summaryrefslogtreecommitdiffstats
path: root/sound
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: mpu401: clean up interrupt specificationClemens Ladisch2011-09-1436-76/+78
| | | | | | | | | | | | | | | | | | | | | | | The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: keywest: Remove obsolete cleanup for clientdataAxel Lin2011-09-121-1/+0
| | | | | | | | | | The i2c core will clear the clientdata pointer automatically. We don't have to set the `data' field to NULL in remove() or if probe() failed anymore. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: aoa: Remove obsolete cleanup for clientdataAxel Lin2011-09-121-3/+1
| | | | | | | | | | | | The i2c core will clear the clientdata pointer automatically. We don't have to set the `data' field to NULL in remove() or if probe() failed anymore. Also remove a unneeded NULL checking for kfree. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ymfpci: add "Playback" to FM Legacy Volume controlRaymond Yau2011-09-121-1/+1
| | | | | | | | YDSXGR_LEGACYOUTVOL is a Playback Volume control for OPL3 FM Synth. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb: refine delay information with USB frame counterPierre-Louis Bossart2011-09-124-3/+60
| | | | | | | | | | | | | | | | | | | | | | | | | Existing code only updates the audio delay when URBs were submitted/retired. This can introduce an uncertainty of 8ms on the number of samples played out with the default settings, and a lot more when URBs convey more packets to reduce the interrupt rate and power consumption. This patch relies on the USB frame counter to reduce the uncertainty to less than 2ms worst-case. The delay information essentially becomes independent of the URB size and number of packets. This should help applications like PulseAudio which require accurate audio timing. Clemens Ladisch reported a decrease of mplayer's A-V difference from nrpacks down to at most 1ms. Thanks to Clemens for also pointing out that the implementation of frame counters varies between different HCDs. Only the 8 lowest-bits are used to estimate the delay. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> [clemens: changed debug code] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: add Starr Labs USB MIDI supportKristian Amlie2011-08-264-0/+40
| | | | | | | | | | | | Add support for Starr Labs USB MIDI devices such as the Z7S, which are based on an FTDI serial UART chip. Based on a patch by Daniel Mack. Signed-off-by: Kristian Amlie <kristian@amlie.name> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi: Bump playback substreams to 256Maarten Lankhorst2011-08-243-3/+3
| | | | | | | | | | There are references in the code to 256 sources, so I tested it with 256 aplays, of which the first and last with real data and the rest playing /dev/zero . Also increase amount of page tables, so the default aplay size works. Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: core: release the constraint check for replace opsLu Guanqun2011-08-241-1/+1
| | | | | | | | Suppose the ALSA card already has a number of MAX_USER_CONTROLS controls, and the user wants to replace one, it should not fail at this condition check. Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: core: trivial code style fixLu Guanqun2011-08-241-1/+1
| | | | | | | remove trailing tab on the line. Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio - Check the dB-range validity in the later read, tooTakashi Iwai2011-08-191-2/+11
| | | | | | | | When the initial check of dB-range failed due to the read error, try to check again at the later read, too. When an invalid dB range is found, remove TLV flags and notify the mixer info change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'fix/misc' into topic/miscTakashi Iwai2011-08-194-19/+23
|\
| * ALSA: usb-audio - Fix missing mixer dB informationTakashi Iwai2011-08-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent fix for testing dB range at the mixer creation time seems to cause regressions in some devices. In such devices, reading the dB info at probing time gives an error, thus both dBmin and dBmax are still zero, and TLV flag isn't set although the later read of dB info succeeds. This patch adds a workaround for such a case by assuming that the later read will succeed. In future, a similar test should be performed in a case where a wrong dB range is seen even in the later read. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
| * ALSA: hda - Add "PCM" volume to vmaster slave listTakashi Iwai2011-08-181-0/+2
| | | | | | | | | | | | | | | | | | The new parser may use "PCM" volume, but it was missing the vmaster slave list, thus "Master" volume didn't control it. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=41342 Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Fix duplicated capture-volume creation for ALC268 modelsTakashi Iwai2011-08-161-18/+18
| | | | | | | | | | | | | | | | Fix the duplicated creation of capture-mixer elements for some static ALC268 configurations. The capture mixers must be put to cap_mixer field instead of mixers array. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelistDaniel T Chen2011-08-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/826081 The original reporter needs 'Headphone Jack Sense' enabled to have audible audio, so add his PCI SSID to the whitelist. Reported-and-tested-by: Muhammad Khurram Khan Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Simplify with snd_pcm_hw_constraint_pow2()Takashi Iwai2011-08-151-51/+25
| | | | | | | | | | | | | | Refactoring the code using snd_pcm_hw_constraint_pow2() helper function. Tested-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Add missing KNOT flag for AES32 rate restrictionTakashi Iwai2011-08-151-0/+2
| | | | | | | | | | | | | | | | AES32 supports the non-standard 128kHZ, and this is enabled only when SNDRV_PCM_RATE_KNOT is set in hw.rates field. Tested-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Correct max buffer size limitTakashi Iwai2011-08-151-2/+2
| | | | | | | | | | | | | | Some modesl can support up to 8192 frames per period. Tested-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: virtuoso: fix Essence ST(X) S/PDIF inputClemens Ladisch2011-08-151-0/+1
| | | | | | | | | | | | | | | | On the Xonar Essence ST/STX, the connector J14 has been confirmed to be a digital input, so enable it in the driver. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: isight: remove superfluous fieldClemens Ladisch2011-08-151-1/+0
| | | | | | | | | | | | | | | | | | Remove a field that is not used at all. This remained from earlier tests, but the current driver has decided not to handle iris notifications. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Enable 32 samples/period on RME RayDAT/AIOAdrian Knoth2011-08-151-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | Newer RME cards like RayDAT and AIO support 32 samples per period. This value is encoded as {1,1,1} in the HDSP_LatencyMask bits in the control register. Since {1,1,1} is also the representation for 8192 samples/period on older RME cards, we have to special case 32 samples and 32768 bytes according to the actual card. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Introduce hdspm_get_latency() to harmonize latency calculationAdrian Knoth2011-08-151-5/+23
| | | | | | | | | | | | | | | | | | | | Currently, hdspm_decode_latency is called several times, violating the DRY principle. Given that we need to distinguish between old and new cards when decoding the latency bits in the control register, introduce hdspm_get_latency() to provide the required functionality. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Reorder period sizes according to their bit representationAdrian Knoth2011-08-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On newer RME cards like RayDAT and AIO, the 8192 samples per period size are no longer supported. Instead, setting all three bits of HDSP_LatencyMask to one ({1,1,1}) now corresponds to 32 samples per period. To make this more obvious to future developers, let's reorder the array according to their bit representation, starting at 64 ({0,0,0}) up to 4096 ({1,1,0}) and finally 32 ({1,1,1}). Note that this patch doesn't change semantics. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Set period_bytes_min to 32 * 4 for new RME cardsAdrian Knoth2011-08-151-2/+2
| | | | | | | | | | | | | | | | | | | | On newer RME cards like RayDAT and AIO, the lower bound is 32 samples per period in contrast to 64 samples as seen on older cards. We hence lower period_bytes_min to 32 * 4. Four bytes per sample. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hdspm - Allow for 8192 period size on RME MADI and AES cardsAdrian Knoth2011-08-151-1/+1
|/ | | | | | | | | Older RME cards like MADI and AES support period sizes of 8192 samples. The original hdspm driver already featured this value, apparently, it was lost during the rewrite. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd_usb_caiaq: track submitted output urbsDaniel Mack2011-08-142-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | The snd_usb_caiaq driver currently assumes that output urbs are serviced in time and doesn't track when and whether they are given back by the USB core. That usually works fine, but due to temporary limitations of the XHCI stack, we faced that urbs were submitted more than once with this approach. As it's no good practice to fire and forget urbs anyway, this patch introduces a proper bit mask to track which requests have been submitted and given back. That alone however doesn't make the driver work in case the host controller is broken and doesn't give back urbs at all, and the output stream will stop once all pre-allocated output urbs are consumed. But it does prevent crashes of the controller stack in such cases. See http://bugzilla.kernel.org/show_bug.cgi?id=40702 for more details. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Matej Laitl <matej@laitl.cz> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'fix/asoc' into for-linusTakashi Iwai2011-08-1216-17/+524
|\
| * ASoC: Fix compile warning in wm8750.cTakashi Iwai2011-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | sound/soc/codecs/wm8750.c:784:2: warning: missing braces around initializer sound/soc/codecs/wm8750.c:784:2: warning: (near initialization for ‘wm8750_spi_ids[2].name’) It's because struct spi_device_id.name is a char array, not a pointer, while the driver initializes explicitly with 0. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ASoC: omap: Update e-mail address of Jarkko NikulaJarkko Nikula2011-08-126-9/+9
| | | | | | | | | | | | | | | | My gmail account got disabled and I'm not going to reopen it. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: SAMSUNG: Add I2S0 internal dma driverSangbeom Kim2011-08-123-0/+481
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I2S in Exynos4 and S5PC110(S5PV210) has a internal dma. It can be used low power audio mode and 2nd channel transfer. This patch can support idma. [Reapplied after dependencies propagated through in 3.1-rc1. --broonie] Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Terminate WM8750 SPI device ID tableMark Brown2011-08-111-0/+1
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
| * ASoC: Add missing break in WM8994 probeMark Brown2011-08-111-0/+1
| | | | | | | | | | | | | | | | This error would have no effect on current silicon revisions, the fall through case has the same behaviour. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * ASoC: Fix typo in wm8750 spi_idsMark Brown2011-08-101-1/+1
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
| * ASoC: Fix warning in Speyside WM8962Mark Brown2011-08-101-1/+1
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * ASoC: Fix SPI driver binding for WM8987Mark Brown2011-08-101-0/+7
| | | | | | | | | | | | | | | | As we had no id_table only the driver name would be matched against meaning that WM8987 devices wouldn't be bound. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * ASoC: Fix binding of WM8750 on JiveMark Brown2011-08-101-1/+1
| | | | | | | | | | | | | | | | The I2C address is misformatted and would never match. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
| * ASoC: WM8903: Free IRQ on device removalStephen Warren2011-08-091-0/+5
| | | | | | | | | | | | | | | | | | Without this, request_irq on subsequent device initialization fails, and the codec cannot be used. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Tegra: wm8903 machine driver: Allow re-insertion of moduleStephen Warren2011-08-091-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two issues were preventing module snd-soc-tegra-wm8903.ko from being removed and re-inserted: a) The speaker-enable GPIO is hosted by the WM8903 chip. This GPIO must be freed before snd_soc_unregister_card() is called, because that triggers wm8903.c:wm8903_remove(), which calls gpiochip_remove(), which then fails if any of the GPIOs are in use. To solve this, free all GPIOs first, so the code doesn't care where they come from. b) We need to call snd_soc_jack_free_gpios() to match the call to snd_soc_jack_add_gpios() during initialization. Without this, the call to snd_soc_jack_add_gpios() fails during any subsequent modprobe and initialization, since the GPIO and IRQ are already registered. In turn, this causes the headphone state not to be monitored, so the headphone is assumed not to be plugged in, and the audio path to it is never enabled. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: stable@kernel.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Tegra: tegra_pcm_deallocate_dma_buffer: Don't OOPSStephen Warren2011-08-091-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | Not all PCM devices have all sub-streams. Specifically, the SPDIF driver only supports playback and hence has no capture substream. Check whether a substream exists before dereferencing it, when de-allocating DMA buffers in tegra_pcm_deallocate_dma_buffer. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* | ALSA: snd-usb-caiaq: Correct offset fields of outbound iso_frame_descDaniel Mack2011-08-101-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This fixes faulty outbount packets in case the inbound packets received from the hardware are fragmented and contain bogus input iso frames. The bug has been there for ages, but for some strange reasons, it was only triggered by newer machines in 64bit mode. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: William Light <wrl@illest.net> Reported-by: Pedro Ribeiro <pedrib@gmail.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: azt3328 - adjust error handling code to include debugging codeJulia Lawall2011-08-101-4/+7
| | | | | | | | | | | | | | | | snd_azf3328_dbgcallenter is called at the very beginning of the function, so it could be useful to call snd_azf3328_dbgcallleave at all exit points. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add CONFIG_SND_HDA_POWER_SAVE to stac_vrefout_set()Wang Shaoyan2011-08-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | In commit 45eebda7, it add new function stac_vrefout_set, but it is only used in code between CONFIG_SND_HDA_POWER_SAVE macro, so add the macro to avoid such warning: sound/pci/hda/patch_sigmatel.c:676:12: warning: 'stac_vrefout_set' defined but not used Signed-off-by: Wang Shaoyan <wangshaoyan.pt@taobao.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio - Add quirk for BOSS Micro BR-80Kazutomo Yoshii2011-08-101-0/+34
| | | | | | | | | | Signed-off-by: Kazutomo Yoshii <kazutomo.yoshii@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'fix/asoc' into for-linusTakashi Iwai2011-08-0810-6830/+6770
|\ \ | |/
| * Merge branch 'wm8996-rename' of ↵Takashi Iwai2011-08-08183-29919/+28359
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
| | * ASoC: Acknowledge WM8996 interrupts before acting on themMark Brown2011-08-081-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | This closes the small race between a status being read in response to an interrupt and clearing the interrupt, meaning that if the status changes between those periods we might not get a reassertion of the interrupt. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: Rename WM8915 to WM8996Mark Brown2011-08-088-6735/+6735
| | | | | | | | | | | | | | | | | | | | | | | | | | | For marketing reasons the part will be called WM8996. In order to avoid user confusion rename the driver to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * | ASoC: sgtl5000: fix cache handlingWolfram Sang2011-08-031-93/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cache handling in this driver is broken. The chip has 16-bit registers, yet the register numbers also increase by 2 per register, i.e. there are only even-numbered registers. The cache in this driver, though, simply increments register numbers, so it does need some mapping as seen in sgtl5000_restore_regs(), note the '>> 1': snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, cache[SGTL5000_CHIP_LINREG_CTRL >> 1]); That, of course, won't work with snd_soc_update_bits(). (Thus, we won't even notice the missing register 0x1c in the default regs which shifted all follwing registers to wrong values.) Noticed on the MX28EVK where enabling the regulators simply locked up the chip. Refactor the routines and use a properly sized default_regs array which matches the register layout of the underlying chip, i.e. create a truly flat cache. This also saves some code which should make up for the bigger array a little. When soc-core will somewhen have another cache type which handles a step size, this conversion will also ease the transition. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Dong Aisheng <b29396@freescale.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * | ASoC: Disable wm_hubs periodic DC servo updateMark Brown2011-07-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This does not function correctly in all circumstances so disable the periodic updates unconditionally for stable; a future patch will reenable where appropriate. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* | | Merge branch 'fix/kconfig' into for-linusTakashi Iwai2011-08-0840-805/+514
|\ \ \
OpenPOWER on IntegriCloud