed with IPL_MAX. Note that we do not - * explicitly enable interrupts afterwards - some MILO PALcode - * (namely LX164 one) seems to have severe problems with RTI - * at IPL 0. - */ - local_irq_disable(); irq_enter(); generic_handle_irq_desc(irq, desc); irq_exit(); diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 772ddfdb71a8..1216dfb4fcc5 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector, unsigned long la_ptr, struct pt_regs *regs) { struct pt_regs *old_regs; + + /* + * Disable interrupts during IRQ handling. + * Note that there is no matching local_irq_enable() due to + * severe problems with RTI at IPL0 and some MILO PALcode + * (namely LX164). + */ + local_irq_disable(); switch (type) { case 0: #ifdef CONFIG_SMP @@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector, { long cpu; - local_irq_disable(); smp_percpu_timer_interrupt(regs); cpu = smp_processor_id(); if (cpu != boot_cpuid) { -- cgit v1.2.1 From e74e25929ce4d4f5f5f4bae585b214bacef6960b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Sun, 7 Apr 2013 21:36:12 +1200 Subject: alpha: irq: remove deprecated use of IRQF_DISABLED Interrupt handlers are always invoked with interrupts disabled, so remove all uses of the deprecated IRQF_DISABLED flag. Cc: Richard Henderson Cc: Ivan Kokshaysky Reviewed-by: Matt Turner Signed-off-by: Will Deacon Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/floppy.h | 2 +- arch/alpha/kernel/irq_alpha.c | 1 - arch/alpha/kernel/sys_titan.c | 14 +++++++------- 3 files changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h index 46cefbd50e73..bae97eb19d26 100644 --- a/arch/alpha/include/asm/floppy.h +++ b/arch/alpha/include/asm/floppy.h @@ -26,7 +26,7 @@ #define fd_disable_irq() disable_irq(FLOPPY_IRQ) #define fd_cacheflush(addr,size) /* nothing */ #define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\ - IRQF_DISABLED, "floppy", NULL) + 0, "floppy", NULL) #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL) #ifdef CONFIG_PCI diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 1216dfb4fcc5..f433fc11877a 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -229,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr, struct irqaction timer_irqaction = { .handler = timer_interrupt, - .flags = IRQF_DISABLED, .name = "timer", }; diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 5cf4a481b8c5..a53cf03f49d5 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -280,15 +280,15 @@ titan_late_init(void) * all reported to the kernel as machine checks, so the handler * is a nop so it can be called to count the individual events. */ - titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED, + titan_request_irq(63+16, titan_intr_nop, 0, "CChip Error", NULL); - titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED, + titan_request_irq(62+16, titan_intr_nop, 0, "PChip 0 H_Error", NULL); - titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED, + titan_request_irq(61+16, titan_intr_nop, 0, "PChip 1 H_Error", NULL); - titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED, + titan_request_irq(60+16, titan_intr_nop, 0, "PChip 0 C_Error", NULL); - titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED, + titan_request_irq(59+16, titan_intr_nop, 0, "PChip 1 C_Error", NULL); /* @@ -348,9 +348,9 @@ privateer_init_pci(void) * Hook a couple of extra err interrupts that the * common titan code won't. */ - titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED, + titan_request_irq(53+16, titan_intr_nop, 0, "NMI", NULL); - titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED, + titan_request_irq(50+16, titan_intr_nop, 0, "Temperature Warning", NULL); /* -- cgit v1.2.1 From 9b3e617f3df53822345a8573b6d358f6b9e5ed87 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:47 +0000 Subject: atm: update msg_namelen in vcc_recvmsg() The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about vcc_recvmsg() not filling the msg_name in case it was set. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/atm/common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/atm/common.c b/net/atm/common.c index 7b491006eaf4..737bef59ce89 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -531,6 +531,8 @@ int vcc_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, struct sk_buff *skb; int copied, error = -EINVAL; + msg->msg_namelen = 0; + if (sock->state != SS_CONNECTED) return -ENOTCONN; -- cgit v1.2.1 From ef3313e84acbf349caecae942ab3ab731471f1a1 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:48 +0000 Subject: ax25: fix info leak via msg_name in ax25_recvmsg() When msg_namelen is non-zero the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Additionally the msg_namelen value is updated to sizeof(struct full_sockaddr_ax25) but is not always filled up to this size. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Cc: Ralf Baechle Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/ax25/af_ax25.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index 7b11f8bc5071..e277e38f736b 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1642,6 +1642,7 @@ static int ax25_recvmsg(struct kiocb *iocb, struct socket *sock, ax25_address src; const unsigned char *mac = skb_mac_header(skb); + memset(sax, 0, sizeof(struct full_sockaddr_ax25)); ax25_addr_parse(mac + 1, skb->data - mac - 1, &src, NULL, &digi, NULL, NULL); sax->sax25_family = AF_AX25; -- cgit v1.2.1 From 4683f42fde3977bdb4e8a09622788cc8b5313778 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:49 +0000 Subject: Bluetooth: fix possible info leak in bt_sock_recvmsg() In case the socket is already shutting down, bt_sock_recvmsg() returns with 0 without updating msg_namelen leading to net/socket.c leaking the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix this by moving the msg_namelen assignment in front of the shutdown test. Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/bluetooth/af_bluetooth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index d3ee69b35a78..0d1b08cc76e1 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -230,6 +230,8 @@ int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock, if (flags & (MSG_OOB)) return -EOPNOTSUPP; + msg->msg_namelen = 0; + skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) { if (sk->sk_shutdown & RCV_SHUTDOWN) @@ -237,8 +239,6 @@ int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock, return err; } - msg->msg_namelen = 0; - copied = skb->len; if (len < copied) { msg->msg_flags |= MSG_TRUNC; -- cgit v1.2.1 From e11e0455c0d7d3d62276a0c55d9dfbc16779d691 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:50 +0000 Subject: Bluetooth: RFCOMM - Fix missing msg_namelen update in rfcomm_sock_recvmsg() If RFCOMM_DEFER_SETUP is set in the flags, rfcomm_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_stream_recvmsg(). Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index c23bae86263b..7c9224bcce17 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -608,6 +608,7 @@ static int rfcomm_sock_recvmsg(struct kiocb *iocb, struct socket *sock, if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); + msg->msg_namelen = 0; return 0; } -- cgit v1.2.1 From c8c499175f7d295ef867335bceb9a76a2c3cdc38 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:51 +0000 Subject: Bluetooth: SCO - Fix missing msg_namelen update in sco_sock_recvmsg() If the socket is in state BT_CONNECT2 and BT_SK_DEFER_SETUP is set in the flags, sco_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_recvmsg(). Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/bluetooth/sco.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index fad0302bdb32..fb6192c9812e 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -665,6 +665,7 @@ static int sco_sock_recvmsg(struct kiocb *iocb, struct socket *sock, test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { hci_conn_accept(pi->conn->hcon, 0); sk->sk_state = BT_CONFIG; + msg->msg_namelen = 0; release_sock(sk); return 0; -- cgit v1.2.1 From 2d6fbfe733f35c6b355c216644e08e149c61b271 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:52 +0000 Subject: caif: Fix missing msg_namelen update in caif_seqpkt_recvmsg() The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about caif_seqpkt_recvmsg() not filling the msg_name in case it was set. Cc: Sjur Braendeland Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/caif/caif_socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index 095259f83902..ff2ff3ce6965 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -286,6 +286,8 @@ static int caif_seqpkt_recvmsg(struct kiocb *iocb, struct socket *sock, if (m->msg_flags&MSG_OOB) goto read_error; + m->msg_namelen = 0; + skb = skb_recv_datagram(sk, flags, 0 , &ret); if (!skb) goto read_error; -- cgit v1.2.1 From 5ae94c0d2f0bed41d6718be743985d61b7f5c47d Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:53 +0000 Subject: irda: Fix missing msg_namelen update in irda_recvmsg_dgram() The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about irda_recvmsg_dgram() not filling the msg_name in case it was set. Cc: Samuel Ortiz Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/irda/af_irda.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index d28e7f014cc6..e493b3397ae3 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -1386,6 +1386,8 @@ static int irda_recvmsg_dgram(struct kiocb *iocb, struct socket *sock, IRDA_DEBUG(4, "%s()\n", __func__); + msg->msg_namelen = 0; + skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &err); if (!skb) -- cgit v1.2.1 From a5598bd9c087dc0efc250a5221e5d0e6f584ee88 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:54 +0000 Subject: iucv: Fix missing msg_namelen update in iucv_sock_recvmsg() The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about iucv_sock_recvmsg() not filling the msg_name in case it was set. Cc: Ursula Braun Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index a7d11ffe4284..bf6935820001 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1328,6 +1328,8 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, struct sk_buff *skb, *rskb, *cskb; int err = 0; + msg->msg_namelen = 0; + if ((sk->sk_state == IUCV_DISCONN) && skb_queue_empty(&iucv->backlog_skb_q) && skb_queue_empty(&sk->sk_receive_queue) && -- cgit v1.2.1 From b860d3cc62877fad02863e2a08efff69a19382d2 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:55 +0000 Subject: l2tp: fix info leak in l2tp_ip6_recvmsg() The L2TP code for IPv6 fails to initialize the l2tp_conn_id member of struct sockaddr_l2tpip6 and therefore leaks four bytes kernel stack in l2tp_ip6_recvmsg() in case msg_name is set. Initialize l2tp_conn_id with 0 to avoid the info leak. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index c74f5a91ff6a..b8a6039314e8 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -690,6 +690,7 @@ static int l2tp_ip6_recvmsg(struct kiocb *iocb, struct sock *sk, lsa->l2tp_addr = ipv6_hdr(skb)->saddr; lsa->l2tp_flowinfo = 0; lsa->l2tp_scope_id = 0; + lsa->l2tp_conn_id = 0; if (ipv6_addr_type(&lsa->l2tp_addr) & IPV6_ADDR_LINKLOCAL) lsa->l2tp_scope_id = IP6CB(skb)->iif; } -- cgit v1.2.1 From c77a4b9cffb6215a15196ec499490d116dfad181 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:56 +0000 Subject: llc: Fix missing msg_namelen update in llc_ui_recvmsg() For stream sockets the code misses to update the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. The msg_namelen update is also missing for datagram sockets in case the socket is shutting down during receive. Fix both issues by setting msg_namelen to 0 early. It will be updated later if we're going to fill the msg_name member. Cc: Arnaldo Carvalho de Melo Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/llc/af_llc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 88709882c464..48aaa89253e0 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -720,6 +720,8 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock, int target; /* Read at least this many bytes */ long timeo; + msg->msg_namelen = 0; + lock_sock(sk); copied = -ENOTCONN; if (unlikely(sk->sk_type == SOCK_STREAM && sk->sk_state == TCP_LISTEN)) -- cgit v1.2.1 From 3ce5efad47b62c57a4f5c54248347085a750ce0e Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:57 +0000 Subject: netrom: fix info leak via msg_name in nr_recvmsg() In case msg_name is set the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Also the sax25_ndigis member does not get assigned, leaking four more bytes. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Cc: Ralf Baechle Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/netrom/af_netrom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index d1fa1d9ffd2e..7fcb307dea47 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1173,6 +1173,7 @@ static int nr_recvmsg(struct kiocb *iocb, struct socket *sock, } if (sax != NULL) { + memset(sax, 0, sizeof(sax)); sax->sax25_family = AF_NETROM; skb_copy_from_linear_data_offset(skb, 7, sax->sax25_call.ax25_call, AX25_ADDR_LEN); -- cgit v1.2.1 From d26d6504f23e803824e8ebd14e52d4fc0a0b09cb Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:58 +0000 Subject: NFC: llcp: fix info leaks via msg_name in llcp_sock_recvmsg() The code in llcp_sock_recvmsg() does not initialize all the members of struct sockaddr_nfc_llcp when filling the sockaddr info. Nor does it initialize the padding bytes of the structure inserted by the compiler for alignment. Also, if the socket is in state LLCP_CLOSED or is shutting down during receive the msg_namelen member is not updated to 0 while otherwise returning with 0, i.e. "success". The msg_namelen update is also missing for stream and seqpacket sockets which don't fill the sockaddr info. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix the first issue by initializing the memory used for sockaddr info with memset(0). Fix the second one by setting msg_namelen to 0 early. It will be updated later if we're going to fill the msg_name member. Cc: Lauro Ramos Venancio Cc: Aloisio Almeida Jr Cc: Samuel Ortiz Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/nfc/llcp/sock.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index 8f025746f337..6c94447ec414 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -646,6 +646,8 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, pr_debug("%p %zu\n", sk, len); + msg->msg_namelen = 0; + lock_sock(sk); if (sk->sk_state == LLCP_CLOSED && @@ -691,6 +693,7 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, pr_debug("Datagram socket %d %d\n", ui_cb->dsap, ui_cb->ssap); + memset(sockaddr, 0, sizeof(*sockaddr)); sockaddr->sa_family = AF_NFC; sockaddr->nfc_protocol = NFC_PROTO_NFC_DEP; sockaddr->dsap = ui_cb->dsap; -- cgit v1.2.1 From 4a184233f21645cf0b719366210ed445d1024d72 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:51:59 +0000 Subject: rose: fix info leak via msg_name in rose_recvmsg() The code in rose_recvmsg() does not initialize all of the members of struct sockaddr_rose/full_sockaddr_rose when filling the sockaddr info. Nor does it initialize the padding bytes of the structure inserted by the compiler for alignment. This will lead to leaking uninitialized kernel stack bytes in net/socket.c. Fix the issue by initializing the memory used for sockaddr info with memset(0). Cc: Ralf Baechle Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/rose/af_rose.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index cf68e6e4054a..9c8347451597 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1253,6 +1253,7 @@ static int rose_recvmsg(struct kiocb *iocb, struct socket *sock, skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied); if (srose != NULL) { + memset(srose, 0, msg->msg_namelen); srose->srose_family = AF_ROSE; srose->srose_addr = rose->dest_addr; srose->srose_call = rose->dest_call; -- cgit v1.2.1 From 60085c3d009b0df252547adb336d1ccca5ce52ec Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:52:00 +0000 Subject: tipc: fix info leaks via msg_name in recv_msg/recv_stream The code in set_orig_addr() does not initialize all of the members of struct sockaddr_tipc when filling the sockaddr info -- namely the union is only partly filled. This will make recv_msg() and recv_stream() -- the only users of this function -- leak kernel stack memory as the msg_name member is a local variable in net/socket.c. Additionally to that both recv_msg() and recv_stream() fail to update the msg_namelen member to 0 while otherwise returning with 0, i.e. "success". This is the case for, e.g., non-blocking sockets. This will lead to a 128 byte kernel stack leak in net/socket.c. Fix the first issue by initializing the memory of the union with memset(0). Fix the second one by setting msg_namelen to 0 early as it will be updated later if we're going to fill the msg_name member. Cc: Jon Maloy Cc: Allan Stephens Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/tipc/socket.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index a9622b6cd916..515ce38e4f4c 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -790,6 +790,7 @@ static void set_orig_addr(struct msghdr *m, struct tipc_msg *msg) if (addr) { addr->family = AF_TIPC; addr->addrtype = TIPC_ADDR_ID; + memset(&addr->addr, 0, sizeof(addr->addr)); addr->addr.id.ref = msg_origport(msg); addr->addr.id.node = msg_orignode(msg); addr->addr.name.domain = 0; /* could leave uninitialized */ @@ -904,6 +905,9 @@ static int recv_msg(struct kiocb *iocb, struct socket *sock, goto exit; } + /* will be updated in set_orig_addr() if needed */ + m->msg_namelen = 0; + timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT); restart: @@ -1013,6 +1017,9 @@ static int recv_stream(struct kiocb *iocb, struct socket *sock, goto exit; } + /* will be updated in set_orig_addr() if needed */ + m->msg_namelen = 0; + target = sock_rcvlowat(sk, flags & MSG_WAITALL, buf_len); timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT); -- cgit v1.2.1 From 680d04e0ba7e926233e3b9cee59125ce181f66ba Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:52:01 +0000 Subject: VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue() In case we received no data on the call to skb_recv_datagram(), i.e. skb->data is NULL, vmci_transport_dgram_dequeue() will return with 0 without updating msg_namelen leading to net/socket.c leaking the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix this by moving the already existing msg_namelen assignment a few lines above. Cc: Andy King Cc: Dmitry Torokhov Cc: George Zhang Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/vmw_vsock/vmci_transport.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c index 1f6508e249ae..5e04d3d96285 100644 --- a/net/vmw_vsock/vmci_transport.c +++ b/net/vmw_vsock/vmci_transport.c @@ -1736,6 +1736,8 @@ static int vmci_transport_dgram_dequeue(struct kiocb *kiocb, if (flags & MSG_OOB || flags & MSG_ERRQUEUE) return -EOPNOTSUPP; + msg->msg_namelen = 0; + /* Retrieve the head sk_buff from the socket's receive queue. */ err = 0; skb = skb_recv_datagram(&vsk->sk, flags, noblock, &err); @@ -1768,7 +1770,6 @@ static int vmci_transport_dgram_dequeue(struct kiocb *kiocb, if (err) goto out; - msg->msg_namelen = 0; if (msg->msg_name) { struct sockaddr_vm *vm_addr; -- cgit v1.2.1 From d5e0d0f607a7a029c6563a0470d88255c89a8d11 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Apr 2013 01:52:02 +0000 Subject: VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg() The code misses to update the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Cc: Andy King Cc: Dmitry Torokhov Cc: George Zhang Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/vmw_vsock/af_vsock.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index d8079daf1bde..7f93e2a42d7a 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -1670,6 +1670,8 @@ vsock_stream_recvmsg(struct kiocb *kiocb, vsk = vsock_sk(sk); err = 0; + msg->msg_namelen = 0; + lock_sock(sk); if (sk->sk_state != SS_CONNECTED) { -- cgit v1.2.1 From 259c9a1f9e0fa6610c5d7c15ba658dd4fd007bf5 Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Tue, 2 Apr 2013 12:35:31 +0000 Subject: sctp: remove 'sridhar' from maintainers list Update SCTP maintainers list. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 836a6183c37f..376704078d65 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6951,7 +6951,6 @@ F: drivers/scsi/st* SCTP PROTOCOL M: Vlad Yasevich -M: Sridhar Samudrala M: Neil Horman L: linux-sctp@vger.kernel.org W: http://lksctp.sourceforge.net -- cgit v1.2.1 From cb28ea3b13b86fb23448525f34720e659bda7aa8 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 7 Apr 2013 05:36:23 +0000 Subject: bnx2x: Fix KR2 rapid link flap Check KR2 recovery time at the beginning of the work-around function. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 77ebae0ac64a..0283f343b0d1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -13437,13 +13437,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params, { struct bnx2x *bp = params->bp; u16 base_page, next_page, not_kr2_device, lane; - int sigdet = bnx2x_warpcore_get_sigdet(phy, params); - - if (!sigdet) { - if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) - bnx2x_kr2_recovery(params, vars, phy); - return; - } + int sigdet; /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery * since some switches tend to reinit the AN process and clear the @@ -13454,6 +13448,16 @@ static void bnx2x_check_kr2_wa(struct link_params *params, vars->check_kr2_recovery_cnt--; return; } + + sigdet = bnx2x_warpcore_get_sigdet(phy, params); + if (!sigdet) { + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + bnx2x_kr2_recovery(params, vars, phy); + DP(NETIF_MSG_LINK, "No sigdet\n"); + } + return; + } + lane = bnx2x_get_warpcore_lane(phy, params); CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, lane); -- cgit v1.2.1 From 31880c37c11e28cb81c70757e38392b42e695dc6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 7 Apr 2013 20:49:54 -0700 Subject: Linux 3.9-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 58a165b02af1..6db672b15bda 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v1.2.1 From 9fb2640159f9d4f5a2a9d60e490482d4cbecafdb Mon Sep 17 00:00:00 2001 From: Michael Wolf Date: Fri, 5 Apr 2013 10:41:40 +0000 Subject: powerpc: pSeries_lpar_hpte_remove fails from Adjunct partition being performed before the ANDCOND test Some versions of pHyp will perform the adjunct partition test before the ANDCOND test. The result of this is that H_RESOURCE can be returned and cause the BUG_ON condition to occur. The HPTE is not removed. So add a check for H_RESOURCE, it is ok if this HPTE is not removed as pSeries_lpar_hpte_remove is looking for an HPTE to remove and not a specific HPTE to remove. So it is ok to just move on to the next slot and try again. Cc: stable@vger.kernel.org Signed-off-by: Michael Wolf Signed-off-by: Stephen Rothwell --- arch/powerpc/platforms/pseries/lpar.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 0da39fed355a..299731e9036b 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -186,7 +186,13 @@ static long pSeries_lpar_hpte_remove(unsigned long hpte_group) (0x1UL << 4), &dummy1, &dummy2); if (lpar_rc == H_SUCCESS) return i; - BUG_ON(lpar_rc != H_NOT_FOUND); + + /* + * The test for adjunct partition is performed before the + * ANDCOND test. H_RESOURCE may be returned, so we need to + * check for that as well. + */ + BUG_ON(lpar_rc != H_NOT_FOUND && lpar_rc != H_RESOURCE); slot_offset++; slot_offset &= 0x7; -- cgit v1.2.1 From c2fccc1c9f7c81700cbac2120a4ad5441dd37004 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 8 Apr 2013 10:12:11 +0200 Subject: Revert "loop: cleanup partitions when detaching loop device" This reverts commit 8761a3dc1f07b163414e2215a2cadbb4cfe2a107. There are situations where the destruction path is called with the bdev->bd_mutex already held, which then deadlocks in loop_clr_fd(). The normal partition cleanup does a trylock() on the mutex, but it'd be nice to have a more bullet proof method in loop. So punt this more involved fix to the next merge window, and just back out this buggy fix for now. Signed-off-by: Jens Axboe --- block/partition-generic.c | 1 - drivers/block/loop.c | 21 ++------------------- 2 files changed, 2 insertions(+), 20 deletions(-) diff --git a/block/partition-generic.c b/block/partition-generic.c index ae95ee6a58aa..789cdea05893 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -257,7 +257,6 @@ void delete_partition(struct gendisk *disk, int partno) hd_struct_put(part); } -EXPORT_SYMBOL(delete_partition); static ssize_t whole_disk_show(struct device *dev, struct device_attribute *attr, char *buf) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index fe5f6403417f..ee13a82f3f5e 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1044,29 +1044,12 @@ static int loop_clr_fd(struct loop_device *lo) lo->lo_state = Lo_unbound; /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); + if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev) + ioctl_by_bdev(bdev, BLKRRPART, 0); lo->lo_flags = 0; if (!part_shift) lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN; mutex_unlock(&lo->lo_ctl_mutex); - - /* - * Remove all partitions, since BLKRRPART won't remove user - * added partitions when max_part=0 - */ - if (bdev) { - struct disk_part_iter piter; - struct hd_struct *part; - - mutex_lock_nested(&bdev->bd_mutex, 1); - invalidate_partition(bdev->bd_disk, 0); - disk_part_iter_init(&piter, bdev->bd_disk, - DISK_PITER_INCL_EMPTY); - while ((part = disk_part_iter_next(&piter))) - delete_partition(bdev->bd_disk, part->partno); - disk_part_iter_exit(&piter); - mutex_unlock(&bdev->bd_mutex); - } - /* * Need not hold lo_ctl_mutex to fput backing file. * Calling fput holding lo_ctl_mutex triggers a circular -- cgit v1.2.1 From a1cbcaa9ea87b87a96b9fc465951dcf36e459ca2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 6 Apr 2013 10:10:27 +0200 Subject: sched_clock: Prevent 64bit inatomicity on 32bit systems The sched_clock_remote() implementation has the following inatomicity problem on 32bit systems when accessing the remote scd->clock, which is a 64bit value. CPU0 CPU1 sched_clock_local() sched_clock_remote(CPU0) ... remote_clock = scd[CPU0]->clock read_low32bit(scd[CPU0]->clock) cmpxchg64(scd->clock,...) read_high32bit(scd[CPU0]->clock) While the update of scd->clock is using an atomic64 mechanism, the readout on the remote cpu is not, which can cause completely bogus readouts. It is a quite rare problem, because it requires the update to hit the narrow race window between the low/high readout and the update must go across the 32bit boundary. The resulting misbehaviour is, that CPU1 will see the sched_clock on CPU1 ~4 seconds ahead of it's own and update CPU1s sched_clock value to this bogus timestamp. This stays that way due to the clamping implementation for about 4 seconds until the synchronization with CLOCK_MONOTONIC undoes the problem. The issue is hard to observe, because it might only result in a less accurate SCHED_OTHER timeslicing behaviour. To create observable damage on realtime scheduling classes, it is necessary that the bogus update of CPU1 sched_clock happens in the context of an realtime thread, which then gets charged 4 seconds of RT runtime, which results in the RT throttler mechanism to trigger and prevent scheduling of RT tasks for a little less than 4 seconds. So this is quite unlikely as well. The issue was quite hard to decode as the reproduction time is between 2 days and 3 weeks and intrusive tracing makes it less likely, but the following trace recorded with trace_clock=global, which uses sched_clock_local(), gave the final hint: -0 0d..30 400269.477150: hrtimer_cancel: hrtimer=0xf7061e80 -0 0d..30 400269.477151: hrtimer_start: hrtimer=0xf7061e80 ... irq/20-S-587 1d..32 400273.772118: sched_wakeup: comm= ... target_cpu=0 -0 0dN.30 400273.772118: hrtimer_cancel: hrtimer=0xf7061e80 What happens is that CPU0 goes idle and invokes sched_clock_idle_sleep_event() which invokes sched_clock_local() and CPU1 runs a remote wakeup for CPU0 at the same time, which invokes sched_remote_clock(). The time jump gets propagated to CPU0 via sched_remote_clock() and stays stale on both cores for ~4 seconds. There are only two other possibilities, which could cause a stale sched clock: 1) ktime_get() which reads out CLOCK_MONOTONIC returns a sporadic wrong value. 2) sched_clock() which reads the TSC returns a sporadic wrong value. #1 can be excluded because sched_clock would continue to increase for one jiffy and then go stale. #2 can be excluded because it would not make the clock jump forward. It would just result in a stale sched_clock for one jiffy. After quite some brain twisting and finding the same pattern on other traces, sched_clock_remote() remained the only place which could cause such a problem and as explained above it's indeed racy on 32bit systems. So while on 64bit systems the readout is atomic, we need to verify the remote readout on 32bit machines. We need to protect the local->clock readout in sched_clock_remote() on 32bit as well because an NMI could hit between the low and the high readout, call sched_clock_local() and modify local->clock. Thanks to Siegfried Wulsch for bearing with my debug requests and going through the tedious tasks of running a bunch of reproducer systems to generate the debug information which let me decode the issue. Reported-by: Siegfried Wulsch Acked-by: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304051544160.21884@ionos Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org --- kernel/sched/clock.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/kernel/sched/clock.c b/kernel/sched/clock.c index c685e31492df..c3ae1446461c 100644 --- a/kernel/sched/clock.c +++ b/kernel/sched/clock.c @@ -176,10 +176,36 @@ static u64 sched_clock_remote(struct sched_clock_data *scd) u64 this_clock, remote_clock; u64 *ptr, old_val, val; +#if BITS_PER_LONG != 64 +again: + /* + * Careful here: The local and the remote clock values need to + * be read out atomic as we need to compare the values and + * then update either the local or the remote side. So the + * cmpxchg64 below only protects one readout. + * + * We must reread via sched_clock_local() in the retry case on + * 32bit as an NMI could use sched_clock_local() via the + * tracer and hit between the readout of + * the low32bit and the high 32bit portion. + */ + this_clock = sched_clock_local(my_scd); + /* + * We must enforce atomic readout on 32bit, otherwise the + * update on the remote cpu can hit inbetween the readout of + * the low32bit and the high 32bit portion. + */ + remote_clock = cmpxchg64(&scd->clock, 0, 0); +#else + /* + * On 64bit the read of [my]scd->clock is atomic versus the + * update, so we can avoid the above 32bit dance. + */ sched_clock_local(my_scd); again: this_clock = my_scd->clock; remote_clock = scd->clock; +#endif /* * Use the opportunity that we have both locks -- cgit v1.2.1 From fd9b86d37a600488dbd80fe60cca46b822bff1cd Mon Sep 17 00:00:00 2001 From: libin Date: Mon, 8 Apr 2013 14:39:12 +0800 Subject: sched/debug: Fix sd->*_idx limit range avoiding overflow Commit 201c373e8e ("sched/debug: Limit sd->*_idx range on sysctl") was an incomplete bug fix. This patch fixes sd->*_idx limit range to [0 ~ CPU_LOAD_IDX_MAX-1] avoiding array overflow caused by setting sd->*_idx to CPU_LOAD_IDX_MAX on sysctl. Signed-off-by: Libin Cc: Cc: Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/51626610.2040607@huawei.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 306943f531a3..fa077929e315 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4933,7 +4933,7 @@ static void sd_free_ctl_entry(struct ctl_table **tablep) } static int min_load_idx = 0; -static int max_load_idx = CPU_LOAD_IDX_MAX; +static int max_load_idx = CPU_LOAD_IDX_MAX-1; static void set_table_entry(struct ctl_table *entry, -- cgit v1.2.1 From c97847d2f0eb77c806e650e04d9bbcf79fa05730 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 8 Apr 2013 11:48:27 +0800 Subject: perf: Fix strncpy() use, always make sure it's NUL terminated For NUL terminated string, always make sure that there's '\0' at the end. In our case we need a return value, so still use strncpy() and fix up the tail explicitly. (strlcpy() returns the size, not the pointer) Signed-off-by: Chen Gang Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/51623E0B.7070101@asianux.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 59412d037eed..7f0d67ea3f48 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -4737,7 +4737,8 @@ static void perf_event_mmap_event(struct perf_mmap_event *mmap_event) } else { if (arch_vma_name(mmap_event->vma)) { name = strncpy(tmp, arch_vma_name(mmap_event->vma), - sizeof(tmp)); + sizeof(tmp) - 1); + tmp[sizeof(tmp) - 1] = '\0'; goto got_name; } -- cgit v1.2.1 From 67012ab1d2ce871afea4ee55408f233f97d09d07 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 8 Apr 2013 12:06:44 +0800 Subject: perf: Fix strncpy() use, use strlcpy() instead of strncpy() For NUL terminated string we always need to set '\0' at the end. Signed-off-by: Chen Gang Cc: rostedt@goodmis.org Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/51624254.30301@asianux.com Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4f1dade56981..3f5046a4d81b 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -132,7 +132,7 @@ static char *default_bootup_tracer; static int __init set_cmdline_ftrace(char *str) { - strncpy(bootup_tracer_buf, str, MAX_TRACER_SIZE); + strlcpy(bootup_tracer_buf, str, MAX_TRACER_SIZE); default_bootup_tracer = bootup_tracer_buf; /* We are using ftrace early, expand it */ ring_buffer_expanded = 1; @@ -162,7 +162,7 @@ static char *trace_boot_options __initdata; static int __init set_trace_boot_options(char *str) { - strncpy(trace_boot_options_buf, str, MAX_TRACER_SIZE); + strlcpy(trace_boot_options_buf, str, MAX_TRACER_SIZE); trace_boot_options = trace_boot_options_buf; return 0; } -- cgit v1.2.1 From 75761cc15877c155b3849b4e0e0cb3f897faf471 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 8 Apr 2013 12:12:39 +0800 Subject: ftrace: Fix strncpy() use, use strlcpy() instead of strncpy() For NUL terminated string we always need to set '\0' at the end. Signed-off-by: Chen Gang Cc: rostedt@goodmis.org Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/516243B7.9020405@asianux.com Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 6893d5a2bf08..db143742704b 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -3441,14 +3441,14 @@ static char ftrace_filter_buf[FTRACE_FILTER_SIZE] __initdata; static int __init set_ftrace_notrace(char *str) { - strncpy(ftrace_notrace_buf, str, FTRACE_FILTER_SIZE); + strlcpy(ftrace_notrace_buf, str, FTRACE_FILTER_SIZE); return 1; } __setup("ftrace_notrace=", set_ftrace_notrace); static int __init set_ftrace_filter(char *str) { - strncpy(ftrace_filter_buf, str, FTRACE_FILTER_SIZE); + strlcpy(ftrace_filter_buf, str, FTRACE_FILTER_SIZE); return 1; } __setup("ftrace_filter=", set_ftrace_filter); -- cgit v1.2.1 From e614b3332a4f3f264a26da28e5a1f4cc3aea3974 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 4 Apr 2013 10:57:48 +0200 Subject: sched/cputime: Fix accounting on multi-threaded processes Recent commit 6fac4829 ("cputime: Use accessors to read task cputime stats") introduced a bug, where we account many times the cputime of the first thread, instead of cputimes of all the different threads. Signed-off-by: Stanislaw Gruszka Acked-by: Frederic Weisbecker Cc: Oleg Nesterov Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20130404085740.GA2495@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/cputime.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c index ed12cbb135f4..e93cca92f38b 100644 --- a/kernel/sched/cputime.c +++ b/kernel/sched/cputime.c @@ -310,7 +310,7 @@ void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times) t = tsk; do { - task_cputime(tsk, &utime, &stime); + task_cputime(t, &utime, &stime); times->utime += utime; times->stime += stime; times->sum_exec_runtime += task_sched_runtime(t); -- cgit v1.2.1 From 05a324b9c50c3edbe0ce48ee3e37b210859ef1ae Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 4 Apr 2013 23:39:38 +0000 Subject: net: ipv4: reset check_lifetime_work after changing lifetime This will result in calling check_lifetime in nearest opportunity and that function will adjust next time to call check_lifetime correctly. Without this, check_lifetime is called in time computed by previous run, not affecting modified lifetime. Introduced by: commit 5c766d642bcaf "ipv4: introduce address lifetime" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 96083b7a436b..00386e02e708 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -804,6 +804,8 @@ static int inet_rtm_newaddr(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg return -EEXIST; ifa = ifa_existing; set_ifa_lifetime(ifa, valid_lft, prefered_lft); + cancel_delayed_work(&check_lifetime_work); + schedule_delayed_work(&check_lifetime_work, 0); rtmsg_ifa(RTM_NEWADDR, ifa, nlh, NETLINK_CB(skb).portid); blocking_notifier_call_chain(&inetaddr_chain, NETDEV_UP, ifa); } -- cgit v1.2.1 From c988d1e8cbf722e34ee6124b8b89d47fec655b51 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 4 Apr 2013 23:39:39 +0000 Subject: net: ipv4: fix schedule while atomic bug in check_lifetime() move might_sleep operations out of the rcu_read_lock() section. Also fix iterating over ifa_dev->ifa_list Introduced by: commit 5c766d642bcaf "ipv4: introduce address lifetime" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 58 +++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 42 insertions(+), 16 deletions(-) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 00386e02e708..c6287cd978c2 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -587,13 +587,16 @@ static void check_lifetime(struct work_struct *work) { unsigned long now, next, next_sec, next_sched; struct in_ifaddr *ifa; + struct hlist_node *n; int i; now = jiffies; next = round_jiffies_up(now + ADDR_CHECK_FREQUENCY); - rcu_read_lock(); for (i = 0; i < IN4_ADDR_HSIZE; i++) { + bool change_needed = false; + + rcu_read_lock(); hlist_for_each_entry_rcu(ifa, &inet_addr_lst[i], hash) { unsigned long age; @@ -606,16 +609,7 @@ static void check_lifetime(struct work_struct *work) if (ifa->ifa_valid_lft != INFINITY_LIFE_TIME && age >= ifa->ifa_valid_lft) { - struct in_ifaddr **ifap ; - - rtnl_lock(); - for (ifap = &ifa->ifa_dev->ifa_list; - *ifap != NULL; ifap = &ifa->ifa_next) { - if (*ifap == ifa) - inet_del_ifa(ifa->ifa_dev, - ifap, 1); - } - rtnl_unlock(); + change_needed = true; } else if (ifa->ifa_preferred_lft == INFINITY_LIFE_TIME) { continue; @@ -625,10 +619,8 @@ static void check_lifetime(struct work_struct *work) next = ifa->ifa_tstamp + ifa->ifa_valid_lft * HZ; - if (!(ifa->ifa_flags & IFA_F_DEPRECATED)) { - ifa->ifa_flags |= IFA_F_DEPRECATED; - rtmsg_ifa(RTM_NEWADDR, ifa, NULL, 0); - } + if (!(ifa->ifa_flags & IFA_F_DEPRECATED)) + change_needed = true; } else if (time_before(ifa->ifa_tstamp + ifa->ifa_preferred_lft * HZ, next)) { @@ -636,8 +628,42 @@ static void check_lifetime(struct work_struct *work) ifa->ifa_preferred_lft * HZ; } } + rcu_read_unlock(); + if (!change_needed) + continue; + rtnl_lock(); + hlist_for_each_entry_safe(ifa, n, &inet_addr_lst[i], hash) { + unsigned long age; + + if (ifa->ifa_flags & IFA_F_PERMANENT) + continue; + + /* We try to batch several events at once. */ + age = (now - ifa->ifa_tstamp + + ADDRCONF_TIMER_FUZZ_MINUS) / HZ; + + if (ifa->ifa_valid_lft != INFINITY_LIFE_TIME && + age >= ifa->ifa_valid_lft) { + struct in_ifaddr **ifap; + + for (ifap = &ifa->ifa_dev->ifa_list; + *ifap != NULL; ifap = &(*ifap)->ifa_next) { + if (*ifap == ifa) { + inet_del_ifa(ifa->ifa_dev, + ifap, 1); + break; + } + } + } else if (ifa->ifa_preferred_lft != + INFINITY_LIFE_TIME && + age >= ifa->ifa_preferred_lft && + !(ifa->ifa_flags & IFA_F_DEPRECATED)) { + ifa->ifa_flags |= IFA_F_DEPRECATED; + rtmsg_ifa(RTM_NEWADDR, ifa, NULL, 0); + } + } + rtnl_unlock(); } - rcu_read_unlock(); next_sec = round_jiffies_up(next); next_sched = next; -- cgit v1.2.1 From fd5c07a8d6a10c7112b19f3b0d428627c62b06ab Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 5 Apr 2013 11:44:39 +0000 Subject: hyperv: Fix a kernel warning from netvsc_linkstatus_callback() The warning about local_bh_enable inside IRQ happens when disconnecting a virtual NIC. The reason for the warning is -- netif_tx_disable() is called when the NIC is disconnected. And it's called within irq context. netif_tx_disable() calls local_bh_enable() which displays warning if in irq. The fix is to remove the unnecessary netif_tx_disable & wake_queue() in the netvsc_linkstatus_callback(). Reported-by: Richard Genoud Tested-by: Long Li Tested-by: Richard Genoud Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 5f85205cd12b..8341b62e5521 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -241,13 +241,11 @@ void netvsc_linkstatus_callback(struct hv_device *device_obj, if (status == 1) { netif_carrier_on(net); - netif_wake_queue(net); ndev_ctx = netdev_priv(net); schedule_delayed_work(&ndev_ctx->dwork, 0); schedule_delayed_work(&ndev_ctx->dwork, msecs_to_jiffies(20)); } else { netif_carrier_off(net); - netif_tx_disable(net); } } -- cgit v1.2.1 From f1ea3cd70110d482ef1ce6ef158df113aa366f43 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 5 Apr 2013 11:44:40 +0000 Subject: hyperv: Fix RNDIS send_completion code path In some cases, the VM_PKT_COMP message can arrive later than RNDIS completion message, which will free the packet memory. This may cause panic due to access to freed memory in netvsc_send_completion(). This patch fixes this problem by removing rndis_filter_send_request_completion() from the code path. The function was a no-op. Reported-by: Long Li Tested-by: Long Li Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 17 ++++++++++++----- drivers/net/hyperv/rndis_filter.c | 14 +------------- 2 files changed, 13 insertions(+), 18 deletions(-) diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 1cd77483da50..f5f0f09e4cc5 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -470,8 +470,10 @@ static void netvsc_send_completion(struct hv_device *device, packet->trans_id; /* Notify the layer above us */ - nvsc_packet->completion.send.send_completion( - nvsc_packet->completion.send.send_completion_ctx); + if (nvsc_packet) + nvsc_packet->completion.send.send_completion( + nvsc_packet->completion.send. + send_completion_ctx); num_outstanding_sends = atomic_dec_return(&net_device->num_outstanding_sends); @@ -498,6 +500,7 @@ int netvsc_send(struct hv_device *device, int ret = 0; struct nvsp_message sendMessage; struct net_device *ndev; + u64 req_id; net_device = get_outbound_net_device(device); if (!net_device) @@ -518,20 +521,24 @@ int netvsc_send(struct hv_device *device, 0xFFFFFFFF; sendMessage.msg.v1_msg.send_rndis_pkt.send_buf_section_size = 0; + if (packet->completion.send.send_completion) + req_id = (u64)packet; + else + req_id = 0; + if (packet->page_buf_cnt) { ret = vmbus_sendpacket_pagebuffer(device->channel, packet->page_buf, packet->page_buf_cnt, &sendMessage, sizeof(struct nvsp_message), - (unsigned long)packet); + req_id); } else { ret = vmbus_sendpacket(device->channel, &sendMessage, sizeof(struct nvsp_message), - (unsigned long)packet, + req_id, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); - } if (ret == 0) { diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index 2b657d4d63a8..0775f0aefd1e 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -61,9 +61,6 @@ struct rndis_request { static void rndis_filter_send_completion(void *ctx); -static void rndis_filter_send_request_completion(void *ctx); - - static struct rndis_device *get_rndis_device(void) { @@ -241,10 +238,7 @@ static int rndis_filter_send_request(struct rndis_device *dev, packet->page_buf[0].len; } - packet->completion.send.send_completion_ctx = req;/* packet; */ - packet->completion.send.send_completion = - rndis_filter_send_request_completion; - packet->completion.send.send_completion_tid = (unsigned long)dev; + packet->completion.send.send_completion = NULL; ret = netvsc_send(dev->net_dev->dev, packet); return ret; @@ -999,9 +993,3 @@ static void rndis_filter_send_completion(void *ctx) /* Pass it back to the original handler */ filter_pkt->completion(filter_pkt->completion_ctx); } - - -static void rndis_filter_send_request_completion(void *ctx) -{ - /* Noop */ -} -- cgit v1.2.1 From b50b72de2f2feed4adfbd8e18610a393b5a04cc7 Mon Sep 17 00:00:00 2001 From: willy tarreau Date: Sat, 6 Apr 2013 08:47:01 +0000 Subject: net: mvneta: enable features before registering the driver It seems that the reason why the dev features were ignored was because they were enabled after registeration. Signed-off-by: Willy Tarreau Acked-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index cd345b8969bc..1e628ce57201 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2771,16 +2771,17 @@ static int mvneta_probe(struct platform_device *pdev) netif_napi_add(dev, &pp->napi, mvneta_poll, pp->weight); + dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; + dev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM; + dev->vlan_features |= NETIF_F_SG | NETIF_F_IP_CSUM; + dev->priv_flags |= IFF_UNICAST_FLT; + err = register_netdev(dev); if (err < 0) { dev_err(&pdev->dev, "failed to register\n"); goto err_deinit; } - dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; - dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM; - dev->priv_flags |= IFF_UNICAST_FLT; - netdev_info(dev, "mac: %pM\n", dev->dev_addr); platform_set_drvdata(pdev, pp->dev); -- cgit v1.2.1 From 2930e04d00e113ae24bb2b7c2b58de7b648a62c7 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Tue, 26 Mar 2013 17:33:00 -0400 Subject: tracing: Fix race with update_max_tr_single and changing tracers The commit 34600f0e9 "tracing: Fix race with max_tr and changing tracers" fixed the updating of the main buffers with the race of changing tracers, but left out the fix to the updating of just a per cpu buffer. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4f1dade56981..7ba7fc76f9eb 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -744,8 +744,11 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) return; WARN_ON_ONCE(!irqs_disabled()); - if (WARN_ON_ONCE(!current_trace->allocated_snapshot)) + if (!current_trace->allocated_snapshot) { + /* Only the nop tracer should hit this when disabling */ + WARN_ON_ONCE(current_trace != &nop_trace); return; + } arch_spin_lock(&ftrace_max_lock); -- cgit v1.2.1 From 5000c418840b309251c5887f0b56503aae30f84c Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Tue, 26 Mar 2013 17:53:03 +0100 Subject: ftrace: Consistently restore trace function on sysctl enabling If we reenable ftrace via syctl, we currently set ftrace_trace_function based on the previous simplistic algorithm. This is inconsistent with what update_ftrace_function does. So better call that helper instead. Link: http://lkml.kernel.org/r/5151D26F.1070702@siemens.com Cc: stable@vger.kernel.org Signed-off-by: Jan Kiszka Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 6893d5a2bf08..cc4943c7ce6d 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -4555,12 +4555,8 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, ftrace_startup_sysctl(); /* we are starting ftrace again */ - if (ftrace_ops_list != &ftrace_list_end) { - if (ftrace_ops_list->next == &ftrace_list_end) - ftrace_trace_function = ftrace_ops_list->func; - else - ftrace_trace_function = ftrace_ops_list_func; - } + if (ftrace_ops_list != &ftrace_list_end) + update_ftrace_function(); } else { /* stopping ftrace calls (just send to ftrace_stub) */ -- cgit v1.2.1 From 395b97a3aeff0b8d949ee3e67bf8c11c5ffd6861 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Wed, 27 Mar 2013 09:31:28 -0400 Subject: ftrace: Do not call stub functions in control loop The function tracing control loop used by perf spits out a warning if the called function is not a control function. This is because the control function references a per cpu allocated data structure on struct ftrace_ops that is not allocated for other types of functions. commit 0a016409e42 "ftrace: Optimize the function tracer list loop" Had an optimization done to all function tracing loops to optimize for a single registered ops. Unfortunately, this allows for a slight race when tracing starts or ends, where the stub function might be called after the current registered ops is removed. In this case we get the following dump: root# perf stat -e ftrace:function sleep 1 [ 74.339105] WARNING: at include/linux/ftrace.h:209 ftrace_ops_control_func+0xde/0xf0() [ 74.349522] Hardware name: PRIMERGY RX200 S6 [ 74.357149] Modules linked in: sg igb iTCO_wdt ptp pps_core iTCO_vendor_support i7core_edac dca lpc_ich i2c_i801 coretemp edac_core crc32c_intel mfd_core ghash_clmulni_intel dm_multipath acpi_power_meter pcspk r microcode vhost_net tun macvtap macvlan nfsd kvm_intel kvm auth_rpcgss nfs_acl lockd sunrpc uinput xfs libcrc32c sd_mod crc_t10dif sr_mod cdrom mgag200 i2c_algo_bit drm_kms_helper ttm qla2xxx mptsas ahci drm li bahci scsi_transport_sas mptscsih libata scsi_transport_fc i2c_core mptbase scsi_tgt dm_mirror dm_region_hash dm_log dm_mod [ 74.446233] Pid: 1377, comm: perf Tainted: G W 3.9.0-rc1 #1 [ 74.453458] Call Trace: [ 74.456233] [] warn_slowpath_common+0x7f/0xc0 [ 74.462997] [] ? rcu_note_context_switch+0xa0/0xa0 [ 74.470272] [] ? __unregister_ftrace_function+0xa2/0x1a0 [ 74.478117] [] warn_slowpath_null+0x1a/0x20 [ 74.484681] [] ftrace_ops_control_func+0xde/0xf0 [ 74.491760] [] ftrace_call+0x5/0x2f [ 74.497511] [] ? ftrace_call+0x5/0x2f [ 74.503486] [] ? ftrace_call+0x5/0x2f [ 74.509500] [] ? synchronize_sched+0x5/0x50 [ 74.516088] [] ? _cond_resched+0x5/0x40 [ 74.522268] [] ? synchronize_sched+0x5/0x50 [ 74.528837] [] ? __unregister_ftrace_function+0xa2/0x1a0 [ 74.536696] [] ? _cond_resched+0x5/0x40 [ 74.542878] [] ? mutex_lock+0x1d/0x50 [ 74.548869] [] unregister_ftrace_function+0x27/0x50 [ 74.556243] [] perf_ftrace_event_register+0x9f/0x140 [ 74.563709] [] ? _cond_resched+0x5/0x40 [ 74.569887] [] ? mutex_lock+0x1d/0x50 [ 74.575898] [] perf_trace_destroy+0x2e/0x50 [ 74.582505] [] tp_perf_event_destroy+0x9/0x10 [ 74.589298] [] free_event+0x70/0x1a0 [ 74.595208] [] perf_event_release_kernel+0x69/0xa0 [ 74.602460] [] ? _cond_resched+0x5/0x40 [ 74.608667] [] put_event+0x90/0xc0 [ 74.614373] [] perf_release+0x10/0x20 [ 74.620367] [] __fput+0xf4/0x280 [ 74.625894] [] ____fput+0xe/0x10 [ 74.631387] [] task_work_run+0xa7/0xe0 [ 74.637452] [] do_notify_resume+0x71/0xb0 [ 74.643843] [] int_signal+0x12/0x17 To fix this a new ftrace_ops flag is added that denotes the ftrace_list_end ftrace_ops stub as just that, a stub. This flag is now checked in the control loop and the function is not called if the flag is set. Thanks to Jovi for not just reporting the bug, but also pointing out where the bug was in the code. Link: http://lkml.kernel.org/r/514A8855.7090402@redhat.com Link: http://lkml.kernel.org/r/1364377499-1900-15-git-send-email-jovi.zhangwei@huawei.com Tested-by: WANG Chao Reported-by: WANG Chao Reported-by: zhangwei(Jovi) Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 2 ++ kernel/trace/ftrace.c | 5 +++-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index e5ca8ef50e9b..167abf907802 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -89,6 +89,7 @@ typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip, * that the call back has its own recursion protection. If it does * not set this, then the ftrace infrastructure will add recursion * protection for the caller. + * STUB - The ftrace_ops is just a place holder. */ enum { FTRACE_OPS_FL_ENABLED = 1 << 0, @@ -98,6 +99,7 @@ enum { FTRACE_OPS_FL_SAVE_REGS = 1 << 4, FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED = 1 << 5, FTRACE_OPS_FL_RECURSION_SAFE = 1 << 6, + FTRACE_OPS_FL_STUB = 1 << 7, }; struct ftrace_ops { diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index cc4943c7ce6d..7e897106b7e0 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -66,7 +66,7 @@ static struct ftrace_ops ftrace_list_end __read_mostly = { .func = ftrace_stub, - .flags = FTRACE_OPS_FL_RECURSION_SAFE, + .flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_STUB, }; /* ftrace_enabled is a method to turn ftrace on or off */ @@ -4131,7 +4131,8 @@ ftrace_ops_control_func(unsigned long ip, unsigned long parent_ip, preempt_disable_notrace(); trace_recursion_set(TRACE_CONTROL_BIT); do_for_each_ftrace_op(op, ftrace_control_list) { - if (!ftrace_function_local_disabled(op) && + if (!(op->flags & FTRACE_OPS_FL_STUB) && + !ftrace_function_local_disabled(op) && ftrace_ops_test(op, ip)) op->func(ip, parent_ip, op, regs); } while_for_each_ftrace_op(op); -- cgit v1.2.1 From c12f9ea28e9fbe7b1f4cefc953bee33298370683 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sun, 7 Apr 2013 20:47:18 +0100 Subject: Revert "tty/8250_pnp: serial port detection regression since v3.7" This reverts commit 77e372a3d82e5e4878ce1962207edd766773cc76. Checking for disabled resources board breaks detection pnp on another board "AMI UEFI implementation (Version: 0406 Release Date: 06/06/2012)". I'm working with the reporter of the original bug to write and test a better fix. https://bugzilla.redhat.com/show_bug.cgi?id=928246 Signed-off-by: Sean Young Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pnp.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index b3455a970a1d..35d9ab95c5cb 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -429,7 +429,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { struct uart_8250_port uart; int ret, line, flags = dev_id->driver_data; - struct resource *res = NULL; if (flags & UNKNOWN_DEV) { ret = serial_pnp_guess_board(dev); @@ -440,12 +439,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&uart, 0, sizeof(uart)); if (pnp_irq_valid(dev, 0)) uart.port.irq = pnp_irq(dev, 0); - if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) - res = pnp_get_resource(dev, IORESOURCE_IO, 2); - else if (pnp_port_valid(dev, 0)) - res = pnp_get_resource(dev, IORESOURCE_IO, 0); - if (pnp_resource_enabled(res)) { - uart.port.iobase = res->start; + if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) { + uart.port.iobase = pnp_port_start(dev, 2); + uart.port.iotype = UPIO_PORT; + } else if (pnp_port_valid(dev, 0)) { + uart.port.iobase = pnp_port_start(dev, 0); uart.port.iotype = UPIO_PORT; } else if (pnp_mem_valid(dev, 0)) { uart.port.mapbase = pnp_mem_start(dev, 0); -- cgit v1.2.1 From 1b581f173992cded311f810346378f763a1f1e5d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sun, 7 Apr 2013 23:46:47 +0400 Subject: tty: mxser: fix cycle termination condition in mxser_probe() and mxser_module_init() There is a bug in resources deallocation code in mxser_probe() and mxser_module_init(). As soon as variable 'i' is unsigned int, cycle termination condition i >= 0 is always true. The patch fixes the issue. Signed-off-by: Alexey Khoroshilov Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/mxser.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 484b6a3c9b03..302909ccf183 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -2643,9 +2643,9 @@ static int mxser_probe(struct pci_dev *pdev, mxvar_sdriver, brd->idx + i, &pdev->dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); - for (i--; i >= 0; i--) + for (; i > 0; i--) tty_unregister_device(mxvar_sdriver, - brd->idx + i); + brd->idx + i - 1); goto err_relbrd; } } @@ -2751,9 +2751,9 @@ static int __init mxser_module_init(void) tty_dev = tty_port_register_device(&brd->ports[i].port, mxvar_sdriver, brd->idx + i, NULL); if (IS_ERR(tty_dev)) { - for (i--; i >= 0; i--) + for (; i > 0; i--) tty_unregister_device(mxvar_sdriver, - brd->idx + i); + brd->idx + i - 1); for (i = 0; i < brd->info->nports; i++) tty_port_destroy(&brd->ports[i].port); free_irq(brd->irq, brd); -- cgit v1.2.1 From ec376a2ab97ec3be52ca282dc6ac102e805d1005 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Thu, 4 Apr 2013 10:35:35 -0700 Subject: cpufreq / intel_pstate: Set timer timeout correctly The current calculation of the delay time is wrong and a cut and paste error from a previous experimental driver. This can result in the timeout being set to jiffies + 1 which setup the driver to race with itself if the APIC timer interrupt happens at just the right time. References: https://bugzilla.redhat.com/show_bug.cgi?id=920289 Reported-by: Adam Williamson Reported-and-tested-by: Parag Warudkar Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index ad72922919ed..6133ef5cf671 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -502,7 +502,6 @@ static inline void intel_pstate_set_sample_time(struct cpudata *cpu) sample_time = cpu->pstate_policy->sample_rate_ms; delay = msecs_to_jiffies(sample_time); - delay -= jiffies % delay; mod_timer_pinned(&cpu->timer, jiffies + delay); } -- cgit v1.2.1 From 6f389a8f1dd22a24f3d9afc2812b30d639e94625 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Sun, 7 Apr 2013 02:14:14 +0000 Subject: PM / reboot: call syscore_shutdown() after disable_nonboot_cpus() As commit 40dc166c (PM / Core: Introduce struct syscore_ops for core subsystems PM) say, syscore_ops operations should be carried with one CPU on-line and interrupts disabled. However, after commit f96972f2d (kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()), syscore_shutdown() is called before disable_nonboot_cpus(), so break the rules. We have a MIPS machine with a 8259A PIC, and there is an external timer (HPET) linked at 8259A. Since 8259A has been shutdown too early (by syscore_shutdown()), disable_nonboot_cpus() runs without timer interrupt, so it hangs and reboot fails. This patch call syscore_shutdown() a little later (after disable_nonboot_cpus()) to avoid reboot failure, this is the same way as poweroff does. For consistency, add disable_nonboot_cpus() to kernel_halt(). Signed-off-by: Huacai Chen Cc: Signed-off-by: Rafael J. Wysocki --- kernel/sys.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sys.c b/kernel/sys.c index 39c9c4a2949f..0da73cf73e60 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -324,7 +324,6 @@ void kernel_restart_prepare(char *cmd) system_state = SYSTEM_RESTART; usermodehelper_disable(); device_shutdown(); - syscore_shutdown(); } /** @@ -370,6 +369,7 @@ void kernel_restart(char *cmd) { kernel_restart_prepare(cmd); disable_nonboot_cpus(); + syscore_shutdown(); if (!cmd) printk(KERN_EMERG "Restarting system.\n"); else @@ -395,6 +395,7 @@ static void kernel_shutdown_prepare(enum system_states state) void kernel_halt(void) { kernel_shutdown_prepare(SYSTEM_HALT); + disable_nonboot_cpus(); syscore_shutdown(); printk(KERN_EMERG "System halted.\n"); kmsg_dump(KMSG_DUMP_HALT); -- cgit v1.2.1 From ffcdedb667b6db8ee31c7efa76a3ec59d9c3b0fc Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 6 Apr 2013 00:54:37 +0000 Subject: Revert "bonding: remove sysfs before removing devices" This reverts commit 4de79c737b200492195ebc54a887075327e1ec1d. This patch introduces a new bug which causes access to freed memory. In bond_uninit: list_del(&bond->bond_list); bond_list is linked in bond_net's dev_list which is freed by unregister_pernet_subsys. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 171b10f167a5..a51241b2e621 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4902,8 +4902,8 @@ static void __exit bonding_exit(void) bond_destroy_debugfs(); - unregister_pernet_subsys(&bond_net_ops); rtnl_link_unregister(&bond_link_ops); + unregister_pernet_subsys(&bond_net_ops); #ifdef CONFIG_NET_POLL_CONTROLLER /* -- cgit v1.2.1 From 69b0216ac255f523556fa3d4ff030d857eaaa37f Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 6 Apr 2013 00:54:38 +0000 Subject: bonding: fix bonding_masters race condition in bond unloading While the bonding module is unloading, it is considered that after rtnl_link_unregister all bond devices are destroyed but since no synchronization mechanism exists, a new bond device can be created via bonding_masters before unregister_pernet_subsys which would lead to multiple problems (e.g. NULL pointer dereference, wrong RIP, list corruption). This patch fixes the issue by removing any bond devices left in the netns after bonding_masters is removed from sysfs. Signed-off-by: Nikolay Aleksandrov Acked-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a51241b2e621..07401a3e256b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4846,9 +4846,18 @@ static int __net_init bond_net_init(struct net *net) static void __net_exit bond_net_exit(struct net *net) { struct bond_net *bn = net_generic(net, bond_net_id); + struct bonding *bond, *tmp_bond; + LIST_HEAD(list); bond_destroy_sysfs(bn); bond_destroy_proc_dir(bn); + + /* Kill off any bonds created after unregistering bond rtnl ops */ + rtnl_lock(); + list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list) + unregister_netdevice_queue(bond->dev, &list); + unregister_netdevice_many(&list); + rtnl_unlock(); } static struct pernet_operations bond_net_ops = { -- cgit v1.2.1 From 4f7f46d32c9875004fae1d57ae3c02cc2e6cd6a3 Mon Sep 17 00:00:00 2001 From: Asias He Date: Wed, 3 Apr 2013 14:17:37 +0800 Subject: tcm_vhost: Use vq->private_data to indicate if the endpoint is setup Currently, vs->vs_endpoint is used indicate if the endpoint is setup or not. It is set or cleared in vhost_scsi_set_endpoint() or vhost_scsi_clear_endpoint() under the vs->dev.mutex lock. However, when we check it in vhost_scsi_handle_vq(), we ignored the lock. Instead of using the vs->vs_endpoint and the vs->dev.mutex lock to indicate the status of the endpoint, we use per virtqueue vq->private_data to indicate it. In this way, we can only take the vq->mutex lock which is per queue and make the concurrent multiqueue process having less lock contention. Further, in the read side of vq->private_data, we can even do not take the lock if it is accessed in the vhost worker thread, because it is protected by "vhost rcu". (nab: Do s/VHOST_FEATURES/~VHOST_SCSI_FEATURES) Signed-off-by: Asias He Acked-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 144 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 101 insertions(+), 43 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index dd9614eb2577..6cda137bb208 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -74,9 +74,8 @@ enum { struct vhost_scsi { /* Protected by vhost_scsi->dev.mutex */ - struct tcm_vhost_tpg *vs_tpg[VHOST_SCSI_MAX_TARGET]; + struct tcm_vhost_tpg **vs_tpg; char vs_vhost_wwpn[TRANSPORT_IQN_LEN]; - bool vs_endpoint; struct vhost_dev dev; struct vhost_virtqueue vqs[VHOST_SCSI_MAX_VQ]; @@ -582,6 +581,7 @@ static void tcm_vhost_submission_work(struct work_struct *work) static void vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq) { + struct tcm_vhost_tpg **vs_tpg; struct virtio_scsi_cmd_req v_req; struct tcm_vhost_tpg *tv_tpg; struct tcm_vhost_cmd *tv_cmd; @@ -590,8 +590,16 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, int head, ret; u8 target; - /* Must use ioctl VHOST_SCSI_SET_ENDPOINT */ - if (unlikely(!vs->vs_endpoint)) + /* + * We can handle the vq only after the endpoint is setup by calling the + * VHOST_SCSI_SET_ENDPOINT ioctl. + * + * TODO: Check that we are running from vhost_worker which acts + * as read-side critical section for vhost kind of RCU. + * See the comments in struct vhost_virtqueue in drivers/vhost/vhost.h + */ + vs_tpg = rcu_dereference_check(vq->private_data, 1); + if (!vs_tpg) return; mutex_lock(&vq->mutex); @@ -661,7 +669,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, /* Extract the tpgt */ target = v_req.lun[1]; - tv_tpg = ACCESS_ONCE(vs->vs_tpg[target]); + tv_tpg = ACCESS_ONCE(vs_tpg[target]); /* Target does not exist, fail the request */ if (unlikely(!tv_tpg)) { @@ -780,6 +788,20 @@ static void vhost_scsi_handle_kick(struct vhost_work *work) vhost_scsi_handle_vq(vs, vq); } +static void vhost_scsi_flush_vq(struct vhost_scsi *vs, int index) +{ + vhost_poll_flush(&vs->dev.vqs[index].poll); +} + +static void vhost_scsi_flush(struct vhost_scsi *vs) +{ + int i; + + for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) + vhost_scsi_flush_vq(vs, i); + vhost_work_flush(&vs->dev, &vs->vs_completion_work); +} + /* * Called from vhost_scsi_ioctl() context to walk the list of available * tcm_vhost_tpg with an active struct tcm_vhost_nexus @@ -790,8 +812,10 @@ static int vhost_scsi_set_endpoint( { struct tcm_vhost_tport *tv_tport; struct tcm_vhost_tpg *tv_tpg; + struct tcm_vhost_tpg **vs_tpg; + struct vhost_virtqueue *vq; + int index, ret, i, len; bool match = false; - int index, ret; mutex_lock(&vs->dev.mutex); /* Verify that ring has been setup correctly. */ @@ -803,6 +827,15 @@ static int vhost_scsi_set_endpoint( } } + len = sizeof(vs_tpg[0]) * VHOST_SCSI_MAX_TARGET; + vs_tpg = kzalloc(len, GFP_KERNEL); + if (!vs_tpg) { + mutex_unlock(&vs->dev.mutex); + return -ENOMEM; + } + if (vs->vs_tpg) + memcpy(vs_tpg, vs->vs_tpg, len); + mutex_lock(&tcm_vhost_mutex); list_for_each_entry(tv_tpg, &tcm_vhost_list, tv_tpg_list) { mutex_lock(&tv_tpg->tv_tpg_mutex); @@ -817,14 +850,15 @@ static int vhost_scsi_set_endpoint( tv_tport = tv_tpg->tport; if (!strcmp(tv_tport->tport_name, t->vhost_wwpn)) { - if (vs->vs_tpg[tv_tpg->tport_tpgt]) { + if (vs->vs_tpg && vs->vs_tpg[tv_tpg->tport_tpgt]) { mutex_unlock(&tv_tpg->tv_tpg_mutex); mutex_unlock(&tcm_vhost_mutex); mutex_unlock(&vs->dev.mutex); + kfree(vs_tpg); return -EEXIST; } tv_tpg->tv_tpg_vhost_count++; - vs->vs_tpg[tv_tpg->tport_tpgt] = tv_tpg; + vs_tpg[tv_tpg->tport_tpgt] = tv_tpg; smp_mb__after_atomic_inc(); match = true; } @@ -835,12 +869,26 @@ static int vhost_scsi_set_endpoint( if (match) { memcpy(vs->vs_vhost_wwpn, t->vhost_wwpn, sizeof(vs->vs_vhost_wwpn)); - vs->vs_endpoint = true; + for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) { + vq = &vs->vqs[i]; + /* Flushing the vhost_work acts as synchronize_rcu */ + mutex_lock(&vq->mutex); + rcu_assign_pointer(vq->private_data, vs_tpg); + mutex_unlock(&vq->mutex); + } ret = 0; } else { ret = -EEXIST; } + /* + * Act as synchronize_rcu to make sure access to + * old vs->vs_tpg is finished. + */ + vhost_scsi_flush(vs); + kfree(vs->vs_tpg); + vs->vs_tpg = vs_tpg; + mutex_unlock(&vs->dev.mutex); return ret; } @@ -851,6 +899,8 @@ static int vhost_scsi_clear_endpoint( { struct tcm_vhost_tport *tv_tport; struct tcm_vhost_tpg *tv_tpg; + struct vhost_virtqueue *vq; + bool match = false; int index, ret, i; u8 target; @@ -862,9 +912,14 @@ static int vhost_scsi_clear_endpoint( goto err_dev; } } + + if (!vs->vs_tpg) { + mutex_unlock(&vs->dev.mutex); + return 0; + } + for (i = 0; i < VHOST_SCSI_MAX_TARGET; i++) { target = i; - tv_tpg = vs->vs_tpg[target]; if (!tv_tpg) continue; @@ -886,10 +941,27 @@ static int vhost_scsi_clear_endpoint( } tv_tpg->tv_tpg_vhost_count--; vs->vs_tpg[target] = NULL; - vs->vs_endpoint = false; + match = true; mutex_unlock(&tv_tpg->tv_tpg_mutex); } + if (match) { + for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) { + vq = &vs->vqs[i]; + /* Flushing the vhost_work acts as synchronize_rcu */ + mutex_lock(&vq->mutex); + rcu_assign_pointer(vq->private_data, NULL); + mutex_unlock(&vq->mutex); + } + } + /* + * Act as synchronize_rcu to make sure access to + * old vs->vs_tpg is finished. + */ + vhost_scsi_flush(vs); + kfree(vs->vs_tpg); + vs->vs_tpg = NULL; mutex_unlock(&vs->dev.mutex); + return 0; err_tpg: @@ -899,6 +971,24 @@ err_dev: return ret; } +static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) +{ + if (features & ~VHOST_SCSI_FEATURES) + return -EOPNOTSUPP; + + mutex_lock(&vs->dev.mutex); + if ((features & (1 << VHOST_F_LOG_ALL)) && + !vhost_log_access_ok(&vs->dev)) { + mutex_unlock(&vs->dev.mutex); + return -EFAULT; + } + vs->dev.acked_features = features; + smp_wmb(); + vhost_scsi_flush(vs); + mutex_unlock(&vs->dev.mutex); + return 0; +} + static int vhost_scsi_open(struct inode *inode, struct file *f) { struct vhost_scsi *s; @@ -939,38 +1029,6 @@ static int vhost_scsi_release(struct inode *inode, struct file *f) return 0; } -static void vhost_scsi_flush_vq(struct vhost_scsi *vs, int index) -{ - vhost_poll_flush(&vs->dev.vqs[index].poll); -} - -static void vhost_scsi_flush(struct vhost_scsi *vs) -{ - int i; - - for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) - vhost_scsi_flush_vq(vs, i); - vhost_work_flush(&vs->dev, &vs->vs_completion_work); -} - -static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) -{ - if (features & ~VHOST_SCSI_FEATURES) - return -EOPNOTSUPP; - - mutex_lock(&vs->dev.mutex); - if ((features & (1 << VHOST_F_LOG_ALL)) && - !vhost_log_access_ok(&vs->dev)) { - mutex_unlock(&vs->dev.mutex); - return -EFAULT; - } - vs->dev.acked_features = features; - smp_wmb(); - vhost_scsi_flush(vs); - mutex_unlock(&vs->dev.mutex); - return 0; -} - static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, unsigned long arg) { -- cgit v1.2.1 From dfd5d5692c7ddf27380511b80a3dc590acfc4eee Mon Sep 17 00:00:00 2001 From: Asias He Date: Wed, 3 Apr 2013 14:17:38 +0800 Subject: tcm_vhost: Initialize vq->last_used_idx when set endpoint This patch fixes guest hang when booting seabios and guest. [ 0.576238] scsi0 : Virtio SCSI HBA [ 0.616754] virtio_scsi virtio1: request:id 0 is not a head! vq->last_used_idx is initialized only when /dev/vhost-scsi is opened or closed. vhost_scsi_open -> vhost_dev_init() -> vhost_vq_reset() vhost_scsi_release() -> vhost_dev_cleanup -> vhost_vq_reset() So, when guest talks to tcm_vhost after seabios does, vq->last_used_idx still contains the old valule for seabios. This confuses guest. Fix this by calling vhost_init_used() to init vq->last_used_idx when we set endpoint. Signed-off-by: Asias He Acked-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 6cda137bb208..c127731b4230 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -874,6 +874,7 @@ static int vhost_scsi_set_endpoint( /* Flushing the vhost_work acts as synchronize_rcu */ mutex_lock(&vq->mutex); rcu_assign_pointer(vq->private_data, vs_tpg); + vhost_init_used(vq); mutex_unlock(&vq->mutex); } ret = 0; -- cgit v1.2.1 From 88c5b5ce5cb57af6ca2a7cf4d5715fa320448ff9 Mon Sep 17 00:00:00 2001 From: Michael Riesch Date: Mon, 8 Apr 2013 05:45:26 +0000 Subject: rtnetlink: Call nlmsg_parse() with correct header length Signed-off-by: Michael Riesch Cc: "David S. Miller" Cc: Greg Kroah-Hartman Cc: Jiri Benc Cc: "Theodore Ts'o" Cc: linux-kernel@vger.kernel.org Acked-by: Mark Rustad Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index b65441da74ab..23854b51a259 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1072,7 +1072,7 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); cb->seq = net->dev_base_seq; - if (nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, + if (nlmsg_parse(cb->nlh, sizeof(struct ifinfomsg), tb, IFLA_MAX, ifla_policy) >= 0) { if (tb[IFLA_EXT_MASK]) @@ -1922,7 +1922,7 @@ static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh) u32 ext_filter_mask = 0; u16 min_ifinfo_dump_size = 0; - if (nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, + if (nlmsg_parse(nlh, sizeof(struct ifinfomsg), tb, IFLA_MAX, ifla_policy) >= 0) { if (tb[IFLA_EXT_MASK]) ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); -- cgit v1.2.1 From f9c41a62bba3f3f7ef3541b2a025e3371bcbba97 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Sun, 7 Apr 2013 22:19:26 +0000 Subject: af_iucv: fix recvmsg by replacing skb_pull() function When receiving data messages, the "BUG_ON(skb->len < skb->data_len)" in the skb_pull() function triggers a kernel panic. Replace the skb_pull logic by a per skb offset as advised by Eric Dumazet. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Reviewed-by: Hendrik Brueckner Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/iucv/af_iucv.h | 8 ++++++++ net/iucv/af_iucv.c | 34 ++++++++++++++++------------------ 2 files changed, 24 insertions(+), 18 deletions(-) diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h index cc7c19732389..714cc9a54a4c 100644 --- a/include/net/iucv/af_iucv.h +++ b/include/net/iucv/af_iucv.h @@ -130,6 +130,14 @@ struct iucv_sock { enum iucv_tx_notify n); }; +struct iucv_skb_cb { + u32 class; /* target class of message */ + u32 tag; /* tag associated with message */ + u32 offset; /* offset for skb receival */ +}; + +#define IUCV_SKB_CB(__skb) ((struct iucv_skb_cb *)&((__skb)->cb[0])) + /* iucv socket options (SOL_IUCV) */ #define SO_IPRMDATA_MSG 0x0080 /* send/recv IPRM_DATA msgs */ #define SO_MSGLIMIT 0x1000 /* get/set IUCV MSGLIMIT */ diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index bf6935820001..206ce6db2c36 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -49,12 +49,6 @@ static const u8 iprm_shutdown[8] = #define TRGCLS_SIZE (sizeof(((struct iucv_message *)0)->class)) -/* macros to set/get socket control buffer at correct offset */ -#define CB_TAG(skb) ((skb)->cb) /* iucv message tag */ -#define CB_TAG_LEN (sizeof(((struct iucv_message *) 0)->tag)) -#define CB_TRGCLS(skb) ((skb)->cb + CB_TAG_LEN) /* iucv msg target class */ -#define CB_TRGCLS_LEN (TRGCLS_SIZE) - #define __iucv_sock_wait(sk, condition, timeo, ret) \ do { \ DEFINE_WAIT(__wait); \ @@ -1141,7 +1135,7 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock, /* increment and save iucv message tag for msg_completion cbk */ txmsg.tag = iucv->send_tag++; - memcpy(CB_TAG(skb), &txmsg.tag, CB_TAG_LEN); + IUCV_SKB_CB(skb)->tag = txmsg.tag; if (iucv->transport == AF_IUCV_TRANS_HIPER) { atomic_inc(&iucv->msg_sent); @@ -1224,7 +1218,7 @@ static int iucv_fragment_skb(struct sock *sk, struct sk_buff *skb, int len) return -ENOMEM; /* copy target class to control buffer of new skb */ - memcpy(CB_TRGCLS(nskb), CB_TRGCLS(skb), CB_TRGCLS_LEN); + IUCV_SKB_CB(nskb)->class = IUCV_SKB_CB(skb)->class; /* copy data fragment */ memcpy(nskb->data, skb->data + copied, size); @@ -1256,7 +1250,7 @@ static void iucv_process_message(struct sock *sk, struct sk_buff *skb, /* store msg target class in the second 4 bytes of skb ctrl buffer */ /* Note: the first 4 bytes are reserved for msg tag */ - memcpy(CB_TRGCLS(skb), &msg->class, CB_TRGCLS_LEN); + IUCV_SKB_CB(skb)->class = msg->class; /* check for special IPRM messages (e.g. iucv_sock_shutdown) */ if ((msg->flags & IUCV_IPRMDATA) && len > 7) { @@ -1292,6 +1286,7 @@ static void iucv_process_message(struct sock *sk, struct sk_buff *skb, } } + IUCV_SKB_CB(skb)->offset = 0; if (sock_queue_rcv_skb(sk, skb)) skb_queue_head(&iucv_sk(sk)->backlog_skb_q, skb); } @@ -1327,6 +1322,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, unsigned int copied, rlen; struct sk_buff *skb, *rskb, *cskb; int err = 0; + u32 offset; msg->msg_namelen = 0; @@ -1348,13 +1344,14 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, return err; } - rlen = skb->len; /* real length of skb */ + offset = IUCV_SKB_CB(skb)->offset; + rlen = skb->len - offset; /* real length of skb */ copied = min_t(unsigned int, rlen, len); if (!rlen) sk->sk_shutdown = sk->sk_shutdown | RCV_SHUTDOWN; cskb = skb; - if (skb_copy_datagram_iovec(cskb, 0, msg->msg_iov, copied)) { + if (skb_copy_datagram_iovec(cskb, offset, msg->msg_iov, copied)) { if (!(flags & MSG_PEEK)) skb_queue_head(&sk->sk_receive_queue, skb); return -EFAULT; @@ -1372,7 +1369,8 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, * get the trgcls from the control buffer of the skb due to * fragmentation of original iucv message. */ err = put_cmsg(msg, SOL_IUCV, SCM_IUCV_TRGCLS, - CB_TRGCLS_LEN, CB_TRGCLS(skb)); + sizeof(IUCV_SKB_CB(skb)->class), + (void *)&IUCV_SKB_CB(skb)->class); if (err) { if (!(flags & MSG_PEEK)) skb_queue_head(&sk->sk_receive_queue, skb); @@ -1384,9 +1382,8 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, /* SOCK_STREAM: re-queue skb if it contains unreceived data */ if (sk->sk_type == SOCK_STREAM) { - skb_pull(skb, copied); - if (skb->len) { - skb_queue_head(&sk->sk_receive_queue, skb); + if (copied < rlen) { + IUCV_SKB_CB(skb)->offset = offset + copied; goto done; } } @@ -1405,6 +1402,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, spin_lock_bh(&iucv->message_q.lock); rskb = skb_dequeue(&iucv->backlog_skb_q); while (rskb) { + IUCV_SKB_CB(rskb)->offset = 0; if (sock_queue_rcv_skb(sk, rskb)) { skb_queue_head(&iucv->backlog_skb_q, rskb); @@ -1832,7 +1830,7 @@ static void iucv_callback_txdone(struct iucv_path *path, spin_lock_irqsave(&list->lock, flags); while (list_skb != (struct sk_buff *)list) { - if (!memcmp(&msg->tag, CB_TAG(list_skb), CB_TAG_LEN)) { + if (msg->tag != IUCV_SKB_CB(list_skb)->tag) { this = list_skb; break; } @@ -2093,6 +2091,7 @@ static int afiucv_hs_callback_rx(struct sock *sk, struct sk_buff *skb) skb_pull(skb, sizeof(struct af_iucv_trans_hdr)); skb_reset_transport_header(skb); skb_reset_network_header(skb); + IUCV_SKB_CB(skb)->offset = 0; spin_lock(&iucv->message_q.lock); if (skb_queue_empty(&iucv->backlog_skb_q)) { if (sock_queue_rcv_skb(sk, skb)) { @@ -2197,8 +2196,7 @@ static int afiucv_hs_rcv(struct sk_buff *skb, struct net_device *dev, /* fall through and receive zero length data */ case 0: /* plain data frame */ - memcpy(CB_TRGCLS(skb), &trans_hdr->iucv_hdr.class, - CB_TRGCLS_LEN); + IUCV_SKB_CB(skb)->class = trans_hdr->iucv_hdr.class; err = afiucv_hs_callback_rx(sk, skb); break; default: -- cgit v1.2.1 From 65d8013cbdc661f9cb7645148de1facfe3d0c88a Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Sun, 7 Apr 2013 22:19:27 +0000 Subject: qeth: fix qeth_wait_for_threads() deadlock for OSN devices Any recovery thread will deadlock when calling qeth_wait_for_threads(), most notably when triggering a recovery on an OSN device. This patch will store the recovery thread's task pointer on recovery invocation and check in qeth_wait_for_threads() respectively to avoid deadlocks. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 3 +++ drivers/s390/net/qeth_core_main.c | 19 +++++++++++++++++++ drivers/s390/net/qeth_l2_main.c | 2 ++ drivers/s390/net/qeth_l3_main.c | 2 ++ 4 files changed, 26 insertions(+) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 8c0622399fcd..6ccb7457746b 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -769,6 +769,7 @@ struct qeth_card { unsigned long thread_start_mask; unsigned long thread_allowed_mask; unsigned long thread_running_mask; + struct task_struct *recovery_task; spinlock_t ip_lock; struct list_head ip_list; struct list_head *ip_tbd_list; @@ -862,6 +863,8 @@ extern struct qeth_card_list_struct qeth_core_card_list; extern struct kmem_cache *qeth_core_header_cache; extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS]; +void qeth_set_recovery_task(struct qeth_card *); +void qeth_clear_recovery_task(struct qeth_card *); void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int); int qeth_threads_running(struct qeth_card *, unsigned long); int qeth_wait_for_threads(struct qeth_card *, unsigned long); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 0d73a999983d..451f92020599 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -177,6 +177,23 @@ const char *qeth_get_cardname_short(struct qeth_card *card) return "n/a"; } +void qeth_set_recovery_task(struct qeth_card *card) +{ + card->recovery_task = current; +} +EXPORT_SYMBOL_GPL(qeth_set_recovery_task); + +void qeth_clear_recovery_task(struct qeth_card *card) +{ + card->recovery_task = NULL; +} +EXPORT_SYMBOL_GPL(qeth_clear_recovery_task); + +static bool qeth_is_recovery_task(const struct qeth_card *card) +{ + return card->recovery_task == current; +} + void qeth_set_allowed_threads(struct qeth_card *card, unsigned long threads, int clear_start_mask) { @@ -205,6 +222,8 @@ EXPORT_SYMBOL_GPL(qeth_threads_running); int qeth_wait_for_threads(struct qeth_card *card, unsigned long threads) { + if (qeth_is_recovery_task(card)) + return 0; return wait_event_interruptible(card->wait_q, qeth_threads_running(card, threads) == 0); } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index d690166efeaf..155b101bd730 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1143,6 +1143,7 @@ static int qeth_l2_recover(void *ptr) QETH_CARD_TEXT(card, 2, "recover2"); dev_warn(&card->gdev->dev, "A recovery process has been started for the device\n"); + qeth_set_recovery_task(card); __qeth_l2_set_offline(card->gdev, 1); rc = __qeth_l2_set_online(card->gdev, 1); if (!rc) @@ -1153,6 +1154,7 @@ static int qeth_l2_recover(void *ptr) dev_warn(&card->gdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); } + qeth_clear_recovery_task(card); qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); return 0; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 8710337dab3e..1f7edf1b26c3 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3515,6 +3515,7 @@ static int qeth_l3_recover(void *ptr) QETH_CARD_TEXT(card, 2, "recover2"); dev_warn(&card->gdev->dev, "A recovery process has been started for the device\n"); + qeth_set_recovery_task(card); __qeth_l3_set_offline(card->gdev, 1); rc = __qeth_l3_set_online(card->gdev, 1); if (!rc) @@ -3525,6 +3526,7 @@ static int qeth_l3_recover(void *ptr) dev_warn(&card->gdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); } + qeth_clear_recovery_task(card); qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); return 0; -- cgit v1.2.1 From 79e5f05edcbf85825d19eb8a425cd6c36c6c66f1 Mon Sep 17 00:00:00 2001 From: Christian Ruppert Date: Mon, 8 Apr 2013 13:05:30 +0530 Subject: ARC: Add implicit compiler barrier to raw_local_irq* functions ARC irqsave/restore macros were missing the compiler barrier, causing a stale load in irq-enabled region be used in irq-safe region, despite being changed, because the register holding the value was still live. The problem manifested as random crashes in timer code when stress testing ARCLinux (3.9-rc3) on a !SMP && !PREEMPT_COUNT Here's the exact sequence which caused this: (0). tv1[x] <----> t1 <---> t2 (1). mod_timer(t1) interrupted after it calls timer_pending() (2). mod_timer(t2) completes (3). mod_timer(t1) resumes but messes up the list (4). __runt_timers( ) uses bogus timer_list entry / crashes in timer->function Essentially mod_timer() was racing against itself and while the spinlock serialized the tv1[] timer link list, timer_pending() called outside the spinlock, cached timer link list element in a register. With low register pressure (and a deep register file), lack of barrier in raw_local_irqsave() as well as preempt_disable (!PREEMPT_COUNT version), there was nothing to force gcc to reload across the spinlock, causing a stale value in reg be used for link list manipulation - ensuing a corruption. ARcompact disassembly which shows the culprit generated code: mod_timer: push_s blink mov_s r13,r0 # timer, timer .. ###### timer_pending( ) ld_s r3,[r13] # <------ .entry.next LOADED brne r3, 0, @.L163 .L163: .. ###### spin_lock_irq( ) lr r5, [status32] # flags bic r4, r5, 6 # temp, flags, and.f 0, r5, 6 # flags, flag.nz r4 ###### detach_if_pending( ) begins tst_s r3,r3 <-------------- # timer_pending( ) checks timer->entry.next # r3 is NOT reloaded by gcc, using stale value beq.d @.L169 mov.eq r0,0 ##### detach_timer( ): __list_del( ) ld r4,[r13,4] # .entry.prev, D.31439 st r4,[r3,4] # .prev, D.31439 st r3,[r4] # .next, D.30246 We initially tried to fix this by adding barrier() to preempt_* macros for !PREEMPT_COUNT but Linus clarified that it was anything but wrong. http://www.spinics.net/lists/kernel/msg1512709.html [vgupta: updated commitlog] Reported-by/Signed-off-by: Christian Ruppert Cc: Christian Ruppert Cc: Pierrick Hascoet Debugged-by/Signed-off-by: Vineet Gupta Signed-off-by: Linus Torvalds --- arch/arc/include/asm/irqflags.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h index ccd84806b62f..eac071668201 100644 --- a/arch/arc/include/asm/irqflags.h +++ b/arch/arc/include/asm/irqflags.h @@ -39,7 +39,7 @@ static inline long arch_local_irq_save(void) " flag.nz %0 \n" : "=r"(temp), "=r"(flags) : "n"((STATUS_E1_MASK | STATUS_E2_MASK)) - : "cc"); + : "memory", "cc"); return flags; } @@ -53,7 +53,8 @@ static inline void arch_local_irq_restore(unsigned long flags) __asm__ __volatile__( " flag %0 \n" : - : "r"(flags)); + : "r"(flags) + : "memory"); } /* @@ -73,7 +74,8 @@ static inline void arch_local_irq_disable(void) " and %0, %0, %1 \n" " flag %0 \n" : "=&r"(temp) - : "n"(~(STATUS_E1_MASK | STATUS_E2_MASK))); + : "n"(~(STATUS_E1_MASK | STATUS_E2_MASK)) + : "memory"); } /* @@ -85,7 +87,9 @@ static inline long arch_local_save_flags(void) __asm__ __volatile__( " lr %0, [status32] \n" - : "=&r"(temp)); + : "=&r"(temp) + : + : "memory"); return temp; } -- cgit v1.2.1 From b1ea3e6e3883c5191caa5be72b3a5b9c32812e38 Mon Sep 17 00:00:00 2001 From: Calvin Owens Date: Sun, 7 Apr 2013 21:01:19 -0500 Subject: drm/nouveau: fix unconditional return waiting on memory Typo in nv50_display_flip_wait allows page flipping to run ahead before memory has time to settle. Signed-off-by: Calvin Owens Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 7f0e6c3f37d1..1ddc03e51bf4 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -479,7 +479,7 @@ nv50_display_flip_wait(void *data) { struct nv50_display_flip *flip = data; if (nouveau_bo_rd32(flip->disp->sync, flip->chan->addr / 4) == - flip->chan->data); + flip->chan->data) return true; usleep_range(1, 2); return false; -- cgit v1.2.1 From c802d759623acbd6e1ee9fbdabae89159a513913 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 9 Apr 2013 10:07:19 +0800 Subject: netrom: fix invalid use of sizeof in nr_recvmsg() sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Introduced by commit 3ce5ef(netrom: fix info leak via msg_name in nr_recvmsg) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/netrom/af_netrom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 7fcb307dea47..103bd704b5fc 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1173,7 +1173,7 @@ static int nr_recvmsg(struct kiocb *iocb, struct socket *sock, } if (sax != NULL) { - memset(sax, 0, sizeof(sax)); + memset(sax, 0, sizeof(*sax)); sax->sax25_family = AF_NETROM; skb_copy_from_linear_data_offset(skb, 7, sax->sax25_call.ax25_call, AX25_ADDR_LEN); -- cgit v1.2.1 From b2dfaa8d33cee9dd4ed78979f5d70063df546101 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 8 Apr 2013 14:21:31 +1000 Subject: m68k: define a local gpio_request_one() function Compiling for linux-3.9-rc1 and later fails with: drivers/gpio/devres.c: In function 'devm_gpio_request_one': drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration] So provide a local gpio_request_one() function. Code largely borrowed from blackfin's local gpio_request_one() function. Signed-off-by: Greg Ungerer Acked-by: Linus Walleij --- arch/m68k/include/asm/gpio.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index 4395ffc51fdb..8cc83431805b 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -86,4 +86,24 @@ static inline int gpio_cansleep(unsigned gpio) return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio); } +static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) +{ + int err; + + err = gpio_request(gpio, label); + if (err) + return err; + + if (flags & GPIOF_DIR_IN) + err = gpio_direction_input(gpio); + else + err = gpio_direction_output(gpio, + (flags & GPIOF_INIT_HIGH) ? 1 : 0); + + if (err) + gpio_free(gpio); + + return err; +} + #endif -- cgit v1.2.1 From 3480a2125923e4b7a56d79efc76743089bf273fc Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 9 Apr 2013 14:16:04 +0800 Subject: can: gw: use kmem_cache_free() instead of kfree() Memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Cc: linux-stable # >= v3.2 Signed-off-by: Wei Yongjun Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- net/can/gw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/can/gw.c b/net/can/gw.c index 2d117dc5ebea..117814a7e73c 100644 --- a/net/can/gw.c +++ b/net/can/gw.c @@ -466,7 +466,7 @@ static int cgw_notifier(struct notifier_block *nb, if (gwj->src.dev == dev || gwj->dst.dev == dev) { hlist_del(&gwj->list); cgw_unregister_filter(gwj); - kfree(gwj); + kmem_cache_free(cgw_cache, gwj); } } } @@ -864,7 +864,7 @@ static void cgw_remove_all_jobs(void) hlist_for_each_entry_safe(gwj, nx, &cgw_list, list) { hlist_del(&gwj->list); cgw_unregister_filter(gwj); - kfree(gwj); + kmem_cache_free(cgw_cache, gwj); } } @@ -920,7 +920,7 @@ static int cgw_remove_job(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) hlist_del(&gwj->list); cgw_unregister_filter(gwj); - kfree(gwj); + kmem_cache_free(cgw_cache, gwj); err = 0; break; } -- cgit v1.2.1 From cab1e0a36c9dd0b0671fb84197ed294513f5adc1 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 29 Mar 2013 16:20:09 +0100 Subject: ARM: clk-imx35: Bugfix iomux clock This patch enables iomuxc_gate clock. It is necessary to be able to reconfigure iomux pads. Without this clock enabled, the clk_disable_unused function will disable this clock and the iomux pads are not configurable anymore. This happens at every boot. After a reboot (watchdog system reset) the clock is not enabled again, so all iomux pad reconfigurations in boot code are without effect. The iomux pads should be always configurable, so this patch always enables it. Signed-off-by: Markus Pargmann Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx35.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index e13a8fa5e62c..b95898a3912c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -265,6 +265,7 @@ int __init mx35_clocks_init(void) clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); clk_prepare_enable(clk[max_gate]); + clk_prepare_enable(clk[iomuxc_gate]); /* * SCC is needed to boot via mmc after a watchdog reset. The clock code -- cgit v1.2.1 From 75498083e25e96932ad998ffdeadb17234c68d3a Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 29 Mar 2013 16:20:10 +0100 Subject: ARM: imx35 Bugfix admux clock The admux clock seems to be the audmux clock as tests show. audmux does not work without this clock enabled. Currently imx35 does not register a clock device for audmux. This patch adds this registration. imx-audmux driver already handles a clock device, so no changes are necessary there. Signed-off-by: Markus Pargmann Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx35.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index b95898a3912c..2193c834f55c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -257,6 +257,7 @@ int __init mx35_clocks_init(void) clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); + clk_register_clkdev(clk[admux_gate], "audmux", NULL); clk_prepare_enable(clk[spba_gate]); clk_prepare_enable(clk[gpio1_gate]); -- cgit v1.2.1 From 2bb4b70b1dbb45f0c1a3ba98066e6635d8aa3fe0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 3 Apr 2013 23:50:09 +0800 Subject: ARM: imx: provide twd clock lookup from device tree While booting from device tree, imx6q used to provide twd clock lookup by calling clk_register_clkdev() in clock driver. However, the commit bd60345 (ARM: use device tree to get smp_twd clock) forces DT boot to look up the clock from device tree. It causes the failure below when twd driver tries to get the clock, and hence kernel has to calibrate the local timer frequency. smp_twd: clock not found -2 ... Calibrating local timer... 396.13MHz. Fix the regression by providing twd clock lookup from device tree, and remove the unused twd clk_register_clkdev() call from clock driver. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 1 + arch/arm/mach-imx/clk-imx6q.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 06ec460b4581..281a223591ff 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -91,6 +91,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; + clocks = <&clks 15>; }; L2: l2-cache@00a02000 { diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 2f9ff93a4e61..22a3021a455b 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -443,7 +443,6 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); - clk_register_clkdev(clk[twd], NULL, "smp_twd"); clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); -- cgit v1.2.1 From e8094b2c17126c7dfdeafa296f206a4a3b122d23 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Thu, 4 Apr 2013 16:03:29 +0200 Subject: ARM i.MX6: Fix ldb_di clock selection According to the recent i.MX6 Quad technical reference manual, mode 0x4 (100b) of the CCM_CS2DCR register (address 0x020C402C) bits [11-9] and [14-12] select the PLL3 clock, and not the PLL3 PFD1 540M clock. In our code, the PLL3 root clock is named 'pll3_usb_otg', select this instead of the 540M clock. Signed-off-by: Dirk Behme Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 22a3021a455b..d38e54f5b6d7 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -115,7 +115,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m" static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", }; +static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; -- cgit v1.2.1 From b530f742ac27460d41d35b638ad6aad92044a982 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 8 Apr 2013 21:39:45 +0900 Subject: ARM: S3C24XX: Correct NR_IRQS definition for s3c2440 Due to NR_IRQS being incorrectly defined not all IRQ domains can be registered for S3C2440. It causes following errors on a s3c2440 SoC based board: NR_IRQS:89 S3C2440: IRQ Support irq: clearing pending status 00000002 ------------[ cut here ]------------ WARNING: at kernel/irq/irqdomain.c:234 0xc0056ed0() ... irq: could not create irq-domain ... s3c2410-wdt s3c2410-wdt: failed to install irq (-22) s3c2410-wdt: probe of s3c2410-wdt failed with error -22 ... samsung-uart s3c2440-uart.0: cannot get irq 74 Fix this by increasing NR_IRQS to at least (IRQ_S3C2443_AC97 + 1) if CPU_S3C2440 is selected, so the subintc IRQ domain gets properly registered. Signed-off-by: Tomasz Figa Signed-off-by: Sylwester Nawrocki Acked-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/include/mach/irqs.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index b7a9f4d469e8..1e73f5fa8659 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -188,10 +188,8 @@ #if defined(CONFIG_CPU_S3C2416) #define NR_IRQS (IRQ_S3C2416_I2S1 + 1) -#elif defined(CONFIG_CPU_S3C2443) -#define NR_IRQS (IRQ_S3C2443_AC97+1) #else -#define NR_IRQS (IRQ_S3C2440_AC97+1) +#define NR_IRQS (IRQ_S3C2443_AC97 + 1) #endif /* compatibility define. */ -- cgit v1.2.1 From 646dd2f0a980949b05042792fbadd72b735c3eda Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 9 Apr 2013 23:52:21 +0900 Subject: ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller The external pending interrupt register address (EINTPEND) offset is 0xa8, not 0x08. Without this patch the external interrupts are not properly acknowledged, which may lead to an interrupt storm and the system hang as soon as any external interrupt is requested. Signed-off-by: Sylwester Nawrocki Reviewed-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c index cb9f5e011e73..d8ba9bee4c7e 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/arch/arm/mach-s3c24xx/irq.c @@ -500,7 +500,7 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, base = (void *)0xfd000000; intc->reg_mask = base + 0xa4; - intc->reg_pending = base + 0x08; + intc->reg_pending = base + 0xa8; irq_num = 20; irq_start = S3C2410_IRQ(32); irq_offset = 4; -- cgit v1.2.1 From f1ca493b0b5e8f42d3b2dc8877860db2983f47b6 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Tue, 9 Apr 2013 17:13:59 +0200 Subject: ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running The Charge Pump needs the DSP clock to work properly, without it the bypass to HP/LINEOUT is not working properly. This requirement is not mentioned in the datasheet but has been confirmed by Mark Brown from Wolfson. Signed-off-by: Alban Bedel Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8903.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 134e41c870b9..f8a31ad0b203 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -1083,6 +1083,8 @@ static const struct snd_soc_dapm_route wm8903_intercon[] = { { "ROP", NULL, "Right Speaker PGA" }, { "RON", NULL, "Right Speaker PGA" }, + { "Charge Pump", NULL, "CLK_DSP" }, + { "Left Headphone Output PGA", NULL, "Charge Pump" }, { "Right Headphone Output PGA", NULL, "Charge Pump" }, { "Left Line Output PGA", NULL, "Charge Pump" }, -- cgit v1.2.1 From f6f629f8332ea70255f6c60c904270640a21a114 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 5 Apr 2013 13:19:26 +0100 Subject: ASoC: wm5102: Correct lookup of arizona struct in SYSCLK event Reported-by: Ryo Tsutsui Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm5102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index b82bbf584146..34d0201d6a78 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -584,7 +584,7 @@ static int wm5102_sysclk_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - struct arizona *arizona = dev_get_drvdata(codec->dev); + struct arizona *arizona = dev_get_drvdata(codec->dev->parent); struct regmap *regmap = codec->control_data; const struct reg_default *patch = NULL; int i, patch_size; -- cgit v1.2.1 From 51a246aa5c0a14b3d34a5c6d3c9e271c784b127f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 9 Apr 2013 18:03:25 +0100 Subject: regmap: Back out work buffer fix This reverts commit bc8ce4 (regmap: don't corrupt work buffer in _regmap_raw_write()) since it turns out that it can cause issues when taken in isolation from the other changes in -next that lead to its discovery. On the basis that nobody noticed the problems for quite some time without that subsequent work let's drop it from v3.9. Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index d34adef1e63e..58cfb3232428 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -943,7 +943,8 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg, unsigned int ival; int val_bytes = map->format.val_bytes; for (i = 0; i < val_len / val_bytes; i++) { - ival = map->format.parse_val(val + (i * val_bytes)); + memcpy(map->work_buf, val + (i * val_bytes), val_bytes); + ival = map->format.parse_val(map->work_buf); ret = regcache_write(map, reg + (i * map->reg_stride), ival); if (ret) { -- cgit v1.2.1 From 3e2e0d2c222bdf5bafd722dec1618fa6073ef372 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Tue, 9 Apr 2013 12:33:07 -0400 Subject: tile: comment assumption about __insn_mtspr for The arch_local_irq_save(), etc., routines are required to function as compiler barriers. They do, but it's subtle and requires knowing that the gcc builtin __insn_mtspr() is marked as a memory clobber. Provide a comment explaining the assumption. Signed-off-by: Chris Metcalf [ This came about from me wondering about the synchronization rules of __insn_mtspr() - Linus ] Signed-off-by: Linus Torvalds --- arch/tile/include/asm/irqflags.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h index 241c0bb60b12..c96f9bbb760d 100644 --- a/arch/tile/include/asm/irqflags.h +++ b/arch/tile/include/asm/irqflags.h @@ -40,7 +40,15 @@ #include #include -/* Set and clear kernel interrupt masks. */ +/* + * Set and clear kernel interrupt masks. + * + * NOTE: __insn_mtspr() is a compiler builtin marked as a memory + * clobber. We rely on it being equivalent to a compiler barrier in + * this code since arch_local_irq_save() and friends must act as + * compiler barriers. This compiler semantic is baked into enough + * places that the compiler will maintain it going forward. + */ #if CHIP_HAS_SPLIT_INTR_MASK() #if INT_PERF_COUNT < 32 || INT_AUX_PERF_COUNT < 32 || INT_MEM_ERROR >= 32 # error Fix assumptions about which word various interrupts are in -- cgit v1.2.1 From fa332941c0c7c00e3420078268b7558d0ef792b5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 9 Apr 2013 12:56:52 -0400 Subject: NFSv4: Fix another potential state manager deadlock Don't hold the NFSv4 sequence id while we check for open permission. The call to ACCESS may block due to reboot recovery. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 26431cf62ddb..0ad025eb523b 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1046,6 +1046,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata) /* Save the delegation */ nfs4_stateid_copy(&stateid, &delegation->stateid); rcu_read_unlock(); + nfs_release_seqid(opendata->o_arg.seqid); ret = nfs_may_open(state->inode, state->owner->so_cred, open_mode); if (ret != 0) goto out; -- cgit v1.2.1 From ca10b9e9a8ca7342ee07065289cbe74ac128c169 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 8 Apr 2013 17:58:11 +0000 Subject: selinux: add a skb_owned_by() hook Commit 90ba9b1986b5ac (tcp: tcp_make_synack() can use alloc_skb()) broke certain SELinux/NetLabel configurations by no longer correctly assigning the sock to the outgoing SYNACK packet. Cost of atomic operations on the LISTEN socket is quite big, and we would like it to happen only if really needed. This patch introduces a new security_ops->skb_owned_by() method, that is a void operation unless selinux is active. Reported-by: Miroslav Vadkerti Diagnosed-by: Paul Moore Signed-off-by: Eric Dumazet Cc: "David S. Miller" Cc: linux-security-module@vger.kernel.org Acked-by: James Morris Tested-by: Paul Moore Acked-by: Paul Moore Signed-off-by: David S. Miller --- include/linux/security.h | 8 ++++++++ net/ipv4/tcp_output.c | 1 + security/capability.c | 6 ++++++ security/security.c | 5 +++++ security/selinux/hooks.c | 7 +++++++ 5 files changed, 27 insertions(+) diff --git a/include/linux/security.h b/include/linux/security.h index eee7478cda70..6c3a78ace051 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1638,6 +1638,7 @@ struct security_operations { int (*tun_dev_attach_queue) (void *security); int (*tun_dev_attach) (struct sock *sk, void *security); int (*tun_dev_open) (void *security); + void (*skb_owned_by) (struct sk_buff *skb, struct sock *sk); #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM @@ -2588,6 +2589,8 @@ int security_tun_dev_attach_queue(void *security); int security_tun_dev_attach(struct sock *sk, void *security); int security_tun_dev_open(void *security); +void security_skb_owned_by(struct sk_buff *skb, struct sock *sk); + #else /* CONFIG_SECURITY_NETWORK */ static inline int security_unix_stream_connect(struct sock *sock, struct sock *other, @@ -2779,6 +2782,11 @@ static inline int security_tun_dev_open(void *security) { return 0; } + +static inline void security_skb_owned_by(struct sk_buff *skb, struct sock *sk) +{ +} + #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 5d0b4387cba6..b44cf81d8178 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2709,6 +2709,7 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst, skb_reserve(skb, MAX_TCP_HEADER); skb_dst_set(skb, dst); + security_skb_owned_by(skb, sk); mss = dst_metric_advmss(dst); if (tp->rx_opt.user_mss && tp->rx_opt.user_mss < mss) diff --git a/security/capability.c b/security/capability.c index 579775088967..6783c3e6c88e 100644 --- a/security/capability.c +++ b/security/capability.c @@ -737,6 +737,11 @@ static int cap_tun_dev_open(void *security) { return 0; } + +static void cap_skb_owned_by(struct sk_buff *skb, struct sock *sk) +{ +} + #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM @@ -1071,6 +1076,7 @@ void __init security_fixup_ops(struct security_operations *ops) set_to_cap_if_null(ops, tun_dev_open); set_to_cap_if_null(ops, tun_dev_attach_queue); set_to_cap_if_null(ops, tun_dev_attach); + set_to_cap_if_null(ops, skb_owned_by); #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM set_to_cap_if_null(ops, xfrm_policy_alloc_security); diff --git a/security/security.c b/security/security.c index 7b88c6aeaed4..03f248b84e9f 100644 --- a/security/security.c +++ b/security/security.c @@ -1290,6 +1290,11 @@ int security_tun_dev_open(void *security) } EXPORT_SYMBOL(security_tun_dev_open); +void security_skb_owned_by(struct sk_buff *skb, struct sock *sk) +{ + security_ops->skb_owned_by(skb, sk); +} + #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 2fa28c88900c..7171a957b933 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -51,6 +51,7 @@ #include #include #include /* for local_port_range[] */ +#include #include /* struct or_callable used in sock_rcv_skb */ #include #include @@ -4363,6 +4364,11 @@ static void selinux_inet_conn_established(struct sock *sk, struct sk_buff *skb) selinux_skb_peerlbl_sid(skb, family, &sksec->peer_sid); } +static void selinux_skb_owned_by(struct sk_buff *skb, struct sock *sk) +{ + skb_set_owner_w(skb, sk); +} + static int selinux_secmark_relabel_packet(u32 sid) { const struct task_security_struct *__tsec; @@ -5664,6 +5670,7 @@ static struct security_operations selinux_ops = { .tun_dev_attach_queue = selinux_tun_dev_attach_queue, .tun_dev_attach = selinux_tun_dev_attach, .tun_dev_open = selinux_tun_dev_open, + .skb_owned_by = selinux_skb_owned_by, #ifdef CONFIG_SECURITY_NETWORK_XFRM .xfrm_policy_alloc_security = selinux_xfrm_policy_alloc, -- cgit v1.2.1 From 386afc91144b36b42117b0092893f15bc8798a80 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 9 Apr 2013 10:48:33 -0700 Subject: spinlocks and preemption points need to be at least compiler barriers In UP and non-preempt respectively, the spinlocks and preemption disable/enable points are stubbed out entirely, because there is no regular code that can ever hit the kind of concurrency they are meant to protect against. However, while there is no regular code that can cause scheduling, we _do_ end up having some exceptional (literally!) code that can do so, and that we need to make sure does not ever get moved into the critical region by the compiler. In particular, get_user() and put_user() is generally implemented as inline asm statements (even if the inline asm may then make a call instruction to call out-of-line), and can obviously cause a page fault and IO as a result. If that inline asm has been scheduled into the middle of a preemption-safe (or spinlock-protected) code region, we obviously lose. Now, admittedly this is *very* unlikely to actually ever happen, and we've not seen examples of actual bugs related to this. But partly exactly because it's so hard to trigger and the resulting bug is so subtle, we should be extra careful to get this right. So make sure that even when preemption is disabled, and we don't have to generate any actual *code* to explicitly tell the system that we are in a preemption-disabled region, we need to at least tell the compiler not to move things around the critical region. This patch grew out of the same discussion that caused commits 79e5f05edcbf ("ARC: Add implicit compiler barrier to raw_local_irq* functions") and 3e2e0d2c222b ("tile: comment assumption about __insn_mtspr for ") to come about. Note for stable: use discretion when/if applying this. As mentioned, this bug may never have actually bitten anybody, and gcc may never have done the required code motion for it to possibly ever trigger in practice. Cc: stable@vger.kernel.org Cc: Steven Rostedt Cc: Peter Zijlstra Signed-off-by: Linus Torvalds --- include/linux/preempt.h | 22 ++++++++++++++-------- include/linux/spinlock_up.h | 29 ++++++++++++++++++----------- 2 files changed, 32 insertions(+), 19 deletions(-) diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 5a710b9c578e..87a03c746f17 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -93,14 +93,20 @@ do { \ #else /* !CONFIG_PREEMPT_COUNT */ -#define preempt_disable() do { } while (0) -#define sched_preempt_enable_no_resched() do { } while (0) -#define preempt_enable_no_resched() do { } while (0) -#define preempt_enable() do { } while (0) - -#define preempt_disable_notrace() do { } while (0) -#define preempt_enable_no_resched_notrace() do { } while (0) -#define preempt_enable_notrace() do { } while (0) +/* + * Even if we don't have any preemption, we need preempt disable/enable + * to be barriers, so that we don't have things like get_user/put_user + * that can cause faults and scheduling migrate into our preempt-protected + * region. + */ +#define preempt_disable() barrier() +#define sched_preempt_enable_no_resched() barrier() +#define preempt_enable_no_resched() barrier() +#define preempt_enable() barrier() + +#define preempt_disable_notrace() barrier() +#define preempt_enable_no_resched_notrace() barrier() +#define preempt_enable_notrace() barrier() #endif /* CONFIG_PREEMPT_COUNT */ diff --git a/include/linux/spinlock_up.h b/include/linux/spinlock_up.h index a26e2fb604e6..e2369c167dbd 100644 --- a/include/linux/spinlock_up.h +++ b/include/linux/spinlock_up.h @@ -16,7 +16,10 @@ * In the debug case, 1 means unlocked, 0 means locked. (the values * are inverted, to catch initialization bugs) * - * No atomicity anywhere, we are on UP. + * No atomicity anywhere, we are on UP. However, we still need + * the compiler barriers, because we do not want the compiler to + * move potentially faulting instructions (notably user accesses) + * into the locked sequence, resulting in non-atomic execution. */ #ifdef CONFIG_DEBUG_SPINLOCK @@ -25,6 +28,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) { lock->slock = 0; + barrier(); } static inline void @@ -32,6 +36,7 @@ arch_spin_lock_flags(arch_spinlock_t *lock, unsigned long flags) { local_irq_save(flags); lock->slock = 0; + barrier(); } static inline int arch_spin_trylock(arch_spinlock_t *lock) @@ -39,32 +44,34 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) char oldval = lock->slock; lock->slock = 0; + barrier(); return oldval > 0; } static inline void arch_spin_unlock(arch_spinlock_t *lock) { + barrier(); lock->slock = 1; } /* * Read-write spinlocks. No debug version. */ -#define arch_read_lock(lock) do { (void)(lock); } while (0) -#define arch_write_lock(lock) do { (void)(lock); } while (0) -#define arch_read_trylock(lock) ({ (void)(lock); 1; }) -#define arch_write_trylock(lock) ({ (void)(lock); 1; }) -#define arch_read_unlock(lock) do { (void)(lock); } while (0) -#define arch_write_unlock(lock) do { (void)(lock); } while (0) +#define arch_read_lock(lock) do { barrier(); (void)(lock); } while (0) +#define arch_write_lock(lock) do { barrier(); (void)(lock); } while (0) +#define arch_read_trylock(lock) ({ barrier(); (void)(lock); 1; }) +#define arch_write_trylock(lock) ({ barrier(); (void)(lock); 1; }) +#define arch_read_unlock(lock) do { barrier(); (void)(lock); } while (0) +#define arch_write_unlock(lock) do { barrier(); (void)(lock); } while (0) #else /* DEBUG_SPINLOCK */ #define arch_spin_is_locked(lock) ((void)(lock), 0) /* for sched.c and kernel_lock.c: */ -# define arch_spin_lock(lock) do { (void)(lock); } while (0) -# define arch_spin_lock_flags(lock, flags) do { (void)(lock); } while (0) -# define arch_spin_unlock(lock) do { (void)(lock); } while (0) -# define arch_spin_trylock(lock) ({ (void)(lock); 1; }) +# define arch_spin_lock(lock) do { barrier(); (void)(lock); } while (0) +# define arch_spin_lock_flags(lock, flags) do { barrier(); (void)(lock); } while (0) +# define arch_spin_unlock(lock) do { barrier(); (void)(lock); } while (0) +# define arch_spin_trylock(lock) ({ barrier(); (void)(lock); 1; }) #endif /* DEBUG_SPINLOCK */ #define arch_spin_is_contended(lock) (((void)(lock), 0)) -- cgit v1.2.1 From 52f21999c7b921a0390708b66ed286282c2e4bee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 28 Mar 2013 13:30:23 -0400 Subject: ecryptfs: close rmmod race Signed-off-by: Al Viro --- fs/ecryptfs/miscdev.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c index 412e6eda25f8..e4141f257495 100644 --- a/fs/ecryptfs/miscdev.c +++ b/fs/ecryptfs/miscdev.c @@ -80,13 +80,6 @@ ecryptfs_miscdev_open(struct inode *inode, struct file *file) int rc; mutex_lock(&ecryptfs_daemon_hash_mux); - rc = try_module_get(THIS_MODULE); - if (rc == 0) { - rc = -EIO; - printk(KERN_ERR "%s: Error attempting to increment module use " - "count; rc = [%d]\n", __func__, rc); - goto out_unlock_daemon_list; - } rc = ecryptfs_find_daemon_by_euid(&daemon); if (!rc) { rc = -EINVAL; @@ -96,7 +89,7 @@ ecryptfs_miscdev_open(struct inode *inode, struct file *file) if (rc) { printk(KERN_ERR "%s: Error attempting to spawn daemon; " "rc = [%d]\n", __func__, rc); - goto out_module_put_unlock_daemon_list; + goto out_unlock_daemon_list; } mutex_lock(&daemon->mux); if (daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN) { @@ -108,9 +101,6 @@ ecryptfs_miscdev_open(struct inode *inode, struct file *file) atomic_inc(&ecryptfs_num_miscdev_opens); out_unlock_daemon: mutex_unlock(&daemon->mux); -out_module_put_unlock_daemon_list: - if (rc) - module_put(THIS_MODULE); out_unlock_daemon_list: mutex_unlock(&ecryptfs_daemon_hash_mux); return rc; @@ -147,7 +137,6 @@ ecryptfs_miscdev_release(struct inode *inode, struct file *file) "bug.\n", __func__, rc); BUG(); } - module_put(THIS_MODULE); return rc; } @@ -471,6 +460,7 @@ out_free: static const struct file_operations ecryptfs_miscdev_fops = { + .owner = THIS_MODULE, .open = ecryptfs_miscdev_open, .poll = ecryptfs_miscdev_poll, .read = ecryptfs_miscdev_read, -- cgit v1.2.1 From 8ce584c7416d8a85a6f3edc17d1cddefe331e87e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 30 Mar 2013 20:13:46 -0400 Subject: procfs: add proc_remove_subtree() just what it sounds like; do that only to procfs subtrees you've created - doing that to something shared with another driver is not only antisocial, but might cause interesting races with proc_create() and its ilk. Signed-off-by: Al Viro --- fs/proc/generic.c | 119 ++++++++++++++++++++++++++++++++++++------------ include/linux/proc_fs.h | 2 + 2 files changed, 91 insertions(+), 30 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 4b3b3ffb52f1..21e1a8f1659d 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -755,37 +755,8 @@ void pde_put(struct proc_dir_entry *pde) free_proc_entry(pde); } -/* - * Remove a /proc entry and free it if it's not currently in use. - */ -void remove_proc_entry(const char *name, struct proc_dir_entry *parent) +static void entry_rundown(struct proc_dir_entry *de) { - struct proc_dir_entry **p; - struct proc_dir_entry *de = NULL; - const char *fn = name; - unsigned int len; - - spin_lock(&proc_subdir_lock); - if (__xlate_proc_name(name, &parent, &fn) != 0) { - spin_unlock(&proc_subdir_lock); - return; - } - len = strlen(fn); - - for (p = &parent->subdir; *p; p=&(*p)->next ) { - if (proc_match(len, fn, *p)) { - de = *p; - *p = de->next; - de->next = NULL; - break; - } - } - spin_unlock(&proc_subdir_lock); - if (!de) { - WARN(1, "name '%s'\n", name); - return; - } - spin_lock(&de->pde_unload_lock); /* * Stop accepting new callers into module. If you're @@ -817,6 +788,40 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent) spin_lock(&de->pde_unload_lock); } spin_unlock(&de->pde_unload_lock); +} + +/* + * Remove a /proc entry and free it if it's not currently in use. + */ +void remove_proc_entry(const char *name, struct proc_dir_entry *parent) +{ + struct proc_dir_entry **p; + struct proc_dir_entry *de = NULL; + const char *fn = name; + unsigned int len; + + spin_lock(&proc_subdir_lock); + if (__xlate_proc_name(name, &parent, &fn) != 0) { + spin_unlock(&proc_subdir_lock); + return; + } + len = strlen(fn); + + for (p = &parent->subdir; *p; p=&(*p)->next ) { + if (proc_match(len, fn, *p)) { + de = *p; + *p = de->next; + de->next = NULL; + break; + } + } + spin_unlock(&proc_subdir_lock); + if (!de) { + WARN(1, "name '%s'\n", name); + return; + } + + entry_rundown(de); if (S_ISDIR(de->mode)) parent->nlink--; @@ -827,3 +832,57 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent) pde_put(de); } EXPORT_SYMBOL(remove_proc_entry); + +int remove_proc_subtree(const char *name, struct proc_dir_entry *parent) +{ + struct proc_dir_entry **p; + struct proc_dir_entry *root = NULL, *de, *next; + const char *fn = name; + unsigned int len; + + spin_lock(&proc_subdir_lock); + if (__xlate_proc_name(name, &parent, &fn) != 0) { + spin_unlock(&proc_subdir_lock); + return -ENOENT; + } + len = strlen(fn); + + for (p = &parent->subdir; *p; p=&(*p)->next ) { + if (proc_match(len, fn, *p)) { + root = *p; + *p = root->next; + root->next = NULL; + break; + } + } + if (!root) { + spin_unlock(&proc_subdir_lock); + return -ENOENT; + } + de = root; + while (1) { + next = de->subdir; + if (next) { + de->subdir = next->next; + next->next = NULL; + de = next; + continue; + } + spin_unlock(&proc_subdir_lock); + + entry_rundown(de); + next = de->parent; + if (S_ISDIR(de->mode)) + next->nlink--; + de->nlink = 0; + if (de == root) + break; + pde_put(de); + + spin_lock(&proc_subdir_lock); + de = next; + } + pde_put(root); + return 0; +} +EXPORT_SYMBOL(remove_proc_subtree); diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 8307f2f94d86..94dfb2aa5533 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -117,6 +117,7 @@ struct proc_dir_entry *proc_create_data(const char *name, umode_t mode, const struct file_operations *proc_fops, void *data); extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent); +extern int remove_proc_subtree(const char *name, struct proc_dir_entry *parent); struct pid_namespace; @@ -202,6 +203,7 @@ static inline struct proc_dir_entry *proc_create_data(const char *name, return NULL; } #define remove_proc_entry(name, parent) do {} while (0) +#define remove_proc_subtree(name, parent) do {} while (0) static inline struct proc_dir_entry *proc_symlink(const char *name, struct proc_dir_entry *parent,const char *dest) {return NULL;} -- cgit v1.2.1 From ccf932042fa7785832d8989ba1369cd7c7f5d7a1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 31 Mar 2013 22:34:37 -0400 Subject: palinfo fixes * check for proc_mkdir() failures * fix buffer overrun - sizeof(format string) is *not* enough to hold sprintf() result. * use proc_remove_subtree(); life's much easier with it Signed-off-by: Al Viro --- arch/ia64/kernel/palinfo.c | 77 ++++++++-------------------------------------- 1 file changed, 13 insertions(+), 64 deletions(-) diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index 77597e5ea60a..79521d5499f9 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -849,17 +849,6 @@ static palinfo_entry_t palinfo_entries[]={ #define NR_PALINFO_ENTRIES (int) ARRAY_SIZE(palinfo_entries) -/* - * this array is used to keep track of the proc entries we create. This is - * required in the module mode when we need to remove all entries. The procfs code - * does not do recursion of deletion - * - * Notes: - * - +1 accounts for the cpuN directory entry in /proc/pal - */ -#define NR_PALINFO_PROC_ENTRIES (NR_CPUS*(NR_PALINFO_ENTRIES+1)) - -static struct proc_dir_entry *palinfo_proc_entries[NR_PALINFO_PROC_ENTRIES]; static struct proc_dir_entry *palinfo_dir; /* @@ -971,60 +960,32 @@ palinfo_read_entry(char *page, char **start, off_t off, int count, int *eof, voi static void __cpuinit create_palinfo_proc_entries(unsigned int cpu) { -# define CPUSTR "cpu%d" - pal_func_cpu_u_t f; - struct proc_dir_entry **pdir; struct proc_dir_entry *cpu_dir; int j; - char cpustr[sizeof(CPUSTR)]; - - - /* - * we keep track of created entries in a depth-first order for - * cleanup purposes. Each entry is stored into palinfo_proc_entries - */ - sprintf(cpustr,CPUSTR, cpu); + char cpustr[3+4+1]; /* cpu numbers are up to 4095 on itanic */ + sprintf(cpustr, "cpu%d", cpu); cpu_dir = proc_mkdir(cpustr, palinfo_dir); + if (!cpu_dir) + return; f.req_cpu = cpu; - /* - * Compute the location to store per cpu entries - * We dont store the top level entry in this list, but - * remove it finally after removing all cpu entries. - */ - pdir = &palinfo_proc_entries[cpu*(NR_PALINFO_ENTRIES+1)]; - *pdir++ = cpu_dir; for (j=0; j < NR_PALINFO_ENTRIES; j++) { f.func_id = j; - *pdir = create_proc_read_entry( - palinfo_entries[j].name, 0, cpu_dir, - palinfo_read_entry, (void *)f.value); - pdir++; + create_proc_read_entry( + palinfo_entries[j].name, 0, cpu_dir, + palinfo_read_entry, (void *)f.value); } } static void remove_palinfo_proc_entries(unsigned int hcpu) { - int j; - struct proc_dir_entry *cpu_dir, **pdir; - - pdir = &palinfo_proc_entries[hcpu*(NR_PALINFO_ENTRIES+1)]; - cpu_dir = *pdir; - *pdir++=NULL; - for (j=0; j < (NR_PALINFO_ENTRIES); j++) { - if ((*pdir)) { - remove_proc_entry ((*pdir)->name, cpu_dir); - *pdir ++= NULL; - } - } - - if (cpu_dir) { - remove_proc_entry(cpu_dir->name, palinfo_dir); - } + char cpustr[3+4+1]; /* cpu numbers are up to 4095 on itanic */ + sprintf(cpustr, "cpu%d", hcpu); + remove_proc_subtree(cpustr, palinfo_dir); } static int __cpuinit palinfo_cpu_callback(struct notifier_block *nfb, @@ -1058,6 +1019,8 @@ palinfo_init(void) printk(KERN_INFO "PAL Information Facility v%s\n", PALINFO_VERSION); palinfo_dir = proc_mkdir("pal", NULL); + if (!palinfo_dir) + return -ENOMEM; /* Create palinfo dirs in /proc for all online cpus */ for_each_online_cpu(i) { @@ -1073,22 +1036,8 @@ palinfo_init(void) static void __exit palinfo_exit(void) { - int i = 0; - - /* remove all nodes: depth first pass. Could optimize this */ - for_each_online_cpu(i) { - remove_palinfo_proc_entries(i); - } - - /* - * Remove the top level entry finally - */ - remove_proc_entry(palinfo_dir->name, NULL); - - /* - * Unregister from cpu notifier callbacks - */ unregister_hotcpu_notifier(&palinfo_cpu_notifier); + remove_proc_subtree("pal", NULL); } module_init(palinfo_init); -- cgit v1.2.1 From e9c5d8a562f01b211926d70443378eb14b29a676 Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Tue, 9 Apr 2013 17:33:29 +0400 Subject: mnt: release locks on error path in do_loopback do_loopback calls lock_mount(path) and forget to unlock_mount if clone_mnt or copy_mnt fails. [ 77.661566] ================================================ [ 77.662939] [ BUG: lock held when returning to user space! ] [ 77.664104] 3.9.0-rc5+ #17 Not tainted [ 77.664982] ------------------------------------------------ [ 77.666488] mount/514 is leaving the kernel with locks still held! [ 77.668027] 2 locks held by mount/514: [ 77.668817] #0: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [] lock_mount+0x32/0xe0 [ 77.671755] #1: (&namespace_sem){+++++.}, at: [] lock_mount+0x4a/0xe0 Signed-off-by: Andrey Vagin Signed-off-by: Al Viro --- fs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namespace.c b/fs/namespace.c index 50ca17d3cb45..6c7d31eebba4 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1686,7 +1686,7 @@ static int do_loopback(struct path *path, const char *old_name, if (IS_ERR(mnt)) { err = PTR_ERR(mnt); - goto out; + goto out2; } err = graft_tree(mnt, path); -- cgit v1.2.1 From f934af05cb1bf20558542185299394a69060b829 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Tue, 9 Apr 2013 15:35:46 -0400 Subject: add memory barrier to arch_local_irq_restore arch_local_irq_save() and friends are required to act as compiler memory barriers. This patch adds a "memory" clobber to the inline asm code in arch_local_irq_restore() which is used as the building block for other functions needing to set/clear the interrupt enable in the CSR register. Signed-off-by: Mark Salter --- arch/c6x/include/asm/irqflags.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/c6x/include/asm/irqflags.h b/arch/c6x/include/asm/irqflags.h index cf78e09e18c3..2c71d5634ec2 100644 --- a/arch/c6x/include/asm/irqflags.h +++ b/arch/c6x/include/asm/irqflags.h @@ -27,7 +27,7 @@ static inline unsigned long arch_local_save_flags(void) /* set interrupt enabled status */ static inline void arch_local_irq_restore(unsigned long flags) { - asm volatile (" mvc .s2 %0,CSR\n" : : "b"(flags)); + asm volatile (" mvc .s2 %0,CSR\n" : : "b"(flags) : "memory"); } /* unconditionally enable interrupts */ -- cgit v1.2.1 From 83e03b3fe4daffdebbb42151d5410d730ae50bd1 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 1 Apr 2013 21:46:23 +0900 Subject: tracing: Fix double free when function profile init failed On the failure path, stat->start and stat->pages will refer same page. So it'll attempt to free the same page again and get kernel panic. Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker Cc: Namhyung Kim Cc: stable@vger.kernel.org Signed-off-by: Namhyung Kim Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 7e897106b7e0..926ebfb74936 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -694,7 +694,6 @@ int ftrace_profile_pages_init(struct ftrace_profile_stat *stat) free_page(tmp); } - free_page((unsigned long)stat->pages); stat->pages = NULL; stat->start = NULL; -- cgit v1.2.1 From 1812a3db0874be1d1524086da9e84397b800f546 Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Fri, 5 Apr 2013 10:51:15 -0400 Subject: drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal. This change properly enables the "requester" in G200ER cards that is responsible for getting pixels out of memory and clocking them out to the screen. Signed-off-by: Christopher Harvey Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_mode.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index fe22bb780e1d..78d8e919509f 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -751,8 +751,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, int i; unsigned char misc = 0; unsigned char ext_vga[6]; - unsigned char ext_vga_index24; - unsigned char dac_index90 = 0; u8 bppshift; static unsigned char dacvalue[] = { @@ -803,7 +801,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, option2 = 0x0000b000; break; case G200_ER: - dac_index90 = 0; break; } @@ -852,10 +849,8 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, WREG_DAC(i, dacvalue[i]); } - if (mdev->type == G200_ER) { - WREG_DAC(0x90, dac_index90); - } - + if (mdev->type == G200_ER) + WREG_DAC(0x90, 0); if (option) pci_write_config_dword(dev->pdev, PCI_MGA_OPTION, option); @@ -952,8 +947,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, if (mdev->type == G200_WB) ext_vga[1] |= 0x88; - ext_vga_index24 = 0x05; - /* Set pixel clocks */ misc = 0x2d; WREG8(MGA_MISC_OUT, misc); @@ -965,7 +958,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, } if (mdev->type == G200_ER) - WREG_ECRT(24, ext_vga_index24); + WREG_ECRT(0x24, 0x5); if (mdev->type == G200_EV) { WREG_ECRT(6, 0); -- cgit v1.2.1 From 765024697807ad1e1cac332aa891253ca4a339da Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 9 Apr 2013 16:33:06 +0200 Subject: dmaengine: omap-dma: Start DMA without delay for cyclic channels cyclic DMA is only used by audio which needs DMA to be started without a delay. If the DMA for audio is started using the tasklet we experience random channel switch (to be more precise: channel shift). Reported-by: Peter Meerwald CC: stable@vger.kernel.org # v3.7+ Signed-off-by: Peter Ujfalusi Acked-by: Santosh Shilimkar Acked-by: Russell King Signed-off-by: Vinod Koul --- drivers/dma/omap-dma.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index c4b4fd2acc42..08b43bf37158 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -276,12 +276,20 @@ static void omap_dma_issue_pending(struct dma_chan *chan) spin_lock_irqsave(&c->vc.lock, flags); if (vchan_issue_pending(&c->vc) && !c->desc) { - struct omap_dmadev *d = to_omap_dma_dev(chan->device); - spin_lock(&d->lock); - if (list_empty(&c->node)) - list_add_tail(&c->node, &d->pending); - spin_unlock(&d->lock); - tasklet_schedule(&d->task); + /* + * c->cyclic is used only by audio and in this case the DMA need + * to be started without delay. + */ + if (!c->cyclic) { + struct omap_dmadev *d = to_omap_dma_dev(chan->device); + spin_lock(&d->lock); + if (list_empty(&c->node)) + list_add_tail(&c->node, &d->pending); + spin_unlock(&d->lock); + tasklet_schedule(&d->task); + } else { + omap_dma_start_desc(c); + } } spin_unlock_irqrestore(&c->vc.lock, flags); } -- cgit v1.2.1 From aaaf165b247a1a8ea5cd2936d9fd1eefe5e580f9 Mon Sep 17 00:00:00 2001 From: Nigel Roberts Date: Sun, 31 Mar 2013 15:13:24 +1100 Subject: Fix GE0/GE1 init on ix2-200 as GE0 has no PHY Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index f655b2637b0e..e5f70415905a 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .duplex = DUPLEX_FULL, }; +static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + void __init iomega_ix2_200_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_ge01_init(&iomega_ix2_200_ge00_data); + kirkwood_ge00_init(&iomega_ix2_200_ge00_data); + kirkwood_ge01_init(&iomega_ix2_200_ge01_data); } -- cgit v1.2.1 From eb04e0ac198cec3bab407ad220438dfa65c19c67 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 10 Apr 2013 12:44:18 -0400 Subject: NFSv4: Doh! Typo in the fix to nfs41_walk_client_list Make sure that we set the status to 0 on success. Missed in testing because it never appears when doing multiple mounts to _different_ servers. Signed-off-by: Trond Myklebust Cc: # 3.7.x: 7b1f1fd: NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list --- fs/nfs/nfs4client.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index c7b346f8cc44..66b6664dcd4c 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -482,6 +482,7 @@ int nfs41_walk_client_list(struct nfs_client *new, atomic_inc(&pos->cl_count); *result = pos; + status = 0; dprintk("NFS: <-- %s using nfs_client = %p ({%d})\n", __func__, pos, atomic_read(&pos->cl_count)); break; -- cgit v1.2.1 From 600468d0686096ddc1000c8a2e69475931084414 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 5 Apr 2013 14:32:52 +0200 Subject: arm: mvebu: Fix the irq map function in SMP mode This patch fix the regression introduced by the commit 3202bf0157ccb "arm: mvebu: Improve the SMP support of the interrupt controller": GPIO IRQ were no longer delivered to the CPUs. To be delivered to a CPU an interrupt must be enabled at CPU level and at interrupt source level. Before the offending patch, all the interrupts were enabled at source level during map() function. Mask() and unmask() was done by handling the per-CPU part. It was fine when running in UP with only one CPU. The offending patch added support for SMP, in this case mask() and unmask() was done by handling the interrupt source level part. The per-CPU level part was handled by the affinity API to select the CPU which will receive the interrupt. (Due to some hardware limitation only one CPU at a time can received a given interrupt). For "normal" interrupt __setup_irq() was called when an irq was registered. irq_set_affinity() is called from this function, which enabled the interrupt on one of the CPUs. Whereas for GPIO IRQ which were chained interrupts, the irq_set_affinity() was never called and none of the CPUs was selected to receive the interrupt. With this patch all the interrupt are enable on the current CPU during map() function. Enabling the interrupts on a CPU doesn't depend anymore on irq_set_affinity() and then the chained irq are not anymore a special case. However the CPU which will receive the irq can still be modify later using irq_set_affinity(). Tested with Mirabox (A370) and Openblocks AX3 (AXP), rootfs mounted over NFS, compiled with CONFIG_SMP=y/N. Signed-off-by: Gregory CLEMENT Reported-by: Ryan Press Investigated-by: Ezequiel Garcia Tested-by: Ezequiel Garcia Tested-by: Ryan Press Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/irq-armada-370-xp.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c index 6a9195e10579..d5970f5a1e8d 100644 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c @@ -61,7 +61,6 @@ static struct irq_domain *armada_370_xp_mpic_domain; */ static void armada_370_xp_irq_mask(struct irq_data *d) { -#ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) @@ -70,15 +69,10 @@ static void armada_370_xp_irq_mask(struct irq_data *d) else writel(hwirq, per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); -#else - writel(irqd_to_hwirq(d), - per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); -#endif } static void armada_370_xp_irq_unmask(struct irq_data *d) { -#ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) @@ -87,10 +81,6 @@ static void armada_370_xp_irq_unmask(struct irq_data *d) else writel(hwirq, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -#else - writel(irqd_to_hwirq(d), - per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -#endif } #ifdef CONFIG_SMP @@ -146,7 +136,11 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { armada_370_xp_irq_mask(irq_get_irq_data(virq)); - writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); + if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) + writel(hw, per_cpu_int_base + + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); + else + writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); irq_set_status_flags(virq, IRQ_LEVEL); if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) { -- cgit v1.2.1 From 1160c2779b826c6f5c08e5cc542de58fd1f667d5 Mon Sep 17 00:00:00 2001 From: Samu Kallio Date: Sat, 23 Mar 2013 09:36:35 -0400 Subject: x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates In paravirtualized x86_64 kernels, vmalloc_fault may cause an oops when lazy MMU updates are enabled, because set_pgd effects are being deferred. One instance of this problem is during process mm cleanup with memory cgroups enabled. The chain of events is as follows: - zap_pte_range enables lazy MMU updates - zap_pte_range eventually calls mem_cgroup_charge_statistics, which accesses the vmalloc'd mem_cgroup per-cpu stat area - vmalloc_fault is triggered which tries to sync the corresponding PGD entry with set_pgd, but the update is deferred - vmalloc_fault oopses due to a mismatch in the PUD entries The OOPs usually looks as so: ------------[ cut here ]------------ kernel BUG at arch/x86/mm/fault.c:396! invalid opcode: 0000 [#1] SMP .. snip .. CPU 1 Pid: 10866, comm: httpd Not tainted 3.6.10-4.fc18.x86_64 #1 RIP: e030:[] [] vmalloc_fault+0x11f/0x208 .. snip .. Call Trace: [] do_page_fault+0x399/0x4b0 [] ? xen_mc_extend_args+0xec/0x110 [] page_fault+0x25/0x30 [] ? mem_cgroup_charge_statistics.isra.13+0x13/0x50 [] __mem_cgroup_uncharge_common+0xd8/0x350 [] mem_cgroup_uncharge_page+0x57/0x60 [] page_remove_rmap+0xe0/0x150 [] ? vm_normal_page+0x1a/0x80 [] unmap_single_vma+0x531/0x870 [] unmap_vmas+0x52/0xa0 [] ? pte_mfn_to_pfn+0x72/0x100 [] exit_mmap+0x98/0x170 [] ? __raw_callee_save_xen_pmd_val+0x11/0x1e [] mmput+0x83/0xf0 [] exit_mm+0x104/0x130 [] do_exit+0x15a/0x8c0 [] do_group_exit+0x3f/0xa0 [] sys_exit_group+0x17/0x20 [] system_call_fastpath+0x16/0x1b Calling arch_flush_lazy_mmu_mode immediately after set_pgd makes the changes visible to the consistency checks. Cc: RedHat-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=914737 Tested-by: Josh Boyer Reported-and-Tested-by: Krishna Raman Signed-off-by: Samu Kallio Link: http://lkml.kernel.org/r/1364045796-10720-1-git-send-email-konrad.wilk@oracle.com Tested-by: Konrad Rzeszutek Wilk Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: H. Peter Anvin --- arch/x86/mm/fault.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 2b97525246d4..0e883364abb5 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -378,10 +378,12 @@ static noinline __kprobes int vmalloc_fault(unsigned long address) if (pgd_none(*pgd_ref)) return -1; - if (pgd_none(*pgd)) + if (pgd_none(*pgd)) { set_pgd(pgd, *pgd_ref); - else + arch_flush_lazy_mmu_mode(); + } else { BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref)); + } /* * Below here mismatches are bugs because these lower tables -- cgit v1.2.1 From 511ba86e1d386f671084b5d0e6f110bb30b8eeb2 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Sat, 23 Mar 2013 09:36:36 -0400 Subject: x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal Invoking arch_flush_lazy_mmu_mode() results in calls to preempt_enable()/disable() which may have performance impact. Since lazy MMU is not used on bare metal we can patch away arch_flush_lazy_mmu_mode() so that it is never called in such environment. [ hpa: the previous patch "Fix vmalloc_fault oops during lazy MMU updates" may cause a minor performance regression on bare metal. This patch resolves that performance regression. It is somewhat unclear to me if this is a good -stable candidate. ] Signed-off-by: Boris Ostrovsky Link: http://lkml.kernel.org/r/1364045796-10720-2-git-send-email-konrad.wilk@oracle.com Tested-by: Josh Boyer Tested-by: Konrad Rzeszutek Wilk Acked-by: Borislav Petkov Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: H. Peter Anvin Cc: SEE NOTE ABOVE --- arch/x86/include/asm/paravirt.h | 5 ++++- arch/x86/include/asm/paravirt_types.h | 2 ++ arch/x86/kernel/paravirt.c | 25 +++++++++++++------------ arch/x86/lguest/boot.c | 1 + arch/x86/xen/mmu.c | 1 + 5 files changed, 21 insertions(+), 13 deletions(-) diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 5edd1742cfd0..7361e47db79f 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -703,7 +703,10 @@ static inline void arch_leave_lazy_mmu_mode(void) PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave); } -void arch_flush_lazy_mmu_mode(void); +static inline void arch_flush_lazy_mmu_mode(void) +{ + PVOP_VCALL0(pv_mmu_ops.lazy_mode.flush); +} static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx, phys_addr_t phys, pgprot_t flags) diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h index 142236ed83af..b3b0ec1dac86 100644 --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -91,6 +91,7 @@ struct pv_lazy_ops { /* Set deferred update mode, used for batching operations. */ void (*enter)(void); void (*leave)(void); + void (*flush)(void); }; struct pv_time_ops { @@ -679,6 +680,7 @@ void paravirt_end_context_switch(struct task_struct *next); void paravirt_enter_lazy_mmu(void); void paravirt_leave_lazy_mmu(void); +void paravirt_flush_lazy_mmu(void); void _paravirt_nop(void); u32 _paravirt_ident_32(u32); diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 17fff18a1031..8bfb335f74bb 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -263,6 +263,18 @@ void paravirt_leave_lazy_mmu(void) leave_lazy(PARAVIRT_LAZY_MMU); } +void paravirt_flush_lazy_mmu(void) +{ + preempt_disable(); + + if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) { + arch_leave_lazy_mmu_mode(); + arch_enter_lazy_mmu_mode(); + } + + preempt_enable(); +} + void paravirt_start_context_switch(struct task_struct *prev) { BUG_ON(preemptible()); @@ -292,18 +304,6 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void) return this_cpu_read(paravirt_lazy_mode); } -void arch_flush_lazy_mmu_mode(void) -{ - preempt_disable(); - - if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) { - arch_leave_lazy_mmu_mode(); - arch_enter_lazy_mmu_mode(); - } - - preempt_enable(); -} - struct pv_info pv_info = { .name = "bare hardware", .paravirt_enabled = 0, @@ -475,6 +475,7 @@ struct pv_mmu_ops pv_mmu_ops = { .lazy_mode = { .enter = paravirt_nop, .leave = paravirt_nop, + .flush = paravirt_nop, }, .set_fixmap = native_set_fixmap, diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 1cbd89ca5569..7114c63f047d 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1334,6 +1334,7 @@ __init void lguest_init(void) pv_mmu_ops.read_cr3 = lguest_read_cr3; pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu; pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mmu_mode; + pv_mmu_ops.lazy_mode.flush = paravirt_flush_lazy_mmu; pv_mmu_ops.pte_update = lguest_pte_update; pv_mmu_ops.pte_update_defer = lguest_pte_update; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 6afbb2ca9a0a..2f5d6875555e 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2196,6 +2196,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initconst = { .lazy_mode = { .enter = paravirt_enter_lazy_mmu, .leave = xen_leave_lazy_mmu, + .flush = paravirt_flush_lazy_mmu, }, .set_fixmap = xen_set_fixmap, -- cgit v1.2.1 From 61a0f6efc8932e9914e1782ff3a027e23c687fc6 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 9 Apr 2013 23:19:00 +0000 Subject: e100: Add dma mapping error check e100 uses pci_map_single, but fails to check for a dma mapping error after its use, resulting in a stack trace: [ 46.656594] ------------[ cut here ]------------ [ 46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950() [ 46.657004] Hardware name: To Be Filled By O.E.M. [ 46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single] [ 46.657004] Modules linked in: [ 46.657004] w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core sata_promise crc_itu_t [ 46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1 [ 46.657004] Call Trace: [ 46.657004] [] warn_slowpath_common+0x70/0xa0 [ 46.657004] [] warn_slowpath_fmt+0x4c/0x50 [ 46.657004] [] check_unmap+0x47b/0x950 [ 46.657004] [] debug_dma_unmap_page+0x5f/0x70 [ 46.657004] [] ? e100_tx_clean+0x30/0x210 [e100] [ 46.657004] [] e100_tx_clean+0xe8/0x210 [e100] [ 46.657004] [] e100_poll+0x56f/0x6c0 [e100] [ 46.657004] [] ? net_rx_action+0xa1/0x370 [ 46.657004] [] net_rx_action+0x172/0x370 [ 46.657004] [] __do_softirq+0xef/0x3d0 [ 46.657004] [] call_softirq+0x1c/0x30 [ 46.657004] [] do_softirq+0x85/0xc0 [ 46.657004] [] irq_exit+0xd5/0xe0 [ 46.657004] [] do_IRQ+0x56/0xc0 [ 46.657004] [] common_interrupt+0x72/0x72 [ 46.657004] [] ? _raw_spin_unlock_irqrestore+0x3b/0x70 [ 46.657004] [] __slab_free+0x58/0x38b [ 46.657004] [] ? fsnotify_clear_marks_by_inode+0x34/0x120 [ 46.657004] [] ? kmem_cache_free+0x97/0x320 [ 46.657004] [] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [] kmem_cache_free+0x312/0x320 [ 46.657004] [] sock_destroy_inode+0x34/0x40 [ 46.657004] [] destroy_inode+0x38/0x60 [ 46.657004] [] evict+0x10e/0x1a0 [ 46.657004] [] iput+0xf5/0x180 [ 46.657004] [] dput+0x248/0x310 [ 46.657004] [] __fput+0x171/0x240 [ 46.657004] [] ____fput+0xe/0x10 [ 46.657004] [] task_work_run+0xac/0xe0 [ 46.657004] [] do_exit+0x26d/0xc30 [ 46.657004] [] ? finish_task_switch+0x7c/0x120 [ 46.657004] [] ? retint_swapgs+0x13/0x1b [ 46.657004] [] do_group_exit+0x49/0xc0 [ 46.657004] [] sys_exit_group+0x14/0x20 [ 46.657004] [] system_call_fastpath+0x16/0x1b [ 46.657004] ---[ end trace 4468c44e2156e7d1 ]--- [ 46.657004] Mapped at: [ 46.657004] [] debug_dma_map_page+0x91/0x140 [ 46.657004] [] e100_xmit_prepare+0x12b/0x1c0 [e100] [ 46.657004] [] e100_exec_cb+0x84/0x140 [e100] [ 46.657004] [] e100_xmit_frame+0x3a/0x190 [e100] [ 46.657004] [] dev_hard_start_xmit+0x259/0x6c0 Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the dma_mapping_error check in the obvious place This was reported previously here: http://article.gmane.org/gmane.linux.network/257893 But nobody stepped up and fixed it. CC: Josh Boyer CC: e1000-devel@lists.sourceforge.net Signed-off-by: Neil Horman Reported-by: Michal Jaegermann Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e100.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index ec800b093e7e..d2bea3f07c73 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -870,7 +870,7 @@ err_unlock: } static int e100_exec_cb(struct nic *nic, struct sk_buff *skb, - void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *)) + int (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *)) { struct cb *cb; unsigned long flags; @@ -888,10 +888,13 @@ static int e100_exec_cb(struct nic *nic, struct sk_buff *skb, nic->cbs_avail--; cb->skb = skb; + err = cb_prepare(nic, cb, skb); + if (err) + goto err_unlock; + if (unlikely(!nic->cbs_avail)) err = -ENOSPC; - cb_prepare(nic, cb, skb); /* Order is important otherwise we'll be in a race with h/w: * set S-bit in current first, then clear S-bit in previous. */ @@ -1091,7 +1094,7 @@ static void e100_get_defaults(struct nic *nic) nic->mii.mdio_write = mdio_write; } -static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) +static int e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) { struct config *config = &cb->u.config; u8 *c = (u8 *)config; @@ -1181,6 +1184,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); + return 0; } /************************************************************************* @@ -1331,7 +1335,7 @@ static const struct firmware *e100_request_firmware(struct nic *nic) return fw; } -static void e100_setup_ucode(struct nic *nic, struct cb *cb, +static int e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { const struct firmware *fw = (void *)skb; @@ -1358,6 +1362,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80); cb->command = cpu_to_le16(cb_ucode | cb_el); + return 0; } static inline int e100_load_ucode_wait(struct nic *nic) @@ -1400,18 +1405,20 @@ static inline int e100_load_ucode_wait(struct nic *nic) return err; } -static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, +static int e100_setup_iaaddr(struct nic *nic, struct cb *cb, struct sk_buff *skb) { cb->command = cpu_to_le16(cb_iaaddr); memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN); + return 0; } -static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb) +static int e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb) { cb->command = cpu_to_le16(cb_dump); cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr + offsetof(struct mem, dump_buf)); + return 0; } static int e100_phy_check_without_mii(struct nic *nic) @@ -1581,7 +1588,7 @@ static int e100_hw_init(struct nic *nic) return 0; } -static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) +static int e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) { struct net_device *netdev = nic->netdev; struct netdev_hw_addr *ha; @@ -1596,6 +1603,7 @@ static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr, ETH_ALEN); } + return 0; } static void e100_set_multicast_list(struct net_device *netdev) @@ -1756,11 +1764,18 @@ static void e100_watchdog(unsigned long data) round_jiffies(jiffies + E100_WATCHDOG_PERIOD)); } -static void e100_xmit_prepare(struct nic *nic, struct cb *cb, +static int e100_xmit_prepare(struct nic *nic, struct cb *cb, struct sk_buff *skb) { + dma_addr_t dma_addr; cb->command = nic->tx_command; + dma_addr = pci_map_single(nic->pdev, + skb->data, skb->len, PCI_DMA_TODEVICE); + /* If we can't map the skb, have the upper layer try later */ + if (pci_dma_mapping_error(nic->pdev, dma_addr)) + return -ENOMEM; + /* * Use the last 4 bytes of the SKB payload packet as the CRC, used for * testing, ie sending frames with bad CRC. @@ -1777,11 +1792,10 @@ static void e100_xmit_prepare(struct nic *nic, struct cb *cb, cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; cb->u.tcb.tbd_count = 1; - cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, - skb->data, skb->len, PCI_DMA_TODEVICE)); - /* check for mapping failure? */ + cb->u.tcb.tbd.buf_addr = cpu_to_le32(dma_addr); cb->u.tcb.tbd.size = cpu_to_le16(skb->len); skb_tx_timestamp(skb); + return 0; } static netdev_tx_t e100_xmit_frame(struct sk_buff *skb, -- cgit v1.2.1 From fea75645342c7ad574214497a78e562db12dfd7b Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 10 Apr 2013 13:34:39 +0300 Subject: bnx2x: Prevent null pointer dereference in AFEX mode The cnic module is responsible for initializing various bnx2x structs via callbacks provided by the bnx2x module. One such struct is the queue object for the FCoE queue. If a device is working in AFEX mode and its configuration allows FCoE yet the cnic module is not loaded, it's very likely a null pointer dereference will occur, as the bnx2x will erroneously access the FCoE's queue object. Prevent said access until cnic properly registers itself. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e81a747ea8ce..8e58da909f5c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4947,7 +4947,7 @@ static void bnx2x_after_function_update(struct bnx2x *bp) q); } - if (!NO_FCOE(bp)) { + if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) { fp = &bp->fp[FCOE_IDX(bp)]; queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; @@ -13354,6 +13354,7 @@ static int bnx2x_unregister_cnic(struct net_device *dev) RCU_INIT_POINTER(bp->cnic_ops, NULL); mutex_unlock(&bp->cnic_mutex); synchronize_rcu(); + bp->cnic_enabled = false; kfree(bp->cnic_kwq); bp->cnic_kwq = NULL; -- cgit v1.2.1 From 6b07a24fc38476e04f591cc17594bc1835b9efdd Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 10 Apr 2013 15:34:14 -0400 Subject: lsm: add the missing documentation for the security_skb_owned_by() hook Unfortunately we didn't catch the missing comments earlier when the patch was merged. Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/linux/security.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/security.h b/include/linux/security.h index 6c3a78ace051..032c366ef1c6 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1012,6 +1012,10 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * This hook can be used by the module to update any security state * associated with the TUN device's security structure. * @security pointer to the TUN devices's security structure. + * @skb_owned_by: + * This hook sets the packet's owning sock. + * @skb is the packet. + * @sk the sock which owns the packet. * * Security hooks for XFRM operations. * -- cgit v1.2.1 From c369c9a4a7c82d33329d869cbaf93304cc7a0c40 Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Tue, 9 Apr 2013 18:17:41 +0100 Subject: cifs: Allow passwords which begin with a delimitor Fixes a regression in cifs_parse_mount_options where a password which begins with a delimitor is parsed incorrectly as being a blank password. Signed-off-by: Sachin Prabhu Acked-by: Jeff Layton Cc: Signed-off-by: Steve French --- fs/cifs/connect.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 991c63c6bdd0..21b3a291c327 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1575,14 +1575,24 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, } break; case Opt_blank_pass: - vol->password = NULL; - break; - case Opt_pass: /* passwords have to be handled differently * to allow the character used for deliminator * to be passed within them */ + /* + * Check if this is a case where the password + * starts with a delimiter + */ + tmp_end = strchr(data, '='); + tmp_end++; + if (!(tmp_end < end && tmp_end[1] == delim)) { + /* No it is not. Set the password to NULL */ + vol->password = NULL; + break; + } + /* Yes it is. Drop down to Opt_pass below.*/ + case Opt_pass: /* Obtain the value string */ value = strchr(data, '='); value++; -- cgit v1.2.1 From f76cfa3c2496c462b5bc01bd0c9340c2715b73ca Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Wed, 10 Apr 2013 15:28:25 +0200 Subject: x86/mm/cpa: Convert noop to functional fix Commit: a8aed3e0752b ("x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge") introduced a valid fix but one location that didn't trigger the bug that lead to finding those (small) problems, wasn't updated using the right variable. The wrong variable was also initialized for no good reason, that may have been the source of the confusion. Remove the noop initialization accordingly. Commit a8aed3e0752b also erroneously removed one canon_pgprot pass meant to clear pmd bitflags not supported in hardware by older CPUs, that automatically gets corrected by this patch too by applying it to the right variable in the new location. Reported-by: Stefan Bader Signed-off-by: Andrea Arcangeli Acked-by: Borislav Petkov Cc: Andy Whitcroft Cc: Mel Gorman Link: http://lkml.kernel.org/r/1365600505-19314-1-git-send-email-aarcange@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 091934e1d0d9..7896f7190fda 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -467,7 +467,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, * We are safe now. Check whether the new pgprot is the same: */ old_pte = *kpte; - old_prot = new_prot = req_prot = pte_pgprot(old_pte); + old_prot = req_prot = pte_pgprot(old_pte); pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr); pgprot_val(req_prot) |= pgprot_val(cpa->mask_set); @@ -478,12 +478,12 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, * a non present pmd. The canon_pgprot will clear _PAGE_GLOBAL * for the ancient hardware that doesn't support it. */ - if (pgprot_val(new_prot) & _PAGE_PRESENT) - pgprot_val(new_prot) |= _PAGE_PSE | _PAGE_GLOBAL; + if (pgprot_val(req_prot) & _PAGE_PRESENT) + pgprot_val(req_prot) |= _PAGE_PSE | _PAGE_GLOBAL; else - pgprot_val(new_prot) &= ~(_PAGE_PSE | _PAGE_GLOBAL); + pgprot_val(req_prot) &= ~(_PAGE_PSE | _PAGE_GLOBAL); - new_prot = canon_pgprot(new_prot); + req_prot = canon_pgprot(req_prot); /* * old_pte points to the large page base address. So we need -- cgit v1.2.1 From f6da51c3ef07c593a410551af4cad093e2fbe755 Mon Sep 17 00:00:00 2001 From: Asias He Date: Wed, 10 Apr 2013 15:06:13 +0800 Subject: tcm_vhost: Remove double check of response We did the length of response check twice. Signed-off-by: Asias He Acked-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index c127731b4230..28c112f23830 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -705,15 +705,6 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, tv_cmd->tvc_vhost = vs; tv_cmd->tvc_vq = vq; - - if (unlikely(vq->iov[out].iov_len != - sizeof(struct virtio_scsi_cmd_resp))) { - vq_err(vq, "Expecting virtio_scsi_cmd_resp, got %zu" - " bytes, out: %d, in: %d\n", - vq->iov[out].iov_len, out, in); - break; - } - tv_cmd->tvc_resp = vq->iov[out].iov_base; /* -- cgit v1.2.1 From 7ea206cf3b06704cf2bfc9c9c395094b24dc44a2 Mon Sep 17 00:00:00 2001 From: Asias He Date: Wed, 10 Apr 2013 15:06:14 +0800 Subject: tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq If we fail to submit the allocated tv_vmd to tcm_vhost_submission_work, we will leak the tv_vmd. Free tv_vmd on fail path. Signed-off-by: Asias He Acked-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 28c112f23830..210d59e222fc 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -724,7 +724,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", scsi_command_size(tv_cmd->tvc_cdb), TCM_VHOST_MAX_CDB_SIZE); - break; /* TODO */ + goto err; } tv_cmd->tvc_lun = ((v_req.lun[2] << 8) | v_req.lun[3]) & 0x3FFF; @@ -737,7 +737,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, data_direction == DMA_TO_DEVICE); if (unlikely(ret)) { vq_err(vq, "Failed to map iov to sgl\n"); - break; /* TODO */ + goto err; } } @@ -758,6 +758,11 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, } mutex_unlock(&vq->mutex); + return; + +err: + vhost_scsi_free_cmd(tv_cmd); + mutex_unlock(&vq->mutex); } static void vhost_scsi_ctl_handle_kick(struct vhost_work *work) -- cgit v1.2.1 From 637ab21e284f4e9188acc2746695f7f6452b4a22 Mon Sep 17 00:00:00 2001 From: Asias He Date: Wed, 10 Apr 2013 15:06:15 +0800 Subject: tcm_vhost: Add vhost_scsi_send_bad_target() helper Share the send bad target code with other use cases. Signed-off-by: Asias He Acked-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 210d59e222fc..1bb0fb4950d1 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -578,6 +578,23 @@ static void tcm_vhost_submission_work(struct work_struct *work) } } +static void vhost_scsi_send_bad_target(struct vhost_scsi *vs, + struct vhost_virtqueue *vq, int head, unsigned out) +{ + struct virtio_scsi_cmd_resp __user *resp; + struct virtio_scsi_cmd_resp rsp; + int ret; + + memset(&rsp, 0, sizeof(rsp)); + rsp.response = VIRTIO_SCSI_S_BAD_TARGET; + resp = vq->iov[out].iov_base; + ret = __copy_to_user(resp, &rsp, sizeof(rsp)); + if (!ret) + vhost_add_used_and_signal(&vs->dev, vq, head, 0); + else + pr_err("Faulted on virtio_scsi_cmd_resp\n"); +} + static void vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq) { @@ -673,19 +690,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, /* Target does not exist, fail the request */ if (unlikely(!tv_tpg)) { - struct virtio_scsi_cmd_resp __user *resp; - struct virtio_scsi_cmd_resp rsp; - - memset(&rsp, 0, sizeof(rsp)); - rsp.response = VIRTIO_SCSI_S_BAD_TARGET; - resp = vq->iov[out].iov_base; - ret = __copy_to_user(resp, &rsp, sizeof(rsp)); - if (!ret) - vhost_add_used_and_signal(&vs->dev, - vq, head, 0); - else - pr_err("Faulted on virtio_scsi_cmd_resp\n"); - + vhost_scsi_send_bad_target(vs, vq, head, out); continue; } -- cgit v1.2.1 From 055f648c49d948de9452b0f1758869bbbd0097b8 Mon Sep 17 00:00:00 2001 From: Asias He Date: Wed, 10 Apr 2013 15:06:16 +0800 Subject: tcm_vhost: Send bad target to guest when cmd fails Send bad target to guest in case: 1) we can not allocate the cmd 2) fail to submit the cmd Signed-off-by: Asias He Acked-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 1bb0fb4950d1..957a0b98a5d9 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -703,7 +703,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, if (IS_ERR(tv_cmd)) { vq_err(vq, "vhost_scsi_allocate_cmd failed %ld\n", PTR_ERR(tv_cmd)); - break; + goto err_cmd; } pr_debug("Allocated tv_cmd: %p exp_data_len: %d, data_direction" ": %d\n", tv_cmd, exp_data_len, data_direction); @@ -729,7 +729,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", scsi_command_size(tv_cmd->tvc_cdb), TCM_VHOST_MAX_CDB_SIZE); - goto err; + goto err_free; } tv_cmd->tvc_lun = ((v_req.lun[2] << 8) | v_req.lun[3]) & 0x3FFF; @@ -742,7 +742,7 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, data_direction == DMA_TO_DEVICE); if (unlikely(ret)) { vq_err(vq, "Failed to map iov to sgl\n"); - goto err; + goto err_free; } } @@ -765,8 +765,10 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs, mutex_unlock(&vq->mutex); return; -err: +err_free: vhost_scsi_free_cmd(tv_cmd); +err_cmd: + vhost_scsi_send_bad_target(vs, vq, head, out); mutex_unlock(&vq->mutex); } -- cgit v1.2.1 From 30f359a6f9da65a66de8cadf959f0f4a0d498bba Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 10 Apr 2013 15:00:27 -0700 Subject: target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs This patch fixes a bug where a handful of informational / control CDBs that should be allowed during ALUA access state Standby/Offline/Transition where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*. This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN registration when LUN scanning occured during these ALUA access states. Cc: Hannes Reinecke Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index ff1c5ee352cb..cbe48ab41745 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -409,6 +409,7 @@ static inline int core_alua_state_standby( case REPORT_LUNS: case RECEIVE_DIAGNOSTIC: case SEND_DIAGNOSTIC: + return 0; case MAINTENANCE_IN: switch (cdb[1] & 0x1f) { case MI_REPORT_TARGET_PGS: @@ -451,6 +452,7 @@ static inline int core_alua_state_unavailable( switch (cdb[0]) { case INQUIRY: case REPORT_LUNS: + return 0; case MAINTENANCE_IN: switch (cdb[1] & 0x1f) { case MI_REPORT_TARGET_PGS: @@ -491,6 +493,7 @@ static inline int core_alua_state_transition( switch (cdb[0]) { case INQUIRY: case REPORT_LUNS: + return 0; case MAINTENANCE_IN: switch (cdb[1] & 0x1f) { case MI_REPORT_TARGET_PGS: -- cgit v1.2.1 From e7a7f972f9120a7985d38a2be8c540047c94392f Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 3 Apr 2013 19:40:14 +0200 Subject: gpio: pca953x: fix irq_domain_add_simple usage We actually have to pass chip as the host_data parameter of irq_domain_add_simple() as later on, it is used to initialize chip_data in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer dereference after calling irq_data_get_irq_chip_data() in pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(), pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type(). Fixes regression introduced by commit 0e8f2fdacf1d44651aa7e57063c76142d1f4988b (gpio: pca953x: use simple irqdomain) Signed-off-by: Alexandre Belloni Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/gpio/gpio-pca953x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 24059462c87f..9391cf16e990 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -575,7 +575,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, chip->gpio_chip.ngpio, irq_base, &pca953x_irq_simple_ops, - NULL); + chip); if (!chip->domain) return -ENODEV; -- cgit v1.2.1 From 5a25bf36b7394f11f2ff90c9e203639cd3dc041a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 2 Dec 2012 08:33:24 -0500 Subject: [SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put() The dereference to 'put_index' should be moved below the NULL test. Signed-off-by: Wei Yongjun Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_sli.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 74b67d98e952..d43faf34c1e2 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -438,11 +438,12 @@ lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq, struct lpfc_rqe *temp_hrqe; struct lpfc_rqe *temp_drqe; struct lpfc_register doorbell; - int put_index = hq->host_index; + int put_index; /* sanity check on queue memory */ if (unlikely(!hq) || unlikely(!dq)) return -ENOMEM; + put_index = hq->host_index; temp_hrqe = hq->qe[hq->host_index].rqe; temp_drqe = dq->qe[dq->host_index].rqe; -- cgit v1.2.1 From 1baee58638fc58248625255f5c5fcdb987f11b1f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 12 Apr 2013 13:25:20 +1000 Subject: udl: handle EDID failure properly. Don't oops seems proper. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_connector.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c index fe5cdbcf2636..b44d548c56f8 100644 --- a/drivers/gpu/drm/udl/udl_connector.c +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -61,6 +61,10 @@ static int udl_get_modes(struct drm_connector *connector) int ret; edid = (struct edid *)udl_get_edid(udl); + if (!edid) { + drm_mode_connector_update_edid_property(connector, NULL); + return 0; + } /* * We only read the main block, but if the monitor reports extension -- cgit v1.2.1 From 89ced125472b8551c65526934b7f6c733a6864fa Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 11 Apr 2013 14:26:55 +0000 Subject: drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event Driver's and ->fill_modes functions are allowed to grab crtc mutexes (for e.g. load detect). Hence we need to first only grab the general kms mutex, and only in a second step grab all locks to do the modesets. This prevents a deadlock on my gm45 in the tv load detect code called by drm_helper_probe_single_connector_modes. Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 59d6b9bf204b..892ff9f95975 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1544,10 +1544,10 @@ int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper) if (!fb_helper->fb) return 0; - drm_modeset_lock_all(dev); + mutex_lock(&fb_helper->dev->mode_config.mutex); if (!drm_fb_helper_is_bound(fb_helper)) { fb_helper->delayed_hotplug = true; - drm_modeset_unlock_all(dev); + mutex_unlock(&fb_helper->dev->mode_config.mutex); return 0; } DRM_DEBUG_KMS("\n"); @@ -1558,9 +1558,11 @@ int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper) count = drm_fb_helper_probe_connector_modes(fb_helper, max_width, max_height); + mutex_unlock(&fb_helper->dev->mode_config.mutex); + + drm_modeset_lock_all(dev); drm_setup_crtcs(fb_helper); drm_modeset_unlock_all(dev); - drm_fb_helper_set_par(fb_helper->fbdev); return 0; -- cgit v1.2.1 From c481420248c6730246d2a1b1773d5d7007ae0835 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 12 Apr 2013 11:05:54 +0800 Subject: perf: Fix error return code Fix to return -ENOMEM in the allocation error case instead of 0 (if pmu_bus_running == 1), as done elsewhere in this function. Signed-off-by: Wei Yongjun Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/CAPgLHd8j_fWcgqe%3DKLWjpBj%2B%3Do0Pw6Z-SEq%3DNTPU08c2w1tngQ@mail.gmail.com [ Tweaked the error code setting placement and the changelog. ] Signed-off-by: Ingo Molnar --- kernel/events/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index 7f0d67ea3f48..7e0962ed7f8a 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -5987,6 +5987,7 @@ skip_type: if (pmu->pmu_cpu_context) goto got_cpu_context; + ret = -ENOMEM; pmu->pmu_cpu_context = alloc_percpu(struct perf_cpu_context); if (!pmu->pmu_cpu_context) goto free_dev; -- cgit v1.2.1 From 18699739b60cb60230153ff5475b2ba92be185f9 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Thu, 11 Apr 2013 15:36:09 +0200 Subject: x86/mm/cpa/selftest: Fix false positive in CPA self test If the pmd is not present, _PAGE_PSE will not be set anymore. Fix the false positive. Reported-by: Ingo Molnar Signed-off-by: Andrea Arcangeli Cc: Stefan Bader Cc: Andy Whitcroft Cc: Mel Gorman Cc: Borislav Petkov Link: http://lkml.kernel.org/r/1365687369-30802-1-git-send-email-aarcange@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c index b0086567271c..0e38951e65eb 100644 --- a/arch/x86/mm/pageattr-test.c +++ b/arch/x86/mm/pageattr-test.c @@ -68,7 +68,7 @@ static int print_split(struct split_state *s) s->gpg++; i += GPS/PAGE_SIZE; } else if (level == PG_LEVEL_2M) { - if (!(pte_val(*pte) & _PAGE_PSE)) { + if ((pte_val(*pte) & _PAGE_PRESENT) && !(pte_val(*pte) & _PAGE_PSE)) { printk(KERN_ERR "%lx level %d but not PSE %Lx\n", addr, level, (u64)pte_val(*pte)); -- cgit v1.2.1 From 26564600c9e88c6572a5e6ef5ae9121907edfb7f Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Thu, 11 Apr 2013 13:59:52 -0400 Subject: x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set When CONFIG_DEBUG_PAGEALLOC is set page table updates made by kernel_map_pages() are not made visible (via TLB flush) immediately if lazy MMU is on. In environments that support lazy MMU (e.g. Xen) this may lead to fatal page faults, for example, when zap_pte_range() needs to allocate pages in __tlb_remove_page() -> tlb_next_batch(). Signed-off-by: Boris Ostrovsky Cc: konrad.wilk@oracle.com Link: http://lkml.kernel.org/r/1365703192-2089-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 7896f7190fda..fb4e73ec24d8 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -1413,6 +1413,8 @@ void kernel_map_pages(struct page *page, int numpages, int enable) * but that can deadlock->flush only current cpu: */ __flush_tlb_all(); + + arch_flush_lazy_mmu_mode(); } #ifdef CONFIG_HIBERNATION -- cgit v1.2.1 From b02e48f2f8755e51fe8ce246988a29bd96f6b85e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 12 Apr 2013 11:39:57 +0100 Subject: MAINTAINERS: Update e-mail address Update the e-mail address I use for subsystems. Signed-off-by: Mark Brown --- MAINTAINERS | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 836a6183c37f..c6108c319db9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6625,7 +6625,7 @@ S: Supported F: fs/reiserfs/ REGISTER MAP ABSTRACTION -M: Mark Brown +M: Mark Brown T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git S: Supported F: drivers/base/regmap/ @@ -7374,7 +7374,7 @@ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) M: Liam Girdwood -M: Mark Brown +M: Mark Brown T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC @@ -7463,7 +7463,7 @@ F: drivers/clk/spear/ SPI SUBSYSTEM M: Grant Likely -M: Mark Brown +M: Mark Brown L: spi-devel-general@lists.sourceforge.net Q: http://patchwork.kernel.org/project/spi-devel-general/list/ T: git git://git.secretlab.ca/git/linux-2.6.git @@ -8708,7 +8708,7 @@ F: drivers/scsi/vmw_pvscsi.h VOLTAGE AND CURRENT REGULATOR FRAMEWORK M: Liam Girdwood -M: Mark Brown +M: Mark Brown W: http://opensource.wolfsonmicro.com/node/15 W: http://www.slimlogic.co.uk/?p=48 T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/regulator.git -- cgit v1.2.1 From 6a76f8c0ab19f215af2a3442870eeb5f0e81998d Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 11 Apr 2013 15:55:01 +0900 Subject: tracing: Fix possible NULL pointer dereferences Currently set_ftrace_pid and set_graph_function files use seq_lseek for their fops. However seq_open() is called only for FMODE_READ in the fops->open() so that if an user tries to seek one of those file when she open it for writing, it sees NULL seq_file and then panic. It can be easily reproduced with following command: $ cd /sys/kernel/debug/tracing $ echo 1234 | sudo tee -a set_ftrace_pid In this example, GNU coreutils' tee opens the file with fopen(, "a") and then the fopen() internally calls lseek(). Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Namhyung Kim Cc: stable@vger.kernel.org Signed-off-by: Namhyung Kim Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 2 +- kernel/trace/ftrace.c | 10 +++++----- kernel/trace/trace_stack.c | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 167abf907802..eb3ce327b975 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -396,7 +396,7 @@ ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos); ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos); -loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int whence); +loff_t ftrace_filter_lseek(struct file *file, loff_t offset, int whence); int ftrace_regex_release(struct inode *inode, struct file *file); void __init diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 926ebfb74936..affc35d829cc 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2697,7 +2697,7 @@ ftrace_notrace_open(struct inode *inode, struct file *file) } loff_t -ftrace_regex_lseek(struct file *file, loff_t offset, int whence) +ftrace_filter_lseek(struct file *file, loff_t offset, int whence) { loff_t ret; @@ -3570,7 +3570,7 @@ static const struct file_operations ftrace_filter_fops = { .open = ftrace_filter_open, .read = seq_read, .write = ftrace_filter_write, - .llseek = ftrace_regex_lseek, + .llseek = ftrace_filter_lseek, .release = ftrace_regex_release, }; @@ -3578,7 +3578,7 @@ static const struct file_operations ftrace_notrace_fops = { .open = ftrace_notrace_open, .read = seq_read, .write = ftrace_notrace_write, - .llseek = ftrace_regex_lseek, + .llseek = ftrace_filter_lseek, .release = ftrace_regex_release, }; @@ -3783,8 +3783,8 @@ static const struct file_operations ftrace_graph_fops = { .open = ftrace_graph_open, .read = seq_read, .write = ftrace_graph_write, + .llseek = ftrace_filter_lseek, .release = ftrace_graph_release, - .llseek = seq_lseek, }; #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ @@ -4439,7 +4439,7 @@ static const struct file_operations ftrace_pid_fops = { .open = ftrace_pid_open, .write = ftrace_pid_write, .read = seq_read, - .llseek = seq_lseek, + .llseek = ftrace_filter_lseek, .release = ftrace_pid_release, }; diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c index 42ca822fc701..83a8b5b7bd35 100644 --- a/kernel/trace/trace_stack.c +++ b/kernel/trace/trace_stack.c @@ -322,7 +322,7 @@ static const struct file_operations stack_trace_filter_fops = { .open = stack_trace_filter_open, .read = seq_read, .write = ftrace_filter_write, - .llseek = ftrace_regex_lseek, + .llseek = ftrace_filter_lseek, .release = ftrace_regex_release, }; -- cgit v1.2.1 From 7f49ef69db6bbf756c0abca7e9b65b32e999eec8 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Fri, 12 Apr 2013 16:40:13 -0400 Subject: ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the ftrace_pid_fops is defined when DYNAMIC_FTRACE is not. Cc: stable@vger.kernel.org Cc: Namhyung Kim Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 3 ++- kernel/trace/ftrace.c | 28 ++++++++++++++-------------- 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index eb3ce327b975..52da2a250795 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -396,7 +396,6 @@ ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos); ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos); -loff_t ftrace_filter_lseek(struct file *file, loff_t offset, int whence); int ftrace_regex_release(struct inode *inode, struct file *file); void __init @@ -569,6 +568,8 @@ static inline int ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; } #endif /* CONFIG_DYNAMIC_FTRACE */ +loff_t ftrace_filter_lseek(struct file *file, loff_t offset, int whence); + /* totally disable ftrace - can not re-enable after this */ void ftrace_kill(void); diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index affc35d829cc..2461ede45a8d 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1052,6 +1052,19 @@ static __init void ftrace_profile_debugfs(struct dentry *d_tracer) static struct pid * const ftrace_swapper_pid = &init_struct_pid; +loff_t +ftrace_filter_lseek(struct file *file, loff_t offset, int whence) +{ + loff_t ret; + + if (file->f_mode & FMODE_READ) + ret = seq_lseek(file, offset, whence); + else + file->f_pos = ret = 1; + + return ret; +} + #ifdef CONFIG_DYNAMIC_FTRACE #ifndef CONFIG_FTRACE_MCOUNT_RECORD @@ -2612,7 +2625,7 @@ static void ftrace_filter_reset(struct ftrace_hash *hash) * routine, you can use ftrace_filter_write() for the write * routine if @flag has FTRACE_ITER_FILTER set, or * ftrace_notrace_write() if @flag has FTRACE_ITER_NOTRACE set. - * ftrace_regex_lseek() should be used as the lseek routine, and + * ftrace_filter_lseek() should be used as the lseek routine, and * release must call ftrace_regex_release(). */ int @@ -2696,19 +2709,6 @@ ftrace_notrace_open(struct inode *inode, struct file *file) inode, file); } -loff_t -ftrace_filter_lseek(struct file *file, loff_t offset, int whence) -{ - loff_t ret; - - if (file->f_mode & FMODE_READ) - ret = seq_lseek(file, offset, whence); - else - file->f_pos = ret = 1; - - return ret; -} - static int ftrace_match(char *str, char *regex, int len, int type) { int matched = 0; -- cgit v1.2.1 From 1de14c3c5cbc9bb17e9dcc648cda51c0c85d54b9 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Fri, 12 Apr 2013 16:23:54 -0700 Subject: x86-32: Fix possible incomplete TLB invalidate with PAE pagetables This patch attempts to fix: https://bugzilla.kernel.org/show_bug.cgi?id=56461 The symptom is a crash and messages like this: chrome: Corrupted page table at address 34a03000 *pdpt = 0000000000000000 *pde = 0000000000000000 Bad pagetable: 000f [#1] PREEMPT SMP Ingo guesses this got introduced by commit 611ae8e3f520 ("x86/tlb: enable tlb flush range support for x86") since that code started to free unused pagetables. On x86-32 PAE kernels, that new code has the potential to free an entire PMD page and will clear one of the four page-directory-pointer-table (aka pgd_t entries). The hardware aggressively "caches" these top-level entries and invlpg does not actually affect the CPU's copy. If we clear one we *HAVE* to do a full TLB flush, otherwise we might continue using a freed pmd page. (note, we do this properly on the population side in pud_populate()). This patch tracks whenever we clear one of these entries in the 'struct mmu_gather', and ensures that we follow up with a full tlb flush. BTW, I disassembled and checked that: if (tlb->fullmm == 0) and if (!tlb->fullmm && !tlb->need_flush_all) generate essentially the same code, so there should be zero impact there to the !PAE case. Signed-off-by: Dave Hansen Cc: Peter Anvin Cc: Ingo Molnar Cc: Artem S Tashkinov Signed-off-by: Linus Torvalds --- arch/x86/include/asm/tlb.h | 2 +- arch/x86/mm/pgtable.c | 7 +++++++ include/asm-generic/tlb.h | 7 ++++++- mm/memory.c | 1 + 4 files changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/tlb.h b/arch/x86/include/asm/tlb.h index 4fef20773b8f..c7797307fc2b 100644 --- a/arch/x86/include/asm/tlb.h +++ b/arch/x86/include/asm/tlb.h @@ -7,7 +7,7 @@ #define tlb_flush(tlb) \ { \ - if (tlb->fullmm == 0) \ + if (!tlb->fullmm && !tlb->need_flush_all) \ flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end, 0UL); \ else \ flush_tlb_mm_range(tlb->mm, 0UL, TLB_FLUSH_ALL, 0UL); \ diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 193350b51f90..17fda6a8b3c2 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -58,6 +58,13 @@ void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte) void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) { paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT); + /* + * NOTE! For PAE, any changes to the top page-directory-pointer-table + * entries need a full cr3 reload to flush. + */ +#ifdef CONFIG_X86_PAE + tlb->need_flush_all = 1; +#endif tlb_remove_page(tlb, virt_to_page(pmd)); } diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index 25f01d0bc149..b1b1fa6ffffe 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -99,7 +99,12 @@ struct mmu_gather { unsigned int need_flush : 1, /* Did free PTEs */ fast_mode : 1; /* No batching */ - unsigned int fullmm; + /* we are in the middle of an operation to clear + * a full mm and can make some optimizations */ + unsigned int fullmm : 1, + /* we have performed an operation which + * requires a complete flush of the tlb */ + need_flush_all : 1; struct mmu_gather_batch *active; struct mmu_gather_batch local; diff --git a/mm/memory.c b/mm/memory.c index 494526ae024a..13cbc420fead 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -216,6 +216,7 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm) tlb->mm = mm; tlb->fullmm = fullmm; + tlb->need_flush_all = 0; tlb->start = -1UL; tlb->end = 0; tlb->need_flush = 0; -- cgit v1.2.1 From 4bc4bee4595662d8bff92180d5c32e3313a704b0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 5 Apr 2013 20:50:09 +0000 Subject: Btrfs: make sure nbytes are right after log replay While trying to track down a tree log replay bug I noticed that fsck was always complaining about nbytes not being right for our fsynced file. That is because the new fsync stuff doesn't wait for ordered extents to complete, so the inodes nbytes are not necessarily updated properly when we log it. So to fix this we need to set nbytes to whatever it is on the inode that is on disk, so when we replay the extents we can just add the bytes that are being added as we replay the extent. This makes it work for the case that we have the wrong nbytes or the case that we logged everything and nbytes is actually correct. With this I'm no longer getting nbytes errors out of btrfsck. Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/tree-log.c | 48 ++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 451fad96ecd1..ef96381569a4 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -317,6 +317,7 @@ static noinline int overwrite_item(struct btrfs_trans_handle *trans, unsigned long src_ptr; unsigned long dst_ptr; int overwrite_root = 0; + bool inode_item = key->type == BTRFS_INODE_ITEM_KEY; if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) overwrite_root = 1; @@ -326,6 +327,9 @@ static noinline int overwrite_item(struct btrfs_trans_handle *trans, /* look for the key in the destination tree */ ret = btrfs_search_slot(NULL, root, key, path, 0, 0); + if (ret < 0) + return ret; + if (ret == 0) { char *src_copy; char *dst_copy; @@ -367,6 +371,30 @@ static noinline int overwrite_item(struct btrfs_trans_handle *trans, return 0; } + /* + * We need to load the old nbytes into the inode so when we + * replay the extents we've logged we get the right nbytes. + */ + if (inode_item) { + struct btrfs_inode_item *item; + u64 nbytes; + + item = btrfs_item_ptr(path->nodes[0], path->slots[0], + struct btrfs_inode_item); + nbytes = btrfs_inode_nbytes(path->nodes[0], item); + item = btrfs_item_ptr(eb, slot, + struct btrfs_inode_item); + btrfs_set_inode_nbytes(eb, item, nbytes); + } + } else if (inode_item) { + struct btrfs_inode_item *item; + + /* + * New inode, set nbytes to 0 so that the nbytes comes out + * properly when we replay the extents. + */ + item = btrfs_item_ptr(eb, slot, struct btrfs_inode_item); + btrfs_set_inode_nbytes(eb, item, 0); } insert: btrfs_release_path(path); @@ -486,7 +514,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, int found_type; u64 extent_end; u64 start = key->offset; - u64 saved_nbytes; + u64 nbytes = 0; struct btrfs_file_extent_item *item; struct inode *inode = NULL; unsigned long size; @@ -496,10 +524,19 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, found_type = btrfs_file_extent_type(eb, item); if (found_type == BTRFS_FILE_EXTENT_REG || - found_type == BTRFS_FILE_EXTENT_PREALLOC) - extent_end = start + btrfs_file_extent_num_bytes(eb, item); - else if (found_type == BTRFS_FILE_EXTENT_INLINE) { + found_type == BTRFS_FILE_EXTENT_PREALLOC) { + nbytes = btrfs_file_extent_num_bytes(eb, item); + extent_end = start + nbytes; + + /* + * We don't add to the inodes nbytes if we are prealloc or a + * hole. + */ + if (btrfs_file_extent_disk_bytenr(eb, item) == 0) + nbytes = 0; + } else if (found_type == BTRFS_FILE_EXTENT_INLINE) { size = btrfs_file_extent_inline_len(eb, item); + nbytes = btrfs_file_extent_ram_bytes(eb, item); extent_end = ALIGN(start + size, root->sectorsize); } else { ret = 0; @@ -548,7 +585,6 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, } btrfs_release_path(path); - saved_nbytes = inode_get_bytes(inode); /* drop any overlapping extents */ ret = btrfs_drop_extents(trans, root, inode, start, extent_end, 1); BUG_ON(ret); @@ -635,7 +671,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, BUG_ON(ret); } - inode_set_bytes(inode, saved_nbytes); + inode_add_bytes(inode, nbytes); ret = btrfs_update_inode(trans, root, inode); out: if (inode) -- cgit v1.2.1 From a49b7e82cab0f9b41f483359be83f44fbb6b4979 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 13 Apr 2013 15:15:30 -0700 Subject: kobject: fix kset_find_obj() race with concurrent last kobject_put() Anatol Pomozov identified a race condition that hits module unloading and re-loading. To quote Anatol: "This is a race codition that exists between kset_find_obj() and kobject_put(). kset_find_obj() might return kobject that has refcount equal to 0 if this kobject is freeing by kobject_put() in other thread. Here is timeline for the crash in case if kset_find_obj() searches for an object tht nobody holds and other thread is doing kobject_put() on the same kobject: THREAD A (calls kset_find_obj()) THREAD B (calls kobject_put()) splin_lock() atomic_dec_return(kobj->kref), counter gets zero here ... starts kobject cleanup .... spin_lock() // WAIT thread A in kobj_kset_leave() iterate over kset->list atomic_inc(kobj->kref) (counter becomes 1) spin_unlock() spin_lock() // taken // it does not know that thread A increased counter so it remove obj from list spin_unlock() vfree(module) // frees module object with containing kobj // kobj points to freed memory area!! kobject_put(kobj) // OOPS!!!! The race above happens because module.c tries to use kset_find_obj() when somebody unloads module. The module.c code was introduced in commit 6494a93d55fa" Anatol supplied a patch specific for module.c that worked around the problem by simply not using kset_find_obj() at all, but rather than make a local band-aid, this just fixes kset_find_obj() to be thread-safe using the proper model of refusing the get a new reference if the refcount has already dropped to zero. See examples of this proper refcount handling not only in the kref documentation, but in various other equivalent uses of this pattern by grepping for atomic_inc_not_zero(). [ Side note: the module race does indicate that module loading and unloading is not properly serialized wrt sysfs information using the module mutex. That may require further thought, but this is the correct fix at the kobject layer regardless. ] Reported-analyzed-and-tested-by: Anatol Pomozov Cc: Greg Kroah-Hartman Cc: Al Viro Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- lib/kobject.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/lib/kobject.c b/lib/kobject.c index e07ee1fcd6f1..a65486613d79 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -529,6 +529,13 @@ struct kobject *kobject_get(struct kobject *kobj) return kobj; } +static struct kobject *kobject_get_unless_zero(struct kobject *kobj) +{ + if (!kref_get_unless_zero(&kobj->kref)) + kobj = NULL; + return kobj; +} + /* * kobject_cleanup - free kobject resources. * @kobj: object to cleanup @@ -751,7 +758,7 @@ struct kobject *kset_find_obj(struct kset *kset, const char *name) list_for_each_entry(k, &kset->list, entry) { if (kobject_name(k) && !strcmp(kobject_name(k), name)) { - ret = kobject_get(k); + ret = kobject_get_unless_zero(k); break; } } -- cgit v1.2.1 From 5b55d708335a9e3e4f61f2dadf7511502205ccd1 Mon Sep 17 00:00:00 2001 From: Suleiman Souhlal Date: Sat, 13 Apr 2013 16:03:06 -0700 Subject: vfs: Revert spurious fix to spinning prevention in prune_icache_sb Revert commit 62a3ddef6181 ("vfs: fix spinning prevention in prune_icache_sb"). This commit doesn't look right: since we are looking at the tail of the list (sb->s_inode_lru.prev) if we want to skip an inode, we should put it back at the head of the list instead of the tail, otherwise we will keep spinning on it. Discovered when investigating why prune_icache_sb came top in perf reports of a swapping load. Signed-off-by: Suleiman Souhlal Signed-off-by: Hugh Dickins Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Linus Torvalds --- fs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/inode.c b/fs/inode.c index f5f7c06c36fb..a898b3d43ccf 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -725,7 +725,7 @@ void prune_icache_sb(struct super_block *sb, int nr_to_scan) * inode to the back of the list so we don't spin on it. */ if (!spin_trylock(&inode->i_lock)) { - list_move_tail(&inode->i_lru, &sb->s_inode_lru); + list_move(&inode->i_lru, &sb->s_inode_lru); continue; } -- cgit v1.2.1 From 09549cd01726a7ff8b102a93e46b059531583ab6 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 10 Apr 2013 14:36:22 +0200 Subject: watchdog: Revert the AT91RM9200_WATCHDOG dependency Compiling the at91rm9200_wdt.c driver without at91rm9200 support was leading to several errors: drivers/built-in.o: In function `at91_wdt_close': at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91_wdt_write': at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91wdt_shutdown': at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91wdt_suspend': at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91_wdt_open': at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base' drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to `at91_st_base' follow So, reverting the modification of the "depends" Kconfig line introduced by patch a6a1bcd37 (watchdog: at91rm9200: add DT support) seems to be the good solution. Signed-off-by: Nicolas Ferre Acked-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 9fcc70c11cea..e89fc3133972 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -117,7 +117,7 @@ config ARM_SP805_WATCHDOG config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" - depends on ARCH_AT91 + depends on ARCH_AT91RM9200 help Watchdog timer embedded into AT91RM9200 chips. This will reboot your system when the timeout is reached. -- cgit v1.2.1 From 935d8aabd4331f47a89c3e1daa5779d23cf244ee Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 14 Apr 2013 10:06:31 -0700 Subject: Add file_ns_capable() helper function for open-time capability checking Nothing is using it yet, but this will allow us to delay the open-time checks to use time, without breaking the normal UNIX permission semantics where permissions are determined by the opener (and the file descriptor can then be passed to a different process, or the process can drop capabilities). Signed-off-by: Linus Torvalds --- include/linux/capability.h | 2 ++ kernel/capability.c | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/include/linux/capability.h b/include/linux/capability.h index 98503b792369..d9a4f7f40f32 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -35,6 +35,7 @@ struct cpu_vfs_cap_data { #define _KERNEL_CAP_T_SIZE (sizeof(kernel_cap_t)) +struct file; struct inode; struct dentry; struct user_namespace; @@ -211,6 +212,7 @@ extern bool capable(int cap); extern bool ns_capable(struct user_namespace *ns, int cap); extern bool nsown_capable(int cap); extern bool inode_capable(const struct inode *inode, int cap); +extern bool file_ns_capable(const struct file *file, struct user_namespace *ns, int cap); /* audit system wants to get cap info from files as well */ extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps); diff --git a/kernel/capability.c b/kernel/capability.c index 493d97259484..f6c2ce5701e1 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -392,6 +392,30 @@ bool ns_capable(struct user_namespace *ns, int cap) } EXPORT_SYMBOL(ns_capable); +/** + * file_ns_capable - Determine if the file's opener had a capability in effect + * @file: The file we want to check + * @ns: The usernamespace we want the capability in + * @cap: The capability to be tested for + * + * Return true if task that opened the file had a capability in effect + * when the file was opened. + * + * This does not set PF_SUPERPRIV because the caller may not + * actually be privileged. + */ +bool file_ns_capable(const struct file *file, struct user_namespace *ns, int cap) +{ + if (WARN_ON_ONCE(!cap_valid(cap))) + return false; + + if (security_capable(file->f_cred, ns, cap) == 0) + return true; + + return false; +} +EXPORT_SYMBOL(file_ns_capable); + /** * capable - Determine if the current task has a superior capability in effect * @cap: The capability to be tested for -- cgit v1.2.1 From 41ef2d5678d83af030125550329b6ae8b74618fa Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 14 Apr 2013 17:45:16 -0700 Subject: Linux 3.9-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6db672b15bda..9cf6783c2ec3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v1.2.1