From e13452ac379070f038c264618e35559434252175 Mon Sep 17 00:00:00 2001 From: Rajmohan Mani Date: Fri, 28 Jul 2017 17:30:26 -0700 Subject: ACPI / PMIC: Add TI PMIC TPS68470 operation region driver The Kabylake platform coreboot (Chrome OS equivalent of BIOS) has defined 4 operation regions for the TI TPS68470 PMIC. These operation regions are to enable/disable voltage regulators, configure voltage regulators, enable/disable clocks and to configure clocks. This config adds ACPI operation region support for TI TPS68470 PMIC. TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates clocks for image sensors, drives a dual LED for flash and incorporates two LED drivers for general purpose indicators. This driver enables ACPI operation region support to control voltage regulators and clocks for the TPS68470 PMIC. Signed-off-by: Rajmohan Mani Acked-by: Sakari Ailus Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 16 ++ drivers/acpi/Makefile | 2 + drivers/acpi/pmic/tps68470_pmic.c | 455 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 473 insertions(+) create mode 100644 drivers/acpi/pmic/tps68470_pmic.c diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 1ce52f84dc23..e124a82df00c 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -535,4 +535,20 @@ if ARM64 source "drivers/acpi/arm64/Kconfig" endif +config TPS68470_PMIC_OPREGION + bool "ACPI operation region support for TPS68470 PMIC" + depends on MFD_TPS68470 + help + This config adds ACPI operation region support for TI TPS68470 PMIC. + TPS68470 device is an advanced power management unit that powers + a Compact Camera Module (CCM), generates clocks for image sensors, + drives a dual LED for flash and incorporates two LED drivers for + general purpose indicators. + This driver enables ACPI operation region support control voltage + regulators and clocks. + + This option is a bool as it provides an ACPI operation + region, which must be available before any of the devices + using this, are probed. + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 90265ab4437a..259e0b83acbf 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -107,6 +107,8 @@ obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o +obj-$(CONFIG_TPS68470_PMIC_OPREGION) += pmic/tps68470_pmic.o + video-objs += acpi_video.o video_detect.o obj-y += dptf/ diff --git a/drivers/acpi/pmic/tps68470_pmic.c b/drivers/acpi/pmic/tps68470_pmic.c new file mode 100644 index 000000000000..7f3c567e8168 --- /dev/null +++ b/drivers/acpi/pmic/tps68470_pmic.c @@ -0,0 +1,455 @@ +/* + * TI TPS68470 PMIC operation region driver + * + * Copyright (C) 2017 Intel Corporation. All rights reserved. + * + * Author: Rajmohan Mani + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Based on drivers/acpi/pmic/intel_pmic* drivers + */ + +#include +#include +#include +#include +#include + +struct tps68470_pmic_table { + u32 address; /* operation region address */ + u32 reg; /* corresponding register */ + u32 bitmask; /* bit mask for power, clock */ +}; + +#define TI_PMIC_POWER_OPREGION_ID 0xB0 +#define TI_PMIC_VR_VAL_OPREGION_ID 0xB1 +#define TI_PMIC_CLOCK_OPREGION_ID 0xB2 +#define TI_PMIC_CLKFREQ_OPREGION_ID 0xB3 + +struct tps68470_pmic_opregion { + struct mutex lock; + struct regmap *regmap; +}; + +#define S_IO_I2C_EN (BIT(0) | BIT(1)) + +static const struct tps68470_pmic_table power_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_S_I2C_CTL, + .bitmask = S_IO_I2C_EN, + /* S_I2C_CTL */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_VCMCTL, + .bitmask = BIT(0), + /* VCMCTL */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_VAUX1CTL, + .bitmask = BIT(0), + /* VAUX1_CTL */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_VAUX2CTL, + .bitmask = BIT(0), + /* VAUX2CTL */ + }, + { + .address = 0x10, + .reg = TPS68470_REG_VACTL, + .bitmask = BIT(0), + /* VACTL */ + }, + { + .address = 0x14, + .reg = TPS68470_REG_VDCTL, + .bitmask = BIT(0), + /* VDCTL */ + }, +}; + +/* Table to set voltage regulator value */ +static const struct tps68470_pmic_table vr_val_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_VSIOVAL, + .bitmask = TPS68470_VSIOVAL_IOVOLT_MASK, + /* TPS68470_REG_VSIOVAL */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_VIOVAL, + .bitmask = TPS68470_VIOVAL_IOVOLT_MASK, + /* TPS68470_REG_VIOVAL */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_VCMVAL, + .bitmask = TPS68470_VCMVAL_VCVOLT_MASK, + /* TPS68470_REG_VCMVAL */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_VAUX1VAL, + .bitmask = TPS68470_VAUX1VAL_AUX1VOLT_MASK, + /* TPS68470_REG_VAUX1VAL */ + }, + { + .address = 0x10, + .reg = TPS68470_REG_VAUX2VAL, + .bitmask = TPS68470_VAUX2VAL_AUX2VOLT_MASK, + /* TPS68470_REG_VAUX2VAL */ + }, + { + .address = 0x14, + .reg = TPS68470_REG_VAVAL, + .bitmask = TPS68470_VAVAL_AVOLT_MASK, + /* TPS68470_REG_VAVAL */ + }, + { + .address = 0x18, + .reg = TPS68470_REG_VDVAL, + .bitmask = TPS68470_VDVAL_DVOLT_MASK, + /* TPS68470_REG_VDVAL */ + }, +}; + +/* Table to configure clock frequency */ +static const struct tps68470_pmic_table clk_freq_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_POSTDIV2, + .bitmask = BIT(0) | BIT(1), + /* TPS68470_REG_POSTDIV2 */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_BOOSTDIV, + .bitmask = 0x1F, + /* TPS68470_REG_BOOSTDIV */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_BUCKDIV, + .bitmask = 0x0F, + /* TPS68470_REG_BUCKDIV */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_PLLSWR, + .bitmask = 0x13, + /* TPS68470_REG_PLLSWR */ + }, + { + .address = 0x10, + .reg = TPS68470_REG_XTALDIV, + .bitmask = 0xFF, + /* TPS68470_REG_XTALDIV */ + }, + { + .address = 0x14, + .reg = TPS68470_REG_PLLDIV, + .bitmask = 0xFF, + /* TPS68470_REG_PLLDIV */ + }, + { + .address = 0x18, + .reg = TPS68470_REG_POSTDIV, + .bitmask = 0x83, + /* TPS68470_REG_POSTDIV */ + }, +}; + +/* Table to configure and enable clocks */ +static const struct tps68470_pmic_table clk_table[] = { + { + .address = 0x00, + .reg = TPS68470_REG_PLLCTL, + .bitmask = 0xF5, + /* TPS68470_REG_PLLCTL */ + }, + { + .address = 0x04, + .reg = TPS68470_REG_PLLCTL2, + .bitmask = BIT(0), + /* TPS68470_REG_PLLCTL2 */ + }, + { + .address = 0x08, + .reg = TPS68470_REG_CLKCFG1, + .bitmask = TPS68470_CLKCFG1_MODE_A_MASK | + TPS68470_CLKCFG1_MODE_B_MASK, + /* TPS68470_REG_CLKCFG1 */ + }, + { + .address = 0x0C, + .reg = TPS68470_REG_CLKCFG2, + .bitmask = TPS68470_CLKCFG1_MODE_A_MASK | + TPS68470_CLKCFG1_MODE_B_MASK, + /* TPS68470_REG_CLKCFG2 */ + }, +}; + +static int pmic_get_reg_bit(u64 address, + const struct tps68470_pmic_table *table, + const unsigned int table_size, int *reg, + int *bitmask) +{ + u64 i; + + i = address / 4; + if (i >= table_size) + return -ENOENT; + + if (!reg || !bitmask) + return -EINVAL; + + *reg = table[i].reg; + *bitmask = table[i].bitmask; + + return 0; +} + +static int tps68470_pmic_get_power(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & bitmask) ? 1 : 0; + return 0; +} + +static int tps68470_pmic_get_vr_val(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = data & bitmask; + return 0; +} + +static int tps68470_pmic_get_clk(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & bitmask) ? 1 : 0; + return 0; +} + +static int tps68470_pmic_get_clk_freq(struct regmap *regmap, int reg, + int bitmask, u64 *value) +{ + unsigned int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = data & bitmask; + return 0; +} + +static int ti_tps68470_regmap_update_bits(struct regmap *regmap, int reg, + int bitmask, u64 value) +{ + return regmap_update_bits(regmap, reg, bitmask, value); +} + +static acpi_status tps68470_pmic_common_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *region_context, + int (*get)(struct regmap *, + int, int, u64 *), + int (*update)(struct regmap *, + int, int, u64), + const struct tps68470_pmic_table *tbl, + unsigned int tbl_size) +{ + struct tps68470_pmic_opregion *opregion = region_context; + struct regmap *regmap = opregion->regmap; + int reg, ret, bitmask; + + if (bits != 32) + return AE_BAD_PARAMETER; + + ret = pmic_get_reg_bit(address, tbl, tbl_size, ®, &bitmask); + if (ret < 0) + return AE_BAD_PARAMETER; + + if (function == ACPI_WRITE && *value > bitmask) + return AE_BAD_PARAMETER; + + mutex_lock(&opregion->lock); + + ret = (function == ACPI_READ) ? + get(regmap, reg, bitmask, value) : + update(regmap, reg, bitmask, *value); + + mutex_unlock(&opregion->lock); + + return ret ? AE_ERROR : AE_OK; +} + +static acpi_status tps68470_pmic_cfreq_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *handler_context, + void *region_context) +{ + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_clk_freq, + ti_tps68470_regmap_update_bits, + clk_freq_table, + ARRAY_SIZE(clk_freq_table)); +} + +static acpi_status tps68470_pmic_clk_handler(u32 function, + acpi_physical_address address, u32 bits, + u64 *value, void *handler_context, + void *region_context) +{ + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_clk, + ti_tps68470_regmap_update_bits, + clk_table, + ARRAY_SIZE(clk_table)); +} + +static acpi_status tps68470_pmic_vrval_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *handler_context, + void *region_context) +{ + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_vr_val, + ti_tps68470_regmap_update_bits, + vr_val_table, + ARRAY_SIZE(vr_val_table)); +} + +static acpi_status tps68470_pmic_pwr_handler(u32 function, + acpi_physical_address address, + u32 bits, u64 *value, + void *handler_context, + void *region_context) +{ + if (bits != 32) + return AE_BAD_PARAMETER; + + /* set/clear for bit 0, bits 0 and 1 together */ + if (function == ACPI_WRITE && + !(*value == 0 || *value == 1 || *value == 3)) { + return AE_BAD_PARAMETER; + } + + return tps68470_pmic_common_handler(function, address, bits, value, + region_context, + tps68470_pmic_get_power, + ti_tps68470_regmap_update_bits, + power_table, + ARRAY_SIZE(power_table)); +} + +static int tps68470_pmic_opregion_probe(struct platform_device *pdev) +{ + struct regmap *tps68470_regmap = dev_get_drvdata(pdev->dev.parent); + acpi_handle handle = ACPI_HANDLE(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct tps68470_pmic_opregion *opregion; + acpi_status status; + + if (!dev || !tps68470_regmap) { + dev_warn(dev, "dev or regmap is NULL\n"); + return -EINVAL; + } + + if (!handle) { + dev_warn(dev, "acpi handle is NULL\n"); + return -ENODEV; + } + + opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL); + if (!opregion) + return -ENOMEM; + + mutex_init(&opregion->lock); + opregion->regmap = tps68470_regmap; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_POWER_OPREGION_ID, + tps68470_pmic_pwr_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_mutex_destroy; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_VR_VAL_OPREGION_ID, + tps68470_pmic_vrval_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_remove_power_handler; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_CLOCK_OPREGION_ID, + tps68470_pmic_clk_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_remove_vr_val_handler; + + status = acpi_install_address_space_handler(handle, + TI_PMIC_CLKFREQ_OPREGION_ID, + tps68470_pmic_cfreq_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + goto out_remove_clk_handler; + + return 0; + +out_remove_clk_handler: + acpi_remove_address_space_handler(handle, TI_PMIC_CLOCK_OPREGION_ID, + tps68470_pmic_clk_handler); +out_remove_vr_val_handler: + acpi_remove_address_space_handler(handle, TI_PMIC_VR_VAL_OPREGION_ID, + tps68470_pmic_vrval_handler); +out_remove_power_handler: + acpi_remove_address_space_handler(handle, TI_PMIC_POWER_OPREGION_ID, + tps68470_pmic_pwr_handler); +out_mutex_destroy: + mutex_destroy(&opregion->lock); + return -ENODEV; +} + +static struct platform_driver tps68470_pmic_opregion_driver = { + .probe = tps68470_pmic_opregion_probe, + .driver = { + .name = "tps68470_pmic_opregion", + }, +}; + +builtin_platform_driver(tps68470_pmic_opregion_driver) -- cgit v1.2.1 From 8381c54fc0b40e727086a7f61399ae3e09ca7a95 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Wed, 20 Sep 2017 10:00:11 +0800 Subject: ACPICA: Hardware: Enable 64-bit support of hardware accesses ACPICA commit 6b0a604d171334f61a18bc92b44ec0437b11bf98 This patch enable 64-bit support for acpi_hw_read()/acpi_hw_write() and then convert acpi_read()/acpi_write() to invoke them. BZ 1287, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/6b0a604d1713 Link: https://bugs.acpica.org/show_bug.cgi?id=1287 Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/achware.h | 4 +- drivers/acpi/acpica/evgpe.c | 6 +-- drivers/acpi/acpica/hwgpe.c | 4 +- drivers/acpi/acpica/hwregs.c | 72 ++++++++++++++------------ drivers/acpi/acpica/hwxface.c | 118 ++---------------------------------------- 5 files changed, 49 insertions(+), 155 deletions(-) diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index fd4f3cacb356..cd722d8edacb 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -66,9 +66,9 @@ acpi_status acpi_hw_validate_register(struct acpi_generic_address *reg, u8 max_bit_width, u64 *address); -acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg); +acpi_status acpi_hw_read(u64 *value, struct acpi_generic_address *reg); -acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg); +acpi_status acpi_hw_write(u64 value, struct acpi_generic_address *reg); struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id); diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 229382035550..263d8fc4a9e2 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -390,8 +390,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list) struct acpi_gpe_handler_info *gpe_handler_info; u32 int_status = ACPI_INTERRUPT_NOT_HANDLED; u8 enabled_status_byte; - u32 status_reg; - u32 enable_reg; + u64 status_reg; + u64 enable_reg; acpi_cpu_flags flags; u32 i; u32 j; @@ -472,7 +472,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list) gpe_register_info->base_gpe_number, gpe_register_info->base_gpe_number + (ACPI_GPE_REGISTER_WIDTH - 1), - status_reg, enable_reg, + (u32)status_reg, (u32)enable_reg, gpe_register_info->enable_for_run, gpe_register_info->enable_for_wake)); diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 5eb11b30a79e..09b6822aa5cc 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -99,7 +99,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action) { struct acpi_gpe_register_info *gpe_register_info; acpi_status status = AE_OK; - u32 enable_mask; + u64 enable_mask; u32 register_bit; ACPI_FUNCTION_ENTRY(); @@ -214,7 +214,7 @@ acpi_status acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info, acpi_event_status *event_status) { - u32 in_byte; + u64 in_byte; u32 register_bit; struct acpi_gpe_register_info *gpe_register_info; acpi_event_status local_event_status = 0; diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index acb417b58bbb..aa6e00081915 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -220,16 +220,15 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, * * RETURN: Status * - * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max - * version of acpi_read, used internally since the overhead of - * 64-bit values is not needed. + * DESCRIPTION: Read from either memory or IO space. This is a 64-bit max + * version of acpi_read. * * LIMITATIONS: * space_ID must be system_memory or system_IO. * ******************************************************************************/ -acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) +acpi_status acpi_hw_read(u64 *value, struct acpi_generic_address *reg) { u64 address; u8 access_width; @@ -244,17 +243,17 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) /* Validate contents of the GAS register */ - status = acpi_hw_validate_register(reg, 32, &address); + status = acpi_hw_validate_register(reg, 64, &address); if (ACPI_FAILURE(status)) { return (status); } /* - * Initialize entire 32-bit return value to zero, convert access_width + * Initialize entire 64-bit return value to zero, convert access_width * into number of bits based */ *value = 0; - access_width = acpi_hw_get_access_bit_width(address, reg, 32); + access_width = acpi_hw_get_access_bit_width(address, reg, 64); bit_width = reg->bit_offset + reg->bit_width; bit_offset = reg->bit_offset; @@ -265,7 +264,7 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) index = 0; while (bit_width) { if (bit_offset >= access_width) { - value32 = 0; + value64 = 0; bit_offset -= access_width; } else { if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { @@ -276,7 +275,6 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) ACPI_DIV_8 (access_width), &value64, access_width); - value32 = (u32)value64; } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) @@ -286,15 +284,16 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) (access_width), &value32, access_width); + value64 = (u64)value32; } } /* * Use offset style bit writes because "Index * AccessWidth" is - * ensured to be less than 32-bits by acpi_hw_validate_register(). + * ensured to be less than 64-bits by acpi_hw_validate_register(). */ ACPI_SET_BITS(value, index * access_width, - ACPI_MASK_BITS_ABOVE_32(access_width), value32); + ACPI_MASK_BITS_ABOVE_64(access_width), value64); bit_width -= bit_width > access_width ? access_width : bit_width; @@ -302,8 +301,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) } ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n", - *value, access_width, ACPI_FORMAT_UINT64(address), + "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n", + ACPI_FORMAT_UINT64(*value), access_width, + ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); @@ -318,20 +318,18 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) * * RETURN: Status * - * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max - * version of acpi_write, used internally since the overhead of - * 64-bit values is not needed. + * DESCRIPTION: Write to either memory or IO space. This is a 64-bit max + * version of acpi_write. * ******************************************************************************/ -acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) +acpi_status acpi_hw_write(u64 value, struct acpi_generic_address *reg) { u64 address; u8 access_width; u32 bit_width; u8 bit_offset; u64 value64; - u32 value32; u8 index; acpi_status status; @@ -339,14 +337,14 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) /* Validate contents of the GAS register */ - status = acpi_hw_validate_register(reg, 32, &address); + status = acpi_hw_validate_register(reg, 64, &address); if (ACPI_FAILURE(status)) { return (status); } /* Convert access_width into number of bits based */ - access_width = acpi_hw_get_access_bit_width(address, reg, 32); + access_width = acpi_hw_get_access_bit_width(address, reg, 64); bit_width = reg->bit_offset + reg->bit_width; bit_offset = reg->bit_offset; @@ -358,16 +356,15 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) while (bit_width) { /* * Use offset style bit reads because "Index * AccessWidth" is - * ensured to be less than 32-bits by acpi_hw_validate_register(). + * ensured to be less than 64-bits by acpi_hw_validate_register(). */ - value32 = ACPI_GET_BITS(&value, index * access_width, - ACPI_MASK_BITS_ABOVE_32(access_width)); + value64 = ACPI_GET_BITS(&value, index * access_width, + ACPI_MASK_BITS_ABOVE_64(access_width)); if (bit_offset >= access_width) { bit_offset -= access_width; } else { if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { - value64 = (u64)value32; status = acpi_os_write_memory((acpi_physical_address) address + @@ -382,7 +379,7 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) index * ACPI_DIV_8 (access_width), - value32, + (u32)value64, access_width); } } @@ -397,8 +394,9 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) } ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", - value, access_width, ACPI_FORMAT_UINT64(address), + "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n", + ACPI_FORMAT_UINT64(value), access_width, + ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); @@ -526,6 +524,7 @@ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control) acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) { u32 value = 0; + u64 value64; acpi_status status; ACPI_FUNCTION_TRACE(hw_register_read); @@ -564,12 +563,14 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ status = - acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block); + acpi_hw_read(&value64, &acpi_gbl_FADT.xpm2_control_block); + value = (u32)value64; break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ - status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_read(&value64, &acpi_gbl_FADT.xpm_timer_block); + value = (u32)value64; break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ @@ -586,7 +587,7 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) } if (ACPI_SUCCESS(status)) { - *return_value = value; + *return_value = (u32)value; } return_ACPI_STATUS(status); @@ -622,6 +623,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) { acpi_status status; u32 read_value; + u64 read_value64; ACPI_FUNCTION_TRACE(hw_register_write); @@ -685,11 +687,12 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) * as per the ACPI spec. */ status = - acpi_hw_read(&read_value, + acpi_hw_read(&read_value64, &acpi_gbl_FADT.xpm2_control_block); if (ACPI_FAILURE(status)) { goto exit; } + read_value = (u32)read_value64; /* Insert the bits to be preserved */ @@ -745,22 +748,25 @@ acpi_hw_read_multiple(u32 *value, { u32 value_a = 0; u32 value_b = 0; + u64 value64; acpi_status status; /* The first register is always required */ - status = acpi_hw_read(&value_a, register_a); + status = acpi_hw_read(&value64, register_a); if (ACPI_FAILURE(status)) { return (status); } + value_a = (u32)value64; /* Second register is optional */ if (register_b->address) { - status = acpi_hw_read(&value_b, register_b); + status = acpi_hw_read(&value64, register_b); if (ACPI_FAILURE(status)) { return (status); } + value_b = (u32)value64; } /* diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 34684ae89981..b3c6e439933c 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -125,76 +125,12 @@ ACPI_EXPORT_SYMBOL(acpi_reset) ******************************************************************************/ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) { - u32 value_lo; - u32 value_hi; - u32 width; - u64 address; acpi_status status; ACPI_FUNCTION_NAME(acpi_read); - if (!return_value) { - return (AE_BAD_PARAMETER); - } - - /* Validate contents of the GAS register. Allow 64-bit transfers */ - - status = acpi_hw_validate_register(reg, 64, &address); - if (ACPI_FAILURE(status)) { - return (status); - } - - /* - * Two address spaces supported: Memory or I/O. PCI_Config is - * not supported here because the GAS structure is insufficient - */ - if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { - status = acpi_os_read_memory((acpi_physical_address) - address, return_value, - reg->bit_width); - if (ACPI_FAILURE(status)) { - return (status); - } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - - value_lo = 0; - value_hi = 0; - - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - - status = acpi_hw_read_port((acpi_io_address) - address, &value_lo, width); - if (ACPI_FAILURE(status)) { - return (status); - } - - if (reg->bit_width == 64) { - - /* Read the top 32 bits */ - - status = acpi_hw_read_port((acpi_io_address) - (address + 4), &value_hi, - 32); - if (ACPI_FAILURE(status)) { - return (status); - } - } - - /* Set the return value only if status is AE_OK */ - - *return_value = (value_lo | ((u64)value_hi << 32)); - } - - ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n", - ACPI_FORMAT_UINT64(*return_value), reg->bit_width, - ACPI_FORMAT_UINT64(address), - acpi_ut_get_region_name(reg->space_id))); - - return (AE_OK); + status = acpi_hw_read(return_value, reg); + return (status); } ACPI_EXPORT_SYMBOL(acpi_read) @@ -213,59 +149,11 @@ ACPI_EXPORT_SYMBOL(acpi_read) ******************************************************************************/ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) { - u32 width; - u64 address; acpi_status status; ACPI_FUNCTION_NAME(acpi_write); - /* Validate contents of the GAS register. Allow 64-bit transfers */ - - status = acpi_hw_validate_register(reg, 64, &address); - if (ACPI_FAILURE(status)) { - return (status); - } - - /* - * Two address spaces supported: Memory or IO. PCI_Config is - * not supported here because the GAS structure is insufficient - */ - if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { - status = acpi_os_write_memory((acpi_physical_address) - address, value, reg->bit_width); - if (ACPI_FAILURE(status)) { - return (status); - } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - - status = acpi_hw_write_port((acpi_io_address) - address, ACPI_LODWORD(value), - width); - if (ACPI_FAILURE(status)) { - return (status); - } - - if (reg->bit_width == 64) { - status = acpi_hw_write_port((acpi_io_address) - (address + 4), - ACPI_HIDWORD(value), 32); - if (ACPI_FAILURE(status)) { - return (status); - } - } - } - - ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n", - ACPI_FORMAT_UINT64(value), reg->bit_width, - ACPI_FORMAT_UINT64(address), - acpi_ut_get_region_name(reg->space_id))); - + status = acpi_hw_write(value, reg); return (status); } -- cgit v1.2.1 From 979fba9452b8111a83f555becea0a63c377e4e73 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Wed, 20 Sep 2017 10:00:20 +0800 Subject: ACPICA: acpiexec: Add testability of deferred table verification ACPICA commit 04c28c7549e694ea85f40bcc816039e5fbb4169c This patch adds testability of deferred table verification mechanism. As acpiexec uses dynamically allocated root table list from its very early stage, a change to acpi_reallocate_root_table() is required to allow deferred table verification mechanism to be triggered in such an environment. Note that acpi_gbl_enable_table_validation is still TRUE by default, thus: 1. Developers need to manually set acpi_gbl_enable_table_validation to FALSE for acpiexec to enable this test. 2. For all other OSPMs (Linux, BSDs, etc.), this commit is a no-op. Link: https://github.com/acpica/acpica/commit/04c28c7549e6 Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/tbxface.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index 26ad596c973e..5ecb8d2e6834 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -173,10 +173,13 @@ acpi_status ACPI_INIT_FUNCTION acpi_reallocate_root_table(void) ACPI_FUNCTION_TRACE(acpi_reallocate_root_table); /* - * Only reallocate the root table if the host provided a static buffer - * for the table array in the call to acpi_initialize_tables. + * If there are tables unverified, it is required to reallocate the + * root table list to clean up invalid table entries. Otherwise only + * reallocate the root table list if the host provided a static buffer + * for the table array in the call to acpi_initialize_tables(). */ - if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) { + if ((acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) && + acpi_gbl_enable_table_validation) { return_ACPI_STATUS(AE_SUPPORT); } -- cgit v1.2.1 From 81b7cb92958f50da1e0997de3289c09031c044c5 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 20 Sep 2017 10:00:30 +0800 Subject: ACPICA: Header support for the PDTT ACPI table ACPICA commit 9951c78746b52da7d23da4531fcfba6bf8c95b6a This is an ACPI 6.2 table. Link: https://github.com/acpica/acpica/commit/9951c78746b5 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- include/acpi/actbl1.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 6b8714a428b6..7a89e6de94da 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -69,6 +69,7 @@ #define ACPI_SIG_HEST "HEST" /* Hardware Error Source Table */ #define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */ #define ACPI_SIG_MSCT "MSCT" /* Maximum System Characteristics Table */ +#define ACPI_SIG_PDTT "PDTT" /* Processor Debug Trigger Table */ #define ACPI_SIG_PPTT "PPTT" /* Processor Properties Topology Table */ #define ACPI_SIG_SBST "SBST" /* Smart Battery Specification Table */ #define ACPI_SIG_SLIT "SLIT" /* System Locality Distance Information Table */ @@ -1280,6 +1281,35 @@ struct acpi_nfit_flush_address { u64 hint_address[1]; /* Variable length */ }; +/******************************************************************************* + * + * PDTT - Processor Debug Trigger Table (ACPI 6.2) + * Version 0 + * + ******************************************************************************/ + +struct acpi_table_pdtt { + struct acpi_table_header header; /* Common ACPI table header */ + u8 trigger_count; + u8 reserved[3]; + u32 array_offset; +}; + +/* + * PDTT Communication Channel Identifier Structure. + * The number of these structures is defined by trigger_count above, + * starting at array_offset. + */ +struct acpi_pdtt_channel { + u16 sub_channel_id; +}; + +/* Mask and Flags for above */ + +#define ACPI_PDTT_SUBCHANNEL_ID_MASK 0x00FF +#define ACPI_PDTT_RUNTIME_TRIGGER (1<<8) +#define ACPI_PPTT_WAIT_COMPLETION (1<<9) + /******************************************************************************* * * PPTT - Processor Properties Topology Table (ACPI 6.2) -- cgit v1.2.1 From fe97d28704147ba72f7d7859909f80b4bb5a17d4 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 20 Sep 2017 10:00:36 +0800 Subject: ACPICA: Restructure/cleanup all string-to-integer conversion functions ACPICA commit 610046d444ad781cc36673bf1f030abe50cbc61f Improve adherence to ACPI spec for implicit and explicit conversions Adds octal support for constants in ASL code Adds integer overflow errors for constants during ASL compilation Eliminates most of the existing complex flags parameters Simplify support for implicit/explicit runtime conversions Adds one new file, utilities/utstrsuppt.c Link: https://github.com/acpica/acpica/commit/610046d444ad Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/Makefile | 1 + drivers/acpi/acpica/acinterp.h | 6 +- drivers/acpi/acpica/acutils.h | 31 ++- drivers/acpi/acpica/dbconvert.c | 5 +- drivers/acpi/acpica/dswexec.c | 2 +- drivers/acpi/acpica/exconcat.c | 2 +- drivers/acpi/acpica/exconvrt.c | 30 ++- drivers/acpi/acpica/exmisc.c | 2 +- drivers/acpi/acpica/exresop.c | 2 +- drivers/acpi/acpica/nsconvert.c | 4 +- drivers/acpi/acpica/utstrsuppt.c | 417 ++++++++++++++++++++++++++++++ drivers/acpi/acpica/utstrtoul64.c | 420 +++++++++++++++---------------- include/acpi/acexcep.h | 16 +- tools/power/acpi/tools/acpidump/Makefile | 1 + tools/power/acpi/tools/acpidump/apdump.c | 3 +- tools/power/acpi/tools/acpidump/apmain.c | 4 +- 16 files changed, 690 insertions(+), 256 deletions(-) create mode 100644 drivers/acpi/acpica/utstrsuppt.c diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 1709551bc4aa..2d09b0249ac8 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -177,6 +177,7 @@ acpi-y += \ utresrc.o \ utstate.o \ utstring.o \ + utstrsuppt.o \ utstrtoul64.o \ utxface.o \ utxfinit.o \ diff --git a/drivers/acpi/acpica/acinterp.h b/drivers/acpi/acpica/acinterp.h index 29a863c85318..29555c8789a3 100644 --- a/drivers/acpi/acpica/acinterp.h +++ b/drivers/acpi/acpica/acinterp.h @@ -101,7 +101,8 @@ typedef const struct acpi_exdump_info { */ acpi_status acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc, u32 flags); + union acpi_operand_object **result_desc, + u32 implicit_conversion); acpi_status acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, @@ -424,9 +425,6 @@ acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, struct acpi_walk_state *walk_state, u8 implicit_conversion); -#define ACPI_IMPLICIT_CONVERSION TRUE -#define ACPI_NO_IMPLICIT_CONVERSION FALSE - /* * exstoren - resolve/store object */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 745134ade35f..7a568c604a75 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -141,6 +141,11 @@ extern const char *acpi_gbl_ptyp_decode[]; #define ACPI_MSG_SUFFIX \ acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) +/* Flags to indicate implicit or explicit string-to-integer conversion */ + +#define ACPI_IMPLICIT_CONVERSION TRUE +#define ACPI_NO_IMPLICIT_CONVERSION FALSE + /* Types for Resource descriptor entries */ #define ACPI_INVALID_RESOURCE 0 @@ -197,15 +202,29 @@ void acpi_ut_strlwr(char *src_string); int acpi_ut_stricmp(char *string1, char *string2); -acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *ret_integer); +/* + * utstrsuppt - string-to-integer conversion support functions + */ +acpi_status acpi_ut_convert_octal_string(char *string, u64 *return_value); + +acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr); + +acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr); + +char acpi_ut_remove_leading_zeros(char **string); + +u8 acpi_ut_detect_hex_prefix(char **string); + +u8 acpi_ut_detect_octal_prefix(char **string); /* - * Values for Flags above - * Note: LIMIT values correspond to acpi_gbl_integer_byte_width values (4/8) + * utstrtoul64 - string-to-integer conversion functions */ -#define ACPI_STRTOUL_32BIT 0x04 /* 4 bytes */ -#define ACPI_STRTOUL_64BIT 0x08 /* 8 bytes */ -#define ACPI_STRTOUL_BASE16 0x10 /* Default: Base10/16 */ +acpi_status acpi_ut_strtoul64(char *string, u64 *ret_integer); + +u64 acpi_ut_explicit_strtoul64(char *string); + +u64 acpi_ut_implicit_strtoul64(char *string); /* * utglobal - Global data structures and procedures diff --git a/drivers/acpi/acpica/dbconvert.c b/drivers/acpi/acpica/dbconvert.c index 857dbc43a9b1..32d546f0db2f 100644 --- a/drivers/acpi/acpica/dbconvert.c +++ b/drivers/acpi/acpica/dbconvert.c @@ -277,10 +277,7 @@ acpi_db_convert_to_object(acpi_object_type type, default: object->type = ACPI_TYPE_INTEGER; - status = acpi_ut_strtoul64(string, - (acpi_gbl_integer_byte_width | - ACPI_STRTOUL_BASE16), - &object->integer.value); + status = acpi_ut_strtoul64(string, &object->integer.value); break; } diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index 20d7744b06ae..22f45d090733 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -134,7 +134,7 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state, * object. Implicitly convert the argument if necessary. */ status = acpi_ex_convert_to_integer(obj_desc, &local_obj_desc, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); if (ACPI_FAILURE(status)) { goto cleanup; } diff --git a/drivers/acpi/acpica/exconcat.c b/drivers/acpi/acpica/exconcat.c index 76bfb7dcae2f..59b8de2f07d3 100644 --- a/drivers/acpi/acpica/exconcat.c +++ b/drivers/acpi/acpica/exconcat.c @@ -156,7 +156,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, status = acpi_ex_convert_to_integer(local_operand1, &temp_operand1, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); break; case ACPI_TYPE_BUFFER: diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c index f71028e334ee..23ebadb06a95 100644 --- a/drivers/acpi/acpica/exconvrt.c +++ b/drivers/acpi/acpica/exconvrt.c @@ -57,10 +57,10 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length); * * FUNCTION: acpi_ex_convert_to_integer * - * PARAMETERS: obj_desc - Object to be converted. Must be an - * Integer, Buffer, or String - * result_desc - Where the new Integer object is returned - * flags - Used for string conversion + * PARAMETERS: obj_desc - Object to be converted. Must be an + * Integer, Buffer, or String + * result_desc - Where the new Integer object is returned + * implicit_conversion - Used for string conversion * * RETURN: Status * @@ -70,14 +70,14 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length); acpi_status acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc, u32 flags) + union acpi_operand_object **result_desc, + u32 implicit_conversion) { union acpi_operand_object *return_desc; u8 *pointer; u64 result; u32 i; u32 count; - acpi_status status; ACPI_FUNCTION_TRACE_PTR(ex_convert_to_integer, obj_desc); @@ -123,12 +123,18 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, * hexadecimal as per the ACPI specification. The only exception (as * of ACPI 3.0) is that the to_integer() operator allows both decimal * and hexadecimal strings (hex prefixed with "0x"). + * + * Explicit conversion is used only by to_integer. + * All other string-to-integer conversions are implicit conversions. */ - status = acpi_ut_strtoul64(ACPI_CAST_PTR(char, pointer), - (acpi_gbl_integer_byte_width | - flags), &result); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + if (implicit_conversion) { + result = + acpi_ut_implicit_strtoul64(ACPI_CAST_PTR + (char, pointer)); + } else { + result = + acpi_ut_explicit_strtoul64(ACPI_CAST_PTR + (char, pointer)); } break; @@ -631,7 +637,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, */ status = acpi_ex_convert_to_integer(source_desc, result_desc, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); break; case ACPI_TYPE_STRING: diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 1e7649ce0a7b..dbad3ebd7df5 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -330,7 +330,7 @@ acpi_ex_do_logical_op(u16 opcode, case ACPI_TYPE_INTEGER: status = acpi_ex_convert_to_integer(operand1, &local_operand1, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); break; case ACPI_TYPE_STRING: diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index c4852429e2ff..1c7c9962b0de 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -415,7 +415,7 @@ acpi_ex_resolve_operands(u16 opcode, * Known as "Implicit Source Operand Conversion" */ status = acpi_ex_convert_to_integer(obj_desc, stack_ptr, - ACPI_STRTOUL_BASE16); + ACPI_IMPLICIT_CONVERSION); if (ACPI_FAILURE(status)) { if (status == AE_TYPE) { ACPI_ERROR((AE_INFO, diff --git a/drivers/acpi/acpica/nsconvert.c b/drivers/acpi/acpica/nsconvert.c index e4a7da8a11f0..539d775bbc92 100644 --- a/drivers/acpi/acpica/nsconvert.c +++ b/drivers/acpi/acpica/nsconvert.c @@ -78,8 +78,8 @@ acpi_ns_convert_to_integer(union acpi_operand_object *original_object, /* String-to-Integer conversion */ - status = acpi_ut_strtoul64(original_object->string.pointer, - acpi_gbl_integer_byte_width, &value); + status = + acpi_ut_strtoul64(original_object->string.pointer, &value); if (ACPI_FAILURE(status)) { return (status); } diff --git a/drivers/acpi/acpica/utstrsuppt.c b/drivers/acpi/acpica/utstrsuppt.c new file mode 100644 index 000000000000..ca41f037fd9a --- /dev/null +++ b/drivers/acpi/acpica/utstrsuppt.c @@ -0,0 +1,417 @@ +/******************************************************************************* + * + * Module Name: utstrsuppt - string-to-integer conversion support functions + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2017, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utstrsuppt") + +/* Local prototypes */ +static acpi_status +acpi_ut_insert_digit(u64 *accumulated_value, u32 base, int ascii_digit); + +static acpi_status +acpi_ut_strtoul_multiply64(u64 multiplicand, u64 multiplier, u64 *out_product); + +static acpi_status +acpi_ut_strtoul_add64(u64 addend1, u64 addend2, u64 *out_sum); + +/******************************************************************************* + * + * FUNCTION: acpi_ut_convert_octal_string + * + * PARAMETERS: string - Null terminated input string + * return_value_ptr - Where the converted value is returned + * + * RETURN: Status and 64-bit converted integer + * + * DESCRIPTION: Performs a base 8 conversion of the input string to an + * integer value, either 32 or 64 bits. + * + * NOTE: Maximum 64-bit unsigned octal value is 01777777777777777777777 + * Maximum 32-bit unsigned octal value is 037777777777 + * + ******************************************************************************/ + +acpi_status acpi_ut_convert_octal_string(char *string, u64 *return_value_ptr) +{ + u64 accumulated_value = 0; + acpi_status status = AE_OK; + + /* Convert each ASCII byte in the input string */ + + while (*string) { + + /* Must be ASCII 0-7, otherwise terminate with no error */ + + if (!(ACPI_IS_OCTAL_DIGIT(*string))) { + break; + } + + /* Convert and insert this octal digit into the accumulator */ + + status = acpi_ut_insert_digit(&accumulated_value, 8, *string); + if (ACPI_FAILURE(status)) { + status = AE_OCTAL_OVERFLOW; + break; + } + + string++; + } + + /* Always return the value that has been accumulated */ + + *return_value_ptr = accumulated_value; + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_convert_decimal_string + * + * PARAMETERS: string - Null terminated input string + * return_value_ptr - Where the converted value is returned + * + * RETURN: Status and 64-bit converted integer + * + * DESCRIPTION: Performs a base 10 conversion of the input string to an + * integer value, either 32 or 64 bits. + * + * NOTE: Maximum 64-bit unsigned decimal value is 18446744073709551615 + * Maximum 32-bit unsigned decimal value is 4294967295 + * + ******************************************************************************/ + +acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr) +{ + u64 accumulated_value = 0; + acpi_status status = AE_OK; + + /* Convert each ASCII byte in the input string */ + + while (*string) { + + /* Must be ASCII 0-9, otherwise terminate with no error */ + + if (!isdigit(*string)) { + break; + } + + /* Convert and insert this decimal digit into the accumulator */ + + status = acpi_ut_insert_digit(&accumulated_value, 10, *string); + if (ACPI_FAILURE(status)) { + status = AE_DECIMAL_OVERFLOW; + break; + } + + string++; + } + + /* Always return the value that has been accumulated */ + + *return_value_ptr = accumulated_value; + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_convert_hex_string + * + * PARAMETERS: string - Null terminated input string + * return_value_ptr - Where the converted value is returned + * + * RETURN: Status and 64-bit converted integer + * + * DESCRIPTION: Performs a base 16 conversion of the input string to an + * integer value, either 32 or 64 bits. + * + * NOTE: Maximum 64-bit unsigned hex value is 0xFFFFFFFFFFFFFFFF + * Maximum 32-bit unsigned hex value is 0xFFFFFFFF + * + ******************************************************************************/ + +acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr) +{ + u64 accumulated_value = 0; + acpi_status status = AE_OK; + + /* Convert each ASCII byte in the input string */ + + while (*string) { + + /* Must be ASCII A-F, a-f, or 0-9, otherwise terminate with no error */ + + if (!isxdigit(*string)) { + break; + } + + /* Convert and insert this hex digit into the accumulator */ + + status = acpi_ut_insert_digit(&accumulated_value, 16, *string); + if (ACPI_FAILURE(status)) { + status = AE_HEX_OVERFLOW; + break; + } + + string++; + } + + /* Always return the value that has been accumulated */ + + *return_value_ptr = accumulated_value; + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_remove_leading_zeros + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: Next character after the leading zeros. This behavior may be + * Used by the caller to detect end-of-string. + * + * DESCRIPTION: Remove all leading zeros in the input string. Return the + * next character after the final zero to check for the end + * of the string (NULL terminator). + * + ******************************************************************************/ + +char acpi_ut_remove_leading_zeros(char **string) +{ + /* Skip all leading zeros */ + + while (**string == ACPI_ASCII_ZERO) { + *string += 1; + } + + return (**string); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_detect_hex_prefix + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: TRUE if a 0x prefix was found + * + * DESCRIPTION: Detect and remove a hex 0x prefix + * + ******************************************************************************/ + +u8 acpi_ut_detect_hex_prefix(char **string) +{ + + if ((**string == ACPI_ASCII_ZERO) && + (tolower((int)*(*string + 1)) == 'x')) { + *string += 2; /* Go past the leading 0x */ + return (TRUE); + } + + return (FALSE); /* Not a hex string */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_detect_octal_prefix + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: True if an octal 0 prefix was found + * + * DESCRIPTION: Detect and remove an octal prefix (zero) + * + ******************************************************************************/ + +u8 acpi_ut_detect_octal_prefix(char **string) +{ + + if (**string == ACPI_ASCII_ZERO) { + *string += 1; /* Go past the leading 0 */ + return (TRUE); + } + + return (FALSE); /* Not an octal string */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_insert_digit + * + * PARAMETERS: accumulated_value - Current value of the integer value + * accumulator. The New value is + * returned here. + * base - Radix, either 8/10/16 supported + * ascii_digit - ASCII single digit to be inserted + * + * RETURN: Status and result of convert/insert operation. The only + * exception is numeric overflow of either the multiply or the + * add operations. + * + * DESCRIPTION: Generic conversion and insertion function for all bases: + * + * 1) Multiply the current accumulated converted value by the + * base in order to make room for the new character. + * + * 2) Add the current accumulated/converted value the new + * character (after the character has been converted to a binary + * value). + * + * Note: The only possible exception indicates an integer + * overflow (AE_NUMERIC_OVERFLOW) + * + ******************************************************************************/ + +static acpi_status +acpi_ut_insert_digit(u64 *accumulated_value, u32 base, int ascii_digit) +{ + acpi_status status; + u64 product; + + /* Make room in the accumulated value for the incoming digit */ + + status = acpi_ut_strtoul_multiply64(*accumulated_value, base, &product); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Add in the new digit, and store to the caller's accumulated value */ + + status = + acpi_ut_strtoul_add64(product, + acpi_ut_ascii_char_to_hex(ascii_digit), + accumulated_value); + if (ACPI_FAILURE(status)) { + return (status); + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strtoul_multiply64 + * + * PARAMETERS: multiplicand - Current accumulated converted integer + * multiplier - Base/Radix + * out_product - Where the product is returned + * + * RETURN: Status and 64-bit product + * + * DESCRIPTION: Multiply two 64-bit values, with checking for 64-bit overflow as + * well as 32-bit overflow if necessary (if the current global + * integer width is 32). + * + ******************************************************************************/ + +static acpi_status +acpi_ut_strtoul_multiply64(u64 multiplicand, u64 multiplier, u64 *out_product) +{ + u64 val; + + /* Exit if either operand is zero */ + + *out_product = 0; + if (!multiplicand || !multiplier) { + return (AE_OK); + } + + /* Check for 64-bit overflow before the actual multiplication */ + + acpi_ut_short_divide(ACPI_UINT64_MAX, (u32)multiplier, &val, NULL); + if (multiplicand > val) { + return (AE_NUMERIC_OVERFLOW); + } + + val = multiplicand * multiplier; + + /* Check for 32-bit overflow if necessary */ + + if ((acpi_gbl_integer_bit_width == 32) && (val > ACPI_UINT32_MAX)) { + return (AE_NUMERIC_OVERFLOW); + } + + *out_product = val; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strtoul_add64 + * + * PARAMETERS: addend1 - Current accumulated converted integer + * addend2 - New hex value/char + * out_sum - Where sum is returned (Accumulator) + * + * RETURN: Status and 64-bit sum + * + * DESCRIPTION: Add two 64-bit values, with checking for 64-bit overflow as + * well as 32-bit overflow if necessary (if the current global + * integer width is 32). + * + ******************************************************************************/ + +static acpi_status acpi_ut_strtoul_add64(u64 addend1, u64 addend2, u64 *out_sum) +{ + u64 sum; + + /* Check for 64-bit overflow before the actual addition */ + + if ((addend1 > 0) && (addend2 > (ACPI_UINT64_MAX - addend1))) { + return (AE_NUMERIC_OVERFLOW); + } + + sum = addend1 + addend2; + + /* Check for 32-bit overflow if necessary */ + + if ((acpi_gbl_integer_bit_width == 32) && (sum > ACPI_UINT32_MAX)) { + return (AE_NUMERIC_OVERFLOW); + } + + *out_sum = sum; + return (AE_OK); +} diff --git a/drivers/acpi/acpica/utstrtoul64.c b/drivers/acpi/acpica/utstrtoul64.c index 9633ee142855..e5a2df3f16e5 100644 --- a/drivers/acpi/acpica/utstrtoul64.c +++ b/drivers/acpi/acpica/utstrtoul64.c @@ -1,6 +1,7 @@ /******************************************************************************* * - * Module Name: utstrtoul64 - string to 64-bit integer support + * Module Name: utstrtoul64 - string-to-integer support for both 64-bit + * and 32-bit integers * ******************************************************************************/ @@ -44,152 +45,74 @@ #include #include "accommon.h" -/******************************************************************************* - * - * The functions in this module satisfy the need for 64-bit string-to-integer - * conversions on both 32-bit and 64-bit platforms. - * - ******************************************************************************/ - #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utstrtoul64") -/* Local prototypes */ -static u64 acpi_ut_strtoul_base10(char *string, u32 flags); - -static u64 acpi_ut_strtoul_base16(char *string, u32 flags); - /******************************************************************************* * - * String conversion rules as written in the ACPI specification. The error - * conditions and behavior are different depending on the type of conversion. - * + * This module contains the external string to 64/32-bit unsigned integer + * conversion functions: * - * Implicit data type conversion: string-to-integer - * -------------------------------------------------- - * - * Base is always 16. This is the ACPI_STRTOUL_BASE16 case. - * - * Example: - * Add ("BA98", Arg0, Local0) - * - * The integer is initialized to the value zero. - * The ASCII string is interpreted as a hexadecimal constant. - * - * 1) A "0x" prefix is not allowed. However, ACPICA allows this for - * compatibility with previous ACPICA. (NO ERROR) - * - * 2) Terminates when the size of an integer is reached (32 or 64 bits). - * (NO ERROR) + * 1) Standard strtoul() function with 64-bit support. This is mostly used by + * the iASL compiler. + * 2) Runtime "Explicit conversion" as defined in the ACPI specification. + * 3) Runtime "Implicit conversion" as defined in the ACPI specification. * - * 3) The first non-hex character terminates the conversion without error. - * (NO ERROR) + * Current users of this module: * - * 4) Conversion of a null (zero-length) string to an integer is not - * allowed. However, ACPICA allows this for compatibility with previous - * ACPICA. This conversion returns the value 0. (NO ERROR) - * - * - * Explicit data type conversion: to_integer() with string operand - * --------------------------------------------------------------- - * - * Base is either 10 (default) or 16 (with 0x prefix) - * - * Examples: - * to_integer ("1000") - * to_integer ("0xABCD") - * - * 1) Can be (must be) either a decimal or hexadecimal numeric string. - * A hex value must be prefixed by "0x" or it is interpreted as a decimal. + * interpreter - Implicit and explicit conversions, GPE method names + * debugger - Command line input string conversion + * iASL - Main parser, conversion of constants to integers + * iASL - Data Table Compiler parser (constant math expressions) + * iASL - Preprocessor (constant math expressions) + * acpi_dump - Input table addresses + * acpi_exec - Testing of the acpi_ut_strtoul64 function * - * 2) The value must not exceed the maximum of an integer value. ACPI spec - * states the behavior is "unpredictable", so ACPICA matches the behavior - * of the implicit conversion case.(NO ERROR) + * Notes concerning users of these interfaces: * - * 3) Behavior on the first non-hex character is not specified by the ACPI - * spec, so ACPICA matches the behavior of the implicit conversion case - * and terminates. (NO ERROR) + * acpi_gbl_integer_byte_width is used to set the 32/64 bit limit. This global + * must be set to the proper width. For the core ACPICA code, the width + * depends on the DSDT version. For iASL, the default width is 64 bits for + * all parsers, but error checking is performed later to flag cases where + * a 64-bit constant is wrongly defined in a 32-bit DSDT/SSDT. * - * 4) A null (zero-length) string is illegal. - * However, ACPICA allows this for compatibility with previous ACPICA. - * This conversion returns the value 0. (NO ERROR) + * In ACPI, the only place where octal numbers are supported is within + * the ASL language itself. There is no runtime support for octal. * ******************************************************************************/ - /******************************************************************************* * * FUNCTION: acpi_ut_strtoul64 * - * PARAMETERS: string - Null terminated input string - * flags - Conversion info, see below + * PARAMETERS: string - Null terminated input string. + * Must be a valid pointer * return_value - Where the converted integer is - * returned - * - * RETURN: Status and Converted value - * - * DESCRIPTION: Convert a string into an unsigned value. Performs either a - * 32-bit or 64-bit conversion, depending on the input integer - * size in Flags (often the current mode of the interpreter). - * - * Values for Flags: - * ACPI_STRTOUL_32BIT - Max integer value is 32 bits - * ACPI_STRTOUL_64BIT - Max integer value is 64 bits - * ACPI_STRTOUL_BASE16 - Input string is hexadecimal. Default - * is 10/16 based on string prefix (0x). + * returned. Must be a valid pointer * - * NOTES: - * Negative numbers are not supported, as they are not supported by ACPI. + * RETURN: Status and converted integer + * Returns an exception on numeric overflow * - * Supports only base 16 or base 10 strings/values. Does not - * support Octal strings, as these are not supported by ACPI. + * DESCRIPTION: Convert a string into an unsigned integer. Performs either a + * 32-bit or 64-bit conversion, depending on the current global + * integer width. Supports Decimal, Hex, and Octal strings. * - * Current users of this support: + * Current users of this function: * - * interpreter - Implicit and explicit conversions, GPE method names - * debugger - Command line input string conversion - * iASL - Main parser, conversion of constants to integers - * iASL - Data Table Compiler parser (constant math expressions) * iASL - Preprocessor (constant math expressions) - * acpi_dump - Input table addresses - * acpi_exec - Testing of the acpi_ut_strtoul64 function - * - * Note concerning callers: - * acpi_gbl_integer_byte_width can be used to set the 32/64 limit. If used, - * this global should be set to the proper width. For the core ACPICA code, - * this width depends on the DSDT version. For iASL, the default byte - * width is always 8 for the parser, but error checking is performed later - * to flag cases where a 64-bit constant is defined in a 32-bit DSDT/SSDT. + * iASL - Main parser, conversion of ASL constants to integers + * iASL - Data Table Compiler parser (constant math expressions) * ******************************************************************************/ - -acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *return_value) +acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) { acpi_status status = AE_OK; - u32 base; + u32 base = 10; /* Default is decimal */ ACPI_FUNCTION_TRACE_STR(ut_strtoul64, string); - /* Parameter validation */ - - if (!string || !return_value) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - *return_value = 0; - /* Check for zero-length string, returns 0 */ - - if (*string == 0) { - return_ACPI_STATUS(AE_OK); - } - - /* Skip over any white space at start of string */ - - while (isspace((int)*string)) { - string++; - } - - /* End of string? return 0 */ + /* Null return string returns a value of zero */ if (*string == 0) { return_ACPI_STATUS(AE_OK); @@ -198,45 +121,45 @@ acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *return_value) /* * 1) The "0x" prefix indicates base 16. Per the ACPI specification, * the "0x" prefix is only allowed for implicit (non-strict) conversions. - * However, we always allow it for compatibility with older ACPICA. + * However, we always allow it for compatibility with older ACPICA and + * just plain on principle. */ - if ((*string == ACPI_ASCII_ZERO) && - (tolower((int)*(string + 1)) == 'x')) { - string += 2; /* Go past the 0x */ - if (*string == 0) { - return_ACPI_STATUS(AE_OK); /* Return value 0 */ - } - - base = 16; - } - - /* 2) Force to base 16 (implicit conversion case) */ - - else if (flags & ACPI_STRTOUL_BASE16) { + if (acpi_ut_detect_hex_prefix(&string)) { base = 16; } - /* 3) Default fallback is to Base 10 */ - - else { - base = 10; + /* + * 2) Check for an octal constant, defined to be a leading zero + * followed by an valid octal digit (0-7) + */ + else if (acpi_ut_detect_octal_prefix(&string)) { + base = 8; } - /* Skip all leading zeros */ - - while (*string == ACPI_ASCII_ZERO) { - string++; - if (*string == 0) { - return_ACPI_STATUS(AE_OK); /* Return value 0 */ - } + if (!acpi_ut_remove_leading_zeros(&string)) { + return_ACPI_STATUS(AE_OK); /* Return value 0 */ } - /* Perform the base 16 or 10 conversion */ - - if (base == 16) { - *return_value = acpi_ut_strtoul_base16(string, flags); - } else { - *return_value = acpi_ut_strtoul_base10(string, flags); + /* + * Perform the base 8, 10, or 16 conversion. A numeric overflow will + * return an exception. + */ + switch (base) { + case 8: + status = acpi_ut_convert_octal_string(string, return_value); + break; + + case 10: + status = acpi_ut_convert_decimal_string(string, return_value); + break; + + case 16: + status = acpi_ut_convert_hex_string(string, return_value); + break; + + default: + status = AE_AML_INTERNAL; /* Should never happen */ + break; } return_ACPI_STATUS(status); @@ -244,104 +167,167 @@ acpi_status acpi_ut_strtoul64(char *string, u32 flags, u64 *return_value) /******************************************************************************* * - * FUNCTION: acpi_ut_strtoul_base10 + * FUNCTION: acpi_ut_implicit_strtoul64 + * + * PARAMETERS: string - Null terminated input string. + * Must be a valid pointer * - * PARAMETERS: string - Null terminated input string - * flags - Conversion info + * RETURN: Converted integer * - * RETURN: 64-bit converted integer + * DESCRIPTION: Perform a 64-bit conversion with restrictions placed upon + * an "implicit conversion" by the ACPI specification. Used by + * many ASL operators that require an integer operand, and support + * an automatic (implicit) conversion from a string operand + * to the final integer operand. The restriction is that only + * hex strings are supported. * - * DESCRIPTION: Performs a base 10 conversion of the input string to an - * integer value, either 32 or 64 bits. - * Note: String must be valid and non-null. + * ----------------------------------------------------------------------------- + * + * Base is always 16, either with or without the 0x prefix. + * + * Examples (both are hex values): + * Add ("BA98", Arg0, Local0) + * Subtract ("0x12345678", Arg1, Local1) + * + * Rules extracted from the ACPI specification: + * + * The converted integer is initialized to the value zero. + * The ASCII string is interpreted as a hexadecimal constant. + * + * 1) A "0x" prefix is not allowed. However, ACPICA allows this as an + * ACPI extension on general principle. (NO ERROR) + * + * 2) Terminates when the size of an integer is reached (32 or 64 bits). + * There are no numeric overflow conditions. (NO ERROR) + * + * 3) The first non-hex character terminates the conversion and returns + * the current accumulated value of the converted integer (NO ERROR). + * + * 4) Conversion of a null (zero-length) string to an integer is + * technically allowed. However, ACPICA allows as an ACPI extension. + * The conversion returns the value 0. (NO ERROR) + * + * Note: there are no error conditions returned by this function. At + * the minimum, a value of zero is returned. + * + * Current users of this function: + * + * interpreter - All runtime implicit conversions, as per ACPI specification + * iASL - Data Table Compiler parser (constant math expressions) * ******************************************************************************/ -static u64 acpi_ut_strtoul_base10(char *string, u32 flags) +u64 acpi_ut_implicit_strtoul64(char *string) { - int ascii_digit; - u64 next_value; - u64 return_value = 0; + u64 converted_integer = 0; - /* Main loop: convert each ASCII byte in the input string */ + ACPI_FUNCTION_TRACE_STR(ut_implicit_strtoul64, string); - while (*string) { - ascii_digit = *string; - if (!isdigit(ascii_digit)) { - - /* Not ASCII 0-9, terminate */ - - goto exit; - } - - /* Convert and insert (add) the decimal digit */ - - acpi_ut_short_multiply(return_value, 10, &next_value); - next_value += (ascii_digit - ACPI_ASCII_ZERO); - - /* Check for overflow (32 or 64 bit) - return current converted value */ - - if (((flags & ACPI_STRTOUL_32BIT) && (next_value > ACPI_UINT32_MAX)) || (next_value < return_value)) { /* 64-bit overflow case */ - goto exit; - } + /* + * Per the ACPI specification, only hexadecimal is supported for + * implicit conversions, and the "0x" prefix is "not allowed". + * However, allow a "0x" prefix as an ACPI extension. + */ + acpi_ut_detect_hex_prefix(&string); - return_value = next_value; - string++; + if (!acpi_ut_remove_leading_zeros(&string)) { + return_VALUE(0); } -exit: - return (return_value); + /* + * Ignore overflow as per the ACPI specification. This is implemented by + * ignoring the return status below. On overflow, the input string is + * simply truncated. + */ + acpi_ut_convert_hex_string(string, &converted_integer); + return_VALUE(converted_integer); } /******************************************************************************* * - * FUNCTION: acpi_ut_strtoul_base16 + * FUNCTION: acpi_ut_explicit_strtoul64 + * + * PARAMETERS: string - Null terminated input string. + * Must be a valid pointer + * + * RETURN: Converted integer + * + * DESCRIPTION: Perform a 64-bit conversion with the restrictions placed upon + * an "explicit conversion" by the ACPI specification. The + * main restriction is that only hex and decimal are supported. + * + * ----------------------------------------------------------------------------- + * + * Base is either 10 (default) or 16 (with 0x prefix). There is no octal + * (base 8), as per the ACPI specification. + * + * Examples: + * to_integer ("1000") Decimal + * to_integer ("0xABCD") Hex + * + * Rules extracted from the ACPI specification: + * + * 1) Thi input string is either a decimal or hexadecimal numeric string. + * A hex value must be prefixed by "0x" or it is interpreted as decimal. + * + * 2) The value must not exceed the maximum of an integer value + * (32 or 64 bits). The ACPI specification states the behavior is + * "unpredictable", so ACPICA matches the behavior of the implicit + * conversion case. There are no numeric overflow conditions. (NO ERROR) + * + * 3) Behavior on the first non-hex character is not specified by the ACPI + * specification (for the to_integer operator), so ACPICA matches the + * behavior of the implicit conversion case. It terminates the + * conversion and returns the current accumulated value of the converted + * integer. (NO ERROR) * - * PARAMETERS: string - Null terminated input string - * flags - conversion info + * 4) Conversion of a null (zero-length) string to an integer is + * technically allowed. However, ACPICA allows as an ACPI extension. + * The conversion returns the value 0. (NO ERROR) * - * RETURN: 64-bit converted integer + * Note: there are no error conditions returned by this function. At + * the minimum, a value of zero is returned. * - * DESCRIPTION: Performs a base 16 conversion of the input string to an - * integer value, either 32 or 64 bits. - * Note: String must be valid and non-null. + * Current users of this function: + * + * interpreter - Runtime ASL to_integer operator, as per the ACPI specification * ******************************************************************************/ -static u64 acpi_ut_strtoul_base16(char *string, u32 flags) +u64 acpi_ut_explicit_strtoul64(char *string) { - int ascii_digit; - u32 valid_digits = 1; - u64 return_value = 0; - - /* Main loop: convert each ASCII byte in the input string */ - - while (*string) { - - /* Check for overflow (32 or 64 bit) - return current converted value */ - - if ((valid_digits > 16) || - ((valid_digits > 8) && (flags & ACPI_STRTOUL_32BIT))) { - goto exit; - } - - ascii_digit = *string; - if (!isxdigit(ascii_digit)) { - - /* Not Hex ASCII A-F, a-f, or 0-9, terminate */ + u64 converted_integer = 0; + u32 base = 10; /* Default is decimal */ - goto exit; - } + ACPI_FUNCTION_TRACE_STR(ut_explicit_strtoul64, string); - /* Convert and insert the hex digit */ + /* + * Only Hex and Decimal are supported, as per the ACPI specification. + * 0x prefix means hex; otherwise decimal is assumed. + */ + if (acpi_ut_detect_hex_prefix(&string)) { + base = 16; + } - acpi_ut_short_shift_left(return_value, 4, &return_value); - return_value |= acpi_ut_ascii_char_to_hex(ascii_digit); + if (!acpi_ut_remove_leading_zeros(&string)) { + return_VALUE(0); + } - string++; - valid_digits++; + /* + * Ignore overflow as per the ACPI specification. This is implemented by + * ignoring the return status below. On overflow, the input string is + * simply truncated. + */ + switch (base) { + case 10: + default: + acpi_ut_convert_decimal_string(string, &converted_integer); + break; + + case 16: + acpi_ut_convert_hex_string(string, &converted_integer); + break; } -exit: - return (return_value); + return_VALUE(converted_integer); } diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index ad54610ea6cd..17d61b1f2511 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -126,8 +126,12 @@ struct acpi_exception_info { #define AE_NOT_CONFIGURED EXCEP_ENV (0x001C) #define AE_ACCESS EXCEP_ENV (0x001D) #define AE_IO_ERROR EXCEP_ENV (0x001E) +#define AE_NUMERIC_OVERFLOW EXCEP_ENV (0x001F) +#define AE_HEX_OVERFLOW EXCEP_ENV (0x0020) +#define AE_DECIMAL_OVERFLOW EXCEP_ENV (0x0021) +#define AE_OCTAL_OVERFLOW EXCEP_ENV (0x0022) -#define AE_CODE_ENV_MAX 0x001E +#define AE_CODE_ENV_MAX 0x0022 /* * Programmer exceptions @@ -263,7 +267,15 @@ static const struct acpi_exception_info acpi_gbl_exception_names_env[] = { EXCEP_TXT("AE_NOT_CONFIGURED", "The interface is not part of the current subsystem configuration"), EXCEP_TXT("AE_ACCESS", "Permission denied for the requested operation"), - EXCEP_TXT("AE_IO_ERROR", "An I/O error occurred") + EXCEP_TXT("AE_IO_ERROR", "An I/O error occurred"), + EXCEP_TXT("AE_NUMERIC_OVERFLOW", + "Overflow during string-to-integer conversion"), + EXCEP_TXT("AE_HEX_OVERFLOW", + "Overflow during ASCII hex-to-binary conversion"), + EXCEP_TXT("AE_DECIMAL_OVERFLOW", + "Overflow during ASCII decimal-to-binary conversion"), + EXCEP_TXT("AE_OCTAL_OVERFLOW", + "Overflow during ASCII octal-to-binary conversion") }; static const struct acpi_exception_info acpi_gbl_exception_names_pgm[] = { diff --git a/tools/power/acpi/tools/acpidump/Makefile b/tools/power/acpi/tools/acpidump/Makefile index f7c7af1f9258..b436f8675f6a 100644 --- a/tools/power/acpi/tools/acpidump/Makefile +++ b/tools/power/acpi/tools/acpidump/Makefile @@ -39,6 +39,7 @@ TOOL_OBJS = \ utnonansi.o\ utprint.o\ utstring.o\ + utstrsuppt.o\ utstrtoul64.o\ utxferror.o\ oslinuxtbl.o\ diff --git a/tools/power/acpi/tools/acpidump/apdump.c b/tools/power/acpi/tools/acpidump/apdump.c index 60df1fbd4a77..0634449156d8 100644 --- a/tools/power/acpi/tools/acpidump/apdump.c +++ b/tools/power/acpi/tools/acpidump/apdump.c @@ -287,8 +287,7 @@ int ap_dump_table_by_address(char *ascii_address) /* Convert argument to an integer physical address */ - status = acpi_ut_strtoul64(ascii_address, ACPI_STRTOUL_64BIT, - &long_address); + status = acpi_ut_strtoul64(ascii_address, &long_address); if (ACPI_FAILURE(status)) { fprintf(stderr, "%s: Could not convert to a physical address\n", ascii_address); diff --git a/tools/power/acpi/tools/acpidump/apmain.c b/tools/power/acpi/tools/acpidump/apmain.c index 943b6b614683..22c3b4ee1617 100644 --- a/tools/power/acpi/tools/acpidump/apmain.c +++ b/tools/power/acpi/tools/acpidump/apmain.c @@ -208,9 +208,7 @@ static int ap_do_options(int argc, char **argv) case 'r': /* Dump tables from specified RSDP */ status = - acpi_ut_strtoul64(acpi_gbl_optarg, - ACPI_STRTOUL_64BIT, - &gbl_rsdp_base); + acpi_ut_strtoul64(acpi_gbl_optarg, &gbl_rsdp_base); if (ACPI_FAILURE(status)) { fprintf(stderr, "%s: Could not convert to a physical address\n", -- cgit v1.2.1 From 72a2935502cc0f23567df649ebc644038d24abcf Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 20 Sep 2017 10:00:43 +0800 Subject: ACPICA: String conversions: Cleanup/format comments. No functional changes ACPICA commit 33e38cd2406709b13fa0a7821e588505b3771163 Cleanup some of the language used in the large comments, especially the ones that reference the rules in the ACPI spec. Fixed some typos. Link: https://github.com/acpica/acpica/commit/33e38cd24067 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/utstrsuppt.c | 48 ++++++++---------- drivers/acpi/acpica/utstrtoul64.c | 104 +++++++++++++++++++------------------- 2 files changed, 74 insertions(+), 78 deletions(-) diff --git a/drivers/acpi/acpica/utstrsuppt.c b/drivers/acpi/acpica/utstrsuppt.c index ca41f037fd9a..2526ba3b4f12 100644 --- a/drivers/acpi/acpica/utstrsuppt.c +++ b/drivers/acpi/acpica/utstrsuppt.c @@ -1,6 +1,6 @@ /******************************************************************************* * - * Module Name: utstrsuppt - string-to-integer conversion support functions + * Module Name: utstrsuppt - Support functions for string-to-integer conversion * ******************************************************************************/ @@ -83,7 +83,7 @@ acpi_status acpi_ut_convert_octal_string(char *string, u64 *return_value_ptr) while (*string) { - /* Must be ASCII 0-7, otherwise terminate with no error */ + /* Character must be ASCII 0-7, otherwise terminate with no error */ if (!(ACPI_IS_OCTAL_DIGIT(*string))) { break; @@ -132,7 +132,7 @@ acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr) while (*string) { - /* Must be ASCII 0-9, otherwise terminate with no error */ + /* Character must be ASCII 0-9, otherwise terminate with no error */ if (!isdigit(*string)) { break; @@ -210,18 +210,17 @@ acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr) * * PARAMETERS: string - Pointer to input ASCII string * - * RETURN: Next character after the leading zeros. This behavior may be - * Used by the caller to detect end-of-string. + * RETURN: Next character after any leading zeros. This character may be + * used by the caller to detect end-of-string. * - * DESCRIPTION: Remove all leading zeros in the input string. Return the - * next character after the final zero to check for the end - * of the string (NULL terminator). + * DESCRIPTION: Remove any leading zeros in the input string. Return the + * next character after the final ASCII zero to enable the caller + * to check for the end of the string (NULL terminator). * ******************************************************************************/ char acpi_ut_remove_leading_zeros(char **string) { - /* Skip all leading zeros */ while (**string == ACPI_ASCII_ZERO) { *string += 1; @@ -236,9 +235,9 @@ char acpi_ut_remove_leading_zeros(char **string) * * PARAMETERS: string - Pointer to input ASCII string * - * RETURN: TRUE if a 0x prefix was found + * RETURN: TRUE if a "0x" prefix was found at the start of the string * - * DESCRIPTION: Detect and remove a hex 0x prefix + * DESCRIPTION: Detect and remove a hex "0x" prefix * ******************************************************************************/ @@ -260,7 +259,8 @@ u8 acpi_ut_detect_hex_prefix(char **string) * * PARAMETERS: string - Pointer to input ASCII string * - * RETURN: True if an octal 0 prefix was found + * RETURN: True if an octal "0" prefix was found at the start of the + * string * * DESCRIPTION: Detect and remove an octal prefix (zero) * @@ -282,23 +282,22 @@ u8 acpi_ut_detect_octal_prefix(char **string) * FUNCTION: acpi_ut_insert_digit * * PARAMETERS: accumulated_value - Current value of the integer value - * accumulator. The New value is + * accumulator. The new value is * returned here. - * base - Radix, either 8/10/16 supported + * base - Radix, either 8/10/16 * ascii_digit - ASCII single digit to be inserted * - * RETURN: Status and result of convert/insert operation. The only - * exception is numeric overflow of either the multiply or the - * add operations. + * RETURN: Status and result of the convert/insert operation. The only + * possible returned exception code is numeric overflow of + * either the multiply or add conversion operations. * * DESCRIPTION: Generic conversion and insertion function for all bases: * - * 1) Multiply the current accumulated converted value by the + * 1) Multiply the current accumulated/converted value by the * base in order to make room for the new character. * - * 2) Add the current accumulated/converted value the new - * character (after the character has been converted to a binary - * value). + * 2) Convert the new character to binary and add it to the + * current accumulated value. * * Note: The only possible exception indicates an integer * overflow (AE_NUMERIC_OVERFLOW) @@ -318,17 +317,14 @@ acpi_ut_insert_digit(u64 *accumulated_value, u32 base, int ascii_digit) return (status); } - /* Add in the new digit, and store to the caller's accumulated value */ + /* Add in the new digit, and store the sum to the accumulated value */ status = acpi_ut_strtoul_add64(product, acpi_ut_ascii_char_to_hex(ascii_digit), accumulated_value); - if (ACPI_FAILURE(status)) { - return (status); - } - return (AE_OK); + return (status); } /******************************************************************************* diff --git a/drivers/acpi/acpica/utstrtoul64.c b/drivers/acpi/acpica/utstrtoul64.c index e5a2df3f16e5..67a39d97a6d6 100644 --- a/drivers/acpi/acpica/utstrtoul64.c +++ b/drivers/acpi/acpica/utstrtoul64.c @@ -1,7 +1,7 @@ /******************************************************************************* * - * Module Name: utstrtoul64 - string-to-integer support for both 64-bit - * and 32-bit integers + * Module Name: utstrtoul64 - String-to-integer conversion support for both + * 64-bit and 32-bit integers * ******************************************************************************/ @@ -50,21 +50,23 @@ ACPI_MODULE_NAME("utstrtoul64") /******************************************************************************* * - * This module contains the external string to 64/32-bit unsigned integer + * This module contains the top-level string to 64/32-bit unsigned integer * conversion functions: * - * 1) Standard strtoul() function with 64-bit support. This is mostly used by - * the iASL compiler. + * 1) A standard strtoul() function that supports 64-bit integers, base + * 8/10/16, with integer overflow support. This is used mainly by the + * iASL compiler, which implements tighter constraints on integer + * constants than the runtime (interpreter) integer-to-string conversions. * 2) Runtime "Explicit conversion" as defined in the ACPI specification. * 3) Runtime "Implicit conversion" as defined in the ACPI specification. * * Current users of this module: * + * iASL - Preprocessor (constants and math expressions) + * iASL - Main parser, conversion of constants to integers + * iASL - Data Table Compiler parser (constants and math expressions) * interpreter - Implicit and explicit conversions, GPE method names * debugger - Command line input string conversion - * iASL - Main parser, conversion of constants to integers - * iASL - Data Table Compiler parser (constant math expressions) - * iASL - Preprocessor (constant math expressions) * acpi_dump - Input table addresses * acpi_exec - Testing of the acpi_ut_strtoul64 function * @@ -77,15 +79,17 @@ ACPI_MODULE_NAME("utstrtoul64") * a 64-bit constant is wrongly defined in a 32-bit DSDT/SSDT. * * In ACPI, the only place where octal numbers are supported is within - * the ASL language itself. There is no runtime support for octal. + * the ASL language itself. This is implemented via the main acpi_ut_strtoul64 + * interface. According the ACPI specification, there is no ACPI runtime + * support for octal string conversions. * ******************************************************************************/ /******************************************************************************* * * FUNCTION: acpi_ut_strtoul64 * - * PARAMETERS: string - Null terminated input string. - * Must be a valid pointer + * PARAMETERS: string - Null terminated input string, + * must be a valid pointer * return_value - Where the converted integer is * returned. Must be a valid pointer * @@ -98,9 +102,9 @@ ACPI_MODULE_NAME("utstrtoul64") * * Current users of this function: * - * iASL - Preprocessor (constant math expressions) - * iASL - Main parser, conversion of ASL constants to integers - * iASL - Data Table Compiler parser (constant math expressions) + * iASL - Preprocessor (constants and math expressions) + * iASL - Main ASL parser, conversion of ASL constants to integers + * iASL - Data Table Compiler parser (constants and math expressions) * ******************************************************************************/ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) @@ -112,17 +116,14 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) *return_value = 0; - /* Null return string returns a value of zero */ + /* A NULL return string returns a value of zero */ if (*string == 0) { return_ACPI_STATUS(AE_OK); } /* - * 1) The "0x" prefix indicates base 16. Per the ACPI specification, - * the "0x" prefix is only allowed for implicit (non-strict) conversions. - * However, we always allow it for compatibility with older ACPICA and - * just plain on principle. + * 1) Check for a hex constant. A "0x" prefix indicates base 16. */ if (acpi_ut_detect_hex_prefix(&string)) { base = 16; @@ -130,7 +131,7 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) /* * 2) Check for an octal constant, defined to be a leading zero - * followed by an valid octal digit (0-7) + * followed by sequence of octal digits (0-7) */ else if (acpi_ut_detect_octal_prefix(&string)) { base = 8; @@ -142,7 +143,7 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) /* * Perform the base 8, 10, or 16 conversion. A numeric overflow will - * return an exception. + * return an exception (to allow iASL to flag the statement). */ switch (base) { case 8: @@ -154,11 +155,8 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) break; case 16: - status = acpi_ut_convert_hex_string(string, return_value); - break; - default: - status = AE_AML_INTERNAL; /* Should never happen */ + status = acpi_ut_convert_hex_string(string, return_value); break; } @@ -169,8 +167,8 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) * * FUNCTION: acpi_ut_implicit_strtoul64 * - * PARAMETERS: string - Null terminated input string. - * Must be a valid pointer + * PARAMETERS: string - Null terminated input string, + * must be a valid pointer * * RETURN: Converted integer * @@ -178,42 +176,44 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) * an "implicit conversion" by the ACPI specification. Used by * many ASL operators that require an integer operand, and support * an automatic (implicit) conversion from a string operand - * to the final integer operand. The restriction is that only - * hex strings are supported. + * to the final integer operand. The major restriction is that + * only hex strings are supported. * * ----------------------------------------------------------------------------- * - * Base is always 16, either with or without the 0x prefix. + * Base is always 16, either with or without the 0x prefix. Decimal and + * Octal strings are not supported, as per the ACPI specification. * * Examples (both are hex values): * Add ("BA98", Arg0, Local0) * Subtract ("0x12345678", Arg1, Local1) * - * Rules extracted from the ACPI specification: + * Conversion rules as extracted from the ACPI specification: * * The converted integer is initialized to the value zero. - * The ASCII string is interpreted as a hexadecimal constant. + * The ASCII string is always interpreted as a hexadecimal constant. * - * 1) A "0x" prefix is not allowed. However, ACPICA allows this as an - * ACPI extension on general principle. (NO ERROR) + * 1) According to the ACPI specification, a "0x" prefix is not allowed. + * However, ACPICA allows this as an ACPI extension on general + * principle. (NO ERROR) * - * 2) Terminates when the size of an integer is reached (32 or 64 bits). - * There are no numeric overflow conditions. (NO ERROR) + * 2) The conversion terminates when the size of an integer is reached + * (32 or 64 bits). There are no numeric overflow conditions. (NO ERROR) * * 3) The first non-hex character terminates the conversion and returns * the current accumulated value of the converted integer (NO ERROR). * * 4) Conversion of a null (zero-length) string to an integer is - * technically allowed. However, ACPICA allows as an ACPI extension. - * The conversion returns the value 0. (NO ERROR) + * technically not allowed. However, ACPICA allows this as an ACPI + * extension. The conversion returns the value 0. (NO ERROR) * - * Note: there are no error conditions returned by this function. At + * NOTE: There are no error conditions returned by this function. At * the minimum, a value of zero is returned. * * Current users of this function: * * interpreter - All runtime implicit conversions, as per ACPI specification - * iASL - Data Table Compiler parser (constant math expressions) + * iASL - Data Table Compiler parser (constants and math expressions) * ******************************************************************************/ @@ -247,8 +247,8 @@ u64 acpi_ut_implicit_strtoul64(char *string) * * FUNCTION: acpi_ut_explicit_strtoul64 * - * PARAMETERS: string - Null terminated input string. - * Must be a valid pointer + * PARAMETERS: string - Null terminated input string, + * must be a valid pointer * * RETURN: Converted integer * @@ -258,16 +258,16 @@ u64 acpi_ut_implicit_strtoul64(char *string) * * ----------------------------------------------------------------------------- * - * Base is either 10 (default) or 16 (with 0x prefix). There is no octal - * (base 8), as per the ACPI specification. + * Base is either 10 (default) or 16 (with 0x prefix). Octal (base 8) strings + * are not supported, as per the ACPI specification. * * Examples: * to_integer ("1000") Decimal * to_integer ("0xABCD") Hex * - * Rules extracted from the ACPI specification: + * Conversion rules as extracted from the ACPI specification: * - * 1) Thi input string is either a decimal or hexadecimal numeric string. + * 1) The input string is either a decimal or hexadecimal numeric string. * A hex value must be prefixed by "0x" or it is interpreted as decimal. * * 2) The value must not exceed the maximum of an integer value @@ -275,18 +275,18 @@ u64 acpi_ut_implicit_strtoul64(char *string) * "unpredictable", so ACPICA matches the behavior of the implicit * conversion case. There are no numeric overflow conditions. (NO ERROR) * - * 3) Behavior on the first non-hex character is not specified by the ACPI + * 3) Behavior on the first non-hex character is not defined by the ACPI * specification (for the to_integer operator), so ACPICA matches the * behavior of the implicit conversion case. It terminates the * conversion and returns the current accumulated value of the converted * integer. (NO ERROR) * * 4) Conversion of a null (zero-length) string to an integer is - * technically allowed. However, ACPICA allows as an ACPI extension. - * The conversion returns the value 0. (NO ERROR) + * technically not allowed. However, ACPICA allows this as an ACPI + * extension. The conversion returns the value 0. (NO ERROR) * - * Note: there are no error conditions returned by this function. At - * the minimum, a value of zero is returned. + * NOTE: There are no error conditions returned by this function. At the + * minimum, a value of zero is returned. * * Current users of this function: * @@ -303,7 +303,7 @@ u64 acpi_ut_explicit_strtoul64(char *string) /* * Only Hex and Decimal are supported, as per the ACPI specification. - * 0x prefix means hex; otherwise decimal is assumed. + * A "0x" prefix indicates hex; otherwise decimal is assumed. */ if (acpi_ut_detect_hex_prefix(&string)) { base = 16; -- cgit v1.2.1 From c2e56e54b2b426fdce62e1a08a77ce8e6f4b915c Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 20 Sep 2017 10:00:49 +0800 Subject: ACPICA: String conversions: Update to add new behaviors ACPICA commit e3574138af82a25d76324559848689946982dbd0 1) Allow whitespace in string before the constant 2) ut_strtoul64 now always creates a 64-bit integer; iASL will truncate this to the lower 32-bits if the table being compiled is a 32-bit table (DSDT revision less than 2). Link: https://github.com/acpica/acpica/commit/e3574138af82 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/acutils.h | 2 ++ drivers/acpi/acpica/utstrsuppt.c | 25 ++++++++++++++ drivers/acpi/acpica/utstrtoul64.c | 72 +++++++++++++++++++++++++++------------ 3 files changed, 78 insertions(+), 21 deletions(-) diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 7a568c604a75..83b75e9db7ef 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -211,6 +211,8 @@ acpi_status acpi_ut_convert_decimal_string(char *string, u64 *return_value_ptr); acpi_status acpi_ut_convert_hex_string(char *string, u64 *return_value_ptr); +char acpi_ut_remove_whitespace(char **string); + char acpi_ut_remove_leading_zeros(char **string); u8 acpi_ut_detect_hex_prefix(char **string); diff --git a/drivers/acpi/acpica/utstrsuppt.c b/drivers/acpi/acpica/utstrsuppt.c index 2526ba3b4f12..965fb5cec94f 100644 --- a/drivers/acpi/acpica/utstrsuppt.c +++ b/drivers/acpi/acpica/utstrsuppt.c @@ -229,6 +229,31 @@ char acpi_ut_remove_leading_zeros(char **string) return (**string); } +/******************************************************************************* + * + * FUNCTION: acpi_ut_remove_whitespace + * + * PARAMETERS: string - Pointer to input ASCII string + * + * RETURN: Next character after any whitespace. This character may be + * used by the caller to detect end-of-string. + * + * DESCRIPTION: Remove any leading whitespace in the input string. Return the + * next character after the final ASCII zero to enable the caller + * to check for the end of the string (NULL terminator). + * + ******************************************************************************/ + +char acpi_ut_remove_whitespace(char **string) +{ + + while (isspace((u8)**string)) { + *string += 1; + } + + return (**string); +} + /******************************************************************************* * * FUNCTION: acpi_ut_detect_hex_prefix diff --git a/drivers/acpi/acpica/utstrtoul64.c b/drivers/acpi/acpica/utstrtoul64.c index 67a39d97a6d6..e2067dcb9389 100644 --- a/drivers/acpi/acpica/utstrtoul64.c +++ b/drivers/acpi/acpica/utstrtoul64.c @@ -66,22 +66,25 @@ ACPI_MODULE_NAME("utstrtoul64") * iASL - Main parser, conversion of constants to integers * iASL - Data Table Compiler parser (constants and math expressions) * interpreter - Implicit and explicit conversions, GPE method names + * interpreter - Repair code for return values from predefined names * debugger - Command line input string conversion - * acpi_dump - Input table addresses - * acpi_exec - Testing of the acpi_ut_strtoul64 function + * acpi_dump - ACPI table physical addresses + * acpi_exec - Support for namespace overrides * * Notes concerning users of these interfaces: * - * acpi_gbl_integer_byte_width is used to set the 32/64 bit limit. This global - * must be set to the proper width. For the core ACPICA code, the width - * depends on the DSDT version. For iASL, the default width is 64 bits for - * all parsers, but error checking is performed later to flag cases where - * a 64-bit constant is wrongly defined in a 32-bit DSDT/SSDT. + * acpi_gbl_integer_byte_width is used to set the 32/64 bit limit for explicit + * and implicit conversions. This global must be set to the proper width. + * For the core ACPICA code, the width depends on the DSDT version. For the + * acpi_ut_strtoul64 interface, all conversions are 64 bits. This interface is + * used primarily for iASL, where the default width is 64 bits for all parsers, + * but error checking is performed later to flag cases where a 64-bit constant + * is wrongly defined in a 32-bit DSDT/SSDT. * - * In ACPI, the only place where octal numbers are supported is within - * the ASL language itself. This is implemented via the main acpi_ut_strtoul64 - * interface. According the ACPI specification, there is no ACPI runtime - * support for octal string conversions. + * In ACPI, the only place where octal numbers are supported is within + * the ASL language itself. This is implemented via the main acpi_ut_strtoul64 + * interface. According the ACPI specification, there is no ACPI runtime + * support (explicit/implicit) for octal string conversions. * ******************************************************************************/ /******************************************************************************* @@ -93,11 +96,11 @@ ACPI_MODULE_NAME("utstrtoul64") * return_value - Where the converted integer is * returned. Must be a valid pointer * - * RETURN: Status and converted integer - * Returns an exception on numeric overflow + * RETURN: Status and converted integer. Returns an exception on a + * 64-bit numeric overflow * - * DESCRIPTION: Convert a string into an unsigned integer. Performs either a - * 32-bit or 64-bit conversion, depending on the current global + * DESCRIPTION: Convert a string into an unsigned integer. Always performs a + * full 64-bit conversion, regardless of the current global * integer width. Supports Decimal, Hex, and Octal strings. * * Current users of this function: @@ -105,11 +108,15 @@ ACPI_MODULE_NAME("utstrtoul64") * iASL - Preprocessor (constants and math expressions) * iASL - Main ASL parser, conversion of ASL constants to integers * iASL - Data Table Compiler parser (constants and math expressions) + * interpreter - Repair code for return values from predefined names + * acpi_dump - ACPI table physical addresses + * acpi_exec - Support for namespace overrides * ******************************************************************************/ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) { acpi_status status = AE_OK; + u8 original_bit_width; u32 base = 10; /* Default is decimal */ ACPI_FUNCTION_TRACE_STR(ut_strtoul64, string); @@ -122,6 +129,10 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) return_ACPI_STATUS(AE_OK); } + if (!acpi_ut_remove_whitespace(&string)) { + return_ACPI_STATUS(AE_OK); + } + /* * 1) Check for a hex constant. A "0x" prefix indicates base 16. */ @@ -142,8 +153,16 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) } /* - * Perform the base 8, 10, or 16 conversion. A numeric overflow will - * return an exception (to allow iASL to flag the statement). + * Force a full 64-bit conversion. The caller (usually iASL) must + * check for a 32-bit overflow later as necessary (If current mode + * is 32-bit, meaning a 32-bit DSDT). + */ + original_bit_width = acpi_gbl_integer_bit_width; + acpi_gbl_integer_bit_width = 64; + + /* + * Perform the base 8, 10, or 16 conversion. A 64-bit numeric overflow + * will return an exception (to allow iASL to flag the statement). */ switch (base) { case 8: @@ -160,6 +179,9 @@ acpi_status acpi_ut_strtoul64(char *string, u64 *return_value) break; } + /* Only possible exception from above is a 64-bit overflow */ + + acpi_gbl_integer_bit_width = original_bit_width; return_ACPI_STATUS(status); } @@ -223,6 +245,10 @@ u64 acpi_ut_implicit_strtoul64(char *string) ACPI_FUNCTION_TRACE_STR(ut_implicit_strtoul64, string); + if (!acpi_ut_remove_whitespace(&string)) { + return_VALUE(0); + } + /* * Per the ACPI specification, only hexadecimal is supported for * implicit conversions, and the "0x" prefix is "not allowed". @@ -236,8 +262,8 @@ u64 acpi_ut_implicit_strtoul64(char *string) /* * Ignore overflow as per the ACPI specification. This is implemented by - * ignoring the return status below. On overflow, the input string is - * simply truncated. + * ignoring the return status from the conversion function called below. + * On overflow, the input string is simply truncated. */ acpi_ut_convert_hex_string(string, &converted_integer); return_VALUE(converted_integer); @@ -301,6 +327,10 @@ u64 acpi_ut_explicit_strtoul64(char *string) ACPI_FUNCTION_TRACE_STR(ut_explicit_strtoul64, string); + if (!acpi_ut_remove_whitespace(&string)) { + return_VALUE(0); + } + /* * Only Hex and Decimal are supported, as per the ACPI specification. * A "0x" prefix indicates hex; otherwise decimal is assumed. @@ -315,8 +345,8 @@ u64 acpi_ut_explicit_strtoul64(char *string) /* * Ignore overflow as per the ACPI specification. This is implemented by - * ignoring the return status below. On overflow, the input string is - * simply truncated. + * ignoring the return status from the conversion functions called below. + * On overflow, the input string is simply truncated. */ switch (base) { case 10: -- cgit v1.2.1 From 8092936dacde0fd00e201390f30d8c219b818f36 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 20 Sep 2017 10:00:56 +0800 Subject: ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read ACPICA commit 1cdcf16447c15694faa564c0cd8e357b910344a0 Return value from acpi_hw_read is now 64 bits, but the ACPI PM Timer is defined by the ACPI spec to be 32 bits. Link: https://github.com/acpica/acpica/commit/1cdcf16447c1 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/hwtimer.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index b3c5d8c754bb..a2f4e25d45b1 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -94,6 +94,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_timer_resolution) acpi_status acpi_get_timer(u32 * ticks) { acpi_status status; + u64 timer_value; ACPI_FUNCTION_TRACE(acpi_get_timer); @@ -107,7 +108,14 @@ acpi_status acpi_get_timer(u32 * ticks) return_ACPI_STATUS(AE_SUPPORT); } - status = acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_read(&timer_value, &acpi_gbl_FADT.xpm_timer_block); + if (ACPI_SUCCESS(status)) { + + /* ACPI PM Timer is defined to be 32 bits (PM_TMR_LEN) */ + + *ticks = (u32)timer_value; + } + return_ACPI_STATUS(status); } -- cgit v1.2.1 From d954f94cfa4488f4281db2b698d90e1b03facb4d Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 20 Sep 2017 10:01:02 +0800 Subject: ACPICA: Update version to 20170831 ACPICA commit faa9fdfbd035a14347e6a875be2a0cddb3e6fc00 Version 20170831. Link: https://github.com/acpica/acpica/commit/faa9fdfbd035 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- include/acpi/acpixf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 53c5e2f7bcec..e1dd1a8d42b6 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -46,7 +46,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20170728 +#define ACPI_CA_VERSION 0x20170831 #include #include -- cgit v1.2.1 From 095f613c6b386a1704b73a549e9ba66c1d5381ae Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 25 Sep 2017 02:06:19 -0600 Subject: ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq() Match up with what 7edda0886b ("acpi: apei: handle SEA notification type for ARMv8") did for ghes_ioremap_pfn_nmi(). Signed-off-by: Jan Beulich Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/ghes.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 3c3a37b8503b..69ef0b6bf25d 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -174,7 +174,8 @@ static void __iomem *ghes_ioremap_pfn_nmi(u64 pfn) static void __iomem *ghes_ioremap_pfn_irq(u64 pfn) { - unsigned long vaddr, paddr; + unsigned long vaddr; + phys_addr_t paddr; pgprot_t prot; vaddr = (unsigned long)GHES_IOREMAP_IRQ_PAGE(ghes_ioremap_area->addr); -- cgit v1.2.1 From 1c3b44c0f40d22b43fa58fe7081ca36e38449114 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 19 Oct 2017 13:23:21 +0200 Subject: ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions Recently produced GPD win devices have a new BIOS, research into the changes in this BIOS has found a ChangeLog which shows that the disabling of the KIOX000A node has been done starting with the 20170221 version. Unfortunately the GPD pocket uses the exact same DMI strings as the win and its BIOS was copy-pasted from the GPD win, so it has a disabled KIOX000A node which we should not enable, so we need to check for the exact BIOS date. This commit adds 2 extra entries to the always_present_ids quirk table with bios_date matches for the older also affected and the latest BIOS. Reported-by: ReddestDream Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/x86/utils.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index b4fbb9929482..ec5b0f190231 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -71,18 +71,34 @@ static const struct always_present_id always_present_ids[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"), }), /* - * The GPD win BIOS dated 20170320 has disabled the accelerometer, the + * The GPD win BIOS dated 20170221 has disabled the accelerometer, the * drivers sometimes cause crashes under Windows and this is how the * manufacturer has solved this :| Note that the the DMI data is less * generic then it seems, a board_vendor of "AMI Corporation" is quite * rare and a board_name of "Default String" also is rare. + * + * Unfortunately the GPD pocket also uses these strings and its BIOS + * was copy-pasted from the GPD win, so it has a disabled KIOX000A + * node which we should not enable, thus we also check the BIOS date. */ + ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Default string"), + DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), + DMI_MATCH(DMI_BIOS_DATE, "02/21/2017") + }), ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), { DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), DMI_MATCH(DMI_BOARD_NAME, "Default string"), DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), DMI_MATCH(DMI_BIOS_DATE, "03/20/2017") }), + ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Default string"), + DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), + DMI_MATCH(DMI_BIOS_DATE, "05/25/2017") + }), }; bool acpi_device_always_present(struct acpi_device *adev) -- cgit v1.2.1 From c49870e89f4d2c21c76ebe90568246bb0f3572b7 Mon Sep 17 00:00:00 2001 From: Dongjiu Geng Date: Tue, 17 Oct 2017 16:02:20 +0800 Subject: ACPI / APEI: remove the unused dead-code for SEA/NMI notification type For the SEA notification, the two functions ghes_sea_add() and ghes_sea_remove() are only called when CONFIG_ACPI_APEI_SEA is defined. If not, it will return errors in the ghes_probe() and not continue. If the probe is failed, the ghes_sea_remove() also has no chance to be called. Hence, remove the unnecessary handling when CONFIG_ACPI_APEI_SEA is not defined. For the NMI notification, it has the same issue as SEA notification, so also remove the unused dead-code for it. Signed-off-by: Dongjiu Geng Tested-by: Tyler Baicar Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/ghes.c | 33 +++++---------------------------- 1 file changed, 5 insertions(+), 28 deletions(-) diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 69ef0b6bf25d..cb7aceae3553 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -852,17 +852,8 @@ static void ghes_sea_remove(struct ghes *ghes) synchronize_rcu(); } #else /* CONFIG_ACPI_APEI_SEA */ -static inline void ghes_sea_add(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to add SEA notification which is not supported\n", - ghes->generic->header.source_id); -} - -static inline void ghes_sea_remove(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to remove SEA notification which is not supported\n", - ghes->generic->header.source_id); -} +static inline void ghes_sea_add(struct ghes *ghes) { } +static inline void ghes_sea_remove(struct ghes *ghes) { } #endif /* CONFIG_ACPI_APEI_SEA */ #ifdef CONFIG_HAVE_ACPI_APEI_NMI @@ -1064,23 +1055,9 @@ static void ghes_nmi_init_cxt(void) init_irq_work(&ghes_proc_irq_work, ghes_proc_in_irq); } #else /* CONFIG_HAVE_ACPI_APEI_NMI */ -static inline void ghes_nmi_add(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to add NMI notification which is not supported!\n", - ghes->generic->header.source_id); - BUG(); -} - -static inline void ghes_nmi_remove(struct ghes *ghes) -{ - pr_err(GHES_PFX "ID: %d, trying to remove NMI notification which is not supported!\n", - ghes->generic->header.source_id); - BUG(); -} - -static inline void ghes_nmi_init_cxt(void) -{ -} +static inline void ghes_nmi_add(struct ghes *ghes) { } +static inline void ghes_nmi_remove(struct ghes *ghes) { } +static inline void ghes_nmi_init_cxt(void) { } #endif /* CONFIG_HAVE_ACPI_APEI_NMI */ static int ghes_probe(struct platform_device *ghes_dev) -- cgit v1.2.1 From 4f89fa286f6729312e227e7c2d764e8e7b9d340e Mon Sep 17 00:00:00 2001 From: James Morse Date: Mon, 6 Nov 2017 18:44:24 +0000 Subject: ACPI / APEI: Replace ioremap_page_range() with fixmap Replace ghes_io{re,un}map_pfn_{nmi,irq}()s use of ioremap_page_range() with __set_fixmap() as ioremap_page_range() may sleep to allocate a new level of page-table, even if its passed an existing final-address to use in the mapping. The GHES driver can only be enabled for architectures that select HAVE_ACPI_APEI: Add fixmap entries to both x86 and arm64. clear_fixmap() does the TLB invalidation in __set_fixmap() for arm64 and __set_pte_vaddr() for x86. In each case its the same as the respective arch_apei_flush_tlb_one(). Reported-by: Fengguang Wu Suggested-by: Linus Torvalds Signed-off-by: James Morse Reviewed-by: Borislav Petkov Tested-by: Tyler Baicar Tested-by: Toshi Kani [ For the arm64 bits: ] Acked-by: Will Deacon [ For the x86 bits: ] Acked-by: Ingo Molnar Signed-off-by: Rafael J. Wysocki Cc: All applicable --- arch/arm64/include/asm/fixmap.h | 7 +++++++ arch/x86/include/asm/fixmap.h | 6 ++++++ drivers/acpi/apei/ghes.c | 44 +++++++++++++---------------------------- 3 files changed, 27 insertions(+), 30 deletions(-) diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h index caf86be815ba..4052ec39e8db 100644 --- a/arch/arm64/include/asm/fixmap.h +++ b/arch/arm64/include/asm/fixmap.h @@ -51,6 +51,13 @@ enum fixed_addresses { FIX_EARLYCON_MEM_BASE, FIX_TEXT_POKE0, + +#ifdef CONFIG_ACPI_APEI_GHES + /* Used for GHES mapping from assorted contexts */ + FIX_APEI_GHES_IRQ, + FIX_APEI_GHES_NMI, +#endif /* CONFIG_ACPI_APEI_GHES */ + __end_of_permanent_fixed_addresses, /* diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index dcd9fb55e679..b0c505fe9a95 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -104,6 +104,12 @@ enum fixed_addresses { FIX_GDT_REMAP_BEGIN, FIX_GDT_REMAP_END = FIX_GDT_REMAP_BEGIN + NR_CPUS - 1, +#ifdef CONFIG_ACPI_APEI_GHES + /* Used for GHES mapping from assorted contexts */ + FIX_APEI_GHES_IRQ, + FIX_APEI_GHES_NMI, +#endif + __end_of_permanent_fixed_addresses, /* diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index cb7aceae3553..572b6c7303ed 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -51,6 +51,7 @@ #include #include #include +#include #include #include @@ -112,7 +113,7 @@ static DEFINE_MUTEX(ghes_list_mutex); * Because the memory area used to transfer hardware error information * from BIOS to Linux can be determined only in NMI, IRQ or timer * handler, but general ioremap can not be used in atomic context, so - * a special version of atomic ioremap is implemented for that. + * the fixmap is used instead. */ /* @@ -126,8 +127,8 @@ static DEFINE_MUTEX(ghes_list_mutex); /* virtual memory area for atomic ioremap */ static struct vm_struct *ghes_ioremap_area; /* - * These 2 spinlock is used to prevent atomic ioremap virtual memory - * area from being mapped simultaneously. + * These 2 spinlocks are used to prevent the fixmap entries from being used + * simultaneously. */ static DEFINE_RAW_SPINLOCK(ghes_ioremap_lock_nmi); static DEFINE_SPINLOCK(ghes_ioremap_lock_irq); @@ -159,53 +160,36 @@ static void ghes_ioremap_exit(void) static void __iomem *ghes_ioremap_pfn_nmi(u64 pfn) { - unsigned long vaddr; phys_addr_t paddr; pgprot_t prot; - vaddr = (unsigned long)GHES_IOREMAP_NMI_PAGE(ghes_ioremap_area->addr); - paddr = pfn << PAGE_SHIFT; prot = arch_apei_get_mem_attribute(paddr); - ioremap_page_range(vaddr, vaddr + PAGE_SIZE, paddr, prot); + __set_fixmap(FIX_APEI_GHES_NMI, paddr, prot); - return (void __iomem *)vaddr; + return (void __iomem *) fix_to_virt(FIX_APEI_GHES_NMI); } static void __iomem *ghes_ioremap_pfn_irq(u64 pfn) { - unsigned long vaddr; phys_addr_t paddr; pgprot_t prot; - vaddr = (unsigned long)GHES_IOREMAP_IRQ_PAGE(ghes_ioremap_area->addr); - paddr = pfn << PAGE_SHIFT; prot = arch_apei_get_mem_attribute(paddr); + __set_fixmap(FIX_APEI_GHES_IRQ, paddr, prot); - ioremap_page_range(vaddr, vaddr + PAGE_SIZE, paddr, prot); - - return (void __iomem *)vaddr; + return (void __iomem *) fix_to_virt(FIX_APEI_GHES_IRQ); } -static void ghes_iounmap_nmi(void __iomem *vaddr_ptr) +static void ghes_iounmap_nmi(void) { - unsigned long vaddr = (unsigned long __force)vaddr_ptr; - void *base = ghes_ioremap_area->addr; - - BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_NMI_PAGE(base)); - unmap_kernel_range_noflush(vaddr, PAGE_SIZE); - arch_apei_flush_tlb_one(vaddr); + clear_fixmap(FIX_APEI_GHES_NMI); } -static void ghes_iounmap_irq(void __iomem *vaddr_ptr) +static void ghes_iounmap_irq(void) { - unsigned long vaddr = (unsigned long __force)vaddr_ptr; - void *base = ghes_ioremap_area->addr; - - BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_IRQ_PAGE(base)); - unmap_kernel_range_noflush(vaddr, PAGE_SIZE); - arch_apei_flush_tlb_one(vaddr); + clear_fixmap(FIX_APEI_GHES_IRQ); } static int ghes_estatus_pool_init(void) @@ -361,10 +345,10 @@ static void ghes_copy_tofrom_phys(void *buffer, u64 paddr, u32 len, paddr += trunk; buffer += trunk; if (in_nmi) { - ghes_iounmap_nmi(vaddr); + ghes_iounmap_nmi(); raw_spin_unlock(&ghes_ioremap_lock_nmi); } else { - ghes_iounmap_irq(vaddr); + ghes_iounmap_irq(); spin_unlock_irqrestore(&ghes_ioremap_lock_irq, flags); } } -- cgit v1.2.1 From 520e18a5080d2c444a03280d99c8a35cb667d321 Mon Sep 17 00:00:00 2001 From: James Morse Date: Mon, 6 Nov 2017 18:44:25 +0000 Subject: ACPI / APEI: Remove ghes_ioremap_area Now that nothing is using the ghes_ioremap_area pages, rip them out. Signed-off-by: James Morse Reviewed-by: Borislav Petkov Tested-by: Tyler Baicar Signed-off-by: Rafael J. Wysocki Cc: All applicable --- drivers/acpi/apei/ghes.c | 39 ++------------------------------------- 1 file changed, 2 insertions(+), 37 deletions(-) diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 572b6c7303ed..f14695e744d0 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -114,19 +114,7 @@ static DEFINE_MUTEX(ghes_list_mutex); * from BIOS to Linux can be determined only in NMI, IRQ or timer * handler, but general ioremap can not be used in atomic context, so * the fixmap is used instead. - */ - -/* - * Two virtual pages are used, one for IRQ/PROCESS context, the other for - * NMI context (optionally). - */ -#define GHES_IOREMAP_PAGES 2 -#define GHES_IOREMAP_IRQ_PAGE(base) (base) -#define GHES_IOREMAP_NMI_PAGE(base) ((base) + PAGE_SIZE) - -/* virtual memory area for atomic ioremap */ -static struct vm_struct *ghes_ioremap_area; -/* + * * These 2 spinlocks are used to prevent the fixmap entries from being used * simultaneously. */ @@ -141,23 +129,6 @@ static atomic_t ghes_estatus_cache_alloced; static int ghes_panic_timeout __read_mostly = 30; -static int ghes_ioremap_init(void) -{ - ghes_ioremap_area = __get_vm_area(PAGE_SIZE * GHES_IOREMAP_PAGES, - VM_IOREMAP, VMALLOC_START, VMALLOC_END); - if (!ghes_ioremap_area) { - pr_err(GHES_PFX "Failed to allocate virtual memory area for atomic ioremap.\n"); - return -ENOMEM; - } - - return 0; -} - -static void ghes_ioremap_exit(void) -{ - free_vm_area(ghes_ioremap_area); -} - static void __iomem *ghes_ioremap_pfn_nmi(u64 pfn) { phys_addr_t paddr; @@ -1247,13 +1218,9 @@ static int __init ghes_init(void) ghes_nmi_init_cxt(); - rc = ghes_ioremap_init(); - if (rc) - goto err; - rc = ghes_estatus_pool_init(); if (rc) - goto err_ioremap_exit; + goto err; rc = ghes_estatus_pool_expand(GHES_ESTATUS_CACHE_AVG_SIZE * GHES_ESTATUS_CACHE_ALLOCED_MAX); @@ -1277,8 +1244,6 @@ static int __init ghes_init(void) return 0; err_pool_exit: ghes_estatus_pool_exit(); -err_ioremap_exit: - ghes_ioremap_exit(); err: return rc; } -- cgit v1.2.1 From 18b4b276b490a8b9f86c512de8a6054c27bb87c2 Mon Sep 17 00:00:00 2001 From: James Morse Date: Mon, 6 Nov 2017 18:44:26 +0000 Subject: arm64: mm: Remove arch_apei_flush_tlb_one() Nothing calls arch_apei_flush_tlb_one() anymore, instead relying on __set_fixmap() to do the invalidation. Remove it. Move the IPI-considered-harmful comment to __set_fixmap(). Signed-off-by: James Morse Acked-by: Will Deacon Tested-by: Tyler Baicar Signed-off-by: Rafael J. Wysocki Cc: All applicable --- arch/arm64/include/asm/acpi.h | 12 ------------ arch/arm64/mm/mmu.c | 4 ++++ 2 files changed, 4 insertions(+), 12 deletions(-) diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 59cca1d6ec54..32f465a80e4e 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -126,18 +126,6 @@ static inline const char *acpi_get_enable_method(int cpu) */ #define acpi_disable_cmcff 1 pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr); - -/* - * Despite its name, this function must still broadcast the TLB - * invalidation in order to ensure other CPUs don't end up with junk - * entries as a result of speculation. Unusually, its also called in - * IRQ context (ghes_iounmap_irq) so if we ever need to use IPIs for - * TLB broadcasting, then we're in trouble here. - */ -static inline void arch_apei_flush_tlb_one(unsigned long addr) -{ - flush_tlb_kernel_range(addr, addr + PAGE_SIZE); -} #endif /* CONFIG_ACPI_APEI */ #ifdef CONFIG_ACPI_NUMA diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index f1eb15e0e864..267d2b79d52d 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -778,6 +778,10 @@ void __init early_fixmap_init(void) } } +/* + * Unusually, this is also called in IRQ context (ghes_iounmap_irq) so if we + * ever need to use IPIs for TLB broadcasting, then we're in trouble here. + */ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) { -- cgit v1.2.1 From 4a75aeacda3c2455954596593d89187df5420d0a Mon Sep 17 00:00:00 2001 From: James Morse Date: Mon, 6 Nov 2017 18:44:27 +0000 Subject: ACPI / APEI: Remove arch_apei_flush_tlb_one() Nothing calls arch_apei_flush_tlb_one() anymore, instead relying on __set_pte_vaddr() to do the invalidation when called from clear_fixmap() Remove arch_apei_flush_tlb_one(). Signed-off-by: James Morse Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki Cc: All applicable --- arch/x86/kernel/acpi/apei.c | 5 ----- include/acpi/apei.h | 1 - 2 files changed, 6 deletions(-) diff --git a/arch/x86/kernel/acpi/apei.c b/arch/x86/kernel/acpi/apei.c index ea3046e0b0cf..bb8d300fecbd 100644 --- a/arch/x86/kernel/acpi/apei.c +++ b/arch/x86/kernel/acpi/apei.c @@ -52,8 +52,3 @@ void arch_apei_report_mem_error(int sev, struct cper_sec_mem_err *mem_err) apei_mce_report_mem_error(sev, mem_err); #endif } - -void arch_apei_flush_tlb_one(unsigned long addr) -{ - __flush_tlb_one(addr); -} diff --git a/include/acpi/apei.h b/include/acpi/apei.h index c46694abea28..82c451698c98 100644 --- a/include/acpi/apei.h +++ b/include/acpi/apei.h @@ -50,7 +50,6 @@ int erst_clear(u64 record_id); int arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr, void *data); void arch_apei_report_mem_error(int sev, struct cper_sec_mem_err *mem_err); -void arch_apei_flush_tlb_one(unsigned long addr); #endif #endif -- cgit v1.2.1 From c0041d40ba6a352e5a5304d656e8a26e2fba1f63 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 Nov 2017 12:42:50 +0100 Subject: APEI / ERST: use 64-bit timestamps 32-bit timestamps are deprecated in the kernel, so we should not use get_seconds(). In this case, the 'struct cper_record_header' structure already contains a 64-bit field, so the only required change is to use the safe ktime_get_real_seconds() interface as a replacement. Signed-off-by: Arnd Bergmann Reviewed-by: Thomas Gleixner Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/erst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 2c462beee551..6742f6c68034 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -1061,7 +1061,7 @@ static int erst_writer(struct pstore_record *record) rcd->hdr.error_severity = CPER_SEV_FATAL; /* timestamp valid. platform_id, partition_id are invalid */ rcd->hdr.validation_bits = CPER_VALID_TIMESTAMP; - rcd->hdr.timestamp = get_seconds(); + rcd->hdr.timestamp = ktime_get_real_seconds(); rcd->hdr.record_length = sizeof(*rcd) + record->size; rcd->hdr.creator_id = CPER_CREATOR_PSTORE; rcd->hdr.notification_type = CPER_NOTIFY_MCE; -- cgit v1.2.1 From 53c5eaabaea9a1b7a96f95ccc486d2ad721d95bb Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Tue, 26 Sep 2017 16:54:03 +0800 Subject: ACPI / EC: Fix regression related to triggering source of EC event handling Originally the Samsung quirks removed by commit 4c237371 can be covered by commit e923e8e7 and ec_freeze_events=Y mode. But commit 9c40f956 changed ec_freeze_events=Y back to N, making this problem re-surface. Actually, if commit e923e8e7 is robust enough, we can freely change ec_freeze_events mode, so this patch fixes the issue by improving commit e923e8e7. Related commits listed in the merged order: Commit: e923e8e79e18fd6be9162f1be6b99a002e9df2cb Subject: ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled Commit: 4c237371f290d1ed3b2071dd43554362137b1cce Subject: ACPI / EC: Remove old CLEAR_ON_RESUME quirk Commit: 9c40f956ce9b331493347d1b3cb7e384f7dc0581 Subject: Revert "ACPI / EC: Enable event freeze mode..." to fix a regression This patch not only fixes the reported post-resume EC event triggering source issue, but also fixes an unreported similar issue related to the driver bind by adding EC event triggering source in ec_install_handlers(). Fixes: e923e8e79e18 (ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled) Fixes: 4c237371f290 (ACPI / EC: Remove old CLEAR_ON_RESUME quirk) Fixes: 9c40f956ce9b (Revert "ACPI / EC: Enable event freeze mode..." to fix a regression) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196833 Signed-off-by: Lv Zheng Reported-by: Alistair Hamilton Tested-by: Alistair Hamilton Cc: 4.11+ # 4.11+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 236b14324780..82b3ce5e937e 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -486,8 +486,11 @@ static inline void __acpi_ec_enable_event(struct acpi_ec *ec) { if (!test_and_set_bit(EC_FLAGS_QUERY_ENABLED, &ec->flags)) ec_log_drv("event unblocked"); - if (!test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) - advance_transaction(ec); + /* + * Unconditionally invoke this once after enabling the event + * handling mechanism to detect the pending events. + */ + advance_transaction(ec); } static inline void __acpi_ec_disable_event(struct acpi_ec *ec) @@ -1456,11 +1459,10 @@ static int ec_install_handlers(struct acpi_ec *ec, bool handle_events) if (test_bit(EC_FLAGS_STARTED, &ec->flags) && ec->reference_count >= 1) acpi_ec_enable_gpe(ec, true); - - /* EC is fully operational, allow queries */ - acpi_ec_enable_event(ec); } } + /* EC is fully operational, allow queries */ + acpi_ec_enable_event(ec); return 0; } -- cgit v1.2.1 From 84d3f6b76447896919c63b28ad71f71238cefcce Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 11 Sep 2017 16:07:06 +0200 Subject: ACPI / button: Delay acpi_lid_initialize_state() until first user space open ACPI _LID methods may depend on OpRegions and do not always handle handlers for those OpRegions not being present properly e.g. : Method (_LID, 0, NotSerialized) // _LID: Lid Status { If ((^^I2C5.PMI1.AVBL == One) && (^^GPO2.AVBL == One)) { Return (^^GPO2.LPOL) /* \_SB_.GPO2.LPOL */ } } Note the missing Return (1) when either of the OpRegions is not available, this causes (in this case) a report of the lid-switch being closed, which causes userspace to do an immediate suspend at boot. This commit delays getting the initial state and thus calling _LID for the first time until userspace opens the /dev/input/event# node. This ensures that all drivers will have had a chance to load and registerer their OpRegions before the first _LID call, fixing this issue. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/button.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index ef1856b15488..c391898b483c 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -390,6 +390,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) { struct acpi_button *button = acpi_driver_data(device); struct input_dev *input; + int users; switch (event) { case ACPI_FIXED_HARDWARE_EVENT: @@ -398,7 +399,11 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) case ACPI_BUTTON_NOTIFY_STATUS: input = button->input; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_update_state(device); + mutex_lock(&button->input->mutex); + users = button->input->users; + mutex_unlock(&button->input->mutex); + if (users) + acpi_lid_update_state(device); } else { int keycode; @@ -442,12 +447,24 @@ static int acpi_button_resume(struct device *dev) struct acpi_button *button = acpi_driver_data(device); button->suspended = false; - if (button->type == ACPI_BUTTON_TYPE_LID) + if (button->type == ACPI_BUTTON_TYPE_LID && button->input->users) acpi_lid_initialize_state(device); return 0; } #endif +static int acpi_lid_input_open(struct input_dev *input) +{ + struct acpi_device *device = input_get_drvdata(input); + struct acpi_button *button = acpi_driver_data(device); + + button->last_state = !!acpi_lid_evaluate_state(device); + button->last_time = ktime_get(); + acpi_lid_initialize_state(device); + + return 0; +} + static int acpi_button_add(struct acpi_device *device) { struct acpi_button *button; @@ -488,8 +505,7 @@ static int acpi_button_add(struct acpi_device *device) strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID); sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID); - button->last_state = !!acpi_lid_evaluate_state(device); - button->last_time = ktime_get(); + input->open = acpi_lid_input_open; } else { printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid); error = -ENODEV; @@ -522,11 +538,11 @@ static int acpi_button_add(struct acpi_device *device) break; } + input_set_drvdata(input, device); error = input_register_device(input); if (error) goto err_remove_fs; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_initialize_state(device); /* * This assumes there's only one lid device, or if there are * more we only care about the last one... -- cgit v1.2.1 From 3e87ead41224fca9dbc3c8646b5cff8168348aba Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 2 Oct 2017 15:40:33 +0100 Subject: ACPI / sysfs: Make function param_set_trace_method_name() static The function param_set_trace_method_name is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'param_set_trace_method_name' was not declared. Should it be static? Signed-off-by: Colin Ian King Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sysfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 0fd57bf33524..bc303df60d5d 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -169,7 +169,8 @@ module_param_cb(debug_level, ¶m_ops_debug_level, &acpi_dbg_level, 0644); static char trace_method_name[1024]; -int param_set_trace_method_name(const char *val, const struct kernel_param *kp) +static int param_set_trace_method_name(const char *val, + const struct kernel_param *kp) { u32 saved_flags = 0; bool is_abs_path = true; -- cgit v1.2.1 From c4b766c2f3fc4d847f16a3735913b7edf3136343 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Wed, 11 Oct 2017 08:54:57 +0000 Subject: mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file Move the MAX_PCC_SUBSPACES definition to acpi/pcc.h file in preparation to add subspace ID support for cppc_acpi driver. Signed-off-by: George Cherian Reviewed-by: Prashanth Prakash Signed-off-by: Rafael J. Wysocki --- drivers/mailbox/pcc.c | 1 - include/acpi/pcc.h | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c index 9b7005e1345e..e5a69679cfa2 100644 --- a/drivers/mailbox/pcc.c +++ b/drivers/mailbox/pcc.c @@ -69,7 +69,6 @@ #include "mailbox.h" -#define MAX_PCC_SUBSPACES 256 #define MBOX_IRQ_NAME "pcc-mbox" static struct mbox_chan *pcc_mbox_channels; diff --git a/include/acpi/pcc.h b/include/acpi/pcc.h index 8caa79c61703..cd6ef45e614e 100644 --- a/include/acpi/pcc.h +++ b/include/acpi/pcc.h @@ -13,6 +13,7 @@ #include #include +#define MAX_PCC_SUBSPACES 256 #ifdef CONFIG_PCC extern struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id); -- cgit v1.2.1 From 85b1407bf6d2f4a1583e9201b8c163703df733cc Mon Sep 17 00:00:00 2001 From: George Cherian Date: Wed, 11 Oct 2017 08:54:58 +0000 Subject: ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs Based on ACPI 6.2 Section 8.4.7.1.9 If the PCC register space is used, all PCC registers, for all processors in the same performance domain (as defined by _PSD), must be defined to be in the same subspace. Based on Section 14.1 of ACPI specification, it is possible to have a maximum of 256 PCC subspace IDs. Add support of multiple PCC subspace ID instead of using a single global pcc_data structure. While at that, fix the time_delta check in send_pcc_cmd() so that last_mpar_reset and mpar_count are initialized properly. Signed-off-by: George Cherian Reviewed-by: Prashanth Prakash Signed-off-by: Rafael J. Wysocki --- drivers/acpi/cppc_acpi.c | 240 +++++++++++++++++++++++++++++------------------ 1 file changed, 151 insertions(+), 89 deletions(-) diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index e5b47f032d9a..21c28433c590 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -48,7 +48,6 @@ struct cppc_pcc_data { struct mbox_chan *pcc_channel; void __iomem *pcc_comm_addr; - int pcc_subspace_idx; bool pcc_channel_acquired; ktime_t deadline; unsigned int pcc_mpar, pcc_mrtt, pcc_nominal; @@ -75,13 +74,16 @@ struct cppc_pcc_data { /* Wait queue for CPUs whose requests were batched */ wait_queue_head_t pcc_write_wait_q; + ktime_t last_cmd_cmpl_time; + ktime_t last_mpar_reset; + int mpar_count; + int refcount; }; -/* Structure to represent the single PCC channel */ -static struct cppc_pcc_data pcc_data = { - .pcc_subspace_idx = -1, - .platform_owns_pcc = true, -}; +/* Array to represent the PCC channel per subspace id */ +static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES]; +/* The cpu_pcc_subspace_idx containsper CPU subspace id */ +static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx); /* * The cpc_desc structure contains the ACPI register details @@ -93,7 +95,8 @@ static struct cppc_pcc_data pcc_data = { static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr); /* pcc mapped address + header size + offset within PCC subspace */ -#define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs)) +#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \ + 0x8 + (offs)) /* Check if a CPC register is in PCC */ #define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \ @@ -188,13 +191,16 @@ static struct kobj_type cppc_ktype = { .default_attrs = cppc_attrs, }; -static int check_pcc_chan(bool chk_err_bit) +static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit) { int ret = -EIO, status = 0; - struct acpi_pcct_shared_memory __iomem *generic_comm_base = pcc_data.pcc_comm_addr; - ktime_t next_deadline = ktime_add(ktime_get(), pcc_data.deadline); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; + struct acpi_pcct_shared_memory __iomem *generic_comm_base = + pcc_ss_data->pcc_comm_addr; + ktime_t next_deadline = ktime_add(ktime_get(), + pcc_ss_data->deadline); - if (!pcc_data.platform_owns_pcc) + if (!pcc_ss_data->platform_owns_pcc) return 0; /* Retry in case the remote processor was too slow to catch up. */ @@ -219,7 +225,7 @@ static int check_pcc_chan(bool chk_err_bit) } if (likely(!ret)) - pcc_data.platform_owns_pcc = false; + pcc_ss_data->platform_owns_pcc = false; else pr_err("PCC check channel failed. Status=%x\n", status); @@ -230,13 +236,12 @@ static int check_pcc_chan(bool chk_err_bit) * This function transfers the ownership of the PCC to the platform * So it must be called while holding write_lock(pcc_lock) */ -static int send_pcc_cmd(u16 cmd) +static int send_pcc_cmd(int pcc_ss_id, u16 cmd) { int ret = -EIO, i; + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; struct acpi_pcct_shared_memory *generic_comm_base = - (struct acpi_pcct_shared_memory *) pcc_data.pcc_comm_addr; - static ktime_t last_cmd_cmpl_time, last_mpar_reset; - static int mpar_count; + (struct acpi_pcct_shared_memory *)pcc_ss_data->pcc_comm_addr; unsigned int time_delta; /* @@ -249,24 +254,25 @@ static int send_pcc_cmd(u16 cmd) * before write completion, so first send a WRITE command to * platform */ - if (pcc_data.pending_pcc_write_cmd) - send_pcc_cmd(CMD_WRITE); + if (pcc_ss_data->pending_pcc_write_cmd) + send_pcc_cmd(pcc_ss_id, CMD_WRITE); - ret = check_pcc_chan(false); + ret = check_pcc_chan(pcc_ss_id, false); if (ret) goto end; } else /* CMD_WRITE */ - pcc_data.pending_pcc_write_cmd = FALSE; + pcc_ss_data->pending_pcc_write_cmd = FALSE; /* * Handle the Minimum Request Turnaround Time(MRTT) * "The minimum amount of time that OSPM must wait after the completion * of a command before issuing the next command, in microseconds" */ - if (pcc_data.pcc_mrtt) { - time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time); - if (pcc_data.pcc_mrtt > time_delta) - udelay(pcc_data.pcc_mrtt - time_delta); + if (pcc_ss_data->pcc_mrtt) { + time_delta = ktime_us_delta(ktime_get(), + pcc_ss_data->last_cmd_cmpl_time); + if (pcc_ss_data->pcc_mrtt > time_delta) + udelay(pcc_ss_data->pcc_mrtt - time_delta); } /* @@ -280,18 +286,19 @@ static int send_pcc_cmd(u16 cmd) * not send the request to the platform after hitting the MPAR limit in * any 60s window */ - if (pcc_data.pcc_mpar) { - if (mpar_count == 0) { - time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset); - if (time_delta < 60 * MSEC_PER_SEC) { + if (pcc_ss_data->pcc_mpar) { + if (pcc_ss_data->mpar_count == 0) { + time_delta = ktime_ms_delta(ktime_get(), + pcc_ss_data->last_mpar_reset); + if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) { pr_debug("PCC cmd not sent due to MPAR limit"); ret = -EIO; goto end; } - last_mpar_reset = ktime_get(); - mpar_count = pcc_data.pcc_mpar; + pcc_ss_data->last_mpar_reset = ktime_get(); + pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar; } - mpar_count--; + pcc_ss_data->mpar_count--; } /* Write to the shared comm region. */ @@ -300,10 +307,10 @@ static int send_pcc_cmd(u16 cmd) /* Flip CMD COMPLETE bit */ writew_relaxed(0, &generic_comm_base->status); - pcc_data.platform_owns_pcc = true; + pcc_ss_data->platform_owns_pcc = true; /* Ring doorbell */ - ret = mbox_send_message(pcc_data.pcc_channel, &cmd); + ret = mbox_send_message(pcc_ss_data->pcc_channel, &cmd); if (ret < 0) { pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n", cmd, ret); @@ -311,15 +318,15 @@ static int send_pcc_cmd(u16 cmd) } /* wait for completion and check for PCC errro bit */ - ret = check_pcc_chan(true); + ret = check_pcc_chan(pcc_ss_id, true); - if (pcc_data.pcc_mrtt) - last_cmd_cmpl_time = ktime_get(); + if (pcc_ss_data->pcc_mrtt) + pcc_ss_data->last_cmd_cmpl_time = ktime_get(); - if (pcc_data.pcc_channel->mbox->txdone_irq) - mbox_chan_txdone(pcc_data.pcc_channel, ret); + if (pcc_ss_data->pcc_channel->mbox->txdone_irq) + mbox_chan_txdone(pcc_ss_data->pcc_channel, ret); else - mbox_client_txdone(pcc_data.pcc_channel, ret); + mbox_client_txdone(pcc_ss_data->pcc_channel, ret); end: if (cmd == CMD_WRITE) { @@ -329,12 +336,12 @@ end: if (!desc) continue; - if (desc->write_cmd_id == pcc_data.pcc_write_cnt) + if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt) desc->write_cmd_status = ret; } } - pcc_data.pcc_write_cnt++; - wake_up_all(&pcc_data.pcc_write_wait_q); + pcc_ss_data->pcc_write_cnt++; + wake_up_all(&pcc_ss_data->pcc_write_wait_q); } return ret; @@ -536,16 +543,16 @@ err_ret: } EXPORT_SYMBOL_GPL(acpi_get_psd_map); -static int register_pcc_channel(int pcc_subspace_idx) +static int register_pcc_channel(int pcc_ss_idx) { struct acpi_pcct_hw_reduced *cppc_ss; u64 usecs_lat; - if (pcc_subspace_idx >= 0) { - pcc_data.pcc_channel = pcc_mbox_request_channel(&cppc_mbox_cl, - pcc_subspace_idx); + if (pcc_ss_idx >= 0) { + pcc_data[pcc_ss_idx]->pcc_channel = + pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx); - if (IS_ERR(pcc_data.pcc_channel)) { + if (IS_ERR(pcc_data[pcc_ss_idx]->pcc_channel)) { pr_err("Failed to find PCC communication channel\n"); return -ENODEV; } @@ -556,7 +563,7 @@ static int register_pcc_channel(int pcc_subspace_idx) * PCC channels) and stored pointers to the * subspace communication region in con_priv. */ - cppc_ss = (pcc_data.pcc_channel)->con_priv; + cppc_ss = (pcc_data[pcc_ss_idx]->pcc_channel)->con_priv; if (!cppc_ss) { pr_err("No PCC subspace found for CPPC\n"); @@ -569,19 +576,20 @@ static int register_pcc_channel(int pcc_subspace_idx) * So add an arbitrary amount of wait on top of Nominal. */ usecs_lat = NUM_RETRIES * cppc_ss->latency; - pcc_data.deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); - pcc_data.pcc_mrtt = cppc_ss->min_turnaround_time; - pcc_data.pcc_mpar = cppc_ss->max_access_rate; - pcc_data.pcc_nominal = cppc_ss->latency; - - pcc_data.pcc_comm_addr = acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length); - if (!pcc_data.pcc_comm_addr) { + pcc_data[pcc_ss_idx]->deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); + pcc_data[pcc_ss_idx]->pcc_mrtt = cppc_ss->min_turnaround_time; + pcc_data[pcc_ss_idx]->pcc_mpar = cppc_ss->max_access_rate; + pcc_data[pcc_ss_idx]->pcc_nominal = cppc_ss->latency; + + pcc_data[pcc_ss_idx]->pcc_comm_addr = + acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length); + if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) { pr_err("Failed to ioremap PCC comm region mem\n"); return -ENOMEM; } /* Set flag so that we dont come here for each CPU. */ - pcc_data.pcc_channel_acquired = true; + pcc_data[pcc_ss_idx]->pcc_channel_acquired = true; } return 0; @@ -600,6 +608,34 @@ bool __weak cpc_ffh_supported(void) return false; } + +/** + * pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace + * + * Check and allocate the cppc_pcc_data memory. + * In some processor configurations it is possible that same subspace + * is shared between multiple CPU's. This is seen especially in CPU's + * with hardware multi-threading support. + * + * Return: 0 for success, errno for failure + */ +int pcc_data_alloc(int pcc_ss_id) +{ + if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES) + return -EINVAL; + + if (pcc_data[pcc_ss_id]) { + pcc_data[pcc_ss_id]->refcount++; + } else { + pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data), + GFP_KERNEL); + if (!pcc_data[pcc_ss_id]) + return -ENOMEM; + pcc_data[pcc_ss_id]->refcount++; + } + + return 0; +} /* * An example CPC table looks like the following. * @@ -661,6 +697,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) struct device *cpu_dev; acpi_handle handle = pr->handle; unsigned int num_ent, i, cpc_rev; + int pcc_subspace_id = -1; acpi_status status; int ret = -EFAULT; @@ -733,9 +770,11 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) * so extract it only once. */ if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { - if (pcc_data.pcc_subspace_idx < 0) - pcc_data.pcc_subspace_idx = gas_t->access_width; - else if (pcc_data.pcc_subspace_idx != gas_t->access_width) { + if (pcc_subspace_id < 0) { + pcc_subspace_id = gas_t->access_width; + if (pcc_data_alloc(pcc_subspace_id)) + goto out_free; + } else if (pcc_subspace_id != gas_t->access_width) { pr_debug("Mismatched PCC ids.\n"); goto out_free; } @@ -763,6 +802,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) goto out_free; } } + per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id; /* Store CPU Logical ID */ cpc_ptr->cpu_id = pr->id; @@ -771,14 +811,14 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) if (ret) goto out_free; - /* Register PCC channel once for all CPUs. */ - if (!pcc_data.pcc_channel_acquired) { - ret = register_pcc_channel(pcc_data.pcc_subspace_idx); + /* Register PCC channel once for all PCC subspace id. */ + if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) { + ret = register_pcc_channel(pcc_subspace_id); if (ret) goto out_free; - init_rwsem(&pcc_data.pcc_lock); - init_waitqueue_head(&pcc_data.pcc_write_wait_q); + init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock); + init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q); } /* Everything looks okay */ @@ -831,6 +871,18 @@ void acpi_cppc_processor_exit(struct acpi_processor *pr) struct cpc_desc *cpc_ptr; unsigned int i; void __iomem *addr; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id); + + if (pcc_ss_id >=0 && pcc_data[pcc_ss_id]) { + if (pcc_data[pcc_ss_id]->pcc_channel_acquired) { + pcc_data[pcc_ss_id]->refcount--; + if (!pcc_data[pcc_ss_id]->refcount) { + pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel); + pcc_data[pcc_ss_id]->pcc_channel_acquired = 0; + kfree(pcc_data[pcc_ss_id]); + } + } + } cpc_ptr = per_cpu(cpc_desc_ptr, pr->id); if (!cpc_ptr) @@ -888,6 +940,7 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val) { int ret_val = 0; void __iomem *vaddr = 0; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); struct cpc_reg *reg = ®_res->cpc_entry.reg; if (reg_res->type == ACPI_TYPE_INTEGER) { @@ -897,7 +950,7 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val) *val = 0; if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) - vaddr = GET_PCC_VADDR(reg->address); + vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) vaddr = reg_res->sys_mem_vaddr; else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) @@ -932,10 +985,11 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val) { int ret_val = 0; void __iomem *vaddr = 0; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); struct cpc_reg *reg = ®_res->cpc_entry.reg; if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) - vaddr = GET_PCC_VADDR(reg->address); + vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) vaddr = reg_res->sys_mem_vaddr; else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) @@ -980,6 +1034,8 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) struct cpc_register_resource *highest_reg, *lowest_reg, *lowest_non_linear_reg, *nominal_reg; u64 high, low, nom, min_nonlinear; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; int ret = 0, regs_in_pcc = 0; if (!cpc_desc) { @@ -996,9 +1052,9 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) || CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg)) { regs_in_pcc = 1; - down_write(&pcc_data.pcc_lock); + down_write(&pcc_ss_data->pcc_lock); /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ) < 0) { + if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -1021,7 +1077,7 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) out_err: if (regs_in_pcc) - up_write(&pcc_data.pcc_lock); + up_write(&pcc_ss_data->pcc_lock); return ret; } EXPORT_SYMBOL_GPL(cppc_get_perf_caps); @@ -1038,6 +1094,8 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum); struct cpc_register_resource *delivered_reg, *reference_reg, *ref_perf_reg, *ctr_wrap_reg; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; u64 delivered, reference, ref_perf, ctr_wrap_time; int ret = 0, regs_in_pcc = 0; @@ -1061,10 +1119,10 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) /* Are any of the regs PCC ?*/ if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) || CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) { - down_write(&pcc_data.pcc_lock); + down_write(&pcc_ss_data->pcc_lock); regs_in_pcc = 1; /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ) < 0) { + if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -1094,7 +1152,7 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) perf_fb_ctrs->wraparound_time = ctr_wrap_time; out_err: if (regs_in_pcc) - up_write(&pcc_data.pcc_lock); + up_write(&pcc_ss_data->pcc_lock); return ret; } EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs); @@ -1110,6 +1168,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) { struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu); struct cpc_register_resource *desired_reg; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; int ret = 0; if (!cpc_desc) { @@ -1127,11 +1187,11 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * achieve that goal here */ if (CPC_IN_PCC(desired_reg)) { - down_read(&pcc_data.pcc_lock); /* BEGIN Phase-I */ - if (pcc_data.platform_owns_pcc) { - ret = check_pcc_chan(false); + down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */ + if (pcc_ss_data->platform_owns_pcc) { + ret = check_pcc_chan(pcc_ss_id, false); if (ret) { - up_read(&pcc_data.pcc_lock); + up_read(&pcc_ss_data->pcc_lock); return ret; } } @@ -1139,8 +1199,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * Update the pending_write to make sure a PCC CMD_READ will not * arrive and steal the channel during the switch to write lock */ - pcc_data.pending_pcc_write_cmd = true; - cpc_desc->write_cmd_id = pcc_data.pcc_write_cnt; + pcc_ss_data->pending_pcc_write_cmd = true; + cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt; cpc_desc->write_cmd_status = 0; } @@ -1151,7 +1211,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) cpc_write(cpu, desired_reg, perf_ctrls->desired_perf); if (CPC_IN_PCC(desired_reg)) - up_read(&pcc_data.pcc_lock); /* END Phase-I */ + up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */ /* * This is Phase-II where we transfer the ownership of PCC to Platform * @@ -1199,15 +1259,15 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * the write command before servicing the read command */ if (CPC_IN_PCC(desired_reg)) { - if (down_write_trylock(&pcc_data.pcc_lock)) { /* BEGIN Phase-II */ + if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */ /* Update only if there are pending write commands */ - if (pcc_data.pending_pcc_write_cmd) - send_pcc_cmd(CMD_WRITE); - up_write(&pcc_data.pcc_lock); /* END Phase-II */ + if (pcc_ss_data->pending_pcc_write_cmd) + send_pcc_cmd(pcc_ss_id, CMD_WRITE); + up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */ } else /* Wait until pcc_write_cnt is updated by send_pcc_cmd */ - wait_event(pcc_data.pcc_write_wait_q, - cpc_desc->write_cmd_id != pcc_data.pcc_write_cnt); + wait_event(pcc_ss_data->pcc_write_wait_q, + cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt); /* send_pcc_cmd updates the status in case of failure */ ret = cpc_desc->write_cmd_status; @@ -1240,6 +1300,8 @@ unsigned int cppc_get_transition_latency(int cpu_num) unsigned int latency_ns = 0; struct cpc_desc *cpc_desc; struct cpc_register_resource *desired_reg; + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num); + struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; cpc_desc = per_cpu(cpc_desc_ptr, cpu_num); if (!cpc_desc) @@ -1249,11 +1311,11 @@ unsigned int cppc_get_transition_latency(int cpu_num) if (!CPC_IN_PCC(desired_reg)) return CPUFREQ_ETERNAL; - if (pcc_data.pcc_mpar) - latency_ns = 60 * (1000 * 1000 * 1000 / pcc_data.pcc_mpar); + if (pcc_ss_data->pcc_mpar) + latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar); - latency_ns = max(latency_ns, pcc_data.pcc_nominal * 1000); - latency_ns = max(latency_ns, pcc_data.pcc_mrtt * 1000); + latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000); + latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000); return latency_ns; } -- cgit v1.2.1 From 71c50dbe1f4e5b964786e3680f4b92df9ccc630b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 15 Oct 2017 12:50:34 +0100 Subject: ACPI / LPSS: Remove redundant initialization of clk The pointer clk is being initialized to ERR_PTR(-ENODEV) however this value is never read before it is set to clk_data->clk. Thus the initialization is redundant and can be mored. Cleans up clang warning: Value stored to 'clk' during its initialization is never read Signed-off-by: Colin Ian King Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_lpss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 032ae44710e5..6633bc8e5846 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -362,7 +362,7 @@ static int register_device_clock(struct acpi_device *adev, { const struct lpss_device_desc *dev_desc = pdata->dev_desc; const char *devname = dev_name(&adev->dev); - struct clk *clk = ERR_PTR(-ENODEV); + struct clk *clk; struct lpss_clk_data *clk_data; const char *parent, *clk_name; void __iomem *prv_base; -- cgit v1.2.1 From 1be9c3a0a03330c8e61db30d442b31522092c291 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 12 Oct 2017 13:49:18 -0500 Subject: ACPI: Mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ac.c | 1 + drivers/acpi/acpi_processor.c | 1 + drivers/acpi/dock.c | 1 + drivers/acpi/resource.c | 1 + 4 files changed, 4 insertions(+) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 8f52483219ba..47a7ed557bd6 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -265,6 +265,7 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); + /* fall through */ case ACPI_AC_NOTIFY_STATUS: case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 86c10599d9f8..449d86d39965 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -82,6 +82,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev) * PIIX4 models. */ errata.piix4.throttle = 1; + /* fall through*/ case 2: /* PIIX4E */ case 3: /* PIIX4M */ diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 2305e1ab978e..e3fc1f045e1c 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -482,6 +482,7 @@ int dock_notify(struct acpi_device *adev, u32 event) surprise_removal = 1; event = ACPI_NOTIFY_EJECT_REQUEST; /* Fall back */ + /* fall through */ case ACPI_NOTIFY_EJECT_REQUEST: begin_undock(ds); if ((immediate_undock && !(ds->flags & DOCK_IS_ATA)) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index d85e010ee2cc..316a0fc785e3 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -381,6 +381,7 @@ unsigned int acpi_dev_get_irq_type(int triggering, int polarity) case ACPI_ACTIVE_BOTH: if (triggering == ACPI_EDGE_SENSITIVE) return IRQ_TYPE_EDGE_BOTH; + /* fall through */ default: return IRQ_TYPE_NONE; } -- cgit v1.2.1