summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/bpf
Commit message (Collapse)AuthorAgeFilesLines
* selftests: bpf: config: enable NET_SCH_INGRESS for xdp_meta.shAnders Roxell2018-05-181-0/+2
| | | | | | | | | | | | | | When running bpf's selftest test_xdp_meta.sh it fails: ./test_xdp_meta.sh Error: Specified qdisc not found. selftests: test_xdp_meta [FAILED] Need to enable CONFIG_NET_SCH_INGRESS and CONFIG_NET_CLS_ACT to get the test to pass. Fixes: 22c8852624fc ("bpf: improve selftests and add tests for meta pointer") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests/bpf: check return value of fopen in test_verifier.cJesper Dangaard Brouer2018-05-171-0/+5
| | | | | | | | | | | | | | | | | | Commit 0a6748740368 ("selftests/bpf: Only run tests if !bpf_disabled") forgot to check return value of fopen. This caused some confusion, when running test_verifier (from tools/testing/selftests/bpf/) on an older kernel (< v4.4) as it will simply seqfault. This fix avoids the segfault and prints an error, but allow program to continue. Given the sysctl was introduced in 1be7f75d1668 ("bpf: enable non-root eBPF programs"), we know that the running kernel cannot support unpriv, thus continue with unpriv_disabled = true. Fixes: 0a6748740368 ("selftests/bpf: Only run tests if !bpf_disabled") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: minor fix to selftest test_stacktrace_build_id()Song Liu2018-05-021-2/+2
| | | | | | | | | | | 1. remove useless parameter list to ./urandom_read 2. add missing "\n" to the end of an error message Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* tools/bpf: fix test_sock and test_sock_addr.sh failureYonghong Song2018-04-193-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bpf selftests test_sock and test_sock_addr.sh failed in my test machine. The failure looks like: $ ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL] Test case: sock_create load w/ expected_attach_type .. [FAIL] Test case: attach type mismatch bind4 vs bind6 .. [FAIL] ... Summary: 4 PASSED, 12 FAILED $ ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ..... ERROR: Timeout waiting for test IP to become available. In test_sock, bpf program loads failed due to hitting memlock limits. In test_sock_addr.sh, my test machine is a ipv6 only test box and using "ping" without specifying address family for an ipv6 address does not work. This patch fixed the issue by including header bpf_rlimit.h in test_sock.c and test_sock_addr.c, and specifying address family for ping command. Cc: Andrey Ignatov <rdna@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests: bpf: update .gitignore with missing generated filesAnders Roxell2018-04-111-0/+3
| | | | | Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests/bpf: Selftest for sys_bind post-hooks.Andrey Ignatov2018-03-312-1/+482
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add selftest for attach types `BPF_CGROUP_INET4_POST_BIND` and `BPF_CGROUP_INET6_POST_BIND`. The main things tested are: * prog load behaves as expected (valid/invalid accesses in prog); * prog attach behaves as expected (load- vs attach-time attach types); * `BPF_CGROUP_INET_SOCK_CREATE` can be attached in a backward compatible way; * post-hooks return expected result and errno. Example: # ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [PASS] Test case: sock_create load w/ expected_attach_type .. [PASS] Test case: attach type mismatch bind4 vs bind6 .. [PASS] Test case: attach type mismatch bind6 vs bind4 .. [PASS] Test case: attach type mismatch default vs bind4 .. [PASS] Test case: attach type mismatch bind6 vs sock_create .. [PASS] Test case: bind4 reject all .. [PASS] Test case: bind6 reject all .. [PASS] Test case: bind6 deny specific IP & port .. [PASS] Test case: bind4 allow specific IP & port .. [PASS] Test case: bind4 allow all .. [PASS] Test case: bind6 allow all .. [PASS] Summary: 16 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests/bpf: Selftest for sys_connect hooksAndrey Ignatov2018-03-316-3/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT attach types. Try to connect(2) to specified IP:port and test that: * remote IP:port pair is overridden; * local end of connection is bound to specified IP. All combinations of IPv4/IPv6 and TCP/UDP are tested. Example: # tcpdump -pn -i lo -w connect.pcap 2>/dev/null & [1] 478 # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ... OK Load bind4 with invalid type (can pollute stderr) ... REJECTED Load bind4 with valid type ... OK Attach bind4 with invalid type ... REJECTED Attach bind4 with valid type ... OK Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r2 = 23569 1: (63) *(u32 *)(r1 +24) = r2 2: (b7) r2 = 16777343 3: (63) *(u32 *)(r1 +4) = r2 invalid bpf_context access off=4 size=4 [ 1518.404609] random: crng init done libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect4' libbpf: failed to load object './connect4_prog.o' ... REJECTED Load connect4 with valid type ... OK Attach connect4 with invalid type ... REJECTED Attach connect4 with valid type ... OK Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447) Load bind6 with invalid type (can pollute stderr) ... REJECTED Load bind6 with valid type ... OK Attach bind6 with invalid type ... REJECTED Attach bind6 with valid type ... OK Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r6 = 0 1: (63) *(u32 *)(r1 +12) = r6 invalid bpf_context access off=12 size=4 libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect6' libbpf: failed to load object './connect6_prog.o' ... REJECTED Load connect6 with valid type ... OK Attach connect6 with invalid type ... REJECTED Attach connect6 with valid type ... OK Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 37458) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 39315) ### SUCCESS # egrep 'connect\(.*AF_INET' connect.trace | \ > egrep -vw 'htons\(1025\)' | fold -b -s -w 72 502 connect(7, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(8, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(9, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 502 connect(10, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 # fg tcpdump -pn -i lo -w connect.pcap 2> /dev/null # tcpdump -r connect.pcap -n tcp | cut -c 1-72 reading from file connect.pcap, link-type EN10MB (Ethernet) 17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333 17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112 17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w 17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1, 17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win 17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac 17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt 17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests/bpf: Selftest for sys_bind hooksAndrey Ignatov2018-03-312-1/+488
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add selftest to work with bpf_sock_addr context from `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs. Try to bind(2) on IP:port and apply: * loads to make sure context can be read correctly, including narrow loads (byte, half) for IP and full-size loads (word) for all fields; * stores to those fields allowed by verifier. All combination from IPv4/IPv6 and TCP/UDP are tested. Both scenarios are tested: * valid programs can be loaded and attached; * invalid programs can be neither loaded nor attached. Test passes when expected data can be read from context in the BPF-program, and after the call to bind(2) socket is bound to IP:port pair that was written by BPF-program to the context. Example: # ./test_sock_addr Attached bind4 program. Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Attached bind6 program. Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) ### SUCCESS Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests/bpf: test for bpf_get_stackid() from raw tracepointsAlexei Starovoitov2018-03-281-21/+70
| | | | | | | | | similar to traditional traceopint test add bpf_get_stackid() test from raw tracepoints and reduce verbosity of existing stackmap test Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: sockmap sample test for bpf_msg_pull_dataJohn Fastabend2018-03-191-0/+2
| | | | | | | | | | | | | | | | This adds an option to test the msg_pull_data helper. This uses two options txmsg_start and txmsg_end to let the user specify start and end bytes to pull. The options can be used with txmsg_apply, txmsg_cork options as well as with any of the basic tests, txmsg, txmsg_redir and txmsg_drop (plus noisy variants) to run pull_data inline with those tests. By giving user direct control over the variables we can easily do negative testing as well as positive tests. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: sockmap sample support for bpf_msg_cork_bytes()John Fastabend2018-03-191-0/+2
| | | | | | | | | | | | | | Add sample application support for the bpf_msg_cork_bytes helper. This lets the user specify how many bytes each verdict should apply to. Similar to apply_bytes() tests these can be run as a stand-alone test when used without other options or inline with other tests by using the txmsg_cork option along with any of the basic tests txmsg, txmsg_redir, txmsg_drop. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: sockmap, add sample option to test apply_bytes helperJohn Fastabend2018-03-191-1/+2
| | | | | | | | | | | | | | | | | | This adds an option to test the apply_bytes helper. This option lets the user specify an int on the command line specifying how much data each verdict should apply to. When this is set a map entry is set with the bytes input by the user and then the specified program --txmsg or --txmsg_redir will use the value and set the applied data. If no other option is set then a default --txmsg_apply program is run. This program will drop pkts if an error is detected on the bytes map lookup. Useful to verify the map lookup and apply helper are working and causing a hard error if it is not. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: sockmap sample, add option to attach SK_MSG programJohn Fastabend2018-03-191-0/+3
| | | | | | | | Add sockmap option to use SK_MSG program types. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: add verifier tests for BPF_PROG_TYPE_SK_MSGJohn Fastabend2018-03-191-0/+54
| | | | | | | | Test read and writes for BPF_PROG_TYPE_SK_MSG. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: add map tests for BPF_PROG_TYPE_SK_MSGJohn Fastabend2018-03-196-7/+108
| | | | | | | | Add map tests to attach BPF_PROG_TYPE_SK_MSG types to a sockmap. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: add selftest for stackmap with BPF_F_STACK_BUILD_IDSong Liu2018-03-154-2/+256
| | | | | | | | | | | | | test_stacktrace_build_id() is added. It accesses tracepoint urandom_read with "dd" and "urandom_read" and gathers stack traces. Then it reads the stack traces from the stackmap. urandom_read is a statically link binary that reads from /dev/urandom. test_stacktrace_build_id() calls readelf to read build ID of urandom_read and compares it with build ID from the stackmap. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-03-061-1/+58
|\ | | | | | | | | | | | | | | | | | | All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
| * bpf: allow xadd only on aligned memoryDaniel Borkmann2018-02-231-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The requirements around atomic_add() / atomic64_add() resp. their JIT implementations differ across architectures. E.g. while x86_64 seems just fine with BPF's xadd on unaligned memory, on arm64 it triggers via interpreter but also JIT the following crash: [ 830.864985] Unable to handle kernel paging request at virtual address ffff8097d7ed6703 [...] [ 830.916161] Internal error: Oops: 96000021 [#1] SMP [ 830.984755] CPU: 37 PID: 2788 Comm: test_verifier Not tainted 4.16.0-rc2+ #8 [ 830.991790] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.29 07/17/2017 [ 830.998998] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 831.003793] pc : __ll_sc_atomic_add+0x4/0x18 [ 831.008055] lr : ___bpf_prog_run+0x1198/0x1588 [ 831.012485] sp : ffff00001ccabc20 [ 831.015786] x29: ffff00001ccabc20 x28: ffff8017d56a0f00 [ 831.021087] x27: 0000000000000001 x26: 0000000000000000 [ 831.026387] x25: 000000c168d9db98 x24: 0000000000000000 [ 831.031686] x23: ffff000008203878 x22: ffff000009488000 [ 831.036986] x21: ffff000008b14e28 x20: ffff00001ccabcb0 [ 831.042286] x19: ffff0000097b5080 x18: 0000000000000a03 [ 831.047585] x17: 0000000000000000 x16: 0000000000000000 [ 831.052885] x15: 0000ffffaeca8000 x14: 0000000000000000 [ 831.058184] x13: 0000000000000000 x12: 0000000000000000 [ 831.063484] x11: 0000000000000001 x10: 0000000000000000 [ 831.068783] x9 : 0000000000000000 x8 : 0000000000000000 [ 831.074083] x7 : 0000000000000000 x6 : 000580d428000000 [ 831.079383] x5 : 0000000000000018 x4 : 0000000000000000 [ 831.084682] x3 : ffff00001ccabcb0 x2 : 0000000000000001 [ 831.089982] x1 : ffff8097d7ed6703 x0 : 0000000000000001 [ 831.095282] Process test_verifier (pid: 2788, stack limit = 0x0000000018370044) [ 831.102577] Call trace: [ 831.105012] __ll_sc_atomic_add+0x4/0x18 [ 831.108923] __bpf_prog_run32+0x4c/0x70 [ 831.112748] bpf_test_run+0x78/0xf8 [ 831.116224] bpf_prog_test_run_xdp+0xb4/0x120 [ 831.120567] SyS_bpf+0x77c/0x1110 [ 831.123873] el0_svc_naked+0x30/0x34 [ 831.127437] Code: 97fffe97 17ffffec 00000000 f9800031 (885f7c31) Reason for this is because memory is required to be aligned. In case of BPF, we always enforce alignment in terms of stack access, but not when accessing map values or packet data when the underlying arch (e.g. arm64) has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set. xadd on packet data that is local to us anyway is just wrong, so forbid this case entirely. The only place where xadd makes sense in fact are map values; xadd on stack is wrong as well, but it's been around for much longer. Specifically enforce strict alignment in case of xadd, so that we handle this case generically and avoid such crashes in the first place. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | bpf: add tail call tests to test_verifierDaniel Borkmann2018-02-261-7/+110
| | | | | | | | | | | | | | | | | | | | | | | | One of the downsides of the test_bpf module was that since being in kernel space, it couldn't test-run tail calls. Now that the test_verifier has the ability to perform run-time tests, populate the prog array so we actually jump into other BPF programs and can check all corner cases. Most useful in combination with JITs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | bpf: unify rlimit handling in selftestsDaniel Borkmann2018-02-2611-54/+44
| | | | | | | | | | | | | | | | | | Unify memlock handling into bpf_rlimit.h and replace all occurences in BPF kselftests with it. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2018-02-263-6/+132
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2018-02-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various improvements for BPF kselftests: i) skip unprivileged tests when kernel.unprivileged_bpf_disabled sysctl knob is set, ii) count the number of skipped tests from unprivileged, iii) when a test case had an unexpected error then print the actual but also the unexpected one for better comparison, from Joe. 2) Add a sample program for collecting CPU state statistics with regards to how long the CPU resides in cstate and pstate levels. Based on cpu_idle and cpu_frequency trace points, from Leo. 3) Various x64 BPF JIT optimizations to further shrink the generated image size in order to make it more icache friendly. When tested on the Cilium generated programs, image size reduced by approx 4-5% in best case mainly due to how LLVM emits unsigned 32 bit constants, from Daniel. 4) Improvements and fixes on the BPF sockmap sample programs: i) fix the sockmap's Makefile to include nlattr.o for libbpf, ii) detach the sock ops programs from the cgroup before exit, from Prashant. 5) Avoid including xdp.h in filter.h by just forward declaring the struct xdp_rxq_info in filter.h, from Jesper. 6) Fix the BPF kselftests Makefile for cgroup_helpers.c by only declaring it a dependency for test_dev_cgroup.c but not every other test case where it is not needed, from Jesper. 7) Adjust rlimit RLIMIT_MEMLOCK for test_tcpbpf_user selftest since the default is insufficient for creating the 'global_map' used in the corresponding BPF program, from Yonghong. 8) Likewise, for the xdp_redirect sample, Tushar ran into the same when invoking xdp_redirect and xdp_monitor at the same time, therefore in order to have the sample generically work bump the limit here, too. Fix from Tushar. 9) Avoid an unnecessary NULL check in BPF_CGROUP_RUN_PROG_INET_SOCK() since sk is always guaranteed to be non-NULL, from Yafang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * bpf: add various jit test casesDaniel Borkmann2018-02-231-0/+89
| | | | | | | | | | | | | | Add few test cases that check the rnu-time results under JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * selftests/bpf: Only run tests if !bpf_disabledJoe Stringer2018-02-151-1/+25
| | | | | | | | | | | | | | | | | | | | The "kernel.unprivileged_bpf_disabled" sysctl, if enabled, causes all unprivileged tests to fail because it permanently disables unprivileged BPF access for the currently running kernel. Skip the relevant tests if the user attempts to run the testsuite with this sysctl enabled. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * selftests/bpf: Count tests skipped by unprivJoe Stringer2018-02-151-3/+7
| | | | | | | | | | | | | | | | When priviliged tests are skipped due to user rights, count the number of skipped tests so it's more obvious that the test did not check everything. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * selftests/bpf: Print unexpected output on failJoe Stringer2018-02-151-1/+2
| | | | | | | | | | | | | | | | This makes it easier to debug off-hand when the error message isn't exactly as expected. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * tools/bpf: adjust rlimit RLIMIT_MEMLOCK for test_tcpbpf_userYonghong Song2018-02-131-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default rlimit RLIMIT_MEMLOCK is 64KB. In certain cases, e.g. in a test machine mimicking our production system, this test may fail due to unable to charge the required memory for map creation: # ./test_tcpbpf_user libbpf: failed to create map (name: 'global_map'): Operation not permitted libbpf: failed to load object 'test_tcpbpf_kern.o' FAILED: load_bpf_file failed for: test_tcpbpf_kern.o Changing the default rlimit RLIMIT_MEMLOCK to unlimited makes the test always pass. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * selftests/bpf: fix Makefile for cgroup_helpers.cJesper Dangaard Brouer2018-02-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current selftests Makefile construct result in cgroup_helpers.c gets compiled together with all the TEST_GEN_PROGS. And it also result in invoking the libbpf Makefile two times (tools/lib/bpf). These issues were introduced in commit 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/"). The only test program that requires the cgroup helpers is 'test_dev_cgroup'. Thus, create a make target $(OUTPUT)/test_dev_cgroup that extend[1] the 'prerequisite' for the 'stem' %-style pattern in ../lib.mk, for this particular test program. Reviewers notice the make-rules in tools/testing/selftests/lib.mk differ from the normal kernel kbuild rules, and it is practical to use 'make -p' to follow how these 'Implicit/static pattern stem' gets expanded. [1] https://www.gnu.org/software/make/manual/html_node/Static-Usage.html Fixes: 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | bpf, arm64: fix out of bounds access in tail callDaniel Borkmann2018-02-221-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccdd8cc0 ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | selftests/bpf/test_maps: exit child process without error in ENOMEM caseLi Zhijian2018-02-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | test_maps contains a series of stress tests, and previously it will break the rest tests when it failed to alloc memory. ----------------------- Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=16 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' test_maps: test_maps.c:955: run_parallel: Assertion `status == 0' failed. Aborted not ok 1..3 selftests: test_maps [FAIL] ----------------------- after this patch, the rest tests will be continue when it occurs an ENOMEM failure CC: Alexei Starovoitov <alexei.starovoitov@gmail.com> CC: Philip Li <philip.li@intel.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | selftests/bpf: update gitignore with test_libbpf_openAnders Roxell2018-02-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | bpf builds a test program for loading BPF ELF files. Add the executable to the .gitignore list. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | selftests/bpf: tcpbpf_kern: use in6_* macros from glibcAnders Roxell2018-02-221-1/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both glibc and the kernel have in6_* macros definitions. Build fails because it picks up wrong in6_* macro from the kernel header and not the header from glibc. Fixes build error below: clang -I. -I./include/uapi -I../../../include/uapi -Wno-compare-distinct-pointer-types \ -O2 -target bpf -emit-llvm -c test_tcpbpf_kern.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o .../tools/testing/selftests/bpf/test_tcpbpf_kern.o In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:101:5: error: expected identifier IPPROTO_HOPOPTS = 0, /* IPv6 Hop-by-Hop options. */ ^ .../linux/in6.h:131:26: note: expanded from macro 'IPPROTO_HOPOPTS' ^ In file included from test_tcpbpf_kern.c:12: /usr/include/netinet/in.h:103:5: error: expected identifier IPPROTO_ROUTING = 43, /* IPv6 routing header. */ ^ .../linux/in6.h:132:26: note: expanded from macro 'IPPROTO_ROUTING' ^ In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:105:5: error: expected identifier IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header. */ ^ Since both glibc and the kernel have in6_* macros definitions, use the one from glibc. Kernel headers will check for previous libc definitions by including include/linux/libc-compat.h. Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests/bpf: add selftest that use test_libbpf_openJesper Dangaard Brouer2018-02-092-2/+61
| | | | | | | | | | | | | | | | This script test_libbpf.sh will be part of the 'make run_tests' invocation, but can also be invoked manually in this directory, and a verbose mode can be enabled via setting the environment variable $VERBOSE like: $ VERBOSE=yes ./test_libbpf.sh The script contains some tests that are commented out, as they currently fail. They are reminders about what we need to improve for the libbpf loader library. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests/bpf: add test program for loading BPF ELF filesJesper Dangaard Brouer2018-02-092-1/+151
| | | | | | | | | | | | | | | | | | | | V2: Moved program into selftests/bpf from tools/libbpf This program can be used on its own for testing/debugging if a BPF ELF-object file can be loaded with libbpf (from tools/lib/bpf). If something is wrong with the ELF object, the program have a --debug mode that will display the ELF sections and especially the skipped sections. This allows for quickly identifying the problematic ELF section number, which can be corrolated with the readelf tool. The program signal error via return codes, and also have a --quiet mode, which is practical for use in scripts like selftests/bpf. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* selftests: bpf: test_kmod.sh: check the module path before insmodNaresh Kamboju2018-02-081-3/+15
| | | | | | | | | | | | | | | test_kmod.sh reported false failure when module not present. Check test_bpf.ko is present in the path before loading it. Two cases to be addressed here, In the development process of test_bpf.c unit testing will be done by developers by using "insmod $SRC_TREE/lib/test_bpf.ko" On the other hand testers run full tests by installing modules on device under test (DUT) and followed by modprobe to insert the modules accordingly. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* tools/bpf: fix batch-mode test failure of test_xdp_redirect.shYonghong Song2018-02-062-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tests at tools/testing/selftests/bpf can run in patch mode, e.g., make -C tools/testing/selftests/bpf run_tests With the batch mode, I experimented intermittent test failure of test_xdp_redirect.sh. .... selftests: test_xdp_redirect [PASS] selftests: test_xdp_redirect.sh [PASS] RTNETLINK answers: File exists selftests: test_xdp_meta [FAILED] selftests: test_xdp_meta.sh [FAIL] .... The following illustrates what caused the failure: (1). test_xdp_redirect creates veth pairs (veth1,veth11) and (veth2,veth22), and assign veth11 and veth22 to namespace ns1 and ns2 respectively. (2). at the end of test_xdp_redirect test, ns1 and ns2 are deleted. During this process, the deletion of actual namespace resources, including deletion of veth1{1} and veth2{2}, is put into a workqueue to be processed asynchronously. (3). test_xdp_meta tries to create veth pair (veth1, veth2). The previous veth deletions in step (2) have not finished yet, and veth1 or veth2 may be still valid in the kernel, thus causing the failure. The fix is to explicitly delete the veth pair before test_xdp_redirect exits. Only one end of veth needs deletion as the kernel will delete the other end automatically. Also test_xdp_meta is also fixed in similar manner to avoid future potential issues. Fixes: 996139e801fd ("selftests: bpf: add a test for XDP redirect") Fixes: 22c8852624fc ("bpf: improve selftests and add tests for meta pointer") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf: fix null pointer deref in bpf_prog_test_run_xdpDaniel Borkmann2018-02-011-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | syzkaller was able to generate the following XDP program ... (18) r0 = 0x0 (61) r5 = *(u32 *)(r1 +12) (04) (u32) r0 += (u32) 0 (95) exit ... and trigger a NULL pointer dereference in ___bpf_prog_run() via bpf_prog_test_run_xdp() where this was attempted to run. Reason is that recent xdp_rxq_info addition to XDP programs updated all drivers, but not bpf_prog_test_run_xdp(), where xdp_buff is set up. Thus when context rewriter does the deref on the netdev it's NULL at runtime. Fix it by using xdp_rxq from loopback dev. __netif_get_rx_queue() helper can also be reused in various other locations later on. Fixes: 02dd3291b2f0 ("bpf: finally expose xdp_rxq_info to XDP bpf-programs") Reported-by: syzbot+1eb094057b338eb1fc00@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* tools/bpf: permit selftests/bpf to be built in a different directoryYonghong Song2018-02-012-2/+3
| | | | | | | | | | | | | | Fix a couple of issues at tools/testing/selftests/bpf/Makefile so the following command make -C tools/testing/selftests/bpf OUTPUT=/home/yhs/tmp can put the built results into a different directory. Also add the built binary test_tcpbpf_user in the .gitignore file. Fixes: 6882804c916b ("selftests/bpf: add a test for overlapping packet range checks") Fixes: 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2018-01-2812-34/+868
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) A number of extensions to tcp-bpf, from Lawrence. - direct R or R/W access to many tcp_sock fields via bpf_sock_ops - passing up to 3 arguments to bpf_sock_ops functions - tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks - optionally calling bpf_sock_ops program when RTO fires - optionally calling bpf_sock_ops program when packet is retransmitted - optionally calling bpf_sock_ops program when TCP state changes - access to tclass and sk_txhash - new selftest 2) div/mod exception handling, from Daniel. One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. After considering _four_ different ways to address the problem, we adapt the same behavior as on some major archs like ARMv8: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary. 3) sockmap sample refactoring, from John. 4) lpm map get_next_key fixes, from Yonghong. 5) test cleanups, from Alexei and Prashant. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * tools/bpf: add a multithreaded stress test in bpf selftests test_lpm_mapYonghong Song2018-01-262-1/+96
| | | | | | | | | | | | | | | | | | The new test will spawn four threads, doing map update, delete, lookup and get_next_key in parallel. It is able to reproduce the issue in the previous commit found by syzbot and Eric Dumazet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * bpf: add further test cases around div/mod and othersDaniel Borkmann2018-01-261-13/+330
| | | | | | | | | | | | | | | | | | Update selftests to relfect recent changes and add various new test cases. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * bpf: clean up from test_tcpbpf_kern.cLawrence Brakmo2018-01-261-3/+0
| | | | | | | | | | | | | | | | Removed commented lines from test_tcpbpf_kern.c Fixes: d6d4f60c3a09 bpf: add selftest for tcpbpf Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * bpf: add selftest for tcpbpfLawrence Brakmo2018-01-257-2/+398
| | | | | | | | | | | | | | | | | | | | | | | | | | Added a selftest for tcpbpf (sock_ops) that checks that the appropriate callbacks occured and that it can access tcp_sock fields and that their values are correct. Run with command: ./test_tcpbpf_user Adding the flag "-d" will show why it did not pass. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * selftests/bpf: make 'dubious pointer arithmetic' test usefulAlexei Starovoitov2018-01-241-7/+23
| | | | | | | | | | | | | | | | | | | | | | mostly revert the previous workaround and make 'dubious pointer arithmetic' test useful again. Use (ptr - ptr) << const instead of ptr << const to generate large scalar. The rest stays as before commit 2b36047e7889. Fixes: 2b36047e7889 ("selftests/bpf: fix test_align") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * bpf: test_maps: cleanup sockmaps when test endsPrashant Bhole2018-01-231-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug: BPF programs and maps related to sockmaps test exist in memory even after test_maps ends. This patch fixes it as a short term workaround (sockmap kernel side needs real fixing) by empyting sockmaps when test ends. Fixes: 6f6d33f3b3d0f ("bpf: selftests add sockmap tests") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> [ daniel: Note on workaround. ] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * selftests/bpf: fix test_dev_cgroupAlexei Starovoitov2018-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test incorrectly doing mkdir /mnt/cgroup-test-work-dirtest-bpf-based-device-cgroup instead of mkdir /mnt/cgroup-test-work-dir/test-bpf-based-device-cgroup somehow such mkdir succeeds and new directory appears: /mnt/cgroup-test-work-dir/cgroup-test-work-dirtest-bpf-based-device-cgroup Later cleanup via nftw("/mnt/cgroup-test-work-dir", ...); doesn't walk this directory. "rmdir /mnt/cgroup-test-work-dir" succeeds, but bpf program and dangling cgroup stays in memory. That's a separate issue on a cgroup side. For now fix the test. Fixes: 37f1ba0909df ("selftests/bpf: add a test for device cgroup controller") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * selftests/bpf: speedup test_mapsAlexei Starovoitov2018-01-231-6/+10
| | | | | | | | | | | | | | | | | | | | test_hashmap_walk takes very long time on debug kernel with kasan on. Reduce the number of iterations in this test without sacrificing test coverage. Also add printfs as progress indicator. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * tools/bpf: fix a test failure in selftests prog test_verifierYonghong Song2018-01-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 111e6b45315c ("selftests/bpf: make test_verifier run most programs") enables tools/testing/selftests/bpf/test_verifier unit cases to run via bpf_prog_test_run command. With the latest code base, test_verifier had one test case failure: ... #473/p check deducing bounds from const, 2 FAIL retval 1 != 0 0: (b7) r0 = 1 1: (75) if r0 s>= 0x1 goto pc+1 R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 2: (95) exit from 1 to 3: R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 3: (d5) if r0 s<= 0x1 goto pc+1 R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 4: (95) exit from 3 to 5: R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 5: (1f) r1 -= r0 6: (95) exit processed 7 insns (limit 131072), stack depth 0 ... The test case does not set return value in the test structure and hence the return value from the prog run is assumed to be 0. However, the actual return value is 1. As a result, the test failed. The fix is to correctly set the return value in the test structure. Fixes: 111e6b45315c ("selftests/bpf: make test_verifier run most programs") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | selftests/bpf: check for chain-non-0 extack messageJakub Kicinski2018-01-251-3/+13
| | | | | | | | | | | | | | | | Make sure netdevsim doesn't allow offload of chains other than 0, and that it reports the expected extack message. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests/bpf: check for spurious extacks from the driverJakub Kicinski2018-01-251-0/+27
| | | | | | | | | | | | | | | | | | | | | | Drivers should not report errors when offload is not forced. Check stdout and stderr for familiar messages when with no skip flags and with skip_hw. Check for add, replace, and destroy. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests/bpf: validate replace of TC filters is workingJakub Kicinski2018-01-231-5/+50
| | | | | | | | | | | | | | | | | | Daniel discovered recently I broke TC filter replace (and fixed it in commit ad9294dbc227 ("bpf: fix cls_bpf on filter replace")). Add a test to make sure it never happens again. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud