From 08aa5e7da6bce1a1963f63cf32c2e7ad434ad578 Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Tue, 9 Jul 2019 05:37:12 +0300 Subject: net/mlx5: Use reversed order when unregister devices When lag is active, which is controlled by the bonded mlx5e netdev, mlx5 interface unregestering must happen in the reverse order where rdma is unregistered (unloaded) first, to guarantee all references to the lag context in hardware is removed, then remove mlx5e netdev interface which will cleanup the lag context from hardware. Without this fix during destroy of LAG interface, we observed following errors: * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xe4ac33) * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa5aee8). Fixes: a31208b1e11d ("net/mlx5_core: New init and exit flow for mlx5_core") Reviewed-by: Parav Pandit Reviewed-by: Leon Romanovsky Signed-off-by: Mark Zhang Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c index 5bb6a26ea267..50862275544e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c @@ -213,7 +213,7 @@ void mlx5_unregister_device(struct mlx5_core_dev *dev) struct mlx5_interface *intf; mutex_lock(&mlx5_intf_mutex); - list_for_each_entry(intf, &intf_list, list) + list_for_each_entry_reverse(intf, &intf_list, list) mlx5_remove_device(intf, priv); list_del(&priv->dev_list); mutex_unlock(&mlx5_intf_mutex); -- cgit v1.2.1 From 987f6c69dd923069d443f6a37225f5b1630a30f2 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Sun, 14 Jul 2019 11:33:07 +0300 Subject: net/mlx5: Add missing RDMA_RX capabilities New flow table type RDMA_RX was added but the MLX5_CAP_FLOW_TABLE_TYPE didn't handle this new flow table type. This means that MLX5_CAP_FLOW_TABLE_TYPE returns an empty capability to this flow table type. Update both the macro and the maximum supported flow table type to RDMA_RX. Fixes: d83eb50e29de ("net/mlx5: Add support in RDMA RX steering") Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h index c48c382f926f..c1252d6be0ef 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h @@ -68,7 +68,7 @@ enum fs_flow_table_type { FS_FT_SNIFFER_RX = 0X5, FS_FT_SNIFFER_TX = 0X6, FS_FT_RDMA_RX = 0X7, - FS_FT_MAX_TYPE = FS_FT_SNIFFER_TX, + FS_FT_MAX_TYPE = FS_FT_RDMA_RX, }; enum fs_flow_table_op_mod { @@ -275,7 +275,8 @@ void mlx5_cleanup_fs(struct mlx5_core_dev *dev); (type == FS_FT_FDB) ? MLX5_CAP_ESW_FLOWTABLE_FDB(mdev, cap) : \ (type == FS_FT_SNIFFER_RX) ? MLX5_CAP_FLOWTABLE_SNIFFER_RX(mdev, cap) : \ (type == FS_FT_SNIFFER_TX) ? MLX5_CAP_FLOWTABLE_SNIFFER_TX(mdev, cap) : \ - (BUILD_BUG_ON_ZERO(FS_FT_SNIFFER_TX != FS_FT_MAX_TYPE))\ + (type == FS_FT_RDMA_RX) ? MLX5_CAP_FLOWTABLE_RDMA_RX(mdev, cap) : \ + (BUILD_BUG_ON_ZERO(FS_FT_RDMA_RX != FS_FT_MAX_TYPE))\ ) #endif -- cgit v1.2.1 From 7a32f2962c56d9d8a836b4469855caeee8766bd4 Mon Sep 17 00:00:00 2001 From: Edward Srouji Date: Tue, 23 Jul 2019 10:12:55 +0300 Subject: net/mlx5: Fix modify_cq_in alignment Fix modify_cq_in alignment to match the device specification. After this fix the 'cq_umem_valid' field will be in the right offset. Cc: # 4.19 Fixes: bd37197554eb ("net/mlx5: Update mlx5_ifc with DEVX UID bits") Signed-off-by: Edward Srouji Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Saeed Mahameed --- include/linux/mlx5/mlx5_ifc.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index b3d5752657d9..ec571fd7fcf8 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -5975,10 +5975,12 @@ struct mlx5_ifc_modify_cq_in_bits { struct mlx5_ifc_cqc_bits cq_context; - u8 reserved_at_280[0x40]; + u8 reserved_at_280[0x60]; u8 cq_umem_valid[0x1]; - u8 reserved_at_2c1[0x5bf]; + u8 reserved_at_2e1[0x1f]; + + u8 reserved_at_300[0x580]; u8 pas[0][0x40]; }; -- cgit v1.2.1 From 694826e366349d5b27599f591d3bd3a53512306e Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 14 Jul 2019 11:43:43 +0300 Subject: net/mlx5e: Fix wrong max num channels indication No XSK support in the enhanced IPoIB driver and representors. Add a profile property to specify this, and enhance the logic that calculates the max number of channels to take it into account. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 12 ++------ .../net/ethernet/mellanox/mlx5/core/en/params.h | 5 +-- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +- .../ethernet/mellanox/mlx5/core/en_fs_ethtool.c | 3 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 36 ++++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 8 ++--- .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 7 ++--- .../ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c | 1 + 9 files changed, 35 insertions(+), 41 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 79d93d6c7d7a..ce1be2a84231 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -159,7 +159,7 @@ do { \ enum mlx5e_rq_group { MLX5E_RQ_GROUP_REGULAR, MLX5E_RQ_GROUP_XSK, - MLX5E_NUM_RQ_GROUPS /* Keep last. */ +#define MLX5E_NUM_RQ_GROUPS(g) (1 + MLX5E_RQ_GROUP_##g) }; static inline u16 mlx5_min_rx_wqes(int wq_type, u32 wq_size) @@ -182,14 +182,6 @@ static inline int mlx5e_get_max_num_channels(struct mlx5_core_dev *mdev) min_t(int, mlx5_comp_vectors_count(mdev), MLX5E_MAX_NUM_CHANNELS); } -/* Use this function to get max num channels after netdev was created */ -static inline int mlx5e_get_netdev_max_channels(struct net_device *netdev) -{ - return min_t(unsigned int, - netdev->num_rx_queues / MLX5E_NUM_RQ_GROUPS, - netdev->num_tx_queues); -} - struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; struct mlx5_wqe_eth_seg eth; @@ -830,6 +822,7 @@ struct mlx5e_priv { struct net_device *netdev; struct mlx5e_stats stats; struct mlx5e_channel_stats channel_stats[MLX5E_MAX_NUM_CHANNELS]; + u16 max_nch; u8 max_opened_tc; struct hwtstamp_config tstamp; u16 q_counter; @@ -871,6 +864,7 @@ struct mlx5e_profile { mlx5e_fp_handle_rx_cqe handle_rx_cqe_mpwqe; } rx_handlers; int max_tc; + u8 rq_groups; }; void mlx5e_build_ptys2ethtool_map(void); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/params.h b/drivers/net/ethernet/mellanox/mlx5/core/en/params.h index bd882b5ee9a7..3a615d663d84 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/params.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/params.h @@ -66,9 +66,10 @@ static inline void mlx5e_qid_get_ch_and_group(struct mlx5e_params *params, *group = qid / nch; } -static inline bool mlx5e_qid_validate(struct mlx5e_params *params, u64 qid) +static inline bool mlx5e_qid_validate(const struct mlx5e_profile *profile, + struct mlx5e_params *params, u64 qid) { - return qid < params->num_channels * MLX5E_NUM_RQ_GROUPS; + return qid < params->num_channels * profile->rq_groups; } /* Parameter calculations */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 126ec4181286..ed25757ac5bd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -391,7 +391,7 @@ void mlx5e_ethtool_get_channels(struct mlx5e_priv *priv, { mutex_lock(&priv->state_lock); - ch->max_combined = mlx5e_get_netdev_max_channels(priv->netdev); + ch->max_combined = priv->max_nch; ch->combined_count = priv->channels.params.num_channels; if (priv->xsk.refcnt) { /* The upper half are XSK queues. */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c index ea3a490b569a..94304abc49e9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c @@ -611,7 +611,8 @@ static int validate_flow(struct mlx5e_priv *priv, return -ENOSPC; if (fs->ring_cookie != RX_CLS_FLOW_DISC) - if (!mlx5e_qid_validate(&priv->channels.params, fs->ring_cookie)) + if (!mlx5e_qid_validate(priv->profile, &priv->channels.params, + fs->ring_cookie)) return -EINVAL; switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 47eea6b3a1c3..570c42b7eeea 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1677,10 +1677,10 @@ static int mlx5e_open_sqs(struct mlx5e_channel *c, struct mlx5e_channel_param *cparam) { struct mlx5e_priv *priv = c->priv; - int err, tc, max_nch = mlx5e_get_netdev_max_channels(priv->netdev); + int err, tc; for (tc = 0; tc < params->num_tc; tc++) { - int txq_ix = c->ix + tc * max_nch; + int txq_ix = c->ix + tc * priv->max_nch; err = mlx5e_open_txqsq(c, c->priv->tisn[tc], txq_ix, params, &cparam->sq, &c->sq[tc], tc); @@ -2438,11 +2438,10 @@ int mlx5e_create_indirect_rqt(struct mlx5e_priv *priv) int mlx5e_create_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int err; int ix; - for (ix = 0; ix < max_nch; ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { err = mlx5e_create_rqt(priv, 1 /*size */, &tirs[ix].rqt); if (unlikely(err)) goto err_destroy_rqts; @@ -2460,10 +2459,9 @@ err_destroy_rqts: void mlx5e_destroy_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int i; - for (i = 0; i < max_nch; i++) + for (i = 0; i < priv->max_nch; i++) mlx5e_destroy_rqt(priv, &tirs[i].rqt); } @@ -2557,7 +2555,7 @@ static void mlx5e_redirect_rqts(struct mlx5e_priv *priv, mlx5e_redirect_rqt(priv, rqtn, MLX5E_INDIR_RQT_SIZE, rrp); } - for (ix = 0; ix < mlx5e_get_netdev_max_channels(priv->netdev); ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { struct mlx5e_redirect_rqt_param direct_rrp = { .is_rss = false, { @@ -2758,7 +2756,7 @@ static int mlx5e_modify_tirs_lro(struct mlx5e_priv *priv) goto free_in; } - for (ix = 0; ix < mlx5e_get_netdev_max_channels(priv->netdev); ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { err = mlx5_core_modify_tir(mdev, priv->direct_tir[ix].tirn, in, inlen); if (err) @@ -2858,12 +2856,11 @@ static void mlx5e_netdev_set_tcs(struct net_device *netdev) static void mlx5e_build_tc2txq_maps(struct mlx5e_priv *priv) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int i, tc; - for (i = 0; i < max_nch; i++) + for (i = 0; i < priv->max_nch; i++) for (tc = 0; tc < priv->profile->max_tc; tc++) - priv->channel_tc2txq[i][tc] = i + tc * max_nch; + priv->channel_tc2txq[i][tc] = i + tc * priv->max_nch; } static void mlx5e_build_tx2sq_maps(struct mlx5e_priv *priv) @@ -2884,7 +2881,7 @@ static void mlx5e_build_tx2sq_maps(struct mlx5e_priv *priv) void mlx5e_activate_priv_channels(struct mlx5e_priv *priv) { int num_txqs = priv->channels.num * priv->channels.params.num_tc; - int num_rxqs = priv->channels.num * MLX5E_NUM_RQ_GROUPS; + int num_rxqs = priv->channels.num * priv->profile->rq_groups; struct net_device *netdev = priv->netdev; mlx5e_netdev_set_tcs(netdev); @@ -3306,7 +3303,6 @@ err_destroy_inner_tirs: int mlx5e_create_direct_tirs(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); struct mlx5e_tir *tir; void *tirc; int inlen; @@ -3319,7 +3315,7 @@ int mlx5e_create_direct_tirs(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) if (!in) return -ENOMEM; - for (ix = 0; ix < max_nch; ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { memset(in, 0, inlen); tir = &tirs[ix]; tirc = MLX5_ADDR_OF(create_tir_in, in, ctx); @@ -3358,10 +3354,9 @@ void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc) void mlx5e_destroy_direct_tirs(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int i; - for (i = 0; i < max_nch; i++) + for (i = 0; i < priv->max_nch; i++) mlx5e_destroy_tir(priv->mdev, &tirs[i]); } @@ -3487,7 +3482,7 @@ void mlx5e_fold_sw_stats64(struct mlx5e_priv *priv, struct rtnl_link_stats64 *s) { int i; - for (i = 0; i < mlx5e_get_netdev_max_channels(priv->netdev); i++) { + for (i = 0; i < priv->max_nch; i++) { struct mlx5e_channel_stats *channel_stats = &priv->channel_stats[i]; struct mlx5e_rq_stats *xskrq_stats = &channel_stats->xskrq; struct mlx5e_rq_stats *rq_stats = &channel_stats->rq; @@ -4960,8 +4955,7 @@ static int mlx5e_nic_init(struct mlx5_core_dev *mdev, return err; mlx5e_build_nic_params(mdev, &priv->xsk, rss, &priv->channels.params, - mlx5e_get_netdev_max_channels(netdev), - netdev->mtu); + priv->max_nch, netdev->mtu); mlx5e_timestamp_init(priv); @@ -5164,6 +5158,7 @@ static const struct mlx5e_profile mlx5e_nic_profile = { .rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe, .rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq, .max_tc = MLX5E_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(XSK), }; /* mlx5e generic netdev management API (move to en_common.c) */ @@ -5181,6 +5176,7 @@ int mlx5e_netdev_init(struct net_device *netdev, priv->profile = profile; priv->ppriv = ppriv; priv->msglevel = MLX5E_MSG_LEVEL; + priv->max_nch = netdev->num_rx_queues / max_t(u8, profile->rq_groups, 1); priv->max_opened_tc = 1; mutex_init(&priv->state_lock); @@ -5218,7 +5214,7 @@ struct net_device *mlx5e_create_netdev(struct mlx5_core_dev *mdev, netdev = alloc_etherdev_mqs(sizeof(struct mlx5e_priv), nch * profile->max_tc, - nch * MLX5E_NUM_RQ_GROUPS); + nch * profile->rq_groups); if (!netdev) { mlx5_core_err(mdev, "alloc_etherdev_mqs() failed\n"); return NULL; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 7245d287633d..731819a26a0c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -1702,6 +1702,7 @@ static const struct mlx5e_profile mlx5e_rep_profile = { .rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe_rep, .rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq, .max_tc = 1, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; static const struct mlx5e_profile mlx5e_uplink_rep_profile = { @@ -1719,6 +1720,7 @@ static const struct mlx5e_profile mlx5e_uplink_rep_profile = { .rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe_rep, .rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq, .max_tc = MLX5E_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; static bool diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index 539b4d3656da..57f9f346d213 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -172,7 +172,7 @@ static void mlx5e_grp_sw_update_stats(struct mlx5e_priv *priv) memset(s, 0, sizeof(*s)); - for (i = 0; i < mlx5e_get_netdev_max_channels(priv->netdev); i++) { + for (i = 0; i < priv->max_nch; i++) { struct mlx5e_channel_stats *channel_stats = &priv->channel_stats[i]; struct mlx5e_xdpsq_stats *xdpsq_red_stats = &channel_stats->xdpsq; @@ -1395,7 +1395,7 @@ static const struct counter_desc ch_stats_desc[] = { static int mlx5e_grp_channels_get_num_stats(struct mlx5e_priv *priv) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); + int max_nch = priv->max_nch; return (NUM_RQ_STATS * max_nch) + (NUM_CH_STATS * max_nch) + @@ -1409,8 +1409,8 @@ static int mlx5e_grp_channels_get_num_stats(struct mlx5e_priv *priv) static int mlx5e_grp_channels_fill_strings(struct mlx5e_priv *priv, u8 *data, int idx) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); bool is_xsk = priv->xsk.ever_used; + int max_nch = priv->max_nch; int i, j, tc; for (i = 0; i < max_nch; i++) @@ -1452,8 +1452,8 @@ static int mlx5e_grp_channels_fill_strings(struct mlx5e_priv *priv, u8 *data, static int mlx5e_grp_channels_fill_stats(struct mlx5e_priv *priv, u64 *data, int idx) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); bool is_xsk = priv->xsk.ever_used; + int max_nch = priv->max_nch; int i, j, tc; for (i = 0; i < max_nch; i++) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 6bfaaab362dc..1a2560e3bf7c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -88,8 +88,7 @@ int mlx5i_init(struct mlx5_core_dev *mdev, netdev->mtu = netdev->max_mtu; mlx5e_build_nic_params(mdev, NULL, &priv->rss_params, &priv->channels.params, - mlx5e_get_netdev_max_channels(netdev), - netdev->mtu); + priv->max_nch, netdev->mtu); mlx5i_build_nic_params(mdev, &priv->channels.params); mlx5e_timestamp_init(priv); @@ -118,11 +117,10 @@ void mlx5i_cleanup(struct mlx5e_priv *priv) static void mlx5i_grp_sw_update_stats(struct mlx5e_priv *priv) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); struct mlx5e_sw_stats s = { 0 }; int i, j; - for (i = 0; i < max_nch; i++) { + for (i = 0; i < priv->max_nch; i++) { struct mlx5e_channel_stats *channel_stats; struct mlx5e_rq_stats *rq_stats; @@ -436,6 +434,7 @@ static const struct mlx5e_profile mlx5i_nic_profile = { .rx_handlers.handle_rx_cqe = mlx5i_handle_rx_cqe, .rx_handlers.handle_rx_cqe_mpwqe = NULL, /* Not supported */ .max_tc = MLX5I_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; /* mlx5i netdev NDos */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c index 6e56fa769d2e..c5a491e22e55 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c @@ -355,6 +355,7 @@ static const struct mlx5e_profile mlx5i_pkey_nic_profile = { .rx_handlers.handle_rx_cqe = mlx5i_handle_rx_cqe, .rx_handlers.handle_rx_cqe_mpwqe = NULL, /* Not supported */ .max_tc = MLX5I_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; const struct mlx5e_profile *mlx5i_pkey_get_profile(void) -- cgit v1.2.1 From 4b95840a6ced0634082f6d962ba9aa0ce797f12f Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Sun, 16 Jun 2019 13:20:29 +0300 Subject: net/mlx5e: Fix matching of speed to PRM link modes Speed translation is performed based on legacy or extended PTYS register. Translate speed with respect to: 1) Capability bit of extended PTYS table. 2) User request: a) When auto-negotiation is turned on, inspect advertisement whether it contains extended link modes. b) When auto-negotiation is turned off, speed > 100Gbps (maximal speed supported in legacy mode). With both conditions fulfilled translation is done with extended PTYS table otherwise use legacy PTYS table. Without this patch 25/50/100 Gbps speed cannot be set, since try to configure in extended mode but read from legacy mode. Fixes: dd1b9e09c12b ("net/mlx5: ethtool, Allow legacy link-modes configuration via non-extended ptys") Signed-off-by: Aya Levin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 27 ++++++--- drivers/net/ethernet/mellanox/mlx5/core/en/port.h | 6 +- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 67 +++++++++++++++------- 3 files changed, 68 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c index d5e5afbdca6d..f777994f3005 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -78,9 +78,10 @@ static const u32 mlx5e_ext_link_speed[MLX5E_EXT_LINK_MODES_NUMBER] = { }; static void mlx5e_port_get_speed_arr(struct mlx5_core_dev *mdev, - const u32 **arr, u32 *size) + const u32 **arr, u32 *size, + bool force_legacy) { - bool ext = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); + bool ext = force_legacy ? false : MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); *size = ext ? ARRAY_SIZE(mlx5e_ext_link_speed) : ARRAY_SIZE(mlx5e_link_speed); @@ -152,7 +153,8 @@ int mlx5_port_set_eth_ptys(struct mlx5_core_dev *dev, bool an_disable, sizeof(out), MLX5_REG_PTYS, 0, 1); } -u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper) +u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper, + bool force_legacy) { unsigned long temp = eth_proto_oper; const u32 *table; @@ -160,7 +162,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper) u32 max_size; int i; - mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy); i = find_first_bit(&temp, max_size); if (i < max_size) speed = table[i]; @@ -170,6 +172,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper) int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) { struct mlx5e_port_eth_proto eproto; + bool force_legacy = false; bool ext; int err; @@ -177,8 +180,13 @@ int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto); if (err) goto out; - - *speed = mlx5e_port_ptys2speed(mdev, eproto.oper); + if (ext && !eproto.admin) { + force_legacy = true; + err = mlx5_port_query_eth_proto(mdev, 1, false, &eproto); + if (err) + goto out; + } + *speed = mlx5e_port_ptys2speed(mdev, eproto.oper, force_legacy); if (!(*speed)) err = -EINVAL; @@ -201,7 +209,7 @@ int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) if (err) return err; - mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, false); for (i = 0; i < max_size; ++i) if (eproto.cap & MLX5E_PROT_MASK(i)) max_speed = max(max_speed, table[i]); @@ -210,14 +218,15 @@ int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) return 0; } -u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed) +u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed, + bool force_legacy) { u32 link_modes = 0; const u32 *table; u32 max_size; int i; - mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy); for (i = 0; i < max_size; ++i) { if (table[i] == speed) link_modes |= MLX5E_PROT_MASK(i); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h index 70f536ec51c4..4a7f4497692b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h @@ -48,10 +48,12 @@ void mlx5_port_query_eth_autoneg(struct mlx5_core_dev *dev, u8 *an_status, u8 *an_disable_cap, u8 *an_disable_admin); int mlx5_port_set_eth_ptys(struct mlx5_core_dev *dev, bool an_disable, u32 proto_admin, bool ext); -u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper); +u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper, + bool force_legacy); int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed); int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed); -u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed); +u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed, + bool force_legacy); int mlx5e_port_query_pbmc(struct mlx5_core_dev *mdev, void *out); int mlx5e_port_set_pbmc(struct mlx5_core_dev *mdev, void *in); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index ed25757ac5bd..03bed714bac3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -785,7 +785,7 @@ static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings } static void get_speed_duplex(struct net_device *netdev, - u32 eth_proto_oper, + u32 eth_proto_oper, bool force_legacy, struct ethtool_link_ksettings *link_ksettings) { struct mlx5e_priv *priv = netdev_priv(netdev); @@ -795,7 +795,7 @@ static void get_speed_duplex(struct net_device *netdev, if (!netif_carrier_ok(netdev)) goto out; - speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper); + speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper, force_legacy); if (!speed) { speed = SPEED_UNKNOWN; goto out; @@ -914,8 +914,8 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, /* Fields: eth_proto_admin and ext_eth_proto_admin are * mutually exclusive. Hence try reading legacy advertising * when extended advertising is zero. - * admin_ext indicates how eth_proto_admin should be - * interpreted + * admin_ext indicates which proto_admin (ext vs. legacy) + * should be read and interpreted */ admin_ext = ext; if (ext && !eth_proto_admin) { @@ -924,7 +924,7 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, admin_ext = false; } - eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, ext, + eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, admin_ext, eth_proto_oper); eth_proto_lp = MLX5_GET(ptys_reg, out, eth_proto_lp_advertise); an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin); @@ -939,7 +939,8 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, get_supported(mdev, eth_proto_cap, link_ksettings); get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings, admin_ext); - get_speed_duplex(priv->netdev, eth_proto_oper, link_ksettings); + get_speed_duplex(priv->netdev, eth_proto_oper, !admin_ext, + link_ksettings); eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap; @@ -1016,45 +1017,69 @@ static u32 mlx5e_ethtool2ptys_ext_adver_link(const unsigned long *link_modes) return ptys_modes; } +static bool ext_link_mode_requested(const unsigned long *adver) +{ +#define MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT ETHTOOL_LINK_MODE_50000baseKR_Full_BIT + int size = __ETHTOOL_LINK_MODE_MASK_NBITS - MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT; + __ETHTOOL_DECLARE_LINK_MODE_MASK(modes); + + bitmap_set(modes, MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT, size); + return bitmap_intersects(modes, adver, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static bool ext_speed_requested(u32 speed) +{ +#define MLX5E_MAX_PTYS_LEGACY_SPEED 100000 + return !!(speed > MLX5E_MAX_PTYS_LEGACY_SPEED); +} + +static bool ext_requested(u8 autoneg, const unsigned long *adver, u32 speed) +{ + bool ext_link_mode = ext_link_mode_requested(adver); + bool ext_speed = ext_speed_requested(speed); + + return autoneg == AUTONEG_ENABLE ? ext_link_mode : ext_speed; +} + int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv, const struct ethtool_link_ksettings *link_ksettings) { struct mlx5_core_dev *mdev = priv->mdev; struct mlx5e_port_eth_proto eproto; + const unsigned long *adver; bool an_changes = false; u8 an_disable_admin; bool ext_supported; - bool ext_requested; u8 an_disable_cap; bool an_disable; u32 link_modes; u8 an_status; + u8 autoneg; u32 speed; + bool ext; int err; u32 (*ethtool2ptys_adver_func)(const unsigned long *adver); -#define MLX5E_PTYS_EXT ((1ULL << ETHTOOL_LINK_MODE_50000baseKR_Full_BIT) - 1) + adver = link_ksettings->link_modes.advertising; + autoneg = link_ksettings->base.autoneg; + speed = link_ksettings->base.speed; - ext_requested = !!(link_ksettings->link_modes.advertising[0] > - MLX5E_PTYS_EXT || - link_ksettings->link_modes.advertising[1]); + ext = ext_requested(autoneg, adver, speed), ext_supported = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); - ext_requested &= ext_supported; + if (!ext_supported && ext) + return -EOPNOTSUPP; - speed = link_ksettings->base.speed; - ethtool2ptys_adver_func = ext_requested ? - mlx5e_ethtool2ptys_ext_adver_link : + ethtool2ptys_adver_func = ext ? mlx5e_ethtool2ptys_ext_adver_link : mlx5e_ethtool2ptys_adver_link; - err = mlx5_port_query_eth_proto(mdev, 1, ext_requested, &eproto); + err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto); if (err) { netdev_err(priv->netdev, "%s: query port eth proto failed: %d\n", __func__, err); goto out; } - link_modes = link_ksettings->base.autoneg == AUTONEG_ENABLE ? - ethtool2ptys_adver_func(link_ksettings->link_modes.advertising) : - mlx5e_port_speed2linkmodes(mdev, speed); + link_modes = autoneg == AUTONEG_ENABLE ? ethtool2ptys_adver_func(adver) : + mlx5e_port_speed2linkmodes(mdev, speed, !ext); link_modes = link_modes & eproto.cap; if (!link_modes) { @@ -1067,14 +1092,14 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv, mlx5_port_query_eth_autoneg(mdev, &an_status, &an_disable_cap, &an_disable_admin); - an_disable = link_ksettings->base.autoneg == AUTONEG_DISABLE; + an_disable = autoneg == AUTONEG_DISABLE; an_changes = ((!an_disable && an_disable_admin) || (an_disable && !an_disable_admin)); if (!an_changes && link_modes == eproto.admin) goto out; - mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext_requested); + mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext); mlx5_toggle_port_link(mdev); out: -- cgit v1.2.1 From 90bb769291161cf25a818d69cf608c181654473e Mon Sep 17 00:00:00 2001 From: Ariel Levkovich Date: Sat, 6 Jul 2019 18:06:15 +0300 Subject: net/mlx5e: Prevent encap flow counter update async to user query This patch prevents a race between user invoked cached counters query and a neighbor last usage updater. The cached flow counter stats can be queried by calling "mlx5_fc_query_cached" which provides the number of bytes and packets that passed via this flow since the last time this counter was queried. It does so by reducting the last saved stats from the current, cached stats and then updating the last saved stats with the cached stats. It also provide the lastuse value for that flow. Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the last usage time of encapsulation flows, it calls the flow counter query method periodically and async to user queries of the flow counter using cls_flower. This call is causing the driver to update the last reported bytes and packets from the cache and therefore, future user queries of the flow stats will return lower than expected number for bytes and packets since the last saved stats in the driver was updated async to the last saved stats in cls_flower. This causes wrong stats presentation of encapsulation flows to user. Since the neighbor usage updater only needs the lastuse stats from the cached counter, the fix is to use a dedicated lastuse query call that returns the lastuse value without synching between the cached stats and the last saved stats. Fixes: f6dfb4c3f216 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters") Signed-off-by: Ariel Levkovich Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c | 5 +++++ include/linux/mlx5/fs.h | 1 + 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index cc096f6011d9..7ecfc53cf5f6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1230,13 +1230,13 @@ static struct mlx5_fc *mlx5e_tc_get_counter(struct mlx5e_tc_flow *flow) void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe) { struct mlx5e_neigh *m_neigh = &nhe->m_neigh; - u64 bytes, packets, lastuse = 0; struct mlx5e_tc_flow *flow; struct mlx5e_encap_entry *e; struct mlx5_fc *counter; struct neigh_table *tbl; bool neigh_used = false; struct neighbour *n; + u64 lastuse; if (m_neigh->family == AF_INET) tbl = &arp_tbl; @@ -1256,7 +1256,7 @@ void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe) encaps[efi->index]); if (flow->flags & MLX5E_TC_FLOW_OFFLOADED) { counter = mlx5e_tc_get_counter(flow); - mlx5_fc_query_cached(counter, &bytes, &packets, &lastuse); + lastuse = mlx5_fc_query_lastuse(counter); if (time_after((unsigned long)lastuse, nhe->reported_lastuse)) { neigh_used = true; break; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c index b3762123a69c..1834d9f3aa1c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c @@ -369,6 +369,11 @@ int mlx5_fc_query(struct mlx5_core_dev *dev, struct mlx5_fc *counter, } EXPORT_SYMBOL(mlx5_fc_query); +u64 mlx5_fc_query_lastuse(struct mlx5_fc *counter) +{ + return counter->cache.lastuse; +} + void mlx5_fc_query_cached(struct mlx5_fc *counter, u64 *bytes, u64 *packets, u64 *lastuse) { diff --git a/include/linux/mlx5/fs.h b/include/linux/mlx5/fs.h index 04a569568eac..f049af3f3cd8 100644 --- a/include/linux/mlx5/fs.h +++ b/include/linux/mlx5/fs.h @@ -220,6 +220,7 @@ int mlx5_modify_rule_destination(struct mlx5_flow_handle *handler, struct mlx5_fc *mlx5_fc_create(struct mlx5_core_dev *dev, bool aging); void mlx5_fc_destroy(struct mlx5_core_dev *dev, struct mlx5_fc *counter); +u64 mlx5_fc_query_lastuse(struct mlx5_fc *counter); void mlx5_fc_query_cached(struct mlx5_fc *counter, u64 *bytes, u64 *packets, u64 *lastuse); int mlx5_fc_query(struct mlx5_core_dev *dev, struct mlx5_fc *counter, -- cgit v1.2.1 From 304ecc9a34b81a8b03b685f4460d0f9c1d6d4df9 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 18 Jul 2019 16:32:31 +0300 Subject: net/mlx5e: kTLS, Call WARN_ONCE on netdev mismatch A netdev mismatch in the processed TLS SKB should not occur, and indicates a kernel bug. Add WARN_ONCE to spot such cases. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Suggested-by: Jakub Kicinski Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c index ea032f54197e..3766545ce259 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c @@ -412,7 +412,7 @@ struct sk_buff *mlx5e_ktls_handle_tx_skb(struct net_device *netdev, goto out; tls_ctx = tls_get_ctx(skb->sk); - if (unlikely(tls_ctx->netdev != netdev)) + if (unlikely(WARN_ON_ONCE(tls_ctx->netdev != netdev))) goto err_out; priv_tx = mlx5e_get_ktls_tx_priv_ctx(tls_ctx); -- cgit v1.2.1 From 4ea52e25089724abf7ee2d6c0c52064e49252b64 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 18 Jul 2019 16:34:05 +0300 Subject: nfp: tls: rename tls packet counters Align to the naming convention in TLS documentation. Fixes: 51a5e563298d ("nfp: tls: add basic statistics") Suggested-by: Jakub Kicinski Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c index d9cbe84ac6ad..1b840ee47339 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c @@ -444,12 +444,12 @@ static u8 *nfp_vnic_get_sw_stats_strings(struct net_device *netdev, u8 *data) data = nfp_pr_et(data, "hw_rx_csum_complete"); data = nfp_pr_et(data, "hw_rx_csum_err"); data = nfp_pr_et(data, "rx_replace_buf_alloc_fail"); - data = nfp_pr_et(data, "rx_tls_decrypted"); + data = nfp_pr_et(data, "rx_tls_decrypted_packets"); data = nfp_pr_et(data, "hw_tx_csum"); data = nfp_pr_et(data, "hw_tx_inner_csum"); data = nfp_pr_et(data, "tx_gather"); data = nfp_pr_et(data, "tx_lso"); - data = nfp_pr_et(data, "tx_tls_encrypted"); + data = nfp_pr_et(data, "tx_tls_encrypted_packets"); data = nfp_pr_et(data, "tx_tls_ooo"); data = nfp_pr_et(data, "tx_tls_drop_no_sync_data"); -- cgit v1.2.1 From 280c089916228a005af7f95c1716ea1fea1027b5 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 22 Jul 2019 13:43:03 +0300 Subject: Documentation: TLS: fix stat counters description Add missing description of counters. Split tx_tls_encrypted counter into two, to give packets and bytes indications. Fixes: f42c104f2ec9 ("Documentation: add TLS offload documentation") Suggested-by: Jakub Kicinski Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- Documentation/networking/tls-offload.rst | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst index 048e5ca44824..b70b70dc4524 100644 --- a/Documentation/networking/tls-offload.rst +++ b/Documentation/networking/tls-offload.rst @@ -424,13 +424,24 @@ Statistics Following minimum set of TLS-related statistics should be reported by the driver: - * ``rx_tls_decrypted`` - number of successfully decrypted TLS segments - * ``tx_tls_encrypted`` - number of in-order TLS segments passed to device - for encryption + * ``rx_tls_decrypted_packets`` - number of successfully decrypted RX packets + which were part of a TLS stream. + * ``rx_tls_decrypted_bytes`` - number of TLS payload bytes in RX packets + which were successfully decrypted. + * ``tx_tls_encrypted_packets`` - number of TX packets passed to the device + for encryption of their TLS payload. + * ``tx_tls_encrypted_bytes`` - number of TLS payload bytes in TX packets + passed to the device for encryption. + * ``tx_tls_ctx`` - number of TLS TX HW offload contexts added to device for + encryption. * ``tx_tls_ooo`` - number of TX packets which were part of a TLS stream - but did not arrive in the expected order - * ``tx_tls_drop_no_sync_data`` - number of TX packets dropped because - they arrived out of order and associated record could not be found + but did not arrive in the expected order. + * ``tx_tls_drop_no_sync_data`` - number of TX packets which were part of + a TLS stream dropped, because they arrived out of order and associated + record could not be found. + * ``tx_tls_drop_bypass_req`` - number of TX packets which were part of a TLS + stream dropped, because they contain both data that has been encrypted by + software and data that expects hardware crypto offload. Notable corner cases, exceptions and additional requirements ============================================================ -- cgit v1.2.1